[   30.715068] usb 4-2: [ueagle-atm] modem operational
[   31.101042] sisfb: Video ROM found
[   31.103412] sisfb: Video RAM at 0xf0000000, mapped to 0xf9800000, size 32768k
[   31.103418] sisfb: MMIO at 0xfe9e0000, mapped to 0xf7e80000, size 128k
[   31.103421] sisfb: Memory heap starting at 12288K, size 19960K
[   31.446186] sisfb: CRT1 DDC supported
[   31.446191] sisfb: CRT1 DDC level: 2 
[   31.489948] ADDRCONF(NETDEV_UP): eth1: link is not ready
[   31.492462] eth0:  setting half-duplex.
[   31.492706] ADDRCONF(NETDEV_UP): eth0: link is not ready
[   31.838925] sisfb: Monitor range H 24-80KHz, V 50-75Hz, Max. dotclock 140MHz
[   31.838934] sisfb: Default mode is 800x600x8 (60Hz)
[   31.838943] sisfb: Initial vbflags 0x0
[   31.842055] Console: switching to colour frame buffer device 100x37
[   31.842077] sisfb: 2D acceleration is enabled, y-panning enabled (auto-max)
[   31.842083] fb0: SiS 300/305 frame buffer device version 1.8.9
[   31.842086] sisfb: Copyright (C) 2001-2005 Thomas Winischhofer
[   31.893399] [drm] Initialized drm 1.1.0 20060810
[   32.064113] sisfb 0000:01:00.0: setting latency timer to 64
[   32.064569] [drm] Initialized sis 1.3.0 20070626 on minor 0
[   32.068038] agpgart-intel 0000:00:00.0: AGP 3.0 bridge
[   32.068058] agpgart-intel 0000:00:00.0: bridge is in legacy mode, falling back to 2.x
[   32.068067] agpgart-intel 0000:00:00.0: putting AGP V2 device into 0x mode
[   32.068115] sisfb 0000:01:00.0: putting AGP V2 device into 0x mode
[   33.927582] usb 4-2: [ueagle-atm] modem synchronization failed (may be try other cmv/dsp)
[   33.927588] usb 4-2: [ueagle-atm] (re)booting started
[   35.344030] usb 4-2: firmware: requesting ueagle-atm/DSPep.bin
[   35.601326] usb 4-2: [ueagle-atm] ATU-R firmware version : 44e2ea17
[   35.601333] usb 4-2: firmware: requesting ueagle-atm/CMVep.bin.v2
[   35.606706] usb 4-2: [Ueagle-atm] requesting firmware ueagle-atm/CMVep.bin.v2 failed, try to get older cmvs
[   35.606715] usb 4-2: firmware: requesting ueagle-atm/CMVep.bin
[   35.618598] usb 4-2: [Ueagle-atm] use deprecated cmvs version, please update your firmware
[   35.659316] usb 4-2: [ueagle-atm] modem started, waiting synchronization...
[   36.999007] ppdev0: registered pardevice
[   37.048393] ppdev0: unregistered pardevice
[   46.667639] usb 4-2: [ueagle-atm] modem operational
[   59.391513] CPU0 attaching NULL sched-domain.
[   59.391522] CPU1 attaching NULL sched-domain.
[   59.391629] CPU0 attaching sched-domain:
[   59.391634]  domain 0: span 0-1 level SIBLING
[   59.391638]   groups: 0 1
[   59.391646] CPU1 attaching sched-domain:
[   59.391648]  domain 0: span 0-1 level SIBLING
[   59.391651]   groups: 1 0
[  193.645238] usb 4-2: [UEAGLE-ATM] uea_intr() failed with -84
[  193.705241] usb 4-2: [UEAGLE-ATM] usb_control_msg error -71
[  193.705251] usb 4-2: [UEAGLE-ATM] reading cmv failed with error -71
[  193.840055] usb 4-2: USB disconnect, address 2
[  193.841533] usb 4-2: [UEAGLE-ATM] usb_control_msg error -19
[  193.841972] usb 4-2: [ueagle-atm] ADSL device removed
[  196.128046] usb 4-2: new full speed USB device using uhci_hcd and address 3
[  196.274373] usb 4-2: configuration #1 chosen from 1 choice
[  196.277308] usb 4-2: [ueagle-atm] ADSL device founded vid (0X1110) pid (0X9022) Rev (0X5000): Eagle II
[  196.388617] usb 4-2: reset full speed USB device using uhci_hcd and address 3
[  196.539123] usb 4-2: [ueagle-atm] pre-firmware device, uploading firmware
[  196.539195] usb 4-2: [ueagle-atm] loading firmware ueagle-atm/eagleII.fw
[  196.539200] usb 4-2: firmware: requesting ueagle-atm/eagleII.fw
[  197.204017] usb 4-2: [ueagle-atm] firmware uploaded
[  197.316106] usb 4-2: USB disconnect, address 3
[  199.748035] usb 4-2: new full speed USB device using uhci_hcd and address 4
[  199.911855] usb 4-2: configuration #1 chosen from 1 choice
[  199.967894] usb 4-2: [ueagle-atm] ADSL device founded vid (0X1110) pid (0X9021) Rev (0X500B): Eagle II
[  200.078445] usb 4-2: reset full speed USB device using uhci_hcd and address 4
[  200.295113] usb 4-2: [ueagle-atm] using iso mode
[  200.295297] usb 4-2: [ueagle-atm] (re)booting started
[  201.712027] usb 4-2: firmware: requesting ueagle-atm/DSPep.bin
[  201.976859] usb 4-2: [ueagle-atm] ATU-R firmware version : 44e2ea17
[  201.976866] usb 4-2: firmware: requesting ueagle-atm/CMVep.bin.v2
[  201.981114] usb 4-2: [Ueagle-atm] requesting firmware ueagle-atm/CMVep.bin.v2 failed, try to get older cmvs
[  201.981125] usb 4-2: firmware: requesting ueagle-atm/CMVep.bin
[  201.998796] usb 4-2: [Ueagle-atm] use deprecated cmvs version, please update your firmware
[  202.039929] usb 4-2: [ueagle-atm] modem started, waiting synchronization...
[  206.165442] usbcore: deregistering interface driver ueagle-atm
[  206.172235] usb 4-2: [UEAGLE-ATM] uea_intr() failed with -108
[  206.173526] usb 4-2: [ueagle-atm] ADSL device removed
[  206.173571] [ueagle-atm] driver unloaded
[  206.230363] [ueagle-atm] driver ueagle 1.4 loaded
[  206.230458] usb 4-2: [ueagle-atm] ADSL device founded vid (0X1110) pid (0X9021) Rev (0X500B): Eagle II
[  206.340547] usb 4-2: reset full speed USB device using uhci_hcd and address 4
[  206.556416] usb 4-2: [ueagle-atm] using iso mode
[  206.559319] usbcore: registered new interface driver ueagle-atm
[  206.563041] usb 4-2: [ueagle-atm] (re)booting started
[  207.980332] usb 4-2: firmware: requesting ueagle-atm/DSPep.bin
[  208.251905] usb 4-2: [ueagle-atm] ATU-R firmware version : 44e2ea17
[  208.251913] usb 4-2: firmware: requesting ueagle-atm/CMVep.bin.v2
[  208.259471] usb 4-2: [Ueagle-atm] requesting firmware ueagle-atm/CMVep.bin.v2 failed, try to get older cmvs
[  208.259482] usb 4-2: firmware: requesting ueagle-atm/CMVep.bin
[  208.294779] usb 4-2: [Ueagle-atm] use deprecated cmvs version, please update your firmware
[  208.337896] usb 4-2: [ueagle-atm] modem started, waiting synchronization...
[  228.346896] usb 4-2: [ueagle-atm] modem synchronization failed (may be try other cmv/dsp)
[  228.346904] usb 4-2: [ueagle-atm] (re)booting started
[  229.764094] usb 4-2: firmware: requesting ueagle-atm/DSPep.bin
[  230.028588] usb 4-2: [ueagle-atm] ATU-R firmware version : 44e2ea17
[  230.028596] usb 4-2: firmware: requesting ueagle-atm/CMVep.bin.v2
[  230.034027] usb 4-2: [Ueagle-atm] requesting firmware ueagle-atm/CMVep.bin.v2 failed, try to get older cmvs
[  230.034035] usb 4-2: firmware: requesting ueagle-atm/CMVep.bin
[  230.042434] usb 4-2: [Ueagle-atm] use deprecated cmvs version, please update your firmware
[  230.086575] usb 4-2: [ueagle-atm] modem started, waiting synchronization...
[  241.107894] usb 4-2: [ueagle-atm] modem operational
[  251.315580] NET: Registered protocol family 24
[  259.180033] nas0: no IPv6 routers present
[  856.605863] kvm: no hardware support