[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.31-20-generic (buildd@crested) (gcc version 4.4.1 (Ubuntu 4.4.1-4ubuntu8) ) #58-Ubuntu SMP Fri Mar 12 04:38:19 UTC 2010 (Ubuntu 2.6.31-20.58-generic) [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-2.6.31-20-generic root=UUID=0a03bba2-be0c-4f77-a393-dd39ff775ea9 ro crashkernel=384M-2G:64M,2G-:128M quiet splash [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Centaur CentaurHauls [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable) [ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 00000000cfde0000 (usable) [ 0.000000] BIOS-e820: 00000000cfde0000 - 00000000cfde3000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000cfde3000 - 00000000cfdf0000 (ACPI data) [ 0.000000] BIOS-e820: 00000000cfdf0000 - 00000000cfe00000 (reserved) [ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved) [ 0.000000] BIOS-e820: 0000000100000000 - 0000000130000000 (usable) [ 0.000000] DMI 2.4 present. [ 0.000000] last_pfn = 0x130000 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-C7FFF write-protect [ 0.000000] C8000-FFFFF uncachable [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000000 mask FFFF80000000 write-back [ 0.000000] 1 base 000080000000 mask FFFFC0000000 write-back [ 0.000000] 2 base 0000C0000000 mask FFFFF0000000 write-back [ 0.000000] 3 base 0000CFE00000 mask FFFFFFE00000 uncachable [ 0.000000] 4 base 000100000000 mask FFFFE0000000 write-back [ 0.000000] 5 base 000120000000 mask FFFFF0000000 write-back [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] TOM2: 0000000130000000 aka 4864M [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] e820 update range: 00000000cfe00000 - 0000000100000000 (usable) ==> (reserved) [ 0.000000] last_pfn = 0xcfde0 max_arch_pfn = 0x400000000 [ 0.000000] e820 update range: 0000000000001000 - 0000000000006000 (usable) ==> (reserved) [ 0.000000] Scanning 1 areas for low memory corruption [ 0.000000] modified physical RAM map: [ 0.000000] modified: 0000000000000000 - 0000000000001000 (usable) [ 0.000000] modified: 0000000000001000 - 0000000000006000 (reserved) [ 0.000000] modified: 0000000000006000 - 000000000009f800 (usable) [ 0.000000] modified: 000000000009f800 - 00000000000a0000 (reserved) [ 0.000000] modified: 00000000000f0000 - 0000000000100000 (reserved) [ 0.000000] modified: 0000000000100000 - 00000000cfde0000 (usable) [ 0.000000] modified: 00000000cfde0000 - 00000000cfde3000 (ACPI NVS) [ 0.000000] modified: 00000000cfde3000 - 00000000cfdf0000 (ACPI data) [ 0.000000] modified: 00000000cfdf0000 - 00000000cfe00000 (reserved) [ 0.000000] modified: 00000000e0000000 - 00000000f0000000 (reserved) [ 0.000000] modified: 00000000fec00000 - 0000000100000000 (reserved) [ 0.000000] modified: 0000000100000000 - 0000000130000000 (usable) [ 0.000000] initial memory mapped : 0 - 20000000 [ 0.000000] Using GB pages for direct mapping [ 0.000000] init_memory_mapping: 0000000000000000-00000000cfde0000 [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] 0000000000 - 00c0000000 page 1G [ 0.000000] 00c0000000 - 00cfc00000 page 2M [ 0.000000] 00cfc00000 - 00cfde0000 page 4k [ 0.000000] kernel direct mapping tables up to cfde0000 @ 8000-b000 [ 0.000000] init_memory_mapping: 0000000100000000-0000000130000000 [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] 0100000000 - 0130000000 page 2M [ 0.000000] kernel direct mapping tables up to 130000000 @ a000-c000 [ 0.000000] RAMDISK: 377cf000 - 37fef1b0 [ 0.000000] ACPI: RSDP 00000000000f6fd0 00014 (v00 GBT ) [ 0.000000] ACPI: RSDT 00000000cfde3000 00038 (v01 GBT GBTUACPI 42302E31 GBTU 01010101) [ 0.000000] ACPI: FACP 00000000cfde3040 00074 (v01 GBT GBTUACPI 42302E31 GBTU 01010101) [ 0.000000] ACPI: DSDT 00000000cfde30c0 041E7 (v01 GBT GBTUACPI 00001000 MSFT 03000000) [ 0.000000] ACPI: FACS 00000000cfde0000 00040 [ 0.000000] ACPI: SSDT 00000000cfde7380 00544 (v01 PTLTD POWERNOW 00000001 LTP 00000001) [ 0.000000] ACPI: HPET 00000000cfde7900 00038 (v01 GBT GBTUACPI 42302E31 GBTU 00000098) [ 0.000000] ACPI: MCFG 00000000cfde7940 0003C (v01 GBT GBTUACPI 42302E31 GBTU 01010101) [ 0.000000] ACPI: APIC 00000000cfde72c0 00084 (v01 GBT GBTUACPI 42302E31 GBTU 01010101) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] Scanning NUMA topology in Northbridge 24 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at 0000000000000000-0000000130000000 [ 0.000000] Bootmem setup node 0 0000000000000000-0000000130000000 [ 0.000000] NODE_DATA [000000000000b000 - 000000000000ffff] [ 0.000000] bootmap [0000000000010000 - 0000000000035fff] pages 26 [ 0.000000] (8 early reservations) ==> bootmem [0000000000 - 0130000000] [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] [ 0.000000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000] [ 0.000000] #2 [0001000000 - 00019e8c8c] TEXT DATA BSS ==> [0001000000 - 00019e8c8c] [ 0.000000] #3 [00377cf000 - 0037fef1b0] RAMDISK ==> [00377cf000 - 0037fef1b0] [ 0.000000] #4 [000009f800 - 0000100000] BIOS reserved ==> [000009f800 - 0000100000] [ 0.000000] #5 [00019e9000 - 00019e90fe] BRK ==> [00019e9000 - 00019e90fe] [ 0.000000] #6 [0000008000 - 000000a000] PGTABLE ==> [0000008000 - 000000a000] [ 0.000000] #7 [000000a000 - 000000b000] PGTABLE ==> [000000a000 - 000000b000] [ 0.000000] found SMP MP-table at [ffff8800000f5600] f5600 [ 0.000000] Reserving 128MB of memory at 32MB for crashkernel (System RAM: 4864MB) [ 0.000000] [ffffea0000000000-ffffea00043fffff] PMD -> [ffff880028600000-ffff88002bffffff] on node 0 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000000 -> 0x00001000 [ 0.000000] DMA32 0x00001000 -> 0x00100000 [ 0.000000] Normal 0x00100000 -> 0x00130000 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[4] active PFN ranges [ 0.000000] 0: 0x00000000 -> 0x00000001 [ 0.000000] 0: 0x00000006 -> 0x0000009f [ 0.000000] 0: 0x00000100 -> 0x000cfde0 [ 0.000000] 0: 0x00100000 -> 0x00130000 [ 0.000000] On node 0 totalpages: 1047930 [ 0.000000] DMA zone: 56 pages used for memmap [ 0.000000] DMA zone: 102 pages reserved [ 0.000000] DMA zone: 3836 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 14280 pages used for memmap [ 0.000000] DMA32 zone: 833048 pages, LIFO batch:31 [ 0.000000] Normal zone: 2688 pages used for memmap [ 0.000000] Normal zone: 193920 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0x4008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 33, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x10b9a201 base: 0xfed00000 [ 0.000000] SMP: Allowing 4 CPUs, 0 hotplug CPUs [ 0.000000] nr_irqs_gsi: 24 [ 0.000000] PM: Registered nosave memory: 0000000000001000 - 0000000000006000 [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000 [ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000 [ 0.000000] PM: Registered nosave memory: 00000000cfde0000 - 00000000cfde3000 [ 0.000000] PM: Registered nosave memory: 00000000cfde3000 - 00000000cfdf0000 [ 0.000000] PM: Registered nosave memory: 00000000cfdf0000 - 00000000cfe00000 [ 0.000000] PM: Registered nosave memory: 00000000cfe00000 - 00000000e0000000 [ 0.000000] PM: Registered nosave memory: 00000000e0000000 - 00000000f0000000 [ 0.000000] PM: Registered nosave memory: 00000000f0000000 - 00000000fec00000 [ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 0000000100000000 [ 0.000000] Allocating PCI resources starting at cfe00000 (gap: cfe00000:10200000) [ 0.000000] NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:4 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 30 pages at ffff880028022000, static data 90720 bytes [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1030804 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.31-20-generic root=UUID=0a03bba2-be0c-4f77-a393-dd39ff775ea9 ro crashkernel=384M-2G:64M,2G-:128M quiet splash [ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes) [ 0.000000] Initializing CPU#0 [ 0.000000] Checking aperture... [ 0.000000] No AGP bridge found [ 0.000000] Node 0: aperture @ 20000000 size 32 MB [ 0.000000] Aperture pointing to e820 RAM. Ignoring. [ 0.000000] Your BIOS doesn't leave a aperture memory hole [ 0.000000] Please enable the IOMMU option in the BIOS setup [ 0.000000] This costs you 64 MB of RAM [ 0.000000] Mapping aperture over 65536 KB of RAM @ 20000000 [ 0.000000] PM: Registered nosave memory: 0000000020000000 - 0000000024000000 [ 0.000000] Memory: 3916516k/4980736k available (5327k kernel code, 789016k absent, 275204k reserved, 3014k data, 664k init) [ 0.000000] SLUB: Genslabs=14, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] NR_IRQS:4352 nr_irqs:440 [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 2416.862 MHz processor. [ 0.000011] spurious 8259A interrupt: IRQ7. [ 0.002146] Console: colour VGA+ 80x25 [ 0.002149] console [tty0] enabled [ 0.010000] allocated 41943040 bytes of page_cgroup [ 0.010000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.010000] hpet clockevent registered [ 0.010000] alloc irq_desc for 24 on node 0 [ 0.010000] alloc kstat_irqs on node 0 [ 0.010000] HPET: 4 timers in total, 1 timers will be used for per-cpu timer [ 0.010006] Calibrating delay loop (skipped), value calculated using timer frequency.. 4833.71 BogoMIPS (lpj=24168590) [ 0.010026] Security Framework initialized [ 0.010044] AppArmor: AppArmor initialized [ 0.010370] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.011871] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.012542] Mount-cache hash table entries: 256 [ 0.012660] Initializing cgroup subsys ns [ 0.012663] Initializing cgroup subsys cpuacct [ 0.012667] Initializing cgroup subsys memory [ 0.012673] Initializing cgroup subsys freezer [ 0.012675] Initializing cgroup subsys net_cls [ 0.012685] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 0.012687] CPU: L2 Cache: 512K (64 bytes/line) [ 0.012690] CPU 0/0x0 -> Node 0 [ 0.012693] tseg: 00cfe00000 [ 0.012694] CPU: Physical Processor ID: 0 [ 0.012696] CPU: Processor Core ID: 0 [ 0.012698] mce: CPU supports 6 MCE banks [ 0.012706] using C1E aware idle routine [ 0.012707] Performance Counters: AMD PMU driver. [ 0.012712] ... version: 0 [ 0.012713] ... bit width: 48 [ 0.012714] ... generic counters: 4 [ 0.012716] ... value mask: 0000ffffffffffff [ 0.012717] ... max period: 00007fffffffffff [ 0.012719] ... fixed-purpose counters: 0 [ 0.012720] ... counter mask: 000000000000000f [ 0.014165] ACPI: Core revision 20090521 [ 0.020080] Setting APIC routing to flat [ 0.020578] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.124251] CPU0: AMD Phenom(tm) 9750 Quad-Core Processor stepping 03 [ 0.130000] Booting processor 1 APIC 0x1 ip 0x6000 [ 0.010000] Initializing CPU#1 [ 0.010000] Calibrating delay using timer specific routine.. 4834.21 BogoMIPS (lpj=24171053) [ 0.010000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 0.010000] CPU: L2 Cache: 512K (64 bytes/line) [ 0.010000] CPU 1/0x1 -> Node 0 [ 0.010000] CPU: Physical Processor ID: 0 [ 0.010000] CPU: Processor Core ID: 1 [ 0.010000] mce: CPU supports 6 MCE banks [ 0.010000] x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106 [ 0.280591] CPU1: AMD Phenom(tm) 9750 Quad-Core Processor stepping 03 [ 0.280598] checking TSC synchronization [CPU#0 -> CPU#1]: passed. [ 0.290056] Booting processor 2 APIC 0x2 ip 0x6000 [ 0.010000] Initializing CPU#2 [ 0.010000] Calibrating delay using timer specific routine.. 4834.13 BogoMIPS (lpj=24170651) [ 0.010000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 0.010000] CPU: L2 Cache: 512K (64 bytes/line) [ 0.010000] CPU 2/0x2 -> Node 0 [ 0.010000] CPU: Physical Processor ID: 0 [ 0.010000] CPU: Processor Core ID: 3 [ 0.010000] mce: CPU supports 6 MCE banks [ 0.010000] x86 PAT enabled: cpu 2, old 0x7040600070406, new 0x7010600070106 [ 0.450619] CPU2: AMD Phenom(tm) 9750 Quad-Core Processor stepping 03 [ 0.450625] checking TSC synchronization [CPU#0 -> CPU#2]: passed. [ 0.460056] Booting processor 3 APIC 0x3 ip 0x6000 [ 0.010000] Initializing CPU#3 [ 0.010000] Calibrating delay using timer specific routine.. 4834.10 BogoMIPS (lpj=24170542) [ 0.010000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 0.010000] CPU: L2 Cache: 512K (64 bytes/line) [ 0.010000] CPU 3/0x3 -> Node 0 [ 0.010000] CPU: Physical Processor ID: 0 [ 0.010000] CPU: Processor Core ID: 2 [ 0.010000] mce: CPU supports 6 MCE banks [ 0.010000] x86 PAT enabled: cpu 3, old 0x7040600070406, new 0x7010600070106 [ 0.620643] CPU3: AMD Phenom(tm) 9750 Quad-Core Processor stepping 03 [ 0.620649] checking TSC synchronization [CPU#0 -> CPU#3]: passed. [ 0.630010] Brought up 4 CPUs [ 0.630012] Total of 4 processors activated (19336.16 BogoMIPS). [ 0.630113] CPU0 attaching sched-domain: [ 0.630116] domain 0: span 0-3 level MC [ 0.630118] groups: 0 1 2 3 [ 0.630123] CPU1 attaching sched-domain: [ 0.630125] domain 0: span 0-3 level MC [ 0.630127] groups: 1 2 3 0 [ 0.630130] CPU2 attaching sched-domain: [ 0.630132] domain 0: span 0-3 level MC [ 0.630133] groups: 2 3 0 1 [ 0.630139] CPU3 attaching sched-domain: [ 0.630140] domain 0: span 0-3 level MC [ 0.630142] groups: 3 0 1 2 [ 0.630216] Booting paravirtualized kernel on bare hardware [ 0.630216] regulator: core version 0.5 [ 0.630216] Time: 12:27:15 Date: 03/23/10 [ 0.630216] NET: Registered protocol family 16 [ 0.630216] node 0 link 0: io port [c000, ffff] [ 0.630216] TOM: 00000000d0000000 aka 3328M [ 0.630216] Fam 10h mmconf [e0000000, e00fffff] [ 0.630216] node 0 link 0: mmio [a0000, bffff] [ 0.630216] node 0 link 0: mmio [d0000000, dfffffff] [ 0.630216] node 0 link 0: mmio [f0000000, fe02ffff] [ 0.630216] node 0 link 0: mmio [e0000000, e03fffff] ==> [e0100000, e03fffff] [ 0.630216] TOM2: 0000000130000000 aka 4864M [ 0.630216] bus: [00,03] on node 0 link 0 [ 0.630216] bus: 00 index 0 io port: [0, ffff] [ 0.630216] bus: 00 index 1 mmio: [a0000, bffff] [ 0.630216] bus: 00 index 2 mmio: [d0000000, dfffffff] [ 0.630216] bus: 00 index 3 mmio: [e0400000, ffffffff] [ 0.630216] bus: 00 index 4 mmio: [e0100000, e03fffff] [ 0.630216] bus: 00 index 5 mmio: [130000000, fcffffffff] [ 0.630216] ACPI: bus type pci registered [ 0.630269] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255 [ 0.630272] PCI: MCFG area at e0000000 reserved in E820 [ 0.638626] PCI: Using MMCONFIG at e0000000 - efffffff [ 0.638628] PCI: Using configuration type 1 for base access [ 0.640437] bio: create slab at 0 [ 0.640437] ACPI: EC: Look up EC in DSDT [ 0.647226] ACPI: Interpreter enabled [ 0.647232] ACPI: (supports S0 S3 S4 S5) [ 0.647252] ACPI: Using IOAPIC for interrupt routing [ 0.651622] ACPI: No dock devices found. [ 0.651735] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 0.651800] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold [ 0.651802] pci 0000:00:02.0: PME# disabled [ 0.651832] pci 0000:00:06.0: PME# supported from D0 D3hot D3cold [ 0.651834] pci 0000:00:06.0: PME# disabled [ 0.651887] pci 0000:00:11.0: reg 10 io port: [0xff00-0xff07] [ 0.651894] pci 0000:00:11.0: reg 14 io port: [0xfe00-0xfe03] [ 0.651900] pci 0000:00:11.0: reg 18 io port: [0xfd00-0xfd07] [ 0.651906] pci 0000:00:11.0: reg 1c io port: [0xfc00-0xfc03] [ 0.651913] pci 0000:00:11.0: reg 20 io port: [0xfb00-0xfb0f] [ 0.651919] pci 0000:00:11.0: reg 24 32bit mmio: [0xfe02f000-0xfe02f3ff] [ 0.651970] pci 0000:00:12.0: reg 10 32bit mmio: [0xfe02e000-0xfe02efff] [ 0.652023] pci 0000:00:12.1: reg 10 32bit mmio: [0xfe02d000-0xfe02dfff] [ 0.652092] pci 0000:00:12.2: reg 10 32bit mmio: [0xfe02c000-0xfe02c0ff] [ 0.652143] pci 0000:00:12.2: supports D1 D2 [ 0.652144] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot [ 0.652148] pci 0000:00:12.2: PME# disabled [ 0.652179] pci 0000:00:13.0: reg 10 32bit mmio: [0xfe02b000-0xfe02bfff] [ 0.652231] pci 0000:00:13.1: reg 10 32bit mmio: [0xfe02a000-0xfe02afff] [ 0.652300] pci 0000:00:13.2: reg 10 32bit mmio: [0xfe029000-0xfe0290ff] [ 0.652350] pci 0000:00:13.2: supports D1 D2 [ 0.652352] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot [ 0.652356] pci 0000:00:13.2: PME# disabled [ 0.652470] pci 0000:00:14.1: reg 10 io port: [0x00-0x07] [ 0.652476] pci 0000:00:14.1: reg 14 io port: [0x00-0x03] [ 0.652482] pci 0000:00:14.1: reg 18 io port: [0x00-0x07] [ 0.652488] pci 0000:00:14.1: reg 1c io port: [0x00-0x03] [ 0.652495] pci 0000:00:14.1: reg 20 io port: [0xfa00-0xfa0f] [ 0.652558] pci 0000:00:14.2: reg 10 64bit mmio: [0xfe024000-0xfe027fff] [ 0.652600] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold [ 0.652604] pci 0000:00:14.2: PME# disabled [ 0.652703] pci 0000:00:14.5: reg 10 32bit mmio: [0xfe028000-0xfe028fff] [ 0.652834] pci 0000:01:00.0: reg 10 32bit mmio: [0xfa000000-0xfaffffff] [ 0.652842] pci 0000:01:00.0: reg 14 64bit mmio: [0xd0000000-0xdfffffff] [ 0.652850] pci 0000:01:00.0: reg 1c 64bit mmio: [0xf8000000-0xf9ffffff] [ 0.652855] pci 0000:01:00.0: reg 24 io port: [0xef00-0xef7f] [ 0.652860] pci 0000:01:00.0: reg 30 32bit mmio: [0x000000-0x07ffff] [ 0.652929] pci 0000:00:02.0: bridge io port: [0xe000-0xefff] [ 0.652931] pci 0000:00:02.0: bridge 32bit mmio: [0xf8000000-0xfbffffff] [ 0.652935] pci 0000:00:02.0: bridge 64bit mmio pref: [0xd0000000-0xdfffffff] [ 0.652967] pci 0000:02:00.0: reg 10 io port: [0xde00-0xdeff] [ 0.652981] pci 0000:02:00.0: reg 18 64bit mmio: [0xfdfff000-0xfdffffff] [ 0.652991] pci 0000:02:00.0: reg 20 64bit mmio: [0xfdfe0000-0xfdfeffff] [ 0.652998] pci 0000:02:00.0: reg 30 32bit mmio: [0x000000-0x00ffff] [ 0.653026] pci 0000:02:00.0: supports D1 D2 [ 0.653027] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.653031] pci 0000:02:00.0: PME# disabled [ 0.653094] pci 0000:00:06.0: bridge io port: [0xd000-0xdfff] [ 0.653097] pci 0000:00:06.0: bridge 32bit mmio: [0xfdc00000-0xfdcfffff] [ 0.653100] pci 0000:00:06.0: bridge 64bit mmio pref: [0xfdf00000-0xfdffffff] [ 0.653150] pci 0000:03:06.0: reg 10 32bit mmio: [0xfdef8000-0xfdefffff] [ 0.653256] pci 0000:00:14.4: transparent bridge [ 0.653260] pci 0000:00:14.4: bridge io port: [0xc000-0xcfff] [ 0.653264] pci 0000:00:14.4: bridge 32bit mmio: [0xfde00000-0xfdefffff] [ 0.653269] pci 0000:00:14.4: bridge 32bit mmio pref: [0xfdd00000-0xfddfffff] [ 0.653281] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.653473] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P_._PRT] [ 0.653537] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE2._PRT] [ 0.653597] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE6._PRT] [ 0.672223] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 11) *0, disabled. [ 0.672311] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 11) *0, disabled. [ 0.672399] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11) *0, disabled. [ 0.672487] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11) *0, disabled. [ 0.672575] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11) *0, disabled. [ 0.672663] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11) *0, disabled. [ 0.672750] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 10 11) *0, disabled. [ 0.672838] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 10 11) *0, disabled. [ 0.672975] SCSI subsystem initialized [ 0.673011] libata version 3.00 loaded. [ 0.673011] usbcore: registered new interface driver usbfs [ 0.673011] usbcore: registered new interface driver hub [ 0.673011] usbcore: registered new device driver usb [ 0.673011] ACPI: WMI: Mapper loaded [ 0.673011] PCI: Using ACPI for IRQ routing [ 0.720005] Bluetooth: Core ver 2.15 [ 0.720017] NET: Registered protocol family 31 [ 0.720017] Bluetooth: HCI device and connection manager initialized [ 0.720017] Bluetooth: HCI socket layer initialized [ 0.720017] NetLabel: Initializing [ 0.720017] NetLabel: domain hash size = 128 [ 0.720017] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.720027] NetLabel: unlabeled traffic allowed by default [ 0.720175] PCI-DMA: Disabling AGP. [ 0.720246] PCI-DMA: aperture base @ 20000000 size 65536 KB [ 0.720247] PCI-DMA: using GART IOMMU. [ 0.720250] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture [ 0.721665] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 24, 0 [ 0.721672] hpet0: 4 comparators, 32-bit 14.318180 MHz counter [ 0.730044] hpet: hpet2 irq 24 for MSI [ 0.740020] Switched to high resolution mode on CPU 0 [ 0.740541] Switched to high resolution mode on CPU 1 [ 0.740560] Switched to high resolution mode on CPU 2 [ 0.740583] Switched to high resolution mode on CPU 3 [ 0.760026] pnp: PnP ACPI init [ 0.760041] ACPI: bus type pnp registered [ 0.762307] pnp: PnP ACPI: found 11 devices [ 0.762309] ACPI: ACPI bus type pnp unregistered [ 0.762319] system 00:01: ioport range 0x4d0-0x4d1 has been reserved [ 0.762321] system 00:01: ioport range 0x220-0x225 has been reserved [ 0.762323] system 00:01: ioport range 0x290-0x294 has been reserved [ 0.762327] system 00:02: ioport range 0x4100-0x411f has been reserved [ 0.762329] system 00:02: ioport range 0x228-0x22f has been reserved [ 0.762332] system 00:02: ioport range 0x238-0x23f has been reserved [ 0.762334] system 00:02: ioport range 0x40b-0x40b has been reserved [ 0.762339] system 00:02: ioport range 0x4d6-0x4d6 has been reserved [ 0.762341] system 00:02: ioport range 0xc00-0xc01 has been reserved [ 0.762344] system 00:02: ioport range 0xc14-0xc14 has been reserved [ 0.762346] system 00:02: ioport range 0xc50-0xc52 has been reserved [ 0.762348] system 00:02: ioport range 0xc6c-0xc6d has been reserved [ 0.762351] system 00:02: ioport range 0xc6f-0xc6f has been reserved [ 0.762354] system 00:02: ioport range 0xcd0-0xcd1 has been reserved [ 0.762356] system 00:02: ioport range 0xcd2-0xcd3 has been reserved [ 0.762360] system 00:02: ioport range 0xcd4-0xcdf has been reserved [ 0.762362] system 00:02: ioport range 0x4000-0x40fe has been reserved [ 0.762364] system 00:02: ioport range 0x4210-0x4217 has been reserved [ 0.762366] system 00:02: ioport range 0xb00-0xb0f has been reserved [ 0.762369] system 00:02: ioport range 0xb10-0xb1f has been reserved [ 0.762371] system 00:02: ioport range 0xb20-0xb3f has been reserved [ 0.762376] system 00:09: iomem range 0xe0000000-0xefffffff has been reserved [ 0.762380] system 00:0a: iomem range 0xd1a00-0xd3fff has been reserved [ 0.762382] system 00:0a: iomem range 0xf0000-0xf7fff could not be reserved [ 0.762389] system 00:0a: iomem range 0xf8000-0xfbfff could not be reserved [ 0.762391] system 00:0a: iomem range 0xfc000-0xfffff could not be reserved [ 0.762393] system 00:0a: iomem range 0xcfde0000-0xcfdfffff could not be reserved [ 0.762396] system 00:0a: iomem range 0xffff0000-0xffffffff has been reserved [ 0.762398] system 00:0a: iomem range 0x0-0x9ffff could not be reserved [ 0.762400] system 00:0a: iomem range 0x100000-0xcfddffff could not be reserved [ 0.762403] system 00:0a: iomem range 0xfec00000-0xfec00fff could not be reserved [ 0.762405] system 00:0a: iomem range 0xfee00000-0xfee00fff has been reserved [ 0.762407] system 00:0a: iomem range 0xfff80000-0xfffeffff has been reserved [ 0.767042] AppArmor: AppArmor Filesystem Enabled [ 0.767068] pci 0000:00:02.0: PCI bridge, secondary bus 0000:01 [ 0.767070] pci 0000:00:02.0: IO window: 0xe000-0xefff [ 0.767073] pci 0000:00:02.0: MEM window: 0xf8000000-0xfbffffff [ 0.767076] pci 0000:00:02.0: PREFETCH window: 0x000000d0000000-0x000000dfffffff [ 0.767080] pci 0000:00:06.0: PCI bridge, secondary bus 0000:02 [ 0.767083] pci 0000:00:06.0: IO window: 0xd000-0xdfff [ 0.767085] pci 0000:00:06.0: MEM window: 0xfdc00000-0xfdcfffff [ 0.767088] pci 0000:00:06.0: PREFETCH window: 0x000000fdf00000-0x000000fdffffff [ 0.767091] pci 0000:00:14.4: PCI bridge, secondary bus 0000:03 [ 0.767094] pci 0000:00:14.4: IO window: 0xc000-0xcfff [ 0.767099] pci 0000:00:14.4: MEM window: 0xfde00000-0xfdefffff [ 0.767103] pci 0000:00:14.4: PREFETCH window: 0xfdd00000-0xfddfffff [ 0.767112] pci 0000:00:02.0: setting latency timer to 64 [ 0.767116] pci 0000:00:06.0: setting latency timer to 64 [ 0.767124] pci_bus 0000:00: resource 0 io: [0x00-0xffff] [ 0.767126] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff] [ 0.767128] pci_bus 0000:01: resource 0 io: [0xe000-0xefff] [ 0.767131] pci_bus 0000:01: resource 1 mem: [0xf8000000-0xfbffffff] [ 0.767133] pci_bus 0000:01: resource 2 pref mem [0xd0000000-0xdfffffff] [ 0.767135] pci_bus 0000:02: resource 0 io: [0xd000-0xdfff] [ 0.767137] pci_bus 0000:02: resource 1 mem: [0xfdc00000-0xfdcfffff] [ 0.767139] pci_bus 0000:02: resource 2 pref mem [0xfdf00000-0xfdffffff] [ 0.767141] pci_bus 0000:03: resource 0 io: [0xc000-0xcfff] [ 0.767143] pci_bus 0000:03: resource 1 mem: [0xfde00000-0xfdefffff] [ 0.767145] pci_bus 0000:03: resource 2 pref mem [0xfdd00000-0xfddfffff] [ 0.767147] pci_bus 0000:03: resource 3 io: [0x00-0xffff] [ 0.767149] pci_bus 0000:03: resource 4 mem: [0x000000-0xffffffffffffffff] [ 0.767181] NET: Registered protocol family 2 [ 0.767337] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.768429] TCP established hash table entries: 524288 (order: 11, 8388608 bytes) [ 0.771323] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.771674] TCP: Hash tables configured (established 524288 bind 65536) [ 0.771676] TCP reno registered [ 0.771769] NET: Registered protocol family 1 [ 0.771822] Trying to unpack rootfs image as initramfs... [ 0.938587] Freeing initrd memory: 8320k freed [ 0.941764] Scanning for low memory corruption every 60 seconds [ 0.941867] audit: initializing netlink socket (disabled) [ 0.941880] type=2000 audit(1269347235.940:1): initialized [ 0.949080] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.950402] VFS: Disk quotas dquot_6.5.2 [ 0.950452] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.950985] fuse init (API version 7.12) [ 0.951053] msgmni has been set to 7665 [ 0.951267] alg: No test for stdrng (krng) [ 0.951277] io scheduler noop registered [ 0.951279] io scheduler anticipatory registered [ 0.951281] io scheduler deadline registered [ 0.951317] io scheduler cfq registered (default) [ 1.100057] pci 0000:01:00.0: Boot video device [ 1.100212] alloc irq_desc for 25 on node 0 [ 1.100214] alloc kstat_irqs on node 0 [ 1.100221] pcieport-driver 0000:00:02.0: irq 25 for MSI/MSI-X [ 1.100225] pcieport-driver 0000:00:02.0: setting latency timer to 64 [ 1.100310] alloc irq_desc for 26 on node 0 [ 1.100312] alloc kstat_irqs on node 0 [ 1.100315] pcieport-driver 0000:00:06.0: irq 26 for MSI/MSI-X [ 1.100319] pcieport-driver 0000:00:06.0: setting latency timer to 64 [ 1.100363] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 1.100383] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 1.100479] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0 [ 1.100482] ACPI: Power Button [PWRF] [ 1.100520] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1 [ 1.100522] ACPI: Power Button [PWRB] [ 1.100759] processor LNXCPU:00: registered as cooling_device0 [ 1.100787] processor LNXCPU:01: registered as cooling_device1 [ 1.100815] processor LNXCPU:02: registered as cooling_device2 [ 1.100844] processor LNXCPU:03: registered as cooling_device3 [ 1.103387] Linux agpgart interface v0.103 [ 1.103395] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.104262] brd: module loaded [ 1.104580] loop: module loaded [ 1.104637] input: Macintosh mouse button emulation as /devices/virtual/input/input2 [ 1.104730] ahci 0000:00:11.0: version 3.0 [ 1.104742] alloc irq_desc for 22 on node 0 [ 1.104743] alloc kstat_irqs on node 0 [ 1.104752] ahci 0000:00:11.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 [ 1.104871] ahci 0000:00:11.0: AHCI 0001.0100 32 slots 6 ports 3 Gbps 0x3f impl SATA mode [ 1.104875] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part [ 1.105217] scsi0 : ahci [ 1.105296] scsi1 : ahci [ 1.105338] scsi2 : ahci [ 1.105382] scsi3 : ahci [ 1.105422] scsi4 : ahci [ 1.105463] scsi5 : ahci [ 1.105561] ata1: SATA max UDMA/133 irq_stat 0x00400000, PHY RDY changed irq 22 [ 1.105564] ata2: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f180 irq 22 [ 1.105568] ata3: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f200 irq 22 [ 1.105571] ata4: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f280 irq 22 [ 1.105574] ata5: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f300 irq 22 [ 1.105577] ata6: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f380 irq 22 [ 1.105806] alloc irq_desc for 16 on node 0 [ 1.105807] alloc kstat_irqs on node 0 [ 1.105816] pata_atiixp 0000:00:14.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 1.105918] scsi6 : pata_atiixp [ 1.105969] scsi7 : pata_atiixp [ 1.106856] ata7: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xfa00 irq 14 [ 1.106858] ata8: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xfa08 irq 15 [ 1.107319] Fixed MDIO Bus: probed [ 1.107343] PPP generic driver version 2.4.2 [ 1.107414] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.107457] alloc irq_desc for 17 on node 0 [ 1.107459] alloc kstat_irqs on node 0 [ 1.107467] ehci_hcd 0000:00:12.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 1.107484] ehci_hcd 0000:00:12.2: EHCI Host Controller [ 1.107516] ehci_hcd 0000:00:12.2: new USB bus registered, assigned bus number 1 [ 1.107538] ehci_hcd 0000:00:12.2: applying AMD SB600/SB700 USB freeze workaround [ 1.107556] ehci_hcd 0000:00:12.2: debug port 1 [ 1.107580] ehci_hcd 0000:00:12.2: irq 17, io mem 0xfe02c000 [ 1.120023] ehci_hcd 0000:00:12.2: USB 2.0 started, EHCI 1.00 [ 1.120074] usb usb1: configuration #1 chosen from 1 choice [ 1.120097] hub 1-0:1.0: USB hub found [ 1.120103] hub 1-0:1.0: 6 ports detected [ 1.120181] alloc irq_desc for 19 on node 0 [ 1.120182] alloc kstat_irqs on node 0 [ 1.120189] ehci_hcd 0000:00:13.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 1.120198] ehci_hcd 0000:00:13.2: EHCI Host Controller [ 1.120219] ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 2 [ 1.120238] ehci_hcd 0000:00:13.2: applying AMD SB600/SB700 USB freeze workaround [ 1.120254] ehci_hcd 0000:00:13.2: debug port 1 [ 1.120275] ehci_hcd 0000:00:13.2: irq 19, io mem 0xfe029000 [ 1.140028] ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00 [ 1.140077] usb usb2: configuration #1 chosen from 1 choice [ 1.140098] hub 2-0:1.0: USB hub found [ 1.140102] hub 2-0:1.0: 6 ports detected [ 1.140155] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.140183] ohci_hcd 0000:00:12.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 1.140193] ohci_hcd 0000:00:12.0: OHCI Host Controller [ 1.140217] ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 3 [ 1.140247] ohci_hcd 0000:00:12.0: irq 16, io mem 0xfe02e000 [ 1.204080] usb usb3: configuration #1 chosen from 1 choice [ 1.204101] hub 3-0:1.0: USB hub found [ 1.204108] hub 3-0:1.0: 3 ports detected [ 1.204169] ohci_hcd 0000:00:12.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 1.204177] ohci_hcd 0000:00:12.1: OHCI Host Controller [ 1.204196] ohci_hcd 0000:00:12.1: new USB bus registered, assigned bus number 4 [ 1.204213] ohci_hcd 0000:00:12.1: irq 16, io mem 0xfe02d000 [ 1.264073] usb usb4: configuration #1 chosen from 1 choice [ 1.264090] hub 4-0:1.0: USB hub found [ 1.264096] hub 4-0:1.0: 3 ports detected [ 1.264167] alloc irq_desc for 18 on node 0 [ 1.264169] alloc kstat_irqs on node 0 [ 1.264175] ohci_hcd 0000:00:13.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 1.264184] ohci_hcd 0000:00:13.0: OHCI Host Controller [ 1.264208] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 5 [ 1.264237] ohci_hcd 0000:00:13.0: irq 18, io mem 0xfe02b000 [ 1.324087] usb usb5: configuration #1 chosen from 1 choice [ 1.324103] hub 5-0:1.0: USB hub found [ 1.324110] hub 5-0:1.0: 3 ports detected [ 1.324185] ohci_hcd 0000:00:13.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 1.324193] ohci_hcd 0000:00:13.1: OHCI Host Controller [ 1.324213] ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 6 [ 1.324227] ohci_hcd 0000:00:13.1: irq 18, io mem 0xfe02a000 [ 1.384083] usb usb6: configuration #1 chosen from 1 choice [ 1.384099] hub 6-0:1.0: USB hub found [ 1.384106] hub 6-0:1.0: 3 ports detected [ 1.384176] ohci_hcd 0000:00:14.5: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 1.384185] ohci_hcd 0000:00:14.5: OHCI Host Controller [ 1.384204] ohci_hcd 0000:00:14.5: new USB bus registered, assigned bus number 7 [ 1.384220] ohci_hcd 0000:00:14.5: irq 18, io mem 0xfe028000 [ 1.444077] usb usb7: configuration #1 chosen from 1 choice [ 1.444094] hub 7-0:1.0: USB hub found [ 1.444101] hub 7-0:1.0: 2 ports detected [ 1.444146] uhci_hcd: USB Universal Host Controller Interface driver [ 1.444221] PNP: No PS/2 controller found. Probing ports directly. [ 1.477202] Failed to disable AUX port, but continuing anyway... Is this a SiS? [ 1.477204] If AUX port is really absent please use the 'i8042.noaux' option. [ 1.477339] ata4: SATA link down (SStatus 0 SControl 300) [ 1.481286] ata5: SATA link down (SStatus 0 SControl 300) [ 1.481313] ata3: SATA link down (SStatus 0 SControl 300) [ 1.481344] ata6: SATA link down (SStatus 0 SControl 300) [ 1.560024] usb 1-4: new high speed USB device using ehci_hcd and address 4 [ 1.650032] ata2: softreset failed (device not ready) [ 1.650035] ata2: applying SB600 PMP SRST workaround and retrying [ 1.711371] usb 1-4: configuration #1 chosen from 1 choice [ 1.720120] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.720175] mice: PS/2 mouse device common for all mice [ 1.720246] rtc_cmos 00:05: RTC can wake from S4 [ 1.720272] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0 [ 1.720304] rtc0: alarms up to one month, 242 bytes nvram, hpet irqs [ 1.720417] device-mapper: uevent: version 1.0.3 [ 1.720493] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com [ 1.720590] device-mapper: multipath: version 1.1.0 loaded [ 1.720592] device-mapper: multipath round-robin: version 1.0.0 loaded [ 1.720794] cpuidle: using governor ladder [ 1.720796] cpuidle: using governor menu [ 1.721150] TCP cubic registered [ 1.721259] NET: Registered protocol family 10 [ 1.721654] lo: Disabled Privacy Extensions [ 1.721913] NET: Registered protocol family 17 [ 1.721927] Bluetooth: L2CAP ver 2.13 [ 1.721929] Bluetooth: L2CAP socket layer initialized [ 1.721931] Bluetooth: SCO (Voice Link) ver 0.6 [ 1.721933] Bluetooth: SCO socket layer initialized [ 1.721961] Bluetooth: RFCOMM TTY layer initialized [ 1.721964] Bluetooth: RFCOMM socket layer initialized [ 1.721965] Bluetooth: RFCOMM ver 1.11 [ 1.721980] powernow-k8: Found 1 AMD Phenom(tm) 9750 Quad-Core Processor processors (4 cpu cores) (version 2.20.00) [ 1.722007] powernow-k8: 0 : pstate 0 (2400 MHz) [ 1.722008] powernow-k8: 1 : pstate 1 (1200 MHz) [ 1.722302] PM: Resume from disk failed. [ 1.722312] registered taskstats version 1 [ 1.722422] Magic number: 2:906:481 [ 1.722497] rtc_cmos 00:05: setting system clock to 2010-03-23 12:27:16 UTC (1269347236) [ 1.722499] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 1.722501] EDD information not available. [ 1.830026] usb 2-4: new high speed USB device using ehci_hcd and address 2 [ 1.830049] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1.830760] ata2.00: ATAPI: TSSTcorp CDDVDW SH-S223F, SB03, max UDMA/100, ATAPI AN [ 1.831703] ata2.00: configured for UDMA/100 [ 1.985261] usb 2-4: configuration #1 chosen from 1 choice [ 2.020025] ata1: softreset failed (device not ready) [ 2.020028] ata1: applying SB600 PMP SRST workaround and retrying [ 2.200040] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 2.206358] ata1.00: ATA-7: SAMSUNG HD322HJ, 1AC01113, max UDMA7 [ 2.206360] ata1.00: 625142448 sectors, multi 0: LBA48 NCQ (depth 31/32) [ 2.212765] ata1.00: configured for UDMA/133 [ 2.230100] scsi 0:0:0:0: Direct-Access ATA SAMSUNG HD322HJ 1AC0 PQ: 0 ANSI: 5 [ 2.230195] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 2.230229] sd 0:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB) [ 2.230261] sd 0:0:0:0: [sda] Write Protect is off [ 2.230263] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 2.230279] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.230367] sda: [ 2.230886] scsi 1:0:0:0: CD-ROM TSSTcorp CDDVDW SH-S223F SB03 PQ: 0 ANSI: 5 [ 2.234169] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray [ 2.234172] Uniform CD-ROM driver Revision: 3.20 [ 2.234241] sr 1:0:0:0: Attached scsi CD-ROM sr0 [ 2.234274] sr 1:0:0:0: Attached scsi generic sg1 type 5 [ 2.244792] sda1 sda2 sda3 sda4 < sda5 sda6 [ 2.282518] usb 3-1: new low speed USB device using ohci_hcd and address 2 [ 2.286089] sda7 > [ 2.286326] sd 0:0:0:0: [sda] Attached SCSI disk [ 2.390091] Freeing unused kernel memory: 664k freed [ 2.390265] Write protecting the kernel read-only data: 7596k [ 2.485504] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 2.485524] r8169 0000:02:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 2.485578] r8169 0000:02:00.0: setting latency timer to 64 [ 2.485612] alloc irq_desc for 27 on node 0 [ 2.485614] alloc kstat_irqs on node 0 [ 2.485625] r8169 0000:02:00.0: irq 27 for MSI/MSI-X [ 2.486120] eth0: RTL8168c/8111c at 0xffffc9000066a000, 00:1f:d0:d7:a2:5c, XID 3c4000c0 IRQ 27 [ 2.495030] usb 3-1: configuration #1 chosen from 1 choice [ 2.505973] usbcore: registered new interface driver hiddev [ 2.511229] Initializing USB Mass Storage driver... [ 2.512475] scsi8 : SCSI emulation for USB Mass Storage devices [ 2.512644] usb-storage: device found at 4 [ 2.512647] usb-storage: waiting for device to settle before scanning [ 2.512693] scsi9 : SCSI emulation for USB Mass Storage devices [ 2.512743] usb-storage: device found at 2 [ 2.512744] usb-storage: waiting for device to settle before scanning [ 2.512768] usbcore: registered new interface driver usb-storage [ 2.512771] USB Mass Storage support registered. [ 2.521064] input: Logitech HID compliant keyboard as /devices/pci0000:00/0000:00:12.0/usb3/3-1/3-1:1.0/input/input3 [ 2.521123] generic-usb 0003:046D:C30E.0001: input,hidraw0: USB HID v1.10 Keyboard [Logitech HID compliant keyboard] on usb-0000:00:12.0-1/input0 [ 2.544900] input: Logitech HID compliant keyboard as /devices/pci0000:00/0000:00:12.0/usb3/3-1/3-1:1.1/input/input4 [ 2.544956] generic-usb 0003:046D:C30E.0002: input,hidraw1: USB HID v1.10 Device [Logitech HID compliant keyboard] on usb-0000:00:12.0-1/input1 [ 2.544973] usbcore: registered new interface driver usbhid [ 2.544975] usbhid: v2.6:USB HID core driver [ 2.822535] usb 3-2: new low speed USB device using ohci_hcd and address 3 [ 3.015772] usb 3-2: configuration #1 chosen from 1 choice [ 3.024861] input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:12.0/usb3/3-2/3-2:1.0/input/input5 [ 3.024920] generic-usb 0003:046D:C050.0003: input,hidraw2: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:12.0-2/input0 [ 3.753175] xor: automatically using best checksumming function: generic_sse [ 3.793804] generic_sse: 9927.600 MB/sec [ 3.793806] xor: using function: generic_sse (9927.600 MB/sec) [ 3.795616] device-mapper: dm-raid45: initialized v0.2594b [ 3.915355] PM: Starting manual resume from disk [ 3.915359] PM: Resume from partition 8:7 [ 3.915361] PM: Checking hibernation image. [ 3.915491] PM: Resume from disk failed. [ 3.944555] EXT4-fs (sda2): barriers enabled [ 3.952014] kjournald2 starting: pid 429, dev sda2:8, commit interval 5 seconds [ 3.952094] EXT4-fs (sda2): delayed allocation enabled [ 3.952097] EXT4-fs: file extents enabled [ 3.952466] EXT4-fs: mballoc enabled [ 3.952479] EXT4-fs (sda2): mounted filesystem with ordered data mode [ 4.454619] type=1505 audit(1269347239.230:2): operation="profile_load" pid=462 name=/sbin/dhclient3 [ 4.454863] type=1505 audit(1269347239.230:3): operation="profile_load" pid=462 name=/usr/lib/NetworkManager/nm-dhcp-client.action [ 4.455005] type=1505 audit(1269347239.230:4): operation="profile_load" pid=462 name=/usr/lib/connman/scripts/dhclient-script [ 4.505243] type=1505 audit(1269347239.280:5): operation="profile_load" pid=464 name=/usr/bin/freshclam [ 4.516744] type=1505 audit(1269347239.290:6): operation="profile_load" pid=465 name=/usr/lib/cups/backend/cups-pdf [ 4.517035] type=1505 audit(1269347239.290:7): operation="profile_load" pid=465 name=/usr/sbin/cupsd [ 4.518672] type=1505 audit(1269347239.290:8): operation="profile_load" pid=466 name=/usr/sbin/mysqld-akonadi [ 4.534536] type=1505 audit(1269347239.310:9): operation="profile_load" pid=467 name=/usr/sbin/ntpd [ 4.548239] type=1505 audit(1269347239.320:10): operation="profile_load" pid=468 name=/usr/sbin/tcpdump [ 7.510160] usb-storage: device scan complete [ 7.510235] usb-storage: device scan complete [ 7.510621] scsi 8:0:0:0: Direct-Access HDS72251 6VLAT20 PQ: 0 ANSI: 0 [ 7.510950] sd 8:0:0:0: Attached scsi generic sg2 type 0 [ 7.510980] scsi 9:0:0:0: Direct-Access JetFlash Transcend 8GB 8.07 PQ: 0 ANSI: 2 [ 7.511243] sd 9:0:0:0: Attached scsi generic sg3 type 0 [ 7.512352] sd 8:0:0:0: [sdb] 321672960 512-byte logical blocks: (164 GB/153 GiB) [ 7.513197] sd 9:0:0:0: [sdc] 15687680 512-byte logical blocks: (8.03 GB/7.48 GiB) [ 7.513345] sd 8:0:0:0: [sdb] Write Protect is off [ 7.513348] sd 8:0:0:0: [sdb] Mode Sense: 33 00 00 00 [ 7.513350] sd 8:0:0:0: [sdb] Assuming drive cache: write through [ 7.513696] sd 9:0:0:0: [sdc] Write Protect is off [ 7.513698] sd 9:0:0:0: [sdc] Mode Sense: 03 00 00 00 [ 7.513700] sd 9:0:0:0: [sdc] Assuming drive cache: write through [ 7.514967] sd 8:0:0:0: [sdb] Assuming drive cache: write through [ 7.514969] sdb: [ 7.515688] sd 9:0:0:0: [sdc] Assuming drive cache: write through [ 7.515691] sdc: sdb1 [ 7.526811] sd 8:0:0:0: [sdb] Assuming drive cache: write through [ 7.526813] sd 8:0:0:0: [sdb] Attached SCSI disk [ 7.994118] sdc1 [ 7.995347] sd 9:0:0:0: [sdc] Assuming drive cache: write through [ 7.995350] sd 9:0:0:0: [sdc] Attached SCSI removable disk [ 18.286158] udev: starting version 147 [ 18.302735] parport_pc 00:08: reported by Plug and Play ACPI [ 18.302791] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE] [ 18.312261] EDAC MC: Ver: 2.1.0 Mar 12 2010 [ 18.313317] Adding 1052216k swap on /dev/sda7. Priority:-1 extents:1 across:1052216k [ 18.315875] lp: driver loaded but no devices found [ 18.319102] EDAC amd64_edac: Ver: 3.2.0 Mar 12 2010 [ 18.320443] EDAC amd64: This node reports that Memory ECC is currently disabled. [ 18.320447] EDAC amd64: bit 0x400000 in register F3x44 of the MISC_CONTROL device (0000:00:18.3) should be enabled [ 18.320450] EDAC amd64: WARNING: ECC is NOT currently enabled by the BIOS. Module will NOT be loaded. [ 18.320451] Either Enable ECC in the BIOS, or use the 'ecc_enable_override' parameter. [ 18.320452] Might be a BIOS bug, if BIOS says ECC is enabled [ 18.320453] Use of the override can cause unknown side effects. [ 18.323903] amd64_edac: probe of 0000:00:18.2 failed with error -22 [ 18.332060] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0 [ 18.380105] nvidia: module license 'NVIDIA' taints kernel. [ 18.380109] Disabling lock debugging due to kernel taint [ 18.384801] lp0: using parport0 (interrupt-driven). [ 18.516702] ppdev: user-space parallel port driver [ 18.519170] ip_tables: (C) 2000-2006 Netfilter Core Team [ 18.560887] EXT4-fs (sda2): internal journal on sda2:8 [ 18.587778] HDA Intel 0000:00:14.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 18.634574] nvidia 0000:01:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 18.634581] nvidia 0000:01:00.0: setting latency timer to 64 [ 18.634740] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 185.18.36 Fri Aug 14 17:35:21 PDT 2009 [ 18.726941] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:14.2/input/input6 [ 18.762594] cfg80211: Calling CRDA to update world regulatory domain [ 18.782241] alloc irq_desc for 20 on node 0 [ 18.782245] alloc kstat_irqs on node 0 [ 18.782255] rt61pci 0000:03:06.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 [ 18.796803] phy0: Selected rate control algorithm 'minstrel' [ 18.797371] Registered led device: rt61pci-phy0::radio [ 18.797384] Registered led device: rt61pci-phy0::assoc [ 18.821717] cfg80211: World regulatory domain updated: [ 18.821720] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 18.821723] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 18.821725] (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 18.821727] (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 18.821729] (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 18.821731] (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 19.987266] EXT4-fs (sda5): barriers enabled [ 20.013101] kjournald2 starting: pid 950, dev sda5:8, commit interval 5 seconds [ 20.013361] EXT4-fs (sda5): internal journal on sda5:8 [ 20.013364] EXT4-fs (sda5): delayed allocation enabled [ 20.013367] EXT4-fs: file extents enabled [ 20.013634] EXT4-fs: mballoc enabled [ 20.013648] EXT4-fs (sda5): mounted filesystem with ordered data mode [ 20.114195] type=1505 audit(1269343654.890:11): operation="profile_replace" pid=1096 name=/sbin/dhclient3 [ 20.114436] type=1505 audit(1269343654.890:12): operation="profile_replace" pid=1096 name=/usr/lib/NetworkManager/nm-dhcp-client.action [ 20.114572] type=1505 audit(1269343654.890:13): operation="profile_replace" pid=1096 name=/usr/lib/connman/scripts/dhclient-script [ 20.116854] type=1505 audit(1269343654.890:14): operation="profile_replace" pid=1098 name=/usr/bin/freshclam [ 20.118160] type=1505 audit(1269343654.890:15): operation="profile_replace" pid=1099 name=/usr/lib/cups/backend/cups-pdf [ 20.118456] type=1505 audit(1269343654.890:16): operation="profile_replace" pid=1099 name=/usr/sbin/cupsd [ 20.119875] type=1505 audit(1269343654.890:17): operation="profile_replace" pid=1100 name=/usr/sbin/mysqld-akonadi [ 20.121137] type=1505 audit(1269343654.890:18): operation="profile_replace" pid=1101 name=/usr/sbin/ntpd [ 20.122453] type=1505 audit(1269343654.890:19): operation="profile_replace" pid=1102 name=/usr/sbin/tcpdump [ 20.129045] r8169: eth0: link down [ 20.129474] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 20.130917] rt61pci 0000:03:06.0: firmware: requesting rt2561s.bin [ 20.294657] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 21.090597] usplash:381 freeing invalid memtype fffffffff9000000-fffffffff9e00000 [ 68.560080] wlan0: authenticate with AP 00:23:08:32:0d:b4 [ 68.561486] wlan0: authenticated [ 68.561494] wlan0: associate with AP 00:23:08:32:0d:b4 [ 68.564105] wlan0: RX AssocResp from 00:23:08:32:0d:b4 (capab=0x411 status=0 aid=1) [ 68.564114] wlan0: associated [ 68.565406] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 68.612633] cfg80211: Calling CRDA for country: DE [ 68.615459] cfg80211: Received country IE: [ 68.615464] cfg80211: Regulatory domain: DE [ 68.615467] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 68.615472] (2402000 KHz - 2494000 KHz @ 40000 KHz), (10000 mBi, 10000 mBm) [ 68.615475] cfg80211: CRDA thinks this should applied: [ 68.615478] cfg80211: Regulatory domain: DE [ 68.615480] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 68.615484] (2400000 KHz - 2483500 KHz @ 40000 KHz), (N/A, 2000 mBm) [ 68.615488] (5150000 KHz - 5350000 KHz @ 40000 KHz), (N/A, 2000 mBm) [ 68.615491] (5470000 KHz - 5725000 KHz @ 40000 KHz), (N/A, 2698 mBm) [ 68.615494] cfg80211: We intersect both of these and get: [ 68.615496] cfg80211: Regulatory domain: 98 [ 68.615498] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 68.615502] (2402000 KHz - 2483500 KHz @ 40000 KHz), (N/A, 2000 mBm) [ 68.615509] cfg80211: Disabling channel 2484 MHz on phy0 due to Country IE [ 68.615514] cfg80211: Current regulatory domain updated by AP to: DE [ 68.615517] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 68.615521] (2402000 KHz - 2483500 KHz @ 40000 KHz), (N/A, 2000 mBm) [ 78.574337] process `skype' is using obsolete setsockopt SO_BSDCOMPAT [ 79.452519] wlan0: no IPv6 routers present [ 145.647366] vboxdrv: Trying to deactivate the NMI watchdog permanently... [ 145.647372] vboxdrv: Successfully done. [ 145.647376] vboxdrv: Found 4 processor cores. [ 145.647472] VBoxDrv: dbg - g_abExecMemory=ffffffffa0c17420 [ 145.647556] vboxdrv: fAsync=0 offMin=0x7d8 offMax=0x2e40 [ 145.647627] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'. [ 145.647631] vboxdrv: Successfully loaded version 3.0.8_OSE (interface 0x000e0000). [ 145.656046] VBoxNetAdp: dbg - g_abExecMemory=ffffffffa0db4ac0 [ 145.663510] VBoxNetFlt: dbg - g_abExecMemory=ffffffffa0dcf1c0