[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.32-10-generic (buildd@yellow) (gcc version 4.4.3 20100105 (prerelease) (Ubuntu 4.4.2-8ubuntu2) ) #14-Ubuntu SMP Thu Jan 7 17:38:08 UTC 2010 (Ubuntu 2.6.32-10.14-generic) [ 0.000000] Command line: BOOT_IMAGE=//vmlinuz-2.6.32-10-generic root=UUID=d7a59367-c583-4b2d-9d2c-e6b493d00900 ro quiet splash [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Centaur CentaurHauls [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009e000 (usable) [ 0.000000] BIOS-e820: 000000000009e000 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000d0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 00000000aff50000 (usable) [ 0.000000] BIOS-e820: 00000000aff50000 - 00000000aff65000 (ACPI data) [ 0.000000] BIOS-e820: 00000000aff65000 - 00000000aff66000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000aff66000 - 00000000c0000000 (reserved) [ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved) [ 0.000000] DMI present. [ 0.000000] last_pfn = 0xaff50 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-CFFFF write-protect [ 0.000000] D0000-E3FFF uncachable [ 0.000000] E4000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 0000000000 mask FF80000000 write-back [ 0.000000] 1 base 0080000000 mask FFC0000000 write-back [ 0.000000] 2 disabled [ 0.000000] 3 disabled [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] e820 update range: 0000000000001000 - 0000000000006000 (usable) ==> (reserved) [ 0.000000] Scanning 1 areas for low memory corruption [ 0.000000] modified physical RAM map: [ 0.000000] modified: 0000000000000000 - 0000000000001000 (usable) [ 0.000000] modified: 0000000000001000 - 0000000000006000 (reserved) [ 0.000000] modified: 0000000000006000 - 000000000009e000 (usable) [ 0.000000] modified: 000000000009e000 - 00000000000a0000 (reserved) [ 0.000000] modified: 00000000000d0000 - 0000000000100000 (reserved) [ 0.000000] modified: 0000000000100000 - 00000000aff50000 (usable) [ 0.000000] modified: 00000000aff50000 - 00000000aff65000 (ACPI data) [ 0.000000] modified: 00000000aff65000 - 00000000aff66000 (ACPI NVS) [ 0.000000] modified: 00000000aff66000 - 00000000c0000000 (reserved) [ 0.000000] modified: 00000000e0000000 - 00000000f0000000 (reserved) [ 0.000000] modified: 00000000fec00000 - 00000000fec10000 (reserved) [ 0.000000] modified: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] modified: 00000000fff80000 - 0000000100000000 (reserved) [ 0.000000] initial memory mapped : 0 - 20000000 [ 0.000000] init_memory_mapping: 0000000000000000-00000000aff50000 [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] 0000000000 - 00afe00000 page 2M [ 0.000000] 00afe00000 - 00aff50000 page 4k [ 0.000000] kernel direct mapping tables up to aff50000 @ 8000-d000 [ 0.000000] RAMDISK: 376f3000 - 37fef02d [ 0.000000] ACPI: RSDP 00000000000f7ca0 00024 (v02 ACRSYS) [ 0.000000] ACPI: XSDT 00000000aff5e351 0005C (v01 ACRSYS ACRPRDCT 06040000 LTP 00000000) [ 0.000000] ACPI: SLIC 00000000aff64ace 00176 (v01 ACRSYS ACRPRDCT 06040000 LOHR 00000000) [ 0.000000] ACPI: FACP 00000000aff64c44 000F4 (v03 NVIDIA MCP67-M 06040000 PTL_ 000F4240) [ 0.000000] ACPI: DSDT 00000000aff5e3ad 066AD (v01 NVIDIA MCP67 06040000 MSFT 03000000) [ 0.000000] ACPI: FACS 00000000aff65fc0 00040 [ 0.000000] ACPI: SSDT 00000000aff64d38 001C4 (v01 PTLTD POWERNOW 06040000 LTP 00000001) [ 0.000000] ACPI: MCFG 00000000aff64efc 0003C (v01 Nvidia NVDAACPI 06040000 NVDA 00000000) [ 0.000000] ACPI: HPET 00000000aff64f38 00038 (v01 PTLTD HPETTBL 06040000 LTP 00000001) [ 0.000000] ACPI: APIC 00000000aff64f70 00068 (v01 PTLTD ? APIC 06040000 LTP 00000000) [ 0.000000] ACPI: BOOT 00000000aff64fd8 00028 (v01 PTLTD $SBFTBL$ 06040000 LTP 00000001) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] Scanning NUMA topology in Northbridge 24 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at 0000000000000000-00000000aff50000 [ 0.000000] Bootmem setup node 0 0000000000000000-00000000aff50000 [ 0.000000] NODE_DATA [000000000000b000 - 000000000000ffff] [ 0.000000] bootmap [0000000000010000 - 0000000000025fef] pages 16 [ 0.000000] (7 early reservations) ==> bootmem [0000000000 - 00aff50000] [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] [ 0.000000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000] [ 0.000000] #2 [0001000000 - 0001a8efc4] TEXT DATA BSS ==> [0001000000 - 0001a8efc4] [ 0.000000] #3 [00376f3000 - 0037fef02d] RAMDISK ==> [00376f3000 - 0037fef02d] [ 0.000000] #4 [000009e000 - 0000100000] BIOS reserved ==> [000009e000 - 0000100000] [ 0.000000] #5 [0001a8f000 - 0001a8f0ed] BRK ==> [0001a8f000 - 0001a8f0ed] [ 0.000000] #6 [0000008000 - 000000b000] PGTABLE ==> [0000008000 - 000000b000] [ 0.000000] found SMP MP-table at [ffff8800000f7c90] f7c90 [ 0.000000] [ffffea0000000000-ffffea00027fffff] PMD -> [ffff880002000000-ffff8800047fffff] on node 0 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000000 -> 0x00001000 [ 0.000000] DMA32 0x00001000 -> 0x00100000 [ 0.000000] Normal 0x00100000 -> 0x00100000 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[3] active PFN ranges [ 0.000000] 0: 0x00000000 -> 0x00000001 [ 0.000000] 0: 0x00000006 -> 0x0000009e [ 0.000000] 0: 0x00000100 -> 0x000aff50 [ 0.000000] On node 0 totalpages: 720617 [ 0.000000] DMA zone: 56 pages used for memmap [ 0.000000] DMA zone: 104 pages reserved [ 0.000000] DMA zone: 3833 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 9798 pages used for memmap [ 0.000000] DMA32 zone: 706826 pages, LIFO batch:31 [ 0.000000] Detected use of extended apic ids on hypertransport bus [ 0.000000] ACPI: PM-Timer IO Port: 0x1008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x10de8201 base: 0xfed00000 [ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs [ 0.000000] nr_irqs_gsi: 24 [ 0.000000] PM: Registered nosave memory: 0000000000001000 - 0000000000006000 [ 0.000000] PM: Registered nosave memory: 000000000009e000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000d0000 [ 0.000000] PM: Registered nosave memory: 00000000000d0000 - 0000000000100000 [ 0.000000] Allocating PCI resources starting at c0000000 (gap: c0000000:20000000) [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:2 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 30 pages/cpu @ffff880001c00000 s91288 r8192 d23400 u1048576 [ 0.000000] pcpu-alloc: s91288 r8192 d23400 u1048576 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 710659 [ 0.000000] Policy zone: DMA32 [ 0.000000] Kernel command line: BOOT_IMAGE=//vmlinuz-2.6.32-10-generic root=UUID=d7a59367-c583-4b2d-9d2c-e6b493d00900 ro quiet splash [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Initializing CPU#0 [ 0.000000] Checking aperture... [ 0.000000] No AGP bridge found [ 0.000000] Node 0: aperture @ ec7e000000 size 32 MB [ 0.000000] Aperture beyond 4GB. Ignoring. [ 0.000000] Memory: 2821020k/2882880k available (5626k kernel code, 412k absent, 61448k reserved, 3155k data, 884k init) [ 0.000000] SLUB: Genslabs=14, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] NR_IRQS:4352 nr_irqs:424 [ 0.000000] Extended CMOS year: 2000 [ 0.000000] spurious 8259A interrupt: IRQ7. [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] allocated 28835840 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] hpet clockevent registered [ 0.000000] HPET: 3 timers in total, 0 timers will be used for per-cpu timer [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 1800.408 MHz processor. [ 0.010006] Calibrating delay loop (skipped), value calculated using timer frequency.. 3600.81 BogoMIPS (lpj=18004080) [ 0.010041] Security Framework initialized [ 0.010070] AppArmor: AppArmor initialized [ 0.010534] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.014304] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.016100] Mount-cache hash table entries: 256 [ 0.016290] Initializing cgroup subsys ns [ 0.016295] Initializing cgroup subsys cpuacct [ 0.016300] Initializing cgroup subsys memory [ 0.016311] Initializing cgroup subsys devices [ 0.016314] Initializing cgroup subsys freezer [ 0.016317] Initializing cgroup subsys net_cls [ 0.016340] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 0.016343] CPU: L2 Cache: 256K (64 bytes/line) [ 0.016347] CPU 0/0x0 -> Node 0 [ 0.016349] tseg: 00aff80000 [ 0.016352] CPU: Physical Processor ID: 0 [ 0.016353] CPU: Processor Core ID: 0 [ 0.016357] mce: CPU supports 5 MCE banks [ 0.016372] using C1E aware idle routine [ 0.016374] Performance Events: AMD PMU driver. [ 0.016380] ... version: 0 [ 0.016382] ... bit width: 48 [ 0.016383] ... generic registers: 4 [ 0.016385] ... value mask: 0000ffffffffffff [ 0.016388] ... max period: 00007fffffffffff [ 0.016390] ... fixed-purpose events: 0 [ 0.016392] ... event mask: 000000000000000f [ 0.020031] ACPI: Core revision 20090903 [ 0.040010] ftrace: converting mcount calls to 0f 1f 44 00 00 [ 0.040022] ftrace: allocating 23888 entries in 94 pages [ 0.048618] Setting APIC routing to flat [ 0.050428] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.150466] CPU0: AMD Athlon(tm) 64 X2 Dual-Core Processor TK-55 stepping 01 [ 0.160000] Booting processor 1 APIC 0x1 ip 0x6000 [ 0.020000] Initializing CPU#1 [ 0.020000] Calibrating delay using timer specific routine.. 3600.49 BogoMIPS (lpj=18002461) [ 0.020000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 0.020000] CPU: L2 Cache: 256K (64 bytes/line) [ 0.020000] CPU 1/0x1 -> Node 0 [ 0.020000] CPU: Physical Processor ID: 0 [ 0.020000] CPU: Processor Core ID: 1 [ 0.310038] CPU1: AMD Athlon(tm) 64 X2 Dual-Core Processor TK-55 stepping 01 [ 0.310063] Brought up 2 CPUs [ 0.310066] Total of 2 processors activated (7201.30 BogoMIPS). [ 0.310060] System has AMD C1E enabled [ 0.310060] Switch to broadcast mode on CPU1 [ 0.310280] CPU0 attaching sched-domain: [ 0.310284] domain 0: span 0-1 level MC [ 0.310287] groups: 0 1 [ 0.310293] CPU1 attaching sched-domain: [ 0.310296] domain 0: span 0-1 level MC [ 0.310299] groups: 1 0 [ 0.310504] devtmpfs: initialized [ 0.310915] regulator: core version 0.5 [ 0.310951] Time: 3:53:37 Date: 01/22/10 [ 0.311015] NET: Registered protocol family 16 [ 0.311169] node 0 link 0: io port [1000, fffff] [ 0.311173] TOM: 00000000c0000000 aka 3072M [ 0.311177] node 0 link 0: mmio [a0000, bffff] [ 0.311181] node 0 link 0: mmio [c0000000, dfffffff] [ 0.311184] node 0 link 0: mmio [e0000000, efffffff] [ 0.311188] node 0 link 0: mmio [f0000000, fe0bffff] [ 0.311191] bus: [00,ff] on node 0 link 0 [ 0.311194] bus: 00 index 0 io port: [0, ffff] [ 0.311196] bus: 00 index 1 mmio: [a0000, bffff] [ 0.311199] bus: 00 index 2 mmio: [c0000000, fcffffffff] [ 0.311208] ACPI: bus type pci registered [ 0.311294] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255 [ 0.311297] PCI: MCFG area at e0000000 reserved in E820 [ 0.318466] PCI: Using MMCONFIG at e0000000 - efffffff [ 0.318470] PCI: Using configuration type 1 for base access [ 0.319542] Trying to unpack rootfs image as initramfs... [ 0.330499] bio: create slab at 0 [ 0.350843] ACPI: EC: Look up EC in DSDT [ 0.355865] ACPI: Interpreter enabled [ 0.355870] ACPI: (supports S0 S3 S4 S5) [ 0.355895] ACPI: Using IOAPIC for interrupt routing [ 0.380143] ACPI: EC: GPE storm detected, transactions will use polling mode [ 0.423849] ACPI: EC: GPE = 0x10, I/O: command/status = 0x66, data = 0x62 [ 0.424198] ACPI: No dock devices found. [ 0.424530] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 0.424733] pci 0000:00:01.0: reg 10 io port: [0x1d00-0x1dff] [ 0.424776] pci 0000:00:01.1: reg 10 io port: [0x3080-0x30bf] [ 0.424787] pci 0000:00:01.1: reg 20 io port: [0x3040-0x307f] [ 0.424792] pci 0000:00:01.1: reg 24 io port: [0x3000-0x303f] [ 0.424813] pci 0000:00:01.1: PME# supported from D3hot D3cold [ 0.424818] pci 0000:00:01.1: PME# disabled [ 0.424879] pci 0000:00:01.3: reg 10 32bit mmio: [0xd0600000-0xd067ffff] [ 0.424963] pci 0000:00:02.0: reg 10 32bit mmio: [0xd0886000-0xd0886fff] [ 0.424987] pci 0000:00:02.0: supports D1 D2 [ 0.424989] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.424993] pci 0000:00:02.0: PME# disabled [ 0.425018] pci 0000:00:02.1: reg 10 32bit mmio: [0xd0889000-0xd08890ff] [ 0.425047] pci 0000:00:02.1: supports D1 D2 [ 0.425049] pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold [ 0.425053] pci 0000:00:02.1: PME# disabled [ 0.425083] pci 0000:00:04.0: reg 10 32bit mmio: [0xd0887000-0xd0887fff] [ 0.425107] pci 0000:00:04.0: supports D1 D2 [ 0.425109] pci 0000:00:04.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.425113] pci 0000:00:04.0: PME# disabled [ 0.425142] pci 0000:00:04.1: reg 10 32bit mmio: [0xd0889400-0xd08894ff] [ 0.425171] pci 0000:00:04.1: supports D1 D2 [ 0.425173] pci 0000:00:04.1: PME# supported from D0 D1 D2 D3hot D3cold [ 0.425177] pci 0000:00:04.1: PME# disabled [ 0.425218] pci 0000:00:06.0: reg 20 io port: [0x30c0-0x30cf] [ 0.425259] pci 0000:00:07.0: reg 10 32bit mmio: [0xd0880000-0xd0883fff] [ 0.425288] pci 0000:00:07.0: PME# supported from D3hot D3cold [ 0.425292] pci 0000:00:07.0: PME# disabled [ 0.425362] pci 0000:00:09.0: reg 10 io port: [0x30f0-0x30f7] [ 0.425367] pci 0000:00:09.0: reg 14 io port: [0x30e4-0x30e7] [ 0.425371] pci 0000:00:09.0: reg 18 io port: [0x30e8-0x30ef] [ 0.425376] pci 0000:00:09.0: reg 1c io port: [0x30e0-0x30e3] [ 0.425380] pci 0000:00:09.0: reg 20 io port: [0x30d0-0x30df] [ 0.425385] pci 0000:00:09.0: reg 24 32bit mmio: [0xd0884000-0xd0885fff] [ 0.425436] pci 0000:00:0a.0: reg 10 32bit mmio: [0xd0888000-0xd0888fff] [ 0.425440] pci 0000:00:0a.0: reg 14 io port: [0x30f8-0x30ff] [ 0.425445] pci 0000:00:0a.0: reg 18 32bit mmio: [0xd0889c00-0xd0889cff] [ 0.425450] pci 0000:00:0a.0: reg 1c 32bit mmio: [0xd0889800-0xd088980f] [ 0.425472] pci 0000:00:0a.0: supports D1 D2 [ 0.425474] pci 0000:00:0a.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.425479] pci 0000:00:0a.0: PME# disabled [ 0.425523] pci 0000:00:0c.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.425526] pci 0000:00:0c.0: PME# disabled [ 0.425569] pci 0000:00:0d.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.425573] pci 0000:00:0d.0: PME# disabled [ 0.425601] pci 0000:00:12.0: reg 10 32bit mmio: [0xd2000000-0xd2ffffff] [ 0.425608] pci 0000:00:12.0: reg 14 64bit mmio pref: [0xc0000000-0xcfffffff] [ 0.425613] pci 0000:00:12.0: reg 1c 64bit mmio: [0xd1000000-0xd1ffffff] [ 0.425619] pci 0000:00:12.0: reg 30 32bit mmio pref: [0x000000-0x01ffff] [ 0.425751] pci 0000:01:04.0: reg 10 32bit mmio: [0xd0500000-0xd05007ff] [ 0.425785] pci 0000:01:04.0: PME# supported from D0 D3hot D3cold [ 0.425789] pci 0000:01:04.0: PME# disabled [ 0.425817] pci 0000:01:04.1: reg 10 32bit mmio: [0xd0500800-0xd05008ff] [ 0.425850] pci 0000:01:04.1: supports D1 D2 [ 0.425853] pci 0000:01:04.1: PME# supported from D0 D1 D2 D3hot D3cold [ 0.425857] pci 0000:01:04.1: PME# disabled [ 0.425885] pci 0000:01:04.2: reg 10 32bit mmio: [0xd0500c00-0xd0500cff] [ 0.425919] pci 0000:01:04.2: supports D1 D2 [ 0.425922] pci 0000:01:04.2: PME# supported from D0 D1 D2 D3hot D3cold [ 0.425926] pci 0000:01:04.2: PME# disabled [ 0.425955] pci 0000:01:04.3: reg 10 32bit mmio: [0xd0501000-0xd05010ff] [ 0.425989] pci 0000:01:04.3: supports D1 D2 [ 0.425991] pci 0000:01:04.3: PME# supported from D0 D1 D2 D3hot D3cold [ 0.425995] pci 0000:01:04.3: PME# disabled [ 0.426022] pci 0000:01:04.4: reg 10 32bit mmio: [0xd0501400-0xd05014ff] [ 0.426056] pci 0000:01:04.4: supports D1 D2 [ 0.426058] pci 0000:01:04.4: PME# supported from D0 D1 D2 D3hot D3cold [ 0.426062] pci 0000:01:04.4: PME# disabled [ 0.426098] pci 0000:00:08.0: transparent bridge [ 0.426103] pci 0000:00:08.0: bridge 32bit mmio: [0xd0500000-0xd05fffff] [ 0.426144] pci 0000:00:0c.0: bridge io port: [0x4000-0x4fff] [ 0.426148] pci 0000:00:0c.0: bridge 32bit mmio: [0xd0200000-0xd03fffff] [ 0.426152] pci 0000:00:0c.0: bridge 64bit mmio pref: [0xd0000000-0xd01fffff] [ 0.426190] pci 0000:05:00.0: reg 10 64bit mmio: [0xd0400000-0xd040ffff] [ 0.426282] pci 0000:00:0d.0: bridge 32bit mmio: [0xd0400000-0xd04fffff] [ 0.426296] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.426416] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P0._PRT] [ 0.426442] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.XVR1._PRT] [ 0.426479] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.XVR2._PRT] [ 0.461722] ACPI: PCI Interrupt Link [LNK1] (IRQs 5 7 11) *10 [ 0.461964] ACPI: PCI Interrupt Link [LNK2] (IRQs 5 7 *11) [ 0.462199] ACPI: PCI Interrupt Link [LNK3] (IRQs 5 7 11) *0, disabled. [ 0.462435] ACPI: PCI Interrupt Link [LNK4] (IRQs 5 7 11) *0, disabled. [ 0.462673] ACPI: PCI Interrupt Link [LK1E] (IRQs 16) *0, disabled. [ 0.462908] ACPI: PCI Interrupt Link [LK2E] (IRQs 17) *0, disabled. [ 0.463145] ACPI: PCI Interrupt Link [LK3E] (IRQs 18) *0, disabled. [ 0.463380] ACPI: PCI Interrupt Link [LK4E] (IRQs 19) *10 [ 0.463614] ACPI: PCI Interrupt Link [LSMB] (IRQs 20 21 22 23) *10 [ 0.463857] ACPI: PCI Interrupt Link [LUS0] (IRQs 20 21 22 23) *11 [ 0.464095] ACPI: PCI Interrupt Link [LUS2] (IRQs 20 21 22 23) *7 [ 0.464342] ACPI: PCI Interrupt Link [LMAC] (IRQs 20 21 22 23) *11 [ 0.464579] ACPI: PCI Interrupt Link [LAZA] (IRQs 20 21 22 23) *10 [ 0.464815] ACPI: PCI Interrupt Link [LGPU] (IRQs 17) *10 [ 0.465051] ACPI: PCI Interrupt Link [LPID] (IRQs 20 21 22 23) *0, disabled. [ 0.465290] ACPI: PCI Interrupt Link [LSI0] (IRQs 20 21 22 23) *5 [ 0.465536] ACPI: PCI Interrupt Link [Z00N] (IRQs 20 21 22 23) *10 [ 0.465779] ACPI: PCI Interrupt Link [Z00O] (IRQs 20 21 22 23) *11 [ 0.466015] ACPI: PCI Interrupt Link [LPMU] (IRQs 18) *11 [ 0.466196] vgaarb: device added: PCI:0000:00:12.0,decodes=io+mem,owns=io+mem,locks=none [ 0.466207] vgaarb: loaded [ 0.466357] SCSI subsystem initialized [ 0.480378] Switch to broadcast mode on CPU0 [ 0.480378] libata version 3.00 loaded. [ 0.480378] usbcore: registered new interface driver usbfs [ 0.480378] usbcore: registered new interface driver hub [ 0.480378] usbcore: registered new device driver usb [ 0.480538] ACPI: WMI: Mapper loaded [ 0.480541] PCI: Using ACPI for IRQ routing [ 0.480763] Bluetooth: Core ver 2.15 [ 0.480831] NET: Registered protocol family 31 [ 0.480833] Bluetooth: HCI device and connection manager initialized [ 0.480838] Bluetooth: HCI socket layer initialized [ 0.480840] NetLabel: Initializing [ 0.480842] NetLabel: domain hash size = 128 [ 0.480844] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.480862] NetLabel: unlabeled traffic allowed by default [ 0.480925] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 31 [ 0.480931] hpet0: 3 comparators, 32-bit 25.000000 MHz counter [ 0.500005] Switching to clocksource hpet [ 0.502209] AppArmor: AppArmor Filesystem Enabled [ 0.502235] pnp: PnP ACPI init [ 0.502259] ACPI: bus type pnp registered [ 0.595259] Freeing initrd memory: 9200k freed [ 0.612493] pnp: PnP ACPI: found 13 devices [ 0.612497] ACPI: ACPI bus type pnp unregistered [ 0.612517] system 00:01: ioport range 0x360-0x361 has been reserved [ 0.612520] system 00:01: ioport range 0x4d0-0x4d1 has been reserved [ 0.612531] system 00:07: iomem range 0xe0000000-0xefffffff has been reserved [ 0.612539] system 00:0a: ioport range 0x1000-0x107f has been reserved [ 0.612543] system 00:0a: ioport range 0x1080-0x10ff has been reserved [ 0.612547] system 00:0a: ioport range 0x1400-0x147f has been reserved [ 0.612551] system 00:0a: ioport range 0x1480-0x14ff has been reserved [ 0.612554] system 00:0a: ioport range 0x1800-0x187f has been reserved [ 0.612558] system 00:0a: ioport range 0x1880-0x18ff has been reserved [ 0.612569] system 00:0c: iomem range 0xffc00000-0xffffffff could not be reserved [ 0.612573] system 00:0c: iomem range 0xfec00000-0xfec00fff could not be reserved [ 0.612577] system 00:0c: iomem range 0xfee00000-0xfeefffff could not be reserved [ 0.612581] system 00:0c: iomem range 0xfed00000-0xfed00fff has been reserved [ 0.612585] system 00:0c: iomem range 0xfef00000-0xfef00fff has been reserved [ 0.617386] pci 0000:00:08.0: PCI bridge, secondary bus 0000:01 [ 0.617389] pci 0000:00:08.0: IO window: disabled [ 0.617394] pci 0000:00:08.0: MEM window: 0xd0500000-0xd05fffff [ 0.617398] pci 0000:00:08.0: PREFETCH window: disabled [ 0.617402] pci 0000:00:0c.0: PCI bridge, secondary bus 0000:03 [ 0.617406] pci 0000:00:0c.0: IO window: 0x4000-0x4fff [ 0.617410] pci 0000:00:0c.0: MEM window: 0xd0200000-0xd03fffff [ 0.617414] pci 0000:00:0c.0: PREFETCH window: 0x000000d0000000-0x000000d01fffff [ 0.617419] pci 0000:00:0d.0: PCI bridge, secondary bus 0000:05 [ 0.617422] pci 0000:00:0d.0: IO window: disabled [ 0.617425] pci 0000:00:0d.0: MEM window: 0xd0400000-0xd04fffff [ 0.617428] pci 0000:00:0d.0: PREFETCH window: disabled [ 0.617440] pci 0000:00:08.0: setting latency timer to 64 [ 0.617447] pci 0000:00:0c.0: setting latency timer to 64 [ 0.617453] pci 0000:00:0d.0: setting latency timer to 64 [ 0.617458] pci_bus 0000:00: resource 0 io: [0x00-0xffff] [ 0.617461] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff] [ 0.617465] pci_bus 0000:01: resource 1 mem: [0xd0500000-0xd05fffff] [ 0.617468] pci_bus 0000:01: resource 3 io: [0x00-0xffff] [ 0.617471] pci_bus 0000:01: resource 4 mem: [0x000000-0xffffffffffffffff] [ 0.617474] pci_bus 0000:03: resource 0 io: [0x4000-0x4fff] [ 0.617477] pci_bus 0000:03: resource 1 mem: [0xd0200000-0xd03fffff] [ 0.617480] pci_bus 0000:03: resource 2 pref mem [0xd0000000-0xd01fffff] [ 0.617483] pci_bus 0000:05: resource 1 mem: [0xd0400000-0xd04fffff] [ 0.617535] NET: Registered protocol family 2 [ 0.617752] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.619823] TCP established hash table entries: 524288 (order: 11, 8388608 bytes) [ 0.626407] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.627221] TCP: Hash tables configured (established 524288 bind 65536) [ 0.627225] TCP reno registered [ 0.627371] NET: Registered protocol family 1 [ 0.627548] pci 0000:00:00.0: Found enabled HT MSI Mapping [ 0.627604] pci 0000:00:00.0: Found enabled HT MSI Mapping [ 0.627665] pci 0000:00:00.0: Found enabled HT MSI Mapping [ 0.627734] pci 0000:00:00.0: Found enabled HT MSI Mapping [ 0.627806] pci 0000:00:00.0: Found enabled HT MSI Mapping [ 0.627883] pci 0000:00:00.0: Found enabled HT MSI Mapping [ 0.627891] pci 0000:00:12.0: Boot video device [ 0.628140] Simple Boot Flag at 0x36 set to 0x1 [ 0.628391] Scanning for low memory corruption every 60 seconds [ 0.628585] audit: initializing netlink socket (disabled) [ 0.628600] type=2000 audit(1264132416.622:1): initialized [ 0.639601] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.641428] VFS: Disk quotas dquot_6.5.2 [ 0.641510] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.642349] fuse init (API version 7.13) [ 0.642461] msgmni has been set to 5527 [ 0.642788] alg: No test for stdrng (krng) [ 0.642802] io scheduler noop registered [ 0.642805] io scheduler anticipatory registered [ 0.642807] io scheduler deadline registered [ 0.642879] io scheduler cfq registered (default) [ 0.643091] alloc irq_desc for 24 on node 0 [ 0.643093] alloc kstat_irqs on node 0 [ 0.643104] pcieport 0000:00:0c.0: irq 24 for MSI/MSI-X [ 0.643110] pcieport 0000:00:0c.0: setting latency timer to 64 [ 0.643237] alloc irq_desc for 25 on node 0 [ 0.643239] alloc kstat_irqs on node 0 [ 0.643245] pcieport 0000:00:0d.0: irq 25 for MSI/MSI-X [ 0.643250] pcieport 0000:00:0d.0: setting latency timer to 64 [ 0.643324] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.643352] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 0.720105] ACPI: AC Adapter [ACAD] (on-line) [ 0.720196] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0 [ 0.790069] ACPI: Lid Switch [LID] [ 0.790123] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1 [ 0.790126] ACPI: Sleep Button [SLPB] [ 0.790205] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2 [ 0.790209] ACPI: Power Button [PWRB] [ 0.790258] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3 [ 0.790261] ACPI: Power Button [PWRF] [ 0.790638] ACPI: processor limited to max C-state 1 [ 0.790673] processor LNXCPU:00: registered as cooling_device0 [ 0.790717] processor LNXCPU:01: registered as cooling_device1 [ 1.130170] ACPI: Invalid active0 threshold [ 1.240083] thermal LNXTHERM:01: registered as thermal_zone0 [ 1.240093] ACPI: Thermal Zone [THRM] (43 C) [ 1.240213] ACPI: Battery Slot [BAT1] (battery present) [ 1.242085] Linux agpgart interface v0.103 [ 1.242135] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.243571] brd: module loaded [ 1.244126] loop: module loaded [ 1.244259] input: Macintosh mouse button emulation as /devices/virtual/input/input4 [ 1.244491] ahci 0000:00:09.0: version 3.0 [ 1.244929] ACPI: PCI Interrupt Link [LSI0] enabled at IRQ 23 [ 1.244935] alloc irq_desc for 23 on node 0 [ 1.244938] alloc kstat_irqs on node 0 [ 1.244950] ahci 0000:00:09.0: PCI INT A -> Link[LSI0] -> GSI 23 (level, low) -> IRQ 23 [ 1.244991] alloc irq_desc for 26 on node 0 [ 1.244993] alloc kstat_irqs on node 0 [ 1.245002] ahci 0000:00:09.0: irq 26 for MSI/MSI-X [ 1.245008] ahci 0000:00:09.0: controller can do NCQ, turning on CAP_NCQ [ 1.245068] ahci 0000:00:09.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl IDE mode [ 1.245073] ahci 0000:00:09.0: flags: 64bit ncq sntf led clo pmp pio slum part [ 1.245077] ahci 0000:00:09.0: setting latency timer to 64 [ 1.245605] scsi0 : ahci [ 1.245768] scsi1 : ahci [ 1.245836] scsi2 : ahci [ 1.245906] scsi3 : ahci [ 1.246058] ata1: SATA max UDMA/133 abar m8192@0xd0884000 port 0xd0884100 irq 26 [ 1.246062] ata2: SATA max UDMA/133 abar m8192@0xd0884000 port 0xd0884180 irq 26 [ 1.246065] ata3: SATA max UDMA/133 abar m8192@0xd0884000 port 0xd0884200 irq 26 [ 1.246068] ata4: SATA max UDMA/133 abar m8192@0xd0884000 port 0xd0884280 irq 26 [ 1.246471] pata_amd 0000:00:06.0: version 0.4.1 [ 1.246526] pata_amd 0000:00:06.0: setting latency timer to 64 [ 1.246617] scsi4 : pata_amd [ 1.246705] scsi5 : pata_amd [ 1.247217] ata5: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x30c0 irq 14 [ 1.247220] ata6: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0x30c8 irq 15 [ 1.248068] Fixed MDIO Bus: probed [ 1.248109] PPP generic driver version 2.4.2 [ 1.248180] tun: Universal TUN/TAP device driver, 1.6 [ 1.248182] tun: (C) 1999-2004 Max Krasnyansky [ 1.248297] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.248750] ACPI: PCI Interrupt Link [LUS2] enabled at IRQ 22 [ 1.248757] alloc irq_desc for 22 on node 0 [ 1.248759] alloc kstat_irqs on node 0 [ 1.248772] ehci_hcd 0000:00:02.1: PCI INT B -> Link[LUS2] -> GSI 22 (level, low) -> IRQ 22 [ 1.248795] ehci_hcd 0000:00:02.1: setting latency timer to 64 [ 1.248799] ehci_hcd 0000:00:02.1: EHCI Host Controller [ 1.248899] ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 1 [ 1.248932] ehci_hcd 0000:00:02.1: debug port 1 [ 1.248940] ehci_hcd 0000:00:02.1: cache line size of 64 is not supported [ 1.248967] ehci_hcd 0000:00:02.1: irq 22, io mem 0xd0889000 [ 1.260051] ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00 [ 1.260170] usb usb1: configuration #1 chosen from 1 choice [ 1.260210] hub 1-0:1.0: USB hub found [ 1.260220] hub 1-0:1.0: 5 ports detected [ 1.260768] ACPI: PCI Interrupt Link [Z00O] enabled at IRQ 21 [ 1.260775] alloc irq_desc for 21 on node 0 [ 1.260778] alloc kstat_irqs on node 0 [ 1.260790] ehci_hcd 0000:00:04.1: PCI INT B -> Link[Z00O] -> GSI 21 (level, low) -> IRQ 21 [ 1.260813] ehci_hcd 0000:00:04.1: setting latency timer to 64 [ 1.260816] ehci_hcd 0000:00:04.1: EHCI Host Controller [ 1.260898] ehci_hcd 0000:00:04.1: new USB bus registered, assigned bus number 2 [ 1.260928] ehci_hcd 0000:00:04.1: debug port 1 [ 1.260937] ehci_hcd 0000:00:04.1: cache line size of 64 is not supported [ 1.260964] ehci_hcd 0000:00:04.1: irq 21, io mem 0xd0889400 [ 1.280033] ehci_hcd 0000:00:04.1: USB 2.0 started, EHCI 1.00 [ 1.280137] usb usb2: configuration #1 chosen from 1 choice [ 1.280182] hub 2-0:1.0: USB hub found [ 1.280192] hub 2-0:1.0: 5 ports detected [ 1.280271] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.280787] ACPI: PCI Interrupt Link [LUS0] enabled at IRQ 20 [ 1.280794] alloc irq_desc for 20 on node 0 [ 1.280796] alloc kstat_irqs on node 0 [ 1.280808] ohci_hcd 0000:00:02.0: PCI INT A -> Link[LUS0] -> GSI 20 (level, low) -> IRQ 20 [ 1.280832] ohci_hcd 0000:00:02.0: setting latency timer to 64 [ 1.280836] ohci_hcd 0000:00:02.0: OHCI Host Controller [ 1.280917] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 3 [ 1.280956] ohci_hcd 0000:00:02.0: irq 20, io mem 0xd0886000 [ 1.342146] usb usb3: configuration #1 chosen from 1 choice [ 1.342180] hub 3-0:1.0: USB hub found [ 1.342192] hub 3-0:1.0: 5 ports detected [ 1.342727] ACPI: PCI Interrupt Link [Z00N] enabled at IRQ 23 [ 1.342733] ohci_hcd 0000:00:04.0: PCI INT A -> Link[Z00N] -> GSI 23 (level, low) -> IRQ 23 [ 1.342757] ohci_hcd 0000:00:04.0: setting latency timer to 64 [ 1.342761] ohci_hcd 0000:00:04.0: OHCI Host Controller [ 1.342836] ohci_hcd 0000:00:04.0: new USB bus registered, assigned bus number 4 [ 1.342881] ohci_hcd 0000:00:04.0: irq 23, io mem 0xd0887000 [ 1.402320] usb usb4: configuration #1 chosen from 1 choice [ 1.402356] hub 4-0:1.0: USB hub found [ 1.402368] hub 4-0:1.0: 5 ports detected [ 1.402445] uhci_hcd: USB Universal Host Controller Interface driver [ 1.402568] PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSE0] at 0x60,0x64 irq 1,12 [ 1.422250] ata5.00: ATAPI: PIONEER DVD-RW DVRKD08RS, 1.02, max UDMA/33 [ 1.422280] ata5: nv_mode_filter: 0x739f&0x739f->0x739f, BIOS=0x7000 (0xc000c700) ACPI=0x701f (60:600:0x13) [ 1.432086] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.432103] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 1.432219] mice: PS/2 mouse device common for all mice [ 1.432372] Driver 'rtc_cmos' needs updating - please use bus_type methods [ 1.432405] rtc_cmos 00:04: RTC can wake from S4 [ 1.432456] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0 [ 1.432521] rtc0: alarms up to one year, y3k, 114 bytes nvram, hpet irqs [ 1.432696] device-mapper: uevent: version 1.0.3 [ 1.433338] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com [ 1.433458] device-mapper: multipath: version 1.1.0 loaded [ 1.433462] device-mapper: multipath round-robin: version 1.0.0 loaded [ 1.433716] cpuidle: using governor ladder [ 1.433719] cpuidle: using governor menu [ 1.434215] TCP cubic registered [ 1.434386] NET: Registered protocol family 10 [ 1.434994] lo: Disabled Privacy Extensions [ 1.435356] NET: Registered protocol family 17 [ 1.435385] Bluetooth: L2CAP ver 2.14 [ 1.435387] Bluetooth: L2CAP socket layer initialized [ 1.435390] Bluetooth: SCO (Voice Link) ver 0.6 [ 1.435393] Bluetooth: SCO socket layer initialized [ 1.435458] Bluetooth: RFCOMM TTY layer initialized [ 1.435467] Bluetooth: RFCOMM socket layer initialized [ 1.435469] Bluetooth: RFCOMM ver 1.11 [ 1.435494] powernow-k8: Found 1 AMD Athlon(tm) 64 X2 Dual-Core Processor TK-55 processors (2 cpu cores) (version 2.20.00) [ 1.435552] powernow-k8: 0 : fid 0xa (1800 MHz), vid 0x13 [ 1.435554] powernow-k8: 1 : fid 0x8 (1600 MHz), vid 0x14 [ 1.435557] powernow-k8: 2 : fid 0x0 (800 MHz), vid 0x1a [ 1.435778] PM: Resume from disk failed. [ 1.435802] registered taskstats version 1 [ 1.436207] Magic number: 10:276:867 [ 1.436325] rtc_cmos 00:04: setting system clock to 2010-01-22 03:53:38 UTC (1264132418) [ 1.436329] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 1.436331] EDD information not available. [ 1.454685] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input5 [ 1.460295] ata5.00: configured for UDMA/33 [ 1.580032] usb 1-1: new high speed USB device using ehci_hcd and address 2 [ 1.590042] ata3: SATA link down (SStatus 0 SControl 300) [ 1.590064] ata4: SATA link down (SStatus 0 SControl 300) [ 1.590089] ata2: SATA link down (SStatus 0 SControl 300) [ 1.743734] usb 1-1: configuration #1 chosen from 1 choice [ 1.770036] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1.771172] ata1.00: ATA-8: Hitachi HTS542512K9SA00, BB2OC31P, max UDMA/133 [ 1.771175] ata1.00: 234441648 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 1.772535] ata1.00: configured for UDMA/133 [ 1.772675] scsi 0:0:0:0: Direct-Access ATA Hitachi HTS54251 BB2O PQ: 0 ANSI: 5 [ 1.772897] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 1.772994] sd 0:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/111 GiB) [ 1.773052] sd 0:0:0:0: [sda] Write Protect is off [ 1.773055] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.773084] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.773264] sda: [ 1.779578] scsi 4:0:0:0: CD-ROM PIONEER DVD-RW DVRKD08RS 1.02 PQ: 0 ANSI: 5 [ 1.785641] sr0: scsi3-mmc drive: 62x/62x writer dvd-ram cd/rw xa/form2 cdda tray [ 1.785645] Uniform CD-ROM driver Revision: 3.20 [ 1.785765] sr 4:0:0:0: Attached scsi CD-ROM sr0 [ 1.785835] sr 4:0:0:0: Attached scsi generic sg1 type 5 [ 1.785898] ata6: port disabled. ignoring. [ 1.793578] sda1 sda2 sda3 sda4 < sda5 sda6 sda7 sda8 [ 1.860038] usb 1-2: new high speed USB device using ehci_hcd and address 3 [ 1.864520] sda9 sda10 sda11 sda12 sda13 sda14 sda15 > [ 1.934555] sd 0:0:0:0: [sda] Attached SCSI disk [ 1.934593] Freeing unused kernel memory: 884k freed [ 1.935219] Write protecting the kernel read-only data: 8012k [ 1.959553] udev: starting version 149 [ 2.015081] usb 1-2: configuration #1 chosen from 1 choice [ 2.074060] vga16fb: initializing [ 2.074066] vga16fb: mapped to 0xffff8800000a0000 [ 2.074141] fb0: VGA16 VGA frame buffer device [ 2.088671] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.64. [ 2.089180] ACPI: PCI Interrupt Link [LMAC] enabled at IRQ 22 [ 2.089188] forcedeth 0000:00:0a.0: PCI INT A -> Link[LMAC] -> GSI 22 (level, low) -> IRQ 22 [ 2.089194] forcedeth 0000:00:0a.0: setting latency timer to 64 [ 2.124191] [Firmware Bug]: ACPI(IGPU) defines _DOD but not _DOS [ 2.124472] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input6 [ 2.124536] ACPI: Video Device [IGPU] (multi-head: yes rom: no post: no) [ 2.124806] Initializing USB Mass Storage driver... [ 2.296457] ACPI: PCI Interrupt Link [LNK1] enabled at IRQ 11 [ 2.296483] ohci1394 0000:01:04.0: PCI INT A -> Link[LNK1] -> GSI 11 (level, low) -> IRQ 11 [ 2.296703] scsi6 : SCSI emulation for USB Mass Storage devices [ 2.296881] usb-storage: device found at 2 [ 2.296883] usb-storage: waiting for device to settle before scanning [ 2.296917] scsi7 : SCSI emulation for USB Mass Storage devices [ 2.297013] usbcore: registered new interface driver usb-storage [ 2.297016] USB Mass Storage support registered. [ 2.297275] usb-storage: device found at 3 [ 2.297277] usb-storage: waiting for device to settle before scanning [ 2.350098] ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[11] MMIO=[d0500000-d05007ff] Max Packet=[2048] IR/IT contexts=[4/4] [ 2.355377] Console: switching to colour frame buffer device 80x30 [ 2.621351] forcedeth 0000:00:0a.0: ifname eth0, PHY OUI 0x732 @ 1, addr 00:1b:38:cb:e2:35 [ 2.621357] forcedeth 0000:00:0a.0: highdma pwrctl mgmt gbit lnktim msi desc-v3 [ 3.354252] EXT4-fs (sda2): INFO: recovery required on readonly filesystem [ 3.354259] EXT4-fs (sda2): write access will be enabled during recovery [ 3.670196] ieee1394: Host added: ID:BUS[0-00:1023] GUID[00023f81ba400b55] [ 5.551175] EXT4-fs (sda2): orphan cleanup on readonly fs [ 5.551188] EXT4-fs (sda2): ext4_orphan_cleanup: deleting unreferenced inode 135472 [ 5.551297] EXT4-fs (sda2): 1 orphan inode deleted [ 5.551301] EXT4-fs (sda2): recovery complete [ 5.728648] EXT4-fs (sda2): mounted filesystem with ordered data mode [ 7.138681] Adding 3903752k swap on /dev/sda5. Priority:-1 extents:1 across:3903752k [ 7.291183] usb-storage: device scan complete [ 7.291649] usb-storage: device scan complete [ 7.293288] scsi 7:0:0:0: Direct-Access Kingston DataTraveler 2.0 PMAP PQ: 0 ANSI: 0 CCS [ 7.293301] scsi 6:0:0:0: Direct-Access Seagate FreeAgentDesktop 100F PQ: 0 ANSI: 4 [ 7.293808] sd 7:0:0:0: Attached scsi generic sg2 type 0 [ 7.294090] sd 6:0:0:0: Attached scsi generic sg3 type 0 [ 7.294520] sd 7:0:0:0: [sdb] 15874048 512-byte logical blocks: (8.12 GB/7.56 GiB) [ 7.295129] sd 7:0:0:0: [sdb] Write Protect is off [ 7.295133] sd 7:0:0:0: [sdb] Mode Sense: 23 00 00 00 [ 7.295136] sd 7:0:0:0: [sdb] Assuming drive cache: write through [ 7.310132] sd 7:0:0:0: [sdb] Assuming drive cache: write through [ 7.321368] sdb: sdb1 [ 7.325130] sd 7:0:0:0: [sdb] Assuming drive cache: write through [ 7.335891] sd 7:0:0:0: [sdb] Attached SCSI removable disk [ 8.569404] udev: starting version 149 [ 10.540968] type=1505 audit(1264132427.603:2): operation="profile_load" pid=855 name="/sbin/dhclient3" [ 10.541305] type=1505 audit(1264132427.603:3): operation="profile_load" pid=855 name="/usr/lib/NetworkManager/nm-dhcp-client.action" [ 10.541500] type=1505 audit(1264132427.603:4): operation="profile_load" pid=855 name="/usr/lib/connman/scripts/dhclient-script" [ 10.706087] i2c i2c-0: nForce2 SMBus adapter at 0x3040 [ 10.706161] i2c i2c-1: nForce2 SMBus adapter at 0x3000 [ 10.767022] k8temp 0000:00:18.3: Temperature readouts might be wrong - check erratum #141 [ 11.017668] lirc_dev: IR Remote Control driver registered, major 61 [ 11.089662] ricoh-mmc: Ricoh MMC Controller disabling driver [ 11.089667] ricoh-mmc: Copyright(c) Philip Langdale [ 11.089774] ricoh-mmc: Ricoh MMC controller found at 0000:01:04.2 [1180:0843] (rev 12) [ 11.089791] ricoh-mmc: Controller is now disabled. [ 11.114338] cfg80211: Calling CRDA to update world regulatory domain [ 11.114985] sdhci: Secure Digital Host Controller Interface driver [ 11.114989] sdhci: Copyright(c) Pierre Ossman [ 11.664582] nvidia: module license 'NVIDIA' taints kernel. [ 11.664589] Disabling lock debugging due to kernel taint [ 11.754273] cfg80211: World regulatory domain updated: [ 11.754279] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 11.754283] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 11.754286] (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 11.754289] (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 11.754292] (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 11.754295] (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 12.281563] ACPI: PCI Interrupt Link [LGPU] enabled at IRQ 17 [ 12.281571] alloc irq_desc for 17 on node 0 [ 12.281574] alloc kstat_irqs on node 0 [ 12.281587] nvidia 0000:00:12.0: PCI INT A -> Link[LGPU] -> GSI 17 (level, low) -> IRQ 17 [ 12.281597] nvidia 0000:00:12.0: setting latency timer to 64 [ 12.282017] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 190.53 Wed Dec 9 15:29:46 PST 2009 [ 16.387157] sd 6:0:0:0: [sdc] 1465149168 512-byte logical blocks: (750 GB/698 GiB) [ 16.388632] sd 6:0:0:0: [sdc] Write Protect is off [ 16.388636] sd 6:0:0:0: [sdc] Mode Sense: 1c 00 00 00 [ 16.388639] sd 6:0:0:0: [sdc] Assuming drive cache: write through [ 16.404647] sd 6:0:0:0: [sdc] Assuming drive cache: write through [ 16.416484] sdc: sdc1 [ 16.455653] sd 6:0:0:0: [sdc] Assuming drive cache: write through [ 16.466878] sd 6:0:0:0: [sdc] Attached SCSI disk [ 16.570080] EDAC MC: Ver: 2.1.0 Jan 7 2010 [ 16.572528] sdhci-pci 0000:01:04.1: SDHCI controller found [1180:0822] (rev 22) [ 16.572993] ACPI: PCI Interrupt Link [LNK2] enabled at IRQ 11 [ 16.573000] sdhci-pci 0000:01:04.1: PCI INT B -> Link[LNK2] -> GSI 11 (level, low) -> IRQ 11 [ 16.575104] Registered led device: mmc0:: [ 16.576155] mmc0: SDHCI controller on PCI [0000:01:04.1] using PIO [ 16.584329] lirc_dev: lirc_register_driver: sample_rate: 0 [ 16.584470] enecir: KB3926B detected [ 16.584473] enecir: chip is 0x3909 - 0x24, 0xc0 [ 16.584475] enecir: driver has been succesfully loaded [ 16.589969] acer-wmi: Acer Laptop ACPI-WMI Extras [ 16.609527] lp: driver loaded but no devices found [ 16.619933] EDAC amd64_edac: Ver: 3.2.0 Jan 7 2010 [ 16.620177] EDAC amd64: This node reports that Memory ECC is currently disabled, set F3x44[22] (0000:00:18.3). [ 16.622018] EDAC amd64: WARNING: ECC is disabled by BIOS. Module will NOT be loaded. [ 16.622019] Either Enable ECC in the BIOS, or set 'ecc_enable_override'. [ 16.622021] Also, use of the override can cause unknown side effects. [ 16.622052] amd64_edac: probe of 0000:00:18.2 failed with error -22 [ 16.953365] ACPI: PCI Interrupt Link [LK4E] enabled at IRQ 19 [ 16.953374] alloc irq_desc for 19 on node 0 [ 16.953377] alloc kstat_irqs on node 0 [ 16.953392] ath5k 0000:05:00.0: PCI INT A -> Link[LK4E] -> GSI 19 (level, low) -> IRQ 19 [ 16.953403] ath5k 0000:05:00.0: setting latency timer to 64 [ 16.953465] ath5k 0000:05:00.0: registered as 'phy0' [ 17.230321] input: PS/2 Mouse as /devices/platform/i8042/serio1/input/input7 [ 17.264532] input: AlpsPS/2 ALPS GlidePoint as /devices/platform/i8042/serio1/input/input8 [ 17.448955] ath: EEPROM regdomain: 0x65 [ 17.448959] ath: EEPROM indicates we should expect a direct regpair map [ 17.448965] ath: Country alpha2 being used: 00 [ 17.448967] ath: Regpair used: 0x65 [ 17.483353] phy0: Selected rate control algorithm 'minstrel' [ 17.484234] Registered led device: ath5k-phy0::rx [ 17.484262] Registered led device: ath5k-phy0::tx [ 17.484266] ath5k phy0: Atheros AR2425 chip found (MAC: 0xe2, PHY: 0x70) [ 17.955910] ACPI: PCI Interrupt Link [LAZA] enabled at IRQ 21 [ 17.955920] HDA Intel 0000:00:07.0: PCI INT A -> Link[LAZA] -> GSI 21 (level, low) -> IRQ 21 [ 17.955968] HDA Intel 0000:00:07.0: setting latency timer to 64 [ 19.596578] EXT4-fs (sda10): mounted filesystem with ordered data mode [ 19.735205] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:07.0/input/input9 [ 31.886753] kjournald starting. Commit interval 5 seconds [ 31.887030] EXT3 FS on sda7, internal journal [ 31.887037] EXT3-fs: mounted filesystem with writeback data mode. [ 32.163937] kjournald starting. Commit interval 5 seconds [ 32.164543] EXT3 FS on sda11, internal journal [ 32.164556] EXT3-fs: mounted filesystem with writeback data mode. [ 32.419730] kjournald starting. Commit interval 5 seconds [ 32.419995] EXT3 FS on sda12, internal journal [ 32.420001] EXT3-fs: mounted filesystem with writeback data mode. [ 35.710665] kjournald starting. Commit interval 5 seconds [ 35.710920] EXT3 FS on sda15, internal journal [ 35.710926] EXT3-fs: mounted filesystem with writeback data mode. [ 37.757817] kjournald starting. Commit interval 5 seconds [ 37.758107] EXT3 FS on sda3, internal journal [ 37.758114] EXT3-fs: mounted filesystem with writeback data mode. [ 40.120201] EXT4-fs (sda8): mounted filesystem with ordered data mode [ 43.614368] alloc irq_desc for 27 on node 0 [ 43.614374] alloc kstat_irqs on node 0 [ 43.614387] forcedeth 0000:00:0a.0: irq 27 for MSI/MSI-X [ 43.614598] eth0: no link during initialization. [ 43.615639] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 43.865995] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 44.239397] type=1505 audit(1264132461.293:5): operation="profile_load" pid=1579 name="/usr/share/gdm/guest-session/Xsession" [ 44.242455] type=1505 audit(1264132461.303:6): operation="profile_replace" pid=1580 name="/sbin/dhclient3" [ 44.242820] type=1505 audit(1264132461.303:7): operation="profile_replace" pid=1580 name="/usr/lib/NetworkManager/nm-dhcp-client.action" [ 44.243027] type=1505 audit(1264132461.303:8): operation="profile_replace" pid=1580 name="/usr/lib/connman/scripts/dhclient-script" [ 44.273492] type=1505 audit(1264132461.333:9): operation="profile_load" pid=1581 name="/usr/bin/evince" [ 44.279107] type=1505 audit(1264132461.333:10): operation="profile_load" pid=1581 name="/usr/bin/evince-previewer" [ 44.283303] type=1505 audit(1264132461.343:11): operation="profile_load" pid=1581 name="/usr/bin/evince-thumbnailer" [ 44.390000] type=1505 audit(1264132461.443:12): operation="profile_load" pid=1584 name="/usr/lib/cups/backend/cups-pdf" [ 44.390560] type=1505 audit(1264132461.453:13): operation="profile_load" pid=1584 name="/usr/sbin/cupsd" [ 44.436881] type=1505 audit(1264132461.493:14): operation="profile_load" pid=1585 name="/usr/sbin/mysqld" [ 49.986141] __ratelimit: 15 callbacks suppressed [ 49.986147] type=1503 audit(1264132467.043:20): operation="open" pid=1798 parent=1797 profile="/usr/sbin/mysqld" requested_mask="r::" denied_mask="r::" fsuid=0 ouid=0 name="/sys/devices/system/cpu/" [ 51.009161] type=1503 audit(1264132468.063:21): operation="open" pid=1818 parent=1817 profile="/usr/sbin/mysqld" requested_mask="r::" denied_mask="r::" fsuid=0 ouid=0 name="/sys/devices/system/cpu/" [ 51.872942] wlan0: direct probe to AP 00:25:3c:56:69:71 (try 1) [ 51.872978] wlan0: deauthenticating from 00:25:3c:56:69:71 by local choice (reason=3) [ 51.873012] wlan0: direct probe to AP 00:25:3c:56:69:71 (try 1) [ 51.876499] wlan0: direct probe responded [ 51.876506] wlan0: authenticate with AP 00:25:3c:56:69:71 (try 1) [ 51.878686] wlan0: authenticated [ 51.878722] wlan0: associate with AP 00:25:3c:56:69:71 (try 1) [ 51.881066] wlan0: RX AssocResp from 00:25:3c:56:69:71 (capab=0x431 status=0 aid=4) [ 51.881073] wlan0: associated [ 51.882301] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 51.910163] cfg80211: Calling CRDA for country: US [ 51.944255] cfg80211: Received country IE: [ 51.944261] cfg80211: Regulatory domain: US [ 51.944263] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 51.944266] (2402000 KHz - 2477000 KHz @ 40000 KHz), (10000 mBi, 10000 mBm) [ 51.944269] cfg80211: CRDA thinks this should applied: [ 51.944271] cfg80211: Regulatory domain: US [ 51.944272] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 51.944275] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) [ 51.944278] (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm) [ 51.944281] (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 51.944284] (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 51.944287] (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 51.944290] (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm) [ 51.944292] cfg80211: We intersect both of these and get: [ 51.944294] cfg80211: Regulatory domain: 98 [ 51.944296] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 51.944298] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) [ 51.944305] cfg80211: Disabling channel 2467 MHz on phy0 due to Country IE [ 51.944307] cfg80211: Disabling channel 2472 MHz on phy0 due to Country IE [ 51.944310] cfg80211: Disabling channel 2484 MHz on phy0 due to Country IE [ 51.944315] cfg80211: Current regulatory domain updated by AP to: US [ 51.944317] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 51.944321] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) [ 52.034959] type=1503 audit(1264132469.093:22): operation="open" pid=1835 parent=1834 profile="/usr/sbin/mysqld" requested_mask="r::" denied_mask="r::" fsuid=0 ouid=0 name="/sys/devices/system/cpu/" [ 53.058345] type=1503 audit(1264132470.113:23): operation="open" pid=1875 parent=1874 profile="/usr/sbin/mysqld" requested_mask="r::" denied_mask="r::" fsuid=0 ouid=0 name="/sys/devices/system/cpu/" [ 54.087227] type=1503 audit(1264132471.143:24): operation="open" pid=1917 parent=1916 profile="/usr/sbin/mysqld" requested_mask="r::" denied_mask="r::" fsuid=0 ouid=0 name="/sys/devices/system/cpu/" [ 55.118742] type=1503 audit(1264132472.176:25): operation="open" pid=1974 parent=1973 profile="/usr/sbin/mysqld" requested_mask="r::" denied_mask="r::" fsuid=0 ouid=0 name="/sys/devices/system/cpu/" [ 56.141711] type=1503 audit(1264132473.196:26): operation="open" pid=2014 parent=2013 profile="/usr/sbin/mysqld" requested_mask="r::" denied_mask="r::" fsuid=0 ouid=0 name="/sys/devices/system/cpu/" [ 57.164238] type=1503 audit(1264132474.223:27): operation="open" pid=2050 parent=2049 profile="/usr/sbin/mysqld" requested_mask="r::" denied_mask="r::" fsuid=0 ouid=0 name="/sys/devices/system/cpu/" [ 58.189218] type=1503 audit(1264132475.243:28): operation="open" pid=2086 parent=2085 profile="/usr/sbin/mysqld" requested_mask="r::" denied_mask="r::" fsuid=0 ouid=0 name="/sys/devices/system/cpu/" [ 59.213823] type=1503 audit(1264132476.273:29): operation="open" pid=2124 parent=2123 profile="/usr/sbin/mysqld" requested_mask="r::" denied_mask="r::" fsuid=0 ouid=0 name="/sys/devices/system/cpu/" [ 60.235375] type=1503 audit(1264132477.293:30): operation="open" pid=2134 parent=2133 profile="/usr/sbin/mysqld" requested_mask="r::" denied_mask="r::" fsuid=0 ouid=0 name="/sys/devices/system/cpu/" [ 61.262177] type=1503 audit(1264132478.316:31): operation="open" pid=2144 parent=2143 profile="/usr/sbin/mysqld" requested_mask="r::" denied_mask="r::" fsuid=0 ouid=0 name="/sys/devices/system/cpu/" [ 61.950037] wlan0: no IPv6 routers present [ 62.285452] type=1503 audit(1264132479.343:32): operation="open" pid=2158 parent=2157 profile="/usr/sbin/mysqld" requested_mask="r::" denied_mask="r::" fsuid=0 ouid=0 name="/sys/devices/system/cpu/" [ 62.306659] type=1503 audit(1264132479.363:33): operation="open" pid=2167 parent=2166 profile="/usr/sbin/mysqld" requested_mask="r::" denied_mask="r::" fsuid=0 ouid=0 name="/sys/devices/system/cpu/" [ 65.002561] device eth0 entered promiscuous mode [ 65.206223] CPUFREQ: Per core ondemand sysfs interface is deprecated - ignore_nice_load [ 66.010051] Clocksource tsc unstable (delta = -259459837 ns) [ 68.480640] ppdev: user-space parallel port driver [ 76.702602] device eth0 left promiscuous mode [ 93.508907] EXT4-fs (sdc1): warning: mounting fs with errors, running e2fsck is recommended [ 93.548850] EXT4-fs (sdc1): recovery complete [ 93.550313] EXT4-fs (sdc1): mounted filesystem with ordered data mode [ 806.184113] usb 1-2: USB disconnect, address 3 [ 2028.016718] ath5k phy0: noise floor calibration timeout (2457MHz) [ 2295.157102] gnome-screensav[10195]: segfault at 0 ip 00007f69e0bea210 sp 00007fff0e1a3700 error 4 in libGL.so.190.53[7f69e0b53000+a5000]