I plug a digital camera into USB port. There is no response by the operating system. There is no desktop icon, nor is a new device listed in the "Places" menu. Here is the terminal response to "dmesg":
[ 0.297285] pci 0000:00:04.0: PCI bridge, secondary bus 0000:02
[ 0.297288] pci 0000:00:04.0: IO window: 0x3000-0x4fff
[ 0.297293] pci 0000:00:04.0: MEM window: 0xd1200000-0xd21fffff
[ 0.297297] pci 0000:00:04.0: PREFETCH window: 0x000000d0000000-0x000000d0ffffff
[ 0.297302] pci 0000:00:05.0: PCI bridge, secondary bus 0000:08
[ 0.297305] pci 0000:00:05.0: IO window: disabled
[ 0.297309] pci 0000:00:05.0: MEM window: 0xd1100000-0xd11fffff
[ 0.297313] pci 0000:00:05.0: PREFETCH window: disabled
[ 0.297317] pci 0000:00:06.0: PCI bridge, secondary bus 0000:09
[ 0.297320] pci 0000:00:06.0: IO window: 0x2000-0x2fff
[ 0.297325] pci 0000:00:06.0: MEM window: 0xb0000000-0xb00fffff
[ 0.297329] pci 0000:00:06.0: PREFETCH window: 0x000000d1000000-0x000000d10fffff
[ 0.297335] pci 0000:00:14.4: PCI bridge, secondary bus 0000:80
[ 0.297372] pci 0000:00:14.4: IO window: 0x1000-0x1fff
[ 0.297378] pci 0000:00:14.4: MEM window: disabled
[ 0.297383] pci 0000:00:14.4: PREFETCH window: disabled
[ 0.297395] pci 0000:00:01.0: setting latency timer to 64
[ 0.297403] alloc irq_desc for 16 on node -1
[ 0.297406] alloc kstat_irqs on node -1
[ 0.297412] pci 0000:00:04.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.297416] pci 0000:00:04.0: setting latency timer to 64
[ 0.297422] alloc irq_desc for 17 on node -1
[ 0.297424] alloc kstat_irqs on node -1
[ 0.297428] pci 0000:00:05.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 0.297432] pci 0000:00:05.0: setting latency timer to 64
[ 0.297438] alloc irq_desc for 18 on node -1
[ 0.297440] alloc kstat_irqs on node -1
[ 0.297443] pci 0000:00:06.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 0.297447] pci 0000:00:06.0: setting latency timer to 64
[ 0.297456] pci_bus 0000:00: resource 0 io: [0x00-0xffff]
[ 0.297459] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
[ 0.297462] pci_bus 0000:01: resource 0 io: [0x5000-0x5fff]
[ 0.297465] pci_bus 0000:01: resource 1 mem: [0xd2200000-0xd23fffff]
[ 0.297468] pci_bus 0000:01: resource 2 pref mem [0xc0000000-0xcfffffff]
[ 0.297471] pci_bus 0000:02: resource 0 io: [0x3000-0x4fff]
[ 0.297474] pci_bus 0000:02: resource 1 mem: [0xd1200000-0xd21fffff]
[ 0.297476] pci_bus 0000:02: resource 2 pref mem [0xd0000000-0xd0ffffff]
[ 0.297479] pci_bus 0000:08: resource 1 mem: [0xd1100000-0xd11fffff]
[ 0.297482] pci_bus 0000:09: resource 0 io: [0x2000-0x2fff]
[ 0.297485] pci_bus 0000:09: resource 1 mem: [0xb0000000-0xb00fffff]
[ 0.297488] pci_bus 0000:09: resource 2 pref mem [0xd1000000-0xd10fffff]
[ 0.297491] pci_bus 0000:80: resource 0 io: [0x1000-0x1fff]
[ 0.297494] pci_bus 0000:80: resource 3 io: [0x00-0xffff]
[ 0.297497] pci_bus 0000:80: resource 4 mem: [0x000000-0xffffffff]
[ 0.297536] NET: Registered protocol family 2
[ 0.297634] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.297962] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.298564] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.298867] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.298870] TCP reno registered
[ 0.298966] NET: Registered protocol family 1
[ 0.299037] Trying to unpack rootfs image as initramfs...
[ 0.763158] Freeing initrd memory: 7458k freed
[ 0.767524] Simple Boot Flag at 0x44 set to 0x1
[ 0.767696] cpufreq-nforce2: No nForce2 chipset.
[ 0.767722] Scanning for low memory corruption every 60 seconds
[ 0.767820] audit: initializing netlink socket (disabled)
[ 0.767835] type=2000 audit(1262227503.764:1): initialized
[ 0.776813] highmem bounce pool size: 64 pages
[ 0.776818] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 0.778163] VFS: Disk quotas dquot_6.5.2
[ 0.778220] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.778784] fuse init (API version 7.12)
[ 0.778860] msgmni has been set to 1686
[ 0.779250] alg: No test for stdrng (krng)
[ 0.779269] io scheduler noop registered
[ 0.779272] io scheduler anticipatory registered
[ 0.779274] io scheduler deadline registered
[ 0.779316] io scheduler cfq registered (default)
[ 0.944111] pci 0000:01:05.0: Boot video device
[ 0.944271] alloc irq_desc for 25 on node -1
[ 0.944274] alloc kstat_irqs on node -1
[ 0.944284] pcieport-driver 0000:00:04.0: irq 25 for MSI/MSI-X
[ 0.944292] pcieport-driver 0000:00:04.0: setting latency timer to 64
[ 0.944407] alloc irq_desc for 26 on node -1
[ 0.944409] alloc kstat_irqs on node -1
[ 0.944415] pcieport-driver 0000:00:05.0: irq 26 for MSI/MSI-X
[ 0.944421] pcieport-driver 0000:00:05.0: setting latency timer to 64
[ 0.944560] alloc irq_desc for 27 on node -1
[ 0.944562] alloc kstat_irqs on node -1
[ 0.944568] pcieport-driver 0000:00:06.0: irq 27 for MSI/MSI-X
[ 0.944574] pcieport-driver 0000:00:06.0: setting latency timer to 64
[ 0.944643] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.944763] _OSC request failed
[ 0.944860] _OSC request failed
[ 0.944878] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.947814] ACPI: AC Adapter [ACAD] (on-line)
[ 0.947872] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[ 0.947876] ACPI: Power Button [PWRF]
[ 0.947954] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
[ 0.947957] ACPI: Power Button [PWRB]
[ 0.947998] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2
[ 0.948001] ACPI: Sleep Button [SLPB]
[ 0.948051] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input3
[ 0.950991] ACPI: Lid Switch [LID]
[ 0.951407] processor LNXCPU:00: registered as cooling_device0
[ 0.951419] ACPI: Processor [CPU0] (supports 8 throttling states)
[ 0.951518] processor LNXCPU:01: registered as cooling_device1
[ 0.960069] ACPI Exception: AE_OK, No or invalid critical threshold 20090521 thermal-384
[ 0.960126] isapnp: Scanning for PnP cards...
[ 1.000551] Clocksource tsc unstable (delta = -97970617 ns)
[ 1.124588] ACPI: Battery Slot [BAT0] (battery present)
[ 1.343042] isapnp: No Plug & Play device found
[ 1.344222] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 1.345478] brd: module loaded
[ 1.345895] loop: module loaded
[ 1.345958] input: Macintosh mouse button emulation as /devices/virtual/input/input4
[ 1.346023] ahci 0000:00:11.0: version 3.0
[ 1.346073] alloc irq_desc for 22 on node -1
[ 1.346075] alloc kstat_irqs on node -1
[ 1.346080] ahci 0000:00:11.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 1.346265] ahci 0000:00:11.0: AHCI 0001.0100 32 slots 6 ports 3 Gbps 0x3f impl SATA mode
[ 1.346269] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck led clo pmp pio
[ 1.347105] scsi0 : ahci
[ 1.347303] scsi1 : ahci
[ 1.347378] scsi2 : ahci
[ 1.347551] scsi3 : ahci
[ 1.347624] scsi4 : ahci
[ 1.347733] scsi5 : ahci
[ 1.347782] ata1: SATA max UDMA/133 abar m1024@0xd2409000 port 0xd2409100 irq 22
[ 1.347787] ata2: SATA max UDMA/133 abar m1024@0xd2409000 port 0xd2409180 irq 22
[ 1.347791] ata3: SATA max UDMA/133 abar m1024@0xd2409000 port 0xd2409200 irq 22
[ 1.347795] ata4: SATA max UDMA/133 abar m1024@0xd2409000 port 0xd2409280 irq 22
[ 1.347798] ata5: SATA max UDMA/133 abar m1024@0xd2409000 port 0xd2409300 irq 22
[ 1.347802] ata6: SATA max UDMA/133 abar m1024@0xd2409000 port 0xd2409380 irq 22
[ 1.348086] pata_atiixp 0000:00:14.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.348119] pata_atiixp 0000:00:14.1: setting latency timer to 64
[ 1.348191] scsi6 : pata_atiixp
[ 1.348261] scsi7 : pata_atiixp
[ 1.348939] ata7: DUMMY
[ 1.348941] ata8: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x6008 irq 15
[ 1.349612] Fixed MDIO Bus: probed
[ 1.349644] PPP generic driver version 2.4.2
[ 1.349744] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.349798] ehci_hcd 0000:00:12.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 1.349814] ehci_hcd 0000:00:12.2: setting latency timer to 64
[ 1.349818] ehci_hcd 0000:00:12.2: EHCI Host Controller
[ 1.349873] ehci_hcd 0000:00:12.2: new USB bus registered, assigned bus number 1
[ 1.349932] ehci_hcd 0000:00:12.2: applying AMD SB600/SB700 USB freeze workaround
[ 1.349953] ehci_hcd 0000:00:12.2: debug port 1
[ 1.349970] ehci_hcd 0000:00:12.2: irq 17, io mem 0xd2409500
[ 1.360571] ehci_hcd 0000:00:12.2: USB 2.0 started, EHCI 1.00
[ 1.360653] usb usb1: configuration #1 chosen from 1 choice
[ 1.360680] hub 1-0:1.0: USB hub found
[ 1.360689] hub 1-0:1.0: 6 ports detected
[ 1.360783] alloc irq_desc for 19 on node -1
[ 1.360785] alloc kstat_irqs on node -1
[ 1.360791] ehci_hcd 0000:00:13.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 1.360800] ehci_hcd 0000:00:13.2: setting latency timer to 64
[ 1.360803] ehci_hcd 0000:00:13.2: EHCI Host Controller
[ 1.360830] ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 2
[ 1.360851] ehci_hcd 0000:00:13.2: applying AMD SB600/SB700 USB freeze workaround
[ 1.360870] ehci_hcd 0000:00:13.2: debug port 1
[ 1.360888] ehci_hcd 0000:00:13.2: irq 19, io mem 0xd2409400
[ 1.372075] ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00
[ 1.372142] usb usb2: configuration #1 chosen from 1 choice
[ 1.372165] hub 2-0:1.0: USB hub found
[ 1.372172] hub 2-0:1.0: 6 ports detected
[ 1.372263] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.372316] ohci_hcd 0000:00:12.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.372325] ohci_hcd 0000:00:12.0: setting latency timer to 64
[ 1.372329] ohci_hcd 0000:00:12.0: OHCI Host Controller
[ 1.372358] ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 3
[ 1.372383] ohci_hcd 0000:00:12.0: irq 16, io mem 0xd2408000
[ 1.432194] usb usb3: configuration #1 chosen from 1 choice
[ 1.432217] hub 3-0:1.0: USB hub found
[ 1.432226] hub 3-0:1.0: 3 ports detected
[ 1.432274] ohci_hcd 0000:00:12.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.432283] ohci_hcd 0000:00:12.1: setting latency timer to 64
[ 1.432287] ohci_hcd 0000:00:12.1: OHCI Host Controller
[ 1.432318] ohci_hcd 0000:00:12.1: new USB bus registered, assigned bus number 4
[ 1.432333] ohci_hcd 0000:00:12.1: irq 16, io mem 0xd2407000
[ 1.488100] usb usb4: configuration #1 chosen from 1 choice
[ 1.488124] hub 4-0:1.0: USB hub found
[ 1.488166] hub 4-0:1.0: 3 ports detected
[ 1.488219] ohci_hcd 0000:00:13.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 1.488228] ohci_hcd 0000:00:13.0: setting latency timer to 64
[ 1.488232] ohci_hcd 0000:00:13.0: OHCI Host Controller
[ 1.488266] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 5
[ 1.488287] ohci_hcd 0000:00:13.0: irq 18, io mem 0xd2406000
[ 1.544101] usb usb5: configuration #1 chosen from 1 choice
[ 1.544124] hub 5-0:1.0: USB hub found
[ 1.544167] hub 5-0:1.0: 3 ports detected
[ 1.544217] ohci_hcd 0000:00:13.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 1.544226] ohci_hcd 0000:00:13.1: setting latency timer to 64
[ 1.544230] ohci_hcd 0000:00:13.1: OHCI Host Controller
[ 1.544257] ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 6
[ 1.544272] ohci_hcd 0000:00:13.1: irq 18, io mem 0xd2405000
[ 1.600085] usb usb6: configuration #1 chosen from 1 choice
[ 1.600109] hub 6-0:1.0: USB hub found
[ 1.600158] hub 6-0:1.0: 3 ports detected
[ 1.600212] ohci_hcd 0000:00:14.5: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 1.600221] ohci_hcd 0000:00:14.5: setting latency timer to 64
[ 1.600225] ohci_hcd 0000:00:14.5: OHCI Host Controller
[ 1.600252] ohci_hcd 0000:00:14.5: new USB bus registered, assigned bus number 7
[ 1.600267] ohci_hcd 0000:00:14.5: irq 18, io mem 0xd2404000
[ 1.656091] usb usb7: configuration #1 chosen from 1 choice
[ 1.656114] hub 7-0:1.0: USB hub found
[ 1.656158] hub 7-0:1.0: 2 ports detected
[ 1.656207] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.656287] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 1.668127] ata3: SATA link down (SStatus 0 SControl 300)
[ 1.668168] ata4: SATA link down (SStatus 0 SControl 300)
[ 1.668203] ata5: SATA link down (SStatus 0 SControl 300)
[ 1.668241] ata6: SATA link down (SStatus 0 SControl 300)
[ 1.678365] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.678371] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.678400] usb 1-4: new high speed USB device using ehci_hcd and address 2
[ 1.678462] mice: PS/2 mouse device common for all mice
[ 1.678573] rtc_cmos 00:05: RTC can wake from S4
[ 1.678606] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
[ 1.678634] rtc0: alarms up to one day, 114 bytes nvram, hpet irqs
[ 1.678729] device-mapper: uevent: version 1.0.3
[ 1.680776] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: <email address hidden>
[ 1.680966] device-mapper: multipath: version 1.1.0 loaded
[ 1.680969] device-mapper: multipath round-robin: version 1.0.0 loaded
[ 1.681136] EISA: Probing bus 0 at eisa.0
[ 1.681181] Cannot allocate resource for EISA slot 1
[ 1.681183] Cannot allocate resource for EISA slot 2
[ 1.681185] Cannot allocate resource for EISA slot 3
[ 1.681187] Cannot allocate resource for EISA slot 4
[ 1.681189] Cannot allocate resource for EISA slot 5
[ 1.681191] Cannot allocate resource for EISA slot 6
[ 1.681202] EISA: Detected 0 cards.
[ 1.681539] cpuidle: using governor ladder
[ 1.681541] cpuidle: using governor menu
[ 1.682002] TCP cubic registered
[ 1.682147] NET: Registered protocol family 10
[ 1.682574] lo: Disabled Privacy Extensions
[ 1.682881] NET: Registered protocol family 17
[ 1.682897] Bluetooth: L2CAP ver 2.13
[ 1.682899] Bluetooth: L2CAP socket layer initialized
[ 1.682902] Bluetooth: SCO (Voice Link) ver 0.6
[ 1.682904] Bluetooth: SCO socket layer initialized
[ 1.682994] Bluetooth: RFCOMM TTY layer initialized
[ 1.682997] Bluetooth: RFCOMM socket layer initialized
[ 1.682999] Bluetooth: RFCOMM ver 1.11
[ 1.683013] powernow-k8: Found 1 AMD Turion(tm) X2 Ultra Dual-Core Mobile ZM-80 processors (2 cpu cores) (version 2.20.00)
[ 1.683053] powernow-k8: 0 : pstate 0 (2100 MHz)
[ 1.683056] powernow-k8: 1 : pstate 1 (1050 MHz)
[ 1.683058] powernow-k8: 2 : pstate 2 (525 MHz)
[ 1.684357] Using IPI No-Shortcut mode
[ 1.684411] PM: Resume from disk failed.
[ 1.684423] registered taskstats version 1
[ 1.684608] Magic number: 5:811:764
[ 1.684726] rtc_cmos 00:05: setting system clock to 2009-12-31 02:45:06 UTC (1262227506)
[ 1.684729] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 1.684731] EDD information not available.
[ 1.701616] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input5
[ 1.832035] ata2: softreset failed (device not ready)
[ 1.832039] ata2: applying SB600 PMP SRST workaround and retrying
[ 1.832056] ata1: softreset failed (device not ready)
[ 1.832059] ata1: applying SB600 PMP SRST workaround and retrying
[ 1.996039] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.996063] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.996702] ata1.00: ATA-8: ST9250827AS, 3.AHC, max UDMA/100
[ 1.996706] ata1.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 31/32)
[ 1.997523] ata1.00: configured for UDMA/100
[ 1.997649] scsi 0:0:0:0: Direct-Access ATA ST9250827AS 3.AH PQ: 0 ANSI: 5
[ 1.997776] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 1.997820] sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB)
[ 1.997862] sd 0:0:0:0: [sda] Write Protect is off
[ 1.997865] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.997887] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.998009] sda: sda1 sda2 <
[ 2.008953] ata2.00: ATAPI: Optiarc DVD RW AD-7561S, AH03, max UDMA/100
[ 2.022543] ata2.00: configured for UDMA/100
[ 2.023964] scsi 1:0:0:0: CD-ROM Optiarc DVD RW AD-7561S AH03 PQ: 0 ANSI: 5
[ 2.029022] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 2.029025] Uniform CD-ROM driver Revision: 3.20
[ 2.029116] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 2.029155] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 2.037949] sda5 >
[ 2.038184] sd 0:0:0:0: [sda] Attached SCSI disk
[ 2.063295] usb 1-4: configuration #1 chosen from 1 choice
[ 2.176101] usb 2-2: new high speed USB device using ehci_hcd and address 2
[ 2.184153] Freeing unused kernel memory: 540k freed
[ 2.184667] Write protecting the kernel text: 4568k
[ 2.184705] Write protecting the kernel read-only data: 1836k
[ 2.335952] acpi device:05: registered as cooling_device2
[ 2.336095] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:01/device:02/input/input6
[ 2.336138] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
[ 2.363198] usb 2-2: configuration #1 chosen from 1 choice
[ 2.384930] Linux agpgart interface v0.103
[ 2.423003] [drm] Initialized drm 1.1.0 20060810
[ 2.448132] [drm] radeon default to kernel modesetting DISABLED.
[ 2.448946] pci 0000:01:05.0: power state changed by ACPI to D0
[ 2.448959] pci 0000:01:05.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 2.448966] pci 0000:01:05.0: setting latency timer to 64
[ 2.449093] [drm] Initialized radeon 1.31.0 20080528 for 0000:01:05.0 on minor 0
[ 2.452628] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 2.452645] r8169 0000:09:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 2.452678] r8169 0000:09:00.0: setting latency timer to 64
[ 2.452717] alloc irq_desc for 28 on node -1
[ 2.452720] alloc kstat_irqs on node -1
[ 2.452734] r8169 0000:09:00.0: irq 28 for MSI/MSI-X
[ 2.453334] eth0: RTL8168c/8111c at 0xf82e4000, 00:1e:68:d1:f7:95, XID 3c4000c0 IRQ 28
[ 2.460924] Initializing USB Mass Storage driver...
[ 2.461091] scsi8 : SCSI emulation for USB Mass Storage devices
[ 2.461387] usb-storage: device found at 2
[ 2.461390] usb-storage: waiting for device to settle before scanning
[ 2.461401] usbcore: registered new interface driver usb-storage
[ 2.461405] USB Mass Storage support registered.
[ 2.767074] usb 6-1: new full speed USB device using ohci_hcd and address 2
[ 2.994156] usb 6-1: configuration #1 chosen from 1 choice
[ 3.128156] usb 7-1: new full speed USB device using ohci_hcd and address 2
[ 3.322466] usb 7-1: configuration #1 chosen from 1 choice
[ 3.367797] PM: Starting manual resume from disk
[ 3.367802] PM: Resume from partition 8:5
[ 3.367804] PM: Checking hibernation image.
[ 3.367964] PM: Resume from disk failed.
[ 3.402649] EXT4-fs (sda1): barriers enabled
[ 3.421203] kjournald2 starting: pid 415, dev sda1:8, commit interval 5 seconds
[ 3.421216] EXT4-fs (sda1): delayed allocation enabled
[ 3.421220] EXT4-fs: file extents enabled
[ 3.447626] EXT4-fs: mballoc enabled
[ 3.447640] EXT4-fs (sda1): mounted filesystem with ordered data mode
[ 3.462996] usb 7-2: new full speed USB device using ohci_hcd and address 3
[ 3.627092] usb 7-2: configuration #1 chosen from 1 choice
[ 3.636081] usbcore: registered new interface driver hiddev
[ 3.636137] usbcore: registered new interface driver usbhid
[ 3.636140] usbhid: v2.6:USB HID core driver
[ 4.210434] type=1505 audit(1262227509.025:2): operation="profile_load" pid=442 name=/usr/share/gdm/guest-session/Xsession
[ 4.212824] type=1505 audit(1262227509.027:3): operation="profile_load" pid=443 name=/sbin/dhclient3
[ 4.213149] type=1505 audit(1262227509.027:4): operation="profile_load" pid=443 name=/usr/lib/NetworkManager/nm-dhcp-client.action
[ 4.213313] type=1505 audit(1262227509.027:5): operation="profile_load" pid=443 name=/usr/lib/connman/scripts/dhclient-script
[ 4.267848] type=1505 audit(1262227509.079:6): operation="profile_load" pid=444 name=/usr/bin/evince
[ 4.272605] type=1505 audit(1262227509.087:7): operation="profile_load" pid=444 name=/usr/bin/evince-previewer
[ 4.275373] type=1505 audit(1262227509.087:8): operation="profile_load" pid=444 name=/usr/bin/evince-thumbnailer
[ 4.295258] type=1505 audit(1262227509.107:9): operation="profile_load" pid=446 name=/usr/lib/cups/backend/cups-pdf
[ 5.459457] Adding 8305564k swap on /dev/sda5. Priority:-1 extents:1 across:8305564k
[ 5.950430] EXT4-fs (sda1): internal journal on sda1:8
[ 6.858181] udev: starting version 147
[ 7.460381] usb-storage: device scan complete
[ 7.462307] scsi 8:0:0:0: Direct-Access Generic- Multi-Card 1.00 PQ: 0 ANSI: 0 CCS
[ 7.463585] sd 8:0:0:0: Attached scsi generic sg2 type 0
[ 7.470593] sd 8:0:0:0: [sdb] Attached SCSI removable disk
[ 8.273490] Bluetooth: Generic Bluetooth USB driver ver 0.5
[ 8.273638] usbcore: registered new interface driver btusb
[ 8.467687] shpchp 0000:00:01.0: HPC vendor_id 1022 device_id 9602 ss_vid 0 ss_did 0
[ 8.467693] shpchp 0000:00:01.0: Cannot reserve MMIO region
[ 8.467725] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 8.471317] lib80211: common routines for IEEE802.11 drivers
[ 8.471322] lib80211_crypt: registered algorithm 'NULL'
[ 8.480869] input: Wacom ISDv4 93 as /devices/pci0000:00/0000:00:14.5/usb7/7-2/7-2:1.0/input/input7
[ 8.482848] input: Wacom ISDv4 93 as /devices/pci0000:00/0000:00:14.5/usb7/7-2/7-2:1.1/input/input8
[ 8.482903] usbcore: registered new interface driver wacom
[ 8.482906] wacom: v1.51:USB Wacom Graphire and Wacom Intuos tablet driver
[ 8.494176] lirc_dev: IR Remote Control driver registered, major 61
[ 9.247750] wl: module license 'MIXED/Proprietary' taints kernel.
[ 9.247756] Disabling lock debugging due to kernel taint
[ 9.250049] wl 0000:08:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 9.250058] wl 0000:08:00.0: setting latency timer to 64
[ 9.270351] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
[ 9.273074] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 9.274572] lirc_dev: lirc_register_driver: sample_rate: 0
[ 9.274706] enecir: KB3926C detected, driver support is not complete!
[ 9.274711] enecir: chip is 0x3926 - 0x00, 0xc0
[ 9.274720] enecir: hardware features:
[ 9.274723] enecir: learning and tx off, gpio40_learn off, fan_in off
[ 9.274727] enecir: driver has been succesfully loaded
[ 9.410825] Linux video capture interface: v2.00
[ 9.446494] lib80211_crypt: registered algorithm 'TKIP'
[ 9.446629] eth1: Broadcom BCM432b 802.11 Wireless Controller 5.10.91.9
[ 9.453220] udev: renamed network interface eth1 to eth2
[ 9.562417] uvcvideo: Found UVC 1.00 device CNF7060 (04f2:b09b)
[ 9.578922] input: CNF7060 as /devices/pci0000:00/0000:00:13.2/usb2/2-2/2-2:1.0/input/input9
[ 9.578981] usbcore: registered new interface driver uvcvideo
[ 9.578985] USB Video Class driver (v0.1.0)
[ 9.650446] lp: driver loaded but no devices found
[ 10.055761] input: HP WMI hotkeys as /devices/virtual/input/input10
[ 10.134329] Synaptics Touchpad, model: 1, fw: 6.3, id: 0x180b1, caps: 0xa04711/0xa00000
[ 10.202691] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input11
[ 11.791443] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 11.791447] Bluetooth: BNEP filters: protocol multicast
[ 11.830686] __ratelimit: 12 callbacks suppressed
[ 11.830690] type=1505 audit(1262227516.643:14): operation="profile_replace" pid=925 name=/usr/share/gdm/guest-session/Xsession
[ 11.832300] type=1505 audit(1262227516.643:15): operation="profile_replace" pid=926 name=/sbin/dhclient3
[ 11.832651] type=1505 audit(1262227516.647:16): operation="profile_replace" pid=926 name=/usr/lib/NetworkManager/nm-dhcp-client.action
[ 11.832813] type=1505 audit(1262227516.647:17): operation="profile_replace" pid=926 name=/usr/lib/connman/scripts/dhclient-script
[ 11.837247] type=1505 audit(1262227516.651:18): operation="profile_replace" pid=927 name=/usr/bin/evince
[ 11.841980] type=1505 audit(1262227516.655:19): operation="profile_replace" pid=927 name=/usr/bin/evince-previewer
[ 11.844799] type=1505 audit(1262227516.659:20): operation="profile_replace" pid=927 name=/usr/bin/evince-thumbnailer
[ 11.850693] type=1505 audit(1262227516.663:21): operation="profile_replace" pid=929 name=/usr/lib/cups/backend/cups-pdf
[ 11.851051] type=1505 audit(1262227516.663:22): operation="profile_replace" pid=929 name=/usr/sbin/cupsd
[ 11.853012] type=1505 audit(1262227516.667:23): operation="profile_replace" pid=930 name=/usr/sbin/mysqld
[ 11.884009] HDA Intel 0000:00:14.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 11.884042] HDA Intel 0000:00:14.2: setting latency timer to 64
[ 12.003566] Bridge firewalling registered
[ 12.087289] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:14.2/input/input12
[ 15.178533] r8169: eth0: link down
[ 15.178754] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 17.392390] __ratelimit: 6 callbacks suppressed
[ 17.392394] type=1503 audit(1262227522.203:26): operation="open" pid=1134 parent=1133 profile="/usr/sbin/mysqld" requested_mask="r::" denied_mask="r::" fsuid=0 ouid=0 name="/sys/devices/system/cpu/"
[ 17.618717] type=1503 audit(1262227522.431:27): operation="open" pid=1278 parent=1277 profile="/usr/sbin/mysqld" requested_mask="r::" denied_mask="r::" fsuid=0 ouid=0 name="/sys/devices/system/cpu/"
[ 17.897254] type=1503 audit(1262227522.711:28): operation="open" pid=1394 parent=1285 profile="/usr/sbin/mysqld" requested_mask="r::" denied_mask="r::" fsuid=0 ouid=0 name="/sys/devices/system/cpu/"
[ 18.718058] type=1503 audit(1262227523.531:29): operation="open" pid=1406 parent=1405 profile="/usr/sbin/mysqld" requested_mask="r::" denied_mask="r::" fsuid=0 ouid=0 name="/sys/devices/system/cpu/"
[ 19.754747] type=1503 audit(1262227524.567:30): operation="open" pid=1423 parent=1422 profile="/usr/sbin/mysqld" requested_mask="r::" denied_mask="r::" fsuid=0 ouid=0 name="/sys/devices/system/cpu/"
[ 19.799491] type=1503 audit(1262227524.611:31): operation="open" pid=1434 parent=1433 profile="/usr/sbin/mysqld" requested_mask="r::" denied_mask="r::" fsuid=0 ouid=0 name="/sys/devices/system/cpu/"
[ 21.194584] [drm] Setting GART location based on new memory map
[ 21.212574] [drm] Loading RS780/RS880 CP Microcode
[ 21.212768] [drm] Loading RS780/RS880 PFP Microcode
[ 21.227708] [drm] Resetting GPU
[ 21.227764] [drm] writeback test succeeded in 1 usecs
[ 25.432030] eth2: no IPv6 routers present
[ 29.800291] CPU0 attaching NULL sched-domain.
[ 29.800298] CPU1 attaching NULL sched-domain.
[ 29.816570] CPU0 attaching sched-domain:
[ 29.816574] domain 0: span 0-1 level MC
[ 29.816577] groups: 0 1
[ 29.816583] CPU1 attaching sched-domain:
[ 29.816585] domain 0: span 0-1 level MC
[ 29.816587] groups: 1 0
[ 31.195721] ppdev: user-space parallel port driver
[ 69.938217] ACPI Error (dsfield-0140): [SGIN] Namespace lookup failure, AE_ALREADY_EXISTS
[ 69.938226] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.WMID.HWMC] (Node f701a360), AE_ALREADY_EXISTS
[ 69.938239] ACPI: Marking method HWMC as Serialized because of AE_ALREADY_EXISTS error
[ 69.938270] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.WMID.WMAD] (Node f701a420), AE_ALREADY_EXISTS
[ 69.938277] ACPI: Marking method WMAD as Serialized because of AE_ALREADY_EXISTS error
[ 69.938631] ACPI Error (psargs-0359): [RETC] Namespace lookup failure, AE_NOT_FOUND
[ 69.938637] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.WMID.HWMC] (Node f701a360), AE_NOT_FOUND
[ 69.938665] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.WMID.WMAD] (Node f701a420), AE_NOT_FOUND
ProblemType: Bug
Architecture: i386
AudioDevicesInUse:
USER PID ACCESS COMMAND
/dev/snd/controlC0: avery 2194 F.... pulseaudio
CRDA: Error: [Errno 2] No such file or directory
Card0.Amixer.info:
Card hw:0 'SB'/'HDA ATI SB at 0xd2400000 irq 16'
Mixer name : 'Realtek ALC268'
Components : 'HDA:10ec0268,103c30f1,00100003 HDA:10573055,103c30f1,00100700'
Controls : 16
Simple ctrls : 13
Date: Wed Dec 30 22:04:11 2009
DistroRelease: Ubuntu 9.10
HibernationDevice: RESUME=UUID=1687a633-ab42-415c-be77-df96f031e12c
InstallationMedia: Ubuntu 9.10 "Karmic Koala" - Release i386 (20091028.5)
MachineType: Hewlett-Packard HP Pavilion tx2500 Notebook PC
NonfreeKernelModules: wl
Package: linux-image-2.6.31-16-generic 2.6.31-16.53
ProcCmdLine: BOOT_IMAGE=/boot/vmlinuz-2.6.31-16-generic root=UUID=d7c48d6f-adaa-401e-9d41-a5c9c73bb9fa ro quiet splash i8042.reset
ProcEnviron:
LANG=en_US.UTF-8
SHELL=/bin/bash
ProcVersionSignature: Ubuntu 2.6.31-16.53-generic
RelatedPackageVersions:
linux-backports-modules-2.6.31-16-generic N/A
linux-firmware 1.25
SourcePackage: linux
Uname: Linux 2.6.31-16-generic i686
dmi.bios.date: 07/08/2008
dmi.bios.vendor: Hewlett-Packard
dmi.bios.version: F.06
dmi.board.asset.tag: Base Board Asset Tag
dmi.board.name: 30F1
dmi.board.vendor: Quanta
dmi.board.version: 97.18
dmi.chassis.type: 10
dmi.chassis.vendor: Quanta
dmi.chassis.version: N/A
dmi.modalias: dmi:bvnHewlett-Packard:bvrF.06:bd07/08/2008:svnHewlett-Packard:pnHPPaviliontx2500NotebookPC:pvrRev1:rvnQuanta:rn30F1:rvr97.18:cvnQuanta:ct10:cvrN/A:
dmi.product.name: HP Pavilion tx2500 Notebook PC
dmi.product.version: Rev 1
dmi.sys.vendor: Hewlett-Packard
Hi Avery,
This bug was reported a while ago and there hasn't been any activity in it recently. We were wondering if this is still an issue? Can you try with the latest development release of Ubuntu? ISO CD images are available from http://
If it remains an issue, could you run the following command from a Terminal (Applications-
apport-collect -p linux 501810
Also, if you could test the latest upstream kernel available that would be great. It will allow additional upstream developers to examine the issue. Refer to https:/
Thanks in advance.
[This is an automated message. Apologies if it has reached you inappropriately; please just reply to this message indicating so.]