ProblemType: Bug AlsaDevices: total 0 drwxr-xr-x 2 root root 60 2009-12-21 00:17 by-path crw-rw----+ 1 root audio 116, 7 2009-12-21 00:17 controlC0 crw-rw----+ 1 root audio 116, 6 2009-12-21 00:17 pcmC0D0c crw-rw----+ 1 root audio 116, 5 2009-12-21 01:26 pcmC0D0p crw-rw----+ 1 root audio 116, 4 2009-12-21 00:17 pcmC0D1p crw-rw----+ 1 root audio 116, 3 2009-12-21 00:17 seq crw-rw----+ 1 root audio 116, 2 2009-12-21 00:17 timer AplayDevices: **** List of PLAYBACK Hardware Devices **** card 0: IXP [ATI IXP], device 0: ATI IXP AC97 [ATI IXP AC97] Subdevices: 0/1 Subdevice #0: subdevice #0 card 0: IXP [ATI IXP], device 1: ATI IXP IEC958 [ATI IXP IEC958 (AC97)] Subdevices: 1/1 Subdevice #0: subdevice #0 Architecture: i386 ArecordDevices: **** List of CAPTURE Hardware Devices **** card 0: IXP [ATI IXP], device 0: ATI IXP AC97 [ATI IXP AC97] Subdevices: 1/1 Subdevice #0: subdevice #0 AudioDevicesInUse: USER PID ACCESS COMMAND /dev/snd/controlC0: apparle 1761 F.... knotify4 apparle 1799 F.... kmix apparle 1808 F.... amarok /dev/snd/pcmC0D0p: apparle 1808 F...m amarok apparle 1864 F...m firefox /dev/snd/timer: apparle 1808 f.... amarok apparle 1864 f.... firefox BootDmesg: [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.31-16-generic (buildd@rothera) (gcc version 4.4.1 (Ubuntu 4.4.1-4ubuntu8) ) #53-Ubuntu SMP Tue Dec 8 04:01:29 UTC 2009 (Ubuntu 2.6.31-16.53-generic) [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] NSC Geode by NSC [ 0.000000] Cyrix CyrixInstead [ 0.000000] Centaur CentaurHauls [ 0.000000] Transmeta GenuineTMx86 [ 0.000000] Transmeta TransmetaCPU [ 0.000000] UMC UMC UMC UMC [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f000 (usable) [ 0.000000] BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 0000000057ef0000 (usable) [ 0.000000] BIOS-e820: 0000000057ef0000 - 0000000057ef3000 (ACPI NVS) [ 0.000000] BIOS-e820: 0000000057ef3000 - 0000000057f00000 (ACPI data) [ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved) [ 0.000000] DMI 2.2 present. [ 0.000000] Phoenix BIOS detected: BIOS may corrupt low RAM, working around it. [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) [ 0.000000] last_pfn = 0x57ef0 max_arch_pfn = 0x100000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-CEFFF write-protect [ 0.000000] CF000-F7FFF uncachable [ 0.000000] F8000-FBFFF write-through [ 0.000000] FC000-FFFFF uncachable [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000 mask FC0000000 write-back [ 0.000000] 1 base 040000000 mask FF0000000 write-back [ 0.000000] 2 base 050000000 mask FF8000000 write-back [ 0.000000] 3 base 057F00000 mask FFFF00000 uncachable [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] Scanning 0 areas for low memory corruption [ 0.000000] modified physical RAM map: [ 0.000000] modified: 0000000000000000 - 0000000000010000 (reserved) [ 0.000000] modified: 0000000000010000 - 000000000009f000 (usable) [ 0.000000] modified: 000000000009f000 - 00000000000a0000 (reserved) [ 0.000000] modified: 00000000000f0000 - 0000000000100000 (reserved) [ 0.000000] modified: 0000000000100000 - 0000000057ef0000 (usable) [ 0.000000] modified: 0000000057ef0000 - 0000000057ef3000 (ACPI NVS) [ 0.000000] modified: 0000000057ef3000 - 0000000057f00000 (ACPI data) [ 0.000000] modified: 00000000e0000000 - 00000000f0000000 (reserved) [ 0.000000] modified: 00000000fec00000 - 0000000100000000 (reserved) [ 0.000000] initial memory mapped : 0 - 00c00000 [ 0.000000] init_memory_mapping: 0000000000000000-00000000377fe000 [ 0.000000] Using x86 segment limits to approximate NX protection [ 0.000000] 0000000000 - 0000400000 page 4k [ 0.000000] 0000400000 - 0037400000 page 2M [ 0.000000] 0037400000 - 00377fe000 page 4k [ 0.000000] kernel direct mapping tables up to 377fe000 @ 10000-15000 [ 0.000000] RAMDISK: 378a1000 - 37fef6c6 [ 0.000000] Allocated new RAMDISK: 008ad000 - 00ffb6c6 [ 0.000000] Move RAMDISK from 00000000378a1000 - 0000000037fef6c5 to 008ad000 - 00ffb6c5 [ 0.000000] ACPI: RSDP 000f87c0 00014 (v00 RS400 ) [ 0.000000] ACPI: RSDT 57ef3040 00030 (v01 RS400 AWRDACPI 42302E31 AWRD 00000000) [ 0.000000] ACPI: FACP 57ef30c0 00074 (v01 RS400 AWRDACPI 42302E31 AWRD 00000000) [ 0.000000] ACPI: DSDT 57ef3180 0416F (v01 RS400 AWRDACPI 00001000 MSFT 0100000E) [ 0.000000] ACPI: FACS 57ef0000 00040 [ 0.000000] ACPI: MCFG 57ef7440 0003C (v01 RS400 AWRDACPI 42302E31 AWRD 00000000) [ 0.000000] ACPI: APIC 57ef7340 00084 (v01 RS400 AWRDACPI 42302E31 AWRD 00000000) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] 518MB HIGHMEM available. [ 0.000000] 887MB LOWMEM available. [ 0.000000] mapped low ram: 0 - 377fe000 [ 0.000000] low ram: 0 - 377fe000 [ 0.000000] node 0 low ram: 00000000 - 377fe000 [ 0.000000] node 0 bootmap 00011000 - 00017f00 [ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 00377fe000] [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] [ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000] [ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000] [ 0.000000] #3 [0000100000 - 00008a80a0] TEXT DATA BSS ==> [0000100000 - 00008a80a0] [ 0.000000] #4 [000009f000 - 0000100000] BIOS reserved ==> [000009f000 - 0000100000] [ 0.000000] #5 [00008a9000 - 00008ac072] BRK ==> [00008a9000 - 00008ac072] [ 0.000000] #6 [0000010000 - 0000011000] PGTABLE ==> [0000010000 - 0000011000] [ 0.000000] #7 [00008ad000 - 0000ffb6c6] NEW RAMDISK ==> [00008ad000 - 0000ffb6c6] [ 0.000000] #8 [0000011000 - 0000018000] BOOTMAP ==> [0000011000 - 0000018000] [ 0.000000] found SMP MP-table at [c00f4070] f4070 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000010 -> 0x00001000 [ 0.000000] Normal 0x00001000 -> 0x000377fe [ 0.000000] HighMem 0x000377fe -> 0x00057ef0 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[2] active PFN ranges [ 0.000000] 0: 0x00000010 -> 0x0000009f [ 0.000000] 0: 0x00000100 -> 0x00057ef0 [ 0.000000] On node 0 totalpages: 360063 [ 0.000000] free_area_init_node: node 0, pgdat c0784940, node_mem_map c1000200 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 3951 pages, LIFO batch:0 [ 0.000000] Normal zone: 1744 pages used for memmap [ 0.000000] Normal zone: 221486 pages, LIFO batch:31 [ 0.000000] HighMem zone: 1038 pages used for memmap [ 0.000000] HighMem zone: 131812 pages, LIFO batch:31 [ 0.000000] Using APIC driver default [ 0.000000] ACPI: PM-Timer IO Port: 0x4008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 4, version 33, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] SMP: Allowing 4 CPUs, 2 hotplug CPUs [ 0.000000] nr_irqs_gsi: 24 [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000 [ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000 [ 0.000000] Allocating PCI resources starting at 57f00000 (gap: 57f00000:88100000) [ 0.000000] NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:4 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 14 pages at c1b07000, static data 35612 bytes [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 357249 [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.31-16-generic root=UUID=44fe68f7-66af-4e76-b9ad-37ad86b129a3 ro [ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Enabling fast FPU save and restore... done. [ 0.000000] Enabling unmasked SIMD FPU exception support... done. [ 0.000000] Initializing CPU#0 [ 0.000000] allocated 7203200 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] Initializing HighMem for node 0 (000377fe:00057ef0) [ 0.000000] Memory: 1404628k/1440704k available (4566k kernel code, 34708k reserved, 2142k data, 540k init, 531400k highmem) [ 0.000000] virtual kernel memory layout: [ 0.000000] fixmap : 0xfff1d000 - 0xfffff000 ( 904 kB) [ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB) [ 0.000000] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB) [ 0.000000] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB) [ 0.000000] .init : 0xc078e000 - 0xc0815000 ( 540 kB) [ 0.000000] .data : 0xc0575bb4 - 0xc078d3c8 (2142 kB) [ 0.000000] .text : 0xc0100000 - 0xc0575bb4 (4566 kB) [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.000000] SLUB: Genslabs=13, HWalign=128, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] NR_IRQS:2304 nr_irqs:440 [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 2799.520 MHz processor. [ 0.000912] Console: colour VGA+ 80x25 [ 0.000917] console [tty0] enabled [ 0.004016] Calibrating delay loop (skipped), value calculated using timer frequency.. 5599.04 BogoMIPS (lpj=11198080) [ 0.004135] Security Framework initialized [ 0.004217] AppArmor: AppArmor initialized [ 0.004274] Mount-cache hash table entries: 512 [ 0.004520] Initializing cgroup subsys ns [ 0.004573] Initializing cgroup subsys cpuacct [ 0.004624] Initializing cgroup subsys memory [ 0.004679] Initializing cgroup subsys freezer [ 0.004728] Initializing cgroup subsys net_cls [ 0.004798] CPU: Trace cache: 12K uops, L1 D cache: 16K [ 0.004886] CPU: L2 cache: 1024K [ 0.004934] CPU: Physical Processor ID: 0 [ 0.004980] CPU: Processor Core ID: 0 [ 0.005030] mce: CPU supports 4 MCE banks [ 0.005090] CPU0: Thermal monitoring enabled (TM1) [ 0.005142] using mwait in idle threads. [ 0.005197] Performance Counters: no PMU driver, software counters only. [ 0.005291] Checking 'hlt' instruction... OK. [ 0.023885] ACPI: Core revision 20090521 [ 0.036451] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.077617] CPU0: Intel(R) Pentium(R) D CPU 2.80GHz stepping 07 [ 0.080001] Booting processor 1 APIC 0x1 ip 0x6000 [ 0.004000] Initializing CPU#1 [ 0.004000] Calibrating delay using timer specific routine.. 5599.99 BogoMIPS (lpj=11199985) [ 0.004000] CPU: Trace cache: 12K uops, L1 D cache: 16K [ 0.004000] CPU: L2 cache: 1024K [ 0.004000] CPU: Physical Processor ID: 0 [ 0.004000] CPU: Processor Core ID: 1 [ 0.004000] mce: CPU supports 4 MCE banks [ 0.004000] CPU1: Thermal monitoring enabled (TM1) [ 0.004000] x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106 [ 0.165113] CPU1: Intel(R) Pentium(R) D CPU 2.80GHz stepping 07 [ 0.165662] checking TSC synchronization [CPU#0 -> CPU#1]: passed. [ 0.168023] Brought up 2 CPUs [ 0.168089] Total of 2 processors activated (11199.03 BogoMIPS). [ 0.168187] CPU0 attaching sched-domain: [ 0.168192] domain 0: span 0-1 level CPU [ 0.168196] groups: 0 1 [ 0.168206] CPU1 attaching sched-domain: [ 0.168209] domain 0: span 0-1 level CPU [ 0.168213] groups: 1 0 [ 0.168307] Booting paravirtualized kernel on bare hardware [ 0.168343] regulator: core version 0.5 [ 0.168343] Time: 0:17:12 Date: 12/21/09 [ 0.168343] NET: Registered protocol family 16 [ 0.168453] EISA bus registered [ 0.168513] ACPI: bus type pci registered [ 0.168658] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255 [ 0.168710] PCI: MCFG area at e0000000 reserved in E820 [ 0.168758] PCI: Using MMCONFIG for extended config space [ 0.168807] PCI: Using configuration type 1 for base access [ 0.173038] bio: create slab at 0 [ 0.173038] ACPI: EC: Look up EC in DSDT [ 0.182994] ACPI: Interpreter enabled [ 0.183047] ACPI: (supports S0 S1 S4 S5) [ 0.183271] ACPI: Using IOAPIC for interrupt routing [ 0.189814] ACPI: No dock devices found. [ 0.190009] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 0.190124] pci 0000:00:00.0: reg 10 32bit mmio: [0xf4000000-0xf7ffffff] [ 0.190132] pci 0000:00:00.0: reg 14 32bit mmio: [0xfdfff000-0xfdffffff] [ 0.190147] pci 0000:00:00.0: reg 1c 64bit mmio: [0xe0000000-0xffffffff] [ 0.190207] pci 0000:00:01.0: reg 10 32bit mmio: [0xf4000000-0xf7ffffff] [ 0.190332] pci 0000:00:11.0: reg 10 io port: [0xff00-0xff07] [ 0.190343] pci 0000:00:11.0: reg 14 io port: [0xfe00-0xfe03] [ 0.190355] pci 0000:00:11.0: reg 18 io port: [0xfd00-0xfd07] [ 0.190366] pci 0000:00:11.0: reg 1c io port: [0xfc00-0xfc03] [ 0.190377] pci 0000:00:11.0: reg 20 io port: [0xfb00-0xfb0f] [ 0.190389] pci 0000:00:11.0: reg 24 32bit mmio: [0xfdffe000-0xfdffe1ff] [ 0.190401] pci 0000:00:11.0: reg 30 32bit mmio: [0x000000-0x07ffff] [ 0.190444] pci 0000:00:11.0: supports D1 D2 [ 0.190520] pci 0000:00:12.0: reg 10 io port: [0xfa00-0xfa07] [ 0.190531] pci 0000:00:12.0: reg 14 io port: [0xf900-0xf903] [ 0.190542] pci 0000:00:12.0: reg 18 io port: [0xf800-0xf807] [ 0.190554] pci 0000:00:12.0: reg 1c io port: [0xf700-0xf703] [ 0.190565] pci 0000:00:12.0: reg 20 io port: [0xf600-0xf60f] [ 0.190576] pci 0000:00:12.0: reg 24 32bit mmio: [0xfdffd000-0xfdffd1ff] [ 0.190588] pci 0000:00:12.0: reg 30 32bit mmio: [0x000000-0x07ffff] [ 0.190631] pci 0000:00:12.0: supports D1 D2 [ 0.190694] pci 0000:00:13.0: reg 10 32bit mmio: [0xfdffc000-0xfdffcfff] [ 0.190832] pci 0000:00:13.1: reg 10 32bit mmio: [0xfdffb000-0xfdffbfff] [ 0.190982] pci 0000:00:13.2: reg 10 32bit mmio: [0xfdffa000-0xfdffafff] [ 0.191072] pci 0000:00:13.2: supports D1 D2 [ 0.191076] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot [ 0.191129] pci 0000:00:13.2: PME# disabled [ 0.191228] pci 0000:00:14.0: reg 10 io port: [0x500-0x50f] [ 0.191240] pci 0000:00:14.0: reg 14 32bit mmio: [0xfdff9000-0xfdff93ff] [ 0.191287] HPET not enabled in BIOS. You might try hpet=force boot option [ 0.191873] pci 0000:00:14.1: reg 10 io port: [0x00-0x07] [ 0.191885] pci 0000:00:14.1: reg 14 io port: [0x00-0x03] [ 0.191896] pci 0000:00:14.1: reg 18 io port: [0x00-0x07] [ 0.191907] pci 0000:00:14.1: reg 1c io port: [0x00-0x03] [ 0.191919] pci 0000:00:14.1: reg 20 io port: [0xf400-0xf40f] [ 0.192182] pci 0000:00:14.5: reg 10 32bit mmio: [0xfdff8000-0xfdff80ff] [ 0.192346] pci 0000:01:05.0: reg 10 32bit mmio: [0xd0000000-0xdfffffff] [ 0.192353] pci 0000:01:05.0: reg 14 io port: [0xee00-0xeeff] [ 0.192361] pci 0000:01:05.0: reg 18 32bit mmio: [0xfdef0000-0xfdefffff] [ 0.192379] pci 0000:01:05.0: reg 30 32bit mmio: [0x000000-0x01ffff] [ 0.192405] pci 0000:01:05.0: supports D1 D2 [ 0.192444] pci 0000:00:01.0: bridge io port: [0xe000-0xefff] [ 0.192449] pci 0000:00:01.0: bridge 32bit mmio: [0xfde00000-0xfdefffff] [ 0.192455] pci 0000:00:01.0: bridge 32bit mmio pref: [0xd0000000-0xdfffffff] [ 0.192545] pci 0000:02:07.0: reg 10 io port: [0xde00-0xdeff] [ 0.192559] pci 0000:02:07.0: reg 14 32bit mmio: [0xfddff000-0xfddff0ff] [ 0.192645] pci 0000:02:07.0: supports D1 D2 [ 0.192648] pci 0000:02:07.0: PME# supported from D1 D2 D3hot D3cold [ 0.192703] pci 0000:02:07.0: PME# disabled [ 0.192820] pci 0000:00:14.4: transparent bridge [ 0.192877] pci 0000:00:14.4: bridge io port: [0xd000-0xdfff] [ 0.192885] pci 0000:00:14.4: bridge 32bit mmio: [0xfdd00000-0xfddfffff] [ 0.192892] pci 0000:00:14.4: bridge 32bit mmio pref: [0xfdc00000-0xfdcfffff] [ 0.192910] pci_bus 0000:00: on NUMA node 0 [ 0.192917] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.193209] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P_._PRT] [ 0.193388] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT] [ 0.214470] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 11) *0, disabled. [ 0.215072] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 11) *0, disabled. [ 0.215672] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11) *0, disabled. [ 0.216258] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11) *0, disabled. [ 0.216856] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11) *0, disabled. [ 0.217454] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 *10 11) [ 0.217973] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 *5 6 7 10 11) [ 0.218491] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 10 *11) [ 0.219140] SCSI subsystem initialized [ 0.219233] libata version 3.00 loaded. [ 0.219233] usbcore: registered new interface driver usbfs [ 0.219233] usbcore: registered new interface driver hub [ 0.219233] usbcore: registered new device driver usb [ 0.219233] ACPI: WMI: Mapper loaded [ 0.219233] PCI: Using ACPI for IRQ routing [ 0.220011] pci 0000:00:00.0: BAR 3: address space collision on of device [0xe0000000-0xffffffff] [ 0.220069] pci 0000:00:00.0: BAR 3: can't allocate resource [ 0.220121] pci 0000:00:01.0: BAR 0: address space collision on of device [0xf4000000-0xf7ffffff] [ 0.220178] pci 0000:00:01.0: BAR 0: can't allocate resource [ 0.232017] Bluetooth: Core ver 2.15 [ 0.232086] NET: Registered protocol family 31 [ 0.232086] Bluetooth: HCI device and connection manager initialized [ 0.232121] Bluetooth: HCI socket layer initialized [ 0.232169] NetLabel: Initializing [ 0.232215] NetLabel: domain hash size = 128 [ 0.232262] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.232326] NetLabel: unlabeled traffic allowed by default [ 0.244018] pnp: PnP ACPI init [ 0.244100] ACPI: bus type pnp registered [ 0.248916] pnp 00:0e: mem resource (0xd0000-0xd3fff) overlaps 0000:00:00.0 BAR 3 (0x0-0x1fffffff), disabling [ 0.248977] pnp 00:0e: mem resource (0xf0000-0xf7fff) overlaps 0000:00:00.0 BAR 3 (0x0-0x1fffffff), disabling [ 0.249036] pnp 00:0e: mem resource (0xf8000-0xfbfff) overlaps 0000:00:00.0 BAR 3 (0x0-0x1fffffff), disabling [ 0.249094] pnp 00:0e: mem resource (0xfc000-0xfffff) overlaps 0000:00:00.0 BAR 3 (0x0-0x1fffffff), disabling [ 0.249153] pnp 00:0e: mem resource (0x0-0x9ffff) overlaps 0000:00:00.0 BAR 3 (0x0-0x1fffffff), disabling [ 0.249211] pnp 00:0e: mem resource (0x100000-0x57eeffff) overlaps 0000:00:00.0 BAR 3 (0x0-0x1fffffff), disabling [ 0.249272] pnp 00:0e: mem resource (0xd0000-0xd3fff) overlaps 0000:00:01.0 BAR 0 (0x0-0x3ffffff), disabling [ 0.249331] pnp 00:0e: mem resource (0xf0000-0xf7fff) overlaps 0000:00:01.0 BAR 0 (0x0-0x3ffffff), disabling [ 0.249389] pnp 00:0e: mem resource (0xf8000-0xfbfff) overlaps 0000:00:01.0 BAR 0 (0x0-0x3ffffff), disabling [ 0.249447] pnp 00:0e: mem resource (0xfc000-0xfffff) overlaps 0000:00:01.0 BAR 0 (0x0-0x3ffffff), disabling [ 0.249505] pnp 00:0e: mem resource (0x0-0x9ffff) overlaps 0000:00:01.0 BAR 0 (0x0-0x3ffffff), disabling [ 0.249563] pnp 00:0e: mem resource (0x100000-0x57eeffff) overlaps 0000:00:01.0 BAR 0 (0x0-0x3ffffff), disabling [ 0.249697] pnp: PnP ACPI: found 15 devices [ 0.249745] ACPI: ACPI bus type pnp unregistered [ 0.249797] PnPBIOS: Disabled by ACPI PNP [ 0.249857] system 00:01: ioport range 0x140-0x15f has been reserved [ 0.249908] system 00:01: ioport range 0x228-0x22f has been reserved [ 0.249959] system 00:01: ioport range 0x4d6-0x4d6 has been reserved [ 0.250009] system 00:01: ioport range 0xc00-0xc01 has been reserved [ 0.250060] system 00:01: ioport range 0xc14-0xc14 has been reserved [ 0.250110] system 00:01: ioport range 0xc50-0xc52 has been reserved [ 0.250160] system 00:01: ioport range 0xc6c-0xc6d has been reserved [ 0.250210] system 00:01: ioport range 0xc6f-0xc6f has been reserved [ 0.250261] system 00:01: ioport range 0xcd4-0xcdf has been reserved [ 0.250312] system 00:01: ioport range 0x4000-0x40fe has been reserved [ 0.250362] system 00:01: ioport range 0x4210-0x4217 has been reserved [ 0.250420] system 00:06: ioport range 0x4d0-0x4d1 has been reserved [ 0.250471] system 00:06: ioport range 0x220-0x225 has been reserved [ 0.250521] system 00:06: ioport range 0x40b-0x41a has been reserved [ 0.250571] system 00:06: ioport range 0x880-0x88f has been reserved [ 0.250630] system 00:0d: iomem range 0xe0000000-0xefffffff has been reserved [ 0.250687] system 00:0e: iomem range 0x57f00000-0x57ffffff could not be reserved [ 0.250744] system 00:0e: iomem range 0x57ef0000-0x57efffff could not be reserved [ 0.250801] system 00:0e: iomem range 0xffff0000-0xffffffff has been reserved [ 0.250853] system 00:0e: iomem range 0xfec00000-0xfec00fff could not be reserved [ 0.250909] system 00:0e: iomem range 0xfee00000-0xfee00fff has been reserved [ 0.250960] system 00:0e: iomem range 0xfff80000-0xfffeffff has been reserved [ 0.285773] AppArmor: AppArmor Filesystem Enabled [ 0.285861] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01 [ 0.285912] pci 0000:00:01.0: IO window: 0xe000-0xefff [ 0.285964] pci 0000:00:01.0: MEM window: 0xfde00000-0xfdefffff [ 0.286015] pci 0000:00:01.0: PREFETCH window: 0xd0000000-0xdfffffff [ 0.286068] pci 0000:00:14.4: PCI bridge, secondary bus 0000:02 [ 0.286119] pci 0000:00:14.4: IO window: 0xd000-0xdfff [ 0.286173] pci 0000:00:14.4: MEM window: 0xfdd00000-0xfddfffff [ 0.286226] pci 0000:00:14.4: PREFETCH window: 0xfdc00000-0xfdcfffff [ 0.286299] pci_bus 0000:00: resource 0 io: [0x00-0xffff] [ 0.286303] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff] [ 0.286307] pci_bus 0000:01: resource 0 io: [0xe000-0xefff] [ 0.286310] pci_bus 0000:01: resource 1 mem: [0xfde00000-0xfdefffff] [ 0.286314] pci_bus 0000:01: resource 2 pref mem [0xd0000000-0xdfffffff] [ 0.286317] pci_bus 0000:02: resource 0 io: [0xd000-0xdfff] [ 0.286321] pci_bus 0000:02: resource 1 mem: [0xfdd00000-0xfddfffff] [ 0.286324] pci_bus 0000:02: resource 2 pref mem [0xfdc00000-0xfdcfffff] [ 0.286327] pci_bus 0000:02: resource 3 io: [0x00-0xffff] [ 0.286331] pci_bus 0000:02: resource 4 mem: [0x000000-0xffffffff] [ 0.286386] NET: Registered protocol family 2 [ 0.286583] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.287159] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.288067] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 0.288777] TCP: Hash tables configured (established 131072 bind 65536) [ 0.288828] TCP reno registered [ 0.289064] NET: Registered protocol family 1 [ 0.289219] Trying to unpack rootfs image as initramfs... [ 0.549560] Freeing initrd memory: 7481k freed [ 0.558515] cpufreq-nforce2: No nForce2 chipset. [ 0.558612] Scanning for low memory corruption every 60 seconds [ 0.558810] audit: initializing netlink socket (disabled) [ 0.558884] type=2000 audit(1261354632.556:1): initialized [ 0.568702] highmem bounce pool size: 64 pages [ 0.568759] HugeTLB registered 4 MB page size, pre-allocated 0 pages [ 0.570819] VFS: Disk quotas dquot_6.5.2 [ 0.570955] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.571806] fuse init (API version 7.12) [ 0.571971] msgmni has been set to 1721 [ 0.572379] alg: No test for stdrng (krng) [ 0.572458] io scheduler noop registered [ 0.572506] io scheduler anticipatory registered [ 0.572553] io scheduler deadline registered [ 0.572659] io scheduler cfq registered (default) [ 0.572717] pci 0000:00:00.0: MSI quirk detected; MSI disabled [ 0.801856] Switched to high resolution mode on CPU 1 [ 0.804069] Switched to high resolution mode on CPU 0 [ 2.232012] pci 0000:00:13.2: EHCI: BIOS handoff failed (BIOS bug?) 01010001 [ 2.232084] pci 0000:01:05.0: Boot video device [ 2.232208] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 2.232291] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 2.232527] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0 [ 2.232585] ACPI: Power Button [PWRF] [ 2.232709] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1 [ 2.232767] ACPI: Power Button [PWRB] [ 2.232894] fan PNP0C0B:00: registered as cooling_device0 [ 2.232948] ACPI: Fan [FAN] (on) [ 2.233353] processor LNXCPU:00: registered as cooling_device1 [ 2.233462] processor LNXCPU:01: registered as cooling_device2 [ 2.236687] thermal LNXTHERM:01: registered as thermal_zone0 [ 2.236745] ACPI: Thermal Zone [THRM] (41 C) [ 2.236868] isapnp: Scanning for PnP cards... [ 2.591425] isapnp: No Plug & Play device found [ 2.593069] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 2.593274] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 2.593465] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A [ 2.593967] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 2.594213] 00:09: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A [ 2.595754] brd: module loaded [ 2.596464] loop: module loaded [ 2.596610] input: Macintosh mouse button emulation as /devices/virtual/input/input2 [ 2.596857] sata_sil 0000:00:11.0: version 2.4 [ 2.596913] alloc irq_desc for 23 on node -1 [ 2.596917] alloc kstat_irqs on node -1 [ 2.596927] sata_sil 0000:00:11.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 2.597106] scsi0 : sata_sil [ 2.597285] scsi1 : sata_sil [ 2.597528] ata1: SATA max UDMA/100 mmio m512@0xfdffe000 tf 0xfdffe080 irq 23 [ 2.597581] ata2: SATA max UDMA/100 mmio m512@0xfdffe000 tf 0xfdffe0c0 irq 23 [ 2.597714] alloc irq_desc for 21 on node -1 [ 2.597717] alloc kstat_irqs on node -1 [ 2.597725] sata_sil 0000:00:12.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21 [ 2.597860] scsi2 : sata_sil [ 2.597992] scsi3 : sata_sil [ 2.598214] ata3: SATA max UDMA/100 mmio m512@0xfdffd000 tf 0xfdffd080 irq 21 [ 2.598267] ata4: SATA max UDMA/100 mmio m512@0xfdffd000 tf 0xfdffd0c0 irq 21 [ 2.598588] alloc irq_desc for 16 on node -1 [ 2.598591] alloc kstat_irqs on node -1 [ 2.598598] pata_atiixp 0000:00:14.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 2.598796] scsi4 : pata_atiixp [ 2.598923] scsi5 : pata_atiixp [ 2.600541] ata5: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xf400 irq 14 [ 2.600593] ata6: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xf408 irq 15 [ 2.601657] Fixed MDIO Bus: probed [ 2.601764] PPP generic driver version 2.4.2 [ 2.601957] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 2.602032] alloc irq_desc for 19 on node -1 [ 2.602035] alloc kstat_irqs on node -1 [ 2.602042] ehci_hcd 0000:00:13.2: PCI INT A -> GSI 19 (level, low) -> IRQ 19 [ 2.602107] ehci_hcd 0000:00:13.2: EHCI Host Controller [ 2.602223] ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 1 [ 2.602348] ehci_hcd 0000:00:13.2: irq 19, io mem 0xfdffa000 [ 2.612020] ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00 [ 2.612173] usb usb1: configuration #1 chosen from 1 choice [ 2.612263] hub 1-0:1.0: USB hub found [ 2.612322] hub 1-0:1.0: 8 ports detected [ 2.612473] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 2.613019] ohci_hcd 0000:00:13.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19 [ 2.613080] ohci_hcd 0000:00:13.0: OHCI Host Controller [ 2.613172] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 2 [ 2.613245] ohci_hcd 0000:00:13.0: irq 19, io mem 0xfdffc000 [ 2.672090] usb usb2: configuration #1 chosen from 1 choice [ 2.672175] hub 2-0:1.0: USB hub found [ 2.672235] hub 2-0:1.0: 4 ports detected [ 2.672356] ohci_hcd 0000:00:13.1: PCI INT A -> GSI 19 (level, low) -> IRQ 19 [ 2.672416] ohci_hcd 0000:00:13.1: OHCI Host Controller [ 2.672504] ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 3 [ 2.672577] ohci_hcd 0000:00:13.1: irq 19, io mem 0xfdffb000 [ 2.732081] usb usb3: configuration #1 chosen from 1 choice [ 2.732166] hub 3-0:1.0: USB hub found [ 2.732225] hub 3-0:1.0: 4 ports detected [ 2.732364] uhci_hcd: USB Universal Host Controller Interface driver [ 2.732538] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 2.732955] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 2.733012] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 2.733167] mice: PS/2 mouse device common for all mice [ 2.733353] rtc_cmos 00:03: RTC can wake from S4 [ 2.733445] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0 [ 2.733524] rtc0: alarms up to one month, 242 bytes nvram [ 2.733713] device-mapper: uevent: version 1.0.3 [ 2.733885] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com [ 2.734068] device-mapper: multipath: version 1.1.0 loaded [ 2.734118] device-mapper: multipath round-robin: version 1.0.0 loaded [ 2.734332] EISA: Probing bus 0 at eisa.0 [ 2.734402] Cannot allocate resource for EISA slot 4 [ 2.734471] EISA: Detected 0 cards. [ 2.734672] cpuidle: using governor ladder [ 2.734721] cpuidle: using governor menu [ 2.735538] TCP cubic registered [ 2.735759] NET: Registered protocol family 10 [ 2.736538] lo: Disabled Privacy Extensions [ 2.737063] NET: Registered protocol family 17 [ 2.737134] Bluetooth: L2CAP ver 2.13 [ 2.737182] Bluetooth: L2CAP socket layer initialized [ 2.737232] Bluetooth: SCO (Voice Link) ver 0.6 [ 2.737279] Bluetooth: SCO socket layer initialized [ 2.737381] Bluetooth: RFCOMM TTY layer initialized [ 2.737447] Bluetooth: RFCOMM socket layer initialized [ 2.737497] Bluetooth: RFCOMM ver 1.11 [ 2.737590] Using IPI No-Shortcut mode [ 2.737728] PM: Resume from disk failed. [ 2.737746] registered taskstats version 1 [ 2.737939] Magic number: 5:331:254 [ 2.738081] rtc_cmos 00:03: setting system clock to 2009-12-21 00:17:14 UTC (1261354634) [ 2.738138] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 2.738188] EDD information not available. [ 2.751616] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3 [ 2.764751] ata5.00: ATA-6: WDC WD800JB-00JJC0, 05.01C05, max UDMA/100 [ 2.764803] ata5.00: 156301488 sectors, multi 16: LBA [ 2.764888] ata5.00: limited to UDMA/33 due to 40-wire cable [ 2.772724] ata5.00: configured for UDMA/33 [ 2.916033] ata1: SATA link down (SStatus 0 SControl 310) [ 2.916187] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [ 2.925258] ata3.00: ATA-8: WDC WD10EADS-00M2B0, 01.00A01, max UDMA/133 [ 2.925311] ata3.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 0/32) [ 2.933285] ata3.00: configured for UDMA/100 [ 3.236031] ata2: SATA link down (SStatus 0 SControl 310) [ 3.236259] scsi 2:0:0:0: Direct-Access ATA WDC WD10EADS-00M 01.0 PQ: 0 ANSI: 5 [ 3.236534] sd 2:0:0:0: Attached scsi generic sg0 type 0 [ 3.236641] sd 2:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB) [ 3.236767] sd 2:0:0:0: [sda] Write Protect is off [ 3.236817] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 3.236855] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 3.237112] sda: sda1 sda2 < sda5 sda6 sda7 sda8 > [ 3.304716] sd 2:0:0:0: [sda] Attached SCSI disk [ 3.556031] ata4: SATA link down (SStatus 0 SControl 310) [ 3.556204] scsi 4:0:0:0: Direct-Access ATA WDC WD800JB-00JJ 05.0 PQ: 0 ANSI: 5 [ 3.556415] sd 4:0:0:0: [sdb] 156301488 512-byte logical blocks: (80.0 GB/74.5 GiB) [ 3.556423] sd 4:0:0:0: Attached scsi generic sg1 type 0 [ 3.556660] sd 4:0:0:0: [sdb] Write Protect is off [ 3.556710] sd 4:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 3.556747] sd 4:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 3.556988] sdb: sdb1 sdb2 < sdb5 sdb6 sdb7 sdb8 > [ 3.638748] sd 4:0:0:0: [sdb] Attached SCSI disk [ 3.736592] ata6.00: ATAPI: ATAPI DVD A DH20A4P, 9P59, max UDMA/66 [ 3.736675] ata6.00: limited to UDMA/33 due to 40-wire cable [ 3.768558] ata6.00: configured for UDMA/33 [ 3.770404] scsi 5:0:0:0: CD-ROM ATAPI DVD A DH20A4P 9P59 PQ: 0 ANSI: 5 [ 3.775692] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray [ 3.775750] Uniform CD-ROM driver Revision: 3.20 [ 3.775896] sr 5:0:0:0: Attached scsi CD-ROM sr0 [ 3.775969] sr 5:0:0:0: Attached scsi generic sg2 type 5 [ 3.776062] Freeing unused kernel memory: 540k freed [ 3.776739] Write protecting the kernel text: 4568k [ 3.776847] Write protecting the kernel read-only data: 1836k [ 3.958297] Linux agpgart interface v0.103 [ 3.979211] agpgart-ati 0000:00:00.0: unsupported Ati chipset [1002/5a33]) [ 3.997495] FDC 0 is a post-1991 82077 [ 4.064128] [drm] Initialized drm 1.1.0 20060810 [ 4.099187] [drm] radeon default to kernel modesetting DISABLED. [ 4.099688] alloc irq_desc for 17 on node -1 [ 4.099692] alloc kstat_irqs on node -1 [ 4.099703] pci 0000:01:05.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 4.099928] [drm] Initialized radeon 1.31.0 20080528 for 0000:01:05.0 on minor 0 [ 4.105914] <6>8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004) [ 4.106023] 8139cp 0000:02:07.0: This (id 10ec:8139 rev 10) is not an 8139C+ compatible chip, use 8139too [ 4.109590] 8139too Fast Ethernet driver 0.9.28 [ 4.109712] alloc irq_desc for 22 on node -1 [ 4.109716] alloc kstat_irqs on node -1 [ 4.109728] 8139too 0000:02:07.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 [ 4.112389] eth0: RealTek RTL8139 at 0xde00, 00:15:58:21:34:e7, IRQ 22 [ 5.120639] PM: Starting manual resume from disk [ 5.120696] PM: Resume from partition 8:24 [ 5.120698] PM: Checking hibernation image. [ 5.120991] PM: Resume from disk failed. [ 5.142989] EXT4-fs (sdb7): barriers enabled [ 5.159231] kjournald2 starting: pid 368, dev sdb7:8, commit interval 5 seconds [ 5.159314] EXT4-fs (sdb7): delayed allocation enabled [ 5.159439] EXT4-fs: file extents enabled [ 5.160058] EXT4-fs: mballoc enabled [ 5.160124] EXT4-fs (sdb7): mounted filesystem with ordered data mode [ 5.769468] type=1505 audit(1261354637.529:2): operation="profile_load" pid=394 name=/sbin/dhclient3 [ 5.770318] type=1505 audit(1261354637.529:3): operation="profile_load" pid=394 name=/usr/lib/NetworkManager/nm-dhcp-client.action [ 5.770802] type=1505 audit(1261354637.529:4): operation="profile_load" pid=394 name=/usr/lib/connman/scripts/dhclient-script [ 5.812607] type=1505 audit(1261354637.573:5): operation="profile_load" pid=396 name=/usr/lib/cups/backend/cups-pdf [ 5.813581] type=1505 audit(1261354637.573:6): operation="profile_load" pid=396 name=/usr/sbin/cupsd [ 5.817810] type=1505 audit(1261354637.577:7): operation="profile_load" pid=397 name=/usr/sbin/mysqld-akonadi [ 5.821212] type=1505 audit(1261354637.581:8): operation="profile_load" pid=398 name=/usr/sbin/tcpdump [ 7.854273] Adding 2931820k swap on /dev/sdb8. Priority:-1 extents:1 across:2931820k [ 7.856897] udev: starting version 147 [ 8.388292] lp: driver loaded but no devices found [ 8.718888] psmouse serio1: ID: 10 00 64 [ 8.851519] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 8.865983] parport_pc 00:0a: reported by Plug and Play ACPI [ 8.866054] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE] [ 8.960245] lp0: using parport0 (interrupt-driven). [ 9.145800] ppdev: user-space parallel port driver [ 9.239339] input: ImPS/2 Generic Wheel Mouse as /devices/platform/i8042/serio1/input/input4 [ 9.688236] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0x500, revision 0 [ 9.890813] EXT4-fs (sdb7): internal journal on sdb7:8 [ 10.155466] ip_tables: (C) 2000-2006 Netfilter Core Team [ 11.429083] ATI IXP AC97 controller 0000:00:14.5: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 11.806181] eth0: link up, 100Mbps, full-duplex, lpa 0x45E1 [ 14.186515] type=1505 audit(1261334845.945:9): operation="profile_replace" pid=957 name=/sbin/dhclient3 [ 14.187311] type=1505 audit(1261334845.945:10): operation="profile_replace" pid=957 name=/usr/lib/NetworkManager/nm-dhcp-client.action [ 14.187744] type=1505 audit(1261334845.945:11): operation="profile_replace" pid=957 name=/usr/lib/connman/scripts/dhclient-script [ 14.193954] type=1505 audit(1261334845.953:12): operation="profile_replace" pid=960 name=/usr/lib/cups/backend/cups-pdf [ 14.194896] type=1505 audit(1261334845.953:13): operation="profile_replace" pid=960 name=/usr/sbin/cupsd [ 14.208320] type=1505 audit(1261334845.969:14): operation="profile_replace" pid=961 name=/usr/sbin/mysqld-akonadi [ 14.211138] type=1505 audit(1261334845.969:15): operation="profile_replace" pid=962 name=/usr/sbin/tcpdump [ 15.499078] lirc_dev: IR Remote Control driver registered, major 61 Card0.Amixer.info: Card hw:0 'IXP'/'ATI IXP rev 80 with ALC655 at 0xfdff8000, irq 17' Mixer name : 'Realtek ALC655 rev 0' Components : 'AC97a:414c4760' Controls : 41 Simple ctrls : 26 Card0.Amixer.values: Simple mixer control 'Master',0 Capabilities: pvolume pswitch pswitch-joined Playback channels: Front Left - Front Right Limits: Playback 0 - 31 Mono: Front Left: Playback 4 [13%] [-40.50dB] [on] Front Right: Playback 4 [13%] [-40.50dB] [on] Simple mixer control 'Master Mono',0 Capabilities: pvolume pvolume-joined pswitch pswitch-joined Playback channels: Mono Limits: Playback 0 - 31 Mono: Playback 25 [81%] [-9.00dB] [on] Simple mixer control 'PCM',0 Capabilities: pvolume pswitch pswitch-joined Playback channels: Front Left - Front Right Limits: Playback 0 - 31 Mono: Front Left: Playback 25 [81%] [3.00dB] [on] Front Right: Playback 25 [81%] [3.00dB] [on] Simple mixer control 'Surround',0 Capabilities: pvolume pswitch Playback channels: Front Left - Front Right Limits: Playback 0 - 31 Mono: Front Left: Playback 31 [100%] [0.00dB] [off] Front Right: Playback 31 [100%] [0.00dB] [off] Simple mixer control 'Surround Jack Mode',0 Capabilities: enum Items: 'Shared' 'Independent' Item0: 'Shared' Simple mixer control 'Center',0 Capabilities: pvolume pvolume-joined pswitch pswitch-joined Playback channels: Mono Limits: Playback 0 - 31 Mono: Playback 31 [100%] [0.00dB] [off] Simple mixer control 'LFE',0 Capabilities: pvolume pvolume-joined pswitch pswitch-joined Playback channels: Mono Limits: Playback 0 - 31 Mono: Playback 0 [0%] [-46.50dB] [off] Simple mixer control 'Line',0 Capabilities: pvolume pswitch pswitch-joined cswitch cswitch-exclusive Capture exclusive group: 0 Playback channels: Front Left - Front Right Capture channels: Front Left - Front Right Limits: Playback 0 - 31 Front Left: Playback 0 [0%] [-34.50dB] [off] Capture [off] Front Right: Playback 0 [0%] [-34.50dB] [off] Capture [off] Simple mixer control 'CD',0 Capabilities: pvolume pswitch pswitch-joined cswitch cswitch-exclusive Capture exclusive group: 0 Playback channels: Front Left - Front Right Capture channels: Front Left - Front Right Limits: Playback 0 - 31 Front Left: Playback 25 [81%] [3.00dB] [on] Capture [off] Front Right: Playback 25 [81%] [3.00dB] [on] Capture [off] Simple mixer control 'Mic',0 Capabilities: pvolume pvolume-joined pswitch pswitch-joined cswitch cswitch-exclusive Capture exclusive group: 0 Playback channels: Mono Capture channels: Front Left - Front Right Limits: Playback 0 - 31 Mono: Playback 0 [0%] [-34.50dB] [off] Front Left: Capture [on] Front Right: Capture [on] Simple mixer control 'Mic Boost (+20dB)',0 Capabilities: pswitch pswitch-joined Playback channels: Mono Mono: Playback [off] Simple mixer control 'Mic Select',0 Capabilities: enum Items: 'Mic1' 'Mic2' Item0: 'Mic1' Simple mixer control 'Video',0 Capabilities: cswitch cswitch-exclusive Capture exclusive group: 0 Capture channels: Front Left - Front Right Front Left: Capture [off] Front Right: Capture [off] Simple mixer control 'Phone',0 Capabilities: pvolume pvolume-joined pswitch pswitch-joined cswitch cswitch-exclusive Capture exclusive group: 0 Playback channels: Mono Capture channels: Front Left - Front Right Limits: Playback 0 - 31 Mono: Playback 0 [0%] [-34.50dB] [off] Front Left: Capture [off] Front Right: Capture [off] Simple mixer control 'IEC958',0 Capabilities: pswitch pswitch-joined cswitch cswitch-joined Playback channels: Mono Capture channels: Mono Mono: Playback [off] Capture [off] Simple mixer control 'IEC958 Playback AC97-SPSA',0 Capabilities: volume volume-joined Playback channels: Mono Capture channels: Mono Limits: 0 - 3 Mono: 0 [0%] Simple mixer control 'IEC958 Playback Source',0 Capabilities: enum Items: 'PCM' 'Analog In' 'IEC958 In' Item0: 'PCM' Simple mixer control 'PC Speaker',0 Capabilities: pvolume pvolume-joined pswitch pswitch-joined Playback channels: Mono Limits: Playback 0 - 15 Mono: Playback 0 [0%] [-45.00dB] [off] Simple mixer control 'Aux',0 Capabilities: pvolume pswitch pswitch-joined cswitch cswitch-exclusive Capture exclusive group: 0 Playback channels: Front Left - Front Right Capture channels: Front Left - Front Right Limits: Playback 0 - 31 Front Left: Playback 0 [0%] [-34.50dB] [off] Capture [off] Front Right: Playback 0 [0%] [-34.50dB] [off] Capture [off] Simple mixer control 'Mono Output Select',0 Capabilities: enum Items: 'Mix' 'Mic' Item0: 'Mix' Simple mixer control 'Capture',0 Capabilities: cvolume cswitch cswitch-joined Capture channels: Front Left - Front Right Limits: Capture 0 - 15 Front Left: Capture 0 [0%] [0.00dB] [on] Front Right: Capture 0 [0%] [0.00dB] [on] Simple mixer control 'Mix',0 Capabilities: cswitch cswitch-exclusive Capture exclusive group: 0 Capture channels: Front Left - Front Right Front Left: Capture [off] Front Right: Capture [off] Simple mixer control 'Mix Mono',0 Capabilities: cswitch cswitch-exclusive Capture exclusive group: 0 Capture channels: Front Left - Front Right Front Left: Capture [off] Front Right: Capture [off] Simple mixer control 'Channel Mode',0 Capabilities: enum Items: '2ch' '4ch' '6ch' Item0: '2ch' Simple mixer control 'Duplicate Front',0 Capabilities: pswitch pswitch-joined Playback channels: Mono Mono: Playback [off] Simple mixer control 'External Amplifier',0 Capabilities: pswitch pswitch-joined Playback channels: Mono Mono: Playback [on] Card0.Codecs.codec97.0.ac97.0.0: 0-0/0: Realtek ALC655 rev 0 PCI Subsys Vendor: 0x105b PCI Subsys Device: 0x0c81 Flags: 0 Revision : 0x00 Compat. Class : 0x00 Subsys. Vendor ID: 0xffff Subsys. ID : 0xffff Capabilities : DAC resolution : 16-bit ADC resolution : 16-bit 3D enhancement : No 3D Stereo Enhancement Current setup Mic gain : +0dB [+0dB] POP path : pre 3D Sim. stereo : off 3D enhancement : off Loudness : off Mono output : MIX Mic select : Mic1 ADC/DAC loopback : off Extended ID : codec=0 rev=2 LDAC SDAC CDAC DSA=0 SPDIF Extended status : SPCV LDAC SDAC CDAC SPDIF=3/4 SPDIF Control : Consumer PCM Category=0x2 Generation=1 Rate=48kHz Card0.Codecs.codec97.0.ac97.0.0.regs: 0:00 = 0000 0:02 = 1b1b 0:04 = 0000 0:06 = 0006 0:08 = 0000 0:0a = 801e 0:0c = 801f 0:0e = 801f 0:10 = 9f1f 0:12 = 0606 0:14 = 0000 0:16 = 9f1f 0:18 = 0606 0:1a = 0000 0:1c = 0000 0:1e = 0000 0:20 = 0400 0:22 = 0000 0:24 = 0000 0:26 = 000f 0:28 = 09c4 0:2a = 05c0 0:2c = bb80 0:2e = bb80 0:30 = bb80 0:32 = bb80 0:34 = 0000 0:36 = 9f80 0:38 = 8080 0:3a = 2824 0:3c = 0000 0:3e = 0000 0:40 = 0000 0:42 = 0000 0:44 = 0000 0:46 = 0000 0:48 = 0000 0:4a = 0000 0:4c = 0000 0:4e = 0000 0:50 = 0000 0:52 = 0000 0:54 = 0000 0:56 = 0000 0:58 = 0000 0:5a = 0000 0:5c = 0000 0:5e = 0000 0:60 = 0000 0:62 = 0000 0:64 = 0808 0:66 = 0808 0:68 = 0aea 0:6a = 8000 0:6c = 0000 0:6e = 0025 0:70 = 81e0 0:72 = 22e8 0:74 = 8000 0:76 = 0000 0:78 = 0002 0:7a = a092 0:7c = 414c 0:7e = 4760 CurrentDmesg: [ 16.484026] lirc_serial: auto-detected active high receiver [ 16.484034] lirc_dev: lirc_register_driver: sample_rate: 0 [ 16.484138] lirc_serial $Revision: 5.104 $ registered [ 19.379044] [drm] Setting GART location based on new memory map [ 19.379707] [drm] Loading R300 Microcode [ 19.379742] [drm] Num pipes: 2 [ 19.379750] [drm] writeback test succeeded in 1 usecs [ 21.501123] CPU0 attaching NULL sched-domain. [ 21.501132] CPU1 attaching NULL sched-domain. [ 21.512081] CPU0 attaching sched-domain: [ 21.512088] domain 0: span 0-1 level MC [ 21.512092] groups: 0 1 [ 21.512099] domain 1: span 0-1 level CPU [ 21.512102] groups: 0-1 (__cpu_power = 2048) [ 21.512110] CPU1 attaching sched-domain: [ 21.512113] domain 0: span 0-1 level MC [ 21.512116] groups: 1 0 [ 21.512122] domain 1: span 0-1 level CPU [ 21.512125] groups: 0-1 (__cpu_power = 2048) [ 21.912013] eth0: no IPv6 routers present [ 35.658292] CPU0 attaching NULL sched-domain. [ 35.658301] CPU1 attaching NULL sched-domain. [ 35.672590] CPU0 attaching sched-domain: [ 35.672596] domain 0: span 0-1 level CPU [ 35.672600] groups: 0 1 [ 35.672608] CPU1 attaching sched-domain: [ 35.672611] domain 0: span 0-1 level CPU [ 35.672614] groups: 1 0 Date: Mon Dec 21 01:34:44 2009 Dependencies: adduser 3.110ubuntu7 base-files 5.0.0ubuntu7 base-passwd 3.5.21 busybox-initramfs 1:1.13.3-1ubuntu7 coreutils 7.4-2ubuntu1 cpio 2.10-1ubuntu1 debconf 1.5.27ubuntu2 debconf-i18n 1.5.27ubuntu2 debianutils 2.30ubuntu3 dpkg 1.15.4ubuntu2 findutils 4.4.2-1 gcc-4.4-base 4.4.1-4ubuntu8 initramfs-tools 0.92bubuntu53 klibc-utils 1.5.15-1ubuntu2 libacl1 2.2.47-2 libattr1 1:2.4.43-3 libblkid1 2.16-1ubuntu5 libc-bin 2.10.1-0ubuntu15 libc6 2.10.1-0ubuntu15 libdb4.7 4.7.25-7ubuntu2 libgcc1 1:4.4.1-4ubuntu8 libglib2.0-0 2.22.2-0ubuntu1 libklibc 1.5.15-1ubuntu2 liblocale-gettext-perl 1.05-4build1 libncurses5 5.7+20090803-2ubuntu2 libpam-modules 1.1.0-2ubuntu1 libpam-runtime 1.1.0-2ubuntu1 libpam0g 1.1.0-2ubuntu1 libpcre3 7.8-3 libselinux1 2.0.85-2ubuntu2 libslang2 2.1.4-3 libstdc++6 4.4.1-4ubuntu8 libtext-charwidth-perl 0.04-5build1 libtext-iconv-perl 1.7-1build1 libtext-wrapi18n-perl 0.06-7 libusb-0.1-4 2:0.1.12-13 libuuid1 2.16-1ubuntu5 linux-sound-base 1.0.20+dfsg-1ubuntu5 lsb-base 4.0-0ubuntu5 lsof 4.81.dfsg.1-1 lzma 4.43-14ubuntu1 module-init-tools 3.10-3 ncurses-bin 5.7+20090803-2ubuntu2 passwd 1:4.1.4.1-1ubuntu2 perl-base 5.10.0-24ubuntu4 procps 1:3.2.8-1ubuntu3 sed 4.2.1-1 tzdata 2009s-0ubuntu0.9.10 udev 147~-6.1 util-linux 2.16-1ubuntu5 zlib1g 1:1.2.3.3.dfsg-13ubuntu3 DistroRelease: Ubuntu 9.10 InstallationMedia: Kubuntu 9.10 "Karmic Koala" - Release i386 (20091028.5) Package: alsa-base 1.0.20+dfsg-1ubuntu5 PackageArchitecture: all PciMultimedia: 00:14.5 Multimedia audio controller [0401]: ATI Technologies Inc IXP SB400 AC'97 Audio Controller [1002:4370] (rev 80) Subsystem: Foxconn International, Inc. Device [105b:0c81] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- SERR- Kernel driver in use: ATI IXP AC97 controller Kernel modules: snd-atiixp ProcEnviron: SHELL=/bin/bash PATH=(custom, no user) LANG=en_IN LANGUAGE= ProcVersionSignature: Ubuntu 2.6.31-16.53-generic SourcePackage: alsa-driver Uname: Linux 2.6.31-16-generic i686