, disabled. [ 0.481032] ACPI: PCI Interrupt Link [LNKD] (IRQs 16 17 18 19) *0, disabled. [ 0.481268] ACPI: PCI Interrupt Link [LNEA] (IRQs 16 17 18 19) *0, disabled. [ 0.481504] ACPI: PCI Interrupt Link [LNEB] (IRQs 16 17 18 19) *0, disabled. [ 0.481740] ACPI: PCI Interrupt Link [LNEC] (IRQs 16 17 18 19) *0, disabled. [ 0.481974] ACPI: PCI Interrupt Link [LNED] (IRQs 16 17 18 19) *0, disabled. [ 0.482215] ACPI: PCI Interrupt Link [LUB0] (IRQs 20 21 22 23) *10 [ 0.482455] ACPI: PCI Interrupt Link [LUB2] (IRQs 20 21 22 23) *11 [ 0.482694] ACPI: PCI Interrupt Link [LMAC] (IRQs 20 21 22 23) *7 [ 0.482932] ACPI: PCI Interrupt Link [LAZA] (IRQs 20 21 22 23) *7 [ 0.483171] ACPI: PCI Interrupt Link [SGRU] (IRQs 20 21 22 23) *10 [ 0.483414] ACPI: PCI Interrupt Link [LSMB] (IRQs 20 21 22 23) *11 [ 0.483655] ACPI: PCI Interrupt Link [LPMU] (IRQs 20 21 22 23) *7 [ 0.483900] ACPI: PCI Interrupt Link [LSA0] (IRQs 20 21 22 23) *5 [ 0.484189] ACPI: PCI Interrupt Link [LATA] (IRQs 20 21 22 23) *0, disabled. [ 0.484308] ACPI Warning (tbutils-0217): Incorrect checksum in table [OEMB] - E6, should be E5 [20080926] [ 0.484333] ACPI: WMI: Mapper loaded [ 0.484383] SCSI subsystem initialized [ 0.484383] libata version 3.00 loaded. [ 0.484383] usbcore: registered new interface driver usbfs [ 0.484383] usbcore: registered new interface driver hub [ 0.484383] usbcore: registered new device driver usb [ 0.484383] PCI: Using ACPI for IRQ routing [ 0.492013] Bluetooth: Core ver 2.13 [ 0.492039] NET: Registered protocol family 31 [ 0.492039] Bluetooth: HCI device and connection manager initialized [ 0.492039] Bluetooth: HCI socket layer initialized [ 0.492039] NET: Registered protocol family 8 [ 0.492039] NET: Registered protocol family 20 [ 0.492055] NetLabel: Initializing [ 0.492056] NetLabel: domain hash size = 128 [ 0.492058] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.492071] NetLabel: unlabeled traffic allowed by default [ 0.492145] AppArmor: AppArmor Filesystem Enabled [ 0.496016] pnp: PnP ACPI init [ 0.496031] ACPI: bus type pnp registered [ 0.500443] pnp: PnP ACPI: found 13 devices [ 0.500446] ACPI: ACPI bus type pnp unregistered [ 0.500449] PnPBIOS: Disabled by ACPI PNP [ 0.500462] system 00:05: ioport range 0x4d0-0x4d1 has been reserved [ 0.500464] system 00:05: ioport range 0x800-0x80f has been reserved [ 0.500467] system 00:05: ioport range 0x4000-0x407f has been reserved [ 0.500470] system 00:05: ioport range 0x4080-0x40ff has been reserved [ 0.500472] system 00:05: ioport range 0x4400-0x447f has been reserved [ 0.500475] system 00:05: ioport range 0x4480-0x44ff has been reserved [ 0.500477] system 00:05: ioport range 0x4800-0x487f has been reserved [ 0.500480] system 00:05: ioport range 0x4880-0x48ff has been reserved [ 0.500483] system 00:05: iomem range 0xfed02000-0xfed03fff has been reserved [ 0.500486] system 00:05: iomem range 0xfed04000-0xfed04fff has been reserved [ 0.500489] system 00:05: iomem range 0xfee01000-0xfeefffff has been reserved [ 0.500492] system 00:05: iomem range 0xfed01000-0xfed01fff has been reserved [ 0.500498] system 00:07: iomem range 0xfec00000-0xfec00fff has been reserved [ 0.500503] system 00:07: iomem range 0xfee00000-0xfee00fff has been reserved [ 0.500510] system 00:0a: ioport range 0xa00-0xadf has been reserved [ 0.500513] system 00:0a: ioport range 0xae0-0xaef has been reserved [ 0.500518] system 00:0b: iomem range 0xe0000000-0xefffffff has been reserved [ 0.500524] system 00:0c: iomem range 0x0-0x9ffff could not be reserved [ 0.500527] system 00:0c: iomem range 0xc0000-0xcffff could not be reserved [ 0.500530] system 00:0c: iomem range 0xe0000-0xfffff could not be reserved [ 0.500532] system 00:0c: iomem range 0x100000-0x8fffffff could not be reserved [ 0.500535] system 00:0c: iomem range 0xfed45000-0xffffffff could not be reserved [ 0.535244] pci 0000:00:0a.0: PCI bridge, secondary bus 0000:01 [ 0.535247] pci 0000:00:0a.0: IO window: disabled [ 0.535251] pci 0000:00:0a.0: MEM window: disabled [ 0.535255] pci 0000:00:0a.0: PREFETCH window: disabled [ 0.535260] pci 0000:00:0b.0: PCI bridge, secondary bus 0000:02 [ 0.535262] pci 0000:00:0b.0: IO window: disabled [ 0.535266] pci 0000:00:0b.0: MEM window: disabled [ 0.535269] pci 0000:00:0b.0: PREFETCH window: disabled [ 0.535274] pci 0000:00:0c.0: PCI bridge, secondary bus 0000:03 [ 0.535276] pci 0000:00:0c.0: IO window: disabled [ 0.535279] pci 0000:00:0c.0: MEM window: disabled [ 0.535282] pci 0000:00:0c.0: PREFETCH window: disabled [ 0.535287] pci 0000:00:0d.0: PCI bridge, secondary bus 0000:04 [ 0.535289] pci 0000:00:0d.0: IO window: disabled [ 0.535293] pci 0000:00:0d.0: MEM window: disabled [ 0.535296] pci 0000:00:0d.0: PREFETCH window: disabled [ 0.535306] pci 0000:00:0a.0: setting latency timer to 64 [ 0.535312] pci 0000:00:0b.0: setting latency timer to 64 [ 0.535319] pci 0000:00:0c.0: setting latency timer to 64 [ 0.535325] pci 0000:00:0d.0: setting latency timer to 64 [ 0.535328] bus: 00 index 0 io port: [0x00-0xffff] [ 0.535330] bus: 00 index 1 mmio: [0x000000-0xffffffff] [ 0.535333] bus: 01 index 0 mmio: [0x0-0x0] [ 0.535334] bus: 01 index 1 mmio: [0x0-0x0] [ 0.535336] bus: 01 index 2 mmio: [0x0-0x0] [ 0.535338] bus: 01 index 3 io port: [0x00-0xffff] [ 0.535340] bus: 01 index 4 mmio: [0x000000-0xffffffff] [ 0.535342] bus: 02 index 0 mmio: [0x0-0x0] [ 0.535344] bus: 02 index 1 mmio: [0x0-0x0] [ 0.535345] bus: 02 index 2 mmio: [0x0-0x0] [ 0.535347] bus: 02 index 3 mmio: [0x0-0x0] [ 0.535349] bus: 03 index 0 mmio: [0x0-0x0] [ 0.535351] bus: 03 index 1 mmio: [0x0-0x0] [ 0.535352] bus: 03 index 2 mmio: [0x0-0x0] [ 0.535354] bus: 03 index 3 mmio: [0x0-0x0] [ 0.535356] bus: 04 index 0 mmio: [0x0-0x0] [ 0.535357] bus: 04 index 1 mmio: [0x0-0x0] [ 0.535359] bus: 04 index 2 mmio: [0x0-0x0] [ 0.535361] bus: 04 index 3 mmio: [0x0-0x0] [ 0.535369] NET: Registered protocol family 2 [ 0.548158] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.548451] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.549004] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 0.549339] TCP: Hash tables configured (established 131072 bind 65536) [ 0.549342] TCP reno registered [ 0.556256] NET: Registered protocol family 1 [ 0.556377] checking if image is initramfs... it is [ 1.032488] Switched to high resolution mode on CPU 1 [ 1.036122] Switched to high resolution mode on CPU 0 [ 1.155056] Freeing initrd memory: 7324k freed [ 1.155306] cpufreq: No nForce2 chipset. [ 1.155446] audit: initializing netlink socket (disabled) [ 1.155473] type=2000 audit(1260917537.152:1): initialized [ 1.162518] highmem bounce pool size: 64 pages [ 1.162523] HugeTLB registered 4 MB page size, pre-allocated 0 pages [ 1.163816] VFS: Disk quotas dquot_6.5.1 [ 1.163875] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 1.164462] fuse init (API version 7.10) [ 1.164551] msgmni has been set to 1693 [ 1.164725] alg: No test for stdrng (krng) [ 1.164735] io scheduler noop registered [ 1.164737] io scheduler anticipatory registered [ 1.164740] io scheduler deadline registered [ 1.164754] io scheduler cfq registered (default) [ 1.187096] pci 0000:00:10.0: Boot video device [ 1.192009] pcieport-driver 0000:00:0b.0: setting latency timer to 64 [ 1.192047] pcieport-driver 0000:00:0b.0: found MSI capability [ 1.192072] pcieport-driver 0000:00:0b.0: irq 2303 for MSI/MSI-X [ 1.192083] pci_express 0000:00:0b.0:pcie00: allocate port service [ 1.192097] pci_express 0000:00:0b.0:pcie03: allocate port service [ 1.192149] pcieport-driver 0000:00:0c.0: setting latency timer to 64 [ 1.192185] pcieport-driver 0000:00:0c.0: found MSI capability [ 1.192207] pcieport-driver 0000:00:0c.0: irq 2302 for MSI/MSI-X [ 1.192216] pci_express 0000:00:0c.0:pcie00: allocate port service [ 1.192228] pci_express 0000:00:0c.0:pcie03: allocate port service [ 1.192277] pcieport-driver 0000:00:0d.0: setting latency timer to 64 [ 1.192313] pcieport-driver 0000:00:0d.0: found MSI capability [ 1.192335] pcieport-driver 0000:00:0d.0: irq 2301 for MSI/MSI-X [ 1.192345] pci_express 0000:00:0d.0:pcie00: allocate port service [ 1.192356] pci_express 0000:00:0d.0:pcie03: allocate port service [ 1.192413] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 1.192422] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 1.192572] input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0 [ 1.192575] ACPI: Power Button (FF) [PWRF] [ 1.192625] input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1 [ 1.192628] ACPI: Power Button (CM) [PWRB] [ 1.192886] processor ACPI_CPU:00: registered as cooling_device0 [ 1.192890] ACPI: Processor [P001] (supports 8 throttling states) [ 1.192927] processor ACPI_CPU:01: registered as cooling_device1 [ 1.196398] isapnp: Scanning for PnP cards... [ 1.549322] isapnp: No Plug & Play device found [ 1.560189] Serial: 8250/16550 driver4 ports, IRQ sharing enabled [ 1.560284] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 1.560577] 00:04: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 1.561404] brd: module loaded [ 1.561704] loop: module loaded [ 1.561772] Fixed MDIO Bus: probed [ 1.561777] PPP generic driver version 2.4.2 [ 1.561832] input: Macintosh mouse button emulation as /devices/virtual/input/input2 [ 1.561860] Driver 'sd' needs updating - please use bus_type methods [ 1.561869] Driver 'sr' needs updating - please use bus_type methods [ 1.561909] ahci 0000:00:0e.0: version 3.0 [ 1.562264] ACPI: PCI Interrupt Link [LSA0] enabled at IRQ 23 [ 1.562272] ahci 0000:00:0e.0: PCI INT A -> Link[LSA0] -> GSI 23 (level, low) -> IRQ 23 [ 1.562324] ahci 0000:00:0e.0: irq 2300 for MSI/MSI-X [ 1.562380] ahci 0000:00:0e.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl IDE mode [ 1.562383] ahci 0000:00:0e.0: flags: 64bit sntf led clo pmp pio [ 1.562387] ahci 0000:00:0e.0: setting latency timer to 64 [ 1.562822] scsi0 : ahci [ 1.562944] scsi1 : ahci [ 1.563002] scsi2 : ahci [ 1.563057] scsi3 : ahci [ 1.563150] ata1: SATA max UDMA/133 abar m8192@0xfeb7c000 port 0xfeb7c100 irq 2300 [ 1.563153] ata2: SATA max UDMA/133 abar m8192@0xfeb7c000 port 0xfeb7c180 irq 2300 [ 1.563155] ata3: SATA max UDMA/133 abar m8192@0xfeb7c000 port 0xfeb7c200 irq 2300 [ 1.563158] ata4: SATA max UDMA/133 abar m8192@0xfeb7c000 port 0xfeb7c280 irq 2300 [ 1.880025] ata1: SATA link down (SStatus 0 SControl 300) [ 2.364019] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2.364416] ata2.00: ATA-7: FUJITSU MHW2120BH, 8918, max UDMA/100 [ 2.364421] ata2.00: 234441648 sectors, multi 16: LBA48 [ 2.364953] ata2.00: configured for UDMA/100 [ 2.684024] ata3: SATA link down (SStatus 0 SControl 300) [ 3.004024] ata4: SATA link down (SStatus 0 SControl 300) [ 3.004166] scsi 1:0:0:0: Direct-Access ATA FUJITSU MHW2120B 8918 PQ: 0 ANSI: 5 [ 3.004260] sd 1:0:0:0: [sda] 234441648 512-byte hardware sectors: (120 GB/111 GiB) [ 3.004276] sd 1:0:0:0: [sda] Write Protect is off [ 3.004279] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 3.004303] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 3.004369] sd 1:0:0:0: [sda] 234441648 512-byte hardware sectors: (120 GB/111 GiB) [ 3.004383] sd 1:0:0:0: [sda] Write Protect is off [ 3.004385] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 3.004409] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 3.004412] sda: sda1 [ 3.321101] sd 1:0:0:0: [sda] Attached SCSI disk [ 3.321152] sd 1:0:0:0: Attached scsi generic sg0 type 0 [ 3.321398] pata_amd 0000:00:08.0: version 0.3.10 [ 3.321454] pata_amd 0000:00:08.0: setting latency timer to 64 [ 3.321541] scsi4 : pata_amd [ 3.321597] scsi5 : pata_amd [ 3.322927] ata5: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14 [ 3.322930] ata6: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15 [ 3.492305] ata5.00: ATAPI: LITEON DVD-ROM LTD163, GH4W, max UDMA/33 [ 3.492449] ata5.01: ATA-7: SAMSUNG SV1203N, TQ100-23, max UDMA/133 [ 3.492453] ata5.01: 234493056 sectors, multi 16: LBA48 [ 3.492494] ata5: nv_mode_filter: 0x739f&0x701f->0x701f, BIOS=0x7000 (0xc0c70000) ACPI=0x701f (60:15:0x15) [ 3.492501] ata5: nv_mode_filter: 0x7f39f&0x7f01f->0x7f01f, BIOS=0x7f000 (0xc0c70000) ACPI=0x7f01f (60:15:0x15) [ 3.500271] ata5.00: configured for UDMA/33 [ 3.508369] ata5.01: configured for UDMA/133 [ 3.508604] ata6: port disabled. ignoring. [ 3.508883] scsi 4:0:0:0: CD-ROM LITEON DVD-ROM LTD163 GH4W PQ: 0 ANSI: 5 [ 3.510516] sr0: scsi3-mmc drive: 0x/48x cd/rw xa/form2 cdda tray [ 3.510520] Uniform CD-ROM driver Revision: 3.20 [ 3.510654] sr 4:0:0:0: Attached scsi CD-ROM sr0 [ 3.510695] sr 4:0:0:0: Attached scsi generic sg1 type 5 [ 3.510763] scsi 4:0:1:0: Direct-Access ATA SAMSUNG SV1203N TQ10 PQ: 0 ANSI: 5 [ 3.510846] sd 4:0:1:0: [sdb] 234493056 512-byte hardware sectors: (120 GB/111 GiB) [ 3.510861] sd 4:0:1:0: [sdb] Write Protect is off [ 3.510864] sd 4:0:1:0: [sdb] Mode Sense: 00 3a 00 00 [ 3.510888] sd 4:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 3.510939] sd 4:0:1:0: [sdb] 234493056 512-byte hardware sectors: (120 GB/111 GiB) [ 3.510953] sd 4:0:1:0: [sdb] Write Protect is off [ 3.510955] sd 4:0:1:0: [sdb] Mode Sense: 00 3a 00 00 [ 3.510979] sd 4:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 3.510983] sdb: sdb1 [ 3.516782] sd 4:0:1:0: [sdb] Attached SCSI disk [ 3.516818] sd 4:0:1:0: Attached scsi generic sg2 type 0 [ 3.517315] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 3.517688] ACPI: PCI Interrupt Link [LUB2] enabled at IRQ 22 [ 3.517696] ehci_hcd 0000:00:04.1: PCI INT B -> Link[LUB2] -> GSI 22 (level, low) -> IRQ 22 [ 3.517716] ehci_hcd 0000:00:04.1: setting latency timer to 64 [ 3.517719] ehci_hcd 0000:00:04.1: EHCI Host Controller [ 3.517783] ehci_hcd 0000:00:04.1: new USB bus registered, assigned bus number 1 [ 3.517807] ehci_hcd 0000:00:04.1: debug port 1 [ 3.517812] ehci_hcd 0000:00:04.1: cache line size of 32 is not supported [ 3.517828] ehci_hcd 0000:00:04.1: irq 22, io mem 0xfeb7ec00 [ 3.528022] ehci_hcd 0000:00:04.1: USB 2.0 started, EHCI 1.00 [ 3.528131] usb usb1: configuration #1 chosen from 1 choice [ 3.528156] hub 1-0:1.0: USB hub found [ 3.528163] hub 1-0:1.0: 8 ports detected [ 3.528263] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 3.528618] ACPI: PCI Interrupt Link [LUB0] enabled at IRQ 21 [ 3.528623] ohci_hcd 0000:00:04.0: PCI INT A -> Link[LUB0] -> GSI 21 (level, low) -> IRQ 21 [ 3.528634] ohci_hcd 0000:00:04.0: setting latency timer to 64 [ 3.528637] ohci_hcd 0000:00:04.0: OHCI Host Controller [ 3.528679] ohci_hcd 0000:00:04.0: new USB bus registered, assigned bus number 2 [ 3.528698] ohci_hcd 0000:00:04.0: irq 21, io mem 0xfeb7f000 [ 3.586070] usb usb2: configuration #1 chosen from 1 choice [ 3.586094] hub 2-0:1.0: USB hub found [ 3.586102] hub 2-0:1.0: 8 ports detected [ 3.586191] uhci_hcd: USB Universal Host Controller Interface driver [ 3.586279] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12 [ 3.588201] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 3.588206] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 3.592074] mice: PS/2 mouse device common for all mice [ 3.604117] rtc_cmos 00:06: RTC can wake from S4 [ 3.604162] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0 [ 3.604194] rtc0: alarms up to one year, y3k, 114 bytes nvram [ 3.604250] device-mapper: uevent: version 1.0.3 [ 3.604341] device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@redhat.com [ 3.604406] device-mapper: multipath: version 1.0.5 loaded [ 3.604409] device-mapper: multipath round-robin: version 1.0.0 loaded [ 3.604482] EISA: Probing bus 0 at eisa.0 [ 3.604496] Cannot allocate resource for EISA slot 4 [ 3.604509] EISA: Detected 0 cards. [ 3.604557] cpuidle: using governor ladder [ 3.604558] cpuidle: using governor menu [ 3.605057] TCP cubic registered [ 3.605155] NET: Registered protocol family 10 [ 3.605580] lo: Disabled Privacy Extensions [ 3.605902] NET: Registered protocol family 17 [ 3.605918] Bluetooth: L2CAP ver 2.11 [ 3.605920] Bluetooth: L2CAP socket layer initialized [ 3.605923] Bluetooth: SCO (Voice Link) ver 0.6 [ 3.605924] Bluetooth: SCO socket layer initialized [ 3.605958] Bluetooth: RFCOMM socket layer initialized [ 3.605965] Bluetooth: RFCOMM TTY layer initialized [ 3.605967] Bluetooth: RFCOMM ver 1.10 [ 3.606018] Using IPI No-Shortcut mode [ 3.606092] registered taskstats version 1 [ 3.606223] Magic number: 5:837:906 [ 3.606302] rtc_cmos 00:06: setting system clock to 2009-12-15 22:52:20 UTC (1260917540) [ 3.606305] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 3.606307] EDD information not available. [ 3.606598] Freeing unused kernel memory: 532k freed [ 3.606722] Write protecting the kernel text: 4120k [ 3.606766] Write protecting the kernel read-only data: 1524k [ 3.629662] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3 [ 3.891919] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.61. [ 3.892332] ACPI: PCI Interrupt Link [LMAC] enabled at IRQ 20 [ 3.892346] forcedeth 0000:00:0f.0: PCI INT A -> Link[LMAC] -> GSI 20 (level, low) -> IRQ 20 [ 3.892351] forcedeth 0000:00:0f.0: setting latency timer to 64 [ 3.924251] ata2.00: exception Emask 0x10 SAct 0x0 SErr 0x380000 action 0x6 frozen [ 3.924256] ata2.00: irq_stat 0x08000000, interface fatal error [ 3.924259] ata2: SError: { 10B8B Dispar BadCRC } [ 3.924264] ata2.00: cmd c8/00:18:08:00:00/00:00:00:00:00/e0 tag 0 dma 12288 in [ 3.924266] res 50/00:00:07:00:00/00:00:00:00:00/e0 Emask 0x10 (ATA bus error) [ 3.924268] ata2.00: status: { DRDY } [ 3.924274] ata2: hard resetting link [ 3.980541] usb 1-5: new high speed USB device using ehci_hcd and address 3 [ 4.114703] usb 1-5: configuration #1 chosen from 1 choice [ 4.119776] Initializing USB Mass Storage driver... [ 4.119959] scsi6 : SCSI emulation for USB Mass Storage devices [ 4.120116] usbcore: registered new interface driver usb-storage [ 4.120119] USB Mass Storage support registered. [ 4.120415] usb-storage: device found at 3 [ 4.120418] usb-storage: waiting for device to settle before scanning [ 4.224528] usb 1-8: new high speed USB device using ehci_hcd and address 4 [ 4.358820] usb 1-8: configuration #1 chosen from 1 choice [ 4.359050] scsi7 : SCSI emulation for USB Mass Storage devices [ 4.359858] usb-storage: device found at 4 [ 4.359861] usb-storage: waiting for device to settle before scanning [ 4.408043] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 4.408993] ata2.00: configured for UDMA/100 [ 4.409010] ata2: EH complete [ 4.413576] forcedeth 0000:00:0f.0: ifname eth0, PHY OUI 0x732 @ 1, addr 00:1d:92:b4:02:68 [ 4.413580] forcedeth 0000:00:0f.0: highdma pwrctl mgmt timirq lnktim msi desc-v3 [ 4.432466] ata2.00: exception Emask 0x10 SAct 0x0 SErr 0x300000 action 0x6 frozen [ 4.432472] ata2.00: irq_stat 0x08000000, interface fatal error [ 4.432477] ata2: SError: { Dispar BadCRC } [ 4.432485] ata2.00: cmd c8/00:18:08:00:00/00:00:00:00:00/e0 tag 0 dma 12288 in [ 4.432487] res 50/00:45:00:00:00/00:00:00:00:00/a0 Emask 0x10 (ATA bus error) [ 4.432492] ata2.00: status: { DRDY } [ 4.432500] ata2: hard resetting link [ 4.660027] usb 2-4: new full speed USB device using ohci_hcd and address 2 [ 4.870119] usb 2-4: configuration #1 chosen from 1 choice [ 4.880349] usbcore: registered new interface driver hiddev [ 4.888101] input: USB AUDIO as /devices/pci0000:00/0000:00:04.0/usb2/2-4/2-4:1.2/input/input4 [ 4.891240] generic-usb 0003:1130:1620.0001: input,hidraw0: USB HID v1.10 Device [USB AUDIO ] on usb-0000:00:04.0-4/input2 [ 4.891259] usbcore: registered new interface driver usbhid [ 4.891263] usbhid: v2.6:USB HID core driver [ 4.916033] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 4.916966] ata2.00: configured for UDMA/100 [ 4.916987] ata2: EH complete [ 4.943655] ata2.00: exception Emask 0x10 SAct 0x0 SErr 0x380000 action 0x6 frozen [ 4.943661] ata2.00: irq_stat 0x08000000, interface fatal error [ 4.943665] ata2: SError: { 10B8B Dispar BadCRC } [ 4.943673] ata2.00: cmd c8/00:18:08:00:00/00:00:00:00:00/e0 tag 0 dma 12288 in [ 4.943675] res 50/00:45:00:00:00/00:00:00:00:00/a0 Emask 0x10 (ATA bus error) [ 4.943680] ata2.00: status: { DRDY } [ 4.943687] ata2: hard resetting link [ 5.424025] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 5.424915] ata2.00: configured for UDMA/100 [ 5.424929] ata2: EH complete [ 5.454852] ata2: limiting SATA link speed to 1.5 Gbps [ 5.454858] ata2.00: exception Emask 0x10 SAct 0x0 SErr 0x180000 action 0x6 frozen [ 5.454863] ata2.00: irq_stat 0x08000000, interface fatal error [ 5.454867] ata2: SError: { 10B8B Dispar } [ 5.454875] ata2.00: cmd c8/00:18:08:00:00/00:00:00:00:00/e0 tag 0 dma 12288 in [ 5.454877] res 50/00:45:00:00:00/00:00:00:00:00/a0 Emask 0x10 (ATA bus error) [ 5.454881] ata2.00: status: { DRDY } [ 5.454888] ata2: hard resetting link [ 5.992029] ata2: SATA link up (SStatus 103 SControl 310) [ 5.992918] ata2.00: configured for UDMA/100 [ 5.992931] ata2: EH complete [ 6.021626] ata2.00: exception Emask 0x10 SAct 0x0 SErr 0x380000 action 0x6 frozen [ 6.021631] ata2.00: irq_stat 0x08000000, interface fatal error [ 6.021636] ata2: SError: { 10B8B Dispar BadCRC } [ 6.021643] ata2.00: cmd c8/00:18:08:00:00/00:00:00:00:00/e0 tag 0 dma 12288 in [ 6.021645] res 50/00:45:00:00:00/00:00:00:00:00/a0 Emask 0x10 (ATA bus error) [ 6.021650] ata2.00: status: { DRDY } [ 6.021656] ata2: hard resetting link [ 6.504038] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [ 6.504981] ata2.00: configured for UDMA/100 [ 6.504994] ata2: EH complete [ 6.565551] sd 1:0:0:0: [sda] 234441648 512-byte hardware sectors: (120 GB/111 GiB) [ 6.568942] ata2.00: exception Emask 0x10 SAct 0x0 SErr 0x180000 action 0x6 frozen [ 6.568947] ata2.00: irq_stat 0x08000000, interface fatal error [ 6.568952] ata2: SError: { 10B8B Dispar } [ 6.568960] ata2.00: cmd c8/00:08:a0:4b:f9/00:00:00:00:00/ed tag 0 dma 4096 in [ 6.568962] res 50/00:00:07:4b:f9/00:00:00:00:00/ed Emask 0x10 (ATA bus error) [ 6.568967] ata2.00: status: { DRDY } [ 6.568973] ata2: hard resetting link [ 7.052029] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [ 7.052917] ata2.00: configured for UDMA/100 [ 7.052931] ata2: EH complete [ 7.080130] ata2.00: exception Emask 0x10 SAct 0x0 SErr 0x180000 action 0x6 frozen [ 7.080135] ata2.00: irq_stat 0x08000000, interface fatal error [ 7.080139] ata2: SError: { 10B8B Dispar } [ 7.080147] ata2.00: cmd c8/00:08:a0:4b:f9/00:00:00:00:00/ed tag 0 dma 4096 in [ 7.080148] res 50/00:45:00:00:00/00:00:00:00:00/a0 Emask 0x10 (ATA bus error) [ 7.080153] ata2.00: status: { DRDY } [ 7.080159] ata2: hard resetting link [ 7.564029] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [ 7.564919] ata2.00: configured for UDMA/100 [ 7.564932] ata2: EH complete [ 7.602445] ata2.00: limiting speed to UDMA/66:PIO4 [ 7.602451] ata2.00: exception Emask 0x10 SAct 0x0 SErr 0x180000 action 0x6 frozen [ 7.602455] ata2.00: irq_stat 0x08000000, interface fatal error [ 7.602460] ata2: SError: { 10B8B Dispar } [ 7.602467] ata2.00: cmd c8/00:08:a0:4b:f9/00:00:00:00:00/ed tag 0 dma 4096 in [ 7.602469] res 50/00:45:00:00:00/00:00:00:00:00/a0 Emask 0x10 (ATA bus error) [ 7.602473] ata2.00: status: { DRDY } [ 7.602480] ata2: hard resetting link [ 8.084027] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [ 9.120217] usb-storage: device scan complete [ 9.121969] scsi 6:0:0:0: Direct-Access ST340810 A PQ: 0 ANSI: 2 CCS [ 9.123090] sd 6:0:0:0: [sdc] 78165360 512-byte hardware sectors: (40.0 GB/37.2 GiB) [ 9.124823] sd 6:0:0:0: [sdc] Write Protect is off [ 9.124827] sd 6:0:0:0: [sdc] Mode Sense: 00 38 00 00 [ 9.124832] sd 6:0:0:0: [sdc] Assuming drive cache: write through [ 9.125565] sd 6:0:0:0: [sdc] 78165360 512-byte hardware sectors: (40.0 GB/37.2 GiB) [ 9.126810] sd 6:0:0:0: [sdc] Write Protect is off [ 9.126814] sd 6:0:0:0: [sdc] Mode Sense: 00 38 00 00 [ 9.126818] sd 6:0:0:0: [sdc] Assuming drive cache: write through [ 9.126823] sdc: sdc1 sdc2 < sdc5 > [ 9.146030] sd 6:0:0:0: [sdc] Attached SCSI disk [ 9.146095] sd 6:0:0:0: Attached scsi generic sg3 type 0 [ 9.356843] usb-storage: device scan complete [ 9.358949] scsi 7:0:0:0: Direct-Access Generic USB SD Reader 1.00 PQ: 0 ANSI: 0 [ 9.359576] scsi 7:0:0:1: Direct-Access Generic USB CF Reader 1.01 PQ: 0 ANSI: 0 [ 9.360201] scsi 7:0:0:2: Direct-Access Generic USB SM Reader 1.02 PQ: 0 ANSI: 0 [ 9.360826] scsi 7:0:0:3: Direct-Access Generic USB MS Reader 1.03 PQ: 0 ANSI: 0 [ 9.361930] sd 7:0:0:0: [sdd] Attached SCSI removable disk [ 9.362010] sd 7:0:0:0: Attached scsi generic sg4 type 0 [ 9.362921] sd 7:0:0:1: [sde] Attached SCSI removable disk [ 9.362988] sd 7:0:0:1: Attached scsi generic sg5 type 0 [ 9.364955] sd 7:0:0:2: [sdf] Attached SCSI removable disk [ 9.365033] sd 7:0:0:2: Attached scsi generic sg6 type 0 [ 9.365919] sd 7:0:0:3: [sdg] Attached SCSI removable disk [ 9.365981] sd 7:0:0:3: Attached scsi generic sg7 type 0 [ 13.084031] ata2.00: qc timeout (cmd 0xec) [ 13.084040] ata2.00: failed to IDENTIFY (I/O error, err_mask=0x4) [ 13.084045] ata2.00: revalidation failed (errno=-5) [ 13.084053] ata2: hard resetting link [ 13.568026] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [ 13.568918] ata2.00: configured for UDMA/66 [ 13.568941] ata2: EH complete [ 13.636937] sd 1:0:0:0: [sda] Write Protect is off [ 13.636940] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 13.667626] ata2.00: exception Emask 0x10 SAct 0x0 SErr 0x380000 action 0x6 frozen [ 13.667630] ata2.00: irq_stat 0x08000000, interface fatal error [ 13.667635] ata2: SError: { 10B8B Dispar BadCRC } [ 13.667642] ata2.00: cmd c8/00:40:20:00:00/00:00:00:00:00/e0 tag 0 dma 32768 in [ 13.667645] res 50/00:00:a7:4b:f9/00:00:00:00:00/ed Emask 0x10 (ATA bus error) [ 13.667649] ata2.00: status: { DRDY } [ 13.667655] ata2: hard resetting link [ 14.148027] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [ 14.148983] ata2.00: configured for UDMA/66 [ 14.148992] ata2: EH complete [ 14.179164] ata2.00: exception Emask 0x10 SAct 0x0 SErr 0x180000 action 0x6 frozen [ 14.179168] ata2.00: irq_stat 0x08000000, interface fatal error [ 14.179173] ata2: SError: { 10B8B Dispar } [ 14.179180] ata2.00: cmd c8/00:40:20:00:00/00:00:00:00:00/e0 tag 0 dma 32768 in [ 14.179182] res 50/00:44:00:00:00/00:00:00:00:00/a0 Emask 0x10 (ATA bus error) [ 14.179187] ata2.00: status: { DRDY } [ 14.179192] ata2: hard resetting link [ 14.660037] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [ 14.660919] ata2.00: configured for UDMA/66 [ 14.660928] ata2: EH complete [ 14.690023] ata2.00: exception Emask 0x10 SAct 0x0 SErr 0x380000 action 0x6 frozen [ 14.690028] ata2.00: irq_stat 0x08000000, interface fatal error [ 14.690032] ata2: SError: { 10B8B Dispar BadCRC } [ 14.690039] ata2.00: cmd c8/00:40:20:00:00/00:00:00:00:00/e0 tag 0 dma 32768 in [ 14.690041] res 50/00:44:00:00:00/00:00:00:00:00/a0 Emask 0x10 (ATA bus error) [ 14.690045] ata2.00: status: { DRDY } [ 14.690051] ata2: hard resetting link [ 15.172027] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [ 15.172907] ata2.00: configured for UDMA/66 [ 15.172916] ata2: EH complete [ 15.212337] ata2.00: limiting speed to UDMA/33:PIO4 [ 15.212342] ata2.00: exception Emask 0x10 SAct 0x0 SErr 0x380000 action 0x6 frozen [ 15.212346] ata2.00: irq_stat 0x08000000, interface fatal error [ 15.212350] ata2: SError: { 10B8B Dispar BadCRC } [ 15.212357] ata2.00: cmd c8/00:40:20:00:00/00:00:00:00:00/e0 tag 0 dma 32768 in [ 15.212359] res 50/00:44:00:00:00/00:00:00:00:00/a0 Emask 0x10 (ATA bus error) [ 15.212363] ata2.00: status: { DRDY } [ 15.212369] ata2: hard resetting link [ 15.696026] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [ 15.696906] ata2.00: configured for UDMA/33 [ 15.696915] ata2: EH complete [ 15.734987] ata2.00: exception Emask 0x10 SAct 0x0 SErr 0x180000 action 0x6 frozen [ 15.734992] ata2.00: irq_stat 0x08000000, interface fatal error [ 15.734996] ata2: SError: { 10B8B Dispar } [ 15.735003] ata2.00: cmd c8/00:40:20:00:00/00:00:00:00:00/e0 tag 0 dma 32768 in [ 15.735005] res 50/00:42:00:00:00/00:00:00:00:00/a0 Emask 0x10 (ATA bus error) [ 15.735010] ata2.00: status: { DRDY } [ 15.735015] ata2: hard resetting link [ 16.216026] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [ 16.216968] ata2.00: configured for UDMA/33 [ 16.216977] ata2: EH complete [ 16.256960] ata2.00: exception Emask 0x10 SAct 0x0 SErr 0x380000 action 0x6 frozen [ 16.256964] ata2.00: irq_stat 0x08000000, interface fatal error [ 16.256969] ata2: SError: { 10B8B Dispar BadCRC } [ 16.256976] ata2.00: cmd c8/00:40:20:00:00/00:00:00:00:00/e0 tag 0 dma 32768 in [ 16.256978] res 50/00:42:00:00:00/00:00:00:00:00/a0 Emask 0x10 (ATA bus error) [ 16.256982] ata2.00: status: { DRDY } [ 16.256988] ata2: hard resetting link [ 16.740026] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [ 16.740904] ata2.00: configured for UDMA/33 [ 16.740914] sd 1:0:0:0: [sda] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE,SUGGEST_OK [ 16.740920] sd 1:0:0:0: [sda] Sense Key : Aborted Command [current] [descriptor] [ 16.740928] Descriptor sense data with sense descriptors (in hex): [ 16.740932] 72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00 [ 16.740949] 00 00 00 00 [ 16.740961] sd 1:0:0:0: [sda] Add. Sense: No additional sense information [ 16.740966] end_request: I/O error, dev sda, sector 32 [ 16.740969] Buffer I/O error on device sda, logical block 4 [ 16.740973] Buffer I/O error on device sda, logical block 5 [ 16.740976] Buffer I/O error on device sda, logical block 6 [ 16.740979] Buffer I/O error on device sda, logical block 7 [ 16.740982] Buffer I/O error on device sda, logical block 8 [ 16.740985] Buffer I/O error on device sda, logical block 9 [ 16.740987] Buffer I/O error on device sda, logical block 10 [ 16.740990] Buffer I/O error on device sda, logical block 11 [ 16.740998] ata2: EH complete [ 16.759748] ata2.00: exception Emask 0x10 SAct 0x0 SErr 0x180000 action 0x6 frozen [ 16.759752] ata2.00: irq_stat 0x08000000, interface fatal error [ 16.759756] ata2: SError: { 10B8B Dispar } [ 16.759763] ata2.00: cmd c8/00:08:a8:4b:f9/00:00:00:00:00/ed tag 0 dma 4096 in [ 16.759765] res 50/00:42:00:00:00/00:00:00:00:00/a0 Emask 0x10 (ATA bus error) [ 16.759770] ata2.00: status: { DRDY } [ 16.759775] ata2: hard resetting link [ 17.240026] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [ 17.240907] ata2.00: configured for UDMA/33 [ 17.240916] ata2: EH complete [ 17.259884] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 17.269746] ata2.00: exception Emask 0x10 SAct 0x0 SErr 0x180000 action 0x6 frozen [ 17.269751] ata2.00: irq_stat 0x08000000, interface fatal error [ 17.269755] ata2: SError: { 10B8B Dispar } [ 17.269762] ata2.00: cmd c8/00:08:70:4b:f9/00:00:00:00:00/ed tag 0 dma 4096 in [ 17.269764] res 50/00:00:af:4a:f9/00:00:00:00:00/ed Emask 0x10 (ATA bus error) [ 17.269769] ata2.00: status: { DRDY } [ 17.269774] ata2: hard resetting link [ 17.752026] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [ 17.752909] ata2.00: configured for UDMA/33 [ 17.752919] ata2: EH complete [ 17.769877] sd 1:0:0:0: [sda] 234441648 512-byte hardware sectors: (120 GB/111 GiB) [ 17.776799] ata2.00: exception Emask 0x10 SAct 0x0 SErr 0x180000 action 0x6 frozen [ 17.776804] ata2.00: irq_stat 0x08000000, interface fatal error [ 17.776808] ata2: SError: { 10B8B Dispar } [ 17.776815] ata2.00: cmd c8/00:08:b0:4a:f9/00:00:00:00:00/ed tag 0 dma 4096 in [ 17.776817] res 50/00:00:77:4b:f9/00:00:00:00:00/ed Emask 0x10 (ATA bus error) [ 17.776822] ata2.00: status: { DRDY } [ 17.776828] ata2: hard resetting link [ 18.260038] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [ 18.260920] ata2.00: configured for UDMA/33 [ 18.260929] ata2: EH complete [ 18.276883] ata2.00: exception Emask 0x10 SAct 0x0 SErr 0x180000 action 0x6 frozen [ 18.276888] ata2.00: irq_stat 0x08000000, interface fatal error [ 18.276892] ata2: SError: { 10B8B Dispar } [ 18.276899] ata2.00: cmd c8/00:08:b0:4a:f9/00:00:00:00:00/ed tag 0 dma 4096 in [ 18.276901] res 50/00:42:00:00:00/00:00:00:00:00/a0 Emask 0x10 (ATA bus error) [ 18.276906] ata2.00: status: { DRDY } [ 18.276911] ata2: hard resetting link [ 18.760036] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [ 18.760917] ata2.00: configured for UDMA/33 [ 18.760927] ata2: EH complete [ 18.799218] ata2.00: exception Emask 0x10 SAct 0x0 SErr 0x180000 action 0x6 frozen [ 18.799222] ata2.00: irq_stat 0x08000000, interface fatal error [ 18.799226] ata2: SError: { 10B8B Dispar } [ 18.799233] ata2.00: cmd c8/00:08:b0:4a:f9/00:00:00:00:00/ed tag 0 dma 4096 in [ 18.799235] res 50/00:42:00:00:00/00:00:00:00:00/a0 Emask 0x10 (ATA bus error) [ 18.799240] ata2.00: status: { DRDY } [ 18.799245] ata2: hard resetting link [ 19.280037] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [ 19.280918] ata2.00: configured for UDMA/33 [ 19.280927] ata2: EH complete [ 19.321530] ata2.00: exception Emask 0x10 SAct 0x0 SErr 0x180000 action 0x6 frozen [ 19.321534] ata2.00: irq_stat 0x08000000, interface fatal error [ 19.321539] ata2: SError: { 10B8B Dispar } [ 19.321546] ata2.00: cmd c8/00:08:b0:4a:f9/00:00:00:00:00/ed tag 0 dma 4096 in [ 19.321548] res 50/00:42:00:00:00/00:00:00:00:00/a0 Emask 0x10 (ATA bus error) [ 19.321552] ata2.00: status: { DRDY } [ 19.321558] ata2: hard resetting link [ 19.804025] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [ 19.804906] ata2.00: configured for UDMA/33 [ 19.804915] ata2: EH complete [ 19.843894] sd 1:0:0:0: [sda] Write Protect is off [ 19.843899] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 19.868868] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 19.869387] ata2.00: exception Emask 0x10 SAct 0x0 SErr 0x380000 action 0x6 frozen [ 19.869391] ata2.00: irq_stat 0x08000000, interface fatal error [ 19.869396] ata2: SError: { 10B8B Dispar BadCRC } [ 19.869404] ata2.00: cmd c8/00:80:60:00:00/00:00:00:00:00/e0 tag 0 dma 65536 in [ 19.869406] res 50/00:00:27:00:00/00:00:00:00:00/e0 Emask 0x10 (ATA bus error) [ 19.869410] ata2.00: status: { DRDY } [ 19.869416] ata2: hard resetting link [ 20.352026] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [ 20.352938] ata2.00: configured for UDMA/33 [ 20.352948] ata2: EH complete [ 20.380585] ata2.00: exception Emask 0x10 SAct 0x0 SErr 0x380000 action 0x6 frozen [ 20.380589] ata2.00: irq_stat 0x08000000, interface fatal error [ 20.380594] ata2: SError: { 10B8B Dispar BadCRC } [ 20.380601] ata2.00: cmd c8/00:80:60:00:00/00:00:00:00:00/e0 tag 0 dma 65536 in [ 20.380603] res 50/00:42:00:00:00/00:00:00:00:00/a0 Emask 0x10 (ATA bus error) [ 20.380608] ata2.00: status: { DRDY } [ 20.380613] ata2: hard resetting link [ 20.864037] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [ 20.864919] ata2.00: configured for UDMA/33 [ 20.864928] ata2: EH complete [ 20.892119] ata2.00: exception Emask 0x10 SAct 0x0 SErr 0x180000 action 0x6 frozen [ 20.892123] ata2.00: irq_stat 0x08000000, interface fatal error [ 20.892128] ata2: SError: { 10B8B Dispar } [ 20.892134] ata2.00: cmd c8/00:80:60:00:00/00:00:00:00:00/e0 tag 0 dma 65536 in [ 20.892136] res 50/00:42:00:00:00/00:00:00:00:00/a0 Emask 0x10 (ATA bus error) [ 20.892141] ata2.00: status: { DRDY } [ 20.892146] ata2: hard resetting link [ 21.376027] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [ 21.376908] ata2.00: configured for UDMA/33 [ 21.376917] ata2: EH complete [ 21.402979] ata2.00: exception Emask 0x10 SAct 0x0 SErr 0x380000 action 0x6 frozen [ 21.402983] ata2.00: irq_stat 0x08000000, interface fatal error [ 21.402988] ata2: SError: { 10B8B Dispar BadCRC } [ 21.402995] ata2.00: cmd c8/00:80:60:00:00/00:00:00:00:00/e0 tag 0 dma 65536 in [ 21.402997] res 50/00:42:00:00:00/00:00:00:00:00/a0 Emask 0x10 (ATA bus error) [ 21.403001] ata2.00: status: { DRDY } [ 21.403006] ata2: hard resetting link [ 21.884036] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [ 21.884987] ata2.00: configured for UDMA/33 [ 21.884995] ata2: EH complete [ 21.914178] ata2.00: exception Emask 0x10 SAct 0x0 SErr 0x180000 action 0x6 frozen [ 21.914182] ata2.00: irq_stat 0x08000000, interface fatal error [ 21.914187] ata2: SError: { 10B8B Dispar } [ 21.914193] ata2.00: cmd c8/00:80:60:00:00/00:00:00:00:00/e0 tag 0 dma 65536 in [ 21.914195] res 50/00:42:00:00:00/00:00:00:00:00/a0 Emask 0x10 (ATA bus error) [ 21.914199] ata2.00: status: { DRDY } [ 21.914205] ata2: hard resetting link [ 22.396026] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [ 22.396906] ata2.00: configured for UDMA/33 [ 22.396915] ata2: EH complete [ 22.425884] ata2.00: exception Emask 0x10 SAct 0x0 SErr 0x380000 action 0x6 frozen [ 22.425888] ata2.00: irq_stat 0x08000000, interface fatal error [ 22.425892] ata2: SError: { 10B8B Dispar BadCRC } [ 22.425899] ata2.00: cmd c8/00:80:60:00:00/00:00:00:00:00/e0 tag 0 dma 65536 in [ 22.425901] res 50/00:42:00:00:00/00:00:00:00:00/a0 Emask 0x10 (ATA bus error) [ 22.425906] ata2.00: status: { DRDY } [ 22.425911] ata2: hard resetting link [ 22.908026] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [ 22.908906] ata2.00: configured for UDMA/33 [ 22.908916] sd 1:0:0:0: [sda] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE,SUGGEST_OK [ 22.908922] sd 1:0:0:0: [sda] Sense Key : Aborted Command [current] [descriptor] [ 22.908930] Descriptor sense data with sense descriptors (in hex): [ 22.908933] 72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00 [ 22.908950] 00 00 00 00 [ 22.908962] sd 1:0:0:0: [sda] Add. Sense: No additional sense information [ 22.908967] end_request: I/O error, dev sda, sector 96 [ 22.908970] Buffer I/O error on device sda, logical block 12 [ 22.908975] Buffer I/O error on device sda, logical block 13 [ 22.908978] Buffer I/O error on device sda, logical block 14 [ 22.908981] Buffer I/O error on device sda, logical block 15 [ 22.908984] Buffer I/O error on device sda, logical block 16 [ 22.908987] Buffer I/O error on device sda, logical block 17 [ 22.908990] Buffer I/O error on device sda, logical block 18 [ 22.908992] Buffer I/O error on device sda, logical block 19 [ 22.908995] Buffer I/O error on device sda, logical block 20 [ 22.908998] Buffer I/O error on device sda, logical block 21 [ 22.909008] ata2: EH complete [ 22.909212] sd 1:0:0:0: [sda] 234441648 512-byte hardware sectors: (120 GB/111 GiB) [ 22.909228] sd 1:0:0:0: [sda] Write Protect is off [ 22.909231] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 22.909255] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 22.947354] ata2.00: exception Emask 0x10 SAct 0x0 SErr 0x380000 action 0x6 frozen [ 22.947360] ata2.00: irq_stat 0x08000000, interface fatal error [ 22.947365] ata2: SError: { 10B8B Dispar BadCRC } [ 22.947373] ata2.00: cmd c8/00:20:3f:00:00/00:00:00:00:00/e0 tag 0 dma 16384 in [ 22.947375] res 50/00:42:00:00:00/00:00:00:00:00/a0 Emask 0x10 (ATA bus error) [ 22.947380] ata2.00: status: { DRDY } [ 22.947387] ata2: hard resetting link [ 23.428038] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [ 23.428928] ata2.00: configured for UDMA/33 [ 23.428939] ata2: EH complete [ 23.458539] ata2.00: exception Emask 0x10 SAct 0x0 SErr 0x180000 action 0x6 frozen [ 23.458544] ata2.00: irq_stat 0x08000000, interface fatal error [ 23.458549] ata2: SError: { 10B8B Dispar } [ 23.458556] ata2.00: cmd c8/00:20:3f:00:00/00:00:00:00:00/e0 tag 0 dma 16384 in [ 23.458558] res 50/00:42:00:00:00/00:00:00:00:00/a0 Emask 0x10 (ATA bus error) [ 23.458562] ata2.00: status: { DRDY } [ 23.458568] ata2: hard resetting link [ 23.940026] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [ 23.940907] ata2.00: configured for UDMA/33 [ 23.940916] ata2: EH complete [ 23.969739] ata2.00: exception Emask 0x10 SAct 0x0 SErr 0x180000 action 0x6 frozen [ 23.969743] ata2.00: irq_stat 0x08000000, interface fatal error [ 23.969748] ata2: SError: { 10B8B Dispar } [ 23.969755] ata2.00: cmd c8/00:20:3f:00:00/00:00:00:00:00/e0 tag 0 dma 16384 in [ 23.969757] res 50/00:42:00:00:00/00:00:00:00:00/a0 Emask 0x10 (ATA bus error) [ 23.969761] ata2.00: status: { DRDY } [ 23.969767] ata2: hard resetting link [ 24.452027] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [ 24.452936] ata2.00: configured for UDMA/33 [ 24.452944] ata2: EH complete [ 24.480938] ata2.00: exception Emask 0x10 SAct 0x0 SErr 0x180000 action 0x6 frozen [ 24.480942] ata2.00: irq_stat 0x08000000, interface fatal error [ 24.480946] ata2: SError: { 10B8B Dispar } [ 24.480954] ata2.00: cmd c8/00:20:3f:00:00/00:00:00:00:00/e0 tag 0 dma 16384 in [ 24.480955] res 50/00:42:00:00:00/00:00:00:00:00/a0 Emask 0x10 (ATA bus error) [ 24.480960] ata2.00: status: { DRDY } [ 24.480966] ata2: hard resetting link [ 24.964024] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [ 24.964904] ata2.00: configured for UDMA/33 [ 24.964913] ata2: EH complete [ 25.003251] ata2.00: exception Emask 0x10 SAct 0x0 SErr 0x180000 action 0x6 frozen [ 25.003256] ata2.00: irq_stat 0x08000000, interface fatal error [ 25.003260] ata2: SError: { 10B8B Dispar } [ 25.003267] ata2.00: cmd c8/00:20:3f:00:00/00:00:00:00:00/e0 tag 0 dma 16384 in [ 25.003269] res 50/00:42:00:00:00/00:00:00:00:00/a0 Emask 0x10 (ATA bus error) [ 25.003274] ata2.00: status: { DRDY } [ 25.003280] ata2: hard resetting link [ 25.484036] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [ 25.484974] ata2.00: configured for UDMA/33 [ 25.484983] ata2: EH complete [ 25.514448] ata2.00: exception Emask 0x10 SAct 0x0 SErr 0x380000 action 0x6 frozen [ 25.514453] ata2.00: irq_stat 0x08000000, interface fatal error [ 25.514457] ata2: SError: { 10B8B Dispar BadCRC } [ 25.514464] ata2.00: cmd c8/00:20:3f:00:00/00:00:00:00:00/e0 tag 0 dma 16384 in [ 25.514466] res 50/00:42:00:00:00/00:00:00:00:00/a0 Emask 0x10 (ATA bus error) [ 25.514470] ata2.00: status: { DRDY } [ 25.514476] ata2: hard resetting link [ 25.996037] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [ 25.996915] ata2.00: configured for UDMA/33 [ 25.996926] sd 1:0:0:0: [sda] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE,SUGGEST_OK [ 25.996932] sd 1:0:0:0: [sda] Sense Key : Aborted Command [current] [descriptor] [ 25.996941] Descriptor sense data with sense descriptors (in hex): [ 25.996945] 72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00 [ 25.996961] 00 00 00 00 [ 25.996973] sd 1:0:0:0: [sda] Add. Sense: No additional sense information [ 25.996978] end_request: I/O error, dev sda, sector 63 [ 25.996999] ata2: EH complete [ 25.997034] sd 1:0:0:0: [sda] 234441648 512-byte hardware sectors: (120 GB/111 GiB) [ 25.997050] sd 1:0:0:0: [sda] Write Protect is off [ 25.997052] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 25.997077] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 25.997103] sd 1:0:0:0: [sda] 234441648 512-byte hardware sectors: (120 GB/111 GiB) [ 25.997117] sd 1:0:0:0: [sda] Write Protect is off [ 25.997119] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 25.997142] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 26.210163] PM: Starting manual resume from disk [ 26.210167] PM: Resume from partition 8:37 [ 26.210168] PM: Checking hibernation image. [ 26.211636] PM: Resume from disk failed. [ 26.258061] kjournald starting. Commit interval 5 seconds [ 26.258071] EXT3-fs: mounted filesystem with ordered data mode. [ 35.383141] udev: starting version 141 [ 35.556333] udev: renamed network interface eth0 to eth1 [ 35.557744] ata2.00: exception Emask 0x10 SAct 0x0 SErr 0x380000 action 0x6 frozen [ 35.557750] ata2.00: irq_stat 0x08000000, interface fatal error [ 35.557753] ata2: SError: { 10B8B Dispar BadCRC } [ 35.557758] ata2.00: cmd c8/00:20:00:00:00/00:00:00:00:00/e0 tag 0 dma 16384 in [ 35.557759] res 50/00:00:46:00:00/00:00:00:00:00/e0 Emask 0x10 (ATA bus error) [ 35.557763] ata2.00: status: { DRDY } [ 35.557770] ata2: hard resetting link [ 35.989797] synaptics was reset on resume, see synaptics_resume_reset if you have trouble on resume [ 36.040047] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [ 36.040996] ata2.00: configured for UDMA/33 [ 36.041011] ata2: EH complete [ 36.115057] ata2.00: exception Emask 0x10 SAct 0x0 SErr 0x180000 action 0x6 frozen [ 36.115064] ata2.00: irq_stat 0x08000000, interface fatal error [ 36.115069] ata2: SError: { 10B8B Dispar } [ 36.115077] ata2.00: cmd c8/00:08:00:4b:f9/00:00:00:00:00/ed tag 0 dma 4096 in [ 36.115079] res 50/00:00:1f:00:00/00:00:00:00:00/e0 Emask 0x10 (ATA bus error) [ 36.115083] ata2.00: status: { DRDY } [ 36.115091] ata2: hard resetting link [ 36.170935] input: PC Speaker as /devices/platform/pcspkr/input/input5 [ 36.383220] psmouse serio1: ID: 10 00 64<6>input: GenPS/2 Genius Mouse as /devices/platform/i8042/serio1/input/input6 [ 36.596047] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [ 36.596943] ata2.00: configured for UDMA/33 [ 36.596959] ata2: EH complete [ 36.615202] sd 1:0:0:0: [sda] 234441648 512-byte hardware sectors: (120 GB/111 GiB) [ 36.618580] ata2.00: exception Emask 0x10 SAct 0x0 SErr 0x180000 action 0x6 frozen [ 36.618586] ata2.00: irq_stat 0x08000000, interface fatal error [ 36.618591] ata2: SError: { 10B8B Dispar } [ 36.618599] ata2.00: cmd c8/00:08:a0:4b:f9/00:00:00:00:00/ed tag 0 dma 4096 in [ 36.618601] res 50/00:00:07:4b:f9/00:00:00:00:00/ed Emask 0x10 (ATA bus error) [ 36.618605] ata2.00: status: { DRDY } [ 36.618612] ata2: hard resetting link [ 36.802554] HDA Intel 0000:00:09.0: power state changed by ACPI to D0 [ 36.802908] ACPI: PCI Interrupt Link [LAZA] enabled at IRQ 23 [ 36.802913] HDA Intel 0000:00:09.0: PCI INT A -> Link[LAZA] -> GSI 23 (level, low) -> IRQ 23 [ 36.803163] HDA Intel 0000:00:09.0: setting latency timer to 64 [ 36.835498] usbcore: registered new interface driver snd-usb-audio [ 37.100027] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [ 37.100917] ata2.00: configured for UDMA/33 [ 37.100937] ata2: EH complete [ 37.118663] ata2.00: exception Emask 0x10 SAct 0x0 SErr 0x180000 action 0x6 frozen [ 37.118668] ata2.00: irq_stat 0x08000000, interface fatal error [ 37.118673] ata2: SError: { 10B8B Dispar } [ 37.118680] ata2.00: cmd c8/00:08:a0:4b:f9/00:00:00:00:00/ed tag 0 dma 4096 in [ 37.118682] res 50/00:42:00:00:00/00:00:00:00:00/a0 Emask 0x10 (ATA bus error) [ 37.118687] ata2.00: status: { DRDY } [ 37.118693] ata2: hard resetting link [ 37.192023] hda_codec: Unknown model for ALC883, trying auto-probe from BIOS... [ 37.600034] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [ 37.600959] ata2.00: configured for UDMA/33 [ 37.600971] ata2: EH complete [ 37.641002] ata2.00: exception Emask 0x10 SAct 0x0 SErr 0x180000 action 0x6 frozen [ 37.641008] ata2.00: irq_stat 0x08000000, interface fatal error [ 37.641012] ata2: SError: { 10B8B Dispar } [ 37.641019] ata2.00: cmd c8/00:08:a0:4b:f9/00:00:00:00:00/ed tag 0 dma 4096 in [ 37.641021] res 50/00:42:00:00:00/00:00:00:00:00/a0 Emask 0x10 (ATA bus error) [ 37.641026] ata2.00: status: { DRDY } [ 37.641032] ata2: hard resetting link [ 38.124031] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [ 38.124926] ata2.00: configured for UDMA/33 [ 38.124945] ata2: EH complete [ 38.163309] ata2.00: exception Emask 0x10 SAct 0x0 SErr 0x180000 action 0x6 frozen [ 38.163315] ata2.00: irq_stat 0x08000000, interface fatal error [ 38.163319] ata2: SError: { 10B8B Dispar } [ 38.163327] ata2.00: cmd c8/00:08:a0:4b:f9/00:00:00:00:00/ed tag 0 dma 4096 in [ 38.163329] res 50/00:42:00:00:00/00:00:00:00:00/a0 Emask 0x10 (ATA bus error) [ 38.163334] ata2.00: status: { DRDY } [ 38.163340] ata2: hard resetting link [ 38.644025] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [ 38.644906] ata2.00: configured for UDMA/33 [ 38.644916] ata2: EH complete [ 38.685615] ata2.00: exception Emask 0x10 SAct 0x0 SErr 0x180000 action 0x6 frozen [ 38.685619] ata2.00: irq_stat 0x08000000, interface fatal error [ 38.685624] ata2: SError: { 10B8B Dispar } [ 38.685631] ata2.00: cmd c8/00:08:a0:4b:f9/00:00:00:00:00/ed tag 0 dma 4096 in [ 38.685633] res 50/00:42:00:00:00/00:00:00:00:00/a0 Emask 0x10 (ATA bus error) [ 38.685637] ata2.00: status: { DRDY } [ 38.685643] ata2: hard resetting link [ 39.168026] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [ 39.168901] ata2.00: configured for UDMA/33 [ 39.168910] ata2: EH complete [ 39.207927] ata2.00: exception Emask 0x10 SAct 0x0 SErr 0x180000 action 0x6 frozen [ 39.207931] ata2.00: irq_stat 0x08000000, interface fatal error [ 39.207936] ata2: SError: { 10B8B Dispar } [ 39.207943] ata2.00: cmd c8/00:08:a0:4b:f9/00:00:00:00:00/ed tag 0 dma 4096 in [ 39.207945] res 50/00:42:00:00:00/00:00:00:00:00/a0 Emask 0x10 (ATA bus error) [ 39.207949] ata2.00: status: { DRDY } [ 39.207955] ata2: hard resetting link [ 39.688026] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [ 39.688909] ata2.00: configured for UDMA/33 [ 39.688922] sd 1:0:0:0: [sda] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE,SUGGEST_OK [ 39.688928] sd 1:0:0:0: [sda] Sense Key : Aborted Command [current] [descriptor] [ 39.688936] Descriptor sense data with sense descriptors (in hex): [ 39.688940] 72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00 [ 39.688957] 00 00 00 00 [ 39.688967] sd 1:0:0:0: [sda] Add. Sense: No additional sense information [ 39.688972] end_request: I/O error, dev sda, sector 234441632 [ 39.688976] __ratelimit: 22 callbacks suppressed [ 39.688979] Buffer I/O error on device sda, logical block 29305204 [ 39.688994] ata2: EH complete [ 39.689038] sd 1:0:0:0: [sda] Write Protect is off [ 39.689040] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 39.719129] ata2.00: exception Emask 0x10 SAct 0x0 SErr 0x180000 action 0x6 frozen [ 39.719133] ata2.00: irq_stat 0x08000000, interface fatal error [ 39.719137] ata2: SError: { 10B8B Dispar } [ 39.719145] ata2.00: cmd c8/00:08:a0:4b:f9/00:00:00:00:00/ed tag 0 dma 4096 in [ 39.719147] res 50/00:42:00:00:00/00:00:00:00:00/a0 Emask 0x10 (ATA bus error) [ 39.719151] ata2.00: status: { DRDY } [ 39.719157] ata2: hard resetting link [ 40.200026] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [ 40.200945] ata2.00: configured for UDMA/33 [ 40.200954] ata2: EH complete [ 40.230328] ata2.00: exception Emask 0x10 SAct 0x0 SErr 0x380000 action 0x6 frozen [ 40.230333] ata2.00: irq_stat 0x08000000, interface fatal error [ 40.230337] ata2: SError: { 10B8B Dispar BadCRC } [ 40.230344] ata2.00: cmd c8/00:08:a0:4b:f9/00:00:00:00:00/ed tag 0 dma 4096 in [ 40.230346] res 50/00:42:00:00:00/00:00:00:00:00/a0 Emask 0x10 (ATA bus error) [ 40.230351] ata2.00: status: { DRDY } [ 40.230356] ata2: hard resetting link [ 40.712026] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [ 40.712909] ata2.00: configured for UDMA/33 [ 40.712918] ata2: EH complete [ 40.741526] ata2.00: exception Emask 0x10 SAct 0x0 SErr 0x380000 action 0x6 frozen [ 40.741531] ata2.00: irq_stat 0x08000000, interface fatal error [ 40.741535] ata2: SError: { 10B8B Dispar BadCRC } [ 40.741542] ata2.00: cmd c8/00:08:a0:4b:f9/00:00:00:00:00/ed tag 0 dma 4096 in [ 40.741544] res 50/00:42:00:00:00/00:00:00:00:00/a0 Emask 0x10 (ATA bus error) [ 40.741549] ata2.00: status: { DRDY } [ 40.741554] ata2: hard resetting link [ 41.224026] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [ 41.224975] ata2.00: configured for UDMA/33 [ 41.224984] ata2: EH complete [ 41.252726] ata2.00: exception Emask 0x10 SAct 0x0 SErr 0x180000 action 0x6 frozen [ 41.252730] ata2.00: irq_stat 0x08000000, interface fatal error [ 41.252734] ata2: SError: { 10B8B Dispar } [ 41.252741] ata2.00: cmd c8/00:08:a0:4b:f9/00:00:00:00:00/ed tag 0 dma 4096 in [ 41.252743] res 50/00:42:00:00:00/00:00:00:00:00/a0 Emask 0x10 (ATA bus error) [ 41.252748] ata2.00: status: { DRDY } [ 41.252754] ata2: hard resetting link [ 41.736026] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [ 41.736905] ata2.00: configured for UDMA/33 [ 41.736914] ata2: EH complete [ 41.763923] ata2.00: exception Emask 0x10 SAct 0x0 SErr 0x180000 action 0x6 frozen [ 41.763927] ata2.00: irq_stat 0x08000000, interface fatal error [ 41.763932] ata2: SError: { 10B8B Dispar } [ 41.763939] ata2.00: cmd c8/00:08:a0:4b:f9/00:00:00:00:00/ed tag 0 dma 4096 in [ 41.763940] res 50/00:42:00:00:00/00:00:00:00:00/a0 Emask 0x10 (ATA bus error) [ 41.763945] ata2.00: status: { DRDY } [ 41.763951] ata2: hard resetting link [ 42.244025] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [ 42.244913] ata2.00: configured for UDMA/33 [ 42.244922] ata2: EH complete [ 42.305932] ata2.00: exception Emask 0x10 SAct 0x0 SErr 0x180000 action 0x6 frozen [ 42.305937] ata2.00: irq_stat 0x08000000, interface fatal error [ 42.305942] ata2: SError: { 10B8B Dispar } [ 42.305949] ata2.00: cmd c8/00:40:20:00:00/00:00:00:00:00/e0 tag 0 dma 32768 in [ 42.305951] res 50/00:00:a7:4b:f9/00:00:00:00:00/ed Emask 0x10 (ATA bus error) [ 42.305956] ata2.00: status: { DRDY } [ 42.305962] ata2: hard resetting link [ 42.788026] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [ 42.788931] ata2.00: configured for UDMA/33 [ 42.788940] ata2: EH complete [ 42.817633] ata2.00: exception Emask 0x10 SAct 0x0 SErr 0x180000 action 0x6 frozen [ 42.817637] ata2.00: irq_stat 0x08000000, interface fatal error [ 42.817642] ata2: SError: { 10B8B Dispar } [ 42.817649] ata2.00: cmd c8/00:40:20:00:00/00:00:00:00:00/e0 tag 0 dma 32768 in [ 42.817651] res 50/00:42:00:00:00/00:00:00:00:00/a0 Emask 0x10 (ATA bus error) [ 42.817656] ata2.00: status: { DRDY } [ 42.817661] ata2: hard resetting link [ 43.300026] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [ 43.300906] ata2.00: configured for UDMA/33 [ 43.300915] ata2: EH complete [ 43.328326] ata2.00: exception Emask 0x10 SAct 0x0 SErr 0x380000 action 0x6 frozen [ 43.328330] ata2.00: irq_stat 0x08000000, interface fatal error [ 43.328335] ata2: SError: { 10B8B Dispar BadCRC } [ 43.328342] ata2.00: cmd c8/00:40:20:00:00/00:00:00:00:00/e0 tag 0 dma 32768 in [ 43.328344] res 50/00:42:00:00:00/00:00:00:00:00/a0 Emask 0x10 (ATA bus error) [ 43.328349] ata2.00: status: { DRDY } [ 43.328354] ata2: hard resetting link [ 43.812026] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [ 43.812906] ata2.00: configured for UDMA/33 [ 43.812915] ata2: EH complete [ 43.850643] ata2.00: exception Emask 0x10 SAct 0x0 SErr 0x180000 action 0x6 frozen [ 43.850647] ata2.00: irq_stat 0x08000000, interface fatal error [ 43.850652] ata2: SError: { 10B8B Dispar } [ 43.850659] ata2.00: cmd c8/00:40:20:00:00/00:00:00:00:00/e0 tag 0 dma 32768 in [ 43.850661] res 50/00:42:00:00:00/00:00:00:00:00/a0 Emask 0x10 (ATA bus error) [ 43.850665] ata2.00: status: { DRDY } [ 43.850671] ata2: hard resetting link [ 44.332026] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [ 44.332949] ata2.00: configured for UDMA/33 [ 44.332958] ata2: EH complete [ 44.361845] ata2.00: exception Emask 0x10 SAct 0x0 SErr 0x180000 action 0x6 frozen [ 44.361849] ata2.00: irq_stat 0x08000000, interface fatal error [ 44.361853] ata2: SError: { 10B8B Dispar } [ 44.361861] ata2.00: cmd c8/00:40:20:00:00/00:00:00:00:00/e0 tag 0 dma 32768 in [ 44.361863] res 50/00:42:00:00:00/00:00:00:00:00/a0 Emask 0x10 (ATA bus error) [ 44.361867] ata2.00: status: { DRDY } [ 44.361873] ata2: hard resetting link [ 44.844026] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [ 44.844909] ata2.00: configured for UDMA/33 [ 44.844918] ata2: EH complete [ 44.884155] ata2.00: exception Emask 0x10 SAct 0x0 SErr 0x380000 action 0x6 frozen [ 44.884160] ata2.00: irq_stat 0x08000000, interface fatal error [ 44.884164] ata2: SError: { 10B8B Dispar BadCRC } [ 44.884171] ata2.00: cmd c8/00:40:20:00:00/00:00:00:00:00/e0 tag 0 dma 32768 in [ 44.884173] res 50/00:42:00:00:00/00:00:00:00:00/a0 Emask 0x10 (ATA bus error) [ 44.884178] ata2.00: status: { DRDY } [ 44.884183] ata2: hard resetting link [ 45.368026] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [ 45.368908] ata2.00: configured for UDMA/33 [ 45.368917] sd 1:0:0:0: [sda] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE,SUGGEST_OK [ 45.368922] sd 1:0:0:0: [sda] Sense Key : Aborted Command [current] [descriptor] [ 45.368930] Descriptor sense data with sense descriptors (in hex): [ 45.368934] 72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00 [ 45.368951] 00 00 00 00 [ 45.368963] sd 1:0:0:0: [sda] Add. Sense: No additional sense information [ 45.368968] end_request: I/O error, dev sda, sector 32 [ 45.368971] Buffer I/O error on device sda, logical block 4 [ 45.368975] Buffer I/O error on device sda, logical block 5 [ 45.368978] Buffer I/O error on device sda, logical block 6 [ 45.368980] Buffer I/O error on device sda, logical block 7 [ 45.368983] Buffer I/O error on device sda, logical block 8 [ 45.368986] Buffer I/O error on device sda, logical block 9 [ 45.368989] Buffer I/O error on device sda, logical block 10 [ 45.368992] Buffer I/O error on device sda, logical block 11 [ 45.368999] ata2: EH complete [ 45.369018] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 45.398058] ata2.00: exception Emask 0x10 SAct 0x0 SErr 0x180000 action 0x6 frozen [ 45.398062] ata2.00: irq_stat 0x08000000, interface fatal error [ 45.398066] ata2: SError: { 10B8B Dispar } [ 45.398074] ata2.00: cmd c8/00:08:a8:4b:f9/00:00:00:00:00/ed tag 0 dma 4096 in [ 45.398075] res 50/00:42:00:00:00/00:00:00:00:00/a0 Emask 0x10 (ATA bus error) [ 45.398080] ata2.00: status: { DRDY } [ 45.398086] ata2: hard resetting link [ 45.880026] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [ 45.880907] ata2.00: configured for UDMA/33 [ 45.880916] ata2: EH complete [ 45.914852] ata2.00: exception Emask 0x10 SAct 0x0 SErr 0x380000 action 0x6 frozen [ 45.914857] ata2.00: irq_stat 0x08000000, interface fatal error [ 45.914862] ata2: SError: { 10B8B Dispar BadCRC } [ 45.914869] ata2.00: cmd c8/00:08:a8:4a:f9/00:00:00:00:00/ed tag 0 dma 4096 in [ 45.914871] res 50/00:00:af:4b:f9/00:00:00:00:00/ed Emask 0x10 (ATA bus error) [ 45.914875] ata2.00: status: { DRDY } [ 45.914881] ata2: hard resetting link [ 46.396026] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [ 46.396979] ata2.00: configured for UDMA/33 [ 46.396988] ata2: EH complete [ 46.414990] sd 1:0:0:0: [sda] 234441648 512-byte hardware sectors: (120 GB/111 GiB) [ 46.419256] ata2.00: exception Emask 0x10 SAct 0x0 SErr 0x180000 action 0x6 frozen [ 46.419260] ata2.00: irq_stat 0x08000000, interface fatal error [ 46.419264] ata2: SError: { 10B8B Dispar } [ 46.419271] ata2.00: cmd c8/00:08:70:4b:f9/00:00:00:00:00/ed tag 0 dma 4096 in [ 46.419273] res 50/00:00:af:4a:f9/00:00:00:00:00/ed Emask 0x10 (ATA bus error) [ 46.419278] ata2.00: status: { DRDY } [ 46.419283] ata2: hard resetting link [ 46.900026] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [ 46.900965] ata2.00: configured for UDMA/33 [ 46.900974] ata2: EH complete [ 46.919341] ata2.00: exception Emask 0x10 SAct 0x0 SErr 0x180000 action 0x6 frozen [ 46.919345] ata2.00: irq_stat 0x08000000, interface fatal error [ 46.919350] ata2: SError: { 10B8B Dispar } [ 46.919357] ata2.00: cmd c8/00:08:70:4b:f9/00:00:00:00:00/ed tag 0 dma 4096 in [ 46.919359] res 50/00:42:00:00:00/00:00:00:00:00/a0 Emask 0x10 (ATA bus error) [ 46.919363] ata2.00: status: { DRDY } [ 46.919369] ata2: hard resetting link [ 47.400026] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [ 47.400906] ata2.00: configured for UDMA/33 [ 47.400915] ata2: EH complete [ 47.419427] ata2.00: exception Emask 0x10 SAct 0x0 SErr 0x380000 action 0x6 frozen [ 47.419431] ata2.00: irq_stat 0x08000000, interface fatal error [ 47.419435] ata2: SError: { 10B8B Dispar BadCRC } [ 47.419442] ata2.00: cmd c8/00:08:70:4b:f9/00:00:00:00:00/ed tag 0 dma 4096 in [ 47.419445] res 50/00:42:00:00:00/00:00:00:00:00/a0 Emask 0x10 (ATA bus error) [ 47.419449] ata2.00: status: { DRDY } [ 47.419455] ata2: hard resetting link [ 47.900025] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [ 47.900905] ata2.00: configured for UDMA/33 [ 47.900914] ata2: EH complete [ 47.919513] ata2.00: exception Emask 0x10 SAct 0x0 SErr 0x180000 action 0x6 frozen [ 47.919517] ata2.00: irq_stat 0x08000000, interface fatal error [ 47.919521] ata2: SError: { 10B8B Dispar } [ 47.919528] ata2.00: cmd c8/00:08:70:4b:f9/00:00:00:00:00/ed tag 0 dma 4096 in [ 47.919530] res 50/00:42:00:00:00/00:00:00:00:00/a0 Emask 0x10 (ATA bus error) [ 47.919534] ata2.00: status: { DRDY } [ 47.919540] ata2: hard resetting link [ 48.400025] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [ 48.400905] ata2.00: configured for UDMA/33 [ 48.400913] ata2: EH complete [ 48.441847] ata2.00: exception Emask 0x10 SAct 0x0 SErr 0x180000 action 0x6 frozen [ 48.441851] ata2.00: irq_stat 0x08000000, interface fatal error [ 48.441855] ata2: SError: { 10B8B Dispar } [ 48.441862] ata2.00: cmd c8/00:08:70:4b:f9/00:00:00:00:00/ed tag 0 dma 4096 in [ 48.441864] res 50/00:42:00:00:00/00:00:00:00:00/a0 Emask 0x10 (ATA bus error) [ 48.441869] ata2.00: status: { DRDY } [ 48.441875] ata2: hard resetting link [ 48.924024] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [ 48.924905] ata2.00: configured for UDMA/33 [ 48.924913] ata2: EH complete [ 48.964201] sd 1:0:0:0: [sda] Write Protect is off [ 48.964205] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 48.964362] ata2.00: exception Emask 0x10 SAct 0x0 SErr 0x380000 action 0x6 frozen [ 48.964366] ata2.00: irq_stat 0x08000000, interface fatal error [ 48.964371] ata2: SError: { 10B8B Dispar BadCRC } [ 48.964378] ata2.00: cmd c8/00:08:b0:4a:f9/00:00:00:00:00/ed tag 0 dma 4096 in [ 48.964380] res 50/00:00:77:4b:f9/00:00:00:00:00/ed Emask 0x10 (ATA bus error) [ 48.964384] ata2.00: status: { DRDY } [ 48.964390] ata2: hard resetting link [ 49.448026] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [ 49.448966] ata2.00: configured for UDMA/33 [ 49.448975] ata2: EH complete [ 49.507107] ata2.00: exception Emask 0x10 SAct 0x0 SErr 0x180000 action 0x6 frozen [ 49.507112] ata2.00: irq_stat 0x08000000, interface fatal error [ 49.507116] ata2: SError: { 10B8B Dispar } [ 49.507124] ata2.00: cmd c8/00:08:20:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in [ 49.507125] res 50/00:00:b7:4a:f9/00:00:00:00:00/ed Emask 0x10 (ATA bus error) [ 49.507130] ata2.00: status: { DRDY } [ 49.507136] ata2: hard resetting link [ 49.988026] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [ 49.988995] ata2.00: configured for UDMA/33 [ 49.989004] ata2: EH complete [ 50.018759] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 50.018811] sd 1:0:0:0: [sda] 234441648 512-byte hardware sectors: (120 GB/111 GiB) [ 50.018827] sd 1:0:0:0: [sda] Write Protect is off [ 50.018830] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 50.018854] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 50.028845] ata2.00: exception Emask 0x10 SAct 0x0 SErr 0x380000 action 0x6 frozen [ 50.028852] ata2.00: irq_stat 0x08000000, interface fatal error [ 50.028857] ata2: SError: { 10B8B Dispar BadCRC } [ 50.028864] ata2.00: cmd c8/00:20:3f:00:00/00:00:00:00:00/e0 tag 0 dma 16384 in [ 50.028866] res 50/00:00:27:00:00/00:00:00:00:00/e0 Emask 0x10 (ATA bus error) [ 50.028871] ata2.00: status: { DRDY } [ 50.028879] ata2: hard resetting link [ 50.512027] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [ 50.512918] ata2.00: configured for UDMA/33 [ 50.512930] ata2: EH complete [ 50.541202] ata2.00: exception Emask 0x10 SAct 0x0 SErr 0x180000 action 0x6 frozen [ 50.541206] ata2.00: irq_stat 0x08000000, interface fatal error [ 50.541211] ata2: SError: { 10B8B Dispar } [ 50.541218] ata2.00: cmd c8/00:20:3f:00:00/00:00:00:00:00/e0 tag 0 dma 16384 in [ 50.541220] res 50/00:42:00:00:00/00:00:00:00:00/a0 Emask 0x10 (ATA bus error) [ 50.541225] ata2.00: status: { DRDY } [ 50.541231] ata2: hard resetting link [ 51.024027] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [ 51.024937] ata2.00: configured for UDMA/33 [ 51.024947] ata2: EH complete [ 51.052232] ata2.00: exception Emask 0x10 SAct 0x0 SErr 0x180000 action 0x6 frozen [ 51.052237] ata2.00: irq_stat 0x08000000, interface fatal error [ 51.052241] ata2: SError: { 10B8B Dispar } [ 51.052248] ata2.00: cmd c8/00:20:3f:00:00/00:00:00:00:00/e0 tag 0 dma 16384 in [ 51.052250] res 50/00:42:00:00:00/00:00:00:00:00/a0 Emask 0x10 (ATA bus error) [ 51.052255] ata2.00: status: { DRDY } [ 51.052260] ata2: hard resetting link [ 51.540034] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [ 51.540914] ata2.00: configured for UDMA/33 [ 51.540923] ata2: EH complete [ 51.574546] ata2.00: exception Emask 0x10 SAct 0x0 SErr 0x180000 action 0x6 frozen [ 51.574550] ata2.00: irq_stat 0x08000000, interface fatal error [ 51.574555] ata2: SError: { 10B8B Dispar } [ 51.574562] ata2.00: cmd c8/00:20:3f:00:00/00:00:00:00:00/e0 tag 0 dma 16384 in [ 51.574564] res 50/00:42:00:00:00/00:00:00:00:00/a0 Emask 0x10 (ATA bus error) [ 51.574568] ata2.00: status: { DRDY } [ 51.574573] ata2: hard resetting link [ 52.056026] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [ 52.056944] ata2.00: configured for UDMA/33 [ 52.056953] ata2: EH complete [ 52.085742] ata2.00: exception Emask 0x10 SAct 0x0 SErr 0x380000 action 0x6 frozen [ 52.085746] ata2.00: irq_stat 0x08000000, interface fatal error [ 52.085751] ata2: SError: { 10B8B Dispar BadCRC } [ 52.085758] ata2.00: cmd c8/00:20:3f:00:00/00:00:00:00:00/e0 tag 0 dma 16384 in [ 52.085760] res 50/00:42:00:00:00/00:00:00:00:00/a0 Emask 0x10 (ATA bus error) [ 52.085764] ata2.00: status: { DRDY } [ 52.085769] ata2: hard resetting link [ 52.568025] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [ 52.568907] ata2.00: configured for UDMA/33 [ 52.568916] ata2: EH complete [ 52.627330] sd 1:0:0:0: [sda] 234441648 512-byte hardware sectors: (120 GB/111 GiB) [ 52.627511] sd 1:0:0:0: [sda] Write Protect is off [ 52.627515] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 52.630371] ata2.00: exception Emask 0x10 SAct 0x0 SErr 0x180000 action 0x6 frozen [ 52.630376] ata2.00: irq_stat 0x08000000, interface fatal error [ 52.630380] ata2: SError: { 10B8B Dispar } [ 52.630388] ata2.00: cmd c8/00:08:df:f2:0a/00:00:00:00:00/ed tag 0 dma 4096 in [ 52.630390] res 50/00:00:46:f2:0a/00:00:00:00:00/ed Emask 0x10 (ATA bus error) [ 52.630394] ata2.00: status: { DRDY } [ 52.630400] ata2: hard resetting link [ 53.112026] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [ 53.112907] ata2.00: configured for UDMA/33 [ 53.112917] ata2: EH complete [ 53.119324] ata2.00: exception Emask 0x10 SAct 0x0 SErr 0x180000 action 0x6 frozen [ 53.119329] ata2.00: irq_stat 0x08000000, interface fatal error [ 53.119333] ata2: SError: { 10B8B Dispar } [ 53.119340] ata2.00: cmd c8/00:08:df:f2:0a/00:00:00:00:00/ed tag 0 dma 4096 in [ 53.119342] res 50/00:42:00:00:00/00:00:00:00:00/a0 Emask 0x10 (ATA bus error) [ 53.119346] ata2.00: status: { DRDY } [ 53.119352] ata2: hard resetting link [ 53.600025] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [ 53.600933] ata2.00: configured for UDMA/33 [ 53.600942] ata2: EH complete [ 53.608301] ata2.00: exception Emask 0x10 SAct 0x0 SErr 0x380000 action 0x6 frozen [ 53.608305] ata2.00: irq_stat 0x08000000, interface fatal error [ 53.608310] ata2: SError: { 10B8B Dispar BadCRC } [ 53.608317] ata2.00: cmd c8/00:08:df:f2:0a/00:00:00:00:00/ed tag 0 dma 4096 in [ 53.608319] res 50/00:42:00:00:00/00:00:00:00:00/a0 Emask 0x10 (ATA bus error) [ 53.608323] ata2.00: status: { DRDY } [ 53.608329] ata2: hard resetting link [ 54.092026] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [ 54.092907] ata2.00: configured for UDMA/33 [ 54.092916] ata2: EH complete [ 54.120271] ata2.00: exception Emask 0x10 SAct 0x0 SErr 0x380000 action 0x6 frozen [ 54.120276] ata2.00: irq_stat 0x08000000, interface fatal error [ 54.120280] ata2: SError: { 10B8B Dispar BadCRC } [ 54.120288] ata2.00: cmd c8/00:40:5f:00:00/00:00:00:00:00/e0 tag 0 dma 32768 in [ 54.120289] res 50/00:00:e6:f2:0a/00:00:00:00:00/ed Emask 0x10 (ATA bus error) [ 54.120294] ata2.00: status: { DRDY } [ 54.120299] ata2: hard resetting link [ 54.604025] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [ 54.604906] ata2.00: configured for UDMA/33 [ 54.604916] ata2: EH complete [ 54.642246] ata2.00: exception Emask 0x10 SAct 0x0 SErr 0x380000 action 0x6 frozen [ 54.642251] ata2.00: irq_stat 0x08000000, interface fatal error [ 54.642255] ata2: SError: { 10B8B Dispar BadCRC } [ 54.642263] ata2.00: cmd c8/00:40:5f:00:00/00:00:00:00:00/e0 tag 0 dma 32768 in [ 54.642265] res 50/00:42:00:00:00/00:00:00:00:00/a0 Emask 0x10 (ATA bus error) [ 54.642269] ata2.00: status: { DRDY } [ 54.642275] ata2: hard resetting link [ 55.124025] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [ 55.124976] ata2.00: configured for UDMA/33 [ 55.124985] ata2: EH complete [ 55.142522] ata2.00: exception Emask 0x10 SAct 0x0 SErr 0x180000 action 0x6 frozen [ 55.142526] ata2.00: irq_stat 0x08000000, interface fatal error [ 55.142531] ata2: SError: { 10B8B Dispar } [ 55.142538] ata2.00: cmd c8/00:40:5f:00:00/00:00:00:00:00/e0 tag 0 dma 32768 in [ 55.142540] res 50/00:42:00:00:00/00:00:00:00:00/a0 Emask 0x10 (ATA bus error) [ 55.142544] ata2.00: status: { DRDY } [ 55.142550] ata2: hard resetting link [ 55.624026] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [ 55.624905] ata2.00: configured for UDMA/33 [ 55.624914] ata2: EH complete [ 55.653381] ata2.00: exception Emask 0x10 SAct 0x0 SErr 0x380000 action 0x6 frozen [ 55.653385] ata2.00: irq_stat 0x08000000, interface fatal error [ 55.653389] ata2: SError: { 10B8B Dispar BadCRC } [ 55.653397] ata2.00: cmd c8/00:40:5f:00:00/00:00:00:00:00/e0 tag 0 dma 32768 in [ 55.653398] res 50/00:42:00:00:00/00:00:00:00:00/a0 Emask 0x10 (ATA bus error) [ 55.653403] ata2.00: status: { DRDY } [ 55.653409] ata2: hard resetting link [ 56.136026] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [ 56.136935] ata2.00: configured for UDMA/33 [ 56.136944] ata2: EH complete [ 56.164748] ata2.00: exception Emask 0x10 SAct 0x0 SErr 0x380000 action 0x6 frozen [ 56.164752] ata2.00: irq_stat 0x08000000, interface fatal error [ 56.164757] ata2: SError: { 10B8B Dispar BadCRC } [ 56.164764] ata2.00: cmd c8/00:40:5f:00:00/00:00:00:00:00/e0 tag 0 dma 32768 in [ 56.164766] res 50/00:42:00:00:00/00:00:00:00:00/a0 Emask 0x10 (ATA bus error) [ 56.164771] ata2.00: status: { DRDY } [ 56.164776] ata2: hard resetting link [ 56.648025] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [ 56.648974] ata2.00: configured for UDMA/33 [ 56.648983] ata2: EH complete [ 56.675779] ata2.00: exception Emask 0x10 SAct 0x0 SErr 0x380000 action 0x6 frozen [ 56.675783] ata2.00: irq_stat 0x08000000, interface fatal error [ 56.675788] ata2: SError: { 10B8B Dispar BadCRC } [ 56.675795] ata2.00: cmd c8/00:40:5f:00:00/00:00:00:00:00/e0 tag 0 dma 32768 in [ 56.675797] res 50/00:42:00:00:00/00:00:00:00:00/a0 Emask 0x10 (ATA bus error) [ 56.675801] ata2.00: status: { DRDY } [ 56.675806] ata2: hard resetting link [ 57.156026] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [ 57.156906] ata2.00: configured for UDMA/33 [ 57.156917] sd 1:0:0:0: [sda] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE,SUGGEST_OK [ 57.156922] sd 1:0:0:0: [sda] Sense Key : Aborted Command [current] [descriptor] [ 57.156931] Descriptor sense data with sense descriptors (in hex): [ 57.156935] 72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00 [ 57.156951] 00 00 00 00 [ 57.156963] sd 1:0:0:0: [sda] Add. Sense: No additional sense information [ 57.156968] end_request: I/O error, dev sda, sector 95 [ 57.156971] Buffer I/O error on device sda1, logical block 16 [ 57.156975] Buffer I/O error on device sda1, logical block 17 [ 57.156978] Buffer I/O error on device sda1, logical block 18 [ 57.156980] Buffer I/O error on device sda1, logical block 19 [ 57.156983] Buffer I/O error on device sda1, logical block 20 [ 57.156986] Buffer I/O error on device sda1, logical block 21 [ 57.156989] Buffer I/O error on device sda1, logical block 22 [ 57.156992] Buffer I/O error on device sda1, logical block 23 [ 57.156995] Buffer I/O error on device sda1, logical block 24 [ 57.156997] Buffer I/O error on device sda1, logical block 25 [ 57.157017] ata2: EH complete [ 57.157035] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 57.191463] sd 1:0:0:0: [sda] 234441648 512-byte hardware sectors: (120 GB/111 GiB) [ 57.196945] ata2.00: exception Emask 0x10 SAct 0x0 SErr 0x180000 action 0x6 frozen [ 57.196949] ata2.00: irq_stat 0x08000000, interface fatal error [ 57.196954] ata2: SError: { 10B8B Dispar } [ 57.196961] ata2.00: cmd c8/00:08:af:f2:0a/00:00:00:00:00/ed tag 0 dma 4096 in [ 57.196963] res 50/00:00:f6:f1:0a/00:00:00:00:00/ed Emask 0x10 (ATA bus error) [ 57.196967] ata2.00: status: { DRDY } [ 57.196973] ata2: hard resetting link [ 57.680025] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [ 57.680922] ata2.00: configured for UDMA/33 [ 57.680932] ata2: EH complete [ 57.685954] sd 1:0:0:0: [sda] Write Protect is off [ 57.685957] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 57.698045] ata2.00: exception Emask 0x10 SAct 0x0 SErr 0x180000 action 0x6 frozen [ 57.698049] ata2.00: irq_stat 0x08000000, interface fatal error [ 57.698054] ata2: SError: { 10B8B Dispar } [ 57.698061] ata2.00: cmd c8/00:08:e7:f2:0a/00:00:00:00:00/ed tag 0 dma 4096 in [ 57.698063] res 50/00:00:66:f1:0a/00:00:00:00:00/ed Emask 0x10 (ATA bus error) [ 57.698068] ata2.00: status: { DRDY } [ 57.698073] ata2: hard resetting link [ 58.180027] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [ 58.180924] ata2.00: configured for UDMA/33 [ 58.180933] ata2: EH complete [ 58.187018] ata2.00: exception Emask 0x10 SAct 0x0 SErr 0x180000 action 0x6 frozen [ 58.187022] ata2.00: irq_stat 0x08000000, interface fatal error [ 58.187027] ata2: SError: { 10B8B Dispar } [ 58.187034] ata2.00: cmd c8/00:08:e7:f2:0a/00:00:00:00:00/ed tag 0 dma 4096 in [ 58.187036] res 50/00:42:00:00:00/00:00:00:00:00/a0 Emask 0x10 (ATA bus error) [ 58.187040] ata2.00: status: { DRDY } [ 58.187046] ata2: hard resetting link [ 58.668026] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [ 58.668906] ata2.00: configured for UDMA/33 [ 58.668915] ata2: EH complete [ 58.675992] ata2.00: exception Emask 0x10 SAct 0x0 SErr 0x180000 action 0x6 frozen [ 58.675996] ata2.00: irq_stat 0x08000000, interface fatal error [ 58.676000] ata2: SError: { 10B8B Dispar } [ 58.676014] ata2.00: cmd c8/00:08:e7:f2:0a/00:00:00:00:00/ed tag 0 dma 4096 in [ 58.676016] res 50/00:42:00:00:00/00:00:00:00:00/a0 Emask 0x10 (ATA bus error) [ 58.676020] ata2.00: status: { DRDY } [ 58.676026] ata2: hard resetting link [ 59.160026] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [ 59.160920] ata2.00: configured for UDMA/33 [ 59.160929] ata2: EH complete [ 59.176250] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 59.209455] ata2.00: exception Emask 0x10 SAct 0x0 SErr 0x180000 action 0x6 frozen [ 59.209459] ata2.00: irq_stat 0x08000000, interface fatal error [ 59.209464] ata2: SError: { 10B8B Dispar } [ 59.209471] ata2.00: cmd c8/00:08:5f:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in [ 59.209473] res 50/00:00:ee:f2:0a/00:00:00:00:00/ed Emask 0x10 (ATA bus error) [ 59.209477] ata2.00: status: { DRDY } [ 59.209483] ata2: hard resetting link [ 59.692027] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [ 59.692944] ata2.00: configured for UDMA/33 [ 59.692954] ata2: EH complete [ 59.731769] ata2.00: exception Emask 0x10 SAct 0x0 SErr 0x380000 action 0x6 frozen [ 59.731774] ata2.00: irq_stat 0x08000000, interface fatal error [ 59.731778] ata2: SError: { 10B8B Dispar BadCRC } [ 59.731785] ata2.00: cmd c8/00:08:5f:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in [ 59.731787] res 50/00:42:00:00:00/00:00:00:00:00/a0 Emask 0x10 (ATA bus error) [ 59.731792] ata2.00: status: { DRDY } [ 59.731797] ata2: hard resetting link [ 60.212027] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [ 60.212909] ata2.00: configured for UDMA/33 [ 60.212918] ata2: EH complete [ 60.232637] ata2.00: exception Emask 0x10 SAct 0x0 SErr 0x380000 action 0x6 frozen [ 60.232641] ata2.00: irq_stat 0x08000000, interface fatal error [ 60.232646] ata2: SError: { 10B8B Dispar BadCRC } [ 60.232653] ata2.00: cmd c8/00:80:9f:00:00/00:00:00:00:00/e0 tag 0 dma 65536 in [ 60.232655] res 50/00:00:66:00:00/00:00:00:00:00/e0 Emask 0x10 (ATA bus error) [ 60.232660] ata2.00: status: { DRDY } [ 60.232666] ata2: hard resetting link [ 60.716026] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [ 60.716935] ata2.00: configured for UDMA/33 [ 60.716944] ata2: EH complete [ 60.744170] ata2.00: exception Emask 0x10 SAct 0x0 SErr 0x180000 action 0x6 frozen [ 60.744174] ata2.00: irq_stat 0x08000000, interface fatal error [ 60.744178] ata2: SError: { 10B8B Dispar } [ 60.744185] ata2.00: cmd c8/00:80:9f:00:00/00:00:00:00:00/e0 tag 0 dma 65536 in [ 60.744187] res 50/00:42:00:00:00/00:00:00:00:00/a0 Emask 0x10 (ATA bus error) [ 60.744192] ata2.00: status: { DRDY } [ 60.744197] ata2: hard resetting link [ 61.228026] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [ 61.228906] ata2.00: configured for UDMA/33 [ 61.228914] ata2: EH complete [ 61.255029] ata2.00: exception Emask 0x10 SAct 0x0 SErr 0x180000 action 0x6 frozen [ 61.255033] ata2.00: irq_stat 0x08000000, interface fatal error [ 61.255037] ata2: SError: { 10B8B Dispar } [ 61.255044] ata2.00: cmd c8/00:80:9f:00:00/00:00:00:00:00/e0 tag 0 dma 65536 in [ 61.255046] res 50/00:42:00:00:00/00:00:00:00:00/a0 Emask 0x10 (ATA bus error) [ 61.255051] ata2.00: status: { DRDY } [ 61.255056] ata2: hard resetting link [ 61.736026] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [ 61.736906] ata2.00: configured for UDMA/33 [ 61.736914] ata2: EH complete [ 61.766225] ata2.00: exception Emask 0x10 SAct 0x0 SErr 0x380000 action 0x6 frozen [ 61.766229] ata2.00: irq_stat 0x08000000, interface fatal error [ 61.766234] ata2: SError: { 10B8B Dispar BadCRC } [ 61.766241] ata2.00: cmd c8/00:80:9f:00:00/00:00:00:00:00/e0 tag 0 dma 65536 in [ 61.766243] res 50/00:42:00:00:00/00:00:00:00:00/a0 Emask 0x10 (ATA bus error) [ 61.766247] ata2.00: status: { DRDY } [ 61.766253] ata2: hard resetting link [ 62.248026] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [ 62.248907] ata2.00: configured for UDMA/33 [ 62.248915] ata2: EH complete [ 62.277424] ata2.00: exception Emask 0x10 SAct 0x0 SErr 0x180000 action 0x6 frozen [ 62.277429] ata2.00: irq_stat 0x08000000, interface fatal error [ 62.277433] ata2: SError: { 10B8B Dispar } [ 62.277440] ata2.00: cmd c8/00:80:9f:00:00/00:00:00:00:00/e0 tag 0 dma 65536 in [ 62.277442] res 50/00:42:00:00:00/00:00:00:00:00/a0 Emask 0x10 (ATA bus error) [ 62.277446] ata2.00: status: { DRDY } [ 62.277452] ata2: hard resetting link [ 62.760025] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [ 62.760944] ata2.00: configured for UDMA/33 [ 62.760953] ata2: EH complete [ 62.788624] ata2.00: exception Emask 0x10 SAct 0x0 SErr 0x180000 action 0x6 frozen [ 62.788628] ata2.00: irq_stat 0x08000000, interface fatal error [ 62.788633] ata2: SError: { 10B8B Dispar } [ 62.788639] ata2.00: cmd c8/00:80:9f:00:00/00:00:00:00:00/e0 tag 0 dma 65536 in [ 62.788641] res 50/00:42:00:00:00/00:00:00:00:00/a0 Emask 0x10 (ATA bus error) [ 62.788646] ata2.00: status: { DRDY } [ 62.788652] ata2: hard resetting link [ 63.272026] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [ 63.272973] ata2.00: configured for UDMA/33 [ 63.272983] sd 1:0:0:0: [sda] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE,SUGGEST_OK [ 63.272989] sd 1:0:0:0: [sda] Sense Key : Aborted Command [current] [descriptor] [ 63.272997] Descriptor sense data with sense descriptors (in hex): [ 63.273001] 72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00 [ 63.273018] 00 00 00 00 [ 63.273029] sd 1:0:0:0: [sda] Add. Sense: No additional sense information [ 63.273034] end_request: I/O error, dev sda, sector 159 [ 63.273037] __ratelimit: 22 callbacks suppressed [ 63.273040] Buffer I/O error on device sda1, logical block 48 [ 63.273043] Buffer I/O error on device sda1, logical block 49 [ 63.273046] Buffer I/O error on device sda1, logical block 50 [ 63.273048] Buffer I/O error on device sda1, logical block 51 [ 63.273051] Buffer I/O error on device sda1, logical block 52 [ 63.273054] Buffer I/O error on device sda1, logical block 53 [ 63.273056] Buffer I/O error on device sda1, logical block 54 [ 63.273059] Buffer I/O error on device sda1, logical block 55 [ 63.273062] Buffer I/O error on device sda1, logical block 56 [ 63.273064] Buffer I/O error on device sda1, logical block 57 [ 63.273100] ata2: EH complete [ 63.273119] sd 1:0:0:0: [sda] 234441648 512-byte hardware sectors: (120 GB/111 GiB) [ 63.298516] sd 1:0:0:0: [sda] Write Protect is off [ 63.298519] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 63.298552] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 63.298579] sd 1:0:0:0: [sda] 234441648 512-byte hardware sectors: (120 GB/111 GiB) [ 63.298592] sd 1:0:0:0: [sda] Write Protect is off [ 63.298595] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 63.298618] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 63.472432] lp: driver loaded but no devices found [ 63.579692] Adding 1646620k swap on /dev/sdc5. Priority:-1 extents:1 across:1646620k [ 64.134046] EXT3 FS on sdc1, internal journal [ 68.276791] ata2.00: exception Emask 0x10 SAct 0x0 SErr 0x180000 action 0x6 frozen [ 68.276797] ata2.00: irq_stat 0x08000000, interface fatal error [ 68.276800] ata2: SError: { 10B8B Dispar } [ 68.276805] ata2.00: cmd c8/00:20:00:00:00/00:00:00:00:00/e0 tag 0 dma 16384 in [ 68.276806] res 50/00:00:46:00:60/00:00:00:00:00/e0 Emask 0x10 (ATA bus error) [ 68.276809] ata2.00: status: { DRDY } [ 68.276815] ata2: hard resetting link [ 68.760030] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [ 68.760925] ata2.00: configured for UDMA/33 [ 68.760938] ata2: EH complete [ 68.788157] ata2.00: exception Emask 0x10 SAct 0x0 SErr 0x180000 action 0x6 frozen [ 68.788162] ata2.00: irq_stat 0x08000000, interface fatal error [ 68.788167] ata2: SError: { 10B8B Dispar } [ 68.788174] ata2.00: cmd c8/00:20:00:00:00/00:00:00:00:00/e0 tag 0 dma 16384 in [ 68.788176] res 50/00:42:00:00:00/00:00:00:00:00/a0 Emask 0x10 (ATA bus error) [ 68.788181] ata2.00: status: { DRDY } [ 68.788187] ata2: hard resetting link [ 69.272027] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [ 69.272912] ata2.00: configured for UDMA/33 [ 69.272923] ata2: EH complete [ 69.299182] ata2.00: exception Emask 0x10 SAct 0x0 SErr 0x380000 action 0x6 frozen [ 69.299188] ata2.00: irq_stat 0x08000000, interface fatal error [ 69.299193] ata2: SError: { 10B8B Dispar BadCRC } [ 69.299200] ata2.00: cmd c8/00:20:00:00:00/00:00:00:00:00/e0 tag 0 dma 16384 in [ 69.299202] res 50/00:42:00:00:00/00:00:00:00:00/a0 Emask 0x10 (ATA bus error) [ 69.299207] ata2.00: status: { DRDY } [ 69.299213] ata2: hard resetting link [ 69.780028] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [ 69.780996] ata2.00: configured for UDMA/33 [ 69.781007] ata2: EH complete [ 69.810381] ata2.00: exception Emask 0x10 SAct 0x0 SErr 0x180000 action 0x6 frozen [ 69.810387] ata2.00: irq_stat 0x08000000, interface fatal error [ 69.810391] ata2: SError: { 10B8B Dispar } [ 69.810399] ata2.00: cmd c8/00:20:00:00:00/00:00:00:00:00/e0 tag 0 dma 16384 in [ 69.810401] res 50/00:42:00:00:00/00:00:00:00:00/a0 Emask 0x10 (ATA bus error) [ 69.810405] ata2.00: status: { DRDY } [ 69.810412] ata2: hard resetting link [ 70.292028] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [ 70.292911] ata2.00: configured for UDMA/33 [ 70.292921] ata2: EH complete [ 70.321583] ata2.00: exception Emask 0x10 SAct 0x0 SErr 0x380000 action 0x6 frozen [ 70.321588] ata2.00: irq_stat 0x08000000, interface fatal error [ 70.321593] ata2: SError: { 10B8B Dispar BadCRC } [ 70.321600] ata2.00: cmd c8/00:20:00:00:00/00:00:00:00:00/e0 tag 0 dma 16384 in [ 70.321602] res 50/00:42:00:00:00/00:00:00:00:00/a0 Emask 0x10 (ATA bus error) [ 70.321606] ata2.00: status: { DRDY } [ 70.321612] ata2: hard resetting link [ 70.804026] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [ 70.804907] ata2.00: configured for UDMA/33 [ 70.804917] ata2: EH complete [ 70.843896] ata2.00: exception Emask 0x10 SAct 0x0 SErr 0x380000 action 0x6 frozen [ 70.843900] ata2.00: irq_stat 0x08000000, interface fatal error [ 70.843905] ata2: SError: { 10B8B Dispar BadCRC } [ 70.843913] ata2.00: cmd c8/00:20:00:00:00/00:00:00:00:00/e0 tag 0 dma 16384 in [ 70.843914] res 50/00:42:00:00:00/00:00:00:00:00/a0 Emask 0x10 (ATA bus error) [ 70.843919] ata2.00: status: { DRDY } [ 70.843924] ata2: hard resetting link [ 71.324026] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [ 71.324908] ata2.00: configured for UDMA/33 [ 71.324919] sd 1:0:0:0: [sda] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE,SUGGEST_OK [ 71.324925] sd 1:0:0:0: [sda] Sense Key : Aborted Command [current] [descriptor] [ 71.324933] Descriptor sense data with sense descriptors (in hex): [ 71.324937] 72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00 [ 71.324954] 00 00 00 00 [ 71.324966] sd 1:0:0:0: [sda] Add. Sense: No additional sense information [ 71.324971] end_request: I/O error, dev sda, sector 0 [ 71.324974] __ratelimit: 78 callbacks suppressed [ 71.324976] Buffer I/O error on device sda, logical block 0 [ 71.324982] Buffer I/O error on device sda, logical block 1 [ 71.324985] Buffer I/O error on device sda, logical block 2 [ 71.324988] Buffer I/O error on device sda, logical block 3 [ 71.324997] ata2: EH complete [ 71.355211] sd 1:0:0:0: [sda] 234441648 512-byte hardware sectors: (120 GB/111 GiB) [ 71.355242] sd 1:0:0:0: [sda] Write Protect is off [ 71.355245] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 71.355271] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 71.355302] sd 1:0:0:0: [sda] 234441648 512-byte hardware sectors: (120 GB/111 GiB) [ 71.355316] sd 1:0:0:0: [sda] Write Protect is off [ 71.355318] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 71.355342] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 71.479969] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 71.479971] Bluetooth: BNEP filters: protocol multicast [ 71.492175] Bridge firewalling registered [ 73.044424] ppdev: user-space parallel port driver [ 74.499507] ata2.00: exception Emask 0x10 SAct 0x0 SErr 0x180000 action 0x6 frozen [ 74.499514] ata2.00: irq_stat 0x08000000, interface fatal error [ 74.499517] ata2: SError: { 10B8B Dispar } [ 74.499522] ata2.00: cmd c8/00:08:00:4b:f9/00:00:00:00:00/ed tag 0 dma 4096 in [ 74.499523] res 50/00:00:1f:00:00/00:00:00:00:00/e0 Emask 0x10 (ATA bus error) [ 74.499526] ata2.00: status: { DRDY } [ 74.499532] ata2: hard resetting link [ 74.980035] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [ 74.980930] ata2.00: configured for UDMA/33 [ 74.980942] ata2: EH complete [ 75.010701] ata2.00: exception Emask 0x10 SAct 0x0 SErr 0x380000 action 0x6 frozen [ 75.010707] ata2.00: irq_stat 0x08000000, interface fatal error [ 75.010712] ata2: SError: { 10B8B Dispar BadCRC } [ 75.010720] ata2.00: cmd c8/00:08:00:4b:f9/00:00:00:00:00/ed tag 0 dma 4096 in [ 75.010722] res 50/00:42:00:00:00/00:00:00:00:00/a0 Emask 0x10 (ATA bus error) [ 75.010726] ata2.00: status: { DRDY } [ 75.010733] ata2: hard resetting link [ 75.492065] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [ 75.493035] ata2.00: configured for UDMA/33 [ 75.493049] ata2: EH complete [ 75.525442] sd 1:0:0:0: [sda] 234441648 512-byte hardware sectors: (120 GB/111 GiB) [ 75.556170] ata2.00: exception Emask 0x10 SAct 0x0 SErr 0x380000 action 0x6 frozen [ 75.556177] ata2.00: irq_stat 0x08000000, interface fatal error [ 75.556182] ata2: SError: { 10B8B Dispar BadCRC } [ 75.556190] ata2.00: cmd c8/00:40:20:00:00/00:00:00:00:00/e0 tag 0 dma 32768 in [ 75.556192] res 50/00:00:a7:4b:f9/00:00:00:00:00/ed Emask 0x10 (ATA bus error) [ 75.556196] ata2.00: status: { DRDY } [ 75.556203] ata2: hard resetting link [ 76.040022] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [ 76.040915] ata2.00: configured for UDMA/33 [ 76.040931] ata2: EH complete [ 76.078477] ata2.00: exception Emask 0x10 SAct 0x0 SErr 0x380000 action 0x6 frozen [ 76.078484] ata2.00: irq_stat 0x08000000, interface fatal error [ 76.078488] ata2: SError: { 10B8B Dispar BadCRC } [ 76.078496] ata2.00: cmd c8/00:40:20:00:00/00:00:00:00:00/e0 tag 0 dma 32768 in [ 76.078498] res 50/00:42:00:00:00/00:00:00:00:00/a0 Emask 0x10 (ATA bus error) [ 76.078503] ata2.00: status: { DRDY } [ 76.078509] ata2: hard resetting link [ 76.560025] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [ 76.560916] ata2.00: configured for UDMA/33 [ 76.560931] ata2: EH complete [ 76.600958] ata2.00: exception Emask 0x10 SAct 0x0 SErr 0x380000 action 0x6 frozen [ 76.600964] ata2.00: irq_stat 0x08000000, interface fatal error [ 76.600969] ata2: SError: { 10B8B Dispar BadCRC } [ 76.600976] ata2.00: cmd c8/00:40:20:00:00/00:00:00:00:00/e0 tag 0 dma 32768 in [ 76.600978] res 50/00:42:00:00:00/00:00:00:00:00/a0 Emask 0x10 (ATA bus error) [ 76.600987] ata2.00: status: { DRDY } [ 76.600992] ata2: hard resetting link [ 77.084041] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [ 77.084932] ata2.00: configured for UDMA/33 [ 77.084947] ata2: EH complete [ 77.109488] forcedeth 0000:00:0f.0: irq 2299 for MSI/MSI-X [ 77.123107] ata2.00: exception Emask 0x10 SAct 0x0 SErr 0x180000 action 0x6 frozen [ 77.123114] ata2.00: irq_stat 0x08000000, interface fatal error [ 77.123119] ata2: SError: { 10B8B Dispar } [ 77.123127] ata2.00: cmd c8/00:40:20:00:00/00:00:00:00:00/e0 tag 0 dma 32768 in [ 77.123129] res 50/00:42:00:00:00/00:00:00:00:00/a0 Emask 0x10 (ATA bus error) [ 77.123133] ata2.00: status: { DRDY } [ 77.123141] ata2: hard resetting link [ 77.604032] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [ 77.604926] ata2.00: configured for UDMA/33 [ 77.604942] ata2: EH complete [ 77.645421] ata2.00: exception Emask 0x10 SAct 0x0 SErr 0x180000 action 0x6 frozen [ 77.645427] ata2.00: irq_stat 0x08000000, interface fatal error [ 77.645432] ata2: SError: { 10B8B Dispar } [ 77.645440] ata2.00: cmd c8/00:40:20:00:00/00:00:00:00:00/e0 tag 0 dma 32768 in [ 77.645442] res 50/00:42:00:00:00/00:00:00:00:00/a0 Emask 0x10 (ATA bus error) [ 77.645446] ata2.00: status: { DRDY } [ 77.645454] ata2: hard resetting link [ 78.128021] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [ 78.128868] ata2.00: configured for UDMA/33 [ 78.128884] ata2: EH complete [ 78.145525] ata2.00: exception Emask 0x10 SAct 0x0 SErr 0x180000 action 0x6 frozen [ 78.145529] ata2.00: irq_stat 0x08000000, interface fatal error [ 78.145532] ata2: SError: { 10B8B Dispar } [ 78.145538] ata2.00: cmd c8/00:40:20:00:00/00:00:00:00:00/e0 tag 0 dma 32768 in [ 78.145539] res 50/00:42:00:00:00/00:00:00:00:00/a0 Emask 0x10 (ATA bus error) [ 78.145541] ata2.00: status: { DRDY } [ 78.145546] ata2: hard resetting link [ 78.628034] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [ 78.628924] ata2.00: configured for UDMA/33 [ 78.628941] sd 1:0:0:0: [sda] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE,SUGGEST_OK [ 78.628948] sd 1:0:0:0: [sda] Sense Key : Aborted Command [current] [descriptor] [ 78.628956] Descriptor sense data with sense descriptors (in hex): [ 78.628960] 72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00 [ 78.628982] 00 00 00 00 [ 78.628986] sd 1:0:0:0: [sda] Add. Sense: No additional sense information [ 78.628991] end_request: I/O error, dev sda, sector 32 [ 78.628996] Buffer I/O error on device sda, logical block 4 [ 78.628999] Buffer I/O error on device sda, logical block 5 [ 78.629002] Buffer I/O error on device sda, logical block 6 [ 78.629005] Buffer I/O error on device sda, logical block 7 [ 78.629008] Buffer I/O error on device sda, logical block 8 [ 78.629011] Buffer I/O error on device sda, logical block 9 [ 78.629014] Buffer I/O error on device sda, logical block 10 [ 78.629017] Buffer I/O error on device sda, logical block 11 [ 78.629028] ata2: EH complete [ 78.629059] sd 1:0:0:0: [sda] Write Protect is off [ 78.629061] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 78.676134] ata2.00: exception Emask 0x10 SAct 0x0 SErr 0x180000 action 0x6 frozen [ 78.676139] ata2.00: irq_stat 0x08000000, interface fatal error [ 78.676142] ata2: SError: { 10B8B Dispar } [ 78.676147] ata2.00: cmd c8/00:08:a8:4a:f9/00:00:00:00:00/ed tag 0 dma 4096 in [ 78.676148] res 50/00:00:af:4b:f9/00:00:00:00:00/ed Emask 0x10 (ATA bus error) [ 78.676151] ata2.00: status: { DRDY } [ 78.676157] ata2: hard resetting link [ 79.160037] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [ 79.160933] ata2.00: configured for UDMA/33 [ 79.160948] ata2: EH complete [ 79.198439] ata2.00: exception Emask 0x10 SAct 0x0 SErr 0x180000 action 0x6 frozen [ 79.198445] ata2.00: irq_stat 0x08000000, interface fatal error [ 79.198450] ata2: SError: { 10B8B Dispar } [ 79.198458] ata2.00: cmd c8/00:08:a8:4a:f9/00:00:00:00:00/ed tag 0 dma 4096 in [ 79.198460] res 50/00:42:00:00:00/00:00:00:00:00/a0 Emask 0x10 (ATA bus error) [ 79.198464] ata2.00: status: { DRDY } [ 79.198472] ata2: hard resetting link [ 79.680039] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [ 79.680936] ata2.00: configured for UDMA/33 [ 79.680952] ata2: EH complete [ 79.720753] ata2.00: exception Emask 0x10 SAct 0x0 SErr 0x180000 action 0x6 frozen [ 79.720760] ata2.00: irq_stat 0x08000000, interface fatal error [ 79.720764] ata2: SError: { 10B8B Dispar } [ 79.720772] ata2.00: cmd c8/00:08:a8:4a:f9/00:00:00:00:00/ed tag 0 dma 4096 in [ 79.720774] res 50/00:42:00:00:00/00:00:00:00:00/a0 Emask 0x10 (ATA bus error) [ 79.720778] ata2.00: status: { DRDY } [ 79.720785] ata2: hard resetting link [ 80.204067] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [ 80.204957] ata2.00: configured for UDMA/33 [ 80.204972] ata2: EH complete [ 80.243064] ata2.00: exception Emask 0x10 SAct 0x0 SErr 0x380000 action 0x6 frozen [ 80.243070] ata2.00: irq_stat 0x08000000, interface fatal error [ 80.243075] ata2: SError: { 10B8B Dispar BadCRC } [ 80.243083] ata2.00: cmd c8/00:08:a8:4a:f9/00:00:00:00:00/ed tag 0 dma 4096 in [ 80.243085] res 50/00:42:00:00:00/00:00:00:00:00/a0 Emask 0x10 (ATA bus error) [ 80.243089] ata2.00: status: { DRDY } [ 80.243096] ata2: hard resetting link [ 80.724041] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [ 80.724955] ata2.00: configured for UDMA/33 [ 80.724969] ata2: EH complete [ 80.754263] ata2.00: exception Emask 0x10 SAct 0x0 SErr 0x180000 action 0x6 frozen [ 80.754269] ata2.00: irq_stat 0x08000000, interface fatal error [ 80.754274] ata2: SError: { 10B8B Dispar } [ 80.754282] ata2.00: cmd c8/00:08:a8:4a:f9/00:00:00:00:00/ed tag 0 dma 4096 in [ 80.754284] res 50/00:42:00:00:00/00:00:00:00:00/a0 Emask 0x10 (ATA bus error) [ 80.754288] ata2.00: status: { DRDY } [ 80.754295] ata2: hard resetting link [ 81.236043] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [ 81.236889] ata2.00: configured for UDMA/33 [ 81.236908] ata2: EH complete [ 81.265533] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 81.269781] ata2.00: exception Emask 0x10 SAct 0x0 SErr 0x180000 action 0x6 frozen [ 81.269788] ata2.00: irq_stat 0x08000000, interface fatal error [ 81.269793] ata2: SError: { 10B8B Dispar } [ 81.269801] ata2.00: cmd c8/00:08:70:4b:f9/00:00:00:00:00/ed tag 0 dma 4096 in [ 81.269803] res 50/00:00:af:4a:f9/00:00:00:00:00/ed Emask 0x10 (ATA bus error) [ 81.269807] ata2.00: status: { DRDY } [ 81.269814] ata2: hard resetting link [ 81.752034] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [ 81.752928] ata2.00: configured for UDMA/33 [ 81.752947] ata2: EH complete [ 81.780975] ata2.00: exception Emask 0x10 SAct 0x0 SErr 0x180000 action 0x6 frozen [ 81.780980] ata2.00: irq_stat 0x08000000, interface fatal error [ 81.780985] ata2: SError: { 10B8B Dispar } [ 81.780993] ata2.00: cmd c8/00:08:70:4b:f9/00:00:00:00:00/ed tag 0 dma 4096 in [ 81.780995] res 50/00:42:00:00:00/00:00:00:00:00/a0 Emask 0x10 (ATA bus error) [ 81.780999] ata2.00: status: { DRDY } [ 81.781006] ata2: hard resetting link [ 82.264034] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [ 82.264932] ata2.00: configured for UDMA/33 [ 82.264952] ata2: EH complete [ 82.292175] ata2.00: exception Emask 0x10 SAct 0x0 SErr 0x180000 action 0x6 frozen [ 82.292180] ata2.00: irq_stat 0x08000000, interface fatal error [ 82.292185] ata2: SError: { 10B8B Dispar } [ 82.292193] ata2.00: cmd c8/00:08:70:4b:f9/00:00:00:00:00/ed tag 0 dma 4096 in [ 82.292195] res 50/00:42:00:00:00/00:00:00:00:00/a0 Emask 0x10 (ATA bus error) [ 82.292200] ata2.00: status: { DRDY } [ 82.292206] ata2: hard resetting link [ 82.776032] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [ 82.776920] ata2.00: configured for UDMA/33 [ 82.776936] ata2: EH complete [ 82.803374] ata2.00: exception Emask 0x10 SAct 0x0 SErr 0x180000 action 0x6 frozen [ 82.803380] ata2.00: irq_stat 0x08000000, interface fatal error [ 82.803384] ata2: SError: { 10B8B Dispar } [ 82.803392] ata2.00: cmd c8/00:08:70:4b:f9/00:00:00:00:00/ed tag 0 dma 4096 in [ 82.803394] res 50/00:42:00:00:00/00:00:00:00:00/a0 Emask 0x10 (ATA bus error) [ 82.803399] ata2.00: status: { DRDY } [ 82.803405] ata2: hard resetting link [ 83.284033] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [ 83.284922] ata2.00: configured for UDMA/33 [ 83.284940] ata2: EH complete [ 83.314468] ata2.00: exception Emask 0x10 SAct 0x0 SErr 0x180000 action 0x6 frozen [ 83.314473] ata2.00: irq_stat 0x08000000, interface fatal error [ 83.314478] ata2: SError: { 10B8B Dispar } [ 83.314485] ata2.00: cmd c8/00:08:70:4b:f9/00:00:00:00:00/ed tag 0 dma 4096 in [ 83.314487] res 50/00:42:00:00:00/00:00:00:00:00/a0 Emask 0x10 (ATA bus error) [ 83.314492] ata2.00: status: { DRDY } [ 83.314499] ata2: hard resetting link [ 83.796026] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [ 83.796976] ata2.00: configured for UDMA/33 [ 83.796995] ata2: EH complete [ 83.825419] ata2.00: exception Emask 0x10 SAct 0x0 SErr 0x180000 action 0x6 frozen [ 83.825425] ata2.00: irq_stat 0x08000000, interface fatal error [ 83.825430] ata2: SError: { 10B8B Dispar } [ 83.825438] ata2.00: cmd c8/00:08:70:4b:f9/00:00:00:00:00/ed tag 0 dma 4096 in [ 83.825439] res 50/00:42:00:00:00/00:00:00:00:00/a0 Emask 0x10 (ATA bus error) [ 83.825444] ata2.00: status: { DRDY } [ 83.825451] ata2: hard resetting link [ 84.308031] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [ 84.308919] ata2.00: configured for UDMA/33 [ 84.308938] sd 1:0:0:0: [sda] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE,SUGGEST_OK [ 84.308944] sd 1:0:0:0: [sda] Sense Key : Aborted Command [current] [descriptor] [ 84.308952] Descriptor sense data with sense descriptors (in hex): [ 84.308956] 72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00 [ 84.308978] 00 00 00 00 [ 84.308982] sd 1:0:0:0: [sda] Add. Sense: No additional sense information [ 84.308987] end_request: I/O error, dev sda, sector 234441584 [ 84.308992] Buffer I/O error on device sda, logical block 29305198 [ 84.309010] ata2: EH complete [ 84.336488] sd 1:0:0:0: [sda] 234441648 512-byte hardware sectors: (120 GB/111 GiB) [ 84.368086] ata2.00: exception Emask 0x10 SAct 0x0 SErr 0x380000 action 0x6 frozen [ 84.368091] ata2.00: irq_stat 0x09000000, interface fatal error [ 84.368096] ata2: SError: { 10B8B Dispar BadCRC } [ 84.368103] ata2.00: cmd c8/00:08:20:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in [ 84.368105] res 50/00:00:77:4b:f9/00:00:00:00:00/ed Emask 0x10 (ATA bus error) [ 84.368110] ata2.00: status: { DRDY } [ 84.368117] ata2: hard resetting link [ 84.852022] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [ 84.852904] ata2.00: configured for UDMA/33 [ 84.852915] ata2: EH complete [ 84.890447] sd 1:0:0:0: [sda] Write Protect is off [ 84.890451] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 84.890896] ata2.00: exception Emask 0x10 SAct 0x0 SErr 0x180000 action 0x6 frozen [ 84.890901] ata2.00: irq_stat 0x08000000, interface fatal error [ 84.890906] ata2: SError: { 10B8B Dispar } [ 84.890913] ata2.00: cmd c8/00:40:60:00:00/00:00:00:00:00/e0 tag 0 dma 32768 in [ 84.890915] res 50/00:00:27:00:00/00:00:00:00:00/e0 Emask 0x10 (ATA bus error) [ 84.890920] ata2.00: status: { DRDY } [ 84.890927] ata2: hard resetting link [ 85.372034] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [ 85.372924] ata2.00: configured for UDMA/33 [ 85.372943] ata2: EH complete [ 85.412953] ata2.00: exception Emask 0x10 SAct 0x0 SErr 0x180000 action 0x6 frozen [ 85.412958] ata2.00: irq_stat 0x08000000, interface fatal error [ 85.412963] ata2: SError: { 10B8B Dispar } [ 85.412971] ata2.00: cmd c8/00:40:60:00:00/00:00:00:00:00/e0 tag 0 dma 32768 in [ 85.412973] res 50/00:42:00:00:00/00:00:00:00:00/a0 Emask 0x10 (ATA bus error) [ 85.412977] ata2.00: status: { DRDY } [ 85.412985] ata2: hard resetting link [ 85.896022] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [ 85.896906] ata2.00: configured for UDMA/33 [ 85.896920] ata2: EH complete [ 85.934996] ata2.00: exception Emask 0x10 SAct 0x0 SErr 0x180000 action 0x6 frozen [ 85.935001] ata2.00: irq_stat 0x08000000, interface fatal error [ 85.935006] ata2: SError: { 10B8B Dispar } [ 85.935013] ata2.00: cmd c8/00:40:60:00:00/00:00:00:00:00/e0 tag 0 dma 32768 in [ 85.935015] res 50/00:42:00:00:00/00:00:00:00:00/a0 Emask 0x10 (ATA bus error) [ 85.935019] ata2.00: status: { DRDY } [ 85.935025] ata2: hard resetting link [ 86.416029] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [ 86.416980] ata2.00: configured for UDMA/33 [ 86.416998] ata2: EH complete [ 86.457050] ata2.00: exception Emask 0x10 SAct 0x0 SErr 0x380000 action 0x6 frozen [ 86.457055] ata2.00: irq_stat 0x08000000, interface fatal error [ 86.457060] ata2: SError: { 10B8B Dispar BadCRC } [ 86.457068] ata2.00: cmd c8/00:40:60:00:00/00:00:00:00:00/e0 tag 0 dma 32768 in [ 86.457070] res 50/00:42:00:00:00/00:00:00:00:00/a0 Emask 0x10 (ATA bus error) [ 86.457074] ata2.00: status: { DRDY } [ 86.457081] ata2: hard resetting link [ 86.940024] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [ 86.940915] ata2.00: configured for UDMA/33 [ 86.940933] ata2: EH complete [ 86.979103] ata2.00: exception Emask 0x10 SAct 0x0 SErr 0x380000 action 0x6 frozen [ 86.979108] ata2.00: irq_stat 0x08000000, interface fatal error [ 86.979113] ata2: SError: { 10B8B Dispar BadCRC } [ 86.979121] ata2.00: cmd c8/00:40:60:00:00/00:00:00:00:00/e0 tag 0 dma 32768 in [ 86.979123] res 50/00:42:00:00:00/00:00:00:00:00/a0 Emask 0x10 (ATA bus error) [ 86.979127] ata2.00: status: { DRDY } [ 86.979134] ata2: hard resetting link [ 87.460031] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [ 87.460919] ata2.00: configured for UDMA/33 [ 87.460937] ata2: EH complete [ 87.501159] ata2.00: exception Emask 0x10 SAct 0x0 SErr 0x380000 action 0x6 frozen [ 87.501164] ata2.00: irq_stat 0x08000000, interface fatal error [ 87.501169] ata2: SError: { 10B8B Dispar BadCRC } [ 87.501177] ata2.00: cmd c8/00:40:60:00:00/00:00:00:00:00/e0 tag 0 dma 32768 in [ 87.501179] res 50/00:42:00:00:00/00:00:00:00:00/a0 Emask 0x10 (ATA bus error) [ 87.501183] ata2.00: status: { DRDY } [ 87.501189] ata2: hard resetting link [ 87.984027] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [ 87.984917] ata2.00: configured for UDMA/33 [ 87.984937] sd 1:0:0:0: [sda] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE,SUGGEST_OK [ 87.984943] sd 1:0:0:0: [sda] Sense Key : Aborted Command [current] [descriptor] [ 87.984952] Descriptor sense data with sense descriptors (in hex): [ 87.984956] 72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00 [ 87.984977] 00 00 00 00 [ 87.984981] sd 1:0:0:0: [sda] Add. Sense: No additional sense information [ 87.984986] end_request: I/O error, dev sda, sector 96 [ 87.984991] Buffer I/O error on device sda, logical block 12 [ 87.984998] Buffer I/O error on device sda, logical block 13 [ 87.985001] Buffer I/O error on device sda, logical block 14 [ 87.985004] Buffer I/O error on device sda, logical block 15 [ 87.985007] Buffer I/O error on device sda, logical block 16 [ 87.985010] Buffer I/O error on device sda, logical block 17 [ 87.985012] Buffer I/O error on device sda, logical block 18 [ 87.985015] Buffer I/O error on device sda, logical block 19 [ 87.985031] ata2: EH complete [ 87.985323] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 87.985358] sd 1:0:0:0: [sda] 234441648 512-byte hardware sectors: (120 GB/111 GiB) [ 87.985374] sd 1:0:0:0: [sda] Write Protect is off [ 87.985376] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 87.985400] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 88.100039] eth1: no IPv6 routers present [ 176.491728] sd 7:0:0:3: [sdg] 7876608 512-byte hardware sectors: (4.03 GB/3.75 GiB) [ 176.493721] sd 7:0:0:3: [sdg] Write Protect is off [ 176.493726] sd 7:0:0:3: [sdg] Mode Sense: 03 00 00 00 [ 176.493730] sd 7:0:0:3: [sdg] Assuming drive cache: write through [ 176.494341] sd 7:0:0:3: [sdg] 7876608 512-byte hardware sectors: (4.03 GB/3.75 GiB) [ 176.497074] sd 7:0:0:3: [sdg] Write Protect is off [ 176.497078] sd 7:0:0:3: [sdg] Mode Sense: 03 00 00 00 [ 176.497080] sd 7:0:0:3: [sdg] Assuming drive cache: write through [ 176.497086] sdg: sdg1 [ 2343.534194] mtrr: no MTRR for d0000000,4000000 found [ 4584.493139] sd 7:0:0:3: [sdg] 7876608 512-byte hardware sectors: (4.03 GB/3.75 GiB) [ 4584.495506] sd 7:0:0:3: [sdg] Write Protect is off [ 4584.495510] sd 7:0:0:3: [sdg] Mode Sense: 03 00 00 00 [ 4584.495514] sd 7:0:0:3: [sdg] Assuming drive cache: write through [ 4584.496800] sd 7:0:0:3: [sdg] 7876608 512-byte hardware sectors: (4.03 GB/3.75 GiB) [ 4584.498530] sd 7:0:0:3: [sdg] Write Protect is off [ 4584.498534] sd 7:0:0:3: [sdg] Mode Sense: 03 00 00 00 [ 4584.498538] sd 7:0:0:3: [sdg] Assuming drive cache: write through [ 4584.498544] sdg: sdg1 [ 4904.680159] Too big adjustment 32 [ 4904.735945] Too big adjustment 32 [ 4908.072438] Too big adjustment 32 [ 4908.134034] Too big adjustment 32 [ 5096.789580] ata2.00: exception Emask 0x10 SAct 0x0 SErr 0x380000 action 0x6 frozen [ 5096.789587] ata2.00: irq_stat 0x08000000, interface fatal error [ 5096.789592] ata2: SError: { 10B8B Dispar BadCRC } [ 5096.789601] ata2.00: cmd c8/00:20:00:00:00/00:00:00:00:00/e0 tag 0 dma 16384 in [ 5096.789603] res 50/00:42:00:00:00/00:00:00:00:00/a0 Emask 0x10 (ATA bus error) [ 5096.789607] ata2.00: status: { DRDY } [ 5096.789614] ata2: hard resetting link [ 5097.272039] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [ 5097.273006] ata2.00: configured for UDMA/33 [ 5097.273022] ata2: EH complete [ 5097.289681] ata2.00: exception Emask 0x10 SAct 0x0 SErr 0x180000 action 0x6 frozen [ 5097.289687] ata2.00: irq_stat 0x08000000, interface fatal error [ 5097.289692] ata2: SError: { 10B8B Dispar } [ 5097.289700] ata2.00: cmd c8/00:20:00:00:00/00:00:00:00:00/e0 tag 0 dma 16384 in [ 5097.289702] res 50/00:42:00:00:00/00:00:00:00:00/a0 Emask 0x10 (ATA bus error) [ 5097.289706] ata2.00: status: { DRDY } [ 5097.289713] ata2: hard resetting link [ 5097.772034] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [ 5097.772931] ata2.00: configured for UDMA/33 [ 5097.772953] ata2: EH complete [ 5097.789767] ata2.00: exception Emask 0x10 SAct 0x0 SErr 0x180000 action 0x6 frozen [ 5097.789774] ata2.00: irq_stat 0x08000000, interface fatal error [ 5097.789779] ata2: SError: { 10B8B Dispar } [ 5097.789787] ata2.00: cmd c8/00:20:00:00:00/00:00:00:00:00/e0 tag 0 dma 16384 in [ 5097.789789] res 50/00:42:00:00:00/00:00:00:00:00/a0 Emask 0x10 (ATA bus error) [ 5097.789794] ata2.00: status: { DRDY } [ 5097.789801] ata2: hard resetting link [ 5098.272037] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [ 5098.272968] ata2.00: configured for UDMA/33 [ 5098.272988] ata2: EH complete [ 5098.300966] ata2.00: exception Emask 0x10 SAct 0x0 SErr 0x180000 action 0x6 frozen [ 5098.300972] ata2.00: irq_stat 0x08000000, interface fatal error [ 5098.300977] ata2: SError: { 10B8B Dispar } [ 5098.300985] ata2.00: cmd c8/00:20:00:00:00/00:00:00:00:00/e0 tag 0 dma 16384 in [ 5098.300986] res 50/00:42:00:00:00/00:00:00:00:00/a0 Emask 0x10 (ATA bus error) [ 5098.300991] ata2.00: status: { DRDY } [ 5098.300998] ata2: hard resetting link [ 5098.784038] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [ 5098.784944] ata2.00: configured for UDMA/33 [ 5098.784965] ata2: EH complete [ 5098.812163] ata2.00: exception Emask 0x10 SAct 0x0 SErr 0x180000 action 0x6 frozen [ 5098.812169] ata2.00: irq_stat 0x08000000, interface fatal error [ 5098.812174] ata2: SError: { 10B8B Dispar } [ 5098.812182] ata2.00: cmd c8/00:20:00:00:00/00:00:00:00:00/e0 tag 0 dma 16384 in [ 5098.812184] res 50/00:42:00:00:00/00:00:00:00:00/a0 Emask 0x10 (ATA bus error) [ 5098.812189] ata2.00: status: { DRDY } [ 5098.812196] ata2: hard resetting link [ 5099.296045] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [ 5099.296963] ata2.00: configured for UDMA/33 [ 5099.296982] ata2: EH complete [ 5099.323361] ata2.00: exception Emask 0x10 SAct 0x0 SErr 0x380000 action 0x6 frozen [ 5099.323367] ata2.00: irq_stat 0x08000000, interface fatal error [ 5099.323372] ata2: SError: { 10B8B Dispar BadCRC } [ 5099.323381] ata2.00: cmd c8/00:20:00:00:00/00:00:00:00:00/e0 tag 0 dma 16384 in [ 5099.323382] res 50/00:42:00:00:00/00:00:00:00:00/a0 Emask 0x10 (ATA bus error) [ 5099.323387] ata2.00: status: { DRDY } [ 5099.323394] ata2: hard resetting link [ 5099.804049] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [ 5099.804971] ata2.00: configured for UDMA/33 [ 5099.804990] sd 1:0:0:0: [sda] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE,SUGGEST_OK [ 5099.804997] sd 1:0:0:0: [sda] Sense Key : Aborted Command [current] [descriptor] [ 5099.805005] Descriptor sense data with sense descriptors (in hex): [ 5099.805009] 72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00 [ 5099.805030] 00 00 00 00 [ 5099.805034] sd 1:0:0:0: [sda] Add. Sense: No additional sense information [ 5099.805039] end_request: I/O error, dev sda, sector 0 [ 5099.805045] Buffer I/O error on device sda, logical block 0 [ 5099.805051] Buffer I/O error on device sda, logical block 1 [ 5099.805054] Buffer I/O error on device sda, logical block 2 [ 5099.805057] Buffer I/O error on device sda, logical block 3 [ 5099.805075] ata2: EH complete [ 5099.834474] ata2.00: exception Emask 0x10 SAct 0x0 SErr 0x180000 action 0x6 frozen [ 5099.834480] ata2.00: irq_stat 0x08000000, interface fatal error [ 5099.834485] ata2: SError: { 10B8B Dispar } [ 5099.834493] ata2.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in [ 5099.834495] res 50/00:42:00:00:00/00:00:00:00:00/a0 Emask 0x10 (ATA bus error) [ 5099.834499] ata2.00: status: { DRDY } [ 5099.834506] ata2: hard resetting link [ 5100.318078] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [ 5100.318972] ata2.00: configured for UDMA/33 [ 5100.318992] ata2: EH complete [ 5100.345668] ata2.00: exception Emask 0x10 SAct 0x0 SErr 0x180000 action 0x6 frozen [ 5100.345674] ata2.00: irq_stat 0x08000000, interface fatal error [ 5100.345679] ata2: SError: { 10B8B Dispar } [ 5100.345686] ata2.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in [ 5100.345689] res 50/00:42:00:00:00/00:00:00:00:00/a0 Emask 0x10 (ATA bus error) [ 5100.345693] ata2.00: status: { DRDY } [ 5100.345699] ata2: hard resetting link [ 5100.828066] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [ 5100.828962] ata2.00: configured for UDMA/33 [ 5100.828983] ata2: EH complete [ 5100.857020] sd 1:0:0:0: [sda] 234441648 512-byte hardware sectors: (120 GB/111 GiB) [ 5100.858219] ata2.00: exception Emask 0x10 SAct 0x0 SErr 0x380000 action 0x6 frozen [ 5100.858224] ata2.00: irq_stat 0x08000000, interface fatal error [ 5100.858229] ata2: SError: { 10B8B Dispar BadCRC } [ 5100.858237] ata2.00: cmd c8/00:08:80:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in [ 5100.858239] res 50/00:00:07:00:00/00:00:00:00:00/e0 Emask 0x10 (ATA bus error) [ 5100.858243] ata2.00: status: { DRDY } [ 5100.858250] ata2: hard resetting link [ 5101.340033] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [ 5101.340923] ata2.00: configured for UDMA/33 [ 5101.340940] ata2: EH complete [ 5101.369420] ata2.00: exception Emask 0x10 SAct 0x0 SErr 0x180000 action 0x6 frozen [ 5101.369426] ata2.00: irq_stat 0x08000000, interface fatal error [ 5101.369431] ata2: SError: { 10B8B Dispar } [ 5101.369439] ata2.00: cmd c8/00:08:80:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in [ 5101.369441] res 50/00:42:00:00:00/00:00:00:00:00/a0 Emask 0x10 (ATA bus error) [ 5101.369446] ata2.00: status: { DRDY } [ 5101.369453] ata2: hard resetting link [ 5101.852047] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [ 5101.852951] ata2.00: configured for UDMA/33 [ 5101.852972] ata2: EH complete [ 5101.881434] sd 1:0:0:0: [sda] Write Protect is off [ 5101.881438] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 5101.881471] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 5101.881502] sd 1:0:0:0: [sda] 234441648 512-byte hardware sectors: (120 GB/111 GiB) [ 5101.881516] sd 1:0:0:0: [sda] Write Protect is off [ 5101.881518] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 5101.881672] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 8399.225052] ata2.00: exception Emask 0x10 SAct 0x0 SErr 0x180000 action 0x6 frozen [ 8399.225059] ata2.00: irq_stat 0x08000000, interface fatal error [ 8399.225064] ata2: SError: { 10B8B Dispar } [ 8399.225072] ata2.00: cmd c8/00:20:00:00:00/00:00:00:00:00/e0 tag 0 dma 16384 in [ 8399.225074] res 50/00:00:87:00:00/00:00:00:00:00/e0 Emask 0x10 (ATA bus error) [ 8399.225078] ata2.00: status: { DRDY } [ 8399.225085] ata2: hard resetting link [ 8399.708060] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [ 8399.709027] ata2.00: configured for UDMA/33 [ 8399.709042] ata2: EH complete [ 8399.736438] ata2.00: exception Emask 0x10 SAct 0x0 SErr 0x180000 action 0x6 frozen [ 8399.736444] ata2.00: irq_stat 0x08000000, interface fatal error [ 8399.736449] ata2: SError: { 10B8B Dispar } [ 8399.736457] ata2.00: cmd c8/00:20:00:00:00/00:00:00:00:00/e0 tag 0 dma 16384 in [ 8399.736459] res 50/00:42:00:00:00/00:00:00:00:00/a0 Emask 0x10 (ATA bus error) [ 8399.736464] ata2.00: status: { DRDY } [ 8399.736471] ata2: hard resetting link [ 8400.220031] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [ 8400.220925] ata2.00: configured for UDMA/33 [ 8400.220946] ata2: EH complete [ 8400.258577] ata2.00: exception Emask 0x10 SAct 0x0 SErr 0x380000 action 0x6 frozen [ 8400.258584] ata2.00: irq_stat 0x08000000, interface fatal error [ 8400.258589] ata2: SError: { 10B8B Dispar BadCRC } [ 8400.258597] ata2.00: cmd c8/00:20:00:00:00/00:00:00:00:00/e0 tag 0 dma 16384 in [ 8400.258599] res 50/00:42:00:00:00/00:00:00:00:00/a0 Emask 0x10 (ATA bus error) [ 8400.258603] ata2.00: status: { DRDY } [ 8400.258611] ata2: hard resetting link [ 8400.740031] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [ 8400.740926] ata2.00: configured for UDMA/33 [ 8400.740946] ata2: EH complete [ 8400.769772] ata2.00: exception Emask 0x10 SAct 0x0 SErr 0x380000 action 0x6 frozen [ 8400.769778] ata2.00: irq_stat 0x08000000, interface fatal error [ 8400.769783] ata2: SError: { 10B8B Dispar BadCRC } [ 8400.769791] ata2.00: cmd c8/00:20:00:00:00/00:00:00:00:00/e0 tag 0 dma 16384 in [ 8400.769793] res 50/00:42:00:00:00/00:00:00:00:00/a0 Emask 0x10 (ATA bus error) [ 8400.769798] ata2.00: status: { DRDY } [ 8400.769805] ata2: hard resetting link [ 8401.252105] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [ 8401.253092] ata2.00: configured for UDMA/33 [ 8401.253101] ata2: EH complete [ 8401.292080] ata2.00: exception Emask 0x10 SAct 0x0 SErr 0x380000 action 0x6 frozen [ 8401.292086] ata2.00: irq_stat 0x08000000, interface fatal error [ 8401.292091] ata2: SError: { 10B8B Dispar BadCRC } [ 8401.292099] ata2.00: cmd c8/00:20:00:00:00/00:00:00:00:00/e0 tag 0 dma 16384 in [ 8401.292101] res 50/00:42:00:00:00/00:00:00:00:00/a0 Emask 0x10 (ATA bus error) [ 8401.292105] ata2.00: status: { DRDY } [ 8401.292111] ata2: hard resetting link [ 8401.776046] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [ 8401.776939] ata2.00: configured for UDMA/33 [ 8401.776959] ata2: EH complete [ 8401.815632] sd 1:0:0:0: [sda] 234441648 512-byte hardware sectors: (120 GB/111 GiB) [ 8401.815651] sd 1:0:0:0: [sda] Write Protect is off [ 8401.815653] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 8401.815679] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 8401.815707] sd 1:0:0:0: [sda] 234441648 512-byte hardware sectors: (120 GB/111 GiB) [ 8401.815721] sd 1:0:0:0: [sda] Write Protect is off [ 8401.815723] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 8401.815747] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 8543.125486] type=1503 audit(1260926080.017:10): operation="sysctl" requested_mask="r::" denied_mask="r::" fsuid=0 name="/proc/sys/crypto/fips_enabled" pid=22216 profile="/usr/sbin/cupsd" [10167.126647] type=1505 audit(1260927704.018:11): operation="profile_replace" name="/usr/share/gdm/guest-session/Xsession" name2="default" pid=27860 [10167.294297] type=1505 audit(1260927704.185:12): operation="profile_replace" name="/sbin/dhclient-script" name2="default" pid=27861 [10167.294462] type=1505 audit(1260927704.185:13): operation="profile_replace" name="/sbin/dhclient3" name2="default" pid=27861 [10167.294569] type=1505 audit(1260927704.185:14): operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" name2="default" pid=27861 [10167.294659] type=1505 audit(1260927704.185:15): operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" name2="default" pid=27861 [10167.591257] type=1505 audit(1260927704.481:16): operation="profile_replace" name="/usr/lib/cups/backend/cups-pdf" name2="default" pid=27862 [10167.591548] type=1505 audit(1260927704.481:17): operation="profile_replace" name="/usr/sbin/cupsd" name2="default" pid=27862 [10167.690781] type=1505 audit(1260927704.581:18): operation="profile_replace" name="/usr/sbin/tcpdump" name2="default" pid=27863 [10167.811228] type=1505 audit(1260927704.701:19): operation="profile_replace" name="/usr/share/gdm/guest-session/Xsession" name2="default" pid=27893 [10175.497355] __ratelimit: 33 callbacks suppressed [10175.497360] localedef[28143]: segfault at 9 ip 08075cca sp bff24b50 error 4 in localedef[8048000+49000] [10257.937982] type=1505 audit(1260927794.829:31): operation="profile_replace" name="/usr/sbin/tcpdump" name2="default" pid=30153 [10412.557656] type=1505 audit(1260927949.449:32): operation="profile_replace" name="/usr/lib/cups/backend/cups-pdf" name2="default" pid=1265 [10412.558528] type=1505 audit(1260927949.449:33): operation="profile_replace" name="/usr/sbin/cupsd" name2="default" pid=1265 [10512.748384] type=1505 audit(1260928049.641:34): operation="profile_load" name="/usr/bin/evince" name2="default" pid=2412 [10512.750353] type=1505 audit(1260928049.641:35): operation="profile_load" name="/usr/bin/evince-previewer" name2="default" pid=2412 [10512.751618] type=1505 audit(1260928049.641:36): operation="profile_load" name="/usr/bin/evince-thumbnailer" name2="default" pid=2412