[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.31-14-generic (buildd@crested) (gcc version 4.4.1 (Ubuntu 4.4.1-4ubuntu8) ) #48-Ubuntu SMP Fri Oct 16 14:05:01 UTC 2009 (Ubuntu 2.6.31-14.48-generic) [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-2.6.31-14-generic root=/dev/mapper/nvidia_djchjhdb1 loop=/ubuntu/disks/root.disk ro [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Centaur CentaurHauls [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009b400 (usable) [ 0.000000] BIOS-e820: 000000000009b400 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000e3000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 00000000bff90000 (usable) [ 0.000000] BIOS-e820: 00000000bff90000 - 00000000bff9e000 (ACPI data) [ 0.000000] BIOS-e820: 00000000bff9e000 - 00000000bffe0000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000bffe0000 - 00000000bffee000 (reserved) [ 0.000000] BIOS-e820: 00000000bfff0000 - 00000000c0000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fef00000 (reserved) [ 0.000000] BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved) [ 0.000000] BIOS-e820: 0000000100000000 - 0000000120000000 (usable) [ 0.000000] DMI present. [ 0.000000] AMI BIOS detected: BIOS may corrupt low RAM, working around it. [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) [ 0.000000] last_pfn = 0x120000 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-EFFFF uncachable [ 0.000000] F0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 0000000000 mask FF80000000 write-back [ 0.000000] 1 base 0080000000 mask FFC0000000 write-back [ 0.000000] 2 disabled [ 0.000000] 3 disabled [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] TOM2: 0000000120000000 aka 4608M [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] e820 update range: 00000000c0000000 - 0000000100000000 (usable) ==> (reserved) [ 0.000000] last_pfn = 0xbff90 max_arch_pfn = 0x400000000 [ 0.000000] Scanning 0 areas for low memory corruption [ 0.000000] modified physical RAM map: [ 0.000000] modified: 0000000000000000 - 0000000000010000 (reserved) [ 0.000000] modified: 0000000000010000 - 000000000009b400 (usable) [ 0.000000] modified: 000000000009b400 - 00000000000a0000 (reserved) [ 0.000000] modified: 00000000000e3000 - 0000000000100000 (reserved) [ 0.000000] modified: 0000000000100000 - 00000000bff90000 (usable) [ 0.000000] modified: 00000000bff90000 - 00000000bff9e000 (ACPI data) [ 0.000000] modified: 00000000bff9e000 - 00000000bffe0000 (ACPI NVS) [ 0.000000] modified: 00000000bffe0000 - 00000000bffee000 (reserved) [ 0.000000] modified: 00000000bfff0000 - 00000000c0000000 (reserved) [ 0.000000] modified: 00000000fec00000 - 00000000fec01000 (reserved) [ 0.000000] modified: 00000000fee00000 - 00000000fef00000 (reserved) [ 0.000000] modified: 00000000fff00000 - 0000000100000000 (reserved) [ 0.000000] modified: 0000000100000000 - 0000000120000000 (usable) [ 0.000000] initial memory mapped : 0 - 20000000 [ 0.000000] init_memory_mapping: 0000000000000000-00000000bff90000 [ 0.000000] Using x86 segment limits to approximate NX protection [ 0.000000] 0000000000 - 00bfe00000 page 2M [ 0.000000] 00bfe00000 - 00bff90000 page 4k [ 0.000000] kernel direct mapping tables up to bff90000 @ 10000-15000 [ 0.000000] init_memory_mapping: 0000000100000000-0000000120000000 [ 0.000000] Using x86 segment limits to approximate NX protection [ 0.000000] 0100000000 - 0120000000 page 2M [ 0.000000] kernel direct mapping tables up to 120000000 @ 13000-19000 [ 0.000000] RAMDISK: 377f1000 - 37fef20f [ 0.000000] ACPI: RSDP 00000000000fb570 00024 (v02 ACPIAM) [ 0.000000] ACPI: XSDT 00000000bff90100 00064 (v01 091409 XSDT0944 20090914 MSFT 00000097) [ 0.000000] ACPI: FACP 00000000bff90290 000F4 (v03 091409 FACP0944 20090914 MSFT 00000097) [ 0.000000] ACPI: DSDT 00000000bff90450 0AEB3 (v01 A1041 A1041000 00000000 INTL 20060113) [ 0.000000] ACPI: FACS 00000000bff9e000 00040 [ 0.000000] ACPI: APIC 00000000bff90390 00080 (v01 091409 APIC0944 20090914 MSFT 00000097) [ 0.000000] ACPI: MCFG 00000000bff90410 0003C (v01 091409 OEMMCFG 20090914 MSFT 00000097) [ 0.000000] ACPI: OEMB 00000000bff9e040 00072 (v01 091409 OEMB0944 20090914 MSFT 00000097) [ 0.000000] ACPI: HPET 00000000bff9b310 00038 (v01 091409 OEMHPET0 20090914 MSFT 00000097) [ 0.000000] ACPI: INFO 00000000bff9e0c0 00124 (v01 091409 AMDINFO 20090914 MSFT 00000097) [ 0.000000] ACPI: NVHD 00000000bff9e1f0 00284 (v01 091409 NVHDCP 20090914 MSFT 00000097) [ 0.000000] ACPI: SSDT 00000000bff9b350 0028A (v01 A M I POWERNOW 00000001 AMD 00000001) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] Scanning NUMA topology in Northbridge 24 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at 0000000000000000-0000000120000000 [ 0.000000] Bootmem setup node 0 0000000000000000-0000000120000000 [ 0.000000] NODE_DATA [0000000000014000 - 0000000000018fff] [ 0.000000] bootmap [0000000000019000 - 000000000003cfff] pages 24 [ 0.000000] (8 early reservations) ==> bootmem [0000000000 - 0120000000] [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] [ 0.000000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000] [ 0.000000] #2 [0001000000 - 00019e2ccc] TEXT DATA BSS ==> [0001000000 - 00019e2ccc] [ 0.000000] #3 [00377f1000 - 0037fef20f] RAMDISK ==> [00377f1000 - 0037fef20f] [ 0.000000] #4 [000009b400 - 0000100000] BIOS reserved ==> [000009b400 - 0000100000] [ 0.000000] #5 [00019e3000 - 00019e3290] BRK ==> [00019e3000 - 00019e3290] [ 0.000000] #6 [0000010000 - 0000013000] PGTABLE ==> [0000010000 - 0000013000] [ 0.000000] #7 [0000013000 - 0000014000] PGTABLE ==> [0000013000 - 0000014000] [ 0.000000] found SMP MP-table at [ffff8800000ff780] ff780 [ 0.000000] [ffffea0000000000-ffffea0003ffffff] PMD -> [ffff880028600000-ffff88002b7fffff] on node 0 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000010 -> 0x00001000 [ 0.000000] DMA32 0x00001000 -> 0x00100000 [ 0.000000] Normal 0x00100000 -> 0x00120000 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[3] active PFN ranges [ 0.000000] 0: 0x00000010 -> 0x0000009b [ 0.000000] 0: 0x00000100 -> 0x000bff90 [ 0.000000] 0: 0x00100000 -> 0x00120000 [ 0.000000] On node 0 totalpages: 917275 [ 0.000000] DMA zone: 56 pages used for memmap [ 0.000000] DMA zone: 107 pages reserved [ 0.000000] DMA zone: 3816 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 14280 pages used for memmap [ 0.000000] DMA32 zone: 767944 pages, LIFO batch:31 [ 0.000000] Normal zone: 1792 pages used for memmap [ 0.000000] Normal zone: 129280 pages, LIFO batch:31 [ 0.000000] Detected use of extended apic ids on hypertransport bus [ 0.000000] ACPI: PM-Timer IO Port: 0x508 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] ACPI: IRQ14 used by override. [ 0.000000] ACPI: IRQ15 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x10de8201 base: 0xfed00000 [ 0.000000] SMP: Allowing 4 CPUs, 2 hotplug CPUs [ 0.000000] nr_irqs_gsi: 24 [ 0.000000] PM: Registered nosave memory: 000000000009b000 - 000000000009c000 [ 0.000000] PM: Registered nosave memory: 000000000009c000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e3000 [ 0.000000] PM: Registered nosave memory: 00000000000e3000 - 0000000000100000 [ 0.000000] PM: Registered nosave memory: 00000000bff90000 - 00000000bff9e000 [ 0.000000] PM: Registered nosave memory: 00000000bff9e000 - 00000000bffe0000 [ 0.000000] PM: Registered nosave memory: 00000000bffe0000 - 00000000bffee000 [ 0.000000] PM: Registered nosave memory: 00000000bffee000 - 00000000bfff0000 [ 0.000000] PM: Registered nosave memory: 00000000bfff0000 - 00000000c0000000 [ 0.000000] PM: Registered nosave memory: 00000000c0000000 - 00000000fec00000 [ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fec01000 [ 0.000000] PM: Registered nosave memory: 00000000fec01000 - 00000000fee00000 [ 0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fef00000 [ 0.000000] PM: Registered nosave memory: 00000000fef00000 - 00000000fff00000 [ 0.000000] PM: Registered nosave memory: 00000000fff00000 - 0000000100000000 [ 0.000000] Allocating PCI resources starting at c0000000 (gap: c0000000:3ec00000) [ 0.000000] NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:4 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 30 pages at ffff88002801f000, static data 90720 bytes [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 901040 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.31-14-generic root=/dev/mapper/nvidia_djchjhdb1 loop=/ubuntu/disks/root.disk ro [ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes) [ 0.000000] Initializing CPU#0 [ 0.000000] Checking aperture... [ 0.000000] No AGP bridge found [ 0.000000] Node 0: aperture @ 200000000 size 32 MB [ 0.000000] Aperture beyond 4GB. Ignoring. [ 0.000000] Your BIOS doesn't leave a aperture memory hole [ 0.000000] Please enable the IOMMU option in the BIOS setup [ 0.000000] This costs you 64 MB of RAM [ 0.000000] Mapping aperture over 65536 KB of RAM @ 20000000 [ 0.000000] PM: Registered nosave memory: 0000000020000000 - 0000000024000000 [ 0.000000] Memory: 3533340k/4718592k available (5313k kernel code, 1049492k absent, 135760k reserved, 3011k data, 660k init) [ 0.000000] SLUB: Genslabs=14, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] NR_IRQS:4352 nr_irqs:440 [ 0.000000] Extended CMOS year: 2000 [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 2600.030 MHz processor. [ 0.000012] spurious 8259A interrupt: IRQ7. [ 0.001662] Console: colour VGA+ 80x25 [ 0.001664] console [tty0] enabled [ 0.010000] allocated 36700160 bytes of page_cgroup [ 0.010000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.010000] hpet clockevent registered [ 0.010000] HPET: 3 timers in total, 0 timers will be used for per-cpu timer [ 0.010000] Calibrating delay loop (skipped), value calculated using timer frequency.. 5200.06 BogoMIPS (lpj=26000300) [ 0.010000] Security Framework initialized [ 0.010000] AppArmor: AppArmor initialized [ 0.010000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.010000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.010000] Mount-cache hash table entries: 256 [ 0.010000] Initializing cgroup subsys ns [ 0.010000] Initializing cgroup subsys cpuacct [ 0.010000] Initializing cgroup subsys memory [ 0.010000] Initializing cgroup subsys freezer [ 0.010000] Initializing cgroup subsys net_cls [ 0.010000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 0.010000] CPU: L2 Cache: 512K (64 bytes/line) [ 0.010000] CPU 0/0x0 -> Node 0 [ 0.010000] tseg: 0000000000 [ 0.010000] CPU: Physical Processor ID: 0 [ 0.010000] CPU: Processor Core ID: 0 [ 0.010000] mce: CPU supports 5 MCE banks [ 0.010000] using C1E aware idle routine [ 0.010000] Performance Counters: AMD PMU driver. [ 0.010000] ... version: 0 [ 0.010000] ... bit width: 48 [ 0.010000] ... generic counters: 4 [ 0.010000] ... value mask: 0000ffffffffffff [ 0.010000] ... max period: 00007fffffffffff [ 0.010000] ... fixed-purpose counters: 0 [ 0.010000] ... counter mask: 000000000000000f [ 0.010000] ACPI: Core revision 20090521 [ 0.020058] Setting APIC routing to flat [ 0.020585] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.120774] CPU0: AMD Athlon(tm) 64 X2 Dual Core Processor 5000+ stepping 02 [ 0.130000] Booting processor 1 APIC 0x1 ip 0x6000 [ 0.010000] Initializing CPU#1 [ 0.010000] Calibrating delay using timer specific routine.. 5200.06 BogoMIPS (lpj=26000326) [ 0.010000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 0.010000] CPU: L2 Cache: 512K (64 bytes/line) [ 0.010000] CPU 1/0x1 -> Node 0 [ 0.010000] CPU: Physical Processor ID: 0 [ 0.010000] CPU: Processor Core ID: 1 [ 0.010000] mce: CPU supports 5 MCE banks [ 0.010000] x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106 [ 0.280418] CPU1: AMD Athlon(tm) 64 X2 Dual Core Processor 5000+ stepping 02 [ 0.281124] Brought up 2 CPUs [ 0.281183] Total of 2 processors activated (10400.12 BogoMIPS). [ 0.281331] CPU0 attaching sched-domain: [ 0.281334] domain 0: span 0-1 level MC [ 0.281336] groups: 0 1 [ 0.281340] CPU1 attaching sched-domain: [ 0.281342] domain 0: span 0-1 level MC [ 0.281344] groups: 1 0 [ 0.281401] Booting paravirtualized kernel on bare hardware [ 0.281401] regulator: core version 0.5 [ 0.281401] Time: 17:24:25 Date: 12/10/09 [ 0.281401] NET: Registered protocol family 16 [ 0.281401] node 0 link 0: io port [5000, ffffff] [ 0.281401] node 0 link 0: io port [1000, 1fff] [ 0.281401] TOM: 00000000e0000000 aka 3584M [ 0.281401] node 0 link 0: mmio [e0000000, efffffff] [ 0.281401] node 0 link 0: mmio [a0000, bffff] [ 0.281401] node 0 link 0: mmio [e0000000, fe0bffff] [ 0.281401] TOM2: 0000000120000000 aka 4608M [ 0.281401] bus: [00,07] on node 0 link 0 [ 0.281401] bus: 00 index 0 io port: [2000, ffff] [ 0.281401] bus: 00 index 1 io port: [0, 1fff] [ 0.281401] bus: 00 index 2 mmio: [e0000000, ffffffff] [ 0.281401] bus: 00 index 3 mmio: [a0000, bffff] [ 0.281401] bus: 00 index 4 mmio: [120000000, fcffffffff] [ 0.281401] ACPI: bus type pci registered [ 0.281401] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255 [ 0.281401] PCI: Not using MMCONFIG. [ 0.281401] PCI: Using configuration type 1 for base access [ 0.281401] mtrr: your CPUs had inconsistent fixed MTRR settings [ 0.281401] mtrr: probably your BIOS does not setup all CPUs. [ 0.281401] mtrr: corrected configuration. [ 0.281646] bio: create slab at 0 [ 0.281646] ACPI: EC: Look up EC in DSDT [ 0.299246] ACPI: Interpreter enabled [ 0.299309] ACPI: (supports S0 S1 S3 S4 S5) [ 0.299581] ACPI: Using IOAPIC for interrupt routing [ 0.299698] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255 [ 0.307141] PCI: MCFG area at e0000000 reserved in ACPI motherboard resources [ 0.315914] PCI: Using MMCONFIG at e0000000 - efffffff [ 0.329828] ACPI Warning: Incorrect checksum in table [OEMB] - 6E, should be 66 20090521 tbutils-246 [ 0.330209] ACPI: No dock devices found. [ 0.330656] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 0.330978] pci 0000:00:01.0: reg 10 io port: [0x900-0x9ff] [ 0.331016] pci 0000:00:01.1: reg 10 io port: [0xe00-0xe3f] [ 0.331026] pci 0000:00:01.1: reg 20 io port: [0x600-0x63f] [ 0.331030] pci 0000:00:01.1: reg 24 io port: [0x700-0x73f] [ 0.331049] pci 0000:00:01.1: PME# supported from D3hot D3cold [ 0.331116] pci 0000:00:01.1: PME# disabled [ 0.331229] pci 0000:00:01.3: reg 10 32bit mmio: [0xfcf80000-0xfcffffff] [ 0.331352] pci 0000:00:02.0: reg 10 32bit mmio: [0xfcf7e000-0xfcf7efff] [ 0.331374] pci 0000:00:02.0: supports D1 D2 [ 0.331376] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.331441] pci 0000:00:02.0: PME# disabled [ 0.331523] pci 0000:00:02.1: reg 10 32bit mmio: [0xfcf7fc00-0xfcf7fcff] [ 0.331549] pci 0000:00:02.1: supports D1 D2 [ 0.331551] pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold [ 0.331616] pci 0000:00:02.1: PME# disabled [ 0.331700] pci 0000:00:04.0: reg 10 32bit mmio: [0xfcf7d000-0xfcf7dfff] [ 0.331722] pci 0000:00:04.0: supports D1 D2 [ 0.331723] pci 0000:00:04.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.331788] pci 0000:00:04.0: PME# disabled [ 0.331868] pci 0000:00:04.1: reg 10 32bit mmio: [0xfcf7f800-0xfcf7f8ff] [ 0.331895] pci 0000:00:04.1: supports D1 D2 [ 0.331896] pci 0000:00:04.1: PME# supported from D0 D1 D2 D3hot D3cold [ 0.331961] pci 0000:00:04.1: PME# disabled [ 0.332052] pci 0000:00:06.0: reg 20 io port: [0xffa0-0xffaf] [ 0.332089] pci 0000:00:07.0: reg 10 32bit mmio: [0xfcf78000-0xfcf7bfff] [ 0.332115] pci 0000:00:07.0: PME# supported from D3hot D3cold [ 0.332178] pci 0000:00:07.0: PME# disabled [ 0.332288] pci 0000:00:09.0: reg 10 io port: [0xd480-0xd487] [ 0.332291] pci 0000:00:09.0: reg 14 io port: [0xd400-0xd403] [ 0.332295] pci 0000:00:09.0: reg 18 io port: [0xd080-0xd087] [ 0.332298] pci 0000:00:09.0: reg 1c io port: [0xd000-0xd003] [ 0.332301] pci 0000:00:09.0: reg 20 io port: [0xcc00-0xcc0f] [ 0.332305] pci 0000:00:09.0: reg 24 32bit mmio: [0xfcf76000-0xfcf77fff] [ 0.332341] pci 0000:00:0a.0: reg 10 32bit mmio: [0xfcf7c000-0xfcf7cfff] [ 0.332344] pci 0000:00:0a.0: reg 14 io port: [0xc880-0xc887] [ 0.332348] pci 0000:00:0a.0: reg 18 32bit mmio: [0xfcf7f400-0xfcf7f4ff] [ 0.332351] pci 0000:00:0a.0: reg 1c 32bit mmio: [0xfcf7f000-0xfcf7f00f] [ 0.332370] pci 0000:00:0a.0: supports D1 D2 [ 0.332372] pci 0000:00:0a.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.332438] pci 0000:00:0a.0: PME# disabled [ 0.332525] pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.332590] pci 0000:00:0b.0: PME# disabled [ 0.332853] pci 0000:00:10.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.332922] pci 0000:00:10.0: PME# disabled [ 0.333217] pci 0000:00:12.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.333286] pci 0000:00:12.0: PME# disabled [ 0.333474] pci 0000:00:08.0: transparent bridge [ 0.333552] pci 0000:02:00.0: reg 10 32bit mmio: [0xfd000000-0xfdffffff] [ 0.333557] pci 0000:02:00.0: reg 14 64bit mmio: [0xf0000000-0xf7ffffff] [ 0.333562] pci 0000:02:00.0: reg 1c 64bit mmio: [0xfa000000-0xfbffffff] [ 0.333566] pci 0000:02:00.0: reg 24 io port: [0xec00-0xec7f] [ 0.333569] pci 0000:02:00.0: reg 30 32bit mmio: [0xfebe0000-0xfebfffff] [ 0.333595] pci 0000:00:0b.0: bridge io port: [0xe000-0xefff] [ 0.333598] pci 0000:00:0b.0: bridge 32bit mmio: [0xfd000000-0xfebfffff] [ 0.333601] pci 0000:00:0b.0: bridge 64bit mmio pref: [0xf0000000-0xfbffffff] [ 0.333773] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.334064] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT] [ 0.334146] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.IXVE._PRT] [ 0.334210] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.MXR0._PRT] [ 0.334274] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR12._PRT] [ 0.349374] ACPI: PCI Interrupt Link [LNKA] (IRQs 16 17 18 19) *0, disabled. [ 0.350020] ACPI: PCI Interrupt Link [LNKB] (IRQs 16 17 18 19) *0, disabled. [ 0.350634] ACPI: PCI Interrupt Link [LNKC] (IRQs 16 17 18 19) *0, disabled. [ 0.351246] ACPI: PCI Interrupt Link [LNKD] (IRQs 16 17 18 19) *0, disabled. [ 0.351862] ACPI: PCI Interrupt Link [LN0A] (IRQs 16 17 18 19) *10 [ 0.352432] ACPI: PCI Interrupt Link [LN0B] (IRQs 16 17 18 19) *0, disabled. [ 0.353043] ACPI: PCI Interrupt Link [LN0C] (IRQs 16 17 18 19) *0, disabled. [ 0.353655] ACPI: PCI Interrupt Link [LN0D] (IRQs 16 17 18 19) *0, disabled. [ 0.354267] ACPI: PCI Interrupt Link [LN1A] (IRQs 16 17 18 19) *0, disabled. [ 0.354880] ACPI: PCI Interrupt Link [LN1B] (IRQs 16 17 18 19) *0, disabled. [ 0.355492] ACPI: PCI Interrupt Link [LN1C] (IRQs 16 17 18 19) *0, disabled. [ 0.356104] ACPI: PCI Interrupt Link [LN1D] (IRQs 16 17 18 19) *0, disabled. [ 0.356720] ACPI: PCI Interrupt Link [LN2A] (IRQs 16 17 18 19) *11 [ 0.357292] ACPI: PCI Interrupt Link [LN2B] (IRQs 16 17 18 19) *0, disabled. [ 0.357904] ACPI: PCI Interrupt Link [LN2C] (IRQs 16 17 18 19) *0, disabled. [ 0.358516] ACPI: PCI Interrupt Link [LN2D] (IRQs 16 17 18 19) *0, disabled. [ 0.359129] ACPI: PCI Interrupt Link [LN3A] (IRQs 16 17 18 19) *0, disabled. [ 0.359748] ACPI: PCI Interrupt Link [LN3B] (IRQs 16 17 18 19) *0, disabled. [ 0.360368] ACPI: PCI Interrupt Link [LN3C] (IRQs 16 17 18 19) *0, disabled. [ 0.360980] ACPI: PCI Interrupt Link [LN3D] (IRQs 16 17 18 19) *0, disabled. [ 0.361592] ACPI: PCI Interrupt Link [LN4A] (IRQs 16 17 18 19) *0, disabled. [ 0.362204] ACPI: PCI Interrupt Link [LN4B] (IRQs 16 17 18 19) *0, disabled. [ 0.362816] ACPI: PCI Interrupt Link [LN4C] (IRQs 16 17 18 19) *0, disabled. [ 0.363429] ACPI: PCI Interrupt Link [LN4D] (IRQs 16 17 18 19) *0, disabled. [ 0.364041] ACPI: PCI Interrupt Link [LN5A] (IRQs 16 17 18 19) *0, disabled. [ 0.364653] ACPI: PCI Interrupt Link [LN5B] (IRQs 16 17 18 19) *0, disabled. [ 0.365270] ACPI: PCI Interrupt Link [LN5C] (IRQs 16 17 18 19) *0, disabled. [ 0.365883] ACPI: PCI Interrupt Link [LN5D] (IRQs 16 17 18 19) *0, disabled. [ 0.366497] ACPI: PCI Interrupt Link [LN6A] (IRQs 16 17 18 19) *0, disabled. [ 0.367111] ACPI: PCI Interrupt Link [LN6B] (IRQs 16 17 18 19) *0, disabled. [ 0.367724] ACPI: PCI Interrupt Link [LN6C] (IRQs 16 17 18 19) *0, disabled. [ 0.368338] ACPI: PCI Interrupt Link [LN6D] (IRQs 16 17 18 19) *0, disabled. [ 0.368952] ACPI: PCI Interrupt Link [LN7A] (IRQs 16 17 18 19) *0, disabled. [ 0.369567] ACPI: PCI Interrupt Link [LN7B] (IRQs 16 17 18 19) *0, disabled. [ 0.370224] ACPI: PCI Interrupt Link [LN7C] (IRQs 16 17 18 19) *0, disabled. [ 0.370839] ACPI: PCI Interrupt Link [LN7D] (IRQs 16 17 18 19) *0, disabled. [ 0.371456] ACPI: PCI Interrupt Link [LUB0] (IRQs 20 21 22 23) *15 [ 0.372033] ACPI: PCI Interrupt Link [LUB2] (IRQs 20 21 22 23) *11 [ 0.372610] ACPI: PCI Interrupt Link [LMAC] (IRQs 20 21 22 23) *15 [ 0.373187] ACPI: PCI Interrupt Link [LAZA] (IRQs 20 21 22 23) *11 [ 0.373765] ACPI: PCI Interrupt Link [SGRU] (IRQs 20 21 22 23) *15 [ 0.374343] ACPI: PCI Interrupt Link [LSMB] (IRQs 20 21 22 23) *10 [ 0.374933] ACPI: PCI Interrupt Link [LPMU] (IRQs 20 21 22 23) *7 [ 0.375521] ACPI: PCI Interrupt Link [LSA0] (IRQs 20 21 22 23) *5 [ 0.376147] ACPI: PCI Interrupt Link [LATA] (IRQs 20 21 22 23) *0, disabled. [ 0.376777] ACPI: PCI Interrupt Link [UB11] (IRQs 20 21 22 23) *10 [ 0.377365] ACPI: PCI Interrupt Link [UB12] (IRQs 20 21 22 23) *10 [ 0.377863] SCSI subsystem initialized [ 0.377965] libata version 3.00 loaded. [ 0.377965] usbcore: registered new interface driver usbfs [ 0.377965] usbcore: registered new interface driver hub [ 0.377965] usbcore: registered new device driver usb [ 0.377965] ACPI: WMI: Mapper loaded [ 0.377965] PCI: Using ACPI for IRQ routing [ 0.400005] Bluetooth: Core ver 2.15 [ 0.400078] NET: Registered protocol family 31 [ 0.400078] Bluetooth: HCI device and connection manager initialized [ 0.400135] Bluetooth: HCI socket layer initialized [ 0.400196] NetLabel: Initializing [ 0.400254] NetLabel: domain hash size = 128 [ 0.400314] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.400386] NetLabel: unlabeled traffic allowed by default [ 0.400646] PCI-DMA: Disabling AGP. [ 0.400781] PCI-DMA: aperture base @ 20000000 size 65536 KB [ 0.400843] PCI-DMA: using GART IOMMU. [ 0.400904] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture [ 0.401419] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 31 [ 0.401645] hpet0: 3 comparators, 32-bit 25.000000 MHz counter [ 0.420017] Switched to high resolution mode on CPU 0 [ 0.420356] Switched to high resolution mode on CPU 1 [ 0.440018] pnp: PnP ACPI init [ 0.440094] ACPI: bus type pnp registered [ 0.442379] pnp 00:05: io resource (0x900-0x97f) overlaps 0000:00:01.0 BAR 0 (0x900-0x9ff), disabling [ 0.442462] pnp 00:05: io resource (0x980-0x9ff) overlaps 0000:00:01.0 BAR 0 (0x900-0x9ff), disabling [ 0.447426] pnp: PnP ACPI: found 12 devices [ 0.447486] ACPI: ACPI bus type pnp unregistered [ 0.447556] system 00:05: ioport range 0x4d0-0x4d1 has been reserved [ 0.447620] system 00:05: ioport range 0x800-0x80f has been reserved [ 0.447685] system 00:05: ioport range 0x500-0x57f has been reserved [ 0.447749] system 00:05: ioport range 0x580-0x5ff has been reserved [ 0.447813] system 00:05: ioport range 0x800-0x87f could not be reserved [ 0.447878] system 00:05: ioport range 0x880-0x8ff has been reserved [ 0.447942] system 00:05: ioport range 0xd00-0xd7f has been reserved [ 0.448007] system 00:05: ioport range 0xd80-0xdff has been reserved [ 0.448072] system 00:05: iomem range 0xfed04000-0xfed04fff has been reserved [ 0.448138] system 00:05: iomem range 0xfee01000-0xfeefffff has been reserved [ 0.448206] system 00:08: iomem range 0xfec00000-0xfec00fff could not be reserved [ 0.448285] system 00:08: iomem range 0xfee00000-0xfee00fff has been reserved [ 0.448352] system 00:09: ioport range 0x230-0x23f has been reserved [ 0.448416] system 00:09: ioport range 0x290-0x29f has been reserved [ 0.448480] system 00:09: ioport range 0xa00-0xa0f has been reserved [ 0.448544] system 00:09: ioport range 0xa10-0xa1f has been reserved [ 0.448610] system 00:0a: iomem range 0xe0000000-0xefffffff has been reserved [ 0.448677] system 00:0b: iomem range 0x0-0x9ffff could not be reserved [ 0.448742] system 00:0b: iomem range 0xc0000-0xcffff has been reserved [ 0.448806] system 00:0b: iomem range 0xe0000-0xfffff could not be reserved [ 0.448871] system 00:0b: iomem range 0x100000-0xdfffffff could not be reserved [ 0.448950] system 00:0b: iomem range 0xfed45000-0xffffffff could not be reserved [ 0.453700] AppArmor: AppArmor Filesystem Enabled [ 0.453819] pci 0000:00:08.0: PCI bridge, secondary bus 0000:01 [ 0.453882] pci 0000:00:08.0: IO window: disabled [ 0.453944] pci 0000:00:08.0: MEM window: disabled [ 0.454006] pci 0000:00:08.0: PREFETCH window: disabled [ 0.454070] pci 0000:00:0b.0: PCI bridge, secondary bus 0000:02 [ 0.454134] pci 0000:00:0b.0: IO window: 0xe000-0xefff [ 0.454197] pci 0000:00:0b.0: MEM window: 0xfd000000-0xfebfffff [ 0.455716] pci 0000:00:0b.0: PREFETCH window: 0x000000f0000000-0x000000fbffffff [ 0.455796] pci 0000:00:10.0: PCI bridge, secondary bus 0000:03 [ 0.455859] pci 0000:00:10.0: IO window: disabled [ 0.455927] pci 0000:00:10.0: MEM window: disabled [ 0.455994] pci 0000:00:10.0: PREFETCH window: disabled [ 0.456062] pci 0000:00:12.0: PCI bridge, secondary bus 0000:04 [ 0.456124] pci 0000:00:12.0: IO window: disabled [ 0.456193] pci 0000:00:12.0: MEM window: disabled [ 0.456259] pci 0000:00:12.0: PREFETCH window: disabled [ 0.456332] pci 0000:00:08.0: setting latency timer to 64 [ 0.456336] pci 0000:00:0b.0: setting latency timer to 64 [ 0.456689] ACPI: PCI Interrupt Link [LN0A] enabled at IRQ 19 [ 0.456753] alloc irq_desc for 19 on node 0 [ 0.456755] alloc kstat_irqs on node 0 [ 0.456763] pci 0000:00:10.0: PCI INT A -> Link[LN0A] -> GSI 19 (level, low) -> IRQ 19 [ 0.456847] pci 0000:00:10.0: setting latency timer to 64 [ 0.457191] ACPI: PCI Interrupt Link [LN2A] enabled at IRQ 18 [ 0.457254] alloc irq_desc for 18 on node 0 [ 0.457256] alloc kstat_irqs on node 0 [ 0.457262] pci 0000:00:12.0: PCI INT A -> Link[LN2A] -> GSI 18 (level, low) -> IRQ 18 [ 0.457347] pci 0000:00:12.0: setting latency timer to 64 [ 0.457353] pci_bus 0000:00: resource 0 io: [0x00-0xffff] [ 0.457355] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff] [ 0.457358] pci_bus 0000:01: resource 3 io: [0x00-0xffff] [ 0.457360] pci_bus 0000:01: resource 4 mem: [0x000000-0xffffffffffffffff] [ 0.457362] pci_bus 0000:02: resource 0 io: [0xe000-0xefff] [ 0.457364] pci_bus 0000:02: resource 1 mem: [0xfd000000-0xfebfffff] [ 0.457366] pci_bus 0000:02: resource 2 pref mem [0xf0000000-0xfbffffff] [ 0.457402] NET: Registered protocol family 2 [ 0.457606] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.458958] TCP established hash table entries: 524288 (order: 11, 8388608 bytes) [ 0.462845] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.463388] TCP: Hash tables configured (established 524288 bind 65536) [ 0.463453] TCP reno registered [ 0.463607] NET: Registered protocol family 1 [ 0.463725] Trying to unpack rootfs image as initramfs... [ 0.627764] Freeing initrd memory: 8184k freed [ 0.631829] Scanning for low memory corruption every 60 seconds [ 0.632004] audit: initializing netlink socket (disabled) [ 0.632080] type=2000 audit(1260465865.630:1): initialized [ 0.639522] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.640776] VFS: Disk quotas dquot_6.5.2 [ 0.640883] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.641462] fuse init (API version 7.12) [ 0.641592] msgmni has been set to 6917 [ 0.641869] alg: No test for stdrng (krng) [ 0.641948] io scheduler noop registered [ 0.642008] io scheduler anticipatory registered [ 0.642068] io scheduler deadline registered [ 0.642163] io scheduler cfq registered (default) [ 0.710152] pci 0000:00:07.0: Enabling HT MSI Mapping [ 0.710311] pci 0000:00:08.0: Enabling HT MSI Mapping [ 0.710474] pci 0000:00:09.0: Enabling HT MSI Mapping [ 0.710644] pci 0000:00:0a.0: Enabling HT MSI Mapping [ 0.710813] pci 0000:00:0b.0: Enabling HT MSI Mapping [ 0.710993] pci 0000:02:00.0: Boot video device [ 0.711520] alloc irq_desc for 24 on node 0 [ 0.711522] alloc kstat_irqs on node 0 [ 0.711541] pcieport-driver 0000:00:10.0: irq 24 for MSI/MSI-X [ 0.711561] pcieport-driver 0000:00:10.0: setting latency timer to 64 [ 0.711963] alloc irq_desc for 25 on node 0 [ 0.711964] alloc kstat_irqs on node 0 [ 0.711981] pcieport-driver 0000:00:12.0: irq 25 for MSI/MSI-X [ 0.711999] pcieport-driver 0000:00:12.0: setting latency timer to 64 [ 0.712157] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.712240] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 0.712412] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0 [ 0.712491] ACPI: Power Button [PWRF] [ 0.712599] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1 [ 0.712678] ACPI: Power Button [PWRB] [ 0.713306] processor LNXCPU:00: registered as cooling_device0 [ 0.713615] processor LNXCPU:01: registered as cooling_device1 [ 0.721410] Linux agpgart interface v0.103 [ 0.721479] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.722527] brd: module loaded [ 0.722960] loop: module loaded [ 0.723082] input: Macintosh mouse button emulation as /devices/virtual/input/input2 [ 0.723292] ahci 0000:00:09.0: version 3.0 [ 0.723725] ACPI: PCI Interrupt Link [LSA0] enabled at IRQ 23 [ 0.723791] alloc irq_desc for 23 on node 0 [ 0.723792] alloc kstat_irqs on node 0 [ 0.723801] ahci 0000:00:09.0: PCI INT A -> Link[LSA0] -> GSI 23 (level, low) -> IRQ 23 [ 0.723919] alloc irq_desc for 26 on node 0 [ 0.723920] alloc kstat_irqs on node 0 [ 0.723926] ahci 0000:00:09.0: irq 26 for MSI/MSI-X [ 0.723996] ahci 0000:00:09.0: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x3f impl RAID mode [ 0.724077] ahci 0000:00:09.0: flags: 64bit ncq sntf led clo pmp pio [ 0.724142] ahci 0000:00:09.0: setting latency timer to 64 [ 0.724626] scsi0 : ahci [ 0.724799] scsi1 : ahci [ 0.724914] scsi2 : ahci [ 0.725028] scsi3 : ahci [ 0.725145] scsi4 : ahci [ 0.725265] scsi5 : ahci [ 0.725440] ata1: SATA max UDMA/133 abar m8192@0xfcf76000 port 0xfcf76100 irq 26 [ 0.725519] ata2: SATA max UDMA/133 abar m8192@0xfcf76000 port 0xfcf76180 irq 26 [ 0.725597] ata3: SATA max UDMA/133 abar m8192@0xfcf76000 port 0xfcf76200 irq 26 [ 0.725676] ata4: SATA max UDMA/133 abar m8192@0xfcf76000 port 0xfcf76280 irq 26 [ 0.725754] ata5: SATA max UDMA/133 abar m8192@0xfcf76000 port 0xfcf76300 irq 26 [ 0.725833] ata6: SATA max UDMA/133 abar m8192@0xfcf76000 port 0xfcf76380 irq 26 [ 0.726153] pata_amd 0000:00:06.0: version 0.4.1 [ 0.726188] pata_amd 0000:00:06.0: setting latency timer to 64 [ 0.726267] scsi6 : pata_amd [ 0.726382] scsi7 : pata_amd [ 0.727644] ata7: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14 [ 0.727710] ata8: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15 [ 0.728344] Fixed MDIO Bus: probed [ 0.728434] PPP generic driver version 2.4.2 [ 0.728591] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.729093] ACPI: PCI Interrupt Link [LUB2] enabled at IRQ 22 [ 0.729159] alloc irq_desc for 22 on node 0 [ 0.729160] alloc kstat_irqs on node 0 [ 0.729169] ehci_hcd 0000:00:02.1: PCI INT B -> Link[LUB2] -> GSI 22 (level, low) -> IRQ 22 [ 0.729265] ehci_hcd 0000:00:02.1: setting latency timer to 64 [ 0.729268] ehci_hcd 0000:00:02.1: EHCI Host Controller [ 0.729372] ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 1 [ 0.729475] ehci_hcd 0000:00:02.1: debug port 1 [ 0.729538] ehci_hcd 0000:00:02.1: cache line size of 64 is not supported [ 0.729557] ehci_hcd 0000:00:02.1: irq 22, io mem 0xfcf7fc00 [ 0.740012] ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00 [ 0.740134] usb usb1: configuration #1 chosen from 1 choice [ 0.740218] hub 1-0:1.0: USB hub found [ 0.740282] hub 1-0:1.0: 6 ports detected [ 0.740814] ACPI: PCI Interrupt Link [UB12] enabled at IRQ 21 [ 0.740878] alloc irq_desc for 21 on node 0 [ 0.740879] alloc kstat_irqs on node 0 [ 0.740887] ehci_hcd 0000:00:04.1: PCI INT B -> Link[UB12] -> GSI 21 (level, low) -> IRQ 21 [ 0.740975] ehci_hcd 0000:00:04.1: setting latency timer to 64 [ 0.740978] ehci_hcd 0000:00:04.1: EHCI Host Controller [ 0.741069] ehci_hcd 0000:00:04.1: new USB bus registered, assigned bus number 2 [ 0.741169] ehci_hcd 0000:00:04.1: debug port 1 [ 0.741231] ehci_hcd 0000:00:04.1: cache line size of 64 is not supported [ 0.741248] ehci_hcd 0000:00:04.1: irq 21, io mem 0xfcf7f800 [ 0.760011] ehci_hcd 0000:00:04.1: USB 2.0 started, EHCI 1.00 [ 0.760118] usb usb2: configuration #1 chosen from 1 choice [ 0.760199] hub 2-0:1.0: USB hub found [ 0.760263] hub 2-0:1.0: 6 ports detected [ 0.760379] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.760873] ACPI: PCI Interrupt Link [LUB0] enabled at IRQ 20 [ 0.760937] alloc irq_desc for 20 on node 0 [ 0.760938] alloc kstat_irqs on node 0 [ 0.760946] ohci_hcd 0000:00:02.0: PCI INT A -> Link[LUB0] -> GSI 20 (level, low) -> IRQ 20 [ 0.761034] ohci_hcd 0000:00:02.0: setting latency timer to 64 [ 0.761036] ohci_hcd 0000:00:02.0: OHCI Host Controller [ 0.761126] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 3 [ 0.761228] ohci_hcd 0000:00:02.0: irq 20, io mem 0xfcf7e000 [ 0.822058] usb usb3: configuration #1 chosen from 1 choice [ 0.822140] hub 3-0:1.0: USB hub found [ 0.822206] hub 3-0:1.0: 6 ports detected [ 0.822716] ACPI: PCI Interrupt Link [UB11] enabled at IRQ 23 [ 0.822780] ohci_hcd 0000:00:04.0: PCI INT A -> Link[UB11] -> GSI 23 (level, low) -> IRQ 23 [ 0.822868] ohci_hcd 0000:00:04.0: setting latency timer to 64 [ 0.822870] ohci_hcd 0000:00:04.0: OHCI Host Controller [ 0.822958] ohci_hcd 0000:00:04.0: new USB bus registered, assigned bus number 4 [ 0.823058] ohci_hcd 0000:00:04.0: irq 23, io mem 0xfcf7d000 [ 0.882225] usb usb4: configuration #1 chosen from 1 choice [ 0.882309] hub 4-0:1.0: USB hub found [ 0.882374] hub 4-0:1.0: 6 ports detected [ 0.882482] uhci_hcd: USB Universal Host Controller Interface driver [ 0.882648] PNP: No PS/2 controller found. Probing ports directly. [ 0.883130] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.883197] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 0.883324] mice: PS/2 mouse device common for all mice [ 0.883465] rtc_cmos 00:07: RTC can wake from S4 [ 0.883556] rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0 [ 0.883670] rtc0: alarms up to one year, y3k, 114 bytes nvram, hpet irqs [ 0.883829] device-mapper: uevent: version 1.0.3 [ 0.883973] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com [ 0.884126] device-mapper: multipath: version 1.1.0 loaded [ 0.884190] device-mapper: multipath round-robin: version 1.0.0 loaded [ 0.884419] cpuidle: using governor ladder [ 0.884479] cpuidle: using governor menu [ 0.884888] TCP cubic registered [ 0.885052] NET: Registered protocol family 10 [ 0.885476] lo: Disabled Privacy Extensions [ 0.885756] NET: Registered protocol family 17 [ 0.885833] Bluetooth: L2CAP ver 2.13 [ 0.885892] Bluetooth: L2CAP socket layer initialized [ 0.885955] Bluetooth: SCO (Voice Link) ver 0.6 [ 0.886015] Bluetooth: SCO socket layer initialized [ 0.886108] Bluetooth: RFCOMM TTY layer initialized [ 0.886169] Bluetooth: RFCOMM socket layer initialized [ 0.886231] Bluetooth: RFCOMM ver 1.11 [ 0.886312] powernow-k8: Found 1 AMD Athlon(tm) 64 X2 Dual Core Processor 5000+ processors (2 cpu cores) (version 2.20.00) [ 0.886442] powernow-k8: 0 : fid 0x12 (2600 MHz), vid 0xb [ 0.886505] powernow-k8: 1 : fid 0x10 (2400 MHz), vid 0xd [ 0.886567] powernow-k8: 2 : fid 0xe (2200 MHz), vid 0xf [ 0.886630] powernow-k8: 3 : fid 0xc (2000 MHz), vid 0x11 [ 0.886692] powernow-k8: 4 : fid 0xa (1800 MHz), vid 0x11 [ 0.886754] powernow-k8: 5 : fid 0x2 (1000 MHz), vid 0x12 [ 0.886931] PM: Resume from disk failed. [ 0.886949] registered taskstats version 1 [ 0.887137] Magic number: 5:964:440 [ 0.887311] rtc_cmos 00:07: setting system clock to 2009-12-10 17:24:26 UTC (1260465866) [ 0.887391] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 0.887454] EDD information not available. [ 0.900308] ata7.00: ATAPI: HL-DT-ST DVDRAM GSA-4120B, A117, max UDMA/33 [ 0.900392] ata7: nv_mode_filter: 0x739f&0x739f->0x739f, BIOS=0x7000 (0xc0000000) ACPI=0x701f (60:900:0x11) [ 0.940250] ata7.00: configured for UDMA/33 [ 1.061263] usb 1-1: new high speed USB device using ehci_hcd and address 2 [ 1.071273] ata2: SATA link down (SStatus 0 SControl 300) [ 1.071353] ata4: SATA link down (SStatus 0 SControl 300) [ 1.071425] ata5: SATA link down (SStatus 0 SControl 300) [ 1.071497] ata6: SATA link down (SStatus 0 SControl 300) [ 1.213077] usb 1-1: configuration #1 chosen from 1 choice [ 1.213421] hub 1-1:1.0: USB hub found [ 1.213901] hub 1-1:1.0: 4 ports detected [ 1.250016] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1.250089] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1.251339] ata3.00: ATA-7: ST3750330AS, SD04, max UDMA/133 [ 1.251402] ata3.00: 1465149168 sectors, multi 16: LBA48 NCQ (depth 31/32) [ 1.251663] ata1.00: ATA-8: ST3750330AS, SD15, max UDMA/133 [ 1.251725] ata1.00: 1465149168 sectors, multi 16: LBA48 NCQ (depth 31/32) [ 1.253016] ata3.00: configured for UDMA/133 [ 1.253765] ata1.00: configured for UDMA/133 [ 1.253913] scsi 0:0:0:0: Direct-Access ATA ST3750330AS SD15 PQ: 0 ANSI: 5 [ 1.254088] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 1.254182] sd 0:0:0:0: [sda] 1465149168 512-byte logical blocks: (750 GB/698 GiB) [ 1.254295] sd 0:0:0:0: [sda] Write Protect is off [ 1.254356] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.254375] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.254558] sda: [ 1.254681] scsi 2:0:0:0: Direct-Access ATA ST3750330AS SD04 PQ: 0 ANSI: 5 [ 1.254896] sd 2:0:0:0: Attached scsi generic sg1 type 0 [ 1.254981] sd 2:0:0:0: [sdb] 1465149168 512-byte logical blocks: (750 GB/698 GiB) [ 1.255091] sd 2:0:0:0: [sdb] Write Protect is off [ 1.255153] sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 1.255173] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.255331] sdb: [ 1.259278] scsi 6:0:0:0: CD-ROM HL-DT-ST DVDRAM GSA-4120B A117 PQ: 0 ANSI: 5 [ 1.266196] sda1 sda2 [ 1.266511] sd 0:0:0:0: [sda] Attached SCSI disk [ 1.271908] sdb1 sdb2 [ 1.272202] sd 2:0:0:0: [sdb] Attached SCSI disk [ 1.272269] sr0: scsi3-mmc drive: 40x/40x writer dvd-ram cd/rw xa/form2 cdda tray [ 1.272347] Uniform CD-ROM driver Revision: 3.20 [ 1.272459] sr 6:0:0:0: Attached scsi CD-ROM sr0 [ 1.272495] sr 6:0:0:0: Attached scsi generic sg2 type 5 [ 1.272592] ata8: port disabled. ignoring. [ 1.272620] Freeing unused kernel memory: 660k freed [ 1.272964] Write protecting the kernel read-only data: 7580k [ 1.385229] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.64. [ 1.385767] ACPI: PCI Interrupt Link [LMAC] enabled at IRQ 22 [ 1.385833] forcedeth 0000:00:0a.0: PCI INT A -> Link[LMAC] -> GSI 22 (level, low) -> IRQ 22 [ 1.385915] forcedeth 0000:00:0a.0: setting latency timer to 64 [ 1.391386] usb 2-2: new high speed USB device using ehci_hcd and address 3 [ 1.413795] Floppy drive(s): fd0 is 1.44M [ 1.439625] [Firmware Bug]: ACPI(IGPU) defines _DOD but not _DOS [ 1.439916] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A03:00/device:12/device:13/input/input3 [ 1.440033] ACPI: Video Device [IGPU] (multi-head: yes rom: no post: no) [ 1.464278] FDC 0 is a post-1991 82077 [ 1.471315] forcedeth 0000:00:0a.0: ifname eth0, PHY OUI 0x732 @ 3, addr 00:1f:c6:de:f5:61 [ 1.471405] forcedeth 0000:00:0a.0: highdma csum pwrctl mgmt gbit lnktim msi desc-v3 [ 1.714814] usb 2-2: configuration #1 chosen from 1 choice [ 2.147926] xor: automatically using best checksumming function: generic_sse [ 2.191252] generic_sse: 8133.600 MB/sec [ 2.191314] xor: using function: generic_sse (8133.600 MB/sec) [ 2.193497] device-mapper: dm-raid45: initialized v0.2594b [ 2.232034] usb 4-1: new low speed USB device using ohci_hcd and address 2 [ 2.475295] usb 4-1: configuration #1 chosen from 1 choice [ 2.482876] usbcore: registered new interface driver hiddev [ 2.493516] input: Microsoft Comfort Curve Keyboard 2000 as /devices/pci0000:00/0000:00:04.0/usb4/4-1/4-1:1.0/input/input4 [ 2.493662] generic-usb 0003:045E:00DD.0001: input,hidraw0: USB HID v1.11 Keyboard [Microsoft Comfort Curve Keyboard 2000] on usb-0000:00:04.0-1/input0 [ 2.511318] input: Microsoft Comfort Curve Keyboard 2000 as /devices/pci0000:00/0000:00:04.0/usb4/4-1/4-1:1.1/input/input5 [ 2.511457] generic-usb 0003:045E:00DD.0002: input,hidraw1: USB HID v1.11 Device [Microsoft Comfort Curve Keyboard 2000] on usb-0000:00:04.0-1/input1 [ 2.511560] usbcore: registered new interface driver usbhid [ 2.511623] usbhid: v2.6:USB HID core driver [ 2.762077] EXT4-fs (loop0): barriers enabled [ 2.779465] kjournald2 starting: pid 945, dev loop0:8, commit interval 5 seconds [ 2.779560] EXT4-fs (loop0): delayed allocation enabled [ 2.779701] EXT4-fs: file extents enabled [ 2.780112] EXT4-fs: mballoc enabled [ 2.780184] EXT4-fs (loop0): mounted filesystem with ordered data mode [ 2.811288] usb 4-3: new full speed USB device using ohci_hcd and address 3 [ 3.529497] type=1505 audit(1260465869.132:2): operation="profile_load" pid=972 name=/usr/share/gdm/guest-session/Xsession [ 3.531599] type=1505 audit(1260465869.142:3): operation="profile_load" pid=973 name=/sbin/dhclient3 [ 3.531914] type=1505 audit(1260465869.142:4): operation="profile_load" pid=973 name=/usr/lib/NetworkManager/nm-dhcp-client.action [ 3.532131] type=1505 audit(1260465869.142:5): operation="profile_load" pid=973 name=/usr/lib/connman/scripts/dhclient-script [ 3.621546] type=1505 audit(1260465869.232:6): operation="profile_load" pid=974 name=/usr/bin/evince [ 3.625489] type=1505 audit(1260465869.232:7): operation="profile_load" pid=974 name=/usr/bin/evince-previewer [ 3.627967] type=1505 audit(1260465869.232:8): operation="profile_load" pid=974 name=/usr/bin/evince-thumbnailer [ 3.657098] type=1505 audit(1260465869.262:9): operation="profile_load" pid=976 name=/usr/lib/cups/backend/cups-pdf [ 3.657474] type=1505 audit(1260465869.262:10): operation="profile_load" pid=976 name=/usr/sbin/cupsd [ 4.678232] udev: starting version 147 [ 5.884543] k8temp 0000:00:18.3: Temperature readouts might be wrong - check erratum #141 [ 5.977022] EDAC MC: Ver: 2.1.0 Oct 16 2009 [ 6.021775] EDAC amd64_edac: Ver: 3.2.0 Oct 16 2009 [ 6.021977] EDAC amd64: This node reports that Memory ECC is currently disabled. [ 6.021982] EDAC amd64: bit 0x400000 in register F3x44 of the MISC_CONTROL device (0000:00:18.3) should be enabled [ 6.021985] EDAC amd64: WARNING: ECC is NOT currently enabled by the BIOS. Module will NOT be loaded. [ 6.021986] Either Enable ECC in the BIOS, or use the 'ecc_enable_override' parameter. [ 6.021987] Might be a BIOS bug, if BIOS says ECC is enabled [ 6.021988] Use of the override can cause unknown side effects. [ 6.022006] amd64_edac: probe of 0000:00:18.2 failed with error -22 [ 6.031616] i2c-adapter i2c-0: nForce2 SMBus adapter at 0x600 [ 6.031620] ACPI: I/O resource nForce2_smbus [0x700-0x73f] conflicts with ACPI region SM00 [0x700-0x73f] [ 6.031705] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 6.031707] nForce2_smbus 0000:00:01.1: Error probing SMB2. [ 6.070368] lp: driver loaded but no devices found [ 6.086245] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 6.149400] ip_tables: (C) 2000-2006 Netfilter Core Team [ 6.181625] Linux video capture interface: v2.00 [ 7.137605] nvidia: module license 'NVIDIA' taints kernel. [ 7.137609] Disabling lock debugging due to kernel taint [ 7.155571] nf_conntrack version 0.5.0 (16384 buckets, 65536 max) [ 7.155782] CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use [ 7.155784] nf_conntrack.acct=1 kernel parameter, acct=1 nf_conntrack module option or [ 7.155786] sysctl net.netfilter.nf_conntrack_acct=1 to enable it. [ 7.158928] uvcvideo: Found UVC 1.00 device (046d:08c1) [ 7.307539] ip6_tables: (C) 2000-2006 Netfilter Core Team [ 7.418842] ACPI: PCI Interrupt Link [SGRU] enabled at IRQ 21 [ 7.418848] nvidia 0000:02:00.0: PCI INT A -> Link[SGRU] -> GSI 21 (level, low) -> IRQ 21 [ 7.418855] nvidia 0000:02:00.0: setting latency timer to 64 [ 7.423728] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 185.18.36 Fri Aug 14 17:35:21 PDT 2009 [ 7.631488] HDA Intel 0000:00:07.0: power state changed by ACPI to D0 [ 7.631877] ACPI: PCI Interrupt Link [LAZA] enabled at IRQ 20 [ 7.631882] HDA Intel 0000:00:07.0: PCI INT A -> Link[LAZA] -> GSI 20 (level, low) -> IRQ 20 [ 7.631975] HDA Intel 0000:00:07.0: setting latency timer to 64 [ 8.160106] uvcvideo: UVC non compliance - GET_DEF(PROBE) not supported. Enabling workaround. [ 9.175522] uvcvideo: Failed to query (129) UVC probe control : -110 (exp. 26). [ 9.175603] uvcvideo: Failed to initialize the device (-5). [ 9.175728] usbcore: registered new interface driver uvcvideo [ 9.175731] USB Video Class driver (v0.1.0) [ 10.121482] 3:3:3: cannot set freq 16000 to ep 0x86 [ 10.184417] usbcore: registered new interface driver snd-usb-audio [ 10.646192] Adding 262136k swap on /host/ubuntu/disks/swap.disk. Priority:-1 extents:318 across:24639792k [ 10.697707] EXT4-fs (loop0): internal journal on loop0:8 [ 12.553989] __ratelimit: 3 callbacks suppressed [ 12.553992] type=1505 audit(1260462278.163:12): operation="profile_replace" pid=1736 name=/usr/share/gdm/guest-session/Xsession [ 12.555744] type=1505 audit(1260462278.163:13): operation="profile_replace" pid=1737 name=/sbin/dhclient3 [ 12.555985] type=1505 audit(1260462278.163:14): operation="profile_replace" pid=1737 name=/usr/lib/NetworkManager/nm-dhcp-client.action [ 12.556125] type=1505 audit(1260462278.163:15): operation="profile_replace" pid=1737 name=/usr/lib/connman/scripts/dhclient-script [ 12.559951] type=1505 audit(1260462278.163:16): operation="profile_replace" pid=1738 name=/usr/bin/evince [ 12.563840] type=1505 audit(1260462278.173:17): operation="profile_replace" pid=1738 name=/usr/bin/evince-previewer [ 12.566162] type=1505 audit(1260462278.173:18): operation="profile_replace" pid=1738 name=/usr/bin/evince-thumbnailer [ 12.572315] type=1505 audit(1260462278.183:19): operation="profile_replace" pid=1741 name=/usr/lib/cups/backend/cups-pdf [ 12.572613] type=1505 audit(1260462278.183:20): operation="profile_replace" pid=1741 name=/usr/sbin/cupsd [ 12.574499] type=1505 audit(1260462278.183:21): operation="profile_replace" pid=1744 name=/usr/sbin/tcpdump [ 13.041412] usb 4-3: configuration #1 chosen from 1 choice [ 13.171405] Bluetooth: Generic Bluetooth USB driver ver 0.5 [ 13.171510] usbcore: registered new interface driver btusb [ 13.391293] usb 4-4: new low speed USB device using ohci_hcd and address 4 [ 13.620282] usb 4-4: configuration #1 chosen from 1 choice [ 13.641556] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:04.0/usb4/4-4/4-4:1.0/input/input6 [ 13.641637] generic-usb 0003:046D:C518.0003: input,hidraw2: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:04.0-4/input0 [ 13.654329] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:04.0/usb4/4-4/4-4:1.1/input/input7 [ 13.654429] generic-usb 0003:046D:C518.0004: input,hiddev96,hidraw3: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:04.0-4/input1 [ 14.010513] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 14.010516] Bluetooth: BNEP filters: protocol multicast [ 14.187040] Bridge firewalling registered