[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.31-14-generic (buildd@rothera) (gcc version 4.4.1 (Ubuntu 4.4.1-4ubuntu8) ) #48-Ubuntu SMP Fri Oct 16 14:04:26 UTC 2009 (Ubuntu 2.6.31-14.48-generic) [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] NSC Geode by NSC [ 0.000000] Cyrix CyrixInstead [ 0.000000] Centaur CentaurHauls [ 0.000000] Transmeta GenuineTMx86 [ 0.000000] Transmeta TransmetaCPU [ 0.000000] UMC UMC UMC UMC [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f000 (usable) [ 0.000000] BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 00000000bfe72000 (usable) [ 0.000000] BIOS-e820: 00000000bfe72000 - 00000000c0000000 (reserved) [ 0.000000] BIOS-e820: 00000000f8000000 - 00000000fc000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) [ 0.000000] BIOS-e820: 00000000fed18000 - 00000000fed1c000 (reserved) [ 0.000000] BIOS-e820: 00000000fed20000 - 00000000fed90000 (reserved) [ 0.000000] BIOS-e820: 00000000feda0000 - 00000000feda6000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee10000 (reserved) [ 0.000000] BIOS-e820: 00000000ffe00000 - 0000000100000000 (reserved) [ 0.000000] DMI 2.4 present. [ 0.000000] last_pfn = 0xbfe72 max_arch_pfn = 0x100000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-CFFFF write-protect [ 0.000000] D0000-EFFFF uncachable [ 0.000000] F0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000 mask F80000000 write-back [ 0.000000] 1 base 080000000 mask FC0000000 write-back [ 0.000000] 2 base 0BFF00000 mask FFFF00000 uncachable [ 0.000000] 3 disabled [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] e820 update range: 0000000000002000 - 0000000000006000 (usable) ==> (reserved) [ 0.000000] Scanning 1 areas for low memory corruption [ 0.000000] modified physical RAM map: [ 0.000000] modified: 0000000000000000 - 0000000000002000 (usable) [ 0.000000] modified: 0000000000002000 - 0000000000006000 (reserved) [ 0.000000] modified: 0000000000006000 - 000000000009f000 (usable) [ 0.000000] modified: 000000000009f000 - 00000000000a0000 (reserved) [ 0.000000] modified: 0000000000100000 - 00000000bfe72000 (usable) [ 0.000000] modified: 00000000bfe72000 - 00000000c0000000 (reserved) [ 0.000000] modified: 00000000f8000000 - 00000000fc000000 (reserved) [ 0.000000] modified: 00000000fec00000 - 00000000fec10000 (reserved) [ 0.000000] modified: 00000000fed18000 - 00000000fed1c000 (reserved) [ 0.000000] modified: 00000000fed20000 - 00000000fed90000 (reserved) [ 0.000000] modified: 00000000feda0000 - 00000000feda6000 (reserved) [ 0.000000] modified: 00000000fee00000 - 00000000fee10000 (reserved) [ 0.000000] modified: 00000000ffe00000 - 0000000100000000 (reserved) [ 0.000000] initial memory mapped : 0 - 00c00000 [ 0.000000] init_memory_mapping: 0000000000000000-00000000377fe000 [ 0.000000] Using x86 segment limits to approximate NX protection [ 0.000000] 0000000000 - 0000400000 page 4k [ 0.000000] 0000400000 - 0037400000 page 2M [ 0.000000] 0037400000 - 00377fe000 page 4k [ 0.000000] kernel direct mapping tables up to 377fe000 @ 7000-c000 [ 0.000000] RAMDISK: 37815000 - 37fefb62 [ 0.000000] Allocated new RAMDISK: 008ad000 - 01087b62 [ 0.000000] Move RAMDISK from 0000000037815000 - 0000000037fefb61 to 008ad000 - 01087b61 [ 0.000000] ACPI: RSDP 000fbc90 00024 (v02 DELL ) [ 0.000000] ACPI: XSDT bfe73a00 00064 (v01 DELL M08 27D80B13 ASL 00000061) [ 0.000000] ACPI: FACP bfe7389c 000F4 (v04 DELL M08 27D80B13 ASL 00000061) [ 0.000000] ACPI: DSDT bfe74000 04BC2 (v02 INT430 SYSFexxx 00001001 INTL 20050624) [ 0.000000] ACPI: FACS bfe82800 00040 [ 0.000000] ACPI: HPET bfe73b00 00038 (v01 DELL M08 00000001 ASL 00000061) [ 0.000000] ACPI: APIC bfe73c00 00068 (v01 DELL M08 27D80B13 ASL 00000047) [ 0.000000] ACPI: MCFG bfe73bc0 0003E (v16 DELL M08 27D80B13 ASL 00000061) [ 0.000000] ACPI: SLIC bfe73c9c 00176 (v01 DELL M08 27D80B13 ASL 00000061) [ 0.000000] ACPI: OSFR bfe73200 0002C (v01 DELL M08 27D80B13 ASL 00000061) [ 0.000000] ACPI: BOOT bfe737c0 00028 (v01 DELL M08 27D80B13 ASL 00000061) [ 0.000000] ACPI: SSDT bfe7217e 004CC (v01 PmRef CpuPm 00003000 INTL 20050624) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] 2182MB HIGHMEM available. [ 0.000000] 887MB LOWMEM available. [ 0.000000] mapped low ram: 0 - 377fe000 [ 0.000000] low ram: 0 - 377fe000 [ 0.000000] node 0 low ram: 00000000 - 377fe000 [ 0.000000] node 0 bootmap 00008000 - 0000ef00 [ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 00377fe000] [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] [ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000] [ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000] [ 0.000000] #3 [0000100000 - 00008a80a0] TEXT DATA BSS ==> [0000100000 - 00008a80a0] [ 0.000000] #4 [000009f000 - 0000100000] BIOS reserved ==> [000009f000 - 0000100000] [ 0.000000] #5 [00008a9000 - 00008ac188] BRK ==> [00008a9000 - 00008ac188] [ 0.000000] #6 [0000007000 - 0000008000] PGTABLE ==> [0000007000 - 0000008000] [ 0.000000] #7 [00008ad000 - 0001087b62] NEW RAMDISK ==> [00008ad000 - 0001087b62] [ 0.000000] #8 [0000008000 - 000000f000] BOOTMAP ==> [0000008000 - 000000f000] [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000000 -> 0x00001000 [ 0.000000] Normal 0x00001000 -> 0x000377fe [ 0.000000] HighMem 0x000377fe -> 0x000bfe72 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[3] active PFN ranges [ 0.000000] 0: 0x00000000 -> 0x00000002 [ 0.000000] 0: 0x00000006 -> 0x0000009f [ 0.000000] 0: 0x00000100 -> 0x000bfe72 [ 0.000000] On node 0 totalpages: 785933 [ 0.000000] free_area_init_node: node 0, pgdat c0784900, node_mem_map c1088000 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 3963 pages, LIFO batch:0 [ 0.000000] Normal zone: 1744 pages used for memmap [ 0.000000] Normal zone: 221486 pages, LIFO batch:31 [ 0.000000] HighMem zone: 4365 pages used for memmap [ 0.000000] HighMem zone: 554343 pages, LIFO batch:31 [ 0.000000] Using APIC driver default [ 0.000000] ACPI: PM-Timer IO Port: 0x1008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: Skipping IOAPIC probe due to 'noapic' option. [ 0.000000] Using ACPI for processor (LAPIC) configuration information [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs [ 0.000000] nr_irqs_gsi: 16 [ 0.000000] PM: Registered nosave memory: 0000000000002000 - 0000000000006000 [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 0000000000100000 [ 0.000000] Allocating PCI resources starting at c0000000 (gap: c0000000:38000000) [ 0.000000] NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 14 pages at c2898000, static data 35612 bytes [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 779792 [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.31-14-generic root=UUID=4a9059ec-4a78-4c66-a182-c80de0df63a9 ro quiet splash noapic [ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Enabling fast FPU save and restore... done. [ 0.000000] Enabling unmasked SIMD FPU exception support... done. [ 0.000000] Initializing CPU#0 [ 0.000000] allocated 15720680 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] Initializing HighMem for node 0 (000377fe:000bfe72) [ 0.000000] Memory: 3086020k/3144136k available (4565k kernel code, 56832k reserved, 2143k data, 540k init, 2234832k highmem) [ 0.000000] virtual kernel memory layout: [ 0.000000] fixmap : 0xfff1d000 - 0xfffff000 ( 904 kB) [ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB) [ 0.000000] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB) [ 0.000000] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB) [ 0.000000] .init : 0xc078e000 - 0xc0815000 ( 540 kB) [ 0.000000] .data : 0xc0575554 - 0xc078d308 (2143 kB) [ 0.000000] .text : 0xc0100000 - 0xc0575554 (4565 kB) [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.000000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 [ 0.000000] NR_IRQS:2304 nr_irqs:288 [ 0.000000] Extended CMOS year: 2000 [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 2493.956 MHz processor. [ 0.002908] Console: colour VGA+ 80x25 [ 0.002911] console [tty0] enabled [ 0.003051] hpet clockevent registered [ 0.003054] HPET: 3 timers in total, 0 timers will be used for per-cpu timer [ 0.003058] Calibrating delay loop (skipped), value calculated using timer frequency.. 4987.91 BogoMIPS (lpj=9975824) [ 0.003074] Security Framework initialized [ 0.003092] AppArmor: AppArmor initialized [ 0.003098] Mount-cache hash table entries: 512 [ 0.003211] Initializing cgroup subsys ns [ 0.003216] Initializing cgroup subsys cpuacct [ 0.003219] Initializing cgroup subsys memory [ 0.003225] Initializing cgroup subsys freezer [ 0.003227] Initializing cgroup subsys net_cls [ 0.003240] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.003242] CPU: L2 cache: 6144K [ 0.003244] CPU: Physical Processor ID: 0 [ 0.003246] CPU: Processor Core ID: 0 [ 0.003249] mce: CPU supports 6 MCE banks [ 0.003256] CPU0: Thermal monitoring enabled (TM2) [ 0.003259] using mwait in idle threads. [ 0.003265] Performance Counters: Core2 events, Intel PMU driver. [ 0.003272] ... version: 2 [ 0.003273] ... bit width: 40 [ 0.003275] ... generic counters: 2 [ 0.003276] ... value mask: 000000ffffffffff [ 0.003278] ... max period: 000000007fffffff [ 0.003279] ... fixed-purpose counters: 3 [ 0.003280] ... counter mask: 0000000700000003 [ 0.003284] Checking 'hlt' instruction... OK. [ 0.018254] ACPI: Core revision 20090521 [ 0.024382] ACPI: setting ELCR to 0200 (from 0ea0) [ 0.028051] CPU0: Intel(R) Core(TM)2 Duo CPU T9300 @ 2.50GHz stepping 06 [ 0.032001] Booting processor 1 APIC 0x1 ip 0x6000 [ 0.004000] Initializing CPU#1 [ 0.004000] Calibrating delay using timer specific routine.. 4987.44 BogoMIPS (lpj=9974882) [ 0.004000] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.004000] CPU: L2 cache: 6144K [ 0.004000] CPU: Physical Processor ID: 0 [ 0.004000] CPU: Processor Core ID: 1 [ 0.004000] mce: CPU supports 6 MCE banks [ 0.004000] CPU1: Thermal monitoring enabled (TM2) [ 0.004000] x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106 [ 0.117798] CPU1: Intel(R) Core(TM)2 Duo CPU T9300 @ 2.50GHz stepping 06 [ 0.117811] checking TSC synchronization [CPU#0 -> CPU#1]: passed. [ 0.120019] Brought up 2 CPUs [ 0.120021] Total of 2 processors activated (9975.35 BogoMIPS). [ 0.120030] CPU0 attaching sched-domain: [ 0.120032] domain 0: span 0-1 level MC [ 0.120034] groups: 0 1 [ 0.120038] CPU1 attaching sched-domain: [ 0.120040] domain 0: span 0-1 level MC [ 0.120042] groups: 1 0 [ 0.120107] Booting paravirtualized kernel on bare hardware [ 0.120170] regulator: core version 0.5 [ 0.120170] Time: 15:10:13 Date: 11/29/09 [ 0.120170] NET: Registered protocol family 16 [ 0.120179] EISA bus registered [ 0.120188] ACPI: bus type pci registered [ 0.120244] PCI: MCFG configuration 0: base f8000000 segment 0 buses 0 - 63 [ 0.120247] PCI: MCFG area at f8000000 reserved in E820 [ 0.120248] PCI: Using MMCONFIG for extended config space [ 0.120250] PCI: Using configuration type 1 for base access [ 0.121039] bio: create slab at 0 [ 0.121039] ACPI: EC: Look up EC in DSDT [ 0.142042] ACPI: Interpreter enabled [ 0.142047] ACPI: (supports S0 S3 S4 S5) [ 0.142061] ACPI: Using PIC for interrupt routing [ 0.176960] ACPI: No dock devices found. [ 0.191585] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 0.191680] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold [ 0.191683] pci 0000:00:01.0: PME# disabled [ 0.191770] pci 0000:00:1a.0: reg 20 io port: [0x6f20-0x6f3f] [ 0.191835] pci 0000:00:1a.1: reg 20 io port: [0x6f00-0x6f1f] [ 0.191906] pci 0000:00:1a.7: reg 10 32bit mmio: [0xfed1c400-0xfed1c7ff] [ 0.191971] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold [ 0.191976] pci 0000:00:1a.7: PME# disabled [ 0.192038] pci 0000:00:1b.0: reg 10 64bit mmio: [0xf6ffc000-0xf6ffffff] [ 0.192100] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.192104] pci 0000:00:1b.0: PME# disabled [ 0.192192] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.192196] pci 0000:00:1c.0: PME# disabled [ 0.192287] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold [ 0.192291] pci 0000:00:1c.1: PME# disabled [ 0.192385] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold [ 0.192389] pci 0000:00:1c.4: PME# disabled [ 0.192454] pci 0000:00:1d.0: reg 20 io port: [0x6f80-0x6f9f] [ 0.192519] pci 0000:00:1d.1: reg 20 io port: [0x6f60-0x6f7f] [ 0.192583] pci 0000:00:1d.2: reg 20 io port: [0x6f40-0x6f5f] [ 0.192656] pci 0000:00:1d.7: reg 10 32bit mmio: [0xfed1c000-0xfed1c3ff] [ 0.192720] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold [ 0.192725] pci 0000:00:1d.7: PME# disabled [ 0.192895] pci 0000:00:1f.0: quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO [ 0.192899] pci 0000:00:1f.0: quirk: region 1080-10bf claimed by ICH6 GPIO [ 0.192902] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0900 (mask 007f) [ 0.192906] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 006c (mask 0007) [ 0.192910] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 0c80 (mask 003f) [ 0.192964] pci 0000:00:1f.1: reg 10 io port: [0x1f0-0x1f7] [ 0.192972] pci 0000:00:1f.1: reg 14 io port: [0x3f4-0x3f7] [ 0.192980] pci 0000:00:1f.1: reg 18 io port: [0x170-0x177] [ 0.192987] pci 0000:00:1f.1: reg 1c io port: [0x374-0x377] [ 0.192995] pci 0000:00:1f.1: reg 20 io port: [0x6fa0-0x6faf] [ 0.193051] pci 0000:00:1f.2: reg 10 io port: [0x6eb0-0x6eb7] [ 0.193059] pci 0000:00:1f.2: reg 14 io port: [0x6eb8-0x6ebb] [ 0.193067] pci 0000:00:1f.2: reg 18 io port: [0x6ec0-0x6ec7] [ 0.193074] pci 0000:00:1f.2: reg 1c io port: [0x6ec8-0x6ecb] [ 0.193082] pci 0000:00:1f.2: reg 20 io port: [0x6ee0-0x6eef] [ 0.193090] pci 0000:00:1f.2: reg 24 io port: [0xeff0-0xefff] [ 0.193120] pci 0000:00:1f.2: PME# supported from D3hot [ 0.193124] pci 0000:00:1f.2: PME# disabled [ 0.193151] pci 0000:00:1f.3: reg 10 32bit mmio: [0xf6ffbf00-0xf6ffbfff] [ 0.193176] pci 0000:00:1f.3: reg 20 io port: [0x10c0-0x10df] [ 0.193253] pci 0000:01:00.0: reg 10 32bit mmio: [0xf5000000-0xf5ffffff] [ 0.193268] pci 0000:01:00.0: reg 14 64bit mmio: [0xe0000000-0xefffffff] [ 0.193284] pci 0000:01:00.0: reg 1c 64bit mmio: [0xf2000000-0xf3ffffff] [ 0.193293] pci 0000:01:00.0: reg 24 io port: [0xdf00-0xdf7f] [ 0.193301] pci 0000:01:00.0: reg 30 32bit mmio: [0x000000-0x01ffff] [ 0.193410] pci 0000:00:01.0: bridge io port: [0xd000-0xdfff] [ 0.193413] pci 0000:00:01.0: bridge 32bit mmio: [0xf2000000-0xf6efffff] [ 0.193418] pci 0000:00:01.0: bridge 64bit mmio pref: [0xe0000000-0xefffffff] [ 0.193496] pci 0000:09:00.0: reg 10 64bit mmio: [0xf1ffc000-0xf1ffffff] [ 0.193507] pci 0000:09:00.0: reg 18 io port: [0xce00-0xceff] [ 0.193596] pci 0000:09:00.0: supports D1 D2 [ 0.193598] pci 0000:09:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.193604] pci 0000:09:00.0: PME# disabled [ 0.193684] pci 0000:00:1c.0: bridge io port: [0xc000-0xcfff] [ 0.193688] pci 0000:00:1c.0: bridge 32bit mmio: [0xf1f00000-0xf1ffffff] [ 0.193877] pci 0000:0b:00.0: reg 10 32bit mmio: [0xf1eff000-0xf1efffff] [ 0.194120] pci 0000:0b:00.0: PME# supported from D0 D3hot D3cold [ 0.194132] pci 0000:0b:00.0: PME# disabled [ 0.194250] pci 0000:00:1c.1: bridge 32bit mmio: [0xf1e00000-0xf1efffff] [ 0.194317] pci 0000:00:1c.4: bridge io port: [0xb000-0xbfff] [ 0.194321] pci 0000:00:1c.4: bridge 32bit mmio: [0xf1c00000-0xf1dfffff] [ 0.194329] pci 0000:00:1c.4: bridge 64bit mmio pref: [0xf0000000-0xf01fffff] [ 0.194390] pci 0000:03:09.0: reg 10 32bit mmio: [0xf1bff800-0xf1bfffff] [ 0.194449] pci 0000:03:09.0: supports D1 D2 [ 0.194451] pci 0000:03:09.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.194455] pci 0000:03:09.0: PME# disabled [ 0.194498] pci 0000:03:09.1: reg 10 32bit mmio: [0xf1bff500-0xf1bff5ff] [ 0.194558] pci 0000:03:09.1: supports D1 D2 [ 0.194560] pci 0000:03:09.1: PME# supported from D0 D1 D2 D3hot D3cold [ 0.194564] pci 0000:03:09.1: PME# disabled [ 0.194607] pci 0000:03:09.2: reg 10 32bit mmio: [0xf1bff600-0xf1bff6ff] [ 0.194668] pci 0000:03:09.2: supports D1 D2 [ 0.194669] pci 0000:03:09.2: PME# supported from D0 D1 D2 D3hot D3cold [ 0.194674] pci 0000:03:09.2: PME# disabled [ 0.194717] pci 0000:03:09.3: reg 10 32bit mmio: [0xf1bff700-0xf1bff7ff] [ 0.194778] pci 0000:03:09.3: supports D1 D2 [ 0.194780] pci 0000:03:09.3: PME# supported from D0 D1 D2 D3hot D3cold [ 0.194785] pci 0000:03:09.3: PME# disabled [ 0.194841] pci 0000:00:1e.0: transparent bridge [ 0.194848] pci 0000:00:1e.0: bridge 32bit mmio: [0xf1b00000-0xf1bfffff] [ 0.194883] pci_bus 0000:00: on NUMA node 0 [ 0.194887] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.195227] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIE._PRT] [ 0.195341] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT] [ 0.195396] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT] [ 0.195468] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT] [ 0.195543] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP05._PRT] [ 0.203867] ACPI: PCI Interrupt Link [LNKA] (IRQs 9 10 11) *7 [ 0.203961] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 7) *10 [ 0.204064] ACPI: PCI Interrupt Link [LNKC] (IRQs 9 10 11) *5 [ 0.204145] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 7 9 10 11) *0, disabled. [ 0.204238] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11 12 14 15) [ 0.204333] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 *10 11 12 14 15) [ 0.204427] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 *9 10 11 12 14 15) [ 0.204510] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. [ 0.204649] SCSI subsystem initialized [ 0.204665] libata version 3.00 loaded. [ 0.204665] usbcore: registered new interface driver usbfs [ 0.204665] usbcore: registered new interface driver hub [ 0.204665] usbcore: registered new device driver usb [ 0.204665] ACPI: WMI: Mapper loaded [ 0.204665] PCI: Using ACPI for IRQ routing [ 0.216006] Bluetooth: Core ver 2.15 [ 0.216017] NET: Registered protocol family 31 [ 0.216017] Bluetooth: HCI device and connection manager initialized [ 0.216017] Bluetooth: HCI socket layer initialized [ 0.216017] NetLabel: Initializing [ 0.216017] NetLabel: domain hash size = 128 [ 0.216018] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.216027] NetLabel: unlabeled traffic allowed by default [ 0.216052] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 0.216056] hpet0: 3 comparators, 64-bit 14.318180 MHz counter [ 0.232005] pnp: PnP ACPI init [ 0.232011] ACPI: bus type pnp registered [ 0.246792] pnp 00:0a: io resource (0x1000-0x1005) overlaps 0000:00:1f.0 BAR 13 (0x1000-0x107f), disabling [ 0.246795] pnp 00:0a: io resource (0x1008-0x100f) overlaps 0000:00:1f.0 BAR 13 (0x1000-0x107f), disabling [ 0.246863] pnp 00:0b: io resource (0x1006-0x1007) overlaps 0000:00:1f.0 BAR 13 (0x1000-0x107f), disabling [ 0.246866] pnp 00:0b: io resource (0x100a-0x1059) overlaps 0000:00:1f.0 BAR 13 (0x1000-0x107f), disabling [ 0.246868] pnp 00:0b: io resource (0x1010-0x102f) overlaps 0000:00:1f.0 BAR 13 (0x1000-0x107f), disabling [ 0.263306] pnp: PnP ACPI: found 13 devices [ 0.263308] ACPI: ACPI bus type pnp unregistered [ 0.263310] PnPBIOS: Disabled by ACPI PNP [ 0.263318] system 00:01: iomem range 0xff800000-0xff8fffff has been reserved [ 0.263320] system 00:01: iomem range 0xffc00000-0xffcfffff has been reserved [ 0.263326] system 00:06: ioport range 0xc80-0xcff could not be reserved [ 0.263331] system 00:09: iomem range 0xfed00000-0xfed003ff has been reserved [ 0.263336] system 00:0a: ioport range 0x900-0x97f has been reserved [ 0.263338] system 00:0a: ioport range 0x4d0-0x4d1 has been reserved [ 0.263343] system 00:0b: ioport range 0xf400-0xf4fe has been reserved [ 0.263345] system 00:0b: ioport range 0x1080-0x10bf has been reserved [ 0.263347] system 00:0b: ioport range 0x10c0-0x10df has been reserved [ 0.263350] system 00:0b: ioport range 0x809-0x809 has been reserved [ 0.263354] system 00:0c: iomem range 0x0-0x9efff could not be reserved [ 0.263357] system 00:0c: iomem range 0x9f000-0x9ffff could not be reserved [ 0.263359] system 00:0c: iomem range 0xc0000-0xcffff could not be reserved [ 0.263361] system 00:0c: iomem range 0xe0000-0xfffff could not be reserved [ 0.263364] system 00:0c: iomem range 0x100000-0xbfe71fff could not be reserved [ 0.263366] system 00:0c: iomem range 0xbfe72000-0xbfefffff has been reserved [ 0.263368] system 00:0c: iomem range 0xbff00000-0xbfffffff has been reserved [ 0.263370] system 00:0c: iomem range 0xffe00000-0xffffffff has been reserved [ 0.263373] system 00:0c: iomem range 0xffa00000-0xffbfffff has been reserved [ 0.263375] system 00:0c: iomem range 0xfec00000-0xfec0ffff has been reserved [ 0.263377] system 00:0c: iomem range 0xfee00000-0xfee0ffff has been reserved [ 0.263380] system 00:0c: iomem range 0xfed20000-0xfed8ffff has been reserved [ 0.263382] system 00:0c: iomem range 0xfeda0000-0xfeda3fff has been reserved [ 0.263384] system 00:0c: iomem range 0xfeda4000-0xfeda4fff has been reserved [ 0.263386] system 00:0c: iomem range 0xfeda5000-0xfeda5fff has been reserved [ 0.263389] system 00:0c: iomem range 0xfeda6000-0xfeda6fff has been reserved [ 0.263391] system 00:0c: iomem range 0xfed18000-0xfed1bfff has been reserved [ 0.263393] system 00:0c: iomem range 0xf8000000-0xfbffffff has been reserved [ 0.298024] AppArmor: AppArmor Filesystem Enabled [ 0.298082] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01 [ 0.298084] pci 0000:00:01.0: IO window: 0xd000-0xdfff [ 0.298088] pci 0000:00:01.0: MEM window: 0xf2000000-0xf6efffff [ 0.298091] pci 0000:00:01.0: PREFETCH window: 0x000000e0000000-0x000000efffffff [ 0.298095] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:09 [ 0.298099] pci 0000:00:1c.0: IO window: 0xc000-0xcfff [ 0.298105] pci 0000:00:1c.0: MEM window: 0xf1f00000-0xf1ffffff [ 0.298109] pci 0000:00:1c.0: PREFETCH window: disabled [ 0.298114] pci 0000:00:1c.1: PCI bridge, secondary bus 0000:0b [ 0.298115] pci 0000:00:1c.1: IO window: disabled [ 0.298121] pci 0000:00:1c.1: MEM window: 0xf1e00000-0xf1efffff [ 0.298125] pci 0000:00:1c.1: PREFETCH window: disabled [ 0.298130] pci 0000:00:1c.4: PCI bridge, secondary bus 0000:0c [ 0.298133] pci 0000:00:1c.4: IO window: 0xb000-0xbfff [ 0.298139] pci 0000:00:1c.4: MEM window: 0xf1c00000-0xf1dfffff [ 0.298144] pci 0000:00:1c.4: PREFETCH window: 0x000000f0000000-0x000000f01fffff [ 0.298152] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:03 [ 0.298153] pci 0000:00:1e.0: IO window: disabled [ 0.298159] pci 0000:00:1e.0: MEM window: 0xf1b00000-0xf1bfffff [ 0.298163] pci 0000:00:1e.0: PREFETCH window: disabled [ 0.298294] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11 [ 0.298296] PCI: setting IRQ 11 as level-triggered [ 0.298302] pci 0000:00:01.0: PCI INT A -> Link[LNKA] -> GSI 11 (level, low) -> IRQ 11 [ 0.298305] pci 0000:00:01.0: setting latency timer to 64 [ 0.298313] pci 0000:00:1c.0: PCI INT A -> Link[LNKA] -> GSI 11 (level, low) -> IRQ 11 [ 0.298318] pci 0000:00:1c.0: setting latency timer to 64 [ 0.298441] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 7 [ 0.298443] PCI: setting IRQ 7 as level-triggered [ 0.298448] pci 0000:00:1c.1: PCI INT B -> Link[LNKB] -> GSI 7 (level, low) -> IRQ 7 [ 0.298453] pci 0000:00:1c.1: setting latency timer to 64 [ 0.298462] pci 0000:00:1c.4: PCI INT A -> Link[LNKA] -> GSI 11 (level, low) -> IRQ 11 [ 0.298467] pci 0000:00:1c.4: setting latency timer to 64 [ 0.298475] pci 0000:00:1e.0: setting latency timer to 64 [ 0.298479] pci_bus 0000:00: resource 0 io: [0x00-0xffff] [ 0.298481] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff] [ 0.298483] pci_bus 0000:01: resource 0 io: [0xd000-0xdfff] [ 0.298485] pci_bus 0000:01: resource 1 mem: [0xf2000000-0xf6efffff] [ 0.298487] pci_bus 0000:01: resource 2 pref mem [0xe0000000-0xefffffff] [ 0.298489] pci_bus 0000:09: resource 0 io: [0xc000-0xcfff] [ 0.298491] pci_bus 0000:09: resource 1 mem: [0xf1f00000-0xf1ffffff] [ 0.298493] pci_bus 0000:0b: resource 1 mem: [0xf1e00000-0xf1efffff] [ 0.298495] pci_bus 0000:0c: resource 0 io: [0xb000-0xbfff] [ 0.298497] pci_bus 0000:0c: resource 1 mem: [0xf1c00000-0xf1dfffff] [ 0.298499] pci_bus 0000:0c: resource 2 pref mem [0xf0000000-0xf01fffff] [ 0.298501] pci_bus 0000:03: resource 1 mem: [0xf1b00000-0xf1bfffff] [ 0.298503] pci_bus 0000:03: resource 3 io: [0x00-0xffff] [ 0.298505] pci_bus 0000:03: resource 4 mem: [0x000000-0xffffffff] [ 0.298528] NET: Registered protocol family 2 [ 0.298597] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.298827] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.299115] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 0.299263] TCP: Hash tables configured (established 131072 bind 65536) [ 0.299265] TCP reno registered [ 0.299313] NET: Registered protocol family 1 [ 0.299351] Trying to unpack rootfs image as initramfs... [ 0.461935] Freeing initrd memory: 8042k freed [ 0.465881] Simple Boot Flag at 0x79 set to 0x1 [ 0.466034] cpufreq-nforce2: No nForce2 chipset. [ 0.466053] Scanning for low memory corruption every 60 seconds [ 0.466142] audit: initializing netlink socket (disabled) [ 0.466158] type=2000 audit(1259507413.463:1): initialized [ 0.473100] highmem bounce pool size: 64 pages [ 0.473104] HugeTLB registered 4 MB page size, pre-allocated 0 pages [ 0.474278] VFS: Disk quotas dquot_6.5.2 [ 0.474325] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.474761] fuse init (API version 7.12) [ 0.474824] msgmni has been set to 1679 [ 0.475004] alg: No test for stdrng (krng) [ 0.475015] io scheduler noop registered [ 0.475017] io scheduler anticipatory registered [ 0.475019] io scheduler deadline registered [ 0.475051] io scheduler cfq registered (default) [ 0.475206] pci 0000:01:00.0: Boot video device [ 0.475311] alloc irq_desc for 16 on node -1 [ 0.475312] alloc kstat_irqs on node -1 [ 0.475321] pcieport-driver 0000:00:01.0: irq 16 for MSI/MSI-X [ 0.475327] pcieport-driver 0000:00:01.0: setting latency timer to 64 [ 0.475451] alloc irq_desc for 17 on node -1 [ 0.475452] alloc kstat_irqs on node -1 [ 0.475460] pcieport-driver 0000:00:1c.0: irq 17 for MSI/MSI-X [ 0.475471] pcieport-driver 0000:00:1c.0: setting latency timer to 64 [ 0.475619] alloc irq_desc for 18 on node -1 [ 0.475621] alloc kstat_irqs on node -1 [ 0.475629] pcieport-driver 0000:00:1c.1: irq 18 for MSI/MSI-X [ 0.475640] pcieport-driver 0000:00:1c.1: setting latency timer to 64 [ 0.475787] alloc irq_desc for 19 on node -1 [ 0.475788] alloc kstat_irqs on node -1 [ 0.475796] pcieport-driver 0000:00:1c.4: irq 19 for MSI/MSI-X [ 0.475807] pcieport-driver 0000:00:1c.4: setting latency timer to 64 [ 0.475902] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.476004] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 0.476140] ACPI: AC Adapter [AC] (on-line) [ 0.476199] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input0 [ 0.627458] ACPI: Lid Switch [LID] [ 0.627494] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1 [ 0.627500] ACPI: Power Button [PBTN] [ 0.627535] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2 [ 0.627537] ACPI: Sleep Button [SBTN] [ 0.628062] ACPI: SSDT bfe72cb4 002C8 (v01 PmRef Cpu0Ist 00003000 INTL 20050624) [ 0.628452] ACPI: SSDT bfe7264a 005E5 (v01 PmRef Cpu0Cst 00003001 INTL 20050624) [ 0.628693] Monitor-Mwait will be used to enter C-1 state [ 0.628713] Monitor-Mwait will be used to enter C-2 state [ 0.628731] Monitor-Mwait will be used to enter C-3 state [ 0.628737] Marking TSC unstable due to TSC halts in idle [ 0.628774] Switched to high resolution mode on CPU 0 [ 0.628784] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3]) [ 0.628804] processor LNXCPU:00: registered as cooling_device0 [ 0.628807] ACPI: Processor [CPU0] (supports 8 throttling states) [ 0.629080] ACPI: SSDT bfe72f7c 000C4 (v01 PmRef Cpu1Ist 00003000 INTL 20050624) [ 0.629307] ACPI: SSDT bfe72c2f 00085 (v01 PmRef Cpu1Cst 00003000 INTL 20050624) [ 0.629670] ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3]) [ 0.629690] processor LNXCPU:01: registered as cooling_device1 [ 0.629693] ACPI: Processor [CPU1] (supports 8 throttling states) [ 0.629793] Switched to high resolution mode on CPU 1 [ 0.631413] thermal LNXTHERM:01: registered as thermal_zone0 [ 0.631421] ACPI: Thermal Zone [THM] (56 C) [ 0.631469] isapnp: Scanning for PnP cards... [ 0.663463] ACPI: Battery Slot [BAT0] (battery present) [ 0.988044] isapnp: No Plug & Play device found [ 0.988919] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.990015] brd: module loaded [ 0.990372] loop: module loaded [ 0.990426] input: Macintosh mouse button emulation as /devices/virtual/input/input3 [ 0.990510] ata_piix 0000:00:1f.1: version 2.13 [ 0.990646] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 10 [ 0.990648] PCI: setting IRQ 10 as level-triggered [ 0.990654] ata_piix 0000:00:1f.1: PCI INT A -> Link[LNKC] -> GSI 10 (level, low) -> IRQ 10 [ 0.990692] ata_piix 0000:00:1f.1: setting latency timer to 64 [ 0.990754] scsi0 : ata_piix [ 0.990816] scsi1 : ata_piix [ 0.991261] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x6fa0 irq 14 [ 0.991263] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x6fa8 irq 15 [ 0.991285] ata_piix 0000:00:1f.2: PCI INT B -> Link[LNKB] -> GSI 7 (level, low) -> IRQ 7 [ 0.991292] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ] [ 0.991451] ata2: port disabled. ignoring. [ 1.144053] ata_piix 0000:00:1f.2: setting latency timer to 64 [ 1.144269] scsi2 : ata_piix [ 1.144318] scsi3 : ata_piix [ 1.144756] ata3: SATA max UDMA/133 cmd 0x6eb0 ctl 0x6eb8 bmdma 0x6ee0 irq 7 [ 1.144763] ata4: SATA max UDMA/133 cmd 0x6ec0 ctl 0x6ec8 bmdma 0x6ee8 irq 7 [ 1.145472] Fixed MDIO Bus: probed [ 1.145505] PPP generic driver version 2.4.2 [ 1.145570] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.145706] ACPI: PCI Interrupt Link [LNKG] enabled at IRQ 9 [ 1.145708] PCI: setting IRQ 9 as level-triggered [ 1.145712] ehci_hcd 0000:00:1a.7: PCI INT C -> Link[LNKG] -> GSI 9 (level, low) -> IRQ 9 [ 1.145720] ehci_hcd 0000:00:1a.7: setting latency timer to 64 [ 1.145723] ehci_hcd 0000:00:1a.7: EHCI Host Controller [ 1.145758] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1 [ 1.149660] ehci_hcd 0000:00:1a.7: debug port 1 [ 1.149666] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported [ 1.149671] ehci_hcd 0000:00:1a.7: irq 9, io mem 0xfed1c400 [ 1.156496] ata1.00: ATAPI: TEAC DVD+/-RW DVW28SLC, A.06, max UDMA/33 [ 1.165011] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00 [ 1.165068] usb usb1: configuration #1 chosen from 1 choice [ 1.165093] hub 1-0:1.0: USB hub found [ 1.165101] hub 1-0:1.0: 4 ports detected [ 1.165268] ACPI: PCI Interrupt Link [LNKE] enabled at IRQ 11 [ 1.165271] ehci_hcd 0000:00:1d.7: PCI INT A -> Link[LNKE] -> GSI 11 (level, low) -> IRQ 11 [ 1.165279] ehci_hcd 0000:00:1d.7: setting latency timer to 64 [ 1.165283] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 1.165306] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2 [ 1.169222] ehci_hcd 0000:00:1d.7: debug port 1 [ 1.169228] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported [ 1.169234] ehci_hcd 0000:00:1d.7: irq 11, io mem 0xfed1c000 [ 1.176310] ata1.00: configured for UDMA/33 [ 1.185013] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 1.185058] usb usb2: configuration #1 chosen from 1 choice [ 1.185081] hub 2-0:1.0: USB hub found [ 1.185087] hub 2-0:1.0: 6 ports detected [ 1.185138] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.185150] uhci_hcd: USB Universal Host Controller Interface driver [ 1.185166] uhci_hcd 0000:00:1a.0: PCI INT A -> Link[LNKE] -> GSI 11 (level, low) -> IRQ 11 [ 1.185172] uhci_hcd 0000:00:1a.0: setting latency timer to 64 [ 1.185175] uhci_hcd 0000:00:1a.0: UHCI Host Controller [ 1.185204] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3 [ 1.185230] uhci_hcd 0000:00:1a.0: irq 11, io base 0x00006f20 [ 1.185298] usb usb3: configuration #1 chosen from 1 choice [ 1.185318] hub 3-0:1.0: USB hub found [ 1.185323] hub 3-0:1.0: 2 ports detected [ 1.185482] ACPI: PCI Interrupt Link [LNKF] enabled at IRQ 10 [ 1.185485] uhci_hcd 0000:00:1a.1: PCI INT B -> Link[LNKF] -> GSI 10 (level, low) -> IRQ 10 [ 1.185490] uhci_hcd 0000:00:1a.1: setting latency timer to 64 [ 1.185493] uhci_hcd 0000:00:1a.1: UHCI Host Controller [ 1.185517] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4 [ 1.185564] uhci_hcd 0000:00:1a.1: irq 10, io base 0x00006f00 [ 1.185635] usb usb4: configuration #1 chosen from 1 choice [ 1.185655] hub 4-0:1.0: USB hub found [ 1.185661] hub 4-0:1.0: 2 ports detected [ 1.185703] uhci_hcd 0000:00:1d.0: PCI INT A -> Link[LNKE] -> GSI 11 (level, low) -> IRQ 11 [ 1.185710] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [ 1.185714] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 1.185736] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5 [ 1.185761] uhci_hcd 0000:00:1d.0: irq 11, io base 0x00006f80 [ 1.185829] usb usb5: configuration #1 chosen from 1 choice [ 1.185848] hub 5-0:1.0: USB hub found [ 1.185854] hub 5-0:1.0: 2 ports detected [ 1.185893] uhci_hcd 0000:00:1d.1: PCI INT B -> Link[LNKF] -> GSI 10 (level, low) -> IRQ 10 [ 1.185899] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [ 1.185902] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 1.185927] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6 [ 1.185953] uhci_hcd 0000:00:1d.1: irq 10, io base 0x00006f60 [ 1.186017] usb usb6: configuration #1 chosen from 1 choice [ 1.186037] hub 6-0:1.0: USB hub found [ 1.186043] hub 6-0:1.0: 2 ports detected [ 1.186084] uhci_hcd 0000:00:1d.2: PCI INT C -> Link[LNKG] -> GSI 9 (level, low) -> IRQ 9 [ 1.186090] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [ 1.186094] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 1.186118] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7 [ 1.186144] uhci_hcd 0000:00:1d.2: irq 9, io base 0x00006f40 [ 1.186215] usb usb7: configuration #1 chosen from 1 choice [ 1.186236] hub 7-0:1.0: USB hub found [ 1.186241] hub 7-0:1.0: 2 ports detected [ 1.186327] PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 1.199791] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.199795] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 1.199841] mice: PS/2 mouse device common for all mice [ 1.199926] rtc_cmos 00:04: RTC can wake from S4 [ 1.199949] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0 [ 1.199973] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs [ 1.200062] device-mapper: uevent: version 1.0.3 [ 1.200092] scsi 0:0:0:0: CD-ROM TEAC DVD+-RW DVW28SLC A.06 PQ: 0 ANSI: 5 [ 1.200751] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com [ 1.200835] device-mapper: multipath: version 1.1.0 loaded [ 1.200837] device-mapper: multipath round-robin: version 1.0.0 loaded [ 1.200933] EISA: Probing bus 0 at eisa.0 [ 1.200940] Cannot allocate resource for EISA slot 1 [ 1.200968] EISA: Detected 0 cards. [ 1.201120] cpuidle: using governor ladder [ 1.201213] cpuidle: using governor menu [ 1.201585] TCP cubic registered [ 1.201707] NET: Registered protocol family 10 [ 1.202091] lo: Disabled Privacy Extensions [ 1.202351] NET: Registered protocol family 17 [ 1.202364] Bluetooth: L2CAP ver 2.13 [ 1.202366] Bluetooth: L2CAP socket layer initialized [ 1.202368] Bluetooth: SCO (Voice Link) ver 0.6 [ 1.202369] Bluetooth: SCO socket layer initialized [ 1.202476] Bluetooth: RFCOMM TTY layer initialized [ 1.202478] Bluetooth: RFCOMM socket layer initialized [ 1.202480] Bluetooth: RFCOMM ver 1.11 [ 1.202931] Using IPI No-Shortcut mode [ 1.202976] PM: Resume from disk failed. [ 1.202985] registered taskstats version 1 [ 1.203079] Magic number: 1:418:185 [ 1.203098] thermal LNXTHERM:01: hash matches [ 1.203170] rtc_cmos 00:04: setting system clock to 2009-11-29 15:10:14 UTC (1259507414) [ 1.203172] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 1.203174] EDD information not available. [ 1.227809] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4 [ 1.228529] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda caddy [ 1.228531] Uniform CD-ROM driver Revision: 3.20 [ 1.228587] sr 0:0:0:0: Attached scsi CD-ROM sr0 [ 1.228620] sr 0:0:0:0: Attached scsi generic sg0 type 5 [ 1.477088] usb 1-1: new high speed USB device using ehci_hcd and address 2 [ 1.500054] Clocksource tsc unstable (delta = -254894392 ns) [ 1.613359] usb 1-1: configuration #1 chosen from 1 choice [ 1.788139] ata4.00: SATA link down (SStatus 0 SControl 300) [ 1.788165] ata4.01: SATA link down (SStatus 0 SControl 0) [ 1.948177] ata3.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1.948199] ata3.01: SATA link down (SStatus 0 SControl 300) [ 1.986252] ata3.00: ATA-8: ST9200423ASG, DE14, max UDMA/133 [ 1.986257] ata3.00: 390721968 sectors, multi 8: LBA48 NCQ (depth 0/32) [ 2.046270] ata3.00: configured for UDMA/133 [ 2.046381] scsi 2:0:0:0: Direct-Access ATA ST9200423ASG DE14 PQ: 0 ANSI: 5 [ 2.046454] sd 2:0:0:0: Attached scsi generic sg1 type 0 [ 2.046480] sd 2:0:0:0: [sda] 390721968 512-byte logical blocks: (200 GB/186 GiB) [ 2.046514] sd 2:0:0:0: [sda] Write Protect is off [ 2.046516] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 2.046534] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.046617] sda: sda1 sda2 sda3 < > sda4 [ 2.087326] sd 2:0:0:0: [sda] Attached SCSI disk [ 2.087356] Freeing unused kernel memory: 540k freed [ 2.087688] Write protecting the kernel text: 4568k [ 2.087740] Write protecting the kernel read-only data: 1836k [ 2.132024] usb 3-2: new full speed USB device using uhci_hcd and address 2 [ 2.173814] Linux agpgart interface v0.103 [ 2.179852] sky2 driver version 1.23 [ 2.179894] sky2 0000:09:00.0: PCI INT A -> Link[LNKA] -> GSI 11 (level, low) -> IRQ 11 [ 2.179909] sky2 0000:09:00.0: setting latency timer to 64 [ 2.179938] sky2 0000:09:00.0: Yukon-2 FE+ chip revision 0 [ 2.180054] alloc irq_desc for 20 on node -1 [ 2.180057] alloc kstat_irqs on node -1 [ 2.180075] sky2 0000:09:00.0: irq 20 for MSI/MSI-X [ 2.180646] sky2 eth0: addr 00:1d:09:44:b8:e5 [ 2.251706] acpi device:32: registered as cooling_device2 [ 2.252362] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A03:00/device:2e/device:2f/input/input5 [ 2.252395] ACPI: Video Device [VID] (multi-head: yes rom: no post: no) [ 2.259136] ohci1394 0000:03:09.0: PCI INT A -> Link[LNKA] -> GSI 11 (level, low) -> IRQ 11 [ 2.308398] usb 3-2: configuration #1 chosen from 1 choice [ 2.319594] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[11] MMIO=[f1bff800-f1bfffff] Max Packet=[2048] IR/IT contexts=[4/4] [ 2.556061] usb 7-2: new full speed USB device using uhci_hcd and address 2 [ 2.748307] usb 7-2: configuration #1 chosen from 1 choice [ 2.750281] hub 7-2:1.0: USB hub found [ 2.751257] hub 7-2:1.0: 3 ports detected [ 3.089254] usb 7-2.1: new full speed USB device using uhci_hcd and address 3 [ 3.269266] usb 7-2.1: configuration #1 chosen from 1 choice [ 3.346244] usb 7-2.2: new full speed USB device using uhci_hcd and address 4 [ 3.428970] xor: automatically using best checksumming function: pIII_sse [ 3.445033] pIII_sse : 9938.000 MB/sec [ 3.445035] xor: using function: pIII_sse (9938.000 MB/sec) [ 3.446737] device-mapper: dm-raid45: initialized v0.2594b [ 3.491325] usb 7-2.2: configuration #1 chosen from 1 choice [ 3.497094] usbcore: registered new interface driver hiddev [ 3.500421] input: Broadcom Corp as /devices/pci0000:00/0000:00:1d.2/usb7/7-2/7-2.2/7-2.2:1.0/input/input6 [ 3.500460] generic-usb 0003:0A5C:4502.0001: input,hidraw0: USB HID v1.11 Keyboard [Broadcom Corp] on usb-0000:00:1d.2-2.2/input0 [ 3.500469] usbcore: registered new interface driver usbhid [ 3.500471] usbhid: v2.6:USB HID core driver [ 3.573594] usb 7-2.3: new full speed USB device using uhci_hcd and address 5 [ 3.596102] ieee1394: Host added: ID:BUS[0-00:1023] GUID[374fc0001caa0558] [ 3.642206] PM: Starting manual resume from disk [ 3.642209] PM: Resume from partition 8:4 [ 3.642210] PM: Checking hibernation image. [ 3.642603] PM: Resume from disk failed. [ 3.665915] EXT4-fs (sda2): barriers enabled [ 3.676928] kjournald2 starting: pid 440, dev sda2:8, commit interval 5 seconds [ 3.676959] EXT4-fs (sda2): delayed allocation enabled [ 3.676964] EXT4-fs: file extents enabled [ 3.679214] EXT4-fs: mballoc enabled [ 3.679224] EXT4-fs (sda2): mounted filesystem with ordered data mode [ 3.727338] usb 7-2.3: configuration #1 chosen from 1 choice [ 3.733643] input: Broadcom Corp as /devices/pci0000:00/0000:00:1d.2/usb7/7-2/7-2.3/7-2.3:1.0/input/input7 [ 3.733702] generic-usb 0003:0A5C:4503.0002: input,hidraw1: USB HID v1.11 Mouse [Broadcom Corp] on usb-0000:00:1d.2-2.3/input0 [ 4.228346] type=1505 audit(1259507417.524:2): operation="profile_load" pid=471 name=/usr/share/gdm/guest-session/Xsession [ 4.239236] type=1505 audit(1259507417.532:3): operation="profile_load" pid=472 name=/sbin/dhclient3 [ 4.239790] type=1505 audit(1259507417.532:4): operation="profile_load" pid=472 name=/usr/lib/NetworkManager/nm-dhcp-client.action [ 4.240111] type=1505 audit(1259507417.536:5): operation="profile_load" pid=472 name=/usr/lib/connman/scripts/dhclient-script [ 4.284978] type=1505 audit(1259507417.580:6): operation="profile_load" pid=473 name=/usr/bin/evince [ 4.293317] type=1505 audit(1259507417.588:7): operation="profile_load" pid=473 name=/usr/bin/evince-previewer [ 4.298243] type=1505 audit(1259507417.592:8): operation="profile_load" pid=473 name=/usr/bin/evince-thumbnailer [ 4.317016] type=1505 audit(1259507417.612:9): operation="profile_load" pid=475 name=/usr/lib/cups/backend/cups-pdf [ 4.317666] type=1505 audit(1259507417.612:10): operation="profile_load" pid=475 name=/usr/sbin/cupsd [ 5.161784] udev: starting version 147 [ 5.318097] Adding 2000084k swap on /dev/sda4. Priority:-1 extents:1 across:2000084k [ 5.463979] EXT4-fs (sda2): internal journal on sda2:8 [ 7.705405] nvidia: module license 'NVIDIA' taints kernel. [ 7.705409] Disabling lock debugging due to kernel taint [ 7.814853] lp: driver loaded but no devices found [ 7.886102] Linux video capture interface: v2.00 [ 7.887310] Bluetooth: Generic Bluetooth USB driver ver 0.5 [ 7.887404] usbcore: registered new interface driver btusb [ 7.942853] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2) [ 7.970941] nvidia 0000:01:00.0: PCI INT A -> Link[LNKA] -> GSI 11 (level, low) -> IRQ 11 [ 7.970950] nvidia 0000:01:00.0: setting latency timer to 64 [ 7.971075] NVRM: loading NVIDIA UNIX x86 Kernel Module 185.18.36 Fri Aug 14 17:18:04 PDT 2009 [ 7.984720] input: Dell WMI hotkeys as /devices/virtual/input/input8 [ 8.025118] cfg80211: Calling CRDA to update world regulatory domain [ 8.377162] input: PS/2 Mouse as /devices/platform/i8042/serio1/input/input9 [ 8.403137] input: AlpsPS/2 ALPS GlidePoint as /devices/platform/i8042/serio1/input/input10 [ 8.500937] ip_tables: (C) 2000-2006 Netfilter Core Team [ 8.605261] cfg80211: World regulatory domain updated: [ 8.605265] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 8.605270] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 8.605274] (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 8.605278] (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 8.605283] (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 8.605287] (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 8.990193] uvcvideo: Found UVC 1.00 device Laptop Integrated Webcam (05a9:2640) [ 8.990661] uvcvideo: UVC non compliance - GET_DEF(PROBE) not supported. Enabling workaround. [ 8.991418] input: Laptop Integrated Webcam as /devices/pci0000:00/0000:00:1a.7/usb1/1-1/1-1:1.0/input/input11 [ 8.991464] usbcore: registered new interface driver uvcvideo [ 8.991466] USB Video Class driver (v0.1.0) [ 9.098737] sdhci: Secure Digital Host Controller Interface driver [ 9.098739] sdhci: Copyright(c) Pierre Ossman [ 9.206200] sdhci-pci 0000:03:09.1: SDHCI controller found [1180:0822] (rev 22) [ 9.206219] sdhci-pci 0000:03:09.1: PCI INT B -> Link[LNKC] -> GSI 10 (level, low) -> IRQ 10 [ 9.208260] Registered led device: mmc0:: [ 9.209298] mmc0: SDHCI controller on PCI [0000:03:09.1] using DMA [ 9.282648] iwl3945: Intel(R) PRO/Wireless 3945ABG/BG Network Connection driver for Linux, 1.2.26ks [ 9.282650] iwl3945: Copyright(c) 2003-2009 Intel Corporation [ 9.282751] iwl3945 0000:0b:00.0: PCI INT A -> Link[LNKB] -> GSI 7 (level, low) -> IRQ 7 [ 9.282765] iwl3945 0000:0b:00.0: setting latency timer to 64 [ 9.354508] iwl3945 0000:0b:00.0: Tunable channels: 11 802.11bg, 13 802.11a channels [ 9.354511] iwl3945 0000:0b:00.0: Detected Intel Wireless WiFi Link 3945ABG [ 9.354624] alloc irq_desc for 21 on node -1 [ 9.354626] alloc kstat_irqs on node -1 [ 9.354658] iwl3945 0000:0b:00.0: irq 21 for MSI/MSI-X [ 9.542924] phy0: Selected rate control algorithm 'iwl-3945-rs' [ 9.929402] HDA Intel 0000:00:1b.0: PCI INT A -> Link[LNKF] -> GSI 10 (level, low) -> IRQ 10 [ 9.929425] HDA Intel 0000:00:1b.0: setting latency timer to 64 [ 10.183143] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input12 [ 10.278336] __ratelimit: 6 callbacks suppressed [ 10.278339] type=1505 audit(1259487623.572:13): operation="profile_replace" pid=990 name=/usr/share/gdm/guest-session/Xsession [ 10.279586] type=1505 audit(1259487623.572:14): operation="profile_replace" pid=991 name=/sbin/dhclient3 [ 10.280152] type=1505 audit(1259487623.576:15): operation="profile_replace" pid=991 name=/usr/lib/NetworkManager/nm-dhcp-client.action [ 10.280447] type=1505 audit(1259487623.576:16): operation="profile_replace" pid=991 name=/usr/lib/connman/scripts/dhclient-script [ 10.283252] type=1505 audit(1259487623.576:17): operation="profile_replace" pid=992 name=/usr/bin/evince [ 10.292018] type=1505 audit(1259487623.588:18): operation="profile_replace" pid=992 name=/usr/bin/evince-previewer [ 10.297064] type=1505 audit(1259487623.592:19): operation="profile_replace" pid=992 name=/usr/bin/evince-thumbnailer [ 10.304072] type=1505 audit(1259487623.600:20): operation="profile_replace" pid=997 name=/usr/lib/cups/backend/cups-pdf [ 10.304736] type=1505 audit(1259487623.600:21): operation="profile_replace" pid=997 name=/usr/sbin/cupsd [ 10.306530] type=1505 audit(1259487623.600:22): operation="profile_replace" pid=998 name=/usr/sbin/ntpd [ 10.384375] input: HDA Intel Mic at Ext Front Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13 [ 10.384444] input: HDA Intel HP Out at Ext Front Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14 [ 10.384490] input: HDA Intel HP Out at Ext Front Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input15