[ 401.516526] usb 1-8.3: reset full speed USB device using ehci_hcd and address 11 [ 401.688288] usb 1-8.3: reset full speed USB device using ehci_hcd and address 11 [ 401.860346] usb 1-8.3: reset full speed USB device using ehci_hcd and address 11 [ 402.068773] usb 1-8.3: reset full speed USB device using ehci_hcd and address 11 [ 402.252320] usb 1-8.3: reset full speed USB device using ehci_hcd and address 11 [ 402.424545] usb 1-8.3: reset full speed USB device using ehci_hcd and address 11 [ 402.608322] usb 1-8.3: reset full speed USB device using ehci_hcd and address 11 [ 402.780446] usb 1-8.3: reset full speed USB device using ehci_hcd and address 11 [ 408.727730] agpgart-intel 0000:00:00.0: AGP 3.0 bridge [ 408.727753] agpgart-intel 0000:00:00.0: putting AGP V3 device into 8x mode [ 408.727806] nvidia 0000:01:00.0: putting AGP V3 device into 8x mode [ 409.536042] eth0: no IPv6 routers present [ 411.391226] usb 1-8.1.1: USB disconnect, address 49 [ 411.472299] usb 1-8.1: reset full speed USB device using ehci_hcd and address 8 [ 411.844292] usb 1-8.1.1: new full speed USB device using ehci_hcd and address 50 [ 411.937754] usb 1-8.1.1: configuration #1 chosen from 1 choice [ 411.938141] input: Microsoft X-Box pad v2 (US) as /devices/pci0000:00/0000:00:1d.7/usb1/1-8/1-8.1/1-8.1.1/1-8.1.1:1.0/input/input7 [ 416.112032] usb 1-2: reset high speed USB device using ehci_hcd and address 3 [ 417.233238] usb 1-8.3: reset full speed USB device using ehci_hcd and address 11 [ 417.404287] usb 1-8.3: reset full speed USB device using ehci_hcd and address 11 [ 417.584358] usb 1-8.3: reset full speed USB device using ehci_hcd and address 11 [ 417.760406] usb 1-8.3: reset full speed USB device using ehci_hcd and address 11 [ 417.968377] usb 1-8.3: reset full speed USB device using ehci_hcd and address 11 [ 418.156384] usb 1-8.3: reset full speed USB device using ehci_hcd and address 11 [ 418.368802] usb 1-8.3: reset full speed USB device using ehci_hcd and address 11 [ 418.588334] usb 1-8.3: reset full speed USB device using ehci_hcd and address 11 [ 418.828372] usb 1-8.3: reset full speed USB device using ehci_hcd and address 11 [ 419.000436] usb 1-8.3: reset full speed USB device using ehci_hcd and address 11 [ 419.176435] usb 1-8.3: reset full speed USB device using ehci_hcd and address 11 [ 419.392282] usb 1-8.3: reset full speed USB device using ehci_hcd and address 11 [ 419.608318] usb 1-8.3: reset full speed USB device using ehci_hcd and address 11 [ 419.857231] usb 1-8.3: reset full speed USB device using ehci_hcd and address 11 [ 420.052284] usb 1-8.3: reset full speed USB device using ehci_hcd and address 11 [ 420.240536] usb 1-8.3: reset full speed USB device using ehci_hcd and address 11 [ 420.440886] usb 1-8.3: reset full speed USB device using ehci_hcd and address 11 [ 420.612315] usb 1-8.3: reset full speed USB device using ehci_hcd and address 11 [ 420.804367] usb 1-8.3: reset full speed USB device using ehci_hcd and address 11 [ 420.980975] usb 1-8.3: reset full speed USB device using ehci_hcd and address 11 [ 421.152373] usb 1-8.3: reset full speed USB device using ehci_hcd and address 11 [ 421.332302] usb 1-8.3: reset full speed USB device using ehci_hcd and address 11 [ 421.520367] usb 1-8.3: reset full speed USB device using ehci_hcd and address 11 [ 421.751487] usb 1-8.3: reset full speed USB device using ehci_hcd and address 11 [ 421.960572] usb 1-8.3: reset full speed USB device using ehci_hcd and address 11 [ 422.136363] usb 1-8.3: reset full speed USB device using ehci_hcd and address 11 [ 422.352432] usb 1-8.3: reset full speed USB device using ehci_hcd and address 11 [ 422.534743] usb 1-8.3: reset full speed USB device using ehci_hcd and address 11 [ 422.708952] usb 1-8.3: reset full speed USB device using ehci_hcd and address 11 [ 422.908324] usb 1-8.3: reset full speed USB device using ehci_hcd and address 11 [ 423.092750] usb 1-8.3: reset full speed USB device using ehci_hcd and address 11 [ 423.292294] usb 1-8.3: reset full speed USB device using ehci_hcd and address 11 [ 423.468347] usb 1-8.3: reset full speed USB device using ehci_hcd and address 11 [ 423.640279] usb 1-8.3: reset full speed USB device using ehci_hcd and address 11 [ 423.812629] usb 1-8.3: reset full speed USB device using ehci_hcd and address 11 [ 423.984279] usb 1-8.3: reset full speed USB device using ehci_hcd and address 11 [ 424.156338] usb 1-8.3: reset full speed USB device using ehci_hcd and address 11 [ 424.332269] usb 1-8.3: reset full speed USB device using ehci_hcd and address 11 [ 424.508327] usb 1-8.3: reset full speed USB device using ehci_hcd and address 11 [ 424.704390] usb 1-8.3: reset full speed USB device using ehci_hcd and address 11 [ 424.900312] usb 1-8.3: reset full speed USB device using ehci_hcd and address 11 [ 425.091100] usb 1-8.3: reset full speed USB device using ehci_hcd and address 11 [ 425.273405] usb 1-8.3: reset full speed USB device using ehci_hcd and address 11 [ 426.106612] usb 1-8.1.1: USB disconnect, address 50 [ 426.192442] usb 1-8.1: reset full speed USB device using ehci_hcd and address 8 [ 426.408029] usb 1-2: reset high speed USB device using ehci_hcd and address 3 [ 426.648759] usb 1-8.1.1: new full speed USB device using ehci_hcd and address 51 [ 426.742393] usb 1-8.1.1: configuration #1 chosen from 1 choice [ 426.742811] input: Microsoft X-Box pad v2 (US) as /devices/pci0000:00/0000:00:1d.7/usb1/1-8/1-8.1/1-8.1.1/1-8.1.1:1.0/input/input8 [ 430.384541] usb 1-8.3: device firmware changed [ 430.392051] usb 1-8.3: USB disconnect, address 11 [ 430.480919] CPU0 attaching NULL sched-domain. [ 430.480929] CPU1 attaching NULL sched-domain. [ 430.500096] CPU0 attaching sched-domain: [ 430.500103] domain 0: span 0-1 level SIBLING [ 430.500109] groups: 0 1 [ 430.500121] CPU1 attaching sched-domain: [ 430.500126] domain 0: span 0-1 level SIBLING [ 430.500131] groups: 1 0 [ 432.625490] sd 4:0:0:0: [sdc] Unhandled error code [ 432.625498] sd 4:0:0:0: [sdc] Result: hostbyte=DID_ABORT driverbyte=DRIVER_OK [ 432.625506] end_request: I/O error, dev sdc, sector 0 [ 432.625515] __ratelimit: 6 callbacks suppressed [ 432.625521] Buffer I/O error on device sdc, logical block 0 [ 432.768033] usb 1-2: reset high speed USB device using ehci_hcd and address 3 [ 452.663153] synergys[2028]: segfault at 8 ip 004ed867 sp bffe2ad0 error 4 in libbluetooth.so.3.2.4[4df000+15000] [ 463.116051] usb 1-2: reset high speed USB device using ehci_hcd and address 3 [ 473.356028] usb 1-2: reset high speed USB device using ehci_hcd and address 3 [ 479.620465] usb 1-2: reset high speed USB device using ehci_hcd and address 3 [ 510.112033] usb 1-2: reset high speed USB device using ehci_hcd and address 3 [ 520.360031] usb 1-2: reset high speed USB device using ehci_hcd and address 3 [ 526.644023] usb 1-2: reset high speed USB device using ehci_hcd and address 3 [ 557.112023] usb 1-2: reset high speed USB device using ehci_hcd and address 3 [ 567.356029] usb 1-2: reset high speed USB device using ehci_hcd and address 3 [ 573.488605] sd 4:0:0:0: [sdc] Unhandled error code [ 573.488611] sd 4:0:0:0: [sdc] Result: hostbyte=DID_ABORT driverbyte=DRIVER_OK [ 573.488617] end_request: I/O error, dev sdc, sector 0 [ 573.488624] Buffer I/O error on device sdc, logical block 0 [ 573.624882] usb 1-2: reset high speed USB device using ehci_hcd and address 3 [ 604.112042] usb 1-2: reset high speed USB device using ehci_hcd and address 3 [ 614.360032] usb 1-2: reset high speed USB device using ehci_hcd and address 3 [ 620.628041] usb 1-2: reset high speed USB device using ehci_hcd and address 3 [ 651.112022] usb 1-2: reset high speed USB device using ehci_hcd and address 3 [ 661.364037] usb 1-2: reset high speed USB device using ehci_hcd and address 3 [ 667.642913] usb 1-2: reset high speed USB device using ehci_hcd and address 3 [ 698.112022] usb 1-2: reset high speed USB device using ehci_hcd and address 3 [ 708.356031] usb 1-2: reset high speed USB device using ehci_hcd and address 3 [ 714.488670] sd 4:0:0:0: [sdc] Unhandled error code [ 714.488676] sd 4:0:0:0: [sdc] Result: hostbyte=DID_ABORT driverbyte=DRIVER_OK [ 714.488683] end_request: I/O error, dev sdc, sector 0 [ 714.488690] Buffer I/O error on device sdc, logical block 0 [ 714.488718] ldm_validate_partition_table(): Disk read failed. [ 714.628080] usb 1-2: reset high speed USB device using ehci_hcd and address 3 [ 745.116039] usb 1-2: reset high speed USB device using ehci_hcd and address 3 [ 755.360026] usb 1-2: reset high speed USB device using ehci_hcd and address 3 [ 761.620758] usb 1-2: reset high speed USB device using ehci_hcd and address 3 [ 792.112035] usb 1-2: reset high speed USB device using ehci_hcd and address 3 [ 802.356039] usb 1-2: reset high speed USB device using ehci_hcd and address 3 [ 808.632075] usb 1-2: reset high speed USB device using ehci_hcd and address 3 [ 839.112041] usb 1-2: reset high speed USB device using ehci_hcd and address 3 [ 842.340260] sd 4:0:0:0: Device offlined - not ready after error recovery [ 842.340274] sd 4:0:0:0: [sdc] Unhandled error code [ 842.340278] sd 4:0:0:0: [sdc] Result: hostbyte=DID_ABORT driverbyte=DRIVER_OK [ 842.340284] end_request: I/O error, dev sdc, sector 0 [ 842.340291] Buffer I/O error on device sdc, logical block 0 [ 842.340335] sd 4:0:0:0: rejecting I/O to offline device [ 842.340352] sd 4:0:0:0: rejecting I/O to offline device [ 842.340367] sd 4:0:0:0: rejecting I/O to offline device [ 842.340377] Dev sdc: unable to read RDB block 0 [ 842.340386] sd 4:0:0:0: rejecting I/O to offline device [ 842.340400] sd 4:0:0:0: rejecting I/O to offline device [ 842.340423] sd 4:0:0:0: rejecting I/O to offline device [ 842.340437] sd 4:0:0:0: rejecting I/O to offline device [ 842.340451] sd 4:0:0:0: rejecting I/O to offline device [ 842.340465] sd 4:0:0:0: rejecting I/O to offline device [ 842.340473] unable to read partition table [ 842.340639] sd 4:0:0:0: [sdc] Attached SCSI removable disk [ 842.464997] usb 1-8.3: new full speed USB device using ehci_hcd and address 52 [ 842.613897] Bridge firewalling registered [ 842.618745] usb 1-8.3: configuration #1 chosen from 1 choice [ 842.668894] scsi7 : SCSI emulation for USB Mass Storage devices [ 842.674991] usb 1-8.1.1: USB disconnect, address 51 [ 842.696231] usb-storage: device found at 52 [ 842.696237] usb-storage: waiting for device to settle before scanning [ 842.756379] usb 1-8.1: reset full speed USB device using ehci_hcd and address 8 [ 843.059888] SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled [ 843.063607] SGI XFS Quota Management subsystem [ 843.116264] ip_tables: (C) 2000-2006 Netfilter Core Team [ 843.184121] USB Serial support registered for PocketPC PDA [ 843.184281] ipaq 3-2:1.0: PocketPC PDA converter detected [ 843.187836] dell-wmi: No known WMI GUID found [ 843.201272] lp0: using parport0 (interrupt-driven). [ 843.204617] usb 1-8.1.1: new full speed USB device using ehci_hcd and address 53 [ 843.213462] usb 3-2: PocketPC PDA converter now attached to ttyUSB0 [ 843.213570] usbcore: registered new interface driver ipaq [ 843.213577] ipaq: v0.5:USB PocketPC PDA driver [ 843.308325] usb 1-8.1.1: configuration #1 chosen from 1 choice [ 843.308896] input: Microsoft X-Box pad v2 (US) as /devices/pci0000:00/0000:00:1d.7/usb1/1-8/1-8.1/1-8.1.1/1-8.1.1:1.0/input/input9 [ 843.309099] usb 1-2: USB disconnect, address 3 [ 843.313530] XFS mounting filesystem sdb1 [ 843.318935] tun: Universal TUN/TAP device driver, 1.6 [ 843.318949] tun: (C) 1999-2004 Max Krasnyansky [ 843.709717] nf_conntrack version 0.5.0 (16384 buckets, 65536 max) [ 843.710096] CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use [ 843.710101] nf_conntrack.acct=1 kernel parameter, acct=1 nf_conntrack module option or [ 843.710106] sysctl net.netfilter.nf_conntrack_acct=1 to enable it. [ 844.073483] Ending clean XFS mount for filesystem: sdb1 [ 844.281475] vboxdrv: Trying to deactivate the NMI watchdog permanently... [ 844.281482] vboxdrv: Successfully done. [ 844.281487] vboxdrv: Found 2 processor cores. [ 844.281641] vboxdrv: fAsync=0 offMin=0x448 offMax=0x13ec [ 844.281755] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'. [ 844.281760] vboxdrv: Successfully loaded version 3.0.8_OSE (interface 0x000e0000). [ 845.202318] alloc irq_desc for 17 on node -1 [ 845.202325] alloc kstat_irqs on node -1 [ 845.202340] Intel ICH 0000:00:1f.5: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 845.202422] Intel ICH 0000:00:1f.5: setting latency timer to 64 [ 845.624529] intel8x0_measure_ac97_clock: measured 55034 usecs (2652 samples) [ 845.624534] intel8x0: clocking to 48000 [ 846.063367] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 846.063374] Bluetooth: BNEP filters: protocol multicast [ 847.696264] usb-storage: device scan complete [ 847.696973] scsi 7:0:0:0: Direct-Access Generic USB SD Reader 1.00 PQ: 0 ANSI: 0 [ 847.697594] scsi 7:0:0:1: Direct-Access Generic USB CF Reader 1.01 PQ: 0 ANSI: 0 [ 847.698341] scsi 7:0:0:2: Direct-Access Generic USB SM Reader 1.02 PQ: 0 ANSI: 0 [ 847.698967] scsi 7:0:0:3: Direct-Access Generic USB MS Reader 1.03 PQ: 0 ANSI: 0 [ 847.699651] sd 7:0:0:0: Attached scsi generic sg3 type 0 [ 847.699932] sd 7:0:0:1: Attached scsi generic sg4 type 0 [ 847.700207] sd 7:0:0:2: Attached scsi generic sg5 type 0 [ 847.700431] sd 7:0:0:3: Attached scsi generic sg6 type 0 [ 848.014508] sd 7:0:0:3: [sdf] Attached SCSI removable disk [ 848.016270] sd 7:0:0:0: [sdc] 990976 512-byte logical blocks: (507 MB/483 MiB) [ 848.019513] sd 7:0:0:0: [sdc] Write Protect is off [ 848.019523] sd 7:0:0:0: [sdc] Mode Sense: 03 00 00 00 [ 848.019530] sd 7:0:0:0: [sdc] Assuming drive cache: write through [ 848.026624] sd 7:0:0:2: [sde] Attached SCSI removable disk [ 848.027260] sd 7:0:0:1: [sdd] Attached SCSI removable disk [ 848.047935] sd 7:0:0:0: [sdc] Assuming drive cache: write through [ 848.047946] sdc: sdc1 [ 848.063373] sd 7:0:0:0: [sdc] Assuming drive cache: write through [ 848.063383] sd 7:0:0:0: [sdc] Attached SCSI removable disk [ 853.416017] pan1: no IPv6 routers present