[4294667.296000] Linux version 2.6.15-23-386 (buildd@rothera) (gcc version 4.0.3 (Ubuntu 4.0.3-1ubuntu5)) #1 PREEMPT Tue May 23 13:49:40 UTC 2006
[4294667.296000] BIOS-provided physical RAM map:
[4294667.296000]  BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[4294667.296000]  BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[4294667.296000]  BIOS-e820: 00000000000d0000 - 00000000000d6000 (reserved)
[4294667.296000]  BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[4294667.296000]  BIOS-e820: 0000000000100000 - 000000001dff0000 (usable)
[4294667.296000]  BIOS-e820: 000000001dff0000 - 000000001dff8000 (ACPI data)
[4294667.296000]  BIOS-e820: 000000001dff8000 - 000000001e000000 (ACPI NVS)
[4294667.296000]  BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
[4294667.296000] 0MB HIGHMEM available.
[4294667.296000] 479MB LOWMEM available.
[4294667.296000] On node 0 totalpages: 122864
[4294667.296000]   DMA zone: 4096 pages, LIFO batch:0
[4294667.296000]   DMA32 zone: 0 pages, LIFO batch:0
[4294667.296000]   Normal zone: 118768 pages, LIFO batch:31
[4294667.296000]   HighMem zone: 0 pages, LIFO batch:0
[4294667.296000] DMI 2.3 present.
[4294667.296000] ACPI: RSDP (v000 AMI                                   ) @ 0x000fa2d0
[4294667.296000] ACPI: RSDT (v001 AMIINT VIA_K7   0x00000010 MSFT 0x00000097) @ 0x1dff0000
[4294667.296000] ACPI: FADT (v001 AMIINT VIA_K7   0x00000011 MSFT 0x00000097) @ 0x1dff0030
[4294667.296000] ACPI: DSDT (v001    VIA   VIA_K7 0x00001000 INTL 0x02002024) @ 0x00000000
[4294667.296000] ACPI: PM-Timer IO Port: 0x808
[4294667.296000] Allocating PCI resources starting at 20000000 (gap: 1e000000:e1f80000)
[4294667.296000] Built 1 zonelists
[4294667.296000] Kernel command line: root=/dev/hda1 ro quiet splash pci=routeirq
[4294667.296000] Local APIC disabled by BIOS (or by default) -- you can enable it with "lapic"
[4294667.296000] mapped APIC to ffffd000 (013c2000)
[4294667.296000] Initializing CPU#0
[4294667.296000] PID hash table entries: 2048 (order: 11, 32768 bytes)
[4294667.296000] Detected 1658.852 MHz processor.
[4294667.296000] Using pmtmr for high-res timesource
[4294667.296000] Console: colour VGA+ 80x25
[4294670.730000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[4294670.730000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[4294670.749000] Memory: 476468k/491456k available (1976k kernel code, 14388k reserved, 606k data, 288k init, 0k highmem)
[4294670.749000] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[4294670.809000] Calibrating delay using timer specific routine.. 3320.00 BogoMIPS (lpj=1660001)
[4294670.809000] Security Framework v1.0.0 initialized
[4294670.809000] SELinux:  Disabled at boot.
[4294670.809000] Mount-cache hash table entries: 512
[4294670.809000] CPU: After generic identify, caps: 0383f9ff c1cbf9ff 00000000 00000000 00000000 00000000 00000000
[4294670.809000] CPU: After vendor identify, caps: 0383f9ff c1cbf9ff 00000000 00000000 00000000 00000000 00000000
[4294670.809000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[4294670.809000] CPU: L2 Cache: 512K (64 bytes/line)
[4294670.809000] CPU: After all inits, caps: 0383f9ff c1cbf9ff 00000000 00000020 00000000 00000000 00000000
[4294670.809000] mtrr: v2.0 (20020519)
[4294670.809000] CPU: AMD mobile AMD Athlon(tm) XP-M (LV) 2200+ stepping 00
[4294670.809000] Enabling fast FPU save and restore... done.
[4294670.809000] Enabling unmasked SIMD FPU exception support... done.
[4294670.809000] Checking 'hlt' instruction... OK.
[4294670.813000] checking if image is initramfs... it is
[4294671.479000] Freeing initrd memory: 6836k freed
[4294671.497000] ACPI: Looking for DSDT ... not found!
[4294671.499000] ACPI: setting ELCR to 0200 (from 0c00)
[4294671.511000] NET: Registered protocol family 16
[4294671.511000] EISA bus registered
[4294671.511000] ACPI: bus type pci registered
[4294671.512000] PCI: PCI BIOS revision 2.10 entry at 0xfdb51, last bus=1
[4294671.512000] PCI: Using configuration type 1
[4294671.512000] ACPI: Subsystem revision 20051216
[4294671.517000] ACPI: Interpreter enabled
[4294671.517000] ACPI: Using PIC for interrupt routing
[4294671.517000] ACPI: PCI Root Bridge [PCI0] (0000:00)
[4294671.517000] PCI: Probing PCI hardware (bus 00)
[4294671.519000] PCI quirk: region 0800-087f claimed by vt8235 PM
[4294671.519000] PCI quirk: region 0400-040f claimed by vt8235 SMB
[4294671.519000] Boot video device is 0000:01:00.0
[4294671.519000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[4294671.523000] ACPI: Embedded Controller [ECD] (gpe 4) interrupt mode.
[4294671.524000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT]
[4294671.526000] ACPI: PCI Interrupt Link [LNKA] (IRQs 4 *11 14 15)
[4294671.526000] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 5 9 14 15) *0, disabled.
[4294671.526000] ACPI: PCI Interrupt Link [LNKC] (IRQs *10 12)
[4294671.526000] ACPI: PCI Interrupt Link [LNKD] (IRQs 6 7) *0, disabled.
[4294671.527000] Linux Plug and Play Support v0.97 (c) Adam Belay
[4294671.527000] pnp: PnP ACPI init
[4294671.528000] pnp: PnP ACPI: found 8 devices
[4294671.528000] PnPBIOS: Disabled by ACPI PNP
[4294671.528000] PCI: Using ACPI for IRQ routing
[4294671.528000] PCI: Routing PCI interrupts for all devices because "pci=routeirq" specified
[4294671.528000] **** SET: Misaligned resource pointer: ddfbc0c2 Type 07 Len 0
[4294671.528000] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11
[4294671.528000] PCI: setting IRQ 11 as level-triggered
[4294671.528000] ACPI: PCI Interrupt 0000:00:09.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
[4294671.528000] **** SET: Misaligned resource pointer: ddfbc0c2 Type 07 Len 0
[4294671.528000] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 10
[4294671.528000] PCI: setting IRQ 10 as level-triggered
[4294671.528000] ACPI: PCI Interrupt 0000:00:0a.0[A] -> Link [LNKC] -> GSI 10 (level, low) -> IRQ 10
[4294671.528000] **** SET: Misaligned resource pointer: ddfbc0c2 Type 07 Len 0
[4294671.528000] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 7
[4294671.528000] PCI: setting IRQ 7 as level-triggered
[4294671.528000] ACPI: PCI Interrupt 0000:00:10.0[A] -> Link [LNKD] -> GSI 7 (level, low) -> IRQ 7
[4294671.528000] ACPI: PCI Interrupt 0000:00:10.1[B] -> Link [LNKD] -> GSI 7 (level, low) -> IRQ 7
[4294671.528000] ACPI: PCI Interrupt 0000:00:10.2[C] -> Link [LNKD] -> GSI 7 (level, low) -> IRQ 7
[4294671.528000] ACPI: PCI Interrupt 0000:00:10.3[D] -> Link [LNKD] -> GSI 7 (level, low) -> IRQ 7
[4294671.528000] ACPI: PCI Interrupt 0000:00:11.1[A]: no GSI
[4294671.528000] ACPI: PCI Interrupt 0000:00:11.5[C] -> Link [LNKC] -> GSI 10 (level, low) -> IRQ 10
[4294671.529000] ACPI: PCI Interrupt 0000:00:11.6[C] -> Link [LNKC] -> GSI 10 (level, low) -> IRQ 10
[4294671.529000] ACPI: PCI Interrupt 0000:00:12.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
[4294671.529000] **** SET: Misaligned resource pointer: ddfbc0c2 Type 07 Len 0
[4294671.529000] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 9
[4294671.529000] PCI: setting IRQ 9 as level-triggered
[4294671.529000] ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [LNKB] -> GSI 9 (level, low) -> IRQ 9
[4294671.532000] PCI: Bridge: 0000:00:01.0
[4294671.532000]   IO window: disabled.
[4294671.532000]   MEM window: dde00000-dfefffff
[4294671.532000]   PREFETCH window: d5d00000-ddcfffff
[4294671.532000] PCI: Bus 2, cardbus bridge: 0000:00:0a.0
[4294671.532000]   IO window: 00001000-000010ff
[4294671.532000]   IO window: 00001400-000014ff
[4294671.532000]   PREFETCH window: 20000000-21ffffff
[4294671.532000]   MEM window: 22000000-23ffffff
[4294671.532000] PCI: Setting latency timer of device 0000:00:01.0 to 64
[4294671.532000] ACPI: PCI Interrupt 0000:00:0a.0[A] -> Link [LNKC] -> GSI 10 (level, low) -> IRQ 10
[4294671.533000] audit: initializing netlink socket (disabled)
[4294671.533000] audit(1149359159.532:1): initialized
[4294671.533000] VFS: Disk quotas dquot_6.5.1
[4294671.533000] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[4294671.533000] Initializing Cryptographic API
[4294671.533000] io scheduler noop registered
[4294671.533000] io scheduler anticipatory registered
[4294671.533000] io scheduler deadline registered
[4294671.533000] io scheduler cfq registered
[4294671.533000] isapnp: Scanning for PnP cards...
[4294671.890000] isapnp: No Plug & Play device found
[4294671.905000] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[4294671.906000] i8042.c: Detected active multiplexing controller, rev 1.1.
[4294671.908000] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[4294671.908000] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[4294671.908000] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[4294671.908000] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[4294671.908000] serio: i8042 KBD port at 0x60,0x64 irq 1
[4294671.908000] Serial: 8250/16550 driver $Revision: 1.90 $ 48 ports, IRQ sharing enabled
[4294671.911000] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[4294671.911000] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[4294671.911000] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[4294671.911000] mice: PS/2 mouse device common for all mice
[4294671.911000] EISA: Probing bus 0 at eisa.0
[4294671.911000] Cannot allocate resource for EISA slot 1
[4294671.911000] EISA: Detected 0 cards.
[4294671.911000] NET: Registered protocol family 2
[4294671.920000] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
[4294671.920000] TCP established hash table entries: 16384 (order: 4, 65536 bytes)
[4294671.920000] TCP bind hash table entries: 16384 (order: 4, 65536 bytes)
[4294671.920000] TCP: Hash tables configured (established 16384 bind 16384)
[4294671.920000] TCP reno registered
[4294671.920000] TCP bic registered
[4294671.920000] NET: Registered protocol family 1
[4294671.920000] NET: Registered protocol family 8
[4294671.920000] NET: Registered protocol family 20
[4294671.920000] Using IPI Shortcut mode
[4294671.920000] ACPI wakeup devices: 
[4294671.920000] SLPB PCI0 USB1 USB2 USB3 EHCI  MC9 ILAN 
[4294671.920000] ACPI: (supports S0 S3 S4 S5)
[4294671.920000] Freeing unused kernel memory: 288k freed
[4294671.976000] vga16fb: initializing
[4294671.976000] vga16fb: mapped to 0xc00a0000
[4294672.070000] input: AT Translated Set 2 keyboard as /class/input/input0
[4294672.116000] Console: switching to colour frame buffer device 80x25
[4294672.116000] fb0: VGA16 VGA frame buffer device
[4294673.207000] Capability LSM initialized
[4294673.243000] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
[4294673.368000] ACPI: Thermal Zone [THRM] (0 C)
[4294673.802000] VP_IDE: IDE controller at PCI slot 0000:00:11.1
[4294673.802000] ACPI: PCI Interrupt 0000:00:11.1[A]: no GSI
[4294673.802000] PCI: Via IRQ fixup for 0000:00:11.1, from 255 to 15
[4294673.802000] VP_IDE: chipset revision 6
[4294673.802000] VP_IDE: not 100% native mode: will probe irqs later
[4294673.802000] VP_IDE: VIA vt8235 (rev 00) IDE UDMA133 controller on pci0000:00:11.1
[4294673.802000]     ide0: BM-DMA at 0xfc00-0xfc07, BIOS settings: hda:DMA, hdb:pio
[4294673.802000]     ide1: BM-DMA at 0xfc08-0xfc0f, BIOS settings: hdc:DMA, hdd:pio
[4294673.802000] Probing IDE interface ide0...
[4294674.188000] hda: IC25N080ATMR04-0, ATA DISK drive
[4294674.494000] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[4294674.516000] Probing IDE interface ide1...
[4294675.310000] hdc: QSI DVD+/-RW SDW-082S, ATAPI CD/DVD-ROM drive
[4294675.922000] ide1 at 0x170-0x177,0x376 on irq 15
[4294675.930000] hda: max request size: 1024KiB
[4294675.939000] hda: 156301488 sectors (80026 MB) w/7884KiB Cache, CHS=16383/255/63, UDMA(100)
[4294675.939000] hda: cache flushes supported
[4294675.939000]  hda: hda1 hda2 < hda5 >
[4294676.039000] hdc: ATAPI 24X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache, UDMA(33)
[4294676.039000] Uniform CD-ROM driver Revision: 3.20
[4294676.343000] usbcore: registered new driver usbfs
[4294676.343000] usbcore: registered new driver hub
[4294676.345000] USB Universal Host Controller Interface driver v2.3
[4294676.345000] ACPI: PCI Interrupt 0000:00:10.0[A] -> Link [LNKD] -> GSI 7 (level, low) -> IRQ 7
[4294676.345000] PCI: Via IRQ fixup for 0000:00:10.0, from 0 to 7
[4294676.345000] uhci_hcd 0000:00:10.0: UHCI Host Controller
[4294676.346000] uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 1
[4294676.346000] uhci_hcd 0000:00:10.0: irq 7, io base 0x0000e400
[4294676.346000] hub 1-0:1.0: USB hub found
[4294676.346000] hub 1-0:1.0: 2 ports detected
[4294676.447000] ACPI: PCI Interrupt 0000:00:10.1[B] -> Link [LNKD] -> GSI 7 (level, low) -> IRQ 7
[4294676.447000] PCI: Via IRQ fixup for 0000:00:10.1, from 0 to 7
[4294676.447000] uhci_hcd 0000:00:10.1: UHCI Host Controller
[4294676.447000] uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 2
[4294676.447000] uhci_hcd 0000:00:10.1: irq 7, io base 0x0000e800
[4294676.447000] hub 2-0:1.0: USB hub found
[4294676.447000] hub 2-0:1.0: 2 ports detected
[4294676.548000] ACPI: PCI Interrupt 0000:00:10.2[C] -> Link [LNKD] -> GSI 7 (level, low) -> IRQ 7
[4294676.548000] PCI: Via IRQ fixup for 0000:00:10.2, from 0 to 7
[4294676.548000] uhci_hcd 0000:00:10.2: UHCI Host Controller
[4294676.548000] uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 3
[4294676.548000] uhci_hcd 0000:00:10.2: irq 7, io base 0x0000ec00
[4294676.548000] hub 3-0:1.0: USB hub found
[4294676.548000] hub 3-0:1.0: 2 ports detected
[4294676.651000] ACPI: PCI Interrupt 0000:00:10.3[D] -> Link [LNKD] -> GSI 7 (level, low) -> IRQ 7
[4294676.651000] PCI: Via IRQ fixup for 0000:00:10.3, from 0 to 7
[4294676.651000] ehci_hcd 0000:00:10.3: EHCI Host Controller
[4294676.651000] ehci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 4
[4294676.651000] ehci_hcd 0000:00:10.3: irq 7, io mem 0xdfffdf00
[4294676.651000] ehci_hcd 0000:00:10.3: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[4294676.651000] hub 4-0:1.0: USB hub found
[4294676.651000] hub 4-0:1.0: 6 ports detected
[4294676.941000] Attempting manual resume
[4294677.012000] EXT3-fs: INFO: recovery required on readonly filesystem.
[4294677.012000] EXT3-fs: write access will be enabled during recovery.
[4294678.150000] EXT3-fs: recovery complete.
[4294678.150000] kjournald starting.  Commit interval 5 seconds
[4294678.151000] EXT3-fs: mounted filesystem with ordered data mode.
[4294690.006000] ACPI: PCI Interrupt 0000:00:0a.0[A] -> Link [LNKC] -> GSI 10 (level, low) -> IRQ 10
[4294690.006000] Yenta: CardBus bridge found at 0000:00:0a.0 [14ff:c602]
[4294690.006000] Yenta O2: res at 0x94/0xD4: 00/ea
[4294690.006000] Yenta O2: enabling read prefetch/write burst
[4294690.031000] irda_init()
[4294690.031000] NET: Registered protocol family 23
[4294690.048000] Linux agpgart interface v0.101 (c) Dave Jones
[4294690.055000] agpgart: Detected VIA KM400/KM400A chipset
[4294690.060000] agpgart: AGP aperture is 64M @ 0xe0000000
[4294690.073000] ACPI: PCI Interrupt 0000:00:09.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
[4294690.073000] rt2500 1.1.0 BETA3 2005/07/31 http://rt2x00.serialmonkey.com
[4294690.121000] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[4294690.128000] Yenta: ISA IRQ mask 0x0038, PCI irq 10
[4294690.128000] Socket status: 30000006
[4294690.152000] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[4294690.760000] via-rhine.c:v1.10-LK1.2.0-2.6 June-10-2004 Written by Donald Becker
[4294690.760000] ACPI: PCI Interrupt 0000:00:12.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
[4294690.764000] eth0: VIA Rhine II at 0x1d800, 00:40:45:25:f1:6c, IRQ 11.
[4294690.765000] eth0: MII PHY found at address 1, status 0x7869 advertising 05e1 Link 45e1.
[4294690.832000] ACPI: PCI Interrupt 0000:00:11.6[C] -> Link [LNKC] -> GSI 10 (level, low) -> IRQ 10
[4294690.833000] PCI: Setting latency timer of device 0000:00:11.6 to 64
[4294690.860000] ACPI: PCI Interrupt 0000:00:11.5[C] -> Link [LNKC] -> GSI 10 (level, low) -> IRQ 10
[4294690.860000] PCI: Setting latency timer of device 0000:00:11.5 to 64
[4294690.975000] Real Time Clock Driver v1.12
[4294690.991000] input: PC Speaker as /class/input/input1
[4294691.461000] cs: IO port probe 0x100-0x3af: clean.
[4294691.463000] cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7
[4294691.464000] cs: IO port probe 0x820-0x8ff: clean.
[4294691.465000] cs: IO port probe 0xc00-0xcf7: clean.
[4294691.466000] cs: IO port probe 0xa00-0xaff: clean.
[4294691.672000] Synaptics Touchpad, model: 1, fw: 5.1, id: 0x8f40b1, caps: 0x80471b/0x0
[4294691.712000] input: SynPS/2 Synaptics TouchPad as /class/input/input2
[4294691.835000] ts: Compaq touchscreen protocol output
[4294691.884000] eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
[4294692.933000] NET: Registered protocol family 17
[4294693.024000] lp: driver loaded but no devices found
[4294693.087000] Adding 1413680k swap on /dev/hda5.  Priority:-1 extents:1 across:1413680k
[4294693.276000] EXT3 FS on hda1, internal journal
[4294693.441000] md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
[4294693.441000] md: bitmap version 4.39
[4294694.030000] device-mapper: 4.4.0-ioctl (2005-01-12) initialised: dm-devel@redhat.com
[4294694.654000] cdrom: open failed.
[4294697.439000] NET: Registered protocol family 10
[4294697.439000] lo: Disabled Privacy Extensions
[4294697.440000] IPv6 over IPv4 tunneling driver
[4294700.917000] ACPI: AC Adapter [AC] (on-line)
[4294700.984000] ACPI: Battery Slot [BAT0] (battery present)
[4294701.054000] ACPI: Power Button (FF) [PWRF]
[4294701.054000] ACPI: Power Button (CM) [PWRB]
[4294701.054000] ACPI: Sleep Button (CM) [SLPB]
[4294701.054000] ACPI: Lid Switch [LIDD]
[4294701.175000] ibm_acpi: ec object not found
[4294701.201000] pcc_acpi: loading...
[4294701.301000] ACPI: Video Device [VGA] (multi-head: yes  rom: no  post: no)
[4294701.713000] powernow: PowerNOW! Technology present. Can scale: frequency and voltage.
[4294701.718000] Detected 1659.802 MHz processor.
[4294701.722000] powernow: SGTC: 13333
[4294701.722000] powernow: Minimum speed 398 MHz. Maximum speed 1659 MHz.
[4294705.786000] [drm] Initialized drm 1.0.1 20051102
[4294705.802000] ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [LNKB] -> GSI 9 (level, low) -> IRQ 9
[4294705.802000] PCI: Via IRQ fixup for 0000:01:00.0, from 11 to 9
[4294705.802000] [drm] Initialized via 2.7.4 20051116 on minor 0
[4294705.803000] mtrr: 0xd8000000,0x2000000 overlaps existing 0xd8000000,0x200000
[4294706.343000] agpgart: Found an AGP 3.5 compliant device at 0000:00:00.0.
[4294706.343000] agpgart: Device is in legacy mode, falling back to 2.x
[4294706.343000] agpgart: Putting AGP V2 device at 0000:00:00.0 into 4x mode
[4294706.343000] agpgart: Putting AGP V2 device at 0000:01:00.0 into 4x mode
[4294707.554000] irq 11: nobody cared (try booting with the "irqpoll" option)
[4294707.554000]  [<c013ee42>] __report_bad_irq+0x22/0x80
[4294707.554000]  [<c013ef38>] note_interrupt+0x68/0xc0
[4294707.554000]  [<c013e7fc>] __do_IRQ+0xbc/0xe0
[4294707.554000]  [<c010597a>] do_IRQ+0x1a/0x30
[4294707.554000]  [<c01040ea>] common_interrupt+0x1a/0x20
[4294707.554000]  [<c0121520>] __do_softirq+0x30/0xb0
[4294707.554000]  [<c01215d5>] do_softirq+0x35/0x40
[4294707.554000]  [<c0121685>] irq_exit+0x35/0x40
[4294707.554000]  [<c010597f>] do_IRQ+0x1f/0x30
[4294707.554000]  [<c01040ea>] common_interrupt+0x1a/0x20
[4294707.554000] handlers:
[4294707.554000] [<dea0e6f0>] (rhine_interrupt+0x0/0x240 [via_rhine])
[4294707.554000] Disabling IRQ #11
[4294708.554000] eth0: no IPv6 routers present
[4294709.024000] ppdev: user-space parallel port driver
[4294709.516000] apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
[4294709.516000] apm: overridden by ACPI.
[4294710.496000] ra0 (WE) : Driver using old /proc/net/wireless support, please fix driver !
[4294712.925000] Bluetooth: Core ver 2.8
[4294712.925000] NET: Registered protocol family 31
[4294712.925000] Bluetooth: HCI device and connection manager initialized
[4294712.925000] Bluetooth: HCI socket layer initialized
[4294713.311000] Bluetooth: L2CAP ver 2.8
[4294713.311000] Bluetooth: L2CAP socket layer initialized
[4294713.330000] Bluetooth: RFCOMM socket layer initialized
[4294713.330000] Bluetooth: RFCOMM TTY layer initialized
[4294713.330000] Bluetooth: RFCOMM ver 1.7
[4295085.258000] ACPI: PCI interrupt for device 0000:00:09.0 disabled
[4296433.415000] usb 1-1: new full speed USB device using uhci_hcd and address 2
[4296433.963000] SCSI subsystem initialized
[4296434.021000] Initializing USB Mass Storage driver...
[4296434.023000] scsi0 : SCSI emulation for USB Mass Storage devices
[4296434.024000] usb-storage: device found at 2
[4296434.024000] usb-storage: waiting for device to settle before scanning
[4296434.024000] usbcore: registered new driver usb-storage
[4296434.024000] USB Mass Storage support registered.
[4296439.028000]   Vendor: Fujifilm  Model: USB Drive         Rev: 3.06
[4296439.028000]   Type:   Direct-Access                      ANSI SCSI revision: 00
[4296439.033000] usb-storage: device scan complete
[4296439.143000] Driver 'sd' needs updating - please use bus_type methods
[4296439.158000] SCSI device sda: 15568 512-byte hdwr sectors (8 MB)
[4296439.161000] sda: Write Protect is off
[4296439.161000] sda: Mode Sense: 45 00 00 08
[4296439.161000] sda: assuming drive cache: write through
[4296439.304000] SCSI device sda: 15568 512-byte hdwr sectors (8 MB)
[4296439.445000] sda: Write Protect is off
[4296439.446000] sda: Mode Sense: 45 00 00 08
[4296439.446000] sda: assuming drive cache: write through
[4296439.446000]  sda: sda1
[4296439.457000] sd 0:0:0:0: Attached scsi removable disk sda
[4296439.497000] sd 0:0:0:0: Attached scsi generic sg0 type 0
[4296440.422000] FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!