[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.31-14-generic (buildd@rothera) (gcc version 4.4.1 (Ubuntu 4.4.1-4ubuntu8) ) #48-Ubuntu SMP Fri Oct 16 14:04:26 UTC 2009 (Ubuntu 2.6.31-14.48-generic) [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] NSC Geode by NSC [ 0.000000] Cyrix CyrixInstead [ 0.000000] Centaur CentaurHauls [ 0.000000] Transmeta GenuineTMx86 [ 0.000000] Transmeta TransmetaCPU [ 0.000000] UMC UMC UMC UMC [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009ec00 (usable) [ 0.000000] BIOS-e820: 000000000009ec00 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000e4c00 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 00000000bf680000 (usable) [ 0.000000] BIOS-e820: 00000000bf680000 - 00000000bf698000 (ACPI data) [ 0.000000] BIOS-e820: 00000000bf698000 - 00000000bf6dc000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000bf6dc000 - 00000000c0000000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] BIOS-e820: 00000000ffe00000 - 0000000100000000 (reserved) [ 0.000000] DMI 2.5 present. [ 0.000000] AMI BIOS detected: BIOS may corrupt low RAM, working around it. [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) [ 0.000000] last_pfn = 0xbf680 max_arch_pfn = 0x100000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-E3FFF write-protect [ 0.000000] E4000-EBFFF write-through [ 0.000000] EC000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000 mask F80000000 write-back [ 0.000000] 1 base 080000000 mask FC0000000 write-back [ 0.000000] 2 base 0BF700000 mask FFFF00000 uncachable [ 0.000000] 3 base 0BF800000 mask FFF800000 uncachable [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] Scanning 0 areas for low memory corruption [ 0.000000] modified physical RAM map: [ 0.000000] modified: 0000000000000000 - 0000000000010000 (reserved) [ 0.000000] modified: 0000000000010000 - 000000000009ec00 (usable) [ 0.000000] modified: 000000000009ec00 - 00000000000a0000 (reserved) [ 0.000000] modified: 00000000000e4c00 - 0000000000100000 (reserved) [ 0.000000] modified: 0000000000100000 - 00000000bf680000 (usable) [ 0.000000] modified: 00000000bf680000 - 00000000bf698000 (ACPI data) [ 0.000000] modified: 00000000bf698000 - 00000000bf6dc000 (ACPI NVS) [ 0.000000] modified: 00000000bf6dc000 - 00000000c0000000 (reserved) [ 0.000000] modified: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] modified: 00000000ffe00000 - 0000000100000000 (reserved) [ 0.000000] initial memory mapped : 0 - 00c00000 [ 0.000000] init_memory_mapping: 0000000000000000-00000000377fe000 [ 0.000000] Using x86 segment limits to approximate NX protection [ 0.000000] 0000000000 - 0000400000 page 4k [ 0.000000] 0000400000 - 0037400000 page 2M [ 0.000000] 0037400000 - 00377fe000 page 4k [ 0.000000] kernel direct mapping tables up to 377fe000 @ 10000-15000 [ 0.000000] RAMDISK: 3782a000 - 37fef185 [ 0.000000] Allocated new RAMDISK: 008ad000 - 01072185 [ 0.000000] Move RAMDISK from 000000003782a000 - 0000000037fef184 to 008ad000 - 01072184 [ 0.000000] ACPI: RSDP 000fae10 00024 (v02 ACPIAM) [ 0.000000] ACPI: XSDT bf680100 00064 (v01 081809 XSDT1203 20090818 MSFT 00000097) [ 0.000000] ACPI: FACP bf680290 000F4 (v03 081809 FACP1203 20090818 MSFT 00000097) [ 0.000000] ACPI: DSDT bf6804b0 0C3F1 (v01 A1146 A1146001 00000001 INTL 20060113) [ 0.000000] ACPI: FACS bf698000 00040 [ 0.000000] ACPI: APIC bf680390 000D8 (v01 081809 APIC1203 20090818 MSFT 00000097) [ 0.000000] ACPI: MCFG bf680470 0003C (v01 081809 OEMMCFG 20090818 MSFT 00000097) [ 0.000000] ACPI: OEMB bf698040 00072 (v01 081809 OEMB1203 20090818 MSFT 00000097) [ 0.000000] ACPI: HPET bf68f4b0 00038 (v01 081809 OEMHPET 20090818 MSFT 00000097) [ 0.000000] ACPI: DMAR bf6980c0 00138 (v01 AMI OEMDMAR 00000001 MSFT 00000097) [ 0.000000] ACPI: OSFR bf68f4f0 000B0 (v01 081809 OEMOSFR 20090818 MSFT 00000097) [ 0.000000] ACPI: SSDT bf69a880 0249F (v01 DpgPmm CpuPm 00000012 INTL 20060113) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] 2174MB HIGHMEM available. [ 0.000000] 887MB LOWMEM available. [ 0.000000] mapped low ram: 0 - 377fe000 [ 0.000000] low ram: 0 - 377fe000 [ 0.000000] node 0 low ram: 00000000 - 377fe000 [ 0.000000] node 0 bootmap 00011000 - 00017f00 [ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 00377fe000] [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] [ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000] [ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000] [ 0.000000] #3 [0000100000 - 00008a80a0] TEXT DATA BSS ==> [0000100000 - 00008a80a0] [ 0.000000] #4 [000009ec00 - 0000100000] BIOS reserved ==> [000009ec00 - 0000100000] [ 0.000000] #5 [00008a9000 - 00008ac224] BRK ==> [00008a9000 - 00008ac224] [ 0.000000] #6 [0000010000 - 0000011000] PGTABLE ==> [0000010000 - 0000011000] [ 0.000000] #7 [00008ad000 - 0001072185] NEW RAMDISK ==> [00008ad000 - 0001072185] [ 0.000000] #8 [0000011000 - 0000018000] BOOTMAP ==> [0000011000 - 0000018000] [ 0.000000] found SMP MP-table at [c00ff780] ff780 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000010 -> 0x00001000 [ 0.000000] Normal 0x00001000 -> 0x000377fe [ 0.000000] HighMem 0x000377fe -> 0x000bf680 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[2] active PFN ranges [ 0.000000] 0: 0x00000010 -> 0x0000009e [ 0.000000] 0: 0x00000100 -> 0x000bf680 [ 0.000000] On node 0 totalpages: 783886 [ 0.000000] free_area_init_node: node 0, pgdat c0784900, node_mem_map c1073200 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 3950 pages, LIFO batch:0 [ 0.000000] Normal zone: 1744 pages used for memmap [ 0.000000] Normal zone: 221486 pages, LIFO batch:31 [ 0.000000] HighMem zone: 4350 pages used for memmap [ 0.000000] HighMem zone: 552324 pages, LIFO batch:31 [ 0.000000] Using APIC driver default [ 0.000000] ACPI: PM-Timer IO Port: 0x808 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x03] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x05] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x07] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x09] lapic_id[0x88] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x89] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x8a] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x8b] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x0d] lapic_id[0x8c] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x0e] lapic_id[0x8d] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x0f] lapic_id[0x8e] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x10] lapic_id[0x8f] disabled) [ 0.000000] ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: IOAPIC (id[0x09] address[0xfec8a000] gsi_base[24]) [ 0.000000] IOAPIC[1]: apic_id 9, version 32, address 0xfec8a000, GSI 24-47 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Enabling APIC mode: Flat. Using 2 I/O APICs [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a301 base: 0xfed00000 [ 0.000000] 16 Processors exceeds NR_CPUS limit of 8 [ 0.000000] SMP: Allowing 8 CPUs, 0 hotplug CPUs [ 0.000000] nr_irqs_gsi: 48 [ 0.000000] PM: Registered nosave memory: 000000000009e000 - 000000000009f000 [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e5000 [ 0.000000] PM: Registered nosave memory: 00000000000e5000 - 0000000000100000 [ 0.000000] Allocating PCI resources starting at c0000000 (gap: c0000000:3ee00000) [ 0.000000] NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 14 pages at c2873000, static data 35612 bytes [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 777760 [ 0.000000] Kernel command line: root=/dev/mapper/OSvg-rootlv ro irqpoll vga=775 ipv6.disable=1 [ 0.000000] Misrouted IRQ fixup and polling support enabled [ 0.000000] This may significantly impact system performance [ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Enabling fast FPU save and restore... done. [ 0.000000] Enabling unmasked SIMD FPU exception support... done. [ 0.000000] Initializing CPU#0 [ 0.000000] allocated 15679680 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] Initializing HighMem for node 0 (000377fe:000bf680) [ 0.000000] Memory: 3077664k/3136000k available (4565k kernel code, 56972k reserved, 2143k data, 540k init, 2226696k highmem) [ 0.000000] virtual kernel memory layout: [ 0.000000] fixmap : 0xfff1d000 - 0xfffff000 ( 904 kB) [ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB) [ 0.000000] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB) [ 0.000000] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB) [ 0.000000] .init : 0xc078e000 - 0xc0815000 ( 540 kB) [ 0.000000] .data : 0xc0575554 - 0xc078d308 (2143 kB) [ 0.000000] .text : 0xc0100000 - 0xc0575554 (4565 kB) [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.000000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1 [ 0.000000] NR_IRQS:2304 nr_irqs:880 [ 0.000000] Extended CMOS year: 2000 [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 3073.506 MHz processor. [ 0.000012] Console: colour dummy device 80x25 [ 0.000014] console [tty0] enabled [ 0.000300] hpet clockevent registered [ 0.000303] HPET: 4 timers in total, 0 timers will be used for per-cpu timer [ 0.000308] Calibrating delay loop (skipped), value calculated using timer frequency.. 6147.01 BogoMIPS (lpj=12294024) [ 0.000319] Security Framework initialized [ 0.000330] AppArmor: AppArmor initialized [ 0.000334] Mount-cache hash table entries: 512 [ 0.000403] Initializing cgroup subsys ns [ 0.000406] Initializing cgroup subsys cpuacct [ 0.000410] Initializing cgroup subsys memory [ 0.000414] Initializing cgroup subsys freezer [ 0.000416] Initializing cgroup subsys net_cls [ 0.000425] CPU: Physical Processor ID: 0 [ 0.000426] CPU: Processor Core ID: 0 [ 0.000430] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.000432] CPU: L2 cache: 256K [ 0.000434] CPU: L3 cache: 8192K [ 0.000437] mce: CPU supports 9 MCE banks [ 0.000446] CPU0: Thermal monitoring enabled (TM1) [ 0.000449] CPU 0 MCA banks CMCI:2 CMCI:3 CMCI:5 CMCI:6 SHD:8 [ 0.000457] using mwait in idle threads. [ 0.000461] Performance Counters: Nehalem/Corei7 events, Intel PMU driver. [ 0.000466] ... version: 3 [ 0.000468] ... bit width: 48 [ 0.000470] ... generic counters: 4 [ 0.000472] ... value mask: 0000ffffffffffff [ 0.000474] ... max period: 000000007fffffff [ 0.000476] ... fixed-purpose counters: 3 [ 0.000478] ... counter mask: 000000070000000f [ 0.000481] Checking 'hlt' instruction... OK. [ 0.017889] ACPI: Core revision 20090521 [ 0.096514] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.136180] CPU0: Intel(R) Core(TM) i7 CPU 950 @ 3.07GHz stepping 05 [ 0.240271] Booting processor 1 APIC 0x2 ip 0x6000 [ 0.250448] Initializing CPU#1 [ 0.328152] Calibrating delay using timer specific routine.. 6147.21 BogoMIPS (lpj=12294425) [ 0.328159] CPU: Physical Processor ID: 0 [ 0.328160] CPU: Processor Core ID: 1 [ 0.328162] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.328163] CPU: L2 cache: 256K [ 0.328163] CPU: L3 cache: 8192K [ 0.328166] mce: CPU supports 9 MCE banks [ 0.328173] CPU1: Thermal monitoring enabled (TM1) [ 0.328176] CPU 1 MCA banks CMCI:2 CMCI:3 CMCI:5 SHD:6 SHD:8 [ 0.328855] x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106 [ 0.329460] CPU1: Intel(R) Core(TM) i7 CPU 950 @ 3.07GHz stepping 05 [ 0.329486] Skipping synchronization checks as TSC is reliable. [ 0.329552] Booting processor 2 APIC 0x4 ip 0x6000 [ 0.339825] Initializing CPU#2 [ 0.420102] Calibrating delay using timer specific routine.. 6146.93 BogoMIPS (lpj=12293861) [ 0.420107] CPU: Physical Processor ID: 0 [ 0.420108] CPU: Processor Core ID: 2 [ 0.420110] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.420111] CPU: L2 cache: 256K [ 0.420111] CPU: L3 cache: 8192K [ 0.420114] mce: CPU supports 9 MCE banks [ 0.420121] CPU2: Thermal monitoring enabled (TM1) [ 0.420123] CPU 2 MCA banks CMCI:2 CMCI:3 CMCI:5 SHD:6 SHD:8 [ 0.420803] x86 PAT enabled: cpu 2, old 0x7040600070406, new 0x7010600070106 [ 0.421404] CPU2: Intel(R) Core(TM) i7 CPU 950 @ 3.07GHz stepping 05 [ 0.421434] Skipping synchronization checks as TSC is reliable. [ 0.421498] Booting processor 3 APIC 0x6 ip 0x6000 [ 0.431771] Initializing CPU#3 [ 0.512053] Calibrating delay using timer specific routine.. 6146.93 BogoMIPS (lpj=12293875) [ 0.512059] CPU: Physical Processor ID: 0 [ 0.512059] CPU: Processor Core ID: 3 [ 0.512061] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.512062] CPU: L2 cache: 256K [ 0.512063] CPU: L3 cache: 8192K [ 0.512065] mce: CPU supports 9 MCE banks [ 0.512072] CPU3: Thermal monitoring enabled (TM1) [ 0.512075] CPU 3 MCA banks CMCI:2 CMCI:3 CMCI:5 SHD:6 SHD:8 [ 0.512753] x86 PAT enabled: cpu 3, old 0x7040600070406, new 0x7010600070106 [ 0.513351] CPU3: Intel(R) Core(TM) i7 CPU 950 @ 3.07GHz stepping 05 [ 0.513380] Skipping synchronization checks as TSC is reliable. [ 0.513446] Booting processor 4 APIC 0x1 ip 0x6000 [ 0.523620] Initializing CPU#4 [ 0.604005] Calibrating delay using timer specific routine.. 6146.91 BogoMIPS (lpj=12293838) [ 0.604014] CPU: Physical Processor ID: 0 [ 0.604015] CPU: Processor Core ID: 0 [ 0.604017] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.604018] CPU: L2 cache: 256K [ 0.604019] CPU: L3 cache: 8192K [ 0.604022] mce: CPU supports 9 MCE banks [ 0.604030] CPU4: Thermal monitoring enabled (TM1) [ 0.604033] CPU 4 MCA banks SHD:2 SHD:3 SHD:5 SHD:6 SHD:8 [ 0.604859] x86 PAT enabled: cpu 4, old 0x7040600070406, new 0x7010600070106 [ 0.605594] CPU4: Intel(R) Core(TM) i7 CPU 950 @ 3.07GHz stepping 05 [ 0.605628] Skipping synchronization checks as TSC is reliable. [ 0.605702] Booting processor 5 APIC 0x3 ip 0x6000 [ 0.615876] Initializing CPU#5 [ 0.695956] Calibrating delay using timer specific routine.. 6146.93 BogoMIPS (lpj=12293866) [ 0.695961] CPU: Physical Processor ID: 0 [ 0.695962] CPU: Processor Core ID: 1 [ 0.695963] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.695964] CPU: L2 cache: 256K [ 0.695965] CPU: L3 cache: 8192K [ 0.695967] mce: CPU supports 9 MCE banks [ 0.695975] CPU5: Thermal monitoring enabled (TM1) [ 0.695977] CPU 5 MCA banks SHD:2 SHD:3 SHD:5 SHD:6 SHD:8 [ 0.696850] x86 PAT enabled: cpu 5, old 0x7040600070406, new 0x7010600070106 [ 0.697655] CPU5: Intel(R) Core(TM) i7 CPU 950 @ 3.07GHz stepping 05 [ 0.697683] Skipping synchronization checks as TSC is reliable. [ 0.697751] Booting processor 6 APIC 0x5 ip 0x6000 [ 0.708024] Initializing CPU#6 [ 0.787907] Calibrating delay using timer specific routine.. 6146.93 BogoMIPS (lpj=12293866) [ 0.787912] CPU: Physical Processor ID: 0 [ 0.787913] CPU: Processor Core ID: 2 [ 0.787915] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.787916] CPU: L2 cache: 256K [ 0.787916] CPU: L3 cache: 8192K [ 0.787919] mce: CPU supports 9 MCE banks [ 0.787926] CPU6: Thermal monitoring enabled (TM1) [ 0.787928] CPU 6 MCA banks SHD:2 SHD:3 SHD:5 SHD:6 SHD:8 [ 0.788801] x86 PAT enabled: cpu 6, old 0x7040600070406, new 0x7010600070106 [ 0.789604] CPU6: Intel(R) Core(TM) i7 CPU 950 @ 3.07GHz stepping 05 [ 0.789633] Skipping synchronization checks as TSC is reliable. [ 0.789700] Booting processor 7 APIC 0x7 ip 0x6000 [ 0.799874] Initializing CPU#7 [ 0.879859] Calibrating delay using timer specific routine.. 6146.87 BogoMIPS (lpj=12293757) [ 0.879866] CPU: Physical Processor ID: 0 [ 0.879867] CPU: Processor Core ID: 3 [ 0.879868] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.879869] CPU: L2 cache: 256K [ 0.879870] CPU: L3 cache: 8192K [ 0.879872] mce: CPU supports 9 MCE banks [ 0.879880] CPU7: Thermal monitoring enabled (TM1) [ 0.879882] CPU 7 MCA banks SHD:2 SHD:3 SHD:5 SHD:6 SHD:8 [ 0.880755] x86 PAT enabled: cpu 7, old 0x7040600070406, new 0x7010600070106 [ 0.881594] CPU7: Intel(R) Core(TM) i7 CPU 950 @ 3.07GHz stepping 05 [ 0.881623] Skipping synchronization checks as TSC is reliable. [ 0.881640] Brought up 8 CPUs [ 0.881643] Total of 8 processors activated (49175.75 BogoMIPS). [ 0.881660] CPU0 attaching sched-domain: [ 0.881662] domain 0: span 0,4 level SIBLING [ 0.881663] groups: 0 4 [ 0.881666] domain 1: span 0-7 level MC [ 0.881667] groups: 0,4 1,5 2,6 3,7 [ 0.881671] CPU1 attaching sched-domain: [ 0.881672] domain 0: span 1,5 level SIBLING [ 0.881673] groups: 1 5 [ 0.881675] domain 1: span 0-7 level MC [ 0.881676] groups: 1,5 2,6 3,7 0,4 [ 0.881680] CPU2 attaching sched-domain: [ 0.881681] domain 0: span 2,6 level SIBLING [ 0.881682] groups: 2 6 [ 0.881684] domain 1: span 0-7 level MC [ 0.881685] groups: 2,6 3,7 0,4 1,5 [ 0.881688] CPU3 attaching sched-domain: [ 0.881689] domain 0: span 3,7 level SIBLING [ 0.881691] groups: 3 7 [ 0.881693] domain 1: span 0-7 level MC [ 0.881694] groups: 3,7 0,4 1,5 2,6 [ 0.881697] CPU4 attaching sched-domain: [ 0.881698] domain 0: span 0,4 level SIBLING [ 0.881699] groups: 4 0 [ 0.881701] domain 1: span 0-7 level MC [ 0.881702] groups: 0,4 1,5 2,6 3,7 [ 0.881706] CPU5 attaching sched-domain: [ 0.881707] domain 0: span 1,5 level SIBLING [ 0.881708] groups: 5 1 [ 0.881710] domain 1: span 0-7 level MC [ 0.881711] groups: 1,5 2,6 3,7 0,4 [ 0.881714] CPU6 attaching sched-domain: [ 0.881715] domain 0: span 2,6 level SIBLING [ 0.881716] groups: 6 2 [ 0.881718] domain 1: span 0-7 level MC [ 0.881719] groups: 2,6 3,7 0,4 1,5 [ 0.881723] CPU7 attaching sched-domain: [ 0.881724] domain 0: span 3,7 level SIBLING [ 0.881725] groups: 7 3 [ 0.881727] domain 1: span 0-7 level MC [ 0.881728] groups: 3,7 0,4 1,5 2,6 [ 0.882040] Booting paravirtualized kernel on bare hardware [ 0.882163] regulator: core version 0.5 [ 0.882185] Time: 13:34:57 Date: 11/04/09 [ 0.882216] NET: Registered protocol family 16 [ 0.882279] EISA bus registered [ 0.882285] ACPI: bus type pci registered [ 0.882326] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255 [ 0.882330] PCI: Not using MMCONFIG. [ 0.882416] PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=8 [ 0.882419] PCI: Using configuration type 1 for base access [ 0.882999] bio: create slab at 0 [ 0.883735] ACPI: EC: Look up EC in DSDT [ 0.914117] ACPI: Interpreter enabled [ 0.914125] ACPI: (supports S0 S1 S3 S4 S5) [ 0.914144] ACPI: Using IOAPIC for interrupt routing [ 0.914187] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255 [ 0.916005] PCI: MCFG area at e0000000 reserved in ACPI motherboard resources [ 0.916008] PCI: Using MMCONFIG for extended config space [ 0.922356] ACPI Warning: Incorrect checksum in table [OEMB] - 93, should be 8B 20090521 tbutils-246 [ 0.922492] ACPI: No dock devices found. [ 0.922601] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 0.922665] pci 0000:00:00.0: PME# supported from D0 D3hot D3cold [ 0.922669] pci 0000:00:00.0: PME# disabled [ 0.922719] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold [ 0.922723] pci 0000:00:01.0: PME# disabled [ 0.922773] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold [ 0.922777] pci 0000:00:03.0: PME# disabled [ 0.922829] pci 0000:00:07.0: PME# supported from D0 D3hot D3cold [ 0.922833] pci 0000:00:07.0: PME# disabled [ 0.923034] pci 0000:00:1a.0: reg 20 io port: [0xa800-0xa81f] [ 0.923093] pci 0000:00:1a.1: reg 20 io port: [0xa880-0xa89f] [ 0.923151] pci 0000:00:1a.2: reg 20 io port: [0xac00-0xac1f] [ 0.923213] pci 0000:00:1a.7: reg 10 32bit mmio: [0xf7fff000-0xf7fff3ff] [ 0.923261] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold [ 0.923265] pci 0000:00:1a.7: PME# disabled [ 0.923301] pci 0000:00:1b.0: reg 10 64bit mmio: [0xf7ff8000-0xf7ffbfff] [ 0.923336] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.923340] pci 0000:00:1b.0: PME# disabled [ 0.923389] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.923393] pci 0000:00:1c.0: PME# disabled [ 0.923445] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold [ 0.923449] pci 0000:00:1c.2: PME# disabled [ 0.923500] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold [ 0.923504] pci 0000:00:1c.3: PME# disabled [ 0.923556] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold [ 0.923560] pci 0000:00:1c.4: PME# disabled [ 0.923608] pci 0000:00:1d.0: reg 20 io port: [0xa080-0xa09f] [ 0.923667] pci 0000:00:1d.1: reg 20 io port: [0xa400-0xa41f] [ 0.923726] pci 0000:00:1d.2: reg 20 io port: [0xa480-0xa49f] [ 0.923789] pci 0000:00:1d.7: reg 10 32bit mmio: [0xf7ffe000-0xf7ffe3ff] [ 0.923837] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold [ 0.923843] pci 0000:00:1d.7: PME# disabled [ 0.923948] pci 0000:00:1f.0: quirk: region 0800-087f claimed by ICH6 ACPI/GPIO/TCO [ 0.923953] pci 0000:00:1f.0: quirk: region 0500-053f claimed by ICH6 GPIO [ 0.923957] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0294 (mask 0003) [ 0.923962] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 4700 (mask 001f) [ 0.924018] pci 0000:00:1f.2: reg 10 io port: [0x9c00-0x9c07] [ 0.924022] pci 0000:00:1f.2: reg 14 io port: [0x9880-0x9883] [ 0.924027] pci 0000:00:1f.2: reg 18 io port: [0x9800-0x9807] [ 0.924031] pci 0000:00:1f.2: reg 1c io port: [0x9480-0x9483] [ 0.924035] pci 0000:00:1f.2: reg 20 io port: [0x9400-0x941f] [ 0.924040] pci 0000:00:1f.2: reg 24 32bit mmio: [0xf7ffc000-0xf7ffc7ff] [ 0.924066] pci 0000:00:1f.2: PME# supported from D3hot [ 0.924070] pci 0000:00:1f.2: PME# disabled [ 0.924094] pci 0000:00:1f.3: reg 10 64bit mmio: [0xf7ffd000-0xf7ffd0ff] [ 0.924105] pci 0000:00:1f.3: reg 20 io port: [0x400-0x41f] [ 0.924167] pci 0000:02:00.0: reg 10 32bit mmio: [0xfa000000-0xfaffffff] [ 0.924174] pci 0000:02:00.0: reg 14 64bit mmio: [0xd0000000-0xdfffffff] [ 0.924181] pci 0000:02:00.0: reg 1c 64bit mmio: [0xf8000000-0xf9ffffff] [ 0.924185] pci 0000:02:00.0: reg 24 io port: [0xbc00-0xbc7f] [ 0.924190] pci 0000:02:00.0: reg 30 32bit mmio: [0xfbbe0000-0xfbbfffff] [ 0.924230] pci 0000:00:03.0: bridge io port: [0xb000-0xbfff] [ 0.924233] pci 0000:00:03.0: bridge 32bit mmio: [0xf8000000-0xfbbfffff] [ 0.924237] pci 0000:00:03.0: bridge 64bit mmio pref: [0xd0000000-0xdfffffff] [ 0.924294] pci 0000:00:1c.0: bridge 64bit mmio pref: [0xf6f00000-0xf6ffffff] [ 0.924335] pci 0000:06:00.0: reg 10 io port: [0xe800-0xe8ff] [ 0.924353] pci 0000:06:00.0: reg 18 64bit mmio: [0xfbeff000-0xfbefffff] [ 0.924365] pci 0000:06:00.0: reg 20 64bit mmio: [0xf6ef0000-0xf6efffff] [ 0.924372] pci 0000:06:00.0: reg 30 32bit mmio: [0xfbec0000-0xfbedffff] [ 0.924407] pci 0000:06:00.0: supports D1 D2 [ 0.924409] pci 0000:06:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.924414] pci 0000:06:00.0: PME# disabled [ 0.924464] pci 0000:00:1c.2: bridge io port: [0xe000-0xefff] [ 0.924467] pci 0000:00:1c.2: bridge 32bit mmio: [0xfbe00000-0xfbefffff] [ 0.924471] pci 0000:00:1c.2: bridge 64bit mmio pref: [0xf6e00000-0xf6efffff] [ 0.924517] pci 0000:05:00.0: reg 10 64bit mmio: [0xfbdff000-0xfbdff7ff] [ 0.924524] pci 0000:05:00.0: reg 18 io port: [0xd800-0xd8ff] [ 0.924577] pci 0000:05:00.0: supports D2 [ 0.924578] pci 0000:05:00.0: PME# supported from D2 D3hot D3cold [ 0.924583] pci 0000:05:00.0: PME# disabled [ 0.924626] pci 0000:00:1c.3: bridge io port: [0xd000-0xdfff] [ 0.924629] pci 0000:00:1c.3: bridge 32bit mmio: [0xfbd00000-0xfbdfffff] [ 0.924714] pci 0000:04:00.0: reg 24 32bit mmio: [0xfbcfe000-0xfbcfffff] [ 0.924722] pci 0000:04:00.0: reg 30 32bit mmio: [0xfbce0000-0xfbceffff] [ 0.924750] pci 0000:04:00.0: PME# supported from D3hot [ 0.924756] pci 0000:04:00.0: PME# disabled [ 0.924805] pci 0000:04:00.1: reg 10 io port: [0xcc00-0xcc07] [ 0.924813] pci 0000:04:00.1: reg 14 io port: [0xc880-0xc883] [ 0.924820] pci 0000:04:00.1: reg 18 io port: [0xc800-0xc807] [ 0.924828] pci 0000:04:00.1: reg 1c io port: [0xc480-0xc483] [ 0.924836] pci 0000:04:00.1: reg 20 io port: [0xc400-0xc40f] [ 0.924915] pci 0000:00:1c.4: bridge io port: [0xc000-0xcfff] [ 0.924918] pci 0000:00:1c.4: bridge 32bit mmio: [0xfbc00000-0xfbcfffff] [ 0.924961] pci 0000:00:1e.0: transparent bridge [ 0.924994] pci_bus 0000:00: on NUMA node 0 [ 0.924998] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.925222] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT] [ 0.925303] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT] [ 0.925348] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P6._PRT] [ 0.925391] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P7._PRT] [ 0.925433] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P8._PRT] [ 0.925489] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NPE1._PRT] [ 0.925532] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NPE3._PRT] [ 0.925574] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NPE7._PRT] [ 0.944092] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 6 7 10 11 12 14 *15) [ 0.944186] ACPI: PCI Interrupt Link [LNKB] (IRQs *5) [ 0.944275] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 6 7 10 *11 12 14 15) [ 0.944367] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 6 7 *10 11 12 14 15) [ 0.944459] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 6 7 10 11 12 *14 15) [ 0.944551] ACPI: PCI Interrupt Link [LNKF] (IRQs *3 4 6 7 10 11 12 14 15) [ 0.944643] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 6 *7 10 11 12 14 15) [ 0.944735] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 *4 6 7 10 11 12 14 15) [ 0.944857] SCSI subsystem initialized [ 0.944964] libata version 3.00 loaded. [ 0.945010] usbcore: registered new interface driver usbfs [ 0.945022] usbcore: registered new interface driver hub [ 0.945037] usbcore: registered new device driver usb [ 0.945115] ACPI: WMI: Mapper loaded [ 0.945118] PCI: Using ACPI for IRQ routing [ 0.953467] Bluetooth: Core ver 2.15 [ 0.953499] NET: Registered protocol family 31 [ 0.953503] Bluetooth: HCI device and connection manager initialized [ 0.953508] Bluetooth: HCI socket layer initialized [ 0.953512] NetLabel: Initializing [ 0.953515] NetLabel: domain hash size = 128 [ 0.953518] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.953532] NetLabel: unlabeled traffic allowed by default [ 0.953567] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0 [ 0.953571] hpet0: 4 comparators, 64-bit 14.318180 MHz counter [ 0.971863] Switched to high resolution mode on CPU 0 [ 0.973161] Switched to high resolution mode on CPU 3 [ 0.973166] Switched to high resolution mode on CPU 2 [ 0.973169] Switched to high resolution mode on CPU 1 [ 0.973460] Switched to high resolution mode on CPU 4 [ 0.973559] Switched to high resolution mode on CPU 6 [ 0.973564] Switched to high resolution mode on CPU 5 [ 0.973598] Switched to high resolution mode on CPU 7 [ 0.980826] pnp: PnP ACPI init [ 0.980837] ACPI: bus type pnp registered [ 0.982969] pnp: PnP ACPI: found 15 devices [ 0.982972] ACPI: ACPI bus type pnp unregistered [ 0.982975] PnPBIOS: Disabled by ACPI PNP [ 0.982982] system 00:01: iomem range 0xfbf00000-0xfbffffff has been reserved [ 0.982985] system 00:01: iomem range 0xfc000000-0xfcffffff has been reserved [ 0.982988] system 00:01: iomem range 0xfd000000-0xfdffffff has been reserved [ 0.982991] system 00:01: iomem range 0xfe000000-0xfebfffff has been reserved [ 0.982994] system 00:01: iomem range 0xfec8a000-0xfec8afff could not be reserved [ 0.982998] system 00:01: iomem range 0xfed10000-0xfed10fff has been reserved [ 0.983003] system 00:07: ioport range 0x290-0x29f has been reserved [ 0.983008] system 00:08: ioport range 0x4d0-0x4d1 has been reserved [ 0.983011] system 00:08: ioport range 0x800-0x87f has been reserved [ 0.983013] system 00:08: ioport range 0x500-0x57f could not be reserved [ 0.983017] system 00:08: iomem range 0xfed1c000-0xfed1ffff has been reserved [ 0.983020] system 00:08: iomem range 0xfed20000-0xfed3ffff has been reserved [ 0.983023] system 00:08: iomem range 0xfed40000-0xfed8ffff has been reserved [ 0.983028] system 00:0b: iomem range 0xffc00000-0xffdfffff has been reserved [ 0.983032] system 00:0c: iomem range 0xfec00000-0xfec00fff could not be reserved [ 0.983035] system 00:0c: iomem range 0xfee00000-0xfee00fff has been reserved [ 0.983040] system 00:0d: iomem range 0xe0000000-0xefffffff has been reserved [ 0.983044] system 00:0e: iomem range 0x0-0x9ffff could not be reserved [ 0.983047] system 00:0e: iomem range 0xc0000-0xcffff could not be reserved [ 0.983050] system 00:0e: iomem range 0xe0000-0xfffff could not be reserved [ 0.983053] system 00:0e: iomem range 0x100000-0xbfefffff could not be reserved [ 0.983056] system 00:0e: iomem range 0xfed90000-0xffffffff could not be reserved [ 1.017616] AppArmor: AppArmor Filesystem Enabled [ 1.017670] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01 [ 1.017673] pci 0000:00:01.0: IO window: disabled [ 1.017677] pci 0000:00:01.0: MEM window: disabled [ 1.017680] pci 0000:00:01.0: PREFETCH window: disabled [ 1.017684] pci 0000:00:03.0: PCI bridge, secondary bus 0000:02 [ 1.017687] pci 0000:00:03.0: IO window: 0xb000-0xbfff [ 1.017692] pci 0000:00:03.0: MEM window: 0xf8000000-0xfbbfffff [ 1.017696] pci 0000:00:03.0: PREFETCH window: 0x000000d0000000-0x000000dfffffff [ 1.017701] pci 0000:00:07.0: PCI bridge, secondary bus 0000:03 [ 1.017704] pci 0000:00:07.0: IO window: disabled [ 1.017708] pci 0000:00:07.0: MEM window: disabled [ 1.017711] pci 0000:00:07.0: PREFETCH window: disabled [ 1.017715] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:07 [ 1.017717] pci 0000:00:1c.0: IO window: disabled [ 1.017721] pci 0000:00:1c.0: MEM window: disabled [ 1.017725] pci 0000:00:1c.0: PREFETCH window: 0x000000f6f00000-0x000000f6ffffff [ 1.017731] pci 0000:00:1c.2: PCI bridge, secondary bus 0000:06 [ 1.017735] pci 0000:00:1c.2: IO window: 0xe000-0xefff [ 1.017739] pci 0000:00:1c.2: MEM window: 0xfbe00000-0xfbefffff [ 1.017744] pci 0000:00:1c.2: PREFETCH window: 0x000000f6e00000-0x000000f6efffff [ 1.017750] pci 0000:00:1c.3: PCI bridge, secondary bus 0000:05 [ 1.017753] pci 0000:00:1c.3: IO window: 0xd000-0xdfff [ 1.017758] pci 0000:00:1c.3: MEM window: 0xfbd00000-0xfbdfffff [ 1.017762] pci 0000:00:1c.3: PREFETCH window: disabled [ 1.017766] pci 0000:00:1c.4: PCI bridge, secondary bus 0000:04 [ 1.017769] pci 0000:00:1c.4: IO window: 0xc000-0xcfff [ 1.017774] pci 0000:00:1c.4: MEM window: 0xfbc00000-0xfbcfffff [ 1.017778] pci 0000:00:1c.4: PREFETCH window: disabled [ 1.017782] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:08 [ 1.017784] pci 0000:00:1e.0: IO window: disabled [ 1.017788] pci 0000:00:1e.0: MEM window: disabled [ 1.017792] pci 0000:00:1e.0: PREFETCH window: disabled [ 1.017801] pci 0000:00:01.0: setting latency timer to 64 [ 1.017806] pci 0000:00:03.0: setting latency timer to 64 [ 1.017811] pci 0000:00:07.0: setting latency timer to 64 [ 1.017817] alloc irq_desc for 17 on node -1 [ 1.017818] alloc kstat_irqs on node -1 [ 1.017822] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 1.017826] pci 0000:00:1c.0: setting latency timer to 64 [ 1.017831] alloc irq_desc for 18 on node -1 [ 1.017832] alloc kstat_irqs on node -1 [ 1.017834] pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 1.017839] pci 0000:00:1c.2: setting latency timer to 64 [ 1.017843] alloc irq_desc for 19 on node -1 [ 1.017844] alloc kstat_irqs on node -1 [ 1.017847] pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19 [ 1.017851] pci 0000:00:1c.3: setting latency timer to 64 [ 1.017856] pci 0000:00:1c.4: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 1.017860] pci 0000:00:1c.4: setting latency timer to 64 [ 1.017865] pci 0000:00:1e.0: setting latency timer to 64 [ 1.017868] pci_bus 0000:00: resource 0 io: [0x00-0xffff] [ 1.017869] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff] [ 1.017871] pci_bus 0000:02: resource 0 io: [0xb000-0xbfff] [ 1.017872] pci_bus 0000:02: resource 1 mem: [0xf8000000-0xfbbfffff] [ 1.017874] pci_bus 0000:02: resource 2 pref mem [0xd0000000-0xdfffffff] [ 1.017875] pci_bus 0000:07: resource 2 pref mem [0xf6f00000-0xf6ffffff] [ 1.017877] pci_bus 0000:06: resource 0 io: [0xe000-0xefff] [ 1.017878] pci_bus 0000:06: resource 1 mem: [0xfbe00000-0xfbefffff] [ 1.017880] pci_bus 0000:06: resource 2 pref mem [0xf6e00000-0xf6efffff] [ 1.017881] pci_bus 0000:05: resource 0 io: [0xd000-0xdfff] [ 1.017882] pci_bus 0000:05: resource 1 mem: [0xfbd00000-0xfbdfffff] [ 1.017884] pci_bus 0000:04: resource 0 io: [0xc000-0xcfff] [ 1.017885] pci_bus 0000:04: resource 1 mem: [0xfbc00000-0xfbcfffff] [ 1.017887] pci_bus 0000:08: resource 3 io: [0x00-0xffff] [ 1.017888] pci_bus 0000:08: resource 4 mem: [0x000000-0xffffffff] [ 1.017905] NET: Registered protocol family 2 [ 1.017957] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 1.018107] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 1.018301] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 1.018395] TCP: Hash tables configured (established 131072 bind 65536) [ 1.018398] TCP reno registered [ 1.018441] NET: Registered protocol family 1 [ 1.018470] Trying to unpack rootfs image as initramfs... [ 1.148363] Freeing initrd memory: 7956k freed [ 1.149810] cpufreq-nforce2: No nForce2 chipset. [ 1.149830] Scanning for low memory corruption every 60 seconds [ 1.149885] audit: initializing netlink socket (disabled) [ 1.149895] type=2000 audit(1257341696.980:1): initialized [ 1.155592] highmem bounce pool size: 64 pages [ 1.155597] HugeTLB registered 4 MB page size, pre-allocated 0 pages [ 1.156427] VFS: Disk quotas dquot_6.5.2 [ 1.156461] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 1.156772] fuse init (API version 7.12) [ 1.156818] msgmni has been set to 1679 [ 1.156985] alg: No test for stdrng (krng) [ 1.156993] io scheduler noop registered [ 1.156996] io scheduler anticipatory registered [ 1.156998] io scheduler deadline registered [ 1.157023] io scheduler cfq registered (default) [ 1.157143] pci 0000:02:00.0: Boot video device [ 1.157228] alloc irq_desc for 48 on node -1 [ 1.157230] alloc kstat_irqs on node -1 [ 1.157236] pcieport-driver 0000:00:01.0: irq 48 for MSI/MSI-X [ 1.157242] pcieport-driver 0000:00:01.0: setting latency timer to 64 [ 1.157324] alloc irq_desc for 49 on node -1 [ 1.157325] alloc kstat_irqs on node -1 [ 1.157330] pcieport-driver 0000:00:03.0: irq 49 for MSI/MSI-X [ 1.157335] pcieport-driver 0000:00:03.0: setting latency timer to 64 [ 1.157413] alloc irq_desc for 50 on node -1 [ 1.157414] alloc kstat_irqs on node -1 [ 1.157419] pcieport-driver 0000:00:07.0: irq 50 for MSI/MSI-X [ 1.157424] pcieport-driver 0000:00:07.0: setting latency timer to 64 [ 1.157501] alloc irq_desc for 51 on node -1 [ 1.157502] alloc kstat_irqs on node -1 [ 1.157507] pcieport-driver 0000:00:1c.0: irq 51 for MSI/MSI-X [ 1.157513] pcieport-driver 0000:00:1c.0: setting latency timer to 64 [ 1.157595] alloc irq_desc for 52 on node -1 [ 1.157596] alloc kstat_irqs on node -1 [ 1.157601] pcieport-driver 0000:00:1c.2: irq 52 for MSI/MSI-X [ 1.157607] pcieport-driver 0000:00:1c.2: setting latency timer to 64 [ 1.157693] alloc irq_desc for 53 on node -1 [ 1.157694] alloc kstat_irqs on node -1 [ 1.157699] pcieport-driver 0000:00:1c.3: irq 53 for MSI/MSI-X [ 1.157705] pcieport-driver 0000:00:1c.3: setting latency timer to 64 [ 1.157789] alloc irq_desc for 54 on node -1 [ 1.157790] alloc kstat_irqs on node -1 [ 1.157795] pcieport-driver 0000:00:1c.4: irq 54 for MSI/MSI-X [ 1.157801] pcieport-driver 0000:00:1c.4: setting latency timer to 64 [ 1.157860] aer 0000:00:01.0:pcie02: AER service couldn't init device: no _OSC support [ 1.157864] aer 0000:00:03.0:pcie02: AER service couldn't init device: no _OSC support [ 1.157867] aer 0000:00:07.0:pcie02: AER service couldn't init device: no _OSC support [ 1.157872] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 1.157954] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 1.158025] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0 [ 1.158029] ACPI: Power Button [PWRF] [ 1.158063] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1 [ 1.158066] ACPI: Power Button [PWRB] [ 1.158678] ACPI: SSDT bf698200 004C9 (v01 DpgPmm P001Ist 00000011 INTL 20060113) [ 1.161076] processor LNXCPU:00: registered as cooling_device0 [ 1.161433] ACPI: SSDT bf6986d0 004C9 (v01 DpgPmm P002Ist 00000012 INTL 20060113) [ 1.163701] processor LNXCPU:01: registered as cooling_device1 [ 1.164073] ACPI: SSDT bf698ba0 004C9 (v01 DpgPmm P003Ist 00000012 INTL 20060113) [ 1.166352] processor LNXCPU:02: registered as cooling_device2 [ 1.166719] ACPI: SSDT bf699070 004C9 (v01 DpgPmm P004Ist 00000012 INTL 20060113) [ 1.169000] processor LNXCPU:03: registered as cooling_device3 [ 1.169371] ACPI: SSDT bf699540 004C9 (v01 DpgPmm P005Ist 00000012 INTL 20060113) [ 1.171642] processor LNXCPU:04: registered as cooling_device4 [ 1.172009] ACPI: SSDT bf699a10 004C9 (v01 DpgPmm P006Ist 00000012 INTL 20060113) [ 1.174289] processor LNXCPU:05: registered as cooling_device5 [ 1.174649] ACPI: SSDT bf699ee0 004C9 (v01 DpgPmm P007Ist 00000012 INTL 20060113) [ 1.176940] processor LNXCPU:06: registered as cooling_device6 [ 1.177306] ACPI: SSDT bf69a3b0 004C9 (v01 DpgPmm P008Ist 00000012 INTL 20060113) [ 1.179582] processor LNXCPU:07: registered as cooling_device7 [ 1.181415] isapnp: Scanning for PnP cards... [ 1.534218] isapnp: No Plug & Play device found [ 1.534846] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.535587] brd: module loaded [ 1.535820] loop: module loaded [ 1.535859] input: Macintosh mouse button emulation as /devices/virtual/input/input2 [ 1.535900] ahci 0000:00:1f.2: version 3.0 [ 1.535910] alloc irq_desc for 20 on node -1 [ 1.535911] alloc kstat_irqs on node -1 [ 1.535916] ahci 0000:00:1f.2: PCI INT B -> GSI 20 (level, low) -> IRQ 20 [ 1.535937] alloc irq_desc for 55 on node -1 [ 1.535938] alloc kstat_irqs on node -1 [ 1.535944] ahci 0000:00:1f.2: irq 55 for MSI/MSI-X [ 1.535967] ahci: SSS flag set, parallel bus scan disabled [ 1.536004] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x3f impl SATA mode [ 1.536008] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pmp pio slum part ems [ 1.536013] ahci 0000:00:1f.2: setting latency timer to 64 [ 1.571561] scsi0 : ahci [ 1.571630] scsi1 : ahci [ 1.571662] scsi2 : ahci [ 1.571693] scsi3 : ahci [ 1.571724] scsi4 : ahci [ 1.571755] scsi5 : ahci [ 1.571830] ata1: SATA max UDMA/133 abar m2048@0xf7ffc000 port 0xf7ffc100 irq 55 [ 1.571834] ata2: SATA max UDMA/133 abar m2048@0xf7ffc000 port 0xf7ffc180 irq 55 [ 1.571837] ata3: SATA max UDMA/133 abar m2048@0xf7ffc000 port 0xf7ffc200 irq 55 [ 1.571841] ata4: SATA max UDMA/133 irq_stat 0x00400040, connection status changed irq 55 [ 1.571845] ata5: SATA max UDMA/133 abar m2048@0xf7ffc000 port 0xf7ffc300 irq 55 [ 1.571849] ata6: SATA max UDMA/133 irq_stat 0x00400040 , connection status changed [ 1.571869] alloc irq_desc for 16 on node -1 [ 1.571870] alloc kstat_irqs on node -1 [ 1.571875] ahci 0000:04:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 1.587541] ahci 0000:04:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SATA mode [ 1.587549] ahci 0000:04:00.0: flags: 64bit ncq pm led clo pmp pio slum part [ 1.587558] ahci 0000:04:00.0: setting latency timer to 64 [ 1.587647] scsi6 : ahci [ 1.587684] scsi7 : ahci [ 1.587725] ata7: SATA max UDMA/133 abar m8192@0xfbcfe000 port 0xfbcfe100 irq 16 [ 1.587730] ata8: SATA max UDMA/133 abar m8192@0xfbcfe000 port 0xfbcfe180 irq 16 [ 1.587962] pata_jmicron 0000:04:00.1: enabling device (0000 -> 0001) [ 1.587968] pata_jmicron 0000:04:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 1.587987] pata_jmicron 0000:04:00.1: setting latency timer to 64 [ 1.588029] scsi8 : pata_jmicron [ 1.588062] scsi9 : pata_jmicron [ 1.588543] ata9: PATA max UDMA/100 cmd 0xcc00 ctl 0xc880 bmdma 0xc400 irq 17 [ 1.588547] ata10: PATA max UDMA/100 cmd 0xc800 ctl 0xc480 bmdma 0xc408 irq 17 [ 1.588833] Fixed MDIO Bus: probed [ 1.588852] PPP generic driver version 2.4.2 [ 1.588895] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.588909] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 1.588917] ehci_hcd 0000:00:1a.7: setting latency timer to 64 [ 1.588920] ehci_hcd 0000:00:1a.7: EHCI Host Controller [ 1.588946] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1 [ 1.592854] ehci_hcd 0000:00:1a.7: debug port 1 [ 1.592859] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported [ 1.592866] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xf7fff000 [ 1.607506] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00 [ 1.607575] usb usb1: configuration #1 chosen from 1 choice [ 1.607595] hub 1-0:1.0: USB hub found [ 1.607600] hub 1-0:1.0: 6 ports detected [ 1.607640] alloc irq_desc for 23 on node -1 [ 1.607641] alloc kstat_irqs on node -1 [ 1.607644] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 1.607652] ehci_hcd 0000:00:1d.7: setting latency timer to 64 [ 1.607654] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 1.607672] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2 [ 1.611552] ehci_hcd 0000:00:1d.7: debug port 1 [ 1.611557] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported [ 1.611565] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf7ffe000 [ 1.623498] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 1.623558] usb usb2: configuration #1 chosen from 1 choice [ 1.623583] hub 2-0:1.0: USB hub found [ 1.623587] hub 2-0:1.0: 6 ports detected [ 1.623625] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.623635] uhci_hcd: USB Universal Host Controller Interface driver [ 1.623649] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 1.623655] uhci_hcd 0000:00:1a.0: setting latency timer to 64 [ 1.623657] uhci_hcd 0000:00:1a.0: UHCI Host Controller [ 1.623674] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3 [ 1.623695] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000a800 [ 1.623741] usb usb3: configuration #1 chosen from 1 choice [ 1.623756] hub 3-0:1.0: USB hub found [ 1.623760] hub 3-0:1.0: 2 ports detected [ 1.623788] alloc irq_desc for 21 on node -1 [ 1.623789] alloc kstat_irqs on node -1 [ 1.623792] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 [ 1.623797] uhci_hcd 0000:00:1a.1: setting latency timer to 64 [ 1.623799] uhci_hcd 0000:00:1a.1: UHCI Host Controller [ 1.623816] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4 [ 1.623840] uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000a880 [ 1.623881] usb usb4: configuration #1 chosen from 1 choice [ 1.623899] hub 4-0:1.0: USB hub found [ 1.623902] hub 4-0:1.0: 2 ports detected [ 1.623928] uhci_hcd 0000:00:1a.2: PCI INT D -> GSI 19 (level, low) -> IRQ 19 [ 1.623934] uhci_hcd 0000:00:1a.2: setting latency timer to 64 [ 1.623936] uhci_hcd 0000:00:1a.2: UHCI Host Controller [ 1.623951] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5 [ 1.623976] uhci_hcd 0000:00:1a.2: irq 19, io base 0x0000ac00 [ 1.624018] usb usb5: configuration #1 chosen from 1 choice [ 1.624033] hub 5-0:1.0: USB hub found [ 1.624037] hub 5-0:1.0: 2 ports detected [ 1.624064] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 1.624069] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [ 1.624072] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 1.624091] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6 [ 1.624112] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000a080 [ 1.624154] usb usb6: configuration #1 chosen from 1 choice [ 1.624169] hub 6-0:1.0: USB hub found [ 1.624172] hub 6-0:1.0: 2 ports detected [ 1.624199] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 1.624204] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [ 1.624206] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 1.624222] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7 [ 1.624243] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000a400 [ 1.624287] usb usb7: configuration #1 chosen from 1 choice [ 1.624304] hub 7-0:1.0: USB hub found [ 1.624308] hub 7-0:1.0: 2 ports detected [ 1.624334] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 1.624339] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [ 1.624341] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 1.624357] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8 [ 1.624378] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000a480 [ 1.624419] usb usb8: configuration #1 chosen from 1 choice [ 1.624433] hub 8-0:1.0: USB hub found [ 1.624437] hub 8-0:1.0: 2 ports detected [ 1.624491] PNP: No PS/2 controller found. Probing ports directly. [ 1.626945] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.626950] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 1.626981] mice: PS/2 mouse device common for all mice [ 1.627036] rtc_cmos 00:03: RTC can wake from S4 [ 1.627053] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0 [ 1.627074] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs [ 1.627131] device-mapper: uevent: version 1.0.3 [ 1.627182] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com [ 1.627289] device-mapper: multipath: version 1.1.0 loaded [ 1.627292] device-mapper: multipath round-robin: version 1.0.0 loaded [ 1.627356] EISA: Probing bus 0 at eisa.0 [ 1.627378] EISA: Detected 0 cards. [ 1.627533] cpuidle: using governor ladder [ 1.627535] cpuidle: using governor menu [ 1.627797] TCP cubic registered [ 1.627799] IPv6: Loaded, but administratively disabled, reboot required to enable [ 1.627803] NET: Registered protocol family 17 [ 1.627814] Bluetooth: L2CAP ver 2.13 [ 1.627816] Bluetooth: L2CAP socket layer initialized [ 1.627819] Bluetooth: SCO (Voice Link) ver 0.6 [ 1.627820] Bluetooth: SCO socket layer initialized [ 1.627836] Bluetooth: RFCOMM TTY layer initialized [ 1.627838] Bluetooth: RFCOMM socket layer initialized [ 1.627841] Bluetooth: RFCOMM ver 1.11 [ 1.631801] Using IPI No-Shortcut mode [ 1.631848] PM: Resume from disk failed. [ 1.631854] registered taskstats version 1 [ 1.631953] Magic number: 1:737:583 [ 1.631981] pci_bus 0000:04: hash matches [ 1.632019] rtc_cmos 00:03: setting system clock to 2009-11-04 13:34:58 UTC (1257341698) [ 1.632023] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 1.632025] EDD information not available. [ 1.891366] ata1: SATA link down (SStatus 0 SControl 300) [ 1.907397] ata8: SATA link down (SStatus 0 SControl 300) [ 2.031289] usb 1-6: new high speed USB device using ehci_hcd and address 3 [ 2.071278] ata7: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 2.071534] ata7.15: Port Multiplier 1.1, 0x1043:0x0322 r0, 5 ports, feat 0x5/0xf [ 2.071799] ata7.15: applying bridge limits [ 2.071844] ata7.00: hard resetting link [ 2.226426] usb 1-6: configuration #1 chosen from 1 choice [ 2.228445] ata2: SATA link down (SStatus 0 SControl 300) [ 2.335132] usb 2-3: new high speed USB device using ehci_hcd and address 2 [ 2.563022] ata3: SATA link down (SStatus 0 SControl 300) [ 2.575720] usb 2-3: configuration #1 chosen from 1 choice [ 2.982801] usb 4-1: new full speed USB device using uhci_hcd and address 2 [ 3.359100] usb 4-1: configuration #1 chosen from 1 choice [ 3.466560] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 3.467236] ata4.00: ATAPI: ATAPI iHAS324 A, BL1A, max UDMA/100, ATAPI AN [ 3.468260] ata4.00: configured for UDMA/100 [ 3.483463] scsi 3:0:0:0: CD-ROM ATAPI iHAS324 A BL1A PQ: 0 ANSI: 5 [ 3.488721] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray [ 3.488728] Uniform CD-ROM driver Revision: 3.20 [ 3.488812] sr 3:0:0:0: Attached scsi CD-ROM sr0 [ 3.488836] sr 3:0:0:0: Attached scsi generic sg0 type 5 [ 3.598489] usb 7-2: new low speed USB device using uhci_hcd and address 2 [ 3.773311] usb 7-2: configuration #1 chosen from 1 choice [ 3.806393] ata5: SATA link down (SStatus 0 SControl 300) [ 4.014274] usb 8-1: new low speed USB device using uhci_hcd and address 2 [ 4.196246] usb 8-1: configuration #1 chosen from 1 choice [ 4.494030] usb 8-2: new low speed USB device using uhci_hcd and address 3 [ 4.677022] usb 8-2: configuration #1 chosen from 1 choice [ 4.709928] ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 4.716245] ata6.00: ATA-7: SAMSUNG HD103UJ, 1AA01113, max UDMA7 [ 4.716252] ata6.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32) [ 4.722645] ata6.00: configured for UDMA/133 [ 4.737987] scsi 5:0:0:0: Direct-Access ATA SAMSUNG HD103UJ 1AA0 PQ: 0 ANSI: 5 [ 4.738052] sd 5:0:0:0: Attached scsi generic sg1 type 0 [ 4.738075] sd 5:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB) [ 4.738098] sd 5:0:0:0: [sda] Write Protect is off [ 4.738100] sd 5:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 4.738111] sd 5:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 4.738176] sda: sda1 [ 4.748652] sd 5:0:0:0: [sda] Attached SCSI disk [ 7.592447] ata7.00: link is slow to respond, please be patient (ready=0) [ 12.070163] ata7.00: softreset failed (device not ready) [ 15.068641] ata7.15: qc timeout (cmd 0xe4) [ 15.068656] ata7.00: failed to read SCR 0 (Emask=0x4) [ 15.068661] ata7.00: reset failed, giving up [ 15.068666] ata7.15: hard resetting link [ 15.552399] ata7.15: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 15.552652] ata7.00: hard resetting link [ 16.036359] ata7.00: SATA link up 3.0 Gbps (SStatus 123 SControl 320) [ 16.036398] ata7.01: hard resetting link [ 16.520110] ata7.01: SATA link up 3.0 Gbps (SStatus 123 SControl 320) [ 16.520147] ata7.02: hard resetting link [ 16.840089] ata7.02: SATA link down (SStatus 0 SControl 0) [ 16.840155] ata7.03: hard resetting link [ 17.159930] ata7.03: SATA link down (SStatus 0 SControl 0) [ 17.159996] ata7.04: hard resetting link [ 17.479767] ata7.04: SATA link down (SStatus 0 SControl 0) [ 17.480141] ata7.00: ATA-7: SAMSUNG HD103UJ, 0956, max UDMA/133 [ 17.480147] ata7.00: 1953525168 sectors, multi 1: LBA48 [ 17.480538] ata7.00: configured for UDMA/133 [ 17.486863] ata7.01: ATA-7: SAMSUNG HD103UJ, 1AA01113, max UDMA7 [ 17.486869] ata7.01: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32) [ 17.493289] ata7.01: configured for UDMA/133 [ 17.493687] ata7: EH complete [ 17.493750] scsi 6:0:0:0: Direct-Access ATA SAMSUNG HD103UJ 0956 PQ: 0 ANSI: 5 [ 17.493810] sd 6:0:0:0: Attached scsi generic sg2 type 0 [ 17.493821] sd 6:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB) [ 17.493844] sd 6:0:0:0: [sdb] Write Protect is off [ 17.493846] sd 6:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 17.493852] scsi 6:1:0:0: Direct-Access ATA SAMSUNG HD103UJ 1AA0 PQ: 0 ANSI: 5 [ 17.493857] sd 6:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA [ 17.493915] sd 6:1:0:0: Attached scsi generic sg3 type 0 [ 17.493918] sdb: [ 17.493940] sd 6:1:0:0: [sdc] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB) [ 17.493962] sd 6:1:0:0: [sdc] Write Protect is off [ 17.493965] sd 6:1:0:0: [sdc] Mode Sense: 00 3a 00 00 [ 17.493976] sd 6:1:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 17.494038] sdc: sdb1 sdb2 [ 17.504078] sd 6:0:0:0: [sdb] Attached SCSI disk [ 17.528698] sdc1 sdc2 [ 17.529051] sd 6:1:0:0: [sdc] Attached SCSI disk [ 17.658753] Freeing unused kernel memory: 540k freed [ 17.658875] Write protecting the kernel text: 4568k [ 17.658897] Write protecting the kernel read-only data: 1836k [ 17.718123] Floppy drive(s): fd0 is 1.44M [ 17.730703] usbcore: registered new interface driver hiddev [ 17.733302] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 17.733321] r8169 0000:06:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 17.733356] r8169 0000:06:00.0: setting latency timer to 64 [ 17.733397] alloc irq_desc for 56 on node -1 [ 17.733399] alloc kstat_irqs on node -1 [ 17.733412] r8169 0000:06:00.0: irq 56 for MSI/MSI-X [ 17.733624] eth0: RTL8168c/8111c at 0xf80f2000, 00:24:8c:54:3e:49, XID 3c4000c0 IRQ 56 [ 17.735519] ohci1394 0000:05:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19 [ 17.735526] ohci1394 0000:05:00.0: setting latency timer to 64 [ 17.738113] Initializing USB Mass Storage driver... [ 17.738183] scsi10 : SCSI emulation for USB Mass Storage devices [ 17.738250] usb-storage: device found at 3 [ 17.738251] usb-storage: waiting for device to settle before scanning [ 17.738270] usbcore: registered new interface driver usb-storage [ 17.738273] USB Mass Storage support registered. [ 17.739689] FDC 0 is a post-1991 82077 [ 17.744976] input: Microsoft Microsoft 5-Button Mouse with IntelliEye(TM) as /devices/pci0000:00/0000:00:1d.2/usb8/8-1/8-1:1.0/input/input3 [ 17.745022] generic-usb 0003:045E:0039.0001: input,hidraw0: USB HID v1.10 Mouse [Microsoft Microsoft 5-Button Mouse with IntelliEye(TM)] on usb-0000:00:1d.2-1/input0 [ 17.758977] input: Microsoft Microsoft® Digital Media Pro Keyboard as /devices/pci0000:00/0000:00:1d.2/usb8/8-2/8-2:1.0/input/input4 [ 17.759007] generic-usb 0003:045E:00B0.0002: input,hidraw1: USB HID v1.11 Keyboard [Microsoft Microsoft® Digital Media Pro Keyboard] on usb-0000:00:1d.2-2/input0 [ 17.790953] input: Microsoft Microsoft® Digital Media Pro Keyboard as /devices/pci0000:00/0000:00:1d.2/usb8/8-2/8-2:1.1/input/input5 [ 17.790982] generic-usb 0003:045E:00B0.0003: input,hidraw2: USB HID v1.11 Device [Microsoft Microsoft® Digital Media Pro Keyboard] on usb-0000:00:1d.2-2/input1 [ 17.790992] usbcore: registered new interface driver usbhid [ 17.790995] usbhid: v2.6:USB HID core driver [ 17.797267] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[19] MMIO=[fbdff000-fbdff7ff] Max Packet=[2048] IR/IT contexts=[4/8] [ 18.268282] vesafb: framebuffer at 0xf9000000, mapped to 0xf8800000, using 2560k, total 14336k [ 18.268288] vesafb: mode is 1280x1024x8, linelength=1280, pages=1 [ 18.268291] vesafb: protected mode interface info at c000:b810 [ 18.268293] vesafb: pmi: set display start = c00cb873, set palette = c00cb8ce [ 18.268296] vesafb: pmi: ports = 3b4 3b5 3ba 3c0 3c1 3c4 3c5 3c6 3c7 3c8 3c9 3cc 3ce 3cf 3d0 3d1 3d2 3d3 3d4 3d5 3da [ 18.268306] vesafb: scrolling: redraw [ 18.268308] vesafb: Pseudocolor: size=8:8:8:8, shift=0:0:0:0 [ 18.268335] fb0: VESA VGA frame buffer device [ 18.271103] Console: switching to colour frame buffer device 160x64 [ 18.480725] PM: Starting manual resume from disk [ 18.480963] PM: Resume from partition 8:33 [ 18.480964] PM: Checking hibernation image. [ 18.481083] PM: Resume from disk failed. [ 18.482941] EXT4-fs (dm-1): INFO: recovery required on readonly filesystem [ 18.483321] EXT4-fs (dm-1): write access will be enabled during recovery [ 18.494694] EXT4-fs (dm-1): barriers enabled [ 18.518862] kjournald2 starting: pid 557, dev dm-1:8, commit interval 5 seconds [ 18.518870] EXT4-fs (dm-1): delayed allocation enabled [ 18.518873] EXT4-fs: file extents enabled [ 18.519280] EXT4-fs: mballoc enabled [ 18.519286] EXT4-fs (dm-1): recovery complete [ 18.519501] EXT4-fs (dm-1): mounted filesystem with ordered data mode [ 18.914762] type=1505 audit(1257341715.791:2): operation="profile_load" pid=583 name=/usr/share/gdm/guest-session/Xsession [ 18.916934] type=1505 audit(1257341715.791:3): operation="profile_load" pid=584 name=/sbin/dhclient3 [ 18.917748] type=1505 audit(1257341715.791:4): operation="profile_load" pid=584 name=/usr/lib/NetworkManager/nm-dhcp-client.action [ 18.918538] type=1505 audit(1257341715.791:5): operation="profile_load" pid=584 name=/usr/lib/connman/scripts/dhclient-script [ 18.927779] type=1505 audit(1257341715.803:6): operation="profile_load" pid=585 name=/usr/bin/evince [ 18.933524] type=1505 audit(1257341715.807:7): operation="profile_load" pid=585 name=/usr/bin/evince-previewer [ 18.937191] type=1505 audit(1257341715.811:8): operation="profile_load" pid=585 name=/usr/bin/evince-thumbnailer [ 18.949424] type=1505 audit(1257341715.823:9): operation="profile_load" pid=587 name=/usr/bin/virt-aa-helper [ 18.979332] type=1505 audit(1257341715.855:10): operation="profile_load" pid=588 name=/usr/lib/cups/backend/cups-pdf [ 18.980276] type=1505 audit(1257341715.855:11): operation="profile_load" pid=588 name=/usr/sbin/cupsd [ 19.074708] ieee1394: Host added: ID:BUS[0-00:1023] GUID[001e8c0001cd9b45] [ 19.577023] Adding 2931820k swap on /dev/sdc1. Priority:-1 extents:1 across:2931820k [ 20.349147] udev: starting version 147 [ 21.330941] Linux agpgart interface v0.103 [ 21.475227] nvidia: module license 'NVIDIA' taints kernel. [ 21.475230] Disabling lock debugging due to kernel taint [ 21.725878] alloc irq_desc for 24 on node -1 [ 21.725880] alloc kstat_irqs on node -1 [ 21.725886] nvidia 0000:02:00.0: PCI INT A -> GSI 24 (level, low) -> IRQ 24 [ 21.725891] nvidia 0000:02:00.0: setting latency timer to 64 [ 21.726007] NVRM: loading NVIDIA UNIX x86 Kernel Module 185.18.36 Fri Aug 14 17:18:04 PDT 2009 [ 21.955673] lp: driver loaded but no devices found [ 22.058113] Bluetooth: Generic Bluetooth USB driver ver 0.5 [ 22.058190] usbcore: registered new interface driver btusb [ 22.132920] ip_tables: (C) 2000-2006 Netfilter Core Team [ 22.168548] Linux video capture interface: v2.00 [ 22.202022] alloc irq_desc for 22 on node -1 [ 22.202023] alloc kstat_irqs on node -1 [ 22.202028] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 [ 22.202053] alloc irq_desc for 57 on node -1 [ 22.202054] alloc kstat_irqs on node -1 [ 22.202061] HDA Intel 0000:00:1b.0: irq 57 for MSI/MSI-X [ 22.202073] HDA Intel 0000:00:1b.0: setting latency timer to 64 [ 22.305282] uvcvideo: Found UVC 1.00 device ViewSonic 1.3M, USB2.0 Webcam (04f2:b021) [ 22.308774] input: ViewSonic 1.3M, USB2.0 Webcam as /devices/pci0000:00/0000:00:1d.7/usb2/2-3/2-3:1.0/input/input6 [ 22.308814] usbcore: registered new interface driver uvcvideo [ 22.308817] USB Video Class driver (v0.1.0) [ 22.346381] coretemp coretemp.0: Using relative temperature scale! [ 22.346404] coretemp coretemp.1: Using relative temperature scale! [ 22.346433] coretemp coretemp.2: Using relative temperature scale! [ 22.346474] coretemp coretemp.3: Using relative temperature scale! [ 22.346502] coretemp coretemp.4: Using relative temperature scale! [ 22.346522] coretemp coretemp.5: Using relative temperature scale! [ 22.346546] coretemp coretemp.6: Using relative temperature scale! [ 22.346586] coretemp coretemp.7: Using relative temperature scale! [ 22.521077] w83627ehf: Found W83627DHG chip at 0x290 [ 22.521093] ACPI: I/O resource w83627ehf [0x295-0x296] conflicts with ACPI region HWRE [0x290-0x299] [ 22.536705] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 22.548173] r8169: eth0: link up [ 22.548176] r8169: eth0: link up [ 22.555435] w83627ehf: Found W83627DHG chip at 0x290 [ 22.555448] ACPI: I/O resource w83627ehf [0x295-0x296] conflicts with ACPI region HWRE [0x290-0x299] [ 22.570752] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 22.576395] hda_codec: ALC1200: BIOS auto-probing. [ 22.577801] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input7 [ 22.738907] usb-storage: device scan complete [ 22.742901] scsi 10:0:0:0: Direct-Access Y-E DATA USB HS-CF Card 4.08 PQ: 0 ANSI: 0 [ 22.746895] scsi 10:0:0:1: Direct-Access Y-E DATA USB HS-xD/SM 4.08 PQ: 0 ANSI: 0 [ 22.751616] scsi 10:0:0:2: Direct-Access Y-E DATA USB HS-MS Card 4.08 PQ: 0 ANSI: 0 [ 22.754894] scsi 10:0:0:3: Direct-Access Y-E DATA USB HS-SD Card 4.08 PQ: 0 ANSI: 0 [ 22.755112] sd 10:0:0:0: Attached scsi generic sg4 type 0 [ 22.755159] sd 10:0:0:1: Attached scsi generic sg5 type 0 [ 22.755204] sd 10:0:0:2: Attached scsi generic sg6 type 0 [ 22.755249] sd 10:0:0:3: Attached scsi generic sg7 type 0 [ 22.767060] EXT4-fs (dm-1): internal journal on dm-1:8 [ 22.819991] sd 10:0:0:3: [sdg] Attached SCSI removable disk [ 22.824112] sd 10:0:0:2: [sdf] Attached SCSI removable disk [ 22.849975] sd 10:0:0:1: [sde] Attached SCSI removable disk [ 22.857917] EXT4-fs (sdb1): barriers enabled [ 22.857971] sd 10:0:0:0: [sdd] Attached SCSI removable disk [ 22.865516] kjournald2 starting: pid 1189, dev sdb1:8, commit interval 5 seconds [ 22.865776] EXT4-fs (sdb1): internal journal on sdb1:8 [ 22.865780] EXT4-fs (sdb1): delayed allocation enabled [ 22.865783] EXT4-fs: file extents enabled [ 22.865879] EXT4-fs: mballoc enabled [ 22.865887] EXT4-fs (sdb1): mounted filesystem with ordered data mode [ 23.000959] EXT4-fs (dm-0): barriers enabled [ 23.017837] kjournald2 starting: pid 1193, dev dm-0:8, commit interval 5 seconds [ 23.018012] EXT4-fs (dm-0): internal journal on dm-0:8 [ 23.018016] EXT4-fs (dm-0): delayed allocation enabled [ 23.018020] EXT4-fs: file extents enabled [ 23.019161] EXT4-fs: mballoc enabled [ 23.019170] EXT4-fs (dm-0): mounted filesystem with ordered data mode [ 24.498275] EXT4-fs (dm-2): barriers enabled [ 24.499276] kjournald2 starting: pid 1234, dev dm-2:8, commit interval 5 seconds [ 24.499394] EXT4-fs (dm-2): internal journal on dm-2:8 [ 24.499396] EXT4-fs (dm-2): delayed allocation enabled [ 24.499397] EXT4-fs: file extents enabled [ 24.501431] EXT4-fs: mballoc enabled [ 24.501438] EXT4-fs (dm-2): mounted filesystem with ordered data mode [ 28.479661] EXT4-fs (dm-3): barriers enabled [ 28.480637] kjournald2 starting: pid 1271, dev dm-3:8, commit interval 5 seconds [ 28.480785] EXT4-fs (dm-3): internal journal on dm-3:8 [ 28.480789] EXT4-fs (dm-3): delayed allocation enabled [ 28.480793] EXT4-fs: file extents enabled [ 28.480834] EXT4-fs: mballoc enabled [ 28.480848] EXT4-fs (dm-3): mounted filesystem with ordered data mode [ 29.618315] EXT4-fs (dm-4): barriers enabled [ 29.620369] kjournald2 starting: pid 1308, dev dm-4:8, commit interval 5 seconds [ 29.620586] EXT4-fs (dm-4): internal journal on dm-4:8 [ 29.620590] EXT4-fs (dm-4): delayed allocation enabled [ 29.620593] EXT4-fs: file extents enabled [ 29.621076] EXT4-fs: mballoc enabled [ 29.621084] EXT4-fs (dm-4): mounted filesystem with ordered data mode [ 29.806855] EXT4-fs (dm-5): barriers enabled [ 29.817625] kjournald2 starting: pid 1315, dev dm-5:8, commit interval 5 seconds [ 29.817769] EXT4-fs (dm-5): internal journal on dm-5:8 [ 29.817773] EXT4-fs (dm-5): delayed allocation enabled [ 29.817776] EXT4-fs: file extents enabled [ 29.818031] EXT4-fs: mballoc enabled [ 29.818038] EXT4-fs (dm-5): mounted filesystem with ordered data mode [ 33.310042] kjournald starting. Commit interval 5 seconds [ 33.310051] EXT3-fs warning: maximal mount count reached, running e2fsck is recommended [ 33.316507] EXT3 FS on sda1, internal journal [ 33.316510] EXT3-fs: recovery complete. [ 33.319721] EXT3-fs: mounted filesystem with writeback data mode. [ 38.692684] EXT4-fs (dm-6): barriers enabled [ 38.710627] kjournald2 starting: pid 1364, dev dm-6:8, commit interval 5 seconds [ 38.770546] EXT4-fs (dm-6): internal journal on dm-6:8 [ 38.770550] EXT4-fs (dm-6): delayed allocation enabled [ 38.770553] EXT4-fs: file extents enabled [ 38.771183] EXT4-fs: mballoc enabled [ 38.771192] EXT4-fs (dm-6): mounted filesystem with ordered data mode [ 39.973882] __ratelimit: 9 callbacks suppressed [ 39.973883] type=1505 audit(1257341736.859:15): operation="profile_replace" pid=1412 name=/usr/share/gdm/guest-session/Xsession [ 39.974766] type=1505 audit(1257341736.859:16): operation="profile_replace" pid=1413 name=/sbin/dhclient3 [ 39.975110] type=1505 audit(1257341736.859:17): operation="profile_replace" pid=1413 name=/usr/lib/NetworkManager/nm-dhcp-client.action [ 39.975299] type=1505 audit(1257341736.859:18): operation="profile_replace" pid=1413 name=/usr/lib/connman/scripts/dhclient-script [ 39.976981] type=1505 audit(1257341736.863:19): operation="profile_replace" pid=1414 name=/usr/bin/evince [ 39.982254] type=1505 audit(1257341736.867:20): operation="profile_replace" pid=1414 name=/usr/bin/evince-previewer [ 39.985399] type=1505 audit(1257341736.871:21): operation="profile_replace" pid=1414 name=/usr/bin/evince-thumbnailer [ 39.989726] type=1505 audit(1257341736.875:22): operation="profile_replace" pid=1416 name=/usr/bin/virt-aa-helper [ 39.990588] type=1505 audit(1257341736.875:23): operation="profile_replace" pid=1417 name=/usr/lib/cups/backend/cups-pdf [ 39.990992] type=1505 audit(1257341736.875:24): operation="profile_replace" pid=1417 name=/usr/sbin/cupsd [ 44.271283] microcode: CPU0 sig=0x106a5, pf=0x2, revision=0x11 [ 44.271287] platform microcode: firmware: requesting intel-ucode/06-1a-05 [ 44.331477] microcode: CPU1 sig=0x106a5, pf=0x2, revision=0x11 [ 44.331480] platform microcode: firmware: requesting intel-ucode/06-1a-05 [ 44.332859] microcode: CPU2 sig=0x106a5, pf=0x2, revision=0x11 [ 44.332862] platform microcode: firmware: requesting intel-ucode/06-1a-05 [ 44.334327] microcode: CPU3 sig=0x106a5, pf=0x2, revision=0x11 [ 44.334330] platform microcode: firmware: requesting intel-ucode/06-1a-05 [ 44.335690] microcode: CPU4 sig=0x106a5, pf=0x2, revision=0x11 [ 44.335693] platform microcode: firmware: requesting intel-ucode/06-1a-05 [ 44.337039] microcode: CPU5 sig=0x106a5, pf=0x2, revision=0x11 [ 44.337041] platform microcode: firmware: requesting intel-ucode/06-1a-05 [ 44.338596] microcode: CPU6 sig=0x106a5, pf=0x2, revision=0x11 [ 44.338599] platform microcode: firmware: requesting intel-ucode/06-1a-05 [ 44.340007] microcode: CPU7 sig=0x106a5, pf=0x2, revision=0x11 [ 44.340010] platform microcode: firmware: requesting intel-ucode/06-1a-05 [ 44.341401] Microcode Update Driver: v2.00 , Peter Oruba