[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.31-14-generic (buildd@rothera) (gcc version 4.4.1 (Ubuntu 4.4.1-4ubuntu8) ) #48-Ubuntu SMP Fri Oct 16 14:04:26 UTC 2009 (Ubuntu 2.6.31-14.48-generic) [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] NSC Geode by NSC [ 0.000000] Cyrix CyrixInstead [ 0.000000] Centaur CentaurHauls [ 0.000000] Transmeta GenuineTMx86 [ 0.000000] Transmeta TransmetaCPU [ 0.000000] UMC UMC UMC UMC [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f000 (usable) [ 0.000000] BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000d2000 - 00000000000d4000 (reserved) [ 0.000000] BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000002fed0000 (usable) [ 0.000000] BIOS-e820: 000000002fed0000 - 000000002fee5000 (ACPI data) [ 0.000000] BIOS-e820: 000000002fee5000 - 000000002ff00000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000002ff00000 - 0000000030000000 (reserved) [ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) [ 0.000000] BIOS-e820: 00000000f0008000 - 00000000f000c000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) [ 0.000000] BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved) [ 0.000000] BIOS-e820: 00000000fed20000 - 00000000fed90000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved) [ 0.000000] DMI present. [ 0.000000] last_pfn = 0x2fed0 max_arch_pfn = 0x100000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-CFFFF write-protect [ 0.000000] D0000-DBFFF uncachable [ 0.000000] DC000-DFFFF write-back [ 0.000000] E0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000 mask FE0000000 write-back [ 0.000000] 1 base 020000000 mask FF0000000 write-back [ 0.000000] 2 base 02FF00000 mask FFFF00000 uncachable [ 0.000000] 3 disabled [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] PAT not supported by CPU. [ 0.000000] e820 update range: 0000000000002000 - 0000000000006000 (usable) ==> (reserved) [ 0.000000] Scanning 1 areas for low memory corruption [ 0.000000] modified physical RAM map: [ 0.000000] modified: 0000000000000000 - 0000000000002000 (usable) [ 0.000000] modified: 0000000000002000 - 0000000000006000 (reserved) [ 0.000000] modified: 0000000000006000 - 000000000009f000 (usable) [ 0.000000] modified: 000000000009f000 - 00000000000a0000 (reserved) [ 0.000000] modified: 00000000000d2000 - 00000000000d4000 (reserved) [ 0.000000] modified: 00000000000dc000 - 0000000000100000 (reserved) [ 0.000000] modified: 0000000000100000 - 000000002fed0000 (usable) [ 0.000000] modified: 000000002fed0000 - 000000002fee5000 (ACPI data) [ 0.000000] modified: 000000002fee5000 - 000000002ff00000 (ACPI NVS) [ 0.000000] modified: 000000002ff00000 - 0000000030000000 (reserved) [ 0.000000] modified: 00000000e0000000 - 00000000f0000000 (reserved) [ 0.000000] modified: 00000000f0008000 - 00000000f000c000 (reserved) [ 0.000000] modified: 00000000fec00000 - 00000000fec10000 (reserved) [ 0.000000] modified: 00000000fed14000 - 00000000fed1a000 (reserved) [ 0.000000] modified: 00000000fed20000 - 00000000fed90000 (reserved) [ 0.000000] modified: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] modified: 00000000ff000000 - 0000000100000000 (reserved) [ 0.000000] initial memory mapped : 0 - 00c00000 [ 0.000000] init_memory_mapping: 0000000000000000-000000002fed0000 [ 0.000000] Using x86 segment limits to approximate NX protection [ 0.000000] 0000000000 - 0000400000 page 4k [ 0.000000] 0000400000 - 002fc00000 page 2M [ 0.000000] 002fc00000 - 002fed0000 page 4k [ 0.000000] kernel direct mapping tables up to 2fed0000 @ 7000-c000 [ 0.000000] RAMDISK: 2f922000 - 2fe9f098 [ 0.000000] ACPI: RSDP 000f6c00 00024 (v02 IBM ) [ 0.000000] ACPI: XSDT 2fed6fe7 0005C (v01 IBM TP-1Y 00001290 LTP 00000000) [ 0.000000] ACPI: FACP 2fed7100 000F4 (v03 IBM TP-1Y 00001290 IBM 00000001) [ 0.000000] ACPI Warning: 32/64X length mismatch in Gpe1Block: 0/32 20090521 tbfadt-527 [ 0.000000] ACPI Warning: Optional field Gpe1Block has zero address or length: 000000000000102C/0 20090521 tbfadt-558 [ 0.000000] ACPI: DSDT 2fed72e7 0DB15 (v01 IBM TP-1Y 00001290 MSFT 0100000E) [ 0.000000] ACPI: FACS 2fef6000 00040 [ 0.000000] ACPI: SSDT 2fed72b4 00033 (v01 IBM TP-1Y 00001290 MSFT 0100000E) [ 0.000000] ACPI: ECDT 2fee4dfc 00052 (v01 IBM TP-1Y 00001290 IBM 00000001) [ 0.000000] ACPI: TCPA 2fee4e4e 00032 (v01 IBM TP-1Y 00001290 PTL 00000001) [ 0.000000] ACPI: APIC 2fee4e80 0005A (v01 IBM TP-1Y 00001290 IBM 00000001) [ 0.000000] ACPI: MCFG 2fee4eda 0003C (v01 IBM TP-1Y 00001290 IBM 00000001) [ 0.000000] ACPI: BOOT 2fee4fd8 00028 (v01 IBM TP-1Y 00001290 LTP 00000001) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] 0MB HIGHMEM available. [ 0.000000] 766MB LOWMEM available. [ 0.000000] mapped low ram: 0 - 2fed0000 [ 0.000000] low ram: 0 - 2fed0000 [ 0.000000] node 0 low ram: 00000000 - 2fed0000 [ 0.000000] node 0 bootmap 00008000 - 0000dfdc [ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 002fed0000] [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] [ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000] [ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000] [ 0.000000] #3 [0000100000 - 00008a80a0] TEXT DATA BSS ==> [0000100000 - 00008a80a0] [ 0.000000] #4 [002f922000 - 002fe9f098] RAMDISK ==> [002f922000 - 002fe9f098] [ 0.000000] #5 [000009f000 - 0000100000] BIOS reserved ==> [000009f000 - 0000100000] [ 0.000000] #6 [00008a9000 - 00008ac15c] BRK ==> [00008a9000 - 00008ac15c] [ 0.000000] #7 [0000007000 - 0000008000] PGTABLE ==> [0000007000 - 0000008000] [ 0.000000] #8 [0000008000 - 000000e000] BOOTMAP ==> [0000008000 - 000000e000] [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000000 -> 0x00001000 [ 0.000000] Normal 0x00001000 -> 0x0002fed0 [ 0.000000] HighMem 0x0002fed0 -> 0x0002fed0 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[3] active PFN ranges [ 0.000000] 0: 0x00000000 -> 0x00000002 [ 0.000000] 0: 0x00000006 -> 0x0000009f [ 0.000000] 0: 0x00000100 -> 0x0002fed0 [ 0.000000] On node 0 totalpages: 196203 [ 0.000000] free_area_init_node: node 0, pgdat c0784900, node_mem_map c1000000 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 3963 pages, LIFO batch:0 [ 0.000000] Normal zone: 1502 pages used for memmap [ 0.000000] Normal zone: 190706 pages, LIFO batch:31 [ 0.000000] Using APIC driver default [ 0.000000] ACPI: PM-Timer IO Port: 0x1008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] SMP: Allowing 1 CPUs, 0 hotplug CPUs [ 0.000000] nr_irqs_gsi: 24 [ 0.000000] PM: Registered nosave memory: 0000000000002000 - 0000000000006000 [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000d2000 [ 0.000000] PM: Registered nosave memory: 00000000000d2000 - 00000000000d4000 [ 0.000000] PM: Registered nosave memory: 00000000000d4000 - 00000000000dc000 [ 0.000000] PM: Registered nosave memory: 00000000000dc000 - 0000000000100000 [ 0.000000] Allocating PCI resources starting at 30000000 (gap: 30000000:b0000000) [ 0.000000] NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:1 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 14 pages at c1604000, static data 35612 bytes [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 194669 [ 0.000000] Kernel command line: BOOT_IMAGE=/casper/vmlinuz file=/cdrom/preseed/ubuntu.seed boot=casper initrd=/casper/initrd.lz quiet splash -- [ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Enabling fast FPU save and restore... done. [ 0.000000] Enabling unmasked SIMD FPU exception support... done. [ 0.000000] Initializing CPU#0 [ 0.000000] allocated 3926080 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] Initializing HighMem for node 0 (00000000:00000000) [ 0.000000] Memory: 760340k/785216k available (4565k kernel code, 24356k reserved, 2143k data, 540k init, 0k highmem) [ 0.000000] virtual kernel memory layout: [ 0.000000] fixmap : 0xfff1d000 - 0xfffff000 ( 904 kB) [ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB) [ 0.000000] vmalloc : 0xf06d0000 - 0xff7fe000 ( 241 MB) [ 0.000000] lowmem : 0xc0000000 - 0xefed0000 ( 766 MB) [ 0.000000] .init : 0xc078e000 - 0xc0815000 ( 540 kB) [ 0.000000] .data : 0xc0575554 - 0xc078d308 (2143 kB) [ 0.000000] .text : 0xc0100000 - 0xc0575554 (4565 kB) [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.000000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.000000] NR_IRQS:2304 nr_irqs:256 [ 0.000000] Extended CMOS year: 2000 [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 1862.130 MHz processor. [ 0.001160] Console: colour VGA+ 80x25 [ 0.001163] console [tty0] enabled [ 0.004009] Calibrating delay loop (skipped), value calculated using timer frequency.. 3724.26 BogoMIPS (lpj=7448520) [ 0.004029] Security Framework initialized [ 0.004052] AppArmor: AppArmor initialized [ 0.004059] Mount-cache hash table entries: 512 [ 0.004181] Initializing cgroup subsys ns [ 0.004186] Initializing cgroup subsys cpuacct [ 0.004190] Initializing cgroup subsys memory [ 0.004199] Initializing cgroup subsys freezer [ 0.004201] Initializing cgroup subsys net_cls [ 0.004217] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.004220] CPU: L2 cache: 2048K [ 0.004224] mce: CPU supports 5 MCE banks [ 0.004232] CPU0: Thermal monitoring enabled (TM1) [ 0.004240] Performance Counters: p6 PMU driver. [ 0.004250] ... version: 0 [ 0.004252] ... bit width: 32 [ 0.004254] ... generic counters: 2 [ 0.004256] ... value mask: 00000000ffffffff [ 0.004258] ... max period: 000000007fffffff [ 0.004260] ... fixed-purpose counters: 0 [ 0.004262] ... counter mask: 0000000000000003 [ 0.004266] Checking 'hlt' instruction... OK. [ 0.020782] SMP alternatives: switching to UP code [ 0.027158] Freeing SMP alternatives: 19k freed [ 0.027165] ACPI: Core revision 20090521 [ 0.048422] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.091185] CPU0: Intel(R) Pentium(R) M processor 1.86GHz stepping 08 [ 0.092001] Brought up 1 CPUs [ 0.092001] Total of 1 processors activated (3724.26 BogoMIPS). [ 0.092001] CPU0 attaching NULL sched-domain. [ 0.092001] Booting paravirtualized kernel on bare hardware [ 0.092001] regulator: core version 0.5 [ 0.092001] Time: 22:30:59 Date: 11/03/09 [ 0.092001] NET: Registered protocol family 16 [ 0.092001] EISA bus registered [ 0.092001] ACPI: bus type pci registered [ 0.092001] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255 [ 0.092001] PCI: MCFG area at e0000000 reserved in E820 [ 0.092001] PCI: Using MMCONFIG for extended config space [ 0.092001] PCI: Using configuration type 1 for base access [ 0.092001] bio: create slab at 0 [ 0.092001] ACPI: EC: EC description table is found, configuring boot EC [ 0.099367] ACPI: EC: non-query interrupt received, switching to interrupt mode [ 0.112125] ACPI: Interpreter enabled [ 0.112130] ACPI: (supports S0 S3 S4 S5) [ 0.112154] ACPI: Using IOAPIC for interrupt routing [ 0.124581] ACPI: EC: GPE = 0x1c, I/O: command/status = 0x66, data = 0x62 [ 0.124584] ACPI: EC: driver started in interrupt mode [ 0.124627] ACPI: Power Resource [PUBS] (on) [ 0.129098] ACPI: ACPI Dock Station Driver: 3 docks/bays found [ 0.129122] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 0.129221] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold [ 0.129225] pci 0000:00:01.0: PME# disabled [ 0.129332] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.129337] pci 0000:00:1c.0: PME# disabled [ 0.129421] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold [ 0.129426] pci 0000:00:1c.2: PME# disabled [ 0.129489] pci 0000:00:1d.0: reg 20 io port: [0x1800-0x181f] [ 0.129550] pci 0000:00:1d.1: reg 20 io port: [0x1820-0x183f] [ 0.129611] pci 0000:00:1d.2: reg 20 io port: [0x1840-0x185f] [ 0.129672] pci 0000:00:1d.3: reg 20 io port: [0x1860-0x187f] [ 0.129736] pci 0000:00:1d.7: reg 10 32bit mmio: [0xb0000000-0xb00003ff] [ 0.129795] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold [ 0.129801] pci 0000:00:1d.7: PME# disabled [ 0.129902] pci 0000:00:1e.2: reg 10 io port: [0x1c00-0x1cff] [ 0.129910] pci 0000:00:1e.2: reg 14 io port: [0x1880-0x18bf] [ 0.129918] pci 0000:00:1e.2: reg 18 32bit mmio: [0xb0000800-0xb00009ff] [ 0.129926] pci 0000:00:1e.2: reg 1c 32bit mmio: [0xb0000400-0xb00004ff] [ 0.129964] pci 0000:00:1e.2: PME# supported from D0 D3hot D3cold [ 0.129969] pci 0000:00:1e.2: PME# disabled [ 0.130006] pci 0000:00:1e.3: reg 10 io port: [0x2400-0x24ff] [ 0.130014] pci 0000:00:1e.3: reg 14 io port: [0x2000-0x207f] [ 0.130062] pci 0000:00:1e.3: PME# supported from D0 D3hot D3cold [ 0.130066] pci 0000:00:1e.3: PME# disabled [ 0.130154] pci 0000:00:1f.0: Force enabled HPET at 0xfed00000 [ 0.130161] pci 0000:00:1f.0: quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO [ 0.130166] pci 0000:00:1f.0: quirk: region 1180-11bf claimed by ICH6 GPIO [ 0.130170] pci 0000:00:1f.0: LPC Generic IO decode 1 PIO at 1600-167f [ 0.130175] pci 0000:00:1f.0: LPC Generic IO decode 2 PIO at 15e0-15ef [ 0.130215] pci 0000:00:1f.2: reg 10 io port: [0x00-0x07] [ 0.130223] pci 0000:00:1f.2: reg 14 io port: [0x00-0x03] [ 0.130231] pci 0000:00:1f.2: reg 18 io port: [0x00-0x07] [ 0.130239] pci 0000:00:1f.2: reg 1c io port: [0x00-0x03] [ 0.130247] pci 0000:00:1f.2: reg 20 io port: [0x18c0-0x18cf] [ 0.130281] pci 0000:00:1f.2: PME# supported from D3hot [ 0.130285] pci 0000:00:1f.2: PME# disabled [ 0.130346] pci 0000:00:1f.3: reg 20 io port: [0x18e0-0x18ff] [ 0.130404] pci 0000:01:00.0: reg 10 32bit mmio: [0xc0000000-0xc7ffffff] [ 0.130411] pci 0000:01:00.0: reg 14 io port: [0x3000-0x30ff] [ 0.130417] pci 0000:01:00.0: reg 18 32bit mmio: [0xb0100000-0xb010ffff] [ 0.130433] pci 0000:01:00.0: reg 30 32bit mmio: [0x000000-0x01ffff] [ 0.130450] pci 0000:01:00.0: supports D1 D2 [ 0.130503] pci 0000:00:01.0: bridge io port: [0x3000-0x3fff] [ 0.130507] pci 0000:00:01.0: bridge 32bit mmio: [0xb0100000-0xb01fffff] [ 0.130511] pci 0000:00:01.0: bridge 32bit mmio pref: [0xc0000000-0xc7ffffff] [ 0.130587] pci 0000:02:00.0: reg 10 64bit mmio: [0xb0200000-0xb020ffff] [ 0.130679] pci 0000:02:00.0: PME# supported from D3hot D3cold [ 0.130686] pci 0000:02:00.0: PME# disabled [ 0.130752] pci 0000:00:1c.0: bridge 32bit mmio: [0xb0200000-0xb02fffff] [ 0.130812] pci 0000:00:1c.2: bridge io port: [0x4000-0x4fff] [ 0.132005] pci 0000:00:1c.2: bridge 32bit mmio: [0xb2000000-0xb3ffffff] [ 0.132014] pci 0000:00:1c.2: bridge 64bit mmio pref: [0xc8000000-0xc80fffff] [ 0.132064] pci 0000:0b:00.0: reg 10 32bit mmio: [0xb4010000-0xb4010fff] [ 0.132092] pci 0000:0b:00.0: supports D1 D2 [ 0.132094] pci 0000:0b:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.132100] pci 0000:0b:00.0: PME# disabled [ 0.132165] pci 0000:0b:02.0: reg 10 32bit mmio: [0xb4000000-0xb400ffff] [ 0.132299] pci 0000:00:1e.0: transparent bridge [ 0.132304] pci 0000:00:1e.0: bridge io port: [0x5000-0x8fff] [ 0.132309] pci 0000:00:1e.0: bridge 32bit mmio: [0xb4000000-0xbfffffff] [ 0.132317] pci 0000:00:1e.0: bridge 64bit mmio pref: [0xd0000000-0xd7ffffff] [ 0.132362] pci_bus 0000:00: on NUMA node 0 [ 0.132367] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.132486] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT] [ 0.132554] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP0._PRT] [ 0.132626] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP2._PRT] [ 0.132703] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT] [ 0.136562] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11) [ 0.136756] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11) [ 0.136947] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11) [ 0.137138] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11) [ 0.137328] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11) [ 0.137519] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 *11) [ 0.137710] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 *11) [ 0.137901] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 *11) [ 0.138110] SCSI subsystem initialized [ 0.138150] libata version 3.00 loaded. [ 0.138226] usbcore: registered new interface driver usbfs [ 0.138242] usbcore: registered new interface driver hub [ 0.138267] usbcore: registered new device driver usb [ 0.138389] ACPI: WMI: Mapper loaded [ 0.138391] PCI: Using ACPI for IRQ routing [ 0.138470] Expanded resource reserved due to conflict with Adapter ROM [ 0.138555] Bluetooth: Core ver 2.15 [ 0.138580] NET: Registered protocol family 31 [ 0.138582] Bluetooth: HCI device and connection manager initialized [ 0.138585] Bluetooth: HCI socket layer initialized [ 0.138588] NetLabel: Initializing [ 0.138590] NetLabel: domain hash size = 128 [ 0.138591] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.138605] NetLabel: unlabeled traffic allowed by default [ 0.138753] hpet clockevent registered [ 0.138757] HPET: 3 timers in total, 0 timers will be used for per-cpu timer [ 0.138764] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 0.138769] hpet0: 3 comparators, 64-bit 14.318180 MHz counter [ 0.145707] pnp: PnP ACPI init [ 0.145721] ACPI: bus type pnp registered [ 0.149721] pnp: PnP ACPI: found 14 devices [ 0.149724] ACPI: ACPI bus type pnp unregistered [ 0.149727] PnPBIOS: Disabled by ACPI PNP [ 0.149739] system 00:00: iomem range 0x0-0x9ffff could not be reserved [ 0.149743] system 00:00: iomem range 0xc0000-0xc3fff could not be reserved [ 0.149746] system 00:00: iomem range 0xc4000-0xc7fff could not be reserved [ 0.149749] system 00:00: iomem range 0xc8000-0xcbfff could not be reserved [ 0.149753] system 00:00: iomem range 0xcc000-0xcffff could not be reserved [ 0.149756] system 00:00: iomem range 0xd0000-0xd3fff could not be reserved [ 0.149760] system 00:00: iomem range 0xdc000-0xdffff could not be reserved [ 0.149763] system 00:00: iomem range 0xe0000-0xe3fff could not be reserved [ 0.149766] system 00:00: iomem range 0xe4000-0xe7fff could not be reserved [ 0.149770] system 00:00: iomem range 0xe8000-0xebfff could not be reserved [ 0.149773] system 00:00: iomem range 0xec000-0xeffff could not be reserved [ 0.149777] system 00:00: iomem range 0xf0000-0xfffff could not be reserved [ 0.149780] system 00:00: iomem range 0x100000-0x2fffffff could not be reserved [ 0.149784] system 00:00: iomem range 0xfec00000-0xffffffff could not be reserved [ 0.149792] system 00:02: ioport range 0x1000-0x107f has been reserved [ 0.149795] system 00:02: ioport range 0x1180-0x11bf has been reserved [ 0.149798] system 00:02: ioport range 0x15e0-0x15ef has been reserved [ 0.149802] system 00:02: ioport range 0x1600-0x1641 has been reserved [ 0.149805] system 00:02: ioport range 0x1644-0x167f has been reserved [ 0.149809] system 00:02: iomem range 0xe0000000-0xefffffff has been reserved [ 0.149812] system 00:02: iomem range 0xf0008000-0xf000bfff has been reserved [ 0.149816] system 00:02: iomem range 0xfed14000-0xfed17fff has been reserved [ 0.149819] system 00:02: iomem range 0xfed18000-0xfed18fff has been reserved [ 0.149823] system 00:02: iomem range 0xfed19000-0xfed19fff has been reserved [ 0.184490] AppArmor: AppArmor Filesystem Enabled [ 0.184538] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01 [ 0.184542] pci 0000:00:01.0: IO window: 0x3000-0x3fff [ 0.184546] pci 0000:00:01.0: MEM window: 0xb0100000-0xb01fffff [ 0.184550] pci 0000:00:01.0: PREFETCH window: 0xc0000000-0xc7ffffff [ 0.184554] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:02 [ 0.184556] pci 0000:00:1c.0: IO window: disabled [ 0.184563] pci 0000:00:1c.0: MEM window: 0xb0200000-0xb02fffff [ 0.184568] pci 0000:00:1c.0: PREFETCH window: disabled [ 0.184573] pci 0000:00:1c.2: PCI bridge, secondary bus 0000:03 [ 0.184577] pci 0000:00:1c.2: IO window: 0x4000-0x4fff [ 0.184584] pci 0000:00:1c.2: MEM window: 0xb2000000-0xb3ffffff [ 0.184589] pci 0000:00:1c.2: PREFETCH window: 0x000000c8000000-0x000000c80fffff [ 0.184599] pci 0000:0b:00.0: CardBus bridge, secondary bus 0000:0c [ 0.184602] pci 0000:0b:00.0: IO window: 0x005000-0x0050ff [ 0.184608] pci 0000:0b:00.0: IO window: 0x005400-0x0054ff [ 0.184615] pci 0000:0b:00.0: PREFETCH window: 0xd0000000-0xd3ffffff [ 0.184621] pci 0000:0b:00.0: MEM window: 0xb8000000-0xbbffffff [ 0.184628] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:0b [ 0.184631] pci 0000:00:1e.0: IO window: 0x5000-0x8fff [ 0.184638] pci 0000:00:1e.0: MEM window: 0xb4000000-0xbfffffff [ 0.184643] pci 0000:00:1e.0: PREFETCH window: 0x000000d0000000-0x000000d7ffffff [ 0.184658] alloc irq_desc for 16 on node -1 [ 0.184661] alloc kstat_irqs on node -1 [ 0.184667] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.184671] pci 0000:00:01.0: setting latency timer to 64 [ 0.184679] alloc irq_desc for 20 on node -1 [ 0.184681] alloc kstat_irqs on node -1 [ 0.184684] pci 0000:00:1c.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 [ 0.184690] pci 0000:00:1c.0: setting latency timer to 64 [ 0.184698] alloc irq_desc for 22 on node -1 [ 0.184700] alloc kstat_irqs on node -1 [ 0.184703] pci 0000:00:1c.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22 [ 0.184709] pci 0000:00:1c.2: setting latency timer to 64 [ 0.184717] pci 0000:00:1e.0: setting latency timer to 64 [ 0.184727] pci 0000:0b:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.184735] pci_bus 0000:00: resource 0 io: [0x00-0xffff] [ 0.184738] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff] [ 0.184742] pci_bus 0000:01: resource 0 io: [0x3000-0x3fff] [ 0.184745] pci_bus 0000:01: resource 1 mem: [0xb0100000-0xb01fffff] [ 0.184748] pci_bus 0000:01: resource 2 pref mem [0xc0000000-0xc7ffffff] [ 0.184751] pci_bus 0000:02: resource 1 mem: [0xb0200000-0xb02fffff] [ 0.184754] pci_bus 0000:03: resource 0 io: [0x4000-0x4fff] [ 0.184757] pci_bus 0000:03: resource 1 mem: [0xb2000000-0xb3ffffff] [ 0.184760] pci_bus 0000:03: resource 2 pref mem [0xc8000000-0xc80fffff] [ 0.184763] pci_bus 0000:0b: resource 0 io: [0x5000-0x8fff] [ 0.184766] pci_bus 0000:0b: resource 1 mem: [0xb4000000-0xbfffffff] [ 0.184769] pci_bus 0000:0b: resource 2 pref mem [0xd0000000-0xd7ffffff] [ 0.184772] pci_bus 0000:0b: resource 3 io: [0x00-0xffff] [ 0.184775] pci_bus 0000:0b: resource 4 mem: [0x000000-0xffffffff] [ 0.184778] pci_bus 0000:0c: resource 0 io: [0x5000-0x50ff] [ 0.184781] pci_bus 0000:0c: resource 1 io: [0x5400-0x54ff] [ 0.184784] pci_bus 0000:0c: resource 2 pref mem [0xd0000000-0xd3ffffff] [ 0.184787] pci_bus 0000:0c: resource 3 mem: [0xb8000000-0xbbffffff] [ 0.184821] NET: Registered protocol family 2 [ 0.184913] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.185224] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.186139] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 0.186774] TCP: Hash tables configured (established 131072 bind 65536) [ 0.186777] TCP reno registered [ 0.186897] NET: Registered protocol family 1 [ 0.186978] Trying to unpack rootfs image as initramfs... [ 0.640007] Switched to high resolution mode on CPU 0 [ 1.814768] Freeing initrd memory: 5620k freed [ 1.819218] Simple Boot Flag at 0x35 set to 0x1 [ 1.819319] cpufreq-nforce2: No nForce2 chipset. [ 1.819366] Scanning for low memory corruption every 60 seconds [ 1.819499] audit: initializing netlink socket (disabled) [ 1.819530] type=2000 audit(1257287460.816:1): initialized [ 1.828975] HugeTLB registered 4 MB page size, pre-allocated 0 pages [ 1.830499] VFS: Disk quotas dquot_6.5.2 [ 1.830562] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 1.831142] fuse init (API version 7.12) [ 1.831240] msgmni has been set to 1496 [ 1.831434] alg: No test for stdrng (krng) [ 1.831449] io scheduler noop registered [ 1.831451] io scheduler anticipatory registered [ 1.831453] io scheduler deadline registered [ 1.831495] io scheduler cfq registered (default) [ 1.831602] pci 0000:01:00.0: Boot video device [ 1.831711] alloc irq_desc for 24 on node -1 [ 1.831713] alloc kstat_irqs on node -1 [ 1.831723] pcieport-driver 0000:00:01.0: irq 24 for MSI/MSI-X [ 1.831730] pcieport-driver 0000:00:01.0: setting latency timer to 64 [ 1.831837] alloc irq_desc for 25 on node -1 [ 1.831839] alloc kstat_irqs on node -1 [ 1.831848] pcieport-driver 0000:00:1c.0: irq 25 for MSI/MSI-X [ 1.831858] pcieport-driver 0000:00:1c.0: setting latency timer to 64 [ 1.832018] alloc irq_desc for 26 on node -1 [ 1.832021] alloc kstat_irqs on node -1 [ 1.832029] pcieport-driver 0000:00:1c.2: irq 26 for MSI/MSI-X [ 1.832040] pcieport-driver 0000:00:1c.2: setting latency timer to 64 [ 1.832144] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 1.832234] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 1.832811] ACPI: AC Adapter [AC] (on-line) [ 1.832879] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0 [ 1.832883] ACPI: Power Button [PWRF] [ 1.832937] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input1 [ 1.833476] ACPI: Lid Switch [LID] [ 1.833524] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2 [ 1.833530] ACPI: Sleep Button [SLPB] [ 1.835356] Marking TSC unstable due to TSC halts in idle [ 1.835376] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3]) [ 1.835402] processor LNXCPU:00: registered as cooling_device0 [ 1.835406] ACPI: Processor [CPU0] (supports 8 throttling states) [ 1.841371] thermal LNXTHERM:01: registered as thermal_zone0 [ 1.841383] ACPI: Thermal Zone [THM0] (57 C) [ 1.841429] isapnp: Scanning for PnP cards... [ 2.196680] isapnp: No Plug & Play device found [ 2.197814] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 2.198751] serial 00:0a: activated [ 2.198862] 00:0a: ttyS0 at I/O 0x3f8 (irq = 4) is a NS16550A [ 2.198977] alloc irq_desc for 23 on node -1 [ 2.198980] alloc kstat_irqs on node -1 [ 2.198987] serial 0000:00:1e.3: PCI INT B -> GSI 23 (level, low) -> IRQ 23 [ 2.198993] serial 0000:00:1e.3: PCI INT B disabled [ 2.199938] brd: module loaded [ 2.200481] loop: module loaded [ 2.200554] input: Macintosh mouse button emulation as /devices/virtual/input/input3 [ 2.200628] ahci 0000:00:1f.2: version 3.0 [ 2.200648] ahci: probe of 0000:00:1f.2 failed with error -22 [ 2.200687] ata_piix 0000:00:1f.2: version 2.13 [ 2.200696] ata_piix 0000:00:1f.2: MAP [ P0 P2 IDE IDE ] [ 2.200736] ata_piix 0000:00:1f.2: setting latency timer to 64 [ 2.200814] scsi0 : ata_piix [ 2.200947] scsi1 : ata_piix [ 2.201895] ata1: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x18c0 irq 14 [ 2.201899] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x18c8 irq 15 [ 2.202772] Fixed MDIO Bus: probed [ 2.202809] PPP generic driver version 2.4.2 [ 2.202892] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 2.237993] ACPI: Battery Slot [BAT0] (battery present) [ 2.242590] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0 [ 2.242598] alloc irq_desc for 19 on node -1 [ 2.242601] alloc kstat_irqs on node -1 [ 2.242606] ehci_hcd 0000:00:1d.7: PCI INT D -> GSI 19 (level, low) -> IRQ 19 [ 2.242618] ehci_hcd 0000:00:1d.7: setting latency timer to 64 [ 2.242623] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 2.242675] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1 [ 2.246593] ehci_hcd 0000:00:1d.7: debug port 1 [ 2.246600] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported [ 2.246615] ehci_hcd 0000:00:1d.7: irq 19, io mem 0xb0000000 [ 2.260017] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 2.260109] usb usb1: configuration #1 chosen from 1 choice [ 2.260144] hub 1-0:1.0: USB hub found [ 2.260152] hub 1-0:1.0: 8 ports detected [ 2.260223] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 2.260240] uhci_hcd: USB Universal Host Controller Interface driver [ 2.260659] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0 [ 2.260665] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 2.260672] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [ 2.260675] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 2.260711] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 2.260744] uhci_hcd 0000:00:1d.0: irq 16, io base 0x00001800 [ 2.260832] usb usb2: configuration #1 chosen from 1 choice [ 2.260858] hub 2-0:1.0: USB hub found [ 2.260865] hub 2-0:1.0: 2 ports detected [ 2.261404] uhci_hcd 0000:00:1d.1: power state changed by ACPI to D0 [ 2.261409] alloc irq_desc for 17 on node -1 [ 2.261411] alloc kstat_irqs on node -1 [ 2.261416] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 2.261422] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [ 2.261426] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 2.261459] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 [ 2.261493] uhci_hcd 0000:00:1d.1: irq 17, io base 0x00001820 [ 2.261573] usb usb3: configuration #1 chosen from 1 choice [ 2.261603] hub 3-0:1.0: USB hub found [ 2.261610] hub 3-0:1.0: 2 ports detected [ 2.261654] alloc irq_desc for 18 on node -1 [ 2.261656] alloc kstat_irqs on node -1 [ 2.261660] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 2.261666] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [ 2.261670] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 2.261698] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 [ 2.261732] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001840 [ 2.261810] usb usb4: configuration #1 chosen from 1 choice [ 2.261837] hub 4-0:1.0: USB hub found [ 2.261843] hub 4-0:1.0: 2 ports detected [ 2.261886] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19 [ 2.261892] uhci_hcd 0000:00:1d.3: setting latency timer to 64 [ 2.261896] uhci_hcd 0000:00:1d.3: UHCI Host Controller [ 2.261928] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5 [ 2.261953] uhci_hcd 0000:00:1d.3: irq 19, io base 0x00001860 [ 2.262032] usb usb5: configuration #1 chosen from 1 choice [ 2.262058] hub 5-0:1.0: USB hub found [ 2.262064] hub 5-0:1.0: 2 ports detected [ 2.262169] PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12 [ 2.269733] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 2.269739] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 2.269791] mice: PS/2 mouse device common for all mice [ 2.269899] rtc_cmos 00:06: RTC can wake from S4 [ 2.269933] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0 [ 2.269963] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs [ 2.270070] device-mapper: uevent: version 1.0.3 [ 2.270151] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com [ 2.270224] device-mapper: multipath: version 1.1.0 loaded [ 2.270227] device-mapper: multipath round-robin: version 1.0.0 loaded [ 2.270346] EISA: Probing bus 0 at eisa.0 [ 2.270353] Cannot allocate resource for EISA slot 1 [ 2.270356] Cannot allocate resource for EISA slot 2 [ 2.270358] Cannot allocate resource for EISA slot 3 [ 2.270360] Cannot allocate resource for EISA slot 4 [ 2.270363] Cannot allocate resource for EISA slot 5 [ 2.270365] Cannot allocate resource for EISA slot 6 [ 2.270367] Cannot allocate resource for EISA slot 7 [ 2.270370] Cannot allocate resource for EISA slot 8 [ 2.270372] EISA: Detected 0 cards. [ 2.270452] cpuidle: using governor ladder [ 2.270514] cpuidle: using governor menu [ 2.271006] TCP cubic registered [ 2.271177] NET: Registered protocol family 10 [ 2.271600] lo: Disabled Privacy Extensions [ 2.271904] NET: Registered protocol family 17 [ 2.271921] Bluetooth: L2CAP ver 2.13 [ 2.271923] Bluetooth: L2CAP socket layer initialized [ 2.271926] Bluetooth: SCO (Voice Link) ver 0.6 [ 2.271927] Bluetooth: SCO socket layer initialized [ 2.271962] Bluetooth: RFCOMM TTY layer initialized [ 2.271965] Bluetooth: RFCOMM socket layer initialized [ 2.271967] Bluetooth: RFCOMM ver 1.11 [ 2.272113] P-state transition latency capped at 20 uS [ 2.272431] Using IPI No-Shortcut mode [ 2.272492] PM: Resume from disk failed. [ 2.272503] registered taskstats version 1 [ 2.272601] Magic number: 1:69:552 [ 2.272645] pci_link PNP0C0F:03: hash matches [ 2.272678] rtc_cmos 00:06: setting system clock to 2009-11-03 22:31:02 UTC (1257287462) [ 2.272682] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 2.272684] EDD information not available. [ 2.274844] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4 [ 2.364756] ata2.00: ATAPI: MATSHITADVD-RAM UJ-822Sy, RC01, max UDMA/33 [ 2.365245] ata1.00: ATA-6: HTS541060G9AT00, MB3IA6CA, max UDMA/100 [ 2.365249] ata1.00: 117210240 sectors, multi 16: LBA [ 2.365262] ata1.00: applying bridge limits [ 2.380695] ata2.00: configured for UDMA/33 [ 2.381116] ata1.00: configured for UDMA/100 [ 2.381240] scsi 0:0:0:0: Direct-Access ATA HTS541060G9AT00 MB3I PQ: 0 ANSI: 5 [ 2.381355] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 2.381395] sd 0:0:0:0: [sda] 117210240 512-byte logical blocks: (60.0 GB/55.8 GiB) [ 2.381444] sd 0:0:0:0: [sda] Write Protect is off [ 2.381447] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 2.381472] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.381601] sda: [ 2.383500] scsi 1:0:0:0: CD-ROM MATSHITA DVD-RAM UJ-822Sy RC01 PQ: 0 ANSI: 5 [ 2.385034] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray [ 2.385038] Uniform CD-ROM driver Revision: 3.20 [ 2.385109] sr 1:0:0:0: Attached scsi CD-ROM sr0 [ 2.385149] sr 1:0:0:0: Attached scsi generic sg1 type 5 [ 2.744848] sda1 sda2 sda3 < sda5 sda6 > [ 2.778560] sd 0:0:0:0: [sda] Attached SCSI disk [ 2.778575] Freeing unused kernel memory: 540k freed [ 2.778879] Write protecting the kernel text: 4568k [ 2.778917] Write protecting the kernel read-only data: 1836k [ 2.880229] usb 4-2: new full speed USB device using uhci_hcd and address 2 [ 2.950458] Linux agpgart interface v0.103 [ 2.956343] Floppy drive(s): fd0 is 1.44M [ 2.972550] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:03/device:04/input/input5 [ 2.972599] ACPI: Video Device [VID] (multi-head: yes rom: no post: no) [ 2.981477] FDC 0 is a National Semiconductor PC87306 [ 3.028931] tg3.c:v3.99 (April 20, 2009) [ 3.028952] tg3 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 3.028964] tg3 0000:02:00.0: setting latency timer to 64 [ 3.051158] tg3 0000:02:00.0: PME# disabled [ 3.102488] [drm] Initialized drm 1.1.0 20060810 [ 3.113272] eth0: Tigon3 [partno(BCM95751M) rev 4101] (PCI Express) MAC address 00:01:6c:c9:e1:b2 [ 3.113278] eth0: attached PHY is 5750 (10/100/1000Base-T Ethernet) (WireSpeed[1]) [ 3.113281] eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1] [ 3.113284] eth0: dma_rwctrl[76180000] dma_mask[64-bit] [ 3.125358] [drm] radeon default to kernel modesetting DISABLED. [ 3.125571] pci 0000:01:00.0: power state changed by ACPI to D0 [ 3.125586] pci 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 3.125592] pci 0000:01:00.0: setting latency timer to 64 [ 3.125730] [drm] Initialized radeon 1.31.0 20080528 for 0000:01:00.0 on minor 0 [ 3.134356] usb 4-2: configuration #1 chosen from 1 choice [ 4.076685] xor: automatically using best checksumming function: pIII_sse [ 4.096007] pIII_sse : 4838.000 MB/sec [ 4.096010] xor: using function: pIII_sse (4838.000 MB/sec) [ 4.099411] device-mapper: dm-raid45: initialized v0.2594b [ 4.512546] EXT3-fs: INFO: recovery required on readonly filesystem. [ 4.512551] EXT3-fs: write access will be enabled during recovery. [ 4.565076] kjournald starting. Commit interval 5 seconds [ 4.565084] EXT3-fs: recovery complete. [ 4.565812] EXT3-fs: mounted filesystem with writeback data mode. [ 8.298285] ISO 9660 Extensions: Microsoft Joliet Level 3 [ 8.341076] ISO 9660 Extensions: RRIP_1991A [ 8.631867] aufs 2-standalone.tree-30-20090727 [ 8.864361] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 74.539281] Adding 915664k swap on /dev/sda6. Priority:-1 extents:1 across:915664k [ 76.482094] udev: starting version 147 [ 81.355023] intel_rng: FWH not detected [ 82.015640] cfg80211: Calling CRDA to update world regulatory domain [ 82.564175] ip_tables: (C) 2000-2006 Netfilter Core Team [ 82.682791] yenta_cardbus 0000:0b:00.0: CardBus bridge found [1014:056c] [ 82.808563] Synaptics Touchpad, model: 1, fw: 5.9, id: 0x2c6ab1, caps: 0x884793/0x0 [ 82.808570] serio: Synaptics pass-through port at isa0060/serio1/input0 [ 82.812956] yenta_cardbus 0000:0b:00.0: ISA IRQ mask 0x0cb8, PCI irq 16 [ 82.812960] yenta_cardbus 0000:0b:00.0: Socket status: 30000006 [ 82.812967] yenta_cardbus 0000:0b:00.0: pcmcia: parent PCI bridge I/O window: 0x5000 - 0x8fff [ 82.812972] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x5000-0x8fff: clean. [ 82.813898] yenta_cardbus 0000:0b:00.0: pcmcia: parent PCI bridge Memory window: 0xb4000000 - 0xbfffffff [ 82.813902] yenta_cardbus 0000:0b:00.0: pcmcia: parent PCI bridge Memory window: 0xd0000000 - 0xd7ffffff [ 82.847670] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input6 [ 83.284821] Non-volatile memory driver v1.3 [ 83.753822] parport_pc 00:0b: reported by Plug and Play ACPI [ 83.753877] parport0: PC-style at 0x3bc, irq 7 [PCSPP,TRISTATE] [ 84.000914] thinkpad_acpi: ThinkPad ACPI Extras v0.23 [ 84.000917] thinkpad_acpi: http://ibm-acpi.sf.net/ [ 84.000920] thinkpad_acpi: ThinkPad BIOS 1YET65WW (1.29 ), EC 1YHT29WW-1.06 [ 84.000922] thinkpad_acpi: IBM ThinkPad T43, model 2686EGU [ 84.027218] Registered led device: tpacpi::thinklight [ 84.027267] Registered led device: tpacpi::power [ 84.027283] Registered led device: tpacpi::standby [ 84.043971] thinkpad_acpi: fan_init: initial fan status is unknown, assuming it is in auto mode [ 84.046307] input: ThinkPad Extra Buttons as /devices/virtual/input/input7 [ 84.624892] irda_init() [ 84.624911] NET: Registered protocol family 23 [ 84.919310] ppdev: user-space parallel port driver [ 85.252683] alloc irq_desc for 21 on node -1 [ 85.252688] alloc kstat_irqs on node -1 [ 85.252696] ath5k 0000:0b:02.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21 [ 85.252747] ath5k 0000:0b:02.0: registered as 'phy0' [ 85.308944] nsc-ircc 00:0c: activated [ 85.308949] nsc_ircc_pnp_probe() : From PnP, found firbase 0x2F8 ; irq 3 ; dma 1. [ 85.309000] nsc-ircc, chip->init [ 85.309012] nsc-ircc, Found chip at base=0x02e [ 85.309047] nsc-ircc, driver loaded (Dag Brattli) [ 85.309701] IrDA: Registered device irda0 [ 85.309704] nsc-ircc, Using dongle: IBM31T1100 or Temic TFDS6000/TFDS6500 [ 85.397914] ath: EEPROM regdomain: 0x66 [ 85.397918] ath: EEPROM indicates we should expect a direct regpair map [ 85.397923] ath: Country alpha2 being used: 00 [ 85.397925] ath: Regpair used: 0x66 [ 85.510180] psmouse serio2: ID: 10 00 64 [ 86.567542] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x100-0x3af: clean. [ 86.569221] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7 [ 86.569921] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x820-0x8ff: clean. [ 86.570509] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xc00-0xcf7: clean. [ 86.571270] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xa00-0xaff: clean. [ 86.843974] phy0: Selected rate control algorithm 'minstrel' [ 86.844740] Registered led device: ath5k-phy0::rx [ 86.844758] Registered led device: ath5k-phy0::tx [ 86.844761] ath5k phy0: Atheros AR5213A chip found (MAC: 0x59, PHY: 0x43) [ 86.844765] ath5k phy0: RF5112B multiband radio found (0x36) [ 87.947897] cfg80211: World regulatory domain updated: [ 87.947902] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 87.947906] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 87.947909] (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 87.947912] (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 87.947915] (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 87.947918] (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 88.150984] tg3 0000:02:00.0: PME# disabled [ 88.341843] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 88.372711] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 88.664312] Intel ICH 0000:00:1e.2: PCI INT A -> GSI 22 (level, low) -> IRQ 22 [ 88.664369] Intel ICH 0000:00:1e.2: setting latency timer to 64 [ 89.587037] IBM TrackPoint firmware: 0x0e, buttons: 3/3 [ 89.614963] intel8x0_measure_ac97_clock: measured 58412 usecs (2814 samples) [ 89.614966] intel8x0: clocking to 48000 [ 89.905133] input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/serio2/input/input8 [ 95.183326] lp0: using parport0 (interrupt-driven). [ 102.456110] [drm] Setting GART location based on new memory map [ 102.458070] [drm] Loading R300 Microcode [ 102.458112] [drm] Num pipes: 1 [ 102.458120] [drm] writeback test succeeded in 1 usecs [ 164.136035] Clocksource tsc unstable (delta = -215098156 ns) [ 352.268783] thinkpad_acpi: deprecated sysfs attribute: access by process with PID 3353 [ 352.268788] thinkpad_acpi: WARNING: sysfs attribute hotkey_enable is deprecated and will be removed. Hotkey reporting is always enabled [ 880.452709] wlan0: authenticate with AP 00:18:01:f2:33:7e [ 880.454270] wlan0: authenticated [ 880.454273] wlan0: associate with AP 00:18:01:f2:33:7e [ 880.456384] wlan0: RX AssocResp from 00:18:01:f2:33:7e (capab=0x431 status=0 aid=2) [ 880.456388] wlan0: associated [ 880.457076] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 880.508215] cfg80211: Calling CRDA for country: US [ 880.510570] cfg80211: Received country IE: [ 880.510574] cfg80211: Regulatory domain: US [ 880.510576] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 880.510579] (2402000 KHz - 2477000 KHz @ 40000 KHz), (10000 mBi, 10000 mBm) [ 880.510582] cfg80211: CRDA thinks this should applied: [ 880.510584] cfg80211: Regulatory domain: US [ 880.510586] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 880.510589] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) [ 880.510592] (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm) [ 880.510595] (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 880.510598] (5490000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 880.510601] (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm) [ 880.510603] cfg80211: We intersect both of these and get: [ 880.510605] cfg80211: Regulatory domain: 98 [ 880.510607] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 880.510610] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) [ 880.510615] cfg80211: Disabling channel 2467 MHz on phy0 due to Country IE [ 880.510618] cfg80211: Disabling channel 2472 MHz on phy0 due to Country IE [ 880.510620] cfg80211: Disabling channel 2484 MHz on phy0 due to Country IE [ 880.510623] cfg80211: Leaving channel 5180 MHz intact on phy0 - no rule found in band on Country IE [ 880.510626] cfg80211: Leaving channel 5200 MHz intact on phy0 - no rule found in band on Country IE [ 880.510629] cfg80211: Leaving channel 5220 MHz intact on phy0 - no rule found in band on Country IE [ 880.510631] cfg80211: Leaving channel 5240 MHz intact on phy0 - no rule found in band on Country IE [ 880.510634] cfg80211: Leaving channel 5260 MHz intact on phy0 - no rule found in band on Country IE [ 880.510637] cfg80211: Leaving channel 5280 MHz intact on phy0 - no rule found in band on Country IE [ 880.510640] cfg80211: Leaving channel 5300 MHz intact on phy0 - no rule found in band on Country IE [ 880.510643] cfg80211: Leaving channel 5320 MHz intact on phy0 - no rule found in band on Country IE [ 880.510646] cfg80211: Leaving channel 5500 MHz intact on phy0 - no rule found in band on Country IE [ 880.510649] cfg80211: Leaving channel 5520 MHz intact on phy0 - no rule found in band on Country IE [ 880.510652] cfg80211: Leaving channel 5540 MHz intact on phy0 - no rule found in band on Country IE [ 880.510654] cfg80211: Leaving channel 5560 MHz intact on phy0 - no rule found in band on Country IE [ 880.510657] cfg80211: Leaving channel 5580 MHz intact on phy0 - no rule found in band on Country IE [ 880.510660] cfg80211: Leaving channel 5600 MHz intact on phy0 - no rule found in band on Country IE [ 880.510663] cfg80211: Leaving channel 5620 MHz intact on phy0 - no rule found in band on Country IE [ 880.510666] cfg80211: Leaving channel 5640 MHz intact on phy0 - no rule found in band on Country IE [ 880.510669] cfg80211: Leaving channel 5660 MHz intact on phy0 - no rule found in band on Country IE [ 880.510672] cfg80211: Leaving channel 5680 MHz intact on phy0 - no rule found in band on Country IE [ 880.510675] cfg80211: Leaving channel 5700 MHz intact on phy0 - no rule found in band on Country IE [ 880.510678] cfg80211: Leaving channel 5745 MHz intact on phy0 - no rule found in band on Country IE [ 880.510681] cfg80211: Leaving channel 5765 MHz intact on phy0 - no rule found in band on Country IE [ 880.510683] cfg80211: Leaving channel 5785 MHz intact on phy0 - no rule found in band on Country IE [ 880.510686] cfg80211: Leaving channel 5805 MHz intact on phy0 - no rule found in band on Country IE [ 880.510689] cfg80211: Leaving channel 5825 MHz intact on phy0 - no rule found in band on Country IE [ 880.510699] cfg80211: Current regulatory domain updated by AP to: US [ 880.510701] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 880.510704] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) [ 890.824015] wlan0: no IPv6 routers present 00:00.0 Host bridge [0600]: Intel Corporation Mobile 915GM/PM/GMS/910GML Express Processor to DRAM Controller [8086:2590] (rev 03) Subsystem: IBM Device [1014:0575] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- SERR- Kernel modules: intel-agp 00:01.0 PCI bridge [0604]: Intel Corporation Mobile 915GM/PM Express PCI Express Root Port [8086:2591] (rev 03) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- TAbort- Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: [88] Subsystem: IBM Device [1014:0578] Capabilities: [80] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Capabilities: [90] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable+ Address: fee0100c Data: 4161 Capabilities: [a0] Express (v1) Root Port (Slot+), MSI 00 DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us ExtTag- RBE- FLReset- DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported- RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- MaxPayload 128 bytes, MaxReadReq 128 bytes DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend- LnkCap: Port #2, Speed 2.5GT/s, Width x16, ASPM L0s L1, Latency L0 <256ns, L1 <4us ClockPM- Suprise- LLActRep- BwNot- LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk- ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- LnkSta: Speed 2.5GT/s, Width x16, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt- SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surpise- Slot # 1, PowerLimit 75.000000; Interlock- NoCompl- SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg- Control: AttnInd Off, PwrInd On, Power- Interlock- SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock- Changed: MRL- PresDet+ LinkState- RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible- RootCap: CRSVisible- RootSta: PME ReqID 0000, PMEStatus- PMEPending- Capabilities: [100] Virtual Channel Capabilities: [140] Root Complex Link Kernel driver in use: pcieport-driver Kernel modules: shpchp 00:1c.0 PCI bridge [0604]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) PCI Express Port 1 [8086:2660] (rev 03) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- TAbort- Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: [40] Express (v1) Root Port (Slot+), MSI 00 DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s unlimited, L1 unlimited ExtTag+ RBE- FLReset- DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported- RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- MaxPayload 128 bytes, MaxReadReq 128 bytes DevSta: CorrErr+ UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend- LnkCap: Port #1, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <256ns, L1 <4us ClockPM- Suprise- LLActRep- BwNot- LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+ ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt- SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surpise+ Slot # 1, PowerLimit 6.500000; Interlock- NoCompl- SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg- Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock- SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock- Changed: MRL- PresDet- LinkState- RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible- RootCap: CRSVisible- RootSta: PME ReqID 0000, PMEStatus- PMEPending- Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable+ Address: fee0100c Data: 4169 Capabilities: [90] Subsystem: Gammagraphx, Inc. (or missing ID) Device [0000:0000] Capabilities: [a0] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Capabilities: [100] Virtual Channel Capabilities: [180] Root Complex Link Kernel driver in use: pcieport-driver Kernel modules: shpchp 00:1c.2 PCI bridge [0604]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) PCI Express Port 3 [8086:2664] (rev 03) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- TAbort- Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: [40] Express (v1) Root Port (Slot+), MSI 00 DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s unlimited, L1 unlimited ExtTag+ RBE- FLReset- DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported- RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- MaxPayload 128 bytes, MaxReadReq 128 bytes DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend- LnkCap: Port #3, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <1us, L1 <4us ClockPM- Suprise- LLActRep- BwNot- LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk- ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- LnkSta: Speed 2.5GT/s, Width x0, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt- SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surpise+ Slot # 3, PowerLimit 6.500000; Interlock- NoCompl- SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet+ CmdCplt- HPIrq+ LinkChg- Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock- SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet- Interlock- Changed: MRL- PresDet- LinkState- RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible- RootCap: CRSVisible- RootSta: PME ReqID 0000, PMEStatus- PMEPending- Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable+ Address: fee0100c Data: 4171 Capabilities: [90] Subsystem: Gammagraphx, Inc. (or missing ID) Device [0000:0000] Capabilities: [a0] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Capabilities: [100] Virtual Channel Capabilities: [180] Root Complex Link Kernel driver in use: pcieport-driver Kernel modules: shpchp 00:1d.0 USB Controller [0c03]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #1 [8086:2658] (rev 03) Subsystem: IBM Device [1014:0565] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: [50] Subsystem: Gammagraphx, Inc. (or missing ID) Device [0000:0000] 00:1e.2 Multimedia audio controller [0401]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) AC'97 Audio Controller [8086:266e] (rev 03) Subsystem: IBM Device [1014:0567] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- Kernel modules: radeon, radeonfb 02:00.0 Ethernet controller [0200]: Broadcom Corporation NetXtreme BCM5751M Gigabit Ethernet PCI Express [14e4:167d] (rev 11) Subsystem: IBM Device [1014:0577] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- [disabled] Capabilities: [48] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=1 PME- Capabilities: [50] Vital Product Data Capabilities: [58] Message Signalled Interrupts: Mask- 64bit+ Queue=0/3 Enable- Address: fbb3ffefdfff7fdc Data: fffc Capabilities: [d0] Express (v1) Endpoint, MSI 00 DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <4us, L1 unlimited ExtTag+ AttnBtn- AttnInd- PwrInd- RBE- FLReset- DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported- RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- MaxPayload 128 bytes, MaxReadReq 4096 bytes DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend- LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s, Latency L0 <4us, L1 <64us ClockPM- Suprise- LLActRep- BwNot- LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+ ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt- Capabilities: [100] Advanced Error Reporting Capabilities: [13c] Virtual Channel Kernel driver in use: tg3 Kernel modules: tg3 0b:00.0 CardBus bridge [0607]: Ricoh Co Ltd RL5c476 II [1180:0476] (rev 8d) Subsystem: IBM Device [1014:056c] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- SERR- Reset- 16bInt+ PostWrite+ 16-bit legacy interface ports at 0001 Kernel driver in use: yenta_cardbus Kernel modules: yenta_socket 0b:02.0 Ethernet controller [0200]: Atheros Communications Inc. AR5212 802.11abg NIC [168c:1014] (rev 01) Subsystem: IBM Device [1014:057e] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B+ DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR-