WARNING: at /build/buildd/linux-2.6.31/kernel/power/suspend_test.c:52 suspend_test_finish+0x80/0x90()

[RickeyLBuie]

This happened onDell Inspiron Desktop i386
Ubuntu lucid(development branch)
release 10.04
Linux rickey-desktop 2.6.31-14-generic #48-ubuntu SMP Fri Oct 16 14:04:26 UTC 20 09 i686 GNU/Linux
Ubuntu 2.6.31-14.48-generic
[ 0.173997] pci 0000:00:1f.0: quirk: region 0480-04bf claimed by ICH6 GPIO
[ 0.174001] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0800 (mask 003f)
[ 0.174004] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 0290 (mask 003f)
[ 0.174059] pci 0000:00:1f.2: reg 10 io port: [0xf700-0xf707]
[ 0.174065] pci 0000:00:1f.2: reg 14 io port: [0xf600-0xf603]
[ 0.174070] pci 0000:00:1f.2: reg 18 io port: [0xf500-0xf507]
[ 0.174076] pci 0000:00:1f.2: reg 1c io port: [0xf400-0xf403]
[ 0.174082] pci 0000:00:1f.2: reg 20 io port: [0xf300-0xf30f]
[ 0.174088] pci 0000:00:1f.2: reg 24 io port: [0xf200-0xf20f]
[ 0.174135] pci 0000:00:1f.3: reg 10 64bit mmio: [0xfdffc000-0xfdffc0ff]
[ 0.174149] pci 0000:00:1f.3: reg 20 io port: [0x500-0x51f]
[ 0.174192] pci 0000:00:1f.5: reg 10 io port: [0xf000-0xf007]
[ 0.174198] pci 0000:00:1f.5: reg 14 io port: [0xef00-0xef03]
[ 0.174204] pci 0000:00:1f.5: reg 18 io port: [0xee00-0xee07]
[ 0.174210] pci 0000:00:1f.5: reg 1c io port: [0xed00-0xed03]
[ 0.174216] pci 0000:00:1f.5: reg 20 io port: [0xec00-0xec0f]
[ 0.174222] pci 0000:00:1f.5: reg 24 io port: [0xeb00-0xeb0f]
[ 0.174289] pci 0000:00:01.0: bridge io port: [0xc000-0xcfff]
[ 0.174293] pci 0000:00:01.0: bridge 32bit mmio: [0xfde00000-0xfdefffff]
[ 0.174298] pci 0000:00:01.0: bridge 64bit mmio pref: [0xfda00000-0xfdafffff]
[ 0.174330] pci 0000:02:00.0: reg 10 32bit mmio: [0xfddf0000-0xfddfffff]
[ 0.174337] pci 0000:02:00.0: reg 14 io port: [0xdf00-0xdf07]
[ 0.174379] pci 0000:02:00.0: PME# supported from D3hot D3cold
[ 0.174383] pci 0000:02:00.0: PME# disabled
[ 0.174430] pci 0000:00:1e.0: transparent bridge
[ 0.174434] pci 0000:00:1e.0: bridge io port: [0xd000-0xdfff]
[ 0.174437] pci 0000:00:1e.0: bridge 32bit mmio: [0xfdd00000-0xfddfffff]
[ 0.174444] pci 0000:00:1e.0: bridge 64bit mmio pref: [0xfdc00000-0xfdcfffff]
[ 0.174454] pci_bus 0000:00: on NUMA node 0
[ 0.174458] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.174625] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
[ 0.189189] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 7 9 10 11 12 14 15)
[ 0.189289] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
[ 0.189389] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 9 10 *11 12 14 15)
[ 0.189485] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 10 *11 12 14 15)
[ 0.189580] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 *10 11 12 14 15)
[ 0.189675] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 *4 5 7 9 10 11 12 14 15)
[ 0.189771] ACPI: PCI Interrupt Link [LNK0] (IRQs *3 4 5 7 9 10 11 12 14 15)
[ 0.189869] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 7 *9 10 11 12 14 15)
[ 0.190030] SCSI subsystem initialized
[ 0.190048] libata version 3.00 loaded.
[ 0.190048] usbcore: registered new interface driver usbfs
[ 0.190048] usbcore: registered new interface driver hub
[ 0.190048] usbcore: registered new device driver usb
[ 0.190048] ACPI: WMI: Mapper loaded
[ 0.190048] PCI: Using ACPI for IRQ routing
[ 0.200011] Bluetooth: Core ver 2.15
[ 0.200033] NET: Registered protocol family 31
[ 0.200033] Bluetooth: HCI device and connection manager initialized
[ 0.200033] Bluetooth: HCI socket layer initialized
[ 0.200033] NetLabel: Initializing
[ 0.200033] NetLabel: domain hash size = 128
[ 0.200034] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.200053] NetLabel: unlabeled traffic allowed by default
[ 0.200097] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[ 0.200107] hpet0: 4 comparators, 64-bit 14.318180 MHz counter
[ 0.216054] pnp: PnP ACPI init
[ 0.216069] ACPI: bus type pnp registered
[ 0.217782] pnp: PnP ACPI: found 12 devices
[ 0.217784] ACPI: ACPI bus type pnp unregistered
[ 0.217787] PnPBIOS: Disabled by ACPI PNP
[ 0.217797] system 00:01: ioport range 0x4d0-0x4d1 has been reserved
[ 0.217800] system 00:01: ioport range 0x800-0x87f has been reserved
[ 0.217803] system 00:01: ioport range 0x290-0x297 has been reserved
[ 0.217805] system 00:01: ioport range 0x880-0x88f has been reserved
[ 0.217813] system 00:08: ioport range 0x400-0x4bf could not be reserved
[ 0.217821] system 00:0a: iomem range 0xe0000000-0xefffffff has been reserved
[ 0.217826] system 00:0b: iomem range 0xf0000-0xfffff could not be reserved
[ 0.217829] system 00:0b: iomem range 0xcf600000-0xcf6fffff could not be reserved
[ 0.217832] system 00:0b: iomem range 0xfed00000-0xfed000ff has been reserved
[ 0.217835] system 00:0b: iomem range 0xcf590000-0xcf5fffff could not be reserved
[ 0.217838] system 00:0b: iomem range 0x0-0x9ffff could not be reserved
[ 0.217840] system 00:0b: iomem range 0x100000-0xcf58ffff could not be reserved
[ 0.217843] system 00:0b: iomem range 0xfec00000-0xfec00fff could not be reserved
[ 0.217846] system 00:0b: iomem range 0xfed14000-0xfed1dfff has been reserved
[ 0.217849] system 00:0b: iomem range 0xfed20000-0xfed9ffff has been reserved
[ 0.217851] system 00:0b: iomem range 0xfee00000-0xfee00fff has been reserved
[ 0.217854] system 00:0b: iomem range 0xffb00000-0xffb7ffff has been reserved
[ 0.217857] system 00:0b: iomem range 0xfff00000-0xffffffff has been reserved
[ 0.217859] system 00:0b: iomem range 0xe0000-0xeffff has been reserved
[ 0.252499] AppArmor: AppArmor Filesystem Enabled
[ 0.252527] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
[ 0.252530] pci 0000:00:01.0: IO window: 0xc000-0xcfff
[ 0.252535] pci 0000:00:01.0: MEM window: 0xfde00000-0xfdefffff
[ 0.252539] pci 0000:00:01.0: PREFETCH window: 0x000000fda00000-0x000000fdafffff
[ 0.252543] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:02
[ 0.252546] pci 0000:00:1e.0: IO window: 0xd000-0xdfff
[ 0.252551] pci 0000:00:1e.0: MEM window: 0xfdd00000-0xfddfffff
[ 0.252555] pci 0000:00:1e.0: PREFETCH window: 0x000000fdc00000-0x000000fdcfffff
[ 0.252568] alloc irq_desc for 16 on node -1
[ 0.252570] alloc kstat_irqs on node -1
[ 0.252575] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.252579] pci 0000:00:01.0: setting latency timer to 64
[ 0.252585] pci 0000:00:1e.0: setting latency timer to 64
[ 0.252589] pci_bus 0000:00: resource 0 io: [0x00-0xffff]
[ 0.252591] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
[ 0.252593] pci_bus 0000:01: resource 0 io: [0xc000-0xcfff]
[ 0.252596] pci_bus 0000:01: resource 1 mem: [0xfde00000-0xfdefffff]
[ 0.252598] pci_bus 0000:01: resource 2 pref mem [0xfda00000-0xfdafffff]
[ 0.252600] pci_bus 0000:02: resource 0 io: [0xd000-0xdfff]
[ 0.252603] pci_bus 0000:02: resource 1 mem: [0xfdd00000-0xfddfffff]
[ 0.252605] pci_bus 0000:02: resource 2 pref mem [0xfdc00000-0xfdcfffff]
[ 0.252607] pci_bus 0000:02: resource 3 io: [0x00-0xffff]
[ 0.252610] pci_bus 0000:02: resource 4 mem: [0x000000-0xffffffff]
[ 0.252640] NET: Registered protocol family 2
[ 0.252732] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.253030] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.253586] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.253852] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.253854] TCP reno registered
[ 0.253927] NET: Registered protocol family 1
[ 0.253986] Trying to unpack rootfs image as initramfs...
[ 0.425789] Freeing initrd memory: 7467k freed
[ 0.429662] cpufreq-nforce2: No nForce2 chipset.
[ 0.429690] Scanning for low memory corruption every 60 seconds
[ 0.429795] audit: initializing netlink socket (disabled)
[ 0.429813] type=2000 audit(1257214772.428:1): initialized
[ 0.437677] highmem bounce pool size: 64 pages
[ 0.437682] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 0.439045] VFS: Disk quotas dquot_6.5.2
[ 0.439100] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.439605] fuse init (API version 7.12)
[ 0.439690] msgmni has been set to 1673
[ 0.439888] alg: No test for stdrng (krng)
[ 0.439899] io scheduler noop registered
[ 0.439901] io scheduler anticipatory registered
[ 0.439903] io scheduler deadline registered
[ 0.439940] io scheduler cfq registered (default)
[ 0.439954] pci 0000:00:02.0: Boot video device
[ 0.440183] alloc irq_desc for 24 on node -1
[ 0.440185] alloc kstat_irqs on node -1
[ 0.440194] pcieport-driver 0000:00:01.0: irq 24 for MSI/MSI-X
[ 0.440201] pcieport-driver 0000:00:01.0: setting latency timer to 64
[ 0.440272] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.440295] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.440411] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[ 0.440415] ACPI: Power Button [PWRF]
[ 0.440465] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
[ 0.440467] ACPI: Power Button [PWRB]
[ 0.440518] fan PNP0C0B:00: registered as cooling_device0
[ 0.440526] ACPI: Fan [FAN] (on)
[ 0.441021] ACPI: SSDT cf5e7680 0026C (v01 PmRef Cpu0Ist 00003000 INTL 20041203)
[ 0.441217] processor LNXCPU:00: registered as cooling_device1
[ 0.441420] ACPI: SSDT cf5e7b40 00152 (v01 PmRef Cpu1Ist 00003000 INTL 20041203)
[ 0.441603] processor LNXCPU:01: registered as cooling_device2
[ 0.443372] thermal LNXTHERM:01: registered as thermal_zone0
[ 0.443380] ACPI: Thermal Zone [THRM] (40 C)
[ 0.443429] isapnp: Scanning for PnP cards...
[ 0.501631] Switched to high resolution mode on CPU 1
[ 0.504072] Switched to high resolution mode on CPU 0
[ 0.796394] isapnp: No Plug & Play device found
[ 0.797417] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.798623] brd: module loaded
[ 0.799038] loop: module loaded
[ 0.799099] input: Macintosh mouse button emulation as /devices/virtual/input/input2
[ 0.799196] ata_piix 0000:00:1f.2: version 2.13
[ 0.799210] alloc irq_desc for 19 on node -1
[ 0.799211] alloc kstat_irqs on node -1
[ 0.799217] ata_piix 0000:00:1f.2: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 0.799222] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
[ 0.799264] ata_piix 0000:00:1f.2: setting latency timer to 64
[ 0.799320] scsi0 : ata_piix
[ 0.799393] scsi1 : ata_piix
[ 0.800015] ata1: SATA max UDMA/133 cmd 0xf700 ctl 0xf600 bmdma 0xf300 irq 19
[ 0.800021] ata2: SATA max UDMA/133 cmd 0xf500 ctl 0xf400 bmdma 0xf308 irq 19
[ 0.800040] ata_piix 0000:00:1f.5: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 0.800046] ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
[ 0.800080] ata_piix 0000:00:1f.5: setting latency timer to 64
[ 0.800116] scsi2 : ata_piix
[ 0.800167] scsi3 : ata_piix
[ 0.800435] ata3: SATA max UDMA/133 cmd 0xf000 ctl 0xef00 bmdma 0xec00 irq 19
[ 0.800439] ata4: SATA max UDMA/133 cmd 0xee00 ctl 0xed00 bmdma 0xec08 irq 19
[ 0.801229] Fixed MDIO Bus: probed
[ 0.801261] PPP generic driver version 2.4.2
[ 0.801345] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.801361] alloc irq_desc for 18 on node -1
[ 0.801363] alloc kstat_irqs on node -1
[ 0.801367] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.801376] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[ 0.801379] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[ 0.801420] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
[ 0.805339] ehci_hcd 0000:00:1a.7: debug port 1
[ 0.805345] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
[ 0.805357] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xfdffe000
[ 0.820032] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[ 0.820153] usb usb1: configuration #1 chosen from 1 choice
[ 0.820199] hub 1-0:1.0: USB hub found
[ 0.820207] hub 1-0:1.0: 6 ports detected
[ 0.820260] alloc irq_desc for 23 on node -1
[ 0.820262] alloc kstat_irqs on node -1
[ 0.820266] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 0.820273] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 0.820276] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 0.820303] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
[ 0.824203] ehci_hcd 0000:00:1d.7: debug port 1
[ 0.824208] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[ 0.824219] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfdffd000
[ 0.840029] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 0.840139] usb usb2: configuration #1 chosen from 1 choice
[ 0.840186] hub 2-0:1.0: USB hub found
[ 0.840192] hub 2-0:1.0: 6 ports detected
[ 0.840243] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.840257] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.840279] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.840284] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[ 0.840287] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 0.840313] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[ 0.840341] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000fd00
[ 0.840409] usb usb3: configuration #1 chosen from 1 choice
[ 0.840432] hub 3-0:1.0: USB hub found
[ 0.840438] hub 3-0:1.0: 2 ports detected
[ 0.840477] alloc irq_desc for 21 on node -1
[ 0.840479] alloc kstat_irqs on node -1
[ 0.840484] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[ 0.840489] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[ 0.840492] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 0.840522] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[ 0.840549] uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000fc00
[ 0.840616] usb usb4: configuration #1 chosen from 1 choice
[ 0.840639] hub 4-0:1.0: USB hub found
[ 0.840645] hub 4-0:1.0: 2 ports detected
[ 0.840684] uhci_hcd 0000:00:1a.2: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[ 0.840690] uhci_hcd 0000:00:1a.2: setting latency timer to 64
[ 0.840693] uhci_hcd 0000:00:1a.2: UHCI Host Controller
[ 0.840721] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
[ 0.840741] uhci_hcd 0000:00:1a.2: irq 19, io base 0x0000fb00
[ 0.840808] usb usb5: configuration #1 chosen from 1 choice
[ 0.840832] hub 5-0:1.0: USB hub found
[ 0.840838] hub 5-0:1.0: 2 ports detected
[ 0.840881] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 0.840886] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 0.840889] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 0.840916] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
[ 0.840936] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000fa00
[ 0.841004] usb usb6: configuration #1 chosen from 1 choice
[ 0.841027] hub 6-0:1.0: USB hub found
[ 0.841033] hub 6-0:1.0: 2 ports detected
[ 0.841074] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 0.841080] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 0.841083] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 0.841109] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
[ 0.841130] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000f900
[ 0.841197] usb usb7: configuration #1 chosen from 1 choice
[ 0.841221] hub 7-0:1.0: USB hub found
[ 0.841226] hub 7-0:1.0: 2 ports detected
[ 0.841269] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.841274] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 0.841277] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 0.841305] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
[ 0.841325] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000f800
[ 0.841390] usb usb8: configuration #1 chosen from 1 choice
[ 0.841416] hub 8-0:1.0: USB hub found
[ 0.841422] hub 8-0:1.0: 2 ports detected
[ 0.841512] PNP: No PS/2 controller found. Probing ports directly.
[ 0.841798] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.841804] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.841857] mice: PS/2 mouse device common for all mice
[ 0.841942] rtc_cmos 00:04: RTC can wake from S4
[ 0.841969] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
[ 0.841992] rtc0: alarms up to one month, 242 bytes nvram, hpet irqs
[ 0.842083] device-mapper: uevent: version 1.0.3
[ 0.842156] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: <email address hidden>
[ 0.842218] device-mapper: multipath: version 1.1.0 loaded
[ 0.842221] device-mapper: multipath round-robin: version 1.0.0 loaded
[ 0.842322] EISA: Probing bus 0 at eisa.0
[ 0.842348] EISA: Detected 0 cards.
[ 0.842419] cpuidle: using governor ladder
[ 0.842421] cpuidle: using governor menu
[ 0.842871] TCP cubic registered
[ 0.842873] IPv6: Loaded, but administratively disabled, reboot required to enable
[ 0.842877] NET: Registered protocol family 17
[ 0.842894] Bluetooth: L2CAP ver 2.13
[ 0.842895] Bluetooth: L2CAP socket layer initialized
[ 0.842898] Bluetooth: SCO (Voice Link) ver 0.6
[ 0.842899] Bluetooth: SCO socket layer initialized
[ 0.842924] Bluetooth: RFCOMM TTY layer initialized
[ 0.842927] Bluetooth: RFCOMM socket layer initialized
[ 0.842929] Bluetooth: RFCOMM ver 1.11
[ 0.843437] Using IPI No-Shortcut mode
[ 0.843497] PM: Resume from disk failed.
[ 0.843509] registered taskstats version 1
[ 0.843617] Magic number: 1:734:307
[ 0.843633] tty tty36: hash matches
[ 0.843677] rtc_cmos 00:04: setting system clock to 2009-11-03 02:19:33 UTC (1257214773)
[ 0.843680] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 0.843682] EDD information not available.
[ 1.138671] ata4: SATA link down (SStatus 0 SControl 300)
[ 1.149343] ata3: SATA link down (SStatus 0 SControl 300)
[ 1.388026] usb 4-1: new low speed USB device using uhci_hcd and address 2
[ 1.556728] usb 4-1: configuration #1 chosen from 1 choice
[ 1.616208] ata1.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.616222] ata1.01: SATA link down (SStatus 0 SControl 300)
[ 1.616400] ata2.00: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.616412] ata2.01: SATA link down (SStatus 0 SControl 300)
[ 1.616422] ata2.01: link offline, clearing class 3 to NONE
[ 1.624327] ata2.00: ATAPI: TSSTcorp DVD+/-RW TS-H653B, D300, max UDMA/100
[ 1.624341] ata2.00: applying bridge limits
[ 1.640484] ata2.00: configured for UDMA/100
[ 1.640552] ata1.00: ATA-8: SAMSUNG HD321KJ, CP100-13, max UDMA7
[ 1.640555] ata1.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 1.648373] ata1.00: configured for UDMA/133
[ 1.648545] scsi 0:0:0:0: Direct-Access ATA SAMSUNG HD321KJ CP10 PQ: 0 ANSI: 5
[ 1.648677] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 1.648711] sd 0:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB)
[ 1.648754] sd 0:0:0:0: [sda] Write Protect is off
[ 1.648757] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.648778] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.648894] sda:
[ 1.649749] scsi 1:0:0:0: CD-ROM TSSTcorp DVD+-RW TS-H653B D300 PQ: 0 ANSI: 5
[ 1.654087] sr0: scsi3-mmc drive: 48x/48x writer cd/rw xa/form2 cdda tray
[ 1.654092] Uniform CD-ROM driver Revision: 3.20
[ 1.654216] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 1.654262] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 1.657898] sda1 sda2 sda3 < sda5 sda6 sda7 sda8 >
[ 1.718360] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.718378] Freeing unused kernel memory: 540k freed
[ 1.718678] Write protecting the kernel text: 4568k
[ 1.718719] Write protecting the kernel read-only data: 1836k
[ 1.800020] usb 5-1: new low speed USB device using uhci_hcd and address 2
[ 1.818783] Linux agpgart interface v0.103
[ 1.821264] agpgart-intel 0000:00:00.0: Intel G33 Chipset
[ 1.821756] agpgart-intel 0000:00:00.0: detected 7164K stolen memory
[ 1.824854] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
[ 1.855039] [drm] Initialized drm 1.1.0 20060810
[ 1.858157] e1000e: Intel(R) PRO/1000 Network Driver - 1.0.2-k2
[ 1.858160] e1000e: Copyright (c) 1999-2008 Intel Corporation.
[ 1.858219] alloc irq_desc for 20 on node -1
[ 1.858221] alloc kstat_irqs on node -1
[ 1.858230] e1000e 0000:00:19.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 1.858239] e1000e 0000:00:19.0: pci_enable_pcie_error_reporting failed 0xfffffffb
[ 1.858244] e1000e 0000:00:19.0: setting latency timer to 64
[ 1.858333] alloc irq_desc for 25 on node -1
[ 1.858335] alloc kstat_irqs on node -1
[ 1.858346] e1000e 0000:00:19.0: irq 25 for MSI/MSI-X
[ 1.895500] Floppy drive(s): fd0 is 1.44M
[ 1.912266] FDC 0 is a post-1991 82077
[ 1.919666] usbcore: registered new interface driver hiddev
[ 1.932931] input: USB Optical Mouse as /devices/pci0000:00/0000:00:1a.1/usb4/4-1/4-1:1.0/input/input3
[ 1.933152] generic-usb 0003:0461:4D15.0001: input,hidraw0: USB HID v1.11 Mouse [USB Optical Mouse] on usb-0000:00:1a.1-1/input0
[ 1.933166] usbcore: registered new interface driver usbhid
[ 1.933169] usbhid: v2.6:USB HID core driver
[ 1.988990] usb 5-1: configuration #1 chosen from 1 choice
[ 2.005425] 0000:00:19.0: eth0: (PCI Express:2.5GB/s:Width x1) 00:1d:09:7c:d1:8f
[ 2.005428] 0000:00:19.0: eth0: Intel(R) PRO/10/100 Network Connection
[ 2.005456] 0000:00:19.0: eth0: MAC: 7, PHY: 7, PBA No: ffffff-0ff
[ 2.007612] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 2.007617] i915 0000:00:02.0: setting latency timer to 64
[ 2.008886] mtrr: no more MTRRs available
[ 2.008890] [drm] MTRR allocation failed. Graphics performance may suffer.
[ 2.009029] alloc irq_desc for 26 on node -1
[ 2.009032] alloc kstat_irqs on node -1
[ 2.009049] i915 0000:00:02.0: irq 26 for MSI/MSI-X
[ 2.017170] input: Dell Dell USB Keyboard as /devices/pci0000:00/0000:00:1a.2/usb5/5-1/5-1:1.0/input/input4
[ 2.017235] generic-usb 0003:413C:2003.0002: input,hidraw1: USB HID v1.10 Keyboard [Dell Dell USB Keyboard] on usb-0000:00:1a.2-1/input0
[ 2.126920] [drm] fb0: inteldrmfb frame buffer device
[ 2.126972] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 2.192996] [drm] DAC-6: set mode 1680x1050 11
[ 2.219150] Console: switching to colour frame buffer device 210x65
[ 2.488156] PM: Starting manual resume from disk
[ 2.488160] PM: Resume from partition 8:2
[ 2.488162] PM: Checking hibernation image.
[ 2.488329] PM: Resume from disk failed.
[ 2.511901] EXT4-fs (sda6): barriers enabled
[ 2.524397] kjournald2 starting: pid 390, dev sda6:8, commit interval 5 seconds
[ 2.524414] EXT4-fs (sda6): delayed allocation enabled
[ 2.524420] EXT4-fs: file extents enabled
[ 2.525063] EXT4-fs: mballoc enabled
[ 2.525075] EXT4-fs (sda6): mounted filesystem with ordered data mode
[ 2.994177] type=1505 audit(1257214775.648:2): operation="profile_load" pid=413 name=/usr/share/gdm/guest-session/Xsession
[ 2.996712] type=1505 audit(1257214775.652:3): operation="profile_load" pid=414 name=/sbin/dhclient3
[ 2.997398] type=1505 audit(1257214775.652:4): operation="profile_load" pid=414 name=/usr/lib/NetworkManager/nm-dhcp-client.action
[ 2.997764] type=1505 audit(1257214775.652:5): operation="profile_load" pid=414 name=/usr/lib/connman/scripts/dhclient-script
[ 3.019504] type=1505 audit(1257214775.672:6): operation="profile_load" pid=415 name=/usr/bin/evince
[ 3.029849] type=1505 audit(1257214775.684:7): operation="profile_load" pid=415 name=/usr/bin/evince-previewer
[ 3.035940] type=1505 audit(1257214775.688:8): operation="profile_load" pid=415 name=/usr/bin/evince-thumbnailer
[ 3.063888] type=1505 audit(1257214775.716:9): operation="profile_load" pid=417 name=/usr/lib/cups/backend/cups-pdf
[ 3.064677] type=1505 audit(1257214775.720:10): operation="profile_load" pid=417 name=/usr/sbin/cupsd
[ 3.834573] Adding 2064344k swap on /dev/sda2. Priority:-1 extents:1 across:2064344k
[ 4.006207] Adding 2064312k swap on /dev/sda8. Priority:-2 extents:1 across:2064312k
[ 4.275065] udev: starting version 147
[ 4.673334] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 5.054781] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[ 5.054955] CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use
[ 5.054957] nf_conntrack.acct=1 kernel parameter, acct=1 nf_conntrack module option or
[ 5.054959] sysctl net.netfilter.nf_conntrack_acct=1 to enable it.
[ 5.074816] EXT4-fs (sda6): internal journal on sda6:8
[ 5.371807] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
[ 5.567210] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 5.723593] EXT4-fs (sda5): barriers enabled
[ 5.727646] kjournald2 starting: pid 779, dev sda5:8, commit interval 5 seconds
[ 5.727899] EXT4-fs (sda5): internal journal on sda5:8
[ 5.727906] EXT4-fs (sda5): delayed allocation enabled
[ 5.727912] EXT4-fs: file extents enabled
[ 5.728170] EXT4-fs: mballoc enabled
[ 5.728183] EXT4-fs (sda5): mounted filesystem with ordered data mode
[ 5.806669] dell-wmi: No known WMI GUID found
[ 5.915375] EXT4-fs (sda7): barriers enabled
[ 5.923260] kjournald2 starting: pid 806, dev sda7:8, commit interval 5 seconds
[ 5.923531] EXT4-fs (sda7): internal journal on sda7:8
[ 5.923538] EXT4-fs (sda7): delayed allocation enabled
[ 5.923543] EXT4-fs: file extents enabled
[ 5.925557] EXT4-fs: mballoc enabled
[ 5.925571] EXT4-fs (sda7): mounted filesystem with ordered data mode
[ 5.954941] lp: driver loaded but no devices found
[ 7.410597] alloc irq_desc for 22 on node -1
[ 7.410601] alloc kstat_irqs on node -1
[ 7.410607] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 7.410640] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 7.479819] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input5
[ 7.891055] __ratelimit: 3 callbacks suppressed
[ 7.891058] type=1505 audit(1257236380.544:12): operation="profile_replace" pid=929 name=/usr/share/gdm/guest-session/Xsession
[ 7.892686] type=1505 audit(1257236380.548:13): operation="profile_replace" pid=930 name=/sbin/dhclient3
[ 7.893457] type=1505 audit(1257236380.548:14): operation="profile_replace" pid=930 name=/usr/lib/NetworkManager/nm-dhcp-client.action
[ 7.893827] type=1505 audit(1257236380.548:15): operation="profile_replace" pid=930 name=/usr/lib/connman/scripts/dhclient-script
[ 7.897309] type=1505 audit(1257236380.552:16): operation="profile_replace" pid=931 name=/usr/bin/evince
[ 7.907891] type=1505 audit(1257236380.560:17): operation="profile_replace" pid=931 name=/usr/bin/evince-previewer
[ 7.914008] type=1505 audit(1257236380.568:18): operation="profile_replace" pid=931 name=/usr/bin/evince-thumbnailer
[ 7.922712] type=1505 audit(1257236380.576:19): operation="profile_replace" pid=933 name=/usr/lib/cups/backend/cups-pdf
[ 7.923497] type=1505 audit(1257236380.576:20): operation="profile_replace" pid=933 name=/usr/sbin/cupsd
[ 7.925786] type=1505 audit(1257236380.580:21): operation="profile_replace" pid=934 name=/usr/sbin/tcpdump
[ 9.234045] ppdev: user-space parallel port driver
[ 10.859786] CPU0 attaching NULL sched-domain.
[ 10.859792] CPU1 attaching NULL sched-domain.
[ 10.876087] CPU0 attaching sched-domain:
[ 10.876092] domain 0: span 0-1 level MC
[ 10.876095] groups: 0 1
[ 10.876099] domain 1: span 0-1 level CPU
[ 10.876102] groups: 0-1 (__cpu_power = 2048)
[ 10.876107] CPU1 attaching sched-domain:
[ 10.876109] domain 0: span 0-1 level MC
[ 10.876111] groups: 1 0
[ 10.876115] domain 1: span 0-1 level CPU
[ 10.876117] groups: 0-1 (__cpu_power = 2048)
[ 11.584775] e1000e 0000:00:19.0: irq 25 for MSI/MSI-X
[ 11.640579] e1000e 0000:00:19.0: irq 25 for MSI/MSI-X
[ 13.096775] e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: None
[ 13.096779] 0000:00:19.0: eth0: 10/100 speed: disabling TSO
[ 16.551514] CPU0 attaching NULL sched-domain.
[ 16.551519] CPU1 attaching NULL sched-domain.
[ 16.568072] CPU0 attaching sched-domain:
[ 16.568077] domain 0: span 0-1 level MC
[ 16.568079] groups: 0 1
[ 16.568085] CPU1 attaching sched-domain:
[ 16.568087] domain 0: span 0-1 level MC
[ 16.568089] groups: 1 0

00:00.0 Host bridge [0600]: Intel Corporation 82G33/G31/P35/P31 Express DRAM Controller [8086:29c0] (rev 02)
 Subsystem: Dell Device [1028:020d]
 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
 Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
 Latency: 0
 Capabilities: [e0] Vendor Specific Information <?>
 Kernel driver in use: agpgart-intel
 Kernel modules: intel-agp

00:01.0 PCI bridge [0604]: Intel Corporation 82G33/G31/P35/P31 Express PCI Express Root Port [8086:29c1] (rev 02)
 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
 Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
 Latency: 0, Cache Line Size: 64 bytes
 Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
 I/O behind bridge: 0000c000-0000cfff
 Memory behind bridge: fde00000-fdefffff
 Prefetchable memory behind bridge: 00000000fda00000-00000000fdafffff
 Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
 BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
  PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
 Capabilities: [88] Subsystem: Dell Device [1028:020d]
 Capabilities: [80] Power Management version 3
  Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
  Status: D0 PME-Enable- DSel=0 DScale=0 PME-
 Capabilities: [90] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable+
  Address: fee0300c Data: 4151
 Capabilities: [a0] Express (v1) Root Port (Slot+), MSI 00
  DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
   ExtTag- RBE+ FLReset-
  DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
   RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
   MaxPayload 128 bytes, MaxReadReq 128 bytes
  DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
  LnkCap: Port #2, Speed 2.5GT/s, Width x16, ASPM L0s L1, Latency L0 <1us, L1 <4us
   ClockPM- Suprise- LLActRep- BwNot-
  LnkCtl: ASPM Disabled; RCB 64 bytes Disabled+ Retrain- CommClk-
   ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
  LnkSta: Speed 2.5GT/s, Width x0, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
  SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surpise-
   Slot # 0, PowerLimit 0.000000; Interlock- NoCompl+
  SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
   Control: AttnInd Off, PwrInd On, Power- Interlock-
  SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet- Interlock-
   Changed: MRL- PresDet- LinkState-
  RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
  RootCap: CRSVisible-
  RootSta: PME ReqID 0000, PMEStatus- PMEPending-
 Capabilities: [100] Virtual Channel <?>
 Capabilities: [140] Root Complex Link <?>
 Kernel driver in use: pcieport-driver
 Kernel modules: shpchp

00:02.0 VGA compatible controller [0300]: Intel Corporation 82G33/G31 Express Integrated Graphics Controller [8086:29c2] (rev 02)
 Subsystem: Dell Device [1028:020d]
 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
 Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
 Latency: 0
 Interrupt: pin A routed to IRQ 26
 Region 0: Memory at fdf00000 (32-bit, non-prefetchable) [size=512K]
 Region 1: I/O ports at ff00 [size=8]
 Region 2: Memory at d0000000 (32-bit, prefetchable) [size=256M]
 Region 3: Memory at fdb00000 (32-bit, non-prefetchable) [size=1M]
 Capabilities: [90] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable+
  Address: fee0300c Data: 4189
 Capabilities: [d0] Power Management version 2
  Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
  Status: D0 PME-Enable- DSel=0 DScale=0 PME-
 Kernel driver in use: i915
 Kernel modules: i915

00:19.0 Ethernet controller [0200]: Intel Corporation 82562V-2 10/100 Network Connection [8086:10c0] (rev 02)
 Subsystem: Dell Device [1028:020d]
 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
 Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
 Latency: 0
 Interrupt: pin A routed to IRQ 25
 Region 0: Memory at fdfc0000 (32-bit, non-prefetchable) [size=128K]
 Region 1: Memory at fdfff000 (32-bit, non-prefetchable) [size=4K]
 Region 2: I/O ports at fe00 [size=32]
 Capabilities: [c8] Power Management version 2
  Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
  Status: D0 PME-Enable- DSel=0 DScale=1 PME-
 Capabilities: [d0] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable+
  Address: 00000000fee0300c Data: 41a1
 Capabilities: [e0] Vendor Specific Information <?>
 Kernel driver in use: e1000e
 Kernel modules: e1000e

00:1a.0 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #4 [8086:2937] (rev 02)
 Subsystem: Dell Device [1028:020d]
 Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
 Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
 Latency: 0
 Interrupt: pin A routed to IRQ 16
 Region 4: I/O ports at fd00 [size=32]
 Capabilities: [50] Vendor Specific Information <?>
 Kernel driver in use: uhci_hcd

00:1a.1 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #5 [8086:2938] (rev 02)
 Subsystem: Dell Device [1028:020d]
 Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
 Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
 Latency: 0
 Interrupt: pin B routed to IRQ 21
 Region 4: I/O ports at fc00 [size=32]
 Capabilities: [50] Vendor Specific Information <?>
 Kernel driver in use: uhci_hcd

00:1a.2 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #6 [8086:2939] (rev 02)
 Subsystem: Dell Device [1028:020d]
 Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
 Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
 Latency: 0
 Interrupt: pin D routed to IRQ 19
 Region 4: I/O ports at fb00 [size=32]
 Capabilities: [50] Vendor Specific Information <?>
 Kernel driver in use: uhci_hcd

00:1a.7 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #2 [8086:293c] (rev 02) (prog-if 20)
 Subsystem: Dell Device [1028:020d]
 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
 Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
 Latency: 0
 Interrupt: pin C routed to IRQ 18
 Region 0: Memory at fdffe000 (32-bit, non-prefetchable) [size=1K]
 Capabilities: [50] Power Management version 2
  Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
  Status: D0 PME-Enable- DSel=0 DScale=0 PME-
 Capabilities: [58] Debug port: BAR=1 offset=00a0
 Capabilities: [98] Vendor Specific Information <?>
 Kernel driver in use: ehci_hcd

00:1b.0 Audio device [0403]: Intel Corporation 82801I (ICH9 Family) HD Audio Controller [8086:293e] (rev 02)
 Subsystem: Dell Device [1028:020d]
 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
 Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
 Latency: 0, Cache Line Size: 64 bytes
 Interrupt: pin A routed to IRQ 22
 Region 0: Memory at fdff4000 (64-bit, non-prefetchable) [size=16K]
 Capabilities: [50] Power Management version 2
  Flags: PMEClk- DSI- D1- D2- AuxCurrent=55mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
  Status: D0 PME-Enable- DSel=0 DScale=0 PME-
 Capabilities: [60] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable-
  Address: 0000000000000000 Data: 0000
 Capabilities: [70] Express (v1) Root Complex Integrated Endpoint, MSI 00
  DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
   ExtTag- RBE- FLReset+
  DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
   RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+
   MaxPayload 128 bytes, MaxReadReq 128 bytes
  DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
  LnkCap: Port #0, Speed unknown, Width x0, ASPM unknown, Latency L0 <64ns, L1 <1us
   ClockPM- Suprise- LLActRep- BwNot-
  LnkCtl: ASPM Disabled; Disabled- Retrain- CommClk-
   ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
  LnkSta: Speed unknown, Width x0, TrErr- Train- SlotClk- DLActive- BWMgmt- ABWMgmt-
 Capabilities: [100] Virtual Channel <?>
 Capabilities: [130] Root Complex Link <?>
 Kernel driver in use: HDA Intel
 Kernel modules: snd-hda-intel

00:1d.0 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #1 [8086:2934] (rev 02)
 Subsystem: Dell Device [1028:020d]
 Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
 Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
 Latency: 0
 Interrupt: pin A routed to IRQ 23
 Region 4: I/O ports at fa00 [size=32]
 Capabilities: [50] Vendor Specific Information <?>
 Kernel driver in use: uhci_hcd

00:1d.1 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #2 [8086:2935] (rev 02)
 Subsystem: Dell Device [1028:020d]
 Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
 Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
 Latency: 0
 Interrupt: pin B routed to IRQ 19
 Region 4: I/O ports at f900 [size=32]
 Capabilities: [50] Vendor Specific Information <?>
 Kernel driver in use: uhci_hcd

00:1d.2 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #3 [8086:2936] (rev 02)
 Subsystem: Dell Device [1028:020d]
 Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
 Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
 Latency: 0
 Interrupt: pin C routed to IRQ 18
 Region 4: I/O ports at f800 [size=32]
 Capabilities: [50] Vendor Specific Information <?>
 Kernel driver in use: uhci_hcd

00:1d.7 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #1 [8086:293a] (rev 02) (prog-if 20)
 Subsystem: Dell Device [1028:020d]
 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
 Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
 Latency: 0
 Interrupt: pin A routed to IRQ 23
 Region 0: Memory at fdffd000 (32-bit, non-prefetchable) [size=1K]
 Capabilities: [50] Power Management version 2
  Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
  Status: D0 PME-Enable- DSel=0 DScale=0 PME-
 Capabilities: [58] Debug port: BAR=1 offset=00a0
 Capabilities: [98] Vendor Specific Information <?>
 Kernel driver in use: ehci_hcd

00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev 92) (prog-if 01)
 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
 Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
 Latency: 0
 Bus: primary=00, secondary=02, subordinate=02, sec-latency=32
 I/O behind bridge: 0000d000-0000dfff
 Memory behind bridge: fdd00000-fddfffff
 Prefetchable memory behind bridge: 00000000fdc00000-00000000fdcfffff
 Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
 BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
  PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
 Capabilities: [50] Subsystem: Dell Device [1028:020d]

00:1f.0 ISA bridge [0601]: Intel Corporation 82801IR (ICH9R) LPC Interface Controller [8086:2916] (rev 02)
 Subsystem: Dell Device [1028:020d]
 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
 Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
 Latency: 0
 Capabilities: [e0] Vendor Specific Information <?>
 Kernel modules: iTCO_wdt

00:1f.2 IDE interface [0101]: Intel Corporation 82801IR/IO/IH (ICH9R/DO/DH) 4 port SATA IDE Controller [8086:2920] (rev 02) (prog-if 8f [Master SecP SecO PriP PriO])
 Subsystem: Dell Device [1028:020d]
 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
 Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
 Latency: 0
 Interrupt: pin A routed to IRQ 19
 Region 0: I/O ports at f700 [size=8]
 Region 1: I/O ports at f600 [size=4]
 Region 2: I/O ports at f500 [size=8]
 Region 3: I/O ports at f400 [size=4]
 Region 4: I/O ports at f300 [size=16]
 Region 5: I/O ports at f200 [size=16]
 Capabilities: [70] Power Management version 3
  Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
  Status: D0 PME-Enable- DSel=0 DScale=0 PME-
 Capabilities: [b0] Vendor Specific Information <?>
 Kernel driver in use: ata_piix

00:1f.3 SMBus [0c05]: Intel Corporation 82801I (ICH9 Family) SMBus Controller [8086:2930] (rev 02)
 Subsystem: Dell Device [1028:020d]
 Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
 Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
 Interrupt: pin B routed to IRQ 11
 Region 0: Memory at fdffc000 (64-bit, non-prefetchable) [size=256]
 Region 4: I/O ports at 0500 [size=32]
 Kernel modules: i2c-i801

00:1f.5 IDE interface [0101]: Intel Corporation 82801I (ICH9 Family) 2 port SATA IDE Controller [8086:2926] (rev 02) (prog-if 85 [Master SecO PriO])
 Subsystem: Dell Device [1028:020d]
 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
 Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
 Latency: 0
 Interrupt: pin A routed to IRQ 19
 Region 0: I/O ports at f000 [size=8]
 Region 1: I/O ports at ef00 [size=4]
 Region 2: I/O ports at ee00 [size=8]
 Region 3: I/O ports at ed00 [size=4]
 Region 4: I/O ports at ec00 [size=16]
 Region 5: I/O ports at eb00 [size=16]
 Capabilities: [70] Power Management version 3
  Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
  Status: D0 PME-Enable- DSel=0 DScale=0 PME-
 Capabilities: [b0] Vendor Specific Information <?>
 Kernel driver in use: ata_piix

02:00.0 Communication controller [0780]: Conexant Systems, Inc. HSF 56k Data/Fax Modem [14f1:2f20]
 Subsystem: Conexant Systems, Inc. Device [14f1:200f]
 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
 Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
 Latency: 0
 Interrupt: pin A routed to IRQ 4
 Region 0: Memory at fddf0000 (32-bit, non-prefetchable) [size=64K]
 Region 1: I/O ports at df00 [size=8]
 Capabilities: [40] Power Management version 2
  Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold+)
  Status: D0 PME-Enable- DSel=0 DScale=0 PME-

ProblemType: KernelOops
Annotation: Your system might become unstable now and might need to be restarted.
Architecture: i386
AudioDevicesInUse:
 USER PID ACCESS COMMAND
 /dev/snd/controlC0: rickey 1738 F.... pulseaudio
CRDA: Error: [Errno 2] No such file or directory
Card0.Amixer.info:
 Card hw:0 'Intel'/'HDA Intel at 0xfdff4000 irq 22'
   Mixer name : 'Realtek ALC888'
   Components : 'HDA:10ec0888,1028020d,00100001'
   Controls : 40
   Simple ctrls : 22
Date: Mon Nov 2 16:46:47 2009
DistroRelease: Ubuntu 10.04
Failure: oops
HibernationDevice: RESUME=UUID=075f040b-bfd8-4d29-96c8-88eb8af34f58
InstallationMedia: Ubuntu 9.10 "Karmic Koala" - Release Candidate i386 (20091020.3)
IwConfig:
 lo no wireless extensions.

 eth0 no wireless extensions.
MachineType: Dell Inc. Inspiron 530
Package: linux-image-2.6.31-14-generic 2.6.31-14.48
ProcCmdLine: BOOT_IMAGE=/vmlinuz-2.6.31-14-generic root=UUID=f9e3c86c-0f22-40d9-8e5b-9e68d05a8063 ro ipv6.disable=1 quiet splash
ProcVersionSignature: Ubuntu 2.6.31-14.48-generic
RelatedPackageVersions:
 linux-backports-modules-2.6.31-14-generic N/A
 linux-firmware 1.24
RfKill:

SourcePackage: linux
Tags: kernel-oops
Title: WARNING: at /build/buildd/linux-2.6.31/kernel/power/suspend_test.c:52 suspend_test_finish+0x80/0x90()
Uname: Linux 2.6.31-14-generic i686
dmi.bios.date: 02/24/2009
dmi.bios.vendor: Dell Inc.
dmi.bios.version: 1.0.18
dmi.board.name: 0RY007
dmi.board.vendor: Dell Inc.
dmi.chassis.type: 3
dmi.chassis.vendor: Dell Inc.
dmi.chassis.version: OEM
dmi.modalias: dmi:bvnDellInc.:bvr1.0.18:bd02/24/2009:svnDellInc.:pnInspiron530:pvr:rvnDellInc.:rn0RY007:rvr:cvnDellInc.:ct3:cvrOEM:
dmi.product.name: Inspiron 530
dmi.sys.vendor: Dell Inc.

[Leann Ogasawara (leannogasawara)]

Hi Rickey,

The warning reported here typically indicates that it took longer for your system to resume from suspend than expected. I believe there is a 5 sec barrier which your system likely exceeded. Typically you'll see something similar to "PM: resume devices took 8.664 seconds" in your dmesg output when this happens. A patch to prevent this warning has been applied via bug 464552. As a result I'm marking this as a duplicate to bug 464552. Please continue to track this issue at that report. Thanks!

[This is an automated message. Apologies if it has reached you inappropriately.]