[   14.751077] ppdev: user-space parallel port driver
[   16.453197] sky2 eth0: enabling interface
[   16.453362] ADDRCONF(NETDEV_UP): eth0: link is not ready
[  104.725873] sky2 eth0: Link is up at 100 Mbps, full duplex, flow control rx
[  104.726026] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[  111.072284] usb 5-1: new low speed USB device using uhci_hcd and address 2
[  111.249615] usb 5-1: configuration #1 chosen from 1 choice
[  111.290854] usbcore: registered new interface driver hiddev
[  111.303865] input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:1d.0/usb5/5-1/5-1:1.0/input/input14
[  111.304101] generic-usb 0003:046D:C03D.0001: input,hidraw0: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:1d.0-1/input0
[  111.304142] usbcore: registered new interface driver usbhid
[  111.304149] usbhid: v2.6:USB HID core driver
[  114.924053] eth0: no IPv6 routers present
[  115.464260] usb 5-2: new low speed USB device using uhci_hcd and address 3
[  115.642616] usb 5-2: configuration #1 chosen from 1 choice
[  115.660564] input: BTC USB Multimedia Keyboard as /devices/pci0000:00/0000:00:1d.0/usb5/5-2/5-2:1.0/input/input15
[  115.660639] generic-usb 0003:046D:C313.0002: input,hidraw1: USB HID v1.10 Keyboard [BTC USB Multimedia Keyboard] on usb-0000:00:1d.0-2/input0
[  115.704605] input: BTC USB Multimedia Keyboard as /devices/pci0000:00/0000:00:1d.0/usb5/5-2/5-2:1.1/input/input16
[  115.704880] generic-usb 0003:046D:C313.0003: input,hiddev96,hidraw2: USB HID v1.10 Device [BTC USB Multimedia Keyboard] on usb-0000:00:1d.0-2/input1
[  198.984231] hda-intel: azx_get_response timeout, switching to polling mode: last cmd=0x20af0900
[  398.081017] CE: hpet increasing min_delta_ns to 15000 nsec
[  409.073391] CE: hpet increasing min_delta_ns to 22500 nsec
[  581.728148] hub 5-0:1.0: port 1 disabled by hub (EMI?), re-enabling...
[  581.728161] usb 5-1: USB disconnect, address 2
[  581.996079] usb 5-1: new low speed USB device using uhci_hcd and address 4
[  582.168593] usb 5-1: configuration #1 chosen from 1 choice
[  582.191590] input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:1d.0/usb5/5-1/5-1:1.0/input/input17
[  582.191674] generic-usb 0003:046D:C03D.0004: input,hidraw0: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:1d.0-1/input0
[  582.191728] hub 5-0:1.0: port 2 disabled by hub (EMI?), re-enabling...
[  582.191732] usb 5-2: USB disconnect, address 3
[  582.492348] usb 5-2: new low speed USB device using uhci_hcd and address 5
[  582.672677] usb 5-2: configuration #1 chosen from 1 choice
[  582.691666] input: BTC USB Multimedia Keyboard as /devices/pci0000:00/0000:00:1d.0/usb5/5-2/5-2:1.0/input/input18
[  582.691729] generic-usb 0003:046D:C313.0005: input,hidraw1: USB HID v1.10 Keyboard [BTC USB Multimedia Keyboard] on usb-0000:00:1d.0-2/input0
[  582.735469] input: BTC USB Multimedia Keyboard as /devices/pci0000:00/0000:00:1d.0/usb5/5-2/5-2:1.1/input/input19
[  582.735584] generic-usb 0003:046D:C313.0006: input,hiddev96,hidraw2: USB HID v1.10 Device [BTC USB Multimedia Keyboard] on usb-0000:00:1d.0-2/input1
[  582.735951] hub 5-0:1.0: port 1 disabled by hub (EMI?), re-enabling...
[  582.735956] usb 5-1: USB disconnect, address 4
[  583.005055] usb 5-1: new low speed USB device using uhci_hcd and address 6
[  583.186714] usb 5-1: configuration #1 chosen from 1 choice
[  583.204592] input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:1d.0/usb5/5-1/5-1:1.0/input/input20
[  583.204678] generic-usb 0003:046D:C03D.0007: input,hidraw0: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:1d.0-1/input0
[  681.660014] CE: hpet increasing min_delta_ns to 33750 nsec
[ 1258.768138] hub 5-0:1.0: port 1 disabled by hub (EMI?), re-enabling...
[ 1258.768146] usb 5-1: USB disconnect, address 6
[ 1259.044113] usb 5-1: new low speed USB device using uhci_hcd and address 7
[ 1259.220540] usb 5-1: configuration #1 chosen from 1 choice
[ 1259.241699] input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:1d.0/usb5/5-1/5-1:1.0/input/input21
[ 1259.241787] generic-usb 0003:046D:C03D.0008: input,hidraw0: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:1d.0-1/input0
[ 3063.157909] rhythmbox-metad[6947]: segfault at 4 ip 014e82d3 sp b6e85c50 error 4 in libavcodec.so.52.20.0[1163000+520000]
[ 3520.528077] hub 5-0:1.0: port 1 disabled by hub (EMI?), re-enabling...
[ 3520.528083] usb 5-1: USB disconnect, address 7
[ 3520.816052] usb 5-1: new low speed USB device using uhci_hcd and address 8
[ 3521.016822] usb 5-1: configuration #1 chosen from 1 choice
[ 3521.032981] input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:1d.0/usb5/5-1/5-1:1.0/input/input22
[ 3521.033078] generic-usb 0003:046D:C03D.0009: input,hidraw0: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:1d.0-1/input0
[ 3521.276095] hub 5-0:1.0: port 1 disabled by hub (EMI?), re-enabling...
[ 3521.276101] usb 5-1: USB disconnect, address 8
[ 3521.549052] usb 5-1: new low speed USB device using uhci_hcd and address 9
[ 3521.739822] usb 5-1: configuration #1 chosen from 1 choice
[ 3521.756927] input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:1d.0/usb5/5-1/5-1:1.0/input/input23
[ 3521.757821] generic-usb 0003:046D:C03D.000A: input,hidraw0: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:1d.0-1/input0
[ 3524.500056] hub 5-0:1.0: port 1 disabled by hub (EMI?), re-enabling...
[ 3524.500062] usb 5-1: USB disconnect, address 9
[ 3524.793072] usb 5-1: new low speed USB device using uhci_hcd and address 10
[ 3524.997385] usb 5-1: configuration #1 chosen from 1 choice
[ 3525.019376] input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:1d.0/usb5/5-1/5-1:1.0/input/input24
[ 3525.019462] generic-usb 0003:046D:C03D.000B: input,hidraw0: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:1d.0-1/input0
[ 3529.952072] hub 5-0:1.0: port 1 disabled by hub (EMI?), re-enabling...
[ 3529.952078] usb 5-1: USB disconnect, address 10
[ 3530.221470] usb 5-1: new low speed USB device using uhci_hcd and address 11
[ 3530.415945] usb 5-1: configuration #1 chosen from 1 choice
[ 3530.435592] input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:1d.0/usb5/5-1/5-1:1.0/input/input25
[ 3530.435812] generic-usb 0003:046D:C03D.000C: input,hidraw0: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:1d.0-1/input0
[ 5778.786173] rhythmbox-metad[7681]: segfault at 3 ip 086c20e6 sp b7412848 error 6 in libjpeg.so.62.0.0[86ac000+22000]
[ 6186.167578] rhythmbox-metad[9180]: segfault at 3 ip 00f860e6 sp b7300848 error 6 in libjpeg.so.62.0.0[f70000+22000]
[ 9453.915360] sky2 eth0: Link is down.
[ 9468.435030] sky2 eth0: Link is up at 100 Mbps, full duplex, flow control rx
[ 9715.794378] rhythmbox-metad[12114]: segfault at 800000e8 ip 01608038 sp b6dc6c30 error 4 in libavcodec.so.52.20.0[1350000+520000]
[11346.980125] CE: hpet increasing min_delta_ns to 50624 nsec
[15689.991410] process `skype' is using obsolete setsockopt SO_BSDCOMPAT
[50247.996178] sky2 eth0: disabling interface
[50250.486765] PM: Syncing filesystems ... done.
[50250.496467] PM: Preparing system for mem sleep
[50250.496471] Freezing user space processes ... (elapsed 0.00 seconds) done.
[50250.503403] Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done.
[50250.503438] PM: Entering mem sleep
[50250.503449] Suspending console(s) (use no_console_suspend to debug)
[50250.600246] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[50250.707342] sd 0:0:0:0: [sda] Stopping disk
[50252.157836] sdhci-pci 0000:03:09.1: PME# disabled
[50252.157842] sdhci-pci 0000:03:09.1: PCI INT B disabled
[50252.208366] sky2 0000:09:00.0: PME# disabled
[50252.340384] ata5: port disabled. ignoring.
[50252.340459] ata_piix 0000:00:1f.1: PCI INT A disabled
[50252.340470] ehci_hcd 0000:00:1d.7: PCI INT A disabled
[50252.340478] uhci_hcd 0000:00:1d.2: PCI INT C disabled
[50252.340485] uhci_hcd 0000:00:1d.1: PCI INT B disabled
[50252.340492] uhci_hcd 0000:00:1d.0: PCI INT A disabled
[50252.612246] HDA Intel 0000:00:1b.0: PCI INT A disabled
[50252.628243] ehci_hcd 0000:00:1a.7: PCI INT C disabled
[50252.628253] uhci_hcd 0000:00:1a.1: PCI INT B disabled
[50252.628263] uhci_hcd 0000:00:1a.0: PCI INT A disabled
[50252.628342] PM: suspend devices took 2.128 seconds
[50252.628468] ricoh-mmc: Suspending.
[50252.628477] ricoh-mmc: Controller is now re-enabled.
[50252.628732] ehci_hcd 0000:00:1d.7: PME# disabled
[50252.644296] ehci_hcd 0000:00:1a.7: PME# disabled
[50252.664271] ACPI: Preparing to enter system sleep state S3
[50252.665760] Disabling non-boot CPUs ...
[50252.668059] CPU 1 is now offline
[50252.668061] SMP alternatives: switching to UP code
[50252.673189] CPU0 attaching NULL sched-domain.
[50252.673192] CPU1 attaching NULL sched-domain.
[50252.673196] CPU0 attaching NULL sched-domain.
[50252.673343] CPU1 is down
[50252.673386] Extended CMOS year: 2000
[50252.673386] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[50252.673386] Back to C!
[50252.673386] CPU0: Thermal LVT vector (0xfa) already installed
[50252.673386] Extended CMOS year: 2000
[50252.673386] Enabling non-boot CPUs ...
[50252.673386] SMP alternatives: switching to SMP code
[50252.678503] Booting processor 1 APIC 0x1 ip 0x6000
[50252.673059] Initializing CPU#1
[50252.673059] Calibrating delay using timer specific routine.. 4788.01 BogoMIPS (lpj=9576024)
[50252.673059] CPU: L1 I cache: 32K, L1 D cache: 32K
[50252.673059] CPU: L2 cache: 3072K
[50252.673059] CPU: Physical Processor ID: 0
[50252.673059] CPU: Processor Core ID: 1
[50252.673059] mce: CPU supports 6 MCE banks
[50252.673059] CPU1: Thermal monitoring enabled (TM2)
[50252.673059] x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106
[50252.769616] CPU1: Intel(R) Core(TM)2 Duo CPU     T8300  @ 2.40GHz stepping 06
[50252.769681] CPU0 attaching NULL sched-domain.
[50252.772024] Switched to high resolution mode on CPU 1
[50252.784016] CPU0 attaching sched-domain:
[50252.784019]  domain 0: span 0-1 level MC
[50252.784021]   groups: 0 1
[50252.784024] CPU1 attaching sched-domain:
[50252.784025]  domain 0: span 0-1 level MC
[50252.784027]   groups: 1 0
[50252.785016] CPU1 is up
[50252.785018] ACPI: Waking up from system sleep state S3
[50252.794025] pcieport-driver 0000:00:01.0: restoring config space at offset 0xf (was 0x100, writing 0x1a0100)
[50252.794031] pcieport-driver 0000:00:01.0: restoring config space at offset 0xa (was 0xf, writing 0x0)
[50252.794034] pcieport-driver 0000:00:01.0: restoring config space at offset 0x9 (was 0x1fff1, writing 0xeff1e001)
[50252.794037] pcieport-driver 0000:00:01.0: restoring config space at offset 0x8 (was 0xfea0fa00, writing 0xf6e0f200)
[50252.794041] pcieport-driver 0000:00:01.0: restoring config space at offset 0x7 (was 0xf0, writing 0xe0e0)
[50252.794044] pcieport-driver 0000:00:01.0: restoring config space at offset 0x6 (was 0x0, writing 0x10100)
[50252.794048] pcieport-driver 0000:00:01.0: restoring config space at offset 0x3 (was 0x10000, writing 0x10010)
[50252.794052] pcieport-driver 0000:00:01.0: restoring config space at offset 0x1 (was 0x100007, writing 0x100507)
[50252.794071] uhci_hcd 0000:00:1a.0: restoring config space at offset 0xf (was 0x100, writing 0x10b)
[50252.794085] uhci_hcd 0000:00:1a.0: restoring config space at offset 0x8 (was 0x1, writing 0x6f21)
[50252.794099] uhci_hcd 0000:00:1a.0: restoring config space at offset 0x1 (was 0x2800000, writing 0x2800001)
[50252.794110] uhci_hcd 0000:00:1a.1: restoring config space at offset 0xf (was 0x200, writing 0x20a)
[50252.794123] uhci_hcd 0000:00:1a.1: restoring config space at offset 0x8 (was 0x1, writing 0x6f01)
[50252.794137] uhci_hcd 0000:00:1a.1: restoring config space at offset 0x1 (was 0x2800000, writing 0x2800001)
[50252.794157] ehci_hcd 0000:00:1a.7: restoring config space at offset 0xf (was 0x300, writing 0x309)
[50252.794177] ehci_hcd 0000:00:1a.7: restoring config space at offset 0x4 (was 0x0, writing 0xfed1c400)
[50252.794185] ehci_hcd 0000:00:1a.7: restoring config space at offset 0x1 (was 0x2900000, writing 0x2900102)
[50252.794203] ehci_hcd 0000:00:1a.7: PME# disabled
[50252.794221] HDA Intel 0000:00:1b.0: restoring config space at offset 0xf (was 0x100, writing 0x10a)
[50252.794241] HDA Intel 0000:00:1b.0: restoring config space at offset 0x4 (was 0xfebfc004, writing 0xf6ffc004)
[50252.794246] HDA Intel 0000:00:1b.0: restoring config space at offset 0x3 (was 0x0, writing 0x10)
[50252.794253] HDA Intel 0000:00:1b.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100102)
[50252.794285] pcieport-driver 0000:00:1c.0: restoring config space at offset 0xf (was 0x100, writing 0x20100)
[50252.794297] pcieport-driver 0000:00:1c.0: restoring config space at offset 0x9 (was 0x10001, writing 0x1fff1)
[50252.794302] pcieport-driver 0000:00:1c.0: restoring config space at offset 0x8 (was 0x0, writing 0xf1f0f1f0)
[50252.794307] pcieport-driver 0000:00:1c.0: restoring config space at offset 0x7 (was 0x0, writing 0xd0d0)
[50252.794312] pcieport-driver 0000:00:1c.0: restoring config space at offset 0x6 (was 0x0, writing 0x90900)
[50252.794320] pcieport-driver 0000:00:1c.0: restoring config space at offset 0x3 (was 0x810000, writing 0x810010)
[50252.794327] pcieport-driver 0000:00:1c.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100407)
[50252.794375] pcieport-driver 0000:00:1c.1: restoring config space at offset 0xf (was 0x200, writing 0x20200)
[50252.794387] pcieport-driver 0000:00:1c.1: restoring config space at offset 0x9 (was 0x10001, writing 0x1fff1)
[50252.794392] pcieport-driver 0000:00:1c.1: restoring config space at offset 0x8 (was 0x0, writing 0xf1e0f1e0)
[50252.794398] pcieport-driver 0000:00:1c.1: restoring config space at offset 0x7 (was 0x0, writing 0xf0)
[50252.794403] pcieport-driver 0000:00:1c.1: restoring config space at offset 0x6 (was 0x0, writing 0xb0b00)
[50252.794411] pcieport-driver 0000:00:1c.1: restoring config space at offset 0x3 (was 0x810000, writing 0x810010)
[50252.794417] pcieport-driver 0000:00:1c.1: restoring config space at offset 0x1 (was 0x100000, writing 0x100507)
[50252.794465] pcieport-driver 0000:00:1c.4: restoring config space at offset 0xf (was 0x100, writing 0x20100)
[50252.794477] pcieport-driver 0000:00:1c.4: restoring config space at offset 0x9 (was 0x10001, writing 0xf011f001)
[50252.794482] pcieport-driver 0000:00:1c.4: restoring config space at offset 0x8 (was 0x0, writing 0xf1d0f1c0)
[50252.794487] pcieport-driver 0000:00:1c.4: restoring config space at offset 0x7 (was 0x0, writing 0xc0c0)
[50252.794492] pcieport-driver 0000:00:1c.4: restoring config space at offset 0x6 (was 0x0, writing 0xd0c00)
[50252.794500] pcieport-driver 0000:00:1c.4: restoring config space at offset 0x3 (was 0x810000, writing 0x810010)
[50252.794507] pcieport-driver 0000:00:1c.4: restoring config space at offset 0x1 (was 0x100000, writing 0x100407)
[50252.794564] uhci_hcd 0000:00:1d.0: restoring config space at offset 0x1 (was 0x2800005, writing 0x2800001)
[50252.794574] uhci_hcd 0000:00:1d.1: restoring config space at offset 0xf (was 0x200, writing 0x20a)
[50252.794588] uhci_hcd 0000:00:1d.1: restoring config space at offset 0x8 (was 0x1, writing 0x6f61)
[50252.794601] uhci_hcd 0000:00:1d.1: restoring config space at offset 0x1 (was 0x2800000, writing 0x2800001)
[50252.794612] uhci_hcd 0000:00:1d.2: restoring config space at offset 0xf (was 0x300, writing 0x309)
[50252.794625] uhci_hcd 0000:00:1d.2: restoring config space at offset 0x8 (was 0x1, writing 0x6f41)
[50252.794639] uhci_hcd 0000:00:1d.2: restoring config space at offset 0x1 (was 0x2800000, writing 0x2800001)
[50252.794679] ehci_hcd 0000:00:1d.7: restoring config space at offset 0x1 (was 0x2900106, writing 0x2900102)
[50252.794697] ehci_hcd 0000:00:1d.7: PME# disabled
[50252.794716] pci 0000:00:1e.0: restoring config space at offset 0x9 (was 0x100f1, writing 0x1fff1)
[50252.794721] pci 0000:00:1e.0: restoring config space at offset 0x8 (was 0xb0, writing 0xf1b0f1b0)
[50252.794726] pci 0000:00:1e.0: restoring config space at offset 0x7 (was 0x2280e0f0, writing 0x228000f0)
[50252.794738] pci 0000:00:1e.0: restoring config space at offset 0x1 (was 0x100007, writing 0x100107)
[50252.794786] pci 0000:00:1f.0: restoring config space at offset 0x1 (was 0x2100007, writing 0x2100107)
[50252.794804] ata_piix 0000:00:1f.1: restoring config space at offset 0xf (was 0x100, writing 0x107)
[50252.794828] ata_piix 0000:00:1f.1: restoring config space at offset 0x1 (was 0x2800005, writing 0x2880005)
[50252.794850] ahci 0000:00:1f.2: restoring config space at offset 0xf (was 0x200, writing 0x20a)
[50252.794862] ahci 0000:00:1f.2: restoring config space at offset 0x9 (was 0x0, writing 0xf6ffb800)
[50252.794878] ahci 0000:00:1f.2: restoring config space at offset 0x1 (was 0x2b00000, writing 0x2b00407)
[50252.794911] pci 0000:00:1f.3: restoring config space at offset 0xf (was 0x200, writing 0x20a)
[50252.794931] pci 0000:00:1f.3: restoring config space at offset 0x4 (was 0x0, writing 0xf6ffb700)
[50252.794939] pci 0000:00:1f.3: restoring config space at offset 0x1 (was 0x2800001, writing 0x2800103)
[50252.794997] nvidia 0000:01:00.0: restoring config space at offset 0xf (was 0x100, writing 0x107)
[50252.795011] nvidia 0000:01:00.0: restoring config space at offset 0x9 (was 0x1, writing 0xef01)
[50252.795018] nvidia 0000:01:00.0: restoring config space at offset 0x7 (was 0x4, writing 0xf2000004)
[50252.795025] nvidia 0000:01:00.0: restoring config space at offset 0x5 (was 0xc, writing 0xe000000c)
[50252.795031] nvidia 0000:01:00.0: restoring config space at offset 0x4 (was 0x0, writing 0xf5000000)
[50252.795040] nvidia 0000:01:00.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100007)
[50252.795114] sky2 0000:09:00.0: restoring config space at offset 0xf (was 0x100, writing 0x107)
[50252.795139] sky2 0000:09:00.0: restoring config space at offset 0x6 (was 0x1, writing 0xde01)
[50252.795148] sky2 0000:09:00.0: restoring config space at offset 0x4 (was 0x4, writing 0xf1ffc004)
[50252.795155] sky2 0000:09:00.0: restoring config space at offset 0x3 (was 0x0, writing 0x10)
[50252.795164] sky2 0000:09:00.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100507)
[50252.795270] iwlagn 0000:0b:00.0: restoring config space at offset 0xf (was 0x100, writing 0x107)
[50252.795316] iwlagn 0000:0b:00.0: restoring config space at offset 0x4 (was 0x4, writing 0xf1efe004)
[50252.795332] iwlagn 0000:0b:00.0: restoring config space at offset 0x3 (was 0x0, writing 0x10)
[50252.795358] iwlagn 0000:0b:00.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100106)
[50252.795441] ohci1394 0000:03:09.0: restoring config space at offset 0xf (was 0x4020100, writing 0x4020107)
[50252.795463] ohci1394 0000:03:09.0: restoring config space at offset 0x3 (was 0x800000, writing 0x804010)
[50252.795469] ohci1394 0000:03:09.0: restoring config space at offset 0x1 (was 0x2100000, writing 0x2100106)
[50252.795491] sdhci-pci 0000:03:09.1: restoring config space at offset 0xf (was 0x200, writing 0x205)
[50252.795513] sdhci-pci 0000:03:09.1: restoring config space at offset 0x4 (was 0x0, writing 0xf1bff400)
[50252.795517] sdhci-pci 0000:03:09.1: restoring config space at offset 0x3 (was 0x800000, writing 0x804010)
[50252.795524] sdhci-pci 0000:03:09.1: restoring config space at offset 0x1 (was 0x2100000, writing 0x2100106)
[50252.795546] ricoh-mmc 0000:03:09.2: restoring config space at offset 0xf (was 0x200, writing 0x205)
[50252.795567] ricoh-mmc 0000:03:09.2: restoring config space at offset 0x4 (was 0x0, writing 0xf1bff500)
[50252.795573] ricoh-mmc 0000:03:09.2: restoring config space at offset 0x3 (was 0x800000, writing 0x804010)
[50252.795580] ricoh-mmc 0000:03:09.2: restoring config space at offset 0x1 (was 0x2100000, writing 0x2100106)
[50252.795590] ricoh-mmc: Resuming.
[50252.795599] ricoh-mmc: Controller is now disabled.
[50252.795610] pci 0000:03:09.3: restoring config space at offset 0xf (was 0x200, writing 0x205)
[50252.795631] pci 0000:03:09.3: restoring config space at offset 0x4 (was 0x0, writing 0xf1bff700)
[50252.795636] pci 0000:03:09.3: restoring config space at offset 0x3 (was 0x800000, writing 0x804010)
[50252.795643] pci 0000:03:09.3: restoring config space at offset 0x1 (was 0x2100000, writing 0x2100106)
[50253.133192] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[50253.133199] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[50253.133223] usb usb3: root hub lost power or was reset
[50253.133252] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[50253.133258] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[50253.133282] usb usb4: root hub lost power or was reset
[50253.133300] ehci_hcd 0000:00:1a.7: PME# disabled
[50253.133304] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 22 (level, low) -> IRQ 22
[50253.133309] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[50253.133328] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
[50253.133334] HDA Intel 0000:00:1b.0: setting latency timer to 64
[50253.133353] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[50253.133359] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[50253.133383] usb usb5: root hub lost power or was reset
[50253.133411] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[50253.133416] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[50253.133440] usb usb6: root hub lost power or was reset
[50253.133457] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22
[50253.133462] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[50253.133485] usb usb7: root hub lost power or was reset
[50253.133504] ehci_hcd 0000:00:1d.7: PME# disabled
[50253.133507] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[50253.133513] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[50253.133538] pci 0000:00:1e.0: setting latency timer to 64
[50253.133546] ata_piix 0000:00:1f.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[50253.133550] ata_piix 0000:00:1f.1: setting latency timer to 64
[50253.133594] ata5: port disabled. ignoring.
[50253.133607] ata4.00: _GTF evaluation failed (AE 0x1001)
[50253.133695] ahci 0000:00:1f.2: setting latency timer to 64
[50253.481143] ata3: SATA link down (SStatus 0 SControl 300)
[50253.830014] ata4.00: configured for UDMA/33
[50253.912292] sky2 0000:09:00.0: PME# disabled
[50253.971241] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[16]  MMIO=[f1bff800-f1bfffff]  Max Packet=[2048]  IR/IT contexts=[4/4]
[50253.977242] sdhci-pci 0000:03:09.1: PCI INT B -> GSI 18 (level, low) -> IRQ 18
[50253.978259] pci 0000:03:09.3: PME# disabled
[50253.978264] pci 0000:03:09.4: PME# disabled
[50254.692250] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[50254.748374] ata1.00: configured for UDMA/100
[50254.761287] ata1: exception Emask 0x10 SAct 0x0 SErr 0x0 action 0xf t4
[50254.761291] ata1: irq_stat 0x00400040, connection status changed
[50254.761299] ata1: hard resetting link
[50254.876094] sd 0:0:0:0: [sda] Starting disk
[50255.485288] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[50255.486226] ata1.00: configured for UDMA/100
[50255.486230] ata1: EH complete
[50255.616227] usb 1-1: reset high speed USB device using ehci_hcd and address 2
[50255.920225] usb 3-2: reset full speed USB device using uhci_hcd and address 2
[50256.592227] usb 5-2: reset low speed USB device using uhci_hcd and address 5
[50257.572225] usb 5-1: reset low speed USB device using uhci_hcd and address 11
[50258.083496] PM: resume devices took 5.272 seconds
[50258.083497] ------------[ cut here ]------------
[50258.083503] WARNING: at /build/buildd/linux-2.6.31/kernel/power/suspend_test.c:52 suspend_test_finish+0x80/0x90()
[50258.083504] Hardware name: XPS M1530                       
[50258.083506] Component: resume devices
[50258.083507] Modules linked in: usbhid binfmt_misc ppdev snd_hda_codec_idt snd_hda_intel snd_hda_codec arc4 ecb snd_hwdep snd_pcm_oss iwlagn snd_mixer_oss iwlcore snd_pcm snd_seq_dummy snd_seq_oss snd_seq_midi snd_rawmidi snd_seq_midi_event snd_seq snd_timer joydev snd_seq_device iptable_filter snd dell_wmi ip_tables sdhci_pci mac80211 uvcvideo videodev v4l1_compat nvidia(P) soundcore dell_laptop psmouse sdhci ricoh_mmc cfg80211 serio_raw led_class snd_page_alloc x_tables lp dcdbas parport ohci1394 ieee1394 sky2 video output intel_agp agpgart
[50258.083537] Pid: 30360, comm: pm-suspend Tainted: P           2.6.31-14-generic #48-Ubuntu
[50258.083538] Call Trace:
[50258.083543]  [<c014518d>] warn_slowpath_common+0x6d/0xa0
[50258.083546]  [<c0174e70>] ? suspend_test_finish+0x80/0x90
[50258.083548]  [<c0174e70>] ? suspend_test_finish+0x80/0x90
[50258.083551]  [<c0145206>] warn_slowpath_fmt+0x26/0x30
[50258.083553]  [<c0174e70>] suspend_test_finish+0x80/0x90
[50258.083556]  [<c0174c5f>] suspend_devices_and_enter+0x9f/0xd0
[50258.083559]  [<c056e41c>] ? printk+0x18/0x1c
[50258.083562]  [<c0174d49>] enter_state+0xb9/0xf0
[50258.083564]  [<c017443d>] state_store+0x6d/0xb0
[50258.083566]  [<c01743d0>] ? state_store+0x0/0xb0
[50258.083569]  [<c0311a70>] kobj_attr_store+0x20/0x30
[50258.083573]  [<c0239290>] sysfs_write_file+0x90/0x100
[50258.083576]  [<c01e747a>] vfs_write+0x9a/0x190
[50258.083578]  [<c0239200>] ? sysfs_write_file+0x0/0x100
[50258.083581]  [<c0572d4b>] ? do_page_fault+0x19b/0x380
[50258.083583]  [<c01e7f3d>] sys_write+0x3d/0x70
[50258.083586]  [<c010336c>] syscall_call+0x7/0xb
[50258.083588] ---[ end trace 8e4a55ca7c6b263e ]---
[50258.083861] PM: Finishing wakeup.
[50258.083862] Restarting tasks ... done.
[50258.204546] sky2 eth0: enabling interface
[50258.204699] ADDRCONF(NETDEV_UP): eth0: link is not ready
[50259.589433] input: PS/2 Mouse as /devices/platform/i8042/serio1/input/input26
[50259.615971] input: AlpsPS/2 ALPS GlidePoint as /devices/platform/i8042/serio1/input/input27
[50261.022595] sky2 eth0: Link is up at 100 Mbps, full duplex, flow control rx
[50261.024498] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[50271.680237] eth0: no IPv6 routers present