[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.31-14-generic (buildd@rothera) (gcc version 4.4.1 (Ubuntu 4.4.1-4ubuntu8) ) #48-Ubuntu SMP Fri Oct 16 14:04:26 UTC 2009 (Ubuntu 2.6.31-14.48-generic) [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] NSC Geode by NSC [ 0.000000] Cyrix CyrixInstead [ 0.000000] Centaur CentaurHauls [ 0.000000] Transmeta GenuineTMx86 [ 0.000000] Transmeta TransmetaCPU [ 0.000000] UMC UMC UMC UMC [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f000 (usable) [ 0.000000] BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000003ffae000 (usable) [ 0.000000] BIOS-e820: 000000003ffae000 - 0000000040000000 (reserved) [ 0.000000] BIOS-e820: 00000000feda0000 - 00000000fee00000 (reserved) [ 0.000000] BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved) [ 0.000000] DMI 2.3 present. [ 0.000000] last_pfn = 0x3ffae max_arch_pfn = 0x100000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-CFFFF write-protect [ 0.000000] D0000-EFFFF uncachable [ 0.000000] F0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000 mask FC0000000 write-back [ 0.000000] 1 base 0FEDA0000 mask FFFFE0000 write-through [ 0.000000] 2 disabled [ 0.000000] 3 disabled [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] PAT not supported by CPU. [ 0.000000] e820 update range: 0000000000002000 - 0000000000006000 (usable) ==> (reserved) [ 0.000000] Scanning 1 areas for low memory corruption [ 0.000000] modified physical RAM map: [ 0.000000] modified: 0000000000000000 - 0000000000002000 (usable) [ 0.000000] modified: 0000000000002000 - 0000000000006000 (reserved) [ 0.000000] modified: 0000000000006000 - 000000000009f000 (usable) [ 0.000000] modified: 000000000009f000 - 00000000000a0000 (reserved) [ 0.000000] modified: 0000000000100000 - 000000003ffae000 (usable) [ 0.000000] modified: 000000003ffae000 - 0000000040000000 (reserved) [ 0.000000] modified: 00000000feda0000 - 00000000fee00000 (reserved) [ 0.000000] modified: 00000000ffb00000 - 0000000100000000 (reserved) [ 0.000000] initial memory mapped : 0 - 00c00000 [ 0.000000] init_memory_mapping: 0000000000000000-00000000377fe000 [ 0.000000] Using x86 segment limits to approximate NX protection [ 0.000000] 0000000000 - 0000400000 page 4k [ 0.000000] 0000400000 - 0037400000 page 2M [ 0.000000] 0037400000 - 00377fe000 page 4k [ 0.000000] kernel direct mapping tables up to 377fe000 @ 7000-c000 [ 0.000000] RAMDISK: 378a6000 - 37fefa1a [ 0.000000] Allocated new RAMDISK: 008ad000 - 00ff6a1a [ 0.000000] Move RAMDISK from 00000000378a6000 - 0000000037fefa19 to 008ad000 - 00ff6a19 [ 0.000000] ACPI: RSDP 000fdf00 00014 (v00 DELL ) [ 0.000000] ACPI: RSDT 3fff0000 00028 (v01 DELL CPi R 27D50112 ASL 00000061) [ 0.000000] ACPI: FACP 3fff0400 00074 (v01 DELL CPi R 27D50112 ASL 00000061) [ 0.000000] ACPI: DSDT 3fff0c00 02E0C (v01 INT430 SYSFexxx 00001001 MSFT 0100000E) [ 0.000000] ACPI: FACS 3ffff800 00040 [ 0.000000] 135MB HIGHMEM available. [ 0.000000] 887MB LOWMEM available. [ 0.000000] mapped low ram: 0 - 377fe000 [ 0.000000] low ram: 0 - 377fe000 [ 0.000000] node 0 low ram: 00000000 - 377fe000 [ 0.000000] node 0 bootmap 00008000 - 0000ef00 [ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 00377fe000] [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] [ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000] [ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000] [ 0.000000] #3 [0000100000 - 00008a80a0] TEXT DATA BSS ==> [0000100000 - 00008a80a0] [ 0.000000] #4 [000009f000 - 0000100000] BIOS reserved ==> [000009f000 - 0000100000] [ 0.000000] #5 [00008a9000 - 00008ac198] BRK ==> [00008a9000 - 00008ac198] [ 0.000000] #6 [0000007000 - 0000008000] PGTABLE ==> [0000007000 - 0000008000] [ 0.000000] #7 [00008ad000 - 0000ff6a1a] NEW RAMDISK ==> [00008ad000 - 0000ff6a1a] [ 0.000000] #8 [0000008000 - 000000f000] BOOTMAP ==> [0000008000 - 000000f000] [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000000 -> 0x00001000 [ 0.000000] Normal 0x00001000 -> 0x000377fe [ 0.000000] HighMem 0x000377fe -> 0x0003ffae [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[3] active PFN ranges [ 0.000000] 0: 0x00000000 -> 0x00000002 [ 0.000000] 0: 0x00000006 -> 0x0000009f [ 0.000000] 0: 0x00000100 -> 0x0003ffae [ 0.000000] On node 0 totalpages: 261961 [ 0.000000] free_area_init_node: node 0, pgdat c0784900, node_mem_map c1000000 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 3963 pages, LIFO batch:0 [ 0.000000] Normal zone: 1744 pages used for memmap [ 0.000000] Normal zone: 221486 pages, LIFO batch:31 [ 0.000000] HighMem zone: 272 pages used for memmap [ 0.000000] HighMem zone: 34464 pages, LIFO batch:7 [ 0.000000] Using APIC driver default [ 0.000000] ACPI: PM-Timer IO Port: 0x808 [ 0.000000] SMP: Allowing 1 CPUs, 0 hotplug CPUs [ 0.000000] Local APIC disabled by BIOS -- you can enable it with "lapic" [ 0.000000] APIC: disable apic facility [ 0.000000] nr_irqs_gsi: 16 [ 0.000000] PM: Registered nosave memory: 0000000000002000 - 0000000000006000 [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 0000000000100000 [ 0.000000] Allocating PCI resources starting at 40000000 (gap: 40000000:beda0000) [ 0.000000] NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:1 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 14 pages at c1805000, static data 35612 bytes [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 259913 [ 0.000000] Kernel command line: root=UUID=a4d06996-3456-4f48-aaaf-c61d47dd5e04 ro quiet splash [ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Enabling fast FPU save and restore... done. [ 0.000000] Enabling unmasked SIMD FPU exception support... done. [ 0.000000] Initializing CPU#0 [ 0.000000] allocated 5241240 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] Initializing HighMem for node 0 (000377fe:0003ffae) [ 0.000000] Memory: 1018008k/1048248k available (4565k kernel code, 29532k reserved, 2143k data, 540k init, 138944k highmem) [ 0.000000] virtual kernel memory layout: [ 0.000000] fixmap : 0xfff1d000 - 0xfffff000 ( 904 kB) [ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB) [ 0.000000] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB) [ 0.000000] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB) [ 0.000000] .init : 0xc078e000 - 0xc0815000 ( 540 kB) [ 0.000000] .data : 0xc0575554 - 0xc078d308 (2143 kB) [ 0.000000] .text : 0xc0100000 - 0xc0575554 (4565 kB) [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.000000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.000000] NR_IRQS:2304 nr_irqs:256 [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 1993.562 MHz processor. [ 0.000998] Console: colour VGA+ 80x25 [ 0.001002] console [tty0] enabled [ 0.004008] Calibrating delay loop (skipped), value calculated using timer frequency.. 3987.12 BogoMIPS (lpj=7974248) [ 0.004029] Security Framework initialized [ 0.004055] AppArmor: AppArmor initialized [ 0.004063] Mount-cache hash table entries: 512 [ 0.004191] Initializing cgroup subsys ns [ 0.004197] Initializing cgroup subsys cpuacct [ 0.004201] Initializing cgroup subsys memory [ 0.004210] Initializing cgroup subsys freezer [ 0.004212] Initializing cgroup subsys net_cls [ 0.004228] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.004231] CPU: L2 cache: 2048K [ 0.004236] mce: CPU supports 5 MCE banks [ 0.004244] ------------[ cut here ]------------ [ 0.004255] WARNING: at /build/buildd/linux-2.6.31/arch/x86/kernel/apic/apic.c:247 native_apic_write_dummy+0x33/0x40() [ 0.004258] Hardware name: Inspiron 600m [ 0.004260] Modules linked in: [ 0.004264] Pid: 0, comm: swapper Not tainted 2.6.31-14-generic #48-Ubuntu [ 0.004267] Call Trace: [ 0.004277] [] warn_slowpath_common+0x6d/0xa0 [ 0.004281] [] ? native_apic_write_dummy+0x33/0x40 [ 0.004285] [] ? native_apic_write_dummy+0x33/0x40 [ 0.004289] [] warn_slowpath_null+0x15/0x20 [ 0.004293] [] native_apic_write_dummy+0x33/0x40 [ 0.004299] [] intel_init_thermal+0xac/0x1a0 [ 0.004303] [] mce_intel_feature_init+0xb/0x60 [ 0.004307] [] mce_cpu_features+0x10/0x40 [ 0.004313] [] mcheck_init+0x14a/0x188 [ 0.004317] [] ? init_hypervisor+0xb/0x2c [ 0.004320] [] identify_cpu+0x20e/0x21d [ 0.004327] [] identify_boot_cpu+0xd/0x23 [ 0.004330] [] check_bugs+0xb/0xe9 [ 0.004336] [] start_kernel+0x2dc/0x2ec [ 0.004340] [] ? unknown_bootoption+0x0/0x1ab [ 0.004344] [] i386_start_kernel+0x7c/0x83 [ 0.004353] ---[ end trace a7919e7f17c0a725 ]--- [ 0.004356] CPU0: Thermal monitoring enabled (TM1) [ 0.004366] Performance Counters: [ 0.004368] no APIC, boot with the "lapic" boot parameter to force-enable it. [ 0.004370] no hardware sampling interrupt available. [ 0.004372] p6 PMU driver. [ 0.004378] ... version: 0 [ 0.004380] ... bit width: 32 [ 0.004381] ... generic counters: 2 [ 0.004383] ... value mask: 00000000ffffffff [ 0.004386] ... max period: 000000007fffffff [ 0.004387] ... fixed-purpose counters: 0 [ 0.004389] ... counter mask: 0000000000000003 [ 0.004394] Checking 'hlt' instruction... OK. [ 0.020802] SMP alternatives: switching to UP code [ 0.026936] Freeing SMP alternatives: 19k freed [ 0.026945] ACPI: Core revision 20090521 [ 0.032042] ACPI: setting ELCR to 0200 (from 0800) [ 0.033124] weird, boot CPU (#0) not listed by the BIOS. [ 0.033126] SMP motherboard not detected. [ 0.033128] Local APIC not detected. Using dummy APIC emulation. [ 0.033130] SMP disabled [ 0.033271] Brought up 1 CPUs [ 0.033274] Total of 1 processors activated (3987.12 BogoMIPS). [ 0.033286] CPU0 attaching NULL sched-domain. [ 0.033497] Booting paravirtualized kernel on bare hardware [ 0.033696] regulator: core version 0.5 [ 0.033722] Time: 17:34:21 Date: 11/02/09 [ 0.033771] NET: Registered protocol family 16 [ 0.033902] EISA bus registered [ 0.033917] ACPI: bus type pci registered [ 0.069046] PCI: PCI BIOS revision 2.10 entry at 0xfc96e, last bus=2 [ 0.069048] PCI: Using configuration type 1 for base access [ 0.070049] bio: create slab at 0 [ 0.070519] ACPI: EC: Look up EC in DSDT [ 0.079608] ACPI: Interpreter enabled [ 0.079618] ACPI: (supports S0 S1 S3 S4 S5) [ 0.079640] ACPI: Using PIC for interrupt routing [ 0.098187] ACPI: ACPI Dock Station Driver: 1 docks/bays found [ 0.102797] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 0.102843] pci 0000:00:00.0: reg 10 32bit mmio: [0xe0000000-0xe7ffffff] [ 0.102953] pci 0000:00:1d.0: reg 20 io port: [0xbf80-0xbf9f] [ 0.103004] pci 0000:00:1d.1: reg 20 io port: [0xbf40-0xbf5f] [ 0.103054] pci 0000:00:1d.2: reg 20 io port: [0xbf20-0xbf3f] [ 0.103113] pci 0000:00:1d.7: reg 10 32bit mmio: [0xf4fffc00-0xf4ffffff] [ 0.103168] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold [ 0.103173] pci 0000:00:1d.7: PME# disabled [ 0.103259] pci 0000:00:1f.0: quirk: region 0800-087f claimed by ICH4 ACPI/GPIO/TCO [ 0.103263] pci 0000:00:1f.0: quirk: region 0880-08bf claimed by ICH4 GPIO [ 0.103285] pci 0000:00:1f.1: reg 10 io port: [0x1f0-0x1f7] [ 0.103292] pci 0000:00:1f.1: reg 14 io port: [0x3f4-0x3f7] [ 0.103299] pci 0000:00:1f.1: reg 18 io port: [0x170-0x177] [ 0.103306] pci 0000:00:1f.1: reg 1c io port: [0x374-0x377] [ 0.103313] pci 0000:00:1f.1: reg 20 io port: [0xbfa0-0xbfaf] [ 0.103320] pci 0000:00:1f.1: reg 24 32bit mmio: [0x000000-0x0003ff] [ 0.103361] pci 0000:00:1f.5: reg 10 io port: [0xb800-0xb8ff] [ 0.103368] pci 0000:00:1f.5: reg 14 io port: [0xbc40-0xbc7f] [ 0.103374] pci 0000:00:1f.5: reg 18 32bit mmio: [0xf4fff800-0xf4fff9ff] [ 0.103381] pci 0000:00:1f.5: reg 1c 32bit mmio: [0xf4fff400-0xf4fff4ff] [ 0.103409] pci 0000:00:1f.5: PME# supported from D0 D3hot D3cold [ 0.103413] pci 0000:00:1f.5: PME# disabled [ 0.103443] pci 0000:00:1f.6: reg 10 io port: [0xb400-0xb4ff] [ 0.103449] pci 0000:00:1f.6: reg 14 io port: [0xb080-0xb0ff] [ 0.103485] pci 0000:00:1f.6: PME# supported from D0 D3hot D3cold [ 0.103489] pci 0000:00:1f.6: PME# disabled [ 0.103524] pci 0000:01:00.0: reg 10 32bit mmio: [0xe8000000-0xefffffff] [ 0.103530] pci 0000:01:00.0: reg 14 io port: [0xc000-0xc0ff] [ 0.103536] pci 0000:01:00.0: reg 18 32bit mmio: [0xfcff0000-0xfcffffff] [ 0.103550] pci 0000:01:00.0: reg 30 32bit mmio: [0x000000-0x01ffff] [ 0.103569] pci 0000:01:00.0: supports D1 D2 [ 0.103602] pci 0000:00:01.0: bridge io port: [0xc000-0xcfff] [ 0.103606] pci 0000:00:01.0: bridge 32bit mmio: [0xfc000000-0xfdffffff] [ 0.103610] pci 0000:00:01.0: bridge 32bit mmio pref: [0xe8000000-0xefffffff] [ 0.103641] pci 0000:02:00.0: reg 10 32bit mmio: [0xfaffe000-0xfaffffff] [ 0.103680] pci 0000:02:00.0: supports D1 D2 [ 0.103682] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.103686] pci 0000:02:00.0: PME# disabled [ 0.103718] pci 0000:02:01.0: reg 10 32bit mmio: [0x000000-0x000fff] [ 0.103737] pci 0000:02:01.0: supports D1 D2 [ 0.103739] pci 0000:02:01.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.103743] pci 0000:02:01.0: PME# disabled [ 0.103776] pci 0000:02:01.1: reg 10 32bit mmio: [0x000000-0x000fff] [ 0.103794] pci 0000:02:01.1: supports D1 D2 [ 0.103796] pci 0000:02:01.1: PME# supported from D0 D1 D2 D3hot D3cold [ 0.103801] pci 0000:02:01.1: PME# disabled [ 0.103839] pci 0000:02:03.0: reg 10 32bit mmio: [0xfaffd000-0xfaffdfff] [ 0.103882] pci 0000:02:03.0: PME# supported from D0 D3hot D3cold [ 0.103886] pci 0000:02:03.0: PME# disabled [ 0.103923] pci 0000:00:1e.0: transparent bridge [ 0.103927] pci 0000:00:1e.0: bridge io port: [0xd000-0xefff] [ 0.103932] pci 0000:00:1e.0: bridge 32bit mmio: [0xf6000000-0xfbffffff] [ 0.103973] pci_bus 0000:00: on NUMA node 0 [ 0.103977] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.104192] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT] [ 0.104240] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIE._PRT] [ 0.116994] ACPI: PCI Interrupt Link [LNKA] (IRQs 9 10 *11) [ 0.117104] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 7) *11 [ 0.117213] ACPI: PCI Interrupt Link [LNKC] (IRQs 9 10 *11) [ 0.117320] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 7 9 10 *11) [ 0.117412] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. [ 0.117525] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 *11 12 14 15) [ 0.117719] SCSI subsystem initialized [ 0.117766] libata version 3.00 loaded. [ 0.117834] usbcore: registered new interface driver usbfs [ 0.117849] usbcore: registered new interface driver hub [ 0.117875] usbcore: registered new device driver usb [ 0.118000] ACPI: WMI: Mapper loaded [ 0.118002] PCI: Using ACPI for IRQ routing [ 0.118141] Bluetooth: Core ver 2.15 [ 0.118167] NET: Registered protocol family 31 [ 0.118169] Bluetooth: HCI device and connection manager initialized [ 0.118172] Bluetooth: HCI socket layer initialized [ 0.118174] NetLabel: Initializing [ 0.118176] NetLabel: domain hash size = 128 [ 0.118178] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.118193] NetLabel: unlabeled traffic allowed by default [ 0.120122] pnp: PnP ACPI init [ 0.120146] ACPI: bus type pnp registered [ 0.129004] pnp 00:02: io resource (0x800-0x805) overlaps 0000:00:1f.0 BAR 13 (0x800-0x87f), disabling [ 0.129009] pnp 00:02: io resource (0x808-0x80f) overlaps 0000:00:1f.0 BAR 13 (0x800-0x87f), disabling [ 0.129071] pnp 00:03: io resource (0x806-0x807) overlaps 0000:00:1f.0 BAR 13 (0x800-0x87f), disabling [ 0.129075] pnp 00:03: io resource (0x810-0x85f) overlaps 0000:00:1f.0 BAR 13 (0x800-0x87f), disabling [ 0.129079] pnp 00:03: io resource (0x860-0x87f) overlaps 0000:00:1f.0 BAR 13 (0x800-0x87f), disabling [ 0.145890] pnp: PnP ACPI: found 13 devices [ 0.145893] ACPI: ACPI bus type pnp unregistered [ 0.145898] PnPBIOS: Disabled by ACPI PNP [ 0.145911] system 00:00: iomem range 0x0-0x9fbff could not be reserved [ 0.145915] system 00:00: iomem range 0x9fc00-0x9ffff could not be reserved [ 0.145918] system 00:00: iomem range 0xc0000-0xcffff could not be reserved [ 0.145921] system 00:00: iomem range 0xe0000-0xfffff could not be reserved [ 0.145924] system 00:00: iomem range 0x100000-0x3ffeffff could not be reserved [ 0.145928] system 00:00: iomem range 0x3fff0000-0x3fffffff has been reserved [ 0.145931] system 00:00: iomem range 0xfeda0000-0xfedfffff has been reserved [ 0.145934] system 00:00: iomem range 0xffb00000-0xffbfffff has been reserved [ 0.145941] system 00:02: ioport range 0x4d0-0x4d1 has been reserved [ 0.145946] system 00:03: ioport range 0xf400-0xf4fe has been reserved [ 0.145950] system 00:03: ioport range 0x880-0x8bf has been reserved [ 0.145953] system 00:03: ioport range 0x8c0-0x8df has been reserved [ 0.145956] system 00:03: ioport range 0x8e0-0x8ff has been reserved [ 0.145962] system 00:08: ioport range 0x900-0x97f has been reserved [ 0.180623] AppArmor: AppArmor Filesystem Enabled [ 0.180657] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01 [ 0.180661] pci 0000:00:01.0: IO window: 0xc000-0xcfff [ 0.180665] pci 0000:00:01.0: MEM window: 0xfc000000-0xfdffffff [ 0.180669] pci 0000:00:01.0: PREFETCH window: 0xe8000000-0xefffffff [ 0.180681] pci 0000:02:01.0: CardBus bridge, secondary bus 0000:03 [ 0.180684] pci 0000:02:01.0: IO window: 0x00d000-0x00d0ff [ 0.180689] pci 0000:02:01.0: IO window: 0x00d400-0x00d4ff [ 0.180693] pci 0000:02:01.0: PREFETCH window: 0x40000000-0x43ffffff [ 0.180698] pci 0000:02:01.0: MEM window: 0x4c000000-0x4fffffff [ 0.180703] pci 0000:02:01.1: CardBus bridge, secondary bus 0000:07 [ 0.180705] pci 0000:02:01.1: IO window: 0x00d800-0x00d8ff [ 0.180710] pci 0000:02:01.1: IO window: 0x00dc00-0x00dcff [ 0.180714] pci 0000:02:01.1: PREFETCH window: 0x44000000-0x47ffffff [ 0.180719] pci 0000:02:01.1: MEM window: 0x50000000-0x53ffffff [ 0.180724] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:02 [ 0.180727] pci 0000:00:1e.0: IO window: 0xd000-0xefff [ 0.180733] pci 0000:00:1e.0: MEM window: 0xf6000000-0xfbffffff [ 0.180737] pci 0000:00:1e.0: PREFETCH window: 0x40000000-0x47ffffff [ 0.180752] pci 0000:00:1e.0: setting latency timer to 64 [ 0.180759] pci 0000:02:01.0: enabling device (0000 -> 0003) [ 0.180912] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11 [ 0.180915] PCI: setting IRQ 11 as level-triggered [ 0.180920] pci 0000:02:01.0: PCI INT A -> Link[LNKD] -> GSI 11 (level, low) -> IRQ 11 [ 0.180930] pci 0000:02:01.1: enabling device (0000 -> 0003) [ 0.180935] pci 0000:02:01.1: PCI INT A -> Link[LNKD] -> GSI 11 (level, low) -> IRQ 11 [ 0.180943] pci_bus 0000:00: resource 0 io: [0x00-0xffff] [ 0.180946] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff] [ 0.180949] pci_bus 0000:01: resource 0 io: [0xc000-0xcfff] [ 0.180952] pci_bus 0000:01: resource 1 mem: [0xfc000000-0xfdffffff] [ 0.180955] pci_bus 0000:01: resource 2 pref mem [0xe8000000-0xefffffff] [ 0.180958] pci_bus 0000:02: resource 0 io: [0xd000-0xefff] [ 0.180961] pci_bus 0000:02: resource 1 mem: [0xf6000000-0xfbffffff] [ 0.180963] pci_bus 0000:02: resource 2 pref mem [0x40000000-0x47ffffff] [ 0.180966] pci_bus 0000:02: resource 3 io: [0x00-0xffff] [ 0.180969] pci_bus 0000:02: resource 4 mem: [0x000000-0xffffffff] [ 0.180972] pci_bus 0000:03: resource 0 io: [0xd000-0xd0ff] [ 0.180975] pci_bus 0000:03: resource 1 io: [0xd400-0xd4ff] [ 0.180977] pci_bus 0000:03: resource 2 pref mem [0x40000000-0x43ffffff] [ 0.180980] pci_bus 0000:03: resource 3 mem: [0x4c000000-0x4fffffff] [ 0.180983] pci_bus 0000:07: resource 0 io: [0xd800-0xd8ff] [ 0.180986] pci_bus 0000:07: resource 1 io: [0xdc00-0xdcff] [ 0.180989] pci_bus 0000:07: resource 2 pref mem [0x44000000-0x47ffffff] [ 0.180992] pci_bus 0000:07: resource 3 mem: [0x50000000-0x53ffffff] [ 0.181028] NET: Registered protocol family 2 [ 0.181124] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.181473] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.182902] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 0.183828] TCP: Hash tables configured (established 131072 bind 65536) [ 0.183832] TCP reno registered [ 0.183969] NET: Registered protocol family 1 [ 0.184104] Trying to unpack rootfs image as initramfs... [ 0.403235] Freeing initrd memory: 7462k freed [ 0.414009] cpufreq-nforce2: No nForce2 chipset. [ 0.414041] Scanning for low memory corruption every 60 seconds [ 0.414204] audit: initializing netlink socket (disabled) [ 0.414238] type=2000 audit(1257183261.412:1): initialized [ 0.423172] highmem bounce pool size: 64 pages [ 0.423180] HugeTLB registered 4 MB page size, pre-allocated 0 pages [ 0.424644] VFS: Disk quotas dquot_6.5.2 [ 0.424700] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.425261] fuse init (API version 7.12) [ 0.425341] msgmni has been set to 1732 [ 0.425557] alg: No test for stdrng (krng) [ 0.425569] io scheduler noop registered [ 0.425572] io scheduler anticipatory registered [ 0.425574] io scheduler deadline registered [ 0.425615] io scheduler cfq registered (default) [ 0.425699] pci 0000:01:00.0: Boot video device [ 0.425799] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.425824] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 0.426294] ACPI: AC Adapter [AC] (on-line) [ 0.426387] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input0 [ 0.426763] ACPI: Lid Switch [LID] [ 0.426808] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1 [ 0.426813] ACPI: Power Button [PBTN] [ 0.426858] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2 [ 0.426861] ACPI: Sleep Button [SBTN] [ 0.427298] Marking TSC unstable due to TSC halts in idle [ 0.427321] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3] C4[C3]) [ 0.427346] processor LNXCPU:00: registered as cooling_device0 [ 0.427349] ACPI: Processor [CPU0] (supports 8 throttling states) [ 0.428074] Switched to high resolution mode on CPU 0 [ 0.438230] thermal LNXTHERM:01: registered as thermal_zone0 [ 0.438238] ACPI: Thermal Zone [THM] (46 C) [ 0.448190] isapnp: Scanning for PnP cards... [ 0.769249] ACPI: Battery Slot [BAT0] (battery present) [ 0.769293] ACPI: Battery Slot [BAT1] (battery absent) [ 0.812757] isapnp: No Plug & Play device found [ 0.813793] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.813889] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 0.814257] 00:0b: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 0.814481] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 5 [ 0.814484] PCI: setting IRQ 5 as level-triggered [ 0.814489] serial 0000:00:1f.6: PCI INT B -> Link[LNKB] -> GSI 5 (level, low) -> IRQ 5 [ 0.814497] serial 0000:00:1f.6: PCI INT B disabled [ 0.815411] brd: module loaded [ 0.815856] loop: module loaded [ 0.815924] input: Macintosh mouse button emulation as /devices/virtual/input/input3 [ 0.816055] ata_piix 0000:00:1f.1: version 2.13 [ 0.816065] ata_piix 0000:00:1f.1: enabling device (0005 -> 0007) [ 0.816214] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11 [ 0.816218] ata_piix 0000:00:1f.1: PCI INT A -> Link[LNKA] -> GSI 11 (level, low) -> IRQ 11 [ 0.816263] ata_piix 0000:00:1f.1: setting latency timer to 64 [ 0.816337] scsi0 : ata_piix [ 0.816412] scsi1 : ata_piix [ 0.817411] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xbfa0 irq 14 [ 0.817414] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xbfa8 irq 15 [ 0.818226] Fixed MDIO Bus: probed [ 0.818261] PPP generic driver version 2.4.2 [ 0.818343] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.818503] ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 11 [ 0.818507] ehci_hcd 0000:00:1d.7: PCI INT D -> Link[LNKH] -> GSI 11 (level, low) -> IRQ 11 [ 0.818521] ehci_hcd 0000:00:1d.7: setting latency timer to 64 [ 0.818525] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 0.818580] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1 [ 0.822488] ehci_hcd 0000:00:1d.7: debug port 1 [ 0.822494] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported [ 0.822738] ehci_hcd 0000:00:1d.7: irq 11, io mem 0xf4fffc00 [ 0.836036] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 0.836137] usb usb1: configuration #1 chosen from 1 choice [ 0.836167] hub 1-0:1.0: USB hub found [ 0.836176] hub 1-0:1.0: 6 ports detected [ 0.836242] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.836259] uhci_hcd: USB Universal Host Controller Interface driver [ 0.836280] uhci_hcd 0000:00:1d.0: PCI INT A -> Link[LNKA] -> GSI 11 (level, low) -> IRQ 11 [ 0.836286] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [ 0.836290] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 0.836321] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 0.836341] uhci_hcd 0000:00:1d.0: irq 11, io base 0x0000bf80 [ 0.836418] usb usb2: configuration #1 chosen from 1 choice [ 0.836443] hub 2-0:1.0: USB hub found [ 0.836450] hub 2-0:1.0: 2 ports detected [ 0.836490] uhci_hcd 0000:00:1d.1: PCI INT B -> Link[LNKD] -> GSI 11 (level, low) -> IRQ 11 [ 0.836496] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [ 0.836500] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 0.836530] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 [ 0.836549] uhci_hcd 0000:00:1d.1: irq 11, io base 0x0000bf40 [ 0.836625] usb usb3: configuration #1 chosen from 1 choice [ 0.836650] hub 3-0:1.0: USB hub found [ 0.836656] hub 3-0:1.0: 2 ports detected [ 0.836846] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11 [ 0.836850] uhci_hcd 0000:00:1d.2: PCI INT C -> Link[LNKC] -> GSI 11 (level, low) -> IRQ 11 [ 0.836855] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [ 0.836859] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 0.836891] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 [ 0.836911] uhci_hcd 0000:00:1d.2: irq 11, io base 0x0000bf20 [ 0.836986] usb usb4: configuration #1 chosen from 1 choice [ 0.837011] hub 4-0:1.0: USB hub found [ 0.837017] hub 4-0:1.0: 2 ports detected [ 0.837108] PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 0.842103] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.842110] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 0.842158] mice: PS/2 mouse device common for all mice [ 0.842302] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0 [ 0.842318] rtc0: alarms up to one day, 114 bytes nvram [ 0.842411] device-mapper: uevent: version 1.0.3 [ 0.842491] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com [ 0.842562] device-mapper: multipath: version 1.1.0 loaded [ 0.842565] device-mapper: multipath round-robin: version 1.0.0 loaded [ 0.842676] EISA: Probing bus 0 at eisa.0 [ 0.842698] EISA: Detected 0 cards. [ 0.842796] cpuidle: using governor ladder [ 0.842869] cpuidle: using governor menu [ 0.843329] TCP cubic registered [ 0.843483] NET: Registered protocol family 10 [ 0.843892] lo: Disabled Privacy Extensions [ 0.844204] NET: Registered protocol family 17 [ 0.844221] Bluetooth: L2CAP ver 2.13 [ 0.844222] Bluetooth: L2CAP socket layer initialized [ 0.844225] Bluetooth: SCO (Voice Link) ver 0.6 [ 0.844227] Bluetooth: SCO socket layer initialized [ 0.844254] Bluetooth: RFCOMM TTY layer initialized [ 0.844257] Bluetooth: RFCOMM socket layer initialized [ 0.844259] Bluetooth: RFCOMM ver 1.11 [ 0.878321] Using IPI No-Shortcut mode [ 0.878375] PM: Resume from disk failed. [ 0.878393] registered taskstats version 1 [ 0.878491] Magic number: 1:14:592 [ 0.878565] rtc_cmos 00:06: setting system clock to 2009-11-02 17:34:22 UTC (1257183262) [ 0.878569] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 0.878571] EDD information not available. [ 0.879040] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4 [ 0.984625] ata2.00: ATAPI: _NEC DVD+/-RW ND-6650A, 103D, max UDMA/33 [ 0.984965] ata1.00: ATA-6: FUJITSU MHV2080AH, 00000096, max UDMA/100 [ 0.984968] ata1.00: 156301488 sectors, multi 8: LBA [ 1.000392] ata2.00: configured for UDMA/33 [ 1.000659] ata1.00: configured for UDMA/100 [ 1.000801] scsi 0:0:0:0: Direct-Access ATA FUJITSU MHV2080A 0000 PQ: 0 ANSI: 5 [ 1.000914] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 1.000954] sd 0:0:0:0: [sda] 156301488 512-byte logical blocks: (80.0 GB/74.5 GiB) [ 1.001000] sd 0:0:0:0: [sda] Write Protect is off [ 1.001003] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.001027] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.001148] sda: [ 1.002957] scsi 1:0:0:0: CD-ROM _NEC DVD+-RW ND-6650A 103D PQ: 0 ANSI: 5 [ 1.006015] sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray [ 1.006018] Uniform CD-ROM driver Revision: 3.20 [ 1.006095] sr 1:0:0:0: Attached scsi CD-ROM sr0 [ 1.006139] sr 1:0:0:0: Attached scsi generic sg1 type 5 [ 1.020324] sda1 sda2 < sda5 > [ 1.055925] sd 0:0:0:0: [sda] Attached SCSI disk [ 1.055940] Freeing unused kernel memory: 540k freed [ 1.056360] Write protecting the kernel text: 4568k [ 1.056396] Write protecting the kernel read-only data: 1836k [ 1.179553] Linux agpgart interface v0.103 [ 1.233881] agpgart-intel 0000:00:00.0: Intel 855PM Chipset [ 1.245905] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A03:00/device:1e/device:1f/input/input5 [ 1.245949] ACPI: Video Device [VID] (multi-head: yes rom: no post: no) [ 1.309312] agpgart-intel 0000:00:00.0: AGP aperture is 128M @ 0xe0000000 [ 1.345503] [drm] Initialized drm 1.1.0 20060810 [ 1.366743] [drm] radeon default to kernel modesetting DISABLED. [ 1.366848] pci 0000:01:00.0: PCI INT A -> Link[LNKA] -> GSI 11 (level, low) -> IRQ 11 [ 1.368372] [drm] Initialized radeon 1.31.0 20080528 for 0000:01:00.0 on minor 0 [ 1.379031] b44 0000:02:00.0: PCI INT A -> Link[LNKC] -> GSI 11 (level, low) -> IRQ 11 [ 1.420058] usb 2-2: new full speed USB device using uhci_hcd and address 2 [ 1.436079] ssb: Sonics Silicon Backplane found on PCI device 0000:02:00.0 [ 1.436100] b44.c:v2.0 [ 1.456652] eth0: Broadcom 44xx/47xx 10/100BaseT Ethernet 00:12:3f:1b:57:2f [ 1.628118] usb 2-2: configuration #1 chosen from 1 choice [ 2.077757] PM: Starting manual resume from disk [ 2.077761] PM: Resume from partition 8:5 [ 2.077763] PM: Checking hibernation image. [ 2.077943] PM: Resume from disk failed. [ 2.081017] EXT3-fs: INFO: recovery required on readonly filesystem. [ 2.081020] EXT3-fs: write access will be enabled during recovery. [ 3.748463] kjournald starting. Commit interval 5 seconds [ 3.748480] EXT3-fs: sda1: orphan cleanup on readonly fs [ 3.748486] ext3_orphan_cleanup: deleting unreferenced inode 197085 [ 3.748522] ext3_orphan_cleanup: deleting unreferenced inode 197084 [ 3.748529] EXT3-fs: sda1: 2 orphan inodes deleted [ 3.748531] EXT3-fs: recovery complete. [ 3.766639] EXT3-fs: mounted filesystem with writeback data mode. [ 4.847438] type=1505 audit(1257183266.465:2): operation="profile_load" pid=390 name=/usr/share/gdm/guest-session/Xsession [ 4.879518] type=1505 audit(1257183266.497:3): operation="profile_load" pid=391 name=/sbin/dhclient3 [ 4.880171] type=1505 audit(1257183266.501:4): operation="profile_load" pid=391 name=/usr/lib/NetworkManager/nm-dhcp-client.action [ 4.880519] type=1505 audit(1257183266.501:5): operation="profile_load" pid=391 name=/usr/lib/connman/scripts/dhclient-script [ 4.934757] type=1505 audit(1257183266.553:6): operation="profile_load" pid=392 name=/usr/bin/evince [ 4.944888] type=1505 audit(1257183266.565:7): operation="profile_load" pid=392 name=/usr/bin/evince-previewer [ 4.950837] type=1505 audit(1257183266.569:8): operation="profile_load" pid=392 name=/usr/bin/evince-thumbnailer [ 4.998779] type=1505 audit(1257183266.617:9): operation="profile_load" pid=394 name=/usr/lib/cups/backend/cups-pdf [ 4.999540] type=1505 audit(1257183266.617:10): operation="profile_load" pid=394 name=/usr/sbin/cupsd [ 6.390695] Adding 3004112k swap on /dev/sda5. Priority:-1 extents:1 across:3004112k [ 7.027076] udev: starting version 147 [ 7.679471] EXT3 FS on sda1, internal journal [ 8.445490] lp: driver loaded but no devices found [ 8.760820] parport_pc 00:0c: reported by Plug and Play ACPI [ 8.760869] parport0: PC-style at 0x378 (0x778), irq 7, dma 1 [PCSPP,TRISTATE,COMPAT,ECP,DMA] [ 8.765909] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2) [ 8.769461] intel_rng: FWH not detected [ 8.806807] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 8.818157] dell-wmi: No known WMI GUID found [ 8.851474] ppdev: user-space parallel port driver [ 8.856211] lp0: using parport0 (interrupt-driven). [ 9.133936] input: PS/2 Mouse as /devices/platform/i8042/serio1/input/input6 [ 9.155450] input: AlpsPS/2 ALPS GlidePoint as /devices/platform/i8042/serio1/input/input7 [ 9.205730] Bluetooth: Generic Bluetooth USB driver ver 0.5 [ 9.205829] usbcore: registered new interface driver btusb [ 9.496318] lib80211: common routines for IEEE802.11 drivers [ 9.496322] lib80211_crypt: registered algorithm 'NULL' [ 10.425933] ieee80211: 802.11 data/management/control stack, git-1.1.13 [ 10.425938] ieee80211: Copyright (C) 2004-2005 Intel Corporation [ 11.578894] ipw2200: Intel(R) PRO/Wireless 2200/2915 Network Driver, 1.2.2kmprq [ 11.578900] ipw2200: Copyright(c) 2003-2006 Intel Corporation [ 11.579008] ipw2200 0000:02:03.0: PCI INT A -> Link[LNKB] -> GSI 5 (level, low) -> IRQ 5 [ 11.579155] ipw2200: Detected Intel PRO/Wireless 2915ABG Network Connection [ 11.579200] ipw2200 0000:02:03.0: firmware: requesting ipw2200-bss.fw [ 11.941374] ip_tables: (C) 2000-2006 Netfilter Core Team [ 12.034248] ipw2200: Detected geography ZZA (11 802.11bg channels, 13 802.11a channels) [ 12.036717] yenta_cardbus 0000:02:01.0: CardBus bridge found [1028:01be] [ 12.036739] yenta_cardbus 0000:02:01.0: O2: res at 0x94/0xD4: 00/ea [ 12.036741] yenta_cardbus 0000:02:01.0: O2: enabling read prefetch/write burst [ 12.164572] yenta_cardbus 0000:02:01.0: ISA IRQ mask 0x0418, PCI irq 11 [ 12.164577] yenta_cardbus 0000:02:01.0: Socket status: 30000006 [ 12.164582] pci_bus 0000:02: Raising subordinate bus# of parent bus (#02) from #02 to #06 [ 12.164592] yenta_cardbus 0000:02:01.0: pcmcia: parent PCI bridge I/O window: 0xd000 - 0xefff [ 12.164596] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xd000-0xefff: clean. [ 12.165017] yenta_cardbus 0000:02:01.0: pcmcia: parent PCI bridge Memory window: 0xf6000000 - 0xfbffffff [ 12.165020] yenta_cardbus 0000:02:01.0: pcmcia: parent PCI bridge Memory window: 0x40000000 - 0x47ffffff [ 12.165496] yenta_cardbus 0000:02:01.1: CardBus bridge found [1028:01be] [ 12.292590] yenta_cardbus 0000:02:01.1: ISA IRQ mask 0x0418, PCI irq 11 [ 12.292594] yenta_cardbus 0000:02:01.1: Socket status: 30000006 [ 12.292597] pci_bus 0000:02: Raising subordinate bus# of parent bus (#02) from #06 to #0a [ 12.292604] yenta_cardbus 0000:02:01.1: pcmcia: parent PCI bridge I/O window: 0xd000 - 0xefff [ 12.292607] pcmcia_socket pcmcia_socket1: cs: IO port probe 0xd000-0xefff: clean. [ 12.293046] yenta_cardbus 0000:02:01.1: pcmcia: parent PCI bridge Memory window: 0xf6000000 - 0xfbffffff [ 12.293049] yenta_cardbus 0000:02:01.1: pcmcia: parent PCI bridge Memory window: 0x40000000 - 0x47ffffff [ 13.037301] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x100-0x3af: clean. [ 13.038327] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x3e0-0x4ff: clean. [ 13.038741] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x820-0x8ff: clean. [ 13.038786] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xc00-0xcf7: clean. [ 13.039271] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xa00-0xaff: clean. [ 13.076831] pcmcia_socket pcmcia_socket1: cs: IO port probe 0x100-0x3af: clean. [ 13.077808] pcmcia_socket pcmcia_socket1: cs: IO port probe 0x3e0-0x4ff: clean. [ 13.078222] pcmcia_socket pcmcia_socket1: cs: IO port probe 0x820-0x8ff: clean. [ 13.078267] pcmcia_socket pcmcia_socket1: cs: IO port probe 0xc00-0xcf7: clean. [ 13.078751] pcmcia_socket pcmcia_socket1: cs: IO port probe 0xa00-0xaff: clean. [ 13.732279] Intel ICH 0000:00:1f.5: PCI INT B -> Link[LNKB] -> GSI 5 (level, low) -> IRQ 5 [ 13.732310] Intel ICH 0000:00:1f.5: setting latency timer to 64 [ 14.560034] intel8x0_measure_ac97_clock: measured 55254 usecs (2662 samples) [ 14.560038] intel8x0: clocking to 48000 [ 15.142370] __ratelimit: 3 callbacks suppressed [ 15.142374] type=1505 audit(1257183276.761:12): operation="profile_replace" pid=839 name=/usr/share/gdm/guest-session/Xsession [ 15.143882] type=1505 audit(1257183276.761:13): operation="profile_replace" pid=840 name=/sbin/dhclient3 [ 15.144552] type=1505 audit(1257183276.765:14): operation="profile_replace" pid=840 name=/usr/lib/NetworkManager/nm-dhcp-client.action [ 15.144906] type=1505 audit(1257183276.765:15): operation="profile_replace" pid=840 name=/usr/lib/connman/scripts/dhclient-script [ 15.150059] type=1505 audit(1257183276.769:16): operation="profile_replace" pid=841 name=/usr/bin/evince [ 15.160797] type=1505 audit(1257183276.781:17): operation="profile_replace" pid=841 name=/usr/bin/evince-previewer [ 15.167052] type=1505 audit(1257183276.785:18): operation="profile_replace" pid=841 name=/usr/bin/evince-thumbnailer [ 15.178033] type=1505 audit(1257183276.797:19): operation="profile_replace" pid=844 name=/usr/lib/cups/backend/cups-pdf [ 15.178795] type=1505 audit(1257183276.797:20): operation="profile_replace" pid=844 name=/usr/sbin/cupsd [ 15.180999] type=1505 audit(1257183276.801:21): operation="profile_replace" pid=845 name=/usr/sbin/tcpdump [ 19.659541] ADDRCONF(NETDEV_UP): eth0: link is not ready