[ 19.059774] __ratelimit: 15 callbacks suppressed [ 19.059778] type=1503 audit(1257184269.327:28): operation="open" pid=1499 parent=1498 profile="/usr/sbin/mysqld" requested_mask="r::" denied_mask="r::" fsuid=0 ouid=0 name="/sys/devices/system/cpu/" [ 19.134359] type=1503 audit(1257184269.404:29): operation="open" pid=1511 parent=1510 profile="/usr/sbin/mysqld" requested_mask="r::" denied_mask="r::" fsuid=0 ouid=0 name="/sys/devices/system/cpu/" [ 19.276198] i2c-adapter i2c-2: unable to read EDID block. [ 19.276202] i915 0000:00:02.0: HDMI Type A-1: no EDID data [ 19.280614] i2c-adapter i2c-2: unable to read EDID block. [ 19.280616] i915 0000:00:02.0: HDMI Type A-1: no EDID data [ 19.285156] i2c-adapter i2c-4: unable to read EDID block. [ 19.285158] i915 0000:00:02.0: HDMI Type A-2: no EDID data [ 19.289640] i2c-adapter i2c-4: unable to read EDID block. [ 19.289642] i915 0000:00:02.0: HDMI Type A-2: no EDID data [ 19.335311] [drm] TV-25: set mode NTSC 480i 0 [ 19.475839] [drm] TV-25: set mode NTSC 480i 0 [ 20.410826] i2c-adapter i2c-2: unable to read EDID block. [ 20.410830] i915 0000:00:02.0: HDMI Type A-1: no EDID data [ 20.415241] i2c-adapter i2c-2: unable to read EDID block. [ 20.415243] i915 0000:00:02.0: HDMI Type A-1: no EDID data [ 20.419679] i2c-adapter i2c-4: unable to read EDID block. [ 20.419681] i915 0000:00:02.0: HDMI Type A-2: no EDID data [ 20.424087] i2c-adapter i2c-4: unable to read EDID block. [ 20.424089] i915 0000:00:02.0: HDMI Type A-2: no EDID data [ 20.469991] [drm] TV-25: set mode NTSC 480i 0 [ 20.611886] [drm] TV-25: set mode NTSC 480i 0 [ 25.572200] eth1: no IPv6 routers present [ 25.775645] vboxdrv: Trying to deactivate the NMI watchdog permanently... [ 25.775648] vboxdrv: Successfully done. [ 25.775649] vboxdrv: Found 2 processor cores. [ 25.775743] vboxdrv: fAsync=0 offMin=0x18c offMax=0x24ab [ 25.775776] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'. [ 25.775778] vboxdrv: Successfully loaded version 3.0.8_OSE (interface 0x000e0000). [ 26.128571] ppdev: user-space parallel port driver [ 37.385011] hda-intel: azx_get_response timeout, switching to polling mode: last cmd=0x00af0700 [ 49.900509] i2c-adapter i2c-2: unable to read EDID block. [ 49.900512] i915 0000:00:02.0: HDMI Type A-1: no EDID data [ 49.904910] i2c-adapter i2c-2: unable to read EDID block. [ 49.904912] i915 0000:00:02.0: HDMI Type A-1: no EDID data [ 49.909728] i2c-adapter i2c-4: unable to read EDID block. [ 49.909730] i915 0000:00:02.0: HDMI Type A-2: no EDID data [ 49.914127] i2c-adapter i2c-4: unable to read EDID block. [ 49.914129] i915 0000:00:02.0: HDMI Type A-2: no EDID data [ 49.959797] [drm] TV-25: set mode NTSC 480i 0 [ 50.099978] [drm] TV-25: set mode NTSC 480i 0 [ 50.331450] i2c-adapter i2c-2: unable to read EDID block. [ 50.331454] i915 0000:00:02.0: HDMI Type A-1: no EDID data [ 50.335897] i2c-adapter i2c-2: unable to read EDID block. [ 50.335899] i915 0000:00:02.0: HDMI Type A-1: no EDID data [ 50.340370] i2c-adapter i2c-4: unable to read EDID block. [ 50.340372] i915 0000:00:02.0: HDMI Type A-2: no EDID data [ 50.344800] i2c-adapter i2c-4: unable to read EDID block. [ 50.344802] i915 0000:00:02.0: HDMI Type A-2: no EDID data [ 50.390508] [drm] TV-25: set mode NTSC 480i 0 [ 50.531152] [drm] TV-25: set mode NTSC 480i 0 [ 50.910511] i2c-adapter i2c-2: unable to read EDID block. [ 50.910515] i915 0000:00:02.0: HDMI Type A-1: no EDID data [ 50.915221] i2c-adapter i2c-2: unable to read EDID block. [ 50.915224] i915 0000:00:02.0: HDMI Type A-1: no EDID data [ 50.919935] i2c-adapter i2c-4: unable to read EDID block. [ 50.919937] i915 0000:00:02.0: HDMI Type A-2: no EDID data [ 50.924657] i2c-adapter i2c-4: unable to read EDID block. [ 50.924660] i915 0000:00:02.0: HDMI Type A-2: no EDID data [ 50.970387] [drm] TV-25: set mode NTSC 480i 0 [ 51.110587] [drm] TV-25: set mode NTSC 480i 0 [ 51.917049] usb 2-2: reset high speed USB device using ehci_hcd and address 2 [ 57.215706] i2c-adapter i2c-2: unable to read EDID block. [ 57.215710] i915 0000:00:02.0: HDMI Type A-1: no EDID data [ 57.222972] i2c-adapter i2c-2: unable to read EDID block. [ 57.222977] i915 0000:00:02.0: HDMI Type A-1: no EDID data [ 57.230134] i2c-adapter i2c-4: unable to read EDID block. [ 57.230138] i915 0000:00:02.0: HDMI Type A-2: no EDID data [ 57.234898] i2c-adapter i2c-4: unable to read EDID block. [ 57.234901] i915 0000:00:02.0: HDMI Type A-2: no EDID data [ 57.280594] [drm] TV-25: set mode NTSC 480i 0 [ 57.421071] [drm] TV-25: set mode NTSC 480i 0 [ 59.920047] usb 2-2: reset high speed USB device using ehci_hcd and address 2 [ 100.916233] usb 2-2: reset high speed USB device using ehci_hcd and address 2 [ 1120.456776] i2c-adapter i2c-2: unable to read EDID block. [ 1120.456780] i915 0000:00:02.0: HDMI Type A-1: no EDID data [ 1120.461412] i2c-adapter i2c-2: unable to read EDID block. [ 1120.461415] i915 0000:00:02.0: HDMI Type A-1: no EDID data [ 1120.466030] i2c-adapter i2c-4: unable to read EDID block. [ 1120.466033] i915 0000:00:02.0: HDMI Type A-2: no EDID data [ 1120.470627] i2c-adapter i2c-4: unable to read EDID block. [ 1120.470629] i915 0000:00:02.0: HDMI Type A-2: no EDID data [ 1120.516543] [drm] TV-25: set mode NTSC 480i 0 [ 1120.656644] [drm] TV-25: set mode NTSC 480i 0 [ 1143.489916] i2c-adapter i2c-2: unable to read EDID block. [ 1143.489926] i915 0000:00:02.0: HDMI Type A-1: no EDID data [ 1143.494884] i2c-adapter i2c-2: unable to read EDID block. [ 1143.494887] i915 0000:00:02.0: HDMI Type A-1: no EDID data [ 1143.499569] i2c-adapter i2c-4: unable to read EDID block. [ 1143.499571] i915 0000:00:02.0: HDMI Type A-2: no EDID data [ 1143.504222] i2c-adapter i2c-4: unable to read EDID block. [ 1143.504224] i915 0000:00:02.0: HDMI Type A-2: no EDID data [ 1143.549893] [drm] TV-25: set mode NTSC 480i 0 [ 1143.691212] [drm] TV-25: set mode NTSC 480i 0 [ 1337.760383] CE: hpet increasing min_delta_ns to 15000 nsec [ 1481.895857] i2c-adapter i2c-2: unable to read EDID block. [ 1481.895861] i915 0000:00:02.0: HDMI Type A-1: no EDID data [ 1481.900278] i2c-adapter i2c-2: unable to read EDID block. [ 1481.900280] i915 0000:00:02.0: HDMI Type A-1: no EDID data [ 1481.904707] i2c-adapter i2c-4: unable to read EDID block. [ 1481.904709] i915 0000:00:02.0: HDMI Type A-2: no EDID data [ 1481.909139] i2c-adapter i2c-4: unable to read EDID block. [ 1481.909141] i915 0000:00:02.0: HDMI Type A-2: no EDID data [ 1481.954817] [drm] TV-25: set mode NTSC 480i 0 [ 1482.095349] [drm] TV-25: set mode NTSC 480i 0 [ 1535.251829] i2c-adapter i2c-2: unable to read EDID block. [ 1535.251834] i915 0000:00:02.0: HDMI Type A-1: no EDID data [ 1535.256247] i2c-adapter i2c-2: unable to read EDID block. [ 1535.256251] i915 0000:00:02.0: HDMI Type A-1: no EDID data [ 1535.260707] i2c-adapter i2c-4: unable to read EDID block. [ 1535.260709] i915 0000:00:02.0: HDMI Type A-2: no EDID data [ 1535.265117] i2c-adapter i2c-4: unable to read EDID block. [ 1535.265119] i915 0000:00:02.0: HDMI Type A-2: no EDID data [ 1535.310786] [drm] TV-25: set mode NTSC 480i 0 [ 1535.450895] [drm] TV-25: set mode NTSC 480i 0 [ 1663.240808] i2c-adapter i2c-2: unable to read EDID block. [ 1663.240811] i915 0000:00:02.0: HDMI Type A-1: no EDID data [ 1663.245518] i2c-adapter i2c-2: unable to read EDID block. [ 1663.245521] i915 0000:00:02.0: HDMI Type A-1: no EDID data [ 1663.249950] i2c-adapter i2c-4: unable to read EDID block. [ 1663.249952] i915 0000:00:02.0: HDMI Type A-2: no EDID data [ 1663.254848] i2c-adapter i2c-4: unable to read EDID block. [ 1663.254850] i915 0000:00:02.0: HDMI Type A-2: no EDID data [ 1663.300533] [drm] TV-25: set mode NTSC 480i 0 [ 1663.443187] [drm] TV-25: set mode NTSC 480i 0 [ 1704.818097] i2c-adapter i2c-2: unable to read EDID block. [ 1704.818101] i915 0000:00:02.0: HDMI Type A-1: no EDID data [ 1704.822593] i2c-adapter i2c-2: unable to read EDID block. [ 1704.822595] i915 0000:00:02.0: HDMI Type A-1: no EDID data [ 1704.827078] i2c-adapter i2c-4: unable to read EDID block. [ 1704.827080] i915 0000:00:02.0: HDMI Type A-2: no EDID data [ 1704.831562] i2c-adapter i2c-4: unable to read EDID block. [ 1704.831564] i915 0000:00:02.0: HDMI Type A-2: no EDID data [ 1704.877320] [drm] TV-25: set mode NTSC 480i 0 [ 1705.017842] [drm] TV-25: set mode NTSC 480i 0 [ 3226.103880] i2c-adapter i2c-2: unable to read EDID block. [ 3226.103884] i915 0000:00:02.0: HDMI Type A-1: no EDID data [ 3226.108628] i2c-adapter i2c-2: unable to read EDID block. [ 3226.108631] i915 0000:00:02.0: HDMI Type A-1: no EDID data [ 3226.113057] i2c-adapter i2c-4: unable to read EDID block. [ 3226.113059] i915 0000:00:02.0: HDMI Type A-2: no EDID data [ 3226.117940] i2c-adapter i2c-4: unable to read EDID block. [ 3226.117942] i915 0000:00:02.0: HDMI Type A-2: no EDID data [ 3226.163609] [drm] TV-25: set mode NTSC 480i 0 [ 3226.303679] [drm] TV-25: set mode NTSC 480i 0 [ 3233.711789] i2c-adapter i2c-2: unable to read EDID block. [ 3233.711792] i915 0000:00:02.0: HDMI Type A-1: no EDID data [ 3233.716508] i2c-adapter i2c-2: unable to read EDID block. [ 3233.716511] i915 0000:00:02.0: HDMI Type A-1: no EDID data [ 3233.721198] i2c-adapter i2c-4: unable to read EDID block. [ 3233.721200] i915 0000:00:02.0: HDMI Type A-2: no EDID data [ 3233.725599] i2c-adapter i2c-4: unable to read EDID block. [ 3233.725601] i915 0000:00:02.0: HDMI Type A-2: no EDID data [ 3233.771285] [drm] TV-25: set mode NTSC 480i 0 [ 3233.913064] [drm] TV-25: set mode NTSC 480i 0 [ 4865.571403] i2c-adapter i2c-2: unable to read EDID block. [ 4865.571406] i915 0000:00:02.0: HDMI Type A-1: no EDID data [ 4865.575810] i2c-adapter i2c-2: unable to read EDID block. [ 4865.575812] i915 0000:00:02.0: HDMI Type A-1: no EDID data [ 4865.580248] i2c-adapter i2c-4: unable to read EDID block. [ 4865.580250] i915 0000:00:02.0: HDMI Type A-2: no EDID data [ 4865.584651] i2c-adapter i2c-4: unable to read EDID block. [ 4865.584653] i915 0000:00:02.0: HDMI Type A-2: no EDID data [ 4865.630317] [drm] TV-25: set mode NTSC 480i 0 [ 4865.770497] [drm] TV-25: set mode NTSC 480i 0 [ 5016.829557] i2c-adapter i2c-2: unable to read EDID block. [ 5016.829561] i915 0000:00:02.0: HDMI Type A-1: no EDID data [ 5016.834029] i2c-adapter i2c-2: unable to read EDID block. [ 5016.834031] i915 0000:00:02.0: HDMI Type A-1: no EDID data [ 5016.838879] i2c-adapter i2c-4: unable to read EDID block. [ 5016.838882] i915 0000:00:02.0: HDMI Type A-2: no EDID data [ 5016.843533] i2c-adapter i2c-4: unable to read EDID block. [ 5016.843536] i915 0000:00:02.0: HDMI Type A-2: no EDID data [ 5016.889308] [drm] TV-25: set mode NTSC 480i 0 [ 5017.030112] [drm] TV-25: set mode NTSC 480i 0 [ 5243.237670] BUG: scheduling while atomic: swapper/0/0x10010000 [ 5243.237680] Modules linked in: binfmt_misc ppdev vboxnetflt vboxnetadp vboxdrv joydev lib80211_crypt_tkip lp pcmcia parport yenta_socket rsrc_nonstatic pcmcia_core psmouse wl(P) snd_hda_codec_intelhdmi sdhci_pci dell_wmi sdhci dell_laptop serio_raw led_class snd_hda_codec_idt snd_hda_intel snd_hda_codec snd_hwdep snd_pcm_oss snd_mixer_oss snd_pcm snd_seq_dummy snd_seq_oss snd_seq_midi snd_rawmidi snd_seq_midi_event snd_seq snd_timer iptable_filter snd_seq_device ip_tables x_tables lib80211 snd soundcore snd_page_alloc dcdbas fbcon tileblit font bitblit softcursor usb_storage ohci1394 ieee1394 tg3 i915 drm i2c_algo_bit video output intel_agp agpgart [ 5243.237800] [ 5243.237809] Pid: 0, comm: swapper Tainted: P (2.6.31-14-generic #48-Ubuntu) Latitude E5500 [ 5243.237816] EIP: 0060:[] EFLAGS: 00000202 CPU: 1 [ 5243.237829] EIP is at acpi_idle_enter_bm+0x255/0x286 [ 5243.237835] EAX: c080fe04 EBX: 000035f1 ECX: ffc2f606 EDX: 017b6000 [ 5243.237841] ESI: 00000000 EDI: f7208cc0 EBP: f707df70 ESP: f707df48 [ 5243.237846] DS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: 0068 [ 5243.237852] CR0: 8005003b CR2: b7558000 CR3: 0081a000 CR4: 000006d0 [ 5243.237858] DR0: 00000000 DR1: 00000000 DR2: 00000000 DR3: 00000000 [ 5243.237863] DR6: ffff0ff0 DR7: 00000400 [ 5243.237868] Call Trace: [ 5243.237882] [] cpuidle_idle_call+0x76/0xd0 [ 5243.237891] [] cpu_idle+0x8c/0xd0 [ 5243.237902] [] start_secondary+0xc6/0xc8 [ 5253.791862] usb 2-2: USB disconnect, address 2 [ 5259.071703] i2c-adapter i2c-2: unable to read EDID block. [ 5259.071707] i915 0000:00:02.0: HDMI Type A-1: no EDID data [ 5259.076337] i2c-adapter i2c-2: unable to read EDID block. [ 5259.076339] i915 0000:00:02.0: HDMI Type A-1: no EDID data [ 5259.080978] i2c-adapter i2c-4: unable to read EDID block. [ 5259.080980] i915 0000:00:02.0: HDMI Type A-2: no EDID data [ 5259.085590] i2c-adapter i2c-4: unable to read EDID block. [ 5259.085592] i915 0000:00:02.0: HDMI Type A-2: no EDID data [ 5259.134592] [drm] TV-25: set mode NTSC 480i 0 [ 5259.278094] [drm] TV-25: set mode NTSC 480i 0 [ 5264.301578] tg3 0000:09:00.0: PME# enabled [ 5266.424292] PM: Syncing filesystems ... done. [ 5266.538124] PM: Preparing system for mem sleep [ 5266.538127] Freezing user space processes ... (elapsed 0.00 seconds) done. [ 5266.538717] Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done. [ 5266.538767] PM: Entering mem sleep [ 5266.538777] Suspending console(s) (use no_console_suspend to debug) [ 5266.538999] sd 0:0:0:0: [sda] Synchronizing SCSI cache [ 5266.685623] sd 0:0:0:0: [sda] Stopping disk [ 5269.270676] serial 00:09: disabled [ 5269.271738] ACPI handle has no context! [ 5269.271743] sdhci-pci 0000:02:01.2: PME# disabled [ 5269.271749] sdhci-pci 0000:02:01.2: PCI INT C disabled [ 5269.271755] ACPI handle has no context! [ 5269.289246] ACPI handle has no context! [ 5269.304671] wl 0000:0c:00.0: PCI INT A disabled [ 5269.320372] ata_piix 0000:00:1f.5: PCI INT D disabled [ 5269.336396] ata_piix 0000:00:1f.2: PCI INT D disabled [ 5269.352223] ehci_hcd 0000:00:1d.7: PCI INT A disabled [ 5269.352232] uhci_hcd 0000:00:1d.2: PCI INT C disabled [ 5269.352240] uhci_hcd 0000:00:1d.1: PCI INT B disabled [ 5269.352247] uhci_hcd 0000:00:1d.0: PCI INT A disabled [ 5269.456290] HDA Intel 0000:00:1b.0: PCI INT A disabled [ 5269.472221] ehci_hcd 0000:00:1a.7: PCI INT C disabled [ 5269.472229] uhci_hcd 0000:00:1a.2: PCI INT C disabled [ 5269.472237] uhci_hcd 0000:00:1a.1: PCI INT B disabled [ 5269.472244] uhci_hcd 0000:00:1a.0: PCI INT A disabled [ 5269.553280] PM: suspend devices took 3.016 seconds [ 5269.553555] ehci_hcd 0000:00:1d.7: PME# disabled [ 5269.568306] ehci_hcd 0000:00:1a.7: PME# disabled [ 5269.591214] ACPI: Preparing to enter system sleep state S3 [ 5269.636570] Disabling non-boot CPUs ... [ 5269.740022] CPU 1 is now offline [ 5269.740025] SMP alternatives: switching to UP code [ 5269.745034] CPU0 attaching NULL sched-domain. [ 5269.745036] CPU1 attaching NULL sched-domain. [ 5269.745040] CPU0 attaching NULL sched-domain. [ 5269.745182] CPU1 is down [ 5269.745220] Extended CMOS year: 2000 [ 5269.745220] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 5269.745220] Back to C! [ 5269.745220] CPU0: Thermal LVT vector (0xfa) already installed [ 5269.745220] Extended CMOS year: 2000 [ 5269.745220] Enabling non-boot CPUs ... [ 5269.745220] SMP alternatives: switching to SMP code [ 5269.751883] Booting processor 1 APIC 0x1 ip 0x6000 [ 5269.744892] Initializing CPU#1 [ 5269.744892] Calibrating delay using timer specific routine.. 4788.48 BogoMIPS (lpj=9576977) [ 5269.744892] CPU: L1 I cache: 32K, L1 D cache: 32K [ 5269.744892] CPU: L2 cache: 3072K [ 5269.744892] CPU: Physical Processor ID: 0 [ 5269.744892] CPU: Processor Core ID: 1 [ 5269.744892] mce: CPU supports 6 MCE banks [ 5269.744892] CPU1: Thermal monitoring enabled (TM2) [ 5269.744892] x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106 [ 5269.842099] CPU1: Intel(R) Core(TM)2 Duo CPU P8600 @ 2.40GHz stepping 06 [ 5269.842186] CPU0 attaching NULL sched-domain. [ 5269.844025] Switched to high resolution mode on CPU 1 [ 5269.856021] CPU0 attaching sched-domain: [ 5269.856025] domain 0: span 0-1 level MC [ 5269.856028] groups: 0 1 [ 5269.856033] CPU1 attaching sched-domain: [ 5269.856034] domain 0: span 0-1 level MC [ 5269.856036] groups: 1 0 [ 5269.857019] CPU1 is up [ 5269.857022] ACPI: Waking up from system sleep state S3 [ 5270.088359] i915 0000:00:02.0: restoring config space at offset 0xf (was 0x100, writing 0x10b) [ 5270.088369] i915 0000:00:02.0: restoring config space at offset 0x8 (was 0x1, writing 0xefe9) [ 5270.088374] i915 0000:00:02.0: restoring config space at offset 0x6 (was 0xc, writing 0xe000000c) [ 5270.088382] i915 0000:00:02.0: restoring config space at offset 0x1 (was 0x900007, writing 0x900407) [ 5270.088410] pci 0000:00:02.1: restoring config space at offset 0x4 (was 0x4, writing 0xf6b00004) [ 5270.088416] pci 0000:00:02.1: restoring config space at offset 0x1 (was 0x900000, writing 0x900007) [ 5270.088434] uhci_hcd 0000:00:1a.0: restoring config space at offset 0xf (was 0x100, writing 0x10a) [ 5270.088451] uhci_hcd 0000:00:1a.0: restoring config space at offset 0x8 (was 0x1, writing 0x6f61) [ 5270.088467] uhci_hcd 0000:00:1a.0: restoring config space at offset 0x1 (was 0x2900000, writing 0x2900001) [ 5270.088493] uhci_hcd 0000:00:1a.1: restoring config space at offset 0xf (was 0x200, writing 0x205) [ 5270.088512] uhci_hcd 0000:00:1a.1: restoring config space at offset 0x8 (was 0x1, writing 0x6f81) [ 5270.088529] uhci_hcd 0000:00:1a.1: restoring config space at offset 0x1 (was 0x2900000, writing 0x2900001) [ 5270.088554] uhci_hcd 0000:00:1a.2: restoring config space at offset 0xf (was 0x300, writing 0x303) [ 5270.088571] uhci_hcd 0000:00:1a.2: restoring config space at offset 0x8 (was 0x1, writing 0x6fa1) [ 5270.088588] uhci_hcd 0000:00:1a.2: restoring config space at offset 0x1 (was 0x2900000, writing 0x2900001) [ 5270.088648] ehci_hcd 0000:00:1a.7: restoring config space at offset 0x1 (was 0x2900106, writing 0x2900102) [ 5270.088674] ehci_hcd 0000:00:1a.7: PME# disabled [ 5270.088699] HDA Intel 0000:00:1b.0: restoring config space at offset 0xf (was 0x100, writing 0x105) [ 5270.088723] HDA Intel 0000:00:1b.0: restoring config space at offset 0x4 (was 0xfebfc004, writing 0xf6afc004) [ 5270.088729] HDA Intel 0000:00:1b.0: restoring config space at offset 0x3 (was 0x0, writing 0x10) [ 5270.088738] HDA Intel 0000:00:1b.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100102) [ 5270.088779] pcieport-driver 0000:00:1c.0: restoring config space at offset 0xf (was 0x100, writing 0x20100) [ 5270.088793] pcieport-driver 0000:00:1c.0: restoring config space at offset 0x9 (was 0x10001, writing 0x1fff1) [ 5270.088801] pcieport-driver 0000:00:1c.0: restoring config space at offset 0x8 (was 0x0, writing 0xfff0) [ 5270.088807] pcieport-driver 0000:00:1c.0: restoring config space at offset 0x7 (was 0x20000000, writing 0x200000f0) [ 5270.088813] pcieport-driver 0000:00:1c.0: restoring config space at offset 0x6 (was 0x0, writing 0xb0b00) [ 5270.088825] pcieport-driver 0000:00:1c.0: restoring config space at offset 0x3 (was 0x810000, writing 0x810010) [ 5270.088833] pcieport-driver 0000:00:1c.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100507) [ 5270.088893] pcieport-driver 0000:00:1c.1: restoring config space at offset 0xf (was 0x200, writing 0x20200) [ 5270.088910] pcieport-driver 0000:00:1c.1: restoring config space at offset 0x9 (was 0x10001, writing 0x1fff1) [ 5270.088916] pcieport-driver 0000:00:1c.1: restoring config space at offset 0x8 (was 0x0, writing 0xf690f690) [ 5270.088922] pcieport-driver 0000:00:1c.1: restoring config space at offset 0x7 (was 0x20000000, writing 0x200000f0) [ 5270.088928] pcieport-driver 0000:00:1c.1: restoring config space at offset 0x6 (was 0x0, writing 0xc0c00) [ 5270.088939] pcieport-driver 0000:00:1c.1: restoring config space at offset 0x3 (was 0x810000, writing 0x810010) [ 5270.088948] pcieport-driver 0000:00:1c.1: restoring config space at offset 0x1 (was 0x100000, writing 0x100507) [ 5270.089008] pcieport-driver 0000:00:1c.4: restoring config space at offset 0xf (was 0x100, writing 0x20100) [ 5270.089024] pcieport-driver 0000:00:1c.4: restoring config space at offset 0x9 (was 0x10001, writing 0x1fff1) [ 5270.089030] pcieport-driver 0000:00:1c.4: restoring config space at offset 0x8 (was 0x0, writing 0xf680f680) [ 5270.089036] pcieport-driver 0000:00:1c.4: restoring config space at offset 0x7 (was 0x20000000, writing 0x200000f0) [ 5270.089042] pcieport-driver 0000:00:1c.4: restoring config space at offset 0x6 (was 0x0, writing 0x90900) [ 5270.089054] pcieport-driver 0000:00:1c.4: restoring config space at offset 0x3 (was 0x810000, writing 0x810010) [ 5270.089061] pcieport-driver 0000:00:1c.4: restoring config space at offset 0x1 (was 0x100000, writing 0x100407) [ 5270.089139] uhci_hcd 0000:00:1d.0: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001) [ 5270.089163] uhci_hcd 0000:00:1d.1: restoring config space at offset 0xf (was 0x200, writing 0x205) [ 5270.089180] uhci_hcd 0000:00:1d.1: restoring config space at offset 0x8 (was 0x1, writing 0x6f21) [ 5270.089198] uhci_hcd 0000:00:1d.1: restoring config space at offset 0x1 (was 0x2900000, writing 0x2900001) [ 5270.089223] uhci_hcd 0000:00:1d.2: restoring config space at offset 0xf (was 0x300, writing 0x303) [ 5270.089240] uhci_hcd 0000:00:1d.2: restoring config space at offset 0x8 (was 0x1, writing 0x6f41) [ 5270.089257] uhci_hcd 0000:00:1d.2: restoring config space at offset 0x1 (was 0x2900000, writing 0x2900001) [ 5270.089316] ehci_hcd 0000:00:1d.7: restoring config space at offset 0x1 (was 0x2900106, writing 0x2900102) [ 5270.089343] ehci_hcd 0000:00:1d.7: PME# disabled [ 5270.089367] pci 0000:00:1e.0: restoring config space at offset 0x9 (was 0x1fff1, writing 0x83f18001) [ 5270.089374] pci 0000:00:1e.0: restoring config space at offset 0x7 (was 0x2280e0f0, writing 0x22802020) [ 5270.089380] pci 0000:00:1e.0: restoring config space at offset 0x6 (was 0x20020200, writing 0x20060200) [ 5270.089452] pci 0000:00:1f.0: restoring config space at offset 0x1 (was 0x2100007, writing 0x2100107) [ 5270.089487] ata_piix 0000:00:1f.2: restoring config space at offset 0xf (was 0x400, writing 0x40a) [ 5270.089533] pci 0000:00:1f.3: restoring config space at offset 0xf (was 0x200, writing 0x20b) [ 5270.089558] pci 0000:00:1f.3: restoring config space at offset 0x4 (was 0x4, writing 0xf6afbf04) [ 5270.089568] pci 0000:00:1f.3: restoring config space at offset 0x1 (was 0x2800001, writing 0x2800103) [ 5270.089593] ata_piix 0000:00:1f.5: restoring config space at offset 0xf (was 0x400, writing 0x40a) [ 5270.089609] ata_piix 0000:00:1f.5: restoring config space at offset 0x9 (was 0x1, writing 0xeff1) [ 5270.089627] ata_piix 0000:00:1f.5: restoring config space at offset 0x1 (was 0x2b00000, writing 0x2b00007) [ 5270.089852] wl 0000:0c:00.0: restoring config space at offset 0xf (was 0x100, writing 0x10b) [ 5270.089899] wl 0000:0c:00.0: restoring config space at offset 0x4 (was 0x4, writing 0xf69fc004) [ 5270.089910] wl 0000:0c:00.0: restoring config space at offset 0x3 (was 0x0, writing 0x10) [ 5270.089923] wl 0000:0c:00.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100106) [ 5270.090052] tg3 0000:09:00.0: restoring config space at offset 0xf (was 0x1c6, writing 0x10b) [ 5270.090066] tg3 0000:09:00.0: restoring config space at offset 0xc (was 0x0, writing 0x413d0000) [ 5270.090090] tg3 0000:09:00.0: restoring config space at offset 0x5 (was 0x9fd7154d, writing 0x0) [ 5270.090099] tg3 0000:09:00.0: restoring config space at offset 0x4 (was 0x10770004, writing 0xf68f0004) [ 5270.090106] tg3 0000:09:00.0: restoring config space at offset 0x3 (was 0x0, writing 0x10) [ 5270.090117] tg3 0000:09:00.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100106) [ 5270.090171] yenta_cardbus 0000:02:01.0: restoring config space at offset 0xf (was 0x7000100, writing 0x580010a) [ 5270.090178] yenta_cardbus 0000:02:01.0: restoring config space at offset 0xe (was 0x0, writing 0x24fc) [ 5270.090185] yenta_cardbus 0000:02:01.0: restoring config space at offset 0xd (was 0x0, writing 0x2400) [ 5270.090191] yenta_cardbus 0000:02:01.0: restoring config space at offset 0xc (was 0x0, writing 0x20fc) [ 5270.090197] yenta_cardbus 0000:02:01.0: restoring config space at offset 0xb (was 0x0, writing 0x2000) [ 5270.090204] yenta_cardbus 0000:02:01.0: restoring config space at offset 0xa (was 0x0, writing 0x87fff000) [ 5270.090211] yenta_cardbus 0000:02:01.0: restoring config space at offset 0x9 (was 0x0, writing 0x84000000) [ 5270.090217] yenta_cardbus 0000:02:01.0: restoring config space at offset 0x8 (was 0x0, writing 0x83fff000) [ 5270.090224] yenta_cardbus 0000:02:01.0: restoring config space at offset 0x7 (was 0x0, writing 0x80000000) [ 5270.090232] yenta_cardbus 0000:02:01.0: restoring config space at offset 0x6 (was 0x0, writing 0xb0060302) [ 5270.090239] yenta_cardbus 0000:02:01.0: restoring config space at offset 0x4 (was 0x0, writing 0xf6700000) [ 5270.090247] yenta_cardbus 0000:02:01.0: restoring config space at offset 0x3 (was 0x820000, writing 0x82a800) [ 5270.090255] yenta_cardbus 0000:02:01.0: restoring config space at offset 0x1 (was 0x2100000, writing 0x2100007) [ 5270.228031] ohci1394 0000:02:01.1: restoring config space at offset 0xf (was 0x4020200, writing 0x402020b) [ 5270.228061] ohci1394 0000:02:01.1: restoring config space at offset 0x3 (was 0x800000, writing 0x804010) [ 5270.228069] ohci1394 0000:02:01.1: restoring config space at offset 0x1 (was 0x2100000, writing 0x2100106) [ 5270.228098] sdhci-pci 0000:02:01.2: restoring config space at offset 0xf (was 0x300, writing 0x305) [ 5270.228125] sdhci-pci 0000:02:01.2: restoring config space at offset 0x4 (was 0x0, writing 0xf67ff700) [ 5270.228131] sdhci-pci 0000:02:01.2: restoring config space at offset 0x3 (was 0x800000, writing 0x804010) [ 5270.228140] sdhci-pci 0000:02:01.2: restoring config space at offset 0x1 (was 0x2100000, writing 0x2100106) [ 5270.280187] i915 0000:00:02.0: setting latency timer to 64 [ 5270.341087] [drm] LVDS-8: set mode 1440x900 c [ 5270.361370] pci 0000:00:02.1: PME# disabled [ 5270.361381] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 [ 5270.361388] uhci_hcd 0000:00:1a.0: setting latency timer to 64 [ 5270.361419] usb usb3: root hub lost power or was reset [ 5270.361444] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 [ 5270.361451] uhci_hcd 0000:00:1a.1: setting latency timer to 64 [ 5270.361478] usb usb4: root hub lost power or was reset [ 5270.361499] uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22 [ 5270.361507] uhci_hcd 0000:00:1a.2: setting latency timer to 64 [ 5270.361535] usb usb5: root hub lost power or was reset [ 5270.361557] ehci_hcd 0000:00:1a.7: PME# disabled [ 5270.361562] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 22 (level, low) -> IRQ 22 [ 5270.361569] ehci_hcd 0000:00:1a.7: setting latency timer to 64 [ 5270.361583] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21 [ 5270.361590] HDA Intel 0000:00:1b.0: setting latency timer to 64 [ 5270.361618] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 [ 5270.361625] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [ 5270.361656] usb usb6: root hub lost power or was reset [ 5270.361677] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 [ 5270.361684] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [ 5270.361710] usb usb7: root hub lost power or was reset [ 5270.361733] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22 [ 5270.361740] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [ 5270.361767] usb usb8: root hub lost power or was reset [ 5270.361791] ehci_hcd 0000:00:1d.7: PME# disabled [ 5270.361796] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 20 (level, low) -> IRQ 20 [ 5270.361803] ehci_hcd 0000:00:1d.7: setting latency timer to 64 [ 5270.361817] pci 0000:00:1e.0: setting latency timer to 64 [ 5270.361828] ata_piix 0000:00:1f.2: PCI INT D -> GSI 19 (level, low) -> IRQ 19 [ 5270.361834] ata_piix 0000:00:1f.2: setting latency timer to 64 [ 5270.361891] ata_piix 0000:00:1f.5: PCI INT D -> GSI 19 (level, low) -> IRQ 19 [ 5270.361896] ata_piix 0000:00:1f.5: setting latency timer to 64 [ 5270.362112] wl 0000:0c:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 5270.362123] wl 0000:0c:00.0: setting latency timer to 64 [ 5270.418304] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[17] MMIO=[f67ff800-f67fffff] Max Packet=[2048] IR/IT contexts=[4/4] [ 5270.424548] sdhci-pci 0000:02:01.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 5270.534487] serial 00:09: activated [ 5270.589205] sd 0:0:0:0: [sda] Starting disk [ 5270.700398] ata4: SATA link down (SStatus 4 SControl 300) [ 5270.712673] ata3: SATA link down (SStatus 0 SControl 300) [ 5270.856464] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 5270.937006] ata2.00: configured for UDMA/100 [ 5272.872417] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 5272.897130] ata1.00: configured for UDMA/133 [ 5272.927420] PM: resume devices took 2.696 seconds [ 5272.927541] PM: Finishing wakeup. [ 5272.927545] Restarting tasks ... done. [ 5273.213781] tg3 0000:09:00.0: PME# disabled [ 5273.214016] tg3 0000:09:00.0: irq 28 for MSI/MSI-X [ 5273.312429] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 5273.951858] input: PS/2 Mouse as /devices/platform/i8042/serio1/input/input14 [ 5273.978831] input: AlpsPS/2 ALPS GlidePoint as /devices/platform/i8042/serio1/input/input15 [ 5275.092227] eth1: no IPv6 routers present [ 5275.187036] dell-wmi: Unknown key e043 pressed [ 5285.093335] dell-wmi: Unknown key e044 pressed [ 5296.580204] CE: hpet increasing min_delta_ns to 22500 nsec