kernel 2.6.31-14 report error in eth9x module
Affects | Status | Importance | Assigned to | Milestone | |
---|---|---|---|---|---|
linux (Ubuntu) |
Won't Fix
|
Undecided
|
Unassigned |
Bug Description
I'm having a lot of errors that precent the use of the wireless card.
[13711.364593] bridge-wlan0: is a Wireless Adapter
[13711.364600] bridge-wlan0: up
[13711.364606] bridge-wlan0: attached
[13724.040111] wlan0: no probe response from AP 00:12:bf:09:25:a4 - disassociating
[13724.064535] bridge-wlan0: disabling the bridge
[13724.102584] bridge-wlan0: down
[13724.102601] bridge-wlan0: detached
[13724.199849] BUG: unable to handle kernel paging request at 0000000000001000
[13724.199861] IP: [<ffffffff810e4
[13724.199877] PGD 15b49e067 PUD 144465067 PMD 0
[13724.199885] Oops: 0000 [#1] SMP
[13724.199890] last sysfs file: /sys/devices/
[13724.199896] CPU 1
[13724.199899] Modules linked in: nfs lockd nfs_acl auth_rpcgss sunrpc usbhid vmnet parport_pc vmblock vsock vmci vmmon ppdev kvm_amd kvm binfmt_misc joydev snd_hda_
[13724.199977] Pid: 785, comm: phy0 Tainted: P 2.6.31-14-server #48+ureadahead2
[13724.199982] RIP: 0010:[<
[13724.199992] RSP: 0018:ffff880143
[13724.199996] RAX: 0000000000000000 RBX: 0000000000001000 RCX: 0000000000008080
[13724.200000] RDX: ffff88012d06ad40 RSI: 00000000000000ff RDI: 0000000000001000
[13724.200004] RBP: ffff880143973b60 R08: 0000000000000000 R09: 0000000000000000
[13724.200008] R10: 0000000051eb851f R11: 0000000000000001 R12: ffff8800474d5d00
[13724.200012] R13: 0000000000000009 R14: ffff8800474d5d38 R15: 0000000000000000
[13724.200018] FS: 00007f6ac4c7b6f
[13724.200023] CS: 0010 DS: 0018 ES: 0018 CR0: 000000008005003b
[13724.200027] CR2: 0000000000001000 CR3: 000000014445e000 CR4: 00000000000006e0
[13724.200031] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[13724.200035] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
[13724.200040] Process phy0 (pid: 785, threadinfo ffff880143972000, task ffff8801437d0000)
[13724.200043] Stack:
[13724.200047] 000099d800000000 ffff880143f70000 0000006400000000 0000000000000001
[13724.200053] <0> ffff8800474d5d00 0000000000000009 ffff8800474d5d38 0000000000000000
[13724.200060] <0> ffff880143973b80 ffffffff8142c314 ffff8800474d5d00 ffff880143f682e0
[13724.200068] Call Trace:
[13724.200077] [<ffffffff8142c
[13724.200084] [<ffffffff8142b
[13724.200090] [<ffffffff8142b
[13724.200117] [<ffffffffa0100
[13724.200143] [<ffffffffa03ca
[13724.200158] [<ffffffffa03ca
[13724.200174] [<ffffffffa03cc
[13724.200188] [<ffffffffa03b4
[13724.200204] [<ffffffffa03cd
[13724.200220] [<ffffffffa03c8
[13724.200236] [<ffffffffa03c9
[13724.200255] [<ffffffffa00ff
[13724.200275] [<ffffffffa0104
[13724.200293] [<ffffffffa0104
[13724.200302] [<ffffffff81073
[13724.200310] [<ffffffff81073
[13724.200316] [<ffffffff81078
[13724.200323] [<ffffffff81073
[13724.200328] [<ffffffff81078
[13724.200334] [<ffffffff81013
[13724.200340] [<ffffffff81078
[13724.200345] [<ffffffff81013
[13724.200348] Code: 66 66 66 2e 0f 1f 84 00 00 00 00 00 55 48 89 e5 48 83 ec 40 48 89 5d d8 4c 89 65 e0 48 89 fb 4c 89 6d e8 4c 89 75 f0 4c 89 7d f8 <66> f7 07 00 c0 0f 85 ff 00 00 00 f0 ff 4f 08 0f 94 c0 84 c0 74
[13724.200398] RIP [<ffffffff810e4
[13724.200405] RSP <ffff880143973b20>
[13724.200408] CR2: 0000000000001000
[13724.200413] ---[ end trace 99cd69d7079fc619 ]---
I report too the lspci to fully qualify the nic:
00:00.0 Host bridge: Advanced Micro Devices [AMD] RS780 Host Bridge
00:01.0 PCI bridge: Acer Incorporated [ALI] Device 9602
00:03.0 PCI bridge: Advanced Micro Devices [AMD] RS780 PCI to PCI bridge (ext gfx port 1)
00:06.0 PCI bridge: Advanced Micro Devices [AMD] RS780 PCI to PCI bridge (PCIE port 2)
00:07.0 PCI bridge: Advanced Micro Devices [AMD] RS780 PCI to PCI bridge (PCIE port 3)
00:11.0 SATA controller: ATI Technologies Inc SB700/SB800 SATA Controller [AHCI mode]
00:12.0 USB Controller: ATI Technologies Inc SB700/SB800 USB OHCI0 Controller
00:12.1 USB Controller: ATI Technologies Inc SB700 USB OHCI1 Controller
00:12.2 USB Controller: ATI Technologies Inc SB700/SB800 USB EHCI Controller
00:13.0 USB Controller: ATI Technologies Inc SB700/SB800 USB OHCI0 Controller
00:13.2 USB Controller: ATI Technologies Inc SB700/SB800 USB EHCI Controller
00:14.0 SMBus: ATI Technologies Inc SBx00 SMBus Controller (rev 3c)
00:14.2 Audio device: ATI Technologies Inc SBx00 Azalia (Intel HDA)
00:14.3 ISA bridge: ATI Technologies Inc SB700/SB800 LPC host controller
00:14.4 PCI bridge: ATI Technologies Inc SBx00 PCI to PCI Bridge
00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration
00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map
00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller
00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control
01:05.0 VGA compatible controller: ATI Technologies Inc RS780M/RS780MN [Radeon HD 3200 Graphics]
08:00.0 Ethernet controller: Attansic Technology Corp. Device 1063 (rev c0)
09:00.0 Network controller: Atheros Communications Inc. AR928X Wireless Network Adapter (PCI-Express) (rev 01)
....09:00.0 Network controller: Atheros Communications Inc. AR928X Wireless Network Adapter (PCI-Express) (rev 01)
Subsystem: Foxconn International, Inc. Device e01f
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 19
Region 0: Memory at f0000000 (64-bit, non-prefetchable) [size=64K]
Capabilities: [40] Power Management version 2
Flags: PMEClk- DSI- D1+ D2- AuxCurrent=375mA PME(D0+
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [50] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable-
Address: 00000000 Data: 0000
Capabilities: [60] Express (v1) Legacy Endpoint, MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <512ns, L1 <64us
ExtTag- AttnBtn- AttnInd- PwrInd- RBE- FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 512 bytes
DevSta: CorrErr+ UncorrErr+ FatalErr- UnsuppReq+ AuxPwr- TransPend-
LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM unknown, Latency L0 <512ns, L1 <64us
ClockPM- Suprise- LLActRep- BwNot-
LnkCtl: ASPM L1 Enabled; RCB 128 bytes Disabled- Retrain- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
Capabilities: [90] MSI-X: Enable- Mask- TabSize=1
Vector table: BAR=0 offset=00000000
PBA: BAR=0 offset=00000000
Capabilities: [100] Advanced Error Reporting <?>
Capabilities: [140] Virtual Channel <?>
Capabilities: [160] Device Serial Number 00-00-00-
Kernel driver in use: ath9k
Kernel modules: ath9k
Here's the version by lsb_release -rd
Description: Ubuntu 9.10
Release: 9.10
and here's the kernel version
Linux angelo-laptop 2.6.31-14-server #48+ureadahead2
ProblemType: Bug
Architecture: amd64
Date: Mon Nov 2 16:30:06 2009
DistroRelease: Ubuntu 9.10
ExecutablePath: /usr/bin/yelp
InstallationMedia: Ubuntu 9.10 "Karmic Koala" - Release Candidate amd64 (20091020.3)
NonfreeKernelMo
Package: yelp 2.28.0-0ubuntu2
ProcEnviron:
PATH=(custom, user)
LANG=it_IT.UTF-8
SHELL=/bin/bash
ProcVersionSign
SourcePackage: yelp
Uname: Linux 2.6.31-14-server x86_64
affects: | ubuntu → linux (Ubuntu) |
2.6.15 == Dapper
2.6.17 == Edgy (no longer supported)
2.6.20 == Feisty (no longer supported)
2.6.22 == Gutsy (no longer supported)
2.6.24 == Hardy
2.6.27 == Intrepid
2.6.28 == Jaunty
2.6.31 == Karmic
2.6.32 == Lucid
*******
If they issue is fixed with Karmic, great. Mark the bug Fix Released.
If the issue remains, next have the try the following.
"Can you please try installing the following package. It contains an
updated compat wireless stack which may help.
linux-backports -modules- wireless- karmic- generic
If the issue still remains even after this, I'd encourage you to also wireless. kernel. org/en/ users/Download . This will allow us to cdimage. ubuntu. com/releases/ .
try installing the latest compat-wireless stack from upstream -
http://
escalate this issue to the upstream developers. Please let us know your
results. Thanks."
**********
This bug was reported a while ago and there hasn't been any activity in
it recently. We were wondering if this is still an issue? Can you try
with the latest Karmic 9.10 release of Ubuntu? ISO CD images are
available from http://
If the issue remains, could you run the following command from a >Accessories- >Terminal) while running Karmic. It
Terminal (Applications-
will automatically gather and attach updated debug information to this
report.
apport-collect -p linux 471163