[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.31-14-generic (buildd@rothera) (gcc version 4.4.1 (Ubuntu 4.4.1-4ubuntu8) ) #48-Ubuntu SMP Fri Oct 16 14:04:26 UTC 2009 (Ubuntu 2.6.31-14.48-generic) [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] NSC Geode by NSC [ 0.000000] Cyrix CyrixInstead [ 0.000000] Centaur CentaurHauls [ 0.000000] Transmeta GenuineTMx86 [ 0.000000] Transmeta TransmetaCPU [ 0.000000] UMC UMC UMC UMC [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable) [ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000000fff0000 (usable) [ 0.000000] BIOS-e820: 000000000fff0000 - 000000000fffec00 (ACPI data) [ 0.000000] BIOS-e820: 000000000fffec00 - 0000000010000000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved) [ 0.000000] DMI 2.3 present. [ 0.000000] last_pfn = 0xfff0 max_arch_pfn = 0x100000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-CBFFF write-protect [ 0.000000] CC000-DFFFF uncachable [ 0.000000] E0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000 mask FF0000000 write-back [ 0.000000] 1 disabled [ 0.000000] 2 disabled [ 0.000000] 3 disabled [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] PAT not supported by CPU. [ 0.000000] e820 update range: 0000000000002000 - 0000000000006000 (usable) ==> (reserved) [ 0.000000] Scanning 1 areas for low memory corruption [ 0.000000] modified physical RAM map: [ 0.000000] modified: 0000000000000000 - 0000000000002000 (usable) [ 0.000000] modified: 0000000000002000 - 0000000000006000 (reserved) [ 0.000000] modified: 0000000000006000 - 000000000009f800 (usable) [ 0.000000] modified: 000000000009f800 - 00000000000a0000 (reserved) [ 0.000000] modified: 00000000000e0000 - 0000000000100000 (reserved) [ 0.000000] modified: 0000000000100000 - 000000000fff0000 (usable) [ 0.000000] modified: 000000000fff0000 - 000000000fffec00 (ACPI data) [ 0.000000] modified: 000000000fffec00 - 0000000010000000 (ACPI NVS) [ 0.000000] modified: 00000000fff80000 - 0000000100000000 (reserved) [ 0.000000] initial memory mapped : 0 - 00c00000 [ 0.000000] init_memory_mapping: 0000000000000000-000000000fff0000 [ 0.000000] Using x86 segment limits to approximate NX protection [ 0.000000] 0000000000 - 0000400000 page 4k [ 0.000000] 0000400000 - 000fc00000 page 2M [ 0.000000] 000fc00000 - 000fff0000 page 4k [ 0.000000] kernel direct mapping tables up to fff0000 @ 7000-c000 [ 0.000000] RAMDISK: 0f895000 - 0ffdf0b6 [ 0.000000] ACPI: RSDP 000f7170 00014 (v00 PTLTD ) [ 0.000000] ACPI: RSDT 0fff4e36 0002C (v01 PTLTD RSDT 06041220 LTP 00000000) [ 0.000000] ACPI: FACP 0fffeb65 00074 (v01 IBM TP-T20 06041220 00000000) [ 0.000000] ACPI: DSDT 0fff4e62 09D03 (v01 IBM TP-T20 06041220 MSFT 0100000C) [ 0.000000] ACPI: FACS 0ffff000 00040 [ 0.000000] ACPI: BOOT 0fffebd9 00027 (v01 PTLTD $SBFTBL$ 06041220 LTP 00000001) [ 0.000000] ACPI: BIOS age (1999) fails cutoff (2000), acpi=force is required to enable ACPI [ 0.000000] ACPI: acpi=force override [ 0.000000] 0MB HIGHMEM available. [ 0.000000] 255MB LOWMEM available. [ 0.000000] mapped low ram: 0 - 0fff0000 [ 0.000000] low ram: 0 - 0fff0000 [ 0.000000] node 0 low ram: 00000000 - 0fff0000 [ 0.000000] node 0 bootmap 00008000 - 0000a000 [ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 000fff0000] [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] [ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000] [ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000] [ 0.000000] #3 [0000100000 - 00008a80a0] TEXT DATA BSS ==> [0000100000 - 00008a80a0] [ 0.000000] #4 [000f895000 - 000ffdf0b6] RAMDISK ==> [000f895000 - 000ffdf0b6] [ 0.000000] #5 [000009f800 - 0000100000] BIOS reserved ==> [000009f800 - 0000100000] [ 0.000000] #6 [00008a9000 - 00008ac0d9] BRK ==> [00008a9000 - 00008ac0d9] [ 0.000000] #7 [0000007000 - 0000008000] PGTABLE ==> [0000007000 - 0000008000] [ 0.000000] #8 [0000008000 - 000000a000] BOOTMAP ==> [0000008000 - 000000a000] [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000000 -> 0x00001000 [ 0.000000] Normal 0x00001000 -> 0x0000fff0 [ 0.000000] HighMem 0x0000fff0 -> 0x0000fff0 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[3] active PFN ranges [ 0.000000] 0: 0x00000000 -> 0x00000002 [ 0.000000] 0: 0x00000006 -> 0x0000009f [ 0.000000] 0: 0x00000100 -> 0x0000fff0 [ 0.000000] On node 0 totalpages: 65419 [ 0.000000] free_area_init_node: node 0, pgdat c0784900, node_mem_map c1000000 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 3963 pages, LIFO batch:0 [ 0.000000] Normal zone: 480 pages used for memmap [ 0.000000] Normal zone: 60944 pages, LIFO batch:15 [ 0.000000] Using APIC driver default [ 0.000000] ACPI: PM-Timer IO Port: 0x1008 [ 0.000000] SMP: Allowing 1 CPUs, 0 hotplug CPUs [ 0.000000] Local APIC disabled by BIOS -- you can enable it with "lapic" [ 0.000000] APIC: disable apic facility [ 0.000000] nr_irqs_gsi: 16 [ 0.000000] PM: Registered nosave memory: 0000000000002000 - 0000000000006000 [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000 [ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000 [ 0.000000] Allocating PCI resources starting at 10000000 (gap: 10000000:eff80000) [ 0.000000] NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:1 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 14 pages at c1202000, static data 35612 bytes [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 64907 [ 0.000000] Kernel command line: root=UUID=3ea60174-8021-489a-b69e-b0d8304ebef2 ro acpi=force quiet splash [ 0.000000] PID hash table entries: 1024 (order: 10, 4096 bytes) [ 0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes) [ 0.000000] Enabling fast FPU save and restore... done. [ 0.000000] Enabling unmasked SIMD FPU exception support... done. [ 0.000000] Initializing CPU#0 [ 0.000000] allocated 1310400 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] Initializing HighMem for node 0 (00000000:00000000) [ 0.000000] Memory: 242452k/262080k available (4565k kernel code, 18952k reserved, 2143k data, 540k init, 0k highmem) [ 0.000000] virtual kernel memory layout: [ 0.000000] fixmap : 0xfff1d000 - 0xfffff000 ( 904 kB) [ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB) [ 0.000000] vmalloc : 0xd07f0000 - 0xff7fe000 ( 752 MB) [ 0.000000] lowmem : 0xc0000000 - 0xcfff0000 ( 255 MB) [ 0.000000] .init : 0xc078e000 - 0xc0815000 ( 540 kB) [ 0.000000] .data : 0xc0575554 - 0xc078d308 (2143 kB) [ 0.000000] .text : 0xc0100000 - 0xc0575554 (4565 kB) [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.000000] SLUB: Genslabs=13, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.000000] NR_IRQS:2304 nr_irqs:256 [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 696.978 MHz processor. [ 0.001454] Console: colour VGA+ 80x25 [ 0.001466] console [tty0] enabled [ 0.004018] Calibrating delay loop (skipped), value calculated using timer frequency.. 1393.95 BogoMIPS (lpj=2787912) [ 0.004081] Security Framework initialized [ 0.004157] AppArmor: AppArmor initialized [ 0.004184] Mount-cache hash table entries: 512 [ 0.004566] Initializing cgroup subsys ns [ 0.004581] Initializing cgroup subsys cpuacct [ 0.004596] Initializing cgroup subsys memory [ 0.004623] Initializing cgroup subsys freezer [ 0.004632] Initializing cgroup subsys net_cls [ 0.004677] CPU: L1 I cache: 16K, L1 D cache: 16K [ 0.004688] CPU: L2 cache: 256K [ 0.004703] mce: CPU supports 5 MCE banks [ 0.004746] Performance Counters: [ 0.004755] no APIC, boot with the "lapic" boot parameter to force-enable it. [ 0.004763] no hardware sampling interrupt available. [ 0.004771] p6 PMU driver. [ 0.004828] ... version: 0 [ 0.004835] ... bit width: 32 [ 0.004843] ... generic counters: 2 [ 0.004850] ... value mask: 00000000ffffffff [ 0.004858] ... max period: 000000007fffffff [ 0.004866] ... fixed-purpose counters: 0 [ 0.004873] ... counter mask: 0000000000000003 [ 0.004887] Checking 'hlt' instruction... OK. [ 0.021516] SMP alternatives: switching to UP code [ 0.032066] Freeing SMP alternatives: 19k freed [ 0.032130] ACPI: Core revision 20090521 [ 0.060080] ACPI: setting ELCR to 0200 (from 0800) [ 0.068204] weird, boot CPU (#0) not listed by the BIOS. [ 0.068214] SMP motherboard not detected. [ 0.068223] Local APIC not detected. Using dummy APIC emulation. [ 0.068230] SMP disabled [ 0.068867] Brought up 1 CPUs [ 0.068884] Total of 1 processors activated (1393.95 BogoMIPS). [ 0.068938] CPU0 attaching NULL sched-domain. [ 0.069922] Booting paravirtualized kernel on bare hardware [ 0.070792] regulator: core version 0.5 [ 0.070839] Time: 17:16:04 Date: 11/01/09 [ 0.071046] NET: Registered protocol family 16 [ 0.071521] EISA bus registered [ 0.071576] ACPI: bus type pci registered [ 0.072322] PCI: PCI BIOS revision 2.10 entry at 0xfd94f, last bus=7 [ 0.072331] PCI: Using configuration type 1 for base access [ 0.076034] bio: create slab at 0 [ 0.078916] ACPI: EC: Look up EC in DSDT [ 0.489512] ACPI: Interpreter enabled [ 0.489532] ACPI: (supports S0 S1 S3 S4 S5) [ 0.489618] ACPI: Using PIC for interrupt routing [ 0.493273] ACPI: EC: non-query interrupt received, switching to interrupt mode [ 0.730361] ACPI: EC: GPE = 0x9, I/O: command/status = 0x66, data = 0x62 [ 0.730373] ACPI: EC: driver started in interrupt mode [ 0.730592] ACPI: Power Resource [PSER] (off) [ 0.730716] ACPI: Power Resource [PSIO] (on) [ 0.949297] ACPI: ACPI Dock Station Driver: 3 docks/bays found [ 0.949392] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 0.949520] pci 0000:00:00.0: reg 10 32bit mmio: [0xf8000000-0xfbffffff] [ 0.949665] pci 0000:00:02.0: reg 10 32bit mmio: [0x50000000-0x50000fff] [ 0.949700] pci 0000:00:02.0: supports D1 D2 [ 0.949710] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.949722] pci 0000:00:02.0: PME# disabled [ 0.949781] pci 0000:00:02.1: reg 10 32bit mmio: [0x50100000-0x50100fff] [ 0.949815] pci 0000:00:02.1: supports D1 D2 [ 0.949823] pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold [ 0.949835] pci 0000:00:02.1: PME# disabled [ 0.949901] pci 0000:00:03.0: reg 10 32bit mmio: [0xe8120000-0xe8120fff] [ 0.949918] pci 0000:00:03.0: reg 14 io port: [0x1800-0x183f] [ 0.949934] pci 0000:00:03.0: reg 18 32bit mmio: [0xe8100000-0xe811ffff] [ 0.949967] pci 0000:00:03.0: reg 30 32bit mmio: [0x000000-0x0fffff] [ 0.949998] pci 0000:00:03.0: supports D1 D2 [ 0.950007] pci 0000:00:03.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.950019] pci 0000:00:03.0: PME# disabled [ 0.950075] pci 0000:00:03.1: reg 10 io port: [0x1840-0x1847] [ 0.950091] pci 0000:00:03.1: reg 14 32bit mmio: [0xe8121000-0xe8121fff] [ 0.950150] pci 0000:00:03.1: supports D1 D2 [ 0.950159] pci 0000:00:03.1: PME# supported from D0 D1 D2 D3hot D3cold [ 0.950170] pci 0000:00:03.1: PME# disabled [ 0.950247] pci 0000:00:05.0: reg 10 32bit mmio: [0xe8122000-0xe8122fff] [ 0.950264] pci 0000:00:05.0: reg 14 32bit mmio: [0xe8000000-0xe80fffff] [ 0.950324] pci 0000:00:05.0: supports D1 D2 [ 0.950473] pci 0000:00:07.1: reg 20 io port: [0x1850-0x185f] [ 0.950566] pci 0000:00:07.2: reg 20 io port: [0x1860-0x187f] [ 0.950680] pci 0000:00:07.3: quirk: region 1000-103f claimed by PIIX4 ACPI [ 0.950692] pci 0000:00:07.3: quirk: region 1040-104f claimed by PIIX4 SMB [ 0.950707] pci 0000:00:07.3: PIIX4 devres C PIO at 15e8-15ef [ 0.950719] pci 0000:00:07.3: PIIX4 devres I PIO at 03f0-03f7 [ 0.950730] pci 0000:00:07.3: PIIX4 devres J PIO at 002e-002f [ 0.950848] pci 0000:01:00.0: reg 10 32bit mmio: [0xf0000000-0xf7ffffff] [ 0.950886] pci 0000:01:00.0: reg 30 32bit mmio: [0x000000-0x00ffff] [ 0.950917] pci 0000:01:00.0: supports D1 D2 [ 0.950979] pci 0000:00:01.0: bridge 32bit mmio: [0xf0000000-0xf7ffffff] [ 0.951044] pci_bus 0000:00: on NUMA node 0 [ 0.951060] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.951250] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT] [ 0.963467] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11) [ 0.964048] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11) [ 0.964605] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11) [ 0.965159] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11) [ 0.965890] SCSI subsystem initialized [ 0.966136] libata version 3.00 loaded. [ 0.966413] usbcore: registered new interface driver usbfs [ 0.966475] usbcore: registered new interface driver hub [ 0.966573] usbcore: registered new device driver usb [ 0.967051] ACPI: WMI: Mapper loaded [ 0.967059] PCI: Using ACPI for IRQ routing [ 0.967628] Bluetooth: Core ver 2.15 [ 0.967755] NET: Registered protocol family 31 [ 0.967763] Bluetooth: HCI device and connection manager initialized [ 0.967773] Bluetooth: HCI socket layer initialized [ 0.967781] NetLabel: Initializing [ 0.967787] NetLabel: domain hash size = 128 [ 0.967793] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.967840] NetLabel: unlabeled traffic allowed by default [ 0.975371] pnp: PnP ACPI init [ 0.975447] ACPI: bus type pnp registered [ 0.977751] pnp 00:00: mem resource (0x0-0x9ffff) overlaps 0000:00:03.0 BAR 6 (0x0-0xfffff), disabling [ 0.977769] pnp 00:00: mem resource (0xc0000-0xc3fff) overlaps 0000:00:03.0 BAR 6 (0x0-0xfffff), disabling [ 0.977783] pnp 00:00: mem resource (0xc4000-0xc7fff) overlaps 0000:00:03.0 BAR 6 (0x0-0xfffff), disabling [ 0.977797] pnp 00:00: mem resource (0xc8000-0xcbfff) overlaps 0000:00:03.0 BAR 6 (0x0-0xfffff), disabling [ 0.977810] pnp 00:00: mem resource (0xcc000-0xcbfff) overlaps 0000:00:03.0 BAR 6 (0x0-0xfffff), disabling [ 0.977824] pnp 00:00: mem resource (0xd0000-0xcffff) overlaps 0000:00:03.0 BAR 6 (0x0-0xfffff), disabling [ 0.977838] pnp 00:00: mem resource (0xd4000-0xd3fff) overlaps 0000:00:03.0 BAR 6 (0x0-0xfffff), disabling [ 0.977852] pnp 00:00: mem resource (0xd8000-0xd7fff) overlaps 0000:00:03.0 BAR 6 (0x0-0xfffff), disabling [ 0.977865] pnp 00:00: mem resource (0xdc000-0xdbfff) overlaps 0000:00:03.0 BAR 6 (0x0-0xfffff), disabling [ 0.977879] pnp 00:00: mem resource (0xe0000-0xe3fff) overlaps 0000:00:03.0 BAR 6 (0x0-0xfffff), disabling [ 0.977893] pnp 00:00: mem resource (0xe4000-0xe7fff) overlaps 0000:00:03.0 BAR 6 (0x0-0xfffff), disabling [ 0.977907] pnp 00:00: mem resource (0xe8000-0xebfff) overlaps 0000:00:03.0 BAR 6 (0x0-0xfffff), disabling [ 0.977920] pnp 00:00: mem resource (0xec000-0xeffff) overlaps 0000:00:03.0 BAR 6 (0x0-0xfffff), disabling [ 0.977934] pnp 00:00: mem resource (0xf0000-0xfffff) overlaps 0000:00:03.0 BAR 6 (0x0-0xfffff), disabling [ 1.092140] pnp: PnP ACPI: found 15 devices [ 1.092151] ACPI: ACPI bus type pnp unregistered [ 1.092164] PnPBIOS: Disabled by ACPI PNP [ 1.092208] system 00:00: iomem range 0x100000-0xfffffff could not be reserved [ 1.092223] system 00:00: iomem range 0xfff80000-0xffffffff has been reserved [ 1.092250] system 00:02: ioport range 0x1000-0x103f has been reserved [ 1.092262] system 00:02: ioport range 0x1040-0x104f has been reserved [ 1.092274] system 00:02: ioport range 0xfe00-0xfe0f has been reserved [ 1.092302] system 00:09: ioport range 0x15e0-0x15ef has been reserved [ 1.127396] AppArmor: AppArmor Filesystem Enabled [ 1.127494] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01 [ 1.127504] pci 0000:00:01.0: IO window: disabled [ 1.127518] pci 0000:00:01.0: MEM window: 0xf0000000-0xf7ffffff [ 1.127531] pci 0000:00:01.0: PREFETCH window: 0x20000000-0x200fffff [ 1.127544] pci 0000:00:02.0: CardBus bridge, secondary bus 0000:02 [ 1.127554] pci 0000:00:02.0: IO window: 0x001400-0x0014ff [ 1.127567] pci 0000:00:02.0: IO window: 0x001c00-0x001cff [ 1.127579] pci 0000:00:02.0: PREFETCH window: 0x10000000-0x13ffffff [ 1.127592] pci 0000:00:02.0: MEM window: 0x14000000-0x17ffffff [ 1.127604] pci 0000:00:02.1: CardBus bridge, secondary bus 0000:06 [ 1.127613] pci 0000:00:02.1: IO window: 0x002000-0x0020ff [ 1.127625] pci 0000:00:02.1: IO window: 0x002400-0x0024ff [ 1.127637] pci 0000:00:02.1: PREFETCH window: 0x18000000-0x1bffffff [ 1.127650] pci 0000:00:02.1: MEM window: 0x1c000000-0x1fffffff [ 1.127826] pci 0000:00:02.0: power state changed by ACPI to D0 [ 1.128786] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11 [ 1.128797] PCI: setting IRQ 11 as level-triggered [ 1.128811] pci 0000:00:02.0: PCI INT A -> Link[LNKA] -> GSI 11 (level, low) -> IRQ 11 [ 1.128922] pci 0000:00:02.1: power state changed by ACPI to D0 [ 1.129811] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11 [ 1.129824] pci 0000:00:02.1: PCI INT B -> Link[LNKB] -> GSI 11 (level, low) -> IRQ 11 [ 1.129845] pci_bus 0000:00: resource 0 io: [0x00-0xffff] [ 1.129856] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff] [ 1.129867] pci_bus 0000:01: resource 1 mem: [0xf0000000-0xf7ffffff] [ 1.129878] pci_bus 0000:01: resource 2 pref mem [0x20000000-0x200fffff] [ 1.129889] pci_bus 0000:02: resource 0 io: [0x1400-0x14ff] [ 1.129898] pci_bus 0000:02: resource 1 io: [0x1c00-0x1cff] [ 1.129909] pci_bus 0000:02: resource 2 pref mem [0x10000000-0x13ffffff] [ 1.129919] pci_bus 0000:02: resource 3 mem: [0x14000000-0x17ffffff] [ 1.129930] pci_bus 0000:06: resource 0 io: [0x2000-0x20ff] [ 1.129940] pci_bus 0000:06: resource 1 io: [0x2400-0x24ff] [ 1.129950] pci_bus 0000:06: resource 2 pref mem [0x18000000-0x1bffffff] [ 1.129961] pci_bus 0000:06: resource 3 mem: [0x1c000000-0x1fffffff] [ 1.130094] NET: Registered protocol family 2 [ 1.130457] IP route cache hash table entries: 2048 (order: 1, 8192 bytes) [ 1.131489] TCP established hash table entries: 8192 (order: 4, 65536 bytes) [ 1.131678] TCP bind hash table entries: 8192 (order: 4, 65536 bytes) [ 1.131859] TCP: Hash tables configured (established 8192 bind 8192) [ 1.131868] TCP reno registered [ 1.132225] NET: Registered protocol family 1 [ 1.132451] Trying to unpack rootfs image as initramfs... [ 1.628110] Switched to high resolution mode on CPU 0 [ 1.848821] Freeing initrd memory: 7464k freed [ 1.890585] Simple Boot Flag at 0x35 set to 0x1 [ 1.894351] cpufreq-nforce2: No nForce2 chipset. [ 1.894441] Scanning for low memory corruption every 60 seconds [ 1.894846] audit: initializing netlink socket (disabled) [ 1.894903] type=2000 audit(1257095765.892:1): initialized [ 1.925256] HugeTLB registered 4 MB page size, pre-allocated 0 pages [ 1.931446] VFS: Disk quotas dquot_6.5.2 [ 1.931693] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 1.934066] fuse init (API version 7.12) [ 1.934400] msgmni has been set to 488 [ 1.935204] alg: No test for stdrng (krng) [ 1.935256] io scheduler noop registered [ 1.935265] io scheduler anticipatory registered [ 1.935273] io scheduler deadline registered [ 1.935498] io scheduler cfq registered (default) [ 1.935536] pci 0000:00:00.0: Limiting direct PCI/PCI transfers [ 1.935599] pci 0000:00:03.0: Firmware left e100 interrupts enabled; disabling [ 1.935660] pci 0000:01:00.0: Boot video device [ 1.935909] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 1.935993] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 1.937621] ACPI: AC Adapter [AC] (on-line) [ 1.937844] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0 [ 1.937859] ACPI: Power Button [PWRF] [ 1.938017] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input1 [ 1.939105] ACPI: Lid Switch [LID] [ 1.939266] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2 [ 1.939281] ACPI: Sleep Button [SLPB] [ 1.939759] Marking TSC unstable due to TSC halts in idle [ 1.939808] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3]) [ 1.939892] processor LNXCPU:00: registered as cooling_device0 [ 1.939917] ACPI: Processor [CPU0] (supports 8 throttling states) [ 2.057194] thermal LNXTHERM:01: registered as thermal_zone0 [ 2.057224] ACPI: Thermal Zone [THM0] (43 C) [ 2.057398] isapnp: Scanning for PnP cards... [ 2.411159] isapnp: No Plug & Play device found [ 2.415684] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 2.418586] serial 00:0c: activated [ 2.418818] 00:0c: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 2.420077] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11 [ 2.420093] serial 0000:00:03.1: PCI INT A -> Link[LNKC] -> GSI 11 (level, low) -> IRQ 11 [ 2.423711] brd: module loaded [ 2.425574] loop: module loaded [ 2.425909] input: Macintosh mouse button emulation as /devices/virtual/input/input3 [ 2.426298] ata_piix 0000:00:07.1: version 2.13 [ 2.426908] scsi0 : ata_piix [ 2.427298] scsi1 : ata_piix [ 2.482653] ACPI: Battery Slot [BAT0] (battery present) [ 2.642528] ata1: PATA max UDMA/33 cmd 0x1f0 ctl 0x3f6 bmdma 0x1850 irq 14 [ 2.642541] ata2: PATA max UDMA/33 cmd 0x170 ctl 0x376 bmdma 0x1858 irq 15 [ 2.645555] Fixed MDIO Bus: probed [ 2.645696] PPP generic driver version 2.4.2 [ 2.646071] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 2.646145] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 2.646200] uhci_hcd: USB Universal Host Controller Interface driver [ 2.647406] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11 [ 2.647424] uhci_hcd 0000:00:07.2: PCI INT D -> Link[LNKD] -> GSI 11 (level, low) -> IRQ 11 [ 2.647450] uhci_hcd 0000:00:07.2: UHCI Host Controller [ 2.647687] uhci_hcd 0000:00:07.2: new USB bus registered, assigned bus number 1 [ 2.647744] uhci_hcd 0000:00:07.2: irq 11, io base 0x00001860 [ 2.648619] usb usb1: configuration #1 chosen from 1 choice [ 2.648736] hub 1-0:1.0: USB hub found [ 2.648771] hub 1-0:1.0: 2 ports detected [ 2.649160] PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12 [ 2.665965] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 2.665987] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 2.666205] mice: PS/2 mouse device common for all mice [ 2.666563] rtc_cmos 00:06: RTC can wake from S4 [ 2.666685] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0 [ 2.666720] rtc0: alarms up to one month, y3k, 242 bytes nvram [ 2.667099] device-mapper: uevent: version 1.0.3 [ 2.667473] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com [ 2.667769] device-mapper: multipath: version 1.1.0 loaded [ 2.667779] device-mapper: multipath round-robin: version 1.0.0 loaded [ 2.668384] EISA: Probing bus 0 at eisa.0 [ 2.668402] Cannot allocate resource for EISA slot 1 [ 2.668412] Cannot allocate resource for EISA slot 2 [ 2.668443] EISA: Detected 0 cards. [ 2.669240] cpuidle: using governor ladder [ 2.669453] cpuidle: using governor menu [ 2.671468] TCP cubic registered [ 2.672169] NET: Registered protocol family 10 [ 2.673853] lo: Disabled Privacy Extensions [ 2.675073] NET: Registered protocol family 17 [ 2.675147] Bluetooth: L2CAP ver 2.13 [ 2.675154] Bluetooth: L2CAP socket layer initialized [ 2.675165] Bluetooth: SCO (Voice Link) ver 0.6 [ 2.675172] Bluetooth: SCO socket layer initialized [ 2.675328] Bluetooth: RFCOMM TTY layer initialized [ 2.675340] Bluetooth: RFCOMM socket layer initialized [ 2.675348] Bluetooth: RFCOMM ver 1.11 [ 2.675429] Using IPI No-Shortcut mode [ 2.675720] PM: Resume from disk failed. [ 2.675761] registered taskstats version 1 [ 2.676166] Magic number: 1:627:288 [ 2.676235] tty tty21: hash matches [ 2.676351] rtc_cmos 00:06: setting system clock to 2009-11-01 17:16:07 UTC (1257095767) [ 2.676363] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 2.676370] EDD information not available. [ 2.679480] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4 [ 2.812594] ata2.00: ATAPI: TOSHIBA DVD-ROM SD-C2302, 1127, max UDMA/33 [ 2.828450] ata2.00: configured for UDMA/33 [ 2.900650] ata1.00: ATA-6: FUJITSU MHT2080AT PL, 0022, max UDMA/100 [ 2.900662] ata1.00: 156301488 sectors, multi 16: LBA [ 2.916586] ata1.00: configured for UDMA/33 [ 2.916998] scsi 0:0:0:0: Direct-Access ATA FUJITSU MHT2080A 0022 PQ: 0 ANSI: 5 [ 2.917464] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 2.917628] sd 0:0:0:0: [sda] 156301488 512-byte logical blocks: (80.0 GB/74.5 GiB) [ 2.917824] sd 0:0:0:0: [sda] Write Protect is off [ 2.917836] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 2.917938] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.918438] sda: [ 2.920484] scsi 1:0:0:0: CD-ROM TOSHIBA DVD-ROM SD-C2302 1127 PQ: 0 ANSI: 5 [ 2.928216] sr0: scsi3-mmc drive: 24x/24x cd/rw xa/form2 cdda tray [ 2.928228] Uniform CD-ROM driver Revision: 3.20 [ 2.928547] sr 1:0:0:0: Attached scsi CD-ROM sr0 [ 2.928751] sr 1:0:0:0: Attached scsi generic sg1 type 5 [ 2.989174] sda1 sda2 < sda5 sda6 sda7 > [ 3.063530] sd 0:0:0:0: [sda] Attached SCSI disk [ 3.063591] Freeing unused kernel memory: 540k freed [ 3.066247] Write protecting the kernel text: 4568k [ 3.066384] Write protecting the kernel read-only data: 1836k [ 3.124081] Clocksource tsc unstable (delta = -128085026 ns) [ 3.787024] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A03:00/device:08/device:09/input/input5 [ 3.787164] ACPI: Video Device [VID] (multi-head: yes rom: no post: no) [ 3.854937] Floppy drive(s): fd0 is 1.44M [ 3.882641] FDC 0 is a National Semiconductor PC87306 [ 4.170569] Linux agpgart interface v0.103 [ 4.206039] agpgart-intel 0000:00:00.0: Intel 440BX Chipset [ 4.210890] agpgart-intel 0000:00:00.0: AGP aperture is 64M @ 0xf8000000 [ 4.232420] e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI [ 4.232433] e100: Copyright(c) 1999-2006 Intel Corporation [ 4.232556] e100 0000:00:03.0: PCI INT A -> Link[LNKC] -> GSI 11 (level, low) -> IRQ 11 [ 4.317030] e100: 0000:00:03.0: e100_eeprom_load: EEPROM corrupted [ 4.319204] e100 0000:00:03.0: PCI INT A disabled [ 4.319257] e100: probe of 0000:00:03.0 failed with error -11 [ 5.544292] PM: Starting manual resume from disk [ 5.544310] PM: Resume from partition 8:7 [ 5.544317] PM: Checking hibernation image. [ 5.545291] PM: Resume from disk failed. [ 5.590142] kjournald starting. Commit interval 5 seconds [ 5.590186] EXT3-fs: mounted filesystem with writeback data mode. [ 6.848153] type=1505 audit(1257095771.671:2): operation="profile_load" pid=333 name=/usr/share/gdm/guest-session/Xsession [ 6.890254] type=1505 audit(1257095771.711:3): operation="profile_load" pid=334 name=/sbin/dhclient3 [ 6.891865] type=1505 audit(1257095771.711:4): operation="profile_load" pid=334 name=/usr/lib/NetworkManager/nm-dhcp-client.action [ 6.892841] type=1505 audit(1257095771.715:5): operation="profile_load" pid=334 name=/usr/lib/connman/scripts/dhclient-script [ 6.969512] type=1505 audit(1257095771.791:6): operation="profile_load" pid=335 name=/usr/bin/evince [ 6.998639] type=1505 audit(1257095771.819:7): operation="profile_load" pid=335 name=/usr/bin/evince-previewer [ 7.016612] type=1505 audit(1257095771.839:8): operation="profile_load" pid=335 name=/usr/bin/evince-thumbnailer [ 7.090296] type=1505 audit(1257095771.911:9): operation="profile_load" pid=337 name=/usr/lib/cups/backend/cups-pdf [ 7.092443] type=1505 audit(1257095771.915:10): operation="profile_load" pid=337 name=/usr/sbin/cupsd [ 7.138904] type=1505 audit(1257095771.959:11): operation="profile_load" pid=338 name=/usr/sbin/tcpdump [ 8.242130] Adding 313228k swap on /dev/sda7. Priority:-1 extents:1 across:313228k [ 9.462909] udev: starting version 147 [ 11.143682] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 11.254665] irda_init() [ 11.254709] NET: Registered protocol family 23 [ 11.622228] nsc-ircc 00:0e: activated [ 11.622246] nsc_ircc_pnp_probe() : From PnP, found firbase 0x2F8 ; irq 3 ; dma 1. [ 11.622302] nsc-ircc, chip->init [ 11.622311] nsc-ircc, Found chip at base=0x02e [ 11.622346] nsc-ircc, driver loaded (Dag Brattli) [ 11.624746] IrDA: Registered device irda0 [ 11.624756] nsc-ircc, Using dongle: IBM31T1100 or Temic TFDS6000/TFDS6500 [ 12.055423] EXT3 FS on sda5, internal journal [ 12.171880] piix4_smbus 0000:00:07.3: IBM system detected; this module may corrupt your serial eeprom! Refusing to load module! [ 12.171913] piix4_smbus: probe of 0000:00:07.3 failed with error -1 [ 12.182617] Non-volatile memory driver v1.3 [ 12.572493] parport_pc 00:0d: reported by Plug and Play ACPI [ 12.572549] parport0: PC-style at 0x3bc, irq 7 [PCSPP,TRISTATE] [ 12.599302] lp: driver loaded but no devices found [ 12.660559] lp0: using parport0 (interrupt-driven). [ 12.999061] ppdev: user-space parallel port driver [ 13.236576] yenta_cardbus 0000:00:02.0: CardBus bridge found [1014:0130] [ 13.236608] yenta_cardbus 0000:00:02.0: Using INTVAL to route CSC interrupts to PCI [ 13.236619] yenta_cardbus 0000:00:02.0: Routing CardBus interrupts to PCI [ 13.236632] yenta_cardbus 0000:00:02.0: TI: mfunc 0x00001000, devctl 0x66 [ 13.249273] kjournald starting. Commit interval 5 seconds [ 13.300590] EXT3 FS on sda1, internal journal [ 13.300616] EXT3-fs: mounted filesystem with writeback data mode. [ 13.318240] ip_tables: (C) 2000-2006 Netfilter Core Team [ 13.426625] thinkpad_acpi: ThinkPad ACPI Extras v0.23 [ 13.426637] thinkpad_acpi: http://ibm-acpi.sf.net/ [ 13.426645] thinkpad_acpi: ThinkPad BIOS IYET61WW (1.22 ), EC unknown [ 13.450913] Registered led device: tpacpi::thinklight [ 13.451122] Registered led device: tpacpi::power [ 13.451184] Registered led device: tpacpi::standby [ 13.460341] input: ThinkPad Extra Buttons as /devices/virtual/input/input6 [ 13.469800] yenta_cardbus 0000:00:02.0: ISA IRQ mask 0x0430, PCI irq 11 [ 13.469814] yenta_cardbus 0000:00:02.0: Socket status: 30000006 [ 13.470314] yenta_cardbus 0000:00:02.1: CardBus bridge found [1014:0130] [ 13.470342] yenta_cardbus 0000:00:02.1: Using INTVAL to route CSC interrupts to PCI [ 13.470352] yenta_cardbus 0000:00:02.1: Routing CardBus interrupts to PCI [ 13.470365] yenta_cardbus 0000:00:02.1: TI: mfunc 0x00001000, devctl 0x66 [ 13.500623] psmouse serio1: ID: 10 00 64 [ 13.700504] yenta_cardbus 0000:00:02.1: ISA IRQ mask 0x0430, PCI irq 11 [ 13.700518] yenta_cardbus 0000:00:02.1: Socket status: 30000020 [ 14.230615] IBM TrackPoint firmware: 0x0e, buttons: 3/3 [ 14.274240] input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/input/input7 [ 14.336081] pcmcia_socket pcmcia_socket1: pccard: CardBus card inserted into slot 1 [ 14.336157] pci 0000:06:00.0: reg 10 io port: [0x00-0xff] [ 14.336175] pci 0000:06:00.0: reg 14 32bit mmio: [0x000000-0x0001ff] [ 14.336254] pci 0000:06:00.0: supports D1 D2 [ 14.336263] pci 0000:06:00.0: PME# supported from D0 D1 D2 D3hot [ 14.336276] pci 0000:06:00.0: PME# disabled [ 14.800470] pcmcia_socket pcmcia_socket1: cs: IO port probe 0x100-0x3af: clean. [ 14.801438] pcmcia_socket pcmcia_socket1: cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7 [ 14.801897] pcmcia_socket pcmcia_socket1: cs: IO port probe 0x820-0x8ff: clean. [ 14.802301] pcmcia_socket pcmcia_socket1: cs: IO port probe 0xc00-0xcf7: clean. [ 14.803114] pcmcia_socket pcmcia_socket1: cs: IO port probe 0xa00-0xaff: clean. [ 15.056905] cfg80211: Calling CRDA to update world regulatory domain [ 15.271196] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x100-0x3af: clean. [ 15.274377] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7 [ 15.274898] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x820-0x8ff: clean. [ 15.275301] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xc00-0xcf7: clean. [ 15.276190] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xa00-0xaff: clean. [ 15.881646] cfg80211: World regulatory domain updated: [ 15.881662] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 15.881675] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 15.881686] (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 15.881697] (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 15.881707] (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 15.881718] (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 15.960357] rtl8180 0000:06:00.0: enabling device (0000 -> 0003) [ 15.960389] rtl8180 0000:06:00.0: PCI INT A -> Link[LNKB] -> GSI 11 (level, low) -> IRQ 11 [ 15.960421] rtl8180 0000:06:00.0: setting latency timer to 64 [ 16.200333] phy0: Selected rate control algorithm 'minstrel' [ 16.203017] phy0: hwaddr 00:40:f4:ad:7e:cf, RTL8180vF + Philips [ 16.428226] kjournald starting. Commit interval 5 seconds [ 16.463613] EXT3 FS on sda6, internal journal [ 16.463638] EXT3-fs: mounted filesystem with writeback data mode. [ 16.723128] Sound Fusion CS46xx 0000:00:05.0: PCI INT A -> Link[LNKA] -> GSI 11 (level, low) -> IRQ 11 [ 17.343280] gameport: CS46xx Gameport is pci0000:00:05.0/gameport0, speed 1807kHz [ 20.342148] type=1505 audit(1257095785.163:12): operation="profile_replace" pid=756 name=/usr/share/gdm/guest-session/Xsession [ 20.355589] type=1505 audit(1257095785.175:13): operation="profile_replace" pid=757 name=/sbin/dhclient3 [ 20.357399] type=1505 audit(1257095785.179:14): operation="profile_replace" pid=757 name=/usr/lib/NetworkManager/nm-dhcp-client.action [ 20.358321] type=1505 audit(1257095785.179:15): operation="profile_replace" pid=757 name=/usr/lib/connman/scripts/dhclient-script [ 20.387270] type=1505 audit(1257095785.207:16): operation="profile_replace" pid=758 name=/usr/bin/evince [ 20.464250] type=1505 audit(1257095785.287:17): operation="profile_replace" pid=758 name=/usr/bin/evince-previewer [ 20.483287] type=1505 audit(1257095785.303:18): operation="profile_replace" pid=758 name=/usr/bin/evince-thumbnailer [ 20.511020] type=1505 audit(1257095785.331:19): operation="profile_replace" pid=760 name=/usr/lib/cups/backend/cups-pdf [ 20.514809] type=1505 audit(1257095785.335:20): operation="profile_replace" pid=760 name=/usr/sbin/cupsd [ 20.524500] type=1505 audit(1257095785.347:21): operation="profile_replace" pid=761 name=/usr/sbin/tcpdump [ 26.520206] ADDRCONF(NETDEV_UP): wlan0: link is not ready