[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.32-24-generic (buildd@palmer) (gcc version 4.4.3 (Ubuntu 4.4.3-4ubuntu5) ) #42-Ubuntu SMP Fri Aug 20 14:24:04 UTC 2010 (Ubuntu 2.6.32-24.42-generic 2.6.32.15+drm33.5) [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] NSC Geode by NSC [ 0.000000] Cyrix CyrixInstead [ 0.000000] Centaur CentaurHauls [ 0.000000] Transmeta GenuineTMx86 [ 0.000000] Transmeta TransmetaCPU [ 0.000000] UMC UMC UMC UMC [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f400 (usable) [ 0.000000] BIOS-e820: 000000000009f400 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000d0000 - 00000000000d8000 (reserved) [ 0.000000] BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000003bdf0000 (usable) [ 0.000000] BIOS-e820: 000000003bdf0000 - 000000003bdfb000 (ACPI data) [ 0.000000] BIOS-e820: 000000003bdfb000 - 000000003be00000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000003be00000 - 000000003c000000 (reserved) [ 0.000000] BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved) [ 0.000000] DMI 2.3 present. [ 0.000000] last_pfn = 0x3bdf0 max_arch_pfn = 0x100000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-C7FFF write-protect [ 0.000000] C8000-EFFFF uncachable [ 0.000000] F0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000 mask FE0000000 write-back [ 0.000000] 1 base 020000000 mask FF0000000 write-back [ 0.000000] 2 base 030000000 mask FF8000000 write-back [ 0.000000] 3 base 038000000 mask FFC000000 write-back [ 0.000000] 4 base 03BE00000 mask FFFE00000 uncachable [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] e820 update range: 0000000000002000 - 0000000000006000 (usable) ==> (reserved) [ 0.000000] Scanning 1 areas for low memory corruption [ 0.000000] modified physical RAM map: [ 0.000000] modified: 0000000000000000 - 0000000000002000 (usable) [ 0.000000] modified: 0000000000002000 - 0000000000006000 (reserved) [ 0.000000] modified: 0000000000006000 - 000000000009f400 (usable) [ 0.000000] modified: 000000000009f400 - 00000000000a0000 (reserved) [ 0.000000] modified: 00000000000d0000 - 00000000000d8000 (reserved) [ 0.000000] modified: 00000000000e4000 - 0000000000100000 (reserved) [ 0.000000] modified: 0000000000100000 - 000000003bdf0000 (usable) [ 0.000000] modified: 000000003bdf0000 - 000000003bdfb000 (ACPI data) [ 0.000000] modified: 000000003bdfb000 - 000000003be00000 (ACPI NVS) [ 0.000000] modified: 000000003be00000 - 000000003c000000 (reserved) [ 0.000000] modified: 00000000fff80000 - 0000000100000000 (reserved) [ 0.000000] initial memory mapped : 0 - 00c00000 [ 0.000000] init_memory_mapping: 0000000000000000-00000000377fe000 [ 0.000000] Using x86 segment limits to approximate NX protection [ 0.000000] 0000000000 - 0000400000 page 4k [ 0.000000] 0000400000 - 0037400000 page 2M [ 0.000000] 0037400000 - 00377fe000 page 4k [ 0.000000] kernel direct mapping tables up to 377fe000 @ 7000-c000 [ 0.000000] RAMDISK: 2c71b000 - 2ceb3e2b [ 0.000000] ACPI: RSDP 000f6ee0 00014 (v00 PTLTD ) [ 0.000000] ACPI: RSDT 3bdf6e96 00028 (v01 PTLTD RSDT 06040000 LTP 00000000) [ 0.000000] ACPI: FACP 3bdfaf8c 00074 (v01 SiS M650 06040000 PTL 000F4240) [ 0.000000] ACPI: DSDT 3bdf6ebe 040CE (v01 Clevo 650M 06040000 MSFT 0100000D) [ 0.000000] ACPI: FACS 3bdfbfc0 00040 [ 0.000000] 69MB HIGHMEM available. [ 0.000000] 887MB LOWMEM available. [ 0.000000] mapped low ram: 0 - 377fe000 [ 0.000000] low ram: 0 - 377fe000 [ 0.000000] node 0 low ram: 00000000 - 377fe000 [ 0.000000] node 0 bootmap 00008000 - 0000ef00 [ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 00377fe000] [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] [ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000] [ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000] [ 0.000000] #3 [0000100000 - 00008ddeb8] TEXT DATA BSS ==> [0000100000 - 00008ddeb8] [ 0.000000] #4 [002c71b000 - 002ceb3e2b] RAMDISK ==> [002c71b000 - 002ceb3e2b] [ 0.000000] #5 [000009f400 - 0000100000] BIOS reserved ==> [000009f400 - 0000100000] [ 0.000000] #6 [00008de000 - 00008e10f4] BRK ==> [00008de000 - 00008e10f4] [ 0.000000] #7 [0000007000 - 0000008000] PGTABLE ==> [0000007000 - 0000008000] [ 0.000000] #8 [0000008000 - 000000f000] BOOTMAP ==> [0000008000 - 000000f000] [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000000 -> 0x00001000 [ 0.000000] Normal 0x00001000 -> 0x000377fe [ 0.000000] HighMem 0x000377fe -> 0x0003bdf0 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[3] active PFN ranges [ 0.000000] 0: 0x00000000 -> 0x00000002 [ 0.000000] 0: 0x00000006 -> 0x0000009f [ 0.000000] 0: 0x00000100 -> 0x0003bdf0 [ 0.000000] On node 0 totalpages: 245131 [ 0.000000] free_area_init_node: node 0, pgdat c079a780, node_mem_map c1001000 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 3963 pages, LIFO batch:0 [ 0.000000] Normal zone: 1744 pages used for memmap [ 0.000000] Normal zone: 221486 pages, LIFO batch:31 [ 0.000000] HighMem zone: 140 pages used for memmap [ 0.000000] HighMem zone: 17766 pages, LIFO batch:3 [ 0.000000] Using APIC driver default [ 0.000000] ACPI: PM-Timer IO Port: 0x8008 [ 0.000000] SMP: Allowing 1 CPUs, 0 hotplug CPUs [ 0.000000] Local APIC disabled by BIOS -- you can enable it with "lapic" [ 0.000000] APIC: disable apic facility [ 0.000000] nr_irqs_gsi: 16 [ 0.000000] PM: Registered nosave memory: 0000000000002000 - 0000000000006000 [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000d0000 [ 0.000000] PM: Registered nosave memory: 00000000000d0000 - 00000000000d8000 [ 0.000000] PM: Registered nosave memory: 00000000000d8000 - 00000000000e4000 [ 0.000000] PM: Registered nosave memory: 00000000000e4000 - 0000000000100000 [ 0.000000] Allocating PCI resources starting at 3c000000 (gap: 3c000000:c3f80000) [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:1 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 14 pages/cpu @c1800000 s36056 r0 d21288 u4194304 [ 0.000000] pcpu-alloc: s36056 r0 d21288 u4194304 alloc=1*4194304 [ 0.000000] pcpu-alloc: [0] 0 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 243215 [ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-2.6.32-24-generic root=UUID=22e79f6f-0658-4565-bfa0-f6cd14025710 ro rootflags=data=writeback,acl quiet splash [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Enabling fast FPU save and restore... done. [ 0.000000] Enabling unmasked SIMD FPU exception support... done. [ 0.000000] Initializing CPU#0 [ 0.000000] allocated 4904640 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] Initializing HighMem for node 0 (000377fe:0003bdf0) [ 0.000000] Memory: 950856k/980928k available (4679k kernel code, 29224k reserved, 2124k data, 660k init, 71624k highmem) [ 0.000000] virtual kernel memory layout: [ 0.000000] fixmap : 0xfff1d000 - 0xfffff000 ( 904 kB) [ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB) [ 0.000000] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB) [ 0.000000] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB) [ 0.000000] .init : 0xc07a5000 - 0xc084a000 ( 660 kB) [ 0.000000] .data : 0xc0591e33 - 0xc07a4e88 (2124 kB) [ 0.000000] .text : 0xc0100000 - 0xc0591e33 (4679 kB) [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.000000] SLUB: Genslabs=13, HWalign=128, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] NR_IRQS:2304 nr_irqs:256 [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 2000.520 MHz processor. [ 0.008009] Calibrating delay loop (skipped), value calculated using timer frequency.. 4001.04 BogoMIPS (lpj=8002080) [ 0.008044] Security Framework initialized [ 0.008095] AppArmor: AppArmor initialized [ 0.008110] Mount-cache hash table entries: 512 [ 0.008369] Initializing cgroup subsys ns [ 0.008379] Initializing cgroup subsys cpuacct [ 0.008389] Initializing cgroup subsys memory [ 0.008408] Initializing cgroup subsys devices [ 0.008415] Initializing cgroup subsys freezer [ 0.008421] Initializing cgroup subsys net_cls [ 0.008465] CPU: Trace cache: 12K uops, L1 D cache: 8K [ 0.008473] CPU: L2 cache: 512K [ 0.008480] CPU: Hyper-Threading is disabled [ 0.008489] mce: CPU supports 4 MCE banks [ 0.008522] Performance Events: no PMU driver, software events only. [ 0.008537] Checking 'hlt' instruction... OK. [ 0.025473] SMP alternatives: switching to UP code [ 0.041509] Freeing SMP alternatives: 19k freed [ 0.041542] ACPI: Core revision 20090903 [ 0.052603] ACPI: setting ELCR to 0800 (from 0a20) [ 0.054429] ftrace: converting mcount calls to 0f 1f 44 00 00 [ 0.054441] ftrace: allocating 21780 entries in 43 pages [ 0.056124] Enabling APIC mode: Flat. Using 0 I/O APICs [ 0.056130] weird, boot CPU (#0) not listed by the BIOS. [ 0.056134] SMP motherboard not detected. [ 0.056138] Local APIC not detected. Using dummy APIC emulation. [ 0.056142] SMP disabled [ 0.056437] Brought up 1 CPUs [ 0.056441] Total of 1 processors activated (4001.04 BogoMIPS). [ 0.056844] CPU0 attaching NULL sched-domain. [ 0.057092] devtmpfs: initialized [ 0.057717] regulator: core version 0.5 [ 0.057751] Time: 17:15:06 Date: 09/09/10 [ 0.057832] NET: Registered protocol family 16 [ 0.058030] EISA bus registered [ 0.058047] ACPI: bus type pci registered [ 0.074664] PCI: PCI BIOS revision 2.10 entry at 0xfd9c8, last bus=1 [ 0.074668] PCI: Using configuration type 1 for base access [ 0.076312] bio: create slab at 0 [ 0.077096] ACPI: EC: Look up EC in DSDT [ 0.082381] ACPI: Interpreter enabled [ 0.082397] ACPI: (supports S0 S3 S4 S5) [ 0.082427] ACPI: Using PIC for interrupt routing [ 0.088365] ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62 [ 0.088569] ACPI: No dock devices found. [ 0.089734] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 0.089817] pci 0000:00:00.0: reg 10 32bit mmio: [0xe0000000-0xe7ffffff] [ 0.090016] pci 0000:00:02.0: Enabling SiS 96x SMBus [ 0.090083] pci 0000:00:02.1: reg 20 io port: [0x8100-0x811f] [ 0.090154] pci 0000:00:02.3: reg 10 32bit mmio: [0xe8000000-0xe8000fff] [ 0.090197] pci 0000:00:02.3: reg 30 32bit mmio pref: [0x000000-0x01ffff] [ 0.090225] pci 0000:00:02.3: supports D1 D2 [ 0.090229] pci 0000:00:02.3: PME# supported from D0 D1 D2 D3hot D3cold [ 0.090236] pci 0000:00:02.3: PME# disabled [ 0.090272] pci 0000:00:02.5: reg 10 io port: [0x1f0-0x1f7] [ 0.090283] pci 0000:00:02.5: reg 14 io port: [0x3f4-0x3f7] [ 0.090293] pci 0000:00:02.5: reg 18 io port: [0x170-0x177] [ 0.090303] pci 0000:00:02.5: reg 1c io port: [0x374-0x377] [ 0.090313] pci 0000:00:02.5: reg 20 io port: [0x1000-0x100f] [ 0.090384] pci 0000:00:02.7: reg 10 io port: [0x1400-0x14ff] [ 0.090395] pci 0000:00:02.7: reg 14 io port: [0x1080-0x10ff] [ 0.090454] pci 0000:00:02.7: supports D1 D2 [ 0.090458] pci 0000:00:02.7: PME# supported from D3hot D3cold [ 0.090465] pci 0000:00:02.7: PME# disabled [ 0.090513] pci 0000:00:03.0: reg 10 32bit mmio: [0xe8001000-0xe8001fff] [ 0.090576] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold [ 0.090583] pci 0000:00:03.0: PME# disabled [ 0.090630] pci 0000:00:03.1: reg 10 32bit mmio: [0xe8002000-0xe8002fff] [ 0.090693] pci 0000:00:03.1: PME# supported from D0 D3hot D3cold [ 0.090700] pci 0000:00:03.1: PME# disabled [ 0.090747] pci 0000:00:03.2: reg 10 32bit mmio: [0xe8003000-0xe8003fff] [ 0.090810] pci 0000:00:03.2: PME# supported from D0 D3hot D3cold [ 0.090817] pci 0000:00:03.2: PME# disabled [ 0.090864] pci 0000:00:03.3: reg 10 32bit mmio: [0xe8004000-0xe8004fff] [ 0.090927] pci 0000:00:03.3: PME# supported from D0 D3hot D3cold [ 0.090934] pci 0000:00:03.3: PME# disabled [ 0.091001] pci 0000:00:0a.0: reg 10 io port: [0x1800-0x18ff] [ 0.091012] pci 0000:00:0a.0: reg 14 32bit mmio: [0xe8005000-0xe80050ff] [ 0.091071] pci 0000:00:0a.0: supports D1 D2 [ 0.091074] pci 0000:00:0a.0: PME# supported from D1 D2 D3hot D3cold [ 0.091081] pci 0000:00:0a.0: PME# disabled [ 0.091133] pci 0000:00:0c.0: reg 10 32bit mmio: [0x000000-0x000fff] [ 0.091161] pci 0000:00:0c.0: supports D1 D2 [ 0.091164] pci 0000:00:0c.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.091171] pci 0000:00:0c.0: PME# disabled [ 0.091266] pci 0000:01:00.0: reg 10 32bit mmio pref: [0xf0000000-0xf7ffffff] [ 0.091276] pci 0000:01:00.0: reg 14 32bit mmio: [0xe8100000-0xe811ffff] [ 0.091285] pci 0000:01:00.0: reg 18 io port: [0x9000-0x907f] [ 0.091330] pci 0000:01:00.0: supports D1 D2 [ 0.091384] pci 0000:00:01.0: bridge io port: [0x9000-0x9fff] [ 0.091391] pci 0000:00:01.0: bridge 32bit mmio: [0xe8100000-0xe81fffff] [ 0.091399] pci 0000:00:01.0: bridge 32bit mmio pref: [0xf0000000-0xf7ffffff] [ 0.091436] pci_bus 0000:00: on NUMA node 0 [ 0.091443] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.103283] ACPI: PCI Interrupt Link [LNKA] (IRQs *11) [ 0.103440] ACPI: PCI Interrupt Link [LNKB] (IRQs *9) [ 0.103596] ACPI: PCI Interrupt Link [LNKC] (IRQs 5) *0, disabled. [ 0.103754] ACPI: PCI Interrupt Link [LNKD] (IRQs *11) [ 0.103948] ACPI: PCI Interrupt Link [LNKE] (IRQs *11) [ 0.104123] ACPI: PCI Interrupt Link [LNKF] (IRQs *9) [ 0.104276] ACPI: PCI Interrupt Link [LNKG] (IRQs *9) [ 0.104430] ACPI: PCI Interrupt Link [LNKH] (IRQs 9) *0, disabled. [ 0.104641] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none [ 0.104647] vgaarb: loaded [ 0.104871] SCSI subsystem initialized [ 0.104998] libata version 3.00 loaded. [ 0.105129] usbcore: registered new interface driver usbfs [ 0.105152] usbcore: registered new interface driver hub [ 0.105196] usbcore: registered new device driver usb [ 0.105430] ACPI: WMI: Mapper loaded [ 0.105434] PCI: Using ACPI for IRQ routing [ 0.105671] NetLabel: Initializing [ 0.105676] NetLabel: domain hash size = 128 [ 0.105678] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.105700] NetLabel: unlabeled traffic allowed by default [ 0.105773] Switching to clocksource tsc [ 0.108001] AppArmor: AppArmor Filesystem Enabled [ 0.108001] pnp: PnP ACPI init [ 0.108001] ACPI: bus type pnp registered [ 0.111903] pnp: PnP ACPI: found 10 devices [ 0.111907] ACPI: ACPI bus type pnp unregistered [ 0.111914] PnPBIOS: Disabled by ACPI PNP [ 0.111943] system 00:04: ioport range 0x8000-0x808f has been reserved [ 0.111950] system 00:04: ioport range 0x8090-0x80ff has been reserved [ 0.111955] system 00:04: ioport range 0x8100-0x811f has been reserved [ 0.111960] system 00:04: ioport range 0x4d0-0x4d1 has been reserved [ 0.111966] system 00:04: ioport range 0xfe00-0xfe00 has been reserved [ 0.111974] system 00:04: iomem range 0xfec00000-0xfecfffff has been reserved [ 0.111979] system 00:04: iomem range 0xfee00000-0xfeefffff has been reserved [ 0.111984] system 00:04: iomem range 0xffc00000-0xffc00fff has been reserved [ 0.111990] system 00:04: iomem range 0xffe00000-0xffe00fff has been reserved [ 0.111995] system 00:04: iomem range 0xffe80000-0xffefffff has been reserved [ 0.146855] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01 [ 0.146862] pci 0000:00:01.0: IO window: 0x9000-0x9fff [ 0.146871] pci 0000:00:01.0: MEM window: 0xe8100000-0xe81fffff [ 0.146879] pci 0000:00:01.0: PREFETCH window: 0xf0000000-0xf7ffffff [ 0.146889] pci 0000:00:0c.0: CardBus bridge, secondary bus 0000:02 [ 0.146894] pci 0000:00:0c.0: IO window: 0x001c00-0x001cff [ 0.146901] pci 0000:00:0c.0: IO window: 0x002000-0x0020ff [ 0.146908] pci 0000:00:0c.0: PREFETCH window: 0x3c000000-0x3fffffff [ 0.146916] pci 0000:00:0c.0: MEM window: 0x40000000-0x43ffffff [ 0.147001] pci 0000:00:0c.0: power state changed by ACPI to D0 [ 0.147046] pci 0000:00:0c.0: power state changed by ACPI to D0 [ 0.147056] pci 0000:00:0c.0: enabling device (0000 -> 0003) [ 0.147302] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 5 [ 0.147307] PCI: setting IRQ 5 as level-triggered [ 0.147314] pci 0000:00:0c.0: PCI INT A -> Link[LNKC] -> GSI 5 (level, low) -> IRQ 5 [ 0.147327] pci_bus 0000:00: resource 0 io: [0x00-0xffff] [ 0.147332] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff] [ 0.147338] pci_bus 0000:01: resource 0 io: [0x9000-0x9fff] [ 0.147342] pci_bus 0000:01: resource 1 mem: [0xe8100000-0xe81fffff] [ 0.147347] pci_bus 0000:01: resource 2 pref mem [0xf0000000-0xf7ffffff] [ 0.147352] pci_bus 0000:02: resource 0 io: [0x1c00-0x1cff] [ 0.147356] pci_bus 0000:02: resource 1 io: [0x2000-0x20ff] [ 0.147361] pci_bus 0000:02: resource 2 pref mem [0x3c000000-0x3fffffff] [ 0.147365] pci_bus 0000:02: resource 3 mem: [0x40000000-0x43ffffff] [ 0.147430] NET: Registered protocol family 2 [ 0.147598] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.148243] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.149602] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 0.150579] TCP: Hash tables configured (established 131072 bind 65536) [ 0.150588] TCP reno registered [ 0.150820] NET: Registered protocol family 1 [ 0.798060] pci 0000:01:00.0: Boot video device [ 0.798340] cpufreq-nforce2: No nForce2 chipset. [ 0.798386] Scanning for low memory corruption every 60 seconds [ 0.798596] audit: initializing netlink socket (disabled) [ 0.798618] type=2000 audit(1284052506.798:1): initialized [ 0.809651] Trying to unpack rootfs image as initramfs... [ 0.822655] highmem bounce pool size: 64 pages [ 0.822667] HugeTLB registered 4 MB page size, pre-allocated 0 pages [ 0.830368] VFS: Disk quotas dquot_6.5.2 [ 0.830530] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.831660] fuse init (API version 7.13) [ 0.831816] msgmni has been set to 1718 [ 0.832207] alg: No test for stdrng (krng) [ 0.832318] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 0.832325] io scheduler noop registered [ 0.832329] io scheduler anticipatory registered [ 0.832333] io scheduler deadline registered [ 0.832410] io scheduler cfq registered (default) [ 0.832590] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.832633] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 0.834862] ACPI: AC Adapter [ADP0] (on-line) [ 0.835008] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 [ 0.835019] ACPI: Power Button [PWRB] [ 0.835096] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1 [ 0.835104] ACPI: Sleep Button [SLPB] [ 0.835178] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input2 [ 0.835377] ACPI: Lid Switch [LID] [ 0.835457] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3 [ 0.835462] ACPI: Power Button [PWRF] [ 0.835743] processor LNXCPU:00: registered as cooling_device0 [ 0.847891] thermal LNXTHERM:01: registered as thermal_zone0 [ 0.847910] ACPI: Thermal Zone [THM0] (29 C) [ 0.854903] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.857088] brd: module loaded [ 0.857902] loop: module loaded [ 0.858373] isapnp: Scanning for PnP cards... [ 0.864340] input: Macintosh mouse button emulation as /devices/virtual/input/input4 [ 0.866121] pata_sis 0000:00:02.5: version 0.5.2 [ 0.870944] ACPI: Battery Slot [BAT0] (battery present) [ 0.871022] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11 [ 0.871028] PCI: setting IRQ 11 as level-triggered [ 0.871036] pata_sis 0000:00:02.5: PCI INT A -> Link[LNKA] -> GSI 11 (level, low) -> IRQ 11 [ 0.871744] scsi0 : pata_sis [ 0.871953] scsi1 : pata_sis [ 0.872958] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x1000 irq 14 [ 0.872964] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0x1008 irq 15 [ 0.873601] Fixed MDIO Bus: probed [ 0.873666] PPP generic driver version 2.4.2 [ 0.873791] tun: Universal TUN/TAP device driver, 1.6 [ 0.873795] tun: (C) 1999-2004 Max Krasnyansky [ 0.873962] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.873994] ehci_hcd 0000:00:03.3: enabling device (0000 -> 0002) [ 0.918388] ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 9 [ 0.918394] PCI: setting IRQ 9 as level-triggered [ 0.918401] ehci_hcd 0000:00:03.3: PCI INT D -> Link[LNKH] -> GSI 9 (level, low) -> IRQ 9 [ 0.918430] ehci_hcd 0000:00:03.3: EHCI Host Controller [ 0.918521] ehci_hcd 0000:00:03.3: new USB bus registered, assigned bus number 1 [ 0.918570] ehci_hcd 0000:00:03.3: cache line size of 128 is not supported [ 0.918587] ehci_hcd 0000:00:03.3: irq 9, io mem 0xe8004000 [ 0.930217] ehci_hcd 0000:00:03.3: USB 2.0 started, EHCI 1.00 [ 0.930472] usb usb1: configuration #1 chosen from 1 choice [ 0.930530] hub 1-0:1.0: USB hub found [ 0.930551] hub 1-0:1.0: 6 ports detected [ 0.930656] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.931051] ACPI: PCI Interrupt Link [LNKE] enabled at IRQ 11 [ 0.931059] ohci_hcd 0000:00:03.0: PCI INT A -> Link[LNKE] -> GSI 11 (level, low) -> IRQ 11 [ 0.931091] ohci_hcd 0000:00:03.0: OHCI Host Controller [ 0.931171] ohci_hcd 0000:00:03.0: new USB bus registered, assigned bus number 2 [ 0.931202] ohci_hcd 0000:00:03.0: irq 11, io mem 0xe8001000 [ 1.012314] usb usb2: configuration #1 chosen from 1 choice [ 1.012373] hub 2-0:1.0: USB hub found [ 1.012394] hub 2-0:1.0: 2 ports detected [ 1.012810] ACPI: PCI Interrupt Link [LNKF] enabled at IRQ 9 [ 1.012819] ohci_hcd 0000:00:03.1: PCI INT B -> Link[LNKF] -> GSI 9 (level, low) -> IRQ 9 [ 1.012849] ohci_hcd 0000:00:03.1: OHCI Host Controller [ 1.012933] ohci_hcd 0000:00:03.1: new USB bus registered, assigned bus number 3 [ 1.012963] ohci_hcd 0000:00:03.1: irq 9, io mem 0xe8002000 [ 1.038817] ata1.00: ATA-6: ST980815A, 3.ALD, max UDMA/100 [ 1.038825] ata1.00: 156301488 sectors, multi 16: LBA48 [ 1.100516] usb usb3: configuration #1 chosen from 1 choice [ 1.100576] hub 3-0:1.0: USB hub found [ 1.100599] hub 3-0:1.0: 2 ports detected [ 1.101011] ACPI: PCI Interrupt Link [LNKG] enabled at IRQ 9 [ 1.101019] ohci_hcd 0000:00:03.2: PCI INT C -> Link[LNKG] -> GSI 9 (level, low) -> IRQ 9 [ 1.101051] ohci_hcd 0000:00:03.2: OHCI Host Controller [ 1.101131] ohci_hcd 0000:00:03.2: new USB bus registered, assigned bus number 4 [ 1.101162] ohci_hcd 0000:00:03.2: irq 9, io mem 0xe8003000 [ 1.101225] ata1.00: configured for UDMA/100 [ 1.191842] usb usb4: configuration #1 chosen from 1 choice [ 1.191902] hub 4-0:1.0: USB hub found [ 1.191925] hub 4-0:1.0: 2 ports detected [ 1.192031] uhci_hcd: USB Universal Host Controller Interface driver [ 1.192194] PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 1.194167] i8042.c: Detected active multiplexing controller, rev 1.1. [ 1.199189] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.199205] serio: i8042 AUX0 port at 0x60,0x64 irq 12 [ 1.199280] serio: i8042 AUX1 port at 0x60,0x64 irq 12 [ 1.199323] serio: i8042 AUX2 port at 0x60,0x64 irq 12 [ 1.199369] serio: i8042 AUX3 port at 0x60,0x64 irq 12 [ 1.199628] mice: PS/2 mouse device common for all mice [ 1.202448] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0 [ 1.202509] rtc0: alarms up to one year, y3k, 114 bytes nvram [ 1.202758] device-mapper: uevent: version 1.0.3 [ 1.202987] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com [ 1.206572] device-mapper: multipath: version 1.1.0 loaded [ 1.206580] device-mapper: multipath round-robin: version 1.0.0 loaded [ 1.206885] EISA: Probing bus 0 at eisa.0 [ 1.206898] Cannot allocate resource for EISA slot 1 [ 1.206903] Cannot allocate resource for EISA slot 2 [ 1.206927] Cannot allocate resource for EISA slot 8 [ 1.206931] EISA: Detected 0 cards. [ 1.208144] cpuidle: using governor ladder [ 1.208149] cpuidle: using governor menu [ 1.209051] TCP cubic registered [ 1.209281] NET: Registered protocol family 10 [ 1.210105] lo: Disabled Privacy Extensions [ 1.210659] NET: Registered protocol family 17 [ 1.210781] Using IPI No-Shortcut mode [ 1.210962] PM: Resume from disk failed. [ 1.210983] registered taskstats version 1 [ 1.211320] Magic number: 10:217:289 [ 1.211374] tty tty22: hash matches [ 1.211455] rtc_cmos 00:02: setting system clock to 2010-09-09 17:15:08 UTC (1284052508) [ 1.211461] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 1.211464] EDD information not available. [ 1.222991] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input5 [ 1.549696] isapnp: No Plug & Play device found [ 1.549742] usb 3-1: new low speed USB device using ohci_hcd and address 2 [ 1.550004] scsi 0:0:0:0: Direct-Access ATA ST980815A 3.AL PQ: 0 ANSI: 5 [ 1.550323] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 1.550603] sd 0:0:0:0: [sda] 156301488 512-byte logical blocks: (80.0 GB/74.5 GiB) [ 1.550685] sd 0:0:0:0: [sda] Write Protect is off [ 1.550691] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.550733] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.550976] sda: sda1 sda2 sda3 sda4 < [ 1.559836] Freeing initrd memory: 7779k freed [ 1.572676] sda5 > [ 1.590269] sd 0:0:0:0: [sda] Attached SCSI disk [ 1.652302] ata2.00: ATAPI: SAMSUNG CDRW/DVD SN-324F, U205, max UDMA/33 [ 1.668321] ata2.00: configured for UDMA/33 [ 1.679410] scsi 1:0:0:0: CD-ROM SAMSUNG CDRW/DVD SN-324F U205 PQ: 0 ANSI: 5 [ 1.707102] sr0: scsi3-mmc drive: 2x/24x writer cd/rw xa/form2 cdda tray [ 1.707109] Uniform CD-ROM driver Revision: 3.20 [ 1.707295] sr 1:0:0:0: Attached scsi CD-ROM sr0 [ 1.707408] sr 1:0:0:0: Attached scsi generic sg1 type 5 [ 1.707496] Freeing unused kernel memory: 660k freed [ 1.708638] Write protecting the kernel text: 4680k [ 1.708693] Write protecting the kernel read-only data: 1844k [ 1.739275] usb 3-1: configuration #1 chosen from 1 choice [ 1.751521] udev: starting version 151 [ 2.185916] 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004) [ 2.185962] 8139cp 0000:00:0a.0: This (id 10ec:8139 rev 10) is not an 8139C+ compatible chip, use 8139too [ 2.195816] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 9 [ 2.195827] ohci1394 0000:00:02.3: PCI INT B -> Link[LNKB] -> GSI 9 (level, low) -> IRQ 9 [ 2.202888] usbcore: registered new interface driver hiddev [ 2.203429] usbcore: registered new interface driver usbhid [ 2.203609] usbhid: v2.6:USB HID core driver [ 2.204568] 8139too Fast Ethernet driver 0.9.28 [ 2.215978] input: A4Tech PS/2+USB Mouse as /devices/pci0000:00/0000:00:03.1/usb3/3-1/3-1:1.0/input/input6 [ 2.216478] a4tech 0003:09DA:000A.0001: input,hidraw0: USB HID v1.10 Mouse [A4Tech PS/2+USB Mouse] on usb-0000:00:03.1-1/input0 [ 2.254143] ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[9] MMIO=[e8000000-e80007ff] Max Packet=[2048] IR/IT contexts=[4/6] [ 2.263284] 8139too 0000:00:0a.0: enabling device (0000 -> 0003) [ 2.263608] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11 [ 2.263617] 8139too 0000:00:0a.0: PCI INT A -> Link[LNKD] -> GSI 11 (level, low) -> IRQ 11 [ 2.265322] eth0: RealTek RTL8139 at 0x1800, 00:90:f5:24:bb:78, IRQ 11 [ 2.427239] EXT4-fs (sda3): mounted filesystem with writeback data mode [ 3.532284] ieee1394: Host added: ID:BUS[0-00:1023] GUID[0090f5000078bb24] [ 5.192076] floppy0: no floppy controllers found [ 17.956390] Adding 15352k swap on /dev/sda2. Priority:-1 extents:1 across:15352k [ 18.013512] udev: starting version 151 [ 18.306380] lp: driver loaded but no devices found [ 18.375381] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 18.770013] sis96x_smbus 0000:00:02.1: SiS96x SMBus base address: 0x8100 [ 18.770024] ACPI: resource 0000:00:02.1 [0x8100-0x811f] conflicts with ACPI region SMB_ [0x8100-0x811f] [ 18.770029] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 18.785727] Linux agpgart interface v0.103 [ 18.863297] parport 0x378 (WARNING): CTR: wrote 0x0c, read 0xff [ 18.863306] parport 0x378 (WARNING): DATA: wrote 0xaa, read 0xff [ 18.863311] parport 0x378: You gave this address, but there is probably no parallel port there! [ 18.863333] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE] [ 18.906295] yenta_cardbus 0000:00:0c.0: CardBus bridge found [1558:0400] [ 18.906325] yenta_cardbus 0000:00:0c.0: Using CSCINT to route CSC interrupts to PCI [ 18.906330] yenta_cardbus 0000:00:0c.0: Routing CardBus interrupts to PCI [ 18.906338] yenta_cardbus 0000:00:0c.0: TI: mfunc 0x01001002, devctl 0x44 [ 18.920087] vga16fb: initializing [ 18.920098] vga16fb: mapped to 0xc00a0000 [ 18.920365] fb0: VGA16 VGA frame buffer device [ 18.959187] lp0: using parport0 (interrupt-driven). [ 18.972192] ppdev: user-space parallel port driver [ 19.129566] type=1505 audit(1284052526.416:2): operation="profile_load" pid=498 name="/sbin/dhclient3" [ 19.130343] type=1505 audit(1284052526.416:3): operation="profile_load" pid=498 name="/usr/lib/NetworkManager/nm-dhcp-client.action" [ 19.130760] type=1505 audit(1284052526.416:4): operation="profile_load" pid=498 name="/usr/lib/connman/scripts/dhclient-script" [ 19.136426] yenta_cardbus 0000:00:0c.0: ISA IRQ mask 0x0418, PCI irq 5 [ 19.136432] yenta_cardbus 0000:00:0c.0: Socket status: 30000006 [ 19.144290] agpgart-sis 0000:00:00.0: SiS chipset [1039/0650] [ 19.202229] agpgart-sis 0000:00:00.0: AGP aperture is 128M @ 0xe0000000 [ 19.258644] input: PS/2 Mouse as /devices/platform/i8042/serio4/input/input7 [ 19.274683] input: AlpsPS/2 ALPS GlidePoint as /devices/platform/i8042/serio4/input/input8 [ 19.584584] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x100-0x3af: clean. [ 19.586510] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x3e0-0x4ff: excluding 0x480-0x48f [ 19.587314] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x820-0x8ff: clean. [ 19.588087] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xc00-0xcf7: clean. [ 19.589037] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xa00-0xaff: clean. [ 19.603450] Console: switching to colour frame buffer device 80x30 [ 19.628476] kjournald starting. Commit interval 5 seconds [ 19.628710] EXT3 FS on sda1, internal journal [ 19.628720] EXT3-fs: mounted filesystem with ordered data mode. [ 19.761406] Intel ICH 0000:00:02.7: enabling device (0000 -> 0001) [ 19.761424] Intel ICH 0000:00:02.7: PCI INT C -> Link[LNKC] -> GSI 5 (level, low) -> IRQ 5 [ 19.814142] EXT4-fs (sda5): mounted filesystem with writeback data mode [ 20.588045] intel8x0_measure_ac97_clock: measured 55366 usecs (2664 samples) [ 20.588052] intel8x0: clocking to 48000 [ 21.852098] floppy0: no floppy controllers found [ 21.887138] type=1505 audit(1284052529.172:5): operation="profile_load" pid=662 name="/usr/share/gdm/guest-session/Xsession" [ 21.898525] type=1505 audit(1284052529.184:6): operation="profile_replace" pid=663 name="/sbin/dhclient3" [ 21.899339] type=1505 audit(1284052529.184:7): operation="profile_replace" pid=663 name="/usr/lib/NetworkManager/nm-dhcp-client.action" [ 21.899776] type=1505 audit(1284052529.184:8): operation="profile_replace" pid=663 name="/usr/lib/connman/scripts/dhclient-script" [ 21.988132] type=1505 audit(1284052529.276:9): operation="profile_load" pid=670 name="/usr/bin/evince" [ 22.015742] eth0: link up, 100Mbps, full-duplex, lpa 0x45E1 [ 22.045964] type=1505 audit(1284052529.332:10): operation="profile_load" pid=670 name="/usr/bin/evince-previewer" [ 22.101989] type=1505 audit(1284052529.388:11): operation="profile_load" pid=670 name="/usr/bin/evince-thumbnailer" [ 22.547497] apm: BIOS not found. [ 32.612027] eth0: no IPv6 routers present [ 168.791173] tun0: Disabled Privacy Extensions [ 174.799514] lo: Disabled Privacy Extensions [ 495.094705] process `skype' is using obsolete setsockopt SO_BSDCOMPAT [ 1055.492355] PM: Syncing filesystems ... done. [ 1055.524034] PM: Preparing system for mem sleep [ 1055.524043] Freezing user space processes ... (elapsed 0.00 seconds) done. [ 1055.526558] Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done. [ 1055.526756] PM: Entering mem sleep [ 1055.526779] Suspending console(s) (use no_console_suspend to debug) [ 1055.540066] sd 0:0:0:0: [sda] Synchronizing SCSI cache [ 1055.565517] sd 0:0:0:0: [sda] Stopping disk [ 1057.846845] PM: suspend of drv:sd dev:0:0:0:0 complete after 2306.780 msecs [ 1058.255495] PM: suspend of drv:psmouse dev:serio4 complete after 408.608 msecs [ 1058.468028] PM: suspend of drv:atkbd dev:serio0 complete after 212.524 msecs [ 1058.469090] ACPI handle has no context! [ 1058.469182] ehci_hcd 0000:00:03.3: PCI INT D disabled [ 1058.469193] ohci_hcd 0000:00:03.2: PCI INT C disabled [ 1058.469202] ohci_hcd 0000:00:03.1: PCI INT B disabled [ 1058.469213] ohci_hcd 0000:00:03.0: PCI INT A disabled [ 1058.469412] Intel ICH 0000:00:02.7: PCI INT C disabled [ 1058.469566] pata_sis 0000:00:02.5: PCI INT A disabled [ 1058.473632] ACPI handle has no context! [ 1058.488136] PM: suspend of devices complete after 2961.106 msecs [ 1058.488141] PM: suspend devices took 2.964 seconds [ 1058.552126] PM: late suspend of devices complete after 63.978 msecs [ 1058.552266] ACPI: Preparing to enter system sleep state S3 [ 1058.552997] Disabling non-boot CPUs ... [ 1058.553029] Back to C! [ 1058.553029] ACPI: Waking up from system sleep state S3 [ 1058.564221] pci 0000:00:01.0: restoring config space at offset 0x7 (was 0x9090, writing 0x20009090) [ 1058.564269] pci 0000:00:02.0: restoring config space at offset 0x0 (was 0x81039, writing 0x9621039) [ 1058.564279] pci 0000:00:02.0: Enabling SiS 96x SMBus [ 1058.564362] pata_sis 0000:00:02.5: restoring config space at offset 0xf (was 0x1ff, writing 0x0) [ 1058.564380] pata_sis 0000:00:02.5: restoring config space at offset 0x7 (was 0x375, writing 0x0) [ 1058.564388] pata_sis 0000:00:02.5: restoring config space at offset 0x6 (was 0x171, writing 0x0) [ 1058.564395] pata_sis 0000:00:02.5: restoring config space at offset 0x5 (was 0x3f5, writing 0x0) [ 1058.564403] pata_sis 0000:00:02.5: restoring config space at offset 0x4 (was 0x1f1, writing 0x0) [ 1058.564412] pata_sis 0000:00:02.5: restoring config space at offset 0x2 (was 0x1018a00, writing 0x1018000) [ 1058.564456] Intel ICH 0000:00:02.7: restoring config space at offset 0x1 (was 0x2900000, writing 0x2900001) [ 1058.580067] ohci_hcd 0000:00:03.0: restoring config space at offset 0x1 (was 0x2900017, writing 0x2900013) [ 1058.596065] ohci_hcd 0000:00:03.1: restoring config space at offset 0x1 (was 0x2900017, writing 0x2900013) [ 1058.612065] ohci_hcd 0000:00:03.2: restoring config space at offset 0x1 (was 0x2900017, writing 0x2900013) [ 1058.628065] ehci_hcd 0000:00:03.3: restoring config space at offset 0x1 (was 0x2900000, writing 0x2900002) [ 1058.628368] PM: early resume of devices complete after 64.221 msecs [ 1058.742049] ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[9] MMIO=[e8000000-e80007ff] Max Packet=[2048] IR/IT contexts=[4/6] [ 1058.748178] pata_sis 0000:00:02.5: PCI INT A -> Link[LNKA] -> GSI 11 (level, low) -> IRQ 11 [ 1058.750399] Intel ICH 0000:00:02.7: PCI INT C -> Link[LNKC] -> GSI 5 (level, low) -> IRQ 5 [ 1058.928288] ata2.00: ACPI cmd ef/03:0c:00:00:00:a0 (SET FEATURES) filtered out [ 1058.928295] ata2.00: ACPI cmd ef/03:42:00:00:00:a0 (SET FEATURES) filtered out [ 1058.960316] ata2.00: configured for UDMA/33 [ 1059.761609] PM: resume of drv:Intel ICH dev:0000:00:02.7 complete after 1011.215 msecs [ 1059.761624] ohci_hcd 0000:00:03.0: PCI INT A -> Link[LNKE] -> GSI 11 (level, low) -> IRQ 11 [ 1059.784035] ohci_hcd 0000:00:03.1: PCI INT B -> Link[LNKF] -> GSI 9 (level, low) -> IRQ 9 [ 1059.808035] ohci_hcd 0000:00:03.2: PCI INT C -> Link[LNKG] -> GSI 9 (level, low) -> IRQ 9 [ 1059.832034] ehci_hcd 0000:00:03.3: PCI INT D -> Link[LNKH] -> GSI 9 (level, low) -> IRQ 9 [ 1059.972027] PM: resume of drv:yenta_cardbus dev:0000:00:0c.0 complete after 139.975 msecs [ 1059.976252] ata1.00: ACPI cmd ef/03:0c:00:00:00:a0 (SET FEATURES) filtered out [ 1059.976259] ata1.00: ACPI cmd ef/03:45:00:00:00:a0 (SET FEATURES) filtered out [ 1059.992396] ata1.00: configured for UDMA/100 [ 1060.220036] PM: resume of drv:usb dev:usb3 complete after 195.968 msecs [ 1060.222080] sd 0:0:0:0: [sda] Starting disk [ 1060.556036] usb 3-1: reset low speed USB device using ohci_hcd and address 2 [ 1060.914731] PM: resume of drv:usb dev:3-1 complete after 679.039 msecs [ 1060.914793] PM: resume of devices complete after 2286.404 msecs [ 1060.914991] PM: resume devices took 2.284 seconds [ 1060.915020] PM: Finishing wakeup. [ 1060.915023] Restarting tasks ... done. [ 1064.625061] eth0: link up, 100Mbps, full-duplex, lpa 0x45E1 [ 1075.496035] eth0: no IPv6 routers present [ 1673.388049] usb 4-1: new full speed USB device using ohci_hcd and address 2 [ 1673.629808] usb 4-1: configuration #1 chosen from 1 choice [ 1673.691366] Bluetooth: Core ver 2.15 [ 1673.692594] NET: Registered protocol family 31 [ 1673.692601] Bluetooth: HCI device and connection manager initialized [ 1673.692608] Bluetooth: HCI socket layer initialized [ 1673.734133] Bluetooth: Generic Bluetooth USB driver ver 0.6 [ 1673.748288] usbcore: registered new interface driver btusb [ 1673.869602] Bluetooth: L2CAP ver 2.14 [ 1673.869610] Bluetooth: L2CAP socket layer initialized [ 1673.945075] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 1673.945083] Bluetooth: BNEP filters: protocol multicast [ 1673.978787] Bridge firewalling registered [ 1674.009134] Bluetooth: SCO (Voice Link) ver 0.6 [ 1674.009142] Bluetooth: SCO socket layer initialized [ 1674.254105] Bluetooth: RFCOMM TTY layer initialized [ 1674.254118] Bluetooth: RFCOMM socket layer initialized [ 1674.254122] Bluetooth: RFCOMM ver 1.11 [ 1681.228609] usb 4-1: USB disconnect, address 2 [ 1681.228778] btusb_bulk_complete: hci0 urb e1b9b200 failed to resubmit (19) [ 1681.228790] btusb_intr_complete: hci0 urb e1b9b280 failed to resubmit (19) [ 1681.229771] btusb_bulk_complete: hci0 urb e1b9b180 failed to resubmit (19) [ 1681.230283] btusb_send_frame: hci0 urb e1b6d000 submission failed [ 1704.408038] usb 1-3: new high speed USB device using ehci_hcd and address 4 [ 1704.712283] usb 1-3: configuration #1 chosen from 1 choice [ 1704.783136] cfg80211: Calling CRDA to update world regulatory domain [ 1704.835808] cfg80211: World regulatory domain updated: [ 1704.835818] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 1704.835823] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 1704.835829] (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 1704.835834] (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 1704.835839] (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 1704.835844] (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 1705.152737] phy0: Selected rate control algorithm 'minstrel' [ 1705.154127] Registered led device: rt2500usb-phy0::radio [ 1705.154166] Registered led device: rt2500usb-phy0::quality [ 1705.155163] usbcore: registered new interface driver rt2500usb [ 1705.184486] usbcore: registered new interface driver rt73usb [ 1705.214968] usbcore: registered new interface driver p54usb [ 1705.432183] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 1712.972457] wlan0: deauthenticating from 00:14:bf:43:0a:7c by local choice (reason=3) [ 1712.980271] wlan0: direct probe to AP 00:14:bf:43:0a:7c (try 1) [ 1712.982329] wlan0: direct probe responded [ 1712.982340] wlan0: authenticate with AP 00:14:bf:43:0a:7c (try 1) [ 1712.984229] wlan0: authenticated [ 1712.984466] wlan0: associate with AP 00:14:bf:43:0a:7c (try 1) [ 1712.986704] wlan0: RX AssocResp from 00:14:bf:43:0a:7c (capab=0x431 status=0 aid=1) [ 1712.986712] wlan0: associated [ 1712.995514] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 1714.183041] padlock: VIA PadLock not detected. [ 1723.088056] wlan0: no IPv6 routers present [ 1759.626123] wlan0: deauthenticating from 00:14:bf:43:0a:7c by local choice (reason=3)