Oct 29 20:07:48 woollyrat kernel: [120423.526835] usb 2-3.1: new high speed USB device using ehci_hcd and address 18
Oct 29 20:07:48 woollyrat kernel: [120423.642540] usb 2-3.1: configuration #1 chosen from 1 choice
Oct 29 20:07:48 woollyrat kernel: [120423.643839] scsi15 : SCSI emulation for USB Mass Storage devices
Oct 29 20:07:48 woollyrat kernel: [120423.668528] usb-storage: device found at 18
Oct 29 20:07:48 woollyrat kernel: [120423.668530] usb-storage: waiting for device to settle before scanning
Oct 29 20:07:53 woollyrat kernel: [120428.684060] usb-storage: device scan complete
Oct 29 20:07:57 woollyrat kernel: [120432.540804] scsi 15:0:0:0: Direct-Access     Maxtor   3200             0344 PQ: 0 ANSI: 4
Oct 29 20:07:57 woollyrat kernel: [120432.567086] sd 15:0:0:0: [sdb] 976773168 512-byte hardware sectors: (500 GB/465 GiB)
Oct 29 20:07:57 woollyrat kernel: [120432.569992] sd 15:0:0:0: [sdb] Write Protect is off
Oct 29 20:07:57 woollyrat kernel: [120432.570000] sd 15:0:0:0: [sdb] Mode Sense: 17 00 00 00
Oct 29 20:07:57 woollyrat kernel: [120432.570005] sd 15:0:0:0: [sdb] Assuming drive cache: write through
Oct 29 20:07:57 woollyrat kernel: [120432.571000] sd 15:0:0:0: [sdb] 976773168 512-byte hardware sectors: (500 GB/465 GiB)
Oct 29 20:07:57 woollyrat kernel: [120432.571971] sd 15:0:0:0: [sdb] Write Protect is off
Oct 29 20:07:57 woollyrat kernel: [120432.571977] sd 15:0:0:0: [sdb] Mode Sense: 17 00 00 00
Oct 29 20:07:57 woollyrat kernel: [120432.571981] sd 15:0:0:0: [sdb] Assuming drive cache: write through
Oct 29 20:07:57 woollyrat kernel: [120432.571989]  sdb: sdb1
Oct 29 20:07:57 woollyrat kernel: [120432.600855] sd 15:0:0:0: [sdb] Attached SCSI disk
Oct 29 20:07:57 woollyrat kernel: [120432.601018] sd 15:0:0:0: Attached scsi generic sg2 type 0
Oct 29 20:07:57 woollyrat kernel: [120433.083536] kjournald starting.  Commit interval 5 seconds
Oct 29 20:07:57 woollyrat kernel: [120433.084215] EXT3 FS on sdb1, internal journal
Oct 29 20:07:57 woollyrat kernel: [120433.084217] EXT3-fs: recovery complete.
Oct 29 20:07:57 woollyrat kernel: [120433.084840] EXT3-fs: mounted filesystem with ordered data mode.
Oct 29 22:53:36 woollyrat kernel: [130370.966195] usb 2-3.1: USB disconnect, address 18
Oct 29 22:53:36 woollyrat kernel: [130370.968308] journal_bmap: journal block not found at offset 341 on sdb1
Oct 29 22:53:36 woollyrat kernel: [130370.968316] Aborting journal on device sdb1.
Oct 29 22:53:36 woollyrat kernel: [130370.968336] Buffer I/O error on device sdb1, logical block 1575
Oct 29 22:53:36 woollyrat kernel: [130370.968340] lost page write due to I/O error on sdb1
Oct 29 22:53:36 woollyrat kernel: [130370.968392] journal commit I/O error
Oct 29 22:53:36 woollyrat kernel: [130371.390269] ext3_abort called.
Oct 29 22:53:36 woollyrat kernel: [130371.390280] EXT3-fs error (device sdb1): ext3_put_super: Couldn't clean up the journal
Oct 29 22:53:36 woollyrat kernel: [130371.390287] Remounting filesystem read-only
Oct 29 23:01:18 woollyrat kernel: [130833.335576] npviewer.bin[22953]: segfault at 8 ip 00000000f67dc871 sp 00000000fffe3760 error 4 in libflashplayer.so[f679f000+990000]
Oct 29 23:05:59 woollyrat kernel: [131114.420002] midori[22857]: segfault at 30 ip 00007fb21b7c8cac sp 00007fff7d372820 error 4 in libgtk-x11-2.0.so.0.1600.1[7fb21b651000+3ef000]
Oct 30 02:29:11 woollyrat NetworkManager: <info>  HAL disappeared 
Oct 30 02:29:15 woollyrat NetworkManager: <info>  HAL re-appeared 
Oct 30 02:29:15 woollyrat NetworkManager: <info>  Found radio killswitch /org/freedesktop/Hal/devices/dell_wlan_switch 
Oct 30 02:29:36 woollyrat NetworkManager: <info>  HAL disappeared 
Oct 30 02:30:22 woollyrat kernel: Kernel logging (proc) stopped.
Oct 30 02:30:22 woollyrat kernel: Kernel log daemon terminating.
Oct 30 02:54:02 woollyrat kernel: imklog 4.2.0, log source = /var/run/rsyslog/kmsg started.
Oct 30 02:54:02 woollyrat kernel: [143406.823025] type=1503 audit(1256869851.628:10): operation="sysctl" requested_mask="r::" denied_mask="r::" fsuid=0 name="/proc/sys/crypto/fips_enabled" pid=25095 profile="/usr/sbin/cupsd"
Oct 30 02:54:03 woollyrat kernel: [144798.621007] type=1505 audit(1256871243.425:11): operation="profile_replace" name="/sbin/dhclient3" name2="default" pid=999
Oct 30 02:54:03 woollyrat kernel: [144798.621048] type=1505 audit(1256871243.429:12): operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" name2="default" pid=999
Oct 30 02:54:03 woollyrat kernel: [144798.621081] type=1505 audit(1256871243.429:13): operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" name2="default" pid=999
Oct 30 02:55:26 woollyrat kernel: [144881.823345] type=1505 audit(1256871326.629:14): operation="profile_replace" name="/usr/sbin/tcpdump" name2="default" pid=3135
Oct 30 08:03:23 woollyrat kernel: [163358.712307] type=1505 audit(1256889803.520:15): operation="profile_replace" name="/usr/lib/cups/backend/cups-pdf" name2="default" pid=24865
Oct 30 08:03:23 woollyrat kernel: [163358.712395] type=1505 audit(1256889803.520:16): operation="profile_replace" name="/usr/sbin/cupsd" name2="default" pid=24865
Oct 30 08:03:52 woollyrat NetworkManager: <info>  HAL re-appeared
Oct 30 08:03:55 woollyrat NetworkManager: <info>  HAL disappeared
Oct 30 08:03:55 woollyrat NetworkManager: <info>  HAL re-appeared
Oct 30 08:05:28 woollyrat kernel: [163483.337891] type=1505 audit(1256889928.145:17): operation="profile_replace" name="/usr/share/gdm/guest-session/Xsession" name2="default" pid=27038
Oct 30 08:05:28 woollyrat kernel: [163483.509800] type=1505 audit(1256889928.317:18): operation="profile_replace" name="/sbin/dhclient3" name2="default" pid=27039
Oct 30 08:05:28 woollyrat kernel: [163483.509942] type=1505 audit(1256889928.317:19): operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" name2="default" pid=27039
Oct 30 08:05:28 woollyrat kernel: [163483.510010] type=1505 audit(1256889928.317:20): operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" name2="default" pid=27039
Oct 30 08:05:34 woollyrat kernel: [163490.100291] type=1505 audit(1256889934.905:21): operation="profile_load" name="/usr/bin/evince" name2="default" pid=27041
Oct 30 08:05:34 woollyrat kernel: [163490.101322] type=1505 audit(1256889934.909:22): operation="profile_load" name="/usr/bin/evince-previewer" name2="default" pid=27041
Oct 30 08:05:34 woollyrat kernel: [163490.102003] type=1505 audit(1256889934.909:23): operation="profile_load" name="/usr/bin/evince-thumbnailer" name2="default" pid=27041
Oct 30 08:05:35 woollyrat kernel: [163490.260653] type=1505 audit(1256889935.068:24): operation="profile_replace" name="/usr/lib/cups/backend/cups-pdf" name2="default" pid=27042
Oct 30 08:05:35 woollyrat kernel: [163490.260832] type=1505 audit(1256889935.068:25): operation="profile_replace" name="/usr/sbin/cupsd" name2="default" pid=27042
Oct 30 08:05:35 woollyrat kernel: [163490.309046] type=1505 audit(1256889935.116:26): operation="profile_replace" name="/usr/sbin/tcpdump" name2="default" pid=27043
Oct 30 08:05:35 woollyrat kernel: [163490.378408] type=1505 audit(1256889935.184:27): operation="profile_replace" name="/usr/share/gdm/guest-session/Xsession" name2="default" pid=27073
Oct 30 08:05:35 woollyrat kernel: [163490.463699] type=1505 audit(1256889935.268:28): operation="profile_replace" name="/sbin/dhclient3" name2="default" pid=27074
Oct 30 08:05:35 woollyrat kernel: [163490.463821] type=1505 audit(1256889935.268:29): operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" name2="default" pid=27074
Oct 30 08:05:35 woollyrat kernel: [163490.463885] type=1505 audit(1256889935.268:30): operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" name2="default" pid=27074
Oct 30 08:05:41 woollyrat kernel: [163497.174993] type=1505 audit(1256889941.980:31): operation="profile_replace" name="/usr/bin/evince" name2="default" pid=27075
Oct 30 08:05:41 woollyrat kernel: [163497.176281] type=1505 audit(1256889941.984:32): operation="profile_replace" name="/usr/bin/evince-previewer" name2="default" pid=27075
Oct 30 08:05:41 woollyrat kernel: [163497.176947] type=1505 audit(1256889941.984:33): operation="profile_replace" name="/usr/bin/evince-thumbnailer" name2="default" pid=27075
Oct 30 08:05:42 woollyrat kernel: [163497.341740] type=1505 audit(1256889942.148:34): operation="profile_replace" name="/usr/lib/cups/backend/cups-pdf" name2="default" pid=27076
Oct 30 08:05:42 woollyrat kernel: [163497.341993] type=1505 audit(1256889942.148:35): operation="profile_replace" name="/usr/sbin/cupsd" name2="default" pid=27076
Oct 30 08:05:42 woollyrat kernel: [163497.395897] type=1505 audit(1256889942.200:36): operation="profile_replace" name="/usr/sbin/tcpdump" name2="default" pid=27077
Oct 30 08:05:42 woollyrat kernel: [163497.436999] type=1505 audit(1256889942.244:37): operation="profile_remove" name="/sbin/dhclient-script" name2="default" pid=27095
Oct 30 08:13:51 woollyrat kernel: Kernel logging (proc) stopped.
Oct 30 08:14:45 woollyrat kernel: imklog 4.2.0, log source = /var/run/rsyslog/kmsg started.
Oct 30 08:14:45 woollyrat kernel: [    0.000000] Initializing cgroup subsys cpuset
Oct 30 08:14:45 woollyrat kernel: [    0.000000] Initializing cgroup subsys cpu
Oct 30 08:14:45 woollyrat kernel: [    0.000000] Linux version 2.6.31-14-generic (buildd@crested) (gcc version 4.4.1 (Ubuntu 4.4.1-4ubuntu8) ) #48-Ubuntu SMP Fri Oct 16 14:05:01 UTC 2009 (Ubuntu 2.6.31-14.48-generic)
Oct 30 08:14:45 woollyrat kernel: [    0.000000] Command line: root=UUID=cb599bee-3a51-46a7-b43c-03d910117f33 ro quiet splash 
Oct 30 08:14:45 woollyrat kernel: [    0.000000] KERNEL supported cpus:
Oct 30 08:14:45 woollyrat kernel: [    0.000000]   Intel GenuineIntel
Oct 30 08:14:45 woollyrat kernel: [    0.000000]   AMD AuthenticAMD
Oct 30 08:14:45 woollyrat kernel: [    0.000000]   Centaur CentaurHauls
Oct 30 08:14:45 woollyrat kernel: [    0.000000] BIOS-provided physical RAM map:
Oct 30 08:14:45 woollyrat kernel: [    0.000000]  BIOS-e820: 0000000000000000 - 000000000009c400 (usable)
Oct 30 08:14:45 woollyrat kernel: [    0.000000]  BIOS-e820: 000000000009c400 - 00000000000a0000 (reserved)
Oct 30 08:14:45 woollyrat kernel: [    0.000000]  BIOS-e820: 00000000000d2000 - 00000000000d4000 (reserved)
Oct 30 08:14:45 woollyrat kernel: [    0.000000]  BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
Oct 30 08:14:45 woollyrat kernel: [    0.000000]  BIOS-e820: 0000000000100000 - 00000000bf8a1000 (usable)
Oct 30 08:14:45 woollyrat kernel: [    0.000000]  BIOS-e820: 00000000bf8a1000 - 00000000bf8a7000 (reserved)
Oct 30 08:14:45 woollyrat kernel: [    0.000000]  BIOS-e820: 00000000bf8a7000 - 00000000bf9c2000 (usable)
Oct 30 08:14:45 woollyrat kernel: [    0.000000]  BIOS-e820: 00000000bf9c2000 - 00000000bfa0f000 (reserved)
Oct 30 08:14:45 woollyrat kernel: [    0.000000]  BIOS-e820: 00000000bfa0f000 - 00000000bfb09000 (usable)
Oct 30 08:14:45 woollyrat kernel: [    0.000000]  BIOS-e820: 00000000bfb09000 - 00000000bfd0f000 (reserved)
Oct 30 08:14:45 woollyrat kernel: [    0.000000]  BIOS-e820: 00000000bfd0f000 - 00000000bfd18000 (usable)
Oct 30 08:14:45 woollyrat kernel: [    0.000000]  BIOS-e820: 00000000bfd18000 - 00000000bfd1f000 (reserved)
Oct 30 08:14:45 woollyrat kernel: [    0.000000]  BIOS-e820: 00000000bfd1f000 - 00000000bfd63000 (usable)
Oct 30 08:14:45 woollyrat kernel: [    0.000000]  BIOS-e820: 00000000bfd63000 - 00000000bfd9f000 (ACPI NVS)
Oct 30 08:14:45 woollyrat kernel: [    0.000000]  BIOS-e820: 00000000bfd9f000 - 00000000bfde4000 (usable)
Oct 30 08:14:45 woollyrat kernel: [    0.000000]  BIOS-e820: 00000000bfde4000 - 00000000bfdff000 (ACPI data)
Oct 30 08:14:45 woollyrat kernel: [    0.000000]  BIOS-e820: 00000000bfdff000 - 00000000bfe00000 (usable)
Oct 30 08:14:45 woollyrat kernel: [    0.000000]  BIOS-e820: 00000000bfe00000 - 00000000c0000000 (reserved)
Oct 30 08:14:45 woollyrat kernel: [    0.000000]  BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
Oct 30 08:14:45 woollyrat kernel: [    0.000000]  BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
Oct 30 08:14:45 woollyrat kernel: [    0.000000]  BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved)
Oct 30 08:14:45 woollyrat kernel: [    0.000000]  BIOS-e820: 00000000fed10000 - 00000000fed14000 (reserved)
Oct 30 08:14:45 woollyrat kernel: [    0.000000]  BIOS-e820: 00000000fed18000 - 00000000fed1a000 (reserved)
Oct 30 08:14:45 woollyrat kernel: [    0.000000]  BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved)
Oct 30 08:14:45 woollyrat kernel: [    0.000000]  BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
Oct 30 08:14:45 woollyrat kernel: [    0.000000]  BIOS-e820: 00000000ff800000 - 0000000100000000 (reserved)
Oct 30 08:14:45 woollyrat kernel: [    0.000000] DMI present.
Oct 30 08:14:45 woollyrat kernel: [    0.000000] last_pfn = 0xbfe00 max_arch_pfn = 0x400000000
Oct 30 08:14:45 woollyrat kernel: [    0.000000] MTRR default type: uncachable
Oct 30 08:14:45 woollyrat kernel: [    0.000000] MTRR fixed ranges enabled:
Oct 30 08:14:45 woollyrat kernel: [    0.000000]   00000-9FFFF write-back
Oct 30 08:14:45 woollyrat kernel: [    0.000000]   A0000-BFFFF uncachable
Oct 30 08:14:45 woollyrat kernel: [    0.000000]   C0000-FFFFF write-protect
Oct 30 08:14:45 woollyrat kernel: [    0.000000] MTRR variable ranges enabled:
Oct 30 08:14:45 woollyrat kernel: [    0.000000]   0 base 000000000 mask F80000000 write-back
Oct 30 08:14:45 woollyrat kernel: [    0.000000]   1 base 080000000 mask FC0000000 write-back
Oct 30 08:14:45 woollyrat kernel: [    0.000000]   2 base 0FFE00000 mask FFFE00000 write-protect
Oct 30 08:14:45 woollyrat kernel: [    0.000000]   3 disabled
Oct 30 08:14:45 woollyrat kernel: [    0.000000]   4 disabled
Oct 30 08:14:45 woollyrat kernel: [    0.000000]   5 disabled
Oct 30 08:14:45 woollyrat kernel: [    0.000000]   6 disabled
Oct 30 08:14:45 woollyrat kernel: [    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
Oct 30 08:14:45 woollyrat kernel: [    0.000000] e820 update range: 0000000000001000 - 0000000000006000 (usable) ==> (reserved)
Oct 30 08:14:45 woollyrat kernel: [    0.000000] Scanning 1 areas for low memory corruption
Oct 30 08:14:45 woollyrat kernel: [    0.000000] modified physical RAM map:
Oct 30 08:14:45 woollyrat kernel: [    0.000000]  modified: 0000000000000000 - 0000000000001000 (usable)
Oct 30 08:14:45 woollyrat kernel: [    0.000000]  modified: 0000000000001000 - 0000000000006000 (reserved)
Oct 30 08:14:45 woollyrat kernel: [    0.000000]  modified: 0000000000006000 - 000000000009c400 (usable)
Oct 30 08:14:45 woollyrat kernel: [    0.000000]  modified: 000000000009c400 - 00000000000a0000 (reserved)
Oct 30 08:14:45 woollyrat kernel: [    0.000000]  modified: 00000000000d2000 - 00000000000d4000 (reserved)
Oct 30 08:14:45 woollyrat kernel: [    0.000000]  modified: 00000000000e0000 - 0000000000100000 (reserved)
Oct 30 08:14:45 woollyrat kernel: [    0.000000]  modified: 0000000000100000 - 00000000bf8a1000 (usable)
Oct 30 08:14:45 woollyrat kernel: [    0.000000]  modified: 00000000bf8a1000 - 00000000bf8a7000 (reserved)
Oct 30 08:14:45 woollyrat kernel: [    0.000000]  modified: 00000000bf8a7000 - 00000000bf9c2000 (usable)
Oct 30 08:14:45 woollyrat kernel: [    0.000000]  modified: 00000000bf9c2000 - 00000000bfa0f000 (reserved)
Oct 30 08:14:45 woollyrat kernel: [    0.000000]  modified: 00000000bfa0f000 - 00000000bfb09000 (usable)
Oct 30 08:14:45 woollyrat kernel: [    0.000000]  modified: 00000000bfb09000 - 00000000bfd0f000 (reserved)
Oct 30 08:14:45 woollyrat kernel: [    0.000000]  modified: 00000000bfd0f000 - 00000000bfd18000 (usable)
Oct 30 08:14:45 woollyrat kernel: [    0.000000]  modified: 00000000bfd18000 - 00000000bfd1f000 (reserved)
Oct 30 08:14:45 woollyrat kernel: [    0.000000]  modified: 00000000bfd1f000 - 00000000bfd63000 (usable)
Oct 30 08:14:45 woollyrat kernel: [    0.000000]  modified: 00000000bfd63000 - 00000000bfd9f000 (ACPI NVS)
Oct 30 08:14:45 woollyrat kernel: [    0.000000]  modified: 00000000bfd9f000 - 00000000bfde4000 (usable)
Oct 30 08:14:45 woollyrat kernel: [    0.000000]  modified: 00000000bfde4000 - 00000000bfdff000 (ACPI data)
Oct 30 08:14:45 woollyrat kernel: [    0.000000]  modified: 00000000bfdff000 - 00000000bfe00000 (usable)
Oct 30 08:14:45 woollyrat kernel: [    0.000000]  modified: 00000000bfe00000 - 00000000c0000000 (reserved)
Oct 30 08:14:45 woollyrat kernel: [    0.000000]  modified: 00000000e0000000 - 00000000f0000000 (reserved)
Oct 30 08:14:45 woollyrat kernel: [    0.000000]  modified: 00000000fec00000 - 00000000fec10000 (reserved)
Oct 30 08:14:45 woollyrat kernel: [    0.000000]  modified: 00000000fed00000 - 00000000fed00400 (reserved)
Oct 30 08:14:45 woollyrat kernel: [    0.000000]  modified: 00000000fed10000 - 00000000fed14000 (reserved)
Oct 30 08:14:45 woollyrat kernel: [    0.000000]  modified: 00000000fed18000 - 00000000fed1a000 (reserved)
Oct 30 08:14:45 woollyrat kernel: [    0.000000]  modified: 00000000fed1c000 - 00000000fed90000 (reserved)
Oct 30 08:14:45 woollyrat kernel: [    0.000000]  modified: 00000000fee00000 - 00000000fee01000 (reserved)
Oct 30 08:14:45 woollyrat kernel: [    0.000000]  modified: 00000000ff800000 - 0000000100000000 (reserved)
Oct 30 08:14:45 woollyrat kernel: [    0.000000] initial memory mapped : 0 - 20000000
Oct 30 08:14:45 woollyrat kernel: [    0.000000] init_memory_mapping: 0000000000000000-00000000bfe00000
Oct 30 08:14:45 woollyrat kernel: [    0.000000] Using x86 segment limits to approximate NX protection
Oct 30 08:14:45 woollyrat kernel: [    0.000000]  0000000000 - 00bfe00000 page 2M
Oct 30 08:14:45 woollyrat kernel: [    0.000000] kernel direct mapping tables up to bfe00000 @ 8000-c000
Oct 30 08:14:45 woollyrat kernel: [    0.000000] RAMDISK: 37834000 - 37fef955
Oct 30 08:14:45 woollyrat kernel: [    0.000000] ACPI: RSDP 00000000000f7900 00024 (v02 PTLTD )
Oct 30 08:14:45 woollyrat kernel: [    0.000000] ACPI: XSDT 00000000bfdf7f18 00074 (v01 DELL    M09     06040000  LTP 00000000)
Oct 30 08:14:45 woollyrat kernel: [    0.000000] ACPI: FACP 00000000bfde8000 000F4 (v03 INTEL  CRESTLNE 06040000 ALAN 00000001)
Oct 30 08:14:45 woollyrat kernel: [    0.000000] ACPI: DSDT 00000000bfde9000 06BFA (v02 Intel  CANTIGA  06040000 INTL 20050624)
Oct 30 08:14:45 woollyrat kernel: [    0.000000] ACPI: FACS 00000000bfd9efc0 00040
Oct 30 08:14:45 woollyrat kernel: [    0.000000] ACPI: HPET 00000000bfdfed16 00038 (v01 INTEL  CRESTLNE 06040000 LOHR 0000005A)
Oct 30 08:14:45 woollyrat kernel: [    0.000000] ACPI: MCFG 00000000bfdfed4e 0003C (v01 INTEL  CRESTLNE 06040000 LOHR 0000005A)
Oct 30 08:14:45 woollyrat kernel: [    0.000000] ACPI: APIC 00000000bfdfed8a 00068 (v01 PTLTD  	 APIC   06040000  LTP 00000000)
Oct 30 08:14:45 woollyrat kernel: [    0.000000] ACPI: BOOT 00000000bfdfedf2 00028 (v01 PTLTD  $SBFTBL$ 06040000  LTP 00000001)
Oct 30 08:14:45 woollyrat kernel: [    0.000000] ACPI: SLIC 00000000bfdfee1a 00176 (v01 DELL    M09     06040000  LTP 00000000)
Oct 30 08:14:45 woollyrat kernel: [    0.000000] ACPI: OSFR 00000000bfdfef90 00070 (v01 DELL   DELL     06040000 ASL  00000061)
Oct 30 08:14:45 woollyrat kernel: [    0.000000] ACPI: SSDT 00000000bfde7000 00655 (v01  PmRef    CpuPm 00003000 INTL 20050624)
Oct 30 08:14:45 woollyrat kernel: [    0.000000] ACPI: SSDT 00000000bfde6000 00259 (v01  PmRef  Cpu0Tst 00003000 INTL 20050624)
Oct 30 08:14:45 woollyrat kernel: [    0.000000] ACPI: SSDT 00000000bfde5000 0020F (v01  PmRef    ApTst 00003000 INTL 20050624)
Oct 30 08:14:45 woollyrat kernel: [    0.000000] ACPI: Local APIC address 0xfee00000
Oct 30 08:14:45 woollyrat kernel: [    0.000000] No NUMA configuration found
Oct 30 08:14:45 woollyrat kernel: [    0.000000] Faking a node at 0000000000000000-00000000bfe00000
Oct 30 08:14:45 woollyrat kernel: [    0.000000] Bootmem setup node 0 0000000000000000-00000000bfe00000
Oct 30 08:14:45 woollyrat kernel: [    0.000000]   NODE_DATA [000000000000a000 - 000000000000efff]
Oct 30 08:14:45 woollyrat kernel: [    0.000000]   bootmap [000000000000f000 -  0000000000026fbf] pages 18
Oct 30 08:14:45 woollyrat kernel: [    0.000000] (7 early reservations) ==> bootmem [0000000000 - 00bfe00000]
Oct 30 08:14:45 woollyrat kernel: [    0.000000]   #0 [0000000000 - 0000001000]   BIOS data page ==> [0000000000 - 0000001000]
Oct 30 08:14:45 woollyrat kernel: [    0.000000]   #1 [0000006000 - 0000008000]       TRAMPOLINE ==> [0000006000 - 0000008000]
Oct 30 08:14:45 woollyrat kernel: [    0.000000]   #2 [0001000000 - 00019e2ccc]    TEXT DATA BSS ==> [0001000000 - 00019e2ccc]
Oct 30 08:14:45 woollyrat kernel: [    0.000000]   #3 [0037834000 - 0037fef955]          RAMDISK ==> [0037834000 - 0037fef955]
Oct 30 08:14:45 woollyrat kernel: [    0.000000]   #4 [000009c400 - 0000100000]    BIOS reserved ==> [000009c400 - 0000100000]
Oct 30 08:14:45 woollyrat kernel: [    0.000000]   #5 [00019e3000 - 00019e31cc]              BRK ==> [00019e3000 - 00019e31cc]
Oct 30 08:14:45 woollyrat kernel: [    0.000000]   #6 [0000008000 - 000000a000]          PGTABLE ==> [0000008000 - 000000a000]
Oct 30 08:14:45 woollyrat kernel: [    0.000000] found SMP MP-table at [ffff8800000f79b0] f79b0
Oct 30 08:14:45 woollyrat kernel: [    0.000000]  [ffffea0000000000-ffffea00029fffff] PMD -> [ffff880001e00000-ffff8800047fffff] on node 0
Oct 30 08:14:45 woollyrat kernel: [    0.000000] Zone PFN ranges:
Oct 30 08:14:45 woollyrat kernel: [    0.000000]   DMA      0x00000000 -> 0x00001000
Oct 30 08:14:45 woollyrat kernel: [    0.000000]   DMA32    0x00001000 -> 0x00100000
Oct 30 08:14:45 woollyrat kernel: [    0.000000]   Normal   0x00100000 -> 0x00100000
Oct 30 08:14:45 woollyrat kernel: [    0.000000] Movable zone start PFN for each node
Oct 30 08:14:45 woollyrat kernel: [    0.000000] early_node_map[9] active PFN ranges
Oct 30 08:14:45 woollyrat kernel: [    0.000000]     0: 0x00000000 -> 0x00000001
Oct 30 08:14:45 woollyrat kernel: [    0.000000]     0: 0x00000006 -> 0x0000009c
Oct 30 08:14:45 woollyrat kernel: [    0.000000]     0: 0x00000100 -> 0x000bf8a1
Oct 30 08:14:45 woollyrat kernel: [    0.000000]     0: 0x000bf8a7 -> 0x000bf9c2
Oct 30 08:14:45 woollyrat kernel: [    0.000000]     0: 0x000bfa0f -> 0x000bfb09
Oct 30 08:14:45 woollyrat kernel: [    0.000000]     0: 0x000bfd0f -> 0x000bfd18
Oct 30 08:14:45 woollyrat kernel: [    0.000000]     0: 0x000bfd1f -> 0x000bfd63
Oct 30 08:14:45 woollyrat kernel: [    0.000000]     0: 0x000bfd9f -> 0x000bfde4
Oct 30 08:14:45 woollyrat kernel: [    0.000000]     0: 0x000bfdff -> 0x000bfe00
Oct 30 08:14:45 woollyrat kernel: [    0.000000] On node 0 totalpages: 785120
Oct 30 08:14:45 woollyrat kernel: [    0.000000]   DMA zone: 56 pages used for memmap
Oct 30 08:14:45 woollyrat kernel: [    0.000000]   DMA zone: 104 pages reserved
Oct 30 08:14:45 woollyrat kernel: [    0.000000]   DMA zone: 3831 pages, LIFO batch:0
Oct 30 08:14:45 woollyrat kernel: [    0.000000]   DMA32 zone: 10689 pages used for memmap
Oct 30 08:14:45 woollyrat kernel: [    0.000000]   DMA32 zone: 770440 pages, LIFO batch:31
Oct 30 08:14:45 woollyrat kernel: [    0.000000] ACPI: PM-Timer IO Port: 0x408
Oct 30 08:14:45 woollyrat kernel: [    0.000000] ACPI: Local APIC address 0xfee00000
Oct 30 08:14:45 woollyrat kernel: [    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
Oct 30 08:14:45 woollyrat kernel: [    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
Oct 30 08:14:45 woollyrat kernel: [    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
Oct 30 08:14:45 woollyrat kernel: [    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
Oct 30 08:14:45 woollyrat kernel: [    0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
Oct 30 08:14:45 woollyrat kernel: [    0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
Oct 30 08:14:45 woollyrat kernel: [    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
Oct 30 08:14:45 woollyrat kernel: [    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
Oct 30 08:14:45 woollyrat kernel: [    0.000000] ACPI: IRQ0 used by override.
Oct 30 08:14:45 woollyrat kernel: [    0.000000] ACPI: IRQ2 used by override.
Oct 30 08:14:45 woollyrat kernel: [    0.000000] ACPI: IRQ9 used by override.
Oct 30 08:14:45 woollyrat kernel: [    0.000000] Using ACPI (MADT) for SMP configuration information
Oct 30 08:14:45 woollyrat kernel: [    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
Oct 30 08:14:45 woollyrat kernel: [    0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
Oct 30 08:14:45 woollyrat kernel: [    0.000000] nr_irqs_gsi: 24
Oct 30 08:14:45 woollyrat kernel: [    0.000000] PM: Registered nosave memory: 0000000000001000 - 0000000000006000
Oct 30 08:14:45 woollyrat kernel: [    0.000000] PM: Registered nosave memory: 000000000009c000 - 000000000009d000
Oct 30 08:14:45 woollyrat kernel: [    0.000000] PM: Registered nosave memory: 000000000009d000 - 00000000000a0000
Oct 30 08:14:45 woollyrat kernel: [    0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000d2000
Oct 30 08:14:45 woollyrat kernel: [    0.000000] PM: Registered nosave memory: 00000000000d2000 - 00000000000d4000
Oct 30 08:14:45 woollyrat kernel: [    0.000000] PM: Registered nosave memory: 00000000000d4000 - 00000000000e0000
Oct 30 08:14:45 woollyrat kernel: [    0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
Oct 30 08:14:45 woollyrat kernel: [    0.000000] PM: Registered nosave memory: 00000000bf8a1000 - 00000000bf8a7000
Oct 30 08:14:45 woollyrat kernel: [    0.000000] PM: Registered nosave memory: 00000000bf9c2000 - 00000000bfa0f000
Oct 30 08:14:45 woollyrat kernel: [    0.000000] PM: Registered nosave memory: 00000000bfb09000 - 00000000bfd0f000
Oct 30 08:14:45 woollyrat kernel: [    0.000000] PM: Registered nosave memory: 00000000bfd18000 - 00000000bfd1f000
Oct 30 08:14:45 woollyrat kernel: [    0.000000] PM: Registered nosave memory: 00000000bfd63000 - 00000000bfd9f000
Oct 30 08:14:45 woollyrat kernel: [    0.000000] PM: Registered nosave memory: 00000000bfde4000 - 00000000bfdff000
Oct 30 08:14:45 woollyrat kernel: [    0.000000] Allocating PCI resources starting at c0000000 (gap: c0000000:20000000)
Oct 30 08:14:45 woollyrat kernel: [    0.000000] NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:2 nr_node_ids:1
Oct 30 08:14:45 woollyrat kernel: [    0.000000] PERCPU: Embedded 30 pages at ffff880001a01000, static data 90720 bytes
Oct 30 08:14:45 woollyrat kernel: [    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 774271
Oct 30 08:14:45 woollyrat kernel: [    0.000000] Policy zone: DMA32
Oct 30 08:14:45 woollyrat kernel: [    0.000000] Kernel command line: root=UUID=cb599bee-3a51-46a7-b43c-03d910117f33 ro quiet splash 
Oct 30 08:14:45 woollyrat kernel: [    0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes)
Oct 30 08:14:45 woollyrat kernel: [    0.000000] Initializing CPU#0
Oct 30 08:14:45 woollyrat kernel: [    0.000000] xsave/xrstor: enabled xstate_bv 0x3, cntxt size 0x240
Oct 30 08:14:45 woollyrat kernel: [    0.000000] Checking aperture...
Oct 30 08:14:45 woollyrat kernel: [    0.000000] No AGP bridge found
Oct 30 08:14:45 woollyrat kernel: [    0.000000] Calgary: detecting Calgary via BIOS EBDA area
Oct 30 08:14:45 woollyrat kernel: [    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Oct 30 08:14:45 woollyrat kernel: [    0.000000] Memory: 3078964k/3143680k available (5313k kernel code, 3200k absent, 61516k reserved, 3011k data, 660k init)
Oct 30 08:14:45 woollyrat kernel: [    0.000000] SLUB: Genslabs=14, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
Oct 30 08:14:45 woollyrat kernel: [    0.000000] NR_IRQS:4352 nr_irqs:424
Oct 30 08:14:45 woollyrat kernel: [    0.000000] Extended CMOS year: 2000
Oct 30 08:14:45 woollyrat kernel: [    0.000000] Fast TSC calibration using PIT
Oct 30 08:14:45 woollyrat kernel: [    0.000000] Detected 2260.694 MHz processor.
Oct 30 08:14:45 woollyrat kernel: [    0.001075] Console: colour VGA+ 80x25
Oct 30 08:14:45 woollyrat kernel: [    0.001078] console [tty0] enabled
Oct 30 08:14:45 woollyrat kernel: [    0.010000] allocated 31457280 bytes of page_cgroup
Oct 30 08:14:45 woollyrat kernel: [    0.010000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
Oct 30 08:14:45 woollyrat kernel: [    0.010000] hpet clockevent registered
Oct 30 08:14:45 woollyrat kernel: [    0.010000] HPET: 4 timers in total, 0 timers will be used for per-cpu timer
Oct 30 08:14:45 woollyrat kernel: [    0.010000] Calibrating delay loop (skipped), value calculated using timer frequency.. 4521.38 BogoMIPS (lpj=22606940)
Oct 30 08:14:45 woollyrat kernel: [    0.010000] Security Framework initialized
Oct 30 08:14:45 woollyrat kernel: [    0.010000] AppArmor: AppArmor initialized
Oct 30 08:14:45 woollyrat kernel: [    0.010000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
Oct 30 08:14:45 woollyrat kernel: [    0.010000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
Oct 30 08:14:45 woollyrat kernel: [    0.010000] Mount-cache hash table entries: 256
Oct 30 08:14:45 woollyrat kernel: [    0.010000] Initializing cgroup subsys ns
Oct 30 08:14:45 woollyrat kernel: [    0.010000] Initializing cgroup subsys cpuacct
Oct 30 08:14:45 woollyrat kernel: [    0.010000] Initializing cgroup subsys memory
Oct 30 08:14:45 woollyrat kernel: [    0.010000] Initializing cgroup subsys freezer
Oct 30 08:14:45 woollyrat kernel: [    0.010000] Initializing cgroup subsys net_cls
Oct 30 08:14:45 woollyrat kernel: [    0.010000] CPU: L1 I cache: 32K, L1 D cache: 32K
Oct 30 08:14:45 woollyrat kernel: [    0.010000] CPU: L2 cache: 3072K
Oct 30 08:14:45 woollyrat kernel: [    0.010000] CPU 0/0x0 -> Node 0
Oct 30 08:14:45 woollyrat kernel: [    0.010000] CPU: Physical Processor ID: 0
Oct 30 08:14:45 woollyrat kernel: [    0.010000] CPU: Processor Core ID: 0
Oct 30 08:14:45 woollyrat kernel: [    0.010000] mce: CPU supports 6 MCE banks
Oct 30 08:14:45 woollyrat kernel: [    0.010000] CPU0: Thermal monitoring enabled (TM2)
Oct 30 08:14:45 woollyrat kernel: [    0.010000] using mwait in idle threads.
Oct 30 08:14:45 woollyrat kernel: [    0.010000] Performance Counters: Core2 events, Intel PMU driver.
Oct 30 08:14:45 woollyrat kernel: [    0.010000] ... version:                 2
Oct 30 08:14:45 woollyrat kernel: [    0.010000] ... bit width:               40
Oct 30 08:14:45 woollyrat kernel: [    0.010000] ... generic counters:        2
Oct 30 08:14:45 woollyrat kernel: [    0.010000] ... value mask:              000000ffffffffff
Oct 30 08:14:45 woollyrat kernel: [    0.010000] ... max period:              000000007fffffff
Oct 30 08:14:45 woollyrat kernel: [    0.010000] ... fixed-purpose counters:  3
Oct 30 08:14:45 woollyrat kernel: [    0.010000] ... counter mask:            0000000700000003
Oct 30 08:14:45 woollyrat kernel: [    0.010000] ACPI: Core revision 20090521
Oct 30 08:14:45 woollyrat kernel: [    0.020061] Setting APIC routing to flat
Oct 30 08:14:45 woollyrat kernel: [    0.020634] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
Oct 30 08:14:45 woollyrat kernel: [    0.133758] CPU0: Intel(R) Core(TM)2 Duo CPU     P8400  @ 2.26GHz stepping 0a
Oct 30 08:14:45 woollyrat kernel: [    0.140000] APIC calibration not consistent with PM-Timer: 1569ms instead of 100ms
Oct 30 08:14:45 woollyrat kernel: [    0.140000] APIC delta adjusted to PM-Timer: 1662094 (26094780)
Oct 30 08:14:45 woollyrat kernel: [    0.140000] Booting processor 1 APIC 0x1 ip 0x6000
Oct 30 08:14:45 woollyrat kernel: [    0.010000] Initializing CPU#1
Oct 30 08:14:45 woollyrat kernel: [    0.010000] Calibrating delay using timer specific routine.. 4520.91 BogoMIPS (lpj=22604594)
Oct 30 08:14:45 woollyrat kernel: [    0.010000] CPU: L1 I cache: 32K, L1 D cache: 32K
Oct 30 08:14:45 woollyrat kernel: [    0.010000] CPU: L2 cache: 3072K
Oct 30 08:14:45 woollyrat kernel: [    0.010000] CPU 1/0x1 -> Node 0
Oct 30 08:14:45 woollyrat kernel: [    0.010000] CPU: Physical Processor ID: 0
Oct 30 08:14:45 woollyrat kernel: [    0.010000] CPU: Processor Core ID: 1
Oct 30 08:14:45 woollyrat kernel: [    0.010000] mce: CPU supports 6 MCE banks
Oct 30 08:14:45 woollyrat kernel: [    0.010000] CPU1: Thermal monitoring enabled (TM2)
Oct 30 08:14:45 woollyrat kernel: [    0.010000] x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106
Oct 30 08:14:45 woollyrat kernel: [    0.291470] CPU1: Intel(R) Core(TM)2 Duo CPU     P8400  @ 2.26GHz stepping 0a
Oct 30 08:14:45 woollyrat kernel: [    0.291480] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
Oct 30 08:14:45 woollyrat kernel: [    0.300021] Brought up 2 CPUs
Oct 30 08:14:45 woollyrat kernel: [    0.300024] Total of 2 processors activated (9042.30 BogoMIPS).
Oct 30 08:14:45 woollyrat kernel: [    0.300073] CPU0 attaching sched-domain:
Oct 30 08:14:45 woollyrat kernel: [    0.300075]  domain 0: span 0-1 level MC
Oct 30 08:14:45 woollyrat kernel: [    0.300077]   groups: 0 1
Oct 30 08:14:45 woollyrat kernel: [    0.300082] CPU1 attaching sched-domain:
Oct 30 08:14:45 woollyrat kernel: [    0.300084]  domain 0: span 0-1 level MC
Oct 30 08:14:45 woollyrat kernel: [    0.300086]   groups: 1 0
Oct 30 08:14:45 woollyrat kernel: [    0.300152] Booting paravirtualized kernel on bare hardware
Oct 30 08:14:45 woollyrat kernel: [    0.300155] regulator: core version 0.5
Oct 30 08:14:45 woollyrat kernel: [    0.300155] Time:  8:14:27  Date: 10/30/09
Oct 30 08:14:45 woollyrat kernel: [    0.300155] NET: Registered protocol family 16
Oct 30 08:14:45 woollyrat kernel: [    0.300190] ACPI: bus type pci registered
Oct 30 08:14:45 woollyrat kernel: [    0.300261] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
Oct 30 08:14:45 woollyrat kernel: [    0.300264] PCI: MCFG area at e0000000 reserved in E820
Oct 30 08:14:45 woollyrat kernel: [    0.311417] PCI: Using MMCONFIG at e0000000 - efffffff
Oct 30 08:14:45 woollyrat kernel: [    0.311419] PCI: Using configuration type 1 for base access
Oct 30 08:14:45 woollyrat kernel: [    0.312149] bio: create slab <bio-0> at 0
Oct 30 08:14:45 woollyrat kernel: [    0.312149] ACPI: EC: Look up EC in DSDT
Oct 30 08:14:45 woollyrat kernel: [    0.314229] ACPI: BIOS _OSI(Linux) query ignored
Oct 30 08:14:45 woollyrat kernel: [    0.321317] ACPI: Interpreter enabled
Oct 30 08:14:45 woollyrat kernel: [    0.321320] ACPI: (supports S0 S3 S4 S5)
Oct 30 08:14:45 woollyrat kernel: [    0.321339] ACPI: Using IOAPIC for interrupt routing
Oct 30 08:14:45 woollyrat kernel: [    0.324520] ACPI: EC: non-query interrupt received, switching to interrupt mode
Oct 30 08:14:45 woollyrat kernel: [    0.350134] ACPI: EC: GPE = 0x1c, I/O: command/status = 0x66, data = 0x62
Oct 30 08:14:45 woollyrat kernel: [    0.350136] ACPI: EC: driver started in interrupt mode
Oct 30 08:14:45 woollyrat kernel: [    0.350475] ACPI: No dock devices found.
Oct 30 08:14:45 woollyrat kernel: [    0.350899] ACPI: PCI Root Bridge [PCI0] (0000:00)
Oct 30 08:14:45 woollyrat kernel: [    0.350994] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
Oct 30 08:14:45 woollyrat kernel: [    0.350998] pci 0000:00:01.0: PME# disabled
Oct 30 08:14:45 woollyrat kernel: [    0.351093] pci 0000:00:1a.0: reg 20 io port: [0x1800-0x181f]
Oct 30 08:14:45 woollyrat kernel: [    0.351181] pci 0000:00:1a.1: reg 20 io port: [0x1820-0x183f]
Oct 30 08:14:45 woollyrat kernel: [    0.351272] pci 0000:00:1a.2: reg 20 io port: [0x1840-0x185f]
Oct 30 08:14:45 woollyrat kernel: [    0.351367] pci 0000:00:1a.7: reg 10 32bit mmio: [0xfc504800-0xfc504bff]
Oct 30 08:14:45 woollyrat kernel: [    0.351433] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
Oct 30 08:14:45 woollyrat kernel: [    0.351438] pci 0000:00:1a.7: PME# disabled
Oct 30 08:14:45 woollyrat kernel: [    0.351492] pci 0000:00:1b.0: reg 10 64bit mmio: [0xfc500000-0xfc503fff]
Oct 30 08:14:45 woollyrat kernel: [    0.351551] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
Oct 30 08:14:45 woollyrat kernel: [    0.351555] pci 0000:00:1b.0: PME# disabled
Oct 30 08:14:45 woollyrat kernel: [    0.351637] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
Oct 30 08:14:45 woollyrat kernel: [    0.351641] pci 0000:00:1c.0: PME# disabled
Oct 30 08:14:45 woollyrat kernel: [    0.351724] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
Oct 30 08:14:45 woollyrat kernel: [    0.351729] pci 0000:00:1c.1: PME# disabled
Oct 30 08:14:45 woollyrat kernel: [    0.351815] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
Oct 30 08:14:45 woollyrat kernel: [    0.351819] pci 0000:00:1c.3: PME# disabled
Oct 30 08:14:45 woollyrat kernel: [    0.351904] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
Oct 30 08:14:45 woollyrat kernel: [    0.351908] pci 0000:00:1c.5: PME# disabled
Oct 30 08:14:45 woollyrat kernel: [    0.351980] pci 0000:00:1d.0: reg 20 io port: [0x1860-0x187f]
Oct 30 08:14:45 woollyrat kernel: [    0.352075] pci 0000:00:1d.1: reg 20 io port: [0x1880-0x189f]
Oct 30 08:14:45 woollyrat kernel: [    0.352173] pci 0000:00:1d.2: reg 20 io port: [0x18a0-0x18bf]
Oct 30 08:14:45 woollyrat kernel: [    0.352264] pci 0000:00:1d.7: reg 10 32bit mmio: [0xfc504c00-0xfc504fff]
Oct 30 08:14:45 woollyrat kernel: [    0.352331] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
Oct 30 08:14:45 woollyrat kernel: [    0.352336] pci 0000:00:1d.7: PME# disabled
Oct 30 08:14:45 woollyrat kernel: [    0.352576] pci 0000:00:1f.2: reg 10 io port: [0x18f0-0x18f7]
Oct 30 08:14:45 woollyrat kernel: [    0.352583] pci 0000:00:1f.2: reg 14 io port: [0x18e4-0x18e7]
Oct 30 08:14:45 woollyrat kernel: [    0.352590] pci 0000:00:1f.2: reg 18 io port: [0x18e8-0x18ef]
Oct 30 08:14:45 woollyrat kernel: [    0.352598] pci 0000:00:1f.2: reg 1c io port: [0x18e0-0x18e3]
Oct 30 08:14:45 woollyrat kernel: [    0.352605] pci 0000:00:1f.2: reg 20 io port: [0x18c0-0x18df]
Oct 30 08:14:45 woollyrat kernel: [    0.352612] pci 0000:00:1f.2: reg 24 32bit mmio: [0xfc504000-0xfc5047ff]
Oct 30 08:14:45 woollyrat kernel: [    0.352657] pci 0000:00:1f.2: PME# supported from D3hot
Oct 30 08:14:45 woollyrat kernel: [    0.352662] pci 0000:00:1f.2: PME# disabled
Oct 30 08:14:45 woollyrat kernel: [    0.352701] pci 0000:00:1f.3: reg 10 64bit mmio: [0x000000-0x0000ff]
Oct 30 08:14:45 woollyrat kernel: [    0.352719] pci 0000:00:1f.3: reg 20 io port: [0x1c00-0x1c1f]
Oct 30 08:14:45 woollyrat kernel: [    0.352780] pci 0000:01:00.0: reg 10 32bit mmio: [0xd0000000-0xdfffffff]
Oct 30 08:14:45 woollyrat kernel: [    0.352787] pci 0000:01:00.0: reg 14 io port: [0x2000-0x20ff]
Oct 30 08:14:45 woollyrat kernel: [    0.352794] pci 0000:01:00.0: reg 18 32bit mmio: [0xfc000000-0xfc00ffff]
Oct 30 08:14:45 woollyrat kernel: [    0.352818] pci 0000:01:00.0: reg 30 32bit mmio: [0x000000-0x01ffff]
Oct 30 08:14:45 woollyrat kernel: [    0.352845] pci 0000:01:00.0: supports D1 D2
Oct 30 08:14:45 woollyrat kernel: [    0.352887] pci 0000:01:00.1: reg 10 32bit mmio: [0xfc010000-0xfc013fff]
Oct 30 08:14:45 woollyrat kernel: [    0.352947] pci 0000:01:00.1: supports D1 D2
Oct 30 08:14:45 woollyrat kernel: [    0.357659] pci 0000:00:01.0: bridge io port: [0x2000-0x2fff]
Oct 30 08:14:45 woollyrat kernel: [    0.357662] pci 0000:00:01.0: bridge 32bit mmio: [0xfc000000-0xfc0fffff]
Oct 30 08:14:45 woollyrat kernel: [    0.357666] pci 0000:00:01.0: bridge 64bit mmio pref: [0xd0000000-0xdfffffff]
Oct 30 08:14:45 woollyrat kernel: [    0.357725] pci 0000:00:1c.0: bridge io port: [0x3000-0x3fff]
Oct 30 08:14:45 woollyrat kernel: [    0.357730] pci 0000:00:1c.0: bridge 32bit mmio: [0xf6000000-0xf7ffffff]
Oct 30 08:14:45 woollyrat kernel: [    0.357737] pci 0000:00:1c.0: bridge 64bit mmio pref: [0xf0000000-0xf1ffffff]
Oct 30 08:14:45 woollyrat kernel: [    0.358086] pci 0000:04:00.0: reg 10 64bit mmio: [0xf8000000-0xf8003fff]
Oct 30 08:14:45 woollyrat kernel: [    0.358294] pci 0000:04:00.0: supports D1 D2
Oct 30 08:14:45 woollyrat kernel: [    0.358296] pci 0000:04:00.0: PME# supported from D0 D3hot D3cold
Oct 30 08:14:45 woollyrat kernel: [    0.358306] pci 0000:04:00.0: PME# disabled
Oct 30 08:14:45 woollyrat kernel: [    0.358429] pci 0000:00:1c.1: bridge io port: [0x4000-0x4fff]
Oct 30 08:14:45 woollyrat kernel: [    0.358434] pci 0000:00:1c.1: bridge 32bit mmio: [0xf8000000-0xf9ffffff]
Oct 30 08:14:45 woollyrat kernel: [    0.358441] pci 0000:00:1c.1: bridge 64bit mmio pref: [0xf2000000-0xf3ffffff]
Oct 30 08:14:45 woollyrat kernel: [    0.358502] pci 0000:00:1c.3: bridge io port: [0x5000-0x5fff]
Oct 30 08:14:45 woollyrat kernel: [    0.358507] pci 0000:00:1c.3: bridge 32bit mmio: [0xfa000000-0xfbffffff]
Oct 30 08:14:45 woollyrat kernel: [    0.358514] pci 0000:00:1c.3: bridge 64bit mmio pref: [0xf4000000-0xf5ffffff]
Oct 30 08:14:45 woollyrat kernel: [    0.360045] pci 0000:08:00.0: reg 10 64bit mmio: [0xfc100000-0xfc10ffff]
Oct 30 08:14:45 woollyrat kernel: [    0.360147] pci 0000:08:00.0: PME# supported from D3hot D3cold
Oct 30 08:14:45 woollyrat kernel: [    0.360155] pci 0000:08:00.0: PME# disabled
Oct 30 08:14:45 woollyrat kernel: [    0.360235] pci 0000:00:1c.5: bridge 32bit mmio: [0xfc100000-0xfc1fffff]
Oct 30 08:14:45 woollyrat kernel: [    0.360288] pci 0000:09:01.0: reg 10 32bit mmio: [0xfc200000-0xfc2007ff]
Oct 30 08:14:45 woollyrat kernel: [    0.360353] pci 0000:09:01.0: supports D1 D2
Oct 30 08:14:45 woollyrat kernel: [    0.360355] pci 0000:09:01.0: PME# supported from D0 D1 D2 D3hot D3cold
Oct 30 08:14:45 woollyrat kernel: [    0.360360] pci 0000:09:01.0: PME# disabled
Oct 30 08:14:45 woollyrat kernel: [    0.360404] pci 0000:09:01.1: reg 10 32bit mmio: [0xfc200800-0xfc2008ff]
Oct 30 08:14:45 woollyrat kernel: [    0.360469] pci 0000:09:01.1: supports D1 D2
Oct 30 08:14:45 woollyrat kernel: [    0.360471] pci 0000:09:01.1: PME# supported from D0 D1 D2 D3hot D3cold
Oct 30 08:14:45 woollyrat kernel: [    0.360476] pci 0000:09:01.1: PME# disabled
Oct 30 08:14:45 woollyrat kernel: [    0.360522] pci 0000:09:01.2: reg 10 32bit mmio: [0xfc200c00-0xfc200cff]
Oct 30 08:14:45 woollyrat kernel: [    0.360588] pci 0000:09:01.2: supports D1 D2
Oct 30 08:14:45 woollyrat kernel: [    0.360589] pci 0000:09:01.2: PME# supported from D0 D1 D2 D3hot D3cold
Oct 30 08:14:45 woollyrat kernel: [    0.360595] pci 0000:09:01.2: PME# disabled
Oct 30 08:14:45 woollyrat kernel: [    0.360640] pci 0000:09:01.3: reg 10 32bit mmio: [0xfc201000-0xfc2010ff]
Oct 30 08:14:45 woollyrat kernel: [    0.360706] pci 0000:09:01.3: supports D1 D2
Oct 30 08:14:45 woollyrat kernel: [    0.360707] pci 0000:09:01.3: PME# supported from D0 D1 D2 D3hot D3cold
Oct 30 08:14:45 woollyrat kernel: [    0.360712] pci 0000:09:01.3: PME# disabled
Oct 30 08:14:45 woollyrat kernel: [    0.360780] pci 0000:00:1e.0: transparent bridge
Oct 30 08:14:45 woollyrat kernel: [    0.360787] pci 0000:00:1e.0: bridge 32bit mmio: [0xfc200000-0xfc2fffff]
Oct 30 08:14:45 woollyrat kernel: [    0.360829] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
Oct 30 08:14:45 woollyrat kernel: [    0.360944] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2._PRT]
Oct 30 08:14:45 woollyrat kernel: [    0.361005] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
Oct 30 08:14:45 woollyrat kernel: [    0.361092] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
Oct 30 08:14:45 woollyrat kernel: [    0.361158] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
Oct 30 08:14:45 woollyrat kernel: [    0.361221] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT]
Oct 30 08:14:45 woollyrat kernel: [    0.361274] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP06._PRT]
Oct 30 08:14:45 woollyrat kernel: [    0.372051] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 *5 6 7 10 12 14 15)
Oct 30 08:14:45 woollyrat kernel: [    0.372149] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 *11 12 14 15)
Oct 30 08:14:45 woollyrat kernel: [    0.372245] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 *10 12 14 15)
Oct 30 08:14:45 woollyrat kernel: [    0.372340] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
Oct 30 08:14:45 woollyrat kernel: [    0.372436] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
Oct 30 08:14:45 woollyrat kernel: [    0.372532] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 *11 12 14 15)
Oct 30 08:14:45 woollyrat kernel: [    0.372630] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 *10 12 14 15)
Oct 30 08:14:45 woollyrat kernel: [    0.372726] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 *7 11 12 14 15)
Oct 30 08:14:45 woollyrat kernel: [    0.372880] SCSI subsystem initialized
Oct 30 08:14:45 woollyrat kernel: [    0.372887] libata version 3.00 loaded.
Oct 30 08:14:45 woollyrat kernel: [    0.372887] usbcore: registered new interface driver usbfs
Oct 30 08:14:45 woollyrat kernel: [    0.372887] usbcore: registered new interface driver hub
Oct 30 08:14:45 woollyrat kernel: [    0.372887] usbcore: registered new device driver usb
Oct 30 08:14:45 woollyrat kernel: [    0.372887] ACPI: WMI: Mapper loaded
Oct 30 08:14:45 woollyrat kernel: [    0.372887] PCI: Using ACPI for IRQ routing
Oct 30 08:14:45 woollyrat kernel: [    0.400006] Bluetooth: Core ver 2.15
Oct 30 08:14:45 woollyrat kernel: [    0.400010] NET: Registered protocol family 31
Oct 30 08:14:45 woollyrat kernel: [    0.400011] Bluetooth: HCI device and connection manager initialized
Oct 30 08:14:45 woollyrat kernel: [    0.400014] Bluetooth: HCI socket layer initialized
Oct 30 08:14:45 woollyrat kernel: [    0.400015] NetLabel: Initializing
Oct 30 08:14:45 woollyrat kernel: [    0.400017] NetLabel:  domain hash size = 128
Oct 30 08:14:45 woollyrat kernel: [    0.400018] NetLabel:  protocols = UNLABELED CIPSOv4
Oct 30 08:14:45 woollyrat kernel: [    0.400029] NetLabel:  unlabeled traffic allowed by default
Oct 30 08:14:45 woollyrat kernel: [    0.400074] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
Oct 30 08:14:45 woollyrat kernel: [    0.400078] hpet0: 4 comparators, 64-bit 14.318180 MHz counter
Oct 30 08:14:45 woollyrat kernel: [    0.441503] pnp: PnP ACPI init
Oct 30 08:14:45 woollyrat kernel: [    0.441511] ACPI: bus type pnp registered
Oct 30 08:14:45 woollyrat kernel: [    0.443798] pnp: PnP ACPI: found 10 devices
Oct 30 08:14:45 woollyrat kernel: [    0.443800] ACPI: ACPI bus type pnp unregistered
Oct 30 08:14:45 woollyrat kernel: [    0.443810] system 00:02: iomem range 0xfed00000-0xfed003ff has been reserved
Oct 30 08:14:45 woollyrat kernel: [    0.443816] system 00:04: ioport range 0x400-0x47f has been reserved
Oct 30 08:14:45 woollyrat kernel: [    0.443818] system 00:04: ioport range 0x680-0x69f has been reserved
Oct 30 08:14:45 woollyrat kernel: [    0.443820] system 00:04: ioport range 0x480-0x48f has been reserved
Oct 30 08:14:45 woollyrat kernel: [    0.443823] system 00:04: ioport range 0xffff-0xffff has been reserved
Oct 30 08:14:45 woollyrat kernel: [    0.443825] system 00:04: ioport range 0xffff-0xffff has been reserved
Oct 30 08:14:45 woollyrat kernel: [    0.443828] system 00:04: ioport range 0x1000-0x107f has been reserved
Oct 30 08:14:45 woollyrat kernel: [    0.443830] system 00:04: ioport range 0x1180-0x11ff has been reserved
Oct 30 08:14:45 woollyrat kernel: [    0.443833] system 00:04: ioport range 0x164e-0x164f has been reserved
Oct 30 08:14:45 woollyrat kernel: [    0.443835] system 00:04: ioport range 0xfe00-0xfe00 has been reserved
Oct 30 08:14:45 woollyrat kernel: [    0.443837] system 00:04: ioport range 0x900-0x97f has been reserved
Oct 30 08:14:45 woollyrat kernel: [    0.443843] system 00:09: iomem range 0xfed1c000-0xfed1ffff has been reserved
Oct 30 08:14:45 woollyrat kernel: [    0.443846] system 00:09: iomem range 0xfed10000-0xfed13fff has been reserved
Oct 30 08:14:45 woollyrat kernel: [    0.443848] system 00:09: iomem range 0xfed18000-0xfed18fff has been reserved
Oct 30 08:14:45 woollyrat kernel: [    0.443851] system 00:09: iomem range 0xfed19000-0xfed19fff has been reserved
Oct 30 08:14:45 woollyrat kernel: [    0.443853] system 00:09: iomem range 0xe0000000-0xefffffff has been reserved
Oct 30 08:14:45 woollyrat kernel: [    0.443856] system 00:09: iomem range 0xfeb00000-0xfeb03fff has been reserved
Oct 30 08:14:45 woollyrat kernel: [    0.443858] system 00:09: iomem range 0xfed20000-0xfed3ffff has been reserved
Oct 30 08:14:45 woollyrat kernel: [    0.443861] system 00:09: iomem range 0xfed40000-0xfed44fff has been reserved
Oct 30 08:14:45 woollyrat kernel: [    0.443863] system 00:09: iomem range 0xfed45000-0xfed8ffff has been reserved
Oct 30 08:14:45 woollyrat kernel: [    0.448545] AppArmor: AppArmor Filesystem Enabled
Oct 30 08:14:45 woollyrat kernel: [    0.448617] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
Oct 30 08:14:45 woollyrat kernel: [    0.448620] pci 0000:00:01.0:   IO window: 0x2000-0x2fff
Oct 30 08:14:45 woollyrat kernel: [    0.448623] pci 0000:00:01.0:   MEM window: 0xfc000000-0xfc0fffff
Oct 30 08:14:45 woollyrat kernel: [    0.448627] pci 0000:00:01.0:   PREFETCH window: 0x000000d0000000-0x000000dfffffff
Oct 30 08:14:45 woollyrat kernel: [    0.448631] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:02
Oct 30 08:14:45 woollyrat kernel: [    0.448634] pci 0000:00:1c.0:   IO window: 0x3000-0x3fff
Oct 30 08:14:45 woollyrat kernel: [    0.448639] pci 0000:00:1c.0:   MEM window: 0xf6000000-0xf7ffffff
Oct 30 08:14:45 woollyrat kernel: [    0.448644] pci 0000:00:1c.0:   PREFETCH window: 0x000000f0000000-0x000000f1ffffff
Oct 30 08:14:45 woollyrat kernel: [    0.448651] pci 0000:00:1c.1: PCI bridge, secondary bus 0000:04
Oct 30 08:14:45 woollyrat kernel: [    0.448654] pci 0000:00:1c.1:   IO window: 0x4000-0x4fff
Oct 30 08:14:45 woollyrat kernel: [    0.448660] pci 0000:00:1c.1:   MEM window: 0xf8000000-0xf9ffffff
Oct 30 08:14:45 woollyrat kernel: [    0.448664] pci 0000:00:1c.1:   PREFETCH window: 0x000000f2000000-0x000000f3ffffff
Oct 30 08:14:45 woollyrat kernel: [    0.448671] pci 0000:00:1c.3: PCI bridge, secondary bus 0000:06
Oct 30 08:14:45 woollyrat kernel: [    0.448674] pci 0000:00:1c.3:   IO window: 0x5000-0x5fff
Oct 30 08:14:45 woollyrat kernel: [    0.448679] pci 0000:00:1c.3:   MEM window: 0xfa000000-0xfbffffff
Oct 30 08:14:45 woollyrat kernel: [    0.448684] pci 0000:00:1c.3:   PREFETCH window: 0x000000f4000000-0x000000f5ffffff
Oct 30 08:14:45 woollyrat kernel: [    0.448691] pci 0000:00:1c.5: PCI bridge, secondary bus 0000:08
Oct 30 08:14:45 woollyrat kernel: [    0.448692] pci 0000:00:1c.5:   IO window: disabled
Oct 30 08:14:45 woollyrat kernel: [    0.448698] pci 0000:00:1c.5:   MEM window: 0xfc100000-0xfc1fffff
Oct 30 08:14:45 woollyrat kernel: [    0.448703] pci 0000:00:1c.5:   PREFETCH window: disabled
Oct 30 08:14:45 woollyrat kernel: [    0.448707] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:09
Oct 30 08:14:45 woollyrat kernel: [    0.448709] pci 0000:00:1e.0:   IO window: disabled
Oct 30 08:14:45 woollyrat kernel: [    0.448714] pci 0000:00:1e.0:   MEM window: 0xfc200000-0xfc2fffff
Oct 30 08:14:45 woollyrat kernel: [    0.448718] pci 0000:00:1e.0:   PREFETCH window: disabled
Oct 30 08:14:45 woollyrat kernel: [    0.448728]   alloc irq_desc for 16 on node 0
Oct 30 08:14:45 woollyrat kernel: [    0.448729]   alloc kstat_irqs on node 0
Oct 30 08:14:45 woollyrat kernel: [    0.448734] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
Oct 30 08:14:45 woollyrat kernel: [    0.448737] pci 0000:00:01.0: setting latency timer to 64
Oct 30 08:14:45 woollyrat kernel: [    0.448744]   alloc irq_desc for 17 on node 0
Oct 30 08:14:45 woollyrat kernel: [    0.448745]   alloc kstat_irqs on node 0
Oct 30 08:14:45 woollyrat kernel: [    0.448748] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
Oct 30 08:14:45 woollyrat kernel: [    0.448752] pci 0000:00:1c.0: setting latency timer to 64
Oct 30 08:14:45 woollyrat kernel: [    0.448760] pci 0000:00:1c.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16
Oct 30 08:14:45 woollyrat kernel: [    0.448764] pci 0000:00:1c.1: setting latency timer to 64
Oct 30 08:14:45 woollyrat kernel: [    0.448772]   alloc irq_desc for 19 on node 0
Oct 30 08:14:45 woollyrat kernel: [    0.448773]   alloc kstat_irqs on node 0
Oct 30 08:14:45 woollyrat kernel: [    0.448776] pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
Oct 30 08:14:45 woollyrat kernel: [    0.448780] pci 0000:00:1c.3: setting latency timer to 64
Oct 30 08:14:45 woollyrat kernel: [    0.448787] pci 0000:00:1c.5: PCI INT B -> GSI 16 (level, low) -> IRQ 16
Oct 30 08:14:45 woollyrat kernel: [    0.448792] pci 0000:00:1c.5: setting latency timer to 64
Oct 30 08:14:45 woollyrat kernel: [    0.448798] pci 0000:00:1e.0: setting latency timer to 64
Oct 30 08:14:45 woollyrat kernel: [    0.448802] pci_bus 0000:00: resource 0 io:  [0x00-0xffff]
Oct 30 08:14:45 woollyrat kernel: [    0.448805] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff]
Oct 30 08:14:45 woollyrat kernel: [    0.448807] pci_bus 0000:01: resource 0 io:  [0x2000-0x2fff]
Oct 30 08:14:45 woollyrat kernel: [    0.448809] pci_bus 0000:01: resource 1 mem: [0xfc000000-0xfc0fffff]
Oct 30 08:14:45 woollyrat kernel: [    0.448811] pci_bus 0000:01: resource 2 pref mem [0xd0000000-0xdfffffff]
Oct 30 08:14:45 woollyrat kernel: [    0.448813] pci_bus 0000:02: resource 0 io:  [0x3000-0x3fff]
Oct 30 08:14:45 woollyrat kernel: [    0.448815] pci_bus 0000:02: resource 1 mem: [0xf6000000-0xf7ffffff]
Oct 30 08:14:45 woollyrat kernel: [    0.448817] pci_bus 0000:02: resource 2 pref mem [0xf0000000-0xf1ffffff]
Oct 30 08:14:45 woollyrat kernel: [    0.448819] pci_bus 0000:04: resource 0 io:  [0x4000-0x4fff]
Oct 30 08:14:45 woollyrat kernel: [    0.448821] pci_bus 0000:04: resource 1 mem: [0xf8000000-0xf9ffffff]
Oct 30 08:14:45 woollyrat kernel: [    0.448823] pci_bus 0000:04: resource 2 pref mem [0xf2000000-0xf3ffffff]
Oct 30 08:14:45 woollyrat kernel: [    0.448825] pci_bus 0000:06: resource 0 io:  [0x5000-0x5fff]
Oct 30 08:14:45 woollyrat kernel: [    0.448827] pci_bus 0000:06: resource 1 mem: [0xfa000000-0xfbffffff]
Oct 30 08:14:45 woollyrat kernel: [    0.448829] pci_bus 0000:06: resource 2 pref mem [0xf4000000-0xf5ffffff]
Oct 30 08:14:45 woollyrat kernel: [    0.448831] pci_bus 0000:08: resource 1 mem: [0xfc100000-0xfc1fffff]
Oct 30 08:14:45 woollyrat kernel: [    0.448834] pci_bus 0000:09: resource 1 mem: [0xfc200000-0xfc2fffff]
Oct 30 08:14:45 woollyrat kernel: [    0.448836] pci_bus 0000:09: resource 3 io:  [0x00-0xffff]
Oct 30 08:14:45 woollyrat kernel: [    0.448838] pci_bus 0000:09: resource 4 mem: [0x000000-0xffffffffffffffff]
Oct 30 08:14:45 woollyrat kernel: [    0.448865] NET: Registered protocol family 2
Oct 30 08:14:45 woollyrat kernel: [    0.449012] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
Oct 30 08:14:45 woollyrat kernel: [    0.450176] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
Oct 30 08:14:45 woollyrat kernel: [    0.454768] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
Oct 30 08:14:45 woollyrat kernel: [    0.455373] TCP: Hash tables configured (established 524288 bind 65536)
Oct 30 08:14:45 woollyrat kernel: [    0.455375] TCP reno registered
Oct 30 08:14:45 woollyrat kernel: [    0.455491] NET: Registered protocol family 1
Oct 30 08:14:45 woollyrat kernel: [    0.455554] Trying to unpack rootfs image as initramfs...
Oct 30 08:14:45 woollyrat kernel: [    0.501507] Switched to high resolution mode on CPU 1
Oct 30 08:14:45 woollyrat kernel: [    0.509995] Switched to high resolution mode on CPU 0
Oct 30 08:14:45 woollyrat kernel: [    0.626776] Freeing initrd memory: 7918k freed
Oct 30 08:14:45 woollyrat kernel: [    0.629726] Simple Boot Flag at 0x36 set to 0x1
Oct 30 08:14:45 woollyrat kernel: [    0.629903] Scanning for low memory corruption every 60 seconds
Oct 30 08:14:45 woollyrat kernel: [    0.630042] audit: initializing netlink socket (disabled)
Oct 30 08:14:45 woollyrat kernel: [    0.630057] type=2000 audit(1256890465.622:1): initialized
Oct 30 08:14:45 woollyrat kernel: [    0.638931] HugeTLB registered 2 MB page size, pre-allocated 0 pages
Oct 30 08:14:45 woollyrat kernel: [    0.640196] VFS: Disk quotas dquot_6.5.2
Oct 30 08:14:45 woollyrat kernel: [    0.640246] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
Oct 30 08:14:45 woollyrat kernel: [    0.640735] fuse init (API version 7.12)
Oct 30 08:14:45 woollyrat kernel: [    0.640806] msgmni has been set to 6029
Oct 30 08:14:45 woollyrat kernel: [    0.640978] alg: No test for stdrng (krng)
Oct 30 08:14:45 woollyrat kernel: [    0.640986] io scheduler noop registered
Oct 30 08:14:45 woollyrat kernel: [    0.640989] io scheduler anticipatory registered
Oct 30 08:14:45 woollyrat kernel: [    0.640991] io scheduler deadline registered
Oct 30 08:14:45 woollyrat kernel: [    0.641025] io scheduler cfq registered (default)
Oct 30 08:14:45 woollyrat kernel: [    0.641174] pci 0000:01:00.0: Boot video device
Oct 30 08:14:45 woollyrat kernel: [    0.641300]   alloc irq_desc for 24 on node 0
Oct 30 08:14:45 woollyrat kernel: [    0.641302]   alloc kstat_irqs on node 0
Oct 30 08:14:45 woollyrat kernel: [    0.641310] pcieport-driver 0000:00:01.0: irq 24 for MSI/MSI-X
Oct 30 08:14:45 woollyrat kernel: [    0.641316] pcieport-driver 0000:00:01.0: setting latency timer to 64
Oct 30 08:14:45 woollyrat kernel: [    0.641451]   alloc irq_desc for 25 on node 0
Oct 30 08:14:45 woollyrat kernel: [    0.641452]   alloc kstat_irqs on node 0
Oct 30 08:14:45 woollyrat kernel: [    0.641461] pcieport-driver 0000:00:1c.0: irq 25 for MSI/MSI-X
Oct 30 08:14:45 woollyrat kernel: [    0.641471] pcieport-driver 0000:00:1c.0: setting latency timer to 64
Oct 30 08:14:45 woollyrat kernel: [    0.641631]   alloc irq_desc for 26 on node 0
Oct 30 08:14:45 woollyrat kernel: [    0.641633]   alloc kstat_irqs on node 0
Oct 30 08:14:45 woollyrat kernel: [    0.641641] pcieport-driver 0000:00:1c.1: irq 26 for MSI/MSI-X
Oct 30 08:14:45 woollyrat kernel: [    0.641651] pcieport-driver 0000:00:1c.1: setting latency timer to 64
Oct 30 08:14:45 woollyrat kernel: [    0.641806]   alloc irq_desc for 27 on node 0
Oct 30 08:14:45 woollyrat kernel: [    0.641808]   alloc kstat_irqs on node 0
Oct 30 08:14:45 woollyrat kernel: [    0.641815] pcieport-driver 0000:00:1c.3: irq 27 for MSI/MSI-X
Oct 30 08:14:45 woollyrat kernel: [    0.641826] pcieport-driver 0000:00:1c.3: setting latency timer to 64
Oct 30 08:14:45 woollyrat kernel: [    0.641981]   alloc irq_desc for 28 on node 0
Oct 30 08:14:45 woollyrat kernel: [    0.641983]   alloc kstat_irqs on node 0
Oct 30 08:14:45 woollyrat kernel: [    0.641991] pcieport-driver 0000:00:1c.5: irq 28 for MSI/MSI-X
Oct 30 08:14:45 woollyrat kernel: [    0.642001] pcieport-driver 0000:00:1c.5: setting latency timer to 64
Oct 30 08:14:45 woollyrat kernel: [    0.642100] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
Oct 30 08:14:45 woollyrat kernel: [    0.642260] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
Oct 30 08:14:45 woollyrat kernel: [    0.740065] ACPI: AC Adapter [ADP1] (on-line)
Oct 30 08:14:45 woollyrat kernel: [    0.740117] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
Oct 30 08:14:45 woollyrat kernel: [    0.740120] ACPI: Power Button [PWRF]
Oct 30 08:14:45 woollyrat kernel: [    0.740169] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
Oct 30 08:14:45 woollyrat kernel: [    0.740171] ACPI: Power Button [PWRB]
Oct 30 08:14:45 woollyrat kernel: [    0.740208] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2
Oct 30 08:14:45 woollyrat kernel: [    0.740210] ACPI: Sleep Button [SLPB]
Oct 30 08:14:45 woollyrat kernel: [    0.740244] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input3
Oct 30 08:14:45 woollyrat kernel: [    0.741095] ACPI: Lid Switch [LID0]
Oct 30 08:14:45 woollyrat kernel: [    0.741878] ACPI: SSDT 00000000bfd1ac20 00265 (v01  PmRef  Cpu0Ist 00003000 INTL 20050624)
Oct 30 08:14:45 woollyrat kernel: [    0.742330] ACPI: SSDT 00000000bfd18620 00575 (v01  PmRef  Cpu0Cst 00003001 INTL 20050624)
Oct 30 08:14:45 woollyrat kernel: [    0.748461] Monitor-Mwait will be used to enter C-1 state
Oct 30 08:14:45 woollyrat kernel: [    0.748484] Monitor-Mwait will be used to enter C-2 state
Oct 30 08:14:45 woollyrat kernel: [    0.748502] Monitor-Mwait will be used to enter C-3 state
Oct 30 08:14:45 woollyrat kernel: [    0.748509] Marking TSC unstable due to TSC halts in idle
Oct 30 08:14:45 woollyrat kernel: [    0.748526] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
Oct 30 08:14:45 woollyrat kernel: [    0.748550] processor LNXCPU:00: registered as cooling_device0
Oct 30 08:14:45 woollyrat kernel: [    0.748553] ACPI: Processor [CPU0] (supports 8 throttling states)
Oct 30 08:14:45 woollyrat kernel: [    0.748971] ACPI: SSDT 00000000bfd19ca0 001CF (v01  PmRef    ApIst 00003000 INTL 20050624)
Oct 30 08:14:45 woollyrat kernel: [    0.749322] ACPI: SSDT 00000000bfd19f20 0008D (v01  PmRef    ApCst 00003000 INTL 20050624)
Oct 30 08:14:45 woollyrat kernel: [    0.754352] ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3])
Oct 30 08:14:45 woollyrat kernel: [    0.754368] processor LNXCPU:01: registered as cooling_device1
Oct 30 08:14:45 woollyrat kernel: [    0.754374] ACPI: Processor [CPU1] (supports 8 throttling states)
Oct 30 08:14:45 woollyrat kernel: [    0.758662] thermal LNXTHERM:01: registered as thermal_zone0
Oct 30 08:14:45 woollyrat kernel: [    0.758670] ACPI: Thermal Zone [TZ00] (52 C)
Oct 30 08:14:45 woollyrat kernel: [    0.760562] thermal LNXTHERM:02: registered as thermal_zone1
Oct 30 08:14:45 woollyrat kernel: [    0.760568] ACPI: Thermal Zone [TZ01] (39 C)
Oct 30 08:14:45 woollyrat kernel: [    0.766196] thermal LNXTHERM:03: registered as thermal_zone2
Oct 30 08:14:45 woollyrat kernel: [    0.766203] ACPI: Thermal Zone [TZ02] (43 C)
Oct 30 08:14:45 woollyrat kernel: [    0.767200] Linux agpgart interface v0.103
Oct 30 08:14:45 woollyrat kernel: [    0.767208] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
Oct 30 08:14:45 woollyrat kernel: [    0.768222] brd: module loaded
Oct 30 08:14:45 woollyrat kernel: [    0.768603] loop: module loaded
Oct 30 08:14:45 woollyrat kernel: [    0.768663] input: Macintosh mouse button emulation as /devices/virtual/input/input4
Oct 30 08:14:45 woollyrat kernel: [    0.768756] ahci 0000:00:1f.2: version 3.0
Oct 30 08:14:45 woollyrat kernel: [    0.768768] ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
Oct 30 08:14:45 woollyrat kernel: [    0.768800]   alloc irq_desc for 29 on node 0
Oct 30 08:14:45 woollyrat kernel: [    0.768802]   alloc kstat_irqs on node 0
Oct 30 08:14:45 woollyrat kernel: [    0.768811] ahci 0000:00:1f.2: irq 29 for MSI/MSI-X
Oct 30 08:14:45 woollyrat kernel: [    0.768884] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 4 ports 3 Gbps 0x33 impl SATA mode
Oct 30 08:14:45 woollyrat kernel: [    0.768887] ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pmp pio slum part 
Oct 30 08:14:45 woollyrat kernel: [    0.768892] ahci 0000:00:1f.2: setting latency timer to 64
Oct 30 08:14:45 woollyrat kernel: [    0.769187] scsi0 : ahci
Oct 30 08:14:45 woollyrat kernel: [    0.769267] scsi1 : ahci
Oct 30 08:14:45 woollyrat kernel: [    0.769316] scsi2 : ahci
Oct 30 08:14:45 woollyrat kernel: [    0.769365] scsi3 : ahci
Oct 30 08:14:45 woollyrat kernel: [    0.769411] scsi4 : ahci
Oct 30 08:14:45 woollyrat kernel: [    0.769461] scsi5 : ahci
Oct 30 08:14:45 woollyrat kernel: [    0.769502] ata1: SATA max UDMA/133 abar m2048@0xfc504000 port 0xfc504100 irq 29
Oct 30 08:14:45 woollyrat kernel: [    0.769506] ata2: SATA max UDMA/133 abar m2048@0xfc504000 port 0xfc504180 irq 29
Oct 30 08:14:45 woollyrat kernel: [    0.769507] ata3: DUMMY
Oct 30 08:14:45 woollyrat kernel: [    0.769508] ata4: DUMMY
Oct 30 08:14:45 woollyrat kernel: [    0.769513] ata5: SATA max UDMA/133 abar m2048@0xfc504000 port 0xfc504300 irq 29
Oct 30 08:14:45 woollyrat kernel: [    0.769516] ata6: SATA max UDMA/133 abar m2048@0xfc504000 port 0xfc504380 irq 29
Oct 30 08:14:45 woollyrat kernel: [    0.770279] Fixed MDIO Bus: probed
Oct 30 08:14:45 woollyrat kernel: [    0.770308] PPP generic driver version 2.4.2
Oct 30 08:14:45 woollyrat kernel: [    0.770421] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
Oct 30 08:14:45 woollyrat kernel: [    0.770539] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 19 (level, low) -> IRQ 19
Oct 30 08:14:45 woollyrat kernel: [    0.770549] ehci_hcd 0000:00:1a.7: setting latency timer to 64
Oct 30 08:14:45 woollyrat kernel: [    0.770552] ehci_hcd 0000:00:1a.7: EHCI Host Controller
Oct 30 08:14:45 woollyrat kernel: [    0.770598] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
Oct 30 08:14:45 woollyrat kernel: [    0.774510] ehci_hcd 0000:00:1a.7: debug port 1
Oct 30 08:14:45 woollyrat kernel: [    0.774516] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
Oct 30 08:14:45 woollyrat kernel: [    0.774529] ehci_hcd 0000:00:1a.7: irq 19, io mem 0xfc504800
Oct 30 08:14:45 woollyrat kernel: [    0.790035] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
Oct 30 08:14:45 woollyrat kernel: [    0.790094] usb usb1: configuration #1 chosen from 1 choice
Oct 30 08:14:45 woollyrat kernel: [    0.790118] hub 1-0:1.0: USB hub found
Oct 30 08:14:45 woollyrat kernel: [    0.790125] hub 1-0:1.0: 6 ports detected
Oct 30 08:14:45 woollyrat kernel: [    0.790259]   alloc irq_desc for 23 on node 0
Oct 30 08:14:45 woollyrat kernel: [    0.790261]   alloc kstat_irqs on node 0
Oct 30 08:14:45 woollyrat kernel: [    0.790265] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
Oct 30 08:14:45 woollyrat kernel: [    0.790274] ehci_hcd 0000:00:1d.7: setting latency timer to 64
Oct 30 08:14:45 woollyrat kernel: [    0.790277] ehci_hcd 0000:00:1d.7: EHCI Host Controller
Oct 30 08:14:45 woollyrat kernel: [    0.790307] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
Oct 30 08:14:45 woollyrat kernel: [    0.794221] ehci_hcd 0000:00:1d.7: debug port 1
Oct 30 08:14:45 woollyrat kernel: [    0.794227] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
Oct 30 08:14:45 woollyrat kernel: [    0.794280] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfc504c00
Oct 30 08:14:45 woollyrat kernel: [    0.808140] ACPI: Battery Slot [BAT0] (battery present)
Oct 30 08:14:45 woollyrat kernel: [    0.810017] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
Oct 30 08:14:45 woollyrat kernel: [    0.810074] usb usb2: configuration #1 chosen from 1 choice
Oct 30 08:14:45 woollyrat kernel: [    0.810098] hub 2-0:1.0: USB hub found
Oct 30 08:14:45 woollyrat kernel: [    0.810103] hub 2-0:1.0: 6 ports detected
Oct 30 08:14:45 woollyrat kernel: [    0.810162] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
Oct 30 08:14:45 woollyrat kernel: [    0.810181] uhci_hcd: USB Universal Host Controller Interface driver
Oct 30 08:14:45 woollyrat kernel: [    0.810249] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
Oct 30 08:14:45 woollyrat kernel: [    0.810255] uhci_hcd 0000:00:1a.0: setting latency timer to 64
Oct 30 08:14:45 woollyrat kernel: [    0.810258] uhci_hcd 0000:00:1a.0: UHCI Host Controller
Oct 30 08:14:45 woollyrat kernel: [    0.810284] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
Oct 30 08:14:45 woollyrat kernel: [    0.810317] uhci_hcd 0000:00:1a.0: irq 16, io base 0x00001800
Oct 30 08:14:45 woollyrat kernel: [    0.810383] usb usb3: configuration #1 chosen from 1 choice
Oct 30 08:14:45 woollyrat kernel: [    0.810410] hub 3-0:1.0: USB hub found
Oct 30 08:14:45 woollyrat kernel: [    0.810417] hub 3-0:1.0: 2 ports detected
Oct 30 08:14:45 woollyrat kernel: [    0.810487]   alloc irq_desc for 21 on node 0
Oct 30 08:14:45 woollyrat kernel: [    0.810489]   alloc kstat_irqs on node 0
Oct 30 08:14:45 woollyrat kernel: [    0.810493] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
Oct 30 08:14:45 woollyrat kernel: [    0.810498] uhci_hcd 0000:00:1a.1: setting latency timer to 64
Oct 30 08:14:45 woollyrat kernel: [    0.810501] uhci_hcd 0000:00:1a.1: UHCI Host Controller
Oct 30 08:14:45 woollyrat kernel: [    0.810530] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
Oct 30 08:14:45 woollyrat kernel: [    0.810563] uhci_hcd 0000:00:1a.1: irq 21, io base 0x00001820
Oct 30 08:14:45 woollyrat kernel: [    0.810629] usb usb4: configuration #1 chosen from 1 choice
Oct 30 08:14:45 woollyrat kernel: [    0.810652] hub 4-0:1.0: USB hub found
Oct 30 08:14:45 woollyrat kernel: [    0.810657] hub 4-0:1.0: 2 ports detected
Oct 30 08:14:45 woollyrat kernel: [    0.810724] uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 19 (level, low) -> IRQ 19
Oct 30 08:14:45 woollyrat kernel: [    0.810730] uhci_hcd 0000:00:1a.2: setting latency timer to 64
Oct 30 08:14:45 woollyrat kernel: [    0.810733] uhci_hcd 0000:00:1a.2: UHCI Host Controller
Oct 30 08:14:45 woollyrat kernel: [    0.810757] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
Oct 30 08:14:45 woollyrat kernel: [    0.810782] uhci_hcd 0000:00:1a.2: irq 19, io base 0x00001840
Oct 30 08:14:45 woollyrat kernel: [    0.810849] usb usb5: configuration #1 chosen from 1 choice
Oct 30 08:14:45 woollyrat kernel: [    0.810870] hub 5-0:1.0: USB hub found
Oct 30 08:14:45 woollyrat kernel: [    0.810875] hub 5-0:1.0: 2 ports detected
Oct 30 08:14:45 woollyrat kernel: [    0.810943] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
Oct 30 08:14:45 woollyrat kernel: [    0.810948] uhci_hcd 0000:00:1d.0: setting latency timer to 64
Oct 30 08:14:45 woollyrat kernel: [    0.810951] uhci_hcd 0000:00:1d.0: UHCI Host Controller
Oct 30 08:14:45 woollyrat kernel: [    0.810976] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
Oct 30 08:14:45 woollyrat kernel: [    0.811001] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001860
Oct 30 08:14:45 woollyrat kernel: [    0.811068] usb usb6: configuration #1 chosen from 1 choice
Oct 30 08:14:45 woollyrat kernel: [    0.811089] hub 6-0:1.0: USB hub found
Oct 30 08:14:45 woollyrat kernel: [    0.811094] hub 6-0:1.0: 2 ports detected
Oct 30 08:14:45 woollyrat kernel: [    0.811163] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
Oct 30 08:14:45 woollyrat kernel: [    0.811169] uhci_hcd 0000:00:1d.1: setting latency timer to 64
Oct 30 08:14:45 woollyrat kernel: [    0.811173] uhci_hcd 0000:00:1d.1: UHCI Host Controller
Oct 30 08:14:45 woollyrat kernel: [    0.811201] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
Oct 30 08:14:45 woollyrat kernel: [    0.811227] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00001880
Oct 30 08:14:45 woollyrat kernel: [    0.811290] usb usb7: configuration #1 chosen from 1 choice
Oct 30 08:14:45 woollyrat kernel: [    0.811313] hub 7-0:1.0: USB hub found
Oct 30 08:14:45 woollyrat kernel: [    0.811318] hub 7-0:1.0: 2 ports detected
Oct 30 08:14:45 woollyrat kernel: [    0.811380]   alloc irq_desc for 18 on node 0
Oct 30 08:14:45 woollyrat kernel: [    0.811382]   alloc kstat_irqs on node 0
Oct 30 08:14:45 woollyrat kernel: [    0.811385] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
Oct 30 08:14:45 woollyrat kernel: [    0.811391] uhci_hcd 0000:00:1d.2: setting latency timer to 64
Oct 30 08:14:45 woollyrat kernel: [    0.811394] uhci_hcd 0000:00:1d.2: UHCI Host Controller
Oct 30 08:14:45 woollyrat kernel: [    0.811419] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
Oct 30 08:14:45 woollyrat kernel: [    0.811451] uhci_hcd 0000:00:1d.2: irq 18, io base 0x000018a0
Oct 30 08:14:45 woollyrat kernel: [    0.811519] usb usb8: configuration #1 chosen from 1 choice
Oct 30 08:14:45 woollyrat kernel: [    0.811540] hub 8-0:1.0: USB hub found
Oct 30 08:14:45 woollyrat kernel: [    0.811546] hub 8-0:1.0: 2 ports detected
Oct 30 08:14:45 woollyrat kernel: [    0.811632] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
Oct 30 08:14:45 woollyrat kernel: [    0.831481] serio: i8042 KBD port at 0x60,0x64 irq 1
Oct 30 08:14:45 woollyrat kernel: [    0.831486] serio: i8042 AUX port at 0x60,0x64 irq 12
Oct 30 08:14:45 woollyrat kernel: [    0.831533] mice: PS/2 mouse device common for all mice
Oct 30 08:14:45 woollyrat kernel: [    0.831636] rtc_cmos 00:06: RTC can wake from S4
Oct 30 08:14:45 woollyrat kernel: [    0.831669] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
Oct 30 08:14:45 woollyrat kernel: [    0.831697] rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
Oct 30 08:14:45 woollyrat kernel: [    0.831775] device-mapper: uevent: version 1.0.3
Oct 30 08:14:45 woollyrat kernel: [    0.831864] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com
Oct 30 08:14:45 woollyrat kernel: [    0.831931] device-mapper: multipath: version 1.1.0 loaded
Oct 30 08:14:45 woollyrat kernel: [    0.831934] device-mapper: multipath round-robin: version 1.0.0 loaded
Oct 30 08:14:45 woollyrat kernel: [    0.832176] cpuidle: using governor ladder
Oct 30 08:14:45 woollyrat kernel: [    0.832273] cpuidle: using governor menu
Oct 30 08:14:45 woollyrat kernel: [    0.832617] TCP cubic registered
Oct 30 08:14:45 woollyrat kernel: [    0.832726] NET: Registered protocol family 10
Oct 30 08:14:45 woollyrat kernel: [    0.833090] lo: Disabled Privacy Extensions
Oct 30 08:14:45 woollyrat kernel: [    0.833459] NET: Registered protocol family 17
Oct 30 08:14:45 woollyrat kernel: [    0.833474] Bluetooth: L2CAP ver 2.13
Oct 30 08:14:45 woollyrat kernel: [    0.833476] Bluetooth: L2CAP socket layer initialized
Oct 30 08:14:45 woollyrat kernel: [    0.833479] Bluetooth: SCO (Voice Link) ver 0.6
Oct 30 08:14:45 woollyrat kernel: [    0.833481] Bluetooth: SCO socket layer initialized
Oct 30 08:14:45 woollyrat kernel: [    0.833517] Bluetooth: RFCOMM TTY layer initialized
Oct 30 08:14:45 woollyrat kernel: [    0.833520] Bluetooth: RFCOMM socket layer initialized
Oct 30 08:14:45 woollyrat kernel: [    0.833522] Bluetooth: RFCOMM ver 1.11
Oct 30 08:14:45 woollyrat kernel: [    0.838169] PM: Resume from disk failed.
Oct 30 08:14:45 woollyrat kernel: [    0.838180] registered taskstats version 1
Oct 30 08:14:45 woollyrat kernel: [    0.838293]   Magic number: 13:294:221
Oct 30 08:14:45 woollyrat kernel: [    0.838389] rtc_cmos 00:06: setting system clock to 2009-10-30 08:14:28 UTC (1256890468)
Oct 30 08:14:45 woollyrat kernel: [    0.838392] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
Oct 30 08:14:45 woollyrat kernel: [    0.838393] EDD information not available.
Oct 30 08:14:45 woollyrat kernel: [    0.849821] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input5
Oct 30 08:14:45 woollyrat kernel: [    1.000036] Clocksource tsc unstable (delta = -143567013 ns)
Oct 30 08:14:45 woollyrat kernel: [    1.110083] usb 1-6: new high speed USB device using ehci_hcd and address 2
Oct 30 08:14:45 woollyrat kernel: [    1.122590] ata5: SATA link down (SStatus 0 SControl 300)
Oct 30 08:14:45 woollyrat kernel: [    1.122611] ata6: SATA link down (SStatus 0 SControl 300)
Oct 30 08:14:45 woollyrat kernel: [    1.300051] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
Oct 30 08:14:45 woollyrat kernel: [    1.300070] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
Oct 30 08:14:45 woollyrat kernel: [    1.302299] ata1.00: ATA-8: ST9500420ASG, 0002SDM1, max UDMA/133
Oct 30 08:14:45 woollyrat kernel: [    1.302302] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32)
Oct 30 08:14:45 woollyrat kernel: [    1.304127] ata2.00: ATAPI: HL-DT-ST DVD+/-RW GA10N, A105, max UDMA/133
Oct 30 08:14:45 woollyrat kernel: [    1.305107] ata1.00: configured for UDMA/133
Oct 30 08:14:45 woollyrat kernel: [    1.308989] ata2.00: configured for UDMA/133
Oct 30 08:14:45 woollyrat kernel: [    1.320170] scsi 0:0:0:0: Direct-Access     ATA      ST9500420ASG     0002 PQ: 0 ANSI: 5
Oct 30 08:14:45 woollyrat kernel: [    1.320290] sd 0:0:0:0: Attached scsi generic sg0 type 0
Oct 30 08:14:45 woollyrat kernel: [    1.320319] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
Oct 30 08:14:45 woollyrat kernel: [    1.320357] sd 0:0:0:0: [sda] Write Protect is off
Oct 30 08:14:45 woollyrat kernel: [    1.320359] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
Oct 30 08:14:45 woollyrat kernel: [    1.320380] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Oct 30 08:14:45 woollyrat kernel: [    1.320483]  sda:
Oct 30 08:14:45 woollyrat kernel: [    1.332062] scsi 1:0:0:0: CD-ROM            HL-DT-ST DVD+-RW GA10N    A105 PQ: 0 ANSI: 5
Oct 30 08:14:45 woollyrat kernel: [    1.342284] usb 1-6: configuration #1 chosen from 1 choice
Oct 30 08:14:45 woollyrat kernel: [    1.343367] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda caddy
Oct 30 08:14:45 woollyrat kernel: [    1.343370] Uniform CD-ROM driver Revision: 3.20
Oct 30 08:14:45 woollyrat kernel: [    1.343455] sr 1:0:0:0: Attached scsi CD-ROM sr0
Oct 30 08:14:45 woollyrat kernel: [    1.343498] sr 1:0:0:0: Attached scsi generic sg1 type 5
Oct 30 08:14:45 woollyrat kernel: [    1.343655]  sda1 sda2 < sda5 >
Oct 30 08:14:45 woollyrat kernel: [    1.375245] sd 0:0:0:0: [sda] Attached SCSI disk
Oct 30 08:14:45 woollyrat kernel: [    1.375284] Freeing unused kernel memory: 660k freed
Oct 30 08:14:45 woollyrat kernel: [    1.375466] Write protecting the kernel read-only data: 7580k
Oct 30 08:14:45 woollyrat kernel: [    1.468684] usb 2-3: new high speed USB device using ehci_hcd and address 2
Oct 30 08:14:45 woollyrat kernel: [    1.477988] ohci1394 0000:09:01.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
Oct 30 08:14:45 woollyrat kernel: [    1.485983] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:01/device:02/input/input6
Oct 30 08:14:45 woollyrat kernel: [    1.486030] ACPI: Video Device [M86] (multi-head: yes  rom: no  post: no)
Oct 30 08:14:45 woollyrat kernel: [    1.524977] tg3.c:v3.99 (April 20, 2009)
Oct 30 08:14:45 woollyrat kernel: [    1.525150] tg3 0000:08:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
Oct 30 08:14:45 woollyrat kernel: [    1.525162] tg3 0000:08:00.0: setting latency timer to 64
Oct 30 08:14:45 woollyrat kernel: [    1.532984] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[17]  MMIO=[fc200000-fc2007ff]  Max Packet=[2048]  IR/IT contexts=[4/4]
Oct 30 08:14:45 woollyrat kernel: [    1.540669] tg3 0000:08:00.0: PME# disabled
Oct 30 08:14:45 woollyrat kernel: [    1.611679] usb 2-3: configuration #1 chosen from 1 choice
Oct 30 08:14:45 woollyrat kernel: [    1.611993] hub 2-3:1.0: USB hub found
Oct 30 08:14:45 woollyrat kernel: [    1.612820] hub 2-3:1.0: 4 ports detected
Oct 30 08:14:45 woollyrat kernel: [    1.890352] usb 2-3.3: new low speed USB device using ehci_hcd and address 3
Oct 30 08:14:45 woollyrat kernel: [    2.005038] usb 2-3.3: configuration #1 chosen from 1 choice
Oct 30 08:14:45 woollyrat kernel: [    2.009781] usbcore: registered new interface driver hiddev
Oct 30 08:14:45 woollyrat kernel: [    2.013730] input: Logitech Trackball as /devices/pci0000:00/0000:00:1d.7/usb2/2-3/2-3.3/2-3.3:1.0/input/input7
Oct 30 08:14:45 woollyrat kernel: [    2.013790] generic-usb 0003:046D:C404.0001: input,hidraw0: USB HID v1.10 Mouse [Logitech Trackball] on usb-0000:00:1d.7-3.3/input0
Oct 30 08:14:45 woollyrat kernel: [    2.013802] usbcore: registered new interface driver usbhid
Oct 30 08:14:45 woollyrat kernel: [    2.013804] usbhid: v2.6:USB HID core driver
Oct 30 08:14:45 woollyrat kernel: [    2.082849] usb 2-3.4: new full speed USB device using ehci_hcd and address 4
Oct 30 08:14:45 woollyrat kernel: [    2.200537] usb 2-3.4: configuration #1 chosen from 1 choice
Oct 30 08:14:45 woollyrat kernel: [    2.201496] input: Burr-Brown from TI               USB Audio CODEC  as /devices/pci0000:00/0000:00:1d.7/usb2/2-3/2-3.4/2-3.4:1.3/input/input8
Oct 30 08:14:45 woollyrat kernel: [    2.201555] generic-usb 0003:08BB:2902.0002: input,hidraw1: USB HID v1.00 Device [Burr-Brown from TI               USB Audio CODEC ] on usb-0000:00:1d.7-3.4/input3
Oct 30 08:14:45 woollyrat kernel: [    2.851633] eth0: Tigon3 [partno(BCM95784M) rev 5784100] (PCI Express) MAC address 00:22:19:e9:17:40
Oct 30 08:14:45 woollyrat kernel: [    2.851636] eth0: attached PHY is 5784 (10/100/1000Base-T Ethernet) (WireSpeed[1])
Oct 30 08:14:45 woollyrat kernel: [    2.851638] eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
Oct 30 08:14:45 woollyrat kernel: [    2.851640] eth0: dma_rwctrl[76180000] dma_mask[64-bit]
Oct 30 08:14:45 woollyrat kernel: [    2.852231] ieee1394: Host added: ID:BUS[0-00:1023]  GUID[0000000000000000]
Oct 30 08:14:45 woollyrat kernel: [    3.289914] xor: automatically using best checksumming function: generic_sse
Oct 30 08:14:45 woollyrat kernel: [    3.330007]    generic_sse:  9087.200 MB/sec
Oct 30 08:14:45 woollyrat kernel: [    3.330009] xor: using function: generic_sse (9087.200 MB/sec)
Oct 30 08:14:45 woollyrat kernel: [    3.344379] device-mapper: dm-raid45: initialized v0.2594b
Oct 30 08:14:45 woollyrat kernel: [    3.486719] PM: Starting manual resume from disk
Oct 30 08:14:45 woollyrat kernel: [    3.486723] PM: Resume from partition 8:5
Oct 30 08:14:45 woollyrat kernel: [    3.486724] PM: Checking hibernation image.
Oct 30 08:14:45 woollyrat kernel: [    3.487045] PM: Resume from disk failed.
Oct 30 08:14:45 woollyrat kernel: [    3.553415] kjournald starting.  Commit interval 5 seconds
Oct 30 08:14:45 woollyrat kernel: [    3.553448] EXT3-fs: mounted filesystem with writeback data mode.
Oct 30 08:14:45 woollyrat kernel: [    4.396584] type=1505 audit(1256890472.054:2): operation="profile_load" pid=489 name=/usr/share/gdm/guest-session/Xsession
Oct 30 08:14:45 woollyrat kernel: [    4.497678] type=1505 audit(1256890472.154:3): operation="profile_load" pid=490 name=/sbin/dhclient3
Oct 30 08:14:45 woollyrat kernel: [    4.497718] type=1505 audit(1256890472.154:4): operation="profile_load" pid=490 name=/usr/lib/NetworkManager/nm-dhcp-client.action
Oct 30 08:14:45 woollyrat kernel: [    4.497751] type=1505 audit(1256890472.154:5): operation="profile_load" pid=490 name=/usr/lib/connman/scripts/dhclient-script
Oct 30 08:14:45 woollyrat kernel: [   10.732067] type=1505 audit(1256890478.384:6): operation="profile_load" pid=491 name=/usr/bin/evince
Oct 30 08:14:45 woollyrat kernel: [   10.732438] type=1505 audit(1256890478.384:7): operation="profile_load" pid=491 name=/usr/bin/evince-previewer
Oct 30 08:14:45 woollyrat kernel: [   10.732809] type=1505 audit(1256890478.394:8): operation="profile_load" pid=491 name=/usr/bin/evince-thumbnailer
Oct 30 08:14:45 woollyrat kernel: [   10.889371] type=1505 audit(1256890478.544:9): operation="profile_load" pid=493 name=/usr/lib/cups/backend/cups-pdf
Oct 30 08:14:45 woollyrat kernel: [   10.889466] type=1505 audit(1256890478.544:10): operation="profile_load" pid=493 name=/usr/sbin/cupsd
Oct 30 08:14:45 woollyrat kernel: [   10.935068] type=1505 audit(1256890478.594:11): operation="profile_load" pid=494 name=/usr/sbin/tcpdump
Oct 30 08:14:45 woollyrat kernel: [   11.965610] Adding 8932100k swap on /dev/sda5.  Priority:-1 extents:1 across:8932100k 
Oct 30 08:14:45 woollyrat kernel: [   12.362016] udev: starting version 147
Oct 30 08:14:45 woollyrat kernel: [   12.477592] EXT3 FS on sda1, internal journal
Oct 30 08:14:45 woollyrat kernel: [   13.072273] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
Oct 30 08:14:45 woollyrat kernel: [   13.135954] lp: driver loaded but no devices found
Oct 30 08:14:45 woollyrat kernel: [   13.343520] input: Dell WMI hotkeys as /devices/virtual/input/input9
Oct 30 08:14:45 woollyrat kernel: [   13.409651] lib80211: common routines for IEEE802.11 drivers
Oct 30 08:14:45 woollyrat kernel: [   13.409654] lib80211_crypt: registered algorithm 'NULL'
Oct 30 08:14:45 woollyrat kernel: [   13.530545] sdhci: Secure Digital Host Controller Interface driver
Oct 30 08:14:45 woollyrat kernel: [   13.530548] sdhci: Copyright(c) Pierre Ossman
Oct 30 08:14:45 woollyrat kernel: [   13.560899] Linux video capture interface: v2.00
Oct 30 08:14:45 woollyrat kernel: [   13.731643] input: PS/2 Mouse as /devices/platform/i8042/serio1/input/input10
Oct 30 08:14:45 woollyrat kernel: [   13.754538] input: AlpsPS/2 ALPS GlidePoint as /devices/platform/i8042/serio1/input/input11
Oct 30 08:14:45 woollyrat kernel: [   14.589834] fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
Oct 30 08:14:45 woollyrat kernel: [   14.589839] Disabling lock debugging due to kernel taint
Oct 30 08:14:45 woollyrat kernel: [   14.603373] [fglrx] Maximum main memory to use for locked dma buffers: 2870 MBytes.
Oct 30 08:14:45 woollyrat kernel: [   14.603630] [fglrx]   vendor: 1002 device: 9591 count: 1
Oct 30 08:14:45 woollyrat kernel: [   14.604006] [fglrx] ioport: bar 1, base 0x2000, size: 0x100
Oct 30 08:14:45 woollyrat kernel: [   14.604022] pci 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
Oct 30 08:14:45 woollyrat kernel: [   14.604027] pci 0000:01:00.0: setting latency timer to 64
Oct 30 08:14:45 woollyrat kernel: [   14.604205] [fglrx] Kernel PAT support is enabled
Oct 30 08:14:45 woollyrat kernel: [   14.604228] [fglrx] module loaded - fglrx 8.66.10 [Sep  3 2009] with 1 minors
Oct 30 08:14:45 woollyrat kernel: [   15.246325] wl 0000:04:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
Oct 30 08:14:45 woollyrat kernel: [   15.246339] wl 0000:04:00.0: setting latency timer to 64
Oct 30 08:14:45 woollyrat kernel: [   15.389195] ip_tables: (C) 2000-2006 Netfilter Core Team
Oct 30 08:14:45 woollyrat kernel: [   15.391547] sdhci-pci 0000:09:01.1: SDHCI controller found [1180:0822] (rev 22)
Oct 30 08:14:45 woollyrat kernel: [   15.391564] sdhci-pci 0000:09:01.1: PCI INT B -> GSI 18 (level, low) -> IRQ 18
Oct 30 08:14:45 woollyrat kernel: [   15.393624] Registered led device: mmc0::
Oct 30 08:14:45 woollyrat kernel: [   15.394668] mmc0: SDHCI controller on PCI [0000:09:01.1] using DMA
Oct 30 08:14:45 woollyrat kernel: [   15.413932] uvcvideo: Found UVC 1.00 device Laptop_Integrated_Webcam_2M (0c45:63fb)
Oct 30 08:14:45 woollyrat kernel: [   15.423099] input: Laptop_Integrated_Webcam_2M as /devices/pci0000:00/0000:00:1a.7/usb1/1-6/1-6:1.0/input/input12
Oct 30 08:14:45 woollyrat kernel: [   15.423150] usbcore: registered new interface driver uvcvideo
Oct 30 08:14:45 woollyrat kernel: [   15.423153] USB Video Class driver (v0.1.0)
Oct 30 08:14:45 woollyrat kernel: [   15.463411] lib80211_crypt: registered algorithm 'TKIP'
Oct 30 08:14:45 woollyrat kernel: [   15.463739] eth1: Broadcom BCM4315 802.11 Wireless Controller 5.10.91.9
Oct 30 08:14:45 woollyrat kernel: [   15.710563]   alloc irq_desc for 22 on node 0
Oct 30 08:14:45 woollyrat kernel: [   15.710567]   alloc kstat_irqs on node 0
Oct 30 08:14:45 woollyrat kernel: [   15.710573] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
Oct 30 08:14:45 woollyrat kernel: [   15.710605] HDA Intel 0000:00:1b.0: setting latency timer to 64
Oct 30 08:14:45 woollyrat kernel: [   15.740143] usbcore: registered new interface driver snd-usb-audio
Oct 30 08:14:45 woollyrat kernel: [   15.846024] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input13
Oct 30 08:14:45 woollyrat kernel: [   15.861560] input: HDA Intel Mic at Ext Left Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14
Oct 30 08:14:45 woollyrat kernel: [   15.861620] input: HDA Intel HP Out at Ext Left Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input15
Oct 30 08:14:45 woollyrat kernel: [   15.861668] input: HDA Intel HP Out at Ext Left Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input16
Oct 30 08:14:45 woollyrat kernel: [   15.862254] HDA Intel 0000:01:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
Oct 30 08:14:45 woollyrat kernel: [   15.862285] HDA Intel 0000:01:00.1: setting latency timer to 64
Oct 30 08:14:47 woollyrat kernel: [   19.829857] type=1505 audit(1256890487.481:12): operation="profile_replace" pid=1165 name=/usr/share/gdm/guest-session/Xsession
Oct 30 08:14:47 woollyrat kernel: [   19.922082] type=1505 audit(1256890487.581:13): operation="profile_replace" pid=1166 name=/sbin/dhclient3
Oct 30 08:14:47 woollyrat kernel: [   19.922181] type=1505 audit(1256890487.581:14): operation="profile_replace" pid=1166 name=/usr/lib/NetworkManager/nm-dhcp-client.action
Oct 30 08:14:47 woollyrat kernel: [   19.922238] type=1505 audit(1256890487.581:15): operation="profile_replace" pid=1166 name=/usr/lib/connman/scripts/dhclient-script
Oct 30 08:14:48 woollyrat kernel: [   20.581719] usplash:418 freeing invalid memtype ffffffffd0000000-ffffffffd1000000
Oct 30 08:14:48 woollyrat NetworkManager: <info>  starting...
Oct 30 08:14:48 woollyrat NetworkManager: <info>  Trying to start the modem-manager...
Oct 30 08:14:48 woollyrat modem-manager: Loaded plugin Novatel
Oct 30 08:14:48 woollyrat modem-manager: Loaded plugin Option High-Speed
Oct 30 08:14:48 woollyrat modem-manager: Loaded plugin Ericsson MBM
Oct 30 08:14:48 woollyrat modem-manager: Loaded plugin Sierra
Oct 30 08:14:48 woollyrat modem-manager: Loaded plugin Option
Oct 30 08:14:48 woollyrat modem-manager: Loaded plugin MotoC
Oct 30 08:14:48 woollyrat modem-manager: Loaded plugin ZTE
Oct 30 08:14:48 woollyrat modem-manager: Loaded plugin Generic
Oct 30 08:14:48 woollyrat modem-manager: Loaded plugin Nokia
Oct 30 08:14:48 woollyrat modem-manager: Loaded plugin Huawei
Oct 30 08:14:48 woollyrat modem-manager: Loaded plugin Gobi
Oct 30 08:14:48 woollyrat NetworkManager:    SCPlugin-Ifupdown: init!
Oct 30 08:14:48 woollyrat NetworkManager:    SCPlugin-Ifupdown: update_system_hostname
Oct 30 08:14:48 woollyrat NetworkManager:    SCPluginIfupdown: management mode: unmanaged
Oct 30 08:14:48 woollyrat NetworkManager:    SCPlugin-Ifupdown: devices added (path: /sys/devices/pci0000:00/0000:00:1c.1/0000:04:00.0/net/eth1, iface: eth1)
Oct 30 08:14:48 woollyrat NetworkManager:    SCPlugin-Ifupdown: device added (path: /sys/devices/pci0000:00/0000:00:1c.1/0000:04:00.0/net/eth1, iface: eth1): no ifupdown configuration found.
Oct 30 08:14:48 woollyrat NetworkManager:    SCPlugin-Ifupdown: devices added (path: /sys/devices/pci0000:00/0000:00:1c.5/0000:08:00.0/net/eth0, iface: eth0)
Oct 30 08:14:48 woollyrat NetworkManager:    SCPlugin-Ifupdown: device added (path: /sys/devices/pci0000:00/0000:00:1c.5/0000:08:00.0/net/eth0, iface: eth0): no ifupdown configuration found.
Oct 30 08:14:48 woollyrat NetworkManager:    SCPlugin-Ifupdown: devices added (path: /sys/devices/virtual/net/lo, iface: lo)
Oct 30 08:14:48 woollyrat NetworkManager:    SCPlugin-Ifupdown: device added (path: /sys/devices/virtual/net/lo, iface: lo): no ifupdown configuration found.
Oct 30 08:14:48 woollyrat NetworkManager:    SCPlugin-Ifupdown: end _init.
Oct 30 08:14:48 woollyrat NetworkManager: Loaded plugin ifupdown: (C) 2008 Canonical Ltd.  To report bugs please use the NetworkManager mailing list.
Oct 30 08:14:48 woollyrat NetworkManager: Loaded plugin keyfile: (c) 2007 - 2008 Red Hat, Inc.  To report bugs please use the NetworkManager mailing list.
Oct 30 08:14:48 woollyrat NetworkManager: <info>  Found radio killswitch rfkill0 (at /sys/devices/virtual/rfkill/rfkill0) (driver <unknown>)
Oct 30 08:14:48 woollyrat NetworkManager: <info>  Wireless now enabled by radio killswitch
Oct 30 08:14:48 woollyrat NetworkManager:    SCPlugin-Ifupdown: (12159072) ... get_connections.
Oct 30 08:14:48 woollyrat NetworkManager:    SCPlugin-Ifupdown: (12159072) ... get_connections (managed=false): return empty list.
Oct 30 08:14:49 woollyrat NetworkManager:    Ifupdown: get unmanaged devices count: 0
Oct 30 08:14:49 woollyrat NetworkManager: <info>  (eth1): driver supports SSID scans (scan_capa 0x01).
Oct 30 08:14:49 woollyrat NetworkManager: <info>  (eth1): new 802.11 WiFi device (driver: 'wl')
Oct 30 08:14:49 woollyrat NetworkManager: <info>  (eth1): exported as /org/freedesktop/NetworkManager/Devices/0
Oct 30 08:14:49 woollyrat NetworkManager: <info>  (eth1): now managed
Oct 30 08:14:49 woollyrat NetworkManager: <info>  (eth1): device state change: 1 -> 2 (reason 2)
Oct 30 08:14:49 woollyrat NetworkManager: <info>  (eth1): preparing device.
Oct 30 08:14:49 woollyrat NetworkManager: <info>  (eth1): deactivating device (reason: 2).
Oct 30 08:14:49 woollyrat NetworkManager: supplicant_interface_acquire: assertion `mgr_state == NM_SUPPLICANT_MANAGER_STATE_IDLE' failed
Oct 30 08:14:49 woollyrat NetworkManager: <info>  (eth0): carrier is OFF
Oct 30 08:14:49 woollyrat NetworkManager: <info>  (eth0): new Ethernet device (driver: 'tg3')
Oct 30 08:14:49 woollyrat NetworkManager: <info>  (eth0): exported as /org/freedesktop/NetworkManager/Devices/1
Oct 30 08:14:49 woollyrat NetworkManager: <info>  (eth0): now managed
Oct 30 08:14:49 woollyrat NetworkManager: <info>  (eth0): device state change: 1 -> 2 (reason 2)
Oct 30 08:14:49 woollyrat NetworkManager: <info>  (eth0): bringing up device.
Oct 30 08:14:49 woollyrat kernel: [   21.881034] tg3 0000:08:00.0: PME# disabled
Oct 30 08:14:49 woollyrat kernel: [   21.881365]   alloc irq_desc for 30 on node 0
Oct 30 08:14:49 woollyrat kernel: [   21.881368]   alloc kstat_irqs on node 0
Oct 30 08:14:49 woollyrat kernel: [   21.881387] tg3 0000:08:00.0: irq 30 for MSI/MSI-X
Oct 30 08:14:49 woollyrat NetworkManager: <info>  (eth0): preparing device.
Oct 30 08:14:49 woollyrat kernel: [   22.029545] ADDRCONF(NETDEV_UP): eth0: link is not ready
Oct 30 08:14:49 woollyrat NetworkManager: <info>  (eth0): deactivating device (reason: 2).
Oct 30 08:14:49 woollyrat NetworkManager: Added default wired connection 'Auto eth0' for /sys/devices/pci0000:00/0000:00:1c.5/0000:08:00.0/net/eth0
Oct 30 08:14:49 woollyrat NetworkManager: <info>  modem-manager is now available
Oct 30 08:14:49 woollyrat NetworkManager: <WARN>  default_adapter_cb(): bluez error getting default adapter: The name org.bluez was not provided by any .service files
Oct 30 08:14:49 woollyrat NetworkManager: <info>  Trying to start the supplicant...
Oct 30 08:14:50 woollyrat NetworkManager: <info>  (eth1): supplicant manager state:  down -> idle
Oct 30 08:14:50 woollyrat NetworkManager: <info>  (eth1): device state change: 2 -> 3 (reason 0)
Oct 30 08:14:50 woollyrat NetworkManager: <info>  (eth1): supplicant interface state:  starting -> ready
Oct 30 08:14:52 woollyrat kernel: [   24.447754]   alloc irq_desc for 31 on node 0
Oct 30 08:14:52 woollyrat kernel: [   24.447757]   alloc kstat_irqs on node 0
Oct 30 08:14:52 woollyrat kernel: [   24.447769] fglrx_pci 0000:01:00.0: irq 31 for MSI/MSI-X
Oct 30 08:14:52 woollyrat kernel: [   24.448274] [fglrx] Firegl kernel thread PID: 1347
Oct 30 08:14:52 woollyrat kernel: [   25.201220] [fglrx] Gart USWC size:941 M.
Oct 30 08:14:52 woollyrat kernel: [   25.201223] [fglrx] Gart cacheable size:372 M.
Oct 30 08:14:52 woollyrat kernel: [   25.201228] [fglrx] Reserved FB block: Shared offset:0, size:1000000 
Oct 30 08:14:52 woollyrat kernel: [   25.201230] [fglrx] Reserved FB block: Unshared offset:fd08000, size:2f3000 
Oct 30 08:14:52 woollyrat kernel: [   25.201232] [fglrx] Reserved FB block: Unshared offset:fffb000, size:5000 
Oct 30 08:14:54 woollyrat kernel: [   26.414785] type=1505 audit(1256890494.074:16): operation="profile_replace" pid=1167 name=/usr/bin/evince
Oct 30 08:14:54 woollyrat kernel: [   26.415816] type=1505 audit(1256890494.074:17): operation="profile_replace" pid=1167 name=/usr/bin/evince-previewer
Oct 30 08:14:54 woollyrat kernel: [   26.416547] type=1505 audit(1256890494.074:18): operation="profile_replace" pid=1167 name=/usr/bin/evince-thumbnailer
Oct 30 08:14:54 woollyrat kernel: [   26.590980] type=1505 audit(1256890494.244:19): operation="profile_replace" pid=1349 name=/usr/lib/cups/backend/cups-pdf
Oct 30 08:14:54 woollyrat kernel: [   26.591159] type=1505 audit(1256890494.244:20): operation="profile_replace" pid=1349 name=/usr/sbin/cupsd
Oct 30 08:14:54 woollyrat kernel: [   26.637349] type=1505 audit(1256890494.294:21): operation="profile_replace" pid=1350 name=/usr/sbin/tcpdump
Oct 30 08:14:59 woollyrat kernel: [   32.240015] eth1: no IPv6 routers present
Oct 30 08:15:13 woollyrat kernel: [   46.328699] hda-intel: IRQ timing workaround is activated for card #2. Suggest a bigger bdl_pos_adj.
Oct 30 08:15:36 woollyrat kernel: [   69.057394] ppdev: user-space parallel port driver
Oct 30 08:16:19 woollyrat kernel: [  111.952802] CE: hpet increasing min_delta_ns to 15000 nsec
Oct 30 08:16:29 woollyrat NetworkManager: <info>  Activation (eth1) starting connection 'Auto JackRobinson'
Oct 30 08:16:29 woollyrat NetworkManager: <info>  (eth1): device state change: 3 -> 4 (reason 0)
Oct 30 08:16:29 woollyrat NetworkManager: <info>  Activation (eth1) Stage 1 of 5 (Device Prepare) scheduled...
Oct 30 08:16:29 woollyrat NetworkManager: <info>  Activation (eth1) Stage 1 of 5 (Device Prepare) started...
Oct 30 08:16:29 woollyrat NetworkManager: <info>  Activation (eth1) Stage 2 of 5 (Device Configure) scheduled...
Oct 30 08:16:29 woollyrat NetworkManager: <info>  Activation (eth1) Stage 1 of 5 (Device Prepare) complete.
Oct 30 08:16:29 woollyrat NetworkManager: <info>  Activation (eth1) Stage 2 of 5 (Device Configure) starting...
Oct 30 08:16:29 woollyrat NetworkManager: <info>  (eth1): device state change: 4 -> 5 (reason 0)
Oct 30 08:16:29 woollyrat NetworkManager: <info>  Activation (eth1/wireless): access point 'Auto JackRobinson' has security, but secrets are required.
Oct 30 08:16:29 woollyrat NetworkManager: <info>  (eth1): device state change: 5 -> 6 (reason 0)
Oct 30 08:16:29 woollyrat NetworkManager: <info>  Activation (eth1) Stage 2 of 5 (Device Configure) complete.
Oct 30 08:16:29 woollyrat NetworkManager: <info>  Activation (eth1) Stage 1 of 5 (Device Prepare) scheduled...
Oct 30 08:16:29 woollyrat NetworkManager: <info>  Activation (eth1) Stage 1 of 5 (Device Prepare) started...
Oct 30 08:16:29 woollyrat NetworkManager: <info>  (eth1): device state change: 6 -> 4 (reason 0)
Oct 30 08:16:29 woollyrat NetworkManager: <info>  Activation (eth1) Stage 2 of 5 (Device Configure) scheduled...
Oct 30 08:16:29 woollyrat NetworkManager: <info>  Activation (eth1) Stage 1 of 5 (Device Prepare) complete.
Oct 30 08:16:29 woollyrat NetworkManager: <info>  Activation (eth1) Stage 2 of 5 (Device Configure) starting...
Oct 30 08:16:29 woollyrat NetworkManager: <info>  (eth1): device state change: 4 -> 5 (reason 0)
Oct 30 08:16:29 woollyrat NetworkManager: <info>  Activation (eth1/wireless): connection 'Auto JackRobinson' has security, and secrets exist.  No new secrets needed.
Oct 30 08:16:29 woollyrat NetworkManager: <info>  Config: added 'ssid' value 'JackRobinson'
Oct 30 08:16:29 woollyrat NetworkManager: <info>  Config: added 'scan_ssid' value '1'
Oct 30 08:16:29 woollyrat NetworkManager: <info>  Config: added 'key_mgmt' value 'WPA-PSK'
Oct 30 08:16:29 woollyrat NetworkManager: <info>  Config: added 'psk' value '<omitted>'
Oct 30 08:16:29 woollyrat NetworkManager: nm_setting_802_1x_get_pkcs11_engine_path: assertion `NM_IS_SETTING_802_1X (setting)' failed
Oct 30 08:16:29 woollyrat NetworkManager: nm_setting_802_1x_get_pkcs11_module_path: assertion `NM_IS_SETTING_802_1X (setting)' failed
Oct 30 08:16:29 woollyrat NetworkManager: <info>  Activation (eth1) Stage 2 of 5 (Device Configure) complete.
Oct 30 08:16:29 woollyrat NetworkManager: <info>  Config: set interface ap_scan to 1
Oct 30 08:16:29 woollyrat NetworkManager: <info>  (eth1): supplicant connection state:  scanning -> disconnected
Oct 30 08:16:31 woollyrat NetworkManager: <info>  (eth1): supplicant connection state:  disconnected -> scanning
Oct 30 08:16:36 woollyrat NetworkManager: <info>  (eth1): supplicant connection state:  scanning -> associating
Oct 30 08:16:36 woollyrat NetworkManager: <info>  (eth1): supplicant connection state:  associating -> 4-way handshake
Oct 30 08:16:36 woollyrat NetworkManager: <info>  (eth1): supplicant connection state:  4-way handshake -> associated
Oct 30 08:16:37 woollyrat NetworkManager: <info>  (eth1): supplicant connection state:  associated -> 4-way handshake
Oct 30 08:16:37 woollyrat NetworkManager: <info>  (eth1): supplicant connection state:  4-way handshake -> group handshake
Oct 30 08:16:38 woollyrat NetworkManager: <info>  (eth1): supplicant connection state:  group handshake -> completed
Oct 30 08:16:38 woollyrat NetworkManager: <info>  Activation (eth1/wireless) Stage 2 of 5 (Device Configure) successful.  Connected to wireless network 'JackRobinson'.
Oct 30 08:16:38 woollyrat NetworkManager: <info>  Activation (eth1) Stage 3 of 5 (IP Configure Start) scheduled.
Oct 30 08:16:38 woollyrat NetworkManager: <info>  Activation (eth1) Stage 3 of 5 (IP Configure Start) started...
Oct 30 08:16:38 woollyrat NetworkManager: <info>  (eth1): device state change: 5 -> 7 (reason 0)
Oct 30 08:16:38 woollyrat NetworkManager: <info>  Activation (eth1) Beginning DHCP transaction (timeout in 45 seconds)
Oct 30 08:16:38 woollyrat NetworkManager: <info>  dhclient started with pid 4100
Oct 30 08:16:38 woollyrat NetworkManager: <info>  Activation (eth1) Stage 4 of 5 (IP6 Configure Get) scheduled...
Oct 30 08:16:38 woollyrat NetworkManager: <info>  Activation (eth1) Stage 3 of 5 (IP Configure Start) complete.
Oct 30 08:16:38 woollyrat NetworkManager: <info>  Activation (eth1) Stage 4 of 5 (IP6 Configure Get) started...
Oct 30 08:16:38 woollyrat NetworkManager: <info>  Activation (eth1) Stage 4 of 5 (IP6 Configure Get) complete.
Oct 30 08:16:38 woollyrat dhclient: Internet Systems Consortium DHCP Client V3.1.2
Oct 30 08:16:38 woollyrat dhclient: Copyright 2004-2008 Internet Systems Consortium.
Oct 30 08:16:38 woollyrat dhclient: All rights reserved.
Oct 30 08:16:38 woollyrat dhclient: For info, please visit http://www.isc.org/sw/dhcp/
Oct 30 08:16:38 woollyrat dhclient: 
Oct 30 08:16:38 woollyrat NetworkManager: <info>  DHCP: device eth1 state changed (null) -> preinit
Oct 30 08:16:38 woollyrat dhclient: Listening on LPF/eth1/00:25:56:b2:90:38
Oct 30 08:16:38 woollyrat dhclient: Sending on   LPF/eth1/00:25:56:b2:90:38
Oct 30 08:16:38 woollyrat dhclient: Sending on   Socket/fallback
Oct 30 08:16:42 woollyrat dhclient: DHCPDISCOVER on eth1 to 255.255.255.255 port 67 interval 3
Oct 30 08:16:42 woollyrat dhclient: DHCPOFFER of 192.168.0.5 from 192.168.0.1
Oct 30 08:16:42 woollyrat dhclient: DHCPREQUEST of 192.168.0.5 on eth1 to 255.255.255.255 port 67
Oct 30 08:16:42 woollyrat dhclient: DHCPACK of 192.168.0.5 from 192.168.0.1
Oct 30 08:16:42 woollyrat dhclient: bound to 192.168.0.5 -- renewal in 127801 seconds.
Oct 30 08:16:42 woollyrat NetworkManager: <info>  DHCP: device eth1 state changed preinit -> bound
Oct 30 08:16:42 woollyrat NetworkManager: <info>  Activation (eth1) Stage 4 of 5 (IP4 Configure Get) scheduled...
Oct 30 08:16:42 woollyrat NetworkManager: <info>  Activation (eth1) Stage 4 of 5 (IP4 Configure Get) started...
Oct 30 08:16:42 woollyrat NetworkManager: <info>    address 192.168.0.5
Oct 30 08:16:42 woollyrat NetworkManager: <info>    prefix 24 (255.255.255.0)
Oct 30 08:16:42 woollyrat NetworkManager: <info>    gateway 192.168.0.1
Oct 30 08:16:42 woollyrat NetworkManager: <info>    nameserver '208.67.222.222'
Oct 30 08:16:42 woollyrat NetworkManager: <info>    nameserver '212.139.132.6'
Oct 30 08:16:42 woollyrat NetworkManager: <info>  Activation (eth1) Stage 5 of 5 (IP Configure Commit) scheduled...
Oct 30 08:16:42 woollyrat NetworkManager: <info>  Activation (eth1) Stage 4 of 5 (IP4 Configure Get) complete.
Oct 30 08:16:42 woollyrat NetworkManager: <info>  Activation (eth1) Stage 5 of 5 (IP Configure Commit) started...
Oct 30 08:16:43 woollyrat NetworkManager: <info>  (eth1): device state change: 7 -> 8 (reason 0)
Oct 30 08:16:43 woollyrat NetworkManager: <info>  Policy set 'Auto JackRobinson' (eth1) as default for routing and DNS.
Oct 30 08:16:43 woollyrat NetworkManager: <info>  Activation (eth1) successful, device activated.
Oct 30 08:16:43 woollyrat NetworkManager: <info>  Activation (eth1) Stage 5 of 5 (IP Configure Commit) complete.
Oct 30 08:17:49 woollyrat kernel: [  200.752596] CE: hpet increasing min_delta_ns to 22500 nsec
Oct 30 08:17:49 woollyrat kernel: [  200.752781] CE: hpet increasing min_delta_ns to 33750 nsec
Oct 30 08:17:49 woollyrat kernel: [  201.123294] CE: hpet increasing min_delta_ns to 50624 nsec
Oct 30 08:30:12 woollyrat kernel: [  943.872621] CE: hpet increasing min_delta_ns to 75936 nsec
Oct 30 08:36:33 woollyrat kernel: [ 1324.338804] CE: hpet increasing min_delta_ns to 113904 nsec
Oct 30 08:41:11 woollyrat NetworkManager: <info>  Sleeping...
Oct 30 08:41:11 woollyrat NetworkManager: <info>  (eth1): now unmanaged
Oct 30 08:41:11 woollyrat NetworkManager: <info>  (eth1): device state change: 8 -> 1 (reason 37)
Oct 30 08:41:11 woollyrat NetworkManager: <info>  (eth1): deactivating device (reason: 37).
Oct 30 08:41:11 woollyrat NetworkManager: <info>  (eth1): canceled DHCP transaction, dhcp client pid 4100
Oct 30 08:41:11 woollyrat NetworkManager: <WARN>  check_one_route(): (eth1) error -34 returned from rtnl_route_del(): Sucess#012
Oct 30 08:41:11 woollyrat NetworkManager: <info>  (eth1): cleaning up...
Oct 30 08:41:11 woollyrat NetworkManager: <info>  (eth1): taking down device.
Oct 30 08:41:11 woollyrat NetworkManager: <info>  (eth0): now unmanaged
Oct 30 08:41:11 woollyrat NetworkManager: <info>  (eth0): device state change: 2 -> 1 (reason 37)
Oct 30 08:41:11 woollyrat NetworkManager: <info>  (eth0): cleaning up...
Oct 30 08:41:11 woollyrat NetworkManager: <info>  (eth0): taking down device.
Oct 30 18:08:40 woollyrat kernel: [ 1604.493679] PM: Syncing filesystems ... done.
Oct 30 18:08:40 woollyrat kernel: [ 1604.500005] PM: Preparing system for mem sleep
Oct 30 18:08:40 woollyrat kernel: [ 1604.500008] Freezing user space processes ... (elapsed 0.00 seconds) done.
Oct 30 18:08:40 woollyrat kernel: [ 1604.500746] Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done.
Oct 30 18:08:40 woollyrat kernel: [ 1604.500807] PM: Entering mem sleep
Oct 30 18:08:40 woollyrat kernel: [ 1604.500813] Suspending console(s) (use no_console_suspend to debug)
Oct 30 18:08:40 woollyrat kernel: [ 1604.590055] sd 0:0:0:0: [sda] Synchronizing SCSI cache
Oct 30 18:08:40 woollyrat kernel: [ 1604.819383] sd 0:0:0:0: [sda] Stopping disk
Oct 30 18:08:40 woollyrat kernel: [ 1606.330384] ACPI handle has no context!
Oct 30 18:08:40 woollyrat kernel: [ 1606.331462] ACPI handle has no context!
Oct 30 18:08:40 woollyrat kernel: [ 1606.331468] sdhci-pci 0000:09:01.1: PME# disabled
Oct 30 18:08:40 woollyrat kernel: [ 1606.331474] sdhci-pci 0000:09:01.1: PCI INT B disabled
Oct 30 18:08:40 woollyrat kernel: [ 1606.331480] ACPI handle has no context!
Oct 30 18:08:40 woollyrat kernel: [ 1606.354210] ACPI handle has no context!
Oct 30 18:08:40 woollyrat kernel: [ 1606.370777] wl 0000:04:00.0: PCI INT A disabled
Oct 30 18:08:40 woollyrat kernel: [ 1606.390116] HDA Intel 0000:01:00.1: PCI INT B disabled
Oct 30 18:08:40 woollyrat kernel: [ 1606.390185] ACPI handle has no context!
Oct 30 18:08:40 woollyrat kernel: [ 1606.410138] [fglrx] Power down the ASIC .
Oct 30 18:08:40 woollyrat kernel: [ 1606.410166] [fglrx] Preparing suspend fglrx in kernel.
Oct 30 18:08:40 woollyrat kernel: [ 1606.410173] ------------[ cut here ]------------
Oct 30 18:08:40 woollyrat kernel: [ 1606.410181] WARNING: at /build/buildd/linux-2.6.31/mm/page_alloc.c:1751 __alloc_pages_slowpath+0x41b/0x4e0()
Oct 30 18:08:40 woollyrat kernel: [ 1606.410183] Hardware name: Studio 1737
Oct 30 18:08:40 woollyrat kernel: [ 1606.410185] Modules linked in: michael_mic arc4 ecb binfmt_misc ppdev snd_hda_codec_atihdmi snd_hda_codec_idt snd_usb_audio snd_hda_intel snd_usb_lib snd_hda_codec snd_seq_dummy snd_seq_oss snd_seq_midi snd_hwdep snd_rawmidi lib80211_crypt_tkip iptable_filter snd_pcm_oss snd_seq_midi_event joydev uvcvideo sdhci_pci ip_tables wl(P) snd_mixer_oss snd_seq fglrx(P) videodev sdhci x_tables snd_seq_device snd_pcm lib80211 snd_timer led_class snd_page_alloc snd v4l1_compat dell_wmi psmouse v4l2_compat_ioctl32 soundcore serio_raw dell_laptop lp dcdbas parport dm_raid45 xor usbhid tg3 video output ohci1394 intel_agp ieee1394
Oct 30 18:08:40 woollyrat kernel: [ 1606.410226] Pid: 6245, comm: pm-suspend Tainted: P           2.6.31-14-generic #48-Ubuntu
Oct 30 18:08:40 woollyrat kernel: [ 1606.410229] Call Trace:
Oct 30 18:08:40 woollyrat kernel: [ 1606.410235]  [<ffffffff8105e788>] warn_slowpath_common+0x78/0xb0
Oct 30 18:08:40 woollyrat kernel: [ 1606.410239]  [<ffffffff8105e7cf>] warn_slowpath_null+0xf/0x20
Oct 30 18:08:40 woollyrat kernel: [ 1606.410243]  [<ffffffff810e078b>] __alloc_pages_slowpath+0x41b/0x4e0
Oct 30 18:08:40 woollyrat kernel: [ 1606.410302]  [<ffffffffa0187bc2>] ? firegl_trace+0x72/0x1e0 [fglrx]
Oct 30 18:08:40 woollyrat kernel: [ 1606.410305]  [<ffffffff810e099e>] __alloc_pages_nodemask+0x14e/0x150
Oct 30 18:08:40 woollyrat kernel: [ 1606.410308]  [<ffffffff8110cea2>] alloc_pages_current+0x82/0xd0
Oct 30 18:08:40 woollyrat kernel: [ 1606.410311]  [<ffffffff810df989>] __get_free_pages+0x9/0x50
Oct 30 18:08:40 woollyrat kernel: [ 1606.410313]  [<ffffffff811162d5>] __kmalloc+0x125/0x1d0
Oct 30 18:08:40 woollyrat kernel: [ 1606.410338]  [<ffffffffa015e54e>] KCL_MEM_SmallBufferAllocAtomic+0xe/0x10 [fglrx]
Oct 30 18:08:40 woollyrat kernel: [ 1606.410365]  [<ffffffffa016df49>] firegl_save_fb+0x49/0x180 [fglrx]
Oct 30 18:08:40 woollyrat kernel: [ 1606.410393]  [<ffffffffa016d2f0>] ? firegl_pm_save_framebuffer+0x1f0/0x270 [fglrx]
Oct 30 18:08:40 woollyrat kernel: [ 1606.410422]  [<ffffffffa016fb93>] ? firegl_cail_powerdown+0xb3/0x1c0 [fglrx]
Oct 30 18:08:40 woollyrat kernel: [ 1606.410444]  [<ffffffffa015a0f2>] ? fglrx_pci_suspend+0x82/0x140 [fglrx]
Oct 30 18:08:40 woollyrat kernel: [ 1606.410449]  [<ffffffffa0565252>] ? azx_suspend+0x112/0x130 [snd_hda_intel]
Oct 30 18:08:40 woollyrat kernel: [ 1606.410453]  [<ffffffff8128e385>] ? pci_legacy_suspend+0x45/0xe0
Oct 30 18:08:40 woollyrat kernel: [ 1606.410455]  [<ffffffff8128ecf5>] ? pci_pm_suspend+0xd5/0x130
Oct 30 18:08:40 woollyrat kernel: [ 1606.410458]  [<ffffffff81324eea>] ? pm_op+0x13a/0x180
Oct 30 18:08:40 woollyrat kernel: [ 1606.410461]  [<ffffffff8132552a>] ? device_suspend+0xda/0x140
Oct 30 18:08:40 woollyrat kernel: [ 1606.410463]  [<ffffffff81325656>] ? dpm_suspend+0xc6/0x140
Oct 30 18:08:40 woollyrat kernel: [ 1606.410465]  [<ffffffff813256f2>] ? dpm_suspend_start+0x22/0x30
Oct 30 18:08:40 woollyrat kernel: [ 1606.410469]  [<ffffffff8109323c>] ? suspend_devices_and_enter+0x5c/0xe0
Oct 30 18:08:40 woollyrat kernel: [ 1606.410471]  [<ffffffff81093398>] ? enter_state+0xd8/0x110
Oct 30 18:08:40 woollyrat kernel: [ 1606.410473]  [<ffffffff81092952>] ? state_store+0x92/0x100
Oct 30 18:08:40 woollyrat kernel: [ 1606.410477]  [<ffffffff81274197>] ? kobj_attr_store+0x17/0x20
Oct 30 18:08:40 woollyrat kernel: [ 1606.410480]  [<ffffffff81184780>] ? sysfs_write_file+0xe0/0x160
Oct 30 18:08:40 woollyrat kernel: [ 1606.410483]  [<ffffffff8111ede8>] ? vfs_write+0xb8/0x1a0
Oct 30 18:08:40 woollyrat kernel: [ 1606.410486]  [<ffffffff8152bf74>] ? do_page_fault+0x194/0x370
Oct 30 18:08:40 woollyrat kernel: [ 1606.410488]  [<ffffffff8111f89c>] ? sys_write+0x4c/0x80
Oct 30 18:08:40 woollyrat kernel: [ 1606.410492]  [<ffffffff81012002>] ? system_call_fastpath+0x16/0x1b
Oct 30 18:08:40 woollyrat kernel: [ 1606.410494] ---[ end trace d1bea51e290a4dce ]---
Oct 30 18:08:40 woollyrat kernel: [ 1606.691854] [fglrx] Suspending fglrx in kernel completed.
Oct 30 18:08:40 woollyrat kernel: [ 1606.780112] ehci_hcd 0000:00:1d.7: PCI INT A disabled
Oct 30 18:08:40 woollyrat kernel: [ 1606.780121] uhci_hcd 0000:00:1d.2: PCI INT C disabled
Oct 30 18:08:40 woollyrat kernel: [ 1606.780129] uhci_hcd 0000:00:1d.1: PCI INT B disabled
Oct 30 18:08:40 woollyrat kernel: [ 1606.780137] uhci_hcd 0000:00:1d.0: PCI INT A disabled
Oct 30 18:08:40 woollyrat kernel: [ 1606.910402] HDA Intel 0000:00:1b.0: PCI INT A disabled
Oct 30 18:08:40 woollyrat kernel: [ 1606.930140] ehci_hcd 0000:00:1a.7: PCI INT C disabled
Oct 30 18:08:40 woollyrat kernel: [ 1606.930148] uhci_hcd 0000:00:1a.2: PCI INT C disabled
Oct 30 18:08:40 woollyrat kernel: [ 1606.930156] uhci_hcd 0000:00:1a.1: PCI INT B disabled
Oct 30 18:08:40 woollyrat kernel: [ 1606.930164] uhci_hcd 0000:00:1a.0: PCI INT A disabled
Oct 30 18:08:40 woollyrat kernel: [ 1606.930228] PM: suspend devices took 2.430 seconds
Oct 30 18:08:40 woollyrat kernel: [ 1606.930597] ehci_hcd 0000:00:1d.7: PME# disabled
Oct 30 18:08:40 woollyrat kernel: [ 1606.950340] ehci_hcd 0000:00:1a.7: PME# disabled
Oct 30 18:08:40 woollyrat kernel: [ 1607.090048] ACPI: Preparing to enter system sleep state S3
Oct 30 18:08:40 woollyrat kernel: [ 1607.094728] Disabling non-boot CPUs ...
Oct 30 18:08:40 woollyrat kernel: [ 1607.200025] CPU 1 is now offline
Oct 30 18:08:40 woollyrat kernel: [ 1607.200028] SMP alternatives: switching to UP code
Oct 30 18:08:40 woollyrat kernel: [ 1607.205911] CPU0 attaching NULL sched-domain.
Oct 30 18:08:40 woollyrat kernel: [ 1607.205913] CPU1 attaching NULL sched-domain.
Oct 30 18:08:40 woollyrat kernel: [ 1607.205921] CPU0 attaching NULL sched-domain.
Oct 30 18:08:40 woollyrat kernel: [ 1607.206123] CPU1 is down
Oct 30 18:08:40 woollyrat kernel: [ 1607.206161] Extended CMOS year: 2000
Oct 30 18:08:40 woollyrat kernel: [ 1607.206161] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
Oct 30 18:08:40 woollyrat kernel: [ 1607.206161] Back to C!
Oct 30 18:08:40 woollyrat kernel: [ 1607.206161] CPU0: Thermal LVT vector (0xfa) already installed
Oct 30 18:08:40 woollyrat kernel: [ 1607.206161] Extended CMOS year: 2000
Oct 30 18:08:40 woollyrat kernel: [ 1607.206161] Enabling non-boot CPUs ...
Oct 30 18:08:40 woollyrat kernel: [ 1607.206161] SMP alternatives: switching to SMP code
Oct 30 18:08:40 woollyrat kernel: [ 1607.211992] Booting processor 1 APIC 0x1 ip 0x6000
Oct 30 18:08:40 woollyrat kernel: [ 1607.205787] Initializing CPU#1
Oct 30 18:08:40 woollyrat kernel: [ 1607.205787] Calibrating delay using timer specific routine.. 4520.93 BogoMIPS (lpj=22604677)
Oct 30 18:08:40 woollyrat kernel: [ 1607.205787] CPU: L1 I cache: 32K, L1 D cache: 32K
Oct 30 18:08:40 woollyrat kernel: [ 1607.205787] CPU: L2 cache: 3072K
Oct 30 18:08:40 woollyrat kernel: [ 1607.205787] CPU 1/0x1 -> Node 0
Oct 30 18:08:40 woollyrat kernel: [ 1607.205787] CPU: Physical Processor ID: 0
Oct 30 18:08:40 woollyrat kernel: [ 1607.205787] CPU: Processor Core ID: 1
Oct 30 18:08:40 woollyrat kernel: [ 1607.205787] mce: CPU supports 6 MCE banks
Oct 30 18:08:40 woollyrat kernel: [ 1607.205787] CPU1: Thermal monitoring enabled (TM2)
Oct 30 18:08:40 woollyrat kernel: [ 1607.205787] x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106
Oct 30 18:08:40 woollyrat kernel: [ 1607.371619] CPU1: Intel(R) Core(TM)2 Duo CPU     P8400  @ 2.26GHz stepping 0a
Oct 30 18:08:40 woollyrat kernel: [ 1607.371671] CPU0 attaching NULL sched-domain.
Oct 30 18:08:40 woollyrat kernel: [ 1607.380021] Switched to high resolution mode on CPU 1
Oct 30 18:08:40 woollyrat kernel: [ 1607.400020] CPU0 attaching sched-domain:
Oct 30 18:08:40 woollyrat kernel: [ 1607.400022]  domain 0: span 0-1 level MC
Oct 30 18:08:40 woollyrat kernel: [ 1607.400024]   groups: 0 1
Oct 30 18:08:40 woollyrat kernel: [ 1607.400028] CPU1 attaching sched-domain:
Oct 30 18:08:40 woollyrat kernel: [ 1607.400029]  domain 0: span 0-1 level MC
Oct 30 18:08:40 woollyrat kernel: [ 1607.400031]   groups: 1 0
Oct 30 18:08:40 woollyrat kernel: [ 1607.402515] CPU1 is up
Oct 30 18:08:40 woollyrat kernel: [ 1607.402517] ACPI: Waking up from system sleep state S3
Oct 30 18:08:40 woollyrat kernel: [ 1607.520787] pcieport-driver 0000:00:01.0: restoring config space at offset 0x6 (was 0x0, writing 0x10100)
Oct 30 18:08:40 woollyrat kernel: [ 1607.520803] pcieport-driver 0000:00:01.0: restoring config space at offset 0x3 (was 0x10000, writing 0x10010)
Oct 30 18:08:40 woollyrat kernel: [ 1607.520815] pcieport-driver 0000:00:01.0: restoring config space at offset 0x1 (was 0x100107, writing 0x100507)
Oct 30 18:08:40 woollyrat kernel: [ 1607.520955] uhci_hcd 0000:00:1a.0: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001)
Oct 30 18:08:40 woollyrat kernel: [ 1607.521046] uhci_hcd 0000:00:1a.1: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001)
Oct 30 18:08:40 woollyrat kernel: [ 1607.521087] uhci_hcd 0000:00:1a.2: restoring config space at offset 0xf (was 0x300, writing 0x30a)
Oct 30 18:08:40 woollyrat kernel: [ 1607.521116] uhci_hcd 0000:00:1a.2: restoring config space at offset 0x8 (was 0x1, writing 0x1841)
Oct 30 18:08:40 woollyrat kernel: [ 1607.521146] uhci_hcd 0000:00:1a.2: restoring config space at offset 0x1 (was 0x2900000, writing 0x2900001)
Oct 30 18:08:40 woollyrat kernel: [ 1607.521256] ehci_hcd 0000:00:1a.7: restoring config space at offset 0x1 (was 0x2900106, writing 0x2900102)
Oct 30 18:08:40 woollyrat kernel: [ 1607.521301] ehci_hcd 0000:00:1a.7: PME# disabled
Oct 30 18:08:40 woollyrat kernel: [ 1607.521342] HDA Intel 0000:00:1b.0: restoring config space at offset 0xf (was 0x100, writing 0x10a)
Oct 30 18:08:40 woollyrat kernel: [ 1607.521390] HDA Intel 0000:00:1b.0: restoring config space at offset 0x3 (was 0x0, writing 0x10)
Oct 30 18:08:40 woollyrat kernel: [ 1607.521402] HDA Intel 0000:00:1b.0: restoring config space at offset 0x1 (was 0x100106, writing 0x100102)
Oct 30 18:08:40 woollyrat kernel: [ 1607.521475] pcieport-driver 0000:00:1c.0: restoring config space at offset 0xf (was 0x40100, writing 0x4010b)
Oct 30 18:08:40 woollyrat kernel: [ 1607.521501] pcieport-driver 0000:00:1c.0: restoring config space at offset 0x9 (was 0x10001, writing 0xf1f1f001)
Oct 30 18:08:40 woollyrat kernel: [ 1607.521509] pcieport-driver 0000:00:1c.0: restoring config space at offset 0x8 (was 0x0, writing 0xf7f0f600)
Oct 30 18:08:40 woollyrat kernel: [ 1607.521517] pcieport-driver 0000:00:1c.0: restoring config space at offset 0x7 (was 0x0, writing 0x3030)
Oct 30 18:08:40 woollyrat kernel: [ 1607.521526] pcieport-driver 0000:00:1c.0: restoring config space at offset 0x6 (was 0x0, writing 0x30200)
Oct 30 18:08:40 woollyrat kernel: [ 1607.521542] pcieport-driver 0000:00:1c.0: restoring config space at offset 0x3 (was 0x810000, writing 0x810010)
Oct 30 18:08:40 woollyrat kernel: [ 1607.521553] pcieport-driver 0000:00:1c.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100507)
Oct 30 18:08:40 woollyrat kernel: [ 1607.521666] pcieport-driver 0000:00:1c.1: restoring config space at offset 0xf (was 0x40200, writing 0x40205)
Oct 30 18:08:40 woollyrat kernel: [ 1607.521699] pcieport-driver 0000:00:1c.1: restoring config space at offset 0x7 (was 0x3030, writing 0x4040)
Oct 30 18:08:40 woollyrat kernel: [ 1607.521718] pcieport-driver 0000:00:1c.1: restoring config space at offset 0x3 (was 0x810000, writing 0x810010)
Oct 30 18:08:40 woollyrat kernel: [ 1607.521730] pcieport-driver 0000:00:1c.1: restoring config space at offset 0x1 (was 0x100000, writing 0x100507)
Oct 30 18:08:40 woollyrat kernel: [ 1607.521842] pcieport-driver 0000:00:1c.3: restoring config space at offset 0xf (was 0x40400, writing 0x4040a)
Oct 30 18:08:40 woollyrat kernel: [ 1607.521868] pcieport-driver 0000:00:1c.3: restoring config space at offset 0x9 (was 0x10001, writing 0xf5f1f401)
Oct 30 18:08:40 woollyrat kernel: [ 1607.521880] pcieport-driver 0000:00:1c.3: restoring config space at offset 0x7 (was 0x20000000, writing 0x5050)
Oct 30 18:08:40 woollyrat kernel: [ 1607.521899] pcieport-driver 0000:00:1c.3: restoring config space at offset 0x3 (was 0x810000, writing 0x810010)
Oct 30 18:08:40 woollyrat kernel: [ 1607.521911] pcieport-driver 0000:00:1c.3: restoring config space at offset 0x1 (was 0x100000, writing 0x100507)
Oct 30 18:08:40 woollyrat kernel: [ 1607.522023] pcieport-driver 0000:00:1c.5: restoring config space at offset 0xf (was 0x40200, writing 0x40205)
Oct 30 18:08:40 woollyrat kernel: [ 1607.522049] pcieport-driver 0000:00:1c.5: restoring config space at offset 0x9 (was 0x10001, writing 0x1fff1)
Oct 30 18:08:40 woollyrat kernel: [ 1607.522062] pcieport-driver 0000:00:1c.5: restoring config space at offset 0x7 (was 0x20000000, writing 0x200000f0)
Oct 30 18:08:40 woollyrat kernel: [ 1607.522081] pcieport-driver 0000:00:1c.5: restoring config space at offset 0x3 (was 0x810000, writing 0x810010)
Oct 30 18:08:40 woollyrat kernel: [ 1607.522093] pcieport-driver 0000:00:1c.5: restoring config space at offset 0x1 (was 0x100000, writing 0x100507)
Oct 30 18:08:40 woollyrat kernel: [ 1607.522236] uhci_hcd 0000:00:1d.0: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001)
Oct 30 18:08:40 woollyrat kernel: [ 1607.522327] uhci_hcd 0000:00:1d.1: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001)
Oct 30 18:08:40 woollyrat kernel: [ 1607.522418] uhci_hcd 0000:00:1d.2: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001)
Oct 30 18:08:40 woollyrat kernel: [ 1607.522528] ehci_hcd 0000:00:1d.7: restoring config space at offset 0x1 (was 0x2900106, writing 0x2900102)
Oct 30 18:08:40 woollyrat kernel: [ 1607.522573] ehci_hcd 0000:00:1d.7: PME# disabled
Oct 30 18:08:40 woollyrat kernel: [ 1607.522593] pci 0000:00:1e.0: restoring config space at offset 0xf (was 0x40000, writing 0x400ff)
Oct 30 18:08:40 woollyrat kernel: [ 1607.522619] pci 0000:00:1e.0: restoring config space at offset 0x9 (was 0x10001, writing 0x1fff1)
Oct 30 18:08:40 woollyrat kernel: [ 1607.522627] pci 0000:00:1e.0: restoring config space at offset 0x8 (was 0x0, writing 0xfc20fc20)
Oct 30 18:08:40 woollyrat kernel: [ 1607.522636] pci 0000:00:1e.0: restoring config space at offset 0x7 (was 0x22800000, writing 0x228000f0)
Oct 30 18:08:40 woollyrat kernel: [ 1607.522662] pci 0000:00:1e.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100107)
Oct 30 18:08:40 woollyrat kernel: [ 1607.522821] ahci 0000:00:1f.2: restoring config space at offset 0xf (was 0x200, writing 0x20a)
Oct 30 18:08:40 woollyrat kernel: [ 1607.522876] ahci 0000:00:1f.2: restoring config space at offset 0x1 (was 0x2b00007, writing 0x2b00407)
Oct 30 18:08:40 woollyrat kernel: [ 1607.522999] pci 0000:00:1f.3: restoring config space at offset 0x4 (was 0x4, writing 0xc0000004)
Oct 30 18:08:40 woollyrat kernel: [ 1607.523084] fglrx_pci 0000:01:00.0: restoring config space at offset 0xf (was 0x1ff, writing 0x105)
Oct 30 18:08:40 woollyrat kernel: [ 1607.523126] fglrx_pci 0000:01:00.0: restoring config space at offset 0x6 (was 0x0, writing 0xfc000000)
Oct 30 18:08:40 woollyrat kernel: [ 1607.523136] fglrx_pci 0000:01:00.0: restoring config space at offset 0x5 (was 0x1, writing 0x2001)
Oct 30 18:08:40 woollyrat kernel: [ 1607.523146] fglrx_pci 0000:01:00.0: restoring config space at offset 0x4 (was 0x8, writing 0xd0000008)
Oct 30 18:08:40 woollyrat kernel: [ 1607.523154] fglrx_pci 0000:01:00.0: restoring config space at offset 0x3 (was 0x800000, writing 0x800010)
Oct 30 18:08:40 woollyrat kernel: [ 1607.523168] fglrx_pci 0000:01:00.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100503)
Oct 30 18:08:40 woollyrat kernel: [ 1607.523314] HDA Intel 0000:01:00.1: restoring config space at offset 0xf (was 0x2ff, writing 0x20b)
Oct 30 18:08:40 woollyrat kernel: [ 1607.523366] HDA Intel 0000:01:00.1: restoring config space at offset 0x4 (was 0x0, writing 0xfc010000)
Oct 30 18:08:40 woollyrat kernel: [ 1607.523376] HDA Intel 0000:01:00.1: restoring config space at offset 0x3 (was 0x800000, writing 0x800010)
Oct 30 18:08:40 woollyrat kernel: [ 1607.523389] HDA Intel 0000:01:00.1: restoring config space at offset 0x1 (was 0x100000, writing 0x40100103)
Oct 30 18:08:40 woollyrat kernel: [ 1607.523719] wl 0000:04:00.0: restoring config space at offset 0xf (was 0x100, writing 0x10b)
Oct 30 18:08:40 woollyrat kernel: [ 1607.523803] wl 0000:04:00.0: restoring config space at offset 0x4 (was 0x4, writing 0xf8000004)
Oct 30 18:08:40 woollyrat kernel: [ 1607.523818] wl 0000:04:00.0: restoring config space at offset 0x3 (was 0x0, writing 0x10)
Oct 30 18:08:40 woollyrat kernel: [ 1607.523840] wl 0000:04:00.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100106)
Oct 30 18:08:40 woollyrat kernel: [ 1607.524248] tg3 0000:08:00.0: restoring config space at offset 0x3 (was 0x0, writing 0x10)
Oct 30 18:08:40 woollyrat kernel: [ 1607.524266] tg3 0000:08:00.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100106)
Oct 30 18:08:40 woollyrat kernel: [ 1607.524366] ohci1394 0000:09:01.0: restoring config space at offset 0xf (was 0x4020100, writing 0x402010b)
Oct 30 18:08:40 woollyrat kernel: [ 1607.524414] ohci1394 0000:09:01.0: restoring config space at offset 0x4 (was 0x0, writing 0xfc200000)
Oct 30 18:08:40 woollyrat kernel: [ 1607.524424] ohci1394 0000:09:01.0: restoring config space at offset 0x3 (was 0x800000, writing 0x802010)
Oct 30 18:08:40 woollyrat kernel: [ 1607.524437] ohci1394 0000:09:01.0: restoring config space at offset 0x1 (was 0x2100000, writing 0x2100106)
Oct 30 18:08:40 woollyrat kernel: [ 1607.524485] sdhci-pci 0000:09:01.1: restoring config space at offset 0xf (was 0x200, writing 0x20a)
Oct 30 18:08:40 woollyrat kernel: [ 1607.524533] sdhci-pci 0000:09:01.1: restoring config space at offset 0x4 (was 0x0, writing 0xfc200800)
Oct 30 18:08:40 woollyrat kernel: [ 1607.524542] sdhci-pci 0000:09:01.1: restoring config space at offset 0x3 (was 0x804000, writing 0x804010)
Oct 30 18:08:40 woollyrat kernel: [ 1607.524555] sdhci-pci 0000:09:01.1: restoring config space at offset 0x1 (was 0x2100000, writing 0x2100106)
Oct 30 18:08:40 woollyrat kernel: [ 1607.524579] pci 0000:09:01.2: restoring config space at offset 0xf (was 0x200, writing 0x20a)
Oct 30 18:08:40 woollyrat kernel: [ 1607.524602] pci 0000:09:01.2: restoring config space at offset 0x4 (was 0x0, writing 0xfc200c00)
Oct 30 18:08:40 woollyrat kernel: [ 1607.524608] pci 0000:09:01.2: restoring config space at offset 0x3 (was 0x804000, writing 0x804010)
Oct 30 18:08:40 woollyrat kernel: [ 1607.524615] pci 0000:09:01.2: restoring config space at offset 0x1 (was 0x2100000, writing 0x2100106)
Oct 30 18:08:40 woollyrat kernel: [ 1607.524620] pci 0000:09:01.2: restoring config space at offset 0x0 (was 0x8431180, writing 0x5921180)
Oct 30 18:08:40 woollyrat kernel: [ 1607.524641] pci 0000:09:01.3: restoring config space at offset 0xf (was 0x200, writing 0x20a)
Oct 30 18:08:40 woollyrat kernel: [ 1607.524664] pci 0000:09:01.3: restoring config space at offset 0x4 (was 0x0, writing 0xfc201000)
Oct 30 18:08:40 woollyrat kernel: [ 1607.524669] pci 0000:09:01.3: restoring config space at offset 0x3 (was 0x804000, writing 0x804010)
Oct 30 18:08:40 woollyrat kernel: [ 1607.524676] pci 0000:09:01.3: restoring config space at offset 0x1 (was 0x2100000, writing 0x2100106)
Oct 30 18:08:40 woollyrat kernel: [ 1607.524682] pci 0000:09:01.3: restoring config space at offset 0x0 (was 0x5921180, writing 0x8521180)
Oct 30 18:08:40 woollyrat kernel: [ 1607.675882] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
Oct 30 18:08:40 woollyrat kernel: [ 1607.675891] uhci_hcd 0000:00:1a.0: setting latency timer to 64
Oct 30 18:08:40 woollyrat kernel: [ 1607.675915] usb usb3: root hub lost power or was reset
Oct 30 18:08:40 woollyrat kernel: [ 1607.675936] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
Oct 30 18:08:40 woollyrat kernel: [ 1607.675948] uhci_hcd 0000:00:1a.1: setting latency timer to 64
Oct 30 18:08:40 woollyrat kernel: [ 1607.675969] usb usb4: root hub lost power or was reset
Oct 30 18:08:40 woollyrat kernel: [ 1607.675986] uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 19 (level, low) -> IRQ 19
Oct 30 18:08:40 woollyrat kernel: [ 1607.675991] uhci_hcd 0000:00:1a.2: setting latency timer to 64
Oct 30 18:08:40 woollyrat kernel: [ 1607.676014] usb usb5: root hub lost power or was reset
Oct 30 18:08:40 woollyrat kernel: [ 1607.676031] ehci_hcd 0000:00:1a.7: PME# disabled
Oct 30 18:08:40 woollyrat kernel: [ 1607.676035] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 19 (level, low) -> IRQ 19
Oct 30 18:08:40 woollyrat kernel: [ 1607.676040] ehci_hcd 0000:00:1a.7: setting latency timer to 64
Oct 30 18:08:40 woollyrat kernel: [ 1607.676063] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
Oct 30 18:08:40 woollyrat kernel: [ 1607.676069] HDA Intel 0000:00:1b.0: setting latency timer to 64
Oct 30 18:08:40 woollyrat kernel: [ 1607.676094] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
Oct 30 18:08:40 woollyrat kernel: [ 1607.676100] uhci_hcd 0000:00:1d.0: setting latency timer to 64
Oct 30 18:08:40 woollyrat kernel: [ 1607.676122] usb usb6: root hub lost power or was reset
Oct 30 18:08:40 woollyrat kernel: [ 1607.676139] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
Oct 30 18:08:40 woollyrat kernel: [ 1607.676145] uhci_hcd 0000:00:1d.1: setting latency timer to 64
Oct 30 18:08:40 woollyrat kernel: [ 1607.676167] usb usb7: root hub lost power or was reset
Oct 30 18:08:40 woollyrat kernel: [ 1607.676184] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
Oct 30 18:08:40 woollyrat kernel: [ 1607.676189] uhci_hcd 0000:00:1d.2: setting latency timer to 64
Oct 30 18:08:40 woollyrat kernel: [ 1607.676211] usb usb8: root hub lost power or was reset
Oct 30 18:08:40 woollyrat kernel: [ 1607.676229] ehci_hcd 0000:00:1d.7: PME# disabled
Oct 30 18:08:40 woollyrat kernel: [ 1607.676232] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
Oct 30 18:08:40 woollyrat kernel: [ 1607.676238] ehci_hcd 0000:00:1d.7: setting latency timer to 64
Oct 30 18:08:40 woollyrat kernel: [ 1607.676261] pci 0000:00:1e.0: setting latency timer to 64
Oct 30 18:08:40 woollyrat kernel: [ 1607.676271] ahci 0000:00:1f.2: setting latency timer to 64
Oct 30 18:08:40 woollyrat kernel: [ 1607.676357] fglrx_pci 0000:01:00.0: setting latency timer to 64
Oct 30 18:08:40 woollyrat kernel: [ 1607.682933] [fglrx] Preparing resume fglrx in kernel.
Oct 30 18:08:40 woollyrat kernel: [ 1607.702210] [fglrx] Resuming fglrx in kernel completed.
Oct 30 18:08:40 woollyrat kernel: [ 1607.702214] [fglrx] Power up the ASIC
Oct 30 18:08:40 woollyrat kernel: [ 1607.702361] HDA Intel 0000:01:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
Oct 30 18:08:40 woollyrat kernel: [ 1607.702368] HDA Intel 0000:01:00.1: setting latency timer to 64
Oct 30 18:08:40 woollyrat kernel: [ 1607.702582] wl 0000:04:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
Oct 30 18:08:40 woollyrat kernel: [ 1607.702598] wl 0000:04:00.0: setting latency timer to 64
Oct 30 18:08:40 woollyrat kernel: [ 1607.782122] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[17]  MMIO=[fc200000-fc2007ff]  Max Packet=[2048]  IR/IT contexts=[4/4]
Oct 30 18:08:40 woollyrat kernel: [ 1607.788386] sdhci-pci 0000:09:01.1: PCI INT B -> GSI 18 (level, low) -> IRQ 18
Oct 30 18:08:40 woollyrat kernel: [ 1607.789404] pci 0000:09:01.2: PME# disabled
Oct 30 18:08:40 woollyrat kernel: [ 1607.789410] pci 0000:09:01.3: PME# disabled
Oct 30 18:08:40 woollyrat kernel: [ 1607.974684] sd 0:0:0:0: [sda] Starting disk
Oct 30 18:08:40 woollyrat kernel: [ 1608.050106] ata5: SATA link down (SStatus 0 SControl 300)
Oct 30 18:08:40 woollyrat kernel: [ 1608.050129] ata6: SATA link down (SStatus 0 SControl 300)
Oct 30 18:08:40 woollyrat kernel: [ 1608.230099] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
Oct 30 18:08:40 woollyrat kernel: [ 1608.239504] ata2.00: configured for UDMA/133
Oct 30 18:08:40 woollyrat kernel: [ 1608.260100] ata2: exception Emask 0x10 SAct 0x0 SErr 0x0 action 0x9 t4
Oct 30 18:08:40 woollyrat kernel: [ 1608.260103] ata2: irq_stat 0x40000001
Oct 30 18:08:40 woollyrat kernel: [ 1608.268566] ata2.00: configured for UDMA/133
Oct 30 18:08:40 woollyrat kernel: [ 1608.268569] ata2: EH complete
Oct 30 18:08:40 woollyrat kernel: [ 1611.830102] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
Oct 30 18:08:40 woollyrat kernel: [ 1612.051887] ata1.00: configured for UDMA/133
Oct 30 18:08:40 woollyrat kernel: [ 1612.070099] ata1: exception Emask 0x10 SAct 0x0 SErr 0x0 action 0x9 t4
Oct 30 18:08:40 woollyrat kernel: [ 1612.070102] ata1: irq_stat 0x00400040, connection status changed
Oct 30 18:08:40 woollyrat kernel: [ 1612.075174] ata1.00: configured for UDMA/133
Oct 30 18:08:40 woollyrat kernel: [ 1612.075176] ata1: EH complete
Oct 30 18:08:40 woollyrat kernel: [ 1612.220105] usb 1-6: reset high speed USB device using ehci_hcd and address 2
Oct 30 18:08:40 woollyrat kernel: [ 1612.560100] usb 2-3: reset high speed USB device using ehci_hcd and address 2
Oct 30 18:08:40 woollyrat kernel: [ 1613.200316] usb 2-3.3: reset low speed USB device using ehci_hcd and address 3
Oct 30 18:08:40 woollyrat kernel: [ 1613.580315] usb 2-3.4: reset full speed USB device using ehci_hcd and address 4
Oct 30 18:08:40 woollyrat kernel: [ 1613.693555] snd-usb-audio 2-3.4:1.0: no reset_resume for driver snd-usb-audio?
Oct 30 18:08:40 woollyrat kernel: [ 1613.693559] snd-usb-audio 2-3.4:1.1: no reset_resume for driver snd-usb-audio?
Oct 30 18:08:40 woollyrat kernel: [ 1613.693561] snd-usb-audio 2-3.4:1.2: no reset_resume for driver snd-usb-audio?
Oct 30 18:08:40 woollyrat kernel: [ 1613.740467] PM: resume devices took 6.220 seconds
Oct 30 18:08:40 woollyrat kernel: [ 1613.740469] ------------[ cut here ]------------
Oct 30 18:08:40 woollyrat kernel: [ 1613.740475] WARNING: at /build/buildd/linux-2.6.31/kernel/power/suspend_test.c:52 suspend_test_finish+0x7c/0x80()
Oct 30 18:08:40 woollyrat kernel: [ 1613.740477] Hardware name: Studio 1737
Oct 30 18:08:40 woollyrat kernel: [ 1613.740478] Component: resume devices
Oct 30 18:08:40 woollyrat kernel: [ 1613.740479] Modules linked in: michael_mic arc4 ecb binfmt_misc ppdev snd_hda_codec_atihdmi snd_hda_codec_idt snd_usb_audio snd_hda_intel snd_usb_lib snd_hda_codec snd_seq_dummy snd_seq_oss snd_seq_midi snd_hwdep snd_rawmidi lib80211_crypt_tkip iptable_filter snd_pcm_oss snd_seq_midi_event joydev uvcvideo sdhci_pci ip_tables wl(P) snd_mixer_oss snd_seq fglrx(P) videodev sdhci x_tables snd_seq_device snd_pcm lib80211 snd_timer led_class snd_page_alloc snd v4l1_compat dell_wmi psmouse v4l2_compat_ioctl32 soundcore serio_raw dell_laptop lp dcdbas parport dm_raid45 xor usbhid tg3 video output ohci1394 intel_agp ieee1394
Oct 30 18:08:40 woollyrat kernel: [ 1613.740513] Pid: 6245, comm: pm-suspend Tainted: P        W  2.6.31-14-generic #48-Ubuntu
Oct 30 18:08:40 woollyrat kernel: [ 1613.740515] Call Trace:
Oct 30 18:08:40 woollyrat kernel: [ 1613.740521]  [<ffffffff8105e788>] warn_slowpath_common+0x78/0xb0
Oct 30 18:08:40 woollyrat kernel: [ 1613.740523]  [<ffffffff8105e81c>] warn_slowpath_fmt+0x3c/0x40
Oct 30 18:08:40 woollyrat kernel: [ 1613.740526]  [<ffffffff810934dc>] suspend_test_finish+0x7c/0x80
Oct 30 18:08:40 woollyrat kernel: [ 1613.740529]  [<ffffffff81093289>] suspend_devices_and_enter+0xa9/0xe0
Oct 30 18:08:40 woollyrat kernel: [ 1613.740532]  [<ffffffff81093398>] enter_state+0xd8/0x110
Oct 30 18:08:40 woollyrat kernel: [ 1613.740534]  [<ffffffff81092952>] state_store+0x92/0x100
Oct 30 18:08:40 woollyrat kernel: [ 1613.740538]  [<ffffffff81274197>] kobj_attr_store+0x17/0x20
Oct 30 18:08:40 woollyrat kernel: [ 1613.740542]  [<ffffffff81184780>] sysfs_write_file+0xe0/0x160
Oct 30 18:08:40 woollyrat kernel: [ 1613.740546]  [<ffffffff8111ede8>] vfs_write+0xb8/0x1a0
Oct 30 18:08:40 woollyrat kernel: [ 1613.740549]  [<ffffffff8152bf74>] ? do_page_fault+0x194/0x370
Oct 30 18:08:40 woollyrat kernel: [ 1613.740552]  [<ffffffff8111f89c>] sys_write+0x4c/0x80
Oct 30 18:08:40 woollyrat kernel: [ 1613.740555]  [<ffffffff81012002>] system_call_fastpath+0x16/0x1b
Oct 30 18:08:40 woollyrat kernel: [ 1613.740557] ---[ end trace d1bea51e290a4dcf ]---
Oct 30 18:08:40 woollyrat kernel: [ 1613.740777] PM: Finishing wakeup.
Oct 30 18:08:40 woollyrat kernel: [ 1613.740779] Restarting tasks ... done.
Oct 30 18:08:41 woollyrat kernel: [ 1613.906607] tg3 0000:08:00.0: PME# disabled
Oct 30 18:08:41 woollyrat kernel: [ 1613.906955] tg3 0000:08:00.0: irq 30 for MSI/MSI-X
Oct 30 18:08:41 woollyrat NetworkManager: <info>  Waking up...
Oct 30 18:08:41 woollyrat NetworkManager: <info>  (eth1): now managed
Oct 30 18:08:41 woollyrat NetworkManager: <info>  (eth1): device state change: 1 -> 2 (reason 2)
Oct 30 18:08:41 woollyrat NetworkManager: <info>  (eth1): bringing up device.
Oct 30 18:08:41 woollyrat NetworkManager: <info>  (eth1): preparing device.
Oct 30 18:08:41 woollyrat NetworkManager: <info>  (eth1): deactivating device (reason: 2).
Oct 30 18:08:41 woollyrat NetworkManager: <info>  Unmanaged Device found; state CONNECTED forced. (see http://bugs.launchpad.net/bugs/191889)
Oct 30 18:08:41 woollyrat NetworkManager: <info>  Unmanaged Device found; state CONNECTED forced. (see http://bugs.launchpad.net/bugs/191889)
Oct 30 18:08:41 woollyrat NetworkManager: <info>  (eth0): now managed
Oct 30 18:08:41 woollyrat NetworkManager: <info>  (eth0): device state change: 1 -> 2 (reason 2)
Oct 30 18:08:41 woollyrat NetworkManager: <info>  (eth0): bringing up device.
Oct 30 18:08:41 woollyrat NetworkManager: <info>  (eth0): preparing device.
Oct 30 18:08:41 woollyrat NetworkManager: <info>  (eth0): deactivating device (reason: 2).
Oct 30 18:08:41 woollyrat kernel: [ 1614.210838] ADDRCONF(NETDEV_UP): eth0: link is not ready
Oct 30 18:08:41 woollyrat NetworkManager: <info>  (eth1): supplicant interface state:  starting -> ready
Oct 30 18:08:41 woollyrat NetworkManager: <info>  (eth1): device state change: 2 -> 3 (reason 42)
Oct 30 18:08:41 woollyrat NetworkManager: <info>  Activation (eth1) starting connection 'Auto JackRobinson'
Oct 30 18:08:41 woollyrat NetworkManager: <info>  (eth1): device state change: 3 -> 4 (reason 0)
Oct 30 18:08:41 woollyrat NetworkManager: <info>  Activation (eth1) Stage 1 of 5 (Device Prepare) scheduled...
Oct 30 18:08:41 woollyrat NetworkManager: <info>  Activation (eth1) Stage 1 of 5 (Device Prepare) started...
Oct 30 18:08:41 woollyrat NetworkManager: <info>  Activation (eth1) Stage 2 of 5 (Device Configure) scheduled...
Oct 30 18:08:41 woollyrat NetworkManager: <info>  Activation (eth1) Stage 1 of 5 (Device Prepare) complete.
Oct 30 18:08:41 woollyrat NetworkManager: <info>  Activation (eth1) Stage 2 of 5 (Device Configure) starting...
Oct 30 18:08:41 woollyrat NetworkManager: <info>  (eth1): device state change: 4 -> 5 (reason 0)
Oct 30 18:08:41 woollyrat NetworkManager: <info>  Activation (eth1/wireless): access point 'Auto JackRobinson' has security, but secrets are required.
Oct 30 18:08:41 woollyrat NetworkManager: <info>  (eth1): device state change: 5 -> 6 (reason 0)
Oct 30 18:08:41 woollyrat NetworkManager: <info>  Activation (eth1) Stage 2 of 5 (Device Configure) complete.
Oct 30 18:08:42 woollyrat kernel: [ 1615.126264] input: PS/2 Mouse as /devices/platform/i8042/serio1/input/input17
Oct 30 18:08:42 woollyrat kernel: [ 1615.150267] input: AlpsPS/2 ALPS GlidePoint as /devices/platform/i8042/serio1/input/input18
Oct 30 18:08:43 woollyrat NetworkManager: <info>  Activation (eth1) Stage 1 of 5 (Device Prepare) scheduled...
Oct 30 18:08:43 woollyrat NetworkManager: <info>  Activation (eth1) Stage 1 of 5 (Device Prepare) started...
Oct 30 18:08:43 woollyrat NetworkManager: <info>  (eth1): device state change: 6 -> 4 (reason 0)
Oct 30 18:08:43 woollyrat NetworkManager: <info>  Activation (eth1) Stage 2 of 5 (Device Configure) scheduled...
Oct 30 18:08:43 woollyrat NetworkManager: <info>  Activation (eth1) Stage 1 of 5 (Device Prepare) complete.
Oct 30 18:08:43 woollyrat NetworkManager: <info>  Activation (eth1) Stage 2 of 5 (Device Configure) starting...
Oct 30 18:08:43 woollyrat NetworkManager: <info>  (eth1): device state change: 4 -> 5 (reason 0)
Oct 30 18:08:43 woollyrat NetworkManager: <info>  Activation (eth1/wireless): connection 'Auto JackRobinson' has security, and secrets exist.  No new secrets needed.
Oct 30 18:08:43 woollyrat NetworkManager: <info>  Config: added 'ssid' value 'JackRobinson'
Oct 30 18:08:43 woollyrat NetworkManager: <info>  Config: added 'scan_ssid' value '1'
Oct 30 18:08:43 woollyrat NetworkManager: <info>  Config: added 'key_mgmt' value 'WPA-PSK'
Oct 30 18:08:43 woollyrat NetworkManager: <info>  Config: added 'psk' value '<omitted>'
Oct 30 18:08:43 woollyrat NetworkManager: nm_setting_802_1x_get_pkcs11_engine_path: assertion `NM_IS_SETTING_802_1X (setting)' failed
Oct 30 18:08:43 woollyrat NetworkManager: nm_setting_802_1x_get_pkcs11_module_path: assertion `NM_IS_SETTING_802_1X (setting)' failed
Oct 30 18:08:43 woollyrat NetworkManager: <info>  Activation (eth1) Stage 2 of 5 (Device Configure) complete.
Oct 30 18:08:43 woollyrat NetworkManager: <info>  Config: set interface ap_scan to 1
Oct 30 18:08:43 woollyrat NetworkManager: <info>  (eth1): supplicant connection state:  scanning -> disconnected
Oct 30 18:08:43 woollyrat NetworkManager: <info>  (eth1): supplicant connection state:  disconnected -> scanning
Oct 30 18:08:51 woollyrat kernel: [ 1624.630046] eth1: no IPv6 routers present
Oct 30 18:08:52 woollyrat NetworkManager: <info>  (eth1): supplicant connection state:  scanning -> associating
Oct 30 18:08:52 woollyrat NetworkManager: <info>  (eth1): supplicant connection state:  associating -> 4-way handshake
Oct 30 18:08:52 woollyrat NetworkManager: <info>  (eth1): supplicant connection state:  4-way handshake -> associated
Oct 30 18:08:53 woollyrat NetworkManager: <info>  (eth1): supplicant connection state:  associated -> 4-way handshake
Oct 30 18:08:53 woollyrat NetworkManager: <info>  (eth1): supplicant connection state:  4-way handshake -> group handshake
Oct 30 18:08:53 woollyrat NetworkManager: <info>  (eth1): supplicant connection state:  group handshake -> completed
Oct 30 18:08:53 woollyrat NetworkManager: <info>  Activation (eth1/wireless) Stage 2 of 5 (Device Configure) successful.  Connected to wireless network 'JackRobinson'.
Oct 30 18:08:53 woollyrat NetworkManager: <info>  Activation (eth1) Stage 3 of 5 (IP Configure Start) scheduled.
Oct 30 18:08:53 woollyrat NetworkManager: <info>  Activation (eth1) Stage 3 of 5 (IP Configure Start) started...
Oct 30 18:08:53 woollyrat NetworkManager: <info>  (eth1): device state change: 5 -> 7 (reason 0)
Oct 30 18:08:53 woollyrat NetworkManager: <info>  Activation (eth1) Beginning DHCP transaction (timeout in 45 seconds)
Oct 30 18:08:53 woollyrat dhclient: Internet Systems Consortium DHCP Client V3.1.2
Oct 30 18:08:53 woollyrat dhclient: Copyright 2004-2008 Internet Systems Consortium.
Oct 30 18:08:53 woollyrat dhclient: All rights reserved.
Oct 30 18:08:53 woollyrat dhclient: For info, please visit http://www.isc.org/sw/dhcp/
Oct 30 18:08:53 woollyrat dhclient: 
Oct 30 18:08:53 woollyrat NetworkManager: <info>  dhclient started with pid 6587
Oct 30 18:08:53 woollyrat NetworkManager: <info>  Activation (eth1) Stage 4 of 5 (IP6 Configure Get) scheduled...
Oct 30 18:08:53 woollyrat NetworkManager: <info>  Activation (eth1) Stage 3 of 5 (IP Configure Start) complete.
Oct 30 18:08:53 woollyrat NetworkManager: <info>  Activation (eth1) Stage 4 of 5 (IP6 Configure Get) started...
Oct 30 18:08:53 woollyrat NetworkManager: <info>  Activation (eth1) Stage 4 of 5 (IP6 Configure Get) complete.
Oct 30 18:08:53 woollyrat NetworkManager: <info>  DHCP: device eth1 state changed normal exit -> preinit
Oct 30 18:08:53 woollyrat dhclient: Listening on LPF/eth1/00:25:56:b2:90:38
Oct 30 18:08:53 woollyrat dhclient: Sending on   LPF/eth1/00:25:56:b2:90:38
Oct 30 18:08:53 woollyrat dhclient: Sending on   Socket/fallback
Oct 30 18:08:57 woollyrat dhclient: DHCPREQUEST of 192.168.0.5 on eth1 to 255.255.255.255 port 67
Oct 30 18:08:57 woollyrat dhclient: DHCPACK of 192.168.0.5 from 192.168.0.1
Oct 30 18:08:57 woollyrat dhclient: bound to 192.168.0.5 -- renewal in 107225 seconds.
Oct 30 18:08:57 woollyrat NetworkManager: <info>  DHCP: device eth1 state changed preinit -> reboot
Oct 30 18:08:57 woollyrat NetworkManager: <info>  Activation (eth1) Stage 4 of 5 (IP4 Configure Get) scheduled...
Oct 30 18:08:57 woollyrat NetworkManager: <info>  Activation (eth1) Stage 4 of 5 (IP4 Configure Get) started...
Oct 30 18:08:57 woollyrat NetworkManager: <info>    address 192.168.0.5
Oct 30 18:08:57 woollyrat NetworkManager: <info>    prefix 24 (255.255.255.0)
Oct 30 18:08:57 woollyrat NetworkManager: <info>    gateway 192.168.0.1
Oct 30 18:08:57 woollyrat NetworkManager: <info>    nameserver '208.67.222.222'
Oct 30 18:08:57 woollyrat NetworkManager: <info>    nameserver '212.139.132.6'
Oct 30 18:08:57 woollyrat NetworkManager: <info>  Activation (eth1) Stage 5 of 5 (IP Configure Commit) scheduled...
Oct 30 18:08:57 woollyrat NetworkManager: <info>  Activation (eth1) Stage 4 of 5 (IP4 Configure Get) complete.
Oct 30 18:08:57 woollyrat NetworkManager: <info>  Activation (eth1) Stage 5 of 5 (IP Configure Commit) started...
Oct 30 18:08:58 woollyrat NetworkManager: <info>  (eth1): device state change: 7 -> 8 (reason 0)
Oct 30 18:08:58 woollyrat NetworkManager: <info>  Policy set 'Auto JackRobinson' (eth1) as default for routing and DNS.
Oct 30 18:08:58 woollyrat NetworkManager: <info>  Activation (eth1) successful, device activated.
Oct 30 18:08:58 woollyrat NetworkManager: <info>  Activation (eth1) Stage 5 of 5 (IP Configure Commit) complete.