[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.32-22-generic-pae (buildd@palmer) (gcc version 4.4.3 (Ubuntu 4.4.3-4ubuntu5) ) #36-Ubuntu SMP Thu Jun 3 23:14:23 UTC 2010 (Ubuntu 2.6.32-22.36-generic-pae 2.6.32.11+drm33.2) [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] NSC Geode by NSC [ 0.000000] Cyrix CyrixInstead [ 0.000000] Centaur CentaurHauls [ 0.000000] Transmeta GenuineTMx86 [ 0.000000] Transmeta TransmetaCPU [ 0.000000] UMC UMC UMC UMC [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009e000 (usable) [ 0.000000] BIOS-e820: 000000000009e000 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 00000000be89b000 (usable) [ 0.000000] BIOS-e820: 00000000be89b000 - 00000000be89e000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000be89e000 - 00000000bfca8000 (usable) [ 0.000000] BIOS-e820: 00000000bfca8000 - 00000000bfcbf000 (reserved) [ 0.000000] BIOS-e820: 00000000bfcbf000 - 00000000bfd86000 (usable) [ 0.000000] BIOS-e820: 00000000bfd86000 - 00000000bfdbf000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000bfdbf000 - 00000000bfde1000 (usable) [ 0.000000] BIOS-e820: 00000000bfde1000 - 00000000bfdf6000 (ACPI data) [ 0.000000] BIOS-e820: 00000000bfdf6000 - 00000000bfe00000 (usable) [ 0.000000] BIOS-e820: 00000000bfe00000 - 00000000c0000000 (reserved) [ 0.000000] BIOS-e820: 00000000f8000000 - 00000000fc000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) [ 0.000000] BIOS-e820: 00000000fed10000 - 00000000fed14000 (reserved) [ 0.000000] BIOS-e820: 00000000fed18000 - 00000000fed1a000 (reserved) [ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved) [ 0.000000] BIOS-e820: 0000000100000000 - 0000000140000000 (usable) [ 0.000000] DMI 2.4 present. [ 0.000000] last_pfn = 0x140000 max_arch_pfn = 0x1000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000 mask F80000000 write-back [ 0.000000] 1 base 0FFFE0000 mask FFFFE0000 write-protect [ 0.000000] 2 base 0FFFD8000 mask FFFFF8000 write-protect [ 0.000000] 3 base 080000000 mask FC0000000 write-back [ 0.000000] 4 disabled [ 0.000000] 5 base 100000000 mask FC0000000 write-back [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] e820 update range: 0000000000002000 - 0000000000006000 (usable) ==> (reserved) [ 0.000000] Scanning 1 areas for low memory corruption [ 0.000000] modified physical RAM map: [ 0.000000] modified: 0000000000000000 - 0000000000002000 (usable) [ 0.000000] modified: 0000000000002000 - 0000000000006000 (reserved) [ 0.000000] modified: 0000000000006000 - 000000000009e000 (usable) [ 0.000000] modified: 000000000009e000 - 00000000000a0000 (reserved) [ 0.000000] modified: 00000000000e0000 - 0000000000100000 (reserved) [ 0.000000] modified: 0000000000100000 - 00000000be89b000 (usable) [ 0.000000] modified: 00000000be89b000 - 00000000be89e000 (ACPI NVS) [ 0.000000] modified: 00000000be89e000 - 00000000bfca8000 (usable) [ 0.000000] modified: 00000000bfca8000 - 00000000bfcbf000 (reserved) [ 0.000000] modified: 00000000bfcbf000 - 00000000bfd86000 (usable) [ 0.000000] modified: 00000000bfd86000 - 00000000bfdbf000 (ACPI NVS) [ 0.000000] modified: 00000000bfdbf000 - 00000000bfde1000 (usable) [ 0.000000] modified: 00000000bfde1000 - 00000000bfdf6000 (ACPI data) [ 0.000000] modified: 00000000bfdf6000 - 00000000bfe00000 (usable) [ 0.000000] modified: 00000000bfe00000 - 00000000c0000000 (reserved) [ 0.000000] modified: 00000000f8000000 - 00000000fc000000 (reserved) [ 0.000000] modified: 00000000fec00000 - 00000000fec01000 (reserved) [ 0.000000] modified: 00000000fed10000 - 00000000fed14000 (reserved) [ 0.000000] modified: 00000000fed18000 - 00000000fed1a000 (reserved) [ 0.000000] modified: 00000000fed1c000 - 00000000fed20000 (reserved) [ 0.000000] modified: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] modified: 00000000fff00000 - 0000000100000000 (reserved) [ 0.000000] modified: 0000000100000000 - 0000000140000000 (usable) [ 0.000000] initial memory mapped : 0 - 00e00000 [ 0.000000] init_memory_mapping: 0000000000000000-00000000379fe000 [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] 0000000000 - 0000200000 page 4k [ 0.000000] 0000200000 - 0037800000 page 2M [ 0.000000] 0037800000 - 00379fe000 page 4k [ 0.000000] kernel direct mapping tables up to 379fe000 @ 7000-d000 [ 0.000000] RAMDISK: 37338000 - 37fefbdd [ 0.000000] Allocated new RAMDISK: 00938000 - 015efbdd [ 0.000000] Move RAMDISK from 0000000037338000 - 0000000037fefbdc to 00938000 - 015efbdc [ 0.000000] ACPI: RSDP 000fe020 00024 (v02 HPQOEM) [ 0.000000] ACPI: XSDT bfdf5120 00064 (v01 HPQOEM SLIC-MPC 00000001 01000013) [ 0.000000] ACPI: FACP bfdf4000 000F4 (v04 HPQOEM SLIC-MPC 00000001 MSFT 01000013) [ 0.000000] ACPI: DSDT bfde4000 0B969 (v01 HPQOEM SLIC-MPC 00000001 MSFT 01000013) [ 0.000000] ACPI: FACS bfd92000 00040 [ 0.000000] ACPI: HPET bfdf3000 00038 (v01 HPQOEM SLIC-MPC 00000001 MSFT 01000013) [ 0.000000] ACPI: APIC bfdf2000 0006C (v02 HPQOEM SLIC-MPC 00000001 MSFT 01000013) [ 0.000000] ACPI: MCFG bfdf1000 0003C (v01 HPQOEM SLIC-MPC 00000001 MSFT 01000013) [ 0.000000] ACPI: ASF! bfdf0000 000A5 (v32 HPQOEM SLIC-MPC 00000001 MSFT 01000013) [ 0.000000] ACPI: SLIC bfde3000 00176 (v01 HPQOEM SLIC-MPC 06040000 LTP 00000001) [ 0.000000] ACPI: BOOT bfde2000 00028 (v01 HPQOEM SLIC-MPC 00000001 MSFT 01000013) [ 0.000000] ACPI: SSDT bfde1000 00655 (v01 PmRef CpuPm 00003000 INTL 20051117) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] 4230MB HIGHMEM available. [ 0.000000] 889MB LOWMEM available. [ 0.000000] mapped low ram: 0 - 379fe000 [ 0.000000] low ram: 0 - 379fe000 [ 0.000000] node 0 low ram: 00000000 - 379fe000 [ 0.000000] node 0 bootmap 00009000 - 0000ff40 [ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 00379fe000] [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] [ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000] [ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000] [ 0.000000] #3 [0000100000 - 000092f7d8] TEXT DATA BSS ==> [0000100000 - 000092f7d8] [ 0.000000] #4 [000009e000 - 0000100000] BIOS reserved ==> [000009e000 - 0000100000] [ 0.000000] #5 [0000930000 - 0000937194] BRK ==> [0000930000 - 0000937194] [ 0.000000] #6 [0000007000 - 0000009000] PGTABLE ==> [0000007000 - 0000009000] [ 0.000000] #7 [0000938000 - 00015efbdd] NEW RAMDISK ==> [0000938000 - 00015efbdd] [ 0.000000] #8 [0000009000 - 0000010000] BOOTMAP ==> [0000009000 - 0000010000] [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000000 -> 0x00001000 [ 0.000000] Normal 0x00001000 -> 0x000379fe [ 0.000000] HighMem 0x000379fe -> 0x00140000 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[8] active PFN ranges [ 0.000000] 0: 0x00000000 -> 0x00000002 [ 0.000000] 0: 0x00000006 -> 0x0000009e [ 0.000000] 0: 0x00000100 -> 0x000be89b [ 0.000000] 0: 0x000be89e -> 0x000bfca8 [ 0.000000] 0: 0x000bfcbf -> 0x000bfd86 [ 0.000000] 0: 0x000bfdbf -> 0x000bfde1 [ 0.000000] 0: 0x000bfdf6 -> 0x000bfe00 [ 0.000000] 0: 0x00100000 -> 0x00140000 [ 0.000000] On node 0 totalpages: 1047858 [ 0.000000] free_area_init_node: node 0, pgdat c07d4d20, node_mem_map c15f1000 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 3962 pages, LIFO batch:0 [ 0.000000] Normal zone: 1748 pages used for memmap [ 0.000000] Normal zone: 221994 pages, LIFO batch:31 [ 0.000000] HighMem zone: 8461 pages used for memmap [ 0.000000] HighMem zone: 811661 pages, LIFO batch:31 [ 0.000000] Using APIC driver default [ 0.000000] ACPI: PM-Timer IO Port: 0x408 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x00] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x00] disabled) [ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 4, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] SMP: Allowing 4 CPUs, 2 hotplug CPUs [ 0.000000] nr_irqs_gsi: 24 [ 0.000000] PM: Registered nosave memory: 0000000000002000 - 0000000000006000 [ 0.000000] PM: Registered nosave memory: 000000000009e000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000 [ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000 [ 0.000000] Allocating PCI resources starting at c0000000 (gap: c0000000:38000000) [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:4 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 15 pages/cpu @c4000000 s39448 r0 d21992 u524288 [ 0.000000] pcpu-alloc: s39448 r0 d21992 u524288 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1037617 [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-22-generic-pae root=UUID=b62b5e20-fc9d-4c52-bde0-8d9a359f2b97 ro splash quiet splash nomodeset video=uvesafb:mode_option=640x400-24,mtrr=3,scroll=ywrap [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Enabling fast FPU save and restore... done. [ 0.000000] Enabling unmasked SIMD FPU exception support... done. [ 0.000000] Initializing CPU#0 [ 0.000000] allocated 26214400 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] Initializing HighMem for node 0 (000379fe:00140000) [ 0.000000] Memory: 4101116k/5242880k available (4826k kernel code, 89136k reserved, 2211k data, 672k init, 3280488k highmem) [ 0.000000] virtual kernel memory layout: [ 0.000000] fixmap : 0xfff1d000 - 0xfffff000 ( 904 kB) [ 0.000000] pkmap : 0xffa00000 - 0xffc00000 (2048 kB) [ 0.000000] vmalloc : 0xf81fe000 - 0xff9fe000 ( 120 MB) [ 0.000000] lowmem : 0xc0000000 - 0xf79fe000 ( 889 MB) [ 0.000000] .init : 0xc07e0000 - 0xc0888000 ( 672 kB) [ 0.000000] .data : 0xc05b6a5b - 0xc07df7a8 (2211 kB) [ 0.000000] .text : 0xc0100000 - 0xc05b6a5b (4826 kB) [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.000000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] NR_IRQS:2304 nr_irqs:440 [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] hpet clockevent registered [ 0.000000] HPET: 4 timers in total, 0 timers will be used for per-cpu timer [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 2527.347 MHz processor. [ 0.004005] Calibrating delay loop (skipped), value calculated using timer frequency.. 5054.69 BogoMIPS (lpj=10109388) [ 0.004018] Security Framework initialized [ 0.004035] AppArmor: AppArmor initialized [ 0.004040] Mount-cache hash table entries: 512 [ 0.004143] Initializing cgroup subsys ns [ 0.004147] Initializing cgroup subsys cpuacct [ 0.004150] Initializing cgroup subsys memory [ 0.004156] Initializing cgroup subsys devices [ 0.004158] Initializing cgroup subsys freezer [ 0.004160] Initializing cgroup subsys net_cls [ 0.004177] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.004179] CPU: L2 cache: 6144K [ 0.004181] CPU: Physical Processor ID: 0 [ 0.004183] CPU: Processor Core ID: 0 [ 0.004186] mce: CPU supports 6 MCE banks [ 0.004193] CPU0: Thermal monitoring enabled (TM1) [ 0.004196] using mwait in idle threads. [ 0.004201] Performance Events: Core2 events, Intel PMU driver. [ 0.004206] ... version: 2 [ 0.004208] ... bit width: 40 [ 0.004209] ... generic registers: 2 [ 0.004210] ... value mask: 000000ffffffffff [ 0.004212] ... max period: 000000007fffffff [ 0.004213] ... fixed-purpose events: 3 [ 0.004215] ... event mask: 0000000700000003 [ 0.004218] Checking 'hlt' instruction... OK. [ 0.022426] ACPI: Core revision 20090903 [ 0.040007] ftrace: converting mcount calls to 0f 1f 44 00 00 [ 0.040010] ftrace: allocating 22402 entries in 44 pages [ 0.044036] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.044338] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.086239] CPU0: Intel(R) Core(TM)2 Duo CPU T9400 @ 2.53GHz stepping 06 [ 0.088001] Booting processor 1 APIC 0x1 ip 0x6000 [ 0.008000] Initializing CPU#1 [ 0.008000] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.008000] CPU: L2 cache: 6144K [ 0.008000] CPU: Physical Processor ID: 0 [ 0.008000] CPU: Processor Core ID: 1 [ 0.008000] CPU1: Thermal monitoring enabled (TM1) [ 0.172075] CPU1: Intel(R) Core(TM)2 Duo CPU T9400 @ 2.53GHz stepping 06 [ 0.172083] checking TSC synchronization [CPU#0 -> CPU#1]: passed. [ 0.176016] Brought up 2 CPUs [ 0.176019] Total of 2 processors activated (10108.66 BogoMIPS). [ 0.176881] CPU0 attaching sched-domain: [ 0.176883] domain 0: span 0-1 level MC [ 0.176885] groups: 0 1 [ 0.176890] CPU1 attaching sched-domain: [ 0.176892] domain 0: span 0-1 level MC [ 0.176894] groups: 1 0 [ 0.176975] devtmpfs: initialized [ 0.176975] regulator: core version 0.5 [ 0.176975] Time: 14:23:07 Date: 06/15/10 [ 0.176975] NET: Registered protocol family 16 [ 0.176975] Trying to unpack rootfs image as initramfs... [ 0.176975] EISA bus registered [ 0.176975] ACPI: bus type pci registered [ 0.176975] PCI: MCFG configuration 0: base f8000000 segment 0 buses 0 - 63 [ 0.176975] PCI: MCFG area at f8000000 reserved in E820 [ 0.176975] PCI: Using MMCONFIG for extended config space [ 0.176975] PCI: Using configuration type 1 for base access [ 0.180076] bio: create slab at 0 [ 0.181284] ACPI: EC: Look up EC in DSDT [ 0.183301] ACPI: Executed 1 blocks of module-level executable AML code [ 0.184383] ACPI: BIOS _OSI(Linux) query ignored [ 0.316563] ACPI: Interpreter enabled [ 0.316563] ACPI: (supports S0 S3 S4 S5) [ 0.316563] ACPI: Using IOAPIC for interrupt routing [ 0.325121] ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62 [ 0.325382] ACPI: No dock devices found. [ 0.325941] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 0.326039] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold [ 0.326042] pci 0000:00:01.0: PME# disabled [ 0.326126] pci 0000:00:1a.0: reg 20 io port: [0xa0e0-0xa0ff] [ 0.326211] pci 0000:00:1a.1: reg 20 io port: [0xa0c0-0xa0df] [ 0.326298] pci 0000:00:1a.7: reg 10 32bit mmio: [0xdf305c00-0xdf305fff] [ 0.326363] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold [ 0.326367] pci 0000:00:1a.7: PME# disabled [ 0.326415] pci 0000:00:1b.0: reg 10 64bit mmio: [0xdf300000-0xdf303fff] [ 0.326465] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.326469] pci 0000:00:1b.0: PME# disabled [ 0.326545] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.326548] pci 0000:00:1c.0: PME# disabled [ 0.326627] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold [ 0.326631] pci 0000:00:1c.1: PME# disabled [ 0.326709] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold [ 0.326713] pci 0000:00:1c.2: PME# disabled [ 0.326791] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold [ 0.326795] pci 0000:00:1c.3: PME# disabled [ 0.326874] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold [ 0.326878] pci 0000:00:1c.4: PME# disabled [ 0.326956] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold [ 0.326960] pci 0000:00:1c.5: PME# disabled [ 0.327026] pci 0000:00:1d.0: reg 20 io port: [0xa0a0-0xa0bf] [ 0.327109] pci 0000:00:1d.1: reg 20 io port: [0xa080-0xa09f] [ 0.327191] pci 0000:00:1d.2: reg 20 io port: [0xa060-0xa07f] [ 0.327273] pci 0000:00:1d.3: reg 20 io port: [0xa040-0xa05f] [ 0.327357] pci 0000:00:1d.7: reg 10 32bit mmio: [0xdf305800-0xdf305bff] [ 0.327422] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold [ 0.327426] pci 0000:00:1d.7: PME# disabled [ 0.327639] pci 0000:00:1f.2: reg 10 io port: [0xa108-0xa10f] [ 0.327645] pci 0000:00:1f.2: reg 14 io port: [0xa114-0xa117] [ 0.327652] pci 0000:00:1f.2: reg 18 io port: [0xa100-0xa107] [ 0.327658] pci 0000:00:1f.2: reg 1c io port: [0xa110-0xa113] [ 0.327664] pci 0000:00:1f.2: reg 20 io port: [0xa020-0xa03f] [ 0.327670] pci 0000:00:1f.2: reg 24 32bit mmio: [0xdf305000-0xdf3057ff] [ 0.327709] pci 0000:00:1f.2: PME# supported from D3hot [ 0.327712] pci 0000:00:1f.2: PME# disabled [ 0.327746] pci 0000:00:1f.3: reg 10 64bit mmio: [0xdf306000-0xdf3060ff] [ 0.327762] pci 0000:00:1f.3: reg 20 io port: [0xa000-0xa01f] [ 0.327821] pci 0000:00:1f.6: reg 10 64bit mmio: [0xdf304000-0xdf304fff] [ 0.327983] pci 0000:01:00.0: reg 10 32bit mmio: [0xd2000000-0xd2ffffff] [ 0.328014] pci 0000:01:00.0: reg 14 64bit mmio pref: [0xc0000000-0xcfffffff] [ 0.328041] pci 0000:01:00.0: reg 1c 64bit mmio: [0xd0000000-0xd1ffffff] [ 0.328055] pci 0000:01:00.0: reg 24 io port: [0x9000-0x907f] [ 0.328069] pci 0000:01:00.0: reg 30 32bit mmio pref: [0xfff80000-0xffffffff] [ 0.328222] pci 0000:00:01.0: bridge io port: [0x9000-0x9fff] [ 0.328225] pci 0000:00:01.0: bridge 32bit mmio: [0xd0000000-0xd2ffffff] [ 0.328229] pci 0000:00:01.0: bridge 64bit mmio pref: [0xc0000000-0xcfffffff] [ 0.328308] pci 0000:02:00.0: reg 10 64bit mmio: [0xde200000-0xde201fff] [ 0.328411] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold [ 0.328417] pci 0000:02:00.0: PME# disabled [ 0.328487] pci 0000:00:1c.0: bridge io port: [0x8000-0x8fff] [ 0.328491] pci 0000:00:1c.0: bridge 32bit mmio: [0xde200000-0xdf2fffff] [ 0.328497] pci 0000:00:1c.0: bridge 64bit mmio pref: [0xd3000000-0xd3ffffff] [ 0.328548] pci 0000:03:00.0: reg 10 io port: [0x6000-0x60ff] [ 0.328571] pci 0000:03:00.0: reg 18 64bit mmio pref: [0xd4010000-0xd4010fff] [ 0.328586] pci 0000:03:00.0: reg 20 64bit mmio pref: [0xd4000000-0xd400ffff] [ 0.328595] pci 0000:03:00.0: reg 30 32bit mmio pref: [0xffff0000-0xffffffff] [ 0.328640] pci 0000:03:00.0: supports D1 D2 [ 0.328642] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.328647] pci 0000:03:00.0: PME# disabled [ 0.328715] pci 0000:00:1c.1: bridge io port: [0x6000-0x7fff] [ 0.328719] pci 0000:00:1c.1: bridge 32bit mmio: [0xdd200000-0xde1fffff] [ 0.328725] pci 0000:00:1c.1: bridge 64bit mmio pref: [0xd4000000-0xd50fffff] [ 0.328773] pci 0000:00:1c.2: bridge io port: [0x5000-0x5fff] [ 0.328777] pci 0000:00:1c.2: bridge 32bit mmio: [0xdc200000-0xdd1fffff] [ 0.328784] pci 0000:00:1c.2: bridge 64bit mmio pref: [0xd5100000-0xd60fffff] [ 0.328831] pci 0000:00:1c.3: bridge io port: [0x4000-0x4fff] [ 0.328835] pci 0000:00:1c.3: bridge 32bit mmio: [0xdb200000-0xdc1fffff] [ 0.328842] pci 0000:00:1c.3: bridge 64bit mmio pref: [0xd6100000-0xd70fffff] [ 0.328899] pci 0000:06:00.0: reg 10 32bit mmio: [0xda100000-0xda1007ff] [ 0.328910] pci 0000:06:00.0: reg 14 32bit mmio: [0xda100d00-0xda100d7f] [ 0.328940] pci 0000:06:00.0: reg 20 32bit mmio: [0xda100c80-0xda100cff] [ 0.328951] pci 0000:06:00.0: reg 24 32bit mmio: [0xda100c00-0xda100c7f] [ 0.329069] pci 0000:06:00.1: reg 10 32bit mmio: [0xda100b00-0xda100bff] [ 0.329216] pci 0000:06:00.2: reg 10 32bit mmio: [0xda100a00-0xda100aff] [ 0.329364] pci 0000:06:00.3: reg 10 32bit mmio: [0xda100900-0xda1009ff] [ 0.329511] pci 0000:06:00.4: reg 10 32bit mmio: [0xda100800-0xda1008ff] [ 0.329659] pci 0000:00:1c.4: bridge io port: [0x3000-0x3fff] [ 0.329664] pci 0000:00:1c.4: bridge 32bit mmio: [0xda100000-0xdb1fffff] [ 0.329670] pci 0000:00:1c.4: bridge 64bit mmio pref: [0xd7100000-0xd80fffff] [ 0.329717] pci 0000:00:1c.5: bridge io port: [0x2000-0x2fff] [ 0.329721] pci 0000:00:1c.5: bridge 32bit mmio: [0xd9100000-0xda0fffff] [ 0.329727] pci 0000:00:1c.5: bridge 64bit mmio pref: [0xd8100000-0xd90fffff] [ 0.329782] pci 0000:00:1e.0: transparent bridge [ 0.329828] pci_bus 0000:00: on NUMA node 0 [ 0.329834] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.330081] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEGP._PRT] [ 0.330157] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P32_._PRT] [ 0.330285] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP1._PRT] [ 0.330366] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP2._PRT] [ 0.330455] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP3._PRT] [ 0.330536] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP4._PRT] [ 0.330616] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP5._PRT] [ 0.330740] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP6._PRT] [ 0.336591] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 10 *11 12) [ 0.336710] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 9 10 *11 12) [ 0.336826] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 9 10 *11 12) [ 0.336942] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 10 *11 12) [ 0.337058] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 10 *11 12) [ 0.337174] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 *10 11 12) [ 0.337289] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 9 10 *11 12) [ 0.337405] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 9 10 11 12) *0, disabled. [ 0.337528] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none [ 0.337534] vgaarb: loaded [ 0.337633] SCSI subsystem initialized [ 0.337711] libata version 3.00 loaded. [ 0.337767] usbcore: registered new interface driver usbfs [ 0.337776] usbcore: registered new interface driver hub [ 0.337796] usbcore: registered new device driver usb [ 0.337925] ACPI: WMI: Mapper loaded [ 0.337927] PCI: Using ACPI for IRQ routing [ 0.338137] NetLabel: Initializing [ 0.338138] NetLabel: domain hash size = 128 [ 0.338139] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.338150] NetLabel: unlabeled traffic allowed by default [ 0.338178] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0 [ 0.338182] hpet0: 4 comparators, 64-bit 14.318180 MHz counter [ 0.344179] Switching to clocksource tsc [ 0.345828] AppArmor: AppArmor Filesystem Enabled [ 0.345837] pnp: PnP ACPI init [ 0.345844] ACPI: bus type pnp registered [ 0.348059] alloc irq_desc for 23 on node -1 [ 0.348061] alloc kstat_irqs on node -1 [ 0.348362] pnp: PnP ACPI: found 12 devices [ 0.348364] ACPI: ACPI bus type pnp unregistered [ 0.348366] PnPBIOS: Disabled by ACPI PNP [ 0.348377] system 00:00: iomem range 0xf8000000-0xfbffffff has been reserved [ 0.348382] system 00:02: ioport range 0x164e-0x164f has been reserved [ 0.348385] system 00:02: ioport range 0x600-0x60f has been reserved [ 0.348387] system 00:02: ioport range 0x610-0x610 has been reserved [ 0.348389] system 00:02: ioport range 0x800-0x80f has been reserved [ 0.348392] system 00:02: ioport range 0x810-0x817 has been reserved [ 0.348394] system 00:02: ioport range 0x820-0x823 has been reserved [ 0.348396] system 00:02: ioport range 0x400-0x47f has been reserved [ 0.348398] system 00:02: ioport range 0x500-0x53f has been reserved [ 0.348400] system 00:02: ioport range 0x380-0x383 has been reserved [ 0.348403] system 00:02: iomem range 0xf8000000-0xfbffffff has been reserved [ 0.348406] system 00:02: iomem range 0xfed1c000-0xfed1ffff has been reserved [ 0.348408] system 00:02: iomem range 0xfed10000-0xfed13fff has been reserved [ 0.348411] system 00:02: iomem range 0xfed18000-0xfed18fff has been reserved [ 0.348413] system 00:02: iomem range 0xfed19000-0xfed19fff has been reserved [ 0.348416] system 00:02: iomem range 0xfec00000-0xfec00fff could not be reserved [ 0.348418] system 00:02: iomem range 0xfed20000-0xfed3ffff has been reserved [ 0.348421] system 00:02: iomem range 0xfed40000-0xfed44fff has been reserved [ 0.348423] system 00:02: iomem range 0xfed45000-0xfed8ffff has been reserved [ 0.348426] system 00:02: iomem range 0xfee00000-0xfee00fff has been reserved [ 0.383075] pci 0000:01:00.0: BAR 6: no parent found for of device [0xfff80000-0xffffffff] [ 0.383080] pci 0000:03:00.0: BAR 6: no parent found for of device [0xffff0000-0xffffffff] [ 0.383151] pci 0000:01:00.0: BAR 6: can't allocate mem resource [0xd0000000-0xcfffffff] [ 0.383153] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01 [ 0.383156] pci 0000:00:01.0: IO window: 0x9000-0x9fff [ 0.383159] pci 0000:00:01.0: MEM window: 0xd0000000-0xd2ffffff [ 0.383162] pci 0000:00:01.0: PREFETCH window: 0x000000c0000000-0x000000cfffffff [ 0.383166] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:02 [ 0.383169] pci 0000:00:1c.0: IO window: 0x8000-0x8fff [ 0.383174] pci 0000:00:1c.0: MEM window: 0xde200000-0xdf2fffff [ 0.383178] pci 0000:00:1c.0: PREFETCH window: 0x000000d3000000-0x000000d3ffffff [ 0.383185] pci 0000:00:1c.1: PCI bridge, secondary bus 0000:03 [ 0.383188] pci 0000:00:1c.1: IO window: 0x6000-0x7fff [ 0.383193] pci 0000:00:1c.1: MEM window: 0xdd200000-0xde1fffff [ 0.383198] pci 0000:00:1c.1: PREFETCH window: 0x000000d4000000-0x000000d50fffff [ 0.383204] pci 0000:00:1c.2: PCI bridge, secondary bus 0000:04 [ 0.383207] pci 0000:00:1c.2: IO window: 0x5000-0x5fff [ 0.383212] pci 0000:00:1c.2: MEM window: 0xdc200000-0xdd1fffff [ 0.383216] pci 0000:00:1c.2: PREFETCH window: 0x000000d5100000-0x000000d60fffff [ 0.383222] pci 0000:00:1c.3: PCI bridge, secondary bus 0000:05 [ 0.383225] pci 0000:00:1c.3: IO window: 0x4000-0x4fff [ 0.383230] pci 0000:00:1c.3: MEM window: 0xdb200000-0xdc1fffff [ 0.383234] pci 0000:00:1c.3: PREFETCH window: 0x000000d6100000-0x000000d70fffff [ 0.383242] pci 0000:00:1c.4: PCI bridge, secondary bus 0000:06 [ 0.383245] pci 0000:00:1c.4: IO window: 0x3000-0x3fff [ 0.383250] pci 0000:00:1c.4: MEM window: 0xda100000-0xdb1fffff [ 0.383254] pci 0000:00:1c.4: PREFETCH window: 0x000000d7100000-0x000000d80fffff [ 0.383260] pci 0000:00:1c.5: PCI bridge, secondary bus 0000:07 [ 0.383263] pci 0000:00:1c.5: IO window: 0x2000-0x2fff [ 0.383268] pci 0000:00:1c.5: MEM window: 0xd9100000-0xda0fffff [ 0.383272] pci 0000:00:1c.5: PREFETCH window: 0x000000d8100000-0x000000d90fffff [ 0.383278] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:0a [ 0.383280] pci 0000:00:1e.0: IO window: disabled [ 0.383285] pci 0000:00:1e.0: MEM window: disabled [ 0.383288] pci 0000:00:1e.0: PREFETCH window: disabled [ 0.383304] alloc irq_desc for 16 on node -1 [ 0.383305] alloc kstat_irqs on node -1 [ 0.383311] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.383315] pci 0000:00:01.0: setting latency timer to 64 [ 0.383323] alloc irq_desc for 17 on node -1 [ 0.383324] alloc kstat_irqs on node -1 [ 0.383327] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 0.383331] pci 0000:00:1c.0: setting latency timer to 64 [ 0.383340] pci 0000:00:1c.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16 [ 0.383344] pci 0000:00:1c.1: setting latency timer to 64 [ 0.383352] pci 0000:00:1c.2: enabling device (0000 -> 0003) [ 0.383355] alloc irq_desc for 18 on node -1 [ 0.383356] alloc kstat_irqs on node -1 [ 0.383359] pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 0.383364] pci 0000:00:1c.2: setting latency timer to 64 [ 0.383372] pci 0000:00:1c.3: enabling device (0000 -> 0003) [ 0.383375] alloc irq_desc for 19 on node -1 [ 0.383377] alloc kstat_irqs on node -1 [ 0.383379] pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19 [ 0.383385] pci 0000:00:1c.3: setting latency timer to 64 [ 0.383393] pci 0000:00:1c.4: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 0.383397] pci 0000:00:1c.4: setting latency timer to 64 [ 0.383406] pci 0000:00:1c.5: PCI INT B -> GSI 16 (level, low) -> IRQ 16 [ 0.383410] pci 0000:00:1c.5: setting latency timer to 64 [ 0.383416] pci 0000:00:1e.0: setting latency timer to 64 [ 0.383420] pci_bus 0000:00: resource 0 io: [0x00-0xffff] [ 0.383422] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff] [ 0.383424] pci_bus 0000:01: resource 0 io: [0x9000-0x9fff] [ 0.383426] pci_bus 0000:01: resource 1 mem: [0xd0000000-0xd2ffffff] [ 0.383428] pci_bus 0000:01: resource 2 pref mem [0xc0000000-0xcfffffff] [ 0.383430] pci_bus 0000:02: resource 0 io: [0x8000-0x8fff] [ 0.383432] pci_bus 0000:02: resource 1 mem: [0xde200000-0xdf2fffff] [ 0.383434] pci_bus 0000:02: resource 2 pref mem [0xd3000000-0xd3ffffff] [ 0.383436] pci_bus 0000:03: resource 0 io: [0x6000-0x7fff] [ 0.383438] pci_bus 0000:03: resource 1 mem: [0xdd200000-0xde1fffff] [ 0.383440] pci_bus 0000:03: resource 2 pref mem [0xd4000000-0xd50fffff] [ 0.383442] pci_bus 0000:04: resource 0 io: [0x5000-0x5fff] [ 0.383444] pci_bus 0000:04: resource 1 mem: [0xdc200000-0xdd1fffff] [ 0.383446] pci_bus 0000:04: resource 2 pref mem [0xd5100000-0xd60fffff] [ 0.383448] pci_bus 0000:05: resource 0 io: [0x4000-0x4fff] [ 0.383450] pci_bus 0000:05: resource 1 mem: [0xdb200000-0xdc1fffff] [ 0.383452] pci_bus 0000:05: resource 2 pref mem [0xd6100000-0xd70fffff] [ 0.383454] pci_bus 0000:06: resource 0 io: [0x3000-0x3fff] [ 0.383456] pci_bus 0000:06: resource 1 mem: [0xda100000-0xdb1fffff] [ 0.383458] pci_bus 0000:06: resource 2 pref mem [0xd7100000-0xd80fffff] [ 0.383460] pci_bus 0000:07: resource 0 io: [0x2000-0x2fff] [ 0.383462] pci_bus 0000:07: resource 1 mem: [0xd9100000-0xda0fffff] [ 0.383464] pci_bus 0000:07: resource 2 pref mem [0xd8100000-0xd90fffff] [ 0.383466] pci_bus 0000:0a: resource 3 io: [0x00-0xffff] [ 0.383468] pci_bus 0000:0a: resource 4 mem: [0x000000-0xffffffffffffffff] [ 0.383500] NET: Registered protocol family 2 [ 0.383585] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.383850] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.384250] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 0.384447] TCP: Hash tables configured (established 131072 bind 65536) [ 0.384449] TCP reno registered [ 0.384506] NET: Registered protocol family 1 [ 0.384883] pci 0000:01:00.0: Boot video device [ 0.384908] Simple Boot Flag value 0x5 read from CMOS RAM was invalid [ 0.384910] Simple Boot Flag at 0x44 set to 0x1 [ 0.385049] cpufreq-nforce2: No nForce2 chipset. [ 0.385070] Scanning for low memory corruption every 60 seconds [ 0.385150] audit: initializing netlink socket (disabled) [ 0.385157] type=2000 audit(1276611787.383:1): initialized [ 0.393466] highmem bounce pool size: 64 pages [ 0.393470] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.394620] VFS: Disk quotas dquot_6.5.2 [ 0.394665] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.395117] fuse init (API version 7.13) [ 0.395185] msgmni has been set to 1605 [ 0.395352] alg: No test for stdrng (krng) [ 0.395397] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 0.395400] io scheduler noop registered [ 0.395401] io scheduler anticipatory registered [ 0.395403] io scheduler deadline registered [ 0.395434] io scheduler cfq registered (default) [ 0.395560] alloc irq_desc for 24 on node -1 [ 0.395562] alloc kstat_irqs on node -1 [ 0.395568] pcieport 0000:00:01.0: irq 24 for MSI/MSI-X [ 0.395574] pcieport 0000:00:01.0: setting latency timer to 64 [ 0.395686] alloc irq_desc for 25 on node -1 [ 0.395687] alloc kstat_irqs on node -1 [ 0.395694] pcieport 0000:00:1c.0: irq 25 for MSI/MSI-X [ 0.395702] pcieport 0000:00:1c.0: setting latency timer to 64 [ 0.395827] alloc irq_desc for 26 on node -1 [ 0.395828] alloc kstat_irqs on node -1 [ 0.395835] pcieport 0000:00:1c.1: irq 26 for MSI/MSI-X [ 0.395844] pcieport 0000:00:1c.1: setting latency timer to 64 [ 0.395968] alloc irq_desc for 27 on node -1 [ 0.395969] alloc kstat_irqs on node -1 [ 0.395976] pcieport 0000:00:1c.2: irq 27 for MSI/MSI-X [ 0.395985] pcieport 0000:00:1c.2: setting latency timer to 64 [ 0.396105] alloc irq_desc for 28 on node -1 [ 0.396107] alloc kstat_irqs on node -1 [ 0.396114] pcieport 0000:00:1c.3: irq 28 for MSI/MSI-X [ 0.396122] pcieport 0000:00:1c.3: setting latency timer to 64 [ 0.396245] alloc irq_desc for 29 on node -1 [ 0.396247] alloc kstat_irqs on node -1 [ 0.396253] pcieport 0000:00:1c.4: irq 29 for MSI/MSI-X [ 0.396262] pcieport 0000:00:1c.4: setting latency timer to 64 [ 0.396385] alloc irq_desc for 30 on node -1 [ 0.396387] alloc kstat_irqs on node -1 [ 0.396393] pcieport 0000:00:1c.5: irq 30 for MSI/MSI-X [ 0.396402] pcieport 0000:00:1c.5: setting latency timer to 64 [ 0.396490] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.396510] Firmware did not grant requested _OSC control [ 0.396535] Firmware did not grant requested _OSC control [ 0.396554] Firmware did not grant requested _OSC control [ 0.396573] Firmware did not grant requested _OSC control [ 0.396592] Firmware did not grant requested _OSC control [ 0.396610] Firmware did not grant requested _OSC control [ 0.396629] Firmware did not grant requested _OSC control [ 0.396659] Firmware did not grant requested _OSC control [ 0.396678] Firmware did not grant requested _OSC control [ 0.396697] Firmware did not grant requested _OSC control [ 0.396715] Firmware did not grant requested _OSC control [ 0.396734] Firmware did not grant requested _OSC control [ 0.396752] Firmware did not grant requested _OSC control [ 0.396771] Firmware did not grant requested _OSC control [ 0.396789] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 0.397297] ACPI: AC Adapter [ACAD] (off-line) [ 0.397365] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 [ 0.397368] ACPI: Power Button [PWRB] [ 0.397401] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input1 [ 0.397689] ACPI: Lid Switch [LID0] [ 0.397723] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2 [ 0.397725] ACPI: Sleep Button [SLPB] [ 0.397772] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3 [ 0.397774] ACPI: Power Button [PWRF] [ 0.398599] ACPI: SSDT bfcb4c18 00265 (v01 PmRef Cpu0Ist 00003000 INTL 20051117) [ 0.399132] ACPI: SSDT bfcb2598 00537 (v01 PmRef Cpu0Cst 00003001 INTL 20051117) [ 0.399557] Monitor-Mwait will be used to enter C-1 state [ 0.399578] Monitor-Mwait will be used to enter C-2 state [ 0.399598] Monitor-Mwait will be used to enter C-3 state [ 0.399603] Marking TSC unstable due to TSC halts in idle [ 0.399646] processor LNXCPU:00: registered as cooling_device0 [ 0.400071] ACPI: SSDT bfcb3e18 001CF (v01 PmRef ApIst 00003000 INTL 20051117) [ 0.400499] ACPI: SSDT bfcb4f18 0008D (v01 PmRef ApCst 00003000 INTL 20051117) [ 0.400861] Switching to clocksource hpet [ 0.408800] processor LNXCPU:01: registered as cooling_device1 [ 0.412973] ACPI Exception: AE_OK, No or invalid critical threshold (20090903/thermal-386) [ 0.414194] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.415292] brd: module loaded [ 0.415674] loop: module loaded [ 0.415738] input: Macintosh mouse button emulation as /devices/virtual/input/input4 [ 0.416096] Fixed MDIO Bus: probed [ 0.416121] PPP generic driver version 2.4.2 [ 0.416148] tun: Universal TUN/TAP device driver, 1.6 [ 0.416150] tun: (C) 1999-2004 Max Krasnyansky [ 0.416218] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.416237] ehci_hcd 0000:00:1a.7: PCI INT D -> GSI 19 (level, low) -> IRQ 19 [ 0.416248] ehci_hcd 0000:00:1a.7: setting latency timer to 64 [ 0.416251] ehci_hcd 0000:00:1a.7: EHCI Host Controller [ 0.416277] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1 [ 0.416304] ehci_hcd 0000:00:1a.7: debug port 1 [ 0.420185] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported [ 0.420198] ehci_hcd 0000:00:1a.7: irq 19, io mem 0xdf305c00 [ 0.424116] isapnp: Scanning for PnP cards... [ 0.428051] Freeing initrd memory: 13022k freed [ 0.473104] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00 [ 0.473235] usb usb1: configuration #1 chosen from 1 choice [ 0.473260] hub 1-0:1.0: USB hub found [ 0.473270] hub 1-0:1.0: 4 ports detected [ 0.473328] alloc irq_desc for 20 on node -1 [ 0.473330] alloc kstat_irqs on node -1 [ 0.473336] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 20 (level, low) -> IRQ 20 [ 0.473358] ehci_hcd 0000:00:1d.7: setting latency timer to 64 [ 0.473361] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 0.473396] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2 [ 0.473421] ehci_hcd 0000:00:1d.7: debug port 1 [ 0.477313] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported [ 0.477328] ehci_hcd 0000:00:1d.7: irq 20, io mem 0xdf305800 [ 0.492010] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 0.492074] usb usb2: configuration #1 chosen from 1 choice [ 0.492094] hub 2-0:1.0: USB hub found [ 0.492099] hub 2-0:1.0: 8 ports detected [ 0.492158] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.492175] uhci_hcd: USB Universal Host Controller Interface driver [ 0.492211] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.492218] uhci_hcd 0000:00:1a.0: setting latency timer to 64 [ 0.492221] uhci_hcd 0000:00:1a.0: UHCI Host Controller [ 0.492245] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3 [ 0.492273] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000a0e0 [ 0.492343] usb usb3: configuration #1 chosen from 1 choice [ 0.492364] hub 3-0:1.0: USB hub found [ 0.492372] hub 3-0:1.0: 2 ports detected [ 0.492408] alloc irq_desc for 21 on node -1 [ 0.492409] alloc kstat_irqs on node -1 [ 0.492413] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 [ 0.492418] uhci_hcd 0000:00:1a.1: setting latency timer to 64 [ 0.492421] uhci_hcd 0000:00:1a.1: UHCI Host Controller [ 0.492444] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4 [ 0.492474] uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000a0c0 [ 0.492546] usb usb4: configuration #1 chosen from 1 choice [ 0.492569] hub 4-0:1.0: USB hub found [ 0.492574] hub 4-0:1.0: 2 ports detected [ 0.492610] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 [ 0.492615] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [ 0.492618] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 0.492646] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5 [ 0.492668] uhci_hcd 0000:00:1d.0: irq 20, io base 0x0000a0a0 [ 0.492738] usb usb5: configuration #1 chosen from 1 choice [ 0.492758] hub 5-0:1.0: USB hub found [ 0.492763] hub 5-0:1.0: 2 ports detected [ 0.492799] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 0.492804] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [ 0.492807] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 0.492830] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6 [ 0.492852] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000a080 [ 0.492922] usb usb6: configuration #1 chosen from 1 choice [ 0.492941] hub 6-0:1.0: USB hub found [ 0.492947] hub 6-0:1.0: 2 ports detected [ 0.492985] uhci_hcd 0000:00:1d.2: PCI INT D -> GSI 16 (level, low) -> IRQ 16 [ 0.492991] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [ 0.492993] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 0.493017] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7 [ 0.493038] uhci_hcd 0000:00:1d.2: irq 16, io base 0x0000a060 [ 0.493108] usb usb7: configuration #1 chosen from 1 choice [ 0.493127] hub 7-0:1.0: USB hub found [ 0.493132] hub 7-0:1.0: 2 ports detected [ 0.493165] uhci_hcd 0000:00:1d.3: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 0.493170] uhci_hcd 0000:00:1d.3: setting latency timer to 64 [ 0.493173] uhci_hcd 0000:00:1d.3: UHCI Host Controller [ 0.493200] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 8 [ 0.493227] uhci_hcd 0000:00:1d.3: irq 18, io base 0x0000a040 [ 0.493297] usb usb8: configuration #1 chosen from 1 choice [ 0.493316] hub 8-0:1.0: USB hub found [ 0.493322] hub 8-0:1.0: 2 ports detected [ 0.493402] PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:MOUE] at 0x60,0x64 irq 1,12 [ 0.514079] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.514084] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 0.514176] mice: PS/2 mouse device common for all mice [ 0.515397] rtc_cmos 00:04: RTC can wake from S4 [ 0.515429] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0 [ 0.515452] rtc0: alarms up to one month, 242 bytes nvram, hpet irqs [ 0.515533] device-mapper: uevent: version 1.0.3 [ 0.515620] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com [ 0.515670] device-mapper: multipath: version 1.1.0 loaded [ 0.515672] device-mapper: multipath round-robin: version 1.0.0 loaded [ 0.515758] EISA: Probing bus 0 at eisa.0 [ 0.515766] Cannot allocate resource for EISA slot 2 [ 0.515767] Cannot allocate resource for EISA slot 3 [ 0.515769] Cannot allocate resource for EISA slot 4 [ 0.515770] Cannot allocate resource for EISA slot 5 [ 0.515772] Cannot allocate resource for EISA slot 6 [ 0.515773] Cannot allocate resource for EISA slot 7 [ 0.515775] Cannot allocate resource for EISA slot 8 [ 0.515776] EISA: Detected 0 cards. [ 0.515895] cpuidle: using governor ladder [ 0.515987] cpuidle: using governor menu [ 0.516373] TCP cubic registered [ 0.516494] NET: Registered protocol family 10 [ 0.516885] lo: Disabled Privacy Extensions [ 0.517155] NET: Registered protocol family 17 [ 0.517536] Using IPI No-Shortcut mode [ 0.517592] PM: Resume from disk failed. [ 0.517603] registered taskstats version 1 [ 0.518294] Magic number: 14:433:384 [ 0.518298] usb usb2: hash matches [ 0.518368] rtc_cmos 00:04: setting system clock to 2010-06-15 14:23:07 UTC (1276611787) [ 0.518370] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 0.518372] EDD information not available. [ 0.523697] ACPI: Battery Slot [BAT0] (battery present) [ 0.542156] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input5 [ 0.786817] isapnp: No Plug & Play device found [ 0.786852] Freeing unused kernel memory: 672k freed [ 0.787194] Write protecting the kernel text: 4828k [ 0.787258] Write protecting the kernel read-only data: 1876k [ 0.801854] udev: starting version 151 [ 0.860102] Linux agpgart interface v0.103 [ 0.903440] ahci 0000:00:1f.2: version 3.0 [ 0.903456] ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 0.903493] alloc irq_desc for 31 on node -1 [ 0.903495] alloc kstat_irqs on node -1 [ 0.903505] ahci 0000:00:1f.2: irq 31 for MSI/MSI-X [ 0.903578] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 4 ports 3 Gbps 0x33 impl SATA mode [ 0.903581] ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part ccc ems sxs [ 0.903585] ahci 0000:00:1f.2: setting latency timer to 64 [ 0.908457] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 0.908471] r8169 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 0.908514] r8169 0000:03:00.0: setting latency timer to 64 [ 0.908682] alloc irq_desc for 32 on node -1 [ 0.908684] alloc kstat_irqs on node -1 [ 0.908696] r8169 0000:03:00.0: irq 32 for MSI/MSI-X [ 0.909254] eth0: RTL8168c/8111c at 0xf832c000, 00:1e:68:8b:68:dc, XID 1c2000c0 IRQ 32 [ 0.909579] acpi device:07: registered as cooling_device2 [ 0.909774] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:05/LNXVIDEO:01/input/input6 [ 0.909837] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no) [ 0.919172] ohci1394 0000:06:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.919179] ohci1394 0000:06:00.0: setting latency timer to 64 [ 0.928623] scsi0 : ahci [ 0.928739] scsi1 : ahci [ 0.928785] scsi2 : ahci [ 0.928835] scsi3 : ahci [ 0.928886] scsi4 : ahci [ 0.928936] scsi5 : ahci [ 0.929092] ata1: SATA max UDMA/133 abar m2048@0xdf305000 port 0xdf305100 irq 31 [ 0.929095] ata2: SATA max UDMA/133 abar m2048@0xdf305000 port 0xdf305180 irq 31 [ 0.929096] ata3: DUMMY [ 0.929097] ata4: DUMMY [ 0.929100] ata5: SATA max UDMA/133 abar m2048@0xdf305000 port 0xdf305300 irq 31 [ 0.929102] ata6: SATA max UDMA/133 abar m2048@0xdf305000 port 0xdf305380 irq 31 [ 0.952060] usb 2-4: new high speed USB device using ehci_hcd and address 3 [ 0.977106] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[16] MMIO=[da100000-da1007ff] Max Packet=[2048] IR/IT contexts=[4/4] [ 1.142225] usb 2-4: configuration #1 chosen from 1 choice [ 1.248078] ata6: SATA link down (SStatus 0 SControl 300) [ 1.248106] ata5: SATA link down (SStatus 0 SControl 300) [ 1.368060] usb 2-8: new high speed USB device using ehci_hcd and address 5 [ 1.412049] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1.412066] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1.412639] ata1.00: ATA-8: FUJITSU MHZ2250BH G2, 8909, max UDMA/100 [ 1.412643] ata1.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 1.413366] ata1.00: configured for UDMA/100 [ 1.414233] ata2.00: ATAPI: Optiarc BD ROM BC-5500S, 1.83, max UDMA/100 [ 1.416548] ata2.00: configured for UDMA/100 [ 1.428175] scsi 0:0:0:0: Direct-Access ATA FUJITSU MHZ2250B 8909 PQ: 0 ANSI: 5 [ 1.428328] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 1.428404] sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB) [ 1.428439] sd 0:0:0:0: [sda] Write Protect is off [ 1.428441] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.428460] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.428563] sda: [ 1.433112] scsi 1:0:0:0: CD-ROM Optiarc BD ROM BC-5500S 1.83 PQ: 0 ANSI: 5 [ 1.435790] sr0: scsi3-mmc drive: 16x/16x writer dvd-ram cd/rw xa/form2 cdda tray [ 1.435794] Uniform CD-ROM driver Revision: 3.20 [ 1.435893] sr 1:0:0:0: Attached scsi CD-ROM sr0 [ 1.435946] sr 1:0:0:0: Attached scsi generic sg1 type 5 [ 1.456896] sda1 < sda5 sda6 > sda2 [ 1.489474] sd 0:0:0:0: [sda] Attached SCSI disk [ 1.504466] usb 2-8: configuration #1 chosen from 1 choice [ 1.744050] usb 4-2: new low speed USB device using uhci_hcd and address 2 [ 1.907067] uvesafb: NVIDIA Corporation, G96 Board - 05666490, Chip Rev , OEM: NVIDIA, VBE v3.0 [ 1.922549] usb 4-2: configuration #1 chosen from 1 choice [ 1.943015] usbcore: registered new interface driver hiddev [ 1.957751] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1a.1/usb4/4-2/4-2:1.0/input/input7 [ 1.957881] generic-usb 0003:046D:C51B.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:1a.1-2/input0 [ 1.958818] uvesafb: protected mode interface info at c000:c130 [ 1.958820] uvesafb: pmi: set display start = c00cc193, set palette = c00cc1ee [ 1.958822] uvesafb: pmi: ports = 3b4 3b5 3ba 3c0 3c1 3c4 3c5 3c6 3c7 3c8 3c9 3cc 3ce 3cf 3d0 3d1 3d2 3d3 3d4 3d5 3da [ 1.970717] generic-usb 0003:046D:C51B.0002: hiddev96,hidraw1: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:1a.1-2/input1 [ 1.970737] usbcore: registered new interface driver usbhid [ 1.970808] usbhid: v2.6:USB HID core driver [ 2.026014] uvesafb: VBIOS/hardware doesn't support DDC transfers [ 2.026016] uvesafb: no monitor limits have been set, default refresh rate will be used [ 2.026302] uvesafb: scrolling: ywrap using protected mode interface, yres_virtual=3200 [ 2.028327] uvesafb: framebuffer at 0xd1000000, mapped to 0xf8400000, using 8000k, total 14336k [ 2.028329] fb0: VESA VGA frame buffer device [ 2.228988] usb 6-1: new full speed USB device using uhci_hcd and address 2 [ 2.266076] Console: switching to colour frame buffer device 80x25 [ 2.296696] ieee1394: Host added: ID:BUS[0-00:1023] GUID[00241b00f00d0e01] [ 2.386932] usb 6-1: configuration #1 chosen from 1 choice [ 2.628012] usb 7-2: new full speed USB device using uhci_hcd and address 2 [ 2.747881] xor: automatically using best checksumming function: pIII_sse [ 2.764024] pIII_sse : 9822.000 MB/sec [ 2.764026] xor: using function: pIII_sse (9822.000 MB/sec) [ 2.766030] device-mapper: dm-raid45: initialized v0.2594b [ 2.799141] usb 7-2: configuration #1 chosen from 1 choice [ 2.887882] PM: Marking nosave pages: 0000000000002000 - 0000000000006000 [ 2.887885] PM: Marking nosave pages: 000000000009e000 - 0000000000100000 [ 2.887888] PM: Basic memory bitmaps created [ 2.904052] PM: Basic memory bitmaps freed [ 2.970012] EXT4-fs (sda5): mounted filesystem with ordered data mode [ 18.211960] udev: starting version 151 [ 18.339490] vga16fb: initializing [ 18.339493] vga16fb: mapped to 0xc00a0000 [ 18.339496] vga16fb: not registering due to another framebuffer present [ 18.375681] Adding 9063416k swap on /dev/sda6. Priority:-1 extents:1 across:9063416k [ 18.389011] lp: driver loaded but no devices found [ 18.418908] type=1505 audit(1276604605.397:2): operation="profile_load" pid=647 name="/sbin/dhclient3" [ 18.419445] type=1505 audit(1276604605.397:3): operation="profile_load" pid=647 name="/usr/lib/NetworkManager/nm-dhcp-client.action" [ 18.419736] type=1505 audit(1276604605.397:4): operation="profile_load" pid=647 name="/usr/lib/connman/scripts/dhclient-script" [ 18.497268] nvidia: module license 'NVIDIA' taints kernel. [ 18.497270] Disabling lock debugging due to kernel taint [ 19.136147] cfg80211: Calling CRDA to update world regulatory domain [ 19.192146] sdhci: Secure Digital Host Controller Interface driver [ 19.192148] sdhci: Copyright(c) Pierre Ossman [ 19.193201] sdhci-pci 0000:06:00.1: SDHCI controller found [197b:2382] (rev 0) [ 19.193222] sdhci-pci 0000:06:00.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 19.193257] sdhci-pci 0000:06:00.1: setting latency timer to 64 [ 19.193284] Registered led device: mmc0:: [ 19.193311] mmc0: SDHCI controller on PCI [0000:06:00.1] using DMA [ 19.193321] sdhci-pci 0000:06:00.2: SDHCI controller found [197b:2381] (rev 0) [ 19.193336] sdhci-pci 0000:06:00.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 19.193342] sdhci-pci 0000:06:00.2: Refusing to bind to secondary interface. [ 19.193348] sdhci-pci 0000:06:00.2: PCI INT A disabled [ 19.201235] Bluetooth: Core ver 2.15 [ 19.201307] iwlagn: Intel(R) Wireless WiFi Link AGN driver for Linux, 1.3.27k [ 19.201309] iwlagn: Copyright(c) 2003-2009 Intel Corporation [ 19.201344] iwlagn 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 19.201352] iwlagn 0000:02:00.0: setting latency timer to 64 [ 19.201370] iwlagn 0000:02:00.0: Detected Intel Wireless WiFi Link 5100AGN REV=0x54 [ 19.274256] iwlagn 0000:02:00.0: Tunable channels: 13 802.11bg, 24 802.11a channels [ 19.274313] alloc irq_desc for 33 on node -1 [ 19.274315] alloc kstat_irqs on node -1 [ 19.274332] iwlagn 0000:02:00.0: irq 33 for MSI/MSI-X [ 19.282143] NET: Registered protocol family 31 [ 19.282145] Bluetooth: HCI device and connection manager initialized [ 19.282148] Bluetooth: HCI socket layer initialized [ 19.283447] Bluetooth: Generic Bluetooth USB driver ver 0.6 [ 19.283534] usbcore: registered new interface driver btusb [ 19.287607] Linux video capture interface: v2.00 [ 19.301567] lis3lv02d: hardware type HPDV5_I found. [ 19.306408] uvcvideo: Found UVC 1.00 device HP Webcam (5986:0137) [ 19.308651] lirc_dev: IR Remote Control driver registered, major 61 [ 19.309158] lirc_dev: lirc_register_driver: sample_rate: 0 [ 19.309241] enecir: KB3926C detected, driver support is not complete! [ 19.309244] enecir: chip is 0x3926 - 0x00, 0xc0 [ 19.309250] enecir: hardware features: [ 19.309251] enecir: learning and tx off, gpio40_learn off, fan_in off [ 19.309253] enecir: driver has been succesfully loaded [ 19.317519] lis3lv02d: 1-byte sensor found [ 19.318471] input: HP Webcam as /devices/pci0000:00/0000:00:1d.7/usb2/2-4/2-4:1.0/input/input8 [ 19.318581] usbcore: registered new interface driver uvcvideo [ 19.318707] USB Video Class driver (v0.1.0) [ 19.320396] jmb38x_ms 0000:06:00.3: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 19.320403] jmb38x_ms 0000:06:00.3: setting latency timer to 64 [ 19.340375] dvb-usb: found a 'AVerMedia A309' in cold state, will try to load a firmware [ 19.340379] usb 2-8: firmware: requesting dvb-usb-af9015.fw [ 19.377523] phy0: Selected rate control algorithm 'iwl-agn-rs' [ 19.378372] nvidia 0000:01:00.0: power state changed by ACPI to D0 [ 19.378393] nvidia 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 19.378413] nvidia 0000:01:00.0: setting latency timer to 64 [ 19.378424] vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem [ 19.380430] NVRM: loading NVIDIA UNIX x86 Kernel Module 195.36.15 Thu Mar 11 21:41:46 PST 2010 [ 19.405065] cfg80211: World regulatory domain updated: [ 19.405068] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 19.405071] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 19.405073] (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 19.405075] (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 19.405076] (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 19.405078] (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 19.432660] alloc irq_desc for 22 on node -1 [ 19.432662] alloc kstat_irqs on node -1 [ 19.432668] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 [ 19.432700] HDA Intel 0000:00:1b.0: setting latency timer to 64 [ 19.492321] dvb-usb: did not find the firmware file. (dvb-usb-af9015.fw) Please see linux/Documentation/dvb/ for more details on firmware-problems. (-2) [ 19.492331] dvb_usb_af9015: probe of 2-8:1.0 failed with error -2 [ 19.492355] usbcore: registered new interface driver dvb_usb_af9015 [ 19.500229] input: ST LIS3LV02DL Accelerometer as /devices/platform/lis3lv02d/input/input9 [ 19.500306] Registered led device: hp::hddprotect [ 19.500319] lis3lv02d driver loaded. [ 19.572565] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input10 [ 19.593687] input: HDA Intel Mic at Ext Front Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11 [ 19.593817] input: HDA Intel Mic at Sep UNKNOWN Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12 [ 19.593915] input: HDA Intel HP Out at Ext Front Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13 [ 19.652442] iwlagn 0000:02:00.0: firmware: requesting iwlwifi-5000-2.ucode [ 19.656607] iwlagn 0000:02:00.0: loaded firmware version 8.24.2.12 [ 19.800038] Registered led device: iwl-phy0::radio [ 19.800053] Registered led device: iwl-phy0::assoc [ 19.800065] Registered led device: iwl-phy0::RX [ 19.800078] Registered led device: iwl-phy0::TX [ 19.812532] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 19.814026] r8169: eth0: link down [ 19.814171] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 19.832820] type=1505 audit(1276604606.814:5): operation="profile_load" pid=1021 name="/usr/share/gdm/guest-session/Xsession" [ 19.834126] type=1505 audit(1276604606.814:6): operation="profile_replace" pid=1022 name="/sbin/dhclient3" [ 19.834669] type=1505 audit(1276604606.814:7): operation="profile_replace" pid=1022 name="/usr/lib/NetworkManager/nm-dhcp-client.action" [ 19.834961] type=1505 audit(1276604606.814:8): operation="profile_replace" pid=1022 name="/usr/lib/connman/scripts/dhclient-script" [ 19.838939] type=1505 audit(1276604606.818:9): operation="profile_load" pid=1023 name="/usr/bin/evince" [ 19.847823] type=1505 audit(1276604606.826:10): operation="profile_load" pid=1023 name="/usr/bin/evince-previewer" [ 19.852478] type=1505 audit(1276604606.830:11): operation="profile_load" pid=1023 name="/usr/bin/evince-thumbnailer" [ 20.006416] apm: BIOS not found. [ 20.295893] Synaptics Touchpad, model: 1, fw: 6.5, id: 0x1c0b1, caps: 0xa04751/0xa00000 [ 20.373186] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input14 [ 23.646246] vboxdrv: Trying to deactivate the NMI watchdog permanently... [ 23.646248] vboxdrv: Warning: 2.6.31+ kernel detected. Most likely the hardware performance [ 23.646249] vboxdrv: counter framework which can generate NMIs is active. You have to prevent [ 23.646250] vboxdrv: the usage of hardware performance counters by [ 23.646251] vboxdrv: echo 2 > /proc/sys/kernel/perf_counter_paranoid [ 23.646254] vboxdrv: Found 2 processor cores. [ 23.646514] vboxdrv: fAsync=0 offMin=0x1c8 offMax=0x9f2 [ 23.646817] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'. [ 23.646820] vboxdrv: Successfully loaded version 3.2.4 (interface 0x00140001). [ 23.995639] CPU0 attaching NULL sched-domain. [ 23.995644] CPU1 attaching NULL sched-domain. [ 24.019777] Bluetooth: L2CAP ver 2.14 [ 24.019779] Bluetooth: L2CAP socket layer initialized [ 24.024281] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 24.024283] Bluetooth: BNEP filters: protocol multicast [ 24.032079] Bridge firewalling registered [ 24.037802] Bluetooth: SCO (Voice Link) ver 0.6 [ 24.037804] Bluetooth: SCO socket layer initialized [ 24.058904] ppdev: user-space parallel port driver [ 24.144573] Bluetooth: RFCOMM TTY layer initialized [ 24.144576] Bluetooth: RFCOMM socket layer initialized [ 24.144577] Bluetooth: RFCOMM ver 1.11 [ 24.976695] CPU0 attaching sched-domain: [ 24.976699] domain 0: span 0-1 level MC [ 24.976708] groups: 0 1 [ 24.976712] CPU1 attaching sched-domain: [ 24.976714] domain 0: span 0-1 level MC [ 24.976716] groups: 1 0 [ 25.210337] CPU0 attaching NULL sched-domain. [ 25.210342] CPU1 attaching NULL sched-domain. [ 25.265021] CPU0 attaching sched-domain: [ 25.265024] domain 0: span 0-1 level MC [ 25.265026] groups: 0 1 [ 25.265030] CPU1 attaching sched-domain: [ 25.265032] domain 0: span 0-1 level MC [ 25.265034] groups: 1 0 [ 25.318796] CPU0 attaching NULL sched-domain. [ 25.318801] CPU1 attaching NULL sched-domain. [ 25.364070] CPU0 attaching sched-domain: [ 25.364072] domain 0: span 0-1 level MC [ 25.364075] groups: 0 1 [ 25.364078] CPU1 attaching sched-domain: [ 25.364080] domain 0: span 0-1 level MC [ 25.364082] groups: 1 0 [ 27.840621] CPU0 attaching NULL sched-domain. [ 27.840626] CPU1 attaching NULL sched-domain. [ 27.859614] CPU0 attaching sched-domain: [ 27.859617] domain 0: span 0-1 level MC [ 27.859619] groups: 0 1 [ 27.859624] CPU1 attaching sched-domain: [ 27.859626] domain 0: span 0-1 level MC [ 27.859628] groups: 1 0 [ 31.244430] wlan0: deauthenticating from 00:19:5b:1d:32:d0 by local choice (reason=3) [ 31.244502] wlan0: direct probe to AP 00:19:5b:1d:32:d0 (try 1) [ 31.248692] wlan0: direct probe responded [ 31.248701] wlan0: authenticate with AP 00:19:5b:1d:32:d0 (try 1) [ 31.250257] wlan0: authenticated [ 31.250294] wlan0: associate with AP 00:19:5b:1d:32:d0 (try 1) [ 31.255072] wlan0: RX AssocResp from 00:19:5b:1d:32:d0 (capab=0x471 status=0 aid=1) [ 31.255080] wlan0: associated [ 31.257690] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 41.948014] wlan0: no IPv6 routers present [ 782.248200] CE: hpet increasing min_delta_ns to 15000 nsec [ 782.248304] CE: hpet increasing min_delta_ns to 22500 nsec [ 815.744079] CE: hpet increasing min_delta_ns to 33750 nsec [ 1493.400613] CE: hpet increasing min_delta_ns to 50624 nsec [ 2976.600317] CPU0 attaching NULL sched-domain. [ 2976.600328] CPU1 attaching NULL sched-domain. [ 2976.620321] CPU0 attaching sched-domain: [ 2976.620329] domain 0: span 0-1 level MC [ 2976.620336] groups: 0 1 [ 2976.620348] CPU1 attaching sched-domain: [ 2976.620353] domain 0: span 0-1 level MC [ 2976.620360] groups: 1 0 [ 2977.688711] wlan0: deauthenticating from 00:19:5b:1d:32:d0 by local choice (reason=3) [ 2981.192399] PM: Marking nosave pages: 0000000000002000 - 0000000000006000 [ 2981.192402] PM: Marking nosave pages: 000000000009e000 - 0000000000100000 [ 2981.192406] PM: Basic memory bitmaps created [ 2981.192407] PM: Syncing filesystems ... done. [ 2981.340117] Freezing user space processes ... (elapsed 0.00 seconds) done. [ 2981.340969] Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done. [ 2981.341031] PM: Preallocating image memory... done (allocated 887216 pages) [ 2987.143757] PM: Allocated 3548864 kbytes in 5.80 seconds (611.87 MB/s) [ 2987.143759] Suspending console(s) (use no_console_suspend to debug) [ 2987.189471] btusb_intr_complete: hci0 urb f37c0d00 failed to resubmit (1) [ 2987.190468] btusb_bulk_complete: hci0 urb f37c0d80 failed to resubmit (1) [ 2987.191469] btusb_bulk_complete: hci0 urb f37c0e00 failed to resubmit (1) [ 2987.600096] sd 0:0:0:0: [sda] Synchronizing SCSI cache [ 2987.600287] PM: freeze of drv:sd dev:0:0:0:0 complete after 407.303 msecs [ 2987.601085] jmb38x_ms 0000:06:00.3: PCI INT A disabled [ 2987.616242] sdhci-pci 0000:06:00.1: PCI INT A disabled [ 2988.112166] HDA Intel 0000:00:1b.0: PCI INT A disabled [ 2988.112218] ACPI handle has no context! [ 2988.128096] PM: freeze of drv:HDA Intel dev:0000:00:1b.0 complete after 327.820 msecs [ 2988.140439] PM: freeze of devices complete after 996.305 msecs [ 2988.141464] PM: late freeze of devices complete after 1.022 msecs [ 2988.142104] ACPI: Preparing to enter system sleep state S4 [ 2988.229095] PM: Saving platform NVS memory [ 2988.248011] Disabling non-boot CPUs ... [ 2988.248027] CPU0 attaching NULL sched-domain. [ 2988.248029] CPU1 attaching NULL sched-domain. [ 2988.312012] CPU0 attaching NULL sched-domain. [ 2988.313092] Breaking affinity for irq 1 [ 2988.313123] Breaking affinity for irq 16 [ 2988.313135] Breaking affinity for irq 21 [ 2988.313139] Breaking affinity for irq 22 [ 2988.416013] CPU 1 is now offline [ 2988.416015] SMP alternatives: switching to UP code [ 2988.422765] PM: Creating hibernation image: [ 2988.424006] PM: Need to copy 116521 pages [ 2988.424006] PM: Normal pages needed: 43981 + 1024, available pages: 183672 [ 2988.424006] PM: Restoring platform NVS memory [ 2988.424006] CPU0: Thermal monitoring enabled (TM1) [ 2988.424006] Enabling non-boot CPUs ... [ 2988.424006] SMP alternatives: switching to SMP code [ 2988.429117] Booting processor 1 APIC 0x1 ip 0x6000 [ 2988.422439] Initializing CPU#1 [ 2988.422439] CPU: L1 I cache: 32K, L1 D cache: 32K [ 2988.422439] CPU: L2 cache: 6144K [ 2988.422439] CPU: Physical Processor ID: 0 [ 2988.422439] CPU: Processor Core ID: 1 [ 2988.422439] CPU1: Thermal monitoring enabled (TM1) [ 2988.520045] CPU1: Intel(R) Core(TM)2 Duo CPU T9400 @ 2.53GHz stepping 06 [ 2988.520107] CPU0 attaching NULL sched-domain. [ 2988.548014] CPU0 attaching sched-domain: [ 2988.548016] domain 0: span 0-1 level MC [ 2988.548018] groups: 0 1 [ 2988.548021] CPU1 attaching sched-domain: [ 2988.548023] domain 0: span 0-1 level MC [ 2988.548024] groups: 1 0 [ 2988.548404] CPU1 is up [ 2988.549306] ACPI: Waking up from system sleep state S4 [ 2988.702470] HDA Intel 0000:00:1b.0: restoring config space at offset 0x1 (was 0x100006, writing 0x100002) [ 2988.702506] pcieport 0000:00:1c.0: restoring config space at offset 0x7 (was 0x20008080, writing 0x8080) [ 2988.702561] pcieport 0000:00:1c.1: restoring config space at offset 0x7 (was 0x20007060, writing 0x7060) [ 2988.703070] ahci 0000:00:1f.2: restoring config space at offset 0x1 (was 0x2b00403, writing 0x2b00407) [ 2988.703202] nvidia 0000:01:00.0: restoring config space at offset 0xc (was 0xfff80000, writing 0x0) [ 2988.703220] nvidia 0000:01:00.0: restoring config space at offset 0x3 (was 0x10, writing 0x0) [ 2988.703654] pci 0000:06:00.2: restoring config space at offset 0x1 (was 0x100007, writing 0x100003) [ 2988.704072] PM: early restore of devices complete after 1.864 msecs [ 2988.948210] PM: restore of drv:battery dev:PNP0C0A:00 complete after 195.844 msecs [ 2989.104251] PM: restore of drv:lis3lv02d dev:HPQ0004:00 complete after 143.910 msecs [ 2989.104294] uhci_hcd 0000:00:1a.0: setting latency timer to 64 [ 2989.104328] usb usb3: root hub lost power or was reset [ 2989.104346] uhci_hcd 0000:00:1a.1: setting latency timer to 64 [ 2989.104378] usb usb4: root hub lost power or was reset [ 2989.104403] ehci_hcd 0000:00:1a.7: setting latency timer to 64 [ 2989.104407] usb usb1: root hub lost power or was reset [ 2989.108295] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported [ 2989.108310] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 [ 2989.108315] HDA Intel 0000:00:1b.0: setting latency timer to 64 [ 2989.108354] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [ 2989.108386] usb usb5: root hub lost power or was reset [ 2989.108403] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [ 2989.108435] usb usb6: root hub lost power or was reset [ 2989.108468] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [ 2989.108499] usb usb7: root hub lost power or was reset [ 2989.108538] uhci_hcd 0000:00:1d.3: setting latency timer to 64 [ 2989.108575] usb usb8: root hub lost power or was reset [ 2989.108592] ehci_hcd 0000:00:1d.7: setting latency timer to 64 [ 2989.108596] usb usb2: root hub lost power or was reset [ 2989.112476] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported [ 2989.112489] pci 0000:00:1e.0: setting latency timer to 64 [ 2989.112503] ahci 0000:00:1f.2: setting latency timer to 64 [ 2989.555253] PM: restore of drv:nvidia dev:0000:01:00.0 complete after 442.672 msecs [ 2989.555294] iwlagn 0000:02:00.0: RF_KILL bit toggled to enable radio. [ 2989.613131] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[16] MMIO=[da100000-da1007ff] Max Packet=[2048] IR/IT contexts=[4/4] [ 2989.621239] sdhci-pci 0000:06:00.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 2989.621254] sdhci-pci 0000:06:00.1: setting latency timer to 64 [ 2989.621274] jmb38x_ms 0000:06:00.3: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 2989.621279] jmb38x_ms 0000:06:00.3: setting latency timer to 64 [ 2989.628636] ata5: SATA link down (SStatus 0 SControl 300) [ 2989.628639] ata6: SATA link down (SStatus 0 SControl 300) [ 2989.792111] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 2989.792566] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2989.793498] ata1.00: configured for UDMA/100 [ 2989.797244] ata2.00: configured for UDMA/100 [ 2989.872107] PM: restore of drv:usb dev:usb1 complete after 250.422 msecs [ 2990.228097] PM: restore of drv:usb dev:usb2 complete after 355.975 msecs [ 2990.476094] PM: restore of drv:usb dev:usb4 complete after 247.971 msecs [ 2990.724093] PM: restore of drv:usb dev:usb6 complete after 247.974 msecs [ 2990.972094] PM: restore of drv:usb dev:usb7 complete after 247.987 msecs [ 2991.088097] usb 2-4: reset high speed USB device using ehci_hcd and address 3 [ 2991.269544] PM: restore of drv:usb dev:2-4 complete after 289.907 msecs [ 2991.269560] sd 0:0:0:0: [sda] Starting disk [ 2991.420045] usb 2-8: reset high speed USB device using ehci_hcd and address 5 [ 2991.555167] PM: restore of drv:usb dev:2-8 complete after 245.157 msecs [ 2991.812043] usb 4-2: reset low speed USB device using uhci_hcd and address 2 [ 2992.126138] PM: restore of drv:usb dev:4-2 complete after 570.951 msecs [ 2992.236044] usb 6-1: reset full speed USB device using uhci_hcd and address 2 [ 2992.393153] PM: restore of drv:usb dev:6-1 complete after 266.957 msecs [ 2992.504043] usb 7-2: reset full speed USB device using uhci_hcd and address 2 [ 2992.653178] btusb 7-2:1.0: no reset_resume for driver btusb? [ 2992.653181] btusb 7-2:1.1: no reset_resume for driver btusb? [ 2992.904172] PM: restore of drv:usb dev:7-2 complete after 510.993 msecs [ 2992.904439] PM: restore of devices complete after 4165.714 msecs [ 2992.904809] PM: Image restored successfully. [ 2992.904811] Restarting tasks ... done. [ 2992.908115] PM: Basic memory bitmaps freed [ 3021.010501] Registered led device: iwl-phy0::radio [ 3021.010527] Registered led device: iwl-phy0::assoc [ 3021.010542] Registered led device: iwl-phy0::RX [ 3021.010557] Registered led device: iwl-phy0::TX [ 3021.032705] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 3021.034042] r8169: eth0: link down [ 3021.034198] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 3026.292693] wlan0: deauthenticating from 00:19:5b:1d:32:d0 by local choice (reason=3) [ 3026.331422] wlan0: direct probe to AP 00:19:5b:1d:32:d0 (try 1) [ 3026.333505] wlan0: direct probe responded [ 3026.333512] wlan0: authenticate with AP 00:19:5b:1d:32:d0 (try 1) [ 3026.335944] wlan0: authenticated [ 3026.335976] wlan0: associate with AP 00:19:5b:1d:32:d0 (try 1) [ 3026.340806] wlan0: RX AssocResp from 00:19:5b:1d:32:d0 (capab=0x471 status=0 aid=2) [ 3026.340812] wlan0: associated [ 3026.342315] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 3026.743991] CPU0 attaching NULL sched-domain. [ 3026.744034] CPU1 attaching NULL sched-domain. [ 3026.772555] CPU0 attaching sched-domain: [ 3026.772563] domain 0: span 0-1 level MC [ 3026.772570] groups: 0 1 [ 3026.772585] CPU1 attaching sched-domain: [ 3026.772591] domain 0: span 0-1 level MC [ 3026.772597] groups: 1 0 [ 3037.300107] wlan0: no IPv6 routers present