Here are the results of the uname -a, cat /proc/version_signature, dmesg and sudo lspci -vnvn commands: Linux andre-laptop 2.6.31-14-generic #48-Ubuntu SMP Fri Oct 16 14:04:26 UTC 2009 i686 GNU/Linux Ubuntu 2.6.31-14.48-generic [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.31-14-generic (buildd@rothera) (gcc version 4.4.1 (Ubuntu 4.4.1-4ubuntu8) ) #48-Ubuntu SMP Fri Oct 16 14:04:26 UTC 2009 (Ubuntu 2.6.31-14.48-generic) [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] NSC Geode by NSC [ 0.000000] Cyrix CyrixInstead [ 0.000000] Centaur CentaurHauls [ 0.000000] Transmeta GenuineTMx86 [ 0.000000] Transmeta TransmetaCPU [ 0.000000] UMC UMC UMC UMC [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f000 (usable) [ 0.000000] BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 00000000bf66d800 (usable) [ 0.000000] BIOS-e820: 00000000bf66d800 - 00000000c0000000 (reserved) [ 0.000000] BIOS-e820: 00000000f8000000 - 00000000fc000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) [ 0.000000] BIOS-e820: 00000000fed18000 - 00000000fed1c000 (reserved) [ 0.000000] BIOS-e820: 00000000fed20000 - 00000000fed90000 (reserved) [ 0.000000] BIOS-e820: 00000000feda0000 - 00000000feda6000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee10000 (reserved) [ 0.000000] BIOS-e820: 00000000ffe00000 - 0000000100000000 (reserved) [ 0.000000] DMI 2.4 present. [ 0.000000] last_pfn = 0xbf66d max_arch_pfn = 0x100000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-CFFFF write-protect [ 0.000000] D0000-EFFFF uncachable [ 0.000000] F0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000 mask F80000000 write-back [ 0.000000] 1 base 080000000 mask FC0000000 write-back [ 0.000000] 2 base 0BF800000 mask FFF800000 uncachable [ 0.000000] 3 base 0BF700000 mask FFFF00000 uncachable [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] e820 update range: 0000000000002000 - 0000000000006000 (usable) ==> (reserved) [ 0.000000] Scanning 1 areas for low memory corruption [ 0.000000] modified physical RAM map: [ 0.000000] modified: 0000000000000000 - 0000000000002000 (usable) [ 0.000000] modified: 0000000000002000 - 0000000000006000 (reserved) [ 0.000000] modified: 0000000000006000 - 000000000009f000 (usable) [ 0.000000] modified: 000000000009f000 - 00000000000a0000 (reserved) [ 0.000000] modified: 0000000000100000 - 00000000bf66d800 (usable) [ 0.000000] modified: 00000000bf66d800 - 00000000c0000000 (reserved) [ 0.000000] modified: 00000000f8000000 - 00000000fc000000 (reserved) [ 0.000000] modified: 00000000fec00000 - 00000000fec10000 (reserved) [ 0.000000] modified: 00000000fed18000 - 00000000fed1c000 (reserved) [ 0.000000] modified: 00000000fed20000 - 00000000fed90000 (reserved) [ 0.000000] modified: 00000000feda0000 - 00000000feda6000 (reserved) [ 0.000000] modified: 00000000fee00000 - 00000000fee10000 (reserved) [ 0.000000] modified: 00000000ffe00000 - 0000000100000000 (reserved) [ 0.000000] initial memory mapped : 0 - 00c00000 [ 0.000000] init_memory_mapping: 0000000000000000-00000000377fe000 [ 0.000000] Using x86 segment limits to approximate NX protection [ 0.000000] 0000000000 - 0000400000 page 4k [ 0.000000] 0000400000 - 0037400000 page 2M [ 0.000000] 0037400000 - 00377fe000 page 4k [ 0.000000] kernel direct mapping tables up to 377fe000 @ 7000-c000 [ 0.000000] RAMDISK: 37867000 - 37fefee3 [ 0.000000] Allocated new RAMDISK: 008ad000 - 01035ee3 [ 0.000000] Move RAMDISK from 0000000037867000 - 0000000037fefee2 to 008ad000 - 01035ee2 [ 0.000000] ACPI: RSDP 000fbc60 00024 (v02 DELL ) [ 0.000000] ACPI: XSDT bf66f200 00064 (v01 DELL M08 27D80A10 ASL 00000061) [ 0.000000] ACPI: FACP bf66f09c 000F4 (v04 DELL M08 27D80A10 ASL 00000061) [ 0.000000] ACPI: DSDT bf66f800 05477 (v02 INT430 SYSFexxx 00001001 INTL 20050624) [ 0.000000] ACPI: FACS bf67e000 00040 [ 0.000000] ACPI: HPET bf66f300 00038 (v01 DELL M08 00000001 ASL 00000061) [ 0.000000] ACPI: APIC bf66f400 00068 (v01 DELL M08 27D80A10 ASL 00000047) [ 0.000000] ACPI: MCFG bf66f3c0 0003E (v16 DELL M08 27D80A10 ASL 00000061) [ 0.000000] ACPI: SLIC bf66f49c 00176 (v01 DELL M08 27D80A10 ASL 00000061) [ 0.000000] ACPI: OSFR bf66ea00 0002C (v01 DELL M08 27D80A10 ASL 00000061) [ 0.000000] ACPI: BOOT bf66efc0 00028 (v01 DELL M08 27D80A10 ASL 00000061) [ 0.000000] ACPI: SSDT bf66da44 004CC (v01 PmRef CpuPm 00003000 INTL 20050624) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] 2174MB HIGHMEM available. [ 0.000000] 887MB LOWMEM available. [ 0.000000] mapped low ram: 0 - 377fe000 [ 0.000000] low ram: 0 - 377fe000 [ 0.000000] node 0 low ram: 00000000 - 377fe000 [ 0.000000] node 0 bootmap 00008000 - 0000ef00 [ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 00377fe000] [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] [ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000] [ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000] [ 0.000000] #3 [0000100000 - 00008a80a0] TEXT DATA BSS ==> [0000100000 - 00008a80a0] [ 0.000000] #4 [000009f000 - 0000100000] BIOS reserved ==> [000009f000 - 0000100000] [ 0.000000] #5 [00008a9000 - 00008ac184] BRK ==> [00008a9000 - 00008ac184] [ 0.000000] #6 [0000007000 - 0000008000] PGTABLE ==> [0000007000 - 0000008000] [ 0.000000] #7 [00008ad000 - 0001035ee3] NEW RAMDISK ==> [00008ad000 - 0001035ee3] [ 0.000000] #8 [0000008000 - 000000f000] BOOTMAP ==> [0000008000 - 000000f000] [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000000 -> 0x00001000 [ 0.000000] Normal 0x00001000 -> 0x000377fe [ 0.000000] HighMem 0x000377fe -> 0x000bf66d [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[3] active PFN ranges [ 0.000000] 0: 0x00000000 -> 0x00000002 [ 0.000000] 0: 0x00000006 -> 0x0000009f [ 0.000000] 0: 0x00000100 -> 0x000bf66d [ 0.000000] On node 0 totalpages: 783880 [ 0.000000] free_area_init_node: node 0, pgdat c0784900, node_mem_map c1036000 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 3963 pages, LIFO batch:0 [ 0.000000] Normal zone: 1744 pages used for memmap [ 0.000000] Normal zone: 221486 pages, LIFO batch:31 [ 0.000000] HighMem zone: 4349 pages used for memmap [ 0.000000] HighMem zone: 552306 pages, LIFO batch:31 [ 0.000000] Using APIC driver default [ 0.000000] ACPI: PM-Timer IO Port: 0x1008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs [ 0.000000] nr_irqs_gsi: 24 [ 0.000000] PM: Registered nosave memory: 0000000000002000 - 0000000000006000 [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 0000000000100000 [ 0.000000] Allocating PCI resources starting at c0000000 (gap: c0000000:38000000) [ 0.000000] NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 14 pages at c2836000, static data 35612 bytes [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 777755 [ 0.000000] Kernel command line: root=UUID=0c1b8172-52a0-4bc5-91f4-98e6569c6ed3 ro splash [ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Enabling fast FPU save and restore... done. [ 0.000000] Enabling unmasked SIMD FPU exception support... done. [ 0.000000] Initializing CPU#0 [ 0.000000] xsave/xrstor: enabled xstate_bv 0x3, cntxt size 0x240 [ 0.000000] allocated 15679620 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] Initializing HighMem for node 0 (000377fe:000bf66d) [ 0.000000] Memory: 3078220k/3135924k available (4565k kernel code, 56404k reserved, 2143k data, 540k init, 2226620k highmem) [ 0.000000] virtual kernel memory layout: [ 0.000000] fixmap : 0xfff1d000 - 0xfffff000 ( 904 kB) [ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB) [ 0.000000] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB) [ 0.000000] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB) [ 0.000000] .init : 0xc078e000 - 0xc0815000 ( 540 kB) [ 0.000000] .data : 0xc0575554 - 0xc078d308 (2143 kB) [ 0.000000] .text : 0xc0100000 - 0xc0575554 (4565 kB) [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.000000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 [ 0.000000] NR_IRQS:2304 nr_irqs:424 [ 0.000000] Extended CMOS year: 2000 [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 1995.181 MHz processor. [ 0.001269] Console: colour VGA+ 80x25 [ 0.001272] console [tty0] enabled [ 0.004000] hpet clockevent registered [ 0.004000] HPET: 3 timers in total, 0 timers will be used for per-cpu timer [ 0.004000] Calibrating delay loop (skipped), value calculated using timer frequency.. 3990.36 BogoMIPS (lpj=7980724) [ 0.004000] Security Framework initialized [ 0.004000] AppArmor: AppArmor initialized [ 0.004000] Mount-cache hash table entries: 512 [ 0.004000] Initializing cgroup subsys ns [ 0.004000] Initializing cgroup subsys cpuacct [ 0.004000] Initializing cgroup subsys memory [ 0.004000] Initializing cgroup subsys freezer [ 0.004000] Initializing cgroup subsys net_cls [ 0.004000] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.004000] CPU: L2 cache: 2048K [ 0.004000] CPU: Physical Processor ID: 0 [ 0.004000] CPU: Processor Core ID: 0 [ 0.004000] mce: CPU supports 6 MCE banks [ 0.004000] CPU0: Thermal monitoring enabled (TM2) [ 0.004000] using mwait in idle threads. [ 0.004000] Performance Counters: Core2 events, Intel PMU driver. [ 0.004000] ... version: 2 [ 0.004000] ... bit width: 40 [ 0.004000] ... generic counters: 2 [ 0.004000] ... value mask: 000000ffffffffff [ 0.004000] ... max period: 000000007fffffff [ 0.004000] ... fixed-purpose counters: 3 [ 0.004000] ... counter mask: 0000000700000003 [ 0.004000] Checking 'hlt' instruction... OK. [ 0.018765] ACPI: Core revision 20090521 [ 0.028428] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.069555] CPU0: Intel(R) Core(TM)2 Duo CPU T6400 @ 2.00GHz stepping 0a [ 0.072001] Booting processor 1 APIC 0x1 ip 0x6000 [ 0.004000] Initializing CPU#1 [ 0.004000] Calibrating delay using timer specific routine.. 3989.96 BogoMIPS (lpj=7979923) [ 0.004000] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.004000] CPU: L2 cache: 2048K [ 0.004000] CPU: Physical Processor ID: 0 [ 0.004000] CPU: Processor Core ID: 1 [ 0.004000] mce: CPU supports 6 MCE banks [ 0.004000] CPU1: Thermal monitoring enabled (TM2) [ 0.004000] x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106 [ 0.157541] CPU1: Intel(R) Core(TM)2 Duo CPU T6400 @ 2.00GHz stepping 0a [ 0.158747] checking TSC synchronization [CPU#0 -> CPU#1]: passed. [ 0.160020] Brought up 2 CPUs [ 0.160066] Total of 2 processors activated (7980.32 BogoMIPS). [ 0.160165] CPU0 attaching sched-domain: [ 0.160168] domain 0: span 0-1 level MC [ 0.160170] groups: 0 1 [ 0.160175] CPU1 attaching sched-domain: [ 0.160177] domain 0: span 0-1 level MC [ 0.160179] groups: 1 0 [ 0.160252] Booting paravirtualized kernel on bare hardware [ 0.160256] regulator: core version 0.5 [ 0.160256] Time: 23:04:03 Date: 10/26/09 [ 0.160256] NET: Registered protocol family 16 [ 0.160340] EISA bus registered [ 0.160392] ACPI: bus type pci registered [ 0.164005] PCI: MCFG configuration 0: base f8000000 segment 0 buses 0 - 63 [ 0.164056] PCI: MCFG area at f8000000 reserved in E820 [ 0.164103] PCI: Using MMCONFIG for extended config space [ 0.164151] PCI: Using configuration type 1 for base access [ 0.165175] bio: create slab at 0 [ 0.165175] ACPI: EC: Look up EC in DSDT [ 0.188743] ACPI: Interpreter enabled [ 0.188794] ACPI: (supports S0 S3 S4 S5) [ 0.188977] ACPI: Using IOAPIC for interrupt routing [ 0.228700] ACPI: No dock devices found. [ 0.245682] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 0.245823] pci 0000:00:02.0: reg 10 64bit mmio: [0xfea00000-0xfeafffff] [ 0.245831] pci 0000:00:02.0: reg 18 64bit mmio: [0xe0000000-0xefffffff] [ 0.245836] pci 0000:00:02.0: reg 20 io port: [0xeff8-0xefff] [ 0.245878] pci 0000:00:02.1: reg 10 64bit mmio: [0xfeb00000-0xfebfffff] [ 0.245996] pci 0000:00:1a.0: reg 20 io port: [0x6f20-0x6f3f] [ 0.246064] pci 0000:00:1a.1: reg 20 io port: [0x6f00-0x6f1f] [ 0.246140] pci 0000:00:1a.7: reg 10 32bit mmio: [0xfed1c400-0xfed1c7ff] [ 0.246208] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold [ 0.246260] pci 0000:00:1a.7: PME# disabled [ 0.246361] pci 0000:00:1b.0: reg 10 64bit mmio: [0xfe9fc000-0xfe9fffff] [ 0.246427] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.246479] pci 0000:00:1b.0: PME# disabled [ 0.246616] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.246668] pci 0000:00:1c.0: PME# disabled [ 0.246809] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold [ 0.246861] pci 0000:00:1c.1: PME# disabled [ 0.247004] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold [ 0.247056] pci 0000:00:1c.4: PME# disabled [ 0.247170] pci 0000:00:1d.0: reg 20 io port: [0x6f80-0x6f9f] [ 0.247238] pci 0000:00:1d.1: reg 20 io port: [0x6f60-0x6f7f] [ 0.247310] pci 0000:00:1d.2: reg 20 io port: [0x6f40-0x6f5f] [ 0.247384] pci 0000:00:1d.7: reg 10 32bit mmio: [0xfed1c000-0xfed1c3ff] [ 0.247452] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold [ 0.247504] pci 0000:00:1d.7: PME# disabled [ 0.247727] pci 0000:00:1f.0: quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO [ 0.247790] pci 0000:00:1f.0: quirk: region 1080-10bf claimed by ICH6 GPIO [ 0.247842] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0900 (mask 007f) [ 0.247905] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 006c (mask 0007) [ 0.247967] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 0c80 (mask 003f) [ 0.248057] pci 0000:00:1f.1: reg 10 io port: [0x1f0-0x1f7] [ 0.248066] pci 0000:00:1f.1: reg 14 io port: [0x3f4-0x3f7] [ 0.248074] pci 0000:00:1f.1: reg 18 io port: [0x170-0x177] [ 0.248083] pci 0000:00:1f.1: reg 1c io port: [0x374-0x377] [ 0.248091] pci 0000:00:1f.1: reg 20 io port: [0x6fa0-0x6faf] [ 0.248169] pci 0000:00:1f.2: reg 10 io port: [0x6eb0-0x6eb7] [ 0.248177] pci 0000:00:1f.2: reg 14 io port: [0x6eb8-0x6ebb] [ 0.248185] pci 0000:00:1f.2: reg 18 io port: [0x6ec0-0x6ec7] [ 0.248194] pci 0000:00:1f.2: reg 1c io port: [0x6ec8-0x6ecb] [ 0.248202] pci 0000:00:1f.2: reg 20 io port: [0x6ee0-0x6eff] [ 0.248210] pci 0000:00:1f.2: reg 24 32bit mmio: [0xfe9fb800-0xfe9fbfff] [ 0.248256] pci 0000:00:1f.2: PME# supported from D3hot [ 0.248306] pci 0000:00:1f.2: PME# disabled [ 0.248386] pci 0000:00:1f.3: reg 10 32bit mmio: [0xfe9fb700-0xfe9fb7ff] [ 0.248413] pci 0000:00:1f.3: reg 20 io port: [0x10c0-0x10df] [ 0.248524] pci 0000:09:00.0: reg 10 64bit mmio: [0xfe8fc000-0xfe8fffff] [ 0.248536] pci 0000:09:00.0: reg 18 io port: [0xde00-0xdeff] [ 0.248628] pci 0000:09:00.0: supports D1 D2 [ 0.248630] pci 0000:09:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.248684] pci 0000:09:00.0: PME# disabled [ 0.248812] pci 0000:00:1c.0: bridge io port: [0xd000-0xdfff] [ 0.248817] pci 0000:00:1c.0: bridge 32bit mmio: [0xfe800000-0xfe8fffff] [ 0.249032] pci 0000:0b:00.0: reg 10 64bit mmio: [0xfe7fc000-0xfe7fffff] [ 0.249255] pci 0000:0b:00.0: supports D1 D2 [ 0.249258] pci 0000:0b:00.0: PME# supported from D0 D3hot D3cold [ 0.249355] pci 0000:0b:00.0: PME# disabled [ 0.249543] pci 0000:00:1c.1: bridge 32bit mmio: [0xfe700000-0xfe7fffff] [ 0.249613] pci 0000:00:1c.4: bridge io port: [0xc000-0xcfff] [ 0.249619] pci 0000:00:1c.4: bridge 32bit mmio: [0xfe400000-0xfe6fffff] [ 0.249627] pci 0000:00:1c.4: bridge 64bit mmio pref: [0xf0000000-0xf01fffff] [ 0.249692] pci 0000:02:09.0: reg 10 32bit mmio: [0xfe3ff800-0xfe3fffff] [ 0.249757] pci 0000:02:09.0: supports D1 D2 [ 0.249759] pci 0000:02:09.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.249811] pci 0000:02:09.0: PME# disabled [ 0.249903] pci 0000:02:09.1: reg 10 32bit mmio: [0xfe3ff400-0xfe3ff4ff] [ 0.249968] pci 0000:02:09.1: supports D1 D2 [ 0.249970] pci 0000:02:09.1: PME# supported from D0 D1 D2 D3hot D3cold [ 0.250022] pci 0000:02:09.1: PME# disabled [ 0.250113] pci 0000:02:09.2: reg 10 32bit mmio: [0xfe3ff500-0xfe3ff5ff] [ 0.250179] pci 0000:02:09.2: supports D1 D2 [ 0.250181] pci 0000:02:09.2: PME# supported from D0 D1 D2 D3hot D3cold [ 0.250234] pci 0000:02:09.2: PME# disabled [ 0.250325] pci 0000:02:09.3: reg 10 32bit mmio: [0xfe3ff600-0xfe3ff6ff] [ 0.250390] pci 0000:02:09.3: supports D1 D2 [ 0.250392] pci 0000:02:09.3: PME# supported from D0 D1 D2 D3hot D3cold [ 0.250444] pci 0000:02:09.3: PME# disabled [ 0.250534] pci 0000:02:09.4: reg 10 32bit mmio: [0xfe3ff700-0xfe3ff7ff] [ 0.250598] pci 0000:02:09.4: supports D1 D2 [ 0.250600] pci 0000:02:09.4: PME# supported from D0 D1 D2 D3hot D3cold [ 0.250652] pci 0000:02:09.4: PME# disabled [ 0.250752] pci 0000:00:1e.0: transparent bridge [ 0.250806] pci 0000:00:1e.0: bridge 32bit mmio: [0xfe300000-0xfe3fffff] [ 0.250841] pci_bus 0000:00: on NUMA node 0 [ 0.250846] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.251095] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIE._PRT] [ 0.251217] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT] [ 0.251288] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT] [ 0.251363] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP05._PRT] [ 0.262672] ACPI: PCI Interrupt Link [LNKA] (IRQs 9 10 *11) [ 0.262986] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 7) *10 [ 0.263297] ACPI: PCI Interrupt Link [LNKC] (IRQs 9 10 11) *5 [ 0.263626] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 7 9 10 11) *0, disabled. [ 0.264068] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 *10 11 12 14 15) [ 0.264636] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 *9 10 11 12 14 15) [ 0.265202] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 *7 9 10 11 12 14 15) [ 0.265756] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. [ 0.266443] SCSI subsystem initialized [ 0.266508] libata version 3.00 loaded. [ 0.266508] usbcore: registered new interface driver usbfs [ 0.266508] usbcore: registered new interface driver hub [ 0.266508] usbcore: registered new device driver usb [ 0.266508] ACPI: WMI: Mapper loaded [ 0.266508] PCI: Using ACPI for IRQ routing [ 0.276009] Bluetooth: Core ver 2.15 [ 0.276067] NET: Registered protocol family 31 [ 0.276067] Bluetooth: HCI device and connection manager initialized [ 0.276107] Bluetooth: HCI socket layer initialized [ 0.276154] NetLabel: Initializing [ 0.276199] NetLabel: domain hash size = 128 [ 0.276245] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.276302] NetLabel: unlabeled traffic allowed by default [ 0.276380] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 0.276549] hpet0: 3 comparators, 64-bit 14.318180 MHz counter [ 0.296007] pnp: PnP ACPI init [ 0.296061] ACPI: bus type pnp registered [ 0.313918] pnp 00:0a: io resource (0x1000-0x1005) overlaps 0000:00:1f.0 BAR 13 (0x1000-0x107f), disabling [ 0.313983] pnp 00:0a: io resource (0x1008-0x100f) overlaps 0000:00:1f.0 BAR 13 (0x1000-0x107f), disabling [ 0.314131] pnp 00:0b: io resource (0x1006-0x1007) overlaps 0000:00:1f.0 BAR 13 (0x1000-0x107f), disabling [ 0.314195] pnp 00:0b: io resource (0x100a-0x1059) overlaps 0000:00:1f.0 BAR 13 (0x1000-0x107f), disabling [ 0.314259] pnp 00:0b: io resource (0x1060-0x107f) overlaps 0000:00:1f.0 BAR 13 (0x1000-0x107f), disabling [ 0.314323] pnp 00:0b: io resource (0x1010-0x102f) overlaps 0000:00:1f.0 BAR 13 (0x1000-0x107f), disabling [ 0.333924] pnp: PnP ACPI: found 13 devices [ 0.333971] ACPI: ACPI bus type pnp unregistered [ 0.334019] PnPBIOS: Disabled by ACPI PNP [ 0.334073] system 00:01: iomem range 0xff800000-0xff8fffff has been reserved [ 0.334124] system 00:01: iomem range 0xffc00000-0xffcfffff has been reserved [ 0.334181] system 00:06: ioport range 0xc80-0xcff could not be reserved [ 0.334235] system 00:09: iomem range 0xfed00000-0xfed003ff has been reserved [ 0.334288] system 00:0a: ioport range 0x900-0x97f has been reserved [ 0.334338] system 00:0a: ioport range 0x4d0-0x4d1 has been reserved [ 0.334391] system 00:0b: ioport range 0xf400-0xf4fe has been reserved [ 0.334441] system 00:0b: ioport range 0x1080-0x10bf has been reserved [ 0.334491] system 00:0b: ioport range 0x10c0-0x10df has been reserved [ 0.334540] system 00:0b: ioport range 0x809-0x809 has been reserved [ 0.334594] system 00:0c: iomem range 0x0-0x9efff could not be reserved [ 0.334644] system 00:0c: iomem range 0x9f000-0x9ffff could not be reserved [ 0.334695] system 00:0c: iomem range 0xc0000-0xcffff could not be reserved [ 0.334746] system 00:0c: iomem range 0xe0000-0xfffff could not be reserved [ 0.334796] system 00:0c: iomem range 0x100000-0xbf66d7ff could not be reserved [ 0.334856] system 00:0c: iomem range 0xbf66d800-0xbf6fffff has been reserved [ 0.334911] system 00:0c: iomem range 0xbf700000-0xbf7fffff has been reserved [ 0.334962] system 00:0c: iomem range 0xbf700000-0xbfefffff could not be reserved [ 0.335022] system 00:0c: iomem range 0xffe00000-0xffffffff has been reserved [ 0.335073] system 00:0c: iomem range 0xffa00000-0xffbfffff has been reserved [ 0.335125] system 00:0c: iomem range 0xfec00000-0xfec0ffff could not be reserved [ 0.335185] system 00:0c: iomem range 0xfee00000-0xfee0ffff has been reserved [ 0.335236] system 00:0c: iomem range 0xfed20000-0xfed8ffff has been reserved [ 0.335287] system 00:0c: iomem range 0xfeda0000-0xfeda3fff has been reserved [ 0.335338] system 00:0c: iomem range 0xfeda4000-0xfeda4fff has been reserved [ 0.335389] system 00:0c: iomem range 0xfeda5000-0xfeda5fff has been reserved [ 0.335440] system 00:0c: iomem range 0xfeda6000-0xfeda6fff has been reserved [ 0.335491] system 00:0c: iomem range 0xfed18000-0xfed1bfff has been reserved [ 0.335542] system 00:0c: iomem range 0xf8000000-0xfbffffff has been reserved [ 0.370251] AppArmor: AppArmor Filesystem Enabled [ 0.370357] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:09 [ 0.370408] pci 0000:00:1c.0: IO window: 0xd000-0xdfff [ 0.370461] pci 0000:00:1c.0: MEM window: 0xfe800000-0xfe8fffff [ 0.370513] pci 0000:00:1c.0: PREFETCH window: disabled [ 0.370564] pci 0000:00:1c.1: PCI bridge, secondary bus 0000:0b [ 0.370612] pci 0000:00:1c.1: IO window: disabled [ 0.370663] pci 0000:00:1c.1: MEM window: 0xfe700000-0xfe7fffff [ 0.370715] pci 0000:00:1c.1: PREFETCH window: disabled [ 0.370765] pci 0000:00:1c.4: PCI bridge, secondary bus 0000:0c [ 0.370815] pci 0000:00:1c.4: IO window: 0xc000-0xcfff [ 0.370868] pci 0000:00:1c.4: MEM window: 0xfe400000-0xfe6fffff [ 0.370920] pci 0000:00:1c.4: PREFETCH window: 0x000000f0000000-0x000000f01fffff [ 0.370987] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:02 [ 0.371034] pci 0000:00:1e.0: IO window: disabled [ 0.371086] pci 0000:00:1e.0: MEM window: 0xfe300000-0xfe3fffff [ 0.371137] pci 0000:00:1e.0: PREFETCH window: disabled [ 0.371197] alloc irq_desc for 16 on node -1 [ 0.371199] alloc kstat_irqs on node -1 [ 0.371205] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.371258] pci 0000:00:1c.0: setting latency timer to 64 [ 0.371267] alloc irq_desc for 17 on node -1 [ 0.371269] alloc kstat_irqs on node -1 [ 0.371272] pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 0.371325] pci 0000:00:1c.1: setting latency timer to 64 [ 0.371335] pci 0000:00:1c.4: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.371388] pci 0000:00:1c.4: setting latency timer to 64 [ 0.371397] pci 0000:00:1e.0: setting latency timer to 64 [ 0.371401] pci_bus 0000:00: resource 0 io: [0x00-0xffff] [ 0.371404] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff] [ 0.371407] pci_bus 0000:09: resource 0 io: [0xd000-0xdfff] [ 0.371409] pci_bus 0000:09: resource 1 mem: [0xfe800000-0xfe8fffff] [ 0.371412] pci_bus 0000:0b: resource 1 mem: [0xfe700000-0xfe7fffff] [ 0.371415] pci_bus 0000:0c: resource 0 io: [0xc000-0xcfff] [ 0.371417] pci_bus 0000:0c: resource 1 mem: [0xfe400000-0xfe6fffff] [ 0.371420] pci_bus 0000:0c: resource 2 pref mem [0xf0000000-0xf01fffff] [ 0.371422] pci_bus 0000:02: resource 1 mem: [0xfe300000-0xfe3fffff] [ 0.371425] pci_bus 0000:02: resource 3 io: [0x00-0xffff] [ 0.371427] pci_bus 0000:02: resource 4 mem: [0x000000-0xffffffff] [ 0.371459] NET: Registered protocol family 2 [ 0.371592] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.371946] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.372457] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 0.372728] TCP: Hash tables configured (established 131072 bind 65536) [ 0.372777] TCP reno registered [ 0.372889] NET: Registered protocol family 1 [ 0.372988] Trying to unpack rootfs image as initramfs... [ 0.502838] Switched to high resolution mode on CPU 1 [ 0.503981] Switched to high resolution mode on CPU 0 [ 0.570020] Freeing initrd memory: 7715k freed [ 0.573983] Simple Boot Flag at 0x79 set to 0x1 [ 0.574210] cpufreq-nforce2: No nForce2 chipset. [ 0.574283] Scanning for low memory corruption every 60 seconds [ 0.574430] audit: initializing netlink socket (disabled) [ 0.574495] type=2000 audit(1256598242.572:1): initialized [ 0.583168] highmem bounce pool size: 64 pages [ 0.583218] HugeTLB registered 4 MB page size, pre-allocated 0 pages [ 0.584726] VFS: Disk quotas dquot_6.5.2 [ 0.584833] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.585411] fuse init (API version 7.12) [ 0.585534] msgmni has been set to 1680 [ 0.585783] alg: No test for stdrng (krng) [ 0.585842] io scheduler noop registered [ 0.585888] io scheduler anticipatory registered [ 0.585935] io scheduler deadline registered [ 0.586686] io scheduler cfq registered (default) [ 0.586743] pci 0000:00:02.0: Boot video device [ 0.587030] alloc irq_desc for 24 on node -1 [ 0.587032] alloc kstat_irqs on node -1 [ 0.587045] pcieport-driver 0000:00:1c.0: irq 24 for MSI/MSI-X [ 0.587057] pcieport-driver 0000:00:1c.0: setting latency timer to 64 [ 0.587219] alloc irq_desc for 25 on node -1 [ 0.587221] alloc kstat_irqs on node -1 [ 0.587230] pcieport-driver 0000:00:1c.1: irq 25 for MSI/MSI-X [ 0.587241] pcieport-driver 0000:00:1c.1: setting latency timer to 64 [ 0.587406] alloc irq_desc for 26 on node -1 [ 0.587408] alloc kstat_irqs on node -1 [ 0.587417] pcieport-driver 0000:00:1c.4: irq 26 for MSI/MSI-X [ 0.587428] pcieport-driver 0000:00:1c.4: setting latency timer to 64 [ 0.587537] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.587678] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 0.587873] ACPI: AC Adapter [AC] (on-line) [ 0.587991] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input0 [ 0.588741] ACPI: Lid Switch [LID] [ 0.588829] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1 [ 0.588894] ACPI: Power Button [PBTN] [ 0.588982] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2 [ 0.589043] ACPI: Sleep Button [SBTN] [ 0.589682] ACPI: SSDT bf66e57a 00202 (v01 PmRef Cpu0Ist 00003000 INTL 20050624) [ 0.590278] ACPI: SSDT bf66df10 005E5 (v01 PmRef Cpu0Cst 00003001 INTL 20050624) [ 0.590736] Monitor-Mwait will be used to enter C-1 state [ 0.590760] Monitor-Mwait will be used to enter C-2 state [ 0.590781] Monitor-Mwait will be used to enter C-3 state [ 0.590788] Marking TSC unstable due to TSC halts in idle [ 0.590854] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3]) [ 0.591044] processor LNXCPU:00: registered as cooling_device0 [ 0.591094] ACPI: Processor [CPU0] (supports 8 throttling states) [ 0.591519] ACPI: SSDT bf66e77c 000C4 (v01 PmRef Cpu1Ist 00003000 INTL 20050624) [ 0.591932] ACPI: SSDT bf66e4f5 00085 (v01 PmRef Cpu1Cst 00003000 INTL 20050624) [ 0.592517] ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3]) [ 0.592708] processor LNXCPU:01: registered as cooling_device1 [ 0.592758] ACPI: Processor [CPU1] (supports 8 throttling states) [ 0.594533] thermal LNXTHERM:01: registered as thermal_zone0 [ 0.594587] ACPI: Thermal Zone [THM] (40 C) [ 0.594689] isapnp: Scanning for PnP cards... [ 0.713930] ACPI: Battery Slot [BAT0] (battery present) [ 0.949799] isapnp: No Plug & Play device found [ 0.950919] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.952273] brd: module loaded [ 0.952749] loop: module loaded [ 0.952859] input: Macintosh mouse button emulation as /devices/virtual/input/input3 [ 0.952986] ahci 0000:00:1f.2: version 3.0 [ 0.953011] ahci 0000:00:1f.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 0.953091] alloc irq_desc for 27 on node -1 [ 0.953093] alloc kstat_irqs on node -1 [ 0.953104] ahci 0000:00:1f.2: irq 27 for MSI/MSI-X [ 0.953173] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 3 ports 3 Gbps 0x5 impl SATA mode [ 0.953235] ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ems [ 0.953299] ahci 0000:00:1f.2: setting latency timer to 64 [ 0.961059] scsi0 : ahci [ 0.961181] scsi1 : ahci [ 0.961279] scsi2 : ahci [ 0.961527] ata1: SATA max UDMA/133 abar m2048@0xfe9fb800 port 0xfe9fb900 irq 27 [ 0.961587] ata2: DUMMY [ 0.961633] ata3: SATA max UDMA/133 abar m2048@0xfe9fb800 port 0xfe9fba00 irq 27 [ 0.961736] ata_piix 0000:00:1f.1: version 2.13 [ 0.961744] ata_piix 0000:00:1f.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.961829] ata_piix 0000:00:1f.1: setting latency timer to 64 [ 0.961898] scsi3 : ata_piix [ 0.961995] scsi4 : ata_piix [ 0.962602] ata4: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x6fa0 irq 14 [ 0.962653] ata5: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x6fa8 irq 15 [ 0.963573] Fixed MDIO Bus: probed [ 0.963650] PPP generic driver version 2.4.2 [ 0.963773] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.963838] alloc irq_desc for 22 on node -1 [ 0.963840] alloc kstat_irqs on node -1 [ 0.963845] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 22 (level, low) -> IRQ 22 [ 0.963905] ehci_hcd 0000:00:1a.7: setting latency timer to 64 [ 0.963909] ehci_hcd 0000:00:1a.7: EHCI Host Controller [ 0.963997] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1 [ 0.967980] ehci_hcd 0000:00:1a.7: debug port 1 [ 0.968039] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported [ 0.968052] ehci_hcd 0000:00:1a.7: irq 22, io mem 0xfed1c400 [ 0.972211] ata5: port disabled. ignoring. [ 0.981013] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00 [ 0.981129] usb usb1: configuration #1 chosen from 1 choice [ 0.981204] hub 1-0:1.0: USB hub found [ 0.981254] hub 1-0:1.0: 4 ports detected [ 0.981354] alloc irq_desc for 20 on node -1 [ 0.981356] alloc kstat_irqs on node -1 [ 0.981360] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 20 (level, low) -> IRQ 20 [ 0.981419] ehci_hcd 0000:00:1d.7: setting latency timer to 64 [ 0.981422] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 0.981497] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2 [ 0.985467] ehci_hcd 0000:00:1d.7: debug port 1 [ 0.985519] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported [ 0.985532] ehci_hcd 0000:00:1d.7: irq 20, io mem 0xfed1c000 [ 1.000025] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 1.000142] usb usb2: configuration #1 chosen from 1 choice [ 1.000214] hub 2-0:1.0: USB hub found [ 1.000264] hub 2-0:1.0: 6 ports detected [ 1.000371] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.000436] uhci_hcd: USB Universal Host Controller Interface driver [ 1.000506] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 [ 1.000560] uhci_hcd 0000:00:1a.0: setting latency timer to 64 [ 1.000564] uhci_hcd 0000:00:1a.0: UHCI Host Controller [ 1.000642] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3 [ 1.000728] uhci_hcd 0000:00:1a.0: irq 20, io base 0x00006f20 [ 1.000848] usb usb3: configuration #1 chosen from 1 choice [ 1.000920] hub 3-0:1.0: USB hub found [ 1.000970] hub 3-0:1.0: 2 ports detected [ 1.001070] alloc irq_desc for 21 on node -1 [ 1.001072] alloc kstat_irqs on node -1 [ 1.001076] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 [ 1.001131] uhci_hcd 0000:00:1a.1: setting latency timer to 64 [ 1.001135] uhci_hcd 0000:00:1a.1: UHCI Host Controller [ 1.001208] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4 [ 1.001301] uhci_hcd 0000:00:1a.1: irq 21, io base 0x00006f00 [ 1.001424] usb usb4: configuration #1 chosen from 1 choice [ 1.001495] hub 4-0:1.0: USB hub found [ 1.001545] hub 4-0:1.0: 2 ports detected [ 1.001639] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 [ 1.001693] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [ 1.001696] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 1.001770] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5 [ 1.001854] uhci_hcd 0000:00:1d.0: irq 20, io base 0x00006f80 [ 1.001977] usb usb5: configuration #1 chosen from 1 choice [ 1.002051] hub 5-0:1.0: USB hub found [ 1.002101] hub 5-0:1.0: 2 ports detected [ 1.002191] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 [ 1.002246] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [ 1.002249] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 1.002322] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6 [ 1.002407] uhci_hcd 0000:00:1d.1: irq 21, io base 0x00006f60 [ 1.002528] usb usb6: configuration #1 chosen from 1 choice [ 1.002601] hub 6-0:1.0: USB hub found [ 1.002653] hub 6-0:1.0: 2 ports detected [ 1.002743] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22 [ 1.002798] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [ 1.002801] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 1.002874] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7 [ 1.002959] uhci_hcd 0000:00:1d.2: irq 22, io base 0x00006f40 [ 1.003087] usb usb7: configuration #1 chosen from 1 choice [ 1.003159] hub 7-0:1.0: USB hub found [ 1.003208] hub 7-0:1.0: 2 ports detected [ 1.003353] PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 1.022937] i8042.c: Detected active multiplexing controller, rev 1.1. [ 1.035805] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.035855] serio: i8042 AUX0 port at 0x60,0x64 irq 12 [ 1.035903] serio: i8042 AUX1 port at 0x60,0x64 irq 12 [ 1.035951] serio: i8042 AUX2 port at 0x60,0x64 irq 12 [ 1.035999] serio: i8042 AUX3 port at 0x60,0x64 irq 12 [ 1.036102] mice: PS/2 mouse device common for all mice [ 1.036250] rtc_cmos 00:04: RTC can wake from S4 [ 1.036325] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0 [ 1.036404] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs [ 1.036546] device-mapper: uevent: version 1.0.3 [ 1.037211] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com [ 1.037356] device-mapper: multipath: version 1.1.0 loaded [ 1.037408] device-mapper: multipath round-robin: version 1.0.0 loaded [ 1.037570] EISA: Probing bus 0 at eisa.0 [ 1.037622] Cannot allocate resource for EISA slot 1 [ 1.037697] EISA: Detected 0 cards. [ 1.037910] cpuidle: using governor ladder [ 1.038072] cpuidle: using governor menu [ 1.038591] TCP cubic registered [ 1.038784] NET: Registered protocol family 10 [ 1.039259] lo: Disabled Privacy Extensions [ 1.039623] NET: Registered protocol family 17 [ 1.039682] Bluetooth: L2CAP ver 2.13 [ 1.039727] Bluetooth: L2CAP socket layer initialized [ 1.039776] Bluetooth: SCO (Voice Link) ver 0.6 [ 1.039822] Bluetooth: SCO socket layer initialized [ 1.039900] Bluetooth: RFCOMM TTY layer initialized [ 1.039953] Bluetooth: RFCOMM socket layer initialized [ 1.040000] Bluetooth: RFCOMM ver 1.11 [ 1.040536] Using IPI No-Shortcut mode [ 1.040635] PM: Resume from disk failed. [ 1.040647] registered taskstats version 1 [ 1.040812] Magic number: 13:931:100 [ 1.040947] rtc_cmos 00:04: setting system clock to 2009-10-26 23:04:03 UTC (1256598243) [ 1.041019] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 1.041081] EDD information not available. [ 1.067065] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4 [ 1.152448] ata4.00: ATAPI: TSSTcorp DVD+/-RW TS-L632H, D600, max UDMA/33 [ 1.184351] ata4.00: configured for UDMA/33 [ 1.328357] usb 1-1: new high speed USB device using ehci_hcd and address 2 [ 1.328379] ata3: SATA link down (SStatus 0 SControl 300) [ 1.328500] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1.375247] ata1.00: ATA-8: WDC WD2500BEVT-75ZCT2, 11.01A11, max UDMA/133 [ 1.375303] ata1.00: 488397168 sectors, multi 8: LBA48 NCQ (depth 31/32) [ 1.377315] ata1.00: configured for UDMA/133 [ 1.392191] scsi 0:0:0:0: Direct-Access ATA WDC WD2500BEVT-7 11.0 PQ: 0 ANSI: 5 [ 1.392359] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 1.392441] sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB) [ 1.392540] sd 0:0:0:0: [sda] Write Protect is off [ 1.392586] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.392609] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.392783] sda: [ 1.395191] scsi 3:0:0:0: CD-ROM TSSTcorp DVD+-RW TS-L632H D600 PQ: 0 ANSI: 5 [ 1.400252] sda1 sda2 sda3 sda4 [ 1.436006] sd 0:0:0:0: [sda] Attached SCSI disk [ 1.436079] Freeing unused kernel memory: 540k freed [ 1.436453] Write protecting the kernel text: 4568k [ 1.436555] Write protecting the kernel read-only data: 1836k [ 1.466099] usb 1-1: configuration #1 chosen from 1 choice [ 1.504031] Clocksource tsc unstable (delta = -201668689 ns) [ 1.547383] Linux agpgart interface v0.103 [ 1.550222] agpgart-intel 0000:00:00.0: Intel 965GM Chipset [ 1.551039] agpgart-intel 0000:00:00.0: detected 7676K stolen memory [ 1.553905] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xe0000000 [ 1.607292] [drm] Initialized drm 1.1.0 20060810 [ 1.655937] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 1.655994] i915 0000:00:02.0: setting latency timer to 64 [ 1.658230] alloc irq_desc for 28 on node -1 [ 1.658234] alloc kstat_irqs on node -1 [ 1.658243] i915 0000:00:02.0: irq 28 for MSI/MSI-X [ 1.660768] sky2 driver version 1.23 [ 1.660852] sky2 0000:09:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 1.660912] sky2 0000:09:00.0: setting latency timer to 64 [ 1.660936] sky2 0000:09:00.0: Yukon-2 FE+ chip revision 0 [ 1.661103] alloc irq_desc for 29 on node -1 [ 1.661105] alloc kstat_irqs on node -1 [ 1.661121] sky2 0000:09:00.0: irq 29 for MSI/MSI-X [ 1.661778] sky2 eth0: addr 00:23:ae:eb:15:57 [ 1.711586] ohci1394 0000:02:09.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 1.771055] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[16] MMIO=[fe3ff800-fe3fffff] Max Packet=[2048] IR/IT contexts=[4/4] [ 1.889083] usb 6-2: new low speed USB device using uhci_hcd and address 2 [ 2.065571] usb 6-2: configuration #1 chosen from 1 choice [ 2.077530] usbcore: registered new interface driver hiddev [ 2.091712] input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:1d.1/usb6/6-2/6-2:1.0/input/input5 [ 2.091848] generic-usb 0003:046D:C045.0001: input,hidraw0: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:1d.1-2/input0 [ 2.091924] usbcore: registered new interface driver usbhid [ 2.091970] usbhid: v2.6:USB HID core driver [ 2.606565] [drm] TV-16: set mode NTSC 480i 0 [ 2.744099] [drm] fb0: inteldrmfb frame buffer device [ 2.755286] acpi device:31: registered as cooling_device2 [ 2.755684] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A03:00/device:2e/input/input6 [ 2.755777] ACPI: Video Device [VID] (multi-head: yes rom: no post: no) [ 2.755871] ACPI Warning: \_SB_.PCI0.VID2._DOD: Return Package has no elements (empty) 20090521 nspredef-434 [ 2.756068] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A03:00/device:33/input/input7 [ 2.756151] ACPI: Video Device [VID2] (multi-head: yes rom: no post: no) [ 2.756217] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0 [ 2.837417] [drm] LVDS-8: set mode 1280x800 19 [ 3.045130] ieee1394: Host added: ID:BUS[0-00:1023] GUID[464fc000226d5201] [ 3.087122] Console: switching to colour frame buffer device 160x50 [ 3.234822] xor: automatically using best checksumming function: pIII_sse [ 3.253009] pIII_sse : 7621.000 MB/sec [ 3.253011] xor: using function: pIII_sse (7621.000 MB/sec) [ 3.255351] device-mapper: dm-raid45: initialized v0.2594b [ 3.537743] PM: Starting manual resume from disk [ 3.537747] PM: Resume from partition 8:1 [ 3.537750] PM: Checking hibernation image. [ 3.537933] PM: Resume from disk failed. [ 3.550193] EXT4-fs (sda2): barriers enabled [ 3.568112] kjournald2 starting: pid 432, dev sda2:8, commit interval 5 seconds [ 3.568121] EXT4-fs (sda2): delayed allocation enabled [ 3.568125] EXT4-fs: file extents enabled [ 3.568867] EXT4-fs: mballoc enabled [ 3.568880] EXT4-fs (sda2): mounted filesystem with ordered data mode [ 4.055665] type=1505 audit(1256598246.512:2): operation="profile_load" pid=458 name=/usr/share/gdm/guest-session/Xsession [ 4.058308] type=1505 audit(1256598246.516:3): operation="profile_load" pid=459 name=/sbin/dhclient3 [ 4.059032] type=1505 audit(1256598246.516:4): operation="profile_load" pid=459 name=/usr/lib/NetworkManager/nm-dhcp-client.action [ 4.059424] type=1505 audit(1256598246.516:5): operation="profile_load" pid=459 name=/usr/lib/connman/scripts/dhclient-script [ 4.083454] type=1505 audit(1256598246.540:6): operation="profile_load" pid=460 name=/usr/bin/evince [ 4.094679] type=1505 audit(1256598246.552:7): operation="profile_load" pid=460 name=/usr/bin/evince-previewer [ 4.101291] type=1505 audit(1256598246.560:8): operation="profile_load" pid=460 name=/usr/bin/evince-thumbnailer [ 4.119750] type=1505 audit(1256598246.576:9): operation="profile_load" pid=462 name=/usr/lib/cups/backend/cups-pdf [ 4.120598] type=1505 audit(1256598246.576:10): operation="profile_load" pid=462 name=/usr/sbin/cupsd [ 4.765744] Adding 240932k swap on /dev/sda1. Priority:-1 extents:1 across:240932k [ 5.289442] udev: starting version 147 [ 5.917985] ip_tables: (C) 2000-2006 Netfilter Core Team [ 6.061799] lp: driver loaded but no devices found [ 6.086236] lib80211: common routines for IEEE802.11 drivers [ 6.086239] lib80211_crypt: registered algorithm 'NULL' [ 6.271383] wl: module license 'MIXED/Proprietary' taints kernel. [ 6.271388] Disabling lock debugging due to kernel taint [ 6.273485] wl 0000:0b:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 6.273499] wl 0000:0b:00.0: setting latency timer to 64 [ 6.274570] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2) [ 6.289973] ricoh-mmc: Ricoh MMC Controller disabling driver [ 6.289975] ricoh-mmc: Copyright(c) Philip Langdale [ 6.290001] ricoh-mmc: Ricoh MMC controller found at 0000:02:09.2 [1180:0843] (rev 12) [ 6.290020] ricoh-mmc: Controller is now disabled. [ 6.305172] sdhci: Secure Digital Host Controller Interface driver [ 6.305175] sdhci: Copyright(c) Pierre Ossman [ 6.331982] sdhci-pci 0000:02:09.1: SDHCI controller found [1180:0822] (rev 22) [ 6.332018] alloc irq_desc for 18 on node -1 [ 6.332021] alloc kstat_irqs on node -1 [ 6.332027] sdhci-pci 0000:02:09.1: PCI INT B -> GSI 18 (level, low) -> IRQ 18 [ 6.334085] Registered led device: mmc0:: [ 6.334844] Linux video capture interface: v2.00 [ 6.335113] mmc0: SDHCI controller on PCI [0000:02:09.1] using DMA [ 6.429896] input: Dell WMI hotkeys as /devices/virtual/input/input8 [ 6.430650] lib80211_crypt: registered algorithm 'TKIP' [ 6.431549] eth1: Broadcom BCM4315 802.11 Wireless Controller 5.10.91.9 [ 6.433610] uvcvideo: Found UVC 1.00 device Laptop Integrated Webcam (05a9:2640) [ 6.435400] uvcvideo: UVC non compliance - GET_DEF(PROBE) not supported. Enabling workaround. [ 6.435992] input: Laptop Integrated Webcam as /devices/pci0000:00/0000:00:1a.7/usb1/1-1/1-1:1.0/input/input9 [ 6.436041] usbcore: registered new interface driver uvcvideo [ 6.436044] USB Video Class driver (v0.1.0) [ 6.734981] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21 [ 6.735009] HDA Intel 0000:00:1b.0: setting latency timer to 64 [ 6.830092] EXT4-fs (sda2): internal journal on sda2:8 [ 6.863665] input: PS/2 Mouse as /devices/platform/i8042/serio2/input/input10 [ 6.889785] input: AlpsPS/2 ALPS GlidePoint as /devices/platform/i8042/serio2/input/input11 [ 7.006062] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input12 [ 7.072223] HDMI already defined [ 7.232191] input: HDA Intel Mic at Ext Front Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13 [ 7.232267] input: HDA Intel HP Out at Ext Front Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14 [ 7.232321] input: HDA Intel HP Out at Ext Front Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input15 [ 7.807736] EXT4-fs (sda3): barriers enabled [ 7.868427] kjournald2 starting: pid 909, dev sda3:8, commit interval 5 seconds [ 7.903286] EXT4-fs (sda3): internal journal on sda3:8 [ 7.903292] EXT4-fs (sda3): delayed allocation enabled [ 7.903295] EXT4-fs: file extents enabled [ 7.904030] EXT4-fs: mballoc enabled [ 7.904045] EXT4-fs (sda3): mounted filesystem with ordered data mode [ 8.147313] EXT4-fs (sda5): barriers enabled [ 8.150889] kjournald2 starting: pid 940, dev sda5:8, commit interval 5 seconds [ 8.151576] EXT4-fs (sda5): internal journal on sda5:8 [ 8.151581] EXT4-fs (sda5): delayed allocation enabled [ 8.151584] EXT4-fs: file extents enabled [ 8.152435] EXT4-fs: mballoc enabled [ 8.152450] EXT4-fs (sda5): mounted filesystem with ordered data mode [ 8.323884] EXT4-fs (sda6): barriers enabled [ 8.324193] kjournald2 starting: pid 949, dev sda6:8, commit interval 5 seconds [ 8.324442] EXT4-fs (sda6): internal journal on sda6:8 [ 8.324448] EXT4-fs (sda6): delayed allocation enabled [ 8.324452] EXT4-fs: file extents enabled [ 8.325190] EXT4-fs: mballoc enabled [ 8.325204] EXT4-fs (sda6): mounted filesystem with ordered data mode [ 9.339903] EXT4-fs (sda7): barriers enabled [ 9.341759] kjournald2 starting: pid 955, dev sda7:8, commit interval 5 seconds [ 9.342058] EXT4-fs (sda7): internal journal on sda7:8 [ 9.342065] EXT4-fs (sda7): delayed allocation enabled [ 9.342070] EXT4-fs: file extents enabled [ 9.352268] EXT4-fs: mballoc enabled [ 9.352283] EXT4-fs (sda7): mounted filesystem with ordered data mode [ 10.349752] __ratelimit: 9 callbacks suppressed [ 10.349755] type=1505 audit(1256598252.808:14): operation="profile_replace" pid=1028 name=/usr/share/gdm/guest-session/Xsession [ 10.351455] type=1505 audit(1256598252.808:15): operation="profile_replace" pid=1029 name=/sbin/dhclient3 [ 10.352183] type=1505 audit(1256598252.808:16): operation="profile_replace" pid=1029 name=/usr/lib/NetworkManager/nm-dhcp-client.action [ 10.352575] type=1505 audit(1256598252.808:17): operation="profile_replace" pid=1029 name=/usr/lib/connman/scripts/dhclient-script [ 10.356330] type=1505 audit(1256598252.812:18): operation="profile_replace" pid=1030 name=/usr/bin/evince [ 10.367616] type=1505 audit(1256598252.824:19): operation="profile_replace" pid=1030 name=/usr/bin/evince-previewer [ 10.376184] type=1505 audit(1256598252.832:20): operation="profile_replace" pid=1030 name=/usr/bin/evince-thumbnailer [ 10.390618] type=1505 audit(1256598252.848:21): operation="profile_replace" pid=1032 name=/usr/lib/cups/backend/cups-pdf [ 10.391463] type=1505 audit(1256598252.848:22): operation="profile_replace" pid=1032 name=/usr/sbin/cupsd [ 10.397320] type=1505 audit(1256598252.856:23): operation="profile_replace" pid=1033 name=/usr/sbin/mysqld-akonadi [ 16.376449] [drm] TV-16: set mode NTSC 480i 0 [ 16.543554] [drm] TV-16: set mode NTSC 480i 0 [ 16.903766] [drm] TV-16: set mode NTSC 480i 0 [ 17.070379] [drm] TV-16: set mode NTSC 480i 0 [ 20.202558] ppdev: user-space parallel port driver [ 25.777055] eth1: no IPv6 routers present [ 26.570495] sky2 eth0: enabling interface [ 26.570685] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 29.396219] sky2 eth0: disabling interface [ 29.402397] sky2 eth0: enabling interface [ 29.402588] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 39.184907] [drm] TV-16: set mode NTSC 480i 0 [ 39.350185] [drm] TV-16: set mode NTSC 480i 0 [ 39.740033] eth1: no IPv6 routers present [ 39.991691] [drm] TV-16: set mode NTSC 480i 0 [ 40.156944] [drm] TV-16: set mode NTSC 480i 0 [ 89.530671] [drm] TV-16: set mode NTSC 480i 0 [ 89.696221] [drm] TV-16: set mode NTSC 480i 0 [ 90.012010] [drm] TV-16: set mode NTSC 480i 0 [ 90.176979] [drm] TV-16: set mode NTSC 480i 0 [ 90.492010] [drm] TV-16: set mode NTSC 480i 0 [ 90.657394] [drm] TV-16: set mode NTSC 480i 0 [ 186.901271] CE: hpet increasing min_delta_ns to 15000 nsec 00:00.0 Host bridge [0600]: Intel Corporation Mobile PM965/GM965/GL960 Memory Controller Hub [8086:2a00] (rev 0c) Subsystem: Dell Device [1028:022f] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- SERR- Kernel driver in use: agpgart-intel Kernel modules: intel-agp 00:02.0 VGA compatible controller [0300]: Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller [8086:2a02] (rev 0c) Subsystem: Dell Device [1028:022f] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- Capabilities: [130] Root Complex Link Kernel driver in use: HDA Intel Kernel modules: snd-hda-intel 00:1c.0 PCI bridge [0604]: Intel Corporation 82801H (ICH8 Family) PCI Express Port 1 [8086:283f] (rev 02) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- TAbort- Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: [40] Express (v1) Root Port (Slot+), MSI 00 DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s unlimited, L1 unlimited ExtTag- RBE+ FLReset- DevCtl: Report errors: Correctable- Non-Fatal- Fatal+ Unsupported- RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- MaxPayload 128 bytes, MaxReadReq 128 bytes DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend- LnkCap: Port #1, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <256ns, L1 <4us ClockPM- Suprise- LLActRep+ BwNot- LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+ ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive+ BWMgmt- ABWMgmt- SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surpise+ Slot # 2, PowerLimit 6.500000; Interlock- NoCompl- SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet+ CmdCplt- HPIrq- LinkChg- Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock- SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock- Changed: MRL- PresDet- LinkState- RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal+ PMEIntEna- CRSVisible- RootCap: CRSVisible- RootSta: PME ReqID 0000, PMEStatus- PMEPending- Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable+ Address: fee0300c Data: 4159 Capabilities: [90] Subsystem: Dell Device [1028:022f] Capabilities: [a0] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Capabilities: [100] Virtual Channel Capabilities: [180] Root Complex Link Kernel driver in use: pcieport-driver Kernel modules: shpchp 00:1c.1 PCI bridge [0604]: Intel Corporation 82801H (ICH8 Family) PCI Express Port 2 [8086:2841] (rev 02) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- TAbort- Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: [40] Express (v1) Root Port (Slot+), MSI 00 DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s unlimited, L1 unlimited ExtTag- RBE+ FLReset- DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported- RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- MaxPayload 128 bytes, MaxReadReq 128 bytes DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend- LnkCap: Port #2, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <256ns, L1 <4us ClockPM- Suprise- LLActRep+ BwNot- LnkCtl: ASPM L0s L1 Enabled; RCB 64 bytes Disabled- Retrain- CommClk+ ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive+ BWMgmt- ABWMgmt- SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surpise+ Slot # 3, PowerLimit 6.500000; Interlock- NoCompl- SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet+ CmdCplt- HPIrq- LinkChg- Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock- SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock- Changed: MRL- PresDet- LinkState- RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible- RootCap: CRSVisible- RootSta: PME ReqID 0000, PMEStatus- PMEPending- Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable+ Address: fee0300c Data: 4161 Capabilities: [90] Subsystem: Dell Device [1028:022f] Capabilities: [a0] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Capabilities: [100] Virtual Channel Capabilities: [180] Root Complex Link Kernel driver in use: pcieport-driver Kernel modules: shpchp 00:1c.4 PCI bridge [0604]: Intel Corporation 82801H (ICH8 Family) PCI Express Port 5 [8086:2847] (rev 02) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- TAbort- Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: [40] Express (v1) Root Port (Slot+), MSI 00 DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s unlimited, L1 unlimited ExtTag- RBE+ FLReset- DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported- RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- MaxPayload 128 bytes, MaxReadReq 128 bytes DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend- LnkCap: Port #5, Speed 2.5GT/s, Width x1, ASPM unknown, Latency L0 <1us, L1 <4us ClockPM- Suprise- LLActRep+ BwNot- LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk- ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- LnkSta: Speed 2.5GT/s, Width x0, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt- SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surpise+ Slot # 2, PowerLimit 6.500000; Interlock- NoCompl- SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet+ CmdCplt- HPIrq- LinkChg- Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock- SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet- Interlock- Changed: MRL- PresDet- LinkState- RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible- RootCap: CRSVisible- RootSta: PME ReqID 0000, PMEStatus- PMEPending- Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable+ Address: fee0300c Data: 4169 Capabilities: [90] Subsystem: Dell Device [1028:022f] Capabilities: [a0] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Capabilities: [100] Virtual Channel Capabilities: [180] Root Complex Link Kernel driver in use: pcieport-driver Kernel modules: shpchp 00:1d.0 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #1 [8086:2830] (rev 02) Subsystem: Dell Device [1028:022f] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: [50] Subsystem: Dell Device [1028:022f] 00:1f.0 ISA bridge [0601]: Intel Corporation 82801HEM (ICH8M) LPC Interface Controller [8086:2815] (rev 02) Subsystem: Dell Device [1028:022f] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- SERR- Kernel modules: iTCO_wdt 00:1f.1 IDE interface [0101]: Intel Corporation 82801HBM/HEM (ICH8M/ICH8M-E) IDE Controller [8086:2850] (rev 02) (prog-if 8a [Master SecP PriP]) Subsystem: Dell Device [1028:022f] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR- TAbort- SERR- Kernel driver in use: ahci 00:1f.3 SMBus [0c05]: Intel Corporation 82801H (ICH8 Family) SMBus Controller [8086:283e] (rev 02) Subsystem: Dell Device [1028:022f] Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- Capabilities: [130] Device Serial Number 00-23-ae-ff-ff-eb-15-57 Kernel driver in use: sky2 Kernel modules: sky2 0b:00.0 Network controller [0280]: Broadcom Corporation BCM4312 802.11b/g [14e4:4315] (rev 01) Subsystem: Dell Device [1028:000b] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- Capabilities: [e8] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable- Address: 0000000000000000 Data: 0000 Capabilities: [d0] Express (v1) Endpoint, MSI 00 DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <4us, L1 unlimited ExtTag+ AttnBtn- AttnInd- PwrInd- RBE+ FLReset- DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported- RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- MaxPayload 128 bytes, MaxReadReq 128 bytes DevSta: CorrErr+ UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend- LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <4us, L1 <64us ClockPM+ Suprise- LLActRep- BwNot- LnkCtl: ASPM L0s L1 Enabled; RCB 64 bytes Disabled- Retrain- CommClk+ ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt- Capabilities: [100] Advanced Error Reporting Capabilities: [13c] Virtual Channel Capabilities: [160] Device Serial Number 24-00-b1-ff-ff-2b-24-1b Capabilities: [16c] Power Budgeting Kernel driver in use: wl Kernel modules: wl, ssb