[ 32.841253] ppdev: user-space parallel port driver [ 39.300037] eth0: no IPv6 routers present [ 40.307429] i2c-adapter i2c-2: unable to read EDID block. [ 40.307434] i915 0000:00:02.0: HDMI Type A-1: no EDID data [ 40.312067] i2c-adapter i2c-2: unable to read EDID block. [ 40.312069] i915 0000:00:02.0: HDMI Type A-1: no EDID data [ 40.497993] i2c-adapter i2c-2: unable to read EDID block. [ 40.497997] i915 0000:00:02.0: HDMI Type A-1: no EDID data [ 40.502637] i2c-adapter i2c-2: unable to read EDID block. [ 40.502640] i915 0000:00:02.0: HDMI Type A-1: no EDID data [ 40.658110] i2c-adapter i2c-2: unable to read EDID block. [ 40.658115] i915 0000:00:02.0: HDMI Type A-1: no EDID data [ 40.662777] i2c-adapter i2c-2: unable to read EDID block. [ 40.662782] i915 0000:00:02.0: HDMI Type A-1: no EDID data [ 68.832544] i2c-adapter i2c-2: unable to read EDID block. [ 68.832552] i915 0000:00:02.0: HDMI Type A-1: no EDID data [ 68.837070] i2c-adapter i2c-2: unable to read EDID block. [ 68.837074] i915 0000:00:02.0: HDMI Type A-1: no EDID data [ 69.040588] i2c-adapter i2c-2: unable to read EDID block. [ 69.040593] i915 0000:00:02.0: HDMI Type A-1: no EDID data [ 69.045181] i2c-adapter i2c-2: unable to read EDID block. [ 69.045187] i915 0000:00:02.0: HDMI Type A-1: no EDID data [ 69.200057] i2c-adapter i2c-2: unable to read EDID block. [ 69.200062] i915 0000:00:02.0: HDMI Type A-1: no EDID data [ 69.204648] i2c-adapter i2c-2: unable to read EDID block. [ 69.204654] i915 0000:00:02.0: HDMI Type A-1: no EDID data [ 72.430255] i2c-adapter i2c-2: unable to read EDID block. [ 72.430259] i915 0000:00:02.0: HDMI Type A-1: no EDID data [ 72.434817] i2c-adapter i2c-2: unable to read EDID block. [ 72.434820] i915 0000:00:02.0: HDMI Type A-1: no EDID data [ 95.750914] UDF-fs: No VRS found [ 95.750919] UDF-fs: No partition found (1) [ 95.766266] ISO 9660 Extensions: Microsoft Joliet Level 3 [ 95.822147] ISO 9660 Extensions: RRIP_1991A [ 419.549708] wlan0: authenticate with AP 00:06:25:7f:99:7f [ 419.552229] wlan0: authenticated [ 419.552232] wlan0: associate with AP 00:06:25:7f:99:7f [ 419.554359] wlan0: RX AssocResp from 00:06:25:7f:99:7f (capab=0x1 status=0 aid=4) [ 419.554363] wlan0: associated [ 419.573198] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 430.410089] wlan0: no IPv6 routers present [ 1170.790191] usb 7-1: USB disconnect, address 2 [ 1854.640148] usb 8-2: new low speed USB device using uhci_hcd and address 2 [ 1854.825415] usb 8-2: configuration #1 chosen from 1 choice [ 1854.880760] input: Microsoft Microsoft Wireless Optical Mouse® 1.00 as /devices/pci0000:00/0000:00:1d.2/usb8/8-2/8-2:1.0/input/input13 [ 1854.880897] generic-usb 0003:045E:00E1.0002: input,hidraw0: USB HID v1.11 Mouse [Microsoft Microsoft Wireless Optical Mouse® 1.00] on usb-0000:00:1d.2-2/input0 [ 3430.962623] scim-bridge[2230]: segfault at 10 ip 00007f98238d89e6 sp 00007fff49f0c548 error 4 in libscim-1.0.so.8.2.4[7f982386e000+cc000] [ 6015.554557] python[2192]: segfault at 4c4c ip 00007f129207a412 sp 00007fffaa6b6cf0 error 4 in libgobject-2.0.so.0.2200.2[7f1292051000+44000] [18353.214712] evolution[6058]: segfault at 8 ip 00007f03746c3fa0 sp 00007fffd9429b48 error 4 in libical.so.0.43.0[7f0374683000+53000] [21677.454630] i2c-adapter i2c-2: unable to read EDID block. [21677.454635] i915 0000:00:02.0: HDMI Type A-1: no EDID data [21677.459085] i2c-adapter i2c-2: unable to read EDID block. [21677.459087] i915 0000:00:02.0: HDMI Type A-1: no EDID data [21957.488135] i2c-adapter i2c-2: unable to read EDID block. [21957.488140] i915 0000:00:02.0: HDMI Type A-1: no EDID data [21957.492951] i2c-adapter i2c-2: unable to read EDID block. [21957.492956] i915 0000:00:02.0: HDMI Type A-1: no EDID data [22080.079808] i2c-adapter i2c-2: unable to read EDID block. [22080.079812] i915 0000:00:02.0: HDMI Type A-1: no EDID data [22080.084526] i2c-adapter i2c-2: unable to read EDID block. [22080.084529] i915 0000:00:02.0: HDMI Type A-1: no EDID data [25848.740681] i2c-adapter i2c-2: unable to read EDID block. [25848.740686] i915 0000:00:02.0: HDMI Type A-1: no EDID data [25848.745150] i2c-adapter i2c-2: unable to read EDID block. [25848.745154] i915 0000:00:02.0: HDMI Type A-1: no EDID data [25848.977933] i2c-adapter i2c-2: unable to read EDID block. [25848.977938] i915 0000:00:02.0: HDMI Type A-1: no EDID data [25848.982379] i2c-adapter i2c-2: unable to read EDID block. [25848.982381] i915 0000:00:02.0: HDMI Type A-1: no EDID data [25851.321066] i2c-adapter i2c-2: unable to read EDID block. [25851.321072] i915 0000:00:02.0: HDMI Type A-1: no EDID data [25851.325557] i2c-adapter i2c-2: unable to read EDID block. [25851.325559] i915 0000:00:02.0: HDMI Type A-1: no EDID data [25851.723573] i2c-adapter i2c-2: unable to read EDID block. [25851.723577] i915 0000:00:02.0: HDMI Type A-1: no EDID data [25851.731113] i2c-adapter i2c-2: unable to read EDID block. [25851.731118] i915 0000:00:02.0: HDMI Type A-1: no EDID data [25852.099002] i2c-adapter i2c-2: unable to read EDID block. [25852.099007] i915 0000:00:02.0: HDMI Type A-1: no EDID data [25852.103816] i2c-adapter i2c-2: unable to read EDID block. [25852.103821] i915 0000:00:02.0: HDMI Type A-1: no EDID data [25852.330154] i2c-adapter i2c-2: unable to read EDID block. [25852.330159] i915 0000:00:02.0: HDMI Type A-1: no EDID data [25852.334675] i2c-adapter i2c-2: unable to read EDID block. [25852.334680] i915 0000:00:02.0: HDMI Type A-1: no EDID data [25852.859874] i2c-adapter i2c-2: unable to read EDID block. [25852.859879] i915 0000:00:02.0: HDMI Type A-1: no EDID data [25852.864331] i2c-adapter i2c-2: unable to read EDID block. [25852.864334] i915 0000:00:02.0: HDMI Type A-1: no EDID data [25854.419544] i2c-adapter i2c-2: unable to read EDID block. [25854.419550] i915 0000:00:02.0: HDMI Type A-1: no EDID data [25854.424375] i2c-adapter i2c-2: unable to read EDID block. [25854.424378] i915 0000:00:02.0: HDMI Type A-1: no EDID data [31932.621231] scim-bridge[4764]: segfault at 10 ip 00007fb50162f9e6 sp 00007fffa96cc8a8 error 4 in libscim-1.0.so.8.2.4[7fb5015c5000+cc000] [32976.849428] i2c-adapter i2c-2: unable to read EDID block. [32976.849432] i915 0000:00:02.0: HDMI Type A-1: no EDID data [32976.854456] i2c-adapter i2c-2: unable to read EDID block. [32976.854460] i915 0000:00:02.0: HDMI Type A-1: no EDID data [33010.381652] i2c-adapter i2c-2: unable to read EDID block. [33010.381656] i915 0000:00:02.0: HDMI Type A-1: no EDID data [33010.386236] i2c-adapter i2c-2: unable to read EDID block. [33010.386239] i915 0000:00:02.0: HDMI Type A-1: no EDID data [37225.526721] i2c-adapter i2c-2: unable to read EDID block. [37225.526726] i915 0000:00:02.0: HDMI Type A-1: no EDID data [37225.531825] i2c-adapter i2c-2: unable to read EDID block. [37225.531831] i915 0000:00:02.0: HDMI Type A-1: no EDID data [82461.790134] usb 8-2: USB disconnect, address 2 [82478.504874] sky2 eth0: Link is down. [82575.880163] usb 8-2: new low speed USB device using uhci_hcd and address 3 [82576.064419] usb 8-2: configuration #1 chosen from 1 choice [82576.119731] input: Microsoft Microsoft Wireless Optical Mouse® 1.00 as /devices/pci0000:00/0000:00:1d.2/usb8/8-2/8-2:1.0/input/input14 [82576.119871] generic-usb 0003:045E:00E1.0003: input,hidraw0: USB HID v1.11 Mouse [Microsoft Microsoft Wireless Optical Mouse® 1.00] on usb-0000:00:1d.2-2/input0 [82810.950057] type=1503 audit(1256484576.685:22): operation="exec" pid=31570 parent=31568 profile="/usr/bin/evince" requested_mask="::x" denied_mask="::x" fsuid=1000 ouid=0 name="/bin/dash" [82810.954900] type=1503 audit(1256484576.685:23): operation="exec" pid=31572 parent=31568 profile="/usr/bin/evince" requested_mask="::x" denied_mask="::x" fsuid=1000 ouid=0 name="/bin/dash" [82892.082993] type=1503 audit(1256484657.815:24): operation="exec" pid=31598 parent=31568 profile="/usr/bin/evince" requested_mask="::x" denied_mask="::x" fsuid=1000 ouid=0 name="/bin/dash" [82892.088351] type=1503 audit(1256484657.815:25): operation="exec" pid=31599 parent=31568 profile="/usr/bin/evince" requested_mask="::x" denied_mask="::x" fsuid=1000 ouid=0 name="/bin/dash" [83059.770223] type=1503 audit(1256484825.505:26): operation="exec" pid=31655 parent=31568 profile="/usr/bin/evince" requested_mask="::x" denied_mask="::x" fsuid=1000 ouid=0 name="/bin/dash" [83059.773239] type=1503 audit(1256484825.505:27): operation="exec" pid=31657 parent=31568 profile="/usr/bin/evince" requested_mask="::x" denied_mask="::x" fsuid=1000 ouid=0 name="/bin/dash" [84760.270581] evolution[9377]: segfault at 8 ip 00007fd10435ffa0 sp 00007fffd6652938 error 4 in libical.so.0.43.0[7fd10431f000+53000] [96844.052553] usb 8-2: USB disconnect, address 3 [98173.197083] usb 8-2: new low speed USB device using uhci_hcd and address 4 [98173.419136] usb 8-2: configuration #1 chosen from 1 choice [98173.476942] input: Microsoft Microsoft Wireless Optical Mouse® 1.00 as /devices/pci0000:00/0000:00:1d.2/usb8/8-2/8-2:1.0/input/input15 [98173.477035] generic-usb 0003:045E:00E1.0004: input,hidraw0: USB HID v1.11 Mouse [Microsoft Microsoft Wireless Optical Mouse® 1.00] on usb-0000:00:1d.2-2/input0 [109498.368177] sky2 eth0: Link is up at 100 Mbps, full duplex, flow control both [109681.462034] i2c-adapter i2c-2: unable to read EDID block. [109681.462039] i915 0000:00:02.0: HDMI Type A-1: no EDID data [109681.466489] i2c-adapter i2c-2: unable to read EDID block. [109681.466492] i915 0000:00:02.0: HDMI Type A-1: no EDID data [109859.350273] i2c-adapter i2c-2: unable to read EDID block. [109859.350278] i915 0000:00:02.0: HDMI Type A-1: no EDID data [109859.354924] i2c-adapter i2c-2: unable to read EDID block. [109859.354928] i915 0000:00:02.0: HDMI Type A-1: no EDID data [109922.221167] i2c-adapter i2c-2: unable to read EDID block. [109922.221171] i915 0000:00:02.0: HDMI Type A-1: no EDID data [109922.225930] i2c-adapter i2c-2: unable to read EDID block. [109922.225933] i915 0000:00:02.0: HDMI Type A-1: no EDID data [110093.523381] i2c-adapter i2c-2: unable to read EDID block. [110093.523385] i915 0000:00:02.0: HDMI Type A-1: no EDID data [110093.527819] i2c-adapter i2c-2: unable to read EDID block. [110093.527821] i915 0000:00:02.0: HDMI Type A-1: no EDID data [110110.719737] i2c-adapter i2c-2: unable to read EDID block. [110110.719742] i915 0000:00:02.0: HDMI Type A-1: no EDID data [110110.724382] i2c-adapter i2c-2: unable to read EDID block. [110110.724387] i915 0000:00:02.0: HDMI Type A-1: no EDID data [117359.290195] usb 8-2: USB disconnect, address 4 [118557.344669] sky2 eth0: Link is down. [118643.510541] usb 8-2: new low speed USB device using uhci_hcd and address 5 [118643.695354] usb 8-2: configuration #1 chosen from 1 choice [118643.750908] input: Microsoft Microsoft Wireless Optical Mouse® 1.00 as /devices/pci0000:00/0000:00:1d.2/usb8/8-2/8-2:1.0/input/input16 [118643.751047] generic-usb 0003:045E:00E1.0005: input,hidraw0: USB HID v1.11 Mouse [Microsoft Microsoft Wireless Optical Mouse® 1.00] on usb-0000:00:1d.2-2/input0 [125307.040207] usb 8-2: USB disconnect, address 5 [152923.870047] usb 8-2: new low speed USB device using uhci_hcd and address 6 [152924.110685] usb 8-2: configuration #1 chosen from 1 choice [152924.167288] input: Microsoft Microsoft Wireless Optical Mouse® 1.00 as /devices/pci0000:00/0000:00:1d.2/usb8/8-2/8-2:1.0/input/input17 [152924.167382] generic-usb 0003:045E:00E1.0006: input,hidraw0: USB HID v1.11 Mouse [Microsoft Microsoft Wireless Optical Mouse® 1.00] on usb-0000:00:1d.2-2/input0 [153269.421203] wlan0: disassociating by local choice (reason=3) [153269.570157] wlan0: deauthenticating by local choice (reason=3) [153269.720075] sky2 eth0: disabling interface [153271.051648] PM: Syncing filesystems ... done. [153271.362607] PM: Preparing system for mem sleep [153271.362611] Freezing user space processes ... (elapsed 0.08 seconds) done. [153271.450850] Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done. [153271.450907] PM: Entering mem sleep [153271.450921] Suspending console(s) (use no_console_suspend to debug) [153271.522643] sd 0:0:0:0: [sda] Synchronizing SCSI cache [153271.522829] sd 0:0:0:0: [sda] Stopping disk [153272.921949] ACPI handle has no context! [153272.922035] ACPI handle has no context! [153272.922042] sdhci-pci 0000:07:09.2: PME# disabled [153272.922049] sdhci-pci 0000:07:09.2: PCI INT A disabled [153272.922056] ACPI handle has no context! [153272.940668] sky2 0000:06:00.0: PME# disabled [153273.080104] ehci_hcd 0000:00:1d.7: PCI INT A disabled [153273.080114] uhci_hcd 0000:00:1d.2: PCI INT C disabled [153273.080124] uhci_hcd 0000:00:1d.1: PCI INT B disabled [153273.080133] uhci_hcd 0000:00:1d.0: PCI INT A disabled [153273.190438] HDA Intel 0000:00:1b.0: PCI INT A disabled [153273.210174] HDA Intel 0000:00:1b.0: power state changed by ACPI to D3 [153273.210187] ehci_hcd 0000:00:1a.7: PCI INT C disabled [153273.210196] uhci_hcd 0000:00:1a.2: PCI INT C disabled [153273.210206] uhci_hcd 0000:00:1a.1: PCI INT B disabled [153273.210215] uhci_hcd 0000:00:1a.0: PCI INT A disabled [153273.238054] render error detected, EIR: 0x00000010 [153273.238058] IPEIR: 0x00000000 [153273.238059] IPEHR: 0x01000000 [153273.238061] INSTDONE: 0xfffffffe [153273.238062] INSTPS: 0x0001e000 [153273.238064] INSTDONE1: 0xffffffff [153273.238065] ACTHD: 0xe4c16918 [153273.238067] page table error [153273.238068] PGTBL_ER: 0x00100000 [153273.238071] [drm:i915_handle_error] *ERROR* EIR stuck: 0x00000010, masking [153273.250182] PM: suspend devices took 1.800 seconds [153273.250463] ehci_hcd 0000:00:1d.7: PME# disabled [153273.270321] ehci_hcd 0000:00:1a.7: PME# disabled [153273.290454] ACPI: Preparing to enter system sleep state S3 [153273.850160] Disabling non-boot CPUs ... [153273.960017] CPU 1 is now offline [153273.960020] SMP alternatives: switching to UP code [153273.966842] CPU0 attaching NULL sched-domain. [153273.966845] CPU1 attaching NULL sched-domain. [153273.966854] CPU0 attaching NULL sched-domain. [153273.967053] CPU1 is down [153273.967099] Extended CMOS year: 2000 [153273.967099] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [153273.967099] Back to C! [153273.967099] CPU0: Thermal LVT vector (0xfa) already installed [153273.967099] Extended CMOS year: 2000 [153273.967099] Enabling non-boot CPUs ... [153273.967099] SMP alternatives: switching to SMP code [153273.973705] Booting processor 1 APIC 0x1 ip 0x6000 [153273.966679] Initializing CPU#1 [153273.966679] Calibrating delay using timer specific routine.. 3990.36 BogoMIPS (lpj=19951824) [153273.966679] CPU: L1 I cache: 32K, L1 D cache: 32K [153273.966679] CPU: L2 cache: 2048K [153273.966679] CPU 1/0x1 -> Node 0 [153273.966679] CPU: Physical Processor ID: 0 [153273.966679] CPU: Processor Core ID: 1 [153273.966679] mce: CPU supports 6 MCE banks [153273.966679] CPU1: Thermal monitoring enabled (TM2) [153273.966679] x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106 [153274.132309] CPU1: Intel(R) Core(TM)2 Duo CPU T6400 @ 2.00GHz stepping 0a [153274.132380] CPU0 attaching NULL sched-domain. [153274.132515] Switched to high resolution mode on CPU 1 [153274.170022] CPU0 attaching sched-domain: [153274.170024] domain 0: span 0-1 level MC [153274.170027] groups: 0 1 [153274.170031] CPU1 attaching sched-domain: [153274.170032] domain 0: span 0-1 level MC [153274.170034] groups: 1 0 [153274.172517] CPU1 is up [153274.172519] ACPI: Waking up from system sleep state S3 [153274.810260] i915 0000:00:02.0: restoring config space at offset 0xf (was 0x100, writing 0x105) [153274.810271] i915 0000:00:02.0: restoring config space at offset 0x1 (was 0x900007, writing 0x900407) [153274.810297] pci 0000:00:02.1: restoring config space at offset 0x1 (was 0x900000, writing 0x900007) [153274.810332] uhci_hcd 0000:00:1a.0: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001) [153274.810373] uhci_hcd 0000:00:1a.1: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001) [153274.810393] uhci_hcd 0000:00:1a.2: restoring config space at offset 0xf (was 0x300, writing 0x30a) [153274.810406] uhci_hcd 0000:00:1a.2: restoring config space at offset 0x8 (was 0x1, writing 0x1861) [153274.810420] uhci_hcd 0000:00:1a.2: restoring config space at offset 0x1 (was 0x2900000, writing 0x2900001) [153274.810468] ehci_hcd 0000:00:1a.7: restoring config space at offset 0x1 (was 0x2900106, writing 0x2900102) [153274.810489] ehci_hcd 0000:00:1a.7: PME# disabled [153274.810508] HDA Intel 0000:00:1b.0: restoring config space at offset 0xf (was 0x100, writing 0x10b) [153274.810530] HDA Intel 0000:00:1b.0: restoring config space at offset 0x3 (was 0x0, writing 0x10) [153274.810536] HDA Intel 0000:00:1b.0: restoring config space at offset 0x1 (was 0x100006, writing 0x100102) [153274.810574] pcieport-driver 0000:00:1c.0: restoring config space at offset 0xf (was 0x40100, writing 0x4010a) [153274.810587] pcieport-driver 0000:00:1c.0: restoring config space at offset 0x9 (was 0x10001, writing 0xf0c1f0c1) [153274.810592] pcieport-driver 0000:00:1c.0: restoring config space at offset 0x8 (was 0x0, writing 0xf050f050) [153274.810597] pcieport-driver 0000:00:1c.0: restoring config space at offset 0x7 (was 0x20000000, writing 0x2020) [153274.810603] pcieport-driver 0000:00:1c.0: restoring config space at offset 0x6 (was 0x0, writing 0x30200) [153274.810611] pcieport-driver 0000:00:1c.0: restoring config space at offset 0x3 (was 0x810000, writing 0x810010) [153274.810618] pcieport-driver 0000:00:1c.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100507) [153274.810666] pcieport-driver 0000:00:1c.2: restoring config space at offset 0xf (was 0x40300, writing 0x4030a) [153274.810678] pcieport-driver 0000:00:1c.2: restoring config space at offset 0x9 (was 0x10001, writing 0xf0d1f0d1) [153274.810685] pcieport-driver 0000:00:1c.2: restoring config space at offset 0x7 (was 0x20000000, writing 0x3030) [153274.810695] pcieport-driver 0000:00:1c.2: restoring config space at offset 0x3 (was 0x810000, writing 0x810010) [153274.810702] pcieport-driver 0000:00:1c.2: restoring config space at offset 0x1 (was 0x100000, writing 0x100507) [153274.810750] pcieport-driver 0000:00:1c.5: restoring config space at offset 0xf (was 0x40200, writing 0x40205) [153274.810762] pcieport-driver 0000:00:1c.5: restoring config space at offset 0x9 (was 0x10001, writing 0xb801b801) [153274.810769] pcieport-driver 0000:00:1c.5: restoring config space at offset 0x7 (was 0x20000000, writing 0x4040) [153274.810779] pcieport-driver 0000:00:1c.5: restoring config space at offset 0x3 (was 0x810000, writing 0x810010) [153274.810786] pcieport-driver 0000:00:1c.5: restoring config space at offset 0x1 (was 0x100000, writing 0x100507) [153274.810848] uhci_hcd 0000:00:1d.0: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001) [153274.810887] uhci_hcd 0000:00:1d.1: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001) [153274.810927] uhci_hcd 0000:00:1d.2: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001) [153274.810975] ehci_hcd 0000:00:1d.7: restoring config space at offset 0x1 (was 0x2900106, writing 0x2900102) [153274.810995] ehci_hcd 0000:00:1d.7: PME# disabled [153274.811005] pci 0000:00:1e.0: restoring config space at offset 0xf (was 0x40000, writing 0x400ff) [153274.811017] pci 0000:00:1e.0: restoring config space at offset 0x9 (was 0x10001, writing 0x1fff1) [153274.811023] pci 0000:00:1e.0: restoring config space at offset 0x8 (was 0x0, writing 0xf080f080) [153274.811028] pci 0000:00:1e.0: restoring config space at offset 0x7 (was 0x22800000, writing 0x228000f0) [153274.811040] pci 0000:00:1e.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100107) [153274.811117] ahci 0000:00:1f.2: restoring config space at offset 0xf (was 0x200, writing 0x20a) [153274.811141] ahci 0000:00:1f.2: restoring config space at offset 0x1 (was 0x2b00007, writing 0x2b00407) [153274.811194] pci 0000:00:1f.3: restoring config space at offset 0x4 (was 0x4, writing 0xb8100004) [153274.811240] iwlagn 0000:02:00.0: restoring config space at offset 0xf (was 0x100, writing 0x105) [153274.811276] iwlagn 0000:02:00.0: restoring config space at offset 0x4 (was 0x4, writing 0xf0500004) [153274.811284] iwlagn 0000:02:00.0: restoring config space at offset 0x3 (was 0x0, writing 0x10) [153274.811294] iwlagn 0000:02:00.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100106) [153274.811575] sky2 0000:06:00.0: restoring config space at offset 0xf (was 0x100, writing 0x10a) [153274.811706] sky2 0000:06:00.0: restoring config space at offset 0x6 (was 0x1, writing 0x4001) [153274.811757] sky2 0000:06:00.0: restoring config space at offset 0x3 (was 0x0, writing 0x10) [153274.811807] sky2 0000:06:00.0: restoring config space at offset 0x1 (was 0x100007, writing 0x100507) [153274.812077] pci 0000:07:09.0: restoring config space at offset 0xf (was 0x1ff, writing 0x105) [153274.812101] pci 0000:07:09.0: restoring config space at offset 0x4 (was 0x0, writing 0xf0800000) [153274.812107] pci 0000:07:09.0: restoring config space at offset 0x3 (was 0x800000, writing 0x802010) [153274.812115] pci 0000:07:09.0: restoring config space at offset 0x1 (was 0x4100002, writing 0x4100102) [153274.812140] sdhci-pci 0000:07:09.2: restoring config space at offset 0xf (was 0x1ff, writing 0x105) [153274.812165] sdhci-pci 0000:07:09.2: restoring config space at offset 0x4 (was 0x0, writing 0xf0801000) [153274.812170] sdhci-pci 0000:07:09.2: restoring config space at offset 0x3 (was 0x0, writing 0x2010) [153274.812178] sdhci-pci 0000:07:09.2: restoring config space at offset 0x1 (was 0x4100000, writing 0x4100106) [153280.348931] i915 0000:00:02.0: setting latency timer to 64 [153280.411054] [drm] LVDS-8: set mode 1366x768 14 [153280.431271] pci 0000:00:02.1: PME# disabled [153280.431283] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [153280.431294] uhci_hcd 0000:00:1a.0: setting latency timer to 64 [153280.431317] usb usb3: root hub lost power or was reset [153280.431337] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 [153280.431343] uhci_hcd 0000:00:1a.1: setting latency timer to 64 [153280.431375] usb usb4: root hub lost power or was reset [153280.431402] uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 19 (level, low) -> IRQ 19 [153280.431412] uhci_hcd 0000:00:1a.2: setting latency timer to 64 [153280.431450] usb usb5: root hub lost power or was reset [153280.431472] ehci_hcd 0000:00:1a.7: PME# disabled [153280.431477] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 19 (level, low) -> IRQ 19 [153280.431490] ehci_hcd 0000:00:1a.7: setting latency timer to 64 [153280.431507] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 [153280.431516] HDA Intel 0000:00:1b.0: setting latency timer to 64 [153280.431565] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [153280.431577] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [153280.431603] usb usb6: root hub lost power or was reset [153280.431622] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [153280.431628] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [153280.431662] usb usb7: root hub lost power or was reset [153280.431686] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [153280.431699] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [153280.431732] usb usb8: root hub lost power or was reset [153280.431759] ehci_hcd 0000:00:1d.7: PME# disabled [153280.431763] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [153280.431769] ehci_hcd 0000:00:1d.7: setting latency timer to 64 [153280.431781] pci 0000:00:1e.0: setting latency timer to 64 [153280.431792] ahci 0000:00:1f.2: setting latency timer to 64 [153280.431895] sky2 0000:06:00.0: PME# disabled [153280.432235] pci 0000:07:09.0: PME# disabled [153280.432242] sdhci-pci 0000:07:09.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [153280.770120] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [153280.792623] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [153280.801811] ata2.00: configured for UDMA/133 [153280.804588] ata1.00: configured for UDMA/133 [153280.810059] ata5: SATA link down (SStatus 0 SControl 300) [153280.820053] ata1: exception Emask 0x10 SAct 0x0 SErr 0x0 action 0x9 t4 [153280.820056] ata1: irq_stat 0x00400040, connection status changed [153280.827724] ata1.00: configured for UDMA/133 [153280.827728] ata1: EH complete [153280.830055] ata6: SATA link down (SStatus 0 SControl 300) [153280.930029] ata2: exception Emask 0x10 SAct 0x0 SErr 0x0 action 0x9 t4 [153280.930031] ata2: irq_stat 0x40000001 [153280.938857] ata2.00: configured for UDMA/133 [153280.938861] ata2: EH complete [153281.130130] usb 1-3: reset high speed USB device using ehci_hcd and address 2 [153281.330805] sd 0:0:0:0: [sda] Starting disk [153281.364681] PM: resume devices took 6.550 seconds [153281.364683] ------------[ cut here ]------------ [153281.364689] WARNING: at /build/buildd/linux-2.6.31/kernel/power/suspend_test.c:52 suspend_test_finish+0x7c/0x80() [153281.364691] Hardware name: MD7818U [153281.364693] Component: resume devices [153281.364694] Modules linked in: isofs udf crc_itu_t binfmt_misc ppdev snd_hda_codec_intelhdmi snd_hda_codec_conexant snd_hda_intel snd_hda_codec snd_hwdep snd_pcm_oss snd_mixer_oss snd_pcm arc4 snd_seq_dummy snd_seq_oss snd_seq_midi joydev ecb snd_rawmidi snd_seq_midi_event snd_seq iwlagn iwlcore uvcvideo snd_timer snd_seq_device iptable_filter videodev mac80211 sdhci_pci ip_tables v4l1_compat sdhci lp psmouse snd soundcore led_class serio_raw v4l2_compat_ioctl32 snd_page_alloc x_tables parport cfg80211 fbcon tileblit font bitblit softcursor i915 drm i2c_algo_bit usbhid sky2 intel_agp video output [153281.364735] Pid: 21411, comm: pm-suspend Not tainted 2.6.31-14-generic #48-Ubuntu [153281.364737] Call Trace: [153281.364743] [] warn_slowpath_common+0x78/0xb0 [153281.364746] [] warn_slowpath_fmt+0x3c/0x40 [153281.364749] [] suspend_test_finish+0x7c/0x80 [153281.364753] [] suspend_devices_and_enter+0xa9/0xe0 [153281.364756] [] enter_state+0xd8/0x110 [153281.364758] [] state_store+0x92/0x100 [153281.364764] [] kobj_attr_store+0x17/0x20 [153281.364768] [] sysfs_write_file+0xe0/0x160 [153281.364772] [] vfs_write+0xb8/0x1a0 [153281.364776] [] ? do_page_fault+0x194/0x370 [153281.364779] [] sys_write+0x4c/0x80 [153281.364783] [] system_call_fastpath+0x16/0x1b [153281.364786] ---[ end trace e850a863972179cc ]--- [153281.364822] PM: Finishing wakeup. [153281.364823] Restarting tasks ... [153281.365783] usb 8-2: USB disconnect, address 6 [153281.404666] done. [153281.664497] Registered led device: iwl-phy0::radio [153281.664518] Registered led device: iwl-phy0::assoc [153281.664535] Registered led device: iwl-phy0::RX [153281.664554] Registered led device: iwl-phy0::TX [153281.710882] ADDRCONF(NETDEV_UP): wlan0: link is not ready [153281.715378] sky2 eth0: enabling interface [153281.717231] ADDRCONF(NETDEV_UP): eth0: link is not ready [153357.400509] wlan0: authenticate with AP 00:14:bf:b7:b1:ae [153357.402353] wlan0: authenticated [153357.402359] wlan0: associate with AP 00:14:bf:b7:b1:ae [153357.404542] wlan0: RX AssocResp from 00:14:bf:b7:b1:ae (capab=0x401 status=0 aid=1) [153357.404547] wlan0: associated [153357.406448] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [153368.080024] wlan0: no IPv6 routers present