[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.27-11-generic (buildd@yellow) (gcc version 4.3.2 (Ubuntu 4.3.2-1ubuntu11) ) #1 SMP Wed Apr 1 20:53:41 UTC 2009 (Ubuntu 2.6.27-11.31-generic) [ 0.000000] Command line: root=UUID=38D89B9FD89B59C8 loop=/ubuntu/disks/root.disk ro ROOTFLAGS=syncio quiet splash vga=792 [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Centaur CentaurHauls [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f400 (usable) [ 0.000000] BIOS-e820: 000000000009f400 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 0000000077ef0000 (usable) [ 0.000000] BIOS-e820: 0000000077ef0000 - 0000000077ef3000 (ACPI NVS) [ 0.000000] BIOS-e820: 0000000077ef3000 - 0000000077f00000 (ACPI data) [ 0.000000] BIOS-e820: 0000000078000000 - 0000000080000000 (reserved) [ 0.000000] BIOS-e820: 00000000f0000000 - 00000000f4000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved) [ 0.000000] DMI 2.5 present. [ 0.000000] Phoenix BIOS detected: BIOS may corrupt low RAM, working it around. [ 0.000000] last_pfn = 0x77ef0 max_arch_pfn = 0x3ffffffff [ 0.000000] init_memory_mapping [ 0.000000] 0000000000 - 0077e00000 page 2M [ 0.000000] 0077e00000 - 0077ef0000 page 4k [ 0.000000] kernel direct mapping tables up to 77ef0000 @ 10000-14000 [ 0.000000] last_map_addr: 77ef0000 end: 77ef0000 [ 0.000000] RAMDISK: 77657000 - 77edf3f3 [ 0.000000] ACPI: RSDP 000F80B0, 0014 (r0 Nvidia) [ 0.000000] ACPI: RSDT 77EF3000, 0038 (r1 Nvidia NVDAACPI 42302E31 NVDA 0) [ 0.000000] ACPI: FACP 77EF3080, 0074 (r1 Nvidia NVDAACPI 42302E31 NVDA 0) [ 0.000000] ACPI Warning (tbfadt-0442): Optional field "Pm2ControlBlock" has zero address or length: 0000000000000000/1 [20080609] [ 0.000000] ACPI: DSDT 77EF3100, 5B56 (r1 NVIDIA NVDAACPI 1000 MSFT 3000000) [ 0.000000] ACPI: FACS 77EF0000, 0040 [ 0.000000] ACPI: SSDT 77EF8D40, 02CC (r1 PTLTD POWERNOW 1 LTP 1) [ 0.000000] ACPI: HPET 77EF9040, 0038 (r1 Nvidia NVDAACPI 42302E31 NVDA 98) [ 0.000000] ACPI: MCFG 77EF9080, 003C (r1 Nvidia NVDAACPI 42302E31 NVDA 0) [ 0.000000] ACPI: APIC 77EF8C80, 0098 (r1 Nvidia NVDAACPI 42302E31 NVDA 0) [ 0.000000] Scanning NUMA topology in Northbridge 24 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at 0000000000000000-0000000077ef0000 [ 0.000000] Bootmem setup node 0 0000000000000000-0000000077ef0000 [ 0.000000] NODE_DATA [0000000000012000 - 0000000000016fff] [ 0.000000] bootmap [0000000000017000 - 0000000000025fdf] pages f [ 0.000000] (6 early reservations) ==> bootmem [0000000000 - 0077ef0000] [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] [ 0.000000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000] [ 0.000000] #2 [0000200000 - 00008b9f5c] TEXT DATA BSS ==> [0000200000 - 00008b9f5c] [ 0.000000] #3 [0077657000 - 0077edf3f3] RAMDISK ==> [0077657000 - 0077edf3f3] [ 0.000000] #4 [000009f000 - 0000100000] BIOS reserved ==> [000009f000 - 0000100000] [ 0.000000] #5 [0000010000 - 0000012000] PGTABLE ==> [0000010000 - 0000012000] [ 0.000000] found SMP MP-table at [ffff8800000f3ca0] 000f3ca0 [ 0.000000] [ffffe20000000000-ffffe20001dfffff] PMD -> [ffff880001200000-ffff880002ffffff] on node 0 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000010 -> 0x00001000 [ 0.000000] DMA32 0x00001000 -> 0x00100000 [ 0.000000] Normal 0x00100000 -> 0x00100000 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[2] active PFN ranges [ 0.000000] 0: 0x00000010 -> 0x0000009f [ 0.000000] 0: 0x00000100 -> 0x00077ef0 [ 0.000000] On node 0 totalpages: 491135 [ 0.000000] DMA zone: 2094 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 479540 pages, LIFO batch:31 [ 0.000000] Detected use of extended apic ids on hypertransport bus [ 0.000000] ACPI: PM-Timer IO Port: 0x1008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 4, version 0, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] ACPI: IRQ14 used by override. [ 0.000000] ACPI: IRQ15 used by override. [ 0.000000] Setting APIC routing to flat [ 0.000000] ACPI: HPET id: 0x10de8201 base: 0xfeff0000 [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] SMP: Allowing 4 CPUs, 2 hotplug CPUs [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000 [ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000 [ 0.000000] Allocating PCI resources starting at 88000000 (gap: 80000000:70000000) [ 0.000000] PERCPU: Allocating 64928 bytes of per cpu data [ 0.000000] NR_CPUS: 64, nr_cpu_ids: 4, nr_node_ids 1 [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 481634 [ 0.000000] Policy zone: DMA32 [ 0.000000] Kernel command line: root=UUID=38D89B9FD89B59C8 loop=/ubuntu/disks/root.disk ro ROOTFLAGS=syncio quiet splash vga=792 [ 0.000000] Initializing CPU#0 [ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes) [ 0.000000] TSC: PIT calibration confirmed by PMTIMER. [ 0.000000] TSC: using PIT calibration value [ 0.000000] Detected 2712.423 MHz processor. [ 0.004000] spurious 8259A interrupt: IRQ7. [ 0.004000] Console: colour dummy device 80x25 [ 0.004000] console [tty0] enabled [ 0.004000] Checking aperture... [ 0.004000] No AGP bridge found [ 0.004000] Node 0: aperture @ fc7e000000 size 32 MB [ 0.004000] Aperture beyond 4GB. Ignoring. [ 0.004000] Memory: 1917776k/1964992k available (3115k kernel code, 46764k reserved, 1573k data, 540k init) [ 0.004000] CPA: page pool initialized 1 of 1 pages preallocated [ 0.004000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.004000] hpet clockevent registered [ 0.004000] Calibrating delay loop (skipped), value calculated using timer frequency.. 5424.84 BogoMIPS (lpj=10849692) [ 0.004000] Security Framework initialized [ 0.004000] SELinux: Disabled at boot. [ 0.004000] AppArmor: AppArmor initialized [ 0.004000] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.004000] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.004000] Mount-cache hash table entries: 256 [ 0.004000] Initializing cgroup subsys ns [ 0.004000] Initializing cgroup subsys cpuacct [ 0.004000] Initializing cgroup subsys memory [ 0.004000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 0.004000] CPU: L2 Cache: 512K (64 bytes/line) [ 0.004000] CPU 0/0 -> Node 0 [ 0.004000] tseg: 0077f00000 [ 0.004000] CPU: Physical Processor ID: 0 [ 0.004000] CPU: Processor Core ID: 0 [ 0.004000] using C1E aware idle routine [ 0.004000] ACPI: Core revision 20080609 [ 0.004941] ACPI: Checking initramfs for custom DSDT [ 0.268581] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.308339] CPU0: AMD Athlon(tm) 64 X2 Dual Core Processor 5200+ stepping 02 [ 0.308342] Using local APIC timer interrupts. [ 0.312020] APIC timer calibration result 12557555 [ 0.312021] Detected 12.557 MHz APIC timer. [ 0.312167] Booting processor 1/1 ip 6000 [ 0.004000] Initializing CPU#1 [ 0.004000] Calibrating delay using timer specific routine.. 5425.00 BogoMIPS (lpj=10850009) [ 0.004000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 0.004000] CPU: L2 Cache: 512K (64 bytes/line) [ 0.004000] CPU 1/1 -> Node 0 [ 0.004000] CPU: Physical Processor ID: 0 [ 0.004000] CPU: Processor Core ID: 1 [ 0.400216] CPU1: AMD Athlon(tm) 64 X2 Dual Core Processor 5200+ stepping 02 [ 0.400228] Brought up 2 CPUs [ 0.400230] Total of 2 processors activated (10849.85 BogoMIPS). [ 0.400302] CPU0 attaching sched-domain: [ 0.400304] domain 0: span 0-1 level CPU [ 0.400306] groups: 0 1 [ 0.400309] domain 1: span 0-1 level NODE [ 0.400310] groups: 0-1 [ 0.400314] CPU1 attaching sched-domain: [ 0.400316] domain 0: span 0-1 level CPU [ 0.400317] groups: 1 0 [ 0.400319] domain 1: span 0-1 level NODE [ 0.400321] groups: 0-1 [ 0.400393] net_namespace: 1552 bytes [ 0.400393] Booting paravirtualized kernel on bare hardware [ 0.400393] Time: 5:48:03 Date: 10/23/09 [ 0.400393] NET: Registered protocol family 16 [ 0.400393] node 0 link 0: io port [8000, ffff] [ 0.400393] TOM: 0000000080000000 aka 2048M [ 0.400393] node 0 link 0: mmio [a0000, bffff] [ 0.400393] node 0 link 0: mmio [80000000, efffffff] [ 0.400393] node 0 link 0: mmio [f4000000, fe02ffff] [ 0.400393] node 0 link 0: mmio [f0000000, f03fffff] [ 0.400393] bus: [00,04] on node 0 link 0 [ 0.400393] bus: 00 index 0 io port: [0, ffff] [ 0.400393] bus: 00 index 1 mmio: [a0000, bffff] [ 0.400393] bus: 00 index 2 mmio: [80000000, f3ffffff] [ 0.400393] bus: 00 index 3 mmio: [f4000000, fcffffffff] [ 0.400393] ACPI: bus type pci registered [ 0.400393] PCI: MCFG configuration 0: base f0000000 segment 0 buses 0 - 63 [ 0.400393] PCI: MCFG area at f0000000 reserved in E820 [ 0.402547] PCI: Using MMCONFIG at f0000000 - f3ffffff [ 0.402549] PCI: Using configuration type 1 for base access [ 0.404759] ACPI: EC: Look up EC in DSDT [ 0.413451] ACPI: Interpreter enabled [ 0.413455] ACPI: (supports S0 S1 S4 S5) [ 0.413471] ACPI: Using IOAPIC for interrupt routing [ 0.420224] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 0.420224] PCI: 0000:00:01.0 reg 18 io port: [1d00, 1dff] [ 0.420224] PCI: 0000:00:01.1 reg 10 io port: [fc00, fc3f] [ 0.420224] PCI: 0000:00:01.1 reg 20 io port: [1c00, 1c3f] [ 0.420224] PCI: 0000:00:01.1 reg 24 io port: [f400, f43f] [ 0.420224] pci 0000:00:01.1: PME# supported from D3hot D3cold [ 0.420227] pci 0000:00:01.1: PME# disabled [ 0.420263] PCI: 0000:00:02.0 reg 10 32bit mmio: [fe02f000, fe02ffff] [ 0.420280] pci 0000:00:02.0: supports D1 [ 0.420282] pci 0000:00:02.0: supports D2 [ 0.420283] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.420285] pci 0000:00:02.0: PME# disabled [ 0.420302] PCI: 0000:00:02.1 reg 10 32bit mmio: [fe02e000, fe02e0ff] [ 0.420322] pci 0000:00:02.1: supports D1 [ 0.420323] pci 0000:00:02.1: supports D2 [ 0.420325] pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold [ 0.420327] pci 0000:00:02.1: PME# disabled [ 0.420371] PCI: 0000:00:05.0 reg 10 32bit mmio: [fe024000, fe027fff] [ 0.424039] pci 0000:00:05.0: PME# supported from D3hot D3cold [ 0.424041] pci 0000:00:05.0: PME# disabled [ 0.424066] PCI: 0000:00:06.0 reg 20 io port: [f000, f00f] [ 0.424092] PCI: 0000:00:07.0 reg 10 32bit mmio: [fe02d000, fe02dfff] [ 0.424095] PCI: 0000:00:07.0 reg 14 io port: [ec00, ec07] [ 0.424110] pci 0000:00:07.0: supports D1 [ 0.424111] pci 0000:00:07.0: supports D2 [ 0.424113] pci 0000:00:07.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.424116] pci 0000:00:07.0: PME# disabled [ 0.424129] PCI: 0000:00:08.0 reg 10 io port: [9f0, 9f7] [ 0.424132] PCI: 0000:00:08.0 reg 14 io port: [bf0, bf3] [ 0.424135] PCI: 0000:00:08.0 reg 18 io port: [970, 977] [ 0.424138] PCI: 0000:00:08.0 reg 1c io port: [b70, b73] [ 0.424140] PCI: 0000:00:08.0 reg 20 io port: [d800, d80f] [ 0.424143] PCI: 0000:00:08.0 reg 24 32bit mmio: [fe02c000, fe02cfff] [ 0.424167] PCI: 0000:00:08.1 reg 10 io port: [9e0, 9e7] [ 0.424169] PCI: 0000:00:08.1 reg 14 io port: [be0, be3] [ 0.424172] PCI: 0000:00:08.1 reg 18 io port: [960, 967] [ 0.424175] PCI: 0000:00:08.1 reg 1c io port: [b60, b63] [ 0.424177] PCI: 0000:00:08.1 reg 20 io port: [c400, c40f] [ 0.424180] PCI: 0000:00:08.1 reg 24 32bit mmio: [fe02b000, fe02bfff] [ 0.424211] pci 0000:00:09.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.424213] pci 0000:00:09.0: PME# disabled [ 0.424232] pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.424234] pci 0000:00:0b.0: PME# disabled [ 0.424252] pci 0000:00:0c.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.424254] pci 0000:00:0c.0: PME# disabled [ 0.424264] PCI: 0000:00:0d.0 reg 10 32bit mmio: [fb000000, fbffffff] [ 0.424268] PCI: 0000:00:0d.0 reg 14 64bit mmio: [e0000000, efffffff] [ 0.424271] PCI: 0000:00:0d.0 reg 1c 64bit mmio: [fc000000, fcffffff] [ 0.424275] PCI: 0000:00:0d.0 reg 30 32bit mmio: [0, 1ffff] [ 0.424364] pci 0000:00:04.0: transparent bridge [ 0.424367] PCI: bridge 0000:00:04.0 io port: [b000, bfff] [ 0.424369] PCI: bridge 0000:00:04.0 32bit mmio: [fd800000, fd8fffff] [ 0.424372] PCI: bridge 0000:00:04.0 32bit mmio pref: [fdf00000, fdffffff] [ 0.424403] PCI: bridge 0000:00:09.0 io port: [a000, afff] [ 0.424405] PCI: bridge 0000:00:09.0 32bit mmio: [fde00000, fdefffff] [ 0.424407] PCI: bridge 0000:00:09.0 64bit mmio pref: [fdd00000, fddfffff] [ 0.424437] PCI: bridge 0000:00:0b.0 io port: [9000, 9fff] [ 0.424439] PCI: bridge 0000:00:0b.0 32bit mmio: [fdc00000, fdcfffff] [ 0.424442] PCI: bridge 0000:00:0b.0 64bit mmio pref: [fdb00000, fdbfffff] [ 0.424472] PCI: bridge 0000:00:0c.0 io port: [8000, 8fff] [ 0.424474] PCI: bridge 0000:00:0c.0 32bit mmio: [fda00000, fdafffff] [ 0.424476] PCI: bridge 0000:00:0c.0 64bit mmio pref: [fd900000, fd9fffff] [ 0.424490] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.424857] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT] [ 0.468326] ACPI: PCI Interrupt Link [LNK1] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.468348] ACPI: PCI Interrupt Link [LNK2] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.468512] ACPI: PCI Interrupt Link [LNK3] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.468675] ACPI: PCI Interrupt Link [LNK4] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.468838] ACPI: PCI Interrupt Link [LNK5] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.469001] ACPI: PCI Interrupt Link [LNK6] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.469165] ACPI: PCI Interrupt Link [LNK7] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.469328] ACPI: PCI Interrupt Link [LNK8] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.469494] ACPI: PCI Interrupt Link [LIGP] (IRQs *5 7 9 10 11 14 15) [ 0.469656] ACPI: PCI Interrupt Link [LP2P] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.469821] ACPI: PCI Interrupt Link [LUBA] (IRQs 5 7 9 10 *11 14 15) [ 0.469986] ACPI: PCI Interrupt Link [LMAC] (IRQs 5 7 9 10 11 14 *15) [ 0.470150] ACPI: PCI Interrupt Link [LAZA] (IRQs 5 7 9 10 *11 14 15) [ 0.470313] ACPI: PCI Interrupt Link [LPMU] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.470478] ACPI: PCI Interrupt Link [LSMB] (IRQs 5 7 9 *10 11 14 15) [ 0.470643] ACPI: PCI Interrupt Link [LUB2] (IRQs *5 7 9 10 11 14 15) [ 0.470805] ACPI: PCI Interrupt Link [LIDE] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.470971] ACPI: PCI Interrupt Link [LSID] (IRQs 5 7 9 10 *11 14 15) [ 0.471135] ACPI: PCI Interrupt Link [LFID] (IRQs 5 7 9 *10 11 14 15) [ 0.471354] ACPI: PCI Interrupt Link [APC1] (IRQs 16) *0, disabled. [ 0.472087] ACPI: PCI Interrupt Link [APC2] (IRQs 17) *0, disabled. [ 0.472299] ACPI: PCI Interrupt Link [APC3] (IRQs 18) *0, disabled. [ 0.472514] ACPI: PCI Interrupt Link [APC4] (IRQs 19) *0, disabled. [ 0.472725] ACPI: PCI Interrupt Link [APC5] (IRQs 16) *0, disabled. [ 0.472936] ACPI: PCI Interrupt Link [APC6] (IRQs 16) *0, disabled. [ 0.473147] ACPI: PCI Interrupt Link [APC7] (IRQs 16) *0, disabled. [ 0.473357] ACPI: PCI Interrupt Link [APC8] (IRQs 16) *0, disabled. [ 0.473568] ACPI: PCI Interrupt Link [AIGP] (IRQs 20 21 22) *0 [ 0.473779] ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22) *0 [ 0.473990] ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22) *0 [ 0.474201] ACPI: PCI Interrupt Link [APMU] (IRQs 20 21 22) *0, disabled. [ 0.474414] ACPI: PCI Interrupt Link [AAZA] (IRQs 20 21 22) *0 [ 0.474625] ACPI: PCI Interrupt Link [APCS] (IRQs 20 21 22) *0 [ 0.474836] ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22) *0 [ 0.475047] ACPI: PCI Interrupt Link [APCM] (IRQs 20 21 22) *0, disabled. [ 0.475258] ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22) *0, disabled. [ 0.475470] ACPI: PCI Interrupt Link [APSI] (IRQs 23) *0 [ 0.475680] ACPI: PCI Interrupt Link [APSJ] (IRQs 23) *0 [ 0.475736] Linux Plug and Play Support v0.97 (c) Adam Belay [ 0.475736] pnp: PnP ACPI init [ 0.475736] ACPI: bus type pnp registered [ 0.481694] pnp: PnP ACPI: found 15 devices [ 0.481694] ACPI: ACPI bus type pnp unregistered [ 0.481694] PCI: Using ACPI for IRQ routing [ 0.500043] NET: Registered protocol family 8 [ 0.500045] NET: Registered protocol family 20 [ 0.500062] NetLabel: Initializing [ 0.500063] NetLabel: domain hash size = 128 [ 0.500065] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.500077] NetLabel: unlabeled traffic allowed by default [ 0.500122] hpet0: at MMIO 0xfeff0000, IRQs 2, 8, 31 [ 0.500122] hpet0: 3 32-bit timers, 25000000 Hz [ 0.503560] tracer: 1286 pages allocated for 65536 entries of 80 bytes [ 0.503562] actual entries 65586 [ 0.503701] AppArmor: AppArmor Filesystem Enabled [ 0.503727] ACPI: RTC can wake from S4 [ 0.504047] Switched to high resolution mode on CPU 0 [ 0.504181] Switched to high resolution mode on CPU 1 [ 0.516041] system 00:01: ioport range 0x1000-0x107f has been reserved [ 0.516043] system 00:01: ioport range 0x1080-0x10ff has been reserved [ 0.516045] system 00:01: ioport range 0x1400-0x147f has been reserved [ 0.516047] system 00:01: ioport range 0x1480-0x14ff has been reserved [ 0.516049] system 00:01: ioport range 0x1800-0x187f has been reserved [ 0.516051] system 00:01: ioport range 0x1880-0x18ff has been reserved [ 0.516054] system 00:01: ioport range 0x2000-0x207f has been reserved [ 0.516056] system 00:01: ioport range 0x2080-0x20ff has been reserved [ 0.516062] system 00:02: ioport range 0x4d0-0x4d1 has been reserved [ 0.516064] system 00:02: ioport range 0x800-0x87f has been reserved [ 0.516067] system 00:02: ioport range 0x290-0x29f has been reserved [ 0.516069] system 00:02: ioport range 0x290-0x297 has been reserved [ 0.516083] system 00:0d: iomem range 0xf0000000-0xf3ffffff could not be reserved [ 0.516089] system 00:0e: iomem range 0xf0000-0xfffff could not be reserved [ 0.516092] system 00:0e: iomem range 0xfeff0000-0xfeff00ff could not be reserved [ 0.516095] system 00:0e: iomem range 0x77ef0000-0x77efffff could not be reserved [ 0.516097] system 00:0e: iomem range 0xffff0000-0xffffffff could not be reserved [ 0.516099] system 00:0e: iomem range 0x0-0x9ffff could not be reserved [ 0.516101] system 00:0e: iomem range 0x100000-0x77eeffff could not be reserved [ 0.516103] system 00:0e: iomem range 0x78000000-0x7fffffff could not be reserved [ 0.516106] system 00:0e: iomem range 0xfec00000-0xfec00fff could not be reserved [ 0.516108] system 00:0e: iomem range 0xfee00000-0xfeefffff could not be reserved [ 0.516110] system 00:0e: iomem range 0xfefff000-0xfeffffff could not be reserved [ 0.516112] system 00:0e: iomem range 0xfff80000-0xfff80fff could not be reserved [ 0.516115] system 00:0e: iomem range 0xfff90000-0xfffbffff could not be reserved [ 0.516117] system 00:0e: iomem range 0xfffed000-0xfffeffff could not be reserved [ 0.521378] pci 0000:00:04.0: PCI bridge, secondary bus 0000:01 [ 0.521381] pci 0000:00:04.0: IO window: 0xb000-0xbfff [ 0.521384] pci 0000:00:04.0: MEM window: 0xfd800000-0xfd8fffff [ 0.521386] pci 0000:00:04.0: PREFETCH window: 0x000000fdf00000-0x000000fdffffff [ 0.521390] pci 0000:00:09.0: PCI bridge, secondary bus 0000:02 [ 0.521392] pci 0000:00:09.0: IO window: 0xa000-0xafff [ 0.521394] pci 0000:00:09.0: MEM window: 0xfde00000-0xfdefffff [ 0.521396] pci 0000:00:09.0: PREFETCH window: 0x000000fdd00000-0x000000fddfffff [ 0.521399] pci 0000:00:0b.0: PCI bridge, secondary bus 0000:03 [ 0.521401] pci 0000:00:0b.0: IO window: 0x9000-0x9fff [ 0.521403] pci 0000:00:0b.0: MEM window: 0xfdc00000-0xfdcfffff [ 0.521405] pci 0000:00:0b.0: PREFETCH window: 0x000000fdb00000-0x000000fdbfffff [ 0.521408] pci 0000:00:0c.0: PCI bridge, secondary bus 0000:04 [ 0.521409] pci 0000:00:0c.0: IO window: 0x8000-0x8fff [ 0.521412] pci 0000:00:0c.0: MEM window: 0xfda00000-0xfdafffff [ 0.521414] pci 0000:00:0c.0: PREFETCH window: 0x000000fd900000-0x000000fd9fffff [ 0.521423] pci 0000:00:04.0: setting latency timer to 64 [ 0.521427] pci 0000:00:09.0: setting latency timer to 64 [ 0.521431] pci 0000:00:0b.0: setting latency timer to 64 [ 0.521435] pci 0000:00:0c.0: setting latency timer to 64 [ 0.521437] bus: 00 index 0 io port: [0, ffff] [ 0.521438] bus: 00 index 1 mmio: [0, ffffffffffffffff] [ 0.521440] bus: 01 index 0 io port: [b000, bfff] [ 0.521441] bus: 01 index 1 mmio: [fd800000, fd8fffff] [ 0.521443] bus: 01 index 2 mmio: [fdf00000, fdffffff] [ 0.521444] bus: 01 index 3 io port: [0, ffff] [ 0.521446] bus: 01 index 4 mmio: [0, ffffffffffffffff] [ 0.521447] bus: 02 index 0 io port: [a000, afff] [ 0.521449] bus: 02 index 1 mmio: [fde00000, fdefffff] [ 0.521450] bus: 02 index 2 mmio: [fdd00000, fddfffff] [ 0.521452] bus: 02 index 3 mmio: [0, 0] [ 0.521453] bus: 03 index 0 io port: [9000, 9fff] [ 0.521455] bus: 03 index 1 mmio: [fdc00000, fdcfffff] [ 0.521456] bus: 03 index 2 mmio: [fdb00000, fdbfffff] [ 0.521457] bus: 03 index 3 mmio: [0, 0] [ 0.521459] bus: 04 index 0 io port: [8000, 8fff] [ 0.521460] bus: 04 index 1 mmio: [fda00000, fdafffff] [ 0.521462] bus: 04 index 2 mmio: [fd900000, fd9fffff] [ 0.521463] bus: 04 index 3 mmio: [0, 0] [ 0.521476] NET: Registered protocol family 2 [ 0.560122] IP route cache hash table entries: 65536 (order: 7, 524288 bytes) [ 0.560917] TCP established hash table entries: 262144 (order: 10, 4194304 bytes) [ 0.562848] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.563353] TCP: Hash tables configured (established 262144 bind 65536) [ 0.563356] TCP reno registered [ 0.572119] NET: Registered protocol family 1 [ 0.572221] checking if image is initramfs... it is [ 1.108153] Freeing initrd memory: 8736k freed [ 1.114104] audit: initializing netlink socket (disabled) [ 1.114117] type=2000 audit(1256276883.112:1): initialized [ 1.118544] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 1.120961] VFS: Disk quotas dquot_6.5.1 [ 1.121038] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 1.121139] msgmni has been set to 3762 [ 1.121248] io scheduler noop registered [ 1.121250] io scheduler anticipatory registered [ 1.121252] io scheduler deadline registered [ 1.121369] io scheduler cfq registered (default) [ 1.121400] pci 0000:00:00.0: Enabling HT MSI Mapping [ 1.140051] pci 0000:00:04.0: Enabling HT MSI Mapping [ 1.140067] pci 0000:00:05.0: Enabling HT MSI Mapping [ 1.140093] pci 0000:00:07.0: Enabling HT MSI Mapping [ 1.140107] pci 0000:00:08.0: Enabling HT MSI Mapping [ 1.140120] pci 0000:00:08.1: Enabling HT MSI Mapping [ 1.140134] pci 0000:00:09.0: Enabling HT MSI Mapping [ 1.140149] pci 0000:00:0b.0: Enabling HT MSI Mapping [ 1.140163] pci 0000:00:0c.0: Enabling HT MSI Mapping [ 1.140177] pci 0000:00:0d.0: Boot video device [ 1.140302] pcieport-driver 0000:00:09.0: setting latency timer to 64 [ 1.140323] pcieport-driver 0000:00:09.0: found MSI capability [ 1.140341] pci_express 0000:00:09.0:pcie00: allocate port service [ 1.140395] pci_express 0000:00:09.0:pcie03: allocate port service [ 1.140470] pcieport-driver 0000:00:0b.0: setting latency timer to 64 [ 1.140489] pcieport-driver 0000:00:0b.0: found MSI capability [ 1.140509] pci_express 0000:00:0b.0:pcie00: allocate port service [ 1.140560] pci_express 0000:00:0b.0:pcie03: allocate port service [ 1.140631] pcieport-driver 0000:00:0c.0: setting latency timer to 64 [ 1.140650] pcieport-driver 0000:00:0c.0: found MSI capability [ 1.140665] pci_express 0000:00:0c.0:pcie00: allocate port service [ 1.140714] pci_express 0000:00:0c.0:pcie03: allocate port service [ 1.178573] hpet_resources: 0xfeff0000 is busy [ 1.178673] Linux agpgart interface v0.103 [ 1.178677] Serial: 8250/16550 driver4 ports, IRQ sharing enabled [ 1.178832] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 1.179543] 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 1.181864] brd: module loaded [ 1.181942] input: Macintosh mouse button emulation as /devices/virtual/input/input0 [ 1.182084] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 1.182501] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.182506] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 1.204225] mice: PS/2 mouse device common for all mice [ 1.204376] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0 [ 1.204411] rtc0: alarms up to one year, y3k, hpet irqs [ 1.204457] cpuidle: using governor ladder [ 1.204459] cpuidle: using governor menu [ 1.204768] TCP cubic registered [ 1.205005] registered taskstats version 1 [ 1.205118] Magic number: 13:69:821 [ 1.205186] tty ptyt1: hash matches [ 1.205264] rtc_cmos 00:05: setting system clock to 2009-10-23 05:48:03 UTC (1256276883) [ 1.205267] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 1.205268] EDD information not available. [ 1.205303] Freeing unused kernel memory: 540k freed [ 1.205589] Write protecting the kernel read-only data: 4348k [ 1.222267] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1 [ 1.274728] vesafb: framebuffer at 0xe0000000, mapped to 0xffffc20004980000, using 6144k, total 131072k [ 1.274732] vesafb: mode is 1024x768x32, linelength=4096, pages=1 [ 1.274733] vesafb: scrolling: redraw [ 1.274736] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0 [ 1.274907] Console: switching to colour frame buffer device 128x48 [ 1.289438] fb0: VESA VGA frame buffer device [ 1.382117] fuse init (API version 7.9) [ 1.388093] fan PNP0C0B:00: registered as cooling_device0 [ 1.388099] ACPI: Fan [FAN] (on) [ 1.392553] processor ACPI0007:00: registered as cooling_device1 [ 1.392621] processor ACPI0007:01: registered as cooling_device2 [ 1.394507] ACPI: Expecting a [Reference] package element, found type 0 [ 1.394761] thermal LNXTHERM:01: registered as thermal_zone0 [ 1.395117] ACPI: Thermal Zone [THRM] (40 C) [ 1.500100] usbcore: registered new interface driver usbfs [ 1.500125] usbcore: registered new interface driver hub [ 1.500162] usbcore: registered new device driver usb [ 1.501560] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.501988] ACPI: PCI Interrupt Link [APCF] enabled at IRQ 22 [ 1.501998] ohci_hcd 0000:00:02.0: PCI INT A -> Link[APCF] -> GSI 22 (level, low) -> IRQ 22 [ 1.502011] ohci_hcd 0000:00:02.0: setting latency timer to 64 [ 1.502013] ohci_hcd 0000:00:02.0: OHCI Host Controller [ 1.502063] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 1 [ 1.502088] ohci_hcd 0000:00:02.0: irq 22, io mem 0xfe02f000 [ 1.508563] Warning! ehci_hcd should always be loaded before uhci_hcd and ohci_hcd, not after [ 1.510545] No dock devices found. [ 1.521821] SCSI subsystem initialized [ 1.535478] libata version 3.00 loaded. [ 1.562161] usb usb1: configuration #1 chosen from 1 choice [ 1.562186] hub 1-0:1.0: USB hub found [ 1.562195] hub 1-0:1.0: 10 ports detected [ 1.772952] ACPI: PCI Interrupt Link [APCL] enabled at IRQ 21 [ 1.772964] ehci_hcd 0000:00:02.1: PCI INT B -> Link[APCL] -> GSI 21 (level, low) -> IRQ 21 [ 1.772978] ehci_hcd 0000:00:02.1: setting latency timer to 64 [ 1.772980] ehci_hcd 0000:00:02.1: EHCI Host Controller [ 1.773047] ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 2 [ 1.773078] ehci_hcd 0000:00:02.1: debug port 1 [ 1.773082] ehci_hcd 0000:00:02.1: cache line size of 64 is not supported [ 1.773102] ehci_hcd 0000:00:02.1: irq 21, io mem 0xfe02e000 [ 1.944526] usb 1-4: new full speed USB device using ohci_hcd and address 2 [ 1.956512] ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 1.956675] usb usb2: configuration #1 chosen from 1 choice [ 1.956701] hub 2-0:1.0: USB hub found [ 1.956708] hub 2-0:1.0: 10 ports detected [ 2.012030] hub 1-0:1.0: unable to enumerate USB device on port 4 [ 2.164954] pata_amd 0000:00:06.0: version 0.3.10 [ 2.165002] pata_amd 0000:00:06.0: setting latency timer to 64 [ 2.165095] scsi0 : pata_amd [ 2.165279] scsi1 : pata_amd [ 2.166013] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000 irq 14 [ 2.166015] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xf008 irq 15 [ 2.330985] ata2: port disabled. ignoring. [ 2.331033] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.61. [ 2.331477] ACPI: PCI Interrupt Link [APCH] enabled at IRQ 20 [ 2.331487] forcedeth 0000:00:07.0: PCI INT A -> Link[APCH] -> GSI 20 (level, low) -> IRQ 20 [ 2.331491] forcedeth 0000:00:07.0: setting latency timer to 64 [ 2.492021] usb 2-6: new high speed USB device using ehci_hcd and address 3 [ 2.626494] usb 2-6: configuration #1 chosen from 1 choice [ 2.848750] forcedeth 0000:00:07.0: ifname eth0, PHY OUI 0x732 @ 1, addr 00:e0:4d:93:21:e0 [ 2.848754] forcedeth 0000:00:07.0: highdma pwrctl mgmt timirq lnktim msi desc-v3 [ 2.848809] sata_nv 0000:00:08.0: version 3.5 [ 2.849213] ACPI: PCI Interrupt Link [APSI] enabled at IRQ 23 [ 2.849223] sata_nv 0000:00:08.0: PCI INT A -> Link[APSI] -> GSI 23 (level, low) -> IRQ 23 [ 2.849262] sata_nv 0000:00:08.0: setting latency timer to 64 [ 2.849336] scsi2 : sata_nv [ 2.849579] scsi3 : sata_nv [ 2.849745] ata3: SATA max UDMA/133 cmd 0x9f0 ctl 0xbf0 bmdma 0xd800 irq 23 [ 2.849747] ata4: SATA max UDMA/133 cmd 0x970 ctl 0xb70 bmdma 0xd808 irq 23 [ 2.928016] usb 1-4: new full speed USB device using ohci_hcd and address 3 [ 3.140237] usb 1-4: configuration #1 chosen from 1 choice [ 3.316035] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 3.324114] ata3.00: ATAPI: HP DVD Writer 1060r, QH23, max UDMA/100 [ 3.340115] ata3.00: configured for UDMA/100 [ 3.808034] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 3.816210] ata4.00: ATA-7: SAMSUNG HD252HJ, 1AC01113, max UDMA7 [ 3.816213] ata4.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 0/32) [ 3.824208] ata4.00: configured for UDMA/133 [ 3.824249] isa bounce pool size: 16 pages [ 3.825256] scsi 2:0:0:0: CD-ROM HP DVD Writer 1060r QH23 PQ: 0 ANSI: 5 [ 3.825551] scsi 3:0:0:0: Direct-Access ATA SAMSUNG HD252HJ 1AC0 PQ: 0 ANSI: 5 [ 3.826140] ACPI: PCI Interrupt Link [APSJ] enabled at IRQ 23 [ 3.826144] sata_nv 0000:00:08.1: PCI INT B -> Link[APSJ] -> GSI 23 (level, low) -> IRQ 23 [ 3.826183] sata_nv 0000:00:08.1: setting latency timer to 64 [ 3.826251] scsi4 : sata_nv [ 3.826424] scsi5 : sata_nv [ 3.826592] ata5: SATA max UDMA/133 cmd 0x9e0 ctl 0xbe0 bmdma 0xc400 irq 23 [ 3.826595] ata6: SATA max UDMA/133 cmd 0x960 ctl 0xb60 bmdma 0xc408 irq 23 [ 4.467391] usbcore: registered new interface driver libusual [ 4.471607] Initializing USB Mass Storage driver... [ 4.471687] scsi6 : SCSI emulation for USB Mass Storage devices [ 4.471780] usbcore: registered new interface driver usb-storage [ 4.471785] USB Mass Storage support registered. [ 4.471935] usb-storage: device found at 3 [ 4.471937] usb-storage: waiting for device to settle before scanning [ 4.476239] Driver 'sr' needs updating - please use bus_type methods [ 4.482347] sr0: scsi3-mmc drive: 48x/12x writer dvd-ram cd/rw xa/form2 cdda tray [ 4.482352] Uniform CD-ROM driver Revision: 3.20 [ 4.482458] sr 2:0:0:0: Attached scsi CD-ROM sr0 [ 4.482581] Driver 'sd' needs updating - please use bus_type methods [ 4.485951] sd 3:0:0:0: [sda] 488397168 512-byte hardware sectors (250059 MB) [ 4.486058] sd 3:0:0:0: [sda] Write Protect is off [ 4.486060] sd 3:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 4.486268] sr 2:0:0:0: Attached scsi generic sg0 type 5 [ 4.486305] sd 3:0:0:0: Attached scsi generic sg1 type 0 [ 4.486474] sd 3:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 4.486542] sd 3:0:0:0: [sda] 488397168 512-byte hardware sectors (250059 MB) [ 4.486554] sd 3:0:0:0: [sda] Write Protect is off [ 4.486557] sd 3:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 4.486578] sd 3:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 4.486582] sda: sda1 [ 4.498301] sd 3:0:0:0: [sda] Attached SCSI disk [ 5.182062] loop: module loaded [ 5.201341] EXT3-fs: INFO: recovery required on readonly filesystem. [ 5.201345] EXT3-fs: write access will be enabled during recovery. [ 7.339022] kjournald starting. Commit interval 5 seconds [ 7.339041] EXT3-fs: loop0: orphan cleanup on readonly fs [ 7.339049] ext3_orphan_cleanup: deleting unreferenced inode 211932 [ 7.347408] ext3_orphan_cleanup: deleting unreferenced inode 131126 [ 7.347418] EXT3-fs: loop0: 2 orphan inodes deleted [ 7.347419] EXT3-fs: recovery complete. [ 7.348473] EXT3-fs: mounted filesystem with ordered data mode. [ 9.468684] usb-storage: device scan complete [ 9.469272] scsi 6:0:0:0: Direct-Access Generic USB SD Reader 1.00 PQ: 0 ANSI: 0 [ 9.469763] scsi 6:0:0:1: Direct-Access Generic USB CF Reader 1.01 PQ: 0 ANSI: 0 [ 9.470263] scsi 6:0:0:2: Direct-Access Generic USB SM Reader 1.02 PQ: 0 ANSI: 0 [ 9.470762] scsi 6:0:0:3: Direct-Access Generic USB MS Reader 1.03 PQ: 0 ANSI: 0 [ 9.599952] sd 6:0:0:0: [sdb] Attached SCSI removable disk [ 9.600053] sd 6:0:0:0: Attached scsi generic sg2 type 0 [ 9.600808] sd 6:0:0:1: [sdc] Attached SCSI removable disk [ 9.600855] sd 6:0:0:1: Attached scsi generic sg3 type 0 [ 9.601680] sd 6:0:0:2: [sdd] Attached SCSI removable disk [ 9.601724] sd 6:0:0:2: Attached scsi generic sg4 type 0 [ 9.602560] sd 6:0:0:3: [sde] Attached SCSI removable disk [ 9.602603] sd 6:0:0:3: Attached scsi generic sg5 type 0 [ 13.351624] udev: starting version 141 [ 13.539414] input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2 [ 13.556566] ACPI: Power Button (FF) [PWRF] [ 13.556657] input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input3 [ 13.584611] ACPI: Power Button (CM) [PWRB] [ 14.085850] parport_pc 00:0a: reported by Plug and Play ACPI [ 14.085898] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE] [ 14.102967] Linux video capture interface: v2.00 [ 14.129110] input: PC Speaker as /devices/platform/pcspkr/input/input4 [ 14.165351] i2c-adapter i2c-0: nForce2 SMBus adapter at 0x1c00 [ 14.165369] i2c-adapter i2c-1: nForce2 SMBus adapter at 0xf400 [ 14.482145] nvidia: module license 'NVIDIA' taints kernel. [ 14.738819] ACPI: PCI Interrupt Link [AIGP] enabled at IRQ 22 [ 14.738827] nvidia 0000:00:0d.0: PCI INT A -> Link[AIGP] -> GSI 22 (level, low) -> IRQ 22 [ 14.738835] nvidia 0000:00:0d.0: setting latency timer to 64 [ 14.739069] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 180.44 Tue Mar 24 05:46:32 PST 2009 [ 14.757160] ppdev: user-space parallel port driver [ 14.872488] gspca: main v2.2.0 registered [ 14.898234] gspca: probing 0ac8:307b [ 15.066818] ACPI: PCI Interrupt Link [AAZA] enabled at IRQ 21 [ 15.066823] HDA Intel 0000:00:05.0: PCI INT B -> Link[AAZA] -> GSI 21 (level, low) -> IRQ 21 [ 15.066842] HDA Intel 0000:00:05.0: setting latency timer to 64 [ 15.099344] hda_codec: Unknown model for ALC662, trying auto-probe from BIOS... [ 15.452867] input: ImPS/2 Generic Wheel Mouse as /devices/platform/i8042/serio1/input/input5 [ 16.791043] zc3xx: probe 2wr ov vga 0x0000 [ 16.960042] zc3xx: probe 3wr vga 1 0x4001 [ 17.263041] zc3xx: probe 3wr vga 2 0x2030 [ 17.308042] zc3xx: sensor PO2030 rev 0x03 [ 17.320042] zc3xx: probe sensor -> 2030 [ 17.320044] zc3xx: Find Sensor PO2030 [ 17.329462] gspca: probe ok [ 17.329510] usbcore: registered new interface driver zc3xx [ 17.330769] zc3xx: registered [ 17.466856] lp0: using parport0 (interrupt-driven). [ 18.176251] EXT3 FS on loop0, internal journal [ 19.569108] type=1505 audit(1256284101.862:2): operation="profile_load" name="/usr/share/gdm/guest-session/Xsession" name2="default" pid=4426 [ 19.608752] type=1505 audit(1256284101.902:3): operation="profile_load" name="/sbin/dhclient-script" name2="default" pid=4430 [ 19.608903] type=1505 audit(1256284101.902:4): operation="profile_load" name="/sbin/dhclient3" name2="default" pid=4430 [ 19.608956] type=1505 audit(1256284101.902:5): operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" name2="default" pid=4430 [ 19.609000] type=1505 audit(1256284101.902:6): operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" name2="default" pid=4430 [ 19.715501] type=1505 audit(1256284102.006:7): operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" name2="default" pid=4435 [ 19.715691] type=1505 audit(1256284102.006:8): operation="profile_load" name="/usr/sbin/cupsd" name2="default" pid=4435 [ 19.741920] type=1505 audit(1256284102.034:9): operation="profile_load" name="/usr/sbin/tcpdump" name2="default" pid=4439 [ 20.450757] ACPI: WMI: Mapper loaded [ 20.678432] powernow-k8: Found 1 AMD Athlon(tm) 64 X2 Dual Core Processor 5200+ processors (2 cpu cores) (version 2.20.00) [ 20.678775] powernow-k8: 0 : fid 0x13 (2700 MHz), vid 0x9 [ 20.678779] powernow-k8: 1 : fid 0x12 (2600 MHz), vid 0xa [ 20.678781] powernow-k8: 2 : fid 0x10 (2400 MHz), vid 0xc [ 20.678783] powernow-k8: 3 : fid 0xe (2200 MHz), vid 0xe [ 20.678785] powernow-k8: 4 : fid 0xc (2000 MHz), vid 0x10 [ 20.678786] powernow-k8: 5 : fid 0xa (1800 MHz), vid 0x10 [ 20.678788] powernow-k8: 6 : fid 0x2 (1000 MHz), vid 0x12 [ 28.000526] Clocksource tsc unstable (delta = -292054458 ns) [ 29.357600] Bluetooth: Core ver 2.13 [ 29.360786] NET: Registered protocol family 31 [ 29.360797] Bluetooth: HCI device and connection manager initialized [ 29.360805] Bluetooth: HCI socket layer initialized [ 29.375483] Bluetooth: L2CAP ver 2.11 [ 29.375495] Bluetooth: L2CAP socket layer initialized [ 29.400301] Bluetooth: RFCOMM socket layer initialized [ 29.402339] Bluetooth: RFCOMM TTY layer initialized [ 29.402350] Bluetooth: RFCOMM ver 1.10