[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.32-21-generic (buildd@yellow) (gcc version 4.4.3 (Ubuntu 4.4.3-4ubuntu5) ) #31-Ubuntu SMP Tue Apr 13 20:37:36 UTC 2010 (Ubuntu 2.6.32-21.31-generic 2.6.32.11+drm33.2) [ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-2.6.32-21-generic root=/dev/mapper/mweinelt--desktop-root ro quiet splash [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Centaur CentaurHauls [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable) [ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 00000000cfeb0000 (usable) [ 0.000000] BIOS-e820: 00000000cfeb0000 - 00000000cfee3000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000cfee3000 - 00000000cfef0000 (ACPI data) [ 0.000000] BIOS-e820: 00000000cfef0000 - 00000000cff00000 (reserved) [ 0.000000] BIOS-e820: 00000000e0000000 - 00000000e4000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved) [ 0.000000] BIOS-e820: 0000000100000000 - 0000000230000000 (usable) [ 0.000000] DMI 2.4 present. [ 0.000000] last_pfn = 0x230000 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-CBFFF write-protect [ 0.000000] CC000-EFFFF uncachable [ 0.000000] F0000-FFFFF write-through [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000 mask F00000000 write-back [ 0.000000] 1 base 0E0000000 mask FE0000000 uncachable [ 0.000000] 2 base 0D0000000 mask FF0000000 uncachable [ 0.000000] 3 base 100000000 mask F00000000 write-back [ 0.000000] 4 base 200000000 mask FC0000000 write-back [ 0.000000] 5 base 230000000 mask FF0000000 uncachable [ 0.000000] 6 base 0CFF00000 mask FFFF00000 uncachable [ 0.000000] 7 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] e820 update range: 00000000cff00000 - 0000000100000000 (usable) ==> (reserved) [ 0.000000] last_pfn = 0xcfeb0 max_arch_pfn = 0x400000000 [ 0.000000] e820 update range: 0000000000001000 - 0000000000006000 (usable) ==> (reserved) [ 0.000000] Scanning 1 areas for low memory corruption [ 0.000000] modified physical RAM map: [ 0.000000] modified: 0000000000000000 - 0000000000001000 (usable) [ 0.000000] modified: 0000000000001000 - 0000000000006000 (reserved) [ 0.000000] modified: 0000000000006000 - 000000000009f800 (usable) [ 0.000000] modified: 000000000009f800 - 00000000000a0000 (reserved) [ 0.000000] modified: 00000000000f0000 - 0000000000100000 (reserved) [ 0.000000] modified: 0000000000100000 - 00000000cfeb0000 (usable) [ 0.000000] modified: 00000000cfeb0000 - 00000000cfee3000 (ACPI NVS) [ 0.000000] modified: 00000000cfee3000 - 00000000cfef0000 (ACPI data) [ 0.000000] modified: 00000000cfef0000 - 00000000cff00000 (reserved) [ 0.000000] modified: 00000000e0000000 - 00000000e4000000 (reserved) [ 0.000000] modified: 00000000fec00000 - 0000000100000000 (reserved) [ 0.000000] modified: 0000000100000000 - 0000000230000000 (usable) [ 0.000000] initial memory mapped : 0 - 20000000 [ 0.000000] init_memory_mapping: 0000000000000000-00000000cfeb0000 [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] 0000000000 - 00cfe00000 page 2M [ 0.000000] 00cfe00000 - 00cfeb0000 page 4k [ 0.000000] kernel direct mapping tables up to cfeb0000 @ 8000-e000 [ 0.000000] init_memory_mapping: 0000000100000000-0000000230000000 [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] 0100000000 - 0230000000 page 2M [ 0.000000] kernel direct mapping tables up to 230000000 @ c000-16000 [ 0.000000] RAMDISK: 371e3000 - 37fefa3a [ 0.000000] ACPI: RSDP 00000000000f7610 00014 (v00 GBT ) [ 0.000000] ACPI: RSDT 00000000cfee3040 00038 (v01 GBT GBTUACPI 42302E31 GBTU 01010101) [ 0.000000] ACPI: FACP 00000000cfee30c0 00074 (v01 GBT GBTUACPI 42302E31 GBTU 01010101) [ 0.000000] ACPI: DSDT 00000000cfee3180 03A77 (v01 GBT GBTUACPI 00001000 MSFT 0100000C) [ 0.000000] ACPI: FACS 00000000cfeb0000 00040 [ 0.000000] ACPI: HPET 00000000cfee6d40 00038 (v01 GBT GBTUACPI 42302E31 GBTU 00000098) [ 0.000000] ACPI: MCFG 00000000cfee6dc0 0003C (v01 GBT GBTUACPI 42302E31 GBTU 01010101) [ 0.000000] ACPI: APIC 00000000cfee6c40 00084 (v01 GBT GBTUACPI 42302E31 GBTU 01010101) [ 0.000000] ACPI: SSDT 00000000cfee77a0 003AB (v01 PmRef CpuPm 00003000 INTL 20040311) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at 0000000000000000-0000000230000000 [ 0.000000] Bootmem setup node 0 0000000000000000-0000000230000000 [ 0.000000] NODE_DATA [0000000000011000 - 0000000000015fff] [ 0.000000] bootmap [0000000000016000 - 000000000005bfff] pages 46 [ 0.000000] (8 early reservations) ==> bootmem [0000000000 - 0230000000] [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] [ 0.000000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000] [ 0.000000] #2 [0001000000 - 0001a29e64] TEXT DATA BSS ==> [0001000000 - 0001a29e64] [ 0.000000] #3 [00371e3000 - 0037fefa3a] RAMDISK ==> [00371e3000 - 0037fefa3a] [ 0.000000] #4 [000009f800 - 0000100000] BIOS reserved ==> [000009f800 - 0000100000] [ 0.000000] #5 [0001a2a000 - 0001a2a0f6] BRK ==> [0001a2a000 - 0001a2a0f6] [ 0.000000] #6 [0000008000 - 000000c000] PGTABLE ==> [0000008000 - 000000c000] [ 0.000000] #7 [000000c000 - 0000011000] PGTABLE ==> [000000c000 - 0000011000] [ 0.000000] found SMP MP-table at [ffff8800000f57e0] f57e0 [ 0.000000] [ffffea0000000000-ffffea0007bfffff] PMD -> [ffff880028600000-ffff88002f7fffff] on node 0 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000000 -> 0x00001000 [ 0.000000] DMA32 0x00001000 -> 0x00100000 [ 0.000000] Normal 0x00100000 -> 0x00230000 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[4] active PFN ranges [ 0.000000] 0: 0x00000000 -> 0x00000001 [ 0.000000] 0: 0x00000006 -> 0x0000009f [ 0.000000] 0: 0x00000100 -> 0x000cfeb0 [ 0.000000] 0: 0x00100000 -> 0x00230000 [ 0.000000] On node 0 totalpages: 2096714 [ 0.000000] DMA zone: 56 pages used for memmap [ 0.000000] DMA zone: 108 pages reserved [ 0.000000] DMA zone: 3830 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 14280 pages used for memmap [ 0.000000] DMA32 zone: 833256 pages, LIFO batch:31 [ 0.000000] Normal zone: 17024 pages used for memmap [ 0.000000] Normal zone: 1228160 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0x408 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x03] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] SMP: Allowing 4 CPUs, 0 hotplug CPUs [ 0.000000] nr_irqs_gsi: 24 [ 0.000000] PM: Registered nosave memory: 0000000000001000 - 0000000000006000 [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000 [ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000 [ 0.000000] PM: Registered nosave memory: 00000000cfeb0000 - 00000000cfee3000 [ 0.000000] PM: Registered nosave memory: 00000000cfee3000 - 00000000cfef0000 [ 0.000000] PM: Registered nosave memory: 00000000cfef0000 - 00000000cff00000 [ 0.000000] PM: Registered nosave memory: 00000000cff00000 - 00000000e0000000 [ 0.000000] PM: Registered nosave memory: 00000000e0000000 - 00000000e4000000 [ 0.000000] PM: Registered nosave memory: 00000000e4000000 - 00000000fec00000 [ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 0000000100000000 [ 0.000000] Allocating PCI resources starting at e4000000 (gap: e4000000:1ac00000) [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:4 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 30 pages/cpu @ffff880028200000 s91544 r8192 d23144 u524288 [ 0.000000] pcpu-alloc: s91544 r8192 d23144 u524288 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2065246 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-2.6.32-21-generic root=/dev/mapper/mweinelt--desktop-root ro quiet splash [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Initializing CPU#0 [ 0.000000] Checking aperture... [ 0.000000] No AGP bridge found [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing! [ 0.000000] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 0.000000] Placing 64MB software IO TLB between ffff880020000000 - ffff880024000000 [ 0.000000] software IO TLB at phys 0x20000000 - 0x24000000 [ 0.000000] Memory: 8178540k/9175040k available (5409k kernel code, 788184k absent, 208316k reserved, 2976k data, 876k init) [ 0.000000] SLUB: Genslabs=14, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] NR_IRQS:4352 nr_irqs:440 [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] allocated 83886080 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] hpet clockevent registered [ 0.000000] HPET: 4 timers in total, 0 timers will be used for per-cpu timer [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 2666.522 MHz processor. [ 0.000006] Calibrating delay loop (skipped), value calculated using timer frequency.. 5333.04 BogoMIPS (lpj=26665220) [ 0.000028] Security Framework initialized [ 0.000044] AppArmor: AppArmor initialized [ 0.010527] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes) [ 0.013511] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.014896] Mount-cache hash table entries: 256 [ 0.015012] Initializing cgroup subsys ns [ 0.015017] Initializing cgroup subsys cpuacct [ 0.015019] Initializing cgroup subsys memory [ 0.015026] Initializing cgroup subsys devices [ 0.015027] Initializing cgroup subsys freezer [ 0.015029] Initializing cgroup subsys net_cls [ 0.015046] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.015047] CPU: L2 cache: 6144K [ 0.015050] CPU 0/0x0 -> Node 0 [ 0.015052] CPU: Physical Processor ID: 0 [ 0.015053] CPU: Processor Core ID: 0 [ 0.015056] mce: CPU supports 6 MCE banks [ 0.015062] CPU0: Thermal monitoring enabled (TM2) [ 0.015066] using mwait in idle threads. [ 0.015067] Performance Events: Core2 events, Intel PMU driver. [ 0.015072] ... version: 2 [ 0.015073] ... bit width: 40 [ 0.015074] ... generic registers: 2 [ 0.015075] ... value mask: 000000ffffffffff [ 0.015077] ... max period: 000000007fffffff [ 0.015078] ... fixed-purpose events: 3 [ 0.015079] ... event mask: 0000000700000003 [ 0.017835] ACPI: Core revision 20090903 [ 0.024511] ftrace: converting mcount calls to 0f 1f 44 00 00 [ 0.024518] ftrace: allocating 22518 entries in 89 pages [ 0.030040] Setting APIC routing to flat [ 0.030339] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.132712] CPU0: Intel(R) Core(TM)2 Quad CPU Q9450 @ 2.66GHz stepping 07 [ 0.140000] Booting processor 1 APIC 0x3 ip 0x6000 [ 0.010000] Initializing CPU#1 [ 0.010000] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.010000] CPU: L2 cache: 6144K [ 0.010000] CPU 1/0x3 -> Node 0 [ 0.010000] CPU: Physical Processor ID: 0 [ 0.010000] CPU: Processor Core ID: 3 [ 0.010000] CPU1: Thermal monitoring enabled (TM2) [ 0.290110] CPU1: Intel(R) Core(TM)2 Quad CPU Q9450 @ 2.66GHz stepping 07 [ 0.290118] checking TSC synchronization [CPU#0 -> CPU#1]: passed. [ 0.300104] Booting processor 2 APIC 0x1 ip 0x6000 [ 0.010000] Initializing CPU#2 [ 0.010000] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.010000] CPU: L2 cache: 6144K [ 0.010000] CPU 2/0x1 -> Node 0 [ 0.010000] CPU: Physical Processor ID: 0 [ 0.010000] CPU: Processor Core ID: 1 [ 0.010000] CPU2: Thermal monitoring enabled (TM2) [ 0.460036] CPU2: Intel(R) Core(TM)2 Quad CPU Q9450 @ 2.66GHz stepping 07 [ 0.460041] checking TSC synchronization [CPU#0 -> CPU#2]: passed. [ 0.470095] Booting processor 3 APIC 0x2 ip 0x6000 [ 0.010000] Initializing CPU#3 [ 0.010000] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.010000] CPU: L2 cache: 6144K [ 0.010000] CPU 3/0x2 -> Node 0 [ 0.010000] CPU: Physical Processor ID: 0 [ 0.010000] CPU: Processor Core ID: 2 [ 0.010000] CPU3: Thermal monitoring enabled (TM2) [ 0.630051] CPU3: Intel(R) Core(TM)2 Quad CPU Q9450 @ 2.66GHz stepping 07 [ 0.630057] checking TSC synchronization [CPU#0 -> CPU#3]: passed. [ 0.640009] Brought up 4 CPUs [ 0.640011] Total of 4 processors activated (21331.10 BogoMIPS). [ 0.642345] CPU0 attaching sched-domain: [ 0.642348] domain 0: span 0,2 level MC [ 0.642349] groups: 0 2 [ 0.642352] domain 1: span 0-3 level CPU [ 0.642354] groups: 0,2 (cpu_power = 2048) 1,3 (cpu_power = 2048) [ 0.642360] CPU1 attaching sched-domain: [ 0.642362] domain 0: span 1,3 level MC [ 0.642363] groups: 1 3 [ 0.642366] domain 1: span 0-3 level CPU [ 0.642368] groups: 1,3 (cpu_power = 2048) 0,2 (cpu_power = 2048) [ 0.642372] CPU2 attaching sched-domain: [ 0.642374] domain 0: span 0,2 level MC [ 0.642375] groups: 2 0 [ 0.642378] domain 1: span 0-3 level CPU [ 0.642379] groups: 0,2 (cpu_power = 2048) 1,3 (cpu_power = 2048) [ 0.642384] CPU3 attaching sched-domain: [ 0.642385] domain 0: span 1,3 level MC [ 0.642387] groups: 3 1 [ 0.642389] domain 1: span 0-3 level CPU [ 0.642391] groups: 1,3 (cpu_power = 2048) 0,2 (cpu_power = 2048) [ 0.642522] devtmpfs: initialized [ 0.642522] regulator: core version 0.5 [ 0.642522] Time: 9:43:16 Date: 04/16/10 [ 0.642522] NET: Registered protocol family 16 [ 0.642522] Trying to unpack rootfs image as initramfs... [ 0.642522] ACPI: bus type pci registered [ 0.642522] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 63 [ 0.642522] PCI: MCFG area at e0000000 reserved in E820 [ 0.642522] PCI: Using MMCONFIG at e0000000 - e3ffffff [ 0.642522] PCI: Using configuration type 1 for base access [ 0.642522] bio: create slab at 0 [ 0.642522] ACPI: EC: Look up EC in DSDT [ 0.650332] ACPI: Interpreter enabled [ 0.650337] ACPI: (supports S0 S3 S4 S5) [ 0.650355] ACPI: Using IOAPIC for interrupt routing [ 0.653768] ACPI: No dock devices found. [ 0.653848] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 0.653931] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold [ 0.653933] pci 0000:00:01.0: PME# disabled [ 0.653992] pci 0000:00:1a.0: reg 20 io port: [0xe000-0xe01f] [ 0.654049] pci 0000:00:1a.1: reg 20 io port: [0xe100-0xe11f] [ 0.654105] pci 0000:00:1a.2: reg 20 io port: [0xe500-0xe51f] [ 0.654154] pci 0000:00:1a.7: reg 10 32bit mmio: [0xea305000-0xea3053ff] [ 0.654220] pci 0000:00:1b.0: reg 10 64bit mmio: [0xea300000-0xea303fff] [ 0.654254] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.654257] pci 0000:00:1b.0: PME# disabled [ 0.654307] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.654310] pci 0000:00:1c.0: PME# disabled [ 0.654364] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold [ 0.654367] pci 0000:00:1c.4: PME# disabled [ 0.654420] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold [ 0.654423] pci 0000:00:1c.5: PME# disabled [ 0.654469] pci 0000:00:1d.0: reg 20 io port: [0xe200-0xe21f] [ 0.654525] pci 0000:00:1d.1: reg 20 io port: [0xe300-0xe31f] [ 0.654582] pci 0000:00:1d.2: reg 20 io port: [0xe400-0xe41f] [ 0.654632] pci 0000:00:1d.7: reg 10 32bit mmio: [0xea304000-0xea3043ff] [ 0.654769] pci 0000:00:1f.0: quirk: region 0400-047f claimed by ICH6 ACPI/GPIO/TCO [ 0.654772] pci 0000:00:1f.0: quirk: region 0480-04bf claimed by ICH6 GPIO [ 0.654775] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0800 (mask 000f) [ 0.654778] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 0290 (mask 000f) [ 0.654781] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 4700 (mask 000b) [ 0.654824] pci 0000:00:1f.2: reg 10 io port: [0x00-0x07] [ 0.654829] pci 0000:00:1f.2: reg 14 io port: [0x00-0x03] [ 0.654833] pci 0000:00:1f.2: reg 18 io port: [0x00-0x07] [ 0.654837] pci 0000:00:1f.2: reg 1c io port: [0x00-0x03] [ 0.654842] pci 0000:00:1f.2: reg 20 io port: [0xf000-0xf00f] [ 0.654846] pci 0000:00:1f.2: reg 24 io port: [0xf100-0xf10f] [ 0.654885] pci 0000:00:1f.3: reg 10 64bit mmio: [0xea306000-0xea3060ff] [ 0.654896] pci 0000:00:1f.3: reg 20 io port: [0x500-0x51f] [ 0.654932] pci 0000:00:1f.5: reg 10 io port: [0xe700-0xe707] [ 0.654936] pci 0000:00:1f.5: reg 14 io port: [0xe800-0xe803] [ 0.654941] pci 0000:00:1f.5: reg 18 io port: [0xe900-0xe907] [ 0.654945] pci 0000:00:1f.5: reg 1c io port: [0xea00-0xea03] [ 0.654950] pci 0000:00:1f.5: reg 20 io port: [0xeb00-0xeb0f] [ 0.654954] pci 0000:00:1f.5: reg 24 io port: [0xec00-0xec0f] [ 0.654999] pci 0000:01:00.0: reg 10 32bit mmio: [0xe6000000-0xe6ffffff] [ 0.655005] pci 0000:01:00.0: reg 14 64bit mmio pref: [0xd0000000-0xdfffffff] [ 0.655012] pci 0000:01:00.0: reg 1c 64bit mmio: [0xe4000000-0xe5ffffff] [ 0.655016] pci 0000:01:00.0: reg 24 io port: [0xa000-0xa07f] [ 0.655020] pci 0000:01:00.0: reg 30 32bit mmio pref: [0x000000-0x01ffff] [ 0.655068] pci 0000:00:01.0: bridge io port: [0xa000-0xafff] [ 0.655071] pci 0000:00:01.0: bridge 32bit mmio: [0xe4000000-0xe7ffffff] [ 0.655074] pci 0000:00:01.0: bridge 64bit mmio pref: [0xd0000000-0xdfffffff] [ 0.655152] pci 0000:03:00.0: reg 10 io port: [0xb000-0xb0ff] [ 0.655169] pci 0000:03:00.0: reg 18 64bit mmio pref: [0xea010000-0xea010fff] [ 0.655182] pci 0000:03:00.0: reg 20 64bit mmio pref: [0xea000000-0xea00ffff] [ 0.655189] pci 0000:03:00.0: reg 30 32bit mmio pref: [0x000000-0x00ffff] [ 0.655223] pci 0000:03:00.0: supports D1 D2 [ 0.655225] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.655229] pci 0000:03:00.0: PME# disabled [ 0.655278] pci 0000:00:1c.4: bridge io port: [0xb000-0xbfff] [ 0.655281] pci 0000:00:1c.4: bridge 32bit mmio: [0xe8000000-0xe8ffffff] [ 0.655285] pci 0000:00:1c.4: bridge 64bit mmio pref: [0xea000000-0xea0fffff] [ 0.655326] pci 0000:04:00.0: reg 10 io port: [0xc000-0xc0ff] [ 0.655343] pci 0000:04:00.0: reg 18 64bit mmio pref: [0xea110000-0xea110fff] [ 0.655356] pci 0000:04:00.0: reg 20 64bit mmio pref: [0xea100000-0xea10ffff] [ 0.655363] pci 0000:04:00.0: reg 30 32bit mmio pref: [0x000000-0x00ffff] [ 0.655400] pci 0000:04:00.0: supports D1 D2 [ 0.655401] pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.655405] pci 0000:04:00.0: PME# disabled [ 0.655454] pci 0000:00:1c.5: bridge io port: [0xc000-0xcfff] [ 0.655457] pci 0000:00:1c.5: bridge 32bit mmio: [0xe9000000-0xe9ffffff] [ 0.655462] pci 0000:00:1c.5: bridge 64bit mmio pref: [0xea100000-0xea1fffff] [ 0.655490] pci 0000:05:00.0: reg 10 io port: [0xd000-0xd03f] [ 0.655529] pci 0000:05:00.0: supports D1 D2 [ 0.655557] pci 0000:05:00.1: reg 10 io port: [0xd100-0xd107] [ 0.655595] pci 0000:05:00.1: supports D1 D2 [ 0.655624] pci 0000:05:00.2: reg 10 32bit mmio: [0xea209000-0xea2097ff] [ 0.655630] pci 0000:05:00.2: reg 14 32bit mmio: [0xea200000-0xea203fff] [ 0.655668] pci 0000:05:00.2: supports D1 D2 [ 0.655669] pci 0000:05:00.2: PME# supported from D0 D1 D2 D3hot [ 0.655673] pci 0000:05:00.2: PME# disabled [ 0.655715] pci 0000:05:06.0: reg 10 32bit mmio: [0xea208000-0xea2087ff] [ 0.655721] pci 0000:05:06.0: reg 14 32bit mmio: [0xea204000-0xea207fff] [ 0.655758] pci 0000:05:06.0: supports D1 D2 [ 0.655760] pci 0000:05:06.0: PME# supported from D0 D1 D2 D3hot [ 0.655763] pci 0000:05:06.0: PME# disabled [ 0.655791] pci 0000:05:07.0: reg 10 io port: [0xd200-0xd207] [ 0.655797] pci 0000:05:07.0: reg 14 io port: [0xd300-0xd303] [ 0.655802] pci 0000:05:07.0: reg 18 io port: [0xd400-0xd407] [ 0.655808] pci 0000:05:07.0: reg 1c io port: [0xd500-0xd503] [ 0.655813] pci 0000:05:07.0: reg 20 io port: [0xd600-0xd60f] [ 0.655868] pci 0000:00:1e.0: transparent bridge [ 0.655871] pci 0000:00:1e.0: bridge io port: [0xd000-0xdfff] [ 0.655874] pci 0000:00:1e.0: bridge 32bit mmio: [0xea200000-0xea2fffff] [ 0.655895] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.656002] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT] [ 0.656049] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX4._PRT] [ 0.656087] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX5._PRT] [ 0.656125] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT] [ 0.669440] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 6 7 9 10 11 12 14 15) [ 0.669516] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 *10 11 12 14 15) [ 0.669590] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *9 10 11 12 14 15) [ 0.669665] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11 12 14 15) [ 0.669739] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 *7 9 10 11 12 14 15) [ 0.669816] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 *10 11 12 14 15) [ 0.669890] ACPI: PCI Interrupt Link [LNK0] (IRQs *3 4 5 6 7 9 10 11 12 14 15) [ 0.669964] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 9 10 *11 12 14 15) [ 0.670065] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none [ 0.670070] vgaarb: loaded [ 0.670152] SCSI subsystem initialized [ 0.670184] libata version 3.00 loaded. [ 0.670184] usbcore: registered new interface driver usbfs [ 0.670184] usbcore: registered new interface driver hub [ 0.670184] usbcore: registered new device driver usb [ 0.670184] ACPI: WMI: Mapper loaded [ 0.670184] PCI: Using ACPI for IRQ routing [ 0.670184] NetLabel: Initializing [ 0.670184] NetLabel: domain hash size = 128 [ 0.670184] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.670192] NetLabel: unlabeled traffic allowed by default [ 0.670219] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0 [ 0.670223] hpet0: 4 comparators, 64-bit 14.318180 MHz counter [ 0.690164] Switching to clocksource tsc [ 0.691539] AppArmor: AppArmor Filesystem Enabled [ 0.691546] pnp: PnP ACPI init [ 0.691552] ACPI: bus type pnp registered [ 0.693290] pnp: PnP ACPI: found 13 devices [ 0.693292] ACPI: ACPI bus type pnp unregistered [ 0.693299] system 00:01: ioport range 0x4d0-0x4d1 has been reserved [ 0.693301] system 00:01: ioport range 0x290-0x29f has been reserved [ 0.693304] system 00:01: ioport range 0x800-0x805 has been reserved [ 0.693306] system 00:01: ioport range 0x290-0x294 has been reserved [ 0.693308] system 00:01: ioport range 0x880-0x88f has been reserved [ 0.693313] system 00:09: ioport range 0x400-0x4bf could not be reserved [ 0.693317] system 00:0a: iomem range 0xe0000000-0xe3ffffff has been reserved [ 0.693321] system 00:0b: iomem range 0xcce00-0xcffff has been reserved [ 0.693324] system 00:0b: iomem range 0xf0000-0xf7fff could not be reserved [ 0.693326] system 00:0b: iomem range 0xf8000-0xfbfff could not be reserved [ 0.693328] system 00:0b: iomem range 0xfc000-0xfffff could not be reserved [ 0.693330] system 00:0b: iomem range 0xcfeb0000-0xcfefffff could not be reserved [ 0.693332] system 00:0b: iomem range 0x0-0x9ffff could not be reserved [ 0.693334] system 00:0b: iomem range 0x100000-0xcfeaffff could not be reserved [ 0.693337] system 00:0b: iomem range 0xfec00000-0xfec00fff could not be reserved [ 0.693339] system 00:0b: iomem range 0xfed10000-0xfed1dfff has been reserved [ 0.693341] system 00:0b: iomem range 0xfed20000-0xfed8ffff has been reserved [ 0.693344] system 00:0b: iomem range 0xfee00000-0xfee00fff has been reserved [ 0.693346] system 00:0b: iomem range 0xffb00000-0xffb7ffff has been reserved [ 0.693350] system 00:0b: iomem range 0xfff00000-0xffffffff has been reserved [ 0.693352] system 00:0b: iomem range 0xe0000-0xeffff has been reserved [ 0.698029] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01 [ 0.698031] pci 0000:00:01.0: IO window: 0xa000-0xafff [ 0.698034] pci 0000:00:01.0: MEM window: 0xe4000000-0xe7ffffff [ 0.698037] pci 0000:00:01.0: PREFETCH window: 0x000000d0000000-0x000000dfffffff [ 0.698040] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:02 [ 0.698042] pci 0000:00:1c.0: IO window: 0x1000-0x1fff [ 0.698046] pci 0000:00:1c.0: MEM window: 0xea400000-0xea5fffff [ 0.698049] pci 0000:00:1c.0: PREFETCH window: 0x000000ea600000-0x000000ea7fffff [ 0.698054] pci 0000:00:1c.4: PCI bridge, secondary bus 0000:03 [ 0.698056] pci 0000:00:1c.4: IO window: 0xb000-0xbfff [ 0.698060] pci 0000:00:1c.4: MEM window: 0xe8000000-0xe8ffffff [ 0.698063] pci 0000:00:1c.4: PREFETCH window: 0x000000ea000000-0x000000ea0fffff [ 0.698068] pci 0000:00:1c.5: PCI bridge, secondary bus 0000:04 [ 0.698071] pci 0000:00:1c.5: IO window: 0xc000-0xcfff [ 0.698074] pci 0000:00:1c.5: MEM window: 0xe9000000-0xe9ffffff [ 0.698077] pci 0000:00:1c.5: PREFETCH window: 0x000000ea100000-0x000000ea1fffff [ 0.698083] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:05 [ 0.698085] pci 0000:00:1e.0: IO window: 0xd000-0xdfff [ 0.698089] pci 0000:00:1e.0: MEM window: 0xea200000-0xea2fffff [ 0.698092] pci 0000:00:1e.0: PREFETCH window: disabled [ 0.698100] alloc irq_desc for 16 on node -1 [ 0.698101] alloc kstat_irqs on node -1 [ 0.698105] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.698108] pci 0000:00:01.0: setting latency timer to 64 [ 0.698114] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.698117] pci 0000:00:1c.0: setting latency timer to 64 [ 0.698123] pci 0000:00:1c.4: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.698126] pci 0000:00:1c.4: setting latency timer to 64 [ 0.698132] alloc irq_desc for 17 on node -1 [ 0.698133] alloc kstat_irqs on node -1 [ 0.698135] pci 0000:00:1c.5: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 0.698138] pci 0000:00:1c.5: setting latency timer to 64 [ 0.698143] pci 0000:00:1e.0: setting latency timer to 64 [ 0.698146] pci_bus 0000:00: resource 0 io: [0x00-0xffff] [ 0.698148] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff] [ 0.698150] pci_bus 0000:01: resource 0 io: [0xa000-0xafff] [ 0.698152] pci_bus 0000:01: resource 1 mem: [0xe4000000-0xe7ffffff] [ 0.698154] pci_bus 0000:01: resource 2 pref mem [0xd0000000-0xdfffffff] [ 0.698156] pci_bus 0000:02: resource 0 io: [0x1000-0x1fff] [ 0.698157] pci_bus 0000:02: resource 1 mem: [0xea400000-0xea5fffff] [ 0.698159] pci_bus 0000:02: resource 2 pref mem [0xea600000-0xea7fffff] [ 0.698161] pci_bus 0000:03: resource 0 io: [0xb000-0xbfff] [ 0.698163] pci_bus 0000:03: resource 1 mem: [0xe8000000-0xe8ffffff] [ 0.698164] pci_bus 0000:03: resource 2 pref mem [0xea000000-0xea0fffff] [ 0.698166] pci_bus 0000:04: resource 0 io: [0xc000-0xcfff] [ 0.698168] pci_bus 0000:04: resource 1 mem: [0xe9000000-0xe9ffffff] [ 0.698170] pci_bus 0000:04: resource 2 pref mem [0xea100000-0xea1fffff] [ 0.698172] pci_bus 0000:05: resource 0 io: [0xd000-0xdfff] [ 0.698173] pci_bus 0000:05: resource 1 mem: [0xea200000-0xea2fffff] [ 0.698175] pci_bus 0000:05: resource 3 io: [0x00-0xffff] [ 0.698177] pci_bus 0000:05: resource 4 mem: [0x000000-0xffffffffffffffff] [ 0.698201] NET: Registered protocol family 2 [ 0.698388] IP route cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.699330] TCP established hash table entries: 524288 (order: 11, 8388608 bytes) [ 0.701847] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.702221] TCP: Hash tables configured (established 524288 bind 65536) [ 0.702223] TCP reno registered [ 0.702320] NET: Registered protocol family 1 [ 0.702461] pci 0000:01:00.0: Boot video device [ 0.702744] Scanning for low memory corruption every 60 seconds [ 0.702861] audit: initializing netlink socket (disabled) [ 0.702869] type=2000 audit(1271410995.699:1): initialized [ 0.710508] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.711637] VFS: Disk quotas dquot_6.5.2 [ 0.711679] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.712168] fuse init (API version 7.13) [ 0.712232] msgmni has been set to 15973 [ 0.712502] alg: No test for stdrng (krng) [ 0.712559] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 0.712562] io scheduler noop registered [ 0.712563] io scheduler anticipatory registered [ 0.712565] io scheduler deadline registered [ 0.712593] io scheduler cfq registered (default) [ 0.712697] alloc irq_desc for 24 on node -1 [ 0.712699] alloc kstat_irqs on node -1 [ 0.712705] pcieport 0000:00:01.0: irq 24 for MSI/MSI-X [ 0.712710] pcieport 0000:00:01.0: setting latency timer to 64 [ 0.712787] alloc irq_desc for 25 on node -1 [ 0.712789] alloc kstat_irqs on node -1 [ 0.712794] pcieport 0000:00:1c.0: irq 25 for MSI/MSI-X [ 0.712800] pcieport 0000:00:1c.0: setting latency timer to 64 [ 0.712889] alloc irq_desc for 26 on node -1 [ 0.712890] alloc kstat_irqs on node -1 [ 0.712896] pcieport 0000:00:1c.4: irq 26 for MSI/MSI-X [ 0.712902] pcieport 0000:00:1c.4: setting latency timer to 64 [ 0.712993] alloc irq_desc for 27 on node -1 [ 0.712995] alloc kstat_irqs on node -1 [ 0.713000] pcieport 0000:00:1c.5: irq 27 for MSI/MSI-X [ 0.713006] pcieport 0000:00:1c.5: setting latency timer to 64 [ 0.713074] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.713148] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 0.713227] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 [ 0.713230] ACPI: Power Button [PWRB] [ 0.713272] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 0.713274] ACPI: Power Button [PWRF] [ 0.713659] ACPI: SSDT 00000000cfee6ec0 0022A (v01 PmRef Cpu0Ist 00003000 INTL 20040311) [ 0.713775] Marking TSC unstable due to TSC halts in idle [ 0.713810] Switching to clocksource hpet [ 0.713863] processor LNXCPU:00: registered as cooling_device0 [ 0.714141] ACPI: SSDT 00000000cfee7380 00152 (v01 PmRef Cpu1Ist 00003000 INTL 20040311) [ 0.714340] processor LNXCPU:01: registered as cooling_device1 [ 0.714568] ACPI: SSDT 00000000cfee74e0 00152 (v01 PmRef Cpu2Ist 00003000 INTL 20040311) [ 0.714742] processor LNXCPU:02: registered as cooling_device2 [ 0.714928] ACPI: SSDT 00000000cfee7640 00152 (v01 PmRef Cpu3Ist 00003000 INTL 20040311) [ 0.715228] processor LNXCPU:03: registered as cooling_device3 [ 0.723990] Linux agpgart interface v0.103 [ 0.724015] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.724105] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 0.724375] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 0.725174] brd: module loaded [ 0.725546] loop: module loaded [ 0.725604] input: Macintosh mouse button emulation as /devices/virtual/input/input2 [ 0.725662] ata_piix 0000:00:1f.2: version 2.13 [ 0.725673] alloc irq_desc for 19 on node -1 [ 0.725674] alloc kstat_irqs on node -1 [ 0.725678] ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 0.725681] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ] [ 0.725715] ata_piix 0000:00:1f.2: setting latency timer to 64 [ 0.725776] scsi0 : ata_piix [ 0.725849] scsi1 : ata_piix [ 0.726424] ata1: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000 irq 14 [ 0.726429] ata2: SATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xf008 irq 15 [ 0.726445] ata_piix 0000:00:1f.5: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 0.726449] ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ] [ 0.726476] ata_piix 0000:00:1f.5: setting latency timer to 64 [ 0.726535] scsi2 : ata_piix [ 0.726587] scsi3 : ata_piix [ 0.727059] ata3: SATA max UDMA/133 cmd 0xe700 ctl 0xe800 bmdma 0xeb00 irq 19 [ 0.727062] ata4: SATA max UDMA/133 cmd 0xe900 ctl 0xea00 bmdma 0xeb08 irq 19 [ 0.727131] pata_acpi 0000:05:07.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19 [ 0.727150] pata_acpi 0000:05:07.0: setting latency timer to 64 [ 0.727159] pata_acpi 0000:05:07.0: PCI INT A disabled [ 0.727391] Fixed MDIO Bus: probed [ 0.727414] PPP generic driver version 2.4.2 [ 0.727440] tun: Universal TUN/TAP device driver, 1.6 [ 0.727441] tun: (C) 1999-2004 Max Krasnyansky [ 0.727499] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.727511] alloc irq_desc for 18 on node -1 [ 0.727513] alloc kstat_irqs on node -1 [ 0.727516] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 0.727528] ehci_hcd 0000:00:1a.7: setting latency timer to 64 [ 0.727531] ehci_hcd 0000:00:1a.7: EHCI Host Controller [ 0.727556] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1 [ 0.731464] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported [ 0.731473] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xea305000 [ 0.760019] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00 [ 0.760081] usb usb1: configuration #1 chosen from 1 choice [ 0.760101] hub 1-0:1.0: USB hub found [ 0.760106] hub 1-0:1.0: 6 ports detected [ 0.760152] alloc irq_desc for 23 on node -1 [ 0.760154] alloc kstat_irqs on node -1 [ 0.760157] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 0.760165] ehci_hcd 0000:00:1d.7: setting latency timer to 64 [ 0.760167] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 0.760190] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2 [ 0.764088] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported [ 0.764097] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xea304000 [ 0.790017] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 0.790072] usb usb2: configuration #1 chosen from 1 choice [ 0.790093] hub 2-0:1.0: USB hub found [ 0.790097] hub 2-0:1.0: 6 ports detected [ 0.790140] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.790150] uhci_hcd: USB Universal Host Controller Interface driver [ 0.790163] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.790168] uhci_hcd 0000:00:1a.0: setting latency timer to 64 [ 0.790170] uhci_hcd 0000:00:1a.0: UHCI Host Controller [ 0.790192] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3 [ 0.790218] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000e000 [ 0.790281] usb usb3: configuration #1 chosen from 1 choice [ 0.790300] hub 3-0:1.0: USB hub found [ 0.790308] hub 3-0:1.0: 2 ports detected [ 0.790342] alloc irq_desc for 21 on node -1 [ 0.790343] alloc kstat_irqs on node -1 [ 0.790346] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 [ 0.790351] uhci_hcd 0000:00:1a.1: setting latency timer to 64 [ 0.790353] uhci_hcd 0000:00:1a.1: UHCI Host Controller [ 0.790375] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4 [ 0.790401] uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000e100 [ 0.790465] usb usb4: configuration #1 chosen from 1 choice [ 0.790484] hub 4-0:1.0: USB hub found [ 0.790488] hub 4-0:1.0: 2 ports detected [ 0.790522] uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 0.790528] uhci_hcd 0000:00:1a.2: setting latency timer to 64 [ 0.790530] uhci_hcd 0000:00:1a.2: UHCI Host Controller [ 0.790552] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5 [ 0.790571] uhci_hcd 0000:00:1a.2: irq 18, io base 0x0000e500 [ 0.790637] usb usb5: configuration #1 chosen from 1 choice [ 0.790655] hub 5-0:1.0: USB hub found [ 0.790659] hub 5-0:1.0: 2 ports detected [ 0.790691] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 0.790695] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [ 0.790698] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 0.790724] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6 [ 0.790743] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000e200 [ 0.790803] usb usb6: configuration #1 chosen from 1 choice [ 0.790823] hub 6-0:1.0: USB hub found [ 0.790827] hub 6-0:1.0: 2 ports detected [ 0.790859] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 0.790863] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [ 0.790866] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 0.790896] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7 [ 0.790916] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000e300 [ 0.790976] usb usb7: configuration #1 chosen from 1 choice [ 0.790996] hub 7-0:1.0: USB hub found [ 0.791002] hub 7-0:1.0: 2 ports detected [ 0.791033] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 0.791037] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [ 0.791040] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 0.791066] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8 [ 0.791085] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000e400 [ 0.791150] usb usb8: configuration #1 chosen from 1 choice [ 0.791168] hub 8-0:1.0: USB hub found [ 0.791172] hub 8-0:1.0: 2 ports detected [ 0.791239] PNP: No PS/2 controller found. Probing ports directly. [ 0.791575] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.791580] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 0.791660] mice: PS/2 mouse device common for all mice [ 0.791734] rtc_cmos 00:04: RTC can wake from S4 [ 0.791761] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0 [ 0.791781] rtc0: alarms up to one month, 242 bytes nvram, hpet irqs [ 0.791869] device-mapper: uevent: version 1.0.3 [ 0.791951] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com [ 0.792085] device-mapper: multipath: version 1.1.0 loaded [ 0.792087] device-mapper: multipath round-robin: version 1.0.0 loaded [ 0.792385] cpuidle: using governor ladder [ 0.792466] cpuidle: using governor menu [ 0.792707] TCP cubic registered [ 0.792800] NET: Registered protocol family 10 [ 0.793128] lo: Disabled Privacy Extensions [ 0.793332] NET: Registered protocol family 17 [ 0.798583] PM: Resume from disk failed. [ 0.798598] registered taskstats version 1 [ 0.798997] Magic number: 6:825:727 [ 0.799010] block loop7: hash matches [ 0.799077] rtc_cmos 00:04: setting system clock to 2010-04-16 09:43:16 UTC (1271410996) [ 0.799079] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 0.799080] EDD information not available. [ 0.888789] Freeing initrd memory: 14386k freed [ 1.071265] usb 1-2: new high speed USB device using ehci_hcd and address 2 [ 1.220474] usb 1-2: configuration #1 chosen from 1 choice [ 1.220557] hub 1-2:1.0: USB hub found [ 1.220661] hub 1-2:1.0: 7 ports detected [ 1.240053] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1.250048] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1.260300] ata4.00: ATA-7: SAMSUNG HD642JJ, 1AA01112, max UDMA7 [ 1.260303] ata4.00: 1250263728 sectors, multi 16: LBA48 NCQ (depth 0/32) [ 1.270215] ata3.00: ATAPI: LITE-ON DVDRW LH-20A1L, BL05, max UDMA/100 [ 1.290432] ata4.00: configured for UDMA/133 [ 1.310210] ata3.00: configured for UDMA/100 [ 1.460015] usb 1-6: new high speed USB device using ehci_hcd and address 4 [ 1.591307] ata2.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1.591319] ata2.01: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1.600062] ata1.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1.600074] ata1.01: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1.620706] usb 1-6: configuration #1 chosen from 1 choice [ 1.620822] hub 1-6:1.0: USB hub found [ 1.620907] hub 1-6:1.0: 2 ports detected [ 1.631544] ata2.00: ATA-7: SAMSUNG HD642JJ, 1AA01112, max UDMA7 [ 1.631547] ata2.00: 1250263728 sectors, multi 16: LBA48 NCQ (depth 0/32) [ 1.631689] ata2.01: ATA-7: SAMSUNG HD642JJ, 1AA01112, max UDMA7 [ 1.631692] ata2.01: 1250263728 sectors, multi 16: LBA48 NCQ (depth 0/32) [ 1.650187] ata1.00: ATA-8: WDC WD5000AAKS-65YGA0, 12.01C02, max UDMA/133 [ 1.650189] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32) [ 1.651551] ata2.00: configured for UDMA/133 [ 1.670322] ata1.01: HPA unlocked: 1250261615 -> 1250263728, native 1250263728 [ 1.670325] ata1.01: ATA-7: SAMSUNG HD642JJ, 1AA01112, max UDMA7 [ 1.670327] ata1.01: 1250263728 sectors, multi 16: LBA48 NCQ (depth 0/32) [ 1.670447] ata2.01: configured for UDMA/133 [ 1.710194] ata1.00: configured for UDMA/133 [ 1.730304] ata1.01: configured for UDMA/133 [ 1.730413] scsi 0:0:0:0: Direct-Access ATA WDC WD5000AAKS-6 12.0 PQ: 0 ANSI: 5 [ 1.730550] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB) [ 1.730578] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 1.730587] sd 0:0:0:0: [sda] Write Protect is off [ 1.730589] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.730607] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.730652] scsi 0:0:1:0: Direct-Access ATA SAMSUNG HD642JJ 1AA0 PQ: 0 ANSI: 5 [ 1.730729] sda: [ 1.730745] sd 0:0:1:0: Attached scsi generic sg1 type 0 [ 1.730881] scsi 1:0:0:0: Direct-Access ATA SAMSUNG HD642JJ 1AA0 PQ: 0 ANSI: 5 [ 1.730973] sd 1:0:0:0: [sdc] 1250263728 512-byte logical blocks: (640 GB/596 GiB) [ 1.730982] sd 1:0:0:0: Attached scsi generic sg2 type 0 [ 1.731010] sd 1:0:0:0: [sdc] Write Protect is off [ 1.731012] sd 1:0:0:0: [sdc] Mode Sense: 00 3a 00 00 [ 1.731051] sd 1:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.731068] scsi 1:0:1:0: Direct-Access ATA SAMSUNG HD642JJ 1AA0 PQ: 0 ANSI: 5 [ 1.731155] sd 1:0:1:0: Attached scsi generic sg3 type 0 [ 1.731166] sdc: [ 1.732357] scsi 2:0:0:0: CD-ROM LITE-ON DVDRW LH-20A1L BL05 PQ: 0 ANSI: 5 [ 1.733367] sdc1 [ 1.733381] sd 1:0:1:0: [sdd] 1250263728 512-byte logical blocks: (640 GB/596 GiB) [ 1.733417] sd 1:0:1:0: [sdd] Write Protect is off [ 1.733419] sd 1:0:1:0: [sdd] Mode Sense: 00 3a 00 00 [ 1.733438] sd 1:0:1:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.733596] sd 1:0:0:0: [sdc] Attached SCSI disk [ 1.733613] sdd:sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray [ 1.737896] Uniform CD-ROM driver Revision: 3.20 [ 1.737974] sr 2:0:0:0: Attached scsi CD-ROM sr0 [ 1.738021] sr 2:0:0:0: Attached scsi generic sg4 type 5 [ 1.738105] scsi 3:0:0:0: Direct-Access ATA SAMSUNG HD642JJ 1AA0 PQ: 0 ANSI: 5 [ 1.738190] sd 3:0:0:0: [sde] 1250263728 512-byte logical blocks: (640 GB/596 GiB) [ 1.738204] sd 3:0:0:0: Attached scsi generic sg5 type 0 [ 1.738226] sd 3:0:0:0: [sde] Write Protect is off [ 1.738228] sd 3:0:0:0: [sde] Mode Sense: 00 3a 00 00 [ 1.738255] sd 3:0:0:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.738347] sde: sdd1 [ 1.738922] sd 1:0:1:0: [sdd] Attached SCSI disk [ 1.744380] sde1 [ 1.744542] sd 3:0:0:0: [sde] Attached SCSI disk [ 1.764279] sda1 sda2 < [ 1.764304] sd 0:0:1:0: [sdb] 1250263728 512-byte logical blocks: (640 GB/596 GiB) [ 1.794016] sda5 > [ 1.794048] sd 0:0:1:0: [sdb] Write Protect is off [ 1.794051] sd 0:0:1:0: [sdb] Mode Sense: 00 3a 00 00 [ 1.794074] sd 0:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.794200] sdb: sdb1 [ 1.797601] sd 0:0:0:0: [sda] Attached SCSI disk [ 1.797729] sd 0:0:1:0: [sdb] Attached SCSI disk [ 1.797759] Freeing unused kernel memory: 876k freed [ 1.797892] Write protecting the kernel read-only data: 7680k [ 1.811332] udev: starting version 151 [ 1.851854] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 1.851873] r8169 0000:03:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 1.851918] r8169 0000:03:00.0: setting latency timer to 64 [ 1.851957] alloc irq_desc for 28 on node -1 [ 1.851959] alloc kstat_irqs on node -1 [ 1.851970] r8169 0000:03:00.0: irq 28 for MSI/MSI-X [ 1.852404] eth0: RTL8168c/8111c at 0xffffc900057a2000, 00:1f:d0:20:a6:04, XID 1c4000c0 IRQ 28 [ 1.856330] pata_it8213 0000:05:07.0: version 0.0.3 [ 1.856340] pata_it8213 0000:05:07.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19 [ 1.857306] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 1.857318] r8169 0000:04:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 1.857353] r8169 0000:04:00.0: setting latency timer to 64 [ 1.857392] alloc irq_desc for 29 on node -1 [ 1.857393] alloc kstat_irqs on node -1 [ 1.857404] r8169 0000:04:00.0: irq 29 for MSI/MSI-X [ 1.857847] eth1: RTL8168c/8111c at 0xffffc90000c7e000, 00:1f:d0:20:a6:06, XID 1c4000c0 IRQ 29 [ 1.858388] scsi4 : pata_it8213 [ 1.858463] scsi5 : pata_it8213 [ 1.858491] ata5: PATA max UDMA/66 cmd 0xd200 ctl 0xd300 bmdma 0xd600 irq 19 [ 1.858493] ata6: DUMMY [ 1.860631] vga16fb: initializing [ 1.860634] vga16fb: mapped to 0xffff8800000a0000 [ 1.860667] ohci1394 0000:05:00.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 1.860683] fb0: VGA16 VGA frame buffer device [ 1.861761] Floppy drive(s): fd0 is 1.44M [ 1.893784] FDC 0 is a post-1991 82077 [ 1.910018] usb 4-2: new full speed USB device using uhci_hcd and address 2 [ 1.913786] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[19] MMIO=[ea209000-ea2097ff] Max Packet=[2048] IR/IT contexts=[4/8] [ 1.913857] ohci1394 0000:05:06.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 1.971289] ohci1394: fw-host1: OHCI-1394 1.1 (PCI): IRQ=[18] MMIO=[ea208000-ea2087ff] Max Packet=[2048] IR/IT contexts=[4/8] [ 2.172196] Console: switching to colour frame buffer device 80x30 [ 2.238513] usb 4-2: configuration #1 chosen from 1 choice [ 2.330169] usb 1-2.1: new high speed USB device using ehci_hcd and address 5 [ 2.568371] usb 1-2.1: configuration #1 chosen from 1 choice [ 2.800169] usb 1-2.4: new full speed USB device using ehci_hcd and address 6 [ 2.913352] usb 1-2.4: configuration #1 chosen from 1 choice [ 2.913569] hub 1-2.4:1.0: USB hub found [ 2.913666] hub 1-2.4:1.0: 3 ports detected [ 3.000160] usb 1-2.5: new high speed USB device using ehci_hcd and address 7 [ 3.122108] usb 1-2.5: configuration #1 chosen from 1 choice [ 3.126914] Initializing USB Mass Storage driver... [ 3.127070] scsi6 : SCSI emulation for USB Mass Storage devices [ 3.127185] usbcore: registered new interface driver usb-storage [ 3.127187] USB Mass Storage support registered. [ 3.127236] usb-storage: device found at 7 [ 3.127237] usb-storage: waiting for device to settle before scanning [ 3.210168] usb 1-2.6: new full speed USB device using ehci_hcd and address 8 [ 3.241481] ieee1394: Host added: ID:BUS[0-00:1023] GUID[00023c0091079d39] [ 3.300157] ieee1394: Host added: ID:BUS[1-00:1023] GUID[0029605c00001fd0] [ 3.320839] usb 1-2.6: configuration #1 chosen from 1 choice [ 3.401413] usb 1-2.7: new low speed USB device using ehci_hcd and address 9 [ 3.525972] usb 1-2.7: configuration #1 chosen from 1 choice [ 3.533343] usbcore: registered new interface driver hiddev [ 3.536270] input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:1a.7/usb1/1-2/1-2.7/1-2.7:1.0/input/input3 [ 3.536338] generic-usb 0003:046D:C046.0001: input,hidraw0: USB HID v1.10 Mouse [Logitech USB Optical Mouse] on usb-0000:00:1a.7-2.7/input0 [ 3.536359] usbcore: registered new interface driver usbhid [ 3.536362] usbhid: v2.6:USB HID core driver [ 3.620165] usb 1-6.2: new full speed USB device using ehci_hcd and address 10 [ 3.734469] usb 1-6.2: configuration #1 chosen from 1 choice [ 3.737260] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1a.7/usb1/1-6/1-6.2/1-6.2:1.0/input/input4 [ 3.737328] generic-usb 0003:046D:C525.0002: input,hidraw1: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:1a.7-6.2/input0 [ 3.739631] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1a.7/usb1/1-6/1-6.2/1-6.2:1.1/input/input5 [ 3.739804] generic-usb 0003:046D:C525.0003: input,hiddev96,hidraw2: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:1a.7-6.2/input1 [ 3.811413] usb 1-2.4.2: new full speed USB device using ehci_hcd and address 11 [ 3.928346] usb 1-2.4.2: configuration #1 chosen from 1 choice [ 3.932261] input: Logitech Logitech BT Mini-Receiver as /devices/pci0000:00/0000:00:1a.7/usb1/1-2/1-2.4/1-2.4.2/1-2.4.2:1.0/input/input6 [ 3.932337] generic-usb 0003:046D:C713.0004: input,hidraw3: USB HID v1.11 Keyboard [Logitech Logitech BT Mini-Receiver] on usb-0000:00:1a.7-2.4.2/input0 [ 4.021409] usb 1-2.4.3: new full speed USB device using ehci_hcd and address 12 [ 4.148345] usb 1-2.4.3: configuration #1 chosen from 1 choice [ 4.160017] input: Logitech Logitech BT Mini-Receiver as /devices/pci0000:00/0000:00:1a.7/usb1/1-2/1-2.4/1-2.4.3/1-2.4.3:1.0/input/input7 [ 4.160199] logitech 0003:046D:C714.0005: input,hiddev97,hidraw4: USB HID v1.11 Mouse [Logitech Logitech BT Mini-Receiver] on usb-0000:00:1a.7-2.4.3/input0 [ 8.120609] usb-storage: device scan complete [ 8.121199] scsi 6:0:0:0: Direct-Access Generic USB SD Reader 1.00 PQ: 0 ANSI: 0 [ 8.121830] scsi 6:0:0:1: Direct-Access Generic USB CF Reader 1.01 PQ: 0 ANSI: 0 [ 8.122432] scsi 6:0:0:2: Direct-Access Generic USB SM Reader 1.02 PQ: 0 ANSI: 0 [ 8.123065] scsi 6:0:0:3: Direct-Access Generic USB MS Reader 1.03 PQ: 0 ANSI: 0 [ 8.123818] scsi 6:0:0:4: Direct-Access Generic Mini SD Reader 1.06 PQ: 0 ANSI: 0 [ 8.124402] sd 6:0:0:0: Attached scsi generic sg6 type 0 [ 8.124538] sd 6:0:0:1: Attached scsi generic sg7 type 0 [ 8.124686] sd 6:0:0:2: Attached scsi generic sg8 type 0 [ 8.124793] sd 6:0:0:3: Attached scsi generic sg9 type 0 [ 8.124899] sd 6:0:0:4: Attached scsi generic sg10 type 0 [ 8.128747] sd 6:0:0:0: [sdf] Attached SCSI removable disk [ 8.129424] sd 6:0:0:2: [sdh] Attached SCSI removable disk [ 8.130047] sd 6:0:0:3: [sdi] Attached SCSI removable disk [ 8.130672] sd 6:0:0:4: [sdj] Attached SCSI removable disk [ 8.137836] sd 6:0:0:1: [sdg] Attached SCSI removable disk [ 29.140888] Intel AES-NI instructions are not detected. [ 29.961489] EXT4-fs (dm-1): INFO: recovery required on readonly filesystem [ 29.961493] EXT4-fs (dm-1): write access will be enabled during recovery [ 32.493086] EXT4-fs (dm-1): recovery complete [ 32.493628] EXT4-fs (dm-1): mounted filesystem with ordered data mode [ 36.476342] Adding 19795960k swap on /dev/mapper/mweinelt--desktop-swap_1. Priority:-1 extents:1 across:19795960k [ 37.018308] udev: starting version 151 [ 37.720188] usb 1-2.4.1: new full speed USB device using ehci_hcd and address 13 [ 37.845397] usb 1-2.4.1: configuration #1 chosen from 1 choice [ 38.988124] Bluetooth: Core ver 2.15 [ 38.988191] NET: Registered protocol family 31 [ 38.988192] Bluetooth: HCI device and connection manager initialized [ 38.988195] Bluetooth: HCI socket layer initialized [ 39.058350] Bluetooth: Generic Bluetooth USB driver ver 0.6 [ 39.058514] usbcore: registered new interface driver btusb [ 39.071922] Linux video capture interface: v2.00 [ 39.129771] lp: driver loaded but no devices found [ 39.262394] uvcvideo: Found UVC 1.00 device (046d:0991) [ 39.293453] input: UVC Camera (046d:0991) as /devices/pci0000:00/0000:00:1a.7/usb1/1-2/1-2.1/1-2.1:1.0/input/input8 [ 39.293528] usbcore: registered new interface driver uvcvideo [ 39.293556] USB Video Class driver (v0.1.0) [ 39.383985] usbcore: registered new interface driver usbserial [ 39.384061] USB Serial support registered for generic [ 39.384144] usbcore: registered new interface driver usbserial_generic [ 39.384146] usbserial: USB Serial Driver core [ 39.408666] USB Serial support registered for pl2303 [ 39.408682] pl2303 1-2.6:1.0: pl2303 converter detected [ 39.410182] usb 1-2.6: pl2303 converter now attached to ttyUSB0 [ 39.410218] usbcore: registered new interface driver pl2303 [ 39.410220] pl2303: Prolific PL2303 USB to serial adaptor driver [ 42.413920] nvidia: module license 'NVIDIA' taints kernel. [ 42.413924] Disabling lock debugging due to kernel taint [ 42.754689] gameport: EMU10K1 is pci0000:05:00.1/gameport0, io 0xd100, speed 1041kHz [ 42.967613] nvidia 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 42.967619] nvidia 0000:01:00.0: setting latency timer to 64 [ 42.967623] vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem [ 42.967810] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 195.36.15 Fri Mar 12 00:29:13 PST 2010 [ 43.052071] alloc irq_desc for 22 on node -1 [ 43.052074] alloc kstat_irqs on node -1 [ 43.052079] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 [ 43.052120] HDA Intel 0000:00:1b.0: setting latency timer to 64 [ 43.143560] alloc irq_desc for 20 on node -1 [ 43.143562] alloc kstat_irqs on node -1 [ 43.143567] EMU10K1_Audigy 0000:05:00.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 [ 43.147282] Installing spdif_bug patch: SB Audigy 2 Platinum [SB0240P] [ 43.244241] hda_codec: ALC889A: BIOS auto-probing. [ 43.245630] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input9 [ 43.533066] usbcore: registered new interface driver snd-usb-audio