[    0.000000] Linux version 2.6.31-14-generic (buildd@crested) (gcc version 4.4.1 (Ubuntu 4.4.1-4ubuntu8) ) #48-Ubuntu SMP Fri Oct 16 14:05:01 UTC 2009 (Ubuntu 2.6.31-14.48-generic)
[    0.000000] Command line: root=UUID=4dfb0c0c-137d-4d0d-a4a6-b41bd8dfa5e6 ro ahci.marvell_enable=1 quiet splash 
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   Centaur CentaurHauls
[    0.000000] BIOS-provided physical RAM map:
[    0.000000]  BIOS-e820: 0000000000000000 - 000000000009dc00 (usable)
[    0.000000]  BIOS-e820: 000000000009dc00 - 00000000000a0000 (reserved)
[    0.000000]  BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
[    0.000000]  BIOS-e820: 0000000000100000 - 00000000bffb0000 (usable)
[    0.000000]  BIOS-e820: 00000000bffb0000 - 00000000bffbe000 (ACPI data)
[    0.000000]  BIOS-e820: 00000000bffbe000 - 00000000bffe0000 (ACPI NVS)
[    0.000000]  BIOS-e820: 00000000bffe0000 - 00000000c0000000 (reserved)
[    0.000000]  BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[    0.000000]  BIOS-e820: 00000000fecc0000 - 00000000fecc1000 (reserved)
[    0.000000]  BIOS-e820: 00000000ff780000 - 0000000100000000 (reserved)
[    0.000000] DMI present.
[    0.000000] AMI BIOS detected: BIOS may corrupt low RAM, working around it.
[    0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[    0.000000] last_pfn = 0xbffb0 max_arch_pfn = 0x400000000
[    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[    0.000000] Scanning 0 areas for low memory corruption
[    0.000000] modified physical RAM map:
[    0.000000]  modified: 0000000000000000 - 0000000000010000 (reserved)
[    0.000000]  modified: 0000000000010000 - 000000000009dc00 (usable)
[    0.000000]  modified: 000000000009dc00 - 00000000000a0000 (reserved)
[    0.000000]  modified: 00000000000e4000 - 0000000000100000 (reserved)
[    0.000000]  modified: 0000000000100000 - 00000000bffb0000 (usable)
[    0.000000]  modified: 00000000bffb0000 - 00000000bffbe000 (ACPI data)
[    0.000000]  modified: 00000000bffbe000 - 00000000bffe0000 (ACPI NVS)
[    0.000000]  modified: 00000000bffe0000 - 00000000c0000000 (reserved)
[    0.000000]  modified: 00000000fec00000 - 00000000fec01000 (reserved)
[    0.000000]  modified: 00000000fecc0000 - 00000000fecc1000 (reserved)
[    0.000000]  modified: 00000000ff780000 - 0000000100000000 (reserved)
[    0.000000] initial memory mapped : 0 - 20000000
[    0.000000] init_memory_mapping: 0000000000000000-00000000bffb0000
[    0.000000] Using x86 segment limits to approximate NX protection
[    0.000000]  0000000000 - 00bfe00000 page 2M
[    0.000000]  00bfe00000 - 00bffb0000 page 4k
[    0.000000] kernel direct mapping tables up to bffb0000 @ 10000-15000
[    0.000000] RAMDISK: 37832000 - 37fefbde
[    0.000000] ACPI: RSDP 00000000000fa960 00014 (v00 ACPIAM)
[    0.000000] ACPI: RSDT 00000000bffb0000 00038 (v01 A_M_I_ OEMRSDT  02000821 MSFT 00000097)
[    0.000000] ACPI: FACP 00000000bffb0200 00084 (v02 A_M_I_ OEMFACP  02000821 MSFT 00000097)
[    0.000000] ACPI: DSDT 00000000bffb05c0 04E3F (v01  A0498 A0498000 00000000 INTL 20060113)
[    0.000000] ACPI: FACS 00000000bffbe000 00040
[    0.000000] ACPI: APIC 00000000bffb0390 00068 (v01 A_M_I_ OEMAPIC  02000821 MSFT 00000097)
[    0.000000] ACPI: MCFG 00000000bffb0400 0003C (v01 A_M_I_ OEMMCFG  02000821 MSFT 00000097)
[    0.000000] ACPI: OEMB 00000000bffbe040 00060 (v01 A_M_I_ AMI_OEM  02000821 MSFT 00000097)
[    0.000000] ACPI: HPET 00000000bffb5400 00038 (v01 A_M_I_ OEMHPET  02000821 MSFT 00000097)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] Scanning NUMA topology in Northbridge 24
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at 0000000000000000-00000000bffb0000
[    0.000000] Bootmem setup node 0 0000000000000000-00000000bffb0000
[    0.000000]   NODE_DATA [0000000000013000 - 0000000000017fff]
[    0.000000]   bootmap [0000000000018000 -  000000000002fff7] pages 18
[    0.000000] (7 early reservations) ==> bootmem [0000000000 - 00bffb0000]
[    0.000000]   #0 [0000000000 - 0000001000]   BIOS data page ==> [0000000000 - 0000001000]
[    0.000000]   #1 [0000006000 - 0000008000]       TRAMPOLINE ==> [0000006000 - 0000008000]
[    0.000000]   #2 [0001000000 - 00019e2ccc]    TEXT DATA BSS ==> [0001000000 - 00019e2ccc]
[    0.000000]   #3 [0037832000 - 0037fefbde]          RAMDISK ==> [0037832000 - 0037fefbde]
[    0.000000]   #4 [000009dc00 - 0000100000]    BIOS reserved ==> [000009dc00 - 0000100000]
[    0.000000]   #5 [00019e3000 - 00019e3290]              BRK ==> [00019e3000 - 00019e3290]
[    0.000000]   #6 [0000010000 - 0000013000]          PGTABLE ==> [0000010000 - 0000013000]
[    0.000000] found SMP MP-table at [ffff8800000ff780] ff780
[    0.000000]  [ffffea0000000000-ffffea00029fffff] PMD -> [ffff880001e00000-ffff8800047fffff] on node 0
[    0.000000] PERCPU: Embedded 30 pages at ffff880001a00000, static data 90720 bytes
[    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 775382
[    0.000000] Node 0: aperture @ 5180000000 size 32 MB
[    0.000000] Aperture beyond 4GB. Ignoring.
[    0.000000] Memory: 3083436k/3145408k available (5313k kernel code, 460k absent, 61512k reserved, 3011k data, 660k init)
[    0.000000] Detected 1999.677 MHz processor.
[    0.001369] Console: colour VGA+ 80x25
[    0.001372] console [tty0] enabled
[    0.010000] allocated 31457280 bytes of page_cgroup
[    0.010000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[    0.010000] HPET config register value = 0xFFFFFFFF. Disabling HPET
[    0.010008] Calibrating delay loop (skipped), value calculated using timer frequency.. 3999.35 BogoMIPS (lpj=19996770)
[    0.010038] Security Framework initialized
[    0.010060] AppArmor: AppArmor initialized
[    0.010453] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.013802] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[    0.015387] Mount-cache hash table entries: 256
[    0.015544] Initializing cgroup subsys ns
[    0.015549] Initializing cgroup subsys cpuacct
[    0.015554] Initializing cgroup subsys memory
[    0.015562] Initializing cgroup subsys freezer
[    0.015564] Initializing cgroup subsys net_cls
[    0.015577] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[    0.015580] CPU: L2 Cache: 256K (64 bytes/line)
[    0.015583] CPU 0/0x0 -> Node 0
[    0.015585] tseg: 0000000000
[    0.015604] CPU: Physical Processor ID: 0
[    0.015605] CPU: Processor Core ID: 0
[    0.015609] mce: CPU supports 5 MCE banks
[    0.015619] using C1E aware idle routine
[    0.015621] Performance Counters: AMD PMU driver.
[    0.015626] ... version:                 0
[    0.015627] ... bit width:               48
[    0.015629] ... generic counters:        4
[    0.015631] ... value mask:              0000ffffffffffff
[    0.015633] ... max period:              00007fffffffffff
[    0.015635] ... fixed-purpose counters:  0
[    0.015637] ... counter mask:            000000000000000f
[    0.017268] ACPI: Core revision 20090521
[    0.024635] Setting APIC routing to flat
[    0.025000] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0
[    0.125018] CPU0: AMD Athlon(tm) 64 X2 Dual Core Processor 3600+ stepping 02
[    0.130000] Booting processor 1 APIC 0x1 ip 0x6000
[    0.010000] Initializing CPU#1
[    0.010000] Calibrating delay using timer specific routine.. 3999.69 BogoMIPS (lpj=19998491)
[    0.010000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[    0.010000] CPU: L2 Cache: 256K (64 bytes/line)
[    0.010000] CPU 1/0x1 -> Node 0
[    0.010000] CPU: Physical Processor ID: 0
[    0.010000] CPU: Processor Core ID: 1
[    0.010000] mce: CPU supports 5 MCE banks
[    0.010000] x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106
[    0.280466] CPU1: AMD Athlon(tm) 64 X2 Dual Core Processor 3600+ stepping 02
[    0.280483] Brought up 2 CPUs
[    0.280486] Total of 2 processors activated (7999.05 BogoMIPS).
[    0.280547] CPU0 attaching sched-domain:
[    0.280550]  domain 0: span 0-1 level MC
[    0.280553]   groups: 0 1
[    0.280558] CPU1 attaching sched-domain:
[    0.280560]  domain 0: span 0-1 level MC
[    0.280562]   groups: 1 0
[    0.280639] Booting paravirtualized kernel on bare hardware
[    0.280639] regulator: core version 0.5
[    0.280639] Time: 15:04:50  Date: 10/22/09
[    0.280639] NET: Registered protocol family 16
[    0.280639] node 0 link 0: io port [1000, ffffff]
[    0.280639] TOM: 00000000c0000000 aka 3072M
[    0.280639] node 0 link 0: mmio [e0000000, efffffff]
[    0.280639] node 0 link 0: mmio [a0000, bffff]
[    0.280639] node 0 link 0: mmio [c0000000, ffffffff]
[    0.280639] bus: [00,ff] on node 0 link 0
[    0.280639] bus: 00 index 0 io port: [0, ffff]
[    0.280639] bus: 00 index 1 mmio: [c0000000, fcffffffff]
[    0.280639] bus: 00 index 2 mmio: [a0000, bffff]
[    0.280639] ACPI: bus type pci registered
[    0.280639] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
[    0.280639] PCI: Not using MMCONFIG.
[    0.280639] PCI: Using configuration type 1 for base access
[    0.281170] bio: create slab <bio-0> at 0
[    0.281170] ACPI: EC: Look up EC in DSDT
[    0.291600] ACPI: Interpreter enabled
[    0.291605] ACPI: (supports S0 S1 S3 S4 S5)
[    0.291630] ACPI: Using IOAPIC for interrupt routing
[    0.291689] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
[    0.297432] PCI: MCFG area at e0000000 reserved in ACPI motherboard resources
[    0.303626] PCI: Using MMCONFIG at e0000000 - efffffff
[    0.312854] ACPI Warning: Incorrect checksum in table [OEMB] - 65, should be 58 20090521 tbutils-246
[    0.312977] ACPI: No dock devices found.
[    0.313104] ACPI: PCI Root Bridge [PCI0] (0000:00)
[    0.313600] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
[    0.313605] pci 0000:00:02.0: PME# disabled
[    0.313662] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
[    0.313667] pci 0000:00:03.0: PME# disabled
[    0.313725] pci 0000:00:03.1: PME# supported from D0 D3hot D3cold
[    0.313729] pci 0000:00:03.1: PME# disabled
[    0.313787] pci 0000:00:03.2: PME# supported from D0 D3hot D3cold
[    0.313792] pci 0000:00:03.2: PME# disabled
[    0.313850] pci 0000:00:03.3: PME# supported from D0 D3hot D3cold
[    0.313854] pci 0000:00:03.3: PME# disabled
[    0.313911] pci 0000:00:0f.0: reg 10 io port: [0xcc00-0xcc07]
[    0.313918] pci 0000:00:0f.0: reg 14 io port: [0xc880-0xc883]
[    0.313924] pci 0000:00:0f.0: reg 18 io port: [0xc800-0xc807]
[    0.313931] pci 0000:00:0f.0: reg 1c io port: [0xc480-0xc483]
[    0.313937] pci 0000:00:0f.0: reg 20 io port: [0xc400-0xc40f]
[    0.313944] pci 0000:00:0f.0: reg 24 io port: [0xc000-0xc0ff]
[    0.314008] pci 0000:00:0f.1: reg 20 io port: [0xfc00-0xfc0f]
[    0.314081] pci 0000:00:10.0: reg 20 io port: [0xb480-0xb49f]
[    0.314105] pci 0000:00:10.0: supports D1 D2
[    0.314107] pci 0000:00:10.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.314112] pci 0000:00:10.0: PME# disabled
[    0.314155] pci 0000:00:10.1: reg 20 io port: [0xb800-0xb81f]
[    0.314178] pci 0000:00:10.1: supports D1 D2
[    0.314180] pci 0000:00:10.1: PME# supported from D0 D1 D2 D3hot D3cold
[    0.314184] pci 0000:00:10.1: PME# disabled
[    0.314227] pci 0000:00:10.2: reg 20 io port: [0xb880-0xb89f]
[    0.314251] pci 0000:00:10.2: supports D1 D2
[    0.314253] pci 0000:00:10.2: PME# supported from D0 D1 D2 D3hot D3cold
[    0.314257] pci 0000:00:10.2: PME# disabled
[    0.314300] pci 0000:00:10.3: reg 20 io port: [0xbc00-0xbc1f]
[    0.314323] pci 0000:00:10.3: supports D1 D2
[    0.314326] pci 0000:00:10.3: PME# supported from D0 D1 D2 D3hot D3cold
[    0.314330] pci 0000:00:10.3: PME# disabled
[    0.314359] pci 0000:00:10.4: reg 10 32bit mmio: [0xf6cffc00-0xf6cffcff]
[    0.314396] pci 0000:00:10.4: supports D1 D2
[    0.314399] pci 0000:00:10.4: PME# supported from D0 D1 D2 D3hot D3cold
[    0.314403] pci 0000:00:10.4: PME# disabled
[    0.314784] pci 0000:02:00.0: reg 10 64bit mmio: [0xd0000000-0xdfffffff]
[    0.314794] pci 0000:02:00.0: reg 18 64bit mmio: [0xf6de0000-0xf6deffff]
[    0.314800] pci 0000:02:00.0: reg 20 io port: [0xd000-0xd0ff]
[    0.314810] pci 0000:02:00.0: reg 30 32bit mmio: [0xf6dc0000-0xf6ddffff]
[    0.314829] pci 0000:02:00.0: supports D1 D2
[    0.314870] pci 0000:02:00.1: reg 10 64bit mmio: [0xf6df0000-0xf6dfffff]
[    0.314905] pci 0000:02:00.1: supports D1 D2
[    0.314955] pci 0000:00:02.0: bridge io port: [0xd000-0xdfff]
[    0.314959] pci 0000:00:02.0: bridge 32bit mmio: [0xf6d00000-0xf6dfffff]
[    0.314965] pci 0000:00:02.0: bridge 64bit mmio pref: [0xd0000000-0xdfffffff]
[    0.315006] pci 0000:06:00.0: reg 10 io port: [0xec00-0xec07]
[    0.315013] pci 0000:06:00.0: reg 14 io port: [0xe880-0xe883]
[    0.315020] pci 0000:06:00.0: reg 18 io port: [0xe800-0xe807]
[    0.315028] pci 0000:06:00.0: reg 1c io port: [0xe480-0xe483]
[    0.315035] pci 0000:06:00.0: reg 20 io port: [0xe400-0xe40f]
[    0.315043] pci 0000:06:00.0: reg 24 32bit mmio: [0xf6fffc00-0xf6ffffff]
[    0.315076] pci 0000:06:00.0: supports D1
[    0.315079] pci 0000:06:00.0: PME# supported from D0 D1 D3hot
[    0.315083] pci 0000:06:00.0: PME# disabled
[    0.315133] pci 0000:00:03.0: bridge io port: [0xe000-0xefff]
[    0.315137] pci 0000:00:03.0: bridge 32bit mmio: [0xf6f00000-0xf6ffffff]
[    0.315192] pci 0000:00:03.1: bridge 64bit mmio pref: [0xf5f00000-0xf5ffffff]
[    0.315238] pci 0000:04:00.0: reg 10 64bit mmio: [0xf6ec0000-0xf6efffff]
[    0.315265] pci 0000:04:00.0: reg 30 32bit mmio: [0xf6ea0000-0xf6ebffff]
[    0.315295] pci 0000:04:00.0: PME# supported from D3hot D3cold
[    0.315300] pci 0000:04:00.0: PME# disabled
[    0.315353] pci 0000:00:03.2: bridge 32bit mmio: [0xf6e00000-0xf6efffff]
[    0.315409] pci 0000:00:03.3: bridge 64bit mmio pref: [0xf5e00000-0xf5efffff]
[    0.315443] pci 0000:80:01.0: reg 10 64bit mmio: [0xfbffc000-0xfbffffff]
[    0.315478] pci 0000:80:01.0: PME# supported from D0 D3hot D3cold
[    0.315482] pci 0000:80:01.0: PME# disabled
[    0.315527] pci 0000:00:13.0: bridge 32bit mmio: [0xfbf00000-0xfbffffff]
[    0.315573] pci 0000:07:07.0: reg 10 32bit mmio: [0xf7000000-0xf7ffffff]
[    0.315640] pci 0000:07:07.1: reg 10 32bit mmio: [0xf8000000-0xf8ffffff]
[    0.315703] pci 0000:07:07.2: reg 10 32bit mmio: [0xf9000000-0xf9ffffff]
[    0.315767] pci 0000:07:07.4: reg 10 32bit mmio: [0xfa000000-0xfaffffff]
[    0.315837] pci 0000:00:13.1: transparent bridge
[    0.315842] pci 0000:00:13.1: bridge 32bit mmio: [0xf7000000-0xfaffffff]
[    0.315882] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[    0.316050] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
[    0.316105] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NBPG._PRT]
[    0.316158] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NBP0._PRT]
[    0.316211] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NBP1._PRT]
[    0.316264] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NBP2._PRT]
[    0.316318] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NBP3._PRT]
[    0.316392] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P9._PRT]
[    0.316458] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0PA._PRT]
[    0.334374] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[    0.334486] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[    0.334594] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[    0.334702] ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 5 6 7 10 11 12 14 15)
[    0.334810] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[    0.334919] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[    0.335028] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[    0.335137] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[    0.335345] SCSI subsystem initialized
[    0.335402] libata version 3.00 loaded.
[    0.335402] usbcore: registered new interface driver usbfs
[    0.335402] usbcore: registered new interface driver hub
[    0.335402] usbcore: registered new device driver usb
[    0.335402] ACPI: WMI: Mapper loaded
[    0.335402] PCI: Using ACPI for IRQ routing
[    0.360008] Bluetooth: Core ver 2.15
[    0.360031] NET: Registered protocol family 31
[    0.360031] Bluetooth: HCI device and connection manager initialized
[    0.360031] Bluetooth: HCI socket layer initialized
[    0.360031] NetLabel: Initializing
[    0.360031] NetLabel:  domain hash size = 128
[    0.360031] NetLabel:  protocols = UNLABELED CIPSOv4
[    0.360040] NetLabel:  unlabeled traffic allowed by default
[    0.390016] pnp: PnP ACPI init
[    0.390037] ACPI: bus type pnp registered
[    0.396227] pnp: PnP ACPI: found 16 devices
[    0.396231] ACPI: ACPI bus type pnp unregistered
[    0.396245] system 00:06: ioport range 0xc00-0xc0f has been reserved
[    0.396248] system 00:06: ioport range 0xd00-0xd0f has been reserved
[    0.396251] system 00:06: ioport range 0xa20-0xa2f has been reserved
[    0.396254] system 00:06: ioport range 0xa30-0xa3f has been reserved
[    0.396264] system 00:08: ioport range 0x3e0-0x3e7 has been reserved
[    0.396267] system 00:08: ioport range 0x4d0-0x4d1 has been reserved
[    0.396270] system 00:08: ioport range 0x800-0x87f has been reserved
[    0.396273] system 00:08: ioport range 0x400-0x41f has been reserved
[    0.396281] system 00:0a: iomem range 0xfec00000-0xfec00fff could not be reserved
[    0.396285] system 00:0a: iomem range 0xfee00000-0xfee00fff has been reserved
[    0.396291] system 00:0e: iomem range 0xe0000000-0xefffffff has been reserved
[    0.396297] system 00:0f: iomem range 0x0-0x9ffff could not be reserved
[    0.396300] system 00:0f: iomem range 0xc0000-0xcffff has been reserved
[    0.396303] system 00:0f: iomem range 0xe0000-0xfffff could not be reserved
[    0.396306] system 00:0f: iomem range 0x100000-0xbfffffff could not be reserved
[    0.396309] system 00:0f: iomem range 0xff380000-0xffffffff could not be reserved
[    0.400984] AppArmor: AppArmor Filesystem Enabled
[    0.401083] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
[    0.401085] pci 0000:00:01.0:   IO window: disabled
[    0.401090] pci 0000:00:01.0:   MEM window: disabled
[    0.401094] pci 0000:00:01.0:   PREFETCH window: disabled
[    0.401099] pci 0000:00:02.0: PCI bridge, secondary bus 0000:02
[    0.401102] pci 0000:00:02.0:   IO window: 0xd000-0xdfff
[    0.401107] pci 0000:00:02.0:   MEM window: 0xf6d00000-0xf6dfffff
[    0.401112] pci 0000:00:02.0:   PREFETCH window: 0x000000d0000000-0x000000dfffffff
[    0.401118] pci 0000:00:03.0: PCI bridge, secondary bus 0000:06
[    0.401122] pci 0000:00:03.0:   IO window: 0xe000-0xefff
[    0.401127] pci 0000:00:03.0:   MEM window: 0xf6f00000-0xf6ffffff
[    0.401131] pci 0000:00:03.0:   PREFETCH window: disabled
[    0.401136] pci 0000:00:03.1: PCI bridge, secondary bus 0000:05
[    0.401138] pci 0000:00:03.1:   IO window: disabled
[    0.401143] pci 0000:00:03.1:   MEM window: disabled
[    0.401148] pci 0000:00:03.1:   PREFETCH window: 0x000000f5f00000-0x000000f5ffffff
[    0.401155] pci 0000:00:03.2: PCI bridge, secondary bus 0000:04
[    0.401157] pci 0000:00:03.2:   IO window: disabled
[    0.401162] pci 0000:00:03.2:   MEM window: 0xf6e00000-0xf6efffff
[    0.401166] pci 0000:00:03.2:   PREFETCH window: disabled
[    0.401171] pci 0000:00:03.3: PCI bridge, secondary bus 0000:03
[    0.401173] pci 0000:00:03.3:   IO window: disabled
[    0.401178] pci 0000:00:03.3:   MEM window: disabled
[    0.401182] pci 0000:00:03.3:   PREFETCH window: 0x000000f5e00000-0x000000f5efffff
[    0.401189] pci 0000:00:13.0: PCI bridge, secondary bus 0000:80
[    0.401191] pci 0000:00:13.0:   IO window: disabled
[    0.401196] pci 0000:00:13.0:   MEM window: 0xfbf00000-0xfbffffff
[    0.401200] pci 0000:00:13.0:   PREFETCH window: disabled
[    0.401205] pci 0000:00:13.1: PCI bridge, secondary bus 0000:07
[    0.401207] pci 0000:00:13.1:   IO window: disabled
[    0.401212] pci 0000:00:13.1:   MEM window: 0xf7000000-0xfaffffff
[    0.401215] pci 0000:00:13.1:   PREFETCH window: disabled
[    0.401228] pci 0000:00:01.0: setting latency timer to 64
[    0.401237]   alloc irq_desc for 27 on node 0
[    0.401240]   alloc kstat_irqs on node 0
[    0.401247] pci 0000:00:02.0: PCI INT A -> GSI 27 (level, low) -> IRQ 27
[    0.401251] pci 0000:00:02.0: setting latency timer to 64
[    0.401258]   alloc irq_desc for 31 on node 0
[    0.401260]   alloc kstat_irqs on node 0
[    0.401264] pci 0000:00:03.0: PCI INT A -> GSI 31 (level, low) -> IRQ 31
[    0.401268] pci 0000:00:03.0: setting latency timer to 64
[    0.401275]   alloc irq_desc for 35 on node 0
[    0.401277]   alloc kstat_irqs on node 0
[    0.401281] pci 0000:00:03.1: PCI INT B -> GSI 35 (level, low) -> IRQ 35
[    0.401285] pci 0000:00:03.1: setting latency timer to 64
[    0.401292]   alloc irq_desc for 39 on node 0
[    0.401294]   alloc kstat_irqs on node 0
[    0.401297] pci 0000:00:03.2: PCI INT C -> GSI 39 (level, low) -> IRQ 39
[    0.401302] pci 0000:00:03.2: setting latency timer to 64
[    0.401309]   alloc irq_desc for 43 on node 0
[    0.401310]   alloc kstat_irqs on node 0
[    0.401314] pci 0000:00:03.3: PCI INT D -> GSI 43 (level, low) -> IRQ 43
[    0.401318] pci 0000:00:03.3: setting latency timer to 64
[    0.401325] pci 0000:00:13.0: setting latency timer to 64
[    0.401330] pci 0000:00:13.1: setting latency timer to 64
[    0.401336] pci_bus 0000:00: resource 0 io:  [0x00-0xffff]
[    0.401338] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff]
[    0.401342] pci_bus 0000:02: resource 0 io:  [0xd000-0xdfff]
[    0.401344] pci_bus 0000:02: resource 1 mem: [0xf6d00000-0xf6dfffff]
[    0.401347] pci_bus 0000:02: resource 2 pref mem [0xd0000000-0xdfffffff]
[    0.401350] pci_bus 0000:06: resource 0 io:  [0xe000-0xefff]
[    0.401353] pci_bus 0000:06: resource 1 mem: [0xf6f00000-0xf6ffffff]
[    0.401356] pci_bus 0000:05: resource 2 pref mem [0xf5f00000-0xf5ffffff]
[    0.401359] pci_bus 0000:04: resource 1 mem: [0xf6e00000-0xf6efffff]
[    0.401362] pci_bus 0000:03: resource 2 pref mem [0xf5e00000-0xf5efffff]
[    0.401366] pci_bus 0000:80: resource 1 mem: [0xfbf00000-0xfbffffff]
[    0.401368] pci_bus 0000:07: resource 1 mem: [0xf7000000-0xfaffffff]
[    0.401371] pci_bus 0000:07: resource 3 io:  [0x00-0xffff]
[    0.401374] pci_bus 0000:07: resource 4 mem: [0x000000-0xffffffffffffffff]
[    0.401416] NET: Registered protocol family 2
[    0.401596] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.403377] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[    0.409091] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    0.409784] TCP: Hash tables configured (established 524288 bind 65536)
[    0.409787] TCP reno registered
[    0.409889] NET: Registered protocol family 1
[    0.409965] Trying to unpack rootfs image as initramfs...
[    0.410022] Switched to high resolution mode on CPU 0
[    0.410418] Switched to high resolution mode on CPU 1
[    0.616164] Freeing initrd memory: 7926k freed
[    0.621552] Scanning for low memory corruption every 60 seconds
[    0.621697] audit: initializing netlink socket (disabled)
[    0.621716] type=2000 audit(1256223890.620:1): initialized
[    0.631264] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    0.632829] VFS: Disk quotas dquot_6.5.2
[    0.632899] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.633587] fuse init (API version 7.12)
[    0.633677] msgmni has been set to 6037
[    0.633970] alg: No test for stdrng (krng)
[    0.633996] io scheduler noop registered
[    0.633998] io scheduler anticipatory registered
[    0.634000] io scheduler deadline registered
[    0.634060] io scheduler cfq registered (default)
[    0.634069] pci 0000:00:00.0: MSI quirk detected; MSI disabled
[    0.634086] pci 0000:00:01.0: disabling DAC on VIA PCI bridge
[    0.634190] pci 0000:02:00.0: Boot video device
[    0.634421] pcieport-driver 0000:00:02.0: setting latency timer to 64
[    0.634574] pcieport-driver 0000:00:03.0: setting latency timer to 64
[    0.634721] pcieport-driver 0000:00:03.1: setting latency timer to 64
[    0.634875] pcieport-driver 0000:00:03.2: setting latency timer to 64
[    0.635024] pcieport-driver 0000:00:03.3: setting latency timer to 64
[    0.635204] aer 0000:00:02.0:pcie02: AER service couldn't init device: no _OSC support
[    0.635212] aer 0000:00:03.0:pcie02: AER service couldn't init device: no _OSC support
[    0.635219] aer 0000:00:03.1:pcie02: AER service couldn't init device: no _OSC support
[    0.635225] aer 0000:00:03.2:pcie02: AER service couldn't init device: no _OSC support
[    0.635231] aer 0000:00:03.3:pcie02: AER service couldn't init device: no _OSC support
[    0.635241] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    0.635371] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    0.635518] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[    0.635522] ACPI: Power Button [PWRF]
[    0.635582] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input1
[    0.635588] ACPI: Sleep Button [SLPB]
[    0.635631] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2
[    0.635634] ACPI: Power Button [PWRB]
[    0.636029] processor LNXCPU:00: registered as cooling_device0
[    0.636033] ACPI: Processor [CPU0] (supports 16 throttling states)
[    0.636069] processor LNXCPU:01: registered as cooling_device1
[    0.640901] Linux agpgart interface v0.103
[    0.640914] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    0.641013] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    0.641315] 00:0b: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    0.642320] brd: module loaded
[    0.642776] loop: module loaded
[    0.642877] input: Macintosh mouse button emulation as /devices/virtual/input/input3
[    0.643138] ahci 0000:06:00.0: version 3.0
[    0.643154]   alloc irq_desc for 28 on node 0
[    0.643157]   alloc kstat_irqs on node 0
[    0.643164] ahci 0000:06:00.0: PCI INT A -> GSI 28 (level, low) -> IRQ 28
[    0.643192] ahci 0000:06:00.0: controller can't do NCQ, turning off CAP_NCQ
[    0.643194] ahci 0000:06:00.0: controller can't do PMP, turning off CAP_PMP
[    0.643197] ahci 0000:06:00.0: MV_AHCI HACK: port_map 7 -> 3
[    0.643199] ahci 0000:06:00.0: Disabling your PATA port. Use the boot option 'ahci.marvell_enable=0' to avoid this.
[    0.643233] ahci: SSS flag set, parallel bus scan disabled
[    0.643240] ahci 0000:06:00.0: PCI: Disallowing DAC for device
[    0.643263] ahci 0000:06:00.0: AHCI 0001.0000 32 slots 3 ports 3 Gbps 0x3 impl IDE mode
[    0.643266] ahci 0000:06:00.0: flags: 64bit stag led slum part 
[    0.643272] ahci 0000:06:00.0: setting latency timer to 64
[    0.643517] scsi0 : ahci
[    0.643663] scsi1 : ahci
[    0.643726] scsi2 : ahci
[    0.643764] ata1: SATA max UDMA/133 abar m1024@0xf6fffc00 port 0xf6fffd00 irq 28
[    0.643768] ata2: SATA max UDMA/133 abar m1024@0xf6fffc00 port 0xf6fffd80 irq 28
[    0.643770] ata3: DUMMY
[    0.644430] pata_via 0000:00:0f.1: version 0.3.4
[    0.644593] scsi3 : pata_via
[    0.644674] scsi4 : pata_via
[    0.646963] ata4: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xfc00 irq 14
[    0.646966] ata5: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xfc08 irq 15
[    0.647170]   alloc irq_desc for 21 on node 0
[    0.647173]   alloc kstat_irqs on node 0
[    0.647180] pata_acpi 0000:00:0f.0: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[    0.647232] pata_acpi 0000:00:0f.0: PCI INT B disabled
[    0.647599] Fixed MDIO Bus: probed
[    0.647637] PPP generic driver version 2.4.2
[    0.647761] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.647836] ehci_hcd 0000:00:10.4: PCI INT C -> GSI 21 (level, low) -> IRQ 21
[    0.647857] ehci_hcd 0000:00:10.4: EHCI Host Controller
[    0.647926] ehci_hcd 0000:00:10.4: new USB bus registered, assigned bus number 1
[    0.647981] ehci_hcd 0000:00:10.4: irq 21, io mem 0xf6cffc00
[    0.660013] ehci_hcd 0000:00:10.4: USB 2.0 started, EHCI 1.00
[    0.660090] usb usb1: configuration #1 chosen from 1 choice
[    0.660120] hub 1-0:1.0: USB hub found
[    0.660128] hub 1-0:1.0: 8 ports detected
[    0.660221] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    0.660247] uhci_hcd: USB Universal Host Controller Interface driver
[    0.660381]   alloc irq_desc for 20 on node 0
[    0.660384]   alloc kstat_irqs on node 0
[    0.660391] uhci_hcd 0000:00:10.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[    0.660401] uhci_hcd 0000:00:10.0: UHCI Host Controller
[    0.660458] uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 2
[    0.660493] uhci_hcd 0000:00:10.0: irq 20, io base 0x0000b480
[    0.660599] usb usb2: configuration #1 chosen from 1 choice
[    0.660627] hub 2-0:1.0: USB hub found
[    0.660636] hub 2-0:1.0: 2 ports detected
[    0.660749]   alloc irq_desc for 22 on node 0
[    0.660751]   alloc kstat_irqs on node 0
[    0.660757] uhci_hcd 0000:00:10.1: PCI INT B -> GSI 22 (level, low) -> IRQ 22
[    0.660764] uhci_hcd 0000:00:10.1: UHCI Host Controller
[    0.660804] uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 3
[    0.660833] uhci_hcd 0000:00:10.1: irq 22, io base 0x0000b800
[    0.660918] usb usb3: configuration #1 chosen from 1 choice
[    0.660946] hub 3-0:1.0: USB hub found
[    0.660954] hub 3-0:1.0: 2 ports detected
[    0.661054] uhci_hcd 0000:00:10.2: PCI INT C -> GSI 21 (level, low) -> IRQ 21
[    0.661061] uhci_hcd 0000:00:10.2: UHCI Host Controller
[    0.661109] uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 4
[    0.661130] uhci_hcd 0000:00:10.2: irq 21, io base 0x0000b880
[    0.661212] usb usb4: configuration #1 chosen from 1 choice
[    0.661241] hub 4-0:1.0: USB hub found
[    0.661249] hub 4-0:1.0: 2 ports detected
[    0.661348]   alloc irq_desc for 23 on node 0
[    0.661350]   alloc kstat_irqs on node 0
[    0.661357] uhci_hcd 0000:00:10.3: PCI INT D -> GSI 23 (level, low) -> IRQ 23
[    0.661364] uhci_hcd 0000:00:10.3: UHCI Host Controller
[    0.661401] uhci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 5
[    0.661435] uhci_hcd 0000:00:10.3: irq 23, io base 0x0000bc00
[    0.661525] usb usb5: configuration #1 chosen from 1 choice
[    0.661553] hub 5-0:1.0: USB hub found
[    0.661562] hub 5-0:1.0: 2 ports detected
[    0.661677] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
[    0.662025] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.662032] serio: i8042 AUX port at 0x60,0x64 irq 12
[    0.662119] mice: PS/2 mouse device common for all mice
[    0.662228] rtc_cmos 00:09: RTC can wake from S4
[    0.662270] rtc_cmos 00:09: rtc core: registered rtc_cmos as rtc0
[    0.662306] rtc0: alarms up to one year, y3k, 114 bytes nvram
[    0.662436] device-mapper: uevent: version 1.0.3
[    0.662577] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com
[    0.662671] device-mapper: multipath: version 1.1.0 loaded
[    0.662675] device-mapper: multipath round-robin: version 1.0.0 loaded
[    0.662869] cpuidle: using governor ladder
[    0.662871] cpuidle: using governor menu
[    0.663333] TCP cubic registered
[    0.663473] NET: Registered protocol family 10
[    0.663927] lo: Disabled Privacy Extensions
[    0.664218] NET: Registered protocol family 17
[    0.664248] Bluetooth: L2CAP ver 2.13
[    0.664250] Bluetooth: L2CAP socket layer initialized
[    0.664253] Bluetooth: SCO (Voice Link) ver 0.6
[    0.664255] Bluetooth: SCO socket layer initialized
[    0.664298] Bluetooth: RFCOMM TTY layer initialized
[    0.664302] Bluetooth: RFCOMM socket layer initialized
[    0.664303] Bluetooth: RFCOMM ver 1.11
[    0.664336] powernow-k8: Found 1 AMD Athlon(tm) 64 X2 Dual Core Processor 3600+ processors (2 cpu cores) (version 2.20.00)
[    0.664350] [Firmware Bug]: powernow-k8: No compatible ACPI _PSS objects found.
[    0.664352] [Firmware Bug]: powernow-k8: Try again with latest BIOS.
[    0.664458] PM: Resume from disk failed.
[    0.664471] registered taskstats version 1
[    0.664683]   Magic number: 13:780:83
[    0.664802] rtc_cmos 00:09: setting system clock to 2009-10-22 15:04:51 UTC (1256223891)
[    0.664805] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    0.664807] EDD information not available.
[    0.803049] ata4.00: ATAPI: TOSHIBA DVD-ROM SD-M1912, TM01, max UDMA/33
[    0.820381] ata4.00: configured for UDMA/33
[    0.992523] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    0.994441] ata1.00: ATA-8: SAMSUNG HD501LJ, CR100-11, max UDMA7
[    0.994444] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[    0.996438] ata1.00: configured for UDMA/133
[    0.996544] scsi 0:0:0:0: Direct-Access     ATA      SAMSUNG HD501LJ  CR10 PQ: 0 ANSI: 5
[    0.996687] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    0.996727] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[    0.996771] sd 0:0:0:0: [sda] Write Protect is off
[    0.996774] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    0.996797] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    0.996927]  sda: sda1
[    1.003897] sd 0:0:0:0: [sda] Attached SCSI disk
[    1.260014] usb 3-1: new low speed USB device using uhci_hcd and address 2
[    1.342523] ata2: SATA link down (SStatus 0 SControl 300)
[    1.343061] scsi 3:0:0:0: CD-ROM            TOSHIBA  DVD-ROM SD-M1912 TM01 PQ: 0 ANSI: 5
[    1.344775] sr0: scsi3-mmc drive: 1x/48x cd/rw xa/form2 cdda tray
[    1.344778] Uniform CD-ROM driver Revision: 3.20
[    1.344870] sr 3:0:0:0: Attached scsi CD-ROM sr0
[    1.344928] sr 3:0:0:0: Attached scsi generic sg1 type 5
[    1.513924] usb 3-1: configuration #1 chosen from 1 choice
[    1.522871] ata5.00: ATAPI: TSSTcorpCD/DVDW TS-H552B, TS06, max UDMA/33
[    1.562746] ata5.00: configured for UDMA/33
[    1.563904] scsi 4:0:0:0: CD-ROM            TSSTcorp CD/DVDW TS-H552B TS06 PQ: 0 ANSI: 5
[    1.567014] sr1: scsi3-mmc drive: 1x/48x writer cd/rw xa/form2 cdda tray
[    1.567114] sr 4:0:0:0: Attached scsi CD-ROM sr1
[    1.567165] sr 4:0:0:0: Attached scsi generic sg2 type 5
[    1.567199] Freeing unused kernel memory: 660k freed
[    1.567583] Write protecting the kernel read-only data: 7580k
[    1.720603] sata_via 0000:00:0f.0: version 2.4
[    1.720618] sata_via 0000:00:0f.0: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[    1.720659] sata_via 0000:00:0f.0: routed to hard irq line 10
[    1.720717] scsi5 : sata_via
[    1.720802] scsi6 : sata_via
[    1.722964] ata6: SATA max UDMA/133 cmd 0xcc00 ctl 0xc880 bmdma 0xc400 irq 21
[    1.722968] ata7: SATA max UDMA/133 cmd 0xc800 ctl 0xc480 bmdma 0xc408 irq 21
[    1.791697] FDC 0 is a post-1991 82077
[    1.802894] usb 3-2: new low speed USB device using uhci_hcd and address 3
[    1.833980] usbcore: registered new interface driver hiddev
[    1.872283] input: PATEN USB HID Device         as /devices/pci0000:00/0000:00:10.1/usb3/3-1/3-1:1.0/input/input4
[    1.872364] generic-usb 0003:1020:0106.0001: input,hidraw0: USB HID v1.10 Keyboard [PATEN USB HID Device        ] on usb-0000:00:10.1-1/input0
[    1.930025] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    1.934969] input: PATEN USB HID Device         as /devices/pci0000:00/0000:00:10.1/usb3/3-1/3-1:1.1/input/input5
[    1.935045] generic-usb 0003:1020:0106.0002: input,hidraw1: USB HID v1.10 Device [PATEN USB HID Device        ] on usb-0000:00:10.1-1/input1
[    1.966208] input: PATEN USB HID Device         as /devices/pci0000:00/0000:00:10.1/usb3/3-1/3-1:1.2/input/input6
[    1.966294] generic-usb 0003:1020:0106.0003: input,hidraw2: USB HID v1.10 Mouse [PATEN USB HID Device        ] on usb-0000:00:10.1-1/input2
[    1.966316] usbcore: registered new interface driver usbhid
[    1.966320] usbhid: v2.6:USB HID core driver
[    1.985956] usb 3-2: configuration #1 chosen from 1 choice
[    2.002210] input: MosArt Optical Mouse as /devices/pci0000:00/0000:00:10.1/usb3/3-2/3-2:1.0/input/input7
[    2.002305] generic-usb 0003:13EE:0003.0004: input,hidraw3: USB HID v1.10 Mouse [MosArt Optical Mouse] on usb-0000:00:10.1-2/input0
[    2.110338] ata6.00: ATA-7: SAMSUNG SP2504C, VT100-50, max UDMA7
[    2.110343] ata6.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[    2.152830] ata6.00: configured for UDMA/133
[    2.152934] scsi 5:0:0:0: Direct-Access     ATA      SAMSUNG SP2504C  VT10 PQ: 0 ANSI: 5
[    2.153104] sd 5:0:0:0: Attached scsi generic sg3 type 0
[    2.153155] sd 5:0:0:0: [sdb] 488397168 512-byte logical blocks: (250 GB/232 GiB)
[    2.153199] sd 5:0:0:0: [sdb] Write Protect is off
[    2.153203] sd 5:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[    2.153226] sd 5:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.153355]  sdb: sdb1 sdb2 sdb3
[    2.180091] sd 5:0:0:0: [sdb] Attached SCSI disk
[    2.360017] ata7: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    2.540340] ata7.00: ATA-7: SAMSUNG SP2504C, VT100-41, max UDMA7
[    2.540343] ata7.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[    2.580335] ata7.00: configured for UDMA/133
[    2.580428] scsi 6:0:0:0: Direct-Access     ATA      SAMSUNG SP2504C  VT10 PQ: 0 ANSI: 5
[    2.580601] sd 6:0:0:0: Attached scsi generic sg4 type 0
[    2.580648] sd 6:0:0:0: [sdc] 488397168 512-byte logical blocks: (250 GB/232 GiB)
[    2.580691] sd 6:0:0:0: [sdc] Write Protect is off
[    2.580694] sd 6:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[    2.580716] sd 6:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.580842]  sdc: sdc1
[    2.584628] sd 6:0:0:0: [sdc] Attached SCSI disk
[    2.602017] [drm] Initialized drm 1.1.0 20060810
[    2.604749]   alloc irq_desc for 36 on node 0
[    2.604754]   alloc kstat_irqs on node 0
[    2.604764] atl1 0000:04:00.0: PCI INT A -> GSI 36 (level, low) -> IRQ 36
[    2.604775] atl1 0000:04:00.0: setting latency timer to 64
[    2.604806] atl1 0000:04:00.0: version 2.1.3
[    2.622857] [drm] radeon default to kernel modesetting DISABLED.
[    2.623314]   alloc irq_desc for 24 on node 0
[    2.623316]   alloc kstat_irqs on node 0
[    2.623325] pci 0000:02:00.0: PCI INT A -> GSI 24 (level, low) -> IRQ 24
[    2.623331] pci 0000:02:00.0: setting latency timer to 64
[    2.623487] [drm] Initialized radeon 1.31.0 20080528 for 0000:02:00.0 on minor 0
[    3.555342] xor: automatically using best checksumming function: generic_sse
[    3.600008]    generic_sse:  6254.400 MB/sec
[    3.600011] xor: using function: generic_sse (6254.400 MB/sec)
[    3.602950] device-mapper: dm-raid45: initialized v0.2594b
[    3.861858] PM: Starting manual resume from disk
[    3.861864] PM: Resume from partition 8:19
[    3.861866] PM: Checking hibernation image.
[    3.862095] PM: Resume from disk failed.
[    3.865954] EXT3-fs: INFO: recovery required on readonly filesystem.
[    3.865958] EXT3-fs: write access will be enabled during recovery.
[    4.971298] kjournald starting.  Commit interval 5 seconds
[    4.971319] EXT3-fs: recovery complete.
[    4.977373] EXT3-fs: mounted filesystem with writeback data mode.
[    5.758957] type=1505 audit(1256223896.587:2): operation="profile_load" pid=472 name=/sbin/dhclient3
[    5.759259] type=1505 audit(1256223896.587:3): operation="profile_load" pid=472 name=/usr/lib/NetworkManager/nm-dhcp-client.action
[    5.759428] type=1505 audit(1256223896.587:4): operation="profile_load" pid=472 name=/usr/lib/connman/scripts/dhclient-script
[    5.795667] type=1505 audit(1256223896.627:5): operation="profile_load" pid=474 name=/usr/lib/cups/backend/cups-pdf
[    5.796040] type=1505 audit(1256223896.627:6): operation="profile_load" pid=474 name=/usr/sbin/cupsd
[    5.823923] type=1505 audit(1256223896.657:7): operation="profile_load" pid=475 name=/usr/sbin/mysqld
[    5.830175] type=1505 audit(1256223896.657:8): operation="profile_load" pid=476 name=/usr/sbin/mysqld-akonadi
[    5.848998] type=1505 audit(1256223896.677:9): operation="profile_load" pid=477 name=/usr/sbin/tcpdump
[    7.270535] Adding 6064528k swap on /dev/sdb3.  Priority:-1 extents:1 across:6064528k 
[    7.297849] EXT3 FS on sdb1, internal journal
[    7.299236] udev: starting version 147
[    8.290270] kjournald starting.  Commit interval 5 seconds
[    8.290288] EXT3-fs warning: maximal mount count reached, running e2fsck is recommended
[    8.322041] EXT3 FS on sdb2, internal journal
[    8.322048] EXT3-fs: recovery complete.
[    8.342536] EXT3-fs: mounted filesystem with writeback data mode.
[    8.420558] kjournald starting.  Commit interval 5 seconds
[    8.420575] EXT3-fs warning: maximal mount count reached, running e2fsck is recommended
[    8.420892] EXT3 FS on sdc1, internal journal
[    8.420895] EXT3-fs: recovery complete.
[    8.420899] EXT3-fs: mounted filesystem with writeback data mode.
[    8.466768] kjournald starting.  Commit interval 5 seconds
[    8.466781] EXT3-fs warning: maximal mount count reached, running e2fsck is recommended
[    8.467063] EXT3 FS on sda1, internal journal
[    8.467066] EXT3-fs: recovery complete.
[    8.467070] EXT3-fs: mounted filesystem with writeback data mode.
[    8.659656] type=1505 audit(1256223899.487:10): operation="profile_replace" pid=815 name=/sbin/dhclient3
[    8.659960] type=1505 audit(1256223899.487:11): operation="profile_replace" pid=815 name=/usr/lib/NetworkManager/nm-dhcp-client.action
[    9.658172] ip_tables: (C) 2000-2006 Netfilter Core Team
[   10.153976] Linux video capture interface: v2.00
[   10.196141] EDAC MC: Ver: 2.1.0 Oct 16 2009
[   10.236481] k8temp 0000:00:18.3: Temperature readouts might be wrong - check erratum #141
[   10.237239] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[   10.402133] EDAC amd64_edac:  Ver: 3.2.0 Oct 16 2009
[   10.402834] EDAC amd64: ECC is enabled by BIOS, Proceeding with EDAC module initialization
[   10.402906] EDAC MC: Rev F or later detected
[   10.402996] EDAC MC0: Giving out device to 'amd64_edac' 'RevF': DEV 0000:00:18.2
[   10.403023] EDAC PCI0: Giving out device to module 'amd64_edac' controller 'EDAC PCI controller': DEV '0000:00:18.2' (POLLED)
[   10.436432] cx88/2: cx2388x MPEG-TS Driver Manager version 0.0.7 loaded
[   10.437508] cx88[0]: subsystem: 0070:9202, board: Hauppauge Nova-S-Plus DVB-S [card=37,autodetected], frontend(s): 1
[   10.437513] cx88[0]: TV tuner type 4, Radio tuner type -1
[   10.559782] cx88/0: cx2388x v4l2 driver version 0.0.7 loaded
[   10.609273] tveeprom 1-0050: Hauppauge model 92001, rev B2B1, serial# 779822
[   10.609279] tveeprom 1-0050: MAC address is 00-0D-FE-0B-E6-2E
[   10.609282] tveeprom 1-0050: tuner model is Conexant_CX24109 (idx 111, type 4)
[   10.609286] tveeprom 1-0050: TV standards ATSC/DVB Digital (eeprom 0x80)
[   10.609289] tveeprom 1-0050: audio processor is CX883 (idx 32)
[   10.609292] tveeprom 1-0050: decoder processor is CX883 (idx 22)
[   10.609295] tveeprom 1-0050: has no radio, has IR receiver, has no IR transmitter
[   10.609298] cx88[0]: hauppauge eeprom: model=92001
[   10.612497] input: cx88 IR (Hauppauge Nova-S-Plus  as /devices/pci0000:00/0000:00:13.1/0000:07:07.2/input/input8
[   10.612550] cx88[0]/2: cx2388x 8802 Driver Manager
[   10.612566]   alloc irq_desc for 17 on node 0
[   10.612569]   alloc kstat_irqs on node 0
[   10.612577] cx88-mpeg driver manager 0000:07:07.2: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[   10.612586] cx88[0]/2: found at 0000:07:07.2, rev: 5, irq: 17, latency: 64, mmio: 0xf9000000
[   10.612600] IRQ 17/cx88[0]: IRQF_DISABLED is not guaranteed on shared IRQs
[   10.615759] cx8800 0000:07:07.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[   10.615769] cx88[0]/0: found at 0000:07:07.0, rev: 5, irq: 17, latency: 64, mmio: 0xf7000000
[   10.615781] IRQ 17/cx88[0]: IRQF_DISABLED is not guaranteed on shared IRQs
[   10.615869] cx88[0]/0: registered device video0 [v4l2]
[   10.615895] cx88[0]/0: registered device vbi0
[   10.869126] cx88/2: cx2388x dvb driver version 0.0.7 loaded
[   10.869131] cx88/2: registering cx8802 driver, type: dvb access: shared
[   10.869136] cx88[0]/2: subsystem: 0070:9202, board: Hauppauge Nova-S-Plus DVB-S [card=37]
[   10.869140] cx88[0]/2: cx2388x based DVB/ATSC card
[   10.869142] cx8802_alloc_frontends() allocating 1 frontend(s)
[   11.007662] cx2388x alsa driver version 0.0.7 loaded
[   11.007794] cx88_audio 0000:07:07.1: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[   11.007805] IRQ 17/cx88[0]: IRQF_DISABLED is not guaranteed on shared IRQs
[   11.007833] cx88[0]/1: CX88x/0: ALSA support for cx2388x boards
[   11.072625] CX24123: cx24123_i2c_readreg: reg=0x0 (error=-6)
[   11.072630] CX24123: wrong demod revision: fa
[   11.072739] cx88[0]/2: frontend initialization failed
[   11.072743] cx88[0]/2: dvb_register failed (err = -22)
[   11.072746] cx88[0]/2: cx8802 probe failed, err = -22
[   11.077688] HDA Intel 0000:80:01.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[   11.077731] HDA Intel 0000:80:01.0: setting latency timer to 64
[   11.077736] HDA Intel 0000:80:01.0: PCI: Disallowing DAC for device
[   11.336668] hda_codec: Unknown model for ALC660, trying auto-probe from BIOS...
[   11.336779] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:13.0/0000:80:01.0/input/input9
[   11.354633] parport_pc 00:05: reported by Plug and Play ACPI
[   11.354663] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE,EPP]
[   11.366727] lp: driver loaded but no devices found
[   11.432686] lp0: using parport0 (interrupt-driven).
[   11.553098] ppdev: user-space parallel port driver
[   14.744657] atl1 0000:04:00.0: Unable to enable MSI: -22
[   14.744760] atl1 0000:04:00.0: eth0 link is up 100 Mbps full duplex
[   17.780804] usplash:401 freeing invalid memtype ffffffffd0000000-ffffffffd1000000
[   20.459688] __ratelimit: 18 callbacks suppressed
[   20.459693] type=1503 audit(1256223911.285:18): operation="open" pid=1577 parent=1576 profile="/usr/sbin/mysqld" requested_mask="r::" denied_mask="r::" fsuid=0 ouid=0 name="/sys/devices/system/cpu/"
[   20.829674] [drm] Setting GART location based on new memory map
[   20.829957] [drm] Loading R500 Microcode
[   20.830038] [drm] Num pipes: 1
[   20.830046] [drm] writeback test succeeded in 1 usecs
[   20.929895] type=1503 audit(1256223911.757:19): operation="open" pid=1638 parent=1637 profile="/usr/sbin/mysqld" requested_mask="r::" denied_mask="r::" fsuid=0 ouid=0 name="/sys/devices/system/cpu/"
[   22.031751] type=1503 audit(1256223911.491:20): operation="open" pid=1674 parent=1673 profile="/usr/sbin/mysqld" requested_mask="r::" denied_mask="r::" fsuid=0 ouid=0 name="/sys/devices/system/cpu/"
[   23.046661] type=1503 audit(1256223912.511:21): operation="open" pid=1714 parent=1713 profile="/usr/sbin/mysqld" requested_mask="r::" denied_mask="r::" fsuid=0 ouid=0 name="/sys/devices/system/cpu/"
[   24.062729] type=1503 audit(1256223913.531:22): operation="open" pid=1759 parent=1758 profile="/usr/sbin/mysqld" requested_mask="r::" denied_mask="r::" fsuid=0 ouid=0 name="/sys/devices/system/cpu/"
[   25.078217] type=1503 audit(1256223914.541:23): operation="open" pid=1794 parent=1793 profile="/usr/sbin/mysqld" requested_mask="r::" denied_mask="r::" fsuid=0 ouid=0 name="/sys/devices/system/cpu/"
[   25.412518] eth0: no IPv6 routers present
[   26.097742] type=1503 audit(1256223915.559:24): operation="open" pid=1828 parent=1827 profile="/usr/sbin/mysqld" requested_mask="r::" denied_mask="r::" fsuid=0 ouid=0 name="/sys/devices/system/cpu/"
[   27.114384] type=1503 audit(1256223916.579:25): operation="open" pid=1838 parent=1837 profile="/usr/sbin/mysqld" requested_mask="r::" denied_mask="r::" fsuid=0 ouid=0 name="/sys/devices/system/cpu/"
[   28.128494] type=1503 audit(1256223917.589:26): operation="open" pid=1849 parent=1848 profile="/usr/sbin/mysqld" requested_mask="r::" denied_mask="r::" fsuid=0 ouid=0 name="/sys/devices/system/cpu/"
[   29.149377] type=1503 audit(1256223918.609:27): operation="open" pid=1862 parent=1861 profile="/usr/sbin/mysqld" requested_mask="r::" denied_mask="r::" fsuid=0 ouid=0 name="/sys/devices/system/cpu/"
[   30.164333] type=1503 audit(1256223919.631:28): operation="open" pid=1873 parent=1872 profile="/usr/sbin/mysqld" requested_mask="r::" denied_mask="r::" fsuid=0 ouid=0 name="/sys/devices/system/cpu/"
[   31.179108] type=1503 audit(1256223920.641:29): operation="open" pid=1883 parent=1882 profile="/usr/sbin/mysqld" requested_mask="r::" denied_mask="r::" fsuid=0 ouid=0 name="/sys/devices/system/cpu/"
[   32.196553] type=1503 audit(1256223921.661:30): operation="open" pid=1897 parent=1896 profile="/usr/sbin/mysqld" requested_mask="r::" denied_mask="r::" fsuid=0 ouid=0 name="/sys/devices/system/cpu/"
[   33.212977] type=1503 audit(1256223922.679:31): operation="open" pid=1946 parent=1945 profile="/usr/sbin/mysqld" requested_mask="r::" denied_mask="r::" fsuid=0 ouid=0 name="/sys/devices/system/cpu/"
[   34.233801] type=1503 audit(1256223923.699:32): operation="open" pid=1956 parent=1955 profile="/usr/sbin/mysqld" requested_mask="r::" denied_mask="r::" fsuid=0 ouid=0 name="/sys/devices/system/cpu/"
[   35.251990] type=1503 audit(1256223924.710:33): operation="open" pid=1966 parent=1965 profile="/usr/sbin/mysqld" requested_mask="r::" denied_mask="r::" fsuid=0 ouid=0 name="/sys/devices/system/cpu/"
[   35.271122] type=1503 audit(1256223924.731:34): operation="open" pid=1975 parent=1974 profile="/usr/sbin/mysqld" requested_mask="r::" denied_mask="r::" fsuid=0 ouid=0 name="/sys/devices/system/cpu/"
[   56.093862] hda-intel: IRQ timing workaround is activated for card #0. Suggest a bigger bdl_pos_adj.
[ 3834.706137] type=1503 audit(1256227724.170:35): operation="open" pid=3036 parent=3034 profile="/usr/sbin/mysqld-akonadi" requested_mask="::r" denied_mask="::r" fsuid=1000 ouid=0 name="/sys/devices/system/cpu/"