[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.31-14-generic (buildd@rothera) (gcc version 4.4.1 (Ubuntu 4.4.1-4ubuntu8) ) #48-Ubuntu SMP Fri Oct 16 14:04:26 UTC 2009 (Ubuntu 2.6.31-14.48-generic) [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] NSC Geode by NSC [ 0.000000] Cyrix CyrixInstead [ 0.000000] Centaur CentaurHauls [ 0.000000] Transmeta GenuineTMx86 [ 0.000000] Transmeta TransmetaCPU [ 0.000000] UMC UMC UMC UMC [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f000 (usable) [ 0.000000] BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 00000000dfee0000 (usable) [ 0.000000] BIOS-e820: 00000000dfee0000 - 00000000dfee3000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000dfee3000 - 00000000dfef0000 (ACPI data) [ 0.000000] BIOS-e820: 00000000dfef0000 - 00000000dff00000 (reserved) [ 0.000000] BIOS-e820: 00000000f0000000 - 00000000f4000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved) [ 0.000000] BIOS-e820: 0000000100000000 - 0000000120000000 (usable) [ 0.000000] DMI 2.4 present. [ 0.000000] Phoenix BIOS detected: BIOS may corrupt low RAM, working around it. [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) [ 0.000000] last_pfn = 0xdfee0 max_arch_pfn = 0x100000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-C7FFF write-protect [ 0.000000] C8000-FFFFF uncachable [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 0000000000 mask FF80000000 write-back [ 0.000000] 1 base 0080000000 mask FFC0000000 write-back [ 0.000000] 2 base 00C0000000 mask FFE0000000 write-back [ 0.000000] 3 base 00DFF00000 mask FFFFF00000 uncachable [ 0.000000] 4 base 0100000000 mask FFE0000000 write-back [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] TOM2: 0000000120000000 aka 4608M [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] e820 update range: 00000000dff00000 - 0000000100000000 (usable) ==> (reserved) [ 0.000000] Scanning 0 areas for low memory corruption [ 0.000000] modified physical RAM map: [ 0.000000] modified: 0000000000000000 - 0000000000010000 (reserved) [ 0.000000] modified: 0000000000010000 - 000000000009f000 (usable) [ 0.000000] modified: 000000000009f000 - 00000000000a0000 (reserved) [ 0.000000] modified: 00000000000f0000 - 0000000000100000 (reserved) [ 0.000000] modified: 0000000000100000 - 00000000dfee0000 (usable) [ 0.000000] modified: 00000000dfee0000 - 00000000dfee3000 (ACPI NVS) [ 0.000000] modified: 00000000dfee3000 - 00000000dfef0000 (ACPI data) [ 0.000000] modified: 00000000dfef0000 - 00000000dff00000 (reserved) [ 0.000000] modified: 00000000f0000000 - 00000000f4000000 (reserved) [ 0.000000] modified: 00000000fec00000 - 0000000100000000 (reserved) [ 0.000000] modified: 0000000100000000 - 0000000120000000 (usable) [ 0.000000] initial memory mapped : 0 - 00c00000 [ 0.000000] init_memory_mapping: 0000000000000000-00000000377fe000 [ 0.000000] Using x86 segment limits to approximate NX protection [ 0.000000] 0000000000 - 0000400000 page 4k [ 0.000000] 0000400000 - 0037400000 page 2M [ 0.000000] 0037400000 - 00377fe000 page 4k [ 0.000000] kernel direct mapping tables up to 377fe000 @ 10000-15000 [ 0.000000] RAMDISK: 37867000 - 37fef7f4 [ 0.000000] Allocated new RAMDISK: 008ad000 - 010357f4 [ 0.000000] Move RAMDISK from 0000000037867000 - 0000000037fef7f3 to 008ad000 - 010357f3 [ 0.000000] ACPI: RSDP 000f7720 00024 (v02 Nvidia) [ 0.000000] ACPI: XSDT dfee3100 0004C (v01 _ASUS_ Notebook 42302E31 AWRD 00000000) [ 0.000000] ACPI: FACP dfeeac00 000F4 (v03 _ASUS_ Notebook 42302E31 AWRD 00000000) [ 0.000000] ACPI: DSDT dfee3280 07908 (v01 _ASUS_ Notebook 00001000 MSFT 03000000) [ 0.000000] ACPI: FACS dfee0000 00040 [ 0.000000] ACPI: SLIC dfeeae40 00176 (v01 _ASUS_ Notebook 42302E31 AWRD 00000000) [ 0.000000] ACPI: HPET dfeeb000 00038 (v01 _ASUS_ Notebook 42302E31 AWRD 00000098) [ 0.000000] ACPI: MCFG dfeeb080 0003C (v01 _ASUS_ Notebook 42302E31 AWRD 00000000) [ 0.000000] ACPI: APIC dfeead40 00098 (v01 _ASUS_ Notebook 42302E31 AWRD 00000000) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] 2694MB HIGHMEM available. [ 0.000000] 887MB LOWMEM available. [ 0.000000] mapped low ram: 0 - 377fe000 [ 0.000000] low ram: 0 - 377fe000 [ 0.000000] node 0 low ram: 00000000 - 377fe000 [ 0.000000] node 0 bootmap 00011000 - 00017f00 [ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 00377fe000] [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] [ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000] [ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000] [ 0.000000] #3 [0000100000 - 00008a80a0] TEXT DATA BSS ==> [0000100000 - 00008a80a0] [ 0.000000] #4 [000009f000 - 0000100000] BIOS reserved ==> [000009f000 - 0000100000] [ 0.000000] #5 [00008a9000 - 00008ac145] BRK ==> [00008a9000 - 00008ac145] [ 0.000000] #6 [0000010000 - 0000011000] PGTABLE ==> [0000010000 - 0000011000] [ 0.000000] #7 [00008ad000 - 00010357f4] NEW RAMDISK ==> [00008ad000 - 00010357f4] [ 0.000000] #8 [0000011000 - 0000018000] BOOTMAP ==> [0000011000 - 0000018000] [ 0.000000] found SMP MP-table at [c00f5980] f5980 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000010 -> 0x00001000 [ 0.000000] Normal 0x00001000 -> 0x000377fe [ 0.000000] HighMem 0x000377fe -> 0x000dfee0 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[2] active PFN ranges [ 0.000000] 0: 0x00000010 -> 0x0000009f [ 0.000000] 0: 0x00000100 -> 0x000dfee0 [ 0.000000] On node 0 totalpages: 917103 [ 0.000000] free_area_init_node: node 0, pgdat c0784900, node_mem_map c1036200 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 3951 pages, LIFO batch:0 [ 0.000000] Normal zone: 1744 pages used for memmap [ 0.000000] Normal zone: 221486 pages, LIFO batch:31 [ 0.000000] HighMem zone: 5390 pages used for memmap [ 0.000000] HighMem zone: 684500 pages, LIFO batch:31 [ 0.000000] Using APIC driver default [ 0.000000] Detected use of extended apic ids on hypertransport bus [ 0.000000] ACPI: PM-Timer IO Port: 0x1008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 4, version 17, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] ACPI: IRQ14 used by override. [ 0.000000] ACPI: IRQ15 used by override. [ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x10de8201 base: 0xfefff000 [ 0.000000] SMP: Allowing 4 CPUs, 2 hotplug CPUs [ 0.000000] nr_irqs_gsi: 24 [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000 [ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000 [ 0.000000] Allocating PCI resources starting at dff00000 (gap: dff00000:10100000) [ 0.000000] NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:4 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 14 pages at c2c46000, static data 35612 bytes [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 909937 [ 0.000000] Kernel command line: root=UUID=c101fd78-e6dc-455a-bf98-2c3587d5c72d ro quiet splash [ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Enabling fast FPU save and restore... done. [ 0.000000] Enabling unmasked SIMD FPU exception support... done. [ 0.000000] Initializing CPU#0 [ 0.000000] allocated 18344000 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] Initializing HighMem for node 0 (000377fe:000dfee0) [ 0.000000] Memory: 3604224k/3668864k available (4565k kernel code, 63264k reserved, 2143k data, 540k init, 2759560k highmem) [ 0.000000] virtual kernel memory layout: [ 0.000000] fixmap : 0xfff1d000 - 0xfffff000 ( 904 kB) [ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB) [ 0.000000] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB) [ 0.000000] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB) [ 0.000000] .init : 0xc078e000 - 0xc0815000 ( 540 kB) [ 0.000000] .data : 0xc0575554 - 0xc078d308 (2143 kB) [ 0.000000] .text : 0xc0100000 - 0xc0575554 (4565 kB) [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.000000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] NR_IRQS:2304 nr_irqs:440 [ 0.000000] Extended CMOS year: 2000 [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 2008.882 MHz processor. [ 0.000010] spurious 8259A interrupt: IRQ7. [ 0.001606] Console: colour VGA+ 80x25 [ 0.001608] console [tty0] enabled [ 0.001784] hpet clockevent registered [ 0.001788] HPET: 3 timers in total, 0 timers will be used for per-cpu timer [ 0.001793] Calibrating delay loop (skipped), value calculated using timer frequency.. 4017.76 BogoMIPS (lpj=8035528) [ 0.001811] Security Framework initialized [ 0.001829] AppArmor: AppArmor initialized [ 0.001836] Mount-cache hash table entries: 512 [ 0.001950] Initializing cgroup subsys ns [ 0.001954] Initializing cgroup subsys cpuacct [ 0.001958] Initializing cgroup subsys memory [ 0.001964] Initializing cgroup subsys freezer [ 0.001966] Initializing cgroup subsys net_cls [ 0.001977] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 0.001980] CPU: L2 Cache: 512K (64 bytes/line) [ 0.001983] CPU: Physical Processor ID: 0 [ 0.001984] CPU: Processor Core ID: 0 [ 0.001988] mce: CPU supports 5 MCE banks [ 0.001996] using C1E aware idle routine [ 0.002002] Performance Counters: AMD PMU driver. [ 0.002008] ... version: 0 [ 0.002010] ... bit width: 48 [ 0.002012] ... generic counters: 4 [ 0.002014] ... value mask: 0000ffffffffffff [ 0.002016] ... max period: 00007fffffffffff [ 0.002018] ... fixed-purpose counters: 0 [ 0.002019] ... counter mask: 000000000000000f [ 0.002023] Checking 'hlt' instruction... OK. [ 0.017976] ACPI: Core revision 20090521 [ 0.028512] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.068676] CPU0: AMD Athlon(tm) 64 X2 Dual Core Processor 3800+ stepping 02 [ 0.072001] Booting processor 1 APIC 0x1 ip 0x6000 [ 0.004000] Initializing CPU#1 [ 0.004000] Calibrating delay using timer specific routine.. 4018.54 BogoMIPS (lpj=8037095) [ 0.004000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 0.004000] CPU: L2 Cache: 512K (64 bytes/line) [ 0.004000] CPU: Physical Processor ID: 0 [ 0.004000] CPU: Processor Core ID: 1 [ 0.004000] mce: CPU supports 5 MCE banks [ 0.004000] x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106 [ 0.156509] CPU1: AMD Athlon(tm) 64 X2 Dual Core Processor 3800+ stepping 02 [ 0.156534] Brought up 2 CPUs [ 0.156537] Total of 2 processors activated (8036.31 BogoMIPS). [ 0.156617] CPU0 attaching sched-domain: [ 0.156620] domain 0: span 0-1 level MC [ 0.156623] groups: 0 1 [ 0.156629] CPU1 attaching sched-domain: [ 0.156631] domain 0: span 0-1 level MC [ 0.156633] groups: 1 0 [ 0.156699] Booting paravirtualized kernel on bare hardware [ 0.156699] regulator: core version 0.5 [ 0.156699] Time: 15:58:24 Date: 10/19/09 [ 0.156699] NET: Registered protocol family 16 [ 0.156699] EISA bus registered [ 0.156699] ACPI: bus type pci registered [ 0.156699] PCI: MCFG configuration 0: base f0000000 segment 0 buses 0 - 63 [ 0.156699] PCI: MCFG area at f0000000 reserved in E820 [ 0.156699] PCI: Using MMCONFIG for extended config space [ 0.156699] PCI: Using configuration type 1 for base access [ 0.157190] bio: create slab at 0 [ 0.157190] ACPI: EC: Look up EC in DSDT [ 0.168848] ACPI: Interpreter enabled [ 0.168856] ACPI: (supports S0 S1 S3 S4 S5) [ 0.168885] ACPI: Using IOAPIC for interrupt routing [ 0.177922] ACPI: No dock devices found. [ 0.178029] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 0.178247] pci 0000:00:01.1: reg 10 io port: [0xfc00-0xfc3f] [ 0.178259] pci 0000:00:01.1: reg 20 io port: [0x1c00-0x1c3f] [ 0.178264] pci 0000:00:01.1: reg 24 io port: [0x1c40-0x1c7f] [ 0.178285] pci 0000:00:01.1: PME# supported from D3hot D3cold [ 0.178291] pci 0000:00:01.1: PME# disabled [ 0.178316] pci 0000:00:02.0: reg 10 32bit mmio: [0xfe02f000-0xfe02ffff] [ 0.178336] pci 0000:00:02.0: supports D1 D2 [ 0.178338] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.178342] pci 0000:00:02.0: PME# disabled [ 0.178361] pci 0000:00:02.1: reg 10 32bit mmio: [0xfe02e000-0xfe02e0ff] [ 0.178382] pci 0000:00:02.1: supports D1 D2 [ 0.178385] pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold [ 0.178388] pci 0000:00:02.1: PME# disabled [ 0.178415] pci 0000:00:04.0: reg 20 io port: [0xf000-0xf00f] [ 0.178443] pci 0000:00:05.0: reg 10 io port: [0x9f0-0x9f7] [ 0.178448] pci 0000:00:05.0: reg 14 io port: [0xbf0-0xbf3] [ 0.178452] pci 0000:00:05.0: reg 18 io port: [0x970-0x977] [ 0.178456] pci 0000:00:05.0: reg 1c io port: [0xb70-0xb73] [ 0.178460] pci 0000:00:05.0: reg 20 io port: [0xdc00-0xdc0f] [ 0.178465] pci 0000:00:05.0: reg 24 32bit mmio: [0xfe02d000-0xfe02dfff] [ 0.178496] pci 0000:00:05.1: reg 10 io port: [0x9e0-0x9e7] [ 0.178500] pci 0000:00:05.1: reg 14 io port: [0xbe0-0xbe3] [ 0.178504] pci 0000:00:05.1: reg 18 io port: [0x960-0x967] [ 0.178509] pci 0000:00:05.1: reg 1c io port: [0xb60-0xb63] [ 0.178513] pci 0000:00:05.1: reg 20 io port: [0xc800-0xc80f] [ 0.178518] pci 0000:00:05.1: reg 24 32bit mmio: [0xfe02c000-0xfe02cfff] [ 0.178549] pci 0000:00:05.2: reg 10 io port: [0xc400-0xc407] [ 0.178553] pci 0000:00:05.2: reg 14 io port: [0xc000-0xc003] [ 0.178557] pci 0000:00:05.2: reg 18 io port: [0xbc00-0xbc07] [ 0.178562] pci 0000:00:05.2: reg 1c io port: [0xb800-0xb803] [ 0.178566] pci 0000:00:05.2: reg 20 io port: [0xb400-0xb40f] [ 0.178570] pci 0000:00:05.2: reg 24 32bit mmio: [0xfe02b000-0xfe02bfff] [ 0.178630] pci 0000:00:06.1: reg 10 32bit mmio: [0xfe024000-0xfe027fff] [ 0.178653] pci 0000:00:06.1: PME# supported from D3hot D3cold [ 0.178657] pci 0000:00:06.1: PME# disabled [ 0.178692] pci 0000:00:08.0: reg 10 32bit mmio: [0xfe02a000-0xfe02afff] [ 0.178696] pci 0000:00:08.0: reg 14 io port: [0xb000-0xb007] [ 0.178701] pci 0000:00:08.0: reg 18 32bit mmio: [0xfe029000-0xfe0290ff] [ 0.178705] pci 0000:00:08.0: reg 1c 32bit mmio: [0xfe028000-0xfe02800f] [ 0.178726] pci 0000:00:08.0: supports D1 D2 [ 0.178729] pci 0000:00:08.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.178733] pci 0000:00:08.0: PME# disabled [ 0.178771] pci 0000:00:0f.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.178774] pci 0000:00:0f.0: PME# disabled [ 0.178880] pci 0000:00:06.0: transparent bridge [ 0.178906] pci 0000:02:00.0: reg 10 32bit mmio: [0xfa000000-0xfaffffff] [ 0.178915] pci 0000:02:00.0: reg 14 64bit mmio: [0xe0000000-0xefffffff] [ 0.178922] pci 0000:02:00.0: reg 1c 64bit mmio: [0xf8000000-0xf9ffffff] [ 0.178928] pci 0000:02:00.0: reg 24 io port: [0xac00-0xac7f] [ 0.178933] pci 0000:02:00.0: reg 30 32bit mmio: [0xfbfe0000-0xfbffffff] [ 0.178983] pci 0000:00:0f.0: bridge io port: [0xa000-0xafff] [ 0.178986] pci 0000:00:0f.0: bridge 32bit mmio: [0xf8000000-0xfbffffff] [ 0.178991] pci 0000:00:0f.0: bridge 64bit mmio pref: [0xe0000000-0xefffffff] [ 0.178997] pci_bus 0000:00: on NUMA node 0 [ 0.179002] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.179302] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT] [ 0.218068] ACPI: PCI Interrupt Link [LNK1] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.218220] ACPI: PCI Interrupt Link [LNK2] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.218371] ACPI: PCI Interrupt Link [LNK3] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.218521] ACPI: PCI Interrupt Link [LNK4] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.218672] ACPI: PCI Interrupt Link [LNK5] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.218824] ACPI: PCI Interrupt Link [LNK6] (IRQs 5 7 9 10 *11 14 15) [ 0.218973] ACPI: PCI Interrupt Link [LNK7] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.219123] ACPI: PCI Interrupt Link [LNK8] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.219273] ACPI: PCI Interrupt Link [LP2P] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.219425] ACPI: PCI Interrupt Link [LUBA] (IRQs 5 7 9 *10 11 14 15) [ 0.219582] ACPI: PCI Interrupt Link [LMAC] (IRQs 5 7 9 *10 11 14 15) [ 0.219733] ACPI: PCI Interrupt Link [LAZA] (IRQs 5 7 9 *10 11 14 15) [ 0.219887] ACPI: PCI Interrupt Link [LPMU] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.220050] ACPI: PCI Interrupt Link [LSMB] (IRQs *5 7 9 10 11 14 15) [ 0.220202] ACPI: PCI Interrupt Link [LUB2] (IRQs 5 7 9 10 *11 14 15) [ 0.220352] ACPI: PCI Interrupt Link [LIDE] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.220505] ACPI: PCI Interrupt Link [LSID] (IRQs *5 7 9 10 11 14 15) [ 0.220655] ACPI: PCI Interrupt Link [LFID] (IRQs 5 7 9 *10 11 14 15) [ 0.220806] ACPI: PCI Interrupt Link [LSA2] (IRQs 5 7 9 10 *11 14 15) [ 0.220997] ACPI: PCI Interrupt Link [APC1] (IRQs 16) *0, disabled. [ 0.221182] ACPI: PCI Interrupt Link [APC2] (IRQs 17) *0, disabled. [ 0.221366] ACPI: PCI Interrupt Link [APC3] (IRQs 18) *0, disabled. [ 0.221551] ACPI: PCI Interrupt Link [APC4] (IRQs 19) *0, disabled. [ 0.221735] ACPI: PCI Interrupt Link [APC5] (IRQs 16) *0, disabled. [ 0.221921] ACPI: PCI Interrupt Link [APC6] (IRQs 16) *0 [ 0.222105] ACPI: PCI Interrupt Link [APC7] (IRQs 16) *0, disabled. [ 0.222290] ACPI: PCI Interrupt Link [APC8] (IRQs 16) *0, disabled. [ 0.222476] ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22 23) *0 [ 0.222662] ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22 23) *0 [ 0.222848] ACPI: PCI Interrupt Link [APMU] (IRQs 20 21 22 23) *0, disabled. [ 0.223035] ACPI: PCI Interrupt Link [AAZA] (IRQs 20 21 22 23) *0 [ 0.223224] ACPI: PCI Interrupt Link [APCS] (IRQs 20 21 22 23) *0 [ 0.223410] ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22 23) *0 [ 0.223596] ACPI: PCI Interrupt Link [APCM] (IRQs 20 21 22 23) *0, disabled. [ 0.223783] ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22 23) *0, disabled. [ 0.223970] ACPI: PCI Interrupt Link [APSI] (IRQs 20 21 22 23) *0 [ 0.224166] ACPI: PCI Interrupt Link [APSJ] (IRQs 20 21 22 23) *0 [ 0.224353] ACPI: PCI Interrupt Link [ASA2] (IRQs 20 21 22 23) *0 [ 0.224541] SCSI subsystem initialized [ 0.224582] libata version 3.00 loaded. [ 0.224582] usbcore: registered new interface driver usbfs [ 0.224582] usbcore: registered new interface driver hub [ 0.224582] usbcore: registered new device driver usb [ 0.224582] ACPI: WMI: Mapper loaded [ 0.224582] PCI: Using ACPI for IRQ routing [ 0.236008] Bluetooth: Core ver 2.15 [ 0.236022] NET: Registered protocol family 31 [ 0.236022] Bluetooth: HCI device and connection manager initialized [ 0.236022] Bluetooth: HCI socket layer initialized [ 0.236022] NetLabel: Initializing [ 0.236022] NetLabel: domain hash size = 128 [ 0.236022] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.236038] NetLabel: unlabeled traffic allowed by default [ 0.236069] hpet0: at MMIO 0xfefff000, IRQs 2, 8, 31 [ 0.236075] hpet0: 3 comparators, 32-bit 25.000000 MHz counter [ 0.244019] Switched to high resolution mode on CPU 0 [ 0.244544] Switched to high resolution mode on CPU 1 [ 0.252017] pnp: PnP ACPI init [ 0.252033] ACPI: bus type pnp registered [ 0.256763] pnp: PnP ACPI: found 14 devices [ 0.256765] ACPI: ACPI bus type pnp unregistered [ 0.256769] PnPBIOS: Disabled by ACPI PNP [ 0.256780] system 00:01: ioport range 0x1000-0x107f has been reserved [ 0.256783] system 00:01: ioport range 0x1080-0x10ff has been reserved [ 0.256787] system 00:01: ioport range 0x1400-0x147f has been reserved [ 0.256790] system 00:01: ioport range 0x1480-0x14ff has been reserved [ 0.256793] system 00:01: ioport range 0x1800-0x187f has been reserved [ 0.256796] system 00:01: ioport range 0x1880-0x18ff has been reserved [ 0.256803] system 00:02: ioport range 0x4d0-0x4d1 has been reserved [ 0.256806] system 00:02: ioport range 0x800-0x801 has been reserved [ 0.256809] system 00:02: ioport range 0x290-0x297 has been reserved [ 0.256818] system 00:0c: iomem range 0xf0000000-0xf3ffffff has been reserved [ 0.256824] system 00:0d: iomem range 0xccc00-0xcffff has been reserved [ 0.256827] system 00:0d: iomem range 0xf0000-0xf7fff could not be reserved [ 0.256831] system 00:0d: iomem range 0xf8000-0xfbfff could not be reserved [ 0.256834] system 00:0d: iomem range 0xfc000-0xfffff could not be reserved [ 0.256837] system 00:0d: iomem range 0xfefff000-0xfefff0ff has been reserved [ 0.256841] system 00:0d: iomem range 0xdfee0000-0xdfefffff could not be reserved [ 0.256844] system 00:0d: iomem range 0xffff0000-0xffffffff has been reserved [ 0.256847] system 00:0d: iomem range 0x0-0x9ffff could not be reserved [ 0.256851] system 00:0d: iomem range 0x100000-0xdfedffff could not be reserved [ 0.256854] system 00:0d: iomem range 0xfec00000-0xfec00fff could not be reserved [ 0.256858] system 00:0d: iomem range 0xfee00000-0xfeefffff has been reserved [ 0.256862] system 00:0d: iomem range 0xfefff000-0xfeffffff could not be reserved [ 0.256865] system 00:0d: iomem range 0xfff80000-0xfff80fff has been reserved [ 0.256872] system 00:0d: iomem range 0xfff90000-0xfffbffff has been reserved [ 0.256875] system 00:0d: iomem range 0xfffed000-0xfffeffff has been reserved [ 0.291538] AppArmor: AppArmor Filesystem Enabled [ 0.291561] pci 0000:00:06.0: PCI bridge, secondary bus 0000:01 [ 0.291563] pci 0000:00:06.0: IO window: disabled [ 0.291566] pci 0000:00:06.0: MEM window: disabled [ 0.291569] pci 0000:00:06.0: PREFETCH window: disabled [ 0.291573] pci 0000:00:0f.0: PCI bridge, secondary bus 0000:02 [ 0.291576] pci 0000:00:0f.0: IO window: 0xa000-0xafff [ 0.291579] pci 0000:00:0f.0: MEM window: 0xf8000000-0xfbffffff [ 0.291583] pci 0000:00:0f.0: PREFETCH window: 0x000000e0000000-0x000000efffffff [ 0.291591] pci 0000:00:06.0: setting latency timer to 64 [ 0.291597] pci 0000:00:0f.0: setting latency timer to 64 [ 0.291601] pci_bus 0000:00: resource 0 io: [0x00-0xffff] [ 0.291604] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff] [ 0.291607] pci_bus 0000:01: resource 3 io: [0x00-0xffff] [ 0.291610] pci_bus 0000:01: resource 4 mem: [0x000000-0xffffffff] [ 0.291613] pci_bus 0000:02: resource 0 io: [0xa000-0xafff] [ 0.291616] pci_bus 0000:02: resource 1 mem: [0xf8000000-0xfbffffff] [ 0.291619] pci_bus 0000:02: resource 2 pref mem [0xe0000000-0xefffffff] [ 0.291656] NET: Registered protocol family 2 [ 0.291754] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.292088] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.292624] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 0.292910] TCP: Hash tables configured (established 131072 bind 65536) [ 0.292912] TCP reno registered [ 0.293010] NET: Registered protocol family 1 [ 0.293073] Trying to unpack rootfs image as initramfs... [ 0.506553] Freeing initrd memory: 7713k freed [ 0.510785] cpufreq-nforce2: No nForce2 chipset. [ 0.510811] Scanning for low memory corruption every 60 seconds [ 0.510906] audit: initializing netlink socket (disabled) [ 0.510919] type=2000 audit(1255967904.508:1): initialized [ 0.520084] highmem bounce pool size: 64 pages [ 0.520089] HugeTLB registered 4 MB page size, pre-allocated 0 pages [ 0.521647] VFS: Disk quotas dquot_6.5.2 [ 0.521712] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.522335] fuse init (API version 7.12) [ 0.522418] msgmni has been set to 1666 [ 0.522661] alg: No test for stdrng (krng) [ 0.522683] io scheduler noop registered [ 0.522686] io scheduler anticipatory registered [ 0.522688] io scheduler deadline registered [ 0.522735] io scheduler cfq registered (default) [ 0.536093] pci 0000:00:05.0: Enabling HT MSI Mapping [ 0.536144] pci 0000:00:05.1: Enabling HT MSI Mapping [ 0.536192] pci 0000:00:05.2: Enabling HT MSI Mapping [ 0.536240] pci 0000:00:06.0: Enabling HT MSI Mapping [ 0.536291] pci 0000:00:06.1: Enabling HT MSI Mapping [ 0.536351] pci 0000:00:08.0: Enabling HT MSI Mapping [ 0.536411] pci 0000:00:0f.0: Enabling HT MSI Mapping [ 0.536427] pci 0000:02:00.0: Boot video device [ 0.536535] alloc irq_desc for 24 on node -1 [ 0.536538] alloc kstat_irqs on node -1 [ 0.536546] pcieport-driver 0000:00:0f.0: irq 24 for MSI/MSI-X [ 0.536551] pcieport-driver 0000:00:0f.0: setting latency timer to 64 [ 0.536616] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.536641] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 0.536779] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0 [ 0.536783] ACPI: Power Button [PWRF] [ 0.536834] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1 [ 0.536837] ACPI: Power Button [PWRB] [ 0.536899] fan PNP0C0B:00: registered as cooling_device0 [ 0.536905] ACPI: Fan [FAN] (on) [ 0.537266] processor LNXCPU:00: registered as cooling_device1 [ 0.537301] processor LNXCPU:01: registered as cooling_device2 [ 0.541680] ACPI Warning: \_TZ_.THRM._PSL: Return Package type mismatch at index 0 - found [NULL Object Descriptor], expected Reference 20090521 nspredef-946 [ 0.541689] ACPI: Expecting a [Reference] package element, found type 0 [ 0.541691] ACPI: Invalid passive threshold [ 0.542066] thermal LNXTHERM:01: registered as thermal_zone0 [ 0.542074] ACPI: Thermal Zone [THRM] (40 C) [ 0.542133] isapnp: Scanning for PnP cards... [ 0.894723] isapnp: No Plug & Play device found [ 0.895944] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.896056] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 0.896354] 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 0.897412] brd: module loaded [ 0.897884] loop: module loaded [ 0.897964] input: Macintosh mouse button emulation as /devices/virtual/input/input2 [ 0.898175] sata_nv 0000:00:05.0: version 3.5 [ 0.898523] ACPI: PCI Interrupt Link [APSI] enabled at IRQ 23 [ 0.898528] alloc irq_desc for 23 on node -1 [ 0.898530] alloc kstat_irqs on node -1 [ 0.898540] sata_nv 0000:00:05.0: PCI INT A -> Link[APSI] -> GSI 23 (level, low) -> IRQ 23 [ 0.898544] sata_nv 0000:00:05.0: Using SWNCQ mode [ 0.898903] sata_nv 0000:00:05.0: setting latency timer to 64 [ 0.899071] scsi0 : sata_nv [ 0.899179] scsi1 : sata_nv [ 0.899364] ata1: SATA max UDMA/133 cmd 0x9f0 ctl 0xbf0 bmdma 0xdc00 irq 23 [ 0.899368] ata2: SATA max UDMA/133 cmd 0x970 ctl 0xb70 bmdma 0xdc08 irq 23 [ 0.899710] ACPI: PCI Interrupt Link [APSJ] enabled at IRQ 22 [ 0.899715] alloc irq_desc for 22 on node -1 [ 0.899717] alloc kstat_irqs on node -1 [ 0.899726] sata_nv 0000:00:05.1: PCI INT B -> Link[APSJ] -> GSI 22 (level, low) -> IRQ 22 [ 0.899730] sata_nv 0000:00:05.1: Using SWNCQ mode [ 0.900110] sata_nv 0000:00:05.1: setting latency timer to 64 [ 0.900261] scsi2 : sata_nv [ 0.900341] scsi3 : sata_nv [ 0.900521] ata3: SATA max UDMA/133 cmd 0x9e0 ctl 0xbe0 bmdma 0xc800 irq 22 [ 0.900524] ata4: SATA max UDMA/133 cmd 0x960 ctl 0xb60 bmdma 0xc808 irq 22 [ 0.900874] ACPI: PCI Interrupt Link [ASA2] enabled at IRQ 21 [ 0.900879] alloc irq_desc for 21 on node -1 [ 0.900881] alloc kstat_irqs on node -1 [ 0.900890] sata_nv 0000:00:05.2: PCI INT C -> Link[ASA2] -> GSI 21 (level, low) -> IRQ 21 [ 0.900894] sata_nv 0000:00:05.2: Using SWNCQ mode [ 0.901248] sata_nv 0000:00:05.2: setting latency timer to 64 [ 0.901407] scsi4 : sata_nv [ 0.901492] scsi5 : sata_nv [ 0.901665] ata5: SATA max UDMA/133 cmd 0xc400 ctl 0xc000 bmdma 0xb400 irq 21 [ 0.901668] ata6: SATA max UDMA/133 cmd 0xbc00 ctl 0xb800 bmdma 0xb408 irq 21 [ 0.901764] pata_amd 0000:00:04.0: version 0.4.1 [ 0.901799] pata_amd 0000:00:04.0: setting latency timer to 64 [ 0.901861] scsi6 : pata_amd [ 0.901916] scsi7 : pata_amd [ 0.902677] ata7: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000 irq 14 [ 0.902680] ata8: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xf008 irq 15 [ 0.903375] Fixed MDIO Bus: probed [ 0.903410] PPP generic driver version 2.4.2 [ 0.903514] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.903847] ACPI: PCI Interrupt Link [APCL] enabled at IRQ 20 [ 0.903852] alloc irq_desc for 20 on node -1 [ 0.903854] alloc kstat_irqs on node -1 [ 0.903863] ehci_hcd 0000:00:02.1: PCI INT B -> Link[APCL] -> GSI 20 (level, low) -> IRQ 20 [ 0.903878] ehci_hcd 0000:00:02.1: setting latency timer to 64 [ 0.903881] ehci_hcd 0000:00:02.1: EHCI Host Controller [ 0.903933] ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 1 [ 0.903957] ehci_hcd 0000:00:02.1: debug port 1 [ 0.903961] ehci_hcd 0000:00:02.1: cache line size of 64 is not supported [ 0.903980] ehci_hcd 0000:00:02.1: irq 20, io mem 0xfe02e000 [ 0.911665] ata3: SATA link down (SStatus 0 SControl 300) [ 0.921989] ata5: SATA link down (SStatus 0 SControl 300) [ 0.922005] ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00 [ 0.922077] usb usb1: configuration #1 chosen from 1 choice [ 0.922107] hub 1-0:1.0: USB hub found [ 0.922116] hub 1-0:1.0: 10 ports detected [ 0.922190] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.922516] ACPI: PCI Interrupt Link [APCF] enabled at IRQ 23 [ 0.922520] ohci_hcd 0000:00:02.0: PCI INT A -> Link[APCF] -> GSI 23 (level, low) -> IRQ 23 [ 0.922528] ohci_hcd 0000:00:02.0: setting latency timer to 64 [ 0.922530] ohci_hcd 0000:00:02.0: OHCI Host Controller [ 0.922563] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2 [ 0.922575] ohci_hcd 0000:00:02.0: irq 23, io mem 0xfe02f000 [ 0.978068] usb usb2: configuration #1 chosen from 1 choice [ 0.978098] hub 2-0:1.0: USB hub found [ 0.978106] hub 2-0:1.0: 10 ports detected [ 0.978170] uhci_hcd: USB Universal Host Controller Interface driver [ 0.978250] PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1 [ 0.978252] PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp [ 0.978338] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.978406] mice: PS/2 mouse device common for all mice [ 0.978507] rtc_cmos 00:05: RTC can wake from S4 [ 0.978543] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0 [ 0.978576] rtc0: alarms up to one year, y3k, 242 bytes nvram, hpet irqs [ 0.978680] device-mapper: uevent: version 1.0.3 [ 0.978782] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com [ 0.978887] device-mapper: multipath: version 1.1.0 loaded [ 0.978889] device-mapper: multipath round-robin: version 1.0.0 loaded [ 0.979030] EISA: Probing bus 0 at eisa.0 [ 0.979036] Cannot allocate resource for EISA slot 1 [ 0.979053] EISA: Detected 0 cards. [ 0.979179] cpuidle: using governor ladder [ 0.979181] cpuidle: using governor menu [ 0.979672] TCP cubic registered [ 0.979837] NET: Registered protocol family 10 [ 0.980314] lo: Disabled Privacy Extensions [ 0.980625] NET: Registered protocol family 17 [ 0.980642] Bluetooth: L2CAP ver 2.13 [ 0.980644] Bluetooth: L2CAP socket layer initialized [ 0.980647] Bluetooth: SCO (Voice Link) ver 0.6 [ 0.980649] Bluetooth: SCO socket layer initialized [ 0.980690] Bluetooth: RFCOMM TTY layer initialized [ 0.980693] Bluetooth: RFCOMM socket layer initialized [ 0.980695] Bluetooth: RFCOMM ver 1.11 [ 0.980711] powernow-k8: Found 1 AMD Athlon(tm) 64 X2 Dual Core Processor 3800+ processors (2 cpu cores) (version 2.20.00) [ 0.980720] [Firmware Bug]: powernow-k8: No compatible ACPI _PSS objects found. [ 0.980721] [Firmware Bug]: powernow-k8: Try again with latest BIOS. [ 0.980744] Using IPI No-Shortcut mode [ 0.980807] PM: Resume from disk failed. [ 0.980819] registered taskstats version 1 [ 0.980952] Magic number: 13:485:993 [ 0.981040] rtc_cmos 00:05: setting system clock to 2009-10-19 15:58:25 UTC (1255967905) [ 0.981044] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 0.981046] EDD information not available. [ 0.996313] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3 [ 1.052033] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1.061188] ata1.00: ATA-6: WDC WD360GD-00FLA2, 31.08F31, max UDMA/133 [ 1.061191] ata1.00: 72303840 sectors, multi 1: LBA48 [ 1.077210] ata1.00: configured for UDMA/133 [ 1.077315] scsi 0:0:0:0: Direct-Access ATA WDC WD360GD-00FL 31.0 PQ: 0 ANSI: 5 [ 1.077442] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 1.077483] sd 0:0:0:0: [sda] 72303840 512-byte logical blocks: (37.0 GB/34.4 GiB) [ 1.077526] sd 0:0:0:0: [sda] Write Protect is off [ 1.077529] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.077552] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.077678] sda: [ 1.088019] ata2: SATA link down (SStatus 0 SControl 300) [ 1.090256] sda1 sda2 < sda5 [ 1.098309] ata4: SATA link down (SStatus 0 SControl 300) [ 1.108608] ata6: SATA link down (SStatus 0 SControl 300) [ 1.108622] sda6 > [ 1.108920] sd 0:0:0:0: [sda] Attached SCSI disk [ 1.248000] ata7.00: ATA-7: ST3320620A, 3.AAE, max UDMA/100 [ 1.248003] ata7.00: 625142448 sectors, multi 1: LBA48 [ 1.248033] ata7.01: ATAPI: SONY DVD RW DW-D22A, BYS2, max UDMA/66 [ 1.248057] ata7: nv_mode_filter: 0x3f39f&0x3f39f->0x3f39f, BIOS=0x3f000 (0xc6c50000) ACPI=0x3f01f (20:30:0x1f) [ 1.248063] ata7: nv_mode_filter: 0x1f39f&0x1f39f->0x1f39f, BIOS=0x1f000 (0xc6c50000) ACPI=0x1f01f (20:30:0x1f) [ 1.314589] ata7.00: configured for UDMA/100 [ 1.328196] ata7.01: configured for UDMA/66 [ 1.330078] scsi 6:0:0:0: Direct-Access ATA ST3320620A 3.AA PQ: 0 ANSI: 5 [ 1.330183] sd 6:0:0:0: [sdb] 625142448 512-byte logical blocks: (320 GB/298 GiB) [ 1.330188] sd 6:0:0:0: Attached scsi generic sg1 type 0 [ 1.330592] sd 6:0:0:0: [sdb] Write Protect is off [ 1.330596] sd 6:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 1.331001] sd 6:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.331008] scsi 6:0:1:0: CD-ROM SONY DVD RW DW-D22A BYS2 PQ: 0 ANSI: 5 [ 1.332997] sr0: scsi3-mmc drive: 47x/47x writer cd/rw xa/form2 cdda tray [ 1.333000] Uniform CD-ROM driver Revision: 3.20 [ 1.333030] sdb: [ 1.333092] sr 6:0:1:0: Attached scsi CD-ROM sr0 [ 1.333134] sr 6:0:1:0: Attached scsi generic sg2 type 5 [ 1.333167] ata8: port disabled. ignoring. [ 1.344021] usb 1-3: new high speed USB device using ehci_hcd and address 3 [ 1.362509] sdb1 sdb2 < sdb5 sdb6 sdb7 > [ 1.384294] sd 6:0:0:0: [sdb] Attached SCSI disk [ 1.384321] Freeing unused kernel memory: 540k freed [ 1.384666] Write protecting the kernel text: 4568k [ 1.384704] Write protecting the kernel read-only data: 1836k [ 1.478712] usb 1-3: configuration #1 chosen from 1 choice [ 1.541678] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.64. [ 1.542051] ACPI: PCI Interrupt Link [APCH] enabled at IRQ 22 [ 1.542056] forcedeth 0000:00:08.0: PCI INT A -> Link[APCH] -> GSI 22 (level, low) -> IRQ 22 [ 1.542061] forcedeth 0000:00:08.0: setting latency timer to 64 [ 1.542099] nv_probe: set workaround bit for reversed mac addr [ 1.543443] Floppy drive(s): fd0 is 1.44M [ 1.564549] FDC 0 is a post-1991 82077 [ 1.836522] usb 2-2: new full speed USB device using ohci_hcd and address 2 [ 2.060849] forcedeth 0000:00:08.0: ifname eth0, PHY OUI 0x5043 @ 1, addr 00:1a:92:15:91:90 [ 2.060854] forcedeth 0000:00:08.0: highdma csum vlan pwrctl mgmt gbit lnktim msi desc-v3 [ 2.133272] usb 2-2: configuration #1 chosen from 1 choice [ 2.440019] usb 2-4: new low speed USB device using ohci_hcd and address 3 [ 2.658117] usb 2-4: configuration #1 chosen from 1 choice [ 2.680077] usbcore: registered new interface driver hiddev [ 2.692369] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:02.0/usb2/2-4/2-4:1.0/input/input4 [ 2.692446] generic-usb 0003:046D:C50E.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:02.0-4/input0 [ 2.692461] usbcore: registered new interface driver usbhid [ 2.692464] usbhid: v2.6:USB HID core driver [ 2.881690] xor: automatically using best checksumming function: pIII_sse [ 2.900001] pIII_sse : 6094.000 MB/sec [ 2.900004] xor: using function: pIII_sse (6094.000 MB/sec) [ 2.902585] device-mapper: dm-raid45: initialized v0.2594b [ 3.108013] PM: Starting manual resume from disk [ 3.108018] PM: Resume from partition 8:6 [ 3.108020] PM: Checking hibernation image. [ 3.108148] PM: Resume from disk failed. [ 3.126709] EXT3-fs: INFO: recovery required on readonly filesystem. [ 3.126713] EXT3-fs: write access will be enabled during recovery. [ 4.417849] kjournald starting. Commit interval 5 seconds [ 4.417869] EXT3-fs: sdb5: orphan cleanup on readonly fs [ 4.417875] ext3_orphan_cleanup: deleting unreferenced inode 635236 [ 4.417970] ext3_orphan_cleanup: deleting unreferenced inode 635282 [ 4.418021] EXT3-fs: sdb5: 2 orphan inodes deleted [ 4.418023] EXT3-fs: recovery complete. [ 4.447336] EXT3-fs: mounted filesystem with writeback data mode. [ 5.380405] type=1505 audit(1255967909.895:2): operation="profile_load" pid=454 name=/usr/share/gdm/guest-session/Xsession [ 5.404034] type=1505 audit(1255967909.919:3): operation="profile_load" pid=455 name=/sbin/dhclient3 [ 5.404329] type=1505 audit(1255967909.919:4): operation="profile_load" pid=455 name=/usr/lib/NetworkManager/nm-dhcp-client.action [ 5.404495] type=1505 audit(1255967909.919:5): operation="profile_load" pid=455 name=/usr/lib/connman/scripts/dhclient-script [ 5.423417] type=1505 audit(1255967909.939:6): operation="profile_load" pid=456 name=/usr/bin/evince [ 5.428032] type=1505 audit(1255967909.943:7): operation="profile_load" pid=456 name=/usr/bin/evince-previewer [ 5.430813] type=1505 audit(1255967909.947:8): operation="profile_load" pid=456 name=/usr/bin/evince-thumbnailer [ 5.464925] type=1505 audit(1255967909.983:9): operation="profile_load" pid=458 name=/usr/bin/freshclam [ 5.471041] type=1505 audit(1255967909.987:10): operation="profile_load" pid=459 name=/usr/lib/cups/backend/cups-pdf [ 6.161074] Adding 1156640k swap on /dev/sdb6. Priority:-1 extents:1 across:1156640k [ 6.173640] Adding 7823612k swap on /dev/sda6. Priority:-2 extents:1 across:7823612k [ 6.519808] udev: starting version 147 [ 9.380102] sr 6:0:1:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [ 9.380108] sr 6:0:1:0: [sr0] Sense Key : Illegal Request [current] [ 9.380113] sr 6:0:1:0: [sr0] Add. Sense: Logical block address out of range [ 9.380119] end_request: I/O error, dev sr0, sector 0 [ 9.380124] __ratelimit: 6 callbacks suppressed [ 9.380127] Buffer I/O error on device sr0, logical block 0 [ 9.388545] sr 6:0:1:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [ 9.388548] sr 6:0:1:0: [sr0] Sense Key : Illegal Request [current] [ 9.388552] sr 6:0:1:0: [sr0] Add. Sense: Logical block address out of range [ 9.388556] end_request: I/O error, dev sr0, sector 0 [ 9.388559] Buffer I/O error on device sr0, logical block 0 [ 10.390010] k8temp 0000:00:18.3: Temperature readouts might be wrong - check erratum #141 [ 10.396487] Linux agpgart interface v0.103 [ 10.438755] Linux video capture interface: v2.00 [ 10.460783] pwc: Philips webcam module version 10.0.13 loaded. [ 10.460787] pwc: Supports Philips PCA645/646, PCVC675/680/690, PCVC720[40]/730/740/750 & PCVC830/840. [ 10.460790] pwc: Also supports the Askey VC010, various Logitech Quickcams, Samsung MPC-C10 and MPC-C30, [ 10.460792] pwc: the Creative WebCam 5 & Pro Ex, SOTEC Afina Eye and Visionite VCS-UC300 and VCS-UM100. [ 10.460812] pwc: Logitech QuickCam 4000 Pro USB webcam detected. [ 10.460861] pwc: Registered as /dev/video0. [ 10.465085] input: PWC snapshot button as /devices/pci0000:00/0000:00:02.0/usb2/2-2/input/input5 [ 10.465157] usbcore: registered new interface driver Philips webcam [ 10.793186] nvidia: module license 'NVIDIA' taints kernel. [ 10.793192] Disabling lock debugging due to kernel taint [ 11.047379] ACPI: PCI Interrupt Link [APC6] enabled at IRQ 16 [ 11.047386] alloc irq_desc for 16 on node -1 [ 11.047388] alloc kstat_irqs on node -1 [ 11.047399] nvidia 0000:02:00.0: PCI INT A -> Link[APC6] -> GSI 16 (level, low) -> IRQ 16 [ 11.047406] nvidia 0000:02:00.0: setting latency timer to 64 [ 11.047626] NVRM: loading NVIDIA UNIX x86 Kernel Module 185.18.36 Fri Aug 14 17:18:04 PDT 2009 [ 11.216817] usblp0: USB Bidirectional printer dev 3 if 0 alt 0 proto 2 vid 0x03F0 pid 0x3D17 [ 11.216839] usbcore: registered new interface driver usblp [ 11.271183] parport_pc 00:0a: reported by Plug and Play ACPI [ 11.271211] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE,EPP] [ 11.273405] i2c-adapter i2c-0: nForce2 SMBus adapter at 0x1c00 [ 11.273411] ACPI: I/O resource nForce2_smbus [0x1c40-0x1c7f] conflicts with ACPI region SM01 [0x1c40-0x1c45] [ 11.273415] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 11.273418] nForce2_smbus 0000:00:01.1: Error probing SMB2. [ 11.629896] EXT3 FS on sdb5, internal journal [ 11.645645] lp0: using parport0 (interrupt-driven). [ 11.675717] ip_tables: (C) 2000-2006 Netfilter Core Team [ 11.678016] ppdev: user-space parallel port driver [ 11.684387] ACPI: PCI Interrupt Link [AAZA] enabled at IRQ 21 [ 11.684395] HDA Intel 0000:00:06.1: PCI INT B -> Link[AAZA] -> GSI 21 (level, low) -> IRQ 21 [ 11.684420] HDA Intel 0000:00:06.1: setting latency timer to 64 [ 11.699347] nf_conntrack version 0.5.0 (16384 buckets, 65536 max) [ 11.699573] CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use [ 11.699576] nf_conntrack.acct=1 kernel parameter, acct=1 nf_conntrack module option or [ 11.699578] sysctl net.netfilter.nf_conntrack_acct=1 to enable it. [ 11.710385] usbcore: registered new interface driver snd-usb-audio [ 11.803661] kjournald starting. Commit interval 5 seconds [ 11.803838] EXT3 FS on sdb1, internal journal [ 11.803843] EXT3-fs: mounted filesystem with writeback data mode. [ 11.920149] tun: Universal TUN/TAP device driver, 1.6 [ 11.920153] tun: (C) 1999-2004 Max Krasnyansky [ 12.149163] ip6_tables: (C) 2000-2006 Netfilter Core Team [ 12.468513] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:06.1/input/input6 [ 12.767940] kjournald starting. Commit interval 5 seconds [ 12.768157] EXT3 FS on sdb7, internal journal [ 12.768163] EXT3-fs: mounted filesystem with writeback data mode. [ 13.970193] type=1505 audit(1255967918.486:13): operation="profile_replace" pid=1348 name=/usr/share/gdm/guest-session/Xsession [ 13.971905] type=1505 audit(1255967918.486:14): operation="profile_replace" pid=1349 name=/sbin/dhclient3 [ 13.972264] type=1505 audit(1255967918.490:15): operation="profile_replace" pid=1349 name=/usr/lib/NetworkManager/nm-dhcp-client.action [ 13.972445] type=1505 audit(1255967918.490:16): operation="profile_replace" pid=1349 name=/usr/lib/connman/scripts/dhclient-script [ 13.977542] type=1505 audit(1255967918.494:17): operation="profile_replace" pid=1350 name=/usr/bin/evince [ 13.983695] type=1505 audit(1255967918.498:18): operation="profile_replace" pid=1350 name=/usr/bin/evince-previewer [ 13.986528] type=1505 audit(1255967918.502:19): operation="profile_replace" pid=1350 name=/usr/bin/evince-thumbnailer [ 13.993096] type=1505 audit(1255967918.510:20): operation="profile_replace" pid=1355 name=/usr/bin/freshclam [ 15.352663] alloc irq_desc for 25 on node -1 [ 15.352667] alloc kstat_irqs on node -1 [ 15.352680] forcedeth 0000:00:08.0: irq 25 for MSI/MSI-X