[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.32-19-generic (buildd@yellow) (gcc version 4.4.3 (Ubuntu 4.4.3-4ubuntu5) ) #28-Ubuntu SMP Thu Apr 1 10:39:41 UTC 2010 (Ubuntu 2.6.32-19.28-generic 2.6.32.10+drm33.1) [ 0.000000] Command line: BOOT_IMAGE=/casper/vmlinuz file=/cdrom/preseed/ubuntu.seed boot=casper initrd=/casper/initrd.lz quiet splash -- [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Centaur CentaurHauls [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable) [ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 00000000cfff0000 (usable) [ 0.000000] BIOS-e820: 00000000cfff0000 - 00000000cfff3000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000cfff3000 - 00000000d0000000 (ACPI data) [ 0.000000] BIOS-e820: 00000000e0000000 - 00000000e8000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved) [ 0.000000] BIOS-e820: 0000000100000000 - 0000000130000000 (usable) [ 0.000000] DMI 2.4 present. [ 0.000000] last_pfn = 0x130000 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-C7FFF write-protect [ 0.000000] C8000-EFFFF uncachable [ 0.000000] F0000-FFFFF write-through [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 0000000000 mask FF80000000 write-back [ 0.000000] 1 base 0080000000 mask FFC0000000 write-back [ 0.000000] 2 base 00C0000000 mask FFF0000000 write-back [ 0.000000] 3 base 0100000000 mask FFE0000000 write-back [ 0.000000] 4 base 0120000000 mask FFF0000000 write-back [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] TOM2: 0000000130000000 aka 4864M [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] e820 update range: 00000000d0000000 - 0000000100000000 (usable) ==> (reserved) [ 0.000000] last_pfn = 0xcfff0 max_arch_pfn = 0x400000000 [ 0.000000] e820 update range: 0000000000001000 - 0000000000006000 (usable) ==> (reserved) [ 0.000000] Scanning 1 areas for low memory corruption [ 0.000000] modified physical RAM map: [ 0.000000] modified: 0000000000000000 - 0000000000001000 (usable) [ 0.000000] modified: 0000000000001000 - 0000000000006000 (reserved) [ 0.000000] modified: 0000000000006000 - 000000000009f800 (usable) [ 0.000000] modified: 000000000009f800 - 00000000000a0000 (reserved) [ 0.000000] modified: 00000000000f0000 - 0000000000100000 (reserved) [ 0.000000] modified: 0000000000100000 - 00000000cfff0000 (usable) [ 0.000000] modified: 00000000cfff0000 - 00000000cfff3000 (ACPI NVS) [ 0.000000] modified: 00000000cfff3000 - 00000000d0000000 (ACPI data) [ 0.000000] modified: 00000000e0000000 - 00000000e8000000 (reserved) [ 0.000000] modified: 00000000fec00000 - 0000000100000000 (reserved) [ 0.000000] modified: 0000000100000000 - 0000000130000000 (usable) [ 0.000000] initial memory mapped : 0 - 20000000 [ 0.000000] init_memory_mapping: 0000000000000000-00000000cfff0000 [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] 0000000000 - 00cfe00000 page 2M [ 0.000000] 00cfe00000 - 00cfff0000 page 4k [ 0.000000] kernel direct mapping tables up to cfff0000 @ 8000-e000 [ 0.000000] init_memory_mapping: 0000000100000000-0000000130000000 [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] 0100000000 - 0130000000 page 2M [ 0.000000] kernel direct mapping tables up to 130000000 @ c000-12000 [ 0.000000] RAMDISK: 7f6bd000 - 7ffffba2 [ 0.000000] ACPI: RSDP 00000000000f6450 00014 (v00 GBT ) [ 0.000000] ACPI: RSDT 00000000cfff3000 00034 (v01 GBT NVDAACPI 42302E31 NVDA 01010101) [ 0.000000] ACPI: FACP 00000000cfff3040 00074 (v01 GBT NVDAACPI 42302E31 NVDA 01010101) [ 0.000000] ACPI: DSDT 00000000cfff30c0 04675 (v01 GBT NVDAACPI 00001000 MSFT 0100000C) [ 0.000000] ACPI: FACS 00000000cfff0000 00040 [ 0.000000] ACPI: HPET 00000000cfff7800 00038 (v01 GBT NVDAACPI 42302E31 NVDA 00000098) [ 0.000000] ACPI: MCFG 00000000cfff7840 0003C (v01 GBT NVDAACPI 42302E31 NVDA 01010101) [ 0.000000] ACPI: APIC 00000000cfff7740 00098 (v01 GBT NVDAACPI 42302E31 NVDA 01010101) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] Scanning NUMA topology in Northbridge 24 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at 0000000000000000-0000000130000000 [ 0.000000] Bootmem setup node 0 0000000000000000-0000000130000000 [ 0.000000] NODE_DATA [000000000000d000 - 0000000000011fff] [ 0.000000] bootmap [0000000000012000 - 0000000000037fff] pages 26 [ 0.000000] (8 early reservations) ==> bootmem [0000000000 - 0130000000] [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] [ 0.000000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000] [ 0.000000] #2 [0001000000 - 0001a27e64] TEXT DATA BSS ==> [0001000000 - 0001a27e64] [ 0.000000] #3 [007f6bd000 - 007ffffba2] RAMDISK ==> [007f6bd000 - 007ffffba2] [ 0.000000] #4 [000009f800 - 0000100000] BIOS reserved ==> [000009f800 - 0000100000] [ 0.000000] #5 [0001a28000 - 0001a280ee] BRK ==> [0001a28000 - 0001a280ee] [ 0.000000] #6 [0000008000 - 000000c000] PGTABLE ==> [0000008000 - 000000c000] [ 0.000000] #7 [000000c000 - 000000d000] PGTABLE ==> [000000c000 - 000000d000] [ 0.000000] found SMP MP-table at [ffff8800000f4a90] f4a90 [ 0.000000] [ffffea0000000000-ffffea00043fffff] PMD -> [ffff880028600000-ffff88002bffffff] on node 0 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000000 -> 0x00001000 [ 0.000000] DMA32 0x00001000 -> 0x00100000 [ 0.000000] Normal 0x00100000 -> 0x00130000 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[4] active PFN ranges [ 0.000000] 0: 0x00000000 -> 0x00000001 [ 0.000000] 0: 0x00000006 -> 0x0000009f [ 0.000000] 0: 0x00000100 -> 0x000cfff0 [ 0.000000] 0: 0x00100000 -> 0x00130000 [ 0.000000] On node 0 totalpages: 1048458 [ 0.000000] DMA zone: 56 pages used for memmap [ 0.000000] DMA zone: 104 pages reserved [ 0.000000] DMA zone: 3834 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 14280 pages used for memmap [ 0.000000] DMA32 zone: 833576 pages, LIFO batch:31 [ 0.000000] Normal zone: 2688 pages used for memmap [ 0.000000] Normal zone: 193920 pages, LIFO batch:31 [ 0.000000] Detected use of extended apic ids on hypertransport bus [ 0.000000] ACPI: PM-Timer IO Port: 0x1008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] ACPI: IRQ14 used by override. [ 0.000000] ACPI: IRQ15 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x10de8201 base: 0xfeff0000 [ 0.000000] SMP: Allowing 4 CPUs, 2 hotplug CPUs [ 0.000000] nr_irqs_gsi: 24 [ 0.000000] PM: Registered nosave memory: 0000000000001000 - 0000000000006000 [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000 [ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000 [ 0.000000] PM: Registered nosave memory: 00000000cfff0000 - 00000000cfff3000 [ 0.000000] PM: Registered nosave memory: 00000000cfff3000 - 00000000d0000000 [ 0.000000] PM: Registered nosave memory: 00000000d0000000 - 00000000e0000000 [ 0.000000] PM: Registered nosave memory: 00000000e0000000 - 00000000e8000000 [ 0.000000] PM: Registered nosave memory: 00000000e8000000 - 00000000fec00000 [ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 0000000100000000 [ 0.000000] Allocating PCI resources starting at e8000000 (gap: e8000000:16c00000) [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:4 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 30 pages/cpu @ffff880028200000 s91480 r8192 d23208 u524288 [ 0.000000] pcpu-alloc: s91480 r8192 d23208 u524288 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1031330 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: BOOT_IMAGE=/casper/vmlinuz file=/cdrom/preseed/ubuntu.seed boot=casper initrd=/casper/initrd.lz quiet splash -- [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Initializing CPU#0 [ 0.000000] Checking aperture... [ 0.000000] No AGP bridge found [ 0.000000] Node 0: aperture @ 20000000 size 32 MB [ 0.000000] Aperture pointing to e820 RAM. Ignoring. [ 0.000000] Your BIOS doesn't leave a aperture memory hole [ 0.000000] Please enable the IOMMU option in the BIOS setup [ 0.000000] This costs you 64 MB of RAM [ 0.000000] Mapping aperture over 65536 KB of RAM @ 20000000 [ 0.000000] PM: Registered nosave memory: 0000000020000000 - 0000000024000000 [ 0.000000] Memory: 4048272k/4980736k available (5407k kernel code, 786904k absent, 145560k reserved, 2969k data, 876k init) [ 0.000000] SLUB: Genslabs=14, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] NR_IRQS:4352 nr_irqs:440 [ 0.000000] spurious 8259A interrupt: IRQ7. [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] allocated 41943040 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] hpet clockevent registered [ 0.000000] HPET: 3 timers in total, 0 timers will be used for per-cpu timer [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 2511.694 MHz processor. [ 0.010005] Calibrating delay loop (skipped), value calculated using timer frequency.. 5023.38 BogoMIPS (lpj=25116940) [ 0.010031] Security Framework initialized [ 0.010049] AppArmor: AppArmor initialized [ 0.010393] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.012737] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.013897] Mount-cache hash table entries: 256 [ 0.014028] Initializing cgroup subsys ns [ 0.014032] Initializing cgroup subsys cpuacct [ 0.014036] Initializing cgroup subsys memory [ 0.014043] Initializing cgroup subsys devices [ 0.014045] Initializing cgroup subsys freezer [ 0.014047] Initializing cgroup subsys net_cls [ 0.014066] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 0.014068] CPU: L2 Cache: 512K (64 bytes/line) [ 0.014070] CPU 0/0x0 -> Node 0 [ 0.014072] tseg: 0000000000 [ 0.014087] CPU: Physical Processor ID: 0 [ 0.014089] CPU: Processor Core ID: 0 [ 0.014091] mce: CPU supports 5 MCE banks [ 0.014101] using C1E aware idle routine [ 0.014103] Performance Events: AMD PMU driver. [ 0.014107] ... version: 0 [ 0.014108] ... bit width: 48 [ 0.014109] ... generic registers: 4 [ 0.014111] ... value mask: 0000ffffffffffff [ 0.014112] ... max period: 00007fffffffffff [ 0.014114] ... fixed-purpose events: 0 [ 0.014115] ... event mask: 000000000000000f [ 0.015552] ACPI: Core revision 20090903 [ 0.025692] ftrace: converting mcount calls to 0f 1f 44 00 00 [ 0.025697] ftrace: allocating 22512 entries in 89 pages [ 0.030084] Setting APIC routing to flat [ 0.030474] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.131787] CPU0: AMD Processor model unknown stepping 02 [ 0.140000] Booting processor 1 APIC 0x1 ip 0x6000 [ 0.020000] Initializing CPU#1 [ 0.020000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 0.020000] CPU: L2 Cache: 512K (64 bytes/line) [ 0.020000] CPU 1/0x1 -> Node 0 [ 0.020000] CPU: Physical Processor ID: 0 [ 0.020000] CPU: Processor Core ID: 1 [ 0.290109] CPU1: AMD Processor model unknown stepping 02 [ 0.290121] Brought up 2 CPUs [ 0.290123] Total of 2 processors activated (10046.56 BogoMIPS). [ 0.290293] CPU0 attaching sched-domain: [ 0.290295] domain 0: span 0-1 level MC [ 0.290297] groups: 0 1 [ 0.290302] CPU1 attaching sched-domain: [ 0.290303] domain 0: span 0-1 level MC [ 0.290305] groups: 1 0 [ 0.290453] devtmpfs: initialized [ 0.290740] regulator: core version 0.5 [ 0.290772] Time: 12:21:20 Date: 04/22/10 [ 0.290814] NET: Registered protocol family 16 [ 0.290923] node 0 link 0: io port [1000, fffff] [ 0.290926] TOM: 00000000d0000000 aka 3328M [ 0.290928] node 0 link 0: mmio [e0000000, e7ffffff] [ 0.290931] node 0 link 0: mmio [a0000, bffff] [ 0.290933] node 0 link 0: mmio [d0000000, ffb7ffff] [ 0.290935] TOM2: 0000000130000000 aka 4864M [ 0.290937] bus: [00,ff] on node 0 link 0 [ 0.290939] bus: 00 index 0 io port: [0, ffff] [ 0.290941] bus: 00 index 1 mmio: [d0000000, ffffffff] [ 0.290943] bus: 00 index 2 mmio: [a0000, bffff] [ 0.290945] bus: 00 index 3 mmio: [130000000, fcffffffff] [ 0.290950] ACPI: bus type pci registered [ 0.291018] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 127 [ 0.291021] PCI: MCFG area at e0000000 reserved in E820 [ 0.295770] PCI: Using MMCONFIG at e0000000 - e7ffffff [ 0.295772] PCI: Using configuration type 1 for base access [ 0.296440] Trying to unpack rootfs image as initramfs... [ 1.968585] bio: create slab at 0 [ 1.969270] ACPI: EC: Look up EC in DSDT [ 1.975868] ACPI: Interpreter enabled [ 1.975873] ACPI: (supports S0 S1 S4 S5) [ 1.975894] ACPI: Using IOAPIC for interrupt routing [ 1.983206] ACPI: No dock devices found. [ 1.983305] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 1.983526] pci 0000:00:01.1: reg 10 io port: [0xc400-0xc43f] [ 1.983536] pci 0000:00:01.1: reg 20 io port: [0x1c00-0x1c3f] [ 1.983540] pci 0000:00:01.1: reg 24 io port: [0x1c40-0x1c7f] [ 1.983558] pci 0000:00:01.1: PME# supported from D3hot D3cold [ 1.983563] pci 0000:00:01.1: PME# disabled [ 1.983611] pci 0000:00:02.0: reg 10 32bit mmio: [0xee006000-0xee006fff] [ 1.983631] pci 0000:00:02.0: supports D1 D2 [ 1.983633] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold [ 1.983636] pci 0000:00:02.0: PME# disabled [ 1.983657] pci 0000:00:02.1: reg 10 32bit mmio: [0xee007000-0xee0070ff] [ 1.983682] pci 0000:00:02.1: supports D1 D2 [ 1.983683] pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold [ 1.983687] pci 0000:00:02.1: PME# disabled [ 1.983747] pci 0000:00:05.0: reg 10 32bit mmio: [0xee000000-0xee003fff] [ 1.983771] pci 0000:00:05.0: PME# supported from D3hot D3cold [ 1.983774] pci 0000:00:05.0: PME# disabled [ 1.983807] pci 0000:00:06.0: reg 20 io port: [0xf000-0xf00f] [ 1.983843] pci 0000:00:07.0: reg 10 32bit mmio: [0xee004000-0xee004fff] [ 1.983847] pci 0000:00:07.0: reg 14 io port: [0xc800-0xc807] [ 1.983867] pci 0000:00:07.0: supports D1 D2 [ 1.983869] pci 0000:00:07.0: PME# supported from D0 D1 D2 D3hot D3cold [ 1.983873] pci 0000:00:07.0: PME# disabled [ 1.983893] pci 0000:00:08.0: reg 10 io port: [0x9f0-0x9f7] [ 1.983897] pci 0000:00:08.0: reg 14 io port: [0xbf0-0xbf3] [ 1.983900] pci 0000:00:08.0: reg 18 io port: [0x970-0x977] [ 1.983904] pci 0000:00:08.0: reg 1c io port: [0xb70-0xb73] [ 1.983907] pci 0000:00:08.0: reg 20 io port: [0xdc00-0xdc0f] [ 1.983910] pci 0000:00:08.0: reg 24 32bit mmio: [0xee005000-0xee005fff] [ 1.983958] pci 0000:00:09.0: PME# supported from D0 D1 D2 D3hot D3cold [ 1.983961] pci 0000:00:09.0: PME# disabled [ 1.984086] pci 0000:01:06.0: reg 10 32bit mmio: [0xed000000-0xed003fff] [ 1.984091] pci 0000:01:06.0: reg 14 io port: [0xa000-0xa0ff] [ 1.984109] pci 0000:01:06.0: reg 30 32bit mmio pref: [0x000000-0x01ffff] [ 1.984125] pci 0000:01:06.0: supports D1 D2 [ 1.984127] pci 0000:01:06.0: PME# supported from D0 D1 D2 D3hot D3cold [ 1.984130] pci 0000:01:06.0: PME# disabled [ 1.984159] pci 0000:01:08.0: reg 10 io port: [0xa400-0xa43f] [ 1.984189] pci 0000:01:08.0: supports D1 D2 [ 1.984216] pci 0000:00:04.0: transparent bridge [ 1.984219] pci 0000:00:04.0: bridge io port: [0xa000-0xafff] [ 1.984222] pci 0000:00:04.0: bridge 32bit mmio: [0xec000000-0xedffffff] [ 1.984247] pci 0000:02:00.0: reg 10 32bit mmio: [0xea000000-0xeaffffff] [ 1.984254] pci 0000:02:00.0: reg 14 64bit mmio pref: [0xd0000000-0xdfffffff] [ 1.984261] pci 0000:02:00.0: reg 1c 64bit mmio: [0xe8000000-0xe9ffffff] [ 1.984265] pci 0000:02:00.0: reg 24 io port: [0xb000-0xb07f] [ 1.984270] pci 0000:02:00.0: reg 30 32bit mmio pref: [0x000000-0x01ffff] [ 1.984324] pci 0000:00:09.0: bridge io port: [0xb000-0xbfff] [ 1.984326] pci 0000:00:09.0: bridge 32bit mmio: [0xe8000000-0xebffffff] [ 1.984330] pci 0000:00:09.0: bridge 64bit mmio pref: [0xd0000000-0xdfffffff] [ 1.984339] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 1.984537] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT] [ 2.015865] ACPI: PCI Interrupt Link [LNK1] (IRQs 5 7 9 *10 11 14 15) [ 2.015980] ACPI: PCI Interrupt Link [LNK2] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 2.016094] ACPI: PCI Interrupt Link [LNK3] (IRQs 5 7 9 10 *11 14 15) [ 2.016207] ACPI: PCI Interrupt Link [LNK4] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 2.016320] ACPI: PCI Interrupt Link [LNK5] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 2.016434] ACPI: PCI Interrupt Link [LNK6] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 2.016547] ACPI: PCI Interrupt Link [LNK7] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 2.016661] ACPI: PCI Interrupt Link [LNK8] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 2.016774] ACPI: PCI Interrupt Link [LIGP] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 2.016887] ACPI: PCI Interrupt Link [LP2P] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 2.017002] ACPI: PCI Interrupt Link [LUBA] (IRQs 5 7 9 10 *11 14 15) [ 2.017116] ACPI: PCI Interrupt Link [LMAC] (IRQs *5 7 9 10 11 14 15) [ 2.017230] ACPI: PCI Interrupt Link [LAZA] (IRQs 5 7 9 *10 11 14 15) [ 2.017342] ACPI: PCI Interrupt Link [LPMU] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 2.017457] ACPI: PCI Interrupt Link [LSMB] (IRQs 5 7 9 *10 11 14 15) [ 2.017575] ACPI: PCI Interrupt Link [LUB2] (IRQs *5 7 9 10 11 14 15) [ 2.017687] ACPI: PCI Interrupt Link [LIDE] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 2.017805] ACPI: PCI Interrupt Link [LSID] (IRQs 5 7 9 10 *11 14 15) [ 2.017917] ACPI: PCI Interrupt Link [LFID] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 2.018081] ACPI: PCI Interrupt Link [APC1] (IRQs 16) *0 [ 2.018241] ACPI: PCI Interrupt Link [APC2] (IRQs 17) *0, disabled. [ 2.018400] ACPI: PCI Interrupt Link [APC3] (IRQs 18) *0 [ 2.018559] ACPI: PCI Interrupt Link [APC4] (IRQs 19) *0, disabled. [ 2.018718] ACPI: PCI Interrupt Link [APC5] (IRQs 16) *0, disabled. [ 2.018877] ACPI: PCI Interrupt Link [APC6] (IRQs 16) *0, disabled. [ 2.019036] ACPI: PCI Interrupt Link [APC7] (IRQs 16) *0, disabled. [ 2.019195] ACPI: PCI Interrupt Link [APC8] (IRQs 16) *0, disabled. [ 2.019355] ACPI: PCI Interrupt Link [AIGP] (IRQs 20 21 22 23) *0, disabled. [ 2.019515] ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22 23) *0 [ 2.019674] ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22 23) *0 [ 2.019834] ACPI: PCI Interrupt Link [APMU] (IRQs 20 21 22 23) *0, disabled. [ 2.020015] ACPI: PCI Interrupt Link [AAZA] (IRQs 20 21 22 23) *0 [ 2.020176] ACPI: PCI Interrupt Link [APCS] (IRQs 20 21 22 23) *0 [ 2.020336] ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22 23) *0 [ 2.020496] ACPI: PCI Interrupt Link [APCM] (IRQs 20 21 22 23) *0, disabled. [ 2.020656] ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22 23) *0, disabled. [ 2.020816] ACPI: PCI Interrupt Link [APSI] (IRQs 20 21 22 23) *0 [ 2.020977] ACPI: PCI Interrupt Link [APSJ] (IRQs 20 21 22 23) *0, disabled. [ 2.021090] vgaarb: device added: PCI:0000:02:00.0,decodes=io+mem,owns=io+mem,locks=none [ 2.021092] vgaarb: loaded [ 2.021193] SCSI subsystem initialized [ 2.021275] libata version 3.00 loaded. [ 2.021340] usbcore: registered new interface driver usbfs [ 2.021353] usbcore: registered new interface driver hub [ 2.021377] usbcore: registered new device driver usb [ 2.021501] ACPI: WMI: Mapper loaded [ 2.021503] PCI: Using ACPI for IRQ routing [ 2.021642] NetLabel: Initializing [ 2.021644] NetLabel: domain hash size = 128 [ 2.021645] NetLabel: protocols = UNLABELED CIPSOv4 [ 2.021661] NetLabel: unlabeled traffic allowed by default [ 2.021698] hpet0: at MMIO 0xfeff0000, IRQs 2, 8, 31 [ 2.021702] hpet0: 3 comparators, 32-bit 25.000000 MHz counter [ 2.352924] Switching to clocksource hpet [ 2.356865] Freeing initrd memory: 9482k freed [ 2.364083] AppArmor: AppArmor Filesystem Enabled [ 2.364083] pnp: PnP ACPI init [ 2.364083] ACPI: bus type pnp registered [ 2.365073] pnp: PnP ACPI: found 13 devices [ 2.365075] ACPI: ACPI bus type pnp unregistered [ 2.365087] system 00:01: ioport range 0x1000-0x107f has been reserved [ 2.365090] system 00:01: ioport range 0x1080-0x10ff has been reserved [ 2.365095] system 00:01: ioport range 0x1400-0x147f has been reserved [ 2.365098] system 00:01: ioport range 0x1480-0x14ff has been reserved [ 2.365100] system 00:01: ioport range 0x1800-0x187f has been reserved [ 2.365103] system 00:01: ioport range 0x1880-0x18ff has been reserved [ 2.365106] system 00:01: iomem range 0xfefe0000-0xfefe01ff has been reserved [ 2.365109] system 00:01: iomem range 0xfefe1000-0xfefe10ff has been reserved [ 2.365114] system 00:02: ioport range 0x4d0-0x4d1 has been reserved [ 2.365117] system 00:02: ioport range 0x800-0x87f has been reserved [ 2.365120] system 00:02: ioport range 0x295-0x314 has been reserved [ 2.365123] system 00:02: ioport range 0x290-0x294 has been reserved [ 2.365129] system 00:0b: iomem range 0xe0000000-0xe7ffffff has been reserved [ 2.365134] system 00:0c: iomem range 0xd0000-0xd3fff has been reserved [ 2.365137] system 00:0c: iomem range 0xf0000-0xf7fff could not be reserved [ 2.365139] system 00:0c: iomem range 0xf8000-0xfbfff could not be reserved [ 2.365142] system 00:0c: iomem range 0xfc000-0xfffff could not be reserved [ 2.365144] system 00:0c: iomem range 0xcfff0000-0xcfffffff could not be reserved [ 2.365147] system 00:0c: iomem range 0xffff0000-0xffffffff has been reserved [ 2.365149] system 00:0c: iomem range 0x0-0x9ffff could not be reserved [ 2.365152] system 00:0c: iomem range 0x100000-0xcffeffff could not be reserved [ 2.365155] system 00:0c: iomem range 0xfec00000-0xfec00fff could not be reserved [ 2.365158] system 00:0c: iomem range 0xfee00000-0xfee00fff has been reserved [ 2.369898] pci 0000:00:04.0: PCI bridge, secondary bus 0000:01 [ 2.369900] pci 0000:00:04.0: IO window: 0xa000-0xafff [ 2.369904] pci 0000:00:04.0: MEM window: 0xec000000-0xedffffff [ 2.369907] pci 0000:00:04.0: PREFETCH window: 0xee100000-0xee1fffff [ 2.369912] pci 0000:00:09.0: PCI bridge, secondary bus 0000:02 [ 2.369914] pci 0000:00:09.0: IO window: 0xb000-0xbfff [ 2.369917] pci 0000:00:09.0: MEM window: 0xe8000000-0xebffffff [ 2.369920] pci 0000:00:09.0: PREFETCH window: 0x000000d0000000-0x000000dfffffff [ 2.369928] pci 0000:00:04.0: setting latency timer to 64 [ 2.369932] pci 0000:00:09.0: setting latency timer to 64 [ 2.369936] pci_bus 0000:00: resource 0 io: [0x00-0xffff] [ 2.369938] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff] [ 2.369941] pci_bus 0000:01: resource 0 io: [0xa000-0xafff] [ 2.369943] pci_bus 0000:01: resource 1 mem: [0xec000000-0xedffffff] [ 2.369945] pci_bus 0000:01: resource 2 pref mem [0xee100000-0xee1fffff] [ 2.369947] pci_bus 0000:01: resource 3 io: [0x00-0xffff] [ 2.369950] pci_bus 0000:01: resource 4 mem: [0x000000-0xffffffffffffffff] [ 2.369953] pci_bus 0000:02: resource 0 io: [0xb000-0xbfff] [ 2.369955] pci_bus 0000:02: resource 1 mem: [0xe8000000-0xebffffff] [ 2.369957] pci_bus 0000:02: resource 2 pref mem [0xd0000000-0xdfffffff] [ 2.369991] NET: Registered protocol family 2 [ 2.370159] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 2.371517] TCP established hash table entries: 524288 (order: 11, 8388608 bytes) [ 2.375325] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 2.375825] TCP: Hash tables configured (established 524288 bind 65536) [ 2.375828] TCP reno registered [ 2.375927] NET: Registered protocol family 1 [ 2.400969] pci 0000:00:00.0: Found enabled HT MSI Mapping [ 2.401015] pci 0000:00:00.0: Found enabled HT MSI Mapping [ 2.401070] pci 0000:00:00.0: Found enabled HT MSI Mapping [ 2.401125] pci 0000:00:00.0: Found enabled HT MSI Mapping [ 2.401183] pci 0000:00:00.0: Found enabled HT MSI Mapping [ 2.401202] pci 0000:02:00.0: Boot video device [ 2.401318] PCI-DMA: Disabling AGP. [ 2.401402] PCI-DMA: aperture base @ 20000000 size 65536 KB [ 2.401404] PCI-DMA: using GART IOMMU. [ 2.401407] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture [ 2.402070] Scanning for low memory corruption every 60 seconds [ 2.402203] audit: initializing netlink socket (disabled) [ 2.402216] type=2000 audit(1271938882.400:1): initialized [ 2.409902] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 2.411174] VFS: Disk quotas dquot_6.5.2 [ 2.411222] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 2.411786] fuse init (API version 7.13) [ 2.411861] msgmni has been set to 7925 [ 2.412068] alg: No test for stdrng (krng) [ 2.412120] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 2.412122] io scheduler noop registered [ 2.412124] io scheduler anticipatory registered [ 2.412125] io scheduler deadline registered [ 2.412160] io scheduler cfq registered (default) [ 2.412289] alloc irq_desc for 24 on node 0 [ 2.412291] alloc kstat_irqs on node 0 [ 2.412298] pcieport 0000:00:09.0: irq 24 for MSI/MSI-X [ 2.412303] pcieport 0000:00:09.0: setting latency timer to 64 [ 2.412358] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 2.412379] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 2.412471] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 [ 2.412474] ACPI: Power Button [PWRB] [ 2.412527] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 2.412529] ACPI: Power Button [PWRF] [ 2.412848] processor LNXCPU:00: registered as cooling_device0 [ 2.412876] processor LNXCPU:01: registered as cooling_device1 [ 2.417001] Linux agpgart interface v0.103 [ 2.417033] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 2.417128] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 2.417381] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 2.418275] brd: module loaded [ 2.418687] loop: module loaded [ 2.418769] input: Macintosh mouse button emulation as /devices/virtual/input/input2 [ 2.418990] pata_acpi 0000:00:06.0: setting latency timer to 64 [ 2.419312] ACPI: PCI Interrupt Link [APSI] enabled at IRQ 23 [ 2.419316] alloc irq_desc for 23 on node 0 [ 2.419318] alloc kstat_irqs on node 0 [ 2.419324] pata_acpi 0000:00:08.0: PCI INT A -> Link[APSI] -> GSI 23 (level, low) -> IRQ 23 [ 2.419348] pata_acpi 0000:00:08.0: setting latency timer to 64 [ 2.419354] pata_acpi 0000:00:08.0: PCI INT A disabled [ 2.419643] Fixed MDIO Bus: probed [ 2.419674] PPP generic driver version 2.4.2 [ 2.419720] tun: Universal TUN/TAP device driver, 1.6 [ 2.419722] tun: (C) 1999-2004 Max Krasnyansky [ 2.419801] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 2.420146] ACPI: PCI Interrupt Link [APCL] enabled at IRQ 22 [ 2.420148] alloc irq_desc for 22 on node 0 [ 2.420150] alloc kstat_irqs on node 0 [ 2.420154] ehci_hcd 0000:00:02.1: PCI INT B -> Link[APCL] -> GSI 22 (level, low) -> IRQ 22 [ 2.420179] ehci_hcd 0000:00:02.1: setting latency timer to 64 [ 2.420182] ehci_hcd 0000:00:02.1: EHCI Host Controller [ 2.420214] ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 1 [ 2.420241] ehci_hcd 0000:00:02.1: debug port 1 [ 2.420248] ehci_hcd 0000:00:02.1: cache line size of 64 is not supported [ 2.420265] ehci_hcd 0000:00:02.1: irq 22, io mem 0xee007000 [ 2.440030] ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00 [ 2.440101] usb usb1: configuration #1 chosen from 1 choice [ 2.440129] hub 1-0:1.0: USB hub found [ 2.440136] hub 1-0:1.0: 8 ports detected [ 2.440198] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 2.440503] ACPI: PCI Interrupt Link [APCF] enabled at IRQ 21 [ 2.440505] alloc irq_desc for 21 on node 0 [ 2.440507] alloc kstat_irqs on node 0 [ 2.440511] ohci_hcd 0000:00:02.0: PCI INT A -> Link[APCF] -> GSI 21 (level, low) -> IRQ 21 [ 2.440522] ohci_hcd 0000:00:02.0: setting latency timer to 64 [ 2.440525] ohci_hcd 0000:00:02.0: OHCI Host Controller [ 2.440558] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2 [ 2.440579] ohci_hcd 0000:00:02.0: irq 21, io mem 0xee006000 [ 2.502070] usb usb2: configuration #1 chosen from 1 choice [ 2.502095] hub 2-0:1.0: USB hub found [ 2.502102] hub 2-0:1.0: 8 ports detected [ 2.502153] uhci_hcd: USB Universal Host Controller Interface driver [ 2.502219] PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1 [ 2.502221] PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp [ 2.502355] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 2.502419] mice: PS/2 mouse device common for all mice [ 2.502507] rtc_cmos 00:05: RTC can wake from S4 [ 2.502544] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0 [ 2.502576] rtc0: alarms up to one year, y3k, 242 bytes nvram, hpet irqs [ 2.502687] device-mapper: uevent: version 1.0.3 [ 2.502815] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com [ 2.502876] device-mapper: multipath: version 1.1.0 loaded [ 2.502878] device-mapper: multipath round-robin: version 1.0.0 loaded [ 2.503021] cpuidle: using governor ladder [ 2.503023] cpuidle: using governor menu [ 2.503345] TCP cubic registered [ 2.503455] NET: Registered protocol family 10 [ 2.503881] lo: Disabled Privacy Extensions [ 2.504134] NET: Registered protocol family 17 [ 2.504168] powernow-k8: Found 1 AMD Processor model unknown processors (2 cpu cores) (version 2.20.00) [ 2.504177] [Firmware Bug]: powernow-k8: No compatible ACPI _PSS objects found. [ 2.504178] [Firmware Bug]: powernow-k8: Try again with latest BIOS. [ 2.504273] PM: Resume from disk failed. [ 2.504292] registered taskstats version 1 [ 2.504536] Magic number: 6:734:380 [ 2.504625] rtc_cmos 00:05: setting system clock to 2010-04-22 12:21:22 UTC (1271938882) [ 2.504628] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 2.504630] EDD information not available. [ 2.504679] Freeing unused kernel memory: 876k freed [ 2.505076] Write protecting the kernel read-only data: 7676k [ 2.519489] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3 [ 2.526752] udev: starting version 151 [ 2.603185] pata_amd 0000:00:06.0: version 0.4.1 [ 2.603224] pata_amd 0000:00:06.0: setting latency timer to 64 [ 2.618784] scsi0 : pata_amd [ 2.627683] scsi1 : pata_amd [ 2.628268] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000 irq 14 [ 2.628270] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xf008 irq 15 [ 2.632466] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.64. [ 2.632782] ACPI: PCI Interrupt Link [APCH] enabled at IRQ 20 [ 2.632787] alloc irq_desc for 20 on node 0 [ 2.632789] alloc kstat_irqs on node 0 [ 2.632796] forcedeth 0000:00:07.0: PCI INT A -> Link[APCH] -> GSI 20 (level, low) -> IRQ 20 [ 2.632800] forcedeth 0000:00:07.0: setting latency timer to 64 [ 2.633459] [drm] Initialized drm 1.1.0 20060810 [ 2.637101] ACPI: PCI Interrupt Link [APC1] enabled at IRQ 16 [ 2.637105] alloc irq_desc for 16 on node 0 [ 2.637106] alloc kstat_irqs on node 0 [ 2.637112] skge 0000:01:06.0: PCI INT A -> Link[APC1] -> GSI 16 (level, low) -> IRQ 16 [ 2.637160] skge 1.13 addr 0xed000000 irq 16 chip Yukon-Lite rev 9 [ 2.637729] skge eth0: addr 00:24:01:14:e3:ce [ 2.791078] ata2: port disabled. ignoring. [ 2.816355] ACPI: PCI Interrupt Link [APC8] enabled at IRQ 16 [ 2.816361] nouveau 0000:02:00.0: PCI INT A -> Link[APC8] -> GSI 16 (level, low) -> IRQ 16 [ 2.816365] nouveau 0000:02:00.0: setting latency timer to 64 [ 2.819156] [drm] nouveau 0000:02:00.0: Detected an NV50 generation card (0x092980a2) [ 2.820392] [drm] nouveau 0000:02:00.0: Attempting to load BIOS image from PRAMIN [ 2.831281] usb 1-4: new high speed USB device using ehci_hcd and address 3 [ 2.874976] [drm] nouveau 0000:02:00.0: ... appears to be valid [ 2.874980] [drm] nouveau 0000:02:00.0: BIT BIOS found [ 2.874982] [drm] nouveau 0000:02:00.0: Bios version 62.92.6d.00 [ 2.874985] [drm] nouveau 0000:02:00.0: TMDS table revision 2.0 not currently supported [ 2.874988] [drm] nouveau 0000:02:00.0: Found Display Configuration Block version 4.0 [ 2.874991] [drm] nouveau 0000:02:00.0: DCB connector table: VHER 0x40 5 16 4 [ 2.874994] [drm] nouveau 0000:02:00.0: 0: 0x00001030: type 0x30 idx 0 tag 0x07 [ 2.874996] [drm] nouveau 0000:02:00.0: 1: 0x00002130: type 0x30 idx 1 tag 0x08 [ 2.874999] [drm] nouveau 0000:02:00.0: 2: 0x00000210: type 0x10 idx 2 tag 0xff [ 2.875001] [drm] nouveau 0000:02:00.0: 3: 0x00000211: type 0x11 idx 2 tag 0xff [ 2.875003] [drm] nouveau 0000:02:00.0: 4: 0x00000213: type 0x13 idx 2 tag 0xff [ 2.875006] [drm] nouveau 0000:02:00.0: Raw DCB entry 0: 02000300 00000028 [ 2.875009] [drm] nouveau 0000:02:00.0: Raw DCB entry 1: 01000302 00020030 [ 2.875011] [drm] nouveau 0000:02:00.0: Raw DCB entry 2: 04011310 00000028 [ 2.875013] [drm] nouveau 0000:02:00.0: Raw DCB entry 3: 02011312 00020030 [ 2.875015] [drm] nouveau 0000:02:00.0: Raw DCB entry 4: 010223f1 00c0c083 [ 2.875022] [drm] nouveau 0000:02:00.0: Parsing VBIOS init table 0 at offset 0xC5D1 [ 2.960128] [drm] nouveau 0000:02:00.0: Parsing VBIOS init table 1 at offset 0xCB70 [ 2.986632] usb 1-4: configuration #1 chosen from 1 choice [ 3.000019] [drm] nouveau 0000:02:00.0: Parsing VBIOS init table 2 at offset 0xD941 [ 3.000029] [drm] nouveau 0000:02:00.0: Parsing VBIOS init table 3 at offset 0xDA3F [ 3.020094] [drm] nouveau 0000:02:00.0: Parsing VBIOS init table 4 at offset 0xDCA7 [ 3.020097] [drm] nouveau 0000:02:00.0: Parsing VBIOS init table at offset 0xDD0C [ 3.050018] [drm] nouveau 0000:02:00.0: 0xDD0C: Condition still not met after 20ms, skipping following opcodes [ 3.050025] [drm] nouveau 0000:02:00.0: 0xB78A: parsing output script 0 [ 3.050028] [drm] nouveau 0000:02:00.0: 0xB78A: parsing output script 0 [ 3.050030] [drm] nouveau 0000:02:00.0: 0xA34C: parsing output script 0 [ 3.132441] [TTM] Zone kernel: Available graphics memory: 2029316 kiB. [ 3.132451] [drm] nouveau 0000:02:00.0: 512 MiB VRAM [ 3.142024] [drm] nouveau 0000:02:00.0: 512 MiB GART (aperture) [ 3.142390] [drm] nouveau 0000:02:00.0: Allocating FIFO number 1 [ 3.145028] [drm] nouveau 0000:02:00.0: nouveau_channel_alloc: initialised FIFO 1 [ 3.145464] [drm] nouveau 0000:02:00.0: Detected a DAC output [ 3.145467] [drm] nouveau 0000:02:00.0: Detected a TMDS output [ 3.145469] [drm] nouveau 0000:02:00.0: Detected a DAC output [ 3.145471] [drm] nouveau 0000:02:00.0: Detected a TMDS output [ 3.145473] [drm] nouveau 0000:02:00.0: DCB encoder 1 unknown [ 3.145476] [drm] nouveau 0000:02:00.0: Detected a DVI-I connector [ 3.145532] [drm] nouveau 0000:02:00.0: Detected a DVI-I connector [ 3.172060] forcedeth 0000:00:07.0: ifname eth1, PHY OUI 0x732 @ 1, addr 00:1d:7d:ba:90:5e [ 3.172064] forcedeth 0000:00:07.0: highdma pwrctl mgmt lnktim msi desc-v3 [ 3.172300] sata_nv 0000:00:08.0: version 3.5 [ 3.172312] sata_nv 0000:00:08.0: PCI INT A -> Link[APSI] -> GSI 23 (level, low) -> IRQ 23 [ 3.172360] sata_nv 0000:00:08.0: setting latency timer to 64 [ 3.180064] scsi2 : sata_nv [ 3.180127] scsi3 : sata_nv [ 3.180299] ata3: SATA max UDMA/133 cmd 0x9f0 ctl 0xbf0 bmdma 0xdc00 irq 23 [ 3.180302] ata4: SATA max UDMA/133 cmd 0x970 ctl 0xb70 bmdma 0xdc08 irq 23 [ 3.321266] usb 2-3: new low speed USB device using ohci_hcd and address 2 [ 3.326825] [drm] nouveau 0000:02:00.0: allocated 1920x1200 fb: 0x40250000, bo ffff88012a2d0e00 [ 3.326887] fb0: nouveaufb frame buffer device [ 3.326889] registered panic notifier [ 3.326893] [drm] Initialized nouveau 0.0.15 20090420 for 0000:02:00.0 on minor 0 [ 3.551096] usb 2-3: configuration #1 chosen from 1 choice [ 3.670039] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 3.900103] ata3.00: HPA unlocked: 312579695 -> 312581808, native 312581808 [ 3.900108] ata3.00: ATA-7: ST3160815AS, 4.AAB, max UDMA/133 [ 3.900111] ata3.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 0/32) [ 3.968594] ata3.00: configured for UDMA/133 [ 3.968691] scsi 2:0:0:0: Direct-Access ATA ST3160815AS 4.AA PQ: 0 ANSI: 5 [ 3.968849] sd 2:0:0:0: Attached scsi generic sg0 type 0 [ 3.969037] sd 2:0:0:0: [sda] 312581808 512-byte logical blocks: (160 GB/149 GiB) [ 3.969080] sd 2:0:0:0: [sda] Write Protect is off [ 3.969082] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 3.969104] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 3.969224] sda: sda1 sda2 [ 4.040085] sd 2:0:0:0: [sda] Attached SCSI disk [ 4.450033] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 4.470116] ata4.00: ATAPI: TSSTcorp CDDVDW SH-S203D, SB00, max UDMA/100 [ 4.510131] ata4.00: configured for UDMA/100 [ 4.511051] scsi 3:0:0:0: CD-ROM TSSTcorp CDDVDW SH-S203D SB00 PQ: 0 ANSI: 5 [ 4.514334] sr0: scsi3-mmc drive: 125x/125x writer dvd-ram cd/rw xa/form2 cdda tray [ 4.514337] Uniform CD-ROM driver Revision: 3.20 [ 4.514427] sr 3:0:0:0: Attached scsi CD-ROM sr0 [ 4.514480] sr 3:0:0:0: Attached scsi generic sg1 type 5 [ 4.519656] vga16fb: initializing [ 4.519661] vga16fb: mapped to 0xffff8800000a0000 [ 4.519666] vga16fb: not registering due to another framebuffer present [ 4.521145] usbcore: registered new interface driver hiddev [ 4.527347] input: Powered by Avago Laser Gaming Mouse as /devices/pci0000:00/0000:00:02.0/usb2/2-3/2-3:1.0/input/input4 [ 4.527437] generic-usb 0003:0957:0006.0001: input,hidraw0: USB HID v1.10 Mouse [Powered by Avago Laser Gaming Mouse] on usb-0000:00:02.0-3/input0 [ 4.527462] usbcore: registered new interface driver usbhid [ 4.527465] usbhid: v2.6:USB HID core driver [ 4.530134] Console: switching to colour frame buffer device 240x75 [ 4.530149] [drm] nouveau 0000:02:00.0: 0xB78E: parsing output script 1 [ 4.530167] [drm] nouveau 0000:02:00.0: 0xB78F: parsing output script 2 [ 4.530188] [drm] nouveau 0000:02:00.0: 0xB5C9: parsing clock script 0 [ 5.868221] xor: automatically using best checksumming function: generic_sse [ 5.911254] generic_sse: 7851.200 MB/sec [ 5.911256] xor: using function: generic_sse (7851.200 MB/sec) [ 5.913503] device-mapper: dm-raid45: initialized v0.2594b [ 6.067621] EXT4-fs (sda1): mounted filesystem with ordered data mode [ 7.610351] ISO 9660 Extensions: Microsoft Joliet Level 3 [ 7.677984] ISO 9660 Extensions: RRIP_1991A [ 7.933054] aufs 2-standalone.tree-20091207 [ 8.076822] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 98.284790] Adding 7847744k swap on /dev/sda2. Priority:-1 extents:1 across:7847744k [ 98.720158] udev: starting version 151 [ 101.955032] k8temp 0000:00:18.3: Temperature readouts might be wrong - check erratum #141 [ 102.108365] EDAC MC: Ver: 2.1.0 Apr 1 2010 [ 102.206689] i2c i2c-2: nForce2 SMBus adapter at 0x1c00 [ 102.207398] i2c i2c-3: nForce2 SMBus adapter at 0x1c40 [ 102.213607] EDAC amd64_edac: Ver: 3.2.0 Apr 1 2010 [ 102.242347] EDAC amd64: This node reports that Memory ECC is currently disabled, set F3x44[22] (0000:00:18.3). [ 102.242357] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load. [ 102.242359] Either enable ECC checking or force module loading by setting 'ecc_enable_override'. [ 102.242360] (Note that use of the override may cause unknown side effects.) [ 102.242380] amd64_edac: probe of 0000:00:18.2 failed with error -22 [ 102.303052] cfg80211: Calling CRDA to update world regulatory domain [ 103.378809] parport_pc 00:09: reported by Plug and Play ACPI [ 103.378855] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE] [ 103.962441] ppdev: user-space parallel port driver [ 103.974709] phy0: Selected rate control algorithm 'minstrel' [ 103.975388] phy0: hwaddr 00:e0:09:08:05:11, RTL8187vB (default) V1 + rtl8225z2, rfkill mask 2 [ 103.986553] rtl8187: Customer ID is 0x00 [ 103.986605] Registered led device: rtl8187-phy0::tx [ 103.986622] Registered led device: rtl8187-phy0::rx [ 103.987041] rtl8187: wireless switch is on [ 103.987068] usbcore: registered new interface driver rtl8187 [ 104.694092] cfg80211: World regulatory domain updated: [ 104.694096] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 104.694099] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 104.694102] (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 104.694104] (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 104.694106] (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 104.694108] (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 106.191205] ACPI: PCI Interrupt Link [AAZA] enabled at IRQ 23 [ 106.191212] HDA Intel 0000:00:05.0: PCI INT B -> Link[AAZA] -> GSI 23 (level, low) -> IRQ 23 [ 106.191281] HDA Intel 0000:00:05.0: setting latency timer to 64 [ 106.202518] ACPI: PCI Interrupt Link [APC3] enabled at IRQ 18 [ 106.202525] alloc irq_desc for 18 on node 0 [ 106.202526] alloc kstat_irqs on node 0 [ 106.202534] EMU10K1_Audigy 0000:01:08.0: PCI INT A -> Link[APC3] -> GSI 18 (level, low) -> IRQ 18 [ 106.205317] Audigy2 value: Special config. [ 107.921339] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 107.952077] skge eth0: enabling interface [ 107.955684] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 107.958280] alloc irq_desc for 25 on node 0 [ 107.958284] alloc kstat_irqs on node 0 [ 107.958292] forcedeth 0000:00:07.0: irq 25 for MSI/MSI-X [ 107.958477] eth1: no link during initialization. [ 107.959279] ADDRCONF(NETDEV_UP): eth1: link is not ready [ 107.960143] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:05.0/input/input5 [ 111.195937] cfg80211: Found new beacon on frequency: 2472 MHz (Ch 13) on phy0