[ 14.566939] lp0: using parport0 (interrupt-driven). [ 15.202368] r8169: eth0: link up [ 15.202372] r8169: eth0: link up [ 15.703026] sdd1 [ 15.707523] sd 8:0:0:0: [sdd] Assuming drive cache: write through [ 15.707570] sd 8:0:0:0: [sdd] Attached SCSI disk [ 16.137109] ip_tables: (C) 2000-2006 Netfilter Core Team [ 16.823957] alloc irq_desc for 22 on node 0 [ 16.823959] alloc kstat_irqs on node 0 [ 16.823965] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 [ 16.824002] HDA Intel 0000:00:1b.0: setting latency timer to 64 [ 16.945545] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input3 [ 18.270775] CPU0 attaching NULL sched-domain. [ 18.270779] CPU1 attaching NULL sched-domain. [ 18.301338] CPU0 attaching sched-domain: [ 18.301342] domain 0: span 0-1 level MC [ 18.301346] groups: 0 1 [ 18.301350] domain 1: span 0-1 level CPU [ 18.301353] groups: 0-1 (__cpu_power = 2048) [ 18.301359] CPU1 attaching sched-domain: [ 18.301367] domain 0: span 0-1 level MC [ 18.301368] groups: 1 0 [ 18.301371] domain 1: span 0-1 level CPU [ 18.301373] groups: 0-1 (__cpu_power = 2048) [ 19.076985] i2c-adapter i2c-1: unable to read EDID block. [ 19.076988] i915 0000:00:02.0: HDMI Type A-1: no EDID data [ 19.081459] i2c-adapter i2c-1: unable to read EDID block. [ 19.081462] i915 0000:00:02.0: HDMI Type A-1: no EDID data [ 19.880884] i2c-adapter i2c-1: unable to read EDID block. [ 19.880888] i915 0000:00:02.0: HDMI Type A-1: no EDID data [ 19.885425] i2c-adapter i2c-1: unable to read EDID block. [ 19.885427] i915 0000:00:02.0: HDMI Type A-1: no EDID data [ 20.879471] [drm] TMDS-12: set mode 1360x768 2f [ 25.690008] eth0: no IPv6 routers present [ 32.391313] usb 7-1: configuration #1 chosen from 1 choice [ 32.398162] usbcore: registered new interface driver hiddev [ 32.670012] usb 8-2: new full speed USB device using uhci_hcd and address 2 [ 32.859477] usb 8-2: configuration #1 chosen from 1 choice [ 32.862422] hub 8-2:1.0: USB hub found [ 32.864389] hub 8-2:1.0: 3 ports detected [ 32.951030] usb 6-1.2: new full speed USB device using uhci_hcd and address 3 [ 33.109112] usb 6-1.2: configuration #1 chosen from 1 choice [ 33.201029] usb 6-1.3: new full speed USB device using uhci_hcd and address 4 [ 33.358114] usb 6-1.3: configuration #1 chosen from 1 choice [ 33.441394] usb 8-2.2: new full speed USB device using uhci_hcd and address 3 [ 33.598483] usb 8-2.2: configuration #1 chosen from 1 choice [ 33.681394] usb 8-2.3: new full speed USB device using uhci_hcd and address 4 [ 33.838480] usb 8-2.3: configuration #1 chosen from 1 choice [ 42.451354] generic-usb 0003:0D9F:0001.0001: hiddev96,hidraw0: USB HID v1.00 Device [HID 0d9f:0001] on usb-0000:00:1d.1-1/input0 [ 42.457328] input: Logitech Logitech BT Mini-Receiver as /devices/pci0000:00/0000:00:1d.0/usb6/6-1/6-1.2/6-1.2:1.0/input/input4 [ 42.457380] generic-usb 0003:046D:C713.0002: input,hidraw1: USB HID v1.11 Keyboard [Logitech Logitech BT Mini-Receiver] on usb-0000:00:1d.0-1.2/input0 [ 42.465668] input: Logitech Logitech BT Mini-Receiver as /devices/pci0000:00/0000:00:1d.2/usb8/8-2/8-2.2/8-2.2:1.0/input/input5 [ 42.465707] generic-usb 0003:046D:C71E.0004: input,hidraw2: USB HID v1.11 Keyboard [Logitech Logitech BT Mini-Receiver] on usb-0000:00:1d.2-2.2/input0 [ 42.468483] usbcore: registered new interface driver usbhid [ 42.468487] usbhid: v2.6:USB HID core driver [ 42.484818] input: Logitech Logitech BT Mini-Receiver as /devices/pci0000:00/0000:00:1d.0/usb6/6-1/6-1.3/6-1.3:1.0/input/input6 [ 42.484912] logitech 0003:046D:C714.0003: input,hiddev97,hidraw3: USB HID v1.11 Mouse [Logitech Logitech BT Mini-Receiver] on usb-0000:00:1d.0-1.3/input0 [ 42.494756] input: Logitech Logitech BT Mini-Receiver as /devices/pci0000:00/0000:00:1d.2/usb8/8-2/8-2.3/8-2.3:1.0/input/input7 [ 42.494857] logitech 0003:046D:C71F.0005: input,hiddev98,hidraw4: USB HID v1.11 Mouse [Logitech Logitech BT Mini-Receiver] on usb-0000:00:1d.2-2.3/input0 [ 42.778167] CPU0 attaching NULL sched-domain. [ 42.778172] CPU1 attaching NULL sched-domain. [ 42.820088] CPU0 attaching sched-domain: [ 42.820092] domain 0: span 0-1 level MC [ 42.820094] groups: 0 1 [ 42.820098] CPU1 attaching sched-domain: [ 42.820100] domain 0: span 0-1 level MC [ 42.820102] groups: 1 0 [ 42.974809] i2c-adapter i2c-1: unable to read EDID block. [ 42.974812] i915 0000:00:02.0: HDMI Type A-1: no EDID data [ 42.979233] i2c-adapter i2c-1: unable to read EDID block. [ 42.979234] i915 0000:00:02.0: HDMI Type A-1: no EDID data [ 43.726211] i2c-adapter i2c-1: unable to read EDID block. [ 43.726213] i915 0000:00:02.0: HDMI Type A-1: no EDID data [ 43.730640] i2c-adapter i2c-1: unable to read EDID block. [ 43.730642] i915 0000:00:02.0: HDMI Type A-1: no EDID data [ 44.506213] i2c-adapter i2c-1: unable to read EDID block. [ 44.506216] i915 0000:00:02.0: HDMI Type A-1: no EDID data [ 44.510641] i2c-adapter i2c-1: unable to read EDID block. [ 44.510643] i915 0000:00:02.0: HDMI Type A-1: no EDID data [ 59.841849] i2c-adapter i2c-1: unable to read EDID block. [ 59.841853] i915 0000:00:02.0: HDMI Type A-1: no EDID data [ 59.846509] i2c-adapter i2c-1: unable to read EDID block. [ 59.846511] i915 0000:00:02.0: HDMI Type A-1: no EDID data [ 60.596273] i2c-adapter i2c-1: unable to read EDID block. [ 60.596276] i915 0000:00:02.0: HDMI Type A-1: no EDID data [ 60.600702] i2c-adapter i2c-1: unable to read EDID block. [ 60.600704] i915 0000:00:02.0: HDMI Type A-1: no EDID data [ 61.346274] i2c-adapter i2c-1: unable to read EDID block. [ 61.346278] i915 0000:00:02.0: HDMI Type A-1: no EDID data [ 61.350702] i2c-adapter i2c-1: unable to read EDID block. [ 61.350704] i915 0000:00:02.0: HDMI Type A-1: no EDID data [ 63.357156] i2c-adapter i2c-1: unable to read EDID block. [ 63.357159] i915 0000:00:02.0: HDMI Type A-1: no EDID data [ 63.361584] i2c-adapter i2c-1: unable to read EDID block. [ 63.361586] i915 0000:00:02.0: HDMI Type A-1: no EDID data [ 1874.011277] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen [ 1874.011288] ata3.00: cmd b0/d1:01:00:4f:c2/00:00:00:00:00/00 tag 0 pio 512 in [ 1874.011290] res 40/00:78:00:00:00/00:00:00:00:00/40 Emask 0x4 (timeout) [ 1874.011293] ata3.00: status: { DRDY } [ 1874.011299] ata3: hard resetting link [ 1874.540067] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1874.545183] ata3.00: configured for UDMA/133 [ 1874.545200] ata3: EH complete [ 2148.463256] __ratelimit: 30 callbacks suppressed [ 2148.463262] compiz.real[2059]: segfault at 4c63cf20 ip 00000000004122ba sp 00007fffee08edf0 error 4 in compiz.real[400000+3c000] [ 3674.011405] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen [ 3674.011416] ata3.00: cmd b0/d1:01:00:4f:c2/00:00:00:00:00/00 tag 0 pio 512 in [ 3674.011418] res 40/00:00:00:4f:c2/00:00:00:c2:00/00 Emask 0x4 (timeout) [ 3674.011421] ata3.00: status: { DRDY } [ 3674.011426] ata3: hard resetting link [ 3674.548257] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 3674.558713] ata3.00: configured for UDMA/133 [ 3674.558730] ata3: EH complete [ 5474.040030] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen [ 5474.040041] ata3.00: cmd b0/d1:01:00:4f:c2/00:00:00:00:00/00 tag 0 pio 512 in [ 5474.040043] res 40/00:00:00:4f:c2/00:00:00:c2:00/00 Emask 0x4 (timeout) [ 5474.040046] ata3.00: status: { DRDY } [ 5474.040052] ata3: hard resetting link [ 5474.571269] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 5474.576339] ata3.00: configured for UDMA/133 [ 5474.576352] ata3: EH complete [ 7274.040033] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen [ 7274.040044] ata3.00: cmd b0/d1:01:00:4f:c2/00:00:00:00:00/00 tag 0 pio 512 in [ 7274.040045] res 40/00:00:00:4f:c2/00:00:00:c2:00/00 Emask 0x4 (timeout) [ 7274.040049] ata3.00: status: { DRDY } [ 7274.040055] ata3: hard resetting link [ 7274.572627] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 7274.579979] ata3.00: configured for UDMA/133 [ 7274.579995] ata3: EH complete [ 9074.040465] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen [ 9074.040476] ata3.00: cmd b0/d1:01:00:4f:c2/00:00:00:00:00/00 tag 0 pio 512 in [ 9074.040477] res 40/00:00:00:4f:c2/00:00:00:c2:00/00 Emask 0x4 (timeout) [ 9074.040481] ata3.00: status: { DRDY } [ 9074.040486] ata3: hard resetting link [ 9074.571282] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 9074.576514] ata3.00: configured for UDMA/133 [ 9074.576530] ata3: EH complete [10874.011276] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen [10874.011287] ata3.00: cmd b0/d1:01:00:4f:c2/00:00:00:00:00/00 tag 0 pio 512 in [10874.011289] res 40/00:00:00:4f:c2/00:00:00:c2:00/00 Emask 0x4 (timeout) [10874.011292] ata3.00: status: { DRDY } [10874.011298] ata3: hard resetting link [10874.541271] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [10874.546762] ata3.00: configured for UDMA/133 [10874.546779] ata3: EH complete [12674.011446] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen [12674.011456] ata3.00: cmd b0/d1:01:00:4f:c2/00:00:00:00:00/00 tag 0 pio 512 in [12674.011458] res 40/00:00:00:4f:c2/00:00:00:c2:00/00 Emask 0x4 (timeout) [12674.011461] ata3.00: status: { DRDY } [12674.011467] ata3: hard resetting link [12674.541282] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [12674.546412] ata3.00: configured for UDMA/133 [12674.546427] ata3: EH complete [14474.050053] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen [14474.050064] ata3.00: cmd b0/d1:01:00:4f:c2/00:00:00:00:00/00 tag 0 pio 512 in [14474.050065] res 40/00:00:00:4f:c2/00:00:00:c2:00/00 Emask 0x4 (timeout) [14474.050069] ata3.00: status: { DRDY } [14474.050074] ata3: hard resetting link [14474.570028] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [14474.575348] ata3.00: configured for UDMA/133 [14474.575364] ata3: EH complete [16274.011275] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen [16274.011286] ata3.00: cmd b0/d1:01:00:4f:c2/00:00:00:00:00/00 tag 0 pio 512 in [16274.011287] res 40/00:00:00:4f:c2/00:00:00:c2:00/00 Emask 0x4 (timeout) [16274.011291] ata3.00: status: { DRDY } [16274.011296] ata3: hard resetting link [16274.540049] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [16274.545136] ata3.00: configured for UDMA/133 [16274.545152] ata3: EH complete [16342.651686] BUG: unable to handle kernel paging request at ffff88ffcfd9e258 [16342.651694] IP: [] set_page_dirty+0x1c/0x60 [16342.651705] PGD 0 [16342.651709] Oops: 0000 [#1] SMP [16342.651713] last sysfs file: /sys/devices/pci0000:00/0000:00:1f.2/host1/target1:0:0/1:0:0:0/block/sda/uevent [16342.651717] CPU 0 [16342.651719] Modules linked in: joydev hid_logitech ff_memless usbhid binfmt_misc snd_hda_codec_intelhdmi snd_hda_codec_realtek snd_hda_intel snd_hda_codec snd_hwdep snd_pcm_oss snd_mixer_oss snd_pcm snd_seq_dummy snd_seq_oss snd_seq_midi snd_rawmidi snd_seq_midi_event snd_seq snd_timer snd_seq_device iptable_filter ip_tables snd soundcore lp ppdev psmouse serio_raw parport_pc parport asus_atk0110 x_tables snd_page_alloc dm_raid45 xor fbcon tileblit font bitblit softcursor ohci1394 r8169 mii ieee1394 usb_storage i915 drm i2c_algo_bit intel_agp video output [16342.651768] Pid: 2307, comm: rsync Not tainted 2.6.31-14-generic #48-Ubuntu System Product Name [16342.651771] RIP: 0010:[] [] set_page_dirty+0x1c/0x60 [16342.651777] RSP: 0018:ffff8800378a7c78 EFLAGS: 00010286 [16342.651780] RAX: ffff88ffcfd9e200 RBX: ffff8800d798c068 RCX: 000000000000000a [16342.651783] RDX: 0100000000100000 RSI: 000000000340d000 RDI: ffffea00025208d0 [16342.651786] RBP: ffff8800378a7c78 R08: ffff8800d0d40000 R09: ffff8800378a7e20 [16342.651789] R10: 0000000000000001 R11: 0000000000000000 R12: 000000000340d000 [16342.651792] R13: ffff8800378a7e20 R14: ffffea00025208d0 R15: ffff88002802d9c0 [16342.651795] FS: 0000000000000000(0000) GS:ffff88002801f000(0000) knlGS:0000000000000000 [16342.651798] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [16342.651801] CR2: ffff88ffcfd9e258 CR3: 0000000001001000 CR4: 00000000000006f0 [16342.651804] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [16342.651807] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 [16342.651811] Process rsync (pid: 2307, threadinfo ffff8800378a6000, task ffff880117b296b0) [16342.651813] Stack: [16342.651815] ffff8800378a7d28 ffffffff810f5dfb ffffea0003c13850 000000000000000c [16342.651820] <0> ffff8800378a7d78 ffffffff810e5344 ffff8800378a7cb8 ffffffff00000067 [16342.651825] <0> ffff88002802d9d8 80000000a9b96067 000000000000000c fffffff300000000 [16342.651831] Call Trace: [16342.651836] [] zap_pte_range+0x37b/0x400 [16342.651840] [] ? release_pages+0x234/0x260 [16342.651844] [] unmap_page_range+0x1c0/0x290 [16342.651848] [] unmap_vmas+0x167/0x2f0 [16342.651853] [] exit_mmap+0xb3/0x190 [16342.651858] [] mmput+0x38/0xd0 [16342.651863] [] exit_mm+0x10e/0x150 [16342.651869] [] ? _spin_lock_irq+0x10/0x20 [16342.651872] [] do_exit+0x125/0x360 [16342.651876] [] do_group_exit+0x49/0xc0 [16342.651880] [] sys_exit_group+0x12/0x20 [16342.651885] [] system_call_fastpath+0x16/0x1b [16342.651888] Code: 00 00 48 83 c4 08 5b c9 c3 66 0f 1f 44 00 00 55 48 8b 17 48 8b 47 18 48 89 e5 f7 c2 00 00 01 00 75 23 a8 01 75 28 48 85 c0 74 23 <48> 8b 40 58 48 c7 c2 80 61 14 81 48 8b 40 20 48 85 c0 48 0f 44 [16342.651930] RIP [] set_page_dirty+0x1c/0x60 [16342.651935] RSP [16342.651937] CR2: ffff88ffcfd9e258 [16342.651940] ---[ end trace 5fe4fb9483c6e0d7 ]--- [16342.651943] Fixing recursive fault but reboot is needed! [18074.040048] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen [18074.040058] ata3.00: cmd b0/d1:01:00:4f:c2/00:00:00:00:00/00 tag 0 pio 512 in [18074.040060] res 40/00:00:00:4f:c2/00:00:00:c2:00/00 Emask 0x4 (timeout) [18074.040063] ata3.00: status: { DRDY } [18074.040069] ata3: hard resetting link [18074.570016] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [18074.575101] ata3.00: configured for UDMA/133 [18074.575119] ata3: EH complete [19874.011280] ata6.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen [19874.011291] ata6.00: cmd b0/d1:01:00:4f:c2/00:00:00:00:00/00 tag 0 pio 512 in [19874.011292] res 40/00:08:3e:39:21/00:00:00:00:00/40 Emask 0x4 (timeout) [19874.011296] ata6.00: status: { DRDY } [19874.011301] ata6: hard resetting link [19874.050016] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen [19874.050024] ata3.00: cmd b0/d1:01:00:4f:c2/00:00:00:00:00/00 tag 0 pio 512 in [19874.050025] res 40/00:00:00:4f:c2/00:00:00:c2:00/00 Emask 0x4 (timeout) [19874.050029] ata3.00: status: { DRDY } [19874.050033] ata3: hard resetting link [19874.580016] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [19874.585114] ata3.00: configured for UDMA/133 [19874.585132] ata3: EH complete [19875.860016] ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [19875.953990] ata6.00: configured for UDMA/133 [19875.954006] ata6: EH complete [21674.011275] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen [21674.011286] ata3.00: cmd b0/d1:01:00:4f:c2/00:00:00:00:00/00 tag 0 pio 512 in [21674.011287] res 40/00:00:00:4f:c2/00:00:00:c2:00/00 Emask 0x4 (timeout) [21674.011291] ata3.00: status: { DRDY } [21674.011296] ata3: hard resetting link [21674.540042] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [21674.545128] ata3.00: configured for UDMA/133 [21674.545142] ata3: EH complete [22851.180023] usb 2-4: USB disconnect, address 4 [23261.932985] UDF-fs: Partition marked readonly; forcing readonly mount [23261.966781] UDF-fs INFO UDF: Mounting volume 'HE_MAN_BEST_OF_SEASON_1', timestamp 2005/05/16 15:31 (1f10)