WARNING: at /build/buildd/linux-2.6.31/kernel/power/suspend_test.c:52 suspend_test_finish+0x7c/0x80()

[Junior]

I send the system into standby, after 5 minutes i forced to get back to work. This worked good. After sending it again into standby and leave it about half an hour in this mode. the system woke up with no display. No terminal could be switch to. So i made a hard reset.

ProblemType: KernelOops
Annotation: Your system might become unstable now and might need to be restarted.
AplayDevices:
 **** List of PLAYBACK Hardware Devices ****
 card 0: SB [HDA ATI SB], device 0: AD198x Analog [AD198x Analog]
   Subdevices: 1/1
   Subdevice #0: subdevice #0
Architecture: amd64
ArecordDevices:
 **** List of CAPTURE Hardware Devices ****
 card 0: SB [HDA ATI SB], device 0: AD198x Analog [AD198x Analog]
   Subdevices: 1/1
   Subdevice #0: subdevice #0
AudioDevicesInUse:
 USER PID ACCESS COMMAND
 /dev/snd/controlC0: likarger 2183 F.... pulseaudio
CRDA: Error: [Errno 2] No such file or directory
Card0.Amixer.info:
 Card hw:0 'SB'/'HDA ATI SB at 0xc8180000 irq 16'
   Mixer name : 'Analog Devices AD1981'
   Components : 'HDA:11d41981,103c30b0,00100200 HDA:14f12bfa,103c30b0,00090000'
   Controls : 11
   Simple ctrls : 9
Date: Sun Oct 18 13:03:34 2009
DistroRelease: Ubuntu 9.10
Failure: oops
Lsusb:
 Bus 002 Device 002: ID 03f0:171d Hewlett-Packard Wireless (Bluetooth + WLAN) Interface [Integrated Module]
 Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
 Bus 003 Device 002: ID 08ff:2580 AuthenTec, Inc. AES2501 Fingerprint Sensor
 Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
 Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
MachineType: Hewlett-Packard HP Compaq nx6325 (EY350EA#ABD)
NonfreeKernelModules: wl
Package: linux-image-2.6.31-14-generic 2.6.31-14.48
PccardctlIdent:
 Socket 0:
   no product info available
PccardctlStatus:
 Socket 0:
   no card
ProcCmdLine: BOOT_IMAGE=/boot/vmlinuz-2.6.31-14-generic root=UUID=d0ec1223-2ad3-4096-ba78-a3773fedceaf ro quiet splash
ProcVersionSignature: Ubuntu 2.6.31-14.48-generic
RelatedPackageVersions:
 linux-backports-modules-2.6.31-14-generic N/A
 linux-firmware 1.23
RfKill:
 0: hci0: Bluetooth
  Soft blocked: no
  Hard blocked: no
SourcePackage: linux
Tags: kernel-oops
Title: WARNING: at /build/buildd/linux-2.6.31/kernel/power/suspend_test.c:52 suspend_test_finish+0x7c/0x80()
Uname: Linux 2.6.31-14-generic x86_64
dmi.bios.date: 05/08/2007
dmi.bios.vendor: Hewlett-Packard
dmi.bios.version: 68TT2 Ver. F.07
dmi.board.name: 30B0
dmi.board.vendor: Hewlett-Packard
dmi.board.version: KBC Version 40.15
dmi.chassis.asset.tag: CNU64837W9
dmi.chassis.type: 10
dmi.chassis.vendor: Hewlett-Packard
dmi.modalias: dmi:bvnHewlett-Packard:bvr68TT2Ver.F.07:bd05/08/2007:svnHewlett-Packard:pnHPCompaqnx6325(EY350EA#ABD):pvrF.07:rvnHewlett-Packard:rn30B0:rvrKBCVersion40.15:cvnHewlett-Packard:ct10:cvr:
dmi.product.name: HP Compaq nx6325 (EY350EA#ABD)
dmi.product.version: F.07
dmi.sys.vendor: Hewlett-Packard

[Leann Ogasawara (leannogasawara)]

Hi Junior,

The warning reported here typically indicates that it took longer for your system to resume from suspend than expected. I believe there is a 5 sec barrier which your system likely exceeded. Typically you'll see something similar to "PM: resume devices took 8.664 seconds" in your dmesg output when this happens. I'm setting this to traiged for further investigation. Thanks!

[This is an automated message. Apologies if it has reached you inappropriately.]

[Brian Murray (brian-murray)]

Thank you for taking the time to report this bug and helping to make Ubuntu better. This particular bug has already been reported and is a duplicate of bug 417842, so it is being marked as such. Please look at the other bug report to see if there is any missing information that you can provide, or to see if there is a workaround for the bug. Additionally, any further discussion regarding the bug should occur in the other report. Please continue to report any other bugs you may find.