Error: command ['sh', '-c', 'dmesg | comm -13 /var/log/dmesg -'] failed with exit code 1: [   55.230330] e1000e 0000:02:00.0: irq 29 for MSI/MSI-X
[   55.290217] e1000e 0000:02:00.0: irq 29 for MSI/MSI-X
[   55.291229] ADDRCONF(NETDEV_UP): eth0: link is not ready
[   55.293281] iwl3945 0000:03:00.0: firmware: requesting iwlwifi-3945-2.ucode
[   55.469573] iwl3945 0000:03:00.0: loaded firmware version 15.32.2.9
[   55.538923] Registered led device: iwl-phy0::radio
[   55.538946] Registered led device: iwl-phy0::assoc
[   55.539007] Registered led device: iwl-phy0::RX
[   55.539027] Registered led device: iwl-phy0::TX
[   55.571282] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   58.487853] usbcore: registered new interface driver usblp
[   59.495415] i2c-adapter i2c-0: unable to read EDID block.
[   59.495421] i915 0000:00:02.0: VGA-1: no EDID data
[   59.514573] i2c-adapter i2c-0: unable to read EDID block.
[   59.514577] i915 0000:00:02.0: VGA-1: no EDID data
[   59.664786] i2c-adapter i2c-0: unable to read EDID block.
[   59.664793] i915 0000:00:02.0: VGA-1: no EDID data
[   59.684509] i2c-adapter i2c-0: unable to read EDID block.
[   59.684515] i915 0000:00:02.0: VGA-1: no EDID data
[   60.109818] [drm] DAC-6: set mode 1024x768 e
[   60.473799] [drm] LVDS-8: set mode 1024x768 f
[   64.516558] wlan0: authenticate with AP 00:0f:66:18:c2:5c
[   64.518366] wlan0: authenticated
[   64.518370] wlan0: associate with AP 00:0f:66:18:c2:5c
[   64.520515] wlan0: RX AssocResp from 00:0f:66:18:c2:5c (capab=0x411 status=0 aid=3)
[   64.520519] wlan0: associated
[   64.550702] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[   68.559594] ppdev: user-space parallel port driver
[   68.833577] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   68.833581] Bluetooth: BNEP filters: protocol multicast
[   68.841296] Bridge firewalling registered
[   75.144507] i2c-adapter i2c-0: unable to read EDID block.
[   75.144513] i915 0000:00:02.0: VGA-1: no EDID data
[   75.164496] i2c-adapter i2c-0: unable to read EDID block.
[   75.164500] i915 0000:00:02.0: VGA-1: no EDID data
[   75.314500] i2c-adapter i2c-0: unable to read EDID block.
[   75.314505] i915 0000:00:02.0: VGA-1: no EDID data
[   75.334588] i2c-adapter i2c-0: unable to read EDID block.
[   75.334592] i915 0000:00:02.0: VGA-1: no EDID data
[   75.514498] i2c-adapter i2c-0: unable to read EDID block.
[   75.514503] i915 0000:00:02.0: VGA-1: no EDID data
[   75.534495] i2c-adapter i2c-0: unable to read EDID block.
[   75.534498] i915 0000:00:02.0: VGA-1: no EDID data
comm: file 2 is not in sorted order
[ 2803.914596] i2c-adapter i2c-0: unable to read EDID block.
[ 2803.914605] i915 0000:00:02.0: VGA-1: no EDID data
[ 2803.944524] i2c-adapter i2c-0: unable to read EDID block.
[ 2803.944533] i915 0000:00:02.0: VGA-1: no EDID data
[ 2804.104539] i2c-adapter i2c-0: unable to read EDID block.
[ 2804.104547] i915 0000:00:02.0: VGA-1: no EDID data
[ 2804.124529] i2c-adapter i2c-0: unable to read EDID block.
[ 2804.124537] i915 0000:00:02.0: VGA-1: no EDID data
[ 2804.297055] i2c-adapter i2c-0: unable to read EDID block.
[ 2804.297063] i915 0000:00:02.0: VGA-1: no EDID data
[ 2804.317036] i2c-adapter i2c-0: unable to read EDID block.
[ 2804.317043] i915 0000:00:02.0: VGA-1: no EDID data
[ 3179.934844] [drm] LVDS-8: set mode 1280x800 c
[ 3181.294546] i2c-adapter i2c-0: unable to read EDID block.
[ 3181.294554] i915 0000:00:02.0: VGA-1: no EDID data
[ 3182.304519] i2c-adapter i2c-0: unable to read EDID block.
[ 3182.304526] i915 0000:00:02.0: VGA-1: no EDID data
[ 3183.434541] i2c-adapter i2c-0: unable to read EDID block.
[ 3183.434550] i915 0000:00:02.0: VGA-1: no EDID data
[ 3184.434542] i2c-adapter i2c-0: unable to read EDID block.
[ 3184.434550] i915 0000:00:02.0: VGA-1: no EDID data
[ 3184.671260] [drm] DAC-6: set mode 1024x768 18
[ 3185.034754] [drm] LVDS-8: set mode 1024x768 1b
[ 3186.694566] i2c-adapter i2c-0: unable to read EDID block.
[ 3186.694575] i915 0000:00:02.0: VGA-1: no EDID data
[ 3186.714571] i2c-adapter i2c-0: unable to read EDID block.
[ 3186.714577] i915 0000:00:02.0: VGA-1: no EDID data
[ 3186.874547] i2c-adapter i2c-0: unable to read EDID block.
[ 3186.874555] i915 0000:00:02.0: VGA-1: no EDID data
[ 3186.894547] i2c-adapter i2c-0: unable to read EDID block.
[ 3186.894553] i915 0000:00:02.0: VGA-1: no EDID data
[ 3187.054538] i2c-adapter i2c-0: unable to read EDID block.
[ 3187.054546] i915 0000:00:02.0: VGA-1: no EDID data
[ 3187.074537] i2c-adapter i2c-0: unable to read EDID block.
[ 3187.074543] i915 0000:00:02.0: VGA-1: no EDID data
[ 3197.300108] usb 5-1: USB disconnect, address 2
[ 3197.300495] btusb_intr_complete: hci0 urb ffff8800b0cbd840 failed to resubmit (19)
[ 3197.300506] btusb_bulk_complete: hci0 urb ffff8800b0cbda80 failed to resubmit (19)
[ 3197.301498] btusb_bulk_complete: hci0 urb ffff8800b4c6ba80 failed to resubmit (19)
[ 3197.313943] btusb_send_frame: hci0 urb ffff8800ba4bb000 submission failed
[ 3197.330106] wlan0: deauthenticating by local choice (reason=3)
[ 3197.454750] i2c-adapter i2c-0: unable to read EDID block.
[ 3197.454759] i915 0000:00:02.0: VGA-1: no EDID data
[ 3197.484530] i2c-adapter i2c-0: unable to read EDID block.
[ 3197.484536] i915 0000:00:02.0: VGA-1: no EDID data
[ 3197.601641] wlan0: disassociating by local choice (reason=3)
[ 3197.664515] i2c-adapter i2c-0: unable to read EDID block.
[ 3197.664521] i915 0000:00:02.0: VGA-1: no EDID data
[ 3197.704488] i2c-adapter i2c-0: unable to read EDID block.
[ 3197.704494] i915 0000:00:02.0: VGA-1: no EDID data
[ 3197.864489] i2c-adapter i2c-0: unable to read EDID block.
[ 3197.864494] i915 0000:00:02.0: VGA-1: no EDID data
[ 3197.943497] i2c-adapter i2c-0: unable to read EDID block.
[ 3197.943504] i915 0000:00:02.0: VGA-1: no EDID data
[ 3199.250472] PM: Syncing filesystems ... done.
[ 3199.272411] PM: Preparing system for mem sleep
[ 3199.272416] Freezing user space processes ... (elapsed 0.00 seconds) done.
[ 3199.273227] Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done.
[ 3199.273272] PM: Entering mem sleep
[ 3199.273287] Suspending console(s) (use no_console_suspend to debug)
[ 3199.590070] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[ 3199.590143] sd 0:0:0:0: [sda] Stopping disk
[ 3201.070634] nsc-ircc 00:0a: disabled
[ 3201.090411] e1000e 0000:02:00.0: PCI INT A disabled
[ 3201.090421] e1000e 0000:02:00.0: PME# enabled
[ 3201.150119] ata6: port disabled. ignoring.
[ 3201.150168] ata_piix 0000:00:1f.1: PCI INT C disabled
[ 3201.150179] ehci_hcd 0000:00:1d.7: PCI INT D disabled
[ 3201.150187] uhci_hcd 0000:00:1d.3: PCI INT D disabled
[ 3201.150195] uhci_hcd 0000:00:1d.2: PCI INT C disabled
[ 3201.150203] uhci_hcd 0000:00:1d.1: PCI INT B disabled
[ 3201.150211] uhci_hcd 0000:00:1d.0: PCI INT A disabled
[ 3201.150216] pciehp 0000:00:1c.3:pcie04: pciehp_suspend ENTRY
[ 3201.150221] pciehp 0000:00:1c.2:pcie04: pciehp_suspend ENTRY
[ 3201.150225] pciehp 0000:00:1c.1:pcie04: pciehp_suspend ENTRY
[ 3201.150229] pciehp 0000:00:1c.0:pcie04: pciehp_suspend ENTRY
[ 3201.260115] HDA Intel 0000:00:1b.0: PCI INT B disabled
[ 3201.289395] i915 0000:00:02.0: PCI INT A disabled
[ 3201.300099] i915 0000:00:02.0: power state changed by ACPI to D3
[ 3201.300154] PM: suspend devices took 2.030 seconds
[ 3201.300469] ehci_hcd 0000:00:1d.7: PME# disabled
[ 3201.580062] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D3
[ 3201.820070] uhci_hcd 0000:00:1d.2: power state changed by ACPI to D3
[ 3202.060071] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D3
[ 3202.440064] ACPI: Preparing to enter system sleep state S3
[ 3203.520215] Disabling non-boot CPUs ...
[ 3203.630021] CPU 1 is now offline
[ 3203.630025] SMP alternatives: switching to UP code
[ 3203.638535] CPU0 attaching NULL sched-domain.
[ 3203.638539] CPU1 attaching NULL sched-domain.
[ 3203.638550] CPU0 attaching NULL sched-domain.
[ 3203.638769] CPU1 is down
[ 3203.638820] Extended CMOS year: 2000
[ 3203.638820] Back to C!
[ 3203.638820] Extended CMOS year: 2000
[ 3203.638820] Enabling non-boot CPUs ...
[ 3203.638820] SMP alternatives: switching to SMP code
[ 3203.647109] Booting processor 1 APIC 0x1 ip 0x6000
[ 3203.638387] Initializing CPU#1
[ 3203.638387] Calibrating delay using timer specific routine.. 3323.99 BogoMIPS (lpj=16619966)
[ 3203.638387] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 3203.638387] CPU: L2 cache: 2048K
[ 3203.638387] CPU 1/0x1 -> Node 0
[ 3203.638387] CPU: Physical Processor ID: 0
[ 3203.638387] CPU: Processor Core ID: 1
[ 3203.800490] CPU1: Intel(R) Core(TM)2 CPU         T5500  @ 1.66GHz stepping 06
[ 3203.800575] CPU0 attaching NULL sched-domain.
[ 3203.802518] Switched to high resolution mode on CPU 1
[ 3203.840026] CPU0 attaching sched-domain:
[ 3203.840030]  domain 0: span 0-1 level MC
[ 3203.840033]   groups: 0 1
[ 3203.840038] CPU1 attaching sched-domain:
[ 3203.840041]  domain 0: span 0-1 level MC
[ 3203.840043]   groups: 1 0
[ 3203.842520] CPU1 is up
[ 3203.842523] ACPI: Waking up from system sleep state S3
[ 3206.500157] i915 0000:00:02.0: restoring config space at offset 0x1 (was 0x900003, writing 0x900007)
[ 3206.500181] pci 0000:00:02.1: restoring config space at offset 0x1 (was 0x900000, writing 0x900003)
[ 3206.500227] HDA Intel 0000:00:1b.0: restoring config space at offset 0x1 (was 0x100106, writing 0x100102)
[ 3206.500282] pcieport-driver 0000:00:1c.0: restoring config space at offset 0x1 (was 0x180107, writing 0x100507)
[ 3206.500346] pcieport-driver 0000:00:1c.1: restoring config space at offset 0x7 (was 0x4030, writing 0x20004030)
[ 3206.500360] pcieport-driver 0000:00:1c.1: restoring config space at offset 0x1 (was 0x100107, writing 0x100507)
[ 3206.500422] pcieport-driver 0000:00:1c.2: restoring config space at offset 0x7 (was 0x20006050, writing 0x6050)
[ 3206.500435] pcieport-driver 0000:00:1c.2: restoring config space at offset 0x1 (was 0x100107, writing 0x100507)
[ 3206.500485] pcieport-driver 0000:00:1c.3: restoring config space at offset 0xf (was 0x40400, writing 0x4040b)
[ 3206.500499] pcieport-driver 0000:00:1c.3: restoring config space at offset 0x9 (was 0x10001, writing 0xe421e421)
[ 3206.500505] pcieport-driver 0000:00:1c.3: restoring config space at offset 0x8 (was 0x0, writing 0xebf0ea00)
[ 3206.500511] pcieport-driver 0000:00:1c.3: restoring config space at offset 0x7 (was 0x20000000, writing 0x8070)
[ 3206.500521] pcieport-driver 0000:00:1c.3: restoring config space at offset 0x3 (was 0x810000, writing 0x810010)
[ 3206.500529] pcieport-driver 0000:00:1c.3: restoring config space at offset 0x1 (was 0x100000, writing 0x100507)
[ 3206.920061] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0
[ 3206.920089] uhci_hcd 0000:00:1d.0: restoring config space at offset 0x1 (was 0x2800005, writing 0x2800001)
[ 3206.920122] uhci_hcd 0000:00:1d.1: restoring config space at offset 0x1 (was 0x2800005, writing 0x2800001)
[ 3207.000069] uhci_hcd 0000:00:1d.2: power state changed by ACPI to D0
[ 3207.000097] uhci_hcd 0000:00:1d.2: restoring config space at offset 0x1 (was 0x2800005, writing 0x2800001)
[ 3207.000130] uhci_hcd 0000:00:1d.3: restoring config space at offset 0x1 (was 0x2800005, writing 0x2800001)
[ 3207.000172] ehci_hcd 0000:00:1d.7: restoring config space at offset 0x1 (was 0x2900106, writing 0x2900102)
[ 3207.000192] ehci_hcd 0000:00:1d.7: PME# disabled
[ 3207.000224] pci 0000:00:1e.0: restoring config space at offset 0x1 (was 0x100005, writing 0x100007)
[ 3207.000308] ata_piix 0000:00:1f.1: restoring config space at offset 0x1 (was 0x2800005, writing 0x2880005)
[ 3207.000350] ahci 0000:00:1f.2: restoring config space at offset 0x1 (was 0x2b00007, writing 0x2b00407)
[ 3207.000760] iwl3945 0000:03:00.0: restoring config space at offset 0x1 (was 0x100106, writing 0x100506)
[ 3207.000886] yenta_cardbus 0000:15:00.0: restoring config space at offset 0xf (was 0x34001ff, writing 0x5c0010b)
[ 3207.000893] yenta_cardbus 0000:15:00.0: restoring config space at offset 0xe (was 0x0, writing 0x94fc)
[ 3207.000899] yenta_cardbus 0000:15:00.0: restoring config space at offset 0xd (was 0x0, writing 0x9400)
[ 3207.000906] yenta_cardbus 0000:15:00.0: restoring config space at offset 0xc (was 0x0, writing 0x90fc)
[ 3207.000913] yenta_cardbus 0000:15:00.0: restoring config space at offset 0xb (was 0x0, writing 0x9000)
[ 3207.000920] yenta_cardbus 0000:15:00.0: restoring config space at offset 0xa (was 0x0, writing 0xc3fff000)
[ 3207.000926] yenta_cardbus 0000:15:00.0: restoring config space at offset 0x9 (was 0x0, writing 0xc0000000)
[ 3207.000933] yenta_cardbus 0000:15:00.0: restoring config space at offset 0x8 (was 0x0, writing 0xe3fff000)
[ 3207.000940] yenta_cardbus 0000:15:00.0: restoring config space at offset 0x7 (was 0x0, writing 0xe0000000)
[ 3207.000947] yenta_cardbus 0000:15:00.0: restoring config space at offset 0x6 (was 0x0, writing 0xb0171615)
[ 3207.000956] yenta_cardbus 0000:15:00.0: restoring config space at offset 0x4 (was 0x0, writing 0xe4300000)
[ 3207.000962] yenta_cardbus 0000:15:00.0: restoring config space at offset 0x3 (was 0x20000, writing 0x2a810)
[ 3207.000971] yenta_cardbus 0000:15:00.0: restoring config space at offset 0x1 (was 0x2100000, writing 0x2100007)
[ 3207.150114] pciehp 0000:00:1c.0:pcie04: Card present on Slot(2)
[ 3207.260041] pciehp 0000:00:1c.0:pcie04: Device 0000:02:00.0 already exists at 0000:02:00, cannot hot-add
[ 3207.260048] pciehp 0000:00:1c.0:pcie04: Cannot add device at 0000:02:00
[ 3207.286423] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 3207.286429] i915 0000:00:02.0: setting latency timer to 64
[ 3207.360300] [drm] DAC-6: set mode 1024x768 18
[ 3207.433897] [drm] LVDS-8: set mode 1024x768 1b
[ 3207.446555] pci 0000:00:02.1: PME# disabled
[ 3207.446563] HDA Intel 0000:00:1b.0: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 3207.446571] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 3207.446590] pciehp 0000:00:1c.0:pcie04: pciehp_resume ENTRY
[ 3207.446596] pciehp 0000:00:1c.1:pcie04: pciehp_resume ENTRY
[ 3207.446600] pciehp 0000:00:1c.2:pcie04: pciehp_resume ENTRY
[ 3207.446605] pciehp 0000:00:1c.3:pcie04: pciehp_resume ENTRY
[ 3207.446614] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 3207.446621] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 3207.446648] usb usb2: root hub lost power or was reset
[ 3207.446669] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 3207.446676] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 3207.446702] usb usb3: root hub lost power or was reset
[ 3207.446722] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 3207.446729] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 3207.446755] usb usb4: root hub lost power or was reset
[ 3207.446778] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[ 3207.446787] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[ 3207.446815] usb usb5: root hub lost power or was reset
[ 3207.446836] ehci_hcd 0000:00:1d.7: PME# disabled
[ 3207.446840] ehci_hcd 0000:00:1d.7: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[ 3207.446847] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 3207.446861] pci 0000:00:1e.0: setting latency timer to 64
[ 3207.446871] ata_piix 0000:00:1f.1: PCI INT C -> GSI 16 (level, low) -> IRQ 16
[ 3207.446877] ata_piix 0000:00:1f.1: setting latency timer to 64
[ 3207.446899] ahci 0000:00:1f.2: setting latency timer to 64
[ 3207.446966] e1000e 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 3207.446974] e1000e 0000:02:00.0: setting latency timer to 64
[ 3207.446985] e1000e 0000:02:00.0: PME# disabled
[ 3207.446993] e1000e 0000:02:00.0: PME# disabled
[ 3207.447073] e1000e 0000:02:00.0: irq 29 for MSI/MSI-X
[ 3207.447314] ata6: port disabled. ignoring.
[ 3207.524255] nsc-ircc 00:0a: activated
[ 3207.620538] ata5.00: ACPI cmd ef/03:42:00:00:00:a0 filtered out
[ 3207.620542] ata5.00: ACPI cmd ef/03:0c:00:00:00:a0 filtered out
[ 3207.620783] ata5.00: ACPI cmd e3/00:1f:00:00:00:a0 succeeded
[ 3207.621023] ata5.00: ACPI cmd e3/00:02:00:00:00:a0 succeeded
[ 3207.680472] ata5.00: configured for UDMA/33
[ 3207.970057] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 3207.971194] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 succeeded
[ 3207.971198] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out
[ 3207.971384] ata1.00: ACPI cmd ef/5f:00:00:00:00:a0 succeeded
[ 3207.971387] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 filtered out
[ 3207.973577] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 succeeded
[ 3207.973580] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out
[ 3207.973761] ata1.00: ACPI cmd ef/5f:00:00:00:00:a0 succeeded
[ 3207.973765] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 filtered out
[ 3207.974646] ata1.00: configured for UDMA/100
[ 3207.990044] ata1: exception Emask 0x10 SAct 0x0 SErr 0x0 action 0x9 t4
[ 3207.990047] ata1: irq_stat 0x00400040, connection status changed
[ 3207.992006] ata1.00: configured for UDMA/100
[ 3207.992009] ata1: EH complete
[ 3208.122191] sd 0:0:0:0: [sda] Starting disk
[ 3208.780058] usb 4-1: reset low speed USB device using uhci_hcd and address 2
[ 3209.100484] PM: resume devices took 1.950 seconds
[ 3209.100517] PM: Finishing wakeup.
[ 3209.100519] Restarting tasks ... done.
[ 3209.743037] e1000e 0000:02:00.0: irq 29 for MSI/MSI-X
[ 3209.802729] e1000e 0000:02:00.0: irq 29 for MSI/MSI-X
[ 3209.804078] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 3209.899103] Registered led device: iwl-phy0::radio
[ 3209.899129] Registered led device: iwl-phy0::assoc
[ 3209.899195] Registered led device: iwl-phy0::RX
[ 3209.899216] Registered led device: iwl-phy0::TX
[ 3209.941821] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 3210.662590] usb 5-1: new full speed USB device using uhci_hcd and address 3
[ 3210.833457] usb 5-1: configuration #1 chosen from 1 choice
[ 3213.977222] i2c-adapter i2c-0: unable to read EDID block.
[ 3213.977228] i915 0000:00:02.0: VGA-1: no EDID data
[ 3213.997071] i2c-adapter i2c-0: unable to read EDID block.
[ 3213.997078] i915 0000:00:02.0: VGA-1: no EDID data
[ 3214.184640] i2c-adapter i2c-0: unable to read EDID block.
[ 3214.184649] i915 0000:00:02.0: VGA-1: no EDID data
[ 3214.205632] i2c-adapter i2c-0: unable to read EDID block.
[ 3214.205638] i915 0000:00:02.0: VGA-1: no EDID data
[ 3214.364727] i2c-adapter i2c-0: unable to read EDID block.
[ 3214.364734] i915 0000:00:02.0: VGA-1: no EDID data
[ 3214.384811] i2c-adapter i2c-0: unable to read EDID block.
[ 3214.384817] i915 0000:00:02.0: VGA-1: no EDID data
[ 3214.953509] [drm] LVDS-8: set mode  1c
[ 3215.145237] wlan0: authenticate with AP 00:0f:66:18:c2:5c
[ 3215.200700] wlan0: authenticated
[ 3215.200706] wlan0: associate with AP 00:0f:66:18:c2:5c
[ 3215.220880] [drm] DAC-6: set mode  21
[ 3215.221047] wlan0: RX AssocResp from 00:0f:66:18:c2:5c (capab=0x411 status=0 aid=3)
[ 3215.221051] wlan0: associated
[ 3215.236293] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 3246.804427] usb 5-1: USB disconnect, address 3
[ 3246.804753] btusb_intr_complete: hci0 urb ffff8800b0c09300 failed to resubmit (19)
[ 3246.804775] btusb_bulk_complete: hci0 urb ffff8800b0c09900 failed to resubmit (19)
[ 3246.805749] btusb_bulk_complete: hci0 urb ffff8800b0c09cc0 failed to resubmit (19)
[ 3497.012584] CE: hpet increasing min_delta_ns to 15000 nsec
[ 4014.025930] CE: hpet increasing min_delta_ns to 22500 nsec
[ 9740.790134] usb 4-1: USB disconnect, address 2
[ 9740.897079] i2c-adapter i2c-0: unable to read EDID block.
[ 9740.897088] i915 0000:00:02.0: VGA-1: no EDID data
[ 9740.917055] i2c-adapter i2c-0: unable to read EDID block.
[ 9740.917063] i915 0000:00:02.0: VGA-1: no EDID data
[ 9741.287742] [drm] DAC-6: set mode  d
[ 9754.725400] Monitor-Mwait will be used to enter C-3 state
[10145.930725] CE: hpet increasing min_delta_ns to 33750 nsec
[15377.827032] dumpcap uses obsolete (PF_INET,SOCK_PACKET)
[16753.122599] device wlan0 entered promiscuous mode
[16815.430117]  CIFS VFS: cifs_mount failed w/return code = -6
[16815.889262]  CIFS VFS: cifs_mount failed w/return code = -6
[16853.230069] device wlan0 left promiscuous mode
[16859.312564] device wlan0 entered promiscuous mode
[16871.260054] device wlan0 left promiscuous mode
[18189.390125]  CIFS VFS: Error connecting to socket. Aborting operation
[18189.390139]  CIFS VFS: cifs_mount failed w/return code = -512
[18207.794089] device wlan0 entered promiscuous mode
[18275.930069] device wlan0 left promiscuous mode
[18550.872596] device wlan0 entered promiscuous mode
[18565.510077] device wlan0 left promiscuous mode
[23253.940110] wlan0: deauthenticating by local choice (reason=3)
[23254.070024] iwl3945 0000:03:00.0: MAC is in deep sleep!.  CSR_GP_CNTRL = 0x040003DD
[23254.095652] wlan0: disassociating by local choice (reason=3)
[23261.313115] usb 5-1: new full speed USB device using uhci_hcd and address 4
[23261.504252] usb 5-1: configuration #1 chosen from 1 choice
[23262.112335] Registered led device: iwl-phy0::radio
[23262.112360] Registered led device: iwl-phy0::assoc
[23262.112425] Registered led device: iwl-phy0::RX
[23262.112446] Registered led device: iwl-phy0::TX
[23262.142296] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[23267.204272] wlan0: authenticate with AP 00:0f:66:18:c2:5c
[23267.400049] wlan0: authenticate with AP 00:0f:66:18:c2:5c
[23267.600103] wlan0: authenticate with AP 00:0f:66:18:c2:5c
[23267.800043] wlan0: authentication with AP 00:0f:66:18:c2:5c timed out
[23273.889204] wlan0: authenticate with AP 00:0f:66:18:c2:5c
[23274.080049] wlan0: authenticate with AP 00:0f:66:18:c2:5c
[23274.280054] wlan0: authenticate with AP 00:0f:66:18:c2:5c
[23274.480049] wlan0: authentication with AP 00:0f:66:18:c2:5c timed out
[23279.040170] usb 5-1: USB disconnect, address 4
[23279.040539] btusb_intr_complete: hci0 urb ffff88008edaa840 failed to resubmit (19)
[23279.040552] btusb_bulk_complete: hci0 urb ffff88008edaa540 failed to resubmit (19)
[23279.041538] btusb_bulk_complete: hci0 urb ffff88008edaaa80 failed to resubmit (19)
[23280.540057] wlan0: authenticate with AP 00:0f:66:18:c2:5c
[23280.747504] wlan0: authenticate with AP 00:0f:66:18:c2:5c
[23280.940049] wlan0: authenticate with AP 00:0f:66:18:c2:5c
[23281.140044] wlan0: authentication with AP 00:0f:66:18:c2:5c timed out
[23284.403213] wlan0: authenticate with AP 00:0f:66:18:c2:5c
[23284.600052] wlan0: authenticate with AP 00:0f:66:18:c2:5c
[23284.800052] wlan0: authenticate with AP 00:0f:66:18:c2:5c
[23285.000058] wlan0: authentication with AP 00:0f:66:18:c2:5c timed out
[23291.061811] wlan0: authenticate with AP 00:0f:66:18:c2:5c
[23291.260049] wlan0: authenticate with AP 00:0f:66:18:c2:5c
[23291.460052] wlan0: authenticate with AP 00:0f:66:18:c2:5c
[23291.660044] wlan0: authentication with AP 00:0f:66:18:c2:5c timed out
[23297.741296] wlan0: authenticate with AP 00:0f:66:18:c2:5c
[23297.940048] wlan0: authenticate with AP 00:0f:66:18:c2:5c
[23298.140049] wlan0: authenticate with AP 00:0f:66:18:c2:5c
[23298.342613] wlan0: authentication with AP 00:0f:66:18:c2:5c timed out
[23304.402936] wlan0: authenticate with AP 00:0f:66:18:c2:5c
[23304.600092] wlan0: authenticate with AP 00:0f:66:18:c2:5c
[23304.800099] wlan0: authenticate with AP 00:0f:66:18:c2:5c
[23305.000994] wlan0: authentication with AP 00:0f:66:18:c2:5c timed out
[23311.112403] wlan0: authenticate with AP 00:0f:66:18:c2:5c
[23311.310078] wlan0: authenticate with AP 00:0f:66:18:c2:5c
[23311.510065] wlan0: authenticate with AP 00:0f:66:18:c2:5c
[23311.710090] wlan0: authentication with AP 00:0f:66:18:c2:5c timed out
[23314.295808] wlan0: authenticate with AP 00:0f:66:18:c2:5c
[23314.490097] wlan0: authenticate with AP 00:0f:66:18:c2:5c
[23314.700053] wlan0: authenticate with AP 00:0f:66:18:c2:5c
[23314.890078] wlan0: authentication with AP 00:0f:66:18:c2:5c timed out
[23320.972985] wlan0: authenticate with AP 00:0f:66:18:c2:5c
[23321.170058] wlan0: authenticate with AP 00:0f:66:18:c2:5c
[23321.370095] wlan0: authenticate with AP 00:0f:66:18:c2:5c
[23321.570095] wlan0: authentication with AP 00:0f:66:18:c2:5c timed out
[23327.631653] wlan0: authenticate with AP 00:0f:66:18:c2:5c
[23327.830069] wlan0: authenticate with AP 00:0f:66:18:c2:5c
[23328.032632] wlan0: authenticate with AP 00:0f:66:18:c2:5c
[23328.230096] wlan0: authentication with AP 00:0f:66:18:c2:5c timed out
[23334.358999] wlan0: authenticate with AP 00:0f:66:18:c2:5c
[23334.550082] wlan0: authenticate with AP 00:0f:66:18:c2:5c
[23334.750092] wlan0: authenticate with AP 00:0f:66:18:c2:5c
[23334.950086] wlan0: authentication with AP 00:0f:66:18:c2:5c timed out
[23340.999193] wlan0: authenticate with AP 00:0f:66:18:c2:5c
[23341.192607] wlan0: authenticate with AP 00:0f:66:18:c2:5c
[23341.390093] wlan0: authenticate with AP 00:0f:66:18:c2:5c
[23341.590072] wlan0: authentication with AP 00:0f:66:18:c2:5c timed out
[23347.700578] wlan0: authenticate with AP 00:0f:66:18:c2:5c
[23347.890104] wlan0: authenticate with AP 00:0f:66:18:c2:5c
[23348.090051] wlan0: authenticate with AP 00:0f:66:18:c2:5c
[23348.290100] wlan0: authentication with AP 00:0f:66:18:c2:5c timed out
[23354.385587] wlan0: authenticate with AP 00:0f:66:18:c2:5c
[23354.580079] wlan0: authenticate with AP 00:0f:66:18:c2:5c
[23354.790079] wlan0: authenticate with AP 00:0f:66:18:c2:5c
[23354.980091] wlan0: authentication with AP 00:0f:66:18:c2:5c timed out
[23374.322679] wlan0: authenticate with AP 00:0f:66:18:c2:5c
[23374.324514] wlan0: authenticated
[23374.324521] wlan0: associate with AP 00:0f:66:18:c2:5c
[23374.326874] wlan0: RX AssocResp from 00:0f:66:18:c2:5c (capab=0x411 status=0 aid=4)
[23374.326881] wlan0: associated
[23374.351052] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[23374.500081] nfs: server becquer not responding, timed out
[23374.641929] wlan0: disassociating by local choice (reason=3)
[23385.300060] wlan0: no IPv6 routers present
[23434.500119] nfs: server becquer not responding, timed out
[23457.930045] iwl3945 0000:03:00.0: MAC is in deep sleep!.  CSR_GP_CNTRL = 0x040003DD
[23495.630092] usb 5-1: new full speed USB device using uhci_hcd and address 5
[23495.799399] usb 5-1: configuration #1 chosen from 1 choice
[23496.115849] Registered led device: iwl-phy0::radio
[23496.115905] Registered led device: iwl-phy0::assoc
[23496.115941] Registered led device: iwl-phy0::RX
[23496.115975] Registered led device: iwl-phy0::TX
[23496.164090] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[23501.790099] usb 5-1: USB disconnect, address 5
[23501.790340] btusb_intr_complete: hci0 urb ffff8800aec55840 failed to resubmit (19)
[23501.790357] btusb_bulk_complete: hci0 urb ffff8800aec55a80 failed to resubmit (19)
[23501.791343] btusb_bulk_complete: hci0 urb ffff8800aec55c00 failed to resubmit (19)
[23580.292438] Registered led device: iwl-phy0::radio
[23580.292481] Registered led device: iwl-phy0::assoc
[23580.292566] Registered led device: iwl-phy0::RX
[23580.292602] Registered led device: iwl-phy0::TX
[23580.361591] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[23611.908678] Registered led device: iwl-phy0::radio
[23611.908719] Registered led device: iwl-phy0::assoc
[23611.908755] Registered led device: iwl-phy0::RX
[23611.908855] Registered led device: iwl-phy0::TX
[23611.943147] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[23616.981306] wlan0: authenticate with AP 00:0f:66:18:c2:5c
[23616.984430] wlan0: authenticated
[23616.984438] wlan0: associate with AP 00:0f:66:18:c2:5c
[23616.986654] wlan0: RX AssocResp from 00:0f:66:18:c2:5c (capab=0x411 status=0 aid=4)
[23616.986660] wlan0: associated
[23616.989223] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[25573.936521] __ratelimit: 9 callbacks suppressed
[25573.936526] gnome-power-man[3702]: segfault at 8 ip 000000000040c601 sp 00007fffb8ea49d0 error 4 in gnome-power-manager (deleted)[400000+2f000]
[69698.230067] usb 4-1: new low speed USB device using uhci_hcd and address 3
[69698.413272] usb 4-1: configuration #1 chosen from 1 choice
[69698.448008] input: USB KVM as /devices/pci0000:00/0000:00:1d.2/usb4/4-1/4-1:1.0/input/input12
[69698.448144] generic-usb 0003:0D3D:0028.0003: input,hidraw0: USB HID v1.00 Keyboard [USB KVM] on usb-0000:00:1d.2-1/input0
[69698.481992] input: USB KVM as /devices/pci0000:00/0000:00:1d.2/usb4/4-1/4-1:1.1/input/input13
[69698.482110] generic-usb 0003:0D3D:0028.0004: input,hidraw1: USB HID v1.00 Mouse [USB KVM] on usb-0000:00:1d.2-1/input1
[69706.944563] i2c-adapter i2c-0: unable to read EDID block.
[69706.944573] i915 0000:00:02.0: VGA-1: no EDID data
[69706.964628] i2c-adapter i2c-0: unable to read EDID block.
[69706.964633] i915 0000:00:02.0: VGA-1: no EDID data
[69707.304815] [drm] DAC-6: set mode  22
[69718.544648] i2c-adapter i2c-0: unable to read EDID block.
[69718.544656] i915 0000:00:02.0: VGA-1: no EDID data
[69718.564538] i2c-adapter i2c-0: unable to read EDID block.
[69718.564545] i915 0000:00:02.0: VGA-1: no EDID data
[69718.724605] i2c-adapter i2c-0: unable to read EDID block.
[69718.724613] i915 0000:00:02.0: VGA-1: no EDID data
[69718.764531] i2c-adapter i2c-0: unable to read EDID block.
[69718.764539] i915 0000:00:02.0: VGA-1: no EDID data
[69718.924538] i2c-adapter i2c-0: unable to read EDID block.
[69718.924546] i915 0000:00:02.0: VGA-1: no EDID data
[69718.966152] i2c-adapter i2c-0: unable to read EDID block.
[69718.966160] i915 0000:00:02.0: VGA-1: no EDID data
[69719.295437] [drm] DAC-6: set mode  24
[70401.777069] i2c-adapter i2c-0: unable to read EDID block.
[70401.777079] i915 0000:00:02.0: VGA-1: no EDID data
[70401.797049] i2c-adapter i2c-0: unable to read EDID block.
[70401.797055] i915 0000:00:02.0: VGA-1: no EDID data
[70402.112715] [drm] DAC-6: set mode  26
[70405.937332] i2c-adapter i2c-0: unable to read EDID block.
[70405.937342] i915 0000:00:02.0: VGA-1: no EDID data
[70405.957071] i2c-adapter i2c-0: unable to read EDID block.
[70405.957079] i915 0000:00:02.0: VGA-1: no EDID data
[70406.291100] [drm] DAC-6: set mode  28
[70407.917068] i2c-adapter i2c-0: unable to read EDID block.
[70407.917078] i915 0000:00:02.0: VGA-1: no EDID data
[70407.937063] i2c-adapter i2c-0: unable to read EDID block.
[70407.937071] i915 0000:00:02.0: VGA-1: no EDID data
[70410.045065] i2c-adapter i2c-0: unable to read EDID block.
[70410.045075] i915 0000:00:02.0: VGA-1: no EDID data
[70410.064523] i2c-adapter i2c-0: unable to read EDID block.
[70410.064531] i915 0000:00:02.0: VGA-1: no EDID data
[70410.717764] [drm] DAC-6: set mode  2d
[99527.100055] wlan0: no probe response from AP 00:0f:66:18:c2:5c - disassociating
[99542.102012] wlan0: authenticate with AP 00:0f:66:18:c2:5c
[99542.103986] wlan0: authenticated
[99542.103993] wlan0: associate with AP 00:0f:66:18:c2:5c
[99542.106192] wlan0: RX ReassocResp from 00:0f:66:18:c2:5c (capab=0x411 status=0 aid=3)
[99542.106198] wlan0: associated
[100925.540121] usb 4-1: USB disconnect, address 3
[100929.214548] i2c-adapter i2c-0: unable to read EDID block.
[100929.214558] i915 0000:00:02.0: VGA-1: no EDID data
[100929.234542] i2c-adapter i2c-0: unable to read EDID block.
[100929.234548] i915 0000:00:02.0: VGA-1: no EDID data
[100929.451618] [drm] LVDS-8: set mode  2f
[110448.990067] usb 4-1: new low speed USB device using uhci_hcd and address 4
[110449.163273] usb 4-1: configuration #1 chosen from 1 choice
[110449.198028] input: USB KVM as /devices/pci0000:00/0000:00:1d.2/usb4/4-1/4-1:1.0/input/input14
[110449.198161] generic-usb 0003:0D3D:0028.0005: input,hidraw0: USB HID v1.00 Keyboard [USB KVM] on usb-0000:00:1d.2-1/input0
[110449.229553] input: USB KVM as /devices/pci0000:00/0000:00:1d.2/usb4/4-1/4-1:1.1/input/input15
[110449.229734] generic-usb 0003:0D3D:0028.0006: input,hidraw1: USB HID v1.00 Mouse [USB KVM] on usb-0000:00:1d.2-1/input1
[110451.227091] i2c-adapter i2c-0: unable to read EDID block.
[110451.227101] i915 0000:00:02.0: VGA-1: no EDID data
[110451.247961] i2c-adapter i2c-0: unable to read EDID block.
[110451.247969] i915 0000:00:02.0: VGA-1: no EDID data
[110451.524699] [drm] DAC-6: set mode  30
[110483.964525] i2c-adapter i2c-0: unable to read EDID block.
[110483.964533] i915 0000:00:02.0: VGA-1: no EDID data
[110483.985953] i2c-adapter i2c-0: unable to read EDID block.
[110483.985961] i915 0000:00:02.0: VGA-1: no EDID data
[110484.144534] i2c-adapter i2c-0: unable to read EDID block.
[110484.144542] i915 0000:00:02.0: VGA-1: no EDID data
[110484.164529] i2c-adapter i2c-0: unable to read EDID block.
[110484.164535] i915 0000:00:02.0: VGA-1: no EDID data
[110484.324527] i2c-adapter i2c-0: unable to read EDID block.
[110484.324535] i915 0000:00:02.0: VGA-1: no EDID data
[110484.344524] i2c-adapter i2c-0: unable to read EDID block.
[110484.344531] i915 0000:00:02.0: VGA-1: no EDID data
[110484.676652] [drm] DAC-6: set mode  2a
[110692.914540] i2c-adapter i2c-0: unable to read EDID block.
[110692.914550] i915 0000:00:02.0: VGA-1: no EDID data
[110692.934773] i2c-adapter i2c-0: unable to read EDID block.
[110692.934781] i915 0000:00:02.0: VGA-1: no EDID data
[110693.257441] [drm] DAC-6: set mode  33
[110702.997069] i2c-adapter i2c-0: unable to read EDID block.
[110702.997079] i915 0000:00:02.0: VGA-1: no EDID data
[110703.037050] i2c-adapter i2c-0: unable to read EDID block.
[110703.037057] i915 0000:00:02.0: VGA-1: no EDID data
[110703.358569] [drm] DAC-6: set mode  35
[110704.375207] i2c-adapter i2c-0: unable to read EDID block.
[110704.375214] i915 0000:00:02.0: VGA-1: no EDID data
[110704.398554] i2c-adapter i2c-0: unable to read EDID block.
[110704.398561] i915 0000:00:02.0: VGA-1: no EDID data
[110705.457088] i2c-adapter i2c-0: unable to read EDID block.
[110705.457097] i915 0000:00:02.0: VGA-1: no EDID data
[110705.474517] i2c-adapter i2c-0: unable to read EDID block.
[110705.474524] i915 0000:00:02.0: VGA-1: no EDID data
[110706.098049] [drm] DAC-6: set mode  3a
[115612.300046] wlan0: no probe response from AP 00:0f:66:18:c2:5c - disassociating
[115614.128668] wlan0: authenticate with AP 00:0f:66:18:c2:5c
[115614.130519] wlan0: authenticated
[115614.130524] wlan0: associate with AP 00:0f:66:18:c2:5c
[115614.132731] wlan0: RX ReassocResp from 00:0f:66:18:c2:5c (capab=0x411 status=0 aid=3)
[115614.132737] wlan0: associated
[157826.040579] usb 4-1: USB disconnect, address 4
[157842.208795] [drm] LVDS-8: set mode  37
[157884.609801] wlan0: disassociating by local choice (reason=3)
[157884.712675] wlan0: deauthenticating by local choice (reason=3)
[157886.174211] PM: Syncing filesystems ... done.
[157886.616411] PM: Preparing system for mem sleep
[157886.616416] Freezing user space processes ... (elapsed 0.02 seconds) done.
[157886.643769] Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done.
[157886.643864] PM: Entering mem sleep
[157886.643879] Suspending console(s) (use no_console_suspend to debug)
[157886.915344] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[157886.915423] sd 0:0:0:0: [sda] Stopping disk
[157888.410575] nsc-ircc 00:0a: disabled
[157888.430467] e1000e 0000:02:00.0: PCI INT A disabled
[157888.430477] e1000e 0000:02:00.0: PME# enabled
[157888.490182] ata6: port disabled. ignoring.
[157888.490244] ata_piix 0000:00:1f.1: PCI INT C disabled
[157888.490260] ehci_hcd 0000:00:1d.7: PCI INT D disabled
[157888.490272] uhci_hcd 0000:00:1d.3: PCI INT D disabled
[157888.490283] uhci_hcd 0000:00:1d.2: PCI INT C disabled
[157888.490294] uhci_hcd 0000:00:1d.1: PCI INT B disabled
[157888.490305] uhci_hcd 0000:00:1d.0: PCI INT A disabled
[157888.490312] pciehp 0000:00:1c.3:pcie04: pciehp_suspend ENTRY
[157888.490319] pciehp 0000:00:1c.2:pcie04: pciehp_suspend ENTRY
[157888.490325] pciehp 0000:00:1c.1:pcie04: pciehp_suspend ENTRY
[157888.490332] pciehp 0000:00:1c.0:pcie04: pciehp_suspend ENTRY
[157888.490364] HDA Intel 0000:00:1b.0: PCI INT B disabled
[157888.519646] i915 0000:00:02.0: PCI INT A disabled
[157888.530179] i915 0000:00:02.0: power state changed by ACPI to D3
[157888.530268] PM: suspend devices took 1.890 seconds
[157888.530623] ehci_hcd 0000:00:1d.7: PME# disabled
[157888.630076] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D3
[157888.710071] uhci_hcd 0000:00:1d.2: power state changed by ACPI to D3
[157888.970063] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D3
[157889.330064] ACPI: Preparing to enter system sleep state S3
[157890.410222] Disabling non-boot CPUs ...
[157890.520021] CPU 1 is now offline
[157890.520024] SMP alternatives: switching to UP code
[157890.528697] CPU0 attaching NULL sched-domain.
[157890.528700] CPU1 attaching NULL sched-domain.
[157890.528711] CPU0 attaching NULL sched-domain.
[157890.528964] CPU1 is down
[157890.529016] Extended CMOS year: 2000
[157890.529016] Back to C!
[157890.529016] Extended CMOS year: 2000
[157890.529016] Enabling non-boot CPUs ...
[157890.529016] SMP alternatives: switching to SMP code
[157890.537430] Booting processor 1 APIC 0x1 ip 0x6000
[157890.528549] Initializing CPU#1
[157890.528549] Calibrating delay using timer specific routine.. 3323.96 BogoMIPS (lpj=16619814)
[157890.528549] CPU: L1 I cache: 32K, L1 D cache: 32K
[157890.528549] CPU: L2 cache: 2048K
[157890.528549] CPU 1/0x1 -> Node 0
[157890.528549] CPU: Physical Processor ID: 0
[157890.528549] CPU: Processor Core ID: 1
[157890.690513] CPU1: Intel(R) Core(TM)2 CPU         T5500  @ 1.66GHz stepping 06
[157890.690610] CPU0 attaching NULL sched-domain.
[157890.692518] Switched to high resolution mode on CPU 1
[157890.730026] CPU0 attaching sched-domain:
[157890.730030]  domain 0: span 0-1 level MC
[157890.730033]   groups: 0 1
[157890.730038] CPU1 attaching sched-domain:
[157890.730040]  domain 0: span 0-1 level MC
[157890.730043]   groups: 1 0
[157890.732519] CPU1 is up
[157890.732522] ACPI: Waking up from system sleep state S3
[157893.350158] i915 0000:00:02.0: restoring config space at offset 0x1 (was 0x900003, writing 0x900007)
[157893.350182] pci 0000:00:02.1: restoring config space at offset 0x1 (was 0x900000, writing 0x900003)
[157893.350227] HDA Intel 0000:00:1b.0: restoring config space at offset 0x1 (was 0x100106, writing 0x100102)
[157893.350282] pcieport-driver 0000:00:1c.0: restoring config space at offset 0x1 (was 0x180107, writing 0x100507)
[157893.350356] pcieport-driver 0000:00:1c.1: restoring config space at offset 0x1 (was 0x100107, writing 0x100507)
[157893.350426] pcieport-driver 0000:00:1c.2: restoring config space at offset 0x1 (was 0x100107, writing 0x100507)
[157893.350477] pcieport-driver 0000:00:1c.3: restoring config space at offset 0xf (was 0x40400, writing 0x4040b)
[157893.350490] pcieport-driver 0000:00:1c.3: restoring config space at offset 0x9 (was 0x10001, writing 0xe421e421)
[157893.350496] pcieport-driver 0000:00:1c.3: restoring config space at offset 0x8 (was 0x0, writing 0xebf0ea00)
[157893.350502] pcieport-driver 0000:00:1c.3: restoring config space at offset 0x7 (was 0x20000000, writing 0x20008070)
[157893.350513] pcieport-driver 0000:00:1c.3: restoring config space at offset 0x3 (was 0x810000, writing 0x810010)
[157893.350520] pcieport-driver 0000:00:1c.3: restoring config space at offset 0x1 (was 0x100000, writing 0x100507)
[157893.770062] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0
[157893.770089] uhci_hcd 0000:00:1d.0: restoring config space at offset 0x1 (was 0x2800005, writing 0x2800001)
[157893.770123] uhci_hcd 0000:00:1d.1: restoring config space at offset 0x1 (was 0x2800005, writing 0x2800001)
[157893.850068] uhci_hcd 0000:00:1d.2: power state changed by ACPI to D0
[157893.850096] uhci_hcd 0000:00:1d.2: restoring config space at offset 0x1 (was 0x2800005, writing 0x2800001)
[157893.850129] uhci_hcd 0000:00:1d.3: restoring config space at offset 0x1 (was 0x2800005, writing 0x2800001)
[157893.850171] ehci_hcd 0000:00:1d.7: restoring config space at offset 0x1 (was 0x2900106, writing 0x2900102)
[157893.850191] ehci_hcd 0000:00:1d.7: PME# disabled
[157893.850222] pci 0000:00:1e.0: restoring config space at offset 0x1 (was 0x100005, writing 0x100007)
[157893.850307] ata_piix 0000:00:1f.1: restoring config space at offset 0x1 (was 0x2800005, writing 0x2880005)
[157893.850348] ahci 0000:00:1f.2: restoring config space at offset 0x1 (was 0x2b00007, writing 0x2b00407)
[157893.850760] iwl3945 0000:03:00.0: restoring config space at offset 0x1 (was 0x100106, writing 0x100506)
[157893.850885] yenta_cardbus 0000:15:00.0: restoring config space at offset 0xf (was 0x34001ff, writing 0x5c0010b)
[157893.850892] yenta_cardbus 0000:15:00.0: restoring config space at offset 0xe (was 0x0, writing 0x94fc)
[157893.850899] yenta_cardbus 0000:15:00.0: restoring config space at offset 0xd (was 0x0, writing 0x9400)
[157893.850906] yenta_cardbus 0000:15:00.0: restoring config space at offset 0xc (was 0x0, writing 0x90fc)
[157893.850913] yenta_cardbus 0000:15:00.0: restoring config space at offset 0xb (was 0x0, writing 0x9000)
[157893.850920] yenta_cardbus 0000:15:00.0: restoring config space at offset 0xa (was 0x0, writing 0xc3fff000)
[157893.850927] yenta_cardbus 0000:15:00.0: restoring config space at offset 0x9 (was 0x0, writing 0xc0000000)
[157893.850934] yenta_cardbus 0000:15:00.0: restoring config space at offset 0x8 (was 0x0, writing 0xe3fff000)
[157893.850941] yenta_cardbus 0000:15:00.0: restoring config space at offset 0x7 (was 0x0, writing 0xe0000000)
[157893.850948] yenta_cardbus 0000:15:00.0: restoring config space at offset 0x6 (was 0x0, writing 0xb0171615)
[157893.850957] yenta_cardbus 0000:15:00.0: restoring config space at offset 0x4 (was 0x0, writing 0xe4300000)
[157893.850964] yenta_cardbus 0000:15:00.0: restoring config space at offset 0x3 (was 0x20000, writing 0x2a810)
[157893.850973] yenta_cardbus 0000:15:00.0: restoring config space at offset 0x1 (was 0x2100000, writing 0x2100007)
[157894.000118] pciehp 0000:00:1c.0:pcie04: Card present on Slot(2)
[157894.110040] pciehp 0000:00:1c.0:pcie04: Device 0000:02:00.0 already exists at 0000:02:00, cannot hot-add
[157894.110047] pciehp 0000:00:1c.0:pcie04: Cannot add device at 0000:02:00
[157894.134937] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[157894.134942] i915 0000:00:02.0: setting latency timer to 64
[157894.208986] [drm] LVDS-8: set mode  37
[157894.241834] pci 0000:00:02.1: PME# disabled
[157894.241842] HDA Intel 0000:00:1b.0: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[157894.241850] HDA Intel 0000:00:1b.0: setting latency timer to 64
[157894.241870] pciehp 0000:00:1c.0:pcie04: pciehp_resume ENTRY
[157894.241875] pciehp 0000:00:1c.1:pcie04: pciehp_resume ENTRY
[157894.241880] pciehp 0000:00:1c.2:pcie04: pciehp_resume ENTRY
[157894.241884] pciehp 0000:00:1c.3:pcie04: pciehp_resume ENTRY
[157894.241893] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[157894.241900] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[157894.241926] usb usb2: root hub lost power or was reset
[157894.241947] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[157894.241954] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[157894.241979] usb usb3: root hub lost power or was reset
[157894.241999] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[157894.242006] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[157894.242031] usb usb4: root hub lost power or was reset
[157894.242051] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[157894.242058] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[157894.242084] usb usb5: root hub lost power or was reset
[157894.242105] ehci_hcd 0000:00:1d.7: PME# disabled
[157894.242110] ehci_hcd 0000:00:1d.7: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[157894.242117] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[157894.242130] pci 0000:00:1e.0: setting latency timer to 64
[157894.242140] ata_piix 0000:00:1f.1: PCI INT C -> GSI 16 (level, low) -> IRQ 16
[157894.242146] ata_piix 0000:00:1f.1: setting latency timer to 64
[157894.242169] ahci 0000:00:1f.2: setting latency timer to 64
[157894.242234] e1000e 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[157894.242243] e1000e 0000:02:00.0: setting latency timer to 64
[157894.242254] e1000e 0000:02:00.0: PME# disabled
[157894.242262] e1000e 0000:02:00.0: PME# disabled
[157894.242343] e1000e 0000:02:00.0: irq 29 for MSI/MSI-X
[157894.242569] ata6: port disabled. ignoring.
[157894.326823] nsc-ircc 00:0a: activated
[157894.420579] ata5.00: ACPI cmd ef/03:42:00:00:00:a0 filtered out
[157894.420583] ata5.00: ACPI cmd ef/03:0c:00:00:00:a0 filtered out
[157894.420865] ata5.00: ACPI cmd e3/00:1f:00:00:00:a0 succeeded
[157894.421091] ata5.00: ACPI cmd e3/00:02:00:00:00:a0 succeeded
[157894.480513] ata5.00: configured for UDMA/33
[157894.495380] sd 0:0:0:0: [sda] Starting disk
[157894.890113] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[157894.891377] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 succeeded
[157894.891383] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out
[157894.891579] ata1.00: ACPI cmd ef/5f:00:00:00:00:a0 succeeded
[157894.891585] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 filtered out
[157894.893922] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 succeeded
[157894.893928] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out
[157894.894117] ata1.00: ACPI cmd ef/5f:00:00:00:00:a0 succeeded
[157894.894123] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 filtered out
[157894.895032] ata1.00: configured for UDMA/100
[157894.910107] ata1: exception Emask 0x10 SAct 0x0 SErr 0x0 action 0x9 t4
[157894.910111] ata1: irq_stat 0x00400040, connection status changed
[157894.912130] ata1.00: configured for UDMA/100
[157894.912135] ata1: EH complete
[157895.313536] PM: resume devices took 1.310 seconds
[157895.313569] PM: Finishing wakeup.
[157895.313572] Restarting tasks ... done.
[157895.793113] e1000e 0000:02:00.0: irq 29 for MSI/MSI-X
[157895.852762] e1000e 0000:02:00.0: irq 29 for MSI/MSI-X
[157895.854100] ADDRCONF(NETDEV_UP): eth0: link is not ready
[157905.370122] usb 5-1: new full speed USB device using uhci_hcd and address 6
[157905.560367] usb 5-1: configuration #1 chosen from 1 choice
[157940.533576] iwl3945 0000:03:00.0: PCI INT A disabled
[157942.482755] cfg80211: Calling CRDA to update world regulatory domain
[157942.583307] cfg80211: World regulatory domain updated:
[157942.583314] 	(start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[157942.583321] 	(2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[157942.583327] 	(2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[157942.583332] 	(2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[157942.583338] 	(5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[157942.583343] 	(5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[157942.668345] iwl3945: Intel(R) PRO/Wireless 3945ABG/BG Network Connection driver for Linux, 1.2.26ks
[157942.668352] iwl3945: Copyright(c) 2003-2009 Intel Corporation
[157942.669499] iwl3945 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[157942.669525] iwl3945 0000:03:00.0: setting latency timer to 64
[157942.741220] iwl3945 0000:03:00.0: Tunable channels: 11 802.11bg, 13 802.11a channels
[157942.741227] iwl3945 0000:03:00.0: Detected Intel Wireless WiFi Link 3945ABG
[157942.741397] iwl3945 0000:03:00.0: irq 30 for MSI/MSI-X
[157942.742335] phy0: Selected rate control algorithm 'iwl-3945-rs'
[157942.773484] iwl3945 0000:03:00.0: firmware: requesting iwlwifi-3945-2.ucode
[157942.884972] iwl3945 0000:03:00.0: loaded firmware version 15.32.2.9
[157942.949674] Registered led device: iwl-phy0::radio
[157942.949757] Registered led device: iwl-phy0::assoc
[157942.949800] Registered led device: iwl-phy0::RX
[157942.949836] Registered led device: iwl-phy0::TX
[157943.001546] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[157943.818118] cfg80211: Found new beacon on frequency: 5220 MHz (Ch 44) on phy0
[157943.929285] cfg80211: Found new beacon on frequency: 5240 MHz (Ch 48) on phy0
[157944.468023] cfg80211: Found new beacon on frequency: 5745 MHz (Ch 149) on phy0
[157944.539260] cfg80211: Found new beacon on frequency: 5765 MHz (Ch 153) on phy0
[157944.606453] cfg80211: Found new beacon on frequency: 5785 MHz (Ch 157) on phy0
[157949.540143] usb 5-1: USB disconnect, address 6
[157949.540403] btusb_intr_complete: hci0 urb ffff88006c55a480 failed to resubmit (19)
[157949.540423] btusb_bulk_complete: hci0 urb ffff88006c55a600 failed to resubmit (19)
[157949.541382] btusb_bulk_complete: hci0 urb ffff88006c55ac00 failed to resubmit (19)
[157950.140424] cfg80211: Found new beacon on frequency: 5805 MHz (Ch 161) on phy0
[157973.968747] Registered led device: iwl-phy0::radio
[157973.968828] Registered led device: iwl-phy0::assoc
[157973.968864] Registered led device: iwl-phy0::RX
[157973.968898] Registered led device: iwl-phy0::TX
[157974.031563] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[157983.520557] e1000e 0000:02:00.0: irq 29 for MSI/MSI-X
[157983.580287] e1000e 0000:02:00.0: irq 29 for MSI/MSI-X
[157983.581647] ADDRCONF(NETDEV_UP): eth0: link is not ready
[157983.652105] Registered led device: iwl-phy0::radio
[157983.652209] Registered led device: iwl-phy0::assoc
[157983.652245] Registered led device: iwl-phy0::RX
[157983.652279] Registered led device: iwl-phy0::TX
[157983.681301] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[157989.761016] Registered led device: iwl-phy0::radio
[157989.761130] Registered led device: iwl-phy0::assoc
[157989.761157] Registered led device: iwl-phy0::RX
[157989.761184] Registered led device: iwl-phy0::TX
[157989.803919] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[158087.443954] PM: Syncing filesystems ... done.
[158087.467779] PM: Preparing system for mem sleep
[158087.467784] Freezing user space processes ... 
[158093.342535] nfs: server becquer not responding, timed out
[158093.342568] (elapsed 5.87 seconds) done.
[158093.342571] Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done.
[158093.342654] PM: Entering mem sleep
[158093.342668] Suspending console(s) (use no_console_suspend to debug)
[158093.604527] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[158093.604622] sd 0:0:0:0: [sda] Stopping disk
[158095.110609] nsc-ircc 00:0a: disabled
[158095.130622] e1000e 0000:02:00.0: PCI INT A disabled
[158095.130631] e1000e 0000:02:00.0: PME# enabled
[158095.190181] ata6: port disabled. ignoring.
[158095.190243] ata_piix 0000:00:1f.1: PCI INT C disabled
[158095.190259] ehci_hcd 0000:00:1d.7: PCI INT D disabled
[158095.190271] uhci_hcd 0000:00:1d.3: PCI INT D disabled
[158095.190282] uhci_hcd 0000:00:1d.2: PCI INT C disabled
[158095.190292] uhci_hcd 0000:00:1d.1: PCI INT B disabled
[158095.190303] uhci_hcd 0000:00:1d.0: PCI INT A disabled
[158095.190311] pciehp 0000:00:1c.3:pcie04: pciehp_suspend ENTRY
[158095.190317] pciehp 0000:00:1c.2:pcie04: pciehp_suspend ENTRY
[158095.190324] pciehp 0000:00:1c.1:pcie04: pciehp_suspend ENTRY
[158095.190330] pciehp 0000:00:1c.0:pcie04: pciehp_suspend ENTRY
[158095.190348] HDA Intel 0000:00:1b.0: PCI INT B disabled
[158095.217260] i915 0000:00:02.0: PCI INT A disabled
[158095.230174] i915 0000:00:02.0: power state changed by ACPI to D3
[158095.230257] PM: suspend devices took 1.890 seconds
[158095.230608] ehci_hcd 0000:00:1d.7: PME# disabled
[158095.330075] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D3
[158095.410070] uhci_hcd 0000:00:1d.2: power state changed by ACPI to D3
[158095.670061] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D3
[158096.030063] ACPI: Preparing to enter system sleep state S3
[158097.150217] Disabling non-boot CPUs ...
[158097.260021] CPU 1 is now offline
[158097.260025] SMP alternatives: switching to UP code
[158097.268668] CPU0 attaching NULL sched-domain.
[158097.268672] CPU1 attaching NULL sched-domain.
[158097.268683] CPU0 attaching NULL sched-domain.
[158097.268933] CPU1 is down
[158097.268985] Extended CMOS year: 2000
[158097.268985] Back to C!
[158097.268985] Extended CMOS year: 2000
[158097.268985] Enabling non-boot CPUs ...
[158097.268985] SMP alternatives: switching to SMP code
[158097.277398] Booting processor 1 APIC 0x1 ip 0x6000
[158097.268511] Initializing CPU#1
[158097.268511] Calibrating delay using timer specific routine.. 3323.97 BogoMIPS (lpj=16619890)
[158097.268511] CPU: L1 I cache: 32K, L1 D cache: 32K
[158097.268511] CPU: L2 cache: 2048K
[158097.268511] CPU 1/0x1 -> Node 0
[158097.268511] CPU: Physical Processor ID: 0
[158097.268511] CPU: Processor Core ID: 1
[158097.430578] CPU1: Intel(R) Core(TM)2 CPU         T5500  @ 1.66GHz stepping 06
[158097.430671] CPU0 attaching NULL sched-domain.
[158097.432518] Switched to high resolution mode on CPU 1
[158097.470028] CPU0 attaching sched-domain:
[158097.470032]  domain 0: span 0-1 level MC
[158097.470035]   groups: 0 1
[158097.470040] CPU1 attaching sched-domain:
[158097.470043]  domain 0: span 0-1 level MC
[158097.470045]   groups: 1 0
[158097.472520] CPU1 is up
[158097.472524] ACPI: Waking up from system sleep state S3
[158100.110159] i915 0000:00:02.0: restoring config space at offset 0x1 (was 0x900003, writing 0x900007)
[158100.110183] pci 0000:00:02.1: restoring config space at offset 0x1 (was 0x900000, writing 0x900003)
[158100.110230] HDA Intel 0000:00:1b.0: restoring config space at offset 0x1 (was 0x100106, writing 0x100102)
[158100.110284] pcieport-driver 0000:00:1c.0: restoring config space at offset 0x1 (was 0x180107, writing 0x100507)
[158100.110358] pcieport-driver 0000:00:1c.1: restoring config space at offset 0x1 (was 0x100107, writing 0x100507)
[158100.110429] pcieport-driver 0000:00:1c.2: restoring config space at offset 0x1 (was 0x100107, writing 0x100507)
[158100.110480] pcieport-driver 0000:00:1c.3: restoring config space at offset 0xf (was 0x40400, writing 0x4040b)
[158100.110494] pcieport-driver 0000:00:1c.3: restoring config space at offset 0x9 (was 0x10001, writing 0xe421e421)
[158100.110500] pcieport-driver 0000:00:1c.3: restoring config space at offset 0x8 (was 0x0, writing 0xebf0ea00)
[158100.110506] pcieport-driver 0000:00:1c.3: restoring config space at offset 0x7 (was 0x20000000, writing 0x8070)
[158100.110516] pcieport-driver 0000:00:1c.3: restoring config space at offset 0x3 (was 0x810000, writing 0x810010)
[158100.110524] pcieport-driver 0000:00:1c.3: restoring config space at offset 0x1 (was 0x100000, writing 0x100507)
[158100.530061] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0
[158100.530089] uhci_hcd 0000:00:1d.0: restoring config space at offset 0x1 (was 0x2800005, writing 0x2800001)
[158100.530124] uhci_hcd 0000:00:1d.1: restoring config space at offset 0x1 (was 0x2800005, writing 0x2800001)
[158100.610069] uhci_hcd 0000:00:1d.2: power state changed by ACPI to D0
[158100.610097] uhci_hcd 0000:00:1d.2: restoring config space at offset 0x1 (was 0x2800005, writing 0x2800001)
[158100.610130] uhci_hcd 0000:00:1d.3: restoring config space at offset 0x1 (was 0x2800005, writing 0x2800001)
[158100.610172] ehci_hcd 0000:00:1d.7: restoring config space at offset 0x1 (was 0x2900106, writing 0x2900102)
[158100.610192] ehci_hcd 0000:00:1d.7: PME# disabled
[158100.610223] pci 0000:00:1e.0: restoring config space at offset 0x1 (was 0x100005, writing 0x100007)
[158100.610309] ata_piix 0000:00:1f.1: restoring config space at offset 0x1 (was 0x2800005, writing 0x2880005)
[158100.610351] ahci 0000:00:1f.2: restoring config space at offset 0x1 (was 0x2b00007, writing 0x2b00407)
[158100.610762] iwl3945 0000:03:00.0: restoring config space at offset 0x1 (was 0x100106, writing 0x100506)
[158100.610888] yenta_cardbus 0000:15:00.0: restoring config space at offset 0xf (was 0x34001ff, writing 0x5c0010b)
[158100.610895] yenta_cardbus 0000:15:00.0: restoring config space at offset 0xe (was 0x0, writing 0x94fc)
[158100.610901] yenta_cardbus 0000:15:00.0: restoring config space at offset 0xd (was 0x0, writing 0x9400)
[158100.610908] yenta_cardbus 0000:15:00.0: restoring config space at offset 0xc (was 0x0, writing 0x90fc)
[158100.610915] yenta_cardbus 0000:15:00.0: restoring config space at offset 0xb (was 0x0, writing 0x9000)
[158100.610922] yenta_cardbus 0000:15:00.0: restoring config space at offset 0xa (was 0x0, writing 0xc3fff000)
[158100.610929] yenta_cardbus 0000:15:00.0: restoring config space at offset 0x9 (was 0x0, writing 0xc0000000)
[158100.610936] yenta_cardbus 0000:15:00.0: restoring config space at offset 0x8 (was 0x0, writing 0xe3fff000)
[158100.610943] yenta_cardbus 0000:15:00.0: restoring config space at offset 0x7 (was 0x0, writing 0xe0000000)
[158100.610950] yenta_cardbus 0000:15:00.0: restoring config space at offset 0x6 (was 0x0, writing 0xb0171615)
[158100.610959] yenta_cardbus 0000:15:00.0: restoring config space at offset 0x4 (was 0x0, writing 0xe4300000)
[158100.610966] yenta_cardbus 0000:15:00.0: restoring config space at offset 0x3 (was 0x20000, writing 0x2a810)
[158100.610975] yenta_cardbus 0000:15:00.0: restoring config space at offset 0x1 (was 0x2100000, writing 0x2100007)
[158100.760113] pciehp 0000:00:1c.0:pcie04: Card present on Slot(2)
[158100.870045] pciehp 0000:00:1c.0:pcie04: Device 0000:02:00.0 already exists at 0000:02:00, cannot hot-add
[158100.870077] pciehp 0000:00:1c.0:pcie04: Cannot add device at 0000:02:00
[158100.898635] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[158100.898641] i915 0000:00:02.0: setting latency timer to 64
[158100.972634] [drm] LVDS-8: set mode  37
[158101.005516] pci 0000:00:02.1: PME# disabled
[158101.005524] HDA Intel 0000:00:1b.0: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[158101.005532] HDA Intel 0000:00:1b.0: setting latency timer to 64
[158101.005552] pciehp 0000:00:1c.0:pcie04: pciehp_resume ENTRY
[158101.005557] pciehp 0000:00:1c.1:pcie04: pciehp_resume ENTRY
[158101.005561] pciehp 0000:00:1c.2:pcie04: pciehp_resume ENTRY
[158101.005566] pciehp 0000:00:1c.3:pcie04: pciehp_resume ENTRY
[158101.005574] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[158101.005581] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[158101.005608] usb usb2: root hub lost power or was reset
[158101.005628] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[158101.005635] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[158101.005661] usb usb3: root hub lost power or was reset
[158101.005680] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[158101.005687] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[158101.005713] usb usb4: root hub lost power or was reset
[158101.005733] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[158101.005740] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[158101.005766] usb usb5: root hub lost power or was reset
[158101.005787] ehci_hcd 0000:00:1d.7: PME# disabled
[158101.005792] ehci_hcd 0000:00:1d.7: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[158101.005799] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[158101.005812] pci 0000:00:1e.0: setting latency timer to 64
[158101.005823] ata_piix 0000:00:1f.1: PCI INT C -> GSI 16 (level, low) -> IRQ 16
[158101.005828] ata_piix 0000:00:1f.1: setting latency timer to 64
[158101.005850] ahci 0000:00:1f.2: setting latency timer to 64
[158101.005917] e1000e 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[158101.005926] e1000e 0000:02:00.0: setting latency timer to 64
[158101.005937] e1000e 0000:02:00.0: PME# disabled
[158101.005945] e1000e 0000:02:00.0: PME# disabled
[158101.006026] e1000e 0000:02:00.0: irq 29 for MSI/MSI-X
[158101.006262] ata6: port disabled. ignoring.
[158101.084313] nsc-ircc 00:0a: activated
[158101.180584] ata5.00: ACPI cmd ef/03:42:00:00:00:a0 filtered out
[158101.180588] ata5.00: ACPI cmd ef/03:0c:00:00:00:a0 filtered out
[158101.180874] ata5.00: ACPI cmd e3/00:1f:00:00:00:a0 succeeded
[158101.181105] ata5.00: ACPI cmd e3/00:02:00:00:00:a0 succeeded
[158101.240514] ata5.00: configured for UDMA/33
[158101.254960] sd 0:0:0:0: [sda] Starting disk
[158101.590113] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[158101.591389] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 succeeded
[158101.591395] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out
[158101.591590] ata1.00: ACPI cmd ef/5f:00:00:00:00:a0 succeeded
[158101.591596] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 filtered out
[158101.593937] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 succeeded
[158101.593943] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out
[158101.594138] ata1.00: ACPI cmd ef/5f:00:00:00:00:a0 succeeded
[158101.594144] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 filtered out
[158101.595046] ata1.00: configured for UDMA/100
[158101.610107] ata1: exception Emask 0x10 SAct 0x0 SErr 0x0 action 0x9 t4
[158101.610111] ata1: irq_stat 0x00400040, connection status changed
[158101.612130] ata1.00: configured for UDMA/100
[158101.612136] ata1: EH complete
[158102.003430] PM: resume devices took 1.240 seconds
[158102.003463] PM: Finishing wakeup.
[158102.003466] Restarting tasks ... done.
[158102.154853] e1000e 0000:02:00.0: irq 29 for MSI/MSI-X
[158102.213132] e1000e 0000:02:00.0: irq 29 for MSI/MSI-X
[158102.214186] ADDRCONF(NETDEV_UP): eth0: link is not ready
[158102.330559] Registered led device: iwl-phy0::radio
[158102.330626] Registered led device: iwl-phy0::assoc
[158102.330650] Registered led device: iwl-phy0::RX
[158102.330673] Registered led device: iwl-phy0::TX
[158102.373627] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[158110.858805] wlan0: authenticate with AP 00:0f:66:18:c2:5c
[158110.860705] wlan0: authenticated
[158110.860713] wlan0: associate with AP 00:0f:66:18:c2:5c
[158110.862982] wlan0: RX AssocResp from 00:0f:66:18:c2:5c (capab=0x411 status=0 aid=3)
[158110.862993] wlan0: associated
[158110.872109] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[175570.499589] wlan0: deauthenticated (Reason: 7)
[175572.502560] wlan0: direct probe to AP 00:0f:66:18:c2:5c try 1
[175572.504541] wlan0 direct probe responded
[175572.504547] wlan0: authenticate with AP 00:0f:66:18:c2:5c
[175572.506329] wlan0: authenticated
[175572.506332] wlan0: associate with AP 00:0f:66:18:c2:5c
[175572.508473] wlan0: RX ReassocResp from 00:0f:66:18:c2:5c (capab=0x411 status=0 aid=3)
[175572.508476] wlan0: associated
[178090.170957] wlan0: deauthenticated (Reason: 7)
[178091.170148] wlan0: direct probe to AP 00:0f:66:18:c2:5c try 1
[178091.172456] wlan0 direct probe responded
[178091.172463] wlan0: authenticate with AP 00:0f:66:18:c2:5c
[178091.176415] wlan0: authenticated
[178091.176421] wlan0: associate with AP 00:0f:66:18:c2:5c
[178091.181794] wlan0: RX ReassocResp from 00:0f:66:18:c2:5c (capab=0x411 status=0 aid=3)
[178091.181801] wlan0: associated
[235584.730054] usb 4-1: new low speed USB device using uhci_hcd and address 5
[235584.903262] usb 4-1: configuration #1 chosen from 1 choice
[235584.938012] input: USB KVM as /devices/pci0000:00/0000:00:1d.2/usb4/4-1/4-1:1.0/input/input16
[235584.938142] generic-usb 0003:0D3D:0028.0007: input,hidraw0: USB HID v1.00 Keyboard [USB KVM] on usb-0000:00:1d.2-1/input0
[235584.969469] input: USB KVM as /devices/pci0000:00/0000:00:1d.2/usb4/4-1/4-1:1.1/input/input17
[235584.969643] generic-usb 0003:0D3D:0028.0008: input,hidraw1: USB HID v1.00 Mouse [USB KVM] on usb-0000:00:1d.2-1/input1
[235597.594540] i2c-adapter i2c-0: unable to read EDID block.
[235597.594549] i915 0000:00:02.0: VGA-1: no EDID data
[235597.614536] i2c-adapter i2c-0: unable to read EDID block.
[235597.614543] i915 0000:00:02.0: VGA-1: no EDID data
[235597.909235] [drm] DAC-6: set mode  3c
[235664.507072] i2c-adapter i2c-0: unable to read EDID block.
[235664.507080] i915 0000:00:02.0: VGA-1: no EDID data
[235664.547067] i2c-adapter i2c-0: unable to read EDID block.
[235664.547074] i915 0000:00:02.0: VGA-1: no EDID data
[235664.707081] i2c-adapter i2c-0: unable to read EDID block.
[235664.707089] i915 0000:00:02.0: VGA-1: no EDID data
[235664.727077] i2c-adapter i2c-0: unable to read EDID block.
[235664.727084] i915 0000:00:02.0: VGA-1: no EDID data
[235664.887082] i2c-adapter i2c-0: unable to read EDID block.
[235664.887091] i915 0000:00:02.0: VGA-1: no EDID data
[235664.907077] i2c-adapter i2c-0: unable to read EDID block.
[235664.907086] i915 0000:00:02.0: VGA-1: no EDID data
[235665.242474] [drm] DAC-6: set mode  3d
[235695.387078] i2c-adapter i2c-0: unable to read EDID block.
[235695.387088] i915 0000:00:02.0: VGA-1: no EDID data
[235695.407069] i2c-adapter i2c-0: unable to read EDID block.
[235695.407076] i915 0000:00:02.0: VGA-1: no EDID data
[235695.728308] [drm] DAC-6: set mode  41
[235696.034560] i2c-adapter i2c-0: unable to read EDID block.
[235696.034569] i915 0000:00:02.0: VGA-1: no EDID data
[235696.054538] i2c-adapter i2c-0: unable to read EDID block.
[235696.054545] i915 0000:00:02.0: VGA-1: no EDID data
[235696.397046] [drm] DAC-6: set mode  43
[235696.725012] i2c-adapter i2c-0: unable to read EDID block.
[235696.725023] i915 0000:00:02.0: VGA-1: no EDID data
[235696.774485] i2c-adapter i2c-0: unable to read EDID block.
[235696.774493] i915 0000:00:02.0: VGA-1: no EDID data
[235697.406994] i2c-adapter i2c-0: unable to read EDID block.
[235697.407001] i915 0000:00:02.0: VGA-1: no EDID data
[235697.426997] i2c-adapter i2c-0: unable to read EDID block.
[235697.427005] i915 0000:00:02.0: VGA-1: no EDID data
[235698.039466] [drm] DAC-6: set mode  48
[235701.254796] i2c-adapter i2c-0: unable to read EDID block.
[235701.254805] i915 0000:00:02.0: VGA-1: no EDID data
[235701.274536] i2c-adapter i2c-0: unable to read EDID block.
[235701.274542] i915 0000:00:02.0: VGA-1: no EDID data
[235701.500340] [drm] LVDS-8: set mode  4a
[235701.974540] i2c-adapter i2c-0: unable to read EDID block.
[235701.974548] i915 0000:00:02.0: VGA-1: no EDID data
[235701.994536] i2c-adapter i2c-0: unable to read EDID block.
[235701.994542] i915 0000:00:02.0: VGA-1: no EDID data
[235702.310920] [drm] DAC-6: set mode  45
[235702.924548] i2c-adapter i2c-0: unable to read EDID block.
[235702.924558] i915 0000:00:02.0: VGA-1: no EDID data
[235702.964543] i2c-adapter i2c-0: unable to read EDID block.
[235702.964549] i915 0000:00:02.0: VGA-1: no EDID data
[235703.297905] [drm] DAC-6: set mode  4b
[235703.647069] i2c-adapter i2c-0: unable to read EDID block.
[235703.647077] i915 0000:00:02.0: VGA-1: no EDID data
[235703.667072] i2c-adapter i2c-0: unable to read EDID block.
[235703.667078] i915 0000:00:02.0: VGA-1: no EDID data
[235704.397967] i2c-adapter i2c-0: unable to read EDID block.
[235704.397973] i915 0000:00:02.0: VGA-1: no EDID data
[235704.417311] i2c-adapter i2c-0: unable to read EDID block.
[235704.417316] i915 0000:00:02.0: VGA-1: no EDID data
[235705.182350] [drm] DAC-6: set mode  50
[235707.767057] i2c-adapter i2c-0: unable to read EDID block.
[235707.767068] i915 0000:00:02.0: VGA-1: no EDID data
[235707.787072] i2c-adapter i2c-0: unable to read EDID block.
[235707.787078] i915 0000:00:02.0: VGA-1: no EDID data
[235708.013880] [drm] LVDS-8: set mode  52
[235709.617060] i2c-adapter i2c-0: unable to read EDID block.
[235709.617069] i915 0000:00:02.0: VGA-1: no EDID data
[235709.654563] i2c-adapter i2c-0: unable to read EDID block.
[235709.654569] i915 0000:00:02.0: VGA-1: no EDID data
[235709.972144] [drm] DAC-6: set mode  4d
[235733.397077] i2c-adapter i2c-0: unable to read EDID block.
[235733.397086] i915 0000:00:02.0: VGA-1: no EDID data
[235733.417053] i2c-adapter i2c-0: unable to read EDID block.
[235733.417060] i915 0000:00:02.0: VGA-1: no EDID data
[235733.730986] [drm] DAC-6: set mode  53
[235784.794828] i2c-adapter i2c-0: unable to read EDID block.
[235784.794836] i915 0000:00:02.0: VGA-1: no EDID data
[235784.814616] i2c-adapter i2c-0: unable to read EDID block.
[235784.814622] i915 0000:00:02.0: VGA-1: no EDID data
[235784.987045] i2c-adapter i2c-0: unable to read EDID block.
[235784.987053] i915 0000:00:02.0: VGA-1: no EDID data
[235785.007286] i2c-adapter i2c-0: unable to read EDID block.
[235785.007292] i915 0000:00:02.0: VGA-1: no EDID data
[235785.167069] i2c-adapter i2c-0: unable to read EDID block.
[235785.167077] i915 0000:00:02.0: VGA-1: no EDID data
[235785.207062] i2c-adapter i2c-0: unable to read EDID block.
[235785.207071] i915 0000:00:02.0: VGA-1: no EDID data
[235785.541167] [drm] DAC-6: set mode  55
[235813.006473] i2c-adapter i2c-0: unable to read EDID block.
[235813.006482] i915 0000:00:02.0: VGA-1: no EDID data
[235813.027068] i2c-adapter i2c-0: unable to read EDID block.
[235813.027075] i915 0000:00:02.0: VGA-1: no EDID data
[235813.348109] [drm] DAC-6: set mode  59
[235813.767078] i2c-adapter i2c-0: unable to read EDID block.
[235813.767088] i915 0000:00:02.0: VGA-1: no EDID data
[235813.787067] i2c-adapter i2c-0: unable to read EDID block.
[235813.787073] i915 0000:00:02.0: VGA-1: no EDID data
[235814.131952] [drm] DAC-6: set mode  5b
[235814.774548] i2c-adapter i2c-0: unable to read EDID block.
[235814.774557] i915 0000:00:02.0: VGA-1: no EDID data
[235814.794548] i2c-adapter i2c-0: unable to read EDID block.
[235814.794554] i915 0000:00:02.0: VGA-1: no EDID data
[235815.887081] i2c-adapter i2c-0: unable to read EDID block.
[235815.887091] i915 0000:00:02.0: VGA-1: no EDID data
[235815.907054] i2c-adapter i2c-0: unable to read EDID block.
[235815.907061] i915 0000:00:02.0: VGA-1: no EDID data
[235816.514378] [drm] DAC-6: set mode  60
[235819.107095] i2c-adapter i2c-0: unable to read EDID block.
[235819.107104] i915 0000:00:02.0: VGA-1: no EDID data
[235819.127053] i2c-adapter i2c-0: unable to read EDID block.
[235819.127060] i915 0000:00:02.0: VGA-1: no EDID data
[235819.363660] [drm] LVDS-8: set mode  62
[235819.934544] i2c-adapter i2c-0: unable to read EDID block.
[235819.934553] i915 0000:00:02.0: VGA-1: no EDID data
[235819.954533] i2c-adapter i2c-0: unable to read EDID block.
[235819.954539] i915 0000:00:02.0: VGA-1: no EDID data
[235820.273281] [drm] DAC-6: set mode  5d
[235820.824543] i2c-adapter i2c-0: unable to read EDID block.
[235820.824553] i915 0000:00:02.0: VGA-1: no EDID data
[235820.844536] i2c-adapter i2c-0: unable to read EDID block.
[235820.844542] i915 0000:00:02.0: VGA-1: no EDID data
[235821.162878] [drm] DAC-6: set mode  63
[235821.654548] i2c-adapter i2c-0: unable to read EDID block.
[235821.654556] i915 0000:00:02.0: VGA-1: no EDID data
[235821.674536] i2c-adapter i2c-0: unable to read EDID block.
[235821.674541] i915 0000:00:02.0: VGA-1: no EDID data
[235823.164553] i2c-adapter i2c-0: unable to read EDID block.
[235823.164562] i915 0000:00:02.0: VGA-1: no EDID data
[235823.184536] i2c-adapter i2c-0: unable to read EDID block.
[235823.184542] i915 0000:00:02.0: VGA-1: no EDID data
[235823.782412] [drm] DAC-6: set mode  68
[235828.644087] [drm] LVDS-8: set mode  65
[235837.494553] i2c-adapter i2c-0: unable to read EDID block.
[235837.494562] i915 0000:00:02.0: VGA-1: no EDID data
[235837.514541] i2c-adapter i2c-0: unable to read EDID block.
[235837.514547] i915 0000:00:02.0: VGA-1: no EDID data
[235837.802213] [drm] DAC-6: set mode  6a
[235864.356331] i2c-adapter i2c-0: unable to read EDID block.
[235864.356341] i915 0000:00:02.0: VGA-1: no EDID data
[235864.374766] i2c-adapter i2c-0: unable to read EDID block.
[235864.374775] i915 0000:00:02.0: VGA-1: no EDID data
[235864.544762] i2c-adapter i2c-0: unable to read EDID block.
[235864.544772] i915 0000:00:02.0: VGA-1: no EDID data
[235864.574532] i2c-adapter i2c-0: unable to read EDID block.
[235864.574538] i915 0000:00:02.0: VGA-1: no EDID data
[235864.747071] i2c-adapter i2c-0: unable to read EDID block.
[235864.747079] i915 0000:00:02.0: VGA-1: no EDID data
[235864.767069] i2c-adapter i2c-0: unable to read EDID block.
[235864.767076] i915 0000:00:02.0: VGA-1: no EDID data
[235865.104833] [drm] DAC-6: set mode  6b
[235868.437040] i2c-adapter i2c-0: unable to read EDID block.
[235868.437047] i915 0000:00:02.0: VGA-1: no EDID data
[235868.457015] i2c-adapter i2c-0: unable to read EDID block.
[235868.457019] i915 0000:00:02.0: VGA-1: no EDID data
[235869.294940] [drm] DAC-6: set mode  6f
[235870.477076] i2c-adapter i2c-0: unable to read EDID block.
[235870.477085] i915 0000:00:02.0: VGA-1: no EDID data
[235870.496788] i2c-adapter i2c-0: unable to read EDID block.
[235870.496795] i915 0000:00:02.0: VGA-1: no EDID data
[235870.855343] [drm] DAC-6: set mode  71
[235871.786986] i2c-adapter i2c-0: unable to read EDID block.
[235871.786993] i915 0000:00:02.0: VGA-1: no EDID data
[235871.805680] i2c-adapter i2c-0: unable to read EDID block.
[235871.805685] i915 0000:00:02.0: VGA-1: no EDID data
[235872.894530] i2c-adapter i2c-0: unable to read EDID block.
[235872.894539] i915 0000:00:02.0: VGA-1: no EDID data
[235872.914773] i2c-adapter i2c-0: unable to read EDID block.
[235872.914780] i915 0000:00:02.0: VGA-1: no EDID data
[235873.491527] [drm] DAC-6: set mode  76