Oct 13 17:53:38 pedro-laptop NetworkManager: <info>  Sleeping...
Oct 13 17:53:38 pedro-laptop NetworkManager: <info>  (eth0): now unmanaged
Oct 13 17:53:38 pedro-laptop NetworkManager: <info>  (eth0): device state change: 8 -> 1 (reason 37)
Oct 13 17:53:38 pedro-laptop NetworkManager: <info>  (eth0): deactivating device (reason: 37).
Oct 13 17:53:39 pedro-laptop NetworkManager: <info>  (eth0): canceled DHCP transaction, dhcp client pid 18007
Oct 13 17:53:39 pedro-laptop NetworkManager: <WARN>  check_one_route(): (eth0) error -34 returned from rtnl_route_del(): Sucess#012
Oct 13 17:53:39 pedro-laptop NetworkManager: <info>  (eth0): cleaning up...
Oct 13 17:53:39 pedro-laptop NetworkManager: <info>  (eth0): taking down device.
Oct 13 17:53:39 pedro-laptop NetworkManager: <info>  (wlan0): now unmanaged
Oct 13 17:53:39 pedro-laptop NetworkManager: <info>  (wlan0): device state change: 3 -> 1 (reason 37)
Oct 13 17:53:39 pedro-laptop NetworkManager: <info>  (wlan0): cleaning up...
Oct 13 17:53:39 pedro-laptop NetworkManager: <info>  (wlan0): taking down device.
Oct 13 17:53:39 pedro-laptop NetworkManager: <info>  (eth0): carrier now OFF (device state 1)
Oct 13 18:41:01 pedro-laptop kernel: [44779.140383] ADDRCONF(NETDEV_UP): wlan0: link is not ready
Oct 13 18:41:01 pedro-laptop kernel: [44779.885841] [drm] Loading RS600 Microcode
Oct 13 18:41:01 pedro-laptop kernel: [44779.885910] [drm] Num pipes: 1
Oct 13 18:41:01 pedro-laptop kernel: [44780.754496] sky2 eth0: Link is up at 100 Mbps, full duplex, flow control both
Oct 13 18:41:01 pedro-laptop kernel: [44780.754772] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
Oct 13 18:41:01 pedro-laptop kernel: [44791.444048] eth0: no IPv6 routers present
Oct 13 18:41:01 pedro-laptop kernel: [80205.564115] ath5k phy0: noise floor calibration timeout (2462MHz)
Oct 13 18:41:01 pedro-laptop kernel: [80830.501040] sky2 eth0: disabling interface
Oct 13 18:41:01 pedro-laptop kernel: [80831.073658] [drm] Num pipes: 1
Oct 13 18:41:01 pedro-laptop kernel: [80831.752414] PM: Syncing filesystems ... done.
Oct 13 18:41:01 pedro-laptop kernel: [80831.807591] PM: Preparing system for mem sleep
Oct 13 18:41:01 pedro-laptop kernel: [80831.807600] Freezing user space processes ... (elapsed 0.00 seconds) done.
Oct 13 18:41:01 pedro-laptop kernel: [80831.809120] Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done.
Oct 13 18:41:01 pedro-laptop kernel: [80831.809211] PM: Entering mem sleep
Oct 13 18:41:01 pedro-laptop kernel: [80831.809228] Suspending console(s) (use no_console_suspend to debug)
Oct 13 18:41:01 pedro-laptop kernel: [80831.833046] sd 0:0:0:0: [sda] Synchronizing SCSI cache
Oct 13 18:41:01 pedro-laptop kernel: [80832.153526] sd 0:0:0:0: [sda] Stopping disk
Oct 13 18:41:01 pedro-laptop kernel: [80833.646862] ACPI handle has no context!
Oct 13 18:41:01 pedro-laptop kernel: [80833.646958] ath5k 0000:08:00.0: PCI INT A disabled
Oct 13 18:41:01 pedro-laptop kernel: [80833.660115] sky2 0000:02:00.0: PME# disabled
Oct 13 18:41:01 pedro-laptop kernel: [80833.676031] pci 0000:01:05.0: PCI INT A disabled
Oct 13 18:41:01 pedro-laptop kernel: [80833.780103] HDA Intel 0000:00:14.2: PCI INT A disabled
Oct 13 18:41:01 pedro-laptop kernel: [80833.796201] pata_atiixp 0000:00:14.1: PCI INT A disabled
Oct 13 18:41:01 pedro-laptop kernel: [80833.796212] ehci_hcd 0000:00:13.5: PCI INT D disabled
Oct 13 18:41:01 pedro-laptop kernel: [80833.796223] ohci_hcd 0000:00:13.4: PCI INT C disabled
Oct 13 18:41:01 pedro-laptop kernel: [80833.796232] ohci_hcd 0000:00:13.3: PCI INT B disabled
Oct 13 18:41:01 pedro-laptop kernel: [80833.796241] ohci_hcd 0000:00:13.2: PCI INT C disabled
Oct 13 18:41:01 pedro-laptop kernel: [80833.796250] ohci_hcd 0000:00:13.1: PCI INT B disabled
Oct 13 18:41:01 pedro-laptop kernel: [80833.796259] ohci_hcd 0000:00:13.0: PCI INT A disabled
Oct 13 18:41:01 pedro-laptop kernel: [80833.860171] ahci 0000:00:12.0: PCI INT A disabled
Oct 13 18:41:01 pedro-laptop kernel: [80833.863642] PM: suspend devices took 2.052 seconds
Oct 13 18:41:01 pedro-laptop kernel: [80833.863857] ehci_hcd 0000:00:13.5: PME# disabled
Oct 13 18:41:01 pedro-laptop kernel: [80833.964070] ACPI: Preparing to enter system sleep state S3
Oct 13 18:41:01 pedro-laptop kernel: [80833.964793] Disabling non-boot CPUs ...
Oct 13 18:41:01 pedro-laptop kernel: [80834.068018] CPU 1 is now offline
Oct 13 18:41:01 pedro-laptop kernel: [80834.068022] SMP alternatives: switching to UP code
Oct 13 18:41:01 pedro-laptop kernel: [80834.075341] CPU0 attaching NULL sched-domain.
Oct 13 18:41:01 pedro-laptop kernel: [80834.075345] CPU1 attaching NULL sched-domain.
Oct 13 18:41:01 pedro-laptop kernel: [80834.075352] CPU0 attaching NULL sched-domain.
Oct 13 18:41:01 pedro-laptop kernel: [80834.075599] CPU1 is down
Oct 13 18:41:01 pedro-laptop kernel: [80834.075608] Back to C!
Oct 13 18:41:01 pedro-laptop kernel: [80834.075608] Enabling non-boot CPUs ...
Oct 13 18:41:01 pedro-laptop kernel: [80834.076098] SMP alternatives: switching to SMP code
Oct 13 18:41:01 pedro-laptop kernel: [80834.082985] Booting processor 1 APIC 0x1 ip 0x6000
Oct 13 18:41:01 pedro-laptop kernel: [80834.075158] Initializing CPU#1
Oct 13 18:41:01 pedro-laptop kernel: [80834.075158] Calibrating delay using timer specific routine.. 3192.24 BogoMIPS (lpj=6384498)
Oct 13 18:41:01 pedro-laptop kernel: [80834.075158] CPU: L1 I cache: 32K, L1 D cache: 32K
Oct 13 18:41:01 pedro-laptop kernel: [80834.075158] CPU: L2 cache: 1024K
Oct 13 18:41:01 pedro-laptop kernel: [80834.075158] CPU: Physical Processor ID: 0
Oct 13 18:41:01 pedro-laptop kernel: [80834.075158] CPU: Processor Core ID: 1
Oct 13 18:41:01 pedro-laptop kernel: [80834.172448] CPU1: Intel(R) Pentium(R) Dual  CPU  T2330  @ 1.60GHz stepping 0d
Oct 13 18:41:01 pedro-laptop kernel: [80834.172522] CPU0 attaching NULL sched-domain.
Oct 13 18:41:01 pedro-laptop kernel: [80834.173021] Switched to high resolution mode on CPU 1
Oct 13 18:41:01 pedro-laptop kernel: [80834.188029] CPU0 attaching sched-domain:
Oct 13 18:41:01 pedro-laptop kernel: [80834.188033]  domain 0: span 0-1 level MC
Oct 13 18:41:01 pedro-laptop kernel: [80834.188036]   groups: 0 1
Oct 13 18:41:01 pedro-laptop kernel: [80834.188042] CPU1 attaching sched-domain:
Oct 13 18:41:01 pedro-laptop kernel: [80834.188044]  domain 0: span 0-1 level MC
Oct 13 18:41:01 pedro-laptop kernel: [80834.188047]   groups: 1 0
Oct 13 18:41:01 pedro-laptop kernel: [80834.189022] CPU1 is up
Oct 13 18:41:01 pedro-laptop kernel: [80834.189025] ACPI: Waking up from system sleep state S3
Oct 13 18:41:01 pedro-laptop kernel: [80834.632196] pcieport-driver 0000:00:04.0: restoring config space at offset 0xf (was 0xff, writing 0x400ff)
Oct 13 18:41:01 pedro-laptop kernel: [80834.632207] pcieport-driver 0000:00:04.0: restoring config space at offset 0x9 (was 0x10001, writing 0x1fff1)
Oct 13 18:41:01 pedro-laptop kernel: [80834.632212] pcieport-driver 0000:00:04.0: restoring config space at offset 0x8 (was 0x0, writing 0xf040f040)
Oct 13 18:41:01 pedro-laptop kernel: [80834.632217] pcieport-driver 0000:00:04.0: restoring config space at offset 0x7 (was 0x101, writing 0xa1a1)
Oct 13 18:41:01 pedro-laptop kernel: [80834.632222] pcieport-driver 0000:00:04.0: restoring config space at offset 0x6 (was 0x0, writing 0x40200)
Oct 13 18:41:01 pedro-laptop kernel: [80834.632229] pcieport-driver 0000:00:04.0: restoring config space at offset 0x3 (was 0x10000, writing 0x10008)
Oct 13 18:41:01 pedro-laptop kernel: [80834.632235] pcieport-driver 0000:00:04.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100407)
Oct 13 18:41:01 pedro-laptop kernel: [80834.632276] pcieport-driver 0000:00:06.0: restoring config space at offset 0xf (was 0xff, writing 0x400ff)
Oct 13 18:41:01 pedro-laptop kernel: [80834.632286] pcieport-driver 0000:00:06.0: restoring config space at offset 0x9 (was 0x10001, writing 0x1fff1)
Oct 13 18:41:01 pedro-laptop kernel: [80834.632291] pcieport-driver 0000:00:06.0: restoring config space at offset 0x8 (was 0x0, writing 0xfff0)
Oct 13 18:41:01 pedro-laptop kernel: [80834.632296] pcieport-driver 0000:00:06.0: restoring config space at offset 0x7 (was 0x101, writing 0x1f1)
Oct 13 18:41:01 pedro-laptop kernel: [80834.632301] pcieport-driver 0000:00:06.0: restoring config space at offset 0x6 (was 0x0, writing 0x70500)
Oct 13 18:41:01 pedro-laptop kernel: [80834.632308] pcieport-driver 0000:00:06.0: restoring config space at offset 0x3 (was 0x10000, writing 0x10008)
Oct 13 18:41:01 pedro-laptop kernel: [80834.632314] pcieport-driver 0000:00:06.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100404)
Oct 13 18:41:01 pedro-laptop kernel: [80834.632353] pcieport-driver 0000:00:07.0: restoring config space at offset 0xf (was 0xff, writing 0x400ff)
Oct 13 18:41:01 pedro-laptop kernel: [80834.632363] pcieport-driver 0000:00:07.0: restoring config space at offset 0x9 (was 0x10001, writing 0x1fff1)
Oct 13 18:41:01 pedro-laptop kernel: [80834.632368] pcieport-driver 0000:00:07.0: restoring config space at offset 0x8 (was 0x0, writing 0xf030f030)
Oct 13 18:41:01 pedro-laptop kernel: [80834.632373] pcieport-driver 0000:00:07.0: restoring config space at offset 0x7 (was 0x101, writing 0x1f1)
Oct 13 18:41:01 pedro-laptop kernel: [80834.632378] pcieport-driver 0000:00:07.0: restoring config space at offset 0x6 (was 0x0, writing 0xa0800)
Oct 13 18:41:01 pedro-laptop kernel: [80834.632385] pcieport-driver 0000:00:07.0: restoring config space at offset 0x3 (was 0x10000, writing 0x10008)
Oct 13 18:41:01 pedro-laptop kernel: [80834.632391] pcieport-driver 0000:00:07.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100407)
Oct 13 18:41:01 pedro-laptop kernel: [80834.632454] ahci 0000:00:12.0: restoring config space at offset 0x2 (was 0x1018f00, writing 0x1060100)
Oct 13 18:41:01 pedro-laptop kernel: [80834.632481] ahci 0000:00:12.0: set SATA to AHCI mode
Oct 13 18:41:01 pedro-laptop kernel: [80834.632515] ohci_hcd 0000:00:13.0: restoring config space at offset 0x1 (was 0x2a00017, writing 0x2a00013)
Oct 13 18:41:01 pedro-laptop kernel: [80834.632556] ohci_hcd 0000:00:13.1: restoring config space at offset 0x1 (was 0x2a00017, writing 0x2a00013)
Oct 13 18:41:01 pedro-laptop kernel: [80834.632596] ohci_hcd 0000:00:13.2: restoring config space at offset 0x1 (was 0x2a00017, writing 0x2a00013)
Oct 13 18:41:01 pedro-laptop kernel: [80834.632635] ohci_hcd 0000:00:13.3: restoring config space at offset 0x1 (was 0x2a00017, writing 0x2a00013)
Oct 13 18:41:01 pedro-laptop kernel: [80834.632675] ohci_hcd 0000:00:13.4: restoring config space at offset 0x1 (was 0x2a00017, writing 0x2a00013)
Oct 13 18:41:01 pedro-laptop kernel: [80834.632726] ehci_hcd 0000:00:13.5: restoring config space at offset 0x1 (was 0x2b00017, writing 0x2b00013)
Oct 13 18:41:01 pedro-laptop kernel: [80834.632748] ehci_hcd 0000:00:13.5: PME# disabled
Oct 13 18:41:01 pedro-laptop kernel: [80834.632811] pata_atiixp 0000:00:14.1: restoring config space at offset 0x3 (was 0x0, writing 0x4000)
Oct 13 18:41:01 pedro-laptop kernel: [80834.632836] HDA Intel 0000:00:14.2: restoring config space at offset 0xf (was 0x10a, writing 0xa)
Oct 13 18:41:01 pedro-laptop kernel: [80834.632867] HDA Intel 0000:00:14.2: restoring config space at offset 0x1 (was 0x4100006, writing 0x4100002)
Oct 13 18:41:01 pedro-laptop kernel: [80834.632972] pci 0000:01:05.0: restoring config space at offset 0x1 (was 0x100007, writing 0x100003)
Oct 13 18:41:01 pedro-laptop kernel: [80834.633009] sky2 0000:02:00.0: restoring config space at offset 0xf (was 0x100, writing 0x10a)
Oct 13 18:41:01 pedro-laptop kernel: [80834.633030] sky2 0000:02:00.0: restoring config space at offset 0x6 (was 0x1, writing 0xa001)
Oct 13 18:41:01 pedro-laptop kernel: [80834.633038] sky2 0000:02:00.0: restoring config space at offset 0x4 (was 0x4, writing 0xf0400004)
Oct 13 18:41:01 pedro-laptop kernel: [80834.633044] sky2 0000:02:00.0: restoring config space at offset 0x3 (was 0x0, writing 0x8)
Oct 13 18:41:01 pedro-laptop kernel: [80834.633053] sky2 0000:02:00.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100407)
Oct 13 18:41:01 pedro-laptop kernel: [80834.633117] ath5k 0000:08:00.0: restoring config space at offset 0xf (was 0x100, writing 0x10b)
Oct 13 18:41:01 pedro-laptop kernel: [80834.633141] ath5k 0000:08:00.0: restoring config space at offset 0x4 (was 0x4, writing 0xf0300004)
Oct 13 18:41:01 pedro-laptop kernel: [80834.633148] ath5k 0000:08:00.0: restoring config space at offset 0x3 (was 0x0, writing 0x8)
Oct 13 18:41:01 pedro-laptop kernel: [80834.633156] ath5k 0000:08:00.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100007)
Oct 13 18:41:01 pedro-laptop kernel: [80836.023121] ahci 0000:00:12.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
Oct 13 18:41:01 pedro-laptop kernel: [80836.023195] ohci_hcd 0000:00:13.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
Oct 13 18:41:01 pedro-laptop kernel: [80836.044032] ohci_hcd 0000:00:13.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
Oct 13 18:41:01 pedro-laptop kernel: [80836.068030] ohci_hcd 0000:00:13.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
Oct 13 18:41:01 pedro-laptop kernel: [80836.092026] ohci_hcd 0000:00:13.3: PCI INT B -> GSI 17 (level, low) -> IRQ 17
Oct 13 18:41:01 pedro-laptop kernel: [80836.116026] ohci_hcd 0000:00:13.4: PCI INT C -> GSI 18 (level, low) -> IRQ 18
Oct 13 18:41:01 pedro-laptop kernel: [80836.140026] ehci_hcd 0000:00:13.5: PME# disabled
Oct 13 18:41:01 pedro-laptop kernel: [80836.140032] ehci_hcd 0000:00:13.5: PCI INT D -> GSI 19 (level, low) -> IRQ 19
Oct 13 18:41:01 pedro-laptop kernel: [80836.140051] pata_atiixp 0000:00:14.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
Oct 13 18:41:01 pedro-laptop kernel: [80836.140070] HDA Intel 0000:00:14.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16
Oct 13 18:41:01 pedro-laptop kernel: [80836.140109] pci 0000:01:05.0: PME# disabled
Oct 13 18:41:01 pedro-laptop kernel: [80836.140113] pci 0000:01:05.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
Oct 13 18:41:01 pedro-laptop kernel: [80836.140125] sky2 0000:02:00.0: PME# disabled
Oct 13 18:41:01 pedro-laptop kernel: [80836.140174] ath5k 0000:08:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
Oct 13 18:41:01 pedro-laptop kernel: [80836.304543] ata5.00: ACPI cmd ef/03:0c:00:00:00:a0 filtered out
Oct 13 18:41:01 pedro-laptop kernel: [80836.304547] ata5.00: ACPI cmd ef/03:42:00:00:00:a0 filtered out
Oct 13 18:41:01 pedro-laptop kernel: [80836.320488] ata5.00: configured for UDMA/33
Oct 13 18:41:01 pedro-laptop kernel: [80836.340043] ata2: SATA link down (SStatus 0 SControl 300)
Oct 13 18:41:01 pedro-laptop kernel: [80836.340071] ata3: SATA link down (SStatus 0 SControl 300)
Oct 13 18:41:01 pedro-laptop kernel: [80836.340099] ata4: SATA link down (SStatus 0 SControl 300)
Oct 13 18:41:01 pedro-laptop kernel: [80836.344024] usb 1-9: reset high speed USB device using ehci_hcd and address 2
Oct 13 18:41:01 pedro-laptop kernel: [80836.504021] ata1: softreset failed (device not ready)
Oct 13 18:41:01 pedro-laptop kernel: [80836.504025] ata1: applying SB600 PMP SRST workaround and retrying
Oct 13 18:41:01 pedro-laptop kernel: [80836.578993] sd 0:0:0:0: [sda] Starting disk
Oct 13 18:41:01 pedro-laptop kernel: [80836.668034] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
Oct 13 18:41:02 pedro-laptop NetworkManager: <info>  Waking up...
Oct 13 18:41:02 pedro-laptop NetworkManager: <info>  (eth0): now managed
Oct 13 18:41:02 pedro-laptop NetworkManager: <info>  (eth0): device state change: 1 -> 2 (reason 2)
Oct 13 18:41:02 pedro-laptop NetworkManager: <info>  (eth0): bringing up device.
Oct 13 18:41:02 pedro-laptop NetworkManager: <info>  (eth0): preparing device.
Oct 13 18:41:02 pedro-laptop NetworkManager: <info>  (eth0): deactivating device (reason: 2).
Oct 13 18:41:02 pedro-laptop NetworkManager: <info>  Unmanaged Device found; state CONNECTED forced. (see http://bugs.launchpad.net/bugs/191889)
Oct 13 18:41:02 pedro-laptop NetworkManager: <info>  Unmanaged Device found; state CONNECTED forced. (see http://bugs.launchpad.net/bugs/191889)
Oct 13 18:41:02 pedro-laptop NetworkManager: <info>  (wlan0): now managed
Oct 13 18:41:02 pedro-laptop NetworkManager: <info>  (wlan0): device state change: 1 -> 2 (reason 2)
Oct 13 18:41:02 pedro-laptop NetworkManager: <info>  (wlan0): bringing up device.
Oct 13 18:41:02 pedro-laptop NetworkManager: <info>  (wlan0): preparing device.
Oct 13 18:41:02 pedro-laptop NetworkManager: <info>  (wlan0): deactivating device (reason: 2).
Oct 13 18:41:02 pedro-laptop NetworkManager: <info>  (wlan0): supplicant interface state:  starting -> ready
Oct 13 18:41:02 pedro-laptop NetworkManager: <info>  (wlan0): device state change: 2 -> 3 (reason 42)
Oct 13 18:41:02 pedro-laptop kernel: [80836.668560] ata1.00: SB600 AHCI: limiting to 255 sectors per cmd
Oct 13 18:41:02 pedro-laptop kernel: [80836.669200] ata1.00: SB600 AHCI: limiting to 255 sectors per cmd
Oct 13 18:41:02 pedro-laptop kernel: [80836.669203] ata1.00: configured for UDMA/100
Oct 13 18:41:02 pedro-laptop kernel: [80836.707238] PM: resume devices took 2.072 seconds
Oct 13 18:41:02 pedro-laptop kernel: [80836.707311] PM: Finishing wakeup.
Oct 13 18:41:02 pedro-laptop kernel: [80836.707314] Restarting tasks ... done.
Oct 13 18:41:02 pedro-laptop kernel: [80837.550854] sky2 eth0: enabling interface
Oct 13 18:41:02 pedro-laptop kernel: [80837.551113] ADDRCONF(NETDEV_UP): eth0: link is not ready
Oct 13 18:41:02 pedro-laptop kernel: [80837.600341] ADDRCONF(NETDEV_UP): wlan0: link is not ready
Oct 13 18:41:07 pedro-laptop NetworkManager: <info>  Activation (wlan0) starting connection 'Auto Pedro'
Oct 13 18:41:07 pedro-laptop NetworkManager: <info>  (wlan0): device state change: 3 -> 4 (reason 0)
Oct 13 18:41:07 pedro-laptop NetworkManager: <info>  Activation (wlan0) Stage 1 of 5 (Device Prepare) scheduled...
Oct 13 18:41:07 pedro-laptop NetworkManager: <info>  Activation (wlan0) Stage 1 of 5 (Device Prepare) started...
Oct 13 18:41:07 pedro-laptop NetworkManager: <info>  Activation (wlan0) Stage 2 of 5 (Device Configure) scheduled...
Oct 13 18:41:07 pedro-laptop NetworkManager: <info>  Activation (wlan0) Stage 1 of 5 (Device Prepare) complete.
Oct 13 18:41:07 pedro-laptop NetworkManager: <info>  Activation (wlan0) Stage 2 of 5 (Device Configure) starting...
Oct 13 18:41:07 pedro-laptop NetworkManager: <info>  (wlan0): device state change: 4 -> 5 (reason 0)
Oct 13 18:41:07 pedro-laptop NetworkManager: <info>  Activation (wlan0/wireless): access point 'Auto Pedro' has security, but secrets are required.
Oct 13 18:41:07 pedro-laptop NetworkManager: <info>  (wlan0): device state change: 5 -> 6 (reason 0)
Oct 13 18:41:07 pedro-laptop NetworkManager: <info>  Activation (wlan0) Stage 2 of 5 (Device Configure) complete.
Oct 13 18:41:07 pedro-laptop NetworkManager: <info>  Activation (wlan0) Stage 1 of 5 (Device Prepare) scheduled...
Oct 13 18:41:07 pedro-laptop NetworkManager: <info>  Activation (wlan0) Stage 1 of 5 (Device Prepare) started...
Oct 13 18:41:07 pedro-laptop NetworkManager: <info>  (wlan0): device state change: 6 -> 4 (reason 0)
Oct 13 18:41:07 pedro-laptop NetworkManager: <info>  Activation (wlan0) Stage 2 of 5 (Device Configure) scheduled...
Oct 13 18:41:07 pedro-laptop NetworkManager: <info>  Activation (wlan0) Stage 1 of 5 (Device Prepare) complete.
Oct 13 18:41:07 pedro-laptop NetworkManager: <info>  Activation (wlan0) Stage 2 of 5 (Device Configure) starting...
Oct 13 18:41:07 pedro-laptop NetworkManager: <info>  (wlan0): device state change: 4 -> 5 (reason 0)
Oct 13 18:41:07 pedro-laptop NetworkManager: <info>  Activation (wlan0/wireless): connection 'Auto Pedro' has security, and secrets exist.  No new secrets needed.
Oct 13 18:41:07 pedro-laptop NetworkManager: <info>  Config: added 'ssid' value 'Pedro'
Oct 13 18:41:07 pedro-laptop NetworkManager: <info>  Config: added 'scan_ssid' value '1'
Oct 13 18:41:07 pedro-laptop NetworkManager: <info>  Config: added 'key_mgmt' value 'WPA-PSK'
Oct 13 18:41:07 pedro-laptop NetworkManager: <info>  Config: added 'psk' value '<omitted>'
Oct 13 18:41:07 pedro-laptop NetworkManager: nm_setting_802_1x_get_pkcs11_engine_path: assertion `NM_IS_SETTING_802_1X (setting)' failed
Oct 13 18:41:07 pedro-laptop NetworkManager: nm_setting_802_1x_get_pkcs11_module_path: assertion `NM_IS_SETTING_802_1X (setting)' failed
Oct 13 18:41:07 pedro-laptop NetworkManager: <info>  Activation (wlan0) Stage 2 of 5 (Device Configure) complete.
Oct 13 18:41:07 pedro-laptop NetworkManager: <info>  Config: set interface ap_scan to 1
Oct 13 18:41:07 pedro-laptop NetworkManager: <info>  (wlan0): supplicant connection state:  scanning -> disconnected
Oct 13 18:41:12 pedro-laptop NetworkManager: <info>  (wlan0): supplicant connection state:  disconnected -> scanning
Oct 13 18:41:13 pedro-laptop NetworkManager: <info>  (wlan0): supplicant connection state:  scanning -> associating
Oct 13 18:41:13 pedro-laptop NetworkManager: <info>  (wlan0): supplicant connection state:  associating -> associated
Oct 13 18:41:13 pedro-laptop NetworkManager: <info>  (wlan0): supplicant connection state:  associated -> 4-way handshake
Oct 13 18:41:13 pedro-laptop NetworkManager: <info>  (wlan0): supplicant connection state:  4-way handshake -> group handshake
Oct 13 18:41:13 pedro-laptop NetworkManager: <info>  (wlan0): supplicant connection state:  group handshake -> completed
Oct 13 18:41:13 pedro-laptop NetworkManager: <info>  Activation (wlan0/wireless) Stage 2 of 5 (Device Configure) successful.  Connected to wireless network 'Pedro'.
Oct 13 18:41:13 pedro-laptop NetworkManager: <info>  Activation (wlan0) Stage 3 of 5 (IP Configure Start) scheduled.
Oct 13 18:41:13 pedro-laptop NetworkManager: <info>  Activation (wlan0) Stage 3 of 5 (IP Configure Start) started...
Oct 13 18:41:13 pedro-laptop NetworkManager: <info>  (wlan0): device state change: 5 -> 7 (reason 0)
Oct 13 18:41:13 pedro-laptop NetworkManager: <info>  Activation (wlan0) Beginning DHCP transaction (timeout in 45 seconds)
Oct 13 18:41:13 pedro-laptop NetworkManager: <info>  dhclient started with pid 22399
Oct 13 18:41:13 pedro-laptop NetworkManager: <info>  Activation (wlan0) Stage 4 of 5 (IP6 Configure Get) scheduled...
Oct 13 18:41:13 pedro-laptop dhclient: Internet Systems Consortium DHCP Client V3.1.2
Oct 13 18:41:13 pedro-laptop dhclient: Copyright 2004-2008 Internet Systems Consortium.
Oct 13 18:41:13 pedro-laptop NetworkManager: <info>  Activation (wlan0) Stage 3 of 5 (IP Configure Start) complete.
Oct 13 18:41:13 pedro-laptop NetworkManager: <info>  Activation (wlan0) Stage 4 of 5 (IP6 Configure Get) started...
Oct 13 18:41:13 pedro-laptop NetworkManager: <info>  Activation (wlan0) Stage 4 of 5 (IP6 Configure Get) complete.
Oct 13 18:41:13 pedro-laptop dhclient: All rights reserved.
Oct 13 18:41:13 pedro-laptop dhclient: For info, please visit http://www.isc.org/sw/dhcp/
Oct 13 18:41:13 pedro-laptop dhclient: 
Oct 13 18:41:13 pedro-laptop NetworkManager: <info>  DHCP: device wlan0 state changed normal exit -> preinit
Oct 13 18:41:13 pedro-laptop dhclient: Listening on LPF/wlan0/00:15:af:52:f9:6c
Oct 13 18:41:13 pedro-laptop dhclient: Sending on   LPF/wlan0/00:15:af:52:f9:6c
Oct 13 18:41:13 pedro-laptop dhclient: Sending on   Socket/fallback
Oct 13 18:41:14 pedro-laptop dhclient: DHCPREQUEST of 192.168.0.142 on wlan0 to 255.255.255.255 port 67
Oct 13 18:41:14 pedro-laptop dhclient: DHCPACK of 192.168.0.142 from 192.168.0.1
Oct 13 18:41:14 pedro-laptop NetworkManager: <info>  DHCP: device wlan0 state changed preinit -> reboot
Oct 13 18:41:14 pedro-laptop NetworkManager: <info>  Activation (wlan0) Stage 4 of 5 (IP4 Configure Get) scheduled...
Oct 13 18:41:14 pedro-laptop NetworkManager: <info>  Activation (wlan0) Stage 4 of 5 (IP4 Configure Get) started...
Oct 13 18:41:14 pedro-laptop NetworkManager: <info>    address 192.168.0.142
Oct 13 18:41:14 pedro-laptop NetworkManager: <info>    prefix 24 (255.255.255.0)
Oct 13 18:41:14 pedro-laptop NetworkManager: <info>    gateway 192.168.0.1
Oct 13 18:41:14 pedro-laptop NetworkManager: <info>    nameserver '201.10.120.3'
Oct 13 18:41:14 pedro-laptop NetworkManager: <info>    nameserver '192.168.0.1'
Oct 13 18:41:14 pedro-laptop NetworkManager: <info>  Activation (wlan0) Stage 5 of 5 (IP Configure Commit) scheduled...
Oct 13 18:41:14 pedro-laptop NetworkManager: <info>  Activation (wlan0) Stage 4 of 5 (IP4 Configure Get) complete.
Oct 13 18:41:14 pedro-laptop NetworkManager: <info>  Activation (wlan0) Stage 5 of 5 (IP Configure Commit) started...
Oct 13 18:41:14 pedro-laptop dhclient: bound to 192.168.0.142 -- renewal in 478203 seconds.
Oct 13 18:41:15 pedro-laptop NetworkManager: <info>  (wlan0): device state change: 7 -> 8 (reason 0)
Oct 13 18:41:15 pedro-laptop NetworkManager: <info>  Policy set 'Auto Pedro' (wlan0) as default for routing and DNS.
Oct 13 18:41:15 pedro-laptop NetworkManager: <info>  Activation (wlan0) successful, device activated.
Oct 13 18:41:15 pedro-laptop NetworkManager: <info>  Activation (wlan0) Stage 5 of 5 (IP Configure Commit) complete.
Oct 13 19:34:08 pedro-laptop kernel: [80838.420146] [drm] Loading RS600 Microcode
Oct 13 19:34:08 pedro-laptop kernel: [80838.420222] [drm] Num pipes: 1
Oct 13 19:34:08 pedro-laptop kernel: [80849.149416] wlan0: authenticate with AP 00:21:91:6b:a4:3c
Oct 13 19:34:08 pedro-laptop kernel: [80849.150967] wlan0: authenticated
Oct 13 19:34:08 pedro-laptop kernel: [80849.150974] wlan0: associate with AP 00:21:91:6b:a4:3c
Oct 13 19:34:08 pedro-laptop kernel: [80849.153392] wlan0: RX AssocResp from 00:21:91:6b:a4:3c (capab=0x431 status=0 aid=2)
Oct 13 19:34:08 pedro-laptop kernel: [80849.153400] wlan0: associated
Oct 13 19:34:08 pedro-laptop kernel: [80849.154976] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
Oct 13 19:34:08 pedro-laptop kernel: [80859.325041] wlan0: no IPv6 routers present
Oct 13 20:27:28 pedro-laptop NetworkManager: <WARN>  nm_signal_handler(): Caught signal 15, shutting down normally.
Oct 13 20:27:29 pedro-laptop NetworkManager: <info>  (eth0): cleaning up...
Oct 13 20:27:29 pedro-laptop NetworkManager: <info>  (eth0): taking down device.
Oct 13 20:27:29 pedro-laptop NetworkManager: <info>  (wlan0): deactivating device (reason: 36).
Oct 13 20:27:29 pedro-laptop kernel: Kernel logging (proc) stopped.
Oct 13 20:28:18 pedro-laptop kernel: imklog 4.2.0, log source = /var/run/rsyslog/kmsg started.
Oct 13 20:28:19 pedro-laptop kernel: [    0.000000] Initializing cgroup subsys cpuset
Oct 13 20:28:19 pedro-laptop kernel: [    0.000000] Initializing cgroup subsys cpu
Oct 13 20:28:19 pedro-laptop kernel: [    0.000000] Linux version 2.6.31-13-generic (buildd@rothera) (gcc version 4.4.1 (Ubuntu 4.4.1-4ubuntu7) ) #45-Ubuntu SMP Tue Oct 13 02:08:03 UTC 2009 (Ubuntu 2.6.31-13.45-generic)
Oct 13 20:28:19 pedro-laptop kernel: [    0.000000] KERNEL supported cpus:
Oct 13 20:28:19 pedro-laptop kernel: [    0.000000]   Intel GenuineIntel
Oct 13 20:28:19 pedro-laptop kernel: [    0.000000]   AMD AuthenticAMD
Oct 13 20:28:19 pedro-laptop kernel: [    0.000000]   NSC Geode by NSC
Oct 13 20:28:19 pedro-laptop kernel: [    0.000000]   Cyrix CyrixInstead
Oct 13 20:28:19 pedro-laptop kernel: [    0.000000]   Centaur CentaurHauls
Oct 13 20:28:19 pedro-laptop kernel: [    0.000000]   Transmeta GenuineTMx86
Oct 13 20:28:19 pedro-laptop kernel: [    0.000000]   Transmeta TransmetaCPU
Oct 13 20:28:19 pedro-laptop kernel: [    0.000000]   UMC UMC UMC UMC
Oct 13 20:28:19 pedro-laptop kernel: [    0.000000] BIOS-provided physical RAM map:
Oct 13 20:28:19 pedro-laptop kernel: [    0.000000]  BIOS-e820: 0000000000000000 - 000000000009dc00 (usable)
Oct 13 20:28:19 pedro-laptop kernel: [    0.000000]  BIOS-e820: 000000000009dc00 - 00000000000a0000 (reserved)
Oct 13 20:28:19 pedro-laptop kernel: [    0.000000]  BIOS-e820: 00000000000ce000 - 00000000000d0000 (reserved)
Oct 13 20:28:19 pedro-laptop kernel: [    0.000000]  BIOS-e820: 00000000000dc000 - 00000000000e0000 (reserved)
Oct 13 20:28:19 pedro-laptop kernel: [    0.000000]  BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
Oct 13 20:28:19 pedro-laptop kernel: [    0.000000]  BIOS-e820: 0000000000100000 - 000000008fe80000 (usable)
Oct 13 20:28:19 pedro-laptop kernel: [    0.000000]  BIOS-e820: 000000008fe80000 - 000000008fe98000 (ACPI data)
Oct 13 20:28:19 pedro-laptop kernel: [    0.000000]  BIOS-e820: 000000008fe98000 - 000000008fe9a000 (ACPI NVS)
Oct 13 20:28:19 pedro-laptop kernel: [    0.000000]  BIOS-e820: 000000008fe9a000 - 0000000090000000 (reserved)
Oct 13 20:28:19 pedro-laptop kernel: [    0.000000]  BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
Oct 13 20:28:19 pedro-laptop kernel: [    0.000000]  BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
Oct 13 20:28:19 pedro-laptop kernel: [    0.000000]  BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
Oct 13 20:28:19 pedro-laptop kernel: [    0.000000]  BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
Oct 13 20:28:19 pedro-laptop kernel: [    0.000000] DMI present.
Oct 13 20:28:19 pedro-laptop kernel: [    0.000000] Phoenix BIOS detected: BIOS may corrupt low RAM, working around it.
Oct 13 20:28:19 pedro-laptop kernel: [    0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
Oct 13 20:28:19 pedro-laptop kernel: [    0.000000] last_pfn = 0x8fe80 max_arch_pfn = 0x100000
Oct 13 20:28:19 pedro-laptop kernel: [    0.000000] MTRR default type: uncachable
Oct 13 20:28:19 pedro-laptop kernel: [    0.000000] MTRR fixed ranges enabled:
Oct 13 20:28:19 pedro-laptop kernel: [    0.000000]   00000-9FFFF write-back
Oct 13 20:28:19 pedro-laptop kernel: [    0.000000]   A0000-BFFFF uncachable
Oct 13 20:28:19 pedro-laptop kernel: [    0.000000]   C0000-CFFFF write-protect
Oct 13 20:28:19 pedro-laptop kernel: [    0.000000]   D0000-DFFFF uncachable
Oct 13 20:28:19 pedro-laptop kernel: [    0.000000]   E0000-FFFFF write-protect
Oct 13 20:28:19 pedro-laptop kernel: [    0.000000] MTRR variable ranges enabled:
Oct 13 20:28:19 pedro-laptop kernel: [    0.000000]   0 base 000000000 mask F80000000 write-back
Oct 13 20:28:19 pedro-laptop kernel: [    0.000000]   1 base 080000000 mask FF0000000 write-back
Oct 13 20:28:19 pedro-laptop kernel: [    0.000000]   2 base 08FF00000 mask FFFF00000 uncachable
Oct 13 20:28:19 pedro-laptop kernel: [    0.000000]   3 disabled
Oct 13 20:28:19 pedro-laptop kernel: [    0.000000]   4 disabled
Oct 13 20:28:19 pedro-laptop kernel: [    0.000000]   5 disabled
Oct 13 20:28:19 pedro-laptop kernel: [    0.000000]   6 disabled
Oct 13 20:28:19 pedro-laptop kernel: [    0.000000]   7 disabled
Oct 13 20:28:19 pedro-laptop kernel: [    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
Oct 13 20:28:19 pedro-laptop kernel: [    0.000000] Scanning 0 areas for low memory corruption
Oct 13 20:28:19 pedro-laptop kernel: [    0.000000] modified physical RAM map:
Oct 13 20:28:19 pedro-laptop kernel: [    0.000000]  modified: 0000000000000000 - 0000000000010000 (reserved)
Oct 13 20:28:19 pedro-laptop kernel: [    0.000000]  modified: 0000000000010000 - 000000000009dc00 (usable)
Oct 13 20:28:19 pedro-laptop kernel: [    0.000000]  modified: 000000000009dc00 - 00000000000a0000 (reserved)
Oct 13 20:28:19 pedro-laptop kernel: [    0.000000]  modified: 00000000000ce000 - 00000000000d0000 (reserved)
Oct 13 20:28:19 pedro-laptop kernel: [    0.000000]  modified: 00000000000dc000 - 00000000000e0000 (reserved)
Oct 13 20:28:19 pedro-laptop kernel: [    0.000000]  modified: 00000000000e4000 - 0000000000100000 (reserved)
Oct 13 20:28:19 pedro-laptop kernel: [    0.000000]  modified: 0000000000100000 - 000000008fe80000 (usable)
Oct 13 20:28:19 pedro-laptop kernel: [    0.000000]  modified: 000000008fe80000 - 000000008fe98000 (ACPI data)
Oct 13 20:28:19 pedro-laptop kernel: [    0.000000]  modified: 000000008fe98000 - 000000008fe9a000 (ACPI NVS)
Oct 13 20:28:19 pedro-laptop kernel: [    0.000000]  modified: 000000008fe9a000 - 0000000090000000 (reserved)
Oct 13 20:28:19 pedro-laptop kernel: [    0.000000]  modified: 00000000e0000000 - 00000000f0000000 (reserved)
Oct 13 20:28:19 pedro-laptop kernel: [    0.000000]  modified: 00000000fec00000 - 00000000fec10000 (reserved)
Oct 13 20:28:19 pedro-laptop kernel: [    0.000000]  modified: 00000000fee00000 - 00000000fee01000 (reserved)
Oct 13 20:28:19 pedro-laptop kernel: [    0.000000]  modified: 00000000fff00000 - 0000000100000000 (reserved)
Oct 13 20:28:19 pedro-laptop kernel: [    0.000000] initial memory mapped : 0 - 00c00000
Oct 13 20:28:19 pedro-laptop kernel: [    0.000000] init_memory_mapping: 0000000000000000-00000000377fe000
Oct 13 20:28:19 pedro-laptop kernel: [    0.000000] Using x86 segment limits to approximate NX protection
Oct 13 20:28:19 pedro-laptop kernel: [    0.000000]  0000000000 - 0000400000 page 4k
Oct 13 20:28:19 pedro-laptop kernel: [    0.000000]  0000400000 - 0037400000 page 2M
Oct 13 20:28:19 pedro-laptop kernel: [    0.000000]  0037400000 - 00377fe000 page 4k
Oct 13 20:28:19 pedro-laptop kernel: [    0.000000] kernel direct mapping tables up to 377fe000 @ 10000-15000
Oct 13 20:28:19 pedro-laptop kernel: [    0.000000] RAMDISK: 3789e000 - 37fef600
Oct 13 20:28:19 pedro-laptop kernel: [    0.000000] Allocated new RAMDISK: 008a6000 - 00ff7600
Oct 13 20:28:19 pedro-laptop kernel: [    0.000000] Move RAMDISK from 000000003789e000 - 0000000037fef5ff to 008a6000 - 00ff75ff
Oct 13 20:28:19 pedro-laptop kernel: [    0.000000] ACPI: RSDP 000f7e90 00024 (v02 PTLTD )
Oct 13 20:28:19 pedro-laptop kernel: [    0.000000] ACPI: XSDT 8fe89de0 0006C (v01 LGE    LGPC     06040000  LTP 00000000)
Oct 13 20:28:19 pedro-laptop kernel: [    0.000000] ACPI: TCPA 8fe97c9c 00032 (v02 INTEL           06040000 PTEC 00000000)
Oct 13 20:28:19 pedro-laptop kernel: [    0.000000] ACPI: FACP 8fe97cce 000F4 (v03 ATI    Alfonsin 06040000 ATI  000F4240)
Oct 13 20:28:19 pedro-laptop kernel: [    0.000000] ACPI: DSDT 8fe8d752 0A4D6 (v01    LGE  LHOTSE2 06040000 MSFT 0100000E)
Oct 13 20:28:19 pedro-laptop kernel: [    0.000000] ACPI: FACS 8fe99fc0 00040
Oct 13 20:28:19 pedro-laptop kernel: [    0.000000] ACPI: SLIC 8fe97dc2 00176 (v01 LGE    LGPC     06040000 YSB  00000001)
Oct 13 20:28:19 pedro-laptop kernel: [    0.000000] ACPI: APIC 8fe97f38 00054 (v01 PTLTD  	 APIC   06040000  LTP 00000000)
Oct 13 20:28:19 pedro-laptop kernel: [    0.000000] ACPI: MCFG 8fe97f8c 0003C (v01 PTLTD    MCFG   06040000  LTP 00000000)
Oct 13 20:28:19 pedro-laptop kernel: [    0.000000] ACPI: HPET 8fe97fc8 00038 (v01 PTLTD  HPETTBL  06040000  LTP 00000001)
Oct 13 20:28:19 pedro-laptop kernel: [    0.000000] ACPI: SSDT 8fe8b2f7 0025F (v01  PmRef  Cpu0Tst 00003000 INTL 20050228)
Oct 13 20:28:19 pedro-laptop kernel: [    0.000000] ACPI: SSDT 8fe8b251 000A6 (v01  PmRef  Cpu1Tst 00003000 INTL 20050228)
Oct 13 20:28:19 pedro-laptop kernel: [    0.000000] ACPI: SSDT 8fe89e4c 01405 (v01  PmRef    CpuPm 00003000 INTL 20050228)
Oct 13 20:28:19 pedro-laptop kernel: [    0.000000] ACPI: Local APIC address 0xfee00000
Oct 13 20:28:19 pedro-laptop kernel: [    0.000000] 1414MB HIGHMEM available.
Oct 13 20:28:19 pedro-laptop kernel: [    0.000000] 887MB LOWMEM available.
Oct 13 20:28:19 pedro-laptop kernel: [    0.000000]   mapped low ram: 0 - 377fe000
Oct 13 20:28:19 pedro-laptop kernel: [    0.000000]   low ram: 0 - 377fe000
Oct 13 20:28:19 pedro-laptop kernel: [    0.000000]   node 0 low ram: 00000000 - 377fe000
Oct 13 20:28:19 pedro-laptop kernel: [    0.000000]   node 0 bootmap 00011000 - 00017f00
Oct 13 20:28:19 pedro-laptop kernel: [    0.000000] (9 early reservations) ==> bootmem [0000000000 - 00377fe000]
Oct 13 20:28:19 pedro-laptop kernel: [    0.000000]   #0 [0000000000 - 0000001000]   BIOS data page ==> [0000000000 - 0000001000]
Oct 13 20:28:19 pedro-laptop kernel: [    0.000000]   #1 [0000001000 - 0000002000]    EX TRAMPOLINE ==> [0000001000 - 0000002000]
Oct 13 20:28:19 pedro-laptop kernel: [    0.000000]   #2 [0000006000 - 0000007000]       TRAMPOLINE ==> [0000006000 - 0000007000]
Oct 13 20:28:19 pedro-laptop kernel: [    0.000000]   #3 [0000100000 - 00008a10a0]    TEXT DATA BSS ==> [0000100000 - 00008a10a0]
Oct 13 20:28:19 pedro-laptop kernel: [    0.000000]   #4 [000009dc00 - 0000100000]    BIOS reserved ==> [000009dc00 - 0000100000]
Oct 13 20:28:19 pedro-laptop kernel: [    0.000000]   #5 [00008a2000 - 00008a5134]              BRK ==> [00008a2000 - 00008a5134]
Oct 13 20:28:19 pedro-laptop kernel: [    0.000000]   #6 [0000010000 - 0000011000]          PGTABLE ==> [0000010000 - 0000011000]
Oct 13 20:28:19 pedro-laptop kernel: [    0.000000]   #7 [00008a6000 - 0000ff7600]      NEW RAMDISK ==> [00008a6000 - 0000ff7600]
Oct 13 20:28:19 pedro-laptop kernel: [    0.000000]   #8 [0000011000 - 0000018000]          BOOTMAP ==> [0000011000 - 0000018000]
Oct 13 20:28:19 pedro-laptop kernel: [    0.000000] found SMP MP-table at [c00f7ec0] f7ec0
Oct 13 20:28:19 pedro-laptop kernel: [    0.000000] Zone PFN ranges:
Oct 13 20:28:19 pedro-laptop kernel: [    0.000000]   DMA      0x00000010 -> 0x00001000
Oct 13 20:28:19 pedro-laptop kernel: [    0.000000]   Normal   0x00001000 -> 0x000377fe
Oct 13 20:28:19 pedro-laptop kernel: [    0.000000]   HighMem  0x000377fe -> 0x0008fe80
Oct 13 20:28:19 pedro-laptop kernel: [    0.000000] Movable zone start PFN for each node
Oct 13 20:28:19 pedro-laptop kernel: [    0.000000] early_node_map[2] active PFN ranges
Oct 13 20:28:19 pedro-laptop kernel: [    0.000000]     0: 0x00000010 -> 0x0000009d
Oct 13 20:28:19 pedro-laptop kernel: [    0.000000]     0: 0x00000100 -> 0x0008fe80
Oct 13 20:28:19 pedro-laptop kernel: [    0.000000] On node 0 totalpages: 589325
Oct 13 20:28:19 pedro-laptop kernel: [    0.000000] free_area_init_node: node 0, pgdat c077d860, node_mem_map c1000200
Oct 13 20:28:19 pedro-laptop kernel: [    0.000000]   DMA zone: 32 pages used for memmap
Oct 13 20:28:19 pedro-laptop kernel: [    0.000000]   DMA zone: 0 pages reserved
Oct 13 20:28:19 pedro-laptop kernel: [    0.000000]   DMA zone: 3949 pages, LIFO batch:0
Oct 13 20:28:19 pedro-laptop kernel: [    0.000000]   Normal zone: 1744 pages used for memmap
Oct 13 20:28:19 pedro-laptop kernel: [    0.000000]   Normal zone: 221486 pages, LIFO batch:31
Oct 13 20:28:19 pedro-laptop kernel: [    0.000000]   HighMem zone: 2830 pages used for memmap
Oct 13 20:28:19 pedro-laptop kernel: [    0.000000]   HighMem zone: 359284 pages, LIFO batch:31
Oct 13 20:28:19 pedro-laptop kernel: [    0.000000] Using APIC driver default
Oct 13 20:28:19 pedro-laptop kernel: [    0.000000] ACPI: PM-Timer IO Port: 0x8008
Oct 13 20:28:19 pedro-laptop kernel: [    0.000000] ACPI: Local APIC address 0xfee00000
Oct 13 20:28:19 pedro-laptop kernel: [    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
Oct 13 20:28:19 pedro-laptop kernel: [    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
Oct 13 20:28:19 pedro-laptop kernel: [    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
Oct 13 20:28:19 pedro-laptop kernel: [    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
Oct 13 20:28:19 pedro-laptop kernel: [    0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
Oct 13 20:28:19 pedro-laptop kernel: [    0.000000] IOAPIC[0]: apic_id 2, version 33, address 0xfec00000, GSI 0-23
Oct 13 20:28:19 pedro-laptop kernel: [    0.000000] ACPI: IRQ9 used by override.
Oct 13 20:28:19 pedro-laptop kernel: [    0.000000] Enabling APIC mode:  Flat.  Using 1 I/O APICs
Oct 13 20:28:19 pedro-laptop kernel: [    0.000000] Using ACPI (MADT) for SMP configuration information
Oct 13 20:28:19 pedro-laptop kernel: [    0.000000] ACPI: HPET id: 0x43538301 base: 0xfed00000
Oct 13 20:28:19 pedro-laptop kernel: [    0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
Oct 13 20:28:19 pedro-laptop kernel: [    0.000000] nr_irqs_gsi: 24
Oct 13 20:28:19 pedro-laptop kernel: [    0.000000] PM: Registered nosave memory: 000000000009d000 - 000000000009e000
Oct 13 20:28:19 pedro-laptop kernel: [    0.000000] PM: Registered nosave memory: 000000000009e000 - 00000000000a0000
Oct 13 20:28:19 pedro-laptop kernel: [    0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000ce000
Oct 13 20:28:19 pedro-laptop kernel: [    0.000000] PM: Registered nosave memory: 00000000000ce000 - 00000000000d0000
Oct 13 20:28:19 pedro-laptop kernel: [    0.000000] PM: Registered nosave memory: 00000000000d0000 - 00000000000dc000
Oct 13 20:28:19 pedro-laptop kernel: [    0.000000] PM: Registered nosave memory: 00000000000dc000 - 00000000000e0000
Oct 13 20:28:19 pedro-laptop kernel: [    0.000000] PM: Registered nosave memory: 00000000000e0000 - 00000000000e4000
Oct 13 20:28:19 pedro-laptop kernel: [    0.000000] PM: Registered nosave memory: 00000000000e4000 - 0000000000100000
Oct 13 20:28:19 pedro-laptop kernel: [    0.000000] Allocating PCI resources starting at 90000000 (gap: 90000000:50000000)
Oct 13 20:28:19 pedro-laptop kernel: [    0.000000] NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1
Oct 13 20:28:19 pedro-laptop kernel: [    0.000000] PERCPU: Embedded 14 pages at c220a000, static data 35068 bytes
Oct 13 20:28:19 pedro-laptop kernel: [    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 584719
Oct 13 20:28:19 pedro-laptop kernel: [    0.000000] Kernel command line: root=UUID=25e5a657-6cf2-4ca7-9466-87e9ad8705f3 ro locale=pt_BR quiet splash 
Oct 13 20:28:19 pedro-laptop kernel: [    0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes)
Oct 13 20:28:19 pedro-laptop kernel: [    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Oct 13 20:28:19 pedro-laptop kernel: [    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Oct 13 20:28:19 pedro-laptop kernel: [    0.000000] Enabling fast FPU save and restore... done.
Oct 13 20:28:19 pedro-laptop kernel: [    0.000000] Enabling unmasked SIMD FPU exception support... done.
Oct 13 20:28:19 pedro-laptop kernel: [    0.000000] Initializing CPU#0
Oct 13 20:28:19 pedro-laptop kernel: [    0.000000] allocated 11788480 bytes of page_cgroup
Oct 13 20:28:19 pedro-laptop kernel: [    0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
Oct 13 20:28:19 pedro-laptop kernel: [    0.000000] Initializing HighMem for node 0 (000377fe:0008fe80)
Oct 13 20:28:19 pedro-laptop kernel: [    0.000000] Memory: 2310220k/2357760k available (4548k kernel code, 46240k reserved, 2131k data, 540k init, 1448456k highmem)
Oct 13 20:28:19 pedro-laptop kernel: [    0.000000] virtual kernel memory layout:
Oct 13 20:28:19 pedro-laptop kernel: [    0.000000]     fixmap  : 0xfff1d000 - 0xfffff000   ( 904 kB)
Oct 13 20:28:19 pedro-laptop kernel: [    0.000000]     pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
Oct 13 20:28:19 pedro-laptop kernel: [    0.000000]     vmalloc : 0xf7ffe000 - 0xff7fe000   ( 120 MB)
Oct 13 20:28:19 pedro-laptop kernel: [    0.000000]     lowmem  : 0xc0000000 - 0xf77fe000   ( 887 MB)
Oct 13 20:28:19 pedro-laptop kernel: [    0.000000]       .init : 0xc0787000 - 0xc080e000   ( 540 kB)
Oct 13 20:28:19 pedro-laptop kernel: [    0.000000]       .data : 0xc0571384 - 0xc0786208   (2131 kB)
Oct 13 20:28:19 pedro-laptop kernel: [    0.000000]       .text : 0xc0100000 - 0xc0571384   (4548 kB)
Oct 13 20:28:19 pedro-laptop kernel: [    0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
Oct 13 20:28:19 pedro-laptop kernel: [    0.000000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
Oct 13 20:28:19 pedro-laptop kernel: [    0.000000] NR_IRQS:2304 nr_irqs:424
Oct 13 20:28:19 pedro-laptop kernel: [    0.000000] Fast TSC calibration using PIT
Oct 13 20:28:19 pedro-laptop kernel: [    0.000000] Detected 1596.016 MHz processor.
Oct 13 20:28:19 pedro-laptop kernel: [    0.000887] Console: colour VGA+ 80x25
Oct 13 20:28:19 pedro-laptop kernel: [    0.000891] console [tty0] enabled
Oct 13 20:28:19 pedro-laptop kernel: [    0.001105] hpet clockevent registered
Oct 13 20:28:19 pedro-laptop kernel: [    0.001111] HPET: 4 timers in total, 0 timers will be used for per-cpu timer
Oct 13 20:28:19 pedro-laptop kernel: [    0.004012] Calibrating delay loop (skipped), value calculated using timer frequency.. 3192.03 BogoMIPS (lpj=6384064)
Oct 13 20:28:19 pedro-laptop kernel: [    0.004037] Security Framework initialized
Oct 13 20:28:19 pedro-laptop kernel: [    0.004066] AppArmor: AppArmor initialized
Oct 13 20:28:19 pedro-laptop kernel: [    0.004075] Mount-cache hash table entries: 512
Oct 13 20:28:19 pedro-laptop kernel: [    0.004254] Initializing cgroup subsys ns
Oct 13 20:28:19 pedro-laptop kernel: [    0.004261] Initializing cgroup subsys cpuacct
Oct 13 20:28:19 pedro-laptop kernel: [    0.004266] Initializing cgroup subsys memory
Oct 13 20:28:19 pedro-laptop kernel: [    0.004275] Initializing cgroup subsys freezer
Oct 13 20:28:19 pedro-laptop kernel: [    0.004278] Initializing cgroup subsys net_cls
Oct 13 20:28:19 pedro-laptop kernel: [    0.004295] CPU: L1 I cache: 32K, L1 D cache: 32K
Oct 13 20:28:19 pedro-laptop kernel: [    0.004299] CPU: L2 cache: 1024K
Oct 13 20:28:19 pedro-laptop kernel: [    0.004302] CPU: Physical Processor ID: 0
Oct 13 20:28:19 pedro-laptop kernel: [    0.004304] CPU: Processor Core ID: 0
Oct 13 20:28:19 pedro-laptop kernel: [    0.004308] using mwait in idle threads.
Oct 13 20:28:19 pedro-laptop kernel: [    0.004317] Performance Counters: Core2 events, Intel PMU driver.
Oct 13 20:28:19 pedro-laptop kernel: [    0.004330] ... version:                 2
Oct 13 20:28:19 pedro-laptop kernel: [    0.004332] ... bit width:               40
Oct 13 20:28:19 pedro-laptop kernel: [    0.004334] ... generic counters:        2
Oct 13 20:28:19 pedro-laptop kernel: [    0.004336] ... value mask:              000000ffffffffff
Oct 13 20:28:19 pedro-laptop kernel: [    0.004339] ... max period:              000000007fffffff
Oct 13 20:28:19 pedro-laptop kernel: [    0.004341] ... fixed-purpose counters:  3
Oct 13 20:28:19 pedro-laptop kernel: [    0.004343] ... counter mask:            0000000700000003
Oct 13 20:28:19 pedro-laptop kernel: [    0.004348] Checking 'hlt' instruction... OK.
Oct 13 20:28:19 pedro-laptop kernel: [    0.023240] ACPI: Core revision 20090521
Oct 13 20:28:19 pedro-laptop kernel: [    0.044407] ..TIMER: vector=0x30 apic1=0 pin1=0 apic2=-1 pin2=-1
Oct 13 20:28:19 pedro-laptop kernel: [    0.048001] ..MP-BIOS bug: 8254 timer not connected to IO-APIC
Oct 13 20:28:19 pedro-laptop kernel: [    0.048001] ...trying to set up timer (IRQ0) through the 8259A ...
Oct 13 20:28:19 pedro-laptop kernel: [    0.048001] ..... (found apic 0 pin 0) ...
Oct 13 20:28:19 pedro-laptop kernel: [    0.088482] ....... works.
Oct 13 20:28:19 pedro-laptop kernel: [    0.088484] CPU0: Intel(R) Pentium(R) Dual  CPU  T2330  @ 1.60GHz stepping 0d
Oct 13 20:28:19 pedro-laptop kernel: [    0.092001] Booting processor 1 APIC 0x1 ip 0x6000
Oct 13 20:28:19 pedro-laptop kernel: [    0.004000] Initializing CPU#1
Oct 13 20:28:19 pedro-laptop kernel: [    0.004000] Calibrating delay using timer specific routine.. 3192.14 BogoMIPS (lpj=6384297)
Oct 13 20:28:19 pedro-laptop kernel: [    0.004000] CPU: L1 I cache: 32K, L1 D cache: 32K
Oct 13 20:28:19 pedro-laptop kernel: [    0.004000] CPU: L2 cache: 1024K
Oct 13 20:28:19 pedro-laptop kernel: [    0.004000] CPU: Physical Processor ID: 0
Oct 13 20:28:19 pedro-laptop kernel: [    0.004000] CPU: Processor Core ID: 1
Oct 13 20:28:19 pedro-laptop kernel: [    0.004000] x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106
Oct 13 20:28:19 pedro-laptop kernel: [    0.177937] CPU1: Intel(R) Pentium(R) Dual  CPU  T2330  @ 1.60GHz stepping 0d
Oct 13 20:28:19 pedro-laptop kernel: [    0.177954] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
Oct 13 20:28:19 pedro-laptop kernel: [    0.180029] Brought up 2 CPUs
Oct 13 20:28:19 pedro-laptop kernel: [    0.180032] Total of 2 processors activated (6384.18 BogoMIPS).
Oct 13 20:28:19 pedro-laptop kernel: [    0.180083] CPU0 attaching sched-domain:
Oct 13 20:28:19 pedro-laptop kernel: [    0.180087]  domain 0: span 0-1 level MC
Oct 13 20:28:19 pedro-laptop kernel: [    0.180090]   groups: 0 1
Oct 13 20:28:19 pedro-laptop kernel: [    0.180097] CPU1 attaching sched-domain:
Oct 13 20:28:19 pedro-laptop kernel: [    0.180100]  domain 0: span 0-1 level MC
Oct 13 20:28:19 pedro-laptop kernel: [    0.180103]   groups: 1 0
Oct 13 20:28:19 pedro-laptop kernel: [    0.180201] Booting paravirtualized kernel on bare hardware
Oct 13 20:28:19 pedro-laptop kernel: [    0.180259] regulator: core version 0.5
Oct 13 20:28:19 pedro-laptop kernel: [    0.180259] Time: 20:28:04  Date: 10/13/09
Oct 13 20:28:19 pedro-laptop kernel: [    0.180259] NET: Registered protocol family 16
Oct 13 20:28:19 pedro-laptop kernel: [    0.180264] EISA bus registered
Oct 13 20:28:19 pedro-laptop kernel: [    0.180277] ACPI: bus type pci registered
Oct 13 20:28:19 pedro-laptop kernel: [    0.180366] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 12
Oct 13 20:28:19 pedro-laptop kernel: [    0.180370] PCI: MCFG area at e0000000 reserved in E820
Oct 13 20:28:19 pedro-laptop kernel: [    0.180372] PCI: Using MMCONFIG for extended config space
Oct 13 20:28:19 pedro-laptop kernel: [    0.180375] PCI: Using configuration type 1 for base access
Oct 13 20:28:19 pedro-laptop kernel: [    0.184312] bio: create slab <bio-0> at 0
Oct 13 20:28:19 pedro-laptop kernel: [    0.185338] ACPI: EC: Look up EC in DSDT
Oct 13 20:28:19 pedro-laptop kernel: [    0.191349] ACPI: BIOS _OSI(Linux) query ignored
Oct 13 20:28:19 pedro-laptop kernel: [    0.196622] ACPI: EC: non-query interrupt received, switching to interrupt mode
Oct 13 20:28:19 pedro-laptop kernel: [    0.204206] ACPI: Interpreter enabled
Oct 13 20:28:19 pedro-laptop kernel: [    0.204215] ACPI: (supports S0 S3 S4 S5)
Oct 13 20:28:19 pedro-laptop kernel: [    0.204241] ACPI: Using IOAPIC for interrupt routing
Oct 13 20:28:19 pedro-laptop kernel: [    0.216548] [Firmware Bug]: ACPI: ACPI brightness control misses _BQC function
Oct 13 20:28:19 pedro-laptop kernel: [    0.216663] ACPI: EC: GPE = 0x1d, I/O: command/status = 0x66, data = 0x62
Oct 13 20:28:19 pedro-laptop kernel: [    0.216663] ACPI: EC: driver started in interrupt mode
Oct 13 20:28:19 pedro-laptop kernel: [    0.220087] ACPI: Power Resource [CTHT] (off)
Oct 13 20:28:19 pedro-laptop kernel: [    0.220450] ACPI: No dock devices found.
Oct 13 20:28:19 pedro-laptop kernel: [    0.221678] ACPI: PCI Root Bridge [PCI0] (0000:00)
Oct 13 20:28:19 pedro-laptop kernel: [    0.221866] pci 0000:00:04.0: PME# supported from D0 D3hot D3cold
Oct 13 20:28:19 pedro-laptop kernel: [    0.221871] pci 0000:00:04.0: PME# disabled
Oct 13 20:28:19 pedro-laptop kernel: [    0.221942] pci 0000:00:06.0: PME# supported from D0 D3hot D3cold
Oct 13 20:28:19 pedro-laptop kernel: [    0.221947] pci 0000:00:06.0: PME# disabled
Oct 13 20:28:19 pedro-laptop kernel: [    0.222015] pci 0000:00:07.0: PME# supported from D0 D3hot D3cold
Oct 13 20:28:19 pedro-laptop kernel: [    0.222020] pci 0000:00:07.0: PME# disabled
Oct 13 20:28:19 pedro-laptop kernel: [    0.222098] pci 0000:00:12.0: reg 10 io port: [0x8438-0x843f]
Oct 13 20:28:19 pedro-laptop kernel: [    0.222109] pci 0000:00:12.0: reg 14 io port: [0x8444-0x8447]
Oct 13 20:28:19 pedro-laptop kernel: [    0.222119] pci 0000:00:12.0: reg 18 io port: [0x8430-0x8437]
Oct 13 20:28:19 pedro-laptop kernel: [    0.222130] pci 0000:00:12.0: reg 1c io port: [0x8440-0x8443]
Oct 13 20:28:19 pedro-laptop kernel: [    0.222140] pci 0000:00:12.0: reg 20 io port: [0x8400-0x840f]
Oct 13 20:28:19 pedro-laptop kernel: [    0.222151] pci 0000:00:12.0: reg 24 32bit mmio: [0xf0209000-0xf02093ff]
Oct 13 20:28:19 pedro-laptop kernel: [    0.222178] pci 0000:00:12.0: set SATA to AHCI mode
Oct 13 20:28:19 pedro-laptop kernel: [    0.222236] pci 0000:00:13.0: reg 10 32bit mmio: [0xf0004000-0xf0004fff]
Oct 13 20:28:19 pedro-laptop kernel: [    0.222321] pci 0000:00:13.1: reg 10 32bit mmio: [0xf0005000-0xf0005fff]
Oct 13 20:28:19 pedro-laptop kernel: [    0.222404] pci 0000:00:13.2: reg 10 32bit mmio: [0xf0006000-0xf0006fff]
Oct 13 20:28:19 pedro-laptop kernel: [    0.222488] pci 0000:00:13.3: reg 10 32bit mmio: [0xf0007000-0xf0007fff]
Oct 13 20:28:19 pedro-laptop kernel: [    0.222572] pci 0000:00:13.4: reg 10 32bit mmio: [0xf0008000-0xf0008fff]
Oct 13 20:28:19 pedro-laptop kernel: [    0.222685] pci 0000:00:13.5: reg 10 32bit mmio: [0xf0209400-0xf02094ff]
Oct 13 20:28:19 pedro-laptop kernel: [    0.222765] pci 0000:00:13.5: supports D1 D2
Oct 13 20:28:19 pedro-laptop kernel: [    0.222768] pci 0000:00:13.5: PME# supported from D0 D1 D2 D3hot
Oct 13 20:28:19 pedro-laptop kernel: [    0.222774] pci 0000:00:13.5: PME# disabled
Oct 13 20:28:19 pedro-laptop kernel: [    0.222824] pci 0000:00:14.0: reg 10 io port: [0x8410-0x841f]
Oct 13 20:28:19 pedro-laptop kernel: [    0.222909] pci 0000:00:14.1: reg 10 io port: [0x1f0-0x1f7]
Oct 13 20:28:19 pedro-laptop kernel: [    0.222920] pci 0000:00:14.1: reg 14 io port: [0x3f4-0x3f7]
Oct 13 20:28:19 pedro-laptop kernel: [    0.222930] pci 0000:00:14.1: reg 18 io port: [0x00-0x07]
Oct 13 20:28:19 pedro-laptop kernel: [    0.222940] pci 0000:00:14.1: reg 1c io port: [0x00-0x03]
Oct 13 20:28:19 pedro-laptop kernel: [    0.222950] pci 0000:00:14.1: reg 20 io port: [0x8420-0x842f]
Oct 13 20:28:19 pedro-laptop kernel: [    0.223031] pci 0000:00:14.2: reg 10 64bit mmio: [0xf0000000-0xf0003fff]
Oct 13 20:28:19 pedro-laptop kernel: [    0.223097] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
Oct 13 20:28:19 pedro-laptop kernel: [    0.223104] pci 0000:00:14.2: PME# disabled
Oct 13 20:28:19 pedro-laptop kernel: [    0.223311] pci 0000:01:05.0: reg 10 64bit mmio: [0xd0000000-0xdfffffff]
Oct 13 20:28:19 pedro-laptop kernel: [    0.223322] pci 0000:01:05.0: reg 18 64bit mmio: [0xcfef0000-0xcfefffff]
Oct 13 20:28:19 pedro-laptop kernel: [    0.223329] pci 0000:01:05.0: reg 20 io port: [0x9000-0x90ff]
Oct 13 20:28:19 pedro-laptop kernel: [    0.223358] pci 0000:01:05.0: supports D1 D2
Oct 13 20:28:19 pedro-laptop kernel: [    0.223398] pci 0000:00:01.0: bridge io port: [0x9000-0x9fff]
Oct 13 20:28:19 pedro-laptop kernel: [    0.223403] pci 0000:00:01.0: bridge 32bit mmio: [0xcfe00000-0xcfefffff]
Oct 13 20:28:19 pedro-laptop kernel: [    0.223410] pci 0000:00:01.0: bridge 64bit mmio pref: [0xd0000000-0xdfffffff]
Oct 13 20:28:19 pedro-laptop kernel: [    0.223480] pci 0000:02:00.0: reg 10 64bit mmio: [0xf0400000-0xf0403fff]
Oct 13 20:28:19 pedro-laptop kernel: [    0.223491] pci 0000:02:00.0: reg 18 io port: [0xa000-0xa0ff]
Oct 13 20:28:19 pedro-laptop kernel: [    0.223567] pci 0000:02:00.0: supports D1 D2
Oct 13 20:28:19 pedro-laptop kernel: [    0.223570] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
Oct 13 20:28:19 pedro-laptop kernel: [    0.223576] pci 0000:02:00.0: PME# disabled
Oct 13 20:28:19 pedro-laptop kernel: [    0.223656] pci 0000:00:04.0: bridge io port: [0xa000-0xafff]
Oct 13 20:28:19 pedro-laptop kernel: [    0.223661] pci 0000:00:04.0: bridge 32bit mmio: [0xf0400000-0xf04fffff]
Oct 13 20:28:19 pedro-laptop kernel: [    0.223740] pci 0000:00:06.0: bridge io port: [0x00-0xfff]
Oct 13 20:28:19 pedro-laptop kernel: [    0.223745] pci 0000:00:06.0: bridge 32bit mmio: [0x000000-0x0fffff]
Oct 13 20:28:19 pedro-laptop kernel: [    0.223811] pci 0000:08:00.0: reg 10 64bit mmio: [0xf0300000-0xf030ffff]
Oct 13 20:28:19 pedro-laptop kernel: [    0.223979] pci 0000:00:07.0: bridge 32bit mmio: [0xf0300000-0xf03fffff]
Oct 13 20:28:19 pedro-laptop kernel: [    0.224087] pci 0000:00:14.4: transparent bridge
Oct 13 20:28:19 pedro-laptop kernel: [    0.224126] pci_bus 0000:00: on NUMA node 0
Oct 13 20:28:19 pedro-laptop kernel: [    0.224131] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
Oct 13 20:28:19 pedro-laptop kernel: [    0.224292] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PB4_._PRT]
Oct 13 20:28:19 pedro-laptop kernel: [    0.224397] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PB6_._PRT]
Oct 13 20:28:19 pedro-laptop kernel: [    0.224490] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PB7_._PRT]
Oct 13 20:28:19 pedro-laptop kernel: [    0.224634] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P_._PRT]
Oct 13 20:28:19 pedro-laptop kernel: [    0.224678] ACPI Warning: \_SB_.PCI0.P2P_._PRT: Return Package has no elements (empty) 20090521 nspredef-434
Oct 13 20:28:19 pedro-laptop kernel: [    0.224698] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT]
Oct 13 20:28:19 pedro-laptop kernel: [    0.228978] ACPI: PCI Interrupt Link [LNKA] (IRQs 10 11) *0, disabled.
Oct 13 20:28:19 pedro-laptop kernel: [    0.229128] ACPI: PCI Interrupt Link [LNKB] (IRQs 10 11) *0, disabled.
Oct 13 20:28:19 pedro-laptop kernel: [    0.229274] ACPI: PCI Interrupt Link [LNKC] (IRQs 10 11) *0, disabled.
Oct 13 20:28:19 pedro-laptop kernel: [    0.229419] ACPI: PCI Interrupt Link [LNKD] (IRQs 10 11) *0, disabled.
Oct 13 20:28:19 pedro-laptop kernel: [    0.229565] ACPI: PCI Interrupt Link [LNKE] (IRQs 10 11) *0, disabled.
Oct 13 20:28:19 pedro-laptop kernel: [    0.229711] ACPI: PCI Interrupt Link [LNKF] (IRQs 10 11) *0, disabled.
Oct 13 20:28:19 pedro-laptop kernel: [    0.229856] ACPI: PCI Interrupt Link [LNKG] (IRQs 10 11) *0, disabled.
Oct 13 20:28:19 pedro-laptop kernel: [    0.230001] ACPI: PCI Interrupt Link [LNKH] (IRQs 10 11) *0, disabled.
Oct 13 20:28:19 pedro-laptop kernel: [    0.230233] SCSI subsystem initialized
Oct 13 20:28:19 pedro-laptop kernel: [    0.230275] libata version 3.00 loaded.
Oct 13 20:28:19 pedro-laptop kernel: [    0.230275] usbcore: registered new interface driver usbfs
Oct 13 20:28:19 pedro-laptop kernel: [    0.230275] usbcore: registered new interface driver hub
Oct 13 20:28:19 pedro-laptop kernel: [    0.230275] usbcore: registered new device driver usb
Oct 13 20:28:19 pedro-laptop kernel: [    0.230275] ACPI: WMI: Mapper loaded
Oct 13 20:28:19 pedro-laptop kernel: [    0.230275] PCI: Using ACPI for IRQ routing
Oct 13 20:28:19 pedro-laptop kernel: [    0.230275] pci 0000:00:06.0: BAR 13: can't allocate resource
Oct 13 20:28:19 pedro-laptop kernel: [    0.230275] pci 0000:00:06.0: BAR 14: can't allocate resource
Oct 13 20:28:19 pedro-laptop kernel: [    0.240010] Bluetooth: Core ver 2.15
Oct 13 20:28:19 pedro-laptop kernel: [    0.240030] NET: Registered protocol family 31
Oct 13 20:28:19 pedro-laptop kernel: [    0.240030] Bluetooth: HCI device and connection manager initialized
Oct 13 20:28:19 pedro-laptop kernel: [    0.240030] Bluetooth: HCI socket layer initialized
Oct 13 20:28:19 pedro-laptop kernel: [    0.240030] NetLabel: Initializing
Oct 13 20:28:19 pedro-laptop kernel: [    0.240030] NetLabel:  domain hash size = 128
Oct 13 20:28:19 pedro-laptop kernel: [    0.240031] NetLabel:  protocols = UNLABELED CIPSOv4
Oct 13 20:28:19 pedro-laptop kernel: [    0.240049] NetLabel:  unlabeled traffic allowed by default
Oct 13 20:28:19 pedro-laptop kernel: [    0.240089] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
Oct 13 20:28:19 pedro-laptop kernel: [    0.240097] hpet0: 4 comparators, 32-bit 14.318180 MHz counter
Oct 13 20:28:19 pedro-laptop kernel: [    0.260013] pnp: PnP ACPI init
Oct 13 20:28:19 pedro-laptop kernel: [    0.260043] ACPI: bus type pnp registered
Oct 13 20:28:19 pedro-laptop kernel: [    0.264103] pnp: PnP ACPI: found 11 devices
Oct 13 20:28:19 pedro-laptop kernel: [    0.264106] ACPI: ACPI bus type pnp unregistered
Oct 13 20:28:19 pedro-laptop kernel: [    0.264112] PnPBIOS: Disabled by ACPI PNP
Oct 13 20:28:19 pedro-laptop kernel: [    0.264127] system 00:01: iomem range 0xfec00000-0xfec00fff could not be reserved
Oct 13 20:28:19 pedro-laptop kernel: [    0.264132] system 00:01: iomem range 0xfee00000-0xfee00fff has been reserved
Oct 13 20:28:19 pedro-laptop kernel: [    0.264143] system 00:08: ioport range 0x1080-0x1080 has been reserved
Oct 13 20:28:19 pedro-laptop kernel: [    0.264147] system 00:08: ioport range 0x220-0x22f has been reserved
Oct 13 20:28:19 pedro-laptop kernel: [    0.264151] system 00:08: ioport range 0x40b-0x40b has been reserved
Oct 13 20:28:19 pedro-laptop kernel: [    0.264154] system 00:08: ioport range 0x4d0-0x4d1 has been reserved
Oct 13 20:28:19 pedro-laptop kernel: [    0.264158] system 00:08: ioport range 0x4d6-0x4d6 has been reserved
Oct 13 20:28:19 pedro-laptop kernel: [    0.264161] system 00:08: ioport range 0x530-0x537 has been reserved
Oct 13 20:28:19 pedro-laptop kernel: [    0.264165] system 00:08: ioport range 0xc00-0xc01 has been reserved
Oct 13 20:28:19 pedro-laptop kernel: [    0.264168] system 00:08: ioport range 0xc14-0xc14 has been reserved
Oct 13 20:28:19 pedro-laptop kernel: [    0.264172] system 00:08: ioport range 0xc50-0xc52 has been reserved
Oct 13 20:28:19 pedro-laptop kernel: [    0.264175] system 00:08: ioport range 0xc6c-0xc6c has been reserved
Oct 13 20:28:19 pedro-laptop kernel: [    0.264179] system 00:08: ioport range 0xc6f-0xc6f has been reserved
Oct 13 20:28:19 pedro-laptop kernel: [    0.264182] system 00:08: ioport range 0xcd0-0xcd1 has been reserved
Oct 13 20:28:19 pedro-laptop kernel: [    0.264186] system 00:08: ioport range 0xcd2-0xcd3 has been reserved
Oct 13 20:28:19 pedro-laptop kernel: [    0.264189] system 00:08: ioport range 0xcd4-0xcd5 has been reserved
Oct 13 20:28:19 pedro-laptop kernel: [    0.264193] system 00:08: ioport range 0xcd6-0xcd7 has been reserved
Oct 13 20:28:19 pedro-laptop kernel: [    0.264196] system 00:08: ioport range 0xcd8-0xcdf has been reserved
Oct 13 20:28:19 pedro-laptop kernel: [    0.264200] system 00:08: ioport range 0x8000-0x805f has been reserved
Oct 13 20:28:19 pedro-laptop kernel: [    0.264204] system 00:08: ioport range 0x8210-0x821f has been reserved
Oct 13 20:28:19 pedro-laptop kernel: [    0.264207] system 00:08: ioport range 0xf40-0xf47 has been reserved
Oct 13 20:28:19 pedro-laptop kernel: [    0.264211] system 00:08: ioport range 0x280-0x293 has been reserved
Oct 13 20:28:19 pedro-laptop kernel: [    0.264214] system 00:08: ioport range 0x87f-0x87f has been reserved
Oct 13 20:28:19 pedro-laptop kernel: [    0.264222] system 00:09: iomem range 0xe0000-0xfffff could not be reserved
Oct 13 20:28:19 pedro-laptop kernel: [    0.264226] system 00:09: iomem range 0xfff00000-0xffffffff has been reserved
Oct 13 20:28:19 pedro-laptop kernel: [    0.264230] system 00:09: iomem range 0xffb83020-0xffb8401f has been reserved
Oct 13 20:28:19 pedro-laptop kernel: [    0.298956] AppArmor: AppArmor Filesystem Enabled
Oct 13 20:28:19 pedro-laptop kernel: [    0.299013] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
Oct 13 20:28:19 pedro-laptop kernel: [    0.299017] pci 0000:00:01.0:   IO window: 0x9000-0x9fff
Oct 13 20:28:19 pedro-laptop kernel: [    0.299023] pci 0000:00:01.0:   MEM window: 0xcfe00000-0xcfefffff
Oct 13 20:28:19 pedro-laptop kernel: [    0.299028] pci 0000:00:01.0:   PREFETCH window: 0x000000d0000000-0x000000dfffffff
Oct 13 20:28:19 pedro-laptop kernel: [    0.299035] pci 0000:00:04.0: PCI bridge, secondary bus 0000:02
Oct 13 20:28:19 pedro-laptop kernel: [    0.299039] pci 0000:00:04.0:   IO window: 0xa000-0xafff
Oct 13 20:28:19 pedro-laptop kernel: [    0.299044] pci 0000:00:04.0:   MEM window: 0xf0400000-0xf04fffff
Oct 13 20:28:19 pedro-laptop kernel: [    0.299048] pci 0000:00:04.0:   PREFETCH window: disabled
Oct 13 20:28:19 pedro-laptop kernel: [    0.299053] pci 0000:00:06.0: PCI bridge, secondary bus 0000:05
Oct 13 20:28:19 pedro-laptop kernel: [    0.299056] pci 0000:00:06.0:   IO window: disabled
Oct 13 20:28:19 pedro-laptop kernel: [    0.299061] pci 0000:00:06.0:   MEM window: disabled
Oct 13 20:28:19 pedro-laptop kernel: [    0.299065] pci 0000:00:06.0:   PREFETCH window: disabled
Oct 13 20:28:19 pedro-laptop kernel: [    0.299070] pci 0000:00:07.0: PCI bridge, secondary bus 0000:08
Oct 13 20:28:19 pedro-laptop kernel: [    0.299072] pci 0000:00:07.0:   IO window: disabled
Oct 13 20:28:19 pedro-laptop kernel: [    0.299078] pci 0000:00:07.0:   MEM window: 0xf0300000-0xf03fffff
Oct 13 20:28:19 pedro-laptop kernel: [    0.299082] pci 0000:00:07.0:   PREFETCH window: disabled
Oct 13 20:28:19 pedro-laptop kernel: [    0.299087] pci 0000:00:14.4: PCI bridge, secondary bus 0000:0b
Oct 13 20:28:19 pedro-laptop kernel: [    0.299089] pci 0000:00:14.4:   IO window: disabled
Oct 13 20:28:19 pedro-laptop kernel: [    0.299097] pci 0000:00:14.4:   MEM window: disabled
Oct 13 20:28:19 pedro-laptop kernel: [    0.299102] pci 0000:00:14.4:   PREFETCH window: disabled
Oct 13 20:28:19 pedro-laptop kernel: [    0.299124] pci 0000:00:04.0: setting latency timer to 64
Oct 13 20:28:19 pedro-laptop kernel: [    0.299134] pci 0000:00:06.0: setting latency timer to 64
Oct 13 20:28:19 pedro-laptop kernel: [    0.299143] pci 0000:00:07.0: setting latency timer to 64
Oct 13 20:28:19 pedro-laptop kernel: [    0.299155] pci_bus 0000:00: resource 0 io:  [0x00-0xffff]
Oct 13 20:28:19 pedro-laptop kernel: [    0.299158] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
Oct 13 20:28:19 pedro-laptop kernel: [    0.299161] pci_bus 0000:01: resource 0 io:  [0x9000-0x9fff]
Oct 13 20:28:19 pedro-laptop kernel: [    0.299165] pci_bus 0000:01: resource 1 mem: [0xcfe00000-0xcfefffff]
Oct 13 20:28:19 pedro-laptop kernel: [    0.299168] pci_bus 0000:01: resource 2 pref mem [0xd0000000-0xdfffffff]
Oct 13 20:28:19 pedro-laptop kernel: [    0.299172] pci_bus 0000:02: resource 0 io:  [0xa000-0xafff]
Oct 13 20:28:19 pedro-laptop kernel: [    0.299175] pci_bus 0000:02: resource 1 mem: [0xf0400000-0xf04fffff]
Oct 13 20:28:19 pedro-laptop kernel: [    0.299178] pci_bus 0000:05: resource 0 mem: [0x0-0xfff]
Oct 13 20:28:19 pedro-laptop kernel: [    0.299181] pci_bus 0000:05: resource 1 mem: [0x0-0xfffff]
Oct 13 20:28:19 pedro-laptop kernel: [    0.299185] pci_bus 0000:08: resource 1 mem: [0xf0300000-0xf03fffff]
Oct 13 20:28:19 pedro-laptop kernel: [    0.299188] pci_bus 0000:0b: resource 3 io:  [0x00-0xffff]
Oct 13 20:28:19 pedro-laptop kernel: [    0.299191] pci_bus 0000:0b: resource 4 mem: [0x000000-0xffffffff]
Oct 13 20:28:19 pedro-laptop kernel: [    0.299241] NET: Registered protocol family 2
Oct 13 20:28:19 pedro-laptop kernel: [    0.299367] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
Oct 13 20:28:19 pedro-laptop kernel: [    0.299808] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
Oct 13 20:28:19 pedro-laptop kernel: [    0.300508] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
Oct 13 20:28:19 pedro-laptop kernel: [    0.301003] TCP: Hash tables configured (established 131072 bind 65536)
Oct 13 20:28:19 pedro-laptop kernel: [    0.301006] TCP reno registered
Oct 13 20:28:19 pedro-laptop kernel: [    0.301184] NET: Registered protocol family 1
Oct 13 20:28:19 pedro-laptop kernel: [    0.301276] Trying to unpack rootfs image as initramfs...
Oct 13 20:28:19 pedro-laptop kernel: [    0.501993] Switched to high resolution mode on CPU 1
Oct 13 20:28:19 pedro-laptop kernel: [    0.504016] Switched to high resolution mode on CPU 0
Oct 13 20:28:19 pedro-laptop kernel: [    0.539609] Freeing initrd memory: 7493k freed
Oct 13 20:28:19 pedro-laptop kernel: [    0.547608] cpufreq-nforce2: No nForce2 chipset.
Oct 13 20:28:19 pedro-laptop kernel: [    0.547655] Scanning for low memory corruption every 60 seconds
Oct 13 20:28:19 pedro-laptop kernel: [    0.547806] audit: initializing netlink socket (disabled)
Oct 13 20:28:19 pedro-laptop kernel: [    0.547833] type=2000 audit(1255465682.545:1): initialized
Oct 13 20:28:19 pedro-laptop kernel: [    0.558550] highmem bounce pool size: 64 pages
Oct 13 20:28:19 pedro-laptop kernel: [    0.558558] HugeTLB registered 4 MB page size, pre-allocated 0 pages
Oct 13 20:28:19 pedro-laptop kernel: [    0.560410] VFS: Disk quotas dquot_6.5.2
Oct 13 20:28:19 pedro-laptop kernel: [    0.560489] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
Oct 13 20:28:19 pedro-laptop kernel: [    0.561173] fuse init (API version 7.12)
Oct 13 20:28:19 pedro-laptop kernel: [    0.561277] msgmni has been set to 1699
Oct 13 20:28:19 pedro-laptop kernel: [    0.561535] alg: No test for stdrng (krng)
Oct 13 20:28:19 pedro-laptop kernel: [    0.561553] io scheduler noop registered
Oct 13 20:28:19 pedro-laptop kernel: [    0.561556] io scheduler anticipatory registered
Oct 13 20:28:19 pedro-laptop kernel: [    0.561559] io scheduler deadline registered
Oct 13 20:28:19 pedro-laptop kernel: [    0.561612] io scheduler cfq registered (default)
Oct 13 20:28:19 pedro-laptop kernel: [    0.561705] pci 0000:01:05.0: Boot video device
Oct 13 20:28:19 pedro-laptop kernel: [    0.561871]   alloc irq_desc for 24 on node -1
Oct 13 20:28:19 pedro-laptop kernel: [    0.561874]   alloc kstat_irqs on node -1
Oct 13 20:28:19 pedro-laptop kernel: [    0.561887] pcieport-driver 0000:00:04.0: irq 24 for MSI/MSI-X
Oct 13 20:28:19 pedro-laptop kernel: [    0.561896] pcieport-driver 0000:00:04.0: setting latency timer to 64
Oct 13 20:28:19 pedro-laptop kernel: [    0.562032]   alloc irq_desc for 25 on node -1
Oct 13 20:28:19 pedro-laptop kernel: [    0.562035]   alloc kstat_irqs on node -1
Oct 13 20:28:19 pedro-laptop kernel: [    0.562043] pcieport-driver 0000:00:06.0: irq 25 for MSI/MSI-X
Oct 13 20:28:19 pedro-laptop kernel: [    0.562052] pcieport-driver 0000:00:06.0: setting latency timer to 64
Oct 13 20:28:19 pedro-laptop kernel: [    0.562185]   alloc irq_desc for 26 on node -1
Oct 13 20:28:19 pedro-laptop kernel: [    0.562188]   alloc kstat_irqs on node -1
Oct 13 20:28:19 pedro-laptop kernel: [    0.562195] pcieport-driver 0000:00:07.0: irq 26 for MSI/MSI-X
Oct 13 20:28:19 pedro-laptop kernel: [    0.562204] pcieport-driver 0000:00:07.0: setting latency timer to 64
Oct 13 20:28:19 pedro-laptop kernel: [    0.562299] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
Oct 13 20:28:19 pedro-laptop kernel: [    0.562330] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
Oct 13 20:28:19 pedro-laptop kernel: [    0.563235] ACPI: AC Adapter [AC] (on-line)
Oct 13 20:28:19 pedro-laptop kernel: [    0.563330] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
Oct 13 20:28:19 pedro-laptop kernel: [    0.563335] ACPI: Power Button [PWRF]
Oct 13 20:28:19 pedro-laptop kernel: [    0.563404] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input1
Oct 13 20:28:19 pedro-laptop kernel: [    0.563407] ACPI: Sleep Button [SLPB]
Oct 13 20:28:19 pedro-laptop kernel: [    0.563464] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input2
Oct 13 20:28:19 pedro-laptop kernel: [    0.563513] ACPI: Lid Switch [LID0]
Oct 13 20:28:19 pedro-laptop kernel: [    0.563567] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input3
Oct 13 20:28:19 pedro-laptop kernel: [    0.563574] ACPI: Power Button [PWRB]
Oct 13 20:28:19 pedro-laptop kernel: [    0.564555] fan PNP0C0B:00: registered as cooling_device0
Oct 13 20:28:19 pedro-laptop kernel: [    0.564562] ACPI: Fan [FAN0] (off)
Oct 13 20:28:19 pedro-laptop kernel: [    0.565486] ACPI: SSDT 8fe8baf3 00261 (v01  PmRef  Cpu0Ist 00003000 INTL 20050228)
Oct 13 20:28:19 pedro-laptop kernel: [    0.566704] ACPI: SSDT 8fe8b556 00518 (v01  PmRef  Cpu0Cst 00003001 INTL 20050228)
Oct 13 20:28:19 pedro-laptop kernel: [    0.569403] Monitor-Mwait will be used to enter C-1 state
Oct 13 20:28:19 pedro-laptop kernel: [    0.569441] Monitor-Mwait will be used to enter C-2 state
Oct 13 20:28:19 pedro-laptop kernel: [    0.569453] Marking TSC unstable due to TSC halts in idle
Oct 13 20:28:19 pedro-laptop kernel: [    0.569472] ACPI: CPU0 (power states: C1[C1] C2[C2])
Oct 13 20:28:19 pedro-laptop kernel: [    0.569498] processor LNXCPU:00: registered as cooling_device1
Oct 13 20:28:19 pedro-laptop kernel: [    0.569503] ACPI: Processor [CPU0] (supports 8 throttling states)
Oct 13 20:28:19 pedro-laptop kernel: [    0.570159] ACPI: SSDT 8fe8bd54 001F2 (v01  PmRef  Cpu1Ist 00003000 INTL 20050228)
Oct 13 20:28:19 pedro-laptop kernel: [    0.570756] ACPI: SSDT 8fe8ba6e 00085 (v01  PmRef  Cpu1Cst 00003000 INTL 20050228)
Oct 13 20:28:19 pedro-laptop kernel: [    0.571713] ACPI: CPU1 (power states: C1[C1] C2[C2])
Oct 13 20:28:19 pedro-laptop kernel: [    0.571744] processor LNXCPU:01: registered as cooling_device2
Oct 13 20:28:19 pedro-laptop kernel: [    0.571749] ACPI: Processor [CPU1] (supports 8 throttling states)
Oct 13 20:28:19 pedro-laptop kernel: [    0.581890] thermal LNXTHERM:01: registered as thermal_zone0
Oct 13 20:28:19 pedro-laptop kernel: [    0.581902] ACPI: Thermal Zone [TZ1] (40 C)
Oct 13 20:28:19 pedro-laptop kernel: [    0.581979] isapnp: Scanning for PnP cards...
Oct 13 20:28:19 pedro-laptop kernel: [    0.638947] ACPI: Battery Slot [CMB0] (battery present)
Oct 13 20:28:19 pedro-laptop kernel: [    0.936151] isapnp: No Plug & Play device found
Oct 13 20:28:19 pedro-laptop kernel: [    0.937707] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
Oct 13 20:28:19 pedro-laptop kernel: [    0.939353] brd: module loaded
Oct 13 20:28:19 pedro-laptop kernel: [    0.939913] loop: module loaded
Oct 13 20:28:19 pedro-laptop kernel: [    0.940031] input: Macintosh mouse button emulation as /devices/virtual/input/input4
Oct 13 20:28:19 pedro-laptop kernel: [    0.940125] ahci 0000:00:12.0: version 3.0
Oct 13 20:28:19 pedro-laptop kernel: [    0.940146]   alloc irq_desc for 22 on node -1
Oct 13 20:28:19 pedro-laptop kernel: [    0.940148]   alloc kstat_irqs on node -1
Oct 13 20:28:19 pedro-laptop kernel: [    0.940157] ahci 0000:00:12.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
Oct 13 20:28:19 pedro-laptop kernel: [    0.940289] ahci 0000:00:12.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode
Oct 13 20:28:19 pedro-laptop kernel: [    0.940293] ahci 0000:00:12.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part 
Oct 13 20:28:19 pedro-laptop kernel: [    0.940769] scsi0 : ahci
Oct 13 20:28:19 pedro-laptop kernel: [    0.940910] scsi1 : ahci
Oct 13 20:28:19 pedro-laptop kernel: [    0.940988] scsi2 : ahci
Oct 13 20:28:19 pedro-laptop kernel: [    0.941059] scsi3 : ahci
Oct 13 20:28:19 pedro-laptop kernel: [    0.941196] ata1: SATA max UDMA/133 abar m1024@0xf0209000 port 0xf0209100 irq 22
Oct 13 20:28:19 pedro-laptop kernel: [    0.941201] ata2: SATA max UDMA/133 abar m1024@0xf0209000 port 0xf0209180 irq 22
Oct 13 20:28:19 pedro-laptop kernel: [    0.941205] ata3: SATA max UDMA/133 abar m1024@0xf0209000 port 0xf0209200 irq 22
Oct 13 20:28:19 pedro-laptop kernel: [    0.941209] ata4: SATA max UDMA/133 abar m1024@0xf0209000 port 0xf0209280 irq 22
Oct 13 20:28:19 pedro-laptop kernel: [    0.941570]   alloc irq_desc for 16 on node -1
Oct 13 20:28:19 pedro-laptop kernel: [    0.941573]   alloc kstat_irqs on node -1
Oct 13 20:28:19 pedro-laptop kernel: [    0.941581] pata_atiixp 0000:00:14.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
Oct 13 20:28:19 pedro-laptop kernel: [    0.941629] pata_atiixp 0000:00:14.1: setting latency timer to 64
Oct 13 20:28:19 pedro-laptop kernel: [    0.941722] scsi4 : pata_atiixp
Oct 13 20:28:19 pedro-laptop kernel: [    0.941800] scsi5 : pata_atiixp
Oct 13 20:28:19 pedro-laptop kernel: [    0.942743] ata5: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x8420 irq 14
Oct 13 20:28:19 pedro-laptop kernel: [    0.942747] ata6: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x8428 irq 15
Oct 13 20:28:19 pedro-laptop kernel: [    0.943612] Fixed MDIO Bus: probed
Oct 13 20:28:19 pedro-laptop kernel: [    0.943655] PPP generic driver version 2.4.2
Oct 13 20:28:19 pedro-laptop kernel: [    0.943803] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
Oct 13 20:28:19 pedro-laptop kernel: [    0.943830]   alloc irq_desc for 19 on node -1
Oct 13 20:28:19 pedro-laptop kernel: [    0.943833]   alloc kstat_irqs on node -1
Oct 13 20:28:19 pedro-laptop kernel: [    0.943844] ehci_hcd 0000:00:13.5: PCI INT D -> GSI 19 (level, low) -> IRQ 19
Oct 13 20:28:19 pedro-laptop kernel: [    0.943869] ehci_hcd 0000:00:13.5: EHCI Host Controller
Oct 13 20:28:19 pedro-laptop kernel: [    0.943941] ehci_hcd 0000:00:13.5: new USB bus registered, assigned bus number 1
Oct 13 20:28:19 pedro-laptop kernel: [    0.943973] ehci_hcd 0000:00:13.5: applying AMD SB600/SB700 USB freeze workaround
Oct 13 20:28:19 pedro-laptop kernel: [    0.944025] ehci_hcd 0000:00:13.5: debug port 1
Oct 13 20:28:19 pedro-laptop kernel: [    0.944046] ehci_hcd 0000:00:13.5: irq 19, io mem 0xf0209400
Oct 13 20:28:19 pedro-laptop kernel: [    0.956019] ehci_hcd 0000:00:13.5: USB 2.0 started, EHCI 1.00
Oct 13 20:28:19 pedro-laptop kernel: [    0.956131] usb usb1: configuration #1 chosen from 1 choice
Oct 13 20:28:19 pedro-laptop kernel: [    0.956172] hub 1-0:1.0: USB hub found
Oct 13 20:28:19 pedro-laptop kernel: [    0.956183] hub 1-0:1.0: 10 ports detected
Oct 13 20:28:19 pedro-laptop kernel: [    0.956280] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
Oct 13 20:28:19 pedro-laptop kernel: [    0.956302] ohci_hcd 0000:00:13.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
Oct 13 20:28:19 pedro-laptop kernel: [    0.956317] ohci_hcd 0000:00:13.0: OHCI Host Controller
Oct 13 20:28:19 pedro-laptop kernel: [    0.956367] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 2
Oct 13 20:28:19 pedro-laptop kernel: [    0.956395] ohci_hcd 0000:00:13.0: irq 16, io mem 0xf0004000
Oct 13 20:28:19 pedro-laptop kernel: [    1.012121] usb usb2: configuration #1 chosen from 1 choice
Oct 13 20:28:19 pedro-laptop kernel: [    1.012158] hub 2-0:1.0: USB hub found
Oct 13 20:28:19 pedro-laptop kernel: [    1.012171] hub 2-0:1.0: 2 ports detected
Oct 13 20:28:19 pedro-laptop kernel: [    1.012233]   alloc irq_desc for 17 on node -1
Oct 13 20:28:19 pedro-laptop kernel: [    1.012235]   alloc kstat_irqs on node -1
Oct 13 20:28:19 pedro-laptop kernel: [    1.012243] ohci_hcd 0000:00:13.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
Oct 13 20:28:19 pedro-laptop kernel: [    1.012255] ohci_hcd 0000:00:13.1: OHCI Host Controller
Oct 13 20:28:19 pedro-laptop kernel: [    1.012295] ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 3
Oct 13 20:28:19 pedro-laptop kernel: [    1.012323] ohci_hcd 0000:00:13.1: irq 17, io mem 0xf0005000
Oct 13 20:28:19 pedro-laptop kernel: [    1.068114] usb usb3: configuration #1 chosen from 1 choice
Oct 13 20:28:19 pedro-laptop kernel: [    1.068147] hub 3-0:1.0: USB hub found
Oct 13 20:28:19 pedro-laptop kernel: [    1.068159] hub 3-0:1.0: 2 ports detected
Oct 13 20:28:19 pedro-laptop kernel: [    1.068216]   alloc irq_desc for 18 on node -1
Oct 13 20:28:19 pedro-laptop kernel: [    1.068219]   alloc kstat_irqs on node -1
Oct 13 20:28:19 pedro-laptop kernel: [    1.068225] ohci_hcd 0000:00:13.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
Oct 13 20:28:19 pedro-laptop kernel: [    1.068237] ohci_hcd 0000:00:13.2: OHCI Host Controller
Oct 13 20:28:19 pedro-laptop kernel: [    1.068275] ohci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 4
Oct 13 20:28:19 pedro-laptop kernel: [    1.068301] ohci_hcd 0000:00:13.2: irq 18, io mem 0xf0006000
Oct 13 20:28:19 pedro-laptop kernel: [    1.108522] ata5.00: ATAPI: HL-DT-ST DVDRAM GSA-T20N, WH01, max UDMA/33
Oct 13 20:28:19 pedro-laptop kernel: [    1.124119] usb usb4: configuration #1 chosen from 1 choice
Oct 13 20:28:19 pedro-laptop kernel: [    1.124152] hub 4-0:1.0: USB hub found
Oct 13 20:28:19 pedro-laptop kernel: [    1.124163] hub 4-0:1.0: 2 ports detected
Oct 13 20:28:19 pedro-laptop kernel: [    1.124223] ohci_hcd 0000:00:13.3: PCI INT B -> GSI 17 (level, low) -> IRQ 17
Oct 13 20:28:19 pedro-laptop kernel: [    1.124236] ohci_hcd 0000:00:13.3: OHCI Host Controller
Oct 13 20:28:19 pedro-laptop kernel: [    1.124275] ohci_hcd 0000:00:13.3: new USB bus registered, assigned bus number 5
Oct 13 20:28:19 pedro-laptop kernel: [    1.124293] ohci_hcd 0000:00:13.3: irq 17, io mem 0xf0007000
Oct 13 20:28:19 pedro-laptop kernel: [    1.124772] ata5.00: configured for UDMA/33
Oct 13 20:28:19 pedro-laptop kernel: [    1.180120] usb usb5: configuration #1 chosen from 1 choice
Oct 13 20:28:19 pedro-laptop kernel: [    1.180153] hub 5-0:1.0: USB hub found
Oct 13 20:28:19 pedro-laptop kernel: [    1.180165] hub 5-0:1.0: 2 ports detected
Oct 13 20:28:19 pedro-laptop kernel: [    1.180234] ohci_hcd 0000:00:13.4: PCI INT C -> GSI 18 (level, low) -> IRQ 18
Oct 13 20:28:19 pedro-laptop kernel: [    1.180247] ohci_hcd 0000:00:13.4: OHCI Host Controller
Oct 13 20:28:19 pedro-laptop kernel: [    1.180286] ohci_hcd 0000:00:13.4: new USB bus registered, assigned bus number 6
Oct 13 20:28:19 pedro-laptop kernel: [    1.180304] ohci_hcd 0000:00:13.4: irq 18, io mem 0xf0008000
Oct 13 20:28:19 pedro-laptop kernel: [    1.236133] usb usb6: configuration #1 chosen from 1 choice
Oct 13 20:28:19 pedro-laptop kernel: [    1.236166] hub 6-0:1.0: USB hub found
Oct 13 20:28:19 pedro-laptop kernel: [    1.236178] hub 6-0:1.0: 2 ports detected
Oct 13 20:28:19 pedro-laptop kernel: [    1.236243] uhci_hcd: USB Universal Host Controller Interface driver
Oct 13 20:28:19 pedro-laptop kernel: [    1.236357] PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSE0] at 0x60,0x64 irq 1,12
Oct 13 20:28:19 pedro-laptop kernel: [    1.240837] i8042.c: Detected active multiplexing controller, rev 1.1.
Oct 13 20:28:19 pedro-laptop kernel: [    1.243752] serio: i8042 KBD port at 0x60,0x64 irq 1
Oct 13 20:28:19 pedro-laptop kernel: [    1.243760] serio: i8042 AUX0 port at 0x60,0x64 irq 12
Oct 13 20:28:19 pedro-laptop kernel: [    1.243763] serio: i8042 AUX1 port at 0x60,0x64 irq 12
Oct 13 20:28:19 pedro-laptop kernel: [    1.243767] serio: i8042 AUX2 port at 0x60,0x64 irq 12
Oct 13 20:28:19 pedro-laptop kernel: [    1.243770] serio: i8042 AUX3 port at 0x60,0x64 irq 12
Oct 13 20:28:19 pedro-laptop kernel: [    1.243848] mice: PS/2 mouse device common for all mice
Oct 13 20:28:19 pedro-laptop kernel: [    1.244030] rtc_cmos 00:04: RTC can wake from S4
Oct 13 20:28:19 pedro-laptop kernel: [    1.244077] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
Oct 13 20:28:19 pedro-laptop kernel: [    1.244108] rtc0: alarms up to one month, 114 bytes nvram, hpet irqs
Oct 13 20:28:19 pedro-laptop kernel: [    1.244247] device-mapper: uevent: version 1.0.3
Oct 13 20:28:19 pedro-laptop kernel: [    1.244370] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com
Oct 13 20:28:19 pedro-laptop kernel: [    1.244487] device-mapper: multipath: version 1.1.0 loaded
Oct 13 20:28:19 pedro-laptop kernel: [    1.244490] device-mapper: multipath round-robin: version 1.0.0 loaded
Oct 13 20:28:19 pedro-laptop kernel: [    1.244642] EISA: Probing bus 0 at eisa.0
Oct 13 20:28:19 pedro-laptop kernel: [    1.244650] Cannot allocate resource for EISA slot 1
Oct 13 20:28:19 pedro-laptop kernel: [    1.244681] Cannot allocate resource for EISA slot 8
Oct 13 20:28:19 pedro-laptop kernel: [    1.244683] EISA: Detected 0 cards.
Oct 13 20:28:19 pedro-laptop kernel: [    1.244880] cpuidle: using governor ladder
Oct 13 20:28:19 pedro-laptop kernel: [    1.244996] cpuidle: using governor menu
Oct 13 20:28:19 pedro-laptop kernel: [    1.245637] TCP cubic registered
Oct 13 20:28:19 pedro-laptop kernel: [    1.245828] NET: Registered protocol family 10
Oct 13 20:28:19 pedro-laptop kernel: [    1.246406] lo: Disabled Privacy Extensions
Oct 13 20:28:19 pedro-laptop kernel: [    1.246840] NET: Registered protocol family 17
Oct 13 20:28:19 pedro-laptop kernel: [    1.246864] Bluetooth: L2CAP ver 2.13
Oct 13 20:28:19 pedro-laptop kernel: [    1.246867] Bluetooth: L2CAP socket layer initialized
Oct 13 20:28:19 pedro-laptop kernel: [    1.246870] Bluetooth: SCO (Voice Link) ver 0.6
Oct 13 20:28:19 pedro-laptop kernel: [    1.246873] Bluetooth: SCO socket layer initialized
Oct 13 20:28:19 pedro-laptop kernel: [    1.246923] Bluetooth: RFCOMM TTY layer initialized
Oct 13 20:28:19 pedro-laptop kernel: [    1.246927] Bluetooth: RFCOMM socket layer initialized
Oct 13 20:28:19 pedro-laptop kernel: [    1.246929] Bluetooth: RFCOMM ver 1.11
Oct 13 20:28:19 pedro-laptop kernel: [    1.247475] Using IPI No-Shortcut mode
Oct 13 20:28:19 pedro-laptop kernel: [    1.247561] PM: Resume from disk failed.
Oct 13 20:28:19 pedro-laptop kernel: [    1.247578] registered taskstats version 1
Oct 13 20:28:19 pedro-laptop kernel: [    1.247714]   Magic number: 13:50:498
Oct 13 20:28:19 pedro-laptop kernel: [    1.247826] rtc_cmos 00:04: setting system clock to 2009-10-13 20:28:05 UTC (1255465685)
Oct 13 20:28:19 pedro-laptop kernel: [    1.247830] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
Oct 13 20:28:19 pedro-laptop kernel: [    1.247832] EDD information not available.
Oct 13 20:28:19 pedro-laptop kernel: [    1.254227] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input5
Oct 13 20:28:19 pedro-laptop kernel: [    1.261067] ata2: SATA link down (SStatus 0 SControl 300)
Oct 13 20:28:19 pedro-laptop kernel: [    1.261099] ata3: SATA link down (SStatus 0 SControl 300)
Oct 13 20:28:19 pedro-laptop kernel: [    1.265051] ata4: SATA link down (SStatus 0 SControl 300)
Oct 13 20:28:19 pedro-laptop kernel: [    1.269033] usb 1-9: new high speed USB device using ehci_hcd and address 2
Oct 13 20:28:19 pedro-laptop kernel: [    1.424024] ata1: softreset failed (device not ready)
Oct 13 20:28:19 pedro-laptop kernel: [    1.424028] ata1: applying SB600 PMP SRST workaround and retrying
Oct 13 20:28:19 pedro-laptop kernel: [    1.505217] usb 1-9: configuration #1 chosen from 1 choice
Oct 13 20:28:19 pedro-laptop kernel: [    1.588051] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
Oct 13 20:28:19 pedro-laptop kernel: [    1.588567] ata1.00: ATA-8: FUJITSU MHW2120BH, 00000012, max UDMA/100
Oct 13 20:28:19 pedro-laptop kernel: [    1.588571] ata1.00: 234441648 sectors, multi 16: LBA48 NCQ (depth 31/32)
Oct 13 20:28:19 pedro-laptop kernel: [    1.588600] ata1.00: SB600 AHCI: limiting to 255 sectors per cmd
Oct 13 20:28:19 pedro-laptop kernel: [    1.589263] ata1.00: SB600 AHCI: limiting to 255 sectors per cmd
Oct 13 20:28:19 pedro-laptop kernel: [    1.589266] ata1.00: configured for UDMA/100
Oct 13 20:28:19 pedro-laptop kernel: [    1.604186] scsi 0:0:0:0: Direct-Access     ATA      FUJITSU MHW2120B 0000 PQ: 0 ANSI: 5
Oct 13 20:28:19 pedro-laptop kernel: [    1.604346] sd 0:0:0:0: Attached scsi generic sg0 type 0
Oct 13 20:28:19 pedro-laptop kernel: [    1.604397] sd 0:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/111 GiB)
Oct 13 20:28:19 pedro-laptop kernel: [    1.604453] sd 0:0:0:0: [sda] Write Protect is off
Oct 13 20:28:19 pedro-laptop kernel: [    1.604456] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
Oct 13 20:28:19 pedro-laptop kernel: [    1.604484] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Oct 13 20:28:19 pedro-laptop kernel: [    1.604647]  sda:
Oct 13 20:28:19 pedro-laptop kernel: [    1.608257] scsi 4:0:0:0: CD-ROM            HL-DT-ST DVDRAM GSA-T20N  WH01 PQ: 0 ANSI: 5
Oct 13 20:28:19 pedro-laptop kernel: [    1.619183] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
Oct 13 20:28:19 pedro-laptop kernel: [    1.619188] Uniform CD-ROM driver Revision: 3.20
Oct 13 20:28:19 pedro-laptop kernel: [    1.619296] sr 4:0:0:0: Attached scsi CD-ROM sr0
Oct 13 20:28:19 pedro-laptop kernel: [    1.619347] sr 4:0:0:0: Attached scsi generic sg1 type 5
Oct 13 20:28:19 pedro-laptop kernel: [    1.641253]  sda1 sda2 sda3 sda4 < sda5 sda6 sda7 >
Oct 13 20:28:19 pedro-laptop kernel: [    1.679009] sd 0:0:0:0: [sda] Attached SCSI disk
Oct 13 20:28:19 pedro-laptop kernel: [    1.772144] Freeing unused kernel memory: 540k freed
Oct 13 20:28:19 pedro-laptop kernel: [    1.772616] Write protecting the kernel text: 4552k
Oct 13 20:28:19 pedro-laptop kernel: [    1.772678] Write protecting the kernel read-only data: 1832k
Oct 13 20:28:19 pedro-laptop kernel: [    1.931070] [Firmware Bug]: ACPI: ACPI brightness control misses _BQC function
Oct 13 20:28:19 pedro-laptop kernel: [    1.954362] acpi device:21: registered as cooling_device3
Oct 13 20:28:19 pedro-laptop kernel: [    1.955420] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:1e/device:1f/input/input6
Oct 13 20:28:19 pedro-laptop kernel: [    1.955474] ACPI: Video Device [VGA] (multi-head: yes  rom: yes  post: no)
Oct 13 20:28:19 pedro-laptop kernel: [    1.961138] Linux agpgart interface v0.103
Oct 13 20:28:19 pedro-laptop kernel: [    2.053624] [drm] Initialized drm 1.1.0 20060810
Oct 13 20:28:19 pedro-laptop kernel: [    2.062402] sky2 driver version 1.23
Oct 13 20:28:19 pedro-laptop kernel: [    2.062463] sky2 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
Oct 13 20:28:19 pedro-laptop kernel: [    2.062483] sky2 0000:02:00.0: setting latency timer to 64
Oct 13 20:28:19 pedro-laptop kernel: [    2.062518] sky2 0000:02:00.0: Yukon-2 FE chip revision 3
Oct 13 20:28:19 pedro-laptop kernel: [    2.062625]   alloc irq_desc for 27 on node -1
Oct 13 20:28:19 pedro-laptop kernel: [    2.062628]   alloc kstat_irqs on node -1
Oct 13 20:28:19 pedro-laptop kernel: [    2.062649] sky2 0000:02:00.0: irq 27 for MSI/MSI-X
Oct 13 20:28:19 pedro-laptop kernel: [    2.063604] sky2 eth0: addr 00:e0:91:15:a0:3f
Oct 13 20:28:19 pedro-laptop kernel: [    2.077340] [drm] radeon default to kernel modesetting DISABLED.
Oct 13 20:28:19 pedro-laptop kernel: [    2.078203] pci 0000:01:05.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
Oct 13 20:28:19 pedro-laptop kernel: [    2.078400] [drm] Initialized radeon 1.31.0 20080528 for 0000:01:05.0 on minor 0
Oct 13 20:28:19 pedro-laptop kernel: [    3.323531] PM: Starting manual resume from disk
Oct 13 20:28:19 pedro-laptop kernel: [    3.323537] PM: Resume from partition 8:7
Oct 13 20:28:19 pedro-laptop kernel: [    3.323539] PM: Checking hibernation image.
Oct 13 20:28:19 pedro-laptop kernel: [    3.323745] PM: Resume from disk failed.
Oct 13 20:28:19 pedro-laptop kernel: [    3.355351] kjournald starting.  Commit interval 5 seconds
Oct 13 20:28:19 pedro-laptop kernel: [    3.355372] EXT3-fs: mounted filesystem with writeback data mode.
Oct 13 20:28:19 pedro-laptop kernel: [    4.511139] type=1505 audit(1255465688.760:2): operation="profile_load" pid=412 name=/usr/share/gdm/guest-session/Xsession
Oct 13 20:28:19 pedro-laptop kernel: [    4.526867] type=1505 audit(1255465688.776:3): operation="profile_load" pid=413 name=/sbin/dhclient3
Oct 13 20:28:19 pedro-laptop kernel: [    4.527788] type=1505 audit(1255465688.776:4): operation="profile_load" pid=413 name=/usr/lib/NetworkManager/nm-dhcp-client.action
Oct 13 20:28:19 pedro-laptop kernel: [    4.528317] type=1505 audit(1255465688.780:5): operation="profile_load" pid=413 name=/usr/lib/connman/scripts/dhclient-script
Oct 13 20:28:19 pedro-laptop kernel: [    4.576650] type=1505 audit(1255465688.828:6): operation="profile_load" pid=414 name=/usr/bin/evince
Oct 13 20:28:19 pedro-laptop kernel: [    4.589277] type=1505 audit(1255465688.840:7): operation="profile_load" pid=414 name=/usr/bin/evince-previewer
Oct 13 20:28:19 pedro-laptop kernel: [    4.596853] type=1505 audit(1255465688.848:8): operation="profile_load" pid=414 name=/usr/bin/evince-thumbnailer
Oct 13 20:28:19 pedro-laptop kernel: [    4.652719] type=1505 audit(1255465688.904:9): operation="profile_load" pid=416 name=/usr/lib/cups/backend/cups-pdf
Oct 13 20:28:19 pedro-laptop kernel: [    5.880994] Adding 1502004k swap on /dev/sda7.  Priority:-1 extents:1 across:1502004k 
Oct 13 20:28:19 pedro-laptop kernel: [    6.711154] EXT3 FS on sda5, internal journal
Oct 13 20:28:19 pedro-laptop kernel: [    7.999356] udev: starting version 147
Oct 13 20:28:19 pedro-laptop kernel: [    9.785963] kjournald starting.  Commit interval 5 seconds
Oct 13 20:28:19 pedro-laptop kernel: [    9.825870] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
Oct 13 20:28:19 pedro-laptop kernel: [    9.942436] EXT3 FS on sda6, internal journal
Oct 13 20:28:19 pedro-laptop kernel: [    9.942446] EXT3-fs: mounted filesystem with writeback data mode.
Oct 13 20:28:19 pedro-laptop kernel: [   10.169687] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0x8410, revision 0
Oct 13 20:28:19 pedro-laptop kernel: [   10.228100] cfg80211: Calling CRDA to update world regulatory domain
Oct 13 20:28:19 pedro-laptop kernel: [   10.300268] lp: driver loaded but no devices found
Oct 13 20:28:19 pedro-laptop kernel: [   10.348660] ip_tables: (C) 2000-2006 Netfilter Core Team
Oct 13 20:28:19 pedro-laptop kernel: [   10.399644] Linux video capture interface: v2.00
Oct 13 20:28:19 pedro-laptop kernel: [   10.960315] uvcvideo: Found UVC 1.00 device FO13FF-65 PC-CAM (05c8:0103)
Oct 13 20:28:19 pedro-laptop kernel: [   10.967052] input: FO13FF-65 PC-CAM as /devices/pci0000:00/0000:00:13.5/usb1/1-9/1-9:1.0/input/input7
Oct 13 20:28:19 pedro-laptop kernel: [   10.967117] usbcore: registered new interface driver uvcvideo
Oct 13 20:28:19 pedro-laptop kernel: [   10.967122] USB Video Class driver (v0.1.0)
Oct 13 20:28:19 pedro-laptop kernel: [   10.974461] Synaptics Touchpad, model: 1, fw: 6.2, id: 0x25a0b1, caps: 0xa04713/0x200000
Oct 13 20:28:19 pedro-laptop kernel: [   11.020557] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio2/input/input8
Oct 13 20:28:19 pedro-laptop kernel: [   12.966072] ath5k 0000:08:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
Oct 13 20:28:19 pedro-laptop kernel: [   12.966085] ath5k 0000:08:00.0: setting latency timer to 64
Oct 13 20:28:19 pedro-laptop kernel: [   12.966132] ath5k 0000:08:00.0: registered as 'phy0'
Oct 13 20:28:19 pedro-laptop kernel: [   13.055908] ath: EEPROM regdomain: 0x60
Oct 13 20:28:19 pedro-laptop kernel: [   13.055912] ath: EEPROM indicates we should expect a direct regpair map
Oct 13 20:28:19 pedro-laptop kernel: [   13.055917] ath: Country alpha2 being used: 00
Oct 13 20:28:19 pedro-laptop kernel: [   13.055919] ath: Regpair used: 0x60
Oct 13 20:28:19 pedro-laptop kernel: [   13.474913] cfg80211: World regulatory domain updated:
Oct 13 20:28:19 pedro-laptop kernel: [   13.474919] 	(start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
Oct 13 20:28:19 pedro-laptop kernel: [   13.474923] 	(2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Oct 13 20:28:19 pedro-laptop kernel: [   13.474926] 	(2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
Oct 13 20:28:19 pedro-laptop kernel: [   13.474930] 	(2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
Oct 13 20:28:19 pedro-laptop kernel: [   13.474933] 	(5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Oct 13 20:28:19 pedro-laptop kernel: [   13.474936] 	(5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Oct 13 20:28:19 pedro-laptop kernel: [   13.674394] phy0: Selected rate control algorithm 'minstrel'
Oct 13 20:28:19 pedro-laptop kernel: [   13.675348] Registered led device: ath5k-phy0::rx
Oct 13 20:28:19 pedro-laptop kernel: [   13.675372] Registered led device: ath5k-phy0::tx
Oct 13 20:28:19 pedro-laptop kernel: [   13.675376] ath5k phy0: Atheros AR2425 chip found (MAC: 0xe2, PHY: 0x70)
Oct 13 20:28:19 pedro-laptop kernel: [   13.863730] HDA Intel 0000:00:14.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16
Oct 13 20:28:19 pedro-laptop kernel: [   13.994106] hda_codec: Unknown model for ALC262, trying auto-probe from BIOS...
Oct 13 20:28:19 pedro-laptop kernel: [   13.994251] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:14.2/input/input9
Oct 13 20:28:19 pedro-laptop kernel: [   14.716942] __ratelimit: 9 callbacks suppressed
Oct 13 20:28:19 pedro-laptop kernel: [   14.716947] type=1505 audit(1255476498.968:13): operation="profile_replace" pid=863 name=/usr/share/gdm/guest-session/Xsession
Oct 13 20:28:19 pedro-laptop kernel: [   14.719504] type=1505 audit(1255476498.968:14): operation="profile_replace" pid=864 name=/sbin/dhclient3
Oct 13 20:28:19 pedro-laptop kernel: [   14.720564] type=1505 audit(1255476498.972:15): operation="profile_replace" pid=864 name=/usr/lib/NetworkManager/nm-dhcp-client.action
Oct 13 20:28:19 pedro-laptop kernel: [   14.721071] type=1505 audit(1255476498.972:16): operation="profile_replace" pid=864 name=/usr/lib/connman/scripts/dhclient-script
Oct 13 20:28:19 pedro-laptop kernel: [   14.726349] type=1505 audit(1255476498.976:17): operation="profile_replace" pid=865 name=/usr/bin/evince
Oct 13 20:28:19 pedro-laptop kernel: [   14.739232] type=1505 audit(1255476498.988:18): operation="profile_replace" pid=865 name=/usr/bin/evince-previewer
Oct 13 20:28:25 pedro-laptop NetworkManager: <info>  starting...
Oct 13 20:28:25 pedro-laptop NetworkManager: <info>  Trying to start the modem-manager...
Oct 13 20:28:25 pedro-laptop modem-manager: Loaded plugin Ericsson MBM
Oct 13 20:28:26 pedro-laptop modem-manager: Loaded plugin Huawei
Oct 13 20:28:26 pedro-laptop NetworkManager:    SCPlugin-Ifupdown: init!
Oct 13 20:28:26 pedro-laptop NetworkManager:    SCPlugin-Ifupdown: update_system_hostname
Oct 13 20:28:26 pedro-laptop NetworkManager:    SCPluginIfupdown: management mode: unmanaged
Oct 13 20:28:26 pedro-laptop NetworkManager:    SCPlugin-Ifupdown: devices added (path: /sys/devices/pci0000:00/0000:00:04.0/0000:02:00.0/net/eth0, iface: eth0)
Oct 13 20:28:26 pedro-laptop NetworkManager:    SCPlugin-Ifupdown: device added (path: /sys/devices/pci0000:00/0000:00:04.0/0000:02:00.0/net/eth0, iface: eth0): no ifupdown configuration found.
Oct 13 20:28:26 pedro-laptop NetworkManager:    SCPlugin-Ifupdown: devices added (path: /sys/devices/pci0000:00/0000:00:07.0/0000:08:00.0/net/wlan0, iface: wlan0)
Oct 13 20:28:26 pedro-laptop NetworkManager:    SCPlugin-Ifupdown: device added (path: /sys/devices/pci0000:00/0000:00:07.0/0000:08:00.0/net/wlan0, iface: wlan0): no ifupdown configuration found.
Oct 13 20:28:26 pedro-laptop NetworkManager:    SCPlugin-Ifupdown: devices added (path: /sys/devices/pci0000:00/0000:00:07.0/0000:08:00.0/net/wmaster0, iface: wmaster0)
Oct 13 20:28:26 pedro-laptop NetworkManager:    SCPlugin-Ifupdown: device added (path: /sys/devices/pci0000:00/0000:00:07.0/0000:08:00.0/net/wmaster0, iface: wmaster0): no ifupdown configuration found.
Oct 13 20:28:26 pedro-laptop NetworkManager:    SCPlugin-Ifupdown: devices added (path: /sys/devices/virtual/net/lo, iface: lo)
Oct 13 20:28:26 pedro-laptop NetworkManager:    SCPlugin-Ifupdown: device added (path: /sys/devices/virtual/net/lo, iface: lo): no ifupdown configuration found.
Oct 13 20:28:26 pedro-laptop NetworkManager:    SCPlugin-Ifupdown: end _init.
Oct 13 20:28:26 pedro-laptop NetworkManager: Loaded plugin ifupdown: (C) 2008 Canonical Ltd.  To report bugs please use the NetworkManager mailing list.
Oct 13 20:28:26 pedro-laptop modem-manager: Loaded plugin Nokia
Oct 13 20:28:26 pedro-laptop modem-manager: Loaded plugin MotoC
Oct 13 20:28:26 pedro-laptop NetworkManager: Loaded plugin keyfile: (c) 2007 - 2008 Red Hat, Inc.  To report bugs please use the NetworkManager mailing list.
Oct 13 20:28:26 pedro-laptop NetworkManager: <info>  Found radio killswitch rfkill0 (at /sys/devices/pci0000:00/0000:00:07.0/0000:08:00.0/ieee80211/phy0/rfkill0) (driver <unknown>)
Oct 13 20:28:26 pedro-laptop modem-manager: Loaded plugin Generic
Oct 13 20:28:26 pedro-laptop NetworkManager: <info>  Wireless now enabled by radio killswitch
Oct 13 20:28:26 pedro-laptop NetworkManager:    SCPlugin-Ifupdown: (158464752) ... get_connections.
Oct 13 20:28:26 pedro-laptop NetworkManager:    SCPlugin-Ifupdown: (158464752) ... get_connections (managed=false): return empty list.
Oct 13 20:28:26 pedro-laptop modem-manager: Loaded plugin Option High-Speed
Oct 13 20:28:26 pedro-laptop modem-manager: Loaded plugin ZTE
Oct 13 20:28:26 pedro-laptop modem-manager: Loaded plugin Gobi
Oct 13 20:28:26 pedro-laptop modem-manager: Loaded plugin Sierra
Oct 13 20:28:26 pedro-laptop modem-manager: Loaded plugin Novatel
Oct 13 20:28:26 pedro-laptop modem-manager: Loaded plugin Option
Oct 13 20:28:28 pedro-laptop NetworkManager:    Ifupdown: get unmanaged devices count: 0
Oct 13 20:28:28 pedro-laptop NetworkManager: <info>  (eth0): carrier is OFF
Oct 13 20:28:28 pedro-laptop NetworkManager: <info>  (eth0): new Ethernet device (driver: 'sky2')
Oct 13 20:28:28 pedro-laptop NetworkManager: <info>  (eth0): exported as /org/freedesktop/NetworkManager/Devices/0
Oct 13 20:28:28 pedro-laptop NetworkManager: <info>  (eth0): now managed
Oct 13 20:28:28 pedro-laptop NetworkManager: <info>  (eth0): device state change: 1 -> 2 (reason 2)
Oct 13 20:28:28 pedro-laptop NetworkManager: <info>  (eth0): bringing up device.
Oct 13 20:28:28 pedro-laptop NetworkManager: <info>  (eth0): preparing device.
Oct 13 20:28:28 pedro-laptop NetworkManager: <info>  (eth0): deactivating device (reason: 2).
Oct 13 20:28:28 pedro-laptop NetworkManager: Added default wired connection 'Auto eth0' for /sys/devices/pci0000:00/0000:00:04.0/0000:02:00.0/net/eth0
Oct 13 20:28:28 pedro-laptop NetworkManager: <info>  (wlan0): driver supports SSID scans (scan_capa 0x01).
Oct 13 20:28:28 pedro-laptop NetworkManager: <info>  (wlan0): new 802.11 WiFi device (driver: 'ath5k')
Oct 13 20:28:28 pedro-laptop NetworkManager: <info>  (wlan0): exported as /org/freedesktop/NetworkManager/Devices/1
Oct 13 20:28:28 pedro-laptop NetworkManager: <info>  (wlan0): now managed
Oct 13 20:28:28 pedro-laptop NetworkManager: <info>  (wlan0): device state change: 1 -> 2 (reason 2)
Oct 13 20:28:28 pedro-laptop NetworkManager: <info>  (wlan0): bringing up device.
Oct 13 20:28:28 pedro-laptop NetworkManager: <info>  (wlan0): preparing device.
Oct 13 20:28:28 pedro-laptop NetworkManager: <info>  (wlan0): deactivating device (reason: 2).
Oct 13 20:28:28 pedro-laptop NetworkManager: supplicant_interface_acquire: assertion `mgr_state == NM_SUPPLICANT_MANAGER_STATE_IDLE' failed
Oct 13 20:28:28 pedro-laptop NetworkManager: <info>  modem-manager is now available
Oct 13 20:28:28 pedro-laptop NetworkManager: <WARN>  default_adapter_cb(): bluez error getting default adapter: The name org.bluez was not provided by any .service files
Oct 13 20:28:28 pedro-laptop kernel: [   14.746769] type=1505 audit(1255476498.996:19): operation="profile_replace" pid=865 name=/usr/bin/evince-thumbnailer
Oct 13 20:28:28 pedro-laptop kernel: [   14.758051] type=1505 audit(1255476499.008:20): operation="profile_replace" pid=867 name=/usr/lib/cups/backend/cups-pdf
Oct 13 20:28:28 pedro-laptop kernel: [   14.759124] type=1505 audit(1255476499.008:21): operation="profile_replace" pid=867 name=/usr/sbin/cupsd
Oct 13 20:28:28 pedro-laptop kernel: [   14.864696] type=1505 audit(1255476499.113:22): operation="profile_replace" pid=868 name=/usr/sbin/ntpd
Oct 13 20:28:28 pedro-laptop kernel: [   24.023889] sky2 eth0: enabling interface
Oct 13 20:28:28 pedro-laptop kernel: [   24.024262] ADDRCONF(NETDEV_UP): eth0: link is not ready
Oct 13 20:28:28 pedro-laptop NetworkManager: <info>  Trying to start the supplicant...
Oct 13 20:28:30 pedro-laptop NetworkManager: <info>  (wlan0): supplicant manager state:  down -> idle
Oct 13 20:28:30 pedro-laptop NetworkManager: <info>  (wlan0): device state change: 2 -> 3 (reason 0)
Oct 13 20:28:31 pedro-laptop NetworkManager: <info>  (wlan0): supplicant interface state:  starting -> ready
Oct 13 20:29:32 pedro-laptop NetworkManager: <info>  Activation (wlan0) starting connection 'Auto Pedro'
Oct 13 20:29:32 pedro-laptop NetworkManager: <info>  (wlan0): device state change: 3 -> 4 (reason 0)
Oct 13 20:29:32 pedro-laptop NetworkManager: <info>  Activation (wlan0) Stage 1 of 5 (Device Prepare) scheduled...
Oct 13 20:29:32 pedro-laptop NetworkManager: <info>  Activation (wlan0) Stage 1 of 5 (Device Prepare) started...
Oct 13 20:29:32 pedro-laptop NetworkManager: <info>  Activation (wlan0) Stage 2 of 5 (Device Configure) scheduled...
Oct 13 20:29:32 pedro-laptop NetworkManager: <info>  Activation (wlan0) Stage 1 of 5 (Device Prepare) complete.
Oct 13 20:29:32 pedro-laptop NetworkManager: <info>  Activation (wlan0) Stage 2 of 5 (Device Configure) starting...
Oct 13 20:29:32 pedro-laptop NetworkManager: <info>  (wlan0): device state change: 4 -> 5 (reason 0)
Oct 13 20:29:32 pedro-laptop NetworkManager: <info>  Activation (wlan0/wireless): access point 'Auto Pedro' has security, but secrets are required.
Oct 13 20:29:32 pedro-laptop NetworkManager: <info>  (wlan0): device state change: 5 -> 6 (reason 0)
Oct 13 20:29:32 pedro-laptop NetworkManager: <info>  Activation (wlan0) Stage 2 of 5 (Device Configure) complete.
Oct 13 20:29:33 pedro-laptop NetworkManager: <info>  Activation (wlan0) Stage 1 of 5 (Device Prepare) scheduled...
Oct 13 20:29:33 pedro-laptop NetworkManager: <info>  Activation (wlan0) Stage 1 of 5 (Device Prepare) started...
Oct 13 20:29:33 pedro-laptop NetworkManager: <info>  (wlan0): device state change: 6 -> 4 (reason 0)
Oct 13 20:29:33 pedro-laptop NetworkManager: <info>  Activation (wlan0) Stage 2 of 5 (Device Configure) scheduled...
Oct 13 20:29:33 pedro-laptop NetworkManager: <info>  Activation (wlan0) Stage 1 of 5 (Device Prepare) complete.
Oct 13 20:29:33 pedro-laptop NetworkManager: <info>  Activation (wlan0) Stage 2 of 5 (Device Configure) starting...
Oct 13 20:29:33 pedro-laptop NetworkManager: <info>  (wlan0): device state change: 4 -> 5 (reason 0)
Oct 13 20:29:33 pedro-laptop NetworkManager: <info>  Activation (wlan0/wireless): connection 'Auto Pedro' has security, and secrets exist.  No new secrets needed.
Oct 13 20:29:33 pedro-laptop NetworkManager: <info>  Config: added 'ssid' value 'Pedro'
Oct 13 20:29:33 pedro-laptop NetworkManager: <info>  Config: added 'scan_ssid' value '1'
Oct 13 20:29:33 pedro-laptop NetworkManager: <info>  Config: added 'key_mgmt' value 'WPA-PSK'
Oct 13 20:29:33 pedro-laptop NetworkManager: <info>  Config: added 'psk' value '<omitted>'
Oct 13 20:29:33 pedro-laptop NetworkManager: nm_setting_802_1x_get_pkcs11_engine_path: assertion `NM_IS_SETTING_802_1X (setting)' failed
Oct 13 20:29:33 pedro-laptop NetworkManager: nm_setting_802_1x_get_pkcs11_module_path: assertion `NM_IS_SETTING_802_1X (setting)' failed
Oct 13 20:29:33 pedro-laptop NetworkManager: <info>  Activation (wlan0) Stage 2 of 5 (Device Configure) complete.
Oct 13 20:29:33 pedro-laptop NetworkManager: <info>  Config: set interface ap_scan to 1
Oct 13 20:29:33 pedro-laptop NetworkManager: <info>  (wlan0): supplicant connection state:  inactive -> scanning
Oct 13 20:29:34 pedro-laptop NetworkManager: <info>  (wlan0): supplicant connection state:  scanning -> associating
Oct 13 20:29:34 pedro-laptop kernel: [   24.292357] ADDRCONF(NETDEV_UP): wlan0: link is not ready
Oct 13 20:29:34 pedro-laptop kernel: [   29.704738] ppdev: user-space parallel port driver
Oct 13 20:29:34 pedro-laptop kernel: [   30.045250] [drm] Setting GART location based on new memory map
Oct 13 20:29:34 pedro-laptop kernel: [   30.046600] [drm] Loading RS600 Microcode
Oct 13 20:29:34 pedro-laptop kernel: [   30.046630] [drm] Num pipes: 1
Oct 13 20:29:34 pedro-laptop NetworkManager: <info>  (wlan0): supplicant connection state:  associating -> associated
Oct 13 20:29:34 pedro-laptop kernel: [   30.046638] [drm] writeback test succeeded in 1 usecs
Oct 13 20:29:34 pedro-laptop kernel: [   90.567059] wlan0: authenticate with AP 00:21:91:6b:a4:3c
Oct 13 20:29:34 pedro-laptop kernel: [   90.568643] wlan0: authenticated
Oct 13 20:29:34 pedro-laptop kernel: [   90.568649] wlan0: associate with AP 00:21:91:6b:a4:3c
Oct 13 20:29:34 pedro-laptop NetworkManager: <info>  (wlan0): supplicant connection state:  associated -> 4-way handshake
Oct 13 20:29:35 pedro-laptop NetworkManager: <info>  (wlan0): supplicant connection state:  4-way handshake -> group handshake
Oct 13 20:29:35 pedro-laptop NetworkManager: <info>  (wlan0): supplicant connection state:  group handshake -> completed
Oct 13 20:29:35 pedro-laptop NetworkManager: <info>  Activation (wlan0/wireless) Stage 2 of 5 (Device Configure) successful.  Connected to wireless network 'Pedro'.
Oct 13 20:29:35 pedro-laptop NetworkManager: <info>  Activation (wlan0) Stage 3 of 5 (IP Configure Start) scheduled.
Oct 13 20:29:35 pedro-laptop NetworkManager: <info>  Activation (wlan0) Stage 3 of 5 (IP Configure Start) started...
Oct 13 20:29:35 pedro-laptop NetworkManager: <info>  (wlan0): device state change: 5 -> 7 (reason 0)
Oct 13 20:29:35 pedro-laptop NetworkManager: <info>  Activation (wlan0) Beginning DHCP transaction (timeout in 45 seconds)
Oct 13 20:29:35 pedro-laptop NetworkManager: <info>  dhclient started with pid 1960
Oct 13 20:29:35 pedro-laptop NetworkManager: <info>  Activation (wlan0) Stage 4 of 5 (IP6 Configure Get) scheduled...
Oct 13 20:29:35 pedro-laptop NetworkManager: <info>  Activation (wlan0) Stage 3 of 5 (IP Configure Start) complete.
Oct 13 20:29:36 pedro-laptop dhclient: Internet Systems Consortium DHCP Client V3.1.2
Oct 13 20:29:36 pedro-laptop dhclient: Copyright 2004-2008 Internet Systems Consortium.
Oct 13 20:29:36 pedro-laptop dhclient: All rights reserved.
Oct 13 20:29:36 pedro-laptop dhclient: For info, please visit http://www.isc.org/sw/dhcp/
Oct 13 20:29:36 pedro-laptop dhclient: 
Oct 13 20:29:36 pedro-laptop NetworkManager: <info>  Activation (wlan0) Stage 4 of 5 (IP6 Configure Get) started...
Oct 13 20:29:36 pedro-laptop NetworkManager: <info>  Activation (wlan0) Stage 4 of 5 (IP6 Configure Get) complete.
Oct 13 20:29:36 pedro-laptop NetworkManager: <info>  DHCP: device wlan0 state changed (null) -> preinit
Oct 13 20:29:36 pedro-laptop dhclient: Listening on LPF/wlan0/00:15:af:52:f9:6c
Oct 13 20:29:36 pedro-laptop dhclient: Sending on   LPF/wlan0/00:15:af:52:f9:6c
Oct 13 20:29:36 pedro-laptop dhclient: Sending on   Socket/fallback
Oct 13 20:29:37 pedro-laptop dhclient: DHCPREQUEST of 192.168.0.142 on wlan0 to 255.255.255.255 port 67
Oct 13 20:29:37 pedro-laptop dhclient: DHCPACK of 192.168.0.142 from 192.168.0.1
Oct 13 20:29:37 pedro-laptop dhclient: bound to 192.168.0.142 -- renewal in 551689 seconds.
Oct 13 20:29:37 pedro-laptop NetworkManager: <info>  DHCP: device wlan0 state changed preinit -> reboot
Oct 13 20:29:37 pedro-laptop NetworkManager: <info>  Activation (wlan0) Stage 4 of 5 (IP4 Configure Get) scheduled...
Oct 13 20:29:37 pedro-laptop NetworkManager: <info>  Activation (wlan0) Stage 4 of 5 (IP4 Configure Get) started...
Oct 13 20:29:37 pedro-laptop NetworkManager: <info>    address 192.168.0.142
Oct 13 20:29:37 pedro-laptop NetworkManager: <info>    prefix 24 (255.255.255.0)
Oct 13 20:29:37 pedro-laptop NetworkManager: <info>    gateway 192.168.0.1
Oct 13 20:29:37 pedro-laptop NetworkManager: <info>    nameserver '201.10.120.3'
Oct 13 20:29:37 pedro-laptop NetworkManager: <info>    nameserver '192.168.0.1'
Oct 13 20:29:37 pedro-laptop NetworkManager: <info>  Activation (wlan0) Stage 5 of 5 (IP Configure Commit) scheduled...
Oct 13 20:29:37 pedro-laptop NetworkManager: <info>  Activation (wlan0) Stage 4 of 5 (IP4 Configure Get) complete.
Oct 13 20:29:37 pedro-laptop NetworkManager: <info>  Activation (wlan0) Stage 5 of 5 (IP Configure Commit) started...
Oct 13 20:29:38 pedro-laptop NetworkManager: <info>  (wlan0): device state change: 7 -> 8 (reason 0)
Oct 13 20:29:38 pedro-laptop NetworkManager: <info>  Policy set 'Auto Pedro' (wlan0) as default for routing and DNS.
Oct 13 20:29:38 pedro-laptop NetworkManager: <info>  Activation (wlan0) successful, device activated.
Oct 13 20:29:38 pedro-laptop NetworkManager: <info>  Activation (wlan0) Stage 5 of 5 (IP Configure Commit) complete.
Oct 13 21:58:41 pedro-laptop kernel: [   90.571064] wlan0: RX AssocResp from 00:21:91:6b:a4:3c (capab=0x431 status=0 aid=2)
Oct 13 21:58:41 pedro-laptop kernel: [   90.571068] wlan0: associated
Oct 13 21:58:41 pedro-laptop kernel: [   90.572080] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
Oct 13 21:58:41 pedro-laptop kernel: [   91.260926] padlock: VIA PadLock not detected.
Oct 13 21:58:41 pedro-laptop kernel: [  100.828025] wlan0: no IPv6 routers present
Oct 13 21:58:41 pedro-laptop kernel: [  878.570544] cfg80211: Found new beacon on frequency: 2484 MHz (Ch 14) on phy0
Oct 13 21:58:41 pedro-laptop kernel: [ 3723.840013] CE: hpet increasing min_delta_ns to 15000 nsec
Oct 13 21:58:41 pedro-laptop kernel: [ 4957.676120] ath5k phy0: noise floor calibration timeout (2427MHz)
Oct 14 00:46:46 pedro-laptop kernel: [ 5437.303449] ath5k phy0: noise floor calibration failed (2422MHz)
Oct 14 00:46:46 pedro-laptop kernel: [ 7829.061077] uvcvideo: Failed to query (135) UVC control 2 (unit 3) : -110 (exp. 2).
Oct 14 00:46:46 pedro-laptop kernel: [ 7829.361128] uvcvideo: Failed to query (135) UVC control 2 (unit 3) : -110 (exp. 2).
Oct 14 00:46:46 pedro-laptop kernel: [ 7829.688186] uvcvideo: Failed to query (135) UVC control 2 (unit 3) : -110 (exp. 2).
Oct 14 00:46:46 pedro-laptop kernel: [ 7829.989465] uvcvideo: Failed to query (135) UVC control 2 (unit 3) : -110 (exp. 2).
Oct 14 00:46:46 pedro-laptop kernel: [15522.826389] __ratelimit: 3 callbacks suppressed
Oct 14 00:46:52 pedro-laptop kernel: [15522.826397] type=1503 audit(1255492006.756:24): operation="open" pid=5861 parent=5860 profile="/usr/bin/evince-thumbnailer" requested_mask="::r" denied_mask="::r" fsuid=1000 ouid=0 name="/etc/texmf/dvips/"
Oct 14 00:46:52 pedro-laptop kernel: [15522.874992] type=1503 audit(1255492006.804:25): operation="open" pid=5861 parent=5860 profile="/usr/bin/evince-thumbnailer" requested_mask="::r" denied_mask="::r" fsuid=1000 ouid=0 name="/etc/texmf/"
Oct 14 00:46:58 pedro-laptop kernel: [15528.859144] type=1503 audit(1255492012.788:26): operation="open" pid=6114 parent=5860 profile="/usr/bin/evince-thumbnailer" requested_mask="::r" denied_mask="::r" fsuid=1000 ouid=0 name="/etc/texmf/dvips/"
Oct 14 00:46:58 pedro-laptop kernel: [15528.859528] type=1503 audit(1255492012.788:27): operation="open" pid=6114 parent=5860 profile="/usr/bin/evince-thumbnailer" requested_mask="::r" denied_mask="::r" fsuid=1000 ouid=0 name="/etc/texmf/"
Oct 14 00:46:58 pedro-laptop kernel: [15534.342425] type=1503 audit(1255492018.272:28): operation="open" pid=6450 parent=5860 profile="/usr/bin/evince-thumbnailer" requested_mask="::r" denied_mask="::r" fsuid=1000 ouid=0 name="/etc/texmf/dvips/"
Oct 14 00:53:14 pedro-laptop NetworkManager: <info>  Sleeping...
Oct 14 00:53:14 pedro-laptop NetworkManager: <info>  (eth0): now unmanaged
Oct 14 00:53:14 pedro-laptop NetworkManager: <info>  (eth0): device state change: 2 -> 1 (reason 37)
Oct 14 00:53:14 pedro-laptop NetworkManager: <info>  (eth0): cleaning up...
Oct 14 00:53:14 pedro-laptop NetworkManager: <info>  (eth0): taking down device.
Oct 14 00:53:14 pedro-laptop NetworkManager: <info>  (wlan0): now unmanaged
Oct 14 00:53:14 pedro-laptop NetworkManager: <info>  (wlan0): device state change: 8 -> 1 (reason 37)
Oct 14 00:53:14 pedro-laptop NetworkManager: <info>  (wlan0): deactivating device (reason: 37).
Oct 14 00:53:14 pedro-laptop NetworkManager: <info>  (wlan0): canceled DHCP transaction, dhcp client pid 1960
Oct 14 00:53:14 pedro-laptop NetworkManager: <WARN>  check_one_route(): (wlan0) error -34 returned from rtnl_route_del(): Sucess#012
Oct 14 00:53:14 pedro-laptop NetworkManager: <info>  (wlan0): cleaning up...
Oct 14 00:53:14 pedro-laptop NetworkManager: <info>  (wlan0): taking down device.
Oct 14 07:55:56 pedro-laptop kernel: [15534.343143] type=1503 audit(1255492018.272:29): operation="open" pid=6450 parent=5860 profile="/usr/bin/evince-thumbnailer" requested_mask="::r" denied_mask="::r" fsuid=1000 ouid=0 name="/etc/texmf/"
Oct 14 07:55:56 pedro-laptop kernel: [15910.617019] sky2 eth0: disabling interface
Oct 14 07:55:56 pedro-laptop kernel: [15910.822104] wlan0: disassociating by local choice (reason=3)
Oct 14 07:55:56 pedro-laptop kernel: [15910.885054] wlan0: deauthenticating by local choice (reason=3)
Oct 14 07:55:56 pedro-laptop kernel: [15911.440319] [drm] Num pipes: 1
Oct 14 07:55:56 pedro-laptop kernel: [15912.163739] PM: Syncing filesystems ... done.
Oct 14 07:55:56 pedro-laptop kernel: [15912.782831] PM: Preparing system for mem sleep
Oct 14 07:55:56 pedro-laptop kernel: [15912.782837] Freezing user space processes ... (elapsed 0.00 seconds) done.
Oct 14 07:55:56 pedro-laptop kernel: [15912.784273] Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done.
Oct 14 07:55:56 pedro-laptop kernel: [15912.784357] PM: Entering mem sleep
Oct 14 07:55:56 pedro-laptop kernel: [15912.784374] Suspending console(s) (use no_console_suspend to debug)
Oct 14 07:55:56 pedro-laptop kernel: [15912.805046] sd 0:0:0:0: [sda] Synchronizing SCSI cache
Oct 14 07:55:56 pedro-laptop kernel: [15912.829747] sd 0:0:0:0: [sda] Stopping disk
Oct 14 07:55:56 pedro-laptop kernel: [15914.299542] ACPI handle has no context!
Oct 14 07:55:56 pedro-laptop kernel: [15914.299637] ath5k 0000:08:00.0: PCI INT A disabled
Oct 14 07:55:56 pedro-laptop kernel: [15914.312115] sky2 0000:02:00.0: PME# disabled
Oct 14 07:55:56 pedro-laptop kernel: [15914.328031] pci 0000:01:05.0: PCI INT A disabled
Oct 14 07:55:56 pedro-laptop kernel: [15914.328061] HDA Intel 0000:00:14.2: PCI INT A disabled
Oct 14 07:55:56 pedro-laptop kernel: [15914.344198] pata_atiixp 0000:00:14.1: PCI INT A disabled
Oct 14 07:55:56 pedro-laptop kernel: [15914.344209] ehci_hcd 0000:00:13.5: PCI INT D disabled
Oct 14 07:55:56 pedro-laptop kernel: [15914.344219] ohci_hcd 0000:00:13.4: PCI INT C disabled
Oct 14 07:55:56 pedro-laptop kernel: [15914.344228] ohci_hcd 0000:00:13.3: PCI INT B disabled
Oct 14 07:55:56 pedro-laptop kernel: [15914.344237] ohci_hcd 0000:00:13.2: PCI INT C disabled
Oct 14 07:55:56 pedro-laptop kernel: [15914.344246] ohci_hcd 0000:00:13.1: PCI INT B disabled
Oct 14 07:55:56 pedro-laptop kernel: [15914.344255] ohci_hcd 0000:00:13.0: PCI INT A disabled
Oct 14 07:55:56 pedro-laptop kernel: [15914.408248] ahci 0000:00:12.0: PCI INT A disabled
Oct 14 07:55:56 pedro-laptop kernel: [15914.410261] PM: suspend devices took 1.624 seconds
Oct 14 07:55:56 pedro-laptop kernel: [15914.410472] ehci_hcd 0000:00:13.5: PME# disabled
Oct 14 07:55:56 pedro-laptop kernel: [15914.512072] ACPI: Preparing to enter system sleep state S3
Oct 14 07:55:56 pedro-laptop kernel: [15914.512804] Disabling non-boot CPUs ...
Oct 14 07:55:56 pedro-laptop kernel: [15914.616023] CPU 1 is now offline
Oct 14 07:55:56 pedro-laptop kernel: [15914.616027] SMP alternatives: switching to UP code
Oct 14 07:55:56 pedro-laptop kernel: [15914.623401] CPU0 attaching NULL sched-domain.
Oct 14 07:55:56 pedro-laptop kernel: [15914.623404] CPU1 attaching NULL sched-domain.
Oct 14 07:55:56 pedro-laptop kernel: [15914.623412] CPU0 attaching NULL sched-domain.
Oct 14 07:55:56 pedro-laptop kernel: [15914.623657] CPU1 is down
Oct 14 07:55:56 pedro-laptop kernel: [15914.623667] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
Oct 14 07:55:56 pedro-laptop kernel: [15914.623667] Back to C!
Oct 14 07:55:56 pedro-laptop kernel: [15914.623667] Enabling non-boot CPUs ...
Oct 14 07:55:56 pedro-laptop kernel: [15914.624163] SMP alternatives: switching to SMP code
Oct 14 07:55:56 pedro-laptop kernel: [15914.631031] Booting processor 1 APIC 0x1 ip 0x6000
Oct 14 07:55:56 pedro-laptop kernel: [15914.623233] Initializing CPU#1
Oct 14 07:55:56 pedro-laptop kernel: [15914.623233] Calibrating delay using timer specific routine.. 3192.17 BogoMIPS (lpj=6384342)
Oct 14 07:55:56 pedro-laptop kernel: [15914.623233] CPU: L1 I cache: 32K, L1 D cache: 32K
Oct 14 07:55:56 pedro-laptop kernel: [15914.623233] CPU: L2 cache: 1024K
Oct 14 07:55:56 pedro-laptop kernel: [15914.623233] CPU: Physical Processor ID: 0
Oct 14 07:55:56 pedro-laptop kernel: [15914.623233] CPU: Processor Core ID: 1
Oct 14 07:55:56 pedro-laptop kernel: [15914.623233] x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106
Oct 14 07:55:56 pedro-laptop kernel: [15914.721922] CPU1: Intel(R) Pentium(R) Dual  CPU  T2330  @ 1.60GHz stepping 0d
Oct 14 07:55:56 pedro-laptop kernel: [15914.722008] CPU0 attaching NULL sched-domain.
Oct 14 07:55:56 pedro-laptop kernel: [15914.725017] Switched to high resolution mode on CPU 1
Oct 14 07:55:56 pedro-laptop kernel: [15914.736031] CPU0 attaching sched-domain:
Oct 14 07:55:56 pedro-laptop kernel: [15914.736035]  domain 0: span 0-1 level MC
Oct 14 07:55:56 pedro-laptop kernel: [15914.736037]   groups: 0 1
Oct 14 07:55:56 pedro-laptop kernel: [15914.736043] CPU1 attaching sched-domain:
Oct 14 07:55:56 pedro-laptop kernel: [15914.736045]  domain 0: span 0-1 level MC
Oct 14 07:55:56 pedro-laptop kernel: [15914.736048]   groups: 1 0
Oct 14 07:55:56 pedro-laptop kernel: [15914.737021] CPU1 is up
Oct 14 07:55:56 pedro-laptop kernel: [15914.737025] ACPI: Waking up from system sleep state S3
Oct 14 07:55:56 pedro-laptop kernel: [15915.180197] pcieport-driver 0000:00:04.0: restoring config space at offset 0xf (was 0xff, writing 0x400ff)
Oct 14 07:55:56 pedro-laptop kernel: [15915.180208] pcieport-driver 0000:00:04.0: restoring config space at offset 0x9 (was 0x10001, writing 0x1fff1)
Oct 14 07:55:56 pedro-laptop kernel: [15915.180214] pcieport-driver 0000:00:04.0: restoring config space at offset 0x8 (was 0x0, writing 0xf040f040)
Oct 14 07:55:56 pedro-laptop kernel: [15915.180219] pcieport-driver 0000:00:04.0: restoring config space at offset 0x7 (was 0x101, writing 0xa1a1)
Oct 14 07:55:56 pedro-laptop kernel: [15915.180224] pcieport-driver 0000:00:04.0: restoring config space at offset 0x6 (was 0x0, writing 0x40200)
Oct 14 07:55:56 pedro-laptop kernel: [15915.180231] pcieport-driver 0000:00:04.0: restoring config space at offset 0x3 (was 0x10000, writing 0x10008)
Oct 14 07:55:56 pedro-laptop kernel: [15915.180237] pcieport-driver 0000:00:04.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100407)
Oct 14 07:55:56 pedro-laptop kernel: [15915.180278] pcieport-driver 0000:00:06.0: restoring config space at offset 0xf (was 0xff, writing 0x400ff)
Oct 14 07:55:56 pedro-laptop kernel: [15915.180288] pcieport-driver 0000:00:06.0: restoring config space at offset 0x9 (was 0x10001, writing 0x1fff1)
Oct 14 07:55:56 pedro-laptop kernel: [15915.180293] pcieport-driver 0000:00:06.0: restoring config space at offset 0x8 (was 0x0, writing 0xfff0)
Oct 14 07:55:56 pedro-laptop kernel: [15915.180298] pcieport-driver 0000:00:06.0: restoring config space at offset 0x7 (was 0x101, writing 0x1f1)
Oct 14 07:55:56 pedro-laptop kernel: [15915.180303] pcieport-driver 0000:00:06.0: restoring config space at offset 0x6 (was 0x0, writing 0x70500)
Oct 14 07:55:56 pedro-laptop kernel: [15915.180310] pcieport-driver 0000:00:06.0: restoring config space at offset 0x3 (was 0x10000, writing 0x10008)
Oct 14 07:55:56 pedro-laptop kernel: [15915.180316] pcieport-driver 0000:00:06.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100404)
Oct 14 07:55:56 pedro-laptop kernel: [15915.180355] pcieport-driver 0000:00:07.0: restoring config space at offset 0xf (was 0xff, writing 0x400ff)
Oct 14 07:55:56 pedro-laptop kernel: [15915.180366] pcieport-driver 0000:00:07.0: restoring config space at offset 0x9 (was 0x10001, writing 0x1fff1)
Oct 14 07:55:56 pedro-laptop kernel: [15915.180371] pcieport-driver 0000:00:07.0: restoring config space at offset 0x8 (was 0x0, writing 0xf030f030)
Oct 14 07:55:56 pedro-laptop kernel: [15915.180376] pcieport-driver 0000:00:07.0: restoring config space at offset 0x7 (was 0x101, writing 0x200001f1)
Oct 14 07:55:56 pedro-laptop kernel: [15915.180381] pcieport-driver 0000:00:07.0: restoring config space at offset 0x6 (was 0x0, writing 0xa0800)
Oct 14 07:55:56 pedro-laptop kernel: [15915.180388] pcieport-driver 0000:00:07.0: restoring config space at offset 0x3 (was 0x10000, writing 0x10008)
Oct 14 07:55:56 pedro-laptop kernel: [15915.180394] pcieport-driver 0000:00:07.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100407)
Oct 14 07:55:56 pedro-laptop kernel: [15915.180457] ahci 0000:00:12.0: restoring config space at offset 0x2 (was 0x1018f00, writing 0x1060100)
Oct 14 07:55:56 pedro-laptop kernel: [15915.180484] ahci 0000:00:12.0: set SATA to AHCI mode
Oct 14 07:55:56 pedro-laptop kernel: [15915.180518] ohci_hcd 0000:00:13.0: restoring config space at offset 0x1 (was 0x2a00017, writing 0x2a00013)
Oct 14 07:55:56 pedro-laptop kernel: [15915.180559] ohci_hcd 0000:00:13.1: restoring config space at offset 0x1 (was 0x2a00017, writing 0x2a00013)
Oct 14 07:55:56 pedro-laptop kernel: [15915.180599] ohci_hcd 0000:00:13.2: restoring config space at offset 0x1 (was 0x2a00017, writing 0x2a00013)
Oct 14 07:55:56 pedro-laptop kernel: [15915.180639] ohci_hcd 0000:00:13.3: restoring config space at offset 0x1 (was 0x2a00017, writing 0x2a00013)
Oct 14 07:55:56 pedro-laptop kernel: [15915.180679] ohci_hcd 0000:00:13.4: restoring config space at offset 0x1 (was 0x2a00017, writing 0x2a00013)
Oct 14 07:55:56 pedro-laptop kernel: [15915.180730] ehci_hcd 0000:00:13.5: restoring config space at offset 0x1 (was 0x2b00017, writing 0x2b00013)
Oct 14 07:55:56 pedro-laptop kernel: [15915.180752] ehci_hcd 0000:00:13.5: PME# disabled
Oct 14 07:55:56 pedro-laptop kernel: [15915.180815] pata_atiixp 0000:00:14.1: restoring config space at offset 0x3 (was 0x0, writing 0x4000)
Oct 14 07:55:56 pedro-laptop kernel: [15915.180839] HDA Intel 0000:00:14.2: restoring config space at offset 0xf (was 0x10a, writing 0xa)
Oct 14 07:55:56 pedro-laptop kernel: [15915.180871] HDA Intel 0000:00:14.2: restoring config space at offset 0x1 (was 0x4100006, writing 0x4100002)
Oct 14 07:55:56 pedro-laptop kernel: [15915.180975] pci 0000:01:05.0: restoring config space at offset 0x1 (was 0x100007, writing 0x100003)
Oct 14 07:55:56 pedro-laptop kernel: [15915.181013] sky2 0000:02:00.0: restoring config space at offset 0xf (was 0x100, writing 0x10a)
Oct 14 07:55:56 pedro-laptop kernel: [15915.181034] sky2 0000:02:00.0: restoring config space at offset 0x6 (was 0x1, writing 0xa001)
Oct 14 07:55:56 pedro-laptop kernel: [15915.181042] sky2 0000:02:00.0: restoring config space at offset 0x4 (was 0x4, writing 0xf0400004)
Oct 14 07:55:56 pedro-laptop kernel: [15915.181049] sky2 0000:02:00.0: restoring config space at offset 0x3 (was 0x0, writing 0x8)
Oct 14 07:55:56 pedro-laptop kernel: [15915.181057] sky2 0000:02:00.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100407)
Oct 14 07:55:56 pedro-laptop kernel: [15915.181122] ath5k 0000:08:00.0: restoring config space at offset 0xf (was 0x100, writing 0x10b)
Oct 14 07:55:56 pedro-laptop kernel: [15915.181145] ath5k 0000:08:00.0: restoring config space at offset 0x4 (was 0x4, writing 0xf0300004)
Oct 14 07:55:56 pedro-laptop kernel: [15915.181152] ath5k 0000:08:00.0: restoring config space at offset 0x3 (was 0x0, writing 0x8)
Oct 14 07:55:56 pedro-laptop kernel: [15915.181160] ath5k 0000:08:00.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100007)
Oct 14 07:55:56 pedro-laptop kernel: [15915.500042] Clocksource tsc unstable (delta = -500021781 ns)
Oct 14 07:55:56 pedro-laptop kernel: [15916.570020] ahci 0000:00:12.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
Oct 14 07:55:56 pedro-laptop kernel: [15916.570093] ohci_hcd 0000:00:13.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
Oct 14 07:55:56 pedro-laptop kernel: [15916.592031] ohci_hcd 0000:00:13.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
Oct 14 07:55:56 pedro-laptop kernel: [15916.616034] ohci_hcd 0000:00:13.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
Oct 14 07:55:56 pedro-laptop kernel: [15916.640032] ohci_hcd 0000:00:13.3: PCI INT B -> GSI 17 (level, low) -> IRQ 17
Oct 14 07:55:56 pedro-laptop kernel: [15916.664030] ohci_hcd 0000:00:13.4: PCI INT C -> GSI 18 (level, low) -> IRQ 18
Oct 14 07:55:56 pedro-laptop kernel: [15916.688032] ehci_hcd 0000:00:13.5: PME# disabled
Oct 14 07:55:56 pedro-laptop kernel: [15916.688038] ehci_hcd 0000:00:13.5: PCI INT D -> GSI 19 (level, low) -> IRQ 19
Oct 14 07:55:56 pedro-laptop kernel: [15916.688056] pata_atiixp 0000:00:14.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
Oct 14 07:55:56 pedro-laptop kernel: [15916.688074] HDA Intel 0000:00:14.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16
Oct 14 07:55:56 pedro-laptop kernel: [15916.688113] pci 0000:01:05.0: PME# disabled
Oct 14 07:55:56 pedro-laptop kernel: [15916.688118] pci 0000:01:05.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
Oct 14 07:55:56 pedro-laptop kernel: [15916.688129] sky2 0000:02:00.0: PME# disabled
Oct 14 07:55:56 pedro-laptop kernel: [15916.688177] ath5k 0000:08:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
Oct 14 07:55:56 pedro-laptop kernel: [15916.852547] ata5.00: ACPI cmd ef/03:0c:00:00:00:a0 filtered out
Oct 14 07:55:56 pedro-laptop kernel: [15916.852551] ata5.00: ACPI cmd ef/03:42:00:00:00:a0 filtered out
Oct 14 07:55:56 pedro-laptop kernel: [15916.868493] ata5.00: configured for UDMA/33
Oct 14 07:55:56 pedro-laptop kernel: [15916.888036] usb 1-9: reset high speed USB device using ehci_hcd and address 2
Oct 14 07:55:56 pedro-laptop kernel: [15916.888066] ata2: SATA link down (SStatus 0 SControl 300)
Oct 14 07:55:56 pedro-laptop kernel: [15916.888095] ata3: SATA link down (SStatus 0 SControl 300)
Oct 14 07:55:56 pedro-laptop kernel: [15916.888122] ata4: SATA link down (SStatus 0 SControl 300)
Oct 14 07:55:56 pedro-laptop kernel: [15917.052031] ata1: softreset failed (device not ready)
Oct 14 07:55:57 pedro-laptop NetworkManager: <info>  Waking up...
Oct 14 07:55:57 pedro-laptop kernel: [15917.052035] ata1: applying SB600 PMP SRST workaround and retrying
Oct 14 07:55:57 pedro-laptop kernel: [15917.123007] sd 0:0:0:0: [sda] Starting disk
Oct 14 07:55:57 pedro-laptop NetworkManager: <info>  (eth0): now managed
Oct 14 07:55:57 pedro-laptop kernel: [15917.216038] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
Oct 14 07:55:57 pedro-laptop kernel: [15917.216591] ata1.00: SB600 AHCI: limiting to 255 sectors per cmd
Oct 14 07:55:57 pedro-laptop kernel: [15917.217314] ata1.00: SB600 AHCI: limiting to 255 sectors per cmd
Oct 14 07:55:57 pedro-laptop NetworkManager: <info>  (eth0): device state change: 1 -> 2 (reason 2)
Oct 14 07:55:57 pedro-laptop kernel: [15917.217317] ata1.00: configured for UDMA/100
Oct 14 07:55:57 pedro-laptop kernel: [15917.252118] PM: resume devices took 2.072 seconds
Oct 14 07:55:57 pedro-laptop kernel: [15917.252189] PM: Finishing wakeup.
Oct 14 07:55:57 pedro-laptop NetworkManager: <info>  (eth0): bringing up device.
Oct 14 07:55:57 pedro-laptop kernel: [15917.252191] Restarting tasks ... done.
Oct 14 07:55:57 pedro-laptop NetworkManager: <info>  (eth0): preparing device.
Oct 14 07:55:57 pedro-laptop kernel: [15918.151693] sky2 eth0: enabling interface
Oct 14 07:55:57 pedro-laptop NetworkManager: <info>  (eth0): deactivating device (reason: 2).
Oct 14 07:55:57 pedro-laptop NetworkManager: <info>  Unmanaged Device found; state CONNECTED forced. (see http://bugs.launchpad.net/bugs/191889)
Oct 14 07:55:57 pedro-laptop NetworkManager: <info>  Unmanaged Device found; state CONNECTED forced. (see http://bugs.launchpad.net/bugs/191889)
Oct 14 07:55:57 pedro-laptop NetworkManager: <info>  (wlan0): now managed
Oct 14 07:55:57 pedro-laptop NetworkManager: <info>  (wlan0): device state change: 1 -> 2 (reason 2)
Oct 14 07:55:57 pedro-laptop NetworkManager: <info>  (wlan0): bringing up device.
Oct 14 07:55:57 pedro-laptop NetworkManager: <info>  (wlan0): preparing device.
Oct 14 07:55:57 pedro-laptop NetworkManager: <info>  (wlan0): deactivating device (reason: 2).
Oct 14 07:55:57 pedro-laptop NetworkManager: <info>  (wlan0): supplicant interface state:  starting -> ready
Oct 14 07:55:57 pedro-laptop NetworkManager: <info>  (wlan0): device state change: 2 -> 3 (reason 42)
Oct 14 07:55:58 pedro-laptop NetworkManager: <info>  Sleeping...
Oct 14 07:55:58 pedro-laptop NetworkManager: <info>  (eth0): now unmanaged
Oct 14 07:55:58 pedro-laptop NetworkManager: <info>  (eth0): device state change: 2 -> 1 (reason 37)
Oct 14 07:55:58 pedro-laptop NetworkManager: <info>  (eth0): cleaning up...
Oct 14 07:55:58 pedro-laptop NetworkManager: <info>  (eth0): taking down device.
Oct 14 07:55:58 pedro-laptop NetworkManager: <info>  (wlan0): now unmanaged
Oct 14 07:55:58 pedro-laptop NetworkManager: <info>  (wlan0): device state change: 3 -> 1 (reason 37)
Oct 14 07:55:58 pedro-laptop NetworkManager: <info>  (wlan0): cleaning up...
Oct 14 07:55:58 pedro-laptop NetworkManager: <info>  (wlan0): taking down device.
Oct 14 07:56:21 pedro-laptop kernel: [15918.152072] ADDRCONF(NETDEV_UP): eth0: link is not ready
Oct 14 07:56:21 pedro-laptop kernel: [15918.216579] ADDRCONF(NETDEV_UP): wlan0: link is not ready
Oct 14 07:56:21 pedro-laptop kernel: [15918.905301] [drm] Loading RS600 Microcode
Oct 14 07:56:21 pedro-laptop kernel: [15918.905334] [drm] Num pipes: 1
Oct 14 07:56:21 pedro-laptop kernel: [15919.656040] sky2 eth0: disabling interface
Oct 14 07:56:21 pedro-laptop kernel: [15919.688704] wlan0: deauthenticating by local choice (reason=3)
Oct 14 07:56:21 pedro-laptop kernel: [15920.032234] [drm] Num pipes: 1
Oct 14 07:56:21 pedro-laptop kernel: [15922.164098] PM: Syncing filesystems ... done.
Oct 14 07:56:21 pedro-laptop kernel: [15922.179607] PM: Preparing system for mem sleep
Oct 14 07:56:21 pedro-laptop kernel: [15922.179613] Freezing user space processes ... (elapsed 0.00 seconds) done.
Oct 14 07:56:21 pedro-laptop kernel: [15922.181122] Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done.
Oct 14 07:56:21 pedro-laptop kernel: [15922.181210] PM: Entering mem sleep
Oct 14 07:56:21 pedro-laptop kernel: [15922.181228] Suspending console(s) (use no_console_suspend to debug)
Oct 14 07:56:21 pedro-laptop kernel: [15922.208048] sd 0:0:0:0: [sda] Synchronizing SCSI cache
Oct 14 07:56:21 pedro-laptop kernel: [15922.270698] sd 0:0:0:0: [sda] Stopping disk
Oct 14 07:56:21 pedro-laptop kernel: [15923.718280] ACPI handle has no context!
Oct 14 07:56:21 pedro-laptop kernel: [15923.718374] ath5k 0000:08:00.0: PCI INT A disabled
Oct 14 07:56:21 pedro-laptop kernel: [15923.732115] sky2 0000:02:00.0: PME# disabled
Oct 14 07:56:21 pedro-laptop kernel: [15923.748032] pci 0000:01:05.0: PCI INT A disabled
Oct 14 07:56:21 pedro-laptop kernel: [15923.748047] HDA Intel 0000:00:14.2: PCI INT A disabled
Oct 14 07:56:21 pedro-laptop kernel: [15923.764200] pata_atiixp 0000:00:14.1: PCI INT A disabled
Oct 14 07:56:21 pedro-laptop kernel: [15923.764211] ehci_hcd 0000:00:13.5: PCI INT D disabled
Oct 14 07:56:21 pedro-laptop kernel: [15923.764221] ohci_hcd 0000:00:13.4: PCI INT C disabled
Oct 14 07:56:21 pedro-laptop kernel: [15923.764231] ohci_hcd 0000:00:13.3: PCI INT B disabled
Oct 14 07:56:21 pedro-laptop kernel: [15923.764240] ohci_hcd 0000:00:13.2: PCI INT C disabled
Oct 14 07:56:21 pedro-laptop kernel: [15923.764249] ohci_hcd 0000:00:13.1: PCI INT B disabled
Oct 14 07:56:21 pedro-laptop kernel: [15923.764258] ohci_hcd 0000:00:13.0: PCI INT A disabled
Oct 14 07:56:21 pedro-laptop kernel: [15923.828169] ahci 0000:00:12.0: PCI INT A disabled
Oct 14 07:56:21 pedro-laptop kernel: [15923.832275] PM: suspend devices took 1.652 seconds
Oct 14 07:56:21 pedro-laptop kernel: [15923.832490] ehci_hcd 0000:00:13.5: PME# disabled
Oct 14 07:56:21 pedro-laptop kernel: [15923.936071] ACPI: Preparing to enter system sleep state S3
Oct 14 07:56:21 pedro-laptop kernel: [15923.936798] Disabling non-boot CPUs ...
Oct 14 07:56:21 pedro-laptop kernel: [15924.040018] CPU 1 is now offline
Oct 14 07:56:21 pedro-laptop kernel: [15924.040021] SMP alternatives: switching to UP code
Oct 14 07:56:21 pedro-laptop kernel: [15924.047257] CPU0 attaching NULL sched-domain.
Oct 14 07:56:21 pedro-laptop kernel: [15924.047261] CPU1 attaching NULL sched-domain.
Oct 14 07:56:21 pedro-laptop kernel: [15924.047270] CPU0 attaching NULL sched-domain.
Oct 14 07:56:21 pedro-laptop kernel: [15924.047512] CPU1 is down
Oct 14 07:56:21 pedro-laptop kernel: [15924.047522] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
Oct 14 07:56:21 pedro-laptop kernel: [15924.047522] Back to C!
Oct 14 07:56:21 pedro-laptop kernel: [15924.047522] Enabling non-boot CPUs ...
Oct 14 07:56:21 pedro-laptop kernel: [15924.047522] SMP alternatives: switching to SMP code
Oct 14 07:56:21 pedro-laptop kernel: [15924.054887] Booting processor 1 APIC 0x1 ip 0x6000
Oct 14 07:56:21 pedro-laptop kernel: [15924.047097] Initializing CPU#1
Oct 14 07:56:21 pedro-laptop kernel: [15924.047097] Calibrating delay using timer specific routine.. 3192.19 BogoMIPS (lpj=6384380)
Oct 14 07:56:21 pedro-laptop kernel: [15924.047097] CPU: L1 I cache: 32K, L1 D cache: 32K
Oct 14 07:56:21 pedro-laptop kernel: [15924.047097] CPU: L2 cache: 1024K
Oct 14 07:56:21 pedro-laptop kernel: [15924.047097] CPU: Physical Processor ID: 0
Oct 14 07:56:21 pedro-laptop kernel: [15924.047097] CPU: Processor Core ID: 1
Oct 14 07:56:21 pedro-laptop kernel: [15924.047097] x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106
Oct 14 07:56:21 pedro-laptop kernel: [15924.145967] CPU1: Intel(R) Pentium(R) Dual  CPU  T2330  @ 1.60GHz stepping 0d
Oct 14 07:56:21 pedro-laptop kernel: [15924.146040] CPU0 attaching NULL sched-domain.
Oct 14 07:56:21 pedro-laptop kernel: [15924.149018] Switched to high resolution mode on CPU 1
Oct 14 07:56:21 pedro-laptop kernel: [15924.160022] CPU0 attaching sched-domain:
Oct 14 07:56:21 pedro-laptop kernel: [15924.160025]  domain 0: span 0-1 level MC
Oct 14 07:56:21 pedro-laptop kernel: [15924.160028]   groups: 0 1
Oct 14 07:56:21 pedro-laptop kernel: [15924.160034] CPU1 attaching sched-domain:
Oct 14 07:56:21 pedro-laptop kernel: [15924.160036]  domain 0: span 0-1 level MC
Oct 14 07:56:21 pedro-laptop kernel: [15924.160039]   groups: 1 0
Oct 14 07:56:21 pedro-laptop kernel: [15924.161021] CPU1 is up
Oct 14 07:56:21 pedro-laptop kernel: [15924.161025] ACPI: Waking up from system sleep state S3
Oct 14 07:56:21 pedro-laptop kernel: [15924.604197] pcieport-driver 0000:00:04.0: restoring config space at offset 0xf (was 0xff, writing 0x400ff)
Oct 14 07:56:21 pedro-laptop kernel: [15924.604208] pcieport-driver 0000:00:04.0: restoring config space at offset 0x9 (was 0x10001, writing 0x1fff1)
Oct 14 07:56:21 pedro-laptop kernel: [15924.604213] pcieport-driver 0000:00:04.0: restoring config space at offset 0x8 (was 0x0, writing 0xf040f040)
Oct 14 07:56:21 pedro-laptop kernel: [15924.604218] pcieport-driver 0000:00:04.0: restoring config space at offset 0x7 (was 0x101, writing 0xa1a1)
Oct 14 07:56:21 pedro-laptop kernel: [15924.604223] pcieport-driver 0000:00:04.0: restoring config space at offset 0x6 (was 0x0, writing 0x40200)
Oct 14 07:56:21 pedro-laptop kernel: [15924.604230] pcieport-driver 0000:00:04.0: restoring config space at offset 0x3 (was 0x10000, writing 0x10008)
Oct 14 07:56:21 pedro-laptop kernel: [15924.604237] pcieport-driver 0000:00:04.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100407)
Oct 14 07:56:21 pedro-laptop kernel: [15924.604277] pcieport-driver 0000:00:06.0: restoring config space at offset 0xf (was 0xff, writing 0x400ff)
Oct 14 07:56:21 pedro-laptop kernel: [15924.604287] pcieport-driver 0000:00:06.0: restoring config space at offset 0x9 (was 0x10001, writing 0x1fff1)
Oct 14 07:56:21 pedro-laptop kernel: [15924.604292] pcieport-driver 0000:00:06.0: restoring config space at offset 0x8 (was 0x0, writing 0xfff0)
Oct 14 07:56:21 pedro-laptop kernel: [15924.604297] pcieport-driver 0000:00:06.0: restoring config space at offset 0x7 (was 0x101, writing 0x1f1)
Oct 14 07:56:21 pedro-laptop kernel: [15924.604302] pcieport-driver 0000:00:06.0: restoring config space at offset 0x6 (was 0x0, writing 0x70500)
Oct 14 07:56:21 pedro-laptop kernel: [15924.604309] pcieport-driver 0000:00:06.0: restoring config space at offset 0x3 (was 0x10000, writing 0x10008)
Oct 14 07:56:21 pedro-laptop kernel: [15924.604316] pcieport-driver 0000:00:06.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100404)
Oct 14 07:56:21 pedro-laptop kernel: [15924.604354] pcieport-driver 0000:00:07.0: restoring config space at offset 0xf (was 0xff, writing 0x400ff)
Oct 14 07:56:21 pedro-laptop kernel: [15924.604365] pcieport-driver 0000:00:07.0: restoring config space at offset 0x9 (was 0x10001, writing 0x1fff1)
Oct 14 07:56:21 pedro-laptop kernel: [15924.604370] pcieport-driver 0000:00:07.0: restoring config space at offset 0x8 (was 0x0, writing 0xf030f030)
Oct 14 07:56:21 pedro-laptop kernel: [15924.604375] pcieport-driver 0000:00:07.0: restoring config space at offset 0x7 (was 0x101, writing 0x1f1)
Oct 14 07:56:21 pedro-laptop kernel: [15924.604380] pcieport-driver 0000:00:07.0: restoring config space at offset 0x6 (was 0x0, writing 0xa0800)
Oct 14 07:56:21 pedro-laptop kernel: [15924.604388] pcieport-driver 0000:00:07.0: restoring config space at offset 0x3 (was 0x10000, writing 0x10008)
Oct 14 07:56:21 pedro-laptop kernel: [15924.604394] pcieport-driver 0000:00:07.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100407)
Oct 14 07:56:21 pedro-laptop kernel: [15924.604457] ahci 0000:00:12.0: restoring config space at offset 0x2 (was 0x1018f00, writing 0x1060100)
Oct 14 07:56:21 pedro-laptop kernel: [15924.604484] ahci 0000:00:12.0: set SATA to AHCI mode
Oct 14 07:56:21 pedro-laptop kernel: [15924.604518] ohci_hcd 0000:00:13.0: restoring config space at offset 0x1 (was 0x2a00017, writing 0x2a00013)
Oct 14 07:56:21 pedro-laptop kernel: [15924.604559] ohci_hcd 0000:00:13.1: restoring config space at offset 0x1 (was 0x2a00017, writing 0x2a00013)
Oct 14 07:56:21 pedro-laptop kernel: [15924.604599] ohci_hcd 0000:00:13.2: restoring config space at offset 0x1 (was 0x2a00017, writing 0x2a00013)
Oct 14 07:56:21 pedro-laptop kernel: [15924.604639] ohci_hcd 0000:00:13.3: restoring config space at offset 0x1 (was 0x2a00017, writing 0x2a00013)
Oct 14 07:56:21 pedro-laptop kernel: [15924.604679] ohci_hcd 0000:00:13.4: restoring config space at offset 0x1 (was 0x2a00017, writing 0x2a00013)
Oct 14 07:56:21 pedro-laptop kernel: [15924.604730] ehci_hcd 0000:00:13.5: restoring config space at offset 0x1 (was 0x2b00017, writing 0x2b00013)
Oct 14 07:56:21 pedro-laptop kernel: [15924.604752] ehci_hcd 0000:00:13.5: PME# disabled
Oct 14 07:56:21 pedro-laptop kernel: [15924.604815] pata_atiixp 0000:00:14.1: restoring config space at offset 0x3 (was 0x0, writing 0x4000)
Oct 14 07:56:21 pedro-laptop kernel: [15924.604839] HDA Intel 0000:00:14.2: restoring config space at offset 0xf (was 0x10a, writing 0xa)
Oct 14 07:56:21 pedro-laptop kernel: [15924.604870] HDA Intel 0000:00:14.2: restoring config space at offset 0x1 (was 0x4100006, writing 0x4100002)
Oct 14 07:56:21 pedro-laptop kernel: [15924.604975] pci 0000:01:05.0: restoring config space at offset 0x1 (was 0x100007, writing 0x100003)
Oct 14 07:56:21 pedro-laptop kernel: [15924.605013] sky2 0000:02:00.0: restoring config space at offset 0xf (was 0x100, writing 0x10a)
Oct 14 07:56:21 pedro-laptop kernel: [15924.605034] sky2 0000:02:00.0: restoring config space at offset 0x6 (was 0x1, writing 0xa001)
Oct 14 07:56:21 pedro-laptop kernel: [15924.605042] sky2 0000:02:00.0: restoring config space at offset 0x4 (was 0x4, writing 0xf0400004)
Oct 14 07:56:21 pedro-laptop kernel: [15924.605049] sky2 0000:02:00.0: restoring config space at offset 0x3 (was 0x0, writing 0x8)
Oct 14 07:56:21 pedro-laptop kernel: [15924.605057] sky2 0000:02:00.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100407)
Oct 14 07:56:21 pedro-laptop kernel: [15924.605122] ath5k 0000:08:00.0: restoring config space at offset 0xf (was 0x100, writing 0x10b)
Oct 14 07:56:21 pedro-laptop kernel: [15924.605146] ath5k 0000:08:00.0: restoring config space at offset 0x4 (was 0x4, writing 0xf0300004)
Oct 14 07:56:21 pedro-laptop kernel: [15924.605152] ath5k 0000:08:00.0: restoring config space at offset 0x3 (was 0x0, writing 0x8)
Oct 14 07:56:21 pedro-laptop kernel: [15924.605160] ath5k 0000:08:00.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100007)
Oct 14 07:56:21 pedro-laptop kernel: [15925.993906] ahci 0000:00:12.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
Oct 14 07:56:21 pedro-laptop kernel: [15925.993979] ohci_hcd 0000:00:13.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
Oct 14 07:56:21 pedro-laptop kernel: [15926.016031] ohci_hcd 0000:00:13.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
Oct 14 07:56:21 pedro-laptop kernel: [15926.040030] ohci_hcd 0000:00:13.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
Oct 14 07:56:21 pedro-laptop kernel: [15926.064026] ohci_hcd 0000:00:13.3: PCI INT B -> GSI 17 (level, low) -> IRQ 17
Oct 14 07:56:21 pedro-laptop kernel: [15926.088025] ohci_hcd 0000:00:13.4: PCI INT C -> GSI 18 (level, low) -> IRQ 18
Oct 14 07:56:21 pedro-laptop kernel: [15926.112026] ehci_hcd 0000:00:13.5: PME# disabled
Oct 14 07:56:21 pedro-laptop kernel: [15926.112032] ehci_hcd 0000:00:13.5: PCI INT D -> GSI 19 (level, low) -> IRQ 19
Oct 14 07:56:21 pedro-laptop kernel: [15926.112050] pata_atiixp 0000:00:14.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
Oct 14 07:56:21 pedro-laptop kernel: [15926.112068] HDA Intel 0000:00:14.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16
Oct 14 07:56:21 pedro-laptop kernel: [15926.112107] pci 0000:01:05.0: PME# disabled
Oct 14 07:56:21 pedro-laptop kernel: [15926.112112] pci 0000:01:05.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
Oct 14 07:56:21 pedro-laptop kernel: [15926.112123] sky2 0000:02:00.0: PME# disabled
Oct 14 07:56:21 pedro-laptop kernel: [15926.112172] ath5k 0000:08:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
Oct 14 07:56:21 pedro-laptop kernel: [15926.276546] ata5.00: ACPI cmd ef/03:0c:00:00:00:a0 filtered out
Oct 14 07:56:21 pedro-laptop kernel: [15926.276551] ata5.00: ACPI cmd ef/03:42:00:00:00:a0 filtered out
Oct 14 07:56:21 pedro-laptop kernel: [15926.292494] ata5.00: configured for UDMA/33
Oct 14 07:56:21 pedro-laptop kernel: [15926.312036] usb 1-9: reset high speed USB device using ehci_hcd and address 2
Oct 14 07:56:21 pedro-laptop kernel: [15926.312066] ata2: SATA link down (SStatus 0 SControl 300)
Oct 14 07:56:21 pedro-laptop kernel: [15926.312095] ata3: SATA link down (SStatus 0 SControl 300)
Oct 14 07:56:21 pedro-laptop kernel: [15926.312122] ata4: SATA link down (SStatus 0 SControl 300)
Oct 14 07:56:21 pedro-laptop kernel: [15926.476029] ata1: softreset failed (device not ready)
Oct 14 07:56:21 pedro-laptop kernel: [15926.476033] ata1: applying SB600 PMP SRST workaround and retrying
Oct 14 07:56:21 pedro-laptop kernel: [15926.547001] sd 0:0:0:0: [sda] Starting disk
Oct 14 07:56:22 pedro-laptop NetworkManager: <info>  Waking up...
Oct 14 07:56:22 pedro-laptop NetworkManager: <info>  (eth0): now managed
Oct 14 07:56:22 pedro-laptop NetworkManager: <info>  (eth0): device state change: 1 -> 2 (reason 2)
Oct 14 07:56:22 pedro-laptop NetworkManager: <info>  (eth0): bringing up device.
Oct 14 07:56:22 pedro-laptop NetworkManager: <info>  (eth0): preparing device.
Oct 14 07:56:22 pedro-laptop NetworkManager: <info>  (eth0): deactivating device (reason: 2).
Oct 14 07:56:22 pedro-laptop NetworkManager: <info>  Unmanaged Device found; state CONNECTED forced. (see http://bugs.launchpad.net/bugs/191889)
Oct 14 07:56:22 pedro-laptop NetworkManager: <info>  Unmanaged Device found; state CONNECTED forced. (see http://bugs.launchpad.net/bugs/191889)
Oct 14 07:56:22 pedro-laptop NetworkManager: <info>  (wlan0): now managed
Oct 14 07:56:22 pedro-laptop NetworkManager: <info>  (wlan0): device state change: 1 -> 2 (reason 2)
Oct 14 07:56:22 pedro-laptop NetworkManager: <info>  (wlan0): bringing up device.
Oct 14 07:56:22 pedro-laptop NetworkManager: <info>  (wlan0): preparing device.
Oct 14 07:56:22 pedro-laptop NetworkManager: <info>  (wlan0): deactivating device (reason: 2).
Oct 14 07:56:22 pedro-laptop kernel: [15926.696037] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
Oct 14 07:56:22 pedro-laptop kernel: [15926.696567] ata1.00: SB600 AHCI: limiting to 255 sectors per cmd
Oct 14 07:56:22 pedro-laptop kernel: [15926.697212] ata1.00: SB600 AHCI: limiting to 255 sectors per cmd
Oct 14 07:56:22 pedro-laptop kernel: [15926.697215] ata1.00: configured for UDMA/100
Oct 14 07:56:22 pedro-laptop kernel: [15926.732662] PM: resume devices took 2.128 seconds
Oct 14 07:56:22 pedro-laptop kernel: [15926.732734] PM: Finishing wakeup.
Oct 14 07:56:22 pedro-laptop kernel: [15926.732736] Restarting tasks ... done.
Oct 14 07:56:22 pedro-laptop kernel: [15927.420527] sky2 eth0: enabling interface
Oct 14 07:56:22 pedro-laptop kernel: [15927.420771] ADDRCONF(NETDEV_UP): eth0: link is not ready
Oct 14 07:56:22 pedro-laptop NetworkManager: <info>  (wlan0): supplicant interface state:  starting -> ready
Oct 14 07:56:22 pedro-laptop NetworkManager: <info>  (wlan0): device state change: 2 -> 3 (reason 42)
Oct 14 09:13:49 pedro-laptop NetworkManager: <info>  Sleeping...
Oct 14 09:13:49 pedro-laptop NetworkManager: <info>  (eth0): now unmanaged
Oct 14 09:13:49 pedro-laptop NetworkManager: <info>  (eth0): device state change: 2 -> 1 (reason 37)
Oct 14 09:13:49 pedro-laptop NetworkManager: <info>  (eth0): cleaning up...
Oct 14 09:13:49 pedro-laptop NetworkManager: <info>  (eth0): taking down device.
Oct 14 09:13:49 pedro-laptop NetworkManager: <info>  (wlan0): now unmanaged
Oct 14 09:13:49 pedro-laptop NetworkManager: <info>  (wlan0): device state change: 3 -> 1 (reason 37)
Oct 14 09:13:49 pedro-laptop NetworkManager: <info>  (wlan0): cleaning up...
Oct 14 09:13:49 pedro-laptop NetworkManager: <info>  (wlan0): taking down device.
Oct 14 09:23:44 pedro-laptop kernel: imklog 4.2.0, log source = /var/run/rsyslog/kmsg started.
Oct 14 09:23:44 pedro-laptop kernel: [    0.000000] Initializing cgroup subsys cpuset
Oct 14 09:23:44 pedro-laptop kernel: [    0.000000] Initializing cgroup subsys cpu
Oct 14 09:23:44 pedro-laptop kernel: [    0.000000] Linux version 2.6.31-13-generic (buildd@rothera) (gcc version 4.4.1 (Ubuntu 4.4.1-4ubuntu7) ) #45-Ubuntu SMP Tue Oct 13 02:08:03 UTC 2009 (Ubuntu 2.6.31-13.45-generic)
Oct 14 09:23:44 pedro-laptop kernel: [    0.000000] KERNEL supported cpus:
Oct 14 09:23:44 pedro-laptop kernel: [    0.000000]   Intel GenuineIntel
Oct 14 09:23:44 pedro-laptop kernel: [    0.000000]   AMD AuthenticAMD
Oct 14 09:23:44 pedro-laptop kernel: [    0.000000]   NSC Geode by NSC
Oct 14 09:23:44 pedro-laptop kernel: [    0.000000]   Cyrix CyrixInstead
Oct 14 09:23:44 pedro-laptop kernel: [    0.000000]   Centaur CentaurHauls
Oct 14 09:23:44 pedro-laptop kernel: [    0.000000]   Transmeta GenuineTMx86
Oct 14 09:23:44 pedro-laptop kernel: [    0.000000]   Transmeta TransmetaCPU
Oct 14 09:23:44 pedro-laptop kernel: [    0.000000]   UMC UMC UMC UMC
Oct 14 09:23:44 pedro-laptop kernel: [    0.000000] BIOS-provided physical RAM map:
Oct 14 09:23:44 pedro-laptop kernel: [    0.000000]  BIOS-e820: 0000000000000000 - 000000000009dc00 (usable)
Oct 14 09:23:44 pedro-laptop kernel: [    0.000000]  BIOS-e820: 000000000009dc00 - 00000000000a0000 (reserved)
Oct 14 09:23:44 pedro-laptop kernel: [    0.000000]  BIOS-e820: 00000000000ce000 - 00000000000d0000 (reserved)
Oct 14 09:23:44 pedro-laptop kernel: [    0.000000]  BIOS-e820: 00000000000dc000 - 00000000000e0000 (reserved)
Oct 14 09:23:44 pedro-laptop kernel: [    0.000000]  BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
Oct 14 09:23:44 pedro-laptop kernel: [    0.000000]  BIOS-e820: 0000000000100000 - 000000008fe80000 (usable)
Oct 14 09:23:44 pedro-laptop kernel: [    0.000000]  BIOS-e820: 000000008fe80000 - 000000008fe98000 (ACPI data)
Oct 14 09:23:44 pedro-laptop kernel: [    0.000000]  BIOS-e820: 000000008fe98000 - 000000008fe9a000 (ACPI NVS)
Oct 14 09:23:44 pedro-laptop kernel: [    0.000000]  BIOS-e820: 000000008fe9a000 - 0000000090000000 (reserved)
Oct 14 09:23:44 pedro-laptop kernel: [    0.000000]  BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
Oct 14 09:23:44 pedro-laptop kernel: [    0.000000]  BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
Oct 14 09:23:44 pedro-laptop kernel: [    0.000000]  BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
Oct 14 09:23:44 pedro-laptop kernel: [    0.000000]  BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
Oct 14 09:23:44 pedro-laptop kernel: [    0.000000] DMI present.
Oct 14 09:23:44 pedro-laptop kernel: [    0.000000] Phoenix BIOS detected: BIOS may corrupt low RAM, working around it.
Oct 14 09:23:44 pedro-laptop kernel: [    0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
Oct 14 09:23:44 pedro-laptop kernel: [    0.000000] last_pfn = 0x8fe80 max_arch_pfn = 0x100000
Oct 14 09:23:44 pedro-laptop kernel: [    0.000000] MTRR default type: uncachable
Oct 14 09:23:44 pedro-laptop kernel: [    0.000000] MTRR fixed ranges enabled:
Oct 14 09:23:44 pedro-laptop kernel: [    0.000000]   00000-9FFFF write-back
Oct 14 09:23:44 pedro-laptop kernel: [    0.000000]   A0000-BFFFF uncachable
Oct 14 09:23:44 pedro-laptop kernel: [    0.000000]   C0000-CFFFF write-protect
Oct 14 09:23:44 pedro-laptop kernel: [    0.000000]   D0000-DFFFF uncachable
Oct 14 09:23:44 pedro-laptop kernel: [    0.000000]   E0000-FFFFF write-protect
Oct 14 09:23:44 pedro-laptop kernel: [    0.000000] MTRR variable ranges enabled:
Oct 14 09:23:44 pedro-laptop kernel: [    0.000000]   0 base 000000000 mask F80000000 write-back
Oct 14 09:23:44 pedro-laptop kernel: [    0.000000]   1 base 080000000 mask FF0000000 write-back
Oct 14 09:23:44 pedro-laptop kernel: [    0.000000]   2 base 08FF00000 mask FFFF00000 uncachable
Oct 14 09:23:44 pedro-laptop kernel: [    0.000000]   3 disabled
Oct 14 09:23:44 pedro-laptop kernel: [    0.000000]   4 disabled
Oct 14 09:23:44 pedro-laptop kernel: [    0.000000]   5 disabled
Oct 14 09:23:44 pedro-laptop kernel: [    0.000000]   6 disabled
Oct 14 09:23:44 pedro-laptop kernel: [    0.000000]   7 disabled
Oct 14 09:23:44 pedro-laptop kernel: [    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
Oct 14 09:23:44 pedro-laptop kernel: [    0.000000] Scanning 0 areas for low memory corruption
Oct 14 09:23:44 pedro-laptop kernel: [    0.000000] modified physical RAM map:
Oct 14 09:23:44 pedro-laptop kernel: [    0.000000]  modified: 0000000000000000 - 0000000000010000 (reserved)
Oct 14 09:23:44 pedro-laptop kernel: [    0.000000]  modified: 0000000000010000 - 000000000009dc00 (usable)
Oct 14 09:23:44 pedro-laptop kernel: [    0.000000]  modified: 000000000009dc00 - 00000000000a0000 (reserved)
Oct 14 09:23:44 pedro-laptop kernel: [    0.000000]  modified: 00000000000ce000 - 00000000000d0000 (reserved)
Oct 14 09:23:44 pedro-laptop kernel: [    0.000000]  modified: 00000000000dc000 - 00000000000e0000 (reserved)
Oct 14 09:23:44 pedro-laptop kernel: [    0.000000]  modified: 00000000000e4000 - 0000000000100000 (reserved)
Oct 14 09:23:44 pedro-laptop kernel: [    0.000000]  modified: 0000000000100000 - 000000008fe80000 (usable)
Oct 14 09:23:44 pedro-laptop kernel: [    0.000000]  modified: 000000008fe80000 - 000000008fe98000 (ACPI data)
Oct 14 09:23:44 pedro-laptop kernel: [    0.000000]  modified: 000000008fe98000 - 000000008fe9a000 (ACPI NVS)
Oct 14 09:23:44 pedro-laptop kernel: [    0.000000]  modified: 000000008fe9a000 - 0000000090000000 (reserved)
Oct 14 09:23:44 pedro-laptop kernel: [    0.000000]  modified: 00000000e0000000 - 00000000f0000000 (reserved)
Oct 14 09:23:44 pedro-laptop kernel: [    0.000000]  modified: 00000000fec00000 - 00000000fec10000 (reserved)
Oct 14 09:23:44 pedro-laptop kernel: [    0.000000]  modified: 00000000fee00000 - 00000000fee01000 (reserved)
Oct 14 09:23:44 pedro-laptop kernel: [    0.000000]  modified: 00000000fff00000 - 0000000100000000 (reserved)
Oct 14 09:23:44 pedro-laptop kernel: [    0.000000] initial memory mapped : 0 - 00c00000
Oct 14 09:23:44 pedro-laptop kernel: [    0.000000] init_memory_mapping: 0000000000000000-00000000377fe000
Oct 14 09:23:44 pedro-laptop kernel: [    0.000000] Using x86 segment limits to approximate NX protection
Oct 14 09:23:44 pedro-laptop kernel: [    0.000000]  0000000000 - 0000400000 page 4k
Oct 14 09:23:44 pedro-laptop kernel: [    0.000000]  0000400000 - 0037400000 page 2M
Oct 14 09:23:44 pedro-laptop kernel: [    0.000000]  0037400000 - 00377fe000 page 4k
Oct 14 09:23:44 pedro-laptop kernel: [    0.000000] kernel direct mapping tables up to 377fe000 @ 10000-15000
Oct 14 09:23:44 pedro-laptop kernel: [    0.000000] RAMDISK: 3789e000 - 37fef600
Oct 14 09:23:44 pedro-laptop kernel: [    0.000000] Allocated new RAMDISK: 008a6000 - 00ff7600
Oct 14 09:23:44 pedro-laptop kernel: [    0.000000] Move RAMDISK from 000000003789e000 - 0000000037fef5ff to 008a6000 - 00ff75ff
Oct 14 09:23:44 pedro-laptop kernel: [    0.000000] ACPI: RSDP 000f7e90 00024 (v02 PTLTD )
Oct 14 09:23:44 pedro-laptop kernel: [    0.000000] ACPI: XSDT 8fe89de0 0006C (v01 LGE    LGPC     06040000  LTP 00000000)
Oct 14 09:23:44 pedro-laptop kernel: [    0.000000] ACPI: TCPA 8fe97c9c 00032 (v02 INTEL           06040000 PTEC 00000000)
Oct 14 09:23:44 pedro-laptop kernel: [    0.000000] ACPI: FACP 8fe97cce 000F4 (v03 ATI    Alfonsin 06040000 ATI  000F4240)
Oct 14 09:23:44 pedro-laptop kernel: [    0.000000] ACPI: DSDT 8fe8d752 0A4D6 (v01    LGE  LHOTSE2 06040000 MSFT 0100000E)
Oct 14 09:23:44 pedro-laptop kernel: [    0.000000] ACPI: FACS 8fe99fc0 00040
Oct 14 09:23:44 pedro-laptop kernel: [    0.000000] ACPI: SLIC 8fe97dc2 00176 (v01 LGE    LGPC     06040000 YSB  00000001)
Oct 14 09:23:44 pedro-laptop kernel: [    0.000000] ACPI: APIC 8fe97f38 00054 (v01 PTLTD  	 APIC   06040000  LTP 00000000)
Oct 14 09:23:44 pedro-laptop kernel: [    0.000000] ACPI: MCFG 8fe97f8c 0003C (v01 PTLTD    MCFG   06040000  LTP 00000000)
Oct 14 09:23:44 pedro-laptop kernel: [    0.000000] ACPI: HPET 8fe97fc8 00038 (v01 PTLTD  HPETTBL  06040000  LTP 00000001)
Oct 14 09:23:44 pedro-laptop kernel: [    0.000000] ACPI: SSDT 8fe8b2f7 0025F (v01  PmRef  Cpu0Tst 00003000 INTL 20050228)
Oct 14 09:23:44 pedro-laptop kernel: [    0.000000] ACPI: SSDT 8fe8b251 000A6 (v01  PmRef  Cpu1Tst 00003000 INTL 20050228)
Oct 14 09:23:44 pedro-laptop kernel: [    0.000000] ACPI: SSDT 8fe89e4c 01405 (v01  PmRef    CpuPm 00003000 INTL 20050228)
Oct 14 09:23:44 pedro-laptop kernel: [    0.000000] ACPI: Local APIC address 0xfee00000
Oct 14 09:23:44 pedro-laptop kernel: [    0.000000] 1414MB HIGHMEM available.
Oct 14 09:23:44 pedro-laptop kernel: [    0.000000] 887MB LOWMEM available.
Oct 14 09:23:44 pedro-laptop kernel: [    0.000000]   mapped low ram: 0 - 377fe000
Oct 14 09:23:44 pedro-laptop kernel: [    0.000000]   low ram: 0 - 377fe000
Oct 14 09:23:44 pedro-laptop kernel: [    0.000000]   node 0 low ram: 00000000 - 377fe000
Oct 14 09:23:44 pedro-laptop kernel: [    0.000000]   node 0 bootmap 00011000 - 00017f00
Oct 14 09:23:44 pedro-laptop kernel: [    0.000000] (9 early reservations) ==> bootmem [0000000000 - 00377fe000]
Oct 14 09:23:44 pedro-laptop kernel: [    0.000000]   #0 [0000000000 - 0000001000]   BIOS data page ==> [0000000000 - 0000001000]
Oct 14 09:23:44 pedro-laptop kernel: [    0.000000]   #1 [0000001000 - 0000002000]    EX TRAMPOLINE ==> [0000001000 - 0000002000]
Oct 14 09:23:44 pedro-laptop kernel: [    0.000000]   #2 [0000006000 - 0000007000]       TRAMPOLINE ==> [0000006000 - 0000007000]
Oct 14 09:23:44 pedro-laptop kernel: [    0.000000]   #3 [0000100000 - 00008a10a0]    TEXT DATA BSS ==> [0000100000 - 00008a10a0]
Oct 14 09:23:44 pedro-laptop kernel: [    0.000000]   #4 [000009dc00 - 0000100000]    BIOS reserved ==> [000009dc00 - 0000100000]
Oct 14 09:23:44 pedro-laptop kernel: [    0.000000]   #5 [00008a2000 - 00008a5134]              BRK ==> [00008a2000 - 00008a5134]
Oct 14 09:23:44 pedro-laptop kernel: [    0.000000]   #6 [0000010000 - 0000011000]          PGTABLE ==> [0000010000 - 0000011000]
Oct 14 09:23:44 pedro-laptop kernel: [    0.000000]   #7 [00008a6000 - 0000ff7600]      NEW RAMDISK ==> [00008a6000 - 0000ff7600]
Oct 14 09:23:44 pedro-laptop kernel: [    0.000000]   #8 [0000011000 - 0000018000]          BOOTMAP ==> [0000011000 - 0000018000]
Oct 14 09:23:44 pedro-laptop kernel: [    0.000000] found SMP MP-table at [c00f7ec0] f7ec0
Oct 14 09:23:44 pedro-laptop kernel: [    0.000000] Zone PFN ranges:
Oct 14 09:23:44 pedro-laptop kernel: [    0.000000]   DMA      0x00000010 -> 0x00001000
Oct 14 09:23:44 pedro-laptop kernel: [    0.000000]   Normal   0x00001000 -> 0x000377fe
Oct 14 09:23:44 pedro-laptop kernel: [    0.000000]   HighMem  0x000377fe -> 0x0008fe80
Oct 14 09:23:44 pedro-laptop kernel: [    0.000000] Movable zone start PFN for each node
Oct 14 09:23:44 pedro-laptop kernel: [    0.000000] early_node_map[2] active PFN ranges
Oct 14 09:23:44 pedro-laptop kernel: [    0.000000]     0: 0x00000010 -> 0x0000009d
Oct 14 09:23:44 pedro-laptop kernel: [    0.000000]     0: 0x00000100 -> 0x0008fe80
Oct 14 09:23:44 pedro-laptop kernel: [    0.000000] On node 0 totalpages: 589325
Oct 14 09:23:44 pedro-laptop kernel: [    0.000000] free_area_init_node: node 0, pgdat c077d860, node_mem_map c1000200
Oct 14 09:23:44 pedro-laptop kernel: [    0.000000]   DMA zone: 32 pages used for memmap
Oct 14 09:23:44 pedro-laptop kernel: [    0.000000]   DMA zone: 0 pages reserved
Oct 14 09:23:44 pedro-laptop kernel: [    0.000000]   DMA zone: 3949 pages, LIFO batch:0
Oct 14 09:23:44 pedro-laptop kernel: [    0.000000]   Normal zone: 1744 pages used for memmap
Oct 14 09:23:44 pedro-laptop kernel: [    0.000000]   Normal zone: 221486 pages, LIFO batch:31
Oct 14 09:23:44 pedro-laptop kernel: [    0.000000]   HighMem zone: 2830 pages used for memmap
Oct 14 09:23:44 pedro-laptop kernel: [    0.000000]   HighMem zone: 359284 pages, LIFO batch:31
Oct 14 09:23:44 pedro-laptop kernel: [    0.000000] Using APIC driver default
Oct 14 09:23:44 pedro-laptop kernel: [    0.000000] ACPI: PM-Timer IO Port: 0x8008
Oct 14 09:23:44 pedro-laptop kernel: [    0.000000] ACPI: Local APIC address 0xfee00000
Oct 14 09:23:44 pedro-laptop kernel: [    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
Oct 14 09:23:44 pedro-laptop kernel: [    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
Oct 14 09:23:44 pedro-laptop kernel: [    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
Oct 14 09:23:44 pedro-laptop kernel: [    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
Oct 14 09:23:44 pedro-laptop kernel: [    0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
Oct 14 09:23:44 pedro-laptop kernel: [    0.000000] IOAPIC[0]: apic_id 2, version 33, address 0xfec00000, GSI 0-23
Oct 14 09:23:44 pedro-laptop kernel: [    0.000000] ACPI: IRQ9 used by override.
Oct 14 09:23:44 pedro-laptop kernel: [    0.000000] Enabling APIC mode:  Flat.  Using 1 I/O APICs
Oct 14 09:23:44 pedro-laptop kernel: [    0.000000] Using ACPI (MADT) for SMP configuration information
Oct 14 09:23:44 pedro-laptop kernel: [    0.000000] ACPI: HPET id: 0x43538301 base: 0xfed00000
Oct 14 09:23:44 pedro-laptop kernel: [    0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
Oct 14 09:23:44 pedro-laptop kernel: [    0.000000] nr_irqs_gsi: 24
Oct 14 09:23:44 pedro-laptop kernel: [    0.000000] PM: Registered nosave memory: 000000000009d000 - 000000000009e000
Oct 14 09:23:44 pedro-laptop kernel: [    0.000000] PM: Registered nosave memory: 000000000009e000 - 00000000000a0000
Oct 14 09:23:44 pedro-laptop kernel: [    0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000ce000
Oct 14 09:23:44 pedro-laptop kernel: [    0.000000] PM: Registered nosave memory: 00000000000ce000 - 00000000000d0000
Oct 14 09:23:44 pedro-laptop kernel: [    0.000000] PM: Registered nosave memory: 00000000000d0000 - 00000000000dc000
Oct 14 09:23:44 pedro-laptop kernel: [    0.000000] PM: Registered nosave memory: 00000000000dc000 - 00000000000e0000
Oct 14 09:23:44 pedro-laptop kernel: [    0.000000] PM: Registered nosave memory: 00000000000e0000 - 00000000000e4000
Oct 14 09:23:44 pedro-laptop kernel: [    0.000000] PM: Registered nosave memory: 00000000000e4000 - 0000000000100000
Oct 14 09:23:44 pedro-laptop kernel: [    0.000000] Allocating PCI resources starting at 90000000 (gap: 90000000:50000000)
Oct 14 09:23:44 pedro-laptop kernel: [    0.000000] NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1
Oct 14 09:23:44 pedro-laptop kernel: [    0.000000] PERCPU: Embedded 14 pages at c220a000, static data 35068 bytes
Oct 14 09:23:44 pedro-laptop kernel: [    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 584719
Oct 14 09:23:44 pedro-laptop kernel: [    0.000000] Kernel command line: root=UUID=25e5a657-6cf2-4ca7-9466-87e9ad8705f3 ro locale=pt_BR quiet splash 
Oct 14 09:23:44 pedro-laptop kernel: [    0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes)
Oct 14 09:23:44 pedro-laptop kernel: [    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Oct 14 09:23:44 pedro-laptop kernel: [    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Oct 14 09:23:44 pedro-laptop kernel: [    0.000000] Enabling fast FPU save and restore... done.
Oct 14 09:23:44 pedro-laptop kernel: [    0.000000] Enabling unmasked SIMD FPU exception support... done.
Oct 14 09:23:44 pedro-laptop kernel: [    0.000000] Initializing CPU#0
Oct 14 09:23:44 pedro-laptop kernel: [    0.000000] allocated 11788480 bytes of page_cgroup
Oct 14 09:23:44 pedro-laptop kernel: [    0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
Oct 14 09:23:44 pedro-laptop kernel: [    0.000000] Initializing HighMem for node 0 (000377fe:0008fe80)
Oct 14 09:23:44 pedro-laptop kernel: [    0.000000] Memory: 2310220k/2357760k available (4548k kernel code, 46240k reserved, 2131k data, 540k init, 1448456k highmem)
Oct 14 09:23:44 pedro-laptop kernel: [    0.000000] virtual kernel memory layout:
Oct 14 09:23:44 pedro-laptop kernel: [    0.000000]     fixmap  : 0xfff1d000 - 0xfffff000   ( 904 kB)
Oct 14 09:23:44 pedro-laptop kernel: [    0.000000]     pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
Oct 14 09:23:44 pedro-laptop kernel: [    0.000000]     vmalloc : 0xf7ffe000 - 0xff7fe000   ( 120 MB)
Oct 14 09:23:44 pedro-laptop kernel: [    0.000000]     lowmem  : 0xc0000000 - 0xf77fe000   ( 887 MB)
Oct 14 09:23:44 pedro-laptop kernel: [    0.000000]       .init : 0xc0787000 - 0xc080e000   ( 540 kB)
Oct 14 09:23:44 pedro-laptop kernel: [    0.000000]       .data : 0xc0571384 - 0xc0786208   (2131 kB)
Oct 14 09:23:44 pedro-laptop kernel: [    0.000000]       .text : 0xc0100000 - 0xc0571384   (4548 kB)
Oct 14 09:23:44 pedro-laptop kernel: [    0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
Oct 14 09:23:44 pedro-laptop kernel: [    0.000000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
Oct 14 09:23:44 pedro-laptop kernel: [    0.000000] NR_IRQS:2304 nr_irqs:424
Oct 14 09:23:44 pedro-laptop kernel: [    0.000000] Fast TSC calibration using PIT
Oct 14 09:23:44 pedro-laptop kernel: [    0.000000] Detected 1595.864 MHz processor.
Oct 14 09:23:44 pedro-laptop kernel: [    0.000889] Console: colour VGA+ 80x25
Oct 14 09:23:44 pedro-laptop kernel: [    0.000893] console [tty0] enabled
Oct 14 09:23:44 pedro-laptop kernel: [    0.001108] hpet clockevent registered
Oct 14 09:23:44 pedro-laptop kernel: [    0.001114] HPET: 4 timers in total, 0 timers will be used for per-cpu timer
Oct 14 09:23:44 pedro-laptop kernel: [    0.004012] Calibrating delay loop (skipped), value calculated using timer frequency.. 3191.72 BogoMIPS (lpj=6383456)
Oct 14 09:23:44 pedro-laptop kernel: [    0.004037] Security Framework initialized
Oct 14 09:23:44 pedro-laptop kernel: [    0.004066] AppArmor: AppArmor initialized
Oct 14 09:23:44 pedro-laptop kernel: [    0.004076] Mount-cache hash table entries: 512
Oct 14 09:23:44 pedro-laptop kernel: [    0.004255] Initializing cgroup subsys ns
Oct 14 09:23:44 pedro-laptop kernel: [    0.004261] Initializing cgroup subsys cpuacct
Oct 14 09:23:44 pedro-laptop kernel: [    0.004267] Initializing cgroup subsys memory
Oct 14 09:23:44 pedro-laptop kernel: [    0.004275] Initializing cgroup subsys freezer
Oct 14 09:23:44 pedro-laptop kernel: [    0.004278] Initializing cgroup subsys net_cls
Oct 14 09:23:44 pedro-laptop kernel: [    0.004296] CPU: L1 I cache: 32K, L1 D cache: 32K
Oct 14 09:23:44 pedro-laptop kernel: [    0.004299] CPU: L2 cache: 1024K
Oct 14 09:23:44 pedro-laptop kernel: [    0.004302] CPU: Physical Processor ID: 0
Oct 14 09:23:44 pedro-laptop kernel: [    0.004304] CPU: Processor Core ID: 0
Oct 14 09:23:44 pedro-laptop kernel: [    0.004308] using mwait in idle threads.
Oct 14 09:23:44 pedro-laptop kernel: [    0.004318] Performance Counters: Core2 events, Intel PMU driver.
Oct 14 09:23:44 pedro-laptop kernel: [    0.004330] ... version:                 2
Oct 14 09:23:44 pedro-laptop kernel: [    0.004333] ... bit width:               40
Oct 14 09:23:44 pedro-laptop kernel: [    0.004335] ... generic counters:        2
Oct 14 09:23:44 pedro-laptop kernel: [    0.004337] ... value mask:              000000ffffffffff
Oct 14 09:23:44 pedro-laptop kernel: [    0.004339] ... max period:              000000007fffffff
Oct 14 09:23:44 pedro-laptop kernel: [    0.004342] ... fixed-purpose counters:  3
Oct 14 09:23:44 pedro-laptop kernel: [    0.004344] ... counter mask:            0000000700000003
Oct 14 09:23:44 pedro-laptop kernel: [    0.004349] Checking 'hlt' instruction... OK.
Oct 14 09:23:44 pedro-laptop kernel: [    0.023262] ACPI: Core revision 20090521
Oct 14 09:23:44 pedro-laptop kernel: [    0.044408] ..TIMER: vector=0x30 apic1=0 pin1=0 apic2=-1 pin2=-1
Oct 14 09:23:44 pedro-laptop kernel: [    0.048001] ..MP-BIOS bug: 8254 timer not connected to IO-APIC
Oct 14 09:23:44 pedro-laptop kernel: [    0.048001] ...trying to set up timer (IRQ0) through the 8259A ...
Oct 14 09:23:44 pedro-laptop kernel: [    0.048001] ..... (found apic 0 pin 0) ...
Oct 14 09:23:44 pedro-laptop kernel: [    0.088295] ....... works.
Oct 14 09:23:44 pedro-laptop kernel: [    0.088297] CPU0: Intel(R) Pentium(R) Dual  CPU  T2330  @ 1.60GHz stepping 0d
Oct 14 09:23:44 pedro-laptop kernel: [    0.092001] Booting processor 1 APIC 0x1 ip 0x6000
Oct 14 09:23:44 pedro-laptop kernel: [    0.004000] Initializing CPU#1
Oct 14 09:23:44 pedro-laptop kernel: [    0.004000] Calibrating delay using timer specific routine.. 3192.13 BogoMIPS (lpj=6384276)
Oct 14 09:23:44 pedro-laptop kernel: [    0.004000] CPU: L1 I cache: 32K, L1 D cache: 32K
Oct 14 09:23:44 pedro-laptop kernel: [    0.004000] CPU: L2 cache: 1024K
Oct 14 09:23:44 pedro-laptop kernel: [    0.004000] CPU: Physical Processor ID: 0
Oct 14 09:23:44 pedro-laptop kernel: [    0.004000] CPU: Processor Core ID: 1
Oct 14 09:23:44 pedro-laptop kernel: [    0.004000] x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106
Oct 14 09:23:44 pedro-laptop kernel: [    0.177999] CPU1: Intel(R) Pentium(R) Dual  CPU  T2330  @ 1.60GHz stepping 0d
Oct 14 09:23:44 pedro-laptop kernel: [    0.178016] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
Oct 14 09:23:44 pedro-laptop kernel: [    0.180028] Brought up 2 CPUs
Oct 14 09:23:44 pedro-laptop kernel: [    0.180031] Total of 2 processors activated (6383.86 BogoMIPS).
Oct 14 09:23:44 pedro-laptop kernel: [    0.180082] CPU0 attaching sched-domain:
Oct 14 09:23:44 pedro-laptop kernel: [    0.180085]  domain 0: span 0-1 level MC
Oct 14 09:23:44 pedro-laptop kernel: [    0.180089]   groups: 0 1
Oct 14 09:23:44 pedro-laptop kernel: [    0.180096] CPU1 attaching sched-domain:
Oct 14 09:23:44 pedro-laptop kernel: [    0.180098]  domain 0: span 0-1 level MC
Oct 14 09:23:44 pedro-laptop kernel: [    0.180101]   groups: 1 0
Oct 14 09:23:44 pedro-laptop kernel: [    0.180202] Booting paravirtualized kernel on bare hardware
Oct 14 09:23:44 pedro-laptop kernel: [    0.180259] regulator: core version 0.5
Oct 14 09:23:44 pedro-laptop kernel: [    0.180259] Time:  9:23:13  Date: 10/14/09
Oct 14 09:23:44 pedro-laptop kernel: [    0.180259] NET: Registered protocol family 16
Oct 14 09:23:44 pedro-laptop kernel: [    0.180266] EISA bus registered
Oct 14 09:23:44 pedro-laptop kernel: [    0.180279] ACPI: bus type pci registered
Oct 14 09:23:44 pedro-laptop kernel: [    0.180369] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 12
Oct 14 09:23:44 pedro-laptop kernel: [    0.180373] PCI: MCFG area at e0000000 reserved in E820
Oct 14 09:23:44 pedro-laptop kernel: [    0.180375] PCI: Using MMCONFIG for extended config space
Oct 14 09:23:44 pedro-laptop kernel: [    0.180378] PCI: Using configuration type 1 for base access
Oct 14 09:23:44 pedro-laptop kernel: [    0.184377] bio: create slab <bio-0> at 0
Oct 14 09:23:44 pedro-laptop kernel: [    0.185338] ACPI: EC: Look up EC in DSDT
Oct 14 09:23:44 pedro-laptop kernel: [    0.191436] ACPI: BIOS _OSI(Linux) query ignored
Oct 14 09:23:44 pedro-laptop kernel: [    0.196021] ACPI: EC: non-query interrupt received, switching to interrupt mode
Oct 14 09:23:44 pedro-laptop kernel: [    0.204207] ACPI: Interpreter enabled
Oct 14 09:23:44 pedro-laptop kernel: [    0.204216] ACPI: (supports S0 S3 S4 S5)
Oct 14 09:23:44 pedro-laptop kernel: [    0.204241] ACPI: Using IOAPIC for interrupt routing
Oct 14 09:23:44 pedro-laptop kernel: [    0.216778] [Firmware Bug]: ACPI: ACPI brightness control misses _BQC function
Oct 14 09:23:44 pedro-laptop kernel: [    0.220121] ACPI: EC: GPE = 0x1d, I/O: command/status = 0x66, data = 0x62
Oct 14 09:23:44 pedro-laptop kernel: [    0.220124] ACPI: EC: driver started in interrupt mode
Oct 14 09:23:44 pedro-laptop kernel: [    0.220204] ACPI: Power Resource [CTHT] (off)
Oct 14 09:23:44 pedro-laptop kernel: [    0.220464] ACPI: No dock devices found.
Oct 14 09:23:44 pedro-laptop kernel: [    0.221698] ACPI: PCI Root Bridge [PCI0] (0000:00)
Oct 14 09:23:44 pedro-laptop kernel: [    0.221886] pci 0000:00:04.0: PME# supported from D0 D3hot D3cold
Oct 14 09:23:44 pedro-laptop kernel: [    0.221891] pci 0000:00:04.0: PME# disabled
Oct 14 09:23:44 pedro-laptop kernel: [    0.221961] pci 0000:00:06.0: PME# supported from D0 D3hot D3cold
Oct 14 09:23:44 pedro-laptop kernel: [    0.221966] pci 0000:00:06.0: PME# disabled
Oct 14 09:23:44 pedro-laptop kernel: [    0.222034] pci 0000:00:07.0: PME# supported from D0 D3hot D3cold
Oct 14 09:23:44 pedro-laptop kernel: [    0.222039] pci 0000:00:07.0: PME# disabled
Oct 14 09:23:44 pedro-laptop kernel: [    0.222118] pci 0000:00:12.0: reg 10 io port: [0x8438-0x843f]
Oct 14 09:23:44 pedro-laptop kernel: [    0.222129] pci 0000:00:12.0: reg 14 io port: [0x8444-0x8447]
Oct 14 09:23:44 pedro-laptop kernel: [    0.222139] pci 0000:00:12.0: reg 18 io port: [0x8430-0x8437]
Oct 14 09:23:44 pedro-laptop kernel: [    0.222150] pci 0000:00:12.0: reg 1c io port: [0x8440-0x8443]
Oct 14 09:23:44 pedro-laptop kernel: [    0.222160] pci 0000:00:12.0: reg 20 io port: [0x8400-0x840f]
Oct 14 09:23:44 pedro-laptop kernel: [    0.222171] pci 0000:00:12.0: reg 24 32bit mmio: [0xf0209000-0xf02093ff]
Oct 14 09:23:44 pedro-laptop kernel: [    0.222198] pci 0000:00:12.0: set SATA to AHCI mode
Oct 14 09:23:44 pedro-laptop kernel: [    0.222257] pci 0000:00:13.0: reg 10 32bit mmio: [0xf0004000-0xf0004fff]
Oct 14 09:23:44 pedro-laptop kernel: [    0.222341] pci 0000:00:13.1: reg 10 32bit mmio: [0xf0005000-0xf0005fff]
Oct 14 09:23:44 pedro-laptop kernel: [    0.222426] pci 0000:00:13.2: reg 10 32bit mmio: [0xf0006000-0xf0006fff]
Oct 14 09:23:44 pedro-laptop kernel: [    0.222510] pci 0000:00:13.3: reg 10 32bit mmio: [0xf0007000-0xf0007fff]
Oct 14 09:23:44 pedro-laptop kernel: [    0.222594] pci 0000:00:13.4: reg 10 32bit mmio: [0xf0008000-0xf0008fff]
Oct 14 09:23:44 pedro-laptop kernel: [    0.222707] pci 0000:00:13.5: reg 10 32bit mmio: [0xf0209400-0xf02094ff]
Oct 14 09:23:44 pedro-laptop kernel: [    0.222788] pci 0000:00:13.5: supports D1 D2
Oct 14 09:23:44 pedro-laptop kernel: [    0.222791] pci 0000:00:13.5: PME# supported from D0 D1 D2 D3hot
Oct 14 09:23:44 pedro-laptop kernel: [    0.222797] pci 0000:00:13.5: PME# disabled
Oct 14 09:23:44 pedro-laptop kernel: [    0.222848] pci 0000:00:14.0: reg 10 io port: [0x8410-0x841f]
Oct 14 09:23:44 pedro-laptop kernel: [    0.222933] pci 0000:00:14.1: reg 10 io port: [0x1f0-0x1f7]
Oct 14 09:23:44 pedro-laptop kernel: [    0.222943] pci 0000:00:14.1: reg 14 io port: [0x3f4-0x3f7]
Oct 14 09:23:44 pedro-laptop kernel: [    0.222954] pci 0000:00:14.1: reg 18 io port: [0x00-0x07]
Oct 14 09:23:44 pedro-laptop kernel: [    0.222964] pci 0000:00:14.1: reg 1c io port: [0x00-0x03]
Oct 14 09:23:44 pedro-laptop kernel: [    0.222974] pci 0000:00:14.1: reg 20 io port: [0x8420-0x842f]
Oct 14 09:23:44 pedro-laptop kernel: [    0.223055] pci 0000:00:14.2: reg 10 64bit mmio: [0xf0000000-0xf0003fff]
Oct 14 09:23:44 pedro-laptop kernel: [    0.223122] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
Oct 14 09:23:44 pedro-laptop kernel: [    0.223128] pci 0000:00:14.2: PME# disabled
Oct 14 09:23:44 pedro-laptop kernel: [    0.223336] pci 0000:01:05.0: reg 10 64bit mmio: [0xd0000000-0xdfffffff]
Oct 14 09:23:44 pedro-laptop kernel: [    0.223347] pci 0000:01:05.0: reg 18 64bit mmio: [0xcfef0000-0xcfefffff]
Oct 14 09:23:44 pedro-laptop kernel: [    0.223354] pci 0000:01:05.0: reg 20 io port: [0x9000-0x90ff]
Oct 14 09:23:44 pedro-laptop kernel: [    0.223383] pci 0000:01:05.0: supports D1 D2
Oct 14 09:23:44 pedro-laptop kernel: [    0.223423] pci 0000:00:01.0: bridge io port: [0x9000-0x9fff]
Oct 14 09:23:44 pedro-laptop kernel: [    0.223428] pci 0000:00:01.0: bridge 32bit mmio: [0xcfe00000-0xcfefffff]
Oct 14 09:23:44 pedro-laptop kernel: [    0.223435] pci 0000:00:01.0: bridge 64bit mmio pref: [0xd0000000-0xdfffffff]
Oct 14 09:23:44 pedro-laptop kernel: [    0.224012] pci 0000:02:00.0: reg 10 64bit mmio: [0xf0400000-0xf0403fff]
Oct 14 09:23:44 pedro-laptop kernel: [    0.224022] pci 0000:02:00.0: reg 18 io port: [0xa000-0xa0ff]
Oct 14 09:23:44 pedro-laptop kernel: [    0.224099] pci 0000:02:00.0: supports D1 D2
Oct 14 09:23:44 pedro-laptop kernel: [    0.224101] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
Oct 14 09:23:44 pedro-laptop kernel: [    0.224108] pci 0000:02:00.0: PME# disabled
Oct 14 09:23:44 pedro-laptop kernel: [    0.224188] pci 0000:00:04.0: bridge io port: [0xa000-0xafff]
Oct 14 09:23:44 pedro-laptop kernel: [    0.224193] pci 0000:00:04.0: bridge 32bit mmio: [0xf0400000-0xf04fffff]
Oct 14 09:23:44 pedro-laptop kernel: [    0.224273] pci 0000:00:06.0: bridge io port: [0x00-0xfff]
Oct 14 09:23:44 pedro-laptop kernel: [    0.224278] pci 0000:00:06.0: bridge 32bit mmio: [0x000000-0x0fffff]
Oct 14 09:23:44 pedro-laptop kernel: [    0.224343] pci 0000:08:00.0: reg 10 64bit mmio: [0xf0300000-0xf030ffff]
Oct 14 09:23:44 pedro-laptop kernel: [    0.224512] pci 0000:00:07.0: bridge 32bit mmio: [0xf0300000-0xf03fffff]
Oct 14 09:23:44 pedro-laptop kernel: [    0.224602] pci 0000:00:14.4: transparent bridge
Oct 14 09:23:44 pedro-laptop kernel: [    0.224640] pci_bus 0000:00: on NUMA node 0
Oct 14 09:23:44 pedro-laptop kernel: [    0.224646] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
Oct 14 09:23:44 pedro-laptop kernel: [    0.224806] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PB4_._PRT]
Oct 14 09:23:44 pedro-laptop kernel: [    0.224911] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PB6_._PRT]
Oct 14 09:23:44 pedro-laptop kernel: [    0.225005] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PB7_._PRT]
Oct 14 09:23:44 pedro-laptop kernel: [    0.225150] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P_._PRT]
Oct 14 09:23:44 pedro-laptop kernel: [    0.225193] ACPI Warning: \_SB_.PCI0.P2P_._PRT: Return Package has no elements (empty) 20090521 nspredef-434
Oct 14 09:23:44 pedro-laptop kernel: [    0.225214] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT]
Oct 14 09:23:44 pedro-laptop kernel: [    0.229495] ACPI: PCI Interrupt Link [LNKA] (IRQs 10 11) *0, disabled.
Oct 14 09:23:44 pedro-laptop kernel: [    0.229646] ACPI: PCI Interrupt Link [LNKB] (IRQs 10 11) *0, disabled.
Oct 14 09:23:44 pedro-laptop kernel: [    0.229792] ACPI: PCI Interrupt Link [LNKC] (IRQs 10 11) *0, disabled.
Oct 14 09:23:44 pedro-laptop kernel: [    0.229939] ACPI: PCI Interrupt Link [LNKD] (IRQs 10 11) *0, disabled.
Oct 14 09:23:44 pedro-laptop kernel: [    0.230085] ACPI: PCI Interrupt Link [LNKE] (IRQs 10 11) *0, disabled.
Oct 14 09:23:44 pedro-laptop kernel: [    0.230231] ACPI: PCI Interrupt Link [LNKF] (IRQs 10 11) *0, disabled.
Oct 14 09:23:44 pedro-laptop kernel: [    0.230377] ACPI: PCI Interrupt Link [LNKG] (IRQs 10 11) *0, disabled.
Oct 14 09:23:44 pedro-laptop kernel: [    0.230522] ACPI: PCI Interrupt Link [LNKH] (IRQs 10 11) *0, disabled.
Oct 14 09:23:44 pedro-laptop kernel: [    0.230755] SCSI subsystem initialized
Oct 14 09:23:44 pedro-laptop kernel: [    0.230799] libata version 3.00 loaded.
Oct 14 09:23:44 pedro-laptop kernel: [    0.230799] usbcore: registered new interface driver usbfs
Oct 14 09:23:44 pedro-laptop kernel: [    0.230799] usbcore: registered new interface driver hub
Oct 14 09:23:44 pedro-laptop kernel: [    0.230799] usbcore: registered new device driver usb
Oct 14 09:23:44 pedro-laptop kernel: [    0.230799] ACPI: WMI: Mapper loaded
Oct 14 09:23:44 pedro-laptop kernel: [    0.230799] PCI: Using ACPI for IRQ routing
Oct 14 09:23:44 pedro-laptop kernel: [    0.230799] pci 0000:00:06.0: BAR 13: can't allocate resource
Oct 14 09:23:44 pedro-laptop kernel: [    0.230799] pci 0000:00:06.0: BAR 14: can't allocate resource
Oct 14 09:23:44 pedro-laptop kernel: [    0.240010] Bluetooth: Core ver 2.15
Oct 14 09:23:44 pedro-laptop kernel: [    0.240031] NET: Registered protocol family 31
Oct 14 09:23:44 pedro-laptop kernel: [    0.240031] Bluetooth: HCI device and connection manager initialized
Oct 14 09:23:44 pedro-laptop kernel: [    0.240031] Bluetooth: HCI socket layer initialized
Oct 14 09:23:44 pedro-laptop kernel: [    0.240031] NetLabel: Initializing
Oct 14 09:23:44 pedro-laptop kernel: [    0.240031] NetLabel:  domain hash size = 128
Oct 14 09:23:44 pedro-laptop kernel: [    0.240032] NetLabel:  protocols = UNLABELED CIPSOv4
Oct 14 09:23:44 pedro-laptop kernel: [    0.240048] NetLabel:  unlabeled traffic allowed by default
Oct 14 09:23:44 pedro-laptop kernel: [    0.240090] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
Oct 14 09:23:44 pedro-laptop kernel: [    0.240098] hpet0: 4 comparators, 32-bit 14.318180 MHz counter
Oct 14 09:23:44 pedro-laptop kernel: [    0.260016] pnp: PnP ACPI init
Oct 14 09:23:44 pedro-laptop kernel: [    0.260046] ACPI: bus type pnp registered
Oct 14 09:23:44 pedro-laptop kernel: [    0.264104] pnp: PnP ACPI: found 11 devices
Oct 14 09:23:44 pedro-laptop kernel: [    0.264108] ACPI: ACPI bus type pnp unregistered
Oct 14 09:23:44 pedro-laptop kernel: [    0.264113] PnPBIOS: Disabled by ACPI PNP
Oct 14 09:23:44 pedro-laptop kernel: [    0.264130] system 00:01: iomem range 0xfec00000-0xfec00fff could not be reserved
Oct 14 09:23:44 pedro-laptop kernel: [    0.264134] system 00:01: iomem range 0xfee00000-0xfee00fff has been reserved
Oct 14 09:23:44 pedro-laptop kernel: [    0.264145] system 00:08: ioport range 0x1080-0x1080 has been reserved
Oct 14 09:23:44 pedro-laptop kernel: [    0.264149] system 00:08: ioport range 0x220-0x22f has been reserved
Oct 14 09:23:44 pedro-laptop kernel: [    0.264153] system 00:08: ioport range 0x40b-0x40b has been reserved
Oct 14 09:23:44 pedro-laptop kernel: [    0.264156] system 00:08: ioport range 0x4d0-0x4d1 has been reserved
Oct 14 09:23:44 pedro-laptop kernel: [    0.264160] system 00:08: ioport range 0x4d6-0x4d6 has been reserved
Oct 14 09:23:44 pedro-laptop kernel: [    0.264163] system 00:08: ioport range 0x530-0x537 has been reserved
Oct 14 09:23:44 pedro-laptop kernel: [    0.264167] system 00:08: ioport range 0xc00-0xc01 has been reserved
Oct 14 09:23:44 pedro-laptop kernel: [    0.264170] system 00:08: ioport range 0xc14-0xc14 has been reserved
Oct 14 09:23:44 pedro-laptop kernel: [    0.264174] system 00:08: ioport range 0xc50-0xc52 has been reserved
Oct 14 09:23:44 pedro-laptop kernel: [    0.264177] system 00:08: ioport range 0xc6c-0xc6c has been reserved
Oct 14 09:23:44 pedro-laptop kernel: [    0.264181] system 00:08: ioport range 0xc6f-0xc6f has been reserved
Oct 14 09:23:44 pedro-laptop kernel: [    0.264184] system 00:08: ioport range 0xcd0-0xcd1 has been reserved
Oct 14 09:23:44 pedro-laptop kernel: [    0.264188] system 00:08: ioport range 0xcd2-0xcd3 has been reserved
Oct 14 09:23:44 pedro-laptop kernel: [    0.264191] system 00:08: ioport range 0xcd4-0xcd5 has been reserved
Oct 14 09:23:44 pedro-laptop kernel: [    0.264195] system 00:08: ioport range 0xcd6-0xcd7 has been reserved
Oct 14 09:23:44 pedro-laptop kernel: [    0.264199] system 00:08: ioport range 0xcd8-0xcdf has been reserved
Oct 14 09:23:44 pedro-laptop kernel: [    0.264202] system 00:08: ioport range 0x8000-0x805f has been reserved
Oct 14 09:23:44 pedro-laptop kernel: [    0.264206] system 00:08: ioport range 0x8210-0x821f has been reserved
Oct 14 09:23:44 pedro-laptop kernel: [    0.264209] system 00:08: ioport range 0xf40-0xf47 has been reserved
Oct 14 09:23:44 pedro-laptop kernel: [    0.264213] system 00:08: ioport range 0x280-0x293 has been reserved
Oct 14 09:23:44 pedro-laptop kernel: [    0.264217] system 00:08: ioport range 0x87f-0x87f has been reserved
Oct 14 09:23:44 pedro-laptop kernel: [    0.264224] system 00:09: iomem range 0xe0000-0xfffff could not be reserved
Oct 14 09:23:44 pedro-laptop kernel: [    0.264228] system 00:09: iomem range 0xfff00000-0xffffffff has been reserved
Oct 14 09:23:44 pedro-laptop kernel: [    0.264232] system 00:09: iomem range 0xffb83020-0xffb8401f has been reserved
Oct 14 09:23:44 pedro-laptop kernel: [    0.298964] AppArmor: AppArmor Filesystem Enabled
Oct 14 09:23:44 pedro-laptop kernel: [    0.299021] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
Oct 14 09:23:44 pedro-laptop kernel: [    0.299025] pci 0000:00:01.0:   IO window: 0x9000-0x9fff
Oct 14 09:23:44 pedro-laptop kernel: [    0.299031] pci 0000:00:01.0:   MEM window: 0xcfe00000-0xcfefffff
Oct 14 09:23:44 pedro-laptop kernel: [    0.299036] pci 0000:00:01.0:   PREFETCH window: 0x000000d0000000-0x000000dfffffff
Oct 14 09:23:44 pedro-laptop kernel: [    0.299043] pci 0000:00:04.0: PCI bridge, secondary bus 0000:02
Oct 14 09:23:44 pedro-laptop kernel: [    0.299046] pci 0000:00:04.0:   IO window: 0xa000-0xafff
Oct 14 09:23:44 pedro-laptop kernel: [    0.299052] pci 0000:00:04.0:   MEM window: 0xf0400000-0xf04fffff
Oct 14 09:23:44 pedro-laptop kernel: [    0.299056] pci 0000:00:04.0:   PREFETCH window: disabled
Oct 14 09:23:44 pedro-laptop kernel: [    0.299061] pci 0000:00:06.0: PCI bridge, secondary bus 0000:05
Oct 14 09:23:44 pedro-laptop kernel: [    0.299064] pci 0000:00:06.0:   IO window: disabled
Oct 14 09:23:44 pedro-laptop kernel: [    0.299069] pci 0000:00:06.0:   MEM window: disabled
Oct 14 09:23:44 pedro-laptop kernel: [    0.299073] pci 0000:00:06.0:   PREFETCH window: disabled
Oct 14 09:23:44 pedro-laptop kernel: [    0.299078] pci 0000:00:07.0: PCI bridge, secondary bus 0000:08
Oct 14 09:23:44 pedro-laptop kernel: [    0.299080] pci 0000:00:07.0:   IO window: disabled
Oct 14 09:23:44 pedro-laptop kernel: [    0.299086] pci 0000:00:07.0:   MEM window: 0xf0300000-0xf03fffff
Oct 14 09:23:44 pedro-laptop kernel: [    0.299090] pci 0000:00:07.0:   PREFETCH window: disabled
Oct 14 09:23:44 pedro-laptop kernel: [    0.299095] pci 0000:00:14.4: PCI bridge, secondary bus 0000:0b
Oct 14 09:23:44 pedro-laptop kernel: [    0.299097] pci 0000:00:14.4:   IO window: disabled
Oct 14 09:23:44 pedro-laptop kernel: [    0.299104] pci 0000:00:14.4:   MEM window: disabled
Oct 14 09:23:44 pedro-laptop kernel: [    0.299110] pci 0000:00:14.4:   PREFETCH window: disabled
Oct 14 09:23:44 pedro-laptop kernel: [    0.299132] pci 0000:00:04.0: setting latency timer to 64
Oct 14 09:23:44 pedro-laptop kernel: [    0.299142] pci 0000:00:06.0: setting latency timer to 64
Oct 14 09:23:44 pedro-laptop kernel: [    0.299151] pci 0000:00:07.0: setting latency timer to 64
Oct 14 09:23:44 pedro-laptop kernel: [    0.299163] pci_bus 0000:00: resource 0 io:  [0x00-0xffff]
Oct 14 09:23:44 pedro-laptop kernel: [    0.299167] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
Oct 14 09:23:44 pedro-laptop kernel: [    0.299170] pci_bus 0000:01: resource 0 io:  [0x9000-0x9fff]
Oct 14 09:23:44 pedro-laptop kernel: [    0.299173] pci_bus 0000:01: resource 1 mem: [0xcfe00000-0xcfefffff]
Oct 14 09:23:44 pedro-laptop kernel: [    0.299177] pci_bus 0000:01: resource 2 pref mem [0xd0000000-0xdfffffff]
Oct 14 09:23:44 pedro-laptop kernel: [    0.299180] pci_bus 0000:02: resource 0 io:  [0xa000-0xafff]
Oct 14 09:23:44 pedro-laptop kernel: [    0.299183] pci_bus 0000:02: resource 1 mem: [0xf0400000-0xf04fffff]
Oct 14 09:23:44 pedro-laptop kernel: [    0.299187] pci_bus 0000:05: resource 0 mem: [0x0-0xfff]
Oct 14 09:23:44 pedro-laptop kernel: [    0.299190] pci_bus 0000:05: resource 1 mem: [0x0-0xfffff]
Oct 14 09:23:44 pedro-laptop kernel: [    0.299193] pci_bus 0000:08: resource 1 mem: [0xf0300000-0xf03fffff]
Oct 14 09:23:44 pedro-laptop kernel: [    0.299197] pci_bus 0000:0b: resource 3 io:  [0x00-0xffff]
Oct 14 09:23:44 pedro-laptop kernel: [    0.299200] pci_bus 0000:0b: resource 4 mem: [0x000000-0xffffffff]
Oct 14 09:23:44 pedro-laptop kernel: [    0.299250] NET: Registered protocol family 2
Oct 14 09:23:44 pedro-laptop kernel: [    0.299378] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
Oct 14 09:23:44 pedro-laptop kernel: [    0.299822] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
Oct 14 09:23:44 pedro-laptop kernel: [    0.300524] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
Oct 14 09:23:44 pedro-laptop kernel: [    0.301022] TCP: Hash tables configured (established 131072 bind 65536)
Oct 14 09:23:44 pedro-laptop kernel: [    0.301025] TCP reno registered
Oct 14 09:23:44 pedro-laptop kernel: [    0.301202] NET: Registered protocol family 1
Oct 14 09:23:44 pedro-laptop kernel: [    0.301295] Trying to unpack rootfs image as initramfs...
Oct 14 09:23:44 pedro-laptop kernel: [    0.502075] Switched to high resolution mode on CPU 1
Oct 14 09:23:44 pedro-laptop kernel: [    0.504039] Switched to high resolution mode on CPU 0
Oct 14 09:23:44 pedro-laptop kernel: [    0.539775] Freeing initrd memory: 7493k freed
Oct 14 09:23:44 pedro-laptop kernel: [    0.547805] cpufreq-nforce2: No nForce2 chipset.
Oct 14 09:23:44 pedro-laptop kernel: [    0.547853] Scanning for low memory corruption every 60 seconds
Oct 14 09:23:44 pedro-laptop kernel: [    0.548052] audit: initializing netlink socket (disabled)
Oct 14 09:23:44 pedro-laptop kernel: [    0.548076] type=2000 audit(1255512191.545:1): initialized
Oct 14 09:23:44 pedro-laptop kernel: [    0.558782] highmem bounce pool size: 64 pages
Oct 14 09:23:44 pedro-laptop kernel: [    0.558789] HugeTLB registered 4 MB page size, pre-allocated 0 pages
Oct 14 09:23:44 pedro-laptop kernel: [    0.560637] VFS: Disk quotas dquot_6.5.2
Oct 14 09:23:44 pedro-laptop kernel: [    0.560715] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
Oct 14 09:23:44 pedro-laptop kernel: [    0.561400] fuse init (API version 7.12)
Oct 14 09:23:44 pedro-laptop kernel: [    0.561504] msgmni has been set to 1699
Oct 14 09:23:44 pedro-laptop kernel: [    0.561761] alg: No test for stdrng (krng)
Oct 14 09:23:44 pedro-laptop kernel: [    0.561780] io scheduler noop registered
Oct 14 09:23:44 pedro-laptop kernel: [    0.561783] io scheduler anticipatory registered
Oct 14 09:23:44 pedro-laptop kernel: [    0.561785] io scheduler deadline registered
Oct 14 09:23:44 pedro-laptop kernel: [    0.561839] io scheduler cfq registered (default)
Oct 14 09:23:44 pedro-laptop kernel: [    0.561932] pci 0000:01:05.0: Boot video device
Oct 14 09:23:44 pedro-laptop kernel: [    0.562098]   alloc irq_desc for 24 on node -1
Oct 14 09:23:44 pedro-laptop kernel: [    0.562101]   alloc kstat_irqs on node -1
Oct 14 09:23:44 pedro-laptop kernel: [    0.562114] pcieport-driver 0000:00:04.0: irq 24 for MSI/MSI-X
Oct 14 09:23:44 pedro-laptop kernel: [    0.562124] pcieport-driver 0000:00:04.0: setting latency timer to 64
Oct 14 09:23:44 pedro-laptop kernel: [    0.562260]   alloc irq_desc for 25 on node -1
Oct 14 09:23:44 pedro-laptop kernel: [    0.562263]   alloc kstat_irqs on node -1
Oct 14 09:23:44 pedro-laptop kernel: [    0.562271] pcieport-driver 0000:00:06.0: irq 25 for MSI/MSI-X
Oct 14 09:23:44 pedro-laptop kernel: [    0.562280] pcieport-driver 0000:00:06.0: setting latency timer to 64
Oct 14 09:23:44 pedro-laptop kernel: [    0.562413]   alloc irq_desc for 26 on node -1
Oct 14 09:23:44 pedro-laptop kernel: [    0.562416]   alloc kstat_irqs on node -1
Oct 14 09:23:44 pedro-laptop kernel: [    0.562423] pcieport-driver 0000:00:07.0: irq 26 for MSI/MSI-X
Oct 14 09:23:44 pedro-laptop kernel: [    0.562432] pcieport-driver 0000:00:07.0: setting latency timer to 64
Oct 14 09:23:44 pedro-laptop kernel: [    0.562527] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
Oct 14 09:23:44 pedro-laptop kernel: [    0.562558] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
Oct 14 09:23:44 pedro-laptop kernel: [    0.563974] ACPI: AC Adapter [AC] (on-line)
Oct 14 09:23:44 pedro-laptop kernel: [    0.564106] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
Oct 14 09:23:44 pedro-laptop kernel: [    0.564111] ACPI: Power Button [PWRF]
Oct 14 09:23:44 pedro-laptop kernel: [    0.564179] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input1
Oct 14 09:23:44 pedro-laptop kernel: [    0.564182] ACPI: Sleep Button [SLPB]
Oct 14 09:23:44 pedro-laptop kernel: [    0.564239] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input2
Oct 14 09:23:44 pedro-laptop kernel: [    0.564290] ACPI: Lid Switch [LID0]
Oct 14 09:23:44 pedro-laptop kernel: [    0.564344] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input3
Oct 14 09:23:44 pedro-laptop kernel: [    0.564350] ACPI: Power Button [PWRB]
Oct 14 09:23:44 pedro-laptop kernel: [    0.565375] fan PNP0C0B:00: registered as cooling_device0
Oct 14 09:23:44 pedro-laptop kernel: [    0.565383] ACPI: Fan [FAN0] (off)
Oct 14 09:23:44 pedro-laptop kernel: [    0.566314] ACPI: SSDT 8fe8baf3 00261 (v01  PmRef  Cpu0Ist 00003000 INTL 20050228)
Oct 14 09:23:44 pedro-laptop kernel: [    0.567542] ACPI: SSDT 8fe8b556 00518 (v01  PmRef  Cpu0Cst 00003001 INTL 20050228)
Oct 14 09:23:44 pedro-laptop kernel: [    0.570243] Monitor-Mwait will be used to enter C-1 state
Oct 14 09:23:44 pedro-laptop kernel: [    0.570283] Monitor-Mwait will be used to enter C-2 state
Oct 14 09:23:44 pedro-laptop kernel: [    0.570294] Marking TSC unstable due to TSC halts in idle
Oct 14 09:23:44 pedro-laptop kernel: [    0.570314] ACPI: CPU0 (power states: C1[C1] C2[C2])
Oct 14 09:23:44 pedro-laptop kernel: [    0.570339] processor LNXCPU:00: registered as cooling_device1
Oct 14 09:23:44 pedro-laptop kernel: [    0.570344] ACPI: Processor [CPU0] (supports 8 throttling states)
Oct 14 09:23:44 pedro-laptop kernel: [    0.571003] ACPI: SSDT 8fe8bd54 001F2 (v01  PmRef  Cpu1Ist 00003000 INTL 20050228)
Oct 14 09:23:44 pedro-laptop kernel: [    0.571601] ACPI: SSDT 8fe8ba6e 00085 (v01  PmRef  Cpu1Cst 00003000 INTL 20050228)
Oct 14 09:23:44 pedro-laptop kernel: [    0.572583] ACPI: CPU1 (power states: C1[C1] C2[C2])
Oct 14 09:23:44 pedro-laptop kernel: [    0.572615] processor LNXCPU:01: registered as cooling_device2
Oct 14 09:23:44 pedro-laptop kernel: [    0.572620] ACPI: Processor [CPU1] (supports 8 throttling states)
Oct 14 09:23:44 pedro-laptop kernel: [    0.580739] thermal LNXTHERM:01: registered as thermal_zone0
Oct 14 09:23:44 pedro-laptop kernel: [    0.580750] ACPI: Thermal Zone [TZ1] (40 C)
Oct 14 09:23:44 pedro-laptop kernel: [    0.580828] isapnp: Scanning for PnP cards...
Oct 14 09:23:44 pedro-laptop kernel: [    0.637623] ACPI: Battery Slot [CMB0] (battery present)
Oct 14 09:23:44 pedro-laptop kernel: [    0.935008] isapnp: No Plug & Play device found
Oct 14 09:23:44 pedro-laptop kernel: [    0.936597] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
Oct 14 09:23:44 pedro-laptop kernel: [    0.938245] brd: module loaded
Oct 14 09:23:44 pedro-laptop kernel: [    0.938804] loop: module loaded
Oct 14 09:23:44 pedro-laptop kernel: [    0.938899] input: Macintosh mouse button emulation as /devices/virtual/input/input4
Oct 14 09:23:44 pedro-laptop kernel: [    0.938992] ahci 0000:00:12.0: version 3.0
Oct 14 09:23:44 pedro-laptop kernel: [    0.939012]   alloc irq_desc for 22 on node -1
Oct 14 09:23:44 pedro-laptop kernel: [    0.939015]   alloc kstat_irqs on node -1
Oct 14 09:23:44 pedro-laptop kernel: [    0.939023] ahci 0000:00:12.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
Oct 14 09:23:44 pedro-laptop kernel: [    0.939156] ahci 0000:00:12.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode
Oct 14 09:23:44 pedro-laptop kernel: [    0.939161] ahci 0000:00:12.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part 
Oct 14 09:23:44 pedro-laptop kernel: [    0.939637] scsi0 : ahci
Oct 14 09:23:44 pedro-laptop kernel: [    0.939790] scsi1 : ahci
Oct 14 09:23:44 pedro-laptop kernel: [    0.939866] scsi2 : ahci
Oct 14 09:23:44 pedro-laptop kernel: [    0.939937] scsi3 : ahci
Oct 14 09:23:44 pedro-laptop kernel: [    0.940097] ata1: SATA max UDMA/133 abar m1024@0xf0209000 port 0xf0209100 irq 22
Oct 14 09:23:44 pedro-laptop kernel: [    0.940102] ata2: SATA max UDMA/133 abar m1024@0xf0209000 port 0xf0209180 irq 22
Oct 14 09:23:44 pedro-laptop kernel: [    0.940107] ata3: SATA max UDMA/133 abar m1024@0xf0209000 port 0xf0209200 irq 22
Oct 14 09:23:44 pedro-laptop kernel: [    0.940111] ata4: SATA max UDMA/133 abar m1024@0xf0209000 port 0xf0209280 irq 22
Oct 14 09:23:44 pedro-laptop kernel: [    0.940472]   alloc irq_desc for 16 on node -1
Oct 14 09:23:44 pedro-laptop kernel: [    0.940475]   alloc kstat_irqs on node -1
Oct 14 09:23:44 pedro-laptop kernel: [    0.940483] pata_atiixp 0000:00:14.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
Oct 14 09:23:44 pedro-laptop kernel: [    0.940531] pata_atiixp 0000:00:14.1: setting latency timer to 64
Oct 14 09:23:44 pedro-laptop kernel: [    0.940628] scsi4 : pata_atiixp
Oct 14 09:23:44 pedro-laptop kernel: [    0.940711] scsi5 : pata_atiixp
Oct 14 09:23:44 pedro-laptop kernel: [    0.941659] ata5: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x8420 irq 14
Oct 14 09:23:44 pedro-laptop kernel: [    0.941663] ata6: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x8428 irq 15
Oct 14 09:23:44 pedro-laptop kernel: [    0.942534] Fixed MDIO Bus: probed
Oct 14 09:23:44 pedro-laptop kernel: [    0.942577] PPP generic driver version 2.4.2
Oct 14 09:23:44 pedro-laptop kernel: [    0.942724] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
Oct 14 09:23:44 pedro-laptop kernel: [    0.942751]   alloc irq_desc for 19 on node -1
Oct 14 09:23:44 pedro-laptop kernel: [    0.942754]   alloc kstat_irqs on node -1
Oct 14 09:23:44 pedro-laptop kernel: [    0.942764] ehci_hcd 0000:00:13.5: PCI INT D -> GSI 19 (level, low) -> IRQ 19
Oct 14 09:23:44 pedro-laptop kernel: [    0.942790] ehci_hcd 0000:00:13.5: EHCI Host Controller
Oct 14 09:23:44 pedro-laptop kernel: [    0.942862] ehci_hcd 0000:00:13.5: new USB bus registered, assigned bus number 1
Oct 14 09:23:44 pedro-laptop kernel: [    0.942895] ehci_hcd 0000:00:13.5: applying AMD SB600/SB700 USB freeze workaround
Oct 14 09:23:44 pedro-laptop kernel: [    0.942920] ehci_hcd 0000:00:13.5: debug port 1
Oct 14 09:23:44 pedro-laptop kernel: [    0.942941] ehci_hcd 0000:00:13.5: irq 19, io mem 0xf0209400
Oct 14 09:23:44 pedro-laptop kernel: [    0.952020] ehci_hcd 0000:00:13.5: USB 2.0 started, EHCI 1.00
Oct 14 09:23:44 pedro-laptop kernel: [    0.952133] usb usb1: configuration #1 chosen from 1 choice
Oct 14 09:23:44 pedro-laptop kernel: [    0.952175] hub 1-0:1.0: USB hub found
Oct 14 09:23:44 pedro-laptop kernel: [    0.952187] hub 1-0:1.0: 10 ports detected
Oct 14 09:23:44 pedro-laptop kernel: [    0.952283] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
Oct 14 09:23:44 pedro-laptop kernel: [    0.952306] ohci_hcd 0000:00:13.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
Oct 14 09:23:44 pedro-laptop kernel: [    0.952322] ohci_hcd 0000:00:13.0: OHCI Host Controller
Oct 14 09:23:44 pedro-laptop kernel: [    0.952373] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 2
Oct 14 09:23:44 pedro-laptop kernel: [    0.952402] ohci_hcd 0000:00:13.0: irq 16, io mem 0xf0004000
Oct 14 09:23:44 pedro-laptop kernel: [    1.008121] usb usb2: configuration #1 chosen from 1 choice
Oct 14 09:23:44 pedro-laptop kernel: [    1.008159] hub 2-0:1.0: USB hub found
Oct 14 09:23:44 pedro-laptop kernel: [    1.008172] hub 2-0:1.0: 2 ports detected
Oct 14 09:23:44 pedro-laptop kernel: [    1.008234]   alloc irq_desc for 17 on node -1
Oct 14 09:23:44 pedro-laptop kernel: [    1.008237]   alloc kstat_irqs on node -1
Oct 14 09:23:44 pedro-laptop kernel: [    1.008244] ohci_hcd 0000:00:13.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
Oct 14 09:23:44 pedro-laptop kernel: [    1.008257] ohci_hcd 0000:00:13.1: OHCI Host Controller
Oct 14 09:23:44 pedro-laptop kernel: [    1.008297] ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 3
Oct 14 09:23:44 pedro-laptop kernel: [    1.008325] ohci_hcd 0000:00:13.1: irq 17, io mem 0xf0005000
Oct 14 09:23:44 pedro-laptop kernel: [    1.064115] usb usb3: configuration #1 chosen from 1 choice
Oct 14 09:23:44 pedro-laptop kernel: [    1.064148] hub 3-0:1.0: USB hub found
Oct 14 09:23:44 pedro-laptop kernel: [    1.064161] hub 3-0:1.0: 2 ports detected
Oct 14 09:23:44 pedro-laptop kernel: [    1.064219]   alloc irq_desc for 18 on node -1
Oct 14 09:23:44 pedro-laptop kernel: [    1.064221]   alloc kstat_irqs on node -1
Oct 14 09:23:44 pedro-laptop kernel: [    1.064228] ohci_hcd 0000:00:13.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
Oct 14 09:23:44 pedro-laptop kernel: [    1.064240] ohci_hcd 0000:00:13.2: OHCI Host Controller
Oct 14 09:23:44 pedro-laptop kernel: [    1.064279] ohci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 4
Oct 14 09:23:44 pedro-laptop kernel: [    1.064304] ohci_hcd 0000:00:13.2: irq 18, io mem 0xf0006000
Oct 14 09:23:44 pedro-laptop kernel: [    1.104526] ata5.00: ATAPI: HL-DT-ST DVDRAM GSA-T20N, WH01, max UDMA/33
Oct 14 09:23:44 pedro-laptop kernel: [    1.120119] usb usb4: configuration #1 chosen from 1 choice
Oct 14 09:23:44 pedro-laptop kernel: [    1.120153] hub 4-0:1.0: USB hub found
Oct 14 09:23:44 pedro-laptop kernel: [    1.120165] hub 4-0:1.0: 2 ports detected
Oct 14 09:23:44 pedro-laptop kernel: [    1.120225] ohci_hcd 0000:00:13.3: PCI INT B -> GSI 17 (level, low) -> IRQ 17
Oct 14 09:23:44 pedro-laptop kernel: [    1.120238] ohci_hcd 0000:00:13.3: OHCI Host Controller
Oct 14 09:23:44 pedro-laptop kernel: [    1.120277] ohci_hcd 0000:00:13.3: new USB bus registered, assigned bus number 5
Oct 14 09:23:44 pedro-laptop kernel: [    1.120295] ohci_hcd 0000:00:13.3: irq 17, io mem 0xf0007000
Oct 14 09:23:44 pedro-laptop kernel: [    1.120778] ata5.00: configured for UDMA/33
Oct 14 09:23:44 pedro-laptop kernel: [    1.176135] usb usb5: configuration #1 chosen from 1 choice
Oct 14 09:23:44 pedro-laptop kernel: [    1.176168] hub 5-0:1.0: USB hub found
Oct 14 09:23:44 pedro-laptop kernel: [    1.176179] hub 5-0:1.0: 2 ports detected
Oct 14 09:23:44 pedro-laptop kernel: [    1.176248] ohci_hcd 0000:00:13.4: PCI INT C -> GSI 18 (level, low) -> IRQ 18
Oct 14 09:23:44 pedro-laptop kernel: [    1.176262] ohci_hcd 0000:00:13.4: OHCI Host Controller
Oct 14 09:23:44 pedro-laptop kernel: [    1.176301] ohci_hcd 0000:00:13.4: new USB bus registered, assigned bus number 6
Oct 14 09:23:44 pedro-laptop kernel: [    1.176319] ohci_hcd 0000:00:13.4: irq 18, io mem 0xf0008000
Oct 14 09:23:44 pedro-laptop kernel: [    1.232118] usb usb6: configuration #1 chosen from 1 choice
Oct 14 09:23:44 pedro-laptop kernel: [    1.232150] hub 6-0:1.0: USB hub found
Oct 14 09:23:44 pedro-laptop kernel: [    1.232167] hub 6-0:1.0: 2 ports detected
Oct 14 09:23:44 pedro-laptop kernel: [    1.232232] uhci_hcd: USB Universal Host Controller Interface driver
Oct 14 09:23:44 pedro-laptop kernel: [    1.232350] PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSE0] at 0x60,0x64 irq 1,12
Oct 14 09:23:44 pedro-laptop kernel: [    1.236546] i8042.c: Detected active multiplexing controller, rev 1.1.
Oct 14 09:23:44 pedro-laptop kernel: [    1.238016] serio: i8042 KBD port at 0x60,0x64 irq 1
Oct 14 09:23:44 pedro-laptop kernel: [    1.238023] serio: i8042 AUX0 port at 0x60,0x64 irq 12
Oct 14 09:23:44 pedro-laptop kernel: [    1.238027] serio: i8042 AUX1 port at 0x60,0x64 irq 12
Oct 14 09:23:44 pedro-laptop kernel: [    1.238031] serio: i8042 AUX2 port at 0x60,0x64 irq 12
Oct 14 09:23:44 pedro-laptop kernel: [    1.238034] serio: i8042 AUX3 port at 0x60,0x64 irq 12
Oct 14 09:23:44 pedro-laptop kernel: [    1.238111] mice: PS/2 mouse device common for all mice
Oct 14 09:23:44 pedro-laptop kernel: [    1.238281] rtc_cmos 00:04: RTC can wake from S4
Oct 14 09:23:44 pedro-laptop kernel: [    1.238330] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
Oct 14 09:23:44 pedro-laptop kernel: [    1.238360] rtc0: alarms up to one month, 114 bytes nvram, hpet irqs
Oct 14 09:23:44 pedro-laptop kernel: [    1.238501] device-mapper: uevent: version 1.0.3
Oct 14 09:23:44 pedro-laptop kernel: [    1.238628] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com
Oct 14 09:23:44 pedro-laptop kernel: [    1.238747] device-mapper: multipath: version 1.1.0 loaded
Oct 14 09:23:44 pedro-laptop kernel: [    1.238751] device-mapper: multipath round-robin: version 1.0.0 loaded
Oct 14 09:23:44 pedro-laptop kernel: [    1.238903] EISA: Probing bus 0 at eisa.0
Oct 14 09:23:44 pedro-laptop kernel: [    1.238911] Cannot allocate resource for EISA slot 1
Oct 14 09:23:44 pedro-laptop kernel: [    1.238941] Cannot allocate resource for EISA slot 8
Oct 14 09:23:44 pedro-laptop kernel: [    1.238944] EISA: Detected 0 cards.
Oct 14 09:23:44 pedro-laptop kernel: [    1.239147] cpuidle: using governor ladder
Oct 14 09:23:44 pedro-laptop kernel: [    1.239265] cpuidle: using governor menu
Oct 14 09:23:44 pedro-laptop kernel: [    1.239904] TCP cubic registered
Oct 14 09:23:44 pedro-laptop kernel: [    1.240120] NET: Registered protocol family 10
Oct 14 09:23:44 pedro-laptop kernel: [    1.240702] lo: Disabled Privacy Extensions
Oct 14 09:23:44 pedro-laptop kernel: [    1.241141] NET: Registered protocol family 17
Oct 14 09:23:44 pedro-laptop kernel: [    1.241165] Bluetooth: L2CAP ver 2.13
Oct 14 09:23:44 pedro-laptop kernel: [    1.241168] Bluetooth: L2CAP socket layer initialized
Oct 14 09:23:44 pedro-laptop kernel: [    1.241171] Bluetooth: SCO (Voice Link) ver 0.6
Oct 14 09:23:44 pedro-laptop kernel: [    1.241174] Bluetooth: SCO socket layer initialized
Oct 14 09:23:44 pedro-laptop kernel: [    1.241226] Bluetooth: RFCOMM TTY layer initialized
Oct 14 09:23:44 pedro-laptop kernel: [    1.241230] Bluetooth: RFCOMM socket layer initialized
Oct 14 09:23:44 pedro-laptop kernel: [    1.241232] Bluetooth: RFCOMM ver 1.11
Oct 14 09:23:44 pedro-laptop kernel: [    1.241773] Using IPI No-Shortcut mode
Oct 14 09:23:44 pedro-laptop kernel: [    1.241862] PM: Resume from disk failed.
Oct 14 09:23:44 pedro-laptop kernel: [    1.241879] registered taskstats version 1
Oct 14 09:23:44 pedro-laptop kernel: [    1.242017]   Magic number: 13:850:373
Oct 14 09:23:44 pedro-laptop kernel: [    1.242059] vc vcsa1: hash matches
Oct 14 09:23:44 pedro-laptop kernel: [    1.242134] rtc_cmos 00:04: setting system clock to 2009-10-14 09:23:14 UTC (1255512194)
Oct 14 09:23:44 pedro-laptop kernel: [    1.242138] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
Oct 14 09:23:44 pedro-laptop kernel: [    1.242140] EDD information not available.
Oct 14 09:23:44 pedro-laptop kernel: [    1.245936] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input5
Oct 14 09:23:44 pedro-laptop kernel: [    1.260061] ata4: SATA link down (SStatus 0 SControl 300)
Oct 14 09:23:44 pedro-laptop kernel: [    1.260093] ata2: SATA link down (SStatus 0 SControl 300)
Oct 14 09:23:44 pedro-laptop kernel: [    1.260121] ata3: SATA link down (SStatus 0 SControl 300)
Oct 14 09:23:44 pedro-laptop kernel: [    1.265037] usb 1-9: new high speed USB device using ehci_hcd and address 2
Oct 14 09:23:44 pedro-laptop kernel: [    1.424023] ata1: softreset failed (device not ready)
Oct 14 09:23:44 pedro-laptop kernel: [    1.424027] ata1: applying SB600 PMP SRST workaround and retrying
Oct 14 09:23:44 pedro-laptop kernel: [    1.501237] usb 1-9: configuration #1 chosen from 1 choice
Oct 14 09:23:44 pedro-laptop kernel: [    1.588052] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
Oct 14 09:23:44 pedro-laptop kernel: [    1.588568] ata1.00: ATA-8: FUJITSU MHW2120BH, 00000012, max UDMA/100
Oct 14 09:23:44 pedro-laptop kernel: [    1.588572] ata1.00: 234441648 sectors, multi 16: LBA48 NCQ (depth 31/32)
Oct 14 09:23:44 pedro-laptop kernel: [    1.588600] ata1.00: SB600 AHCI: limiting to 255 sectors per cmd
Oct 14 09:23:44 pedro-laptop kernel: [    1.589262] ata1.00: SB600 AHCI: limiting to 255 sectors per cmd
Oct 14 09:23:44 pedro-laptop kernel: [    1.589266] ata1.00: configured for UDMA/100
Oct 14 09:23:44 pedro-laptop kernel: [    1.604189] scsi 0:0:0:0: Direct-Access     ATA      FUJITSU MHW2120B 0000 PQ: 0 ANSI: 5
Oct 14 09:23:44 pedro-laptop kernel: [    1.604349] sd 0:0:0:0: Attached scsi generic sg0 type 0
Oct 14 09:23:44 pedro-laptop kernel: [    1.604400] sd 0:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/111 GiB)
Oct 14 09:23:44 pedro-laptop kernel: [    1.604456] sd 0:0:0:0: [sda] Write Protect is off
Oct 14 09:23:44 pedro-laptop kernel: [    1.604459] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
Oct 14 09:23:44 pedro-laptop kernel: [    1.604487] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Oct 14 09:23:44 pedro-laptop kernel: [    1.604650]  sda:
Oct 14 09:23:44 pedro-laptop kernel: [    1.608261] scsi 4:0:0:0: CD-ROM            HL-DT-ST DVDRAM GSA-T20N  WH01 PQ: 0 ANSI: 5
Oct 14 09:23:44 pedro-laptop kernel: [    1.619191] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
Oct 14 09:23:44 pedro-laptop kernel: [    1.619196] Uniform CD-ROM driver Revision: 3.20
Oct 14 09:23:44 pedro-laptop kernel: [    1.619306] sr 4:0:0:0: Attached scsi CD-ROM sr0
Oct 14 09:23:44 pedro-laptop kernel: [    1.619356] sr 4:0:0:0: Attached scsi generic sg1 type 5
Oct 14 09:23:44 pedro-laptop kernel: [    1.634807]  sda1 sda2 sda3 sda4 < sda5 sda6 sda7 >
Oct 14 09:23:44 pedro-laptop kernel: [    1.672556] sd 0:0:0:0: [sda] Attached SCSI disk
Oct 14 09:23:44 pedro-laptop kernel: [    1.772146] Freeing unused kernel memory: 540k freed
Oct 14 09:23:44 pedro-laptop kernel: [    1.772620] Write protecting the kernel text: 4552k
Oct 14 09:23:44 pedro-laptop kernel: [    1.772682] Write protecting the kernel read-only data: 1832k
Oct 14 09:23:44 pedro-laptop kernel: [    1.965242] Linux agpgart interface v0.103
Oct 14 09:23:44 pedro-laptop kernel: [    1.970290] [Firmware Bug]: ACPI: ACPI brightness control misses _BQC function
Oct 14 09:23:44 pedro-laptop kernel: [    1.971648] acpi device:21: registered as cooling_device3
Oct 14 09:23:44 pedro-laptop kernel: [    1.984113] sky2 driver version 1.23
Oct 14 09:23:44 pedro-laptop kernel: [    1.984177] sky2 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
Oct 14 09:23:44 pedro-laptop kernel: [    1.984195] sky2 0000:02:00.0: setting latency timer to 64
Oct 14 09:23:44 pedro-laptop kernel: [    1.984230] sky2 0000:02:00.0: Yukon-2 FE chip revision 3
Oct 14 09:23:44 pedro-laptop kernel: [    1.984327]   alloc irq_desc for 27 on node -1
Oct 14 09:23:44 pedro-laptop kernel: [    1.984330]   alloc kstat_irqs on node -1
Oct 14 09:23:44 pedro-laptop kernel: [    1.984348] sky2 0000:02:00.0: irq 27 for MSI/MSI-X
Oct 14 09:23:44 pedro-laptop kernel: [    1.985732] sky2 eth0: addr 00:e0:91:15:a0:3f
Oct 14 09:23:44 pedro-laptop kernel: [    1.986703] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:1e/device:1f/input/input6
Oct 14 09:23:44 pedro-laptop kernel: [    1.986757] ACPI: Video Device [VGA] (multi-head: yes  rom: yes  post: no)
Oct 14 09:23:44 pedro-laptop kernel: [    2.054723] [drm] Initialized drm 1.1.0 20060810
Oct 14 09:23:44 pedro-laptop kernel: [    2.076903] [drm] radeon default to kernel modesetting DISABLED.
Oct 14 09:23:44 pedro-laptop kernel: [    2.077800] pci 0000:01:05.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
Oct 14 09:23:44 pedro-laptop kernel: [    2.077973] [drm] Initialized radeon 1.31.0 20080528 for 0000:01:05.0 on minor 0
Oct 14 09:23:44 pedro-laptop kernel: [    3.274884] PM: Starting manual resume from disk
Oct 14 09:23:44 pedro-laptop kernel: [    3.274889] PM: Resume from partition 8:7
Oct 14 09:23:44 pedro-laptop kernel: [    3.274892] PM: Checking hibernation image.
Oct 14 09:23:44 pedro-laptop kernel: [    3.275095] PM: Resume from disk failed.
Oct 14 09:23:44 pedro-laptop kernel: [    3.278759] EXT3-fs: INFO: recovery required on readonly filesystem.
Oct 14 09:23:44 pedro-laptop kernel: [    3.278763] EXT3-fs: write access will be enabled during recovery.
Oct 14 09:23:44 pedro-laptop kernel: [    9.509980] kjournald starting.  Commit interval 5 seconds
Oct 14 09:23:44 pedro-laptop kernel: [    9.510006] EXT3-fs: recovery complete.
Oct 14 09:23:44 pedro-laptop kernel: [    9.510669] EXT3-fs: mounted filesystem with writeback data mode.
Oct 14 09:23:44 pedro-laptop kernel: [   10.850009] type=1505 audit(1255512204.105:2): operation="profile_load" pid=423 name=/usr/share/gdm/guest-session/Xsession
Oct 14 09:23:44 pedro-laptop kernel: [   10.865733] type=1505 audit(1255512204.121:3): operation="profile_load" pid=424 name=/sbin/dhclient3
Oct 14 09:23:44 pedro-laptop kernel: [   10.866652] type=1505 audit(1255512204.121:4): operation="profile_load" pid=424 name=/usr/lib/NetworkManager/nm-dhcp-client.action
Oct 14 09:23:44 pedro-laptop kernel: [   10.867153] type=1505 audit(1255512204.121:5): operation="profile_load" pid=424 name=/usr/lib/connman/scripts/dhclient-script
Oct 14 09:23:44 pedro-laptop kernel: [   10.915539] type=1505 audit(1255512204.169:6): operation="profile_load" pid=425 name=/usr/bin/evince
Oct 14 09:23:44 pedro-laptop kernel: [   10.928244] type=1505 audit(1255512204.185:7): operation="profile_load" pid=425 name=/usr/bin/evince-previewer
Oct 14 09:23:44 pedro-laptop kernel: [   10.935717] type=1505 audit(1255512204.189:8): operation="profile_load" pid=425 name=/usr/bin/evince-thumbnailer
Oct 14 09:23:44 pedro-laptop kernel: [   10.969371] type=1505 audit(1255512204.225:9): operation="profile_load" pid=427 name=/usr/lib/cups/backend/cups-pdf
Oct 14 09:23:44 pedro-laptop kernel: [   10.970444] type=1505 audit(1255512204.225:10): operation="profile_load" pid=427 name=/usr/sbin/cupsd
Oct 14 09:23:44 pedro-laptop kernel: [   11.121392] type=1505 audit(1255512204.377:11): operation="profile_load" pid=428 name=/usr/sbin/ntpd
Oct 14 09:23:44 pedro-laptop kernel: [   12.495241] Adding 1502004k swap on /dev/sda7.  Priority:-1 extents:1 across:1502004k 
Oct 14 09:23:44 pedro-laptop kernel: [   13.313303] EXT3 FS on sda5, internal journal
Oct 14 09:23:44 pedro-laptop kernel: [   13.472041] udev: starting version 147
Oct 14 09:23:44 pedro-laptop kernel: [   17.612458] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
Oct 14 09:23:44 pedro-laptop kernel: [   17.613512] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0x8410, revision 0
Oct 14 09:23:44 pedro-laptop kernel: [   17.660973] lp: driver loaded but no devices found
Oct 14 09:23:44 pedro-laptop kernel: [   17.668110] cfg80211: Calling CRDA to update world regulatory domain
Oct 14 09:23:44 pedro-laptop kernel: [   17.957680] ip_tables: (C) 2000-2006 Netfilter Core Team
Oct 14 09:23:44 pedro-laptop kernel: [   18.060973] Linux video capture interface: v2.00
Oct 14 09:23:44 pedro-laptop kernel: [   19.525298] uvcvideo: Found UVC 1.00 device FO13FF-65 PC-CAM (05c8:0103)
Oct 14 09:23:44 pedro-laptop kernel: [   19.529591] input: FO13FF-65 PC-CAM as /devices/pci0000:00/0000:00:13.5/usb1/1-9/1-9:1.0/input/input7
Oct 14 09:23:44 pedro-laptop kernel: [   19.529657] usbcore: registered new interface driver uvcvideo
Oct 14 09:23:44 pedro-laptop kernel: [   19.529661] USB Video Class driver (v0.1.0)
Oct 14 09:23:44 pedro-laptop kernel: [   19.930832] cfg80211: World regulatory domain updated:
Oct 14 09:23:44 pedro-laptop kernel: [   19.930838] 	(start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
Oct 14 09:23:44 pedro-laptop kernel: [   19.930842] 	(2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Oct 14 09:23:44 pedro-laptop kernel: [   19.930845] 	(2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
Oct 14 09:23:44 pedro-laptop kernel: [   19.930848] 	(2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
Oct 14 09:23:44 pedro-laptop kernel: [   19.930852] 	(5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Oct 14 09:23:44 pedro-laptop kernel: [   19.930855] 	(5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Oct 14 09:23:44 pedro-laptop kernel: [   20.154839] Synaptics Touchpad, model: 1, fw: 6.2, id: 0x25a0b1, caps: 0xa04713/0x200000
Oct 14 09:23:44 pedro-laptop kernel: [   20.203905] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio2/input/input8
Oct 14 09:23:44 pedro-laptop kernel: [   24.921781] ath5k 0000:08:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
Oct 14 09:23:44 pedro-laptop kernel: [   24.921795] ath5k 0000:08:00.0: setting latency timer to 64
Oct 14 09:23:44 pedro-laptop kernel: [   24.921856] ath5k 0000:08:00.0: registered as 'phy0'
Oct 14 09:23:44 pedro-laptop kernel: [   25.011965] ath: EEPROM regdomain: 0x60
Oct 14 09:23:44 pedro-laptop kernel: [   25.011969] ath: EEPROM indicates we should expect a direct regpair map
Oct 14 09:23:44 pedro-laptop kernel: [   25.011974] ath: Country alpha2 being used: 00
Oct 14 09:23:44 pedro-laptop kernel: [   25.011976] ath: Regpair used: 0x60
Oct 14 09:23:44 pedro-laptop kernel: [   25.550695] phy0: Selected rate control algorithm 'minstrel'
Oct 14 09:23:44 pedro-laptop kernel: [   25.551638] Registered led device: ath5k-phy0::rx
Oct 14 09:23:44 pedro-laptop kernel: [   25.551662] Registered led device: ath5k-phy0::tx
Oct 14 09:23:44 pedro-laptop kernel: [   25.551666] ath5k phy0: Atheros AR2425 chip found (MAC: 0xe2, PHY: 0x70)
Oct 14 09:23:44 pedro-laptop kernel: [   26.235944] HDA Intel 0000:00:14.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16
Oct 14 09:23:44 pedro-laptop kernel: [   26.463248] hda_codec: Unknown model for ALC262, trying auto-probe from BIOS...
Oct 14 09:23:44 pedro-laptop kernel: [   26.463393] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:14.2/input/input9
Oct 14 09:23:44 pedro-laptop kernel: [   30.911697] kjournald starting.  Commit interval 5 seconds
Oct 14 09:23:44 pedro-laptop kernel: [   30.912028] EXT3 FS on sda6, internal journal
Oct 14 09:23:44 pedro-laptop kernel: [   30.912034] EXT3-fs: mounted filesystem with writeback data mode.
Oct 14 09:23:44 pedro-laptop kernel: [   31.497759] __ratelimit: 3 callbacks suppressed
Oct 14 09:23:44 pedro-laptop kernel: [   31.497764] type=1505 audit(1255523024.753:13): operation="profile_replace" pid=902 name=/usr/share/gdm/guest-session/Xsession
Oct 14 09:23:44 pedro-laptop kernel: [   31.500172] type=1505 audit(1255523024.757:14): operation="profile_replace" pid=903 name=/sbin/dhclient3
Oct 14 09:23:44 pedro-laptop kernel: [   31.501125] type=1505 audit(1255523024.757:15): operation="profile_replace" pid=903 name=/usr/lib/NetworkManager/nm-dhcp-client.action
Oct 14 09:23:44 pedro-laptop kernel: [   31.501632] type=1505 audit(1255523024.757:16): operation="profile_replace" pid=903 name=/usr/lib/connman/scripts/dhclient-script
Oct 14 09:23:44 pedro-laptop kernel: [   31.506851] type=1505 audit(1255523024.761:17): operation="profile_replace" pid=904 name=/usr/bin/evince
Oct 14 09:23:44 pedro-laptop kernel: [   31.520336] type=1505 audit(1255523024.777:18): operation="profile_replace" pid=904 name=/usr/bin/evince-previewer
Oct 14 09:23:44 pedro-laptop kernel: [   31.527919] type=1505 audit(1255523024.781:19): operation="profile_replace" pid=904 name=/usr/bin/evince-thumbnailer
Oct 14 09:23:48 pedro-laptop NetworkManager: <info>  starting...
Oct 14 09:23:48 pedro-laptop NetworkManager: <info>  Trying to start the modem-manager...
Oct 14 09:23:48 pedro-laptop NetworkManager:    SCPlugin-Ifupdown: init!
Oct 14 09:23:48 pedro-laptop NetworkManager:    SCPlugin-Ifupdown: update_system_hostname
Oct 14 09:23:48 pedro-laptop NetworkManager:    SCPluginIfupdown: management mode: unmanaged
Oct 14 09:23:48 pedro-laptop NetworkManager:    SCPlugin-Ifupdown: devices added (path: /sys/devices/pci0000:00/0000:00:04.0/0000:02:00.0/net/eth0, iface: eth0)
Oct 14 09:23:48 pedro-laptop NetworkManager:    SCPlugin-Ifupdown: device added (path: /sys/devices/pci0000:00/0000:00:04.0/0000:02:00.0/net/eth0, iface: eth0): no ifupdown configuration found.
Oct 14 09:23:48 pedro-laptop NetworkManager:    SCPlugin-Ifupdown: devices added (path: /sys/devices/pci0000:00/0000:00:07.0/0000:08:00.0/net/wlan0, iface: wlan0)
Oct 14 09:23:48 pedro-laptop NetworkManager:    SCPlugin-Ifupdown: device added (path: /sys/devices/pci0000:00/0000:00:07.0/0000:08:00.0/net/wlan0, iface: wlan0): no ifupdown configuration found.
Oct 14 09:23:48 pedro-laptop NetworkManager:    SCPlugin-Ifupdown: devices added (path: /sys/devices/pci0000:00/0000:00:07.0/0000:08:00.0/net/wmaster0, iface: wmaster0)
Oct 14 09:23:48 pedro-laptop NetworkManager:    SCPlugin-Ifupdown: device added (path: /sys/devices/pci0000:00/0000:00:07.0/0000:08:00.0/net/wmaster0, iface: wmaster0): no ifupdown configuration found.
Oct 14 09:23:48 pedro-laptop NetworkManager:    SCPlugin-Ifupdown: devices added (path: /sys/devices/virtual/net/lo, iface: lo)
Oct 14 09:23:48 pedro-laptop NetworkManager:    SCPlugin-Ifupdown: device added (path: /sys/devices/virtual/net/lo, iface: lo): no ifupdown configuration found.
Oct 14 09:23:48 pedro-laptop NetworkManager:    SCPlugin-Ifupdown: end _init.
Oct 14 09:23:48 pedro-laptop NetworkManager: Loaded plugin ifupdown: (C) 2008 Canonical Ltd.  To report bugs please use the NetworkManager mailing list.
Oct 14 09:23:49 pedro-laptop modem-manager: Loaded plugin Ericsson MBM
Oct 14 09:23:49 pedro-laptop modem-manager: Loaded plugin Huawei
Oct 14 09:23:49 pedro-laptop modem-manager: Loaded plugin Nokia
Oct 14 09:23:49 pedro-laptop NetworkManager: Loaded plugin keyfile: (c) 2007 - 2008 Red Hat, Inc.  To report bugs please use the NetworkManager mailing list.
Oct 14 09:23:49 pedro-laptop NetworkManager: <info>  Found radio killswitch rfkill0 (at /sys/devices/pci0000:00/0000:00:07.0/0000:08:00.0/ieee80211/phy0/rfkill0) (driver <unknown>)
Oct 14 09:23:49 pedro-laptop NetworkManager: <info>  Wireless now enabled by radio killswitch
Oct 14 09:23:49 pedro-laptop NetworkManager:    SCPlugin-Ifupdown: (164604656) ... get_connections.
Oct 14 09:23:49 pedro-laptop NetworkManager:    SCPlugin-Ifupdown: (164604656) ... get_connections (managed=false): return empty list.
Oct 14 09:23:49 pedro-laptop modem-manager: Loaded plugin MotoC
Oct 14 09:23:49 pedro-laptop modem-manager: Loaded plugin Generic
Oct 14 09:23:49 pedro-laptop modem-manager: Loaded plugin Option High-Speed
Oct 14 09:23:49 pedro-laptop modem-manager: Loaded plugin ZTE
Oct 14 09:23:49 pedro-laptop modem-manager: Loaded plugin Gobi
Oct 14 09:23:49 pedro-laptop modem-manager: Loaded plugin Sierra
Oct 14 09:23:49 pedro-laptop modem-manager: Loaded plugin Novatel
Oct 14 09:23:49 pedro-laptop modem-manager: Loaded plugin Option
Oct 14 09:23:50 pedro-laptop NetworkManager:    Ifupdown: get unmanaged devices count: 0
Oct 14 09:23:50 pedro-laptop NetworkManager: <info>  (eth0): carrier is OFF
Oct 14 09:23:50 pedro-laptop NetworkManager: <info>  (eth0): new Ethernet device (driver: 'sky2')
Oct 14 09:23:50 pedro-laptop NetworkManager: <info>  (eth0): exported as /org/freedesktop/NetworkManager/Devices/0
Oct 14 09:23:50 pedro-laptop NetworkManager: <info>  (eth0): now managed
Oct 14 09:23:50 pedro-laptop NetworkManager: <info>  (eth0): device state change: 1 -> 2 (reason 2)
Oct 14 09:23:50 pedro-laptop NetworkManager: <info>  (eth0): bringing up device.
Oct 14 09:23:50 pedro-laptop NetworkManager: <info>  (eth0): preparing device.
Oct 14 09:23:50 pedro-laptop NetworkManager: <info>  (eth0): deactivating device (reason: 2).
Oct 14 09:23:50 pedro-laptop NetworkManager: Added default wired connection 'Auto eth0' for /sys/devices/pci0000:00/0000:00:04.0/0000:02:00.0/net/eth0
Oct 14 09:23:50 pedro-laptop NetworkManager: <info>  (wlan0): driver supports SSID scans (scan_capa 0x01).
Oct 14 09:23:50 pedro-laptop NetworkManager: <info>  (wlan0): new 802.11 WiFi device (driver: 'ath5k')
Oct 14 09:23:50 pedro-laptop NetworkManager: <info>  (wlan0): exported as /org/freedesktop/NetworkManager/Devices/1
Oct 14 09:23:50 pedro-laptop NetworkManager: <info>  (wlan0): now managed
Oct 14 09:23:50 pedro-laptop NetworkManager: <info>  (wlan0): device state change: 1 -> 2 (reason 2)
Oct 14 09:23:50 pedro-laptop NetworkManager: <info>  (wlan0): bringing up device.
Oct 14 09:23:50 pedro-laptop NetworkManager: <info>  (wlan0): preparing device.
Oct 14 09:23:50 pedro-laptop NetworkManager: <info>  (wlan0): deactivating device (reason: 2).
Oct 14 09:23:50 pedro-laptop NetworkManager: supplicant_interface_acquire: assertion `mgr_state == NM_SUPPLICANT_MANAGER_STATE_IDLE' failed
Oct 14 09:23:50 pedro-laptop NetworkManager: <info>  modem-manager is now available
Oct 14 09:23:50 pedro-laptop NetworkManager: <WARN>  default_adapter_cb(): bluez error getting default adapter: The name org.bluez was not provided by any .service files
Oct 14 09:23:50 pedro-laptop NetworkManager: <info>  Trying to start the supplicant...
Oct 14 09:23:52 pedro-laptop kernel: [   31.539078] type=1505 audit(1255523024.793:20): operation="profile_replace" pid=906 name=/usr/lib/cups/backend/cups-pdf
Oct 14 09:23:52 pedro-laptop NetworkManager: <info>  (eth0): carrier now ON (device state 2)
Oct 14 09:23:52 pedro-laptop kernel: [   31.540199] type=1505 audit(1255523024.797:21): operation="profile_replace" pid=906 name=/usr/sbin/cupsd
Oct 14 09:23:52 pedro-laptop NetworkManager: <info>  (eth0): device state change: 2 -> 3 (reason 40)
Oct 14 09:23:52 pedro-laptop NetworkManager: <info>  Activation (eth0) starting connection 'Auto eth0'
Oct 14 09:23:52 pedro-laptop NetworkManager: <info>  (eth0): device state change: 3 -> 4 (reason 0)
Oct 14 09:23:52 pedro-laptop NetworkManager: <info>  Activation (eth0) Stage 1 of 5 (Device Prepare) scheduled...
Oct 14 09:23:52 pedro-laptop NetworkManager: <info>  Activation (eth0) Stage 1 of 5 (Device Prepare) started...
Oct 14 09:23:52 pedro-laptop kernel: [   31.644709] type=1505 audit(1255523024.898:22): operation="profile_replace" pid=907 name=/usr/sbin/ntpd
Oct 14 09:23:52 pedro-laptop kernel: [   37.511717] sky2 eth0: enabling interface
Oct 14 09:23:52 pedro-laptop kernel: [   37.511958] ADDRCONF(NETDEV_UP): eth0: link is not ready
Oct 14 09:23:52 pedro-laptop kernel: [   37.572350] ADDRCONF(NETDEV_UP): wlan0: link is not ready
Oct 14 09:23:52 pedro-laptop NetworkManager: <info>  Activation (eth0) Stage 2 of 5 (Device Configure) scheduled...
Oct 14 09:23:52 pedro-laptop NetworkManager: <info>  Activation (eth0) Stage 1 of 5 (Device Prepare) complete.
Oct 14 09:23:52 pedro-laptop NetworkManager: <info>  Activation (eth0) Stage 2 of 5 (Device Configure) starting...
Oct 14 09:23:52 pedro-laptop NetworkManager: <info>  (eth0): device state change: 4 -> 5 (reason 0)
Oct 14 09:23:52 pedro-laptop NetworkManager: <info>  Activation (eth0) Stage 2 of 5 (Device Configure) successful.
Oct 14 09:23:52 pedro-laptop NetworkManager: <info>  Activation (eth0) Stage 3 of 5 (IP Configure Start) scheduled.
Oct 14 09:23:52 pedro-laptop NetworkManager: <info>  Activation (eth0) Stage 2 of 5 (Device Configure) complete.
Oct 14 09:23:52 pedro-laptop NetworkManager: <info>  Activation (eth0) Stage 3 of 5 (IP Configure Start) started...
Oct 14 09:23:52 pedro-laptop NetworkManager: <info>  (eth0): device state change: 5 -> 7 (reason 0)
Oct 14 09:23:52 pedro-laptop NetworkManager: <info>  Activation (eth0) Beginning DHCP transaction (timeout in 45 seconds)
Oct 14 09:23:52 pedro-laptop NetworkManager: <info>  dhclient started with pid 1243
Oct 14 09:23:52 pedro-laptop NetworkManager: <info>  Activation (eth0) Stage 4 of 5 (IP6 Configure Get) scheduled...
Oct 14 09:23:52 pedro-laptop NetworkManager: <info>  Activation (eth0) Stage 3 of 5 (IP Configure Start) complete.
Oct 14 09:23:52 pedro-laptop dhclient: Internet Systems Consortium DHCP Client V3.1.2
Oct 14 09:23:52 pedro-laptop dhclient: Copyright 2004-2008 Internet Systems Consortium.
Oct 14 09:23:52 pedro-laptop dhclient: All rights reserved.
Oct 14 09:23:52 pedro-laptop dhclient: For info, please visit http://www.isc.org/sw/dhcp/
Oct 14 09:23:52 pedro-laptop dhclient: 
Oct 14 09:23:52 pedro-laptop NetworkManager: <info>  Activation (eth0) Stage 4 of 5 (IP6 Configure Get) started...
Oct 14 09:23:52 pedro-laptop NetworkManager: <info>  Activation (eth0) Stage 4 of 5 (IP6 Configure Get) complete.
Oct 14 09:23:52 pedro-laptop NetworkManager: <info>  DHCP: device eth0 state changed (null) -> preinit
Oct 14 09:23:52 pedro-laptop dhclient: Listening on LPF/eth0/00:e0:91:15:a0:3f
Oct 14 09:23:52 pedro-laptop dhclient: Sending on   LPF/eth0/00:e0:91:15:a0:3f
Oct 14 09:23:52 pedro-laptop dhclient: Sending on   Socket/fallback
Oct 14 09:23:55 pedro-laptop dhclient: DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 5
Oct 14 09:23:55 pedro-laptop dhclient: DHCPOFFER of 192.168.2.218 from 192.168.1.1
Oct 14 09:23:55 pedro-laptop dhclient: DHCPREQUEST of 192.168.2.218 on eth0 to 255.255.255.255 port 67
Oct 14 09:23:55 pedro-laptop dhclient: DHCPACK of 192.168.2.218 from 192.168.1.1
Oct 14 09:23:55 pedro-laptop dhclient: bound to 192.168.2.218 -- renewal in 66196 seconds.
Oct 14 09:23:55 pedro-laptop NetworkManager: <info>  DHCP: device eth0 state changed preinit -> bound
Oct 14 09:23:55 pedro-laptop NetworkManager: <info>  Activation (eth0) Stage 4 of 5 (IP4 Configure Get) scheduled...
Oct 14 09:23:55 pedro-laptop NetworkManager: <info>  Activation (eth0) Stage 4 of 5 (IP4 Configure Get) started...
Oct 14 09:23:55 pedro-laptop NetworkManager: <info>    address 192.168.2.218
Oct 14 09:23:55 pedro-laptop NetworkManager: <info>    prefix 16 (255.255.0.0)
Oct 14 09:23:55 pedro-laptop NetworkManager: <info>    gateway 192.168.2.1
Oct 14 09:23:55 pedro-laptop NetworkManager: <info>    nameserver '192.168.1.1'
Oct 14 09:23:55 pedro-laptop NetworkManager: <info>    nameserver '192.168.2.1'
Oct 14 09:23:55 pedro-laptop NetworkManager: <info>    nameserver '200.19.104.1'
Oct 14 09:23:55 pedro-laptop NetworkManager: <info>    nameserver '200.18.6.1'
Oct 14 09:23:55 pedro-laptop NetworkManager: <info>    domain name 'cav.udesc.br'
Oct 14 09:23:55 pedro-laptop NetworkManager: <info>    wins '192.168.2.10'
Oct 14 09:23:55 pedro-laptop NetworkManager: <info>  Activation (eth0) Stage 5 of 5 (IP Configure Commit) scheduled...
Oct 14 09:23:55 pedro-laptop NetworkManager: <info>  Activation (eth0) Stage 4 of 5 (IP4 Configure Get) complete.
Oct 14 09:23:55 pedro-laptop NetworkManager: <info>  Activation (eth0) Stage 5 of 5 (IP Configure Commit) started...
Oct 14 09:23:56 pedro-laptop NetworkManager: <info>  (eth0): device state change: 7 -> 8 (reason 0)
Oct 14 09:23:56 pedro-laptop NetworkManager: <info>  Policy set 'Auto eth0' (eth0) as default for routing and DNS.
Oct 14 09:23:56 pedro-laptop NetworkManager: <info>  Activation (eth0) successful, device activated.
Oct 14 09:23:56 pedro-laptop NetworkManager: <info>  Activation (eth0) Stage 5 of 5 (IP Configure Commit) complete.
Oct 14 09:23:56 pedro-laptop NetworkManager: <info>  (wlan0): supplicant manager state:  down -> idle
Oct 14 09:23:56 pedro-laptop NetworkManager: <info>  (wlan0): device state change: 2 -> 3 (reason 0)
Oct 14 09:23:56 pedro-laptop NetworkManager: <info>  (wlan0): supplicant interface state:  starting -> ready