[ 16.486329] vboxdrv: Trying to deactivate the NMI watchdog permanently... [ 16.486335] vboxdrv: Warning: 2.6.31+ kernel detected. Most likely the hardware performance [ 16.486336] vboxdrv: counter framework which can generate NMIs is active. You have to prevent [ 16.486337] vboxdrv: the usage of hardware performance counters by [ 16.486338] vboxdrv: echo 2 > /proc/sys/kernel/perf_counter_paranoid [ 16.486342] vboxdrv: Found 2 processor cores. [ 16.486425] VBoxDrv: dbg - g_abExecMemory=ffffffffa0d9ea20 [ 16.486444] vboxdrv: fAsync=0 offMin=0x16f offMax=0x18fa [ 16.486498] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'. [ 16.486500] vboxdrv: Successfully loaded version 3.1.6 (interface 0x00100001). [ 17.592029] Bluetooth: L2CAP ver 2.14 [ 17.592032] Bluetooth: L2CAP socket layer initialized [ 17.892324] ppdev: user-space parallel port driver [ 17.935659] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 17.935663] Bluetooth: BNEP filters: protocol multicast [ 17.962212] Bridge firewalling registered [ 18.773313] Bluetooth: SCO (Voice Link) ver 0.6 [ 18.773316] Bluetooth: SCO socket layer initialized [ 19.193380] Bluetooth: RFCOMM TTY layer initialized [ 19.193386] Bluetooth: RFCOMM socket layer initialized [ 19.193388] Bluetooth: RFCOMM ver 1.11 [ 19.901082] ACPI Warning for \_SB_.PCI0.PEGP.VGA0.MXMI: Excess arguments - needs 1, found 2 (20090903/nspredef-303) [ 19.901129] ACPI Warning for \_SB_.PCI0.PEGP.VGA0.MXMS: Excess arguments - needs 1, found 2 (20090903/nspredef-303) [ 22.862239] CPU0 attaching NULL sched-domain. [ 22.862246] CPU1 attaching NULL sched-domain. [ 23.901330] CPU0 attaching sched-domain: [ 23.901334] domain 0: span 0-1 level MC [ 23.901337] groups: 0 1 [ 23.901342] CPU1 attaching sched-domain: [ 23.901344] domain 0: span 0-1 level MC [ 23.901346] groups: 1 0 [ 25.782200] ip_tables: (C) 2000-2006 Netfilter Core Team [ 38.008781] CPU0 attaching NULL sched-domain. [ 38.008787] CPU1 attaching NULL sched-domain. [ 38.060076] CPU0 attaching sched-domain: [ 38.060080] domain 0: span 0-1 level MC [ 38.060083] groups: 0 1 [ 38.060088] CPU1 attaching sched-domain: [ 38.060090] domain 0: span 0-1 level MC [ 38.060093] groups: 1 0 [ 55.797901] Intel AES-NI instructions are not detected. [ 55.822424] padlock: VIA PadLock not detected. [ 66.800873] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 92.568296] ISO 9660 Extensions: Microsoft Joliet Level 1 [ 92.570816] ISOFS: changing to secondary root [ 310.381791] usb 2-3: USB disconnect, address 2 [ 312.140608] scsi 6:0:0:0: rejecting I/O to dead device [ 317.660041] usb 2-3: new high speed USB device using ehci_hcd and address 5 [ 317.812797] usb 2-3: configuration #1 chosen from 1 choice [ 317.816060] scsi9 : SCSI emulation for USB Mass Storage devices [ 317.816315] usb-storage: device found at 5 [ 317.816318] usb-storage: waiting for device to settle before scanning [ 317.816425] scsi10 : SCSI emulation for USB Mass Storage devices [ 317.816616] usb-storage: device found at 5 [ 317.816619] usb-storage: waiting for device to settle before scanning [ 318.405875] usb 2-3: USB disconnect, address 5 [ 322.910049] usb 2-3: new high speed USB device using ehci_hcd and address 6 [ 323.062762] usb 2-3: configuration #1 chosen from 1 choice [ 323.069692] scsi11 : SCSI emulation for USB Mass Storage devices [ 323.069975] usb-storage: device found at 6 [ 323.069978] usb-storage: waiting for device to settle before scanning [ 323.070017] scsi12 : SCSI emulation for USB Mass Storage devices [ 323.070185] usb-storage: device found at 6 [ 323.070188] usb-storage: waiting for device to settle before scanning [ 323.091699] usbcore: registered new interface driver usbserial [ 323.091775] USB Serial support registered for generic [ 323.092707] usbcore: registered new interface driver usbserial_generic [ 323.092711] usbserial: USB Serial Driver core [ 323.096355] USB Serial support registered for GSM modem (1-port) [ 323.097546] option 2-3:1.0: GSM modem (1-port) converter detected [ 323.097787] usb 2-3: GSM modem (1-port) converter now attached to ttyUSB0 [ 323.097808] option 2-3:1.1: GSM modem (1-port) converter detected [ 323.097951] usb 2-3: GSM modem (1-port) converter now attached to ttyUSB1 [ 323.097969] option 2-3:1.2: GSM modem (1-port) converter detected [ 323.098094] usb 2-3: GSM modem (1-port) converter now attached to ttyUSB2 [ 323.098112] option 2-3:1.3: GSM modem (1-port) converter detected [ 323.098231] usb 2-3: GSM modem (1-port) converter now attached to ttyUSB3 [ 323.098256] usbcore: registered new interface driver option [ 323.098258] option: v0.7.2:USB Driver for GSM modems [ 328.060595] usb-storage: device scan complete [ 328.068571] scsi 11:0:0:0: CD-ROM HUAWEI Mass Storage 2.31 PQ: 0 ANSI: 2 [ 328.072786] usb-storage: device scan complete [ 328.074190] scsi 12:0:0:0: Direct-Access HUAWEI TF CARD Storage PQ: 0 ANSI: 2 [ 328.076679] sr1: scsi-1 drive [ 328.076881] sr 11:0:0:0: Attached scsi CD-ROM sr1 [ 328.076995] sr 11:0:0:0: Attached scsi generic sg2 type 5 [ 328.077380] sd 12:0:0:0: Attached scsi generic sg3 type 0 [ 328.078582] sd 12:0:0:0: [sdb] 3842048 512-byte logical blocks: (1.96 GB/1.83 GiB) [ 328.079669] sd 12:0:0:0: [sdb] Write Protect is off [ 328.079674] sd 12:0:0:0: [sdb] Mode Sense: 0f 0e 00 00 [ 328.079678] sd 12:0:0:0: [sdb] Assuming drive cache: write through [ 328.083128] sd 12:0:0:0: [sdb] Assuming drive cache: write through [ 328.083138] sdb: sdb1 [ 328.096299] sd 12:0:0:0: [sdb] Assuming drive cache: write through [ 328.096305] sd 12:0:0:0: [sdb] Attached SCSI removable disk [ 331.683026] PPP BSD Compression module registered [ 331.687862] PPP Deflate Compression module registered [ 340.866921] ISO 9660 Extensions: Microsoft Joliet Level 1 [ 340.868772] ISOFS: changing to secondary root [ 347.144095] sdb: detected capacity change from 1967128576 to 0 [ 357.230969] usb 2-3: USB disconnect, address 6 [ 357.231046] option: option_instat_callback: error -108 [ 357.231202] option: option_instat_callback: error -108 [ 357.231539] option1 ttyUSB0: GSM modem (1-port) converter now disconnected from ttyUSB0 [ 357.231562] option 2-3:1.0: device disconnected [ 357.231826] option1 ttyUSB1: GSM modem (1-port) converter now disconnected from ttyUSB1 [ 357.231866] option 2-3:1.1: device disconnected [ 357.232095] option1 ttyUSB2: GSM modem (1-port) converter now disconnected from ttyUSB2 [ 357.232126] option 2-3:1.2: device disconnected [ 357.232343] option1 ttyUSB3: GSM modem (1-port) converter now disconnected from ttyUSB3 [ 357.232375] option 2-3:1.3: device disconnected [ 362.271287] usb 2-3: new high speed USB device using ehci_hcd and address 7 [ 362.422739] usb 2-3: configuration #1 chosen from 1 choice [ 362.428256] scsi13 : SCSI emulation for USB Mass Storage devices [ 362.428492] usb-storage: device found at 7 [ 362.428495] usb-storage: waiting for device to settle before scanning [ 362.428529] scsi14 : SCSI emulation for USB Mass Storage devices [ 362.428679] usb-storage: device found at 7 [ 362.428682] usb-storage: waiting for device to settle before scanning [ 362.962558] usb 2-3: USB disconnect, address 7 [ 367.460052] usb 2-3: new high speed USB device using ehci_hcd and address 8 [ 367.612693] usb 2-3: configuration #1 chosen from 1 choice [ 367.619180] option 2-3:1.0: GSM modem (1-port) converter detected [ 367.619351] usb 2-3: GSM modem (1-port) converter now attached to ttyUSB0 [ 367.620563] option 2-3:1.1: GSM modem (1-port) converter detected [ 367.620715] usb 2-3: GSM modem (1-port) converter now attached to ttyUSB1 [ 367.620874] option 2-3:1.2: GSM modem (1-port) converter detected [ 367.620982] usb 2-3: GSM modem (1-port) converter now attached to ttyUSB2 [ 367.621093] option 2-3:1.3: GSM modem (1-port) converter detected [ 367.621203] usb 2-3: GSM modem (1-port) converter now attached to ttyUSB3 [ 367.631712] scsi15 : SCSI emulation for USB Mass Storage devices [ 367.638045] usb-storage: device found at 8 [ 367.638048] usb-storage: waiting for device to settle before scanning [ 367.648312] scsi16 : SCSI emulation for USB Mass Storage devices [ 367.664990] usb-storage: device found at 8 [ 367.664993] usb-storage: waiting for device to settle before scanning [ 372.630667] usb-storage: device scan complete [ 372.631377] scsi 15:0:0:0: CD-ROM HUAWEI Mass Storage 2.31 PQ: 0 ANSI: 2 [ 372.639468] sr1: scsi-1 drive [ 372.639661] sr 15:0:0:0: Attached scsi CD-ROM sr1 [ 372.639780] sr 15:0:0:0: Attached scsi generic sg2 type 5 [ 372.660686] usb-storage: device scan complete [ 372.661514] scsi 16:0:0:0: Direct-Access HUAWEI TF CARD Storage PQ: 0 ANSI: 2 [ 372.662558] sd 16:0:0:0: Attached scsi generic sg3 type 0 [ 372.664038] sd 16:0:0:0: [sdb] 3842048 512-byte logical blocks: (1.96 GB/1.83 GiB) [ 372.667043] sd 16:0:0:0: [sdb] Write Protect is off [ 372.667050] sd 16:0:0:0: [sdb] Mode Sense: 0f 0e 00 00 [ 372.667054] sd 16:0:0:0: [sdb] Assuming drive cache: write through [ 372.671529] sd 16:0:0:0: [sdb] Assuming drive cache: write through [ 372.671537] sdb: sdb1 [ 372.679634] sd 16:0:0:0: [sdb] Assuming drive cache: write through [ 372.679641] sd 16:0:0:0: [sdb] Attached SCSI removable disk [ 383.769243] ISO 9660 Extensions: Microsoft Joliet Level 1 [ 383.770378] ISOFS: changing to secondary root [ 390.120375] sdb: detected capacity change from 1967128576 to 0 [ 552.860043] ACPI Exception: AE_TIME, Returned by Handler for [EmbeddedControl] (20090903/evregion-424) [ 552.860066] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.BAT0._BST] (Node ffff88013ba3c240), AE_TIME [ 552.860138] ACPI Exception: AE_TIME, Evaluating _BST (20090903/battery-393) [ 1471.022878] CPU0 attaching NULL sched-domain. [ 1471.022887] CPU1 attaching NULL sched-domain. [ 1471.110198] CPU0 attaching sched-domain: [ 1471.110204] domain 0: span 0-1 level MC [ 1471.110209] groups: 0 1 [ 1471.110216] domain 1: span 0-1 level CPU [ 1471.110220] groups: 0-1 (cpu_power = 2048) [ 1471.110229] CPU1 attaching sched-domain: [ 1471.110232] domain 0: span 0-1 level MC [ 1471.110236] groups: 1 0 [ 1471.110242] domain 1: span 0-1 level CPU [ 1471.110246] groups: 0-1 (cpu_power = 2048)