[ 0.000000] BIOS EBDA/lowmem at: 0009fc00/0009e800 [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.28-15-generic (buildd@palmer) (gcc version 4.3.3 (Ubuntu 4.3.3-5ubuntu4) ) #49-Ubuntu SMP Tue Aug 18 18:40:08 UTC 2009 (Ubuntu 2.6.28-15.49-generic) [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] NSC Geode by NSC [ 0.000000] Cyrix CyrixInstead [ 0.000000] Centaur CentaurHauls [ 0.000000] Transmeta GenuineTMx86 [ 0.000000] Transmeta TransmetaCPU [ 0.000000] UMC UMC UMC UMC [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009e800 (usable) [ 0.000000] BIOS-e820: 000000000009e800 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000005fff0000 (usable) [ 0.000000] BIOS-e820: 000000005fff0000 - 000000005fff3000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000005fff3000 - 0000000060000000 (ACPI data) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved) [ 0.000000] DMI 2.2 present. [ 0.000000] last_pfn = 0x5fff0 max_arch_pfn = 0x100000 [ 0.000000] Scanning 2 areas for low memory corruption [ 0.000000] modified physical RAM map: [ 0.000000] modified: 0000000000000000 - 0000000000002000 (usable) [ 0.000000] modified: 0000000000002000 - 0000000000006000 (reserved) [ 0.000000] modified: 0000000000006000 - 0000000000007000 (usable) [ 0.000000] modified: 0000000000007000 - 0000000000010000 (reserved) [ 0.000000] modified: 0000000000010000 - 0000000000091800 (usable) [ 0.000000] modified: 000000000009e800 - 00000000000a0000 (reserved) [ 0.000000] modified: 00000000000f0000 - 0000000000100000 (reserved) [ 0.000000] modified: 0000000000100000 - 000000005fff0000 (usable) [ 0.000000] modified: 000000005fff0000 - 000000005fff3000 (ACPI NVS) [ 0.000000] modified: 000000005fff3000 - 0000000060000000 (ACPI data) [ 0.000000] modified: 00000000fec00000 - 00000000fec01000 (reserved) [ 0.000000] modified: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] modified: 00000000ffff0000 - 0000000100000000 (reserved) [ 0.000000] kernel direct mapping tables up to 373fe000 @ 10000-16000 [ 0.000000] RAMDISK: 0392d000 - 040ef25f [ 0.000000] ACPI: RSDP 000F7840, 0014 (r0 VIA694) [ 0.000000] ACPI: RSDT 5FFF3000, 002C (r1 VIA694 AWRDACPI 42302E31 AWRD 0) [ 0.000000] ACPI: FACP 5FFF3040, 0074 (r1 VIA694 AWRDACPI 42302E31 AWRD 0) [ 0.000000] ACPI: DSDT 5FFF30C0, 411A (r1 VIA694 AWRDACPI 1000 MSFT 100000C) [ 0.000000] ACPI: FACS 5FFF0000, 0040 [ 0.000000] ACPI: APIC 5FFF7200, 005A (r1 VIA694 AWRDACPI 42302E31 AWRD 0) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] 651MB HIGHMEM available. [ 0.000000] 883MB LOWMEM available. [ 0.000000] mapped low ram: 0 - 373fe000 [ 0.000000] low ram: 00000000 - 373fe000 [ 0.000000] bootmap 00012000 - 00018e80 [ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 00373fe000] [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] [ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000] [ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000] [ 0.000000] #3 [0000100000 - 00008780ac] TEXT DATA BSS ==> [0000100000 - 00008780ac] [ 0.000000] #4 [000392d000 - 00040ef25f] RAMDISK ==> [000392d000 - 00040ef25f] [ 0.000000] #5 [0000879000 - 000087d000] INIT_PG_TABLE ==> [0000879000 - 000087d000] [ 0.000000] #6 [000009e800 - 0000100000] BIOS reserved ==> [000009e800 - 0000100000] [ 0.000000] #7 [0000010000 - 0000012000] PGTABLE ==> [0000010000 - 0000012000] [ 0.000000] #8 [0000012000 - 0000019000] BOOTMAP ==> [0000012000 - 0000019000] [ 0.000000] found SMP MP-table at [c00f5e30] 000f5e30 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000000 -> 0x00001000 [ 0.000000] Normal 0x00001000 -> 0x000373fe [ 0.000000] HighMem 0x000373fe -> 0x0005fff0 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[4] active PFN ranges [ 0.000000] 0: 0x00000000 -> 0x00000002 [ 0.000000] 0: 0x00000006 -> 0x00000007 [ 0.000000] 0: 0x00000010 -> 0x00000091 [ 0.000000] 0: 0x00000100 -> 0x0005fff0 [ 0.000000] On node 0 totalpages: 393076 [ 0.000000] free_area_init_node: node 0, pgdat c06cb500, node_mem_map c1000000 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 3940 pages, LIFO batch:0 [ 0.000000] Normal zone: 1736 pages used for memmap [ 0.000000] Normal zone: 220470 pages, LIFO batch:31 [ 0.000000] HighMem zone: 1304 pages used for memmap [ 0.000000] HighMem zone: 165594 pages, LIFO batch:31 [ 0.000000] Movable zone: 0 pages used for memmap [ 0.000000] ACPI: PM-Timer IO Port: 0x4008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 3, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 dfl dfl) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] SMP: Allowing 1 CPUs, 0 hotplug CPUs [ 0.000000] PM: Registered nosave memory: 0000000000002000 - 0000000000006000 [ 0.000000] PM: Registered nosave memory: 0000000000007000 - 0000000000010000 [ 0.000000] PM: Registered nosave memory: 0000000000091000 - 000000000009f000 [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000 [ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000 [ 0.000000] Allocating PCI resources starting at 70000000 (gap: 60000000:9ec00000) [ 0.000000] PERCPU: Allocating 45056 bytes of per cpu data [ 0.000000] NR_CPUS: 64, nr_cpu_ids: 1, nr_node_ids 1 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 390004 [ 0.000000] Kernel command line: BOOT_IMAGE=2.6.28-15 ro root=fc0c root=/dev/severn_vg2/severn_root [ 0.000000] Enabling fast FPU save and restore... done. [ 0.000000] Enabling unmasked SIMD FPU exception support... done. [ 0.000000] Initializing CPU#0 [ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes) [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 2004.574 MHz processor. [ 0.004000] Console: colour VGA+ 80x25 [ 0.004000] console [tty0] enabled [ 0.004000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.004000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.004000] allocated 7864000 bytes of page_cgroup [ 0.004000] please try cgroup_disable=memory option if you don't want [ 0.004000] Scanning for low memory corruption every 60 seconds [ 0.004000] Memory: 1534828k/1572800k available (4115k kernel code, 36484k reserved, 2199k data, 532k init, 667592k highmem) [ 0.004000] virtual kernel memory layout: [ 0.004000] fixmap : 0xffc77000 - 0xfffff000 (3616 kB) [ 0.004000] pkmap : 0xff400000 - 0xff800000 (4096 kB) [ 0.004000] vmalloc : 0xf7bfe000 - 0xff3fe000 ( 120 MB) [ 0.004000] lowmem : 0xc0000000 - 0xf73fe000 ( 883 MB) [ 0.004000] .init : 0xc0733000 - 0xc07b8000 ( 532 kB) [ 0.004000] .data : 0xc0504f5f - 0xc072ae60 (2199 kB) [ 0.004000] .text : 0xc0100000 - 0xc0504f5f (4115 kB) [ 0.004000] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.004000] SLUB: Genslabs=12, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.004019] Calibrating delay loop (skipped), value calculated using timer frequency.. 4009.14 BogoMIPS (lpj=8018296) [ 0.004155] Security Framework initialized [ 0.004221] SELinux: Disabled at boot. [ 0.004314] AppArmor: AppArmor initialized [ 0.004378] Mount-cache hash table entries: 512 [ 0.004655] Initializing cgroup subsys ns [ 0.004711] Initializing cgroup subsys cpuacct [ 0.004764] Initializing cgroup subsys memory [ 0.004821] Initializing cgroup subsys freezer [ 0.004891] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 0.004948] CPU: L2 Cache: 256K (64 bytes/line) [ 0.005024] Checking 'hlt' instruction... OK. [ 0.020594] SMP alternatives: switching to UP code [ 0.148762] Freeing SMP alternatives: 18k freed [ 0.148824] ACPI: Core revision 20080926 [ 0.151209] ACPI: Checking initramfs for custom DSDT [ 0.469027] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.508796] CPU0: AMD Athlon(tm) XP 2400+ stepping 01 [ 0.512002] Brought up 1 CPUs [ 0.512002] Total of 1 processors activated (4009.14 BogoMIPS). [ 0.512002] CPU0 attaching NULL sched-domain. [ 0.512002] net_namespace: 776 bytes [ 0.512002] Booting paravirtualized kernel on bare hardware [ 0.512002] Time: 14:13:01 Date: 10/10/09 [ 0.512002] regulator: core version 0.5 [ 0.512002] NET: Registered protocol family 16 [ 0.512002] EISA bus registered [ 0.512002] ACPI: bus type pci registered [ 0.512174] PCI: PCI BIOS revision 2.10 entry at 0xfb3d0, last bus=2 [ 0.512230] PCI: Using configuration type 1 for base access [ 0.513763] ACPI: EC: Look up EC in DSDT [ 0.519546] ACPI: Interpreter enabled [ 0.519607] ACPI: (supports S0 S1 S4 S5) [ 0.519827] ACPI: Using IOAPIC for interrupt routing [ 0.523976] ACPI: No dock devices found. [ 0.524023] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 0.524135] pci 0000:00:00.0: reg 10 32bit mmio: [0xe8000000-0xe9ffffff] [ 0.524201] pci 0000:00:01.0: supports D1 [ 0.524277] pci 0000:00:0e.0: reg 10 io port: [0xb000-0xb007] [ 0.524283] pci 0000:00:0e.0: reg 14 io port: [0xb400-0xb403] [ 0.524290] pci 0000:00:0e.0: reg 18 io port: [0xb800-0xb807] [ 0.524296] pci 0000:00:0e.0: reg 1c io port: [0xbc00-0xbc03] [ 0.524302] pci 0000:00:0e.0: reg 20 io port: [0xc000-0xc0ff] [ 0.524312] pci 0000:00:0e.0: reg 30 32bit mmio: [0x000000-0x01ffff] [ 0.524345] pci 0000:00:0e.1: reg 10 io port: [0xc400-0xc407] [ 0.524352] pci 0000:00:0e.1: reg 14 io port: [0xc800-0xc803] [ 0.524358] pci 0000:00:0e.1: reg 18 io port: [0xcc00-0xcc07] [ 0.524364] pci 0000:00:0e.1: reg 1c io port: [0xd000-0xd003] [ 0.524370] pci 0000:00:0e.1: reg 20 io port: [0xd400-0xd4ff] [ 0.524432] pci 0000:00:10.0: reg 20 io port: [0xd800-0xd81f] [ 0.524448] pci 0000:00:10.0: supports D1 D2 [ 0.524451] pci 0000:00:10.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.524509] pci 0000:00:10.0: PME# disabled [ 0.524602] pci 0000:00:10.1: reg 20 io port: [0xdc00-0xdc1f] [ 0.524617] pci 0000:00:10.1: supports D1 D2 [ 0.524619] pci 0000:00:10.1: PME# supported from D0 D1 D2 D3hot D3cold [ 0.524677] pci 0000:00:10.1: PME# disabled [ 0.524772] pci 0000:00:10.2: reg 20 io port: [0xe000-0xe01f] [ 0.524788] pci 0000:00:10.2: supports D1 D2 [ 0.524790] pci 0000:00:10.2: PME# supported from D0 D1 D2 D3hot D3cold [ 0.524848] pci 0000:00:10.2: PME# disabled [ 0.524926] pci 0000:00:10.3: reg 10 32bit mmio: [0xef000000-0xef0000ff] [ 0.524956] pci 0000:00:10.3: supports D1 D2 [ 0.524958] pci 0000:00:10.3: PME# supported from D0 D1 D2 D3hot D3cold [ 0.525015] pci 0000:00:10.3: PME# disabled [ 0.525123] HPET not enabled in BIOS. You might try hpet=force boot option [ 0.525832] pci 0000:00:11.0: quirk: region 4000-407f claimed by vt8235 PM [ 0.525890] pci 0000:00:11.0: quirk: region 5000-500f claimed by vt8235 SMB [ 0.525993] pci 0000:00:11.1: reg 20 io port: [0xe400-0xe40f] [ 0.526041] pci 0000:00:11.5: reg 10 io port: [0xe800-0xe8ff] [ 0.526072] pci 0000:00:11.5: supports D1 D2 [ 0.526103] pci 0000:00:12.0: reg 10 io port: [0xec00-0xecff] [ 0.526109] pci 0000:00:12.0: reg 14 32bit mmio: [0xef001000-0xef0010ff] [ 0.526136] pci 0000:00:12.0: supports D1 D2 [ 0.526138] pci 0000:00:12.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.526196] pci 0000:00:12.0: PME# disabled [ 0.526292] pci 0000:01:00.0: reg 10 32bit mmio: [0xea000000-0xeaffffff] [ 0.526298] pci 0000:01:00.0: reg 14 32bit mmio: [0xe0000000-0xe7ffffff] [ 0.526314] pci 0000:01:00.0: reg 30 32bit mmio: [0x000000-0x01ffff] [ 0.526352] pci 0000:00:01.0: bridge 32bit mmio: [0xea000000-0xebffffff] [ 0.526357] pci 0000:00:01.0: bridge 32bit mmio pref: [0xe0000000-0xe7ffffff] [ 0.526390] pci 0000:02:04.0: reg 10 io port: [0xa000-0xa07f] [ 0.526397] pci 0000:02:04.0: reg 14 32bit mmio: [0xed000000-0xed00007f] [ 0.526425] pci 0000:02:04.0: reg 30 32bit mmio: [0x000000-0x03ffff] [ 0.526450] pci 0000:02:05.0: reg 10 io port: [0xa400-0xa47f] [ 0.526458] pci 0000:02:05.0: reg 14 32bit mmio: [0xed001000-0xed00107f] [ 0.526485] pci 0000:02:05.0: reg 30 32bit mmio: [0x000000-0x03ffff] [ 0.526511] pci 0000:02:06.0: reg 10 io port: [0xa800-0xa87f] [ 0.526518] pci 0000:02:06.0: reg 14 32bit mmio: [0xed002000-0xed00207f] [ 0.526546] pci 0000:02:06.0: reg 30 32bit mmio: [0x000000-0x03ffff] [ 0.526571] pci 0000:02:07.0: reg 10 io port: [0xac00-0xac7f] [ 0.526578] pci 0000:02:07.0: reg 14 32bit mmio: [0xed003000-0xed00307f] [ 0.526606] pci 0000:02:07.0: reg 30 32bit mmio: [0x000000-0x03ffff] [ 0.526648] pci 0000:00:09.0: bridge io port: [0xa000-0xafff] [ 0.526652] pci 0000:00:09.0: bridge 32bit mmio: [0xec000000-0xedffffff] [ 0.526667] bus 00 -> node 0 [ 0.526675] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.548011] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 *11 12 14 15) [ 0.548744] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 *10 11 12 14 15) [ 0.549476] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 *11 12 14 15) [ 0.550207] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 *5 6 7 10 11 12 14 15) [ 0.550935] ACPI: PCI Interrupt Link [ALKA] (IRQs 20) *0 [ 0.551316] ACPI: PCI Interrupt Link [ALKB] (IRQs 21) *0 [ 0.551720] ACPI: PCI Interrupt Link [ALKC] (IRQs 22) *0 [ 0.552114] ACPI: PCI Interrupt Link [ALKD] (IRQs 23) *0 [ 0.552470] ACPI: WMI: Mapper loaded [ 0.552836] SCSI subsystem initialized [ 0.552953] libata version 3.00 loaded. [ 0.553032] usbcore: registered new interface driver usbfs [ 0.553108] usbcore: registered new interface driver hub [ 0.553201] usbcore: registered new device driver usb [ 0.553409] PCI: Using ACPI for IRQ routing [ 0.553585] Bluetooth: Core ver 2.13 [ 0.553585] NET: Registered protocol family 31 [ 0.553585] Bluetooth: HCI device and connection manager initialized [ 0.553585] Bluetooth: HCI socket layer initialized [ 0.553585] NET: Registered protocol family 8 [ 0.553585] NET: Registered protocol family 20 [ 0.553585] NetLabel: Initializing [ 0.553585] NetLabel: domain hash size = 128 [ 0.553585] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.553585] NetLabel: unlabeled traffic allowed by default [ 0.553585] AppArmor: AppArmor Filesystem Enabled [ 0.553585] pnp: PnP ACPI init [ 0.553585] ACPI: bus type pnp registered [ 0.557764] pnp: PnP ACPI: found 11 devices [ 0.557818] ACPI: ACPI bus type pnp unregistered [ 0.557874] PnPBIOS: Disabled by ACPI PNP [ 0.557939] system 00:01: ioport range 0x4d0-0x4d1 has been reserved [ 0.557996] system 00:01: ioport range 0x294-0x297 has been reserved [ 0.592787] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01 [ 0.592842] pci 0000:00:01.0: IO window: disabled [ 0.592899] pci 0000:00:01.0: MEM window: 0xea000000-0xebffffff [ 0.592956] pci 0000:00:01.0: PREFETCH window: 0x000000e0000000-0x000000e7ffffff [ 0.593026] pci 0000:00:09.0: PCI bridge, secondary bus 0000:02 [ 0.593082] pci 0000:00:09.0: IO window: 0xa000-0xafff [ 0.593139] pci 0000:00:09.0: MEM window: 0xec000000-0xedffffff [ 0.593196] pci 0000:00:09.0: PREFETCH window: 0x00000070000000-0x000000700fffff [ 0.593276] pci 0000:00:01.0: setting latency timer to 64 [ 0.593286] bus: 00 index 0 io port: [0x00-0xffff] [ 0.593339] bus: 00 index 1 mmio: [0x000000-0xffffffff] [ 0.593393] bus: 01 index 0 mmio: [0x0-0x0] [ 0.593445] bus: 01 index 1 mmio: [0xea000000-0xebffffff] [ 0.593500] bus: 01 index 2 mmio: [0xe0000000-0xe7ffffff] [ 0.593554] bus: 01 index 3 mmio: [0x0-0x0] [ 0.593606] bus: 02 index 0 io port: [0xa000-0xafff] [ 0.593660] bus: 02 index 1 mmio: [0xec000000-0xedffffff] [ 0.593714] bus: 02 index 2 mmio: [0x70000000-0x700fffff] [ 0.593768] bus: 02 index 3 mmio: [0x0-0x0] [ 0.593834] NET: Registered protocol family 2 [ 0.594047] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.594578] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.596849] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 0.598011] TCP: Hash tables configured (established 131072 bind 65536) [ 0.598071] TCP reno registered [ 0.598303] NET: Registered protocol family 1 [ 0.598571] checking if image is initramfs... it is [ 1.096044] Switched to high resolution mode on CPU 0 [ 1.284187] Freeing initrd memory: 7944k freed [ 1.284421] cpufreq: No nForce2 chipset. [ 1.284668] audit: initializing netlink socket (disabled) [ 1.284750] type=2000 audit(1255183982.284:1): initialized [ 1.292732] highmem bounce pool size: 64 pages [ 1.292794] HugeTLB registered 4 MB page size, pre-allocated 0 pages [ 1.294357] VFS: Disk quotas dquot_6.5.1 [ 1.294475] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 1.295241] fuse init (API version 7.10) [ 1.295398] msgmni has been set to 1711 [ 1.295709] alg: No test for stdrng (krng) [ 1.295778] io scheduler noop registered [ 1.295831] io scheduler anticipatory registered [ 1.295884] io scheduler deadline registered [ 1.295952] io scheduler cfq registered (default) [ 1.296054] PCI: VIA PCI bridge detected.Disabling DAC. [ 1.296203] pci 0000:01:00.0: Boot video device [ 1.299653] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 1.299717] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 1.299947] input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0 [ 1.300035] ACPI: Power Button (FF) [PWRF] [ 1.300137] input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1 [ 1.300205] ACPI: Power Button (CM) [PWRB] [ 1.300303] input: Sleep Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2 [ 1.300375] ACPI: Sleep Button (CM) [SLPB] [ 1.300486] fan PNP0C0B:00: registered as cooling_device0 [ 1.300545] ACPI: Fan [FAN] (on) [ 1.300830] ACPI: CPU0 (power states: C1[C1] C2[C2]) [ 1.301012] processor ACPI_CPU:00: registered as cooling_device1 [ 1.303559] thermal LNXTHERM:01: registered as thermal_zone0 [ 1.304277] ACPI: Thermal Zone [THRM] (37 C) [ 1.304372] isapnp: Scanning for PnP cards... [ 1.658044] isapnp: No Plug & Play device found [ 1.659752] Serial: 8250/16550 driver4 ports, IRQ sharing enabled [ 1.659912] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 1.660070] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A [ 1.660401] 00:06: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 1.660574] 00:07: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A [ 1.661525] brd: module loaded [ 1.661968] loop: module loaded [ 1.662133] Fixed MDIO Bus: probed [ 1.662191] PPP generic driver version 2.4.2 [ 1.662320] input: Macintosh mouse button emulation as /devices/virtual/input/input3 [ 1.662442] Driver 'sd' needs updating - please use bus_type methods [ 1.662507] Driver 'sr' needs updating - please use bus_type methods [ 1.663138] pata_via 0000:00:11.1: version 0.3.3 [ 1.663582] ACPI: PCI Interrupt Link [ALKA] BIOS reported IRQ 0, using IRQ 20 [ 1.663641] ACPI: PCI Interrupt Link [ALKA] enabled at IRQ 20 [ 1.663708] pata_via 0000:00:11.1: PCI INT A -> Link[ALKA] -> GSI 20 (level, low) -> IRQ 20 [ 1.664129] scsi0 : pata_via [ 1.664330] scsi1 : pata_via [ 1.666263] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xe400 irq 14 [ 1.666322] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xe408 irq 15 [ 1.828370] ata1.00: ATAPI: SONY DVD RW DRU-530A, 2.1c, max UDMA/33 [ 1.844244] ata1.00: configured for UDMA/33 [ 2.011944] scsi 0:0:0:0: CD-ROM SONY DVD RW DRU-530A 2.1c PQ: 0 ANSI: 5 [ 2.014544] sr0: scsi3-mmc drive: 40x/40x writer cd/rw xa/form2 cdda tray [ 2.014604] Uniform CD-ROM driver Revision: 3.20 [ 2.014813] sr 0:0:0:0: Attached scsi CD-ROM sr0 [ 2.014893] sr 0:0:0:0: Attached scsi generic sg0 type 5 [ 2.015140] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 2.015599] ACPI: PCI Interrupt Link [ALKB] BIOS reported IRQ 0, using IRQ 21 [ 2.015658] ACPI: PCI Interrupt Link [ALKB] enabled at IRQ 21 [ 2.015722] ehci_hcd 0000:00:10.3: PCI INT D -> Link[ALKB] -> GSI 21 (level, low) -> IRQ 21 [ 2.015830] ehci_hcd 0000:00:10.3: EHCI Host Controller [ 2.015964] ehci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 1 [ 2.016140] ehci_hcd 0000:00:10.3: irq 21, io mem 0xef000000 [ 2.028013] ehci_hcd 0000:00:10.3: USB 2.0 started, EHCI 1.00 [ 2.028163] usb usb1: configuration #1 chosen from 1 choice [ 2.028251] hub 1-0:1.0: USB hub found [ 2.028316] hub 1-0:1.0: 6 ports detected [ 2.028519] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 2.028598] uhci_hcd: USB Universal Host Controller Interface driver [ 2.028721] uhci_hcd 0000:00:10.0: PCI INT A -> Link[ALKB] -> GSI 21 (level, low) -> IRQ 21 [ 2.028795] uhci_hcd 0000:00:10.0: UHCI Host Controller [ 2.028897] uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 2 [ 2.028986] uhci_hcd 0000:00:10.0: irq 21, io base 0x0000d800 [ 2.029149] usb usb2: configuration #1 chosen from 1 choice [ 2.029238] hub 2-0:1.0: USB hub found [ 2.029301] hub 2-0:1.0: 2 ports detected [ 2.029442] uhci_hcd 0000:00:10.1: PCI INT B -> Link[ALKB] -> GSI 21 (level, low) -> IRQ 21 [ 2.029515] uhci_hcd 0000:00:10.1: UHCI Host Controller [ 2.029613] uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 3 [ 2.029696] uhci_hcd 0000:00:10.1: irq 21, io base 0x0000dc00 [ 2.029845] usb usb3: configuration #1 chosen from 1 choice [ 2.029926] hub 3-0:1.0: USB hub found [ 2.029988] hub 3-0:1.0: 2 ports detected [ 2.030125] uhci_hcd 0000:00:10.2: PCI INT C -> Link[ALKB] -> GSI 21 (level, low) -> IRQ 21 [ 2.030196] uhci_hcd 0000:00:10.2: UHCI Host Controller [ 2.030308] uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 4 [ 2.030390] uhci_hcd 0000:00:10.2: irq 21, io base 0x0000e000 [ 2.030531] usb usb4: configuration #1 chosen from 1 choice [ 2.030612] hub 4-0:1.0: USB hub found [ 2.030673] hub 4-0:1.0: 2 ports detected [ 2.030868] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 2.031352] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 2.031413] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 2.031622] mice: PS/2 mouse device common for all mice [ 2.031846] rtc_cmos 00:03: RTC can wake from S4 [ 2.032628] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0 [ 2.032729] rtc0: alarms up to one year, y3k, 242 bytes nvram [ 2.032890] device-mapper: uevent: version 1.0.3 [ 2.033106] device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@redhat.com [ 2.033249] device-mapper: multipath: version 1.0.5 loaded [ 2.033305] device-mapper: multipath round-robin: version 1.0.0 loaded [ 2.033487] EISA: Probing bus 0 at eisa.0 [ 2.033560] Cannot allocate resource for EISA slot 4 [ 2.033614] Cannot allocate resource for EISA slot 5 [ 2.033678] EISA: Detected 0 cards. [ 2.033803] cpuidle: using governor ladder [ 2.033907] cpuidle: using governor menu [ 2.034531] TCP cubic registered [ 2.034689] NET: Registered protocol family 10 [ 2.035199] lo: Disabled Privacy Extensions [ 2.035599] NET: Registered protocol family 17 [ 2.035674] Bluetooth: L2CAP ver 2.11 [ 2.035726] Bluetooth: L2CAP socket layer initialized [ 2.035781] Bluetooth: SCO (Voice Link) ver 0.6 [ 2.035833] Bluetooth: SCO socket layer initialized [ 2.035933] Bluetooth: RFCOMM socket layer initialized [ 2.036025] Bluetooth: RFCOMM TTY layer initialized [ 2.036078] Bluetooth: RFCOMM ver 1.10 [ 2.036157] powernow-k8: Processor cpuid 681 not supported [ 2.036243] Using IPI No-Shortcut mode [ 2.036428] registered taskstats version 1 [ 2.036662] Magic number: 13:427:232 [ 2.036849] rtc_cmos 00:03: setting system clock to 2009-10-10 14:13:03 UTC (1255183983) [ 2.036918] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 2.036973] EDD information not available. [ 2.037962] Freeing unused kernel memory: 532k freed [ 2.038162] Write protecting the kernel text: 4116k [ 2.038265] Write protecting the kernel read-only data: 1528k [ 2.075735] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4 [ 2.223466] pata_hpt37x 0000:00:0e.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 2.227546] pata_hpt37x: bus clock 33MHz, using 50MHz DPLL. [ 2.227857] scsi2 : pata_hpt37x [ 2.228050] scsi3 : pata_hpt37x [ 2.228139] ata3: PATA max UDMA/100 cmd 0xb000 ctl 0xb400 bmdma 0xc000 irq 17 [ 2.228197] ata4: PATA max UDMA/100 cmd 0xb800 ctl 0xbc00 bmdma 0xc008 irq 17 [ 2.228279] Find mode for 8 reports AC1F48A [ 2.228336] Find mode for 8 reports AC1F48A [ 2.388002] Marking TSC unstable due to TSC halts in idle [ 2.440677] ata3.00: ATA-7: ST3750640A, 3.AAE, max UDMA/100 [ 2.440734] ata3.00: 1465149168 sectors, multi 16: LBA48 [ 2.440812] Find mode for 12 reports A81F442 [ 2.440870] Find mode for DMA 69 reports 12848242 [ 2.507199] ata3.00: configured for UDMA/100 [ 2.507274] Find mode for 8 reports AC1F48A [ 2.507331] Find mode for 8 reports AC1F48A [ 2.711460] ata4.00: ATA-7: ST3750640A, 3.AAE, max UDMA/100 [ 2.711516] ata4.00: 1465149168 sectors, multi 16: LBA48 [ 2.711590] Find mode for 12 reports A81F442 [ 2.711646] Find mode for DMA 69 reports 12848242 [ 2.777974] ata4.00: configured for UDMA/100 [ 2.778172] scsi 2:0:0:0: Direct-Access ATA ST3750640A 3.AA PQ: 0 ANSI: 5 [ 2.778370] sd 2:0:0:0: [sda] 1465149168 512-byte hardware sectors: (750 GB/698 GiB) [ 2.778457] sd 2:0:0:0: [sda] Write Protect is off [ 2.778512] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 2.778541] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.778701] sd 2:0:0:0: [sda] 1465149168 512-byte hardware sectors: (750 GB/698 GiB) [ 2.778781] sd 2:0:0:0: [sda] Write Protect is off [ 2.778836] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 2.778863] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.778934] sda: sda1 sda2 sda3 sda4 [ 2.806391] sd 2:0:0:0: [sda] Attached SCSI disk [ 2.806525] sd 2:0:0:0: Attached scsi generic sg1 type 0 [ 2.806688] scsi 3:0:0:0: Direct-Access ATA ST3750640A 3.AA PQ: 0 ANSI: 5 [ 2.806859] sd 3:0:0:0: [sdb] 1465149168 512-byte hardware sectors: (750 GB/698 GiB) [ 2.806943] sd 3:0:0:0: [sdb] Write Protect is off [ 2.806997] sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 2.807026] sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.807155] sd 3:0:0:0: [sdb] 1465149168 512-byte hardware sectors: (750 GB/698 GiB) [ 2.807236] sd 3:0:0:0: [sdb] Write Protect is off [ 2.807290] sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 2.807318] sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.807388] sdb: sdb1 sdb2 sdb3 sdb4 [ 2.829830] sd 3:0:0:0: [sdb] Attached SCSI disk [ 2.829943] sd 3:0:0:0: Attached scsi generic sg2 type 0 [ 2.830036] pata_hpt37x 0000:00:0e.1: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 2.834091] pata_hpt37x: bus clock 33MHz, using 50MHz DPLL. [ 2.834315] scsi4 : pata_hpt37x [ 2.834446] scsi5 : pata_hpt37x [ 2.834538] ata5: PATA max UDMA/100 cmd 0xc400 ctl 0xc800 bmdma 0xd400 irq 17 [ 2.834596] ata6: PATA max UDMA/100 cmd 0xcc00 ctl 0xd000 bmdma 0xd408 irq 17 [ 2.834679] Find mode for 8 reports AC1F48A [ 2.834735] Find mode for 8 reports AC1F48A [ 2.999318] Find mode for 8 reports AC1F48A [ 2.999375] Find mode for 8 reports AC1F48A [ 3.191621] md: linear personality registered for level -1 [ 3.195337] md: multipath personality registered for level -4 [ 3.198941] md: raid0 personality registered for level 0 [ 3.203955] md: raid1 personality registered for level 1 [ 3.207289] xor: automatically using best checksumming function: pIII_sse [ 3.224006] pIII_sse : 3978.000 MB/sec [ 3.224060] xor: using function: pIII_sse (3978.000 MB/sec) [ 3.225734] async_tx: api initialized (async) [ 3.300026] raid6: int32x1 841 MB/s [ 3.368028] raid6: int32x2 830 MB/s [ 3.436015] raid6: int32x4 701 MB/s [ 3.504036] raid6: int32x8 542 MB/s [ 3.572042] raid6: mmxx1 1594 MB/s [ 3.640019] raid6: mmxx2 2822 MB/s [ 3.708044] raid6: sse1x1 1550 MB/s [ 3.776021] raid6: sse1x2 2563 MB/s [ 3.776074] raid6: using algorithm sse1x2 (2563 MB/s) [ 3.776130] md: raid6 personality registered for level 6 [ 3.776184] md: raid5 personality registered for level 5 [ 3.776238] md: raid4 personality registered for level 4 [ 3.787250] md: raid10 personality registered for level 10 [ 3.907247] Linux Tulip driver version 1.1.15 (Feb 27, 2007) [ 3.907388] tulip 0000:02:04.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 3.914931] tulip0: EEPROM default media type Autosense. [ 3.914988] tulip0: Index #0 - Media 10baseT (#0) described by a 21140 non-MII (0) block. [ 3.915056] tulip0: Index #1 - Media 100baseTx (#3) described by a 21140 non-MII (0) block. [ 3.915844] tulip0: MII transceiver #1 config 3000 status 7809 advertising 01e1. [ 3.929947] eth0: Digital DS21140 Tulip rev 34 at Port 0xa000, 00:c0:95:e2:33:1c, IRQ 17. [ 3.930144] tulip 0000:02:05.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 3.937705] tulip1: EEPROM default media type Autosense. [ 3.937762] tulip1: Index #0 - Media 10baseT (#0) described by a 21140 non-MII (0) block. [ 3.937829] tulip1: Index #1 - Media 100baseTx (#3) described by a 21140 non-MII (0) block. [ 3.938617] tulip1: MII transceiver #1 config 3000 status 7829 advertising 01e1. [ 3.952237] eth1: Digital DS21140 Tulip rev 34 at Port 0xa400, 00:c0:95:e2:33:1d, IRQ 18. [ 3.952437] tulip 0000:02:06.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19 [ 3.959940] tulip2: EEPROM default media type Autosense. [ 3.960012] tulip2: Index #0 - Media 10baseT (#0) described by a 21140 non-MII (0) block. [ 3.960080] tulip2: Index #1 - Media 100baseTx (#3) described by a 21140 non-MII (0) block. [ 3.960867] tulip2: MII transceiver #1 config 3000 status 7829 advertising 01e1. [ 3.971176] eth2: Digital DS21140 Tulip rev 34 at Port 0xa800, 00:c0:95:e2:33:1e, IRQ 19. [ 3.971375] tulip 0000:02:07.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 3.978922] tulip3: EEPROM default media type Autosense. [ 3.978978] tulip3: Index #0 - Media 10baseT (#0) described by a 21140 non-MII (0) block. [ 3.979045] tulip3: Index #1 - Media 100baseTx (#3) described by a 21140 non-MII (0) block. [ 3.979836] tulip3: MII transceiver #1 config 3000 status 7809 advertising 01e1. [ 3.990354] eth3: Digital DS21140 Tulip rev 34 at Port 0xac00, 00:c0:95:e2:33:1f, IRQ 16. [ 4.108650] via-rhine.c:v1.10-LK1.4.3 2007-03-06 Written by Donald Becker [ 4.108721] via-rhine: Broken BIOS detected, avoid_D3 enabled. [ 4.109191] ACPI: PCI Interrupt Link [ALKD] BIOS reported IRQ 0, using IRQ 23 [ 4.109250] ACPI: PCI Interrupt Link [ALKD] enabled at IRQ 23 [ 4.109316] via-rhine 0000:00:12.0: PCI INT A -> Link[ALKD] -> GSI 23 (level, low) -> IRQ 23 [ 4.127025] eth4: VIA Rhine II at 0xef001000, 00:04:61:43:68:8c, IRQ 23. [ 4.127797] eth4: MII PHY found at address 1, status 0x786d advertising 05e1 Link 45e1. [ 4.231052] md: bind [ 4.267873] md: bind [ 4.269732] md: bind [ 4.306260] md: bind [ 4.307695] md: bind [ 4.332393] raid1: raid set md1 active with 2 out of 2 mirrors [ 4.334280] md: bind [ 4.349653] raid1: raid set md0 active with 2 out of 2 mirrors [ 4.374045] raid1: raid set md2 active with 2 out of 2 mirrors [ 4.579897] md0: [ 4.593715] md2: unknown partition table [ 4.606027] md1: unknown partition table [ 10.806117] PM: Starting manual resume from disk [ 10.806178] PM: Resume from partition 8:2 [ 10.806180] PM: Checking hibernation image. [ 10.806465] PM: Resume from disk failed. [ 10.837480] kjournald starting. Commit interval 5 seconds [ 10.837560] EXT3-fs: mounted filesystem with ordered data mode. [ 15.140537] udev: starting version 141 [ 15.317440] parport_pc 00:08: reported by Plug and Play ACPI [ 15.317620] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,EPP,ECP,DMA] [ 15.336099] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 15.356256] Linux agpgart interface v0.103 [ 15.363159] agpgart: Detected VIA KT266/KY266x/KT333 chipset [ 15.366556] agpgart-via 0000:00:00.0: AGP aperture is 32M @ 0xe8000000 [ 15.409303] udev: renamed network interface eth0_rename to eth1 [ 15.421308] udev: renamed network interface eth1_rename to eth2 [ 15.424683] udev: renamed network interface eth2_rename to eth3 [ 15.523836] udev: renamed network interface eth4 to eth0 [ 15.528273] udev: renamed network interface eth3_rename to eth4 [ 15.646061] irda_init() [ 15.646087] NET: Registered protocol family 23 [ 15.747363] input: PC Speaker as /devices/platform/pcspkr/input/input5 [ 15.871507] synaptics was reset on resume, see synaptics_resume_reset if you have trouble on resume [ 16.113394] ACPI: PCI Interrupt Link [ALKC] BIOS reported IRQ 0, using IRQ 22 [ 16.113461] ACPI: PCI Interrupt Link [ALKC] enabled at IRQ 22 [ 16.113527] VIA 82xx Audio 0000:00:11.5: PCI INT C -> Link[ALKC] -> GSI 22 (level, low) -> IRQ 22 [ 16.113759] VIA 82xx Audio 0000:00:11.5: setting latency timer to 64 [ 16.339662] psmouse serio1: ID: 10 00 64<6>input: PS2++ Logitech MX Mouse as /devices/platform/i8042/serio1/input/input6 [ 16.933703] ppdev: user-space parallel port driver [ 21.011648] lp0: using parport0 (interrupt-driven). [ 21.047677] w83627hf: Found W83697HF chip at 0x290 [ 21.155316] Adding 1959920k swap on /dev/sda2. Priority:-1 extents:1 across:1959920k [ 21.210550] Adding 1959920k swap on /dev/sdb2. Priority:-2 extents:1 across:1959920k [ 21.585415] EXT3 FS on dm-12, internal journal [ 24.879973] kjournald starting. Commit interval 5 seconds [ 24.911454] EXT3 FS on md0, internal journal [ 24.911462] EXT3-fs: mounted filesystem with ordered data mode. [ 24.977125] kjournald starting. Commit interval 5 seconds [ 24.993614] EXT3 FS on dm-15, internal journal [ 24.993621] EXT3-fs: mounted filesystem with ordered data mode. [ 25.048402] kjournald starting. Commit interval 5 seconds [ 25.052199] EXT3 FS on dm-13, internal journal [ 25.052206] EXT3-fs: mounted filesystem with ordered data mode. [ 25.088370] kjournald starting. Commit interval 5 seconds [ 25.092068] EXT3 FS on dm-22, internal journal [ 25.092075] EXT3-fs: mounted filesystem with ordered data mode. [ 25.186364] kjournald starting. Commit interval 5 seconds [ 25.188192] EXT3 FS on dm-21, internal journal [ 25.188199] EXT3-fs: mounted filesystem with ordered data mode. [ 25.230241] kjournald starting. Commit interval 5 seconds [ 25.230466] EXT3 FS on dm-25, internal journal [ 25.230473] EXT3-fs: mounted filesystem with ordered data mode. [ 25.245020] kjournald starting. Commit interval 5 seconds [ 25.271549] EXT3 FS on dm-23, internal journal [ 25.271556] EXT3-fs: mounted filesystem with ordered data mode. [ 25.316614] kjournald starting. Commit interval 5 seconds [ 25.320201] EXT3 FS on dm-16, internal journal [ 25.320208] EXT3-fs: mounted filesystem with ordered data mode. [ 25.365221] kjournald starting. Commit interval 5 seconds [ 25.365453] EXT3 FS on dm-14, internal journal [ 25.365460] EXT3-fs: mounted filesystem with ordered data mode. [ 25.405508] kjournald starting. Commit interval 5 seconds [ 25.405789] EXT3 FS on dm-18, internal journal [ 25.405797] EXT3-fs: mounted filesystem with ordered data mode. [ 25.440289] kjournald starting. Commit interval 5 seconds [ 25.440316] EXT3-fs: mounted filesystem with ordered data mode. [ 25.462124] kjournald starting. Commit interval 5 seconds [ 25.462420] EXT3 FS on dm-26, internal journal [ 25.462428] EXT3-fs: mounted filesystem with ordered data mode. [ 25.801225] type=1505 audit(1255184007.263:2): operation="profile_load" name="/usr/share/gdm/guest-session/Xsession" name2="default" pid=2575 [ 25.874429] type=1505 audit(1255184007.335:3): operation="profile_load" name="/sbin/dhclient-script" name2="default" pid=2585 [ 25.874793] type=1505 audit(1255184007.335:4): operation="profile_load" name="/sbin/dhclient3" name2="default" pid=2585 [ 25.874905] type=1505 audit(1255184007.335:5): operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" name2="default" pid=2585 [ 25.875001] type=1505 audit(1255184007.335:6): operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" name2="default" pid=2585 [ 25.926115] type=1505 audit(1255184007.387:7): operation="profile_load" name="/usr/bin/freshclam" name2="default" pid=2590 [ 26.298979] type=1505 audit(1255184007.759:8): operation="profile_load" name="/usr/sbin/clamd" name2="default" pid=2594 [ 26.504327] type=1505 audit(1255184007.967:9): operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" name2="default" pid=2598 [ 26.504808] type=1505 audit(1255184007.967:10): operation="profile_load" name="/usr/sbin/cupsd" name2="default" pid=2598 [ 26.563969] type=1505 audit(1255184008.023:11): operation="profile_load" name="/usr/sbin/dhcpd3" name2="default" pid=2602 [ 26.874207] eth0: link up, 100Mbps, full-duplex, lpa 0x45E1 [ 27.421060] ip_tables: (C) 2000-2006 Netfilter Core Team [ 27.602166] Netfilter messages via NETLINK v0.30. [ 27.633478] nf_conntrack version 0.5.0 (16384 buckets, 65536 max) [ 27.633862] CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use [ 27.633864] nf_conntrack.acct=1 kernel paramater, acct=1 nf_conntrack module option or [ 27.633867] sysctl net.netfilter.nf_conntrack_acct=1 to enable it. [ 27.896162] ctnetlink v0.93: registering with nfnetlink. [ 28.085625] ClusterIP Version 0.8 loaded successfully [ 29.828564] eth2: Setting full-duplex based on MII#1 link partner capability of 05e1. [ 30.064582] eth3: Setting full-duplex based on MII#1 link partner capability of 05e1. [ 32.092065] ip6_tables: (C) 2000-2006 Netfilter Core Team [ 36.984739] tun: Universal TUN/TAP device driver, 1.6 [ 36.984746] tun: (C) 1999-2004 Max Krasnyansky [ 36.988319] tun1: Disabled Privacy Extensions [ 37.048033] eth0: no IPv6 routers present [ 37.532035] eth3: no IPv6 routers present [ 37.804036] eth2: no IPv6 routers present [ 38.278473] tun0: Disabled Privacy Extensions [ 59.317608] warning: `dhcpd3' uses 32-bit capabilities (legacy support in use)