[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.31-14-generic (buildd@rothera) (gcc version 4.4.1 (Ubuntu 4.4.1-4ubuntu8) ) #48-Ubuntu SMP Fri Oct 16 14:04:26 UTC 2009 (Ubuntu 2.6.31-14.48-generic) [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] NSC Geode by NSC [ 0.000000] Cyrix CyrixInstead [ 0.000000] Centaur CentaurHauls [ 0.000000] Transmeta GenuineTMx86 [ 0.000000] Transmeta TransmetaCPU [ 0.000000] UMC UMC UMC UMC [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) [ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000003ffd0000 (usable) [ 0.000000] BIOS-e820: 000000003ffd0000 - 000000003ffdf000 (ACPI data) [ 0.000000] BIOS-e820: 000000003ffdf000 - 0000000040000000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000ff780000 - 0000000100000000 (reserved) [ 0.000000] DMI 2.3 present. [ 0.000000] AMI BIOS detected: BIOS may corrupt low RAM, working around it. [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) [ 0.000000] last_pfn = 0x3ffd0 max_arch_pfn = 0x100000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-EFFFF uncachable [ 0.000000] F0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 0000000000 mask FFC0000000 write-back [ 0.000000] 1 disabled [ 0.000000] 2 disabled [ 0.000000] 3 disabled [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] Scanning 0 areas for low memory corruption [ 0.000000] modified physical RAM map: [ 0.000000] modified: 0000000000000000 - 0000000000010000 (reserved) [ 0.000000] modified: 0000000000010000 - 000000000009fc00 (usable) [ 0.000000] modified: 000000000009fc00 - 00000000000a0000 (reserved) [ 0.000000] modified: 00000000000e0000 - 0000000000100000 (reserved) [ 0.000000] modified: 0000000000100000 - 000000003ffd0000 (usable) [ 0.000000] modified: 000000003ffd0000 - 000000003ffdf000 (ACPI data) [ 0.000000] modified: 000000003ffdf000 - 0000000040000000 (ACPI NVS) [ 0.000000] modified: 00000000ff780000 - 0000000100000000 (reserved) [ 0.000000] initial memory mapped : 0 - 00c00000 [ 0.000000] init_memory_mapping: 0000000000000000-00000000377fe000 [ 0.000000] Using x86 segment limits to approximate NX protection [ 0.000000] 0000000000 - 0000400000 page 4k [ 0.000000] 0000400000 - 0037400000 page 2M [ 0.000000] 0037400000 - 00377fe000 page 4k [ 0.000000] kernel direct mapping tables up to 377fe000 @ 10000-15000 [ 0.000000] RAMDISK: 2f8d2000 - 3001bce9 [ 0.000000] ACPI: RSDP 000fa7f0 00021 (v02 ACPIAM) [ 0.000000] ACPI: XSDT 3ffd0100 0003C (v01 A M I OEMXSDT 08000617 MSFT 00000097) [ 0.000000] ACPI: FACP 3ffd0290 000F4 (v03 A M I OEMFACP 08000617 MSFT 00000097) [ 0.000000] ACPI: DSDT 3ffd03f0 03F45 (v01 A0158 A0158000 00000000 INTL 02002026) [ 0.000000] ACPI: FACS 3ffdf000 00040 [ 0.000000] ACPI: APIC 3ffd0390 00054 (v01 A M I OEMAPIC 08000617 MSFT 00000097) [ 0.000000] ACPI: OEMB 3ffdf040 00040 (v01 A M I AMI_OEM 08000617 MSFT 00000097) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] 135MB HIGHMEM available. [ 0.000000] 887MB LOWMEM available. [ 0.000000] mapped low ram: 0 - 377fe000 [ 0.000000] low ram: 0 - 377fe000 [ 0.000000] node 0 low ram: 00000000 - 377fe000 [ 0.000000] node 0 bootmap 00011000 - 00017f00 [ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 00377fe000] [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] [ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000] [ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000] [ 0.000000] #3 [0000100000 - 00008a80a0] TEXT DATA BSS ==> [0000100000 - 00008a80a0] [ 0.000000] #4 [002f8d2000 - 003001bce9] RAMDISK ==> [002f8d2000 - 003001bce9] [ 0.000000] #5 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 0000100000] [ 0.000000] #6 [00008a9000 - 00008ac20c] BRK ==> [00008a9000 - 00008ac20c] [ 0.000000] #7 [0000010000 - 0000011000] PGTABLE ==> [0000010000 - 0000011000] [ 0.000000] #8 [0000011000 - 0000018000] BOOTMAP ==> [0000011000 - 0000018000] [ 0.000000] found SMP MP-table at [c00ff780] ff780 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000010 -> 0x00001000 [ 0.000000] Normal 0x00001000 -> 0x000377fe [ 0.000000] HighMem 0x000377fe -> 0x0003ffd0 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[2] active PFN ranges [ 0.000000] 0: 0x00000010 -> 0x0000009f [ 0.000000] 0: 0x00000100 -> 0x0003ffd0 [ 0.000000] On node 0 totalpages: 261983 [ 0.000000] free_area_init_node: node 0, pgdat c0784900, node_mem_map c1000200 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 3951 pages, LIFO batch:0 [ 0.000000] Normal zone: 1744 pages used for memmap [ 0.000000] Normal zone: 221486 pages, LIFO batch:31 [ 0.000000] HighMem zone: 272 pages used for memmap [ 0.000000] HighMem zone: 34498 pages, LIFO batch:7 [ 0.000000] Using APIC driver default [ 0.000000] ACPI: PM-Timer IO Port: 0x808 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 1, version 17, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] SMP: Allowing 1 CPUs, 0 hotplug CPUs [ 0.000000] nr_irqs_gsi: 24 [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000 [ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000 [ 0.000000] Allocating PCI resources starting at 40000000 (gap: 40000000:bf780000) [ 0.000000] NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:1 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 14 pages at c1805000, static data 35612 bytes [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 259935 [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.31-14-generic root=UUID=04b517bb-26d7-4676-a9db-545d38ad1bb3 ro quiet splash [ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Enabling fast FPU save and restore... done. [ 0.000000] Enabling unmasked SIMD FPU exception support... done. [ 0.000000] Initializing CPU#0 [ 0.000000] allocated 5241600 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] Initializing HighMem for node 0 (000377fe:0003ffd0) [ 0.000000] Memory: 1018024k/1048384k available (4565k kernel code, 29524k reserved, 2143k data, 540k init, 139080k highmem) [ 0.000000] virtual kernel memory layout: [ 0.000000] fixmap : 0xfff1d000 - 0xfffff000 ( 904 kB) [ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB) [ 0.000000] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB) [ 0.000000] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB) [ 0.000000] .init : 0xc078e000 - 0xc0815000 ( 540 kB) [ 0.000000] .data : 0xc0575554 - 0xc078d308 (2143 kB) [ 0.000000] .text : 0xc0100000 - 0xc0575554 (4565 kB) [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.000000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.000000] NR_IRQS:2304 nr_irqs:256 [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 1999.893 MHz processor. [ 0.000009] spurious 8259A interrupt: IRQ7. [ 0.001680] Console: colour VGA+ 80x25 [ 0.001683] console [tty0] enabled [ 0.001731] Calibrating delay loop (skipped), value calculated using timer frequency.. 3999.78 BogoMIPS (lpj=7999572) [ 0.001752] Security Framework initialized [ 0.001773] AppArmor: AppArmor initialized [ 0.001780] Mount-cache hash table entries: 512 [ 0.001897] Initializing cgroup subsys ns [ 0.001901] Initializing cgroup subsys cpuacct [ 0.001905] Initializing cgroup subsys memory [ 0.001912] Initializing cgroup subsys freezer [ 0.001915] Initializing cgroup subsys net_cls [ 0.001926] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 0.001929] CPU: L2 Cache: 128K (64 bytes/line) [ 0.001933] mce: CPU supports 5 MCE banks [ 0.001948] Performance Counters: AMD PMU driver. [ 0.001954] ... version: 0 [ 0.001956] ... bit width: 48 [ 0.001958] ... generic counters: 4 [ 0.001960] ... value mask: 0000ffffffffffff [ 0.001962] ... max period: 00007fffffffffff [ 0.001964] ... fixed-purpose counters: 0 [ 0.001966] ... counter mask: 000000000000000f [ 0.001969] Checking 'hlt' instruction... OK. [ 0.016576] SMP alternatives: switching to UP code [ 0.021777] Freeing SMP alternatives: 19k freed [ 0.021796] ACPI: Core revision 20090521 [ 0.027438] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.067125] CPU0: AMD Sempron(tm) Processor 3300+ stepping 02 [ 0.068001] Brought up 1 CPUs [ 0.068001] Total of 1 processors activated (3999.78 BogoMIPS). [ 0.068001] CPU0 attaching NULL sched-domain. [ 0.068001] Booting paravirtualized kernel on bare hardware [ 0.068001] regulator: core version 0.5 [ 0.068001] Time: 13:26:11 Date: 11/10/09 [ 0.068001] NET: Registered protocol family 16 [ 0.068001] EISA bus registered [ 0.068001] ACPI: bus type pci registered [ 0.068001] PCI: PCI BIOS revision 2.10 entry at 0xf0031, last bus=2 [ 0.068001] PCI: Using configuration type 1 for base access [ 0.068001] bio: create slab at 0 [ 0.068001] ACPI: EC: Look up EC in DSDT [ 0.072299] ACPI: Interpreter enabled [ 0.072305] ACPI: (supports S0 S1 S3 S4 S5) [ 0.072327] ACPI: Using IOAPIC for interrupt routing [ 0.078773] ACPI Warning: Incorrect checksum in table [OEMB] - E0, should be D7 20090521 tbutils-246 [ 0.078847] ACPI: No dock devices found. [ 0.078942] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 0.078988] pci 0000:00:00.0: reg 10 32bit mmio: [0xe8000000-0xefffffff] [ 0.079141] pci 0000:00:03.1: quirk: region 0800-083f claimed by ali7101 ACPI [ 0.079174] pci 0000:00:04.0: reg 10 io port: [0xc800-0xc8ff] [ 0.079179] pci 0000:00:04.0: reg 14 32bit mmio: [0xf9fff000-0xf9ffffff] [ 0.079207] pci 0000:00:04.0: supports D1 D2 [ 0.079210] pci 0000:00:04.0: PME# supported from D2 D3hot D3cold [ 0.079214] pci 0000:00:04.0: PME# disabled [ 0.079238] pci 0000:00:0d.0: reg 10 io port: [0xc400-0xc4ff] [ 0.079243] pci 0000:00:0d.0: reg 14 32bit mmio: [0xf9ffec00-0xf9ffecff] [ 0.079262] pci 0000:00:0d.0: PME# supported from D3hot D3cold [ 0.079265] pci 0000:00:0d.0: PME# disabled [ 0.079289] pci 0000:00:0e.0: reg 20 io port: [0xff00-0xff0f] [ 0.079314] pci 0000:00:0f.0: reg 10 32bit mmio: [0xf9ff7000-0xf9ff7fff] [ 0.079340] pci 0000:00:0f.1: reg 10 32bit mmio: [0xf9ffc000-0xf9ffcfff] [ 0.079365] pci 0000:00:0f.2: reg 10 32bit mmio: [0xf9ffd000-0xf9ffdfff] [ 0.079397] pci 0000:00:0f.3: reg 10 32bit mmio: [0xf9ffe800-0xf9ffe8ff] [ 0.079420] pci 0000:00:0f.3: PME# supported from D0 D3hot D3cold [ 0.079423] pci 0000:00:0f.3: PME# disabled [ 0.079519] pci 0000:01:00.0: reg 10 32bit mmio: [0xfa000000-0xfaffffff] [ 0.079525] pci 0000:01:00.0: reg 14 32bit mmio: [0xf0000000-0xf7ffffff] [ 0.079539] pci 0000:01:00.0: reg 30 32bit mmio: [0xfbee0000-0xfbefffff] [ 0.079579] pci 0000:00:01.0: bridge io port: [0xd000-0xdfff] [ 0.079582] pci 0000:00:01.0: bridge 32bit mmio: [0xfa000000-0xfbefffff] [ 0.079587] pci 0000:00:01.0: bridge 32bit mmio pref: [0xf0000000-0xf8ffffff] [ 0.079618] pci 0000:02:07.0: reg 10 32bit mmio: [0xfbfff800-0xfbffffff] [ 0.079649] pci 0000:02:07.0: supports D1 D2 [ 0.079675] pci 0000:00:02.0: bridge io port: [0xe000-0xefff] [ 0.079679] pci 0000:00:02.0: bridge 32bit mmio: [0xfbf00000-0xfbffffff] [ 0.079690] pci_bus 0000:00: on NUMA node 0 [ 0.079694] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.079764] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT] [ 0.079803] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HTT_._PRT] [ 0.086412] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *10 11 12 14 15) [ 0.086556] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 10 11 12 14 15) [ 0.086695] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 *11 12 14 15) [ 0.086831] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 *11 12 14 15), disabled. [ 0.086971] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 *10 11 12 14 15) [ 0.087110] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 *7 10 11 12 14 15) [ 0.087249] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 *11 12 14 15) [ 0.087389] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 11 12 14 15) *9 [ 0.087528] ACPI: PCI Interrupt Link [LNKP] (IRQs *3 4 5 6 7 10 11 12 14 15) [ 0.087702] SCSI subsystem initialized [ 0.087768] libata version 3.00 loaded. [ 0.087839] usbcore: registered new interface driver usbfs [ 0.087855] usbcore: registered new interface driver hub [ 0.087876] usbcore: registered new device driver usb [ 0.087994] ACPI: WMI: Mapper loaded [ 0.087996] PCI: Using ACPI for IRQ routing [ 0.088139] Bluetooth: Core ver 2.15 [ 0.088174] NET: Registered protocol family 31 [ 0.088176] Bluetooth: HCI device and connection manager initialized [ 0.088179] Bluetooth: HCI socket layer initialized [ 0.088181] NetLabel: Initializing [ 0.088183] NetLabel: domain hash size = 128 [ 0.088184] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.088198] NetLabel: unlabeled traffic allowed by default [ 0.089743] pnp: PnP ACPI init [ 0.089766] ACPI: bus type pnp registered [ 0.093833] pnp: PnP ACPI: found 13 devices [ 0.093836] ACPI: ACPI bus type pnp unregistered [ 0.093840] PnPBIOS: Disabled by ACPI PNP [ 0.093854] system 00:09: ioport range 0xc00-0xc0f has been reserved [ 0.093857] system 00:09: ioport range 0xd00-0xd0f has been reserved [ 0.093860] system 00:09: ioport range 0xa20-0xa2f has been reserved [ 0.093863] system 00:09: ioport range 0xa30-0xa3f has been reserved [ 0.093869] system 00:0a: ioport range 0x400-0x40f has been reserved [ 0.093872] system 00:0a: ioport range 0x480-0x48f has been reserved [ 0.093875] system 00:0a: ioport range 0x4d0-0x4d1 has been reserved [ 0.093878] system 00:0a: ioport range 0x800-0x87f could not be reserved [ 0.093882] system 00:0a: iomem range 0xfff80000-0xffffffff has been reserved [ 0.093886] system 00:0a: iomem range 0xffb00000-0xffbbffff has been reserved [ 0.093891] system 00:0b: iomem range 0xffbc0000-0xffbfffff has been reserved [ 0.093894] system 00:0b: iomem range 0xfec00000-0xfec00fff could not be reserved [ 0.093898] system 00:0b: iomem range 0xfee00000-0xfee00fff has been reserved [ 0.093903] system 00:0c: iomem range 0x0-0x9ffff could not be reserved [ 0.093906] system 00:0c: iomem range 0xc0000-0xdffff could not be reserved [ 0.093910] system 00:0c: iomem range 0xe0000-0xfffff could not be reserved [ 0.093913] system 00:0c: iomem range 0x100000-0x3fffffff could not be reserved [ 0.128563] AppArmor: AppArmor Filesystem Enabled [ 0.128586] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01 [ 0.128590] pci 0000:00:01.0: IO window: 0xd000-0xdfff [ 0.128595] pci 0000:00:01.0: MEM window: 0xfa000000-0xfbefffff [ 0.128599] pci 0000:00:01.0: PREFETCH window: 0xf0000000-0xf8ffffff [ 0.128604] pci 0000:00:02.0: PCI bridge, secondary bus 0000:02 [ 0.128607] pci 0000:00:02.0: IO window: 0xe000-0xefff [ 0.128612] pci 0000:00:02.0: MEM window: 0xfbf00000-0xfbffffff [ 0.128615] pci 0000:00:02.0: PREFETCH window: disabled [ 0.128624] pci 0000:00:01.0: setting latency timer to 64 [ 0.128630] pci 0000:00:02.0: setting latency timer to 64 [ 0.128635] pci_bus 0000:00: resource 0 io: [0x00-0xffff] [ 0.128638] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff] [ 0.128641] pci_bus 0000:01: resource 0 io: [0xd000-0xdfff] [ 0.128644] pci_bus 0000:01: resource 1 mem: [0xfa000000-0xfbefffff] [ 0.128647] pci_bus 0000:01: resource 2 pref mem [0xf0000000-0xf8ffffff] [ 0.128650] pci_bus 0000:02: resource 0 io: [0xe000-0xefff] [ 0.128652] pci_bus 0000:02: resource 1 mem: [0xfbf00000-0xfbffffff] [ 0.128693] NET: Registered protocol family 2 [ 0.128780] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.129121] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.129904] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 0.130296] TCP: Hash tables configured (established 131072 bind 65536) [ 0.130299] TCP reno registered [ 0.130390] NET: Registered protocol family 1 [ 0.130455] Trying to unpack rootfs image as initramfs... [ 0.340134] Freeing initrd memory: 7463k freed [ 0.345947] cpufreq-nforce2: No nForce2 chipset. [ 0.345972] Scanning for low memory corruption every 60 seconds [ 0.346074] audit: initializing netlink socket (disabled) [ 0.346096] type=2000 audit(1257859571.344:1): initialized [ 0.355141] highmem bounce pool size: 64 pages [ 0.355146] HugeTLB registered 4 MB page size, pre-allocated 0 pages [ 0.356448] VFS: Disk quotas dquot_6.5.2 [ 0.356512] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.357059] fuse init (API version 7.12) [ 0.357138] msgmni has been set to 1732 [ 0.357336] alg: No test for stdrng (krng) [ 0.357349] io scheduler noop registered [ 0.357351] io scheduler anticipatory registered [ 0.357353] io scheduler deadline registered [ 0.357412] io scheduler cfq registered (default) [ 0.416044] pci 0000:01:00.0: Boot video device [ 0.416140] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.416161] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 0.416274] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0 [ 0.416278] ACPI: Power Button [PWRF] [ 0.416327] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1 [ 0.416330] ACPI: Power Button [PWRB] [ 0.416771] processor LNXCPU:00: registered as cooling_device0 [ 0.420199] isapnp: Scanning for PnP cards... [ 0.644047] Switched to high resolution mode on CPU 0 [ 0.773593] isapnp: No Plug & Play device found [ 0.774616] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.774713] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 0.774983] 00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 0.775924] brd: module loaded [ 0.776373] loop: module loaded [ 0.776460] input: Macintosh mouse button emulation as /devices/virtual/input/input2 [ 0.776698] alloc irq_desc for 19 on node -1 [ 0.776701] alloc kstat_irqs on node -1 [ 0.776708] pata_ali 0000:00:0e.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19 [ 0.776847] scsi0 : pata_ali [ 0.776939] scsi1 : pata_ali [ 0.778336] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xff00 irq 14 [ 0.778340] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xff08 irq 15 [ 0.778992] Fixed MDIO Bus: probed [ 0.779024] PPP generic driver version 2.4.2 [ 0.779119] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.779143] alloc irq_desc for 23 on node -1 [ 0.779146] alloc kstat_irqs on node -1 [ 0.779155] ehci_hcd 0000:00:0f.3: PCI INT D -> GSI 23 (level, low) -> IRQ 23 [ 0.779171] ehci_hcd 0000:00:0f.3: EHCI Host Controller [ 0.779227] ehci_hcd 0000:00:0f.3: new USB bus registered, assigned bus number 1 [ 0.800018] ehci_hcd 0000:00:0f.3: debug port 1 [ 0.800046] ehci_hcd 0000:00:0f.3: irq 23, io mem 0xf9ffe800 [ 0.812006] ehci_hcd 0000:00:0f.3: USB 2.0 started, EHCI 1.00 [ 0.812088] usb usb1: configuration #1 chosen from 1 choice [ 0.812116] hub 1-0:1.0: USB hub found [ 0.812125] hub 1-0:1.0: 8 ports detected [ 0.812193] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.812217] alloc irq_desc for 20 on node -1 [ 0.812219] alloc kstat_irqs on node -1 [ 0.812225] ohci_hcd 0000:00:0f.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 [ 0.812239] ohci_hcd 0000:00:0f.0: OHCI Host Controller [ 0.812278] ohci_hcd 0000:00:0f.0: new USB bus registered, assigned bus number 2 [ 0.812311] ohci_hcd 0000:00:0f.0: irq 20, io mem 0xf9ff7000 [ 0.870070] usb usb2: configuration #1 chosen from 1 choice [ 0.870099] hub 2-0:1.0: USB hub found [ 0.870114] hub 2-0:1.0: 3 ports detected [ 0.870157] alloc irq_desc for 21 on node -1 [ 0.870160] alloc kstat_irqs on node -1 [ 0.870165] ohci_hcd 0000:00:0f.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 [ 0.870174] ohci_hcd 0000:00:0f.1: OHCI Host Controller [ 0.870211] ohci_hcd 0000:00:0f.1: new USB bus registered, assigned bus number 3 [ 0.870240] ohci_hcd 0000:00:0f.1: irq 21, io mem 0xf9ffc000 [ 0.926054] usb usb3: configuration #1 chosen from 1 choice [ 0.926084] hub 3-0:1.0: USB hub found [ 0.926092] hub 3-0:1.0: 3 ports detected [ 0.926136] alloc irq_desc for 22 on node -1 [ 0.926138] alloc kstat_irqs on node -1 [ 0.926147] ohci_hcd 0000:00:0f.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22 [ 0.926156] ohci_hcd 0000:00:0f.2: OHCI Host Controller [ 0.926190] ohci_hcd 0000:00:0f.2: new USB bus registered, assigned bus number 4 [ 0.926221] ohci_hcd 0000:00:0f.2: irq 22, io mem 0xf9ffd000 [ 0.940248] ata1.00: ATA-4: FUJITSU MPE3136AH, EH-A2-25, max UDMA/66 [ 0.940251] ata1.00: 26679688 sectors, multi 16: LBA [ 0.956150] ata1.00: configured for UDMA/66 [ 0.956257] scsi 0:0:0:0: Direct-Access ATA FUJITSU MPE3136A EH-A PQ: 0 ANSI: 5 [ 0.956383] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 0.956421] sd 0:0:0:0: [sda] 26679688 512-byte logical blocks: (13.6 GB/12.7 GiB) [ 0.956462] sd 0:0:0:0: [sda] Write Protect is off [ 0.956465] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 0.956486] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 0.956604] sda: sda1 sda2 < [ 0.982085] usb usb4: configuration #1 chosen from 1 choice [ 0.982115] hub 4-0:1.0: USB hub found [ 0.982125] hub 4-0:1.0: 3 ports detected [ 0.982182] uhci_hcd: USB Universal Host Controller Interface driver [ 0.982272] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12 [ 0.984478] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.984484] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 0.984546] mice: PS/2 mouse device common for all mice [ 0.984630] rtc_cmos 00:02: RTC can wake from S4 [ 0.984661] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0 [ 0.984690] rtc0: alarms up to one month, 114 bytes nvram [ 0.984795] device-mapper: uevent: version 1.0.3 [ 0.984903] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com [ 0.984980] device-mapper: multipath: version 1.1.0 loaded [ 0.984982] device-mapper: multipath round-robin: version 1.0.0 loaded [ 0.985120] EISA: Probing bus 0 at eisa.0 [ 0.985140] Cannot allocate resource for EISA slot 5 [ 0.985152] EISA: Detected 0 cards. [ 0.985197] cpuidle: using governor ladder [ 0.985200] cpuidle: using governor menu [ 0.985690] TCP cubic registered [ 0.985854] NET: Registered protocol family 10 [ 0.986306] lo: Disabled Privacy Extensions [ 0.986603] NET: Registered protocol family 17 [ 0.986629] Bluetooth: L2CAP ver 2.13 [ 0.986630] Bluetooth: L2CAP socket layer initialized [ 0.986633] Bluetooth: SCO (Voice Link) ver 0.6 [ 0.986635] Bluetooth: SCO socket layer initialized [ 0.986650] sda5 > [ 0.986941] sd 0:0:0:0: [sda] Attached SCSI disk [ 0.986985] Bluetooth: RFCOMM TTY layer initialized [ 0.986988] Bluetooth: RFCOMM socket layer initialized [ 0.986990] Bluetooth: RFCOMM ver 1.11 [ 0.987000] powernow-k8: Found 1 AMD Sempron(tm) Processor 3300+ processors (1 cpu cores) (version 2.20.00) [ 0.987036] powernow-k8: 0 : fid 0xc (2000 MHz), vid 0x6 [ 0.987039] powernow-k8: 1 : fid 0xa (1800 MHz), vid 0x8 [ 0.987041] powernow-k8: 2 : fid 0x2 (1000 MHz), vid 0x12 [ 0.987343] Using IPI No-Shortcut mode [ 0.987419] PM: Resume from disk failed. [ 0.987430] registered taskstats version 1 [ 0.987523] Magic number: 1:534:432 [ 0.987590] rtc_cmos 00:02: setting system clock to 2009-11-10 13:26:12 UTC (1257859572) [ 0.987593] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 0.987595] EDD information not available. [ 1.001517] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3 [ 1.112151] ata2.01: NODEV after polling detection [ 1.120342] ata2.00: ATAPI: PHILIPS PCRW5232P, P2.2, max UDMA/33 [ 1.120361] ata2.00: WARNING: ATAPI DMA disabled for reliablity issues. It can be enabled [ 1.120363] ata2.00: WARNING: via pata_ali.atapi_dma modparam or corresponding sysfs node. [ 1.136318] ata2.00: configured for UDMA/33 [ 1.137746] scsi 1:0:0:0: CD-ROM PHILIPS PCRW5232P P2.2 PQ: 0 ANSI: 5 [ 1.142381] sr0: scsi3-mmc drive: 52x/52x writer cd/rw xa/form2 cdda tray [ 1.142384] Uniform CD-ROM driver Revision: 3.20 [ 1.142480] sr 1:0:0:0: Attached scsi CD-ROM sr0 [ 1.142538] sr 1:0:0:0: Attached scsi generic sg1 type 5 [ 1.142565] Freeing unused kernel memory: 540k freed [ 1.143017] Write protecting the kernel text: 4568k [ 1.143048] Write protecting the kernel read-only data: 1836k [ 1.353046] Linux agpgart interface v0.103 [ 1.354978] agpgart-ali 0000:00:00.0: unsupported ALi chipset [10b9/1689]) [ 1.357950] agpgart-amd64 0000:00:00.0: AGP bridge [10b9/1689] [ 1.357978] agpgart-amd64 0000:00:00.0: aperture size 4096 MB is not right, using settings from NB [ 1.357983] agpgart-amd64 0000:00:00.0: setting up ULi AGP [ 1.361584] agpgart-amd64 0000:00:00.0: AGP aperture is 128M @ 0xe8000000 [ 1.363837] Floppy drive(s): fd0 is 1.44M [ 1.384090] FDC 0 is a post-1991 82077 [ 2.741977] PM: Starting manual resume from disk [ 2.741983] PM: Resume from partition 8:5 [ 2.741985] PM: Checking hibernation image. [ 2.742363] PM: Resume from disk failed. [ 2.765665] EXT4-fs (sda1): barriers enabled [ 2.787698] kjournald2 starting: pid 348, dev sda1:8, commit interval 5 seconds [ 2.787717] EXT4-fs (sda1): delayed allocation enabled [ 2.787720] EXT4-fs: file extents enabled [ 2.789137] EXT4-fs: mballoc enabled [ 2.789153] EXT4-fs (sda1): mounted filesystem with ordered data mode [ 3.626342] type=1505 audit(1257859575.136:2): operation="profile_load" pid=371 name=/usr/share/gdm/guest-session/Xsession [ 3.629626] type=1505 audit(1257859575.140:3): operation="profile_load" pid=372 name=/sbin/dhclient3 [ 3.629928] type=1505 audit(1257859575.140:4): operation="profile_load" pid=372 name=/usr/lib/NetworkManager/nm-dhcp-client.action [ 3.630095] type=1505 audit(1257859575.140:5): operation="profile_load" pid=372 name=/usr/lib/connman/scripts/dhclient-script [ 3.673322] type=1505 audit(1257859575.184:6): operation="profile_load" pid=373 name=/usr/bin/evince [ 3.678231] type=1505 audit(1257859575.188:7): operation="profile_load" pid=373 name=/usr/bin/evince-previewer [ 3.681214] type=1505 audit(1257859575.192:8): operation="profile_load" pid=373 name=/usr/bin/evince-thumbnailer [ 3.715523] type=1505 audit(1257859575.224:9): operation="profile_load" pid=375 name=/usr/lib/cups/backend/cups-pdf [ 3.715907] type=1505 audit(1257859575.224:10): operation="profile_load" pid=375 name=/usr/sbin/cupsd [ 5.101020] Adding 610428k swap on /dev/sda5. Priority:-1 extents:1 across:610428k [ 5.503933] udev: starting version 147 [ 6.067098] EXT4-fs (sda1): internal journal on sda1:8 [ 6.229195] uli526x: ULi M5261/M5263 net driver, version 0.9.3 (2005-7-29) [ 6.229234] alloc irq_desc for 17 on node -1 [ 6.229237] alloc kstat_irqs on node -1 [ 6.229244] uli526x 0000:00:0d.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 6.251361] eth0: ULi M5263 at pci0000:00:0d.0, 00:15:f2:38:99:95, irq 17. [ 6.389943] ip_tables: (C) 2000-2006 Netfilter Core Team [ 6.410045] ali1535_smbus 0000:00:03.1: ALI1535_smb region uninitialized - upgrade BIOS? [ 6.410049] ali1535_smbus 0000:00:03.1: ALI1535 not detected, module not inserted. [ 6.412162] ali15x3_smbus 0000:00:03.1: ALI15X3_smb region uninitialized - upgrade BIOS or use force_addr=0xaddr [ 6.412167] ali15x3_smbus 0000:00:03.1: ALI15X3 not detected, module not inserted. [ 6.414334] ali1563_smbus 0000:00:03.0: Found ALi1563 SMBus at 0x0400 [ 6.752094] psmouse serio1: ID: 10 00 64 [ 7.244738] alloc irq_desc for 18 on node -1 [ 7.244742] alloc kstat_irqs on node -1 [ 7.244749] Intel ICH 0000:00:04.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 7.301175] input: ImPS/2 Generic Wheel Mouse as /devices/platform/i8042/serio1/input/input4 [ 7.368242] AC'97 0 analog subsections not ready [ 7.432024] intel8x0_measure_ac97_clock: measured 54476 usecs (2624 samples) [ 7.432028] intel8x0: clocking to 48000 [ 8.074272] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 8.550820] nvidia: module license 'NVIDIA' taints kernel. [ 8.550825] Disabling lock debugging due to kernel taint [ 8.806982] alloc irq_desc for 16 on node -1 [ 8.806986] alloc kstat_irqs on node -1 [ 8.806993] nvidia 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 8.807271] NVRM: loading NVIDIA UNIX x86 Kernel Module 173.14.20 Thu Jun 25 19:23:24 PDT 2009 [ 8.837148] Linux video capture interface: v2.00 [ 8.929648] saa7130/34: v4l2 driver version 0.2.15 loaded [ 8.929699] saa7134 0000:02:07.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 [ 8.929706] saa7133[0]: found at 0000:02:07.0, rev: 209, irq: 20, latency: 64, mmio: 0xfbfff800 [ 8.929712] saa7133[0]: subsystem: 1043:4876, board: ASUSTeK P7131 Hybrid [card=112,insmod option] [ 8.929730] saa7133[0]: board init: gpio is 40000 [ 8.929809] input: saa7134 IR (ASUSTeK P7131 Hybri as /devices/pci0000:00/0000:00:02.0/0000:02:07.0/input/input5 [ 8.929851] IRQ 20/saa7133[0]: IRQF_DISABLED is not guaranteed on shared IRQs [ 8.962394] lp: driver loaded but no devices found [ 9.080027] saa7133[0]: i2c eeprom 00: 43 10 76 48 54 20 1c 00 43 43 a9 1c 55 d2 b2 92 [ 9.080038] saa7133[0]: i2c eeprom 10: ff ff ff 0f ff 20 ff ff ff ff ff ff ff ff ff ff [ 9.080047] saa7133[0]: i2c eeprom 20: 01 40 01 02 03 01 01 03 08 ff 00 d5 ff ff ff ff [ 9.080055] saa7133[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 9.080063] saa7133[0]: i2c eeprom 40: ff 21 00 c2 96 10 03 32 55 50 ff ff ff ff ff ff [ 9.080071] saa7133[0]: i2c eeprom 50: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 9.080080] saa7133[0]: i2c eeprom 60: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 9.080088] saa7133[0]: i2c eeprom 70: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 9.080096] saa7133[0]: i2c eeprom 80: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 9.080104] saa7133[0]: i2c eeprom 90: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 9.080112] saa7133[0]: i2c eeprom a0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 9.080120] saa7133[0]: i2c eeprom b0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 9.080128] saa7133[0]: i2c eeprom c0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 9.080136] saa7133[0]: i2c eeprom d0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 9.080144] saa7133[0]: i2c eeprom e0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 9.080153] saa7133[0]: i2c eeprom f0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 9.080163] i2c-adapter i2c-1: Invalid 7-bit address 0x7a [ 9.230235] __ratelimit: 3 callbacks suppressed [ 9.230239] type=1505 audit(1257859580.740:12): operation="profile_replace" pid=753 name=/usr/share/gdm/guest-session/Xsession [ 9.232180] type=1505 audit(1257859580.744:13): operation="profile_replace" pid=754 name=/sbin/dhclient3 [ 9.232502] type=1505 audit(1257859580.744:14): operation="profile_replace" pid=754 name=/usr/lib/NetworkManager/nm-dhcp-client.action [ 9.232673] type=1505 audit(1257859580.744:15): operation="profile_replace" pid=754 name=/usr/lib/connman/scripts/dhclient-script [ 9.237503] type=1505 audit(1257859580.748:16): operation="profile_replace" pid=755 name=/usr/bin/evince [ 9.243184] type=1505 audit(1257859580.752:17): operation="profile_replace" pid=755 name=/usr/bin/evince-previewer [ 9.246386] type=1505 audit(1257859580.756:18): operation="profile_replace" pid=755 name=/usr/bin/evince-thumbnailer [ 9.250529] tuner 1-004b: chip found @ 0x96 (saa7133[0]) [ 9.252689] type=1505 audit(1257859580.764:19): operation="profile_replace" pid=757 name=/usr/lib/cups/backend/cups-pdf [ 9.253106] type=1505 audit(1257859580.764:20): operation="profile_replace" pid=757 name=/usr/sbin/cupsd [ 9.255196] type=1505 audit(1257859580.764:21): operation="profile_replace" pid=758 name=/usr/sbin/tcpdump [ 9.328167] tda829x 1-004b: setting tuner address to 61 [ 9.412400] tda829x 1-004b: type set to tda8290+75a [ 13.340088] saa7133[0]: registered device video0 [v4l2] [ 13.340111] saa7133[0]: registered device vbi0 [ 13.340133] saa7133[0]: registered device radio0 [ 13.377533] saa7134 ALSA driver for DMA sound loaded [ 13.377546] IRQ 20/saa7133[0]: IRQF_DISABLED is not guaranteed on shared IRQs [ 13.377567] saa7133[0]/alsa: saa7133[0] at 0xfbfff800 irq 20 registered as card -2 [ 13.592662] dvb_init() allocating 1 frontend [ 13.724403] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 13.864111] DVB: registering new adapter (saa7133[0]) [ 13.864118] DVB: registering adapter 0 frontend 0 (Philips TDA10046H DVB-T)... [ 13.936014] tda1004x: setting up plls for 48MHz sampling clock [ 14.694408] ppdev: user-space parallel port driver [ 16.212006] tda1004x: timeout waiting for DSP ready [ 16.252007] tda1004x: found firmware revision 0 -- invalid [ 16.252011] tda1004x: trying to boot from eeprom [ 16.724375] uli526x: eth0 NIC Link is Up 100 Mbps Full duplex [ 18.576006] tda1004x: timeout waiting for DSP ready [ 18.616014] tda1004x: found firmware revision 0 -- invalid [ 18.616019] tda1004x: waiting for firmware upload... [ 18.616024] saa7134 0000:02:07.0: firmware: requesting dvb-fe-tda10046.fw [ 23.196004] [ 23.196009] floppy driver state [ 23.196010] ------------------- [ 23.196014] now=4294898095 last interrupt=4294892642 diff=5453 last called handler=f8088770 [ 23.196017] timeout_message=lock fdc [ 23.196018] last output bytes: [ 23.196021] 8 80 4294892636 [ 23.196022] 8 80 4294892636 [ 23.196024] 8 80 4294892636 [ 23.196026] 8 80 4294892641 [ 23.196027] 8 80 4294892641 [ 23.196029] 8 80 4294892641 [ 23.196031] 8 80 4294892641 [ 23.196032] e 80 4294892641 [ 23.196034] 13 80 4294892641 [ 23.196036] 0 90 4294892641 [ 23.196038] 1a 90 4294892641 [ 23.196039] 0 90 4294892641 [ 23.196041] 12 90 4294892641 [ 23.196043] 0 90 4294892641 [ 23.196044] 14 90 4294892641 [ 23.196046] 18 80 4294892641 [ 23.196048] 8 80 4294892642 [ 23.196049] 8 80 4294892642 [ 23.196051] 8 80 4294892642 [ 23.196053] 8 80 4294892642 [ 23.196054] last result at 4294892642 [ 23.196056] last redo_fd_request at 4294892648 [ 23.196057] [ 23.196065] status=80 [ 23.196066] fdc_busy=1 [ 23.196068] floppy_work.func=f808c140 [ 23.196069] cont=f8091c38 [ 23.196071] current_req=(null) [ 23.196073] command_status=-1 [ 23.196074] [ 23.196076] floppy0: floppy timeout called [ 32.072008] tda1004x: found firmware revision 20 -- ok [ 32.466656] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 32.977930] agpgart-amd64 0000:00:00.0: AGP 3.0 bridge [ 32.977946] agpgart-amd64 0000:00:00.0: putting AGP V3 device into 8x mode [ 32.977975] nvidia 0000:01:00.0: putting AGP V3 device into 8x mode [ 42.640015] eth0: no IPv6 routers present [ 80.996148] Marking TSC unstable due to cpufreq changes [ 81.628030] Clocksource tsc unstable (delta = -192122392 ns) [ 635.804039] tda1004x: setting up plls for 48MHz sampling clock [ 636.112030] tda1004x: found firmware revision 20 -- ok [ 854.875557] udev: starting version 147 [ 858.872350] type=1505 audit(1257860430.384:22): operation="profile_replace" pid=8688 name=/usr/share/gdm/guest-session/Xsession [ 858.876242] type=1505 audit(1257860430.388:23): operation="profile_replace" pid=8689 name=/sbin/dhclient3 [ 858.876838] type=1505 audit(1257860430.388:24): operation="profile_replace" pid=8689 name=/usr/lib/NetworkManager/nm-dhcp-client.action [ 858.877169] type=1505 audit(1257860430.388:25): operation="profile_replace" pid=8689 name=/usr/lib/connman/scripts/dhclient-script [ 858.886695] type=1505 audit(1257860430.396:26): operation="profile_replace" pid=8690 name=/usr/bin/evince [ 858.896859] type=1505 audit(1257860430.408:27): operation="profile_replace" pid=8690 name=/usr/bin/evince-previewer [ 858.902534] type=1505 audit(1257860430.412:28): operation="profile_replace" pid=8690 name=/usr/bin/evince-thumbnailer [ 858.913423] type=1505 audit(1257860430.424:29): operation="profile_replace" pid=8692 name=/usr/lib/cups/backend/cups-pdf [ 858.913889] type=1505 audit(1257860430.424:30): operation="profile_replace" pid=8692 name=/usr/sbin/cupsd [ 858.916237] type=1505 audit(1257860430.428:31): operation="profile_replace" pid=8693 name=/usr/sbin/tcpdump [ 870.441758] __ratelimit: 12 callbacks suppressed [ 870.441762] type=1505 audit(1257860441.952:36): operation="profile_replace" pid=8725 name=/usr/bin/evince [ 870.443524] type=1505 audit(1257860441.952:37): operation="profile_replace" pid=8725 name=/usr/bin/evince-previewer [ 870.445622] type=1505 audit(1257860441.956:38): operation="profile_replace" pid=8725 name=/usr/bin/evince-thumbnailer [ 870.818025] type=1505 audit(1257860442.328:39): operation="profile_replace" pid=8727 name=/usr/lib/cups/backend/cups-pdf [ 870.818277] type=1505 audit(1257860442.328:40): operation="profile_replace" pid=8727 name=/usr/sbin/cupsd [ 870.921906] type=1505 audit(1257860442.432:41): operation="profile_replace" pid=8728 name=/usr/sbin/tcpdump [ 896.530359] type=1505 audit(1257860468.040:42): operation="profile_replace" pid=9979 name=/usr/bin/evince [ 896.532682] type=1505 audit(1257860468.044:43): operation="profile_replace" pid=9979 name=/usr/bin/evince-previewer [ 896.534136] type=1505 audit(1257860468.044:44): operation="profile_replace" pid=9979 name=/usr/bin/evince-thumbnailer [ 915.371228] SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled [ 915.381654] SGI XFS Quota Management subsystem [ 915.428417] JFS: nTxBlock = 8019, nTxLock = 64152 [ 915.558087] NTFS driver 2.1.29 [Flags: R/O MODULE]. [ 915.674808] QNX4 filesystem 0.2.3 registered. [ 1799.856030] tda1004x: setting up plls for 48MHz sampling clock [ 1800.188038] tda1004x: found firmware revision 20 -- ok [ 3243.512018] tda1004x: setting up plls for 48MHz sampling clock [ 3243.796018] tda1004x: found firmware revision 20 -- ok [ 5721.376022] tda1004x: setting up plls for 48MHz sampling clock [ 5721.660512] tda1004x: found firmware revision 20 -- ok [ 5751.712151] DVB: adapter 0 frontend 0 frequency 1000000 out of range (51000000..858000000) [ 5751.712231] DVB: adapter 0 frontend 0 frequency 1000000 out of range (51000000..858000000)