ow: 0x60000000 - 0x67ffffff [ 14.426318] ricoh-mmc: Ricoh MMC controller found at 0000:02:06.4 [1180:0843] (rev 10) [ 14.426342] ricoh-mmc: Controller is now disabled. [ 14.426479] yenta_cardbus 0000:02:06.1: CardBus bridge found [103c:30be] [ 14.552831] yenta_cardbus 0000:02:06.1: ISA IRQ mask 0x0000, PCI irq 19 [ 14.552836] yenta_cardbus 0000:02:06.1: Socket status: 30000810 [ 14.552840] pci_bus 0000:02: Raising subordinate bus# of parent bus (#02) from #04 to #07 [ 14.552849] yenta_cardbus 0000:02:06.1: pcmcia: parent PCI bridge I/O window: 0x5000 - 0x5fff [ 14.552852] pcmcia_socket pcmcia_socket1: cs: IO port probe 0x5000-0x5fff: clean. [ 14.553106] yenta_cardbus 0000:02:06.1: pcmcia: parent PCI bridge Memory window: 0xe4100000 - 0xe43fffff [ 14.553110] yenta_cardbus 0000:02:06.1: pcmcia: parent PCI bridge Memory window: 0x60000000 - 0x67ffffff [ 15.025637] lp: driver loaded but no devices found [ 15.047403] parport_pc 00:02: reported by Plug and Play ACPI [ 15.047483] parport0: PC-style at 0x378 (0x778), irq 7, dma 1 [PCSPP,TRISTATE,COMPAT,ECP,DMA] [ 15.082081] Synaptics Touchpad, model: 1, fw: 6.2, id: 0x2580b1, caps: 0xa04793/0x300000 [ 15.082086] serio: Synaptics pass-through port at isa0060/serio4/input0 [ 15.121905] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input7 [ 15.139405] lis3lv02d: laptop model unknown, using default axes configuration [ 15.140132] lis3lv02d: 2-byte sensor found [ 15.145203] lp0: using parport0 (interrupt-driven). [ 15.156471] input: ST LIS3LV02DL Accelerometer as /devices/platform/lis3lv02d/input/input8 [ 15.156551] Registered led device: hp::hddprotect [ 15.156572] lis3lv02d driver loaded. [ 15.160282] ppdev: user-space parallel port driver [ 15.171606] sdhci-pci 0000:02:06.3: SDHCI controller found [1180:0822] (rev 20) [ 15.171627] sdhci-pci 0000:02:06.3: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 15.173675] Registered led device: mmc0:: [ 15.174726] mmc0: SDHCI controller on PCI [0000:02:06.3] using PIO [ 15.180142] cfg80211: Calling CRDA to update world regulatory domain [ 15.192083] pcmcia_socket pcmcia_socket1: pccard: PCMCIA card inserted into slot 1 [ 15.331076] pcmcia_socket pcmcia_socket1: cs: IO port probe 0x100-0x3af: excluding 0x1f0-0x1f7 [ 15.333440] pcmcia_socket pcmcia_socket1: cs: IO port probe 0x3e0-0x4ff: excluding 0x3f0-0x3f7 [ 15.334425] pcmcia_socket pcmcia_socket1: cs: IO port probe 0x820-0x8ff: clean. [ 15.335213] pcmcia_socket pcmcia_socket1: cs: IO port probe 0xc00-0xcf7: clean. [ 15.336227] pcmcia_socket pcmcia_socket1: cs: IO port probe 0xa00-0xaff: clean. [ 15.527116] Bluetooth: Generic Bluetooth USB driver ver 0.5 [ 15.527250] usbcore: registered new interface driver btusb [ 15.534030] ip_tables: (C) 2000-2006 Netfilter Core Team [ 15.580054] pcmcia_socket pcmcia_socket1: cs: memory probe 0xe4100000-0xe43fffff: excluding 0xe4100000-0xe412ffff [ 15.584803] pcmcia 1.0: pcmcia: registering new device pcmcia1.0 [ 15.590138] b43-phy0: Broadcom 4311 WLAN found (core revision 13) [ 15.591372] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x100-0x3af: excluding 0x1f0-0x1f7 [ 15.593768] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x3e0-0x4ff: excluding 0x3f0-0x3f7 [ 15.594745] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x820-0x8ff: clean. [ 15.595558] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xc00-0xcf7: clean. [ 15.596552] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xa00-0xaff: clean. [ 15.653649] scsi3 : pata_pcmcia [ 15.653726] ata4: PATA max PIO0 cmd 0x5100 ctl 0x510e irq 19 [ 15.814704] cfg80211: World regulatory domain updated: [ 15.814708] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 15.814711] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 15.814714] (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 15.814716] (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 15.814719] (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 15.814721] (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 15.842364] tpm_inf_pnp 00:03: Found C282 with ID IFX0102 [ 15.842423] tpm_inf_pnp 00:03: TPM found: config base 0x560, data base 0x570, chip version 0x000b, vendor id 0x15d1 (Infineon), product id 0x000b (SLB 9635 TT 1.2) [ 16.405127] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 16.405130] Bluetooth: BNEP filters: protocol multicast [ 16.606299] phy0: Selected rate control algorithm 'minstrel' [ 16.607081] Broadcom 43xx driver loaded [ Features: PL, Firmware-ID: FW13 ] [ 16.679413] Bridge firewalling registered [ 17.417860] HDA Intel 0000:00:1b.0: power state changed by ACPI to D0 [ 17.417872] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 17.417907] HDA Intel 0000:00:1b.0: setting latency timer to 64 [ 17.600866] psmouse serio5: ID: 10 00 64 [ 17.885394] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input9 [ 20.217480] input: PS/2 Generic Mouse as /devices/platform/i8042/serio4/serio5/input/input10 [ 20.876245] e1000e 0000:00:19.0: irq 28 for MSI/MSI-X [ 20.936096] e1000e 0000:00:19.0: irq 28 for MSI/MSI-X [ 20.936408] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 21.005464] b43 ssb0:0: firmware: requesting b43/ucode13.fw [ 21.352142] b43 ssb0:0: firmware: requesting b43/b0g0initvals13.fw [ 21.548069] b43-phy0: Loading firmware version 351.126 (2006-07-29 05:54:02) [ 21.548075] b43-phy0 warning: You are using an old firmware image. Support for old firmware will be removed soon (official deadline was July 2008). [ 21.548080] b43-phy0 warning: You must go to http://wireless.kernel.org/en/users/Drivers/b43#devicefirmware and download the correct firmware for this driver version. Please carefully read all instructions on this website. [ 21.628701] Registered led device: b43-phy0::tx [ 21.628721] Registered led device: b43-phy0::rx [ 21.628741] Registered led device: b43-phy0::radio [ 21.640599] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 22.340934] e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: None [ 22.340938] 0000:00:19.0: eth0: 10/100 speed: disabling TSO [ 22.341151] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 23.084125] [drm] TV-16: set mode NTSC 480i 0 [ 23.250061] [drm] TV-16: set mode NTSC 480i 0 [ 23.368034] type=1505 audit(1260552553.781:12): operation="profile_replace" pid=1151 name=/usr/share/gdm/guest-session/Xsession [ 23.369961] type=1505 audit(1260552553.785:13): operation="profile_replace" pid=1152 name=/sbin/dhclient3 [ 23.370698] type=1505 audit(1260552553.785:14): operation="profile_replace" pid=1152 name=/usr/lib/NetworkManager/nm-dhcp-client.action [ 23.371095] type=1505 audit(1260552553.785:15): operation="profile_replace" pid=1152 name=/usr/lib/connman/scripts/dhclient-script [ 23.375038] type=1505 audit(1260552553.789:16): operation="profile_replace" pid=1153 name=/usr/bin/evince [ 23.387158] type=1505 audit(1260552553.801:17): operation="profile_replace" pid=1153 name=/usr/bin/evince-previewer [ 23.395566] type=1505 audit(1260552553.809:18): operation="profile_replace" pid=1153 name=/usr/bin/evince-thumbnailer [ 23.414916] type=1505 audit(1260552553.829:19): operation="profile_replace" pid=1155 name=/usr/lib/cups/backend/cups-pdf [ 23.415869] type=1505 audit(1260552553.829:20): operation="profile_replace" pid=1155 name=/usr/sbin/cupsd [ 23.419086] type=1505 audit(1260552553.833:21): operation="profile_replace" pid=1156 name=/usr/sbin/tcpdump [ 23.577836] [drm] TV-16: set mode NTSC 480i 0 [ 23.742914] [drm] TV-16: set mode NTSC 480i 0 [ 29.310568] vboxdrv: Trying to deactivate the NMI watchdog permanently... [ 29.310572] vboxdrv: Warning: 2.6.31+ kernel detected. Most likely the hwardware performance [ 29.310573] vboxdrv: counter framework which can generate NMIs is active. You have to prevent [ 29.310574] vboxdrv: the usage of hardware performance counters by [ 29.310575] vboxdrv: echo 2 > /proc/sys/kernel/perf_counter_paranoid [ 29.310579] vboxdrv: Found 2 processor cores. [ 29.310692] vboxdrv: fAsync=0 offMin=0x1c2 offMax=0x9c84 [ 29.310739] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'. [ 29.310741] vboxdrv: Successfully loaded version 3.0.8_OSE (interface 0x000e0000). [ 31.461879] [drm] TV-16: set mode NTSC 480i 0 [ 31.631536] [drm] TV-16: set mode NTSC 480i 0 [ 31.949098] [drm] TV-16: set mode NTSC 480i 0 [ 32.117034] [drm] TV-16: set mode NTSC 480i 0 [ 32.444574] [drm] TV-16: set mode NTSC 480i 0 [ 32.614002] [drm] TV-16: set mode NTSC 480i 0 [ 33.012069] eth0: no IPv6 routers present [ 514.228266] [drm] TV-16: set mode NTSC 480i 0 [ 514.393496] [drm] TV-16: set mode NTSC 480i 0 [ 514.723137] [drm] TV-16: set mode NTSC 480i 0 [ 514.888540] [drm] TV-16: set mode NTSC 480i 0 [ 515.214681] [drm] TV-16: set mode NTSC 480i 0 [ 515.380917] [drm] TV-16: set mode NTSC 480i 0 [ 557.088098] usb 5-1: new full speed USB device using uhci_hcd and address 2 [ 557.243355] usb 5-1: configuration #1 chosen from 1 choice [ 715.529082] CE: hpet increasing min_delta_ns to 15000 nsec [ 897.294215] usb 5-1: usbfs: USBDEVFS_CONTROL failed cmd usb_modeswitch rqt 128 rq 6 len 255 ret -71 [ 897.295214] usb 5-1: usbfs: USBDEVFS_CONTROL failed cmd usb_modeswitch rqt 128 rq 6 len 255 ret -71 [ 897.296232] usb 5-1: usbfs: USBDEVFS_CONTROL failed cmd usb_modeswitch rqt 0 rq 3 len 0 ret -71 [ 897.353326] usbcore: registered new interface driver usbserial [ 897.353362] USB Serial support registered for generic [ 897.353457] usbcore: registered new interface driver usbserial_generic [ 897.353462] usbserial: USB Serial Driver core [ 897.363436] USB Serial support registered for GSM modem (1-port) [ 897.363577] usbcore: registered new interface driver option [ 897.363583] option: v0.7.2:USB Driver for GSM modems [ 897.364263] option 5-1:1.0: GSM modem (1-port) converter detected [ 897.364437] usb 5-1: GSM modem (1-port) converter now attached to ttyUSB0 [ 897.389097] usbcore: deregistering interface driver option [ 897.389288] option1 ttyUSB0: GSM modem (1-port) converter now disconnected from ttyUSB0 [ 897.389325] option 5-1:1.0: device disconnected [ 897.389365] USB Serial deregistering driver GSM modem (1-port) [ 897.405092] usbcore: deregistering interface driver usbserial_generic [ 897.405153] USB Serial deregistering driver generic [ 897.405195] usbcore: deregistering interface driver usbserial [ 897.430696] usbcore: registered new interface driver usbserial [ 897.430732] USB Serial support registered for generic [ 897.430826] usbcore: registered new interface driver usbserial_generic [ 897.430831] usbserial: USB Serial Driver core [ 897.433127] usb 5-1: USB disconnect, address 2 [ 897.435312] USB Serial support registered for GSM modem (1-port) [ 897.435430] usbcore: registered new interface driver option [ 897.435435] option: v0.7.2:USB Driver for GSM modems [ 897.472257] Initializing USB Mass Storage driver... [ 897.472406] usbcore: registered new interface driver usb-storage [ 897.472414] USB Mass Storage support registered. [ 898.229694] usb 2-6: USB disconnect, address 3 [ 919.744117] usb 7-2: new full speed USB device using uhci_hcd and address 3 [ 919.900734] usb 7-2: configuration #1 chosen from 1 choice [ 919.904583] scsi4 : SCSI emulation for USB Mass Storage devices [ 919.904984] usb 7-2: USB disconnect, address 3 [ 919.904995] usb-storage: device found at 3 [ 919.904999] usb-storage: waiting for device to settle before scanning [ 920.513092] usb 7-2: new full speed USB device using uhci_hcd and address 4 [ 920.671736] usb 7-2: configuration #1 chosen from 1 choice [ 920.678178] option 7-2:1.0: GSM modem (1-port) converter detected [ 920.678336] usb 7-2: GSM modem (1-port) converter now attached to ttyUSB0 [ 920.680604] option 7-2:1.1: GSM modem (1-port) converter detected [ 920.680726] usb 7-2: GSM modem (1-port) converter now attached to ttyUSB1 [ 920.685580] scsi5 : SCSI emulation for USB Mass Storage devices [ 920.685973] usb-storage: device found at 4 [ 920.685979] usb-storage: waiting for device to settle before scanning [ 925.685613] usb-storage: device scan complete [ 925.688619] scsi 5:0:0:0: CD-ROM HUAWEI Mass Storage 2.31 PQ: 0 ANSI: 2 [ 925.711586] sr0: scsi-1 drive [ 925.711595] Uniform CD-ROM driver Revision: 3.20 [ 925.711847] sr 5:0:0:0: Attached scsi CD-ROM sr0 [ 925.711994] sr 5:0:0:0: Attached scsi generic sg1 type 5 [ 937.655582] sr0: CDROM (ioctl) error, command: Get configuration 46 00 00 00 00 00 00 00 20 00 [ 937.655613] sr: Sense Key : Hardware Error [current] [ 937.655623] sr: Add. Sense: No additional sense information [ 937.876957] sr0: CDROM (ioctl) error, command: Get configuration 46 00 00 00 00 00 00 00 20 00 [ 937.876990] sr: Sense Key : Hardware Error [current] [ 937.877027] sr: Add. Sense: No additional sense information [ 937.963526] option: option_instat_callback: error -108 [ 937.963652] option1 ttyUSB0: GSM modem (1-port) converter now disconnected from ttyUSB0 [ 937.963676] option 7-2:1.0: device disconnected [ 937.963764] option1 ttyUSB1: GSM modem (1-port) converter now disconnected from ttyUSB1 [ 937.963785] option 7-2:1.1: device disconnected [ 938.072091] usb 7-2: reset full speed USB device using uhci_hcd and address 4 [ 938.214626] option 7-2:1.1: GSM modem (1-port) converter detected [ 938.214797] usb 7-2: GSM modem (1-port) converter now attached to ttyUSB0 [ 938.214839] option 7-2:1.0: GSM modem (1-port) converter detected [ 938.214958] usb 7-2: GSM modem (1-port) converter now attached to ttyUSB1 [ 938.611530] option: option_instat_callback: error -108 [ 938.612870] option1 ttyUSB1: GSM modem (1-port) converter now disconnected from ttyUSB1 [ 938.612916] option 7-2:1.0: device disconnected [ 938.613101] option1 ttyUSB0: GSM modem (1-port) converter now disconnected from ttyUSB0 [ 938.613144] option 7-2:1.1: device disconnected [ 938.724099] usb 7-2: reset full speed USB device using uhci_hcd and address 4 [ 938.844123] usb 7-2: device descriptor read/64, error -71 [ 939.012269] usb 7-2: USB disconnect, address 4 [ 939.013992] scsi 5:0:0:0: rejecting I/O to dead device [ 939.014075] scsi 5:0:0:0: rejecting I/O to dead device [ 955.704104] usb 7-2: new full speed USB device using uhci_hcd and address 5 [ 955.861739] usb 7-2: configuration #1 chosen from 1 choice [ 955.866634] option 7-2:1.0: GSM modem (1-port) converter detected [ 955.866785] usb 7-2: GSM modem (1-port) converter now attached to ttyUSB0 [ 955.868750] option 7-2:1.1: GSM modem (1-port) converter detected [ 955.868875] usb 7-2: GSM modem (1-port) converter now attached to ttyUSB1 [ 955.873422] scsi6 : SCSI emulation for USB Mass Storage devices [ 955.873745] usb-storage: device found at 5 [ 955.873750] usb-storage: waiting for device to settle before scanning [ 960.873677] usb-storage: device scan complete [ 981.990536] option: option_instat_callback: error -108 [ 981.990772] option1 ttyUSB0: GSM modem (1-port) converter now disconnected from ttyUSB0 [ 981.990820] option 7-2:1.0: device disconnected [ 981.990994] option1 ttyUSB1: GSM modem (1-port) converter now disconnected from ttyUSB1 [ 981.991034] option 7-2:1.1: device disconnected [ 982.100103] usb 7-2: reset full speed USB device using uhci_hcd and address 5 [ 982.243627] option 7-2:1.1: GSM modem (1-port) converter detected [ 982.243804] usb 7-2: GSM modem (1-port) converter now attached to ttyUSB0 [ 982.243847] option 7-2:1.0: GSM modem (1-port) converter detected [ 982.243966] usb 7-2: GSM modem (1-port) converter now attached to ttyUSB1 [ 982.273611] scsi 6:0:0:0: CD-ROM HUAWEI Mass Storage 2.31 PQ: 0 ANSI: 2 [ 982.296568] sr0: scsi-1 drive [ 982.296822] sr 6:0:0:0: Attached scsi CD-ROM sr0 [ 982.296968] sr 6:0:0:0: Attached scsi generic sg1 type 5 [ 994.658575] sr0: CDROM (ioctl) error, command: Get configuration 46 00 00 00 00 00 00 00 20 00 [ 994.658607] sr: Sense Key : Hardware Error [current] [ 994.658617] sr: Add. Sense: No additional sense information [ 994.902597] sr0: CDROM (ioctl) error, command: Get configuration 46 00 00 00 00 00 00 00 20 00 [ 994.902629] sr: Sense Key : Hardware Error [current] [ 994.902640] sr: Add. Sense: No additional sense information [ 995.022535] option: option_instat_callback: error -108 [ 995.022778] option1 ttyUSB1: GSM modem (1-port) converter now disconnected from ttyUSB1 [ 995.022825] option 7-2:1.0: device disconnected [ 995.022985] option1 ttyUSB0: GSM modem (1-port) converter now disconnected from ttyUSB0 [ 995.023026] option 7-2:1.1: device disconnected [ 995.132108] usb 7-2: reset full speed USB device using uhci_hcd and address 5 [ 995.279621] option 7-2:1.1: GSM modem (1-port) converter detected [ 995.279807] usb 7-2: GSM modem (1-port) converter now attached to ttyUSB0 [ 995.279850] option 7-2:1.0: GSM modem (1-port) converter detected [ 995.279975] usb 7-2: GSM modem (1-port) converter now attached to ttyUSB1 [ 995.677539] option: option_instat_callback: error -108 [ 995.687356] option1 ttyUSB1: GSM modem (1-port) converter now disconnected from ttyUSB1 [ 995.687391] option 7-2:1.0: device disconnected [ 995.687557] option1 ttyUSB0: GSM modem (1-port) converter now disconnected from ttyUSB0 [ 995.687598] option 7-2:1.1: device disconnected [ 995.797064] usb 7-2: reset full speed USB device using uhci_hcd and address 5 [ 995.868074] usb 7-2: USB disconnect, address 5 [ 1028.121139] usb 7-2: new full speed USB device using uhci_hcd and address 6 [ 1028.282655] usb 7-2: configuration #1 chosen from 1 choice [ 1028.287593] option 7-2:1.0: GSM modem (1-port) converter detected [ 1028.287683] usb 7-2: GSM modem (1-port) converter now attached to ttyUSB0 [ 1028.289584] option 7-2:1.1: GSM modem (1-port) converter detected [ 1028.289654] usb 7-2: GSM modem (1-port) converter now attached to ttyUSB1 [ 1028.290556] scsi7 : SCSI emulation for USB Mass Storage devices [ 1028.290746] usb-storage: device found at 6 [ 1028.290748] usb-storage: waiting for device to settle before scanning [ 1033.289689] usb-storage: device scan complete [ 1048.057258] PPP BSD Compression module registered [ 1048.080819] PPP Deflate Compression module registered [ 1053.990547] option: option_instat_callback: error -108 [ 1053.991896] option1 ttyUSB0: GSM modem (1-port) converter now disconnected from ttyUSB0 [ 1053.991932] option 7-2:1.0: device disconnected [ 1053.992107] option1 ttyUSB1: GSM modem (1-port) converter now disconnected from ttyUSB1 [ 1053.992153] option 7-2:1.1: device disconnected [ 1054.003658] modem-manager[880]: segfault at 0 ip 080529ae sp bfa0db90 error 4 in modem-manager[8048000+24000] [ 1054.105681] usb 7-2: reset full speed USB device using uhci_hcd and address 6 [ 1054.251632] option 7-2:1.1: GSM modem (1-port) converter detected [ 1054.251804] usb 7-2: GSM modem (1-port) converter now attached to ttyUSB1 [ 1054.251847] option 7-2:1.0: GSM modem (1-port) converter detected [ 1054.251967] usb 7-2: GSM modem (1-port) converter now attached to ttyUSB2 [ 1054.280395] scsi 7:0:0:0: CD-ROM HUAWEI Mass Storage 2.31 PQ: 0 ANSI: 2 [ 1054.308561] sr0: scsi-1 drive [ 1054.308687] sr 7:0:0:0: Attached scsi CD-ROM sr0 [ 1054.308765] sr 7:0:0:0: Attached scsi generic sg1 type 5 [ 1066.655600] sr0: CDROM (ioctl) error, command: Get configuration 46 00 00 00 00 00 00 00 20 00 [ 1066.655631] sr: Sense Key : Hardware Error [current] [ 1066.655641] sr: Add. Sense: No additional sense information [ 1066.899586] sr0: CDROM (ioctl) error, command: Get configuration 46 00 00 00 00 00 00 00 20 00 [ 1066.899617] sr: Sense Key : Hardware Error [current] [ 1066.899628] sr: Add. Sense: No additional sense information [ 1066.993519] option: option_instat_callback: error -108 [ 1066.994725] option1 ttyUSB2: GSM modem (1-port) converter now disconnected from ttyUSB2 [ 1066.994743] option 7-2:1.0: device disconnected [ 1066.994823] option1 ttyUSB1: GSM modem (1-port) converter now disconnected from ttyUSB1 [ 1066.994846] option 7-2:1.1: device disconnected [ 1067.104078] usb 7-2: reset full speed USB device using uhci_hcd and address 6 [ 1067.250652] option 7-2:1.1: GSM modem (1-port) converter detected [ 1067.250835] usb 7-2: GSM modem (1-port) converter now attached to ttyUSB0 [ 1067.250878] option 7-2:1.0: GSM modem (1-port) converter detected [ 1067.251000] usb 7-2: GSM modem (1-port) converter now attached to ttyUSB1 [ 1067.652516] option: option_instat_callback: error -108 [ 1067.652670] option1 ttyUSB1: GSM modem (1-port) converter now disconnected from ttyUSB1 [ 1067.652686] option 7-2:1.0: device disconnected [ 1067.652760] option1 ttyUSB0: GSM modem (1-port) converter now disconnected from ttyUSB0 [ 1067.652780] option 7-2:1.1: device disconnected [ 1067.760058] usb 7-2: reset full speed USB device using uhci_hcd and address 6 [ 1067.880070] usb 7-2: device descriptor read/64, error -71 [ 1068.057134] usb 7-2: USB disconnect, address 6 [ 1068.060967] scsi 7:0:0:0: rejecting I/O to dead device [ 1084.912108] usb 7-2: new full speed USB device using uhci_hcd and address 7 [ 1085.069758] usb 7-2: configuration #1 chosen from 1 choice [ 1085.075654] option 7-2:1.0: GSM modem (1-port) converter detected [ 1085.075812] usb 7-2: GSM modem (1-port) converter now attached to ttyUSB0 [ 1085.082030] option 7-2:1.1: GSM modem (1-port) converter detected [ 1085.082198] usb 7-2: GSM modem (1-port) converter now attached to ttyUSB1 [ 1085.092568] scsi8 : SCSI emulation for USB Mass Storage devices [ 1085.092735] usb-storage: device found at 7 [ 1085.092737] usb-storage: waiting for device to settle before scanning [ 1090.089697] usb-storage: device scan complete [ 1110.990554] option: option_instat_callback: error -108 [ 1110.990789] option1 ttyUSB0: GSM modem (1-port) converter now disconnected from ttyUSB0 [ 1110.990840] option 7-2:1.0: device disconnected [ 1110.991011] option1 ttyUSB1: GSM modem (1-port) converter now disconnected from ttyUSB1 [ 1110.991054] option 7-2:1.1: device disconnected [ 1111.100125] usb 7-2: reset full speed USB device using uhci_hcd and address 7 [ 1111.243140] option 7-2:1.1: GSM modem (1-port) converter detected [ 1111.243315] usb 7-2: GSM modem (1-port) converter now attached to ttyUSB0 [ 1111.243359] option 7-2:1.0: GSM modem (1-port) converter detected [ 1111.243478] usb 7-2: GSM modem (1-port) converter now attached to ttyUSB1 [ 1111.274080] scsi 8:0:0:0: CD-ROM HUAWEI Mass Storage 2.31 PQ: 0 ANSI: 2 [ 1111.296610] sr0: scsi-1 drive [ 1111.296870] sr 8:0:0:0: Attached scsi CD-ROM sr0 [ 1111.297020] sr 8:0:0:0: Attached scsi generic sg1 type 5 [ 1123.660600] sr0: CDROM (ioctl) error, command: Get configuration 46 00 00 00 00 00 00 00 20 00 [ 1123.660632] sr: Sense Key : Hardware Error [current] [ 1123.660643] sr: Add. Sense: No additional sense information [ 1123.906638] sr0: CDROM (ioctl) error, command: Get configuration 46 00 00 00 00 00 00 00 20 00 [ 1123.906670] sr: Sense Key : Hardware Error [current] [ 1123.906680] sr: Add. Sense: No additional sense information [ 1123.986525] option: option_instat_callback: error -108 [ 1123.988752] option1 ttyUSB1: GSM modem (1-port) converter now disconnected from ttyUSB1 [ 1123.988772] option 7-2:1.0: device disconnected [ 1123.988854] option1 ttyUSB0: GSM modem (1-port) converter now disconnected from ttyUSB0 [ 1123.988875] option 7-2:1.1: device disconnected [ 1124.096133] usb 7-2: reset full speed USB device using uhci_hcd and address 7 [ 1124.238648] option 7-2:1.1: GSM modem (1-port) converter detected [ 1124.238821] usb 7-2: GSM modem (1-port) converter now attached to ttyUSB0 [ 1124.238864] option 7-2:1.0: GSM modem (1-port) converter detected [ 1124.238981] usb 7-2: GSM modem (1-port) converter now attached to ttyUSB1 [ 1124.636552] option: option_instat_callback: error -108 [ 1124.638067] option1 ttyUSB1: GSM modem (1-port) converter now disconnected from ttyUSB1 [ 1124.638114] option 7-2:1.0: device disconnected [ 1124.638274] option1 ttyUSB0: GSM modem (1-port) converter now disconnected from ttyUSB0 [ 1124.638313] option 7-2:1.1: device disconnected [ 1124.761920] usb 7-2: reset full speed USB device using uhci_hcd and address 7 [ 1124.838472] usb 7-2: USB disconnect, address 7 [ 1141.704118] usb 7-2: new full speed USB device using uhci_hcd and address 8 [ 1141.861763] usb 7-2: configuration #1 chosen from 1 choice [ 1141.866645] option 7-2:1.0: GSM modem (1-port) converter detected [ 1141.866792] usb 7-2: GSM modem (1-port) converter now attached to ttyUSB0 [ 1141.872140] option 7-2:1.1: GSM modem (1-port) converter detected [ 1141.872296] usb 7-2: GSM modem (1-port) converter now attached to ttyUSB1 [ 1141.876038] scsi9 : SCSI emulation for USB Mass Storage devices [ 1141.876354] usb-storage: device found at 8 [ 1141.876361] usb-storage: waiting for device to settle before scanning [ 1146.881590] usb-storage: device scan complete [ 1168.002560] option: option_instat_callback: error -108 [ 1168.002842] option1 ttyUSB0: GSM modem (1-port) converter now disconnected from ttyUSB0 [ 1168.002893] option 7-2:1.0: device disconnected [ 1168.003077] option1 ttyUSB1: GSM modem (1-port) converter now disconnected from ttyUSB1 [ 1168.003120] option 7-2:1.1: device disconnected [ 1168.112127] usb 7-2: reset full speed USB device using uhci_hcd and address 8 [ 1168.254655] option 7-2:1.1: GSM modem (1-port) converter detected [ 1168.254839] usb 7-2: GSM modem (1-port) converter now attached to ttyUSB0 [ 1168.255369] option 7-2:1.0: GSM modem (1-port) converter detected [ 1168.255492] usb 7-2: GSM modem (1-port) converter now attached to ttyUSB1 [ 1168.280666] scsi 9:0:0:0: CD-ROM HUAWEI Mass Storage 2.31 PQ: 0 ANSI: 2 [ 1168.306585] sr0: scsi-1 drive [ 1168.306720] sr 9:0:0:0: Attached scsi CD-ROM sr0 [ 1168.306796] sr 9:0:0:0: Attached scsi generic sg1 type 5 [ 1180.657618] sr0: CDROM (ioctl) error, command: Get configuration 46 00 00 00 00 00 00 00 20 00 [ 1180.657650] sr: Sense Key : Hardware Error [current] [ 1180.657660] sr: Add. Sense: No additional sense information [ 1180.901600] sr0: CDROM (ioctl) error, command: Get configuration 46 00 00 00 00 00 00 00 20 00 [ 1180.901630] sr: Sense Key : Hardware Error [current] [ 1180.901641] sr: Add. Sense: No additional sense information [ 1181.031632] sr0: CDROM (ioctl) error, command: Get configuration 46 00 00 00 00 00 00 00 20 00 [ 1181.031665] sr: Sense Key : Hardware Error [current] [ 1181.031675] sr: Add. Sense: No additional sense information [ 1181.059630] sr0: CDROM (ioctl) error, command: Get configuration 46 00 00 28 00 00 00 00 10 00 [ 1181.059658] sr: Sense Key : Hardware Error [current] [ 1181.059668] sr: Add. Sense: No additional sense information [ 1181.087639] sr0: CDROM (ioctl) error, command: Get configuration 46 00 00 20 00 00 00 00 18 00 [ 1181.087665] sr: Sense Key : Hardware Error [current] [ 1181.087675] sr: Add. Sense: No additional sense information [ 1181.129640] sr0: CDROM (ioctl) error, command: Get configuration 46 00 00 00 00 00 00 00 20 00 [ 1181.129668] sr: Sense Key : Hardware Error [current] [ 1181.129677] sr: Add. Sense: No additional sense information [ 1181.141609] ISO 9660 Extensions: Microsoft Joliet Level 3 [ 1181.154557] option: option_instat_callback: error -108 [ 1181.155924] option1 ttyUSB1: GSM modem (1-port) converter now disconnected from ttyUSB1 [ 1181.155958] option 7-2:1.0: device disconnected [ 1181.156119] option1 ttyUSB0: GSM modem (1-port) converter now disconnected from ttyUSB0 [ 1181.156163] option 7-2:1.1: device disconnected [ 1181.264153] usb 7-2: reset full speed USB device using uhci_hcd and address 8 [ 1181.406648] option 7-2:1.1: GSM modem (1-port) converter detected [ 1181.406823] usb 7-2: GSM modem (1-port) converter now attached to ttyUSB0 [ 1181.406865] option 7-2:1.0: GSM modem (1-port) converter detected [ 1181.406986] usb 7-2: GSM modem (1-port) converter now attached to ttyUSB1 [ 1181.804562] option: option_instat_callback: error -108 [ 1181.809244] option1 ttyUSB1: GSM modem (1-port) converter now disconnected from ttyUSB1 [ 1181.809278] option 7-2:1.0: device disconnected [ 1181.809435] option1 ttyUSB0: GSM modem (1-port) converter now disconnected from ttyUSB0 [ 1181.809476] option 7-2:1.1: device disconnected [ 1181.920103] usb 7-2: reset full speed USB device using uhci_hcd and address 8 [ 1181.988192] sr 9:0:0:0: [sr0] Unhandled error code [ 1181.988201] sr 9:0:0:0: [sr0] Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK [ 1181.988211] end_request: I/O error, dev sr0, sector 43708 [ 1181.988243] ISOFS: unable to read i-node block [ 1181.988257] isofs_fill_super: get root inode failed [ 1181.989140] usb 7-2: USB disconnect, address 8 bruno@bruno-laptop:~$