[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.31-11-generic (buildd@yellow) (gcc version 4.4.1 (Ubuntu 4.4.1-4ubuntu4) ) #38-Ubuntu SMP Fri Oct 2 11:06:40 UTC 2009 (Ubuntu 2.6.31-11.38-generic) [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-2.6.31-11-generic root=UUID=c2936194-995c-46ad-851d-93992d206b27 ro quiet splash [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Centaur CentaurHauls [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 0000000000097800 (usable) [ 0.000000] BIOS-e820: 0000000000097800 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 00000000dfef0000 (usable) [ 0.000000] BIOS-e820: 00000000dfef0000 - 00000000dfef3000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000dfef3000 - 00000000dff00000 (ACPI data) [ 0.000000] BIOS-e820: 00000000f0000000 - 00000000f4000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved) [ 0.000000] BIOS-e820: 0000000100000000 - 0000000120000000 (usable) [ 0.000000] DMI present. [ 0.000000] Phoenix BIOS detected: BIOS may corrupt low RAM, working around it. [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) [ 0.000000] last_pfn = 0x120000 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-C7FFF write-protect [ 0.000000] C8000-FFFFF uncachable [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 0000000000 mask FF80000000 write-back [ 0.000000] 1 base 0080000000 mask FFC0000000 write-back [ 0.000000] 2 base 00C0000000 mask FFE0000000 write-back [ 0.000000] 3 base 0100000000 mask FFE0000000 write-back [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] TOM2: 0000000120000000 aka 4608M [ 0.000000] e820 update range: 00000000e0000000 - 0000000100000000 (usable) ==> (reserved) [ 0.000000] last_pfn = 0xdfef0 max_arch_pfn = 0x400000000 [ 0.000000] Scanning 0 areas for low memory corruption [ 0.000000] modified physical RAM map: [ 0.000000] modified: 0000000000000000 - 0000000000010000 (reserved) [ 0.000000] modified: 0000000000010000 - 0000000000097800 (usable) [ 0.000000] modified: 0000000000097800 - 00000000000a0000 (reserved) [ 0.000000] modified: 00000000000f0000 - 0000000000100000 (reserved) [ 0.000000] modified: 0000000000100000 - 00000000dfef0000 (usable) [ 0.000000] modified: 00000000dfef0000 - 00000000dfef3000 (ACPI NVS) [ 0.000000] modified: 00000000dfef3000 - 00000000dff00000 (ACPI data) [ 0.000000] modified: 00000000f0000000 - 00000000f4000000 (reserved) [ 0.000000] modified: 00000000fec00000 - 0000000100000000 (reserved) [ 0.000000] modified: 0000000100000000 - 0000000120000000 (usable) [ 0.000000] initial memory mapped : 0 - 20000000 [ 0.000000] init_memory_mapping: 0000000000000000-00000000dfef0000 [ 0.000000] Using x86 segment limits to approximate NX protection [ 0.000000] 0000000000 - 00dfe00000 page 2M [ 0.000000] 00dfe00000 - 00dfef0000 page 4k [ 0.000000] kernel direct mapping tables up to dfef0000 @ 10000-16000 [ 0.000000] init_memory_mapping: 0000000100000000-0000000120000000 [ 0.000000] Using x86 segment limits to approximate NX protection [ 0.000000] 0100000000 - 0120000000 page 2M [ 0.000000] kernel direct mapping tables up to 120000000 @ 14000-1a000 [ 0.000000] RAMDISK: 3795f000 - 37feff0a [ 0.000000] ACPI: RSDP 00000000000f76d0 00024 (v02 HPQOEM) [ 0.000000] ACPI: XSDT 00000000dfef3100 00054 (v01 HPQOEM SLIC-CPC 42302E31 AWRD 00000000) [ 0.000000] ACPI: FACP 00000000dfef9600 000F4 (v03 HPQOEM SLIC-CPC 42302E31 AWRD 00000000) [ 0.000000] ACPI: DSDT 00000000dfef32c0 062CE (v01 HPQOEM SLIC-CPC 00001000 MSFT 03000000) [ 0.000000] ACPI: FACS 00000000dfef0000 00040 [ 0.000000] ACPI: SLIC 00000000dfef9800 00176 (v01 HPQOEM SLIC-CPC 42302E31 AWRD 00000000) [ 0.000000] ACPI: SSDT 00000000dfef99c0 0030E (v01 HPQOEM SLIC-CPC 00000001 LTP 00000001) [ 0.000000] ACPI: HPET 00000000dfef9d40 00038 (v01 HPQOEM SLIC-CPC 42302E31 AWRD 00000098) [ 0.000000] ACPI: MCFG 00000000dfef9dc0 0003C (v01 HPQOEM SLIC-CPC 42302E31 AWRD 00000000) [ 0.000000] ACPI: APIC 00000000dfef9740 0007C (v01 HPQOEM SLIC-CPC 42302E31 AWRD 00000000) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] Scanning NUMA topology in Northbridge 24 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at 0000000000000000-0000000120000000 [ 0.000000] Bootmem setup node 0 0000000000000000-0000000120000000 [ 0.000000] NODE_DATA [0000000000015000 - 0000000000019fff] [ 0.000000] bootmap [000000000001a000 - 000000000003dfff] pages 24 [ 0.000000] (8 early reservations) ==> bootmem [0000000000 - 0120000000] [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] [ 0.000000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000] [ 0.000000] #2 [0001000000 - 00019d9bcc] TEXT DATA BSS ==> [0001000000 - 00019d9bcc] [ 0.000000] #3 [003795f000 - 0037feff0a] RAMDISK ==> [003795f000 - 0037feff0a] [ 0.000000] #4 [0000097800 - 0000100000] BIOS reserved ==> [0000097800 - 0000100000] [ 0.000000] #5 [00019da000 - 00019da6d0] BRK ==> [00019da000 - 00019da6d0] [ 0.000000] #6 [0000010000 - 0000014000] PGTABLE ==> [0000010000 - 0000014000] [ 0.000000] #7 [0000014000 - 0000015000] PGTABLE ==> [0000014000 - 0000015000] [ 0.000000] found SMP MP-table at [ffff8800000f55a0] f55a0 [ 0.000000] [ffffea0000000000-ffffea0003ffffff] PMD -> [ffff880028600000-ffff88002bffffff] on node 0 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000010 -> 0x00001000 [ 0.000000] DMA32 0x00001000 -> 0x00100000 [ 0.000000] Normal 0x00100000 -> 0x00120000 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[3] active PFN ranges [ 0.000000] 0: 0x00000010 -> 0x00000097 [ 0.000000] 0: 0x00000100 -> 0x000dfef0 [ 0.000000] 0: 0x00100000 -> 0x00120000 [ 0.000000] On node 0 totalpages: 1048183 [ 0.000000] DMA zone: 56 pages used for memmap [ 0.000000] DMA zone: 112 pages reserved [ 0.000000] DMA zone: 3807 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 14280 pages used for memmap [ 0.000000] DMA32 zone: 898856 pages, LIFO batch:31 [ 0.000000] Normal zone: 1792 pages used for memmap [ 0.000000] Normal zone: 129280 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0x1008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] ACPI: IRQ14 used by override. [ 0.000000] ACPI: IRQ15 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x10de8201 base: 0xfefff000 [ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs [ 0.000000] nr_irqs_gsi: 24 [ 0.000000] PM: Registered nosave memory: 0000000000097000 - 0000000000098000 [ 0.000000] PM: Registered nosave memory: 0000000000098000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000 [ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000 [ 0.000000] PM: Registered nosave memory: 00000000dfef0000 - 00000000dfef3000 [ 0.000000] PM: Registered nosave memory: 00000000dfef3000 - 00000000dff00000 [ 0.000000] PM: Registered nosave memory: 00000000dff00000 - 00000000f0000000 [ 0.000000] PM: Registered nosave memory: 00000000f0000000 - 00000000f4000000 [ 0.000000] PM: Registered nosave memory: 00000000f4000000 - 00000000fec00000 [ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 0000000100000000 [ 0.000000] Allocating PCI resources starting at dff00000 (gap: dff00000:10100000) [ 0.000000] NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:2 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 29 pages at ffff88002801f000, static data 89952 bytes [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1031943 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.31-11-generic root=UUID=c2936194-995c-46ad-851d-93992d206b27 ro quiet splash [ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes) [ 0.000000] Initializing CPU#0 [ 0.000000] Checking aperture... [ 0.000000] No AGP bridge found [ 0.000000] Node 0: aperture @ 200c000000 size 32 MB [ 0.000000] Aperture beyond 4GB. Ignoring. [ 0.000000] Your BIOS doesn't leave a aperture memory hole [ 0.000000] Please enable the IOMMU option in the BIOS setup [ 0.000000] This costs you 64 MB of RAM [ 0.000000] Mapping aperture over 65536 KB of RAM @ 20000000 [ 0.000000] PM: Registered nosave memory: 0000000020000000 - 0000000024000000 [ 0.000000] Memory: 4050524k/4718592k available (5290k kernel code, 525860k absent, 142208k reserved, 2998k data, 660k init) [ 0.000000] SLUB: Genslabs=14, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 [ 0.000000] NR_IRQS:4352 nr_irqs:424 [ 0.000000] Extended CMOS year: 2000 [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 3013.558 MHz processor. [ 0.000011] spurious 8259A interrupt: IRQ7. [ 0.001649] Console: colour VGA+ 80x25 [ 0.001651] console [tty0] enabled [ 0.010000] allocated 41943040 bytes of page_cgroup [ 0.010000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.010000] hpet clockevent registered [ 0.010000] HPET: 3 timers in total, 0 timers will be used for per-cpu timer [ 0.010000] Calibrating delay loop (skipped), value calculated using timer frequency.. 6027.11 BogoMIPS (lpj=30135580) [ 0.010000] Security Framework initialized [ 0.010000] AppArmor: AppArmor initialized [ 0.010000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.010000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.010000] Mount-cache hash table entries: 256 [ 0.010000] Initializing cgroup subsys ns [ 0.010000] Initializing cgroup subsys cpuacct [ 0.010000] Initializing cgroup subsys memory [ 0.010000] Initializing cgroup subsys freezer [ 0.010000] Initializing cgroup subsys net_cls [ 0.010000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 0.010000] CPU: L2 Cache: 512K (64 bytes/line) [ 0.010000] CPU 0/0x0 -> Node 0 [ 0.010000] tseg: 00dff00000 [ 0.010000] CPU: Physical Processor ID: 0 [ 0.010000] CPU: Processor Core ID: 0 [ 0.010000] using C1E aware idle routine [ 0.010000] Performance Counters: AMD PMU driver. [ 0.010000] ... version: 0 [ 0.010000] ... bit width: 48 [ 0.010000] ... generic counters: 4 [ 0.010000] ... value mask: 0000ffffffffffff [ 0.010000] ... max period: 00007fffffffffff [ 0.010000] ... fixed-purpose counters: 0 [ 0.010000] ... counter mask: 000000000000000f [ 0.010000] ACPI: Core revision 20090521 [ 0.012569] Setting APIC routing to flat [ 0.013015] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.113030] CPU0: AMD Athlon(tm) 64 X2 Dual Core Processor 5800+ stepping 02 [ 0.120000] Booting processor 1 APIC 0x1 ip 0x6000 [ 0.010000] Initializing CPU#1 [ 0.010000] Calibrating delay using timer specific routine.. 6027.43 BogoMIPS (lpj=30137159) [ 0.010000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 0.010000] CPU: L2 Cache: 512K (64 bytes/line) [ 0.010000] CPU 1/0x1 -> Node 0 [ 0.010000] CPU: Physical Processor ID: 0 [ 0.010000] CPU: Processor Core ID: 1 [ 0.270130] CPU1: AMD Athlon(tm) 64 X2 Dual Core Processor 5800+ stepping 02 [ 0.270140] Brought up 2 CPUs [ 0.270142] Total of 2 processors activated (12054.54 BogoMIPS). [ 0.270222] CPU0 attaching sched-domain: [ 0.270224] domain 0: span 0-1 level MC [ 0.270226] groups: 0 1 [ 0.270230] CPU1 attaching sched-domain: [ 0.270231] domain 0: span 0-1 level MC [ 0.270232] groups: 1 0 [ 0.270281] Booting paravirtualized kernel on bare hardware [ 0.270281] regulator: core version 0.5 [ 0.270281] Time: 20:14:31 Date: 10/06/09 [ 0.270281] NET: Registered protocol family 16 [ 0.270281] node 0 link 0: io port [9000, ffff] [ 0.270281] TOM: 00000000e0000000 aka 3584M [ 0.270281] node 0 link 0: mmio [a0000, bffff] [ 0.270281] node 0 link 0: mmio [e0000000, efffffff] [ 0.270281] node 0 link 0: mmio [f4000000, fe02ffff] [ 0.270281] node 0 link 0: mmio [f0000000, f03fffff] [ 0.270281] TOM2: 0000000120000000 aka 4608M [ 0.270281] bus: [00,03] on node 0 link 0 [ 0.270281] bus: 00 index 0 io port: [0, ffff] [ 0.270281] bus: 00 index 1 mmio: [a0000, bffff] [ 0.270281] bus: 00 index 2 mmio: [e0000000, f3ffffff] [ 0.270281] bus: 00 index 3 mmio: [f4000000, ffffffff] [ 0.270281] bus: 00 index 4 mmio: [120000000, fcffffffff] [ 0.270281] ACPI: bus type pci registered [ 0.270281] PCI: MCFG configuration 0: base f0000000 segment 0 buses 0 - 63 [ 0.270281] PCI: MCFG area at f0000000 reserved in E820 [ 0.270958] PCI: Using MMCONFIG at f0000000 - f3ffffff [ 0.270960] PCI: Using configuration type 1 for base access [ 0.271499] bio: create slab at 0 [ 0.271499] ACPI: EC: Look up EC in DSDT [ 0.276201] ACPI: Interpreter enabled [ 0.276207] ACPI: (supports S0 S1 S3 S4 S5) [ 0.276228] ACPI: Using IOAPIC for interrupt routing [ 0.284271] ACPI: No dock devices found. [ 0.284993] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 0.285189] pci 0000:00:01.1: reg 10 io port: [0xfc00-0xfc3f] [ 0.285197] pci 0000:00:01.1: reg 20 io port: [0x1c00-0x1c3f] [ 0.285201] pci 0000:00:01.1: reg 24 io port: [0x1c40-0x1c7f] [ 0.285217] pci 0000:00:01.1: PME# supported from D3hot D3cold [ 0.285222] pci 0000:00:01.1: PME# disabled [ 0.285263] pci 0000:00:02.0: reg 10 32bit mmio: [0xfe02f000-0xfe02ffff] [ 0.285281] pci 0000:00:02.0: supports D1 D2 [ 0.285282] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.285285] pci 0000:00:02.0: PME# disabled [ 0.285303] pci 0000:00:02.1: reg 10 32bit mmio: [0xfe02e000-0xfe02e0ff] [ 0.285325] pci 0000:00:02.1: supports D1 D2 [ 0.285327] pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold [ 0.285329] pci 0000:00:02.1: PME# disabled [ 0.285381] pci 0000:00:05.0: reg 10 32bit mmio: [0xfe024000-0xfe027fff] [ 0.285403] pci 0000:00:05.0: PME# supported from D3hot D3cold [ 0.285405] pci 0000:00:05.0: PME# disabled [ 0.285433] pci 0000:00:06.0: reg 20 io port: [0xf000-0xf00f] [ 0.285463] pci 0000:00:07.0: reg 10 32bit mmio: [0xfe02d000-0xfe02dfff] [ 0.285466] pci 0000:00:07.0: reg 14 io port: [0xec00-0xec07] [ 0.285484] pci 0000:00:07.0: supports D1 D2 [ 0.285485] pci 0000:00:07.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.285489] pci 0000:00:07.0: PME# disabled [ 0.285505] pci 0000:00:08.0: reg 10 io port: [0x9f0-0x9f7] [ 0.285508] pci 0000:00:08.0: reg 14 io port: [0xbf0-0xbf3] [ 0.285511] pci 0000:00:08.0: reg 18 io port: [0x970-0x977] [ 0.285514] pci 0000:00:08.0: reg 1c io port: [0xb70-0xb73] [ 0.285516] pci 0000:00:08.0: reg 20 io port: [0xd800-0xd80f] [ 0.285519] pci 0000:00:08.0: reg 24 32bit mmio: [0xfe02c000-0xfe02cfff] [ 0.285543] pci 0000:00:08.1: reg 10 io port: [0x9e0-0x9e7] [ 0.285546] pci 0000:00:08.1: reg 14 io port: [0xbe0-0xbe3] [ 0.285548] pci 0000:00:08.1: reg 18 io port: [0x960-0x967] [ 0.285551] pci 0000:00:08.1: reg 1c io port: [0xb60-0xb63] [ 0.285554] pci 0000:00:08.1: reg 20 io port: [0xc400-0xc40f] [ 0.285557] pci 0000:00:08.1: reg 24 32bit mmio: [0xfe02b000-0xfe02bfff] [ 0.285593] pci 0000:00:09.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.285595] pci 0000:00:09.0: PME# disabled [ 0.285619] pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.285620] pci 0000:00:0b.0: PME# disabled [ 0.285705] pci 0000:01:05.0: reg 10 32bit mmio: [0xfdeff000-0xfdefffff] [ 0.285733] pci 0000:01:05.0: supports D1 D2 [ 0.285734] pci 0000:01:05.0: PME# supported from D0 D1 D2 D3hot [ 0.285737] pci 0000:01:05.0: PME# disabled [ 0.285762] pci 0000:00:04.0: transparent bridge [ 0.285765] pci 0000:00:04.0: bridge io port: [0xb000-0xbfff] [ 0.285767] pci 0000:00:04.0: bridge 32bit mmio: [0xfde00000-0xfdefffff] [ 0.285770] pci 0000:00:04.0: bridge 32bit mmio pref: [0xfdd00000-0xfddfffff] [ 0.285790] pci 0000:02:00.0: reg 10 32bit mmio: [0xfa000000-0xfaffffff] [ 0.285796] pci 0000:02:00.0: reg 14 64bit mmio: [0xe0000000-0xefffffff] [ 0.285802] pci 0000:02:00.0: reg 1c 64bit mmio: [0xf8000000-0xf9ffffff] [ 0.285806] pci 0000:02:00.0: reg 24 io port: [0xac00-0xac7f] [ 0.285810] pci 0000:02:00.0: reg 30 32bit mmio: [0xfbf80000-0xfbffffff] [ 0.285859] pci 0000:00:09.0: bridge io port: [0xa000-0xafff] [ 0.285861] pci 0000:00:09.0: bridge 32bit mmio: [0xf8000000-0xfbffffff] [ 0.285864] pci 0000:00:09.0: bridge 64bit mmio pref: [0xe0000000-0xefffffff] [ 0.285895] pci 0000:00:0b.0: bridge io port: [0x9000-0x9fff] [ 0.285897] pci 0000:00:0b.0: bridge 32bit mmio: [0xfdc00000-0xfdcfffff] [ 0.285899] pci 0000:00:0b.0: bridge 64bit mmio pref: [0xfdb00000-0xfdbfffff] [ 0.285907] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.286031] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT] [ 0.315962] ACPI: PCI Interrupt Link [LNK1] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.316074] ACPI: PCI Interrupt Link [LNK2] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.316185] ACPI: PCI Interrupt Link [LNK3] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.316296] ACPI: PCI Interrupt Link [LNK4] (IRQs 5 *7 9 10 11 14 15) [ 0.316405] ACPI: PCI Interrupt Link [LNK5] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.316518] ACPI: PCI Interrupt Link [LNK6] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.316628] ACPI: PCI Interrupt Link [LNK7] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.316739] ACPI: PCI Interrupt Link [LNK8] (IRQs 5 *7 9 10 11 14 15) [ 0.316849] ACPI: PCI Interrupt Link [LIGP] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.316959] ACPI: PCI Interrupt Link [LP2P] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.317070] ACPI: PCI Interrupt Link [LUBA] (IRQs 5 7 9 *10 11 14 15) [ 0.317180] ACPI: PCI Interrupt Link [LMAC] (IRQs *5 7 9 10 11 14 15) [ 0.317291] ACPI: PCI Interrupt Link [LAZA] (IRQs 5 7 9 10 *11 14 15) [ 0.317401] ACPI: PCI Interrupt Link [LPMU] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.317512] ACPI: PCI Interrupt Link [LSMB] (IRQs 5 *7 9 10 11 14 15) [ 0.317623] ACPI: PCI Interrupt Link [LUB2] (IRQs 5 7 9 10 *11 14 15) [ 0.317732] ACPI: PCI Interrupt Link [LIDE] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.317844] ACPI: PCI Interrupt Link [LSID] (IRQs 5 7 9 10 *11 14 15) [ 0.317955] ACPI: PCI Interrupt Link [LFID] (IRQs 5 7 9 *10 11 14 15) [ 0.318096] ACPI: PCI Interrupt Link [APC1] (IRQs 16) *0, disabled. [ 0.318234] ACPI: PCI Interrupt Link [APC2] (IRQs 17) *0, disabled. [ 0.318371] ACPI: PCI Interrupt Link [APC3] (IRQs 18) *0, disabled. [ 0.318508] ACPI: PCI Interrupt Link [APC4] (IRQs 19) *0 [ 0.318645] ACPI: PCI Interrupt Link [APC5] (IRQs 16) *0, disabled. [ 0.318782] ACPI: PCI Interrupt Link [APC6] (IRQs 16) *0, disabled. [ 0.318920] ACPI: PCI Interrupt Link [APC7] (IRQs 16) *0, disabled. [ 0.319057] ACPI: PCI Interrupt Link [APC8] (IRQs 16) *0 [ 0.319195] ACPI: PCI Interrupt Link [AIGP] (IRQs 22 23) *0, disabled. [ 0.319333] ACPI: PCI Interrupt Link [APCF] (IRQs 22 23) *0 [ 0.319472] ACPI: PCI Interrupt Link [APCH] (IRQs 22 23) *0 [ 0.319612] ACPI: PCI Interrupt Link [APMU] (IRQs 22 23) *0, disabled. [ 0.319751] ACPI: PCI Interrupt Link [AAZA] (IRQs 22 23) *0 [ 0.319888] ACPI: PCI Interrupt Link [APCS] (IRQs 22 23) *0 [ 0.320051] ACPI: PCI Interrupt Link [APCL] (IRQs 22 23) *0 [ 0.320189] ACPI: PCI Interrupt Link [APCM] (IRQs 22 23) *0, disabled. [ 0.320331] ACPI: PCI Interrupt Link [APCZ] (IRQs 22 23) *0, disabled. [ 0.320470] ACPI: PCI Interrupt Link [APSI] (IRQs 20) *0 [ 0.320608] ACPI: PCI Interrupt Link [APSJ] (IRQs 21) *0 [ 0.320751] SCSI subsystem initialized [ 0.320790] libata version 3.00 loaded. [ 0.320790] usbcore: registered new interface driver usbfs [ 0.320790] usbcore: registered new interface driver hub [ 0.320790] usbcore: registered new device driver usb [ 0.320790] ACPI: WMI: Mapper loaded [ 0.320790] PCI: Using ACPI for IRQ routing [ 0.350005] Bluetooth: Core ver 2.15 [ 0.350019] NET: Registered protocol family 31 [ 0.350019] Bluetooth: HCI device and connection manager initialized [ 0.350019] Bluetooth: HCI socket layer initialized [ 0.350019] NetLabel: Initializing [ 0.350019] NetLabel: domain hash size = 128 [ 0.350019] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.350026] NetLabel: unlabeled traffic allowed by default [ 0.350129] PCI-DMA: Disabling AGP. [ 0.350197] PCI-DMA: aperture base @ 20000000 size 65536 KB [ 0.350198] PCI-DMA: using GART IOMMU. [ 0.350202] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture [ 0.350604] hpet0: at MMIO 0xfefff000, IRQs 2, 8, 31 [ 0.350609] hpet0: 3 comparators, 32-bit 25.000000 MHz counter [ 0.370016] Switched to high resolution mode on CPU 0 [ 0.370113] Switched to high resolution mode on CPU 1 [ 0.390014] pnp: PnP ACPI init [ 0.390031] ACPI: bus type pnp registered [ 0.393111] pnp: PnP ACPI: found 12 devices [ 0.393113] ACPI: ACPI bus type pnp unregistered [ 0.393121] system 00:01: ioport range 0x1000-0x107f has been reserved [ 0.393123] system 00:01: ioport range 0x1080-0x10ff has been reserved [ 0.393125] system 00:01: ioport range 0x1400-0x147f has been reserved [ 0.393127] system 00:01: ioport range 0x1480-0x14ff has been reserved [ 0.393129] system 00:01: ioport range 0x1800-0x187f has been reserved [ 0.393131] system 00:01: ioport range 0x1880-0x18ff has been reserved [ 0.393135] system 00:02: ioport range 0x4d0-0x4d1 has been reserved [ 0.393137] system 00:02: ioport range 0x800-0x87f has been reserved [ 0.393139] system 00:02: ioport range 0x294-0x297 has been reserved [ 0.393147] system 00:0a: iomem range 0xf0000000-0xf3ffffff has been reserved [ 0.393151] system 00:0b: iomem range 0xfefff000-0xfefff0ff has been reserved [ 0.393153] system 00:0b: iomem range 0xffff0000-0xffffffff has been reserved [ 0.393155] system 00:0b: iomem range 0xfec00000-0xfec00fff could not be reserved [ 0.393157] system 00:0b: iomem range 0xfee00000-0xfeefffff has been reserved [ 0.393160] system 00:0b: iomem range 0xfefff000-0xfeffffff could not be reserved [ 0.393162] system 00:0b: iomem range 0xfff80000-0xfff80fff has been reserved [ 0.393164] system 00:0b: iomem range 0xfff90000-0xfffbffff has been reserved [ 0.393166] system 00:0b: iomem range 0xfffed000-0xfffeffff has been reserved [ 0.397799] AppArmor: AppArmor Filesystem Enabled [ 0.397818] pci 0000:00:04.0: PCI bridge, secondary bus 0000:01 [ 0.397820] pci 0000:00:04.0: IO window: 0xb000-0xbfff [ 0.397823] pci 0000:00:04.0: MEM window: 0xfde00000-0xfdefffff [ 0.397826] pci 0000:00:04.0: PREFETCH window: 0xfdd00000-0xfddfffff [ 0.397829] pci 0000:00:09.0: PCI bridge, secondary bus 0000:02 [ 0.397831] pci 0000:00:09.0: IO window: 0xa000-0xafff [ 0.397833] pci 0000:00:09.0: MEM window: 0xf8000000-0xfbffffff [ 0.397836] pci 0000:00:09.0: PREFETCH window: 0x000000e0000000-0x000000efffffff [ 0.397838] pci 0000:00:0b.0: PCI bridge, secondary bus 0000:03 [ 0.397840] pci 0000:00:0b.0: IO window: 0x9000-0x9fff [ 0.397842] pci 0000:00:0b.0: MEM window: 0xfdc00000-0xfdcfffff [ 0.397844] pci 0000:00:0b.0: PREFETCH window: 0x000000fdb00000-0x000000fdbfffff [ 0.397851] pci 0000:00:04.0: setting latency timer to 64 [ 0.397855] pci 0000:00:09.0: setting latency timer to 64 [ 0.397858] pci 0000:00:0b.0: setting latency timer to 64 [ 0.397861] pci_bus 0000:00: resource 0 io: [0x00-0xffff] [ 0.397863] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff] [ 0.397865] pci_bus 0000:01: resource 0 io: [0xb000-0xbfff] [ 0.397867] pci_bus 0000:01: resource 1 mem: [0xfde00000-0xfdefffff] [ 0.397869] pci_bus 0000:01: resource 2 pref mem [0xfdd00000-0xfddfffff] [ 0.397870] pci_bus 0000:01: resource 3 io: [0x00-0xffff] [ 0.397872] pci_bus 0000:01: resource 4 mem: [0x000000-0xffffffffffffffff] [ 0.397874] pci_bus 0000:02: resource 0 io: [0xa000-0xafff] [ 0.397876] pci_bus 0000:02: resource 1 mem: [0xf8000000-0xfbffffff] [ 0.397877] pci_bus 0000:02: resource 2 pref mem [0xe0000000-0xefffffff] [ 0.397879] pci_bus 0000:03: resource 0 io: [0x9000-0x9fff] [ 0.397881] pci_bus 0000:03: resource 1 mem: [0xfdc00000-0xfdcfffff] [ 0.397883] pci_bus 0000:03: resource 2 pref mem [0xfdb00000-0xfdbfffff] [ 0.397912] NET: Registered protocol family 2 [ 0.398049] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.399300] TCP established hash table entries: 524288 (order: 11, 8388608 bytes) [ 0.402703] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.403121] TCP: Hash tables configured (established 524288 bind 65536) [ 0.403123] TCP reno registered [ 0.403201] NET: Registered protocol family 1 [ 0.403256] Trying to unpack rootfs image as initramfs... [ 0.517699] Freeing initrd memory: 6723k freed [ 0.520755] Scanning for low memory corruption every 60 seconds [ 0.520860] audit: initializing netlink socket (disabled) [ 0.520871] type=2000 audit(1254860071.520:1): initialized [ 0.527278] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.528357] VFS: Disk quotas dquot_6.5.2 [ 0.528398] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.528858] fuse init (API version 7.12) [ 0.528919] msgmni has been set to 7924 [ 0.529114] alg: No test for stdrng (krng) [ 0.529133] io scheduler noop registered [ 0.529135] io scheduler anticipatory registered [ 0.529137] io scheduler deadline registered (default) [ 0.529168] io scheduler cfq registered [ 0.543369] pci 0000:00:00.0: Found enabled HT MSI Mapping [ 0.543414] pci 0000:00:00.0: Found enabled HT MSI Mapping [ 0.543466] pci 0000:00:00.0: Found enabled HT MSI Mapping [ 0.543517] pci 0000:00:00.0: Found enabled HT MSI Mapping [ 0.543567] pci 0000:00:00.0: Found enabled HT MSI Mapping [ 0.543621] pci 0000:00:00.0: Found enabled HT MSI Mapping [ 0.543679] pci 0000:00:00.0: Found enabled HT MSI Mapping [ 0.543695] pci 0000:02:00.0: Boot video device [ 0.543832] alloc irq_desc for 24 on node 0 [ 0.543834] alloc kstat_irqs on node 0 [ 0.543839] pcieport-driver 0000:00:09.0: irq 24 for MSI/MSI-X [ 0.543843] pcieport-driver 0000:00:09.0: setting latency timer to 64 [ 0.543934] alloc irq_desc for 25 on node 0 [ 0.543936] alloc kstat_irqs on node 0 [ 0.543939] pcieport-driver 0000:00:0b.0: irq 25 for MSI/MSI-X [ 0.543942] pcieport-driver 0000:00:0b.0: setting latency timer to 64 [ 0.543988] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.544006] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 0.544098] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0 [ 0.544101] ACPI: Power Button [PWRF] [ 0.544140] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1 [ 0.544142] ACPI: Power Button [PWRB] [ 0.544185] fan PNP0C0B:00: registered as cooling_device0 [ 0.544189] ACPI: Fan [FAN] (on) [ 0.544503] processor LNXCPU:00: registered as cooling_device1 [ 0.544528] processor LNXCPU:01: registered as cooling_device2 [ 0.547434] thermal LNXTHERM:01: registered as thermal_zone0 [ 0.547439] ACPI: Thermal Zone [THRM] (23 C) [ 0.548298] Linux agpgart interface v0.103 [ 0.548307] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.549117] brd: module loaded [ 0.549416] loop: module loaded [ 0.549479] input: Macintosh mouse button emulation as /devices/virtual/input/input2 [ 0.549681] sata_nv 0000:00:08.0: version 3.5 [ 0.549965] ACPI: PCI Interrupt Link [APSI] enabled at IRQ 20 [ 0.549969] alloc irq_desc for 20 on node 0 [ 0.549970] alloc kstat_irqs on node 0 [ 0.549979] sata_nv 0000:00:08.0: PCI INT A -> Link[APSI] -> GSI 20 (level, low) -> IRQ 20 [ 0.550051] sata_nv 0000:00:08.0: setting latency timer to 64 [ 0.550118] scsi0 : sata_nv [ 0.550205] scsi1 : sata_nv [ 0.550318] ata1: SATA max UDMA/133 cmd 0x9f0 ctl 0xbf0 bmdma 0xd800 irq 20 [ 0.550320] ata2: SATA max UDMA/133 cmd 0x970 ctl 0xb70 bmdma 0xd808 irq 20 [ 0.550601] ACPI: PCI Interrupt Link [APSJ] enabled at IRQ 21 [ 0.550604] alloc irq_desc for 21 on node 0 [ 0.550605] alloc kstat_irqs on node 0 [ 0.550611] sata_nv 0000:00:08.1: PCI INT B -> Link[APSJ] -> GSI 21 (level, low) -> IRQ 21 [ 0.550635] sata_nv 0000:00:08.1: setting latency timer to 64 [ 0.550679] scsi2 : sata_nv [ 0.550727] scsi3 : sata_nv [ 0.550835] ata3: SATA max UDMA/133 cmd 0x9e0 ctl 0xbe0 bmdma 0xc400 irq 21 [ 0.550837] ata4: SATA max UDMA/133 cmd 0x960 ctl 0xb60 bmdma 0xc408 irq 21 [ 0.550973] pata_amd 0000:00:06.0: version 0.4.1 [ 0.550999] pata_amd 0000:00:06.0: setting latency timer to 64 [ 0.551059] scsi4 : pata_amd [ 0.551105] scsi5 : pata_amd [ 0.551551] ata5: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000 irq 14 [ 0.551553] ata6: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xf008 irq 15 [ 0.552002] Fixed MDIO Bus: probed [ 0.552031] PPP generic driver version 2.4.2 [ 0.552114] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.552386] ACPI: PCI Interrupt Link [APCL] enabled at IRQ 23 [ 0.552390] alloc irq_desc for 23 on node 0 [ 0.552391] alloc kstat_irqs on node 0 [ 0.552399] ehci_hcd 0000:00:02.1: PCI INT B -> Link[APCL] -> GSI 23 (level, low) -> IRQ 23 [ 0.552409] ehci_hcd 0000:00:02.1: setting latency timer to 64 [ 0.552411] ehci_hcd 0000:00:02.1: EHCI Host Controller [ 0.552454] ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 1 [ 0.552478] ehci_hcd 0000:00:02.1: debug port 1 [ 0.552482] ehci_hcd 0000:00:02.1: cache line size of 64 is not supported [ 0.552499] ehci_hcd 0000:00:02.1: irq 23, io mem 0xfe02e000 [ 0.570034] ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00 [ 0.570085] usb usb1: configuration #1 chosen from 1 choice [ 0.570105] hub 1-0:1.0: USB hub found [ 0.570112] hub 1-0:1.0: 10 ports detected [ 0.570173] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.570591] ACPI: PCI Interrupt Link [APCF] enabled at IRQ 22 [ 0.570594] alloc irq_desc for 22 on node 0 [ 0.570595] alloc kstat_irqs on node 0 [ 0.570602] ohci_hcd 0000:00:02.0: PCI INT A -> Link[APCF] -> GSI 22 (level, low) -> IRQ 22 [ 0.570612] ohci_hcd 0000:00:02.0: setting latency timer to 64 [ 0.570614] ohci_hcd 0000:00:02.0: OHCI Host Controller [ 0.570645] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2 [ 0.570669] ohci_hcd 0000:00:02.0: irq 22, io mem 0xfe02f000 [ 0.632054] usb usb2: configuration #1 chosen from 1 choice [ 0.632072] hub 2-0:1.0: USB hub found [ 0.632079] hub 2-0:1.0: 10 ports detected [ 0.632130] uhci_hcd: USB Universal Host Controller Interface driver [ 0.632222] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 0.634406] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.634411] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 0.634475] mice: PS/2 mouse device common for all mice [ 0.634542] rtc_cmos 00:05: RTC can wake from S4 [ 0.634567] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0 [ 0.634603] rtc0: alarms up to one year, y3k, 242 bytes nvram, hpet irqs [ 0.634687] device-mapper: uevent: version 1.0.3 [ 0.634786] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com [ 0.634864] device-mapper: multipath: version 1.1.0 loaded [ 0.634866] device-mapper: multipath round-robin: version 1.0.0 loaded [ 0.635020] cpuidle: using governor ladder [ 0.635021] cpuidle: using governor menu [ 0.635321] TCP cubic registered [ 0.635413] NET: Registered protocol family 10 [ 0.635702] lo: Disabled Privacy Extensions [ 0.635893] NET: Registered protocol family 17 [ 0.635909] Bluetooth: L2CAP ver 2.13 [ 0.635910] Bluetooth: L2CAP socket layer initialized [ 0.635912] Bluetooth: SCO (Voice Link) ver 0.6 [ 0.635913] Bluetooth: SCO socket layer initialized [ 0.635953] Bluetooth: RFCOMM TTY layer initialized [ 0.635955] Bluetooth: RFCOMM socket layer initialized [ 0.635957] Bluetooth: RFCOMM ver 1.11 [ 0.635963] powernow-k8: Found 1 AMD Athlon(tm) 64 X2 Dual Core Processor 5800+ processors (2 cpu cores) (version 2.20.00) [ 0.636013] powernow-k8: 0 : fid 0x16 (3000 MHz), vid 0x7 [ 0.636015] powernow-k8: 1 : fid 0x14 (2800 MHz), vid 0x9 [ 0.636016] powernow-k8: 2 : fid 0x12 (2600 MHz), vid 0xb [ 0.636018] powernow-k8: 3 : fid 0x10 (2400 MHz), vid 0xd [ 0.636019] powernow-k8: 4 : fid 0xe (2200 MHz), vid 0xf [ 0.636021] powernow-k8: 5 : fid 0xc (2000 MHz), vid 0x11 [ 0.636023] powernow-k8: 6 : fid 0xa (1800 MHz), vid 0x11 [ 0.636025] powernow-k8: 7 : fid 0x2 (1000 MHz), vid 0x12 [ 0.636117] PM: Resume from disk failed. [ 0.636130] registered taskstats version 1 [ 0.636223] Magic number: 13:763:244 [ 0.636307] rtc_cmos 00:05: setting system clock to 2009-10-06 20:14:31 UTC (1254860071) [ 0.636310] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 0.636311] EDD information not available. [ 0.654538] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3 [ 0.710034] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 0.712532] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 0.730127] ata3.00: ATAPI: HL-DT-ST DVD-RW GSA-H60L, DC08, max UDMA/100 [ 0.762599] ata1.00: HPA unlocked: 976771055 -> 976773168, native 976773168 [ 0.762603] ata1.00: ATA-8: WDC WD5000AAKS-22YGA0, 12.01C02, max UDMA/133 [ 0.762605] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32) [ 0.770126] ata3.00: configured for UDMA/100 [ 0.801168] ata1.00: configured for UDMA/133 [ 0.801233] scsi 0:0:0:0: Direct-Access ATA WDC WD5000AAKS-2 12.0 PQ: 0 ANSI: 5 [ 0.801315] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 0.801343] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB) [ 0.801372] sd 0:0:0:0: [sda] Write Protect is off [ 0.801374] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 0.801389] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 0.801481] sda: sda1 sda2 < sda5 > [ 0.824882] sd 0:0:0:0: [sda] Attached SCSI disk [ 0.890015] usb 1-8: new high speed USB device using ehci_hcd and address 2 [ 0.962529] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1.000110] ata2.00: HPA unlocked: 1465147055 -> 1465149168, native 1465149168 [ 1.000114] ata2.00: ATA-7: SAMSUNG HD753LJ, 1AA01109, max UDMA7 [ 1.000116] ata2.00: 1465149168 sectors, multi 16: LBA48 NCQ (depth 0/32) [ 1.022702] ata2.00: configured for UDMA/133 [ 1.022739] scsi 1:0:0:0: Direct-Access ATA SAMSUNG HD753LJ 1AA0 PQ: 0 ANSI: 5 [ 1.022813] sd 1:0:0:0: Attached scsi generic sg1 type 0 [ 1.022835] sd 1:0:0:0: [sdb] 1465149168 512-byte logical blocks: (750 GB/698 GiB) [ 1.022861] sd 1:0:0:0: [sdb] Write Protect is off [ 1.022862] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 1.022876] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.022943] sdb: [ 1.026300] scsi 2:0:0:0: CD-ROM HL-DT-ST DVD-RW GSA-H60L DC08 PQ: 0 ANSI: 5 [ 1.028124] sdb1 [ 1.028249] sd 1:0:0:0: [sdb] Attached SCSI disk [ 1.037297] sr0: scsi3-mmc drive: 40x/40x writer dvd-ram cd/rw xa/form2 cdda tray [ 1.037300] Uniform CD-ROM driver Revision: 3.20 [ 1.037344] sr 2:0:0:0: Attached scsi CD-ROM sr0 [ 1.037372] sr 2:0:0:0: Attached scsi generic sg2 type 5 [ 1.047678] ata4: SATA link down (SStatus 0 SControl 300) [ 1.047712] ata6: port disabled. ignoring. [ 1.047737] Freeing unused kernel memory: 660k freed [ 1.048002] Write protecting the kernel read-only data: 7544k [ 1.049687] usb 1-8: configuration #1 chosen from 1 choice [ 1.198866] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.64. [ 1.199177] ACPI: PCI Interrupt Link [APCH] enabled at IRQ 23 [ 1.199183] forcedeth 0000:00:07.0: PCI INT A -> Link[APCH] -> GSI 23 (level, low) -> IRQ 23 [ 1.199186] forcedeth 0000:00:07.0: setting latency timer to 64 [ 1.263293] ACPI: PCI Interrupt Link [APC4] enabled at IRQ 19 [ 1.263298] alloc irq_desc for 19 on node 0 [ 1.263300] alloc kstat_irqs on node 0 [ 1.263310] ohci1394 0000:01:05.0: PCI INT A -> Link[APC4] -> GSI 19 (level, low) -> IRQ 19 [ 1.266077] Initializing USB Mass Storage driver... [ 1.266196] scsi6 : SCSI emulation for USB Mass Storage devices [ 1.266319] usbcore: registered new interface driver usb-storage [ 1.266322] USB Mass Storage support registered. [ 1.266532] usb-storage: device found at 2 [ 1.266534] usb-storage: waiting for device to settle before scanning [ 1.322060] ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[19] MMIO=[fdeff000-fdeff7ff] Max Packet=[1024] IR/IT contexts=[8/8] [ 1.720827] forcedeth 0000:00:07.0: ifname eth0, PHY OUI 0x732 @ 1, addr 00:1e:8c:40:34:ba [ 1.720831] forcedeth 0000:00:07.0: highdma pwrctl mgmt lnktim msi desc-v3 [ 1.843571] PM: Starting manual resume from disk [ 1.843574] PM: Resume from partition 8:5 [ 1.843576] PM: Checking hibernation image. [ 1.843775] PM: Resume from disk failed. [ 1.886308] EXT4-fs (sda1): barriers enabled [ 1.904817] kjournald2 starting: pid 403, dev sda1:8, commit interval 5 seconds [ 1.904835] EXT4-fs (sda1): delayed allocation enabled [ 1.904837] EXT4-fs: file extents enabled [ 1.953256] EXT4-fs: mballoc enabled [ 1.953270] EXT4-fs (sda1): mounted filesystem with ordered data mode [ 2.480245] type=1505 audit(1254860073.336:2): operation="profile_load" pid=424 name=/usr/share/gdm/guest-session/Xsession [ 2.482327] type=1505 audit(1254860073.336:3): operation="profile_load" pid=425 name=/sbin/dhclient3 [ 2.482538] type=1505 audit(1254860073.346:4): operation="profile_load" pid=425 name=/usr/lib/NetworkManager/nm-dhcp-client.action [ 2.482655] type=1505 audit(1254860073.346:5): operation="profile_load" pid=425 name=/usr/lib/connman/scripts/dhclient-script [ 2.514438] type=1505 audit(1254860073.376:6): operation="profile_load" pid=426 name=/usr/bin/evince [ 2.517241] type=1505 audit(1254860073.376:7): operation="profile_load" pid=426 name=/usr/bin/evince-previewer [ 2.518931] type=1505 audit(1254860073.376:8): operation="profile_load" pid=426 name=/usr/bin/evince-thumbnailer [ 2.531157] type=1505 audit(1254860073.386:9): operation="profile_load" pid=428 name=/usr/lib/cups/backend/cups-pdf [ 2.531404] type=1505 audit(1254860073.386:10): operation="profile_load" pid=428 name=/usr/sbin/cupsd [ 2.642647] ieee1394: Host added: ID:BUS[0-00:1023] GUID[001e8c00000c6bc3] [ 3.808180] udev: starting version 147 [ 5.839067] Adding 11888060k swap on /dev/sda5. Priority:-1 extents:1 across:11888060k [ 5.916244] EXT4-fs (sda1): internal journal on sda1:8 [ 6.270184] usb-storage: device scan complete [ 6.270783] scsi 6:0:0:0: Direct-Access Generic USB SD Reader 1.00 PQ: 0 ANSI: 0 [ 6.271402] scsi 6:0:0:1: Direct-Access Generic USB CF Reader 1.01 PQ: 0 ANSI: 0 [ 6.272026] scsi 6:0:0:2: Direct-Access Generic USB SM Reader 1.02 PQ: 0 ANSI: 0 [ 6.272651] scsi 6:0:0:3: Direct-Access Generic USB MS Reader 1.03 PQ: 0 ANSI: 0 [ 6.272924] sd 6:0:0:0: Attached scsi generic sg3 type 0 [ 6.273003] sd 6:0:0:1: Attached scsi generic sg4 type 0 [ 6.273077] sd 6:0:0:2: Attached scsi generic sg5 type 0 [ 6.273146] sd 6:0:0:3: Attached scsi generic sg6 type 0 [ 6.281418] sd 6:0:0:0: [sdc] Attached SCSI removable disk [ 6.294040] sd 6:0:0:3: [sdf] Attached SCSI removable disk [ 6.295122] sd 6:0:0:1: [sdd] Attached SCSI removable disk [ 6.295131] sd 6:0:0:2: [sde] Attached SCSI removable disk [ 7.673442] __ratelimit: 3 callbacks suppressed [ 7.673445] type=1505 audit(1254860078.536:12): operation="profile_replace" pid=842 name=/usr/share/gdm/guest-session/Xsession [ 7.674952] type=1505 audit(1254860078.536:13): operation="profile_replace" pid=843 name=/sbin/dhclient3 [ 7.675147] type=1505 audit(1254860078.536:14): operation="profile_replace" pid=843 name=/usr/lib/NetworkManager/nm-dhcp-client.action [ 7.675263] type=1505 audit(1254860078.536:15): operation="profile_replace" pid=843 name=/usr/lib/connman/scripts/dhclient-script [ 7.678443] type=1505 audit(1254860078.536:16): operation="profile_replace" pid=844 name=/usr/bin/evince [ 7.681279] type=1505 audit(1254860078.536:17): operation="profile_replace" pid=844 name=/usr/bin/evince-previewer [ 7.682974] type=1505 audit(1254860078.546:18): operation="profile_replace" pid=844 name=/usr/bin/evince-thumbnailer [ 7.687468] type=1505 audit(1254860078.546:19): operation="profile_replace" pid=846 name=/usr/lib/cups/backend/cups-pdf [ 7.687718] type=1505 audit(1254860078.546:20): operation="profile_replace" pid=846 name=/usr/sbin/cupsd [ 7.689347] type=1505 audit(1254860078.546:21): operation="profile_replace" pid=847 name=/usr/sbin/tcpdump [ 9.841397] nvidia: module license 'NVIDIA' taints kernel. [ 9.841402] Disabling lock debugging due to kernel taint [ 9.920649] k8temp 0000:00:18.3: Temperature readouts might be wrong - check erratum #141 [ 10.009565] EDAC MC: Ver: 2.1.0 Oct 2 2009 [ 10.047609] EDAC amd64_edac: Ver: 3.2.0 Oct 2 2009 [ 10.047680] EDAC amd64: This node reports that Memory ECC is currently disabled. [ 10.047683] EDAC amd64: bit 0x400000 in register F3x44 of the MISC_CONTROL device (0000:00:18.3) should be enabled [ 10.047685] EDAC amd64: bit 0x0000000000000010 in MSR 0x0000017b of node 0 should be enabled [ 10.047687] EDAC amd64: WARNING: ECC is NOT currently enabled by the BIOS. Module will NOT be loaded. [ 10.047688] Either Enable ECC in the BIOS, or use the 'ecc_enable_override' parameter. [ 10.047689] Might be a BIOS bug, if BIOS says ECC is enabled [ 10.047690] Use of the override can cause unknown side effects. [ 10.047710] amd64_edac: probe of 0000:00:18.2 failed with error -22 [ 10.099288] i2c-adapter i2c-0: nForce2 SMBus adapter at 0x1c00 [ 10.099305] i2c-adapter i2c-1: nForce2 SMBus adapter at 0x1c40 [ 10.101109] ACPI: PCI Interrupt Link [APC8] enabled at IRQ 16 [ 10.101115] alloc irq_desc for 16 on node 0 [ 10.101116] alloc kstat_irqs on node 0 [ 10.101126] nvidia 0000:02:00.0: PCI INT A -> Link[APC8] -> GSI 16 (level, low) -> IRQ 16 [ 10.101132] nvidia 0000:02:00.0: setting latency timer to 64 [ 10.101290] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 185.18.36 Fri Aug 14 17:35:21 PDT 2009 [ 10.132568] lp: driver loaded but no devices found [ 10.151637] ip_tables: (C) 2000-2006 Netfilter Core Team