[ 0.000000] BIOS EBDA/lowmem at: 0009fc00/0009fc00 [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.28-16-generic (buildd@vernadsky) (gcc version 4.3.3 (Ubuntu 4.3.3-5ubuntu4) ) #55-Ubuntu SMP Tue Oct 20 19:48:24 UTC 2009 (Ubuntu 2.6.28-16.55-generic) [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] NSC Geode by NSC [ 0.000000] Cyrix CyrixInstead [ 0.000000] Centaur CentaurHauls [ 0.000000] Transmeta GenuineTMx86 [ 0.000000] Transmeta TransmetaCPU [ 0.000000] UMC UMC UMC UMC [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 00000000000a0000 (usable) [ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000007ff77000 (usable) [ 0.000000] BIOS-e820: 000000007ff77000 - 000000007ff79000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000007ff79000 - 0000000080000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee10000 (reserved) [ 0.000000] BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved) [ 0.000000] DMI 2.3 present. [ 0.000000] last_pfn = 0x7ff77 max_arch_pfn = 0x100000 [ 0.000000] Scanning 2 areas for low memory corruption [ 0.000000] modified physical RAM map: [ 0.000000] modified: 0000000000000000 - 0000000000002000 (usable) [ 0.000000] modified: 0000000000002000 - 0000000000006000 (reserved) [ 0.000000] modified: 0000000000006000 - 0000000000007000 (usable) [ 0.000000] modified: 0000000000007000 - 0000000000010000 (reserved) [ 0.000000] modified: 0000000000010000 - 0000000000093000 (usable) [ 0.000000] modified: 00000000000f0000 - 0000000000100000 (reserved) [ 0.000000] modified: 0000000000100000 - 000000007ff77000 (usable) [ 0.000000] modified: 000000007ff77000 - 000000007ff79000 (ACPI NVS) [ 0.000000] modified: 000000007ff79000 - 0000000080000000 (reserved) [ 0.000000] modified: 00000000fec00000 - 00000000fec10000 (reserved) [ 0.000000] modified: 00000000fee00000 - 00000000fee10000 (reserved) [ 0.000000] modified: 00000000ffb00000 - 0000000100000000 (reserved) [ 0.000000] kernel direct mapping tables up to 373fe000 @ 10000-16000 [ 0.000000] RAMDISK: 378b0000 - 37feff66 [ 0.000000] Allocated new RAMDISK: 0087d000 - 00fbcf66 [ 0.000000] Move RAMDISK from 00000000378b0000 - 0000000037feff65 to 0087d000 - 00fbcf65 [ 0.000000] ACPI: RSDP 000FD550, 0014 (r0 DELL ) [ 0.000000] ACPI: RSDT 000FD564, 0034 (r1 DELL WS 530 8 ASL 61) [ 0.000000] ACPI: FACP 000FD598, 0074 (r1 DELL WS 530 8 ASL 61) [ 0.000000] ACPI: DSDT FFFE3C22, 2633 (r1 DELL dt_ex 1000 MSFT 100000D) [ 0.000000] ACPI: FACS 7FF77000, 0040 [ 0.000000] ACPI: SSDT FFFE6392, 00BA (r1 DELL st_ex 1000 MSFT 100000D) [ 0.000000] ACPI: APIC 000FD60C, 006C (r1 DELL WS 530 8 ASL 61) [ 0.000000] ACPI: BOOT 000FD678, 0028 (r1 DELL WS 530 8 ASL 61) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] 1163MB HIGHMEM available. [ 0.000000] 883MB LOWMEM available. [ 0.000000] mapped low ram: 0 - 373fe000 [ 0.000000] low ram: 00000000 - 373fe000 [ 0.000000] bootmap 00012000 - 00018e80 [ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 00373fe000] [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] [ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000] [ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000] [ 0.000000] #3 [0000100000 - 00008780ac] TEXT DATA BSS ==> [0000100000 - 00008780ac] [ 0.000000] #4 [0000879000 - 000087d000] INIT_PG_TABLE ==> [0000879000 - 000087d000] [ 0.000000] #5 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 0000100000] [ 0.000000] #6 [0000010000 - 0000012000] PGTABLE ==> [0000010000 - 0000012000] [ 0.000000] #7 [000087d000 - 0000fbcf66] NEW RAMDISK ==> [000087d000 - 0000fbcf66] [ 0.000000] #8 [0000012000 - 0000019000] BOOTMAP ==> [0000012000 - 0000019000] [ 0.000000] found SMP MP-table at [c00fe710] 000fe710 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000000 -> 0x00001000 [ 0.000000] Normal 0x00001000 -> 0x000373fe [ 0.000000] HighMem 0x000373fe -> 0x0007ff77 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[4] active PFN ranges [ 0.000000] 0: 0x00000000 -> 0x00000002 [ 0.000000] 0: 0x00000006 -> 0x00000007 [ 0.000000] 0: 0x00000010 -> 0x00000093 [ 0.000000] 0: 0x00000100 -> 0x0007ff77 [ 0.000000] On node 0 totalpages: 524029 [ 0.000000] free_area_init_node: node 0, pgdat c06cb780, node_mem_map c1000000 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 3942 pages, LIFO batch:0 [ 0.000000] Normal zone: 1736 pages used for memmap [ 0.000000] Normal zone: 220470 pages, LIFO batch:31 [ 0.000000] HighMem zone: 2327 pages used for memmap [ 0.000000] HighMem zone: 295522 pages, LIFO batch:31 [ 0.000000] Movable zone: 0 pages used for memmap [ 0.000000] ACPI: PM-Timer IO Port: 0x808 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x01] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] disabled) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] SMP: Allowing 4 CPUs, 2 hotplug CPUs [ 0.000000] PM: Registered nosave memory: 0000000000002000 - 0000000000006000 [ 0.000000] PM: Registered nosave memory: 0000000000007000 - 0000000000010000 [ 0.000000] PM: Registered nosave memory: 0000000000093000 - 00000000000f0000 [ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000 [ 0.000000] Allocating PCI resources starting at 88000000 (gap: 80000000:7ec00000) [ 0.000000] PERCPU: Allocating 45056 bytes of per cpu data [ 0.000000] NR_CPUS: 64, nr_cpu_ids: 4, nr_node_ids 1 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 519934 [ 0.000000] Kernel command line: root=UUID=a3bbb493-3187-418a-af85-837f6f3a7b95 ro quiet splash [ 0.000000] Enabling fast FPU save and restore... done. [ 0.000000] Enabling unmasked SIMD FPU exception support... done. [ 0.000000] Initializing CPU#0 [ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes) [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 2392.603 MHz processor. [ 0.004000] Console: colour VGA+ 80x25 [ 0.004000] console [tty0] enabled [ 0.004000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.004000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.004000] allocated 10483020 bytes of page_cgroup [ 0.004000] please try cgroup_disable=memory option if you don't want [ 0.004000] Scanning for low memory corruption every 60 seconds [ 0.004000] Memory: 2052592k/2096604k available (4116k kernel code, 42760k reserved, 2199k data, 532k init, 1191396k highmem) [ 0.004000] virtual kernel memory layout: [ 0.004000] fixmap : 0xffc77000 - 0xfffff000 (3616 kB) [ 0.004000] pkmap : 0xff400000 - 0xff800000 (4096 kB) [ 0.004000] vmalloc : 0xf7bfe000 - 0xff3fe000 ( 120 MB) [ 0.004000] lowmem : 0xc0000000 - 0xf73fe000 ( 883 MB) [ 0.004000] .init : 0xc0733000 - 0xc07b8000 ( 532 kB) [ 0.004000] .data : 0xc050520d - 0xc072ae60 (2199 kB) [ 0.004000] .text : 0xc0100000 - 0xc050520d (4116 kB) [ 0.004000] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.004000] SLUB: Genslabs=12, HWalign=128, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.004018] Calibrating delay loop (skipped), value calculated using timer frequency.. 4785.20 BogoMIPS (lpj=9570412) [ 0.004045] Security Framework initialized [ 0.004061] SELinux: Disabled at boot. [ 0.004093] AppArmor: AppArmor initialized [ 0.004113] Mount-cache hash table entries: 512 [ 0.004363] Initializing cgroup subsys ns [ 0.004370] Initializing cgroup subsys cpuacct [ 0.004375] Initializing cgroup subsys memory [ 0.004382] Initializing cgroup subsys freezer [ 0.004406] CPU: Trace cache: 12K uops, L1 D cache: 8K [ 0.004410] CPU: L2 cache: 512K [ 0.004415] CPU: Physical Processor ID: 0 [ 0.004419] CPU: Processor Core ID: 0 [ 0.004445] Checking 'hlt' instruction... OK. [ 0.024016] ACPI: Core revision 20080926 [ 0.037651] ACPI: Checking initramfs for custom DSDT [ 0.450847] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.490540] CPU0: Intel(R) XEON(TM) CPU 2.40GHz stepping 04 [ 0.492001] Booting processor 1 APIC 0x2 ip 0x6000 [ 0.004000] Initializing CPU#1 [ 0.004000] Calibrating delay using timer specific routine.. 4785.73 BogoMIPS (lpj=9571474) [ 0.004000] CPU: Trace cache: 12K uops, L1 D cache: 8K [ 0.004000] CPU: L2 cache: 512K [ 0.004000] CPU: Physical Processor ID: 3 [ 0.004000] CPU: Processor Core ID: 0 [ 0.580306] CPU1: Intel(R) XEON(TM) CPU 2.40GHz stepping 04 [ 0.580328] checking TSC synchronization [CPU#0 -> CPU#1]: passed. [ 0.584066] Brought up 2 CPUs [ 0.584072] Total of 2 processors activated (9570.94 BogoMIPS). [ 0.584140] CPU0 attaching sched-domain: [ 0.584145] domain 0: span 0-1 level CPU [ 0.584149] groups: 0 1 [ 0.584161] CPU1 attaching sched-domain: [ 0.584164] domain 0: span 0-1 level CPU [ 0.584168] groups: 1 0 [ 0.584430] net_namespace: 776 bytes [ 0.584452] Booting paravirtualized kernel on bare hardware [ 0.584749] Time: 7:45:36 Date: 11/09/09 [ 0.584749] regulator: core version 0.5 [ 0.584749] NET: Registered protocol family 16 [ 0.584749] EISA bus registered [ 0.584749] ACPI: bus type pci registered [ 0.612671] PCI: PCI BIOS revision 2.10 entry at 0xfbe4e, last bus=5 [ 0.612675] PCI: Using configuration type 1 for base access [ 0.614191] ACPI: EC: Look up EC in DSDT [ 0.642203] ACPI: Interpreter enabled [ 0.642213] ACPI: (supports S0 S1 S3 S4 S5) [ 0.642247] ACPI: Using IOAPIC for interrupt routing [ 0.670503] ACPI: No dock devices found. [ 0.670520] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 0.670585] pci 0000:00:00.0: reg 10 32bit mmio: [0xe8000000-0xefffffff] [ 0.670805] pci 0000:00:1f.0: quirk: region 0800-087f claimed by ICH4 ACPI/GPIO/TCO [ 0.670811] pci 0000:00:1f.0: quirk: region 0880-08bf claimed by ICH4 GPIO [ 0.670861] pci 0000:00:1f.1: reg 20 io port: [0xffa0-0xffaf] [ 0.670934] pci 0000:00:1f.2: reg 20 io port: [0xff80-0xff9f] [ 0.671000] pci 0000:00:1f.3: reg 20 io port: [0xccd0-0xccdf] [ 0.671067] pci 0000:00:1f.4: reg 20 io port: [0xff60-0xff7f] [ 0.671134] pci 0000:01:00.0: reg 10 32bit mmio: [0xfc000000-0xfcffffff] [ 0.671143] pci 0000:01:00.0: reg 14 32bit mmio: [0xf0000000-0xf7ffffff] [ 0.671170] pci 0000:01:00.0: reg 30 32bit mmio: [0xc1000000-0xc101ffff] [ 0.671231] pci 0000:00:01.0: bridge 32bit mmio: [0xfc000000-0xfdffffff] [ 0.671237] pci 0000:00:01.0: bridge 32bit mmio pref: [0xf0000000-0xf7ffffff] [ 0.671326] pci 0000:00:02.0: bridge 32bit mmio: [0xfe500000-0xfe7fffff] [ 0.671356] pci 0000:03:00.0: reg 10 32bit mmio: [0xfe6ff000-0xfe6fffff] [ 0.671464] pci 0000:02:1f.0: bridge 32bit mmio: [0xfe600000-0xfe7fffff] [ 0.671604] pci 0000:04:0e.0: reg 10 32bit mmio: [0xfe1e0000-0xfe1fffff] [ 0.671614] pci 0000:04:0e.0: reg 14 32bit mmio: [0xfe1c0000-0xfe1dffff] [ 0.671624] pci 0000:04:0e.0: reg 18 io port: [0xdcc0-0xdcff] [ 0.671650] pci 0000:04:0e.0: reg 30 32bit mmio: [0xfe200000-0xfe21ffff] [ 0.671665] pci 0000:04:0e.0: PME# supported from D0 D3hot D3cold [ 0.672006] pci 0000:04:0e.0: PME# disabled [ 0.672044] pci 0000:00:1e.0: transparent bridge [ 0.672051] pci 0000:00:1e.0: bridge io port: [0xd000-0xefff] [ 0.672057] pci 0000:00:1e.0: bridge 32bit mmio: [0xfe100000-0xfe4fffff] [ 0.672100] pci 0000:05:04.0: reg 10 io port: [0xec80-0xecff] [ 0.672111] pci 0000:05:04.0: reg 14 32bit mmio: [0xfe3ffc00-0xfe3fffff] [ 0.672149] pci 0000:05:04.0: reg 30 32bit mmio: [0xfe400000-0xfe43ffff] [ 0.672183] pci 0000:05:05.0: reg 10 io port: [0xec00-0xec7f] [ 0.672193] pci 0000:05:05.0: reg 14 32bit mmio: [0xfe3ff800-0xfe3ffbff] [ 0.672231] pci 0000:05:05.0: reg 30 32bit mmio: [0xfe400000-0xfe43ffff] [ 0.672265] pci 0000:05:06.0: reg 10 io port: [0xe880-0xe8ff] [ 0.672275] pci 0000:05:06.0: reg 14 32bit mmio: [0xfe3ff400-0xfe3ff7ff] [ 0.672314] pci 0000:05:06.0: reg 30 32bit mmio: [0xfe400000-0xfe43ffff] [ 0.672351] pci 0000:05:07.0: reg 10 io port: [0xe800-0xe87f] [ 0.672361] pci 0000:05:07.0: reg 14 32bit mmio: [0xfe3ff000-0xfe3ff3ff] [ 0.672400] pci 0000:05:07.0: reg 30 32bit mmio: [0xfe400000-0xfe43ffff] [ 0.672460] pci 0000:04:0d.0: bridge io port: [0xe000-0xefff] [ 0.672466] pci 0000:04:0d.0: bridge 32bit mmio: [0xfe300000-0xfe4fffff] [ 0.672499] bus 00 -> node 0 [ 0.672509] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.673090] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT] [ 0.673673] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI2._PRT] [ 0.673993] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI2.PCI3._PRT] [ 0.696710] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 15) [ 0.697077] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 *10 11 12 15) [ 0.697443] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11 12 15) [ 0.697806] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11 12 15) [ 0.698170] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 15) *0, disabled. [ 0.698533] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11 12 15) *0, disabled. [ 0.698897] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 11 12 15) *0, disabled. [ 0.699264] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *9 10 11 12 15) [ 0.699509] ACPI: WMI: Mapper loaded [ 0.699622] SCSI subsystem initialized [ 0.699622] libata version 3.00 loaded. [ 0.700066] usbcore: registered new interface driver usbfs [ 0.700096] usbcore: registered new interface driver hub [ 0.700121] usbcore: registered new device driver usb [ 0.700121] PCI: Using ACPI for IRQ routing [ 0.708017] Bluetooth: Core ver 2.13 [ 0.708043] NET: Registered protocol family 31 [ 0.708043] Bluetooth: HCI device and connection manager initialized [ 0.708043] Bluetooth: HCI socket layer initialized [ 0.708043] NET: Registered protocol family 8 [ 0.708044] NET: Registered protocol family 20 [ 0.708064] NetLabel: Initializing [ 0.708067] NetLabel: domain hash size = 128 [ 0.708070] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.708093] NetLabel: unlabeled traffic allowed by default [ 0.708234] AppArmor: AppArmor Filesystem Enabled [ 0.712020] pnp: PnP ACPI init [ 0.712040] ACPI: bus type pnp registered [ 0.739672] pnp 00:0b: io resource (0x800-0x85f) overlaps 0000:00:1f.0 BAR 7 (0x800-0x87f), disabling [ 0.739677] pnp 00:0b: io resource (0x860-0x8ff) overlaps 0000:00:1f.0 BAR 7 (0x800-0x87f), disabling [ 0.740547] pnp: PnP ACPI: found 12 devices [ 0.740551] ACPI: ACPI bus type pnp unregistered [ 0.740558] PnPBIOS: Disabled by ACPI PNP [ 0.740575] system 00:00: iomem range 0x0-0x9ffff could not be reserved [ 0.740580] system 00:00: iomem range 0x100000-0xffffff could not be reserved [ 0.740584] system 00:00: iomem range 0x1000000-0x7ff76fff could not be reserved [ 0.740589] system 00:00: iomem range 0xf0000-0xfffff could not be reserved [ 0.740593] system 00:00: iomem range 0xfec00000-0xfec0ffff has been reserved [ 0.740597] system 00:00: iomem range 0xfee00000-0xfee0ffff has been reserved [ 0.740602] system 00:00: iomem range 0xffb00000-0xffbfffff has been reserved [ 0.740606] system 00:00: iomem range 0xffc00000-0xffffffff has been reserved [ 0.740623] system 00:0b: ioport range 0xc00-0xc7f has been reserved [ 0.775462] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01 [ 0.775466] pci 0000:00:01.0: IO window: disabled [ 0.775473] pci 0000:00:01.0: MEM window: 0xfc000000-0xfdffffff [ 0.775479] pci 0000:00:01.0: PREFETCH window: 0x000000f0000000-0x000000f7ffffff [ 0.775489] pci 0000:02:1f.0: PCI bridge, secondary bus 0000:03 [ 0.775492] pci 0000:02:1f.0: IO window: disabled [ 0.775499] pci 0000:02:1f.0: MEM window: 0xfe600000-0xfe7fffff [ 0.775505] pci 0000:02:1f.0: PREFETCH window: disabled [ 0.775514] pci 0000:00:02.0: PCI bridge, secondary bus 0000:02 [ 0.775517] pci 0000:00:02.0: IO window: disabled [ 0.775523] pci 0000:00:02.0: MEM window: 0xfe500000-0xfe7fffff [ 0.775528] pci 0000:00:02.0: PREFETCH window: disabled [ 0.775538] pci 0000:04:0d.0: PCI bridge, secondary bus 0000:05 [ 0.775543] pci 0000:04:0d.0: IO window: 0xe000-0xefff [ 0.775551] pci 0000:04:0d.0: MEM window: 0xfe300000-0xfe4fffff [ 0.775557] pci 0000:04:0d.0: PREFETCH window: 0x00000088000000-0x000000880fffff [ 0.775567] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:04 [ 0.775572] pci 0000:00:1e.0: IO window: 0xd000-0xefff [ 0.775580] pci 0000:00:1e.0: MEM window: 0xfe100000-0xfe4fffff [ 0.775587] pci 0000:00:1e.0: PREFETCH window: 0x00000088000000-0x000000881fffff [ 0.775613] pci 0000:02:1f.0: setting latency timer to 64 [ 0.775623] pci 0000:00:1e.0: setting latency timer to 64 [ 0.775638] bus: 00 index 0 io port: [0x00-0xffff] [ 0.775642] bus: 00 index 1 mmio: [0x000000-0xffffffff] [ 0.775645] bus: 01 index 0 mmio: [0x0-0x0] [ 0.775648] bus: 01 index 1 mmio: [0xfc000000-0xfdffffff] [ 0.775652] bus: 01 index 2 mmio: [0xf0000000-0xf7ffffff] [ 0.775655] bus: 01 index 3 mmio: [0x0-0x0] [ 0.775658] bus: 02 index 0 mmio: [0x0-0x0] [ 0.775661] bus: 02 index 1 mmio: [0xfe500000-0xfe7fffff] [ 0.775664] bus: 02 index 2 mmio: [0x0-0x0] [ 0.775667] bus: 02 index 3 mmio: [0x0-0x0] [ 0.775670] bus: 03 index 0 mmio: [0x0-0x0] [ 0.775674] bus: 03 index 1 mmio: [0xfe600000-0xfe7fffff] [ 0.775677] bus: 03 index 2 mmio: [0x0-0x0] [ 0.775679] bus: 03 index 3 mmio: [0x0-0x0] [ 0.775683] bus: 04 index 0 io port: [0xd000-0xefff] [ 0.775686] bus: 04 index 1 mmio: [0xfe100000-0xfe4fffff] [ 0.775690] bus: 04 index 2 mmio: [0x88000000-0x881fffff] [ 0.775693] bus: 04 index 3 io port: [0x00-0xffff] [ 0.775696] bus: 04 index 4 mmio: [0x000000-0xffffffff] [ 0.775700] bus: 05 index 0 io port: [0xe000-0xefff] [ 0.775703] bus: 05 index 1 mmio: [0xfe300000-0xfe4fffff] [ 0.775706] bus: 05 index 2 mmio: [0x88000000-0x880fffff] [ 0.775710] bus: 05 index 3 mmio: [0x0-0x0] [ 0.775724] NET: Registered protocol family 2 [ 0.788110] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.788634] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.789835] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 0.790596] TCP: Hash tables configured (established 131072 bind 65536) [ 0.790602] TCP reno registered [ 0.796209] NET: Registered protocol family 1 [ 0.796437] checking if image is initramfs... it is [ 1.272468] Switched to high resolution mode on CPU 1 [ 1.276064] Switched to high resolution mode on CPU 0 [ 1.621147] Freeing initrd memory: 7423k freed [ 1.621204] Simple Boot Flag at 0x7a set to 0x1 [ 1.621247] cpufreq: No nForce2 chipset. [ 1.621469] audit: initializing netlink socket (disabled) [ 1.621495] type=2000 audit(1257752736.620:1): initialized [ 1.630725] highmem bounce pool size: 64 pages [ 1.630735] HugeTLB registered 4 MB page size, pre-allocated 0 pages [ 1.633017] VFS: Disk quotas dquot_6.5.1 [ 1.633131] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 1.634155] fuse init (API version 7.10) [ 1.634288] msgmni has been set to 1698 [ 1.634620] alg: No test for stdrng (krng) [ 1.634659] io scheduler noop registered [ 1.634662] io scheduler anticipatory registered [ 1.634666] io scheduler deadline registered [ 1.634693] io scheduler cfq registered (default) [ 1.634774] pci 0000:01:00.0: Boot video device [ 1.658014] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 1.658030] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 1.658238] input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0 [ 1.658243] ACPI: Power Button (FF) [PWRF] [ 1.658314] input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1 [ 1.658324] ACPI: Power Button (CM) [VBTN] [ 1.658769] processor ACPI_CPU:00: registered as cooling_device0 [ 1.658832] processor ACPI_CPU:01: registered as cooling_device1 [ 1.673159] isapnp: Scanning for PnP cards... [ 2.027010] isapnp: No Plug & Play device found [ 2.040230] Serial: 8250/16550 driver4 ports, IRQ sharing enabled [ 2.040335] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 2.040436] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A [ 2.040852] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 2.041024] 00:09: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A [ 2.042307] brd: module loaded [ 2.042879] loop: module loaded [ 2.043020] Fixed MDIO Bus: probed [ 2.043030] PPP generic driver version 2.4.2 [ 2.043127] input: Macintosh mouse button emulation as /devices/virtual/input/input2 [ 2.043187] Driver 'sd' needs updating - please use bus_type methods [ 2.043203] Driver 'sr' needs updating - please use bus_type methods [ 2.043324] ata_piix 0000:00:1f.1: version 2.12 [ 2.043411] ata_piix 0000:00:1f.1: setting latency timer to 64 [ 2.043589] scsi0 : ata_piix [ 2.043781] scsi1 : ata_piix [ 2.043838] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14 [ 2.043842] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15 [ 2.204461] ata1.00: ATA-6: WDC WD800BB-00JHC0, 05.01C05, max UDMA/100 [ 2.204466] ata1.00: 156301488 sectors, multi 8: LBA [ 2.212404] ata1.00: configured for UDMA/100 [ 2.392408] ata2.00: ATAPI: _NEC CD-RW NR-7800A, 1.07, max UDMA/33 [ 2.408360] ata2.00: configured for UDMA/33 [ 2.408745] scsi 0:0:0:0: Direct-Access ATA WDC WD800BB-00JH 05.0 PQ: 0 ANSI: 5 [ 2.408920] sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors: (80.0 GB/74.5 GiB) [ 2.408947] sd 0:0:0:0: [sda] Write Protect is off [ 2.408951] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 2.408995] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.409107] sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors: (80.0 GB/74.5 GiB) [ 2.409131] sd 0:0:0:0: [sda] Write Protect is off [ 2.409134] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 2.409177] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.409183] sda: sda1 sda2 < sda5 > [ 2.445401] sd 0:0:0:0: [sda] Attached SCSI disk [ 2.445491] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 2.448264] scsi 1:0:0:0: CD-ROM _NEC NR-7800A 1.07 PQ: 0 ANSI: 5 [ 2.451542] sr0: scsi3-mmc drive: 40x/40x writer cd/rw xa/form2 cdda tray [ 2.451547] Uniform CD-ROM driver Revision: 3.20 [ 2.451718] sr 1:0:0:0: Attached scsi CD-ROM sr0 [ 2.451795] sr 1:0:0:0: Attached scsi generic sg1 type 5 [ 2.452945] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 2.452978] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 2.453004] uhci_hcd: USB Universal Host Controller Interface driver [ 2.453069] uhci_hcd 0000:00:1f.2: PCI INT D -> GSI 19 (level, low) -> IRQ 19 [ 2.453082] uhci_hcd 0000:00:1f.2: setting latency timer to 64 [ 2.453087] uhci_hcd 0000:00:1f.2: UHCI Host Controller [ 2.453179] uhci_hcd 0000:00:1f.2: new USB bus registered, assigned bus number 1 [ 2.453221] uhci_hcd 0000:00:1f.2: irq 19, io base 0x0000ff80 [ 2.453354] usb usb1: configuration #1 chosen from 1 choice [ 2.453404] hub 1-0:1.0: USB hub found [ 2.453416] hub 1-0:1.0: 2 ports detected [ 2.453574] uhci_hcd 0000:00:1f.4: PCI INT C -> GSI 23 (level, low) -> IRQ 23 [ 2.453588] uhci_hcd 0000:00:1f.4: setting latency timer to 64 [ 2.453593] uhci_hcd 0000:00:1f.4: UHCI Host Controller [ 2.453661] uhci_hcd 0000:00:1f.4: new USB bus registered, assigned bus number 2 [ 2.453695] uhci_hcd 0000:00:1f.4: irq 23, io base 0x0000ff60 [ 2.453821] usb usb2: configuration #1 chosen from 1 choice [ 2.453863] hub 2-0:1.0: USB hub found [ 2.453877] hub 2-0:1.0: 2 ports detected [ 2.454089] PNP: PS/2 Controller [PNP0f13:MOU] at 0x60,0x64 irq 12 [ 2.454093] PNP: PS/2 controller doesn't have KBD irq; using default 1 [ 2.455999] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 2.456026] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 2.460070] mice: PS/2 mouse device common for all mice [ 2.472125] rtc_cmos 00:05: RTC can wake from S4 [ 2.472189] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0 [ 2.472217] rtc0: alarms up to one day, 242 bytes nvram [ 2.472333] device-mapper: uevent: version 1.0.3 [ 2.472515] device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@redhat.com [ 2.472672] device-mapper: multipath: version 1.0.5 loaded [ 2.472677] device-mapper: multipath round-robin: version 1.0.0 loaded [ 2.472833] EISA: Probing bus 0 at eisa.0 [ 2.472887] EISA: Detected 0 cards. [ 2.472993] cpuidle: using governor ladder [ 2.472998] cpuidle: using governor menu [ 2.473948] TCP cubic registered [ 2.474062] NET: Registered protocol family 10 [ 2.474829] lo: Disabled Privacy Extensions [ 2.475432] NET: Registered protocol family 17 [ 2.475470] Bluetooth: L2CAP ver 2.11 [ 2.475473] Bluetooth: L2CAP socket layer initialized [ 2.475478] Bluetooth: SCO (Voice Link) ver 0.6 [ 2.475480] Bluetooth: SCO socket layer initialized [ 2.475561] Bluetooth: RFCOMM socket layer initialized [ 2.475578] Bluetooth: RFCOMM TTY layer initialized [ 2.475581] Bluetooth: RFCOMM ver 1.10 [ 2.475684] Using IPI No-Shortcut mode [ 2.475846] registered taskstats version 1 [ 2.476061] Magic number: 1:682:773 [ 2.476070] hub 2-0:1.0: hash matches [ 2.476176] rtc_cmos 00:05: setting system clock to 2009-11-09 07:45:38 UTC (1257752738) [ 2.476181] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 2.476184] EDD information not available. [ 2.476972] Freeing unused kernel memory: 532k freed [ 2.477235] Write protecting the kernel text: 4120k [ 2.477331] Write protecting the kernel read-only data: 1524k [ 2.789243] usb 1-1: new full speed USB device using uhci_hcd and address 2 [ 2.824009] Floppy drive(s): fd0 is 1.44M [ 2.838493] FDC 0 is a National Semiconductor PC87306 [ 2.882197] Intel(R) PRO/1000 Network Driver - version 7.3.21-k3-NAPI [ 2.882203] Copyright (c) 1999-2006 Intel Corporation. [ 2.882284] e1000 0000:04:0e.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 2.889508] Linux Tulip driver version 1.1.15 (Feb 27, 2007) [ 2.889621] tulip 0000:05:04.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 2.900252] tulip0: EEPROM default media type Autosense. [ 2.900257] tulip0: Index #0 - Media MII (#11) described by a 21142 MII PHY (3) block. [ 2.907281] tulip0: MII transceiver #1 config 3100 status 7869 advertising 01e1. [ 2.936444] eth0: Digital DS21142/43 Tulip rev 65 at Port 0xec80, 00:80:c8:b9:39:99, IRQ 17. [ 2.936506] tulip 0000:05:05.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 2.946512] tulip1: EEPROM default media type Autosense. [ 2.946517] tulip1: Index #0 - Media MII (#11) described by a 21142 MII PHY (3) block. [ 2.953215] tulip1: MII transceiver #1 config 3100 status 7849 advertising 01e1. [ 2.982333] usb 1-1: configuration #1 chosen from 1 choice [ 2.985276] hub 1-1:1.0: USB hub found [ 2.987205] hub 1-1:1.0: 4 ports detected [ 2.993399] eth1: Digital DS21142/43 Tulip rev 65 at Port 0xec00, 00:80:c8:b9:39:9a, IRQ 18. [ 2.993622] tulip 0000:05:06.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19 [ 3.004511] tulip2: EEPROM default media type Autosense. [ 3.004516] tulip2: Index #0 - Media MII (#11) described by a 21142 MII PHY (3) block. [ 3.011388] tulip2: MII transceiver #1 config 3100 status 7849 advertising 01e1. [ 3.041230] eth2: Digital DS21142/43 Tulip rev 65 at Port 0xe880, 00:80:c8:b9:39:9b, IRQ 19. [ 3.041283] tulip 0000:05:07.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 3.051261] tulip3: EEPROM default media type Autosense. [ 3.051266] tulip3: Index #0 - Media MII (#11) described by a 21142 MII PHY (3) block. [ 3.057952] tulip3: MII transceiver #1 config 3100 status 7849 advertising 01e1. [ 3.085302] eth3: Digital DS21142/43 Tulip rev 65 at Port 0xe800, 00:80:c8:b9:39:9c, IRQ 16. [ 3.149230] e1000: 0000:04:0e.0: e1000_probe: (PCI:33MHz:32-bit) 00:0e:0c:bc:07:b9 [ 3.307789] usb 1-1.1: new full speed USB device using uhci_hcd and address 3 [ 3.324074] e1000: eth4: e1000_probe: Intel(R) PRO/1000 Network Connection [ 3.471336] usb 1-1.1: configuration #1 chosen from 1 choice [ 3.504113] hub 1-1.1:1.0: USB hub found [ 3.512016] hub 1-1.1:1.0: 3 ports detected [ 3.617171] usb 1-1.2: new full speed USB device using uhci_hcd and address 4 [ 3.759345] PM: Starting manual resume from disk [ 3.759353] PM: Resume from partition 8:5 [ 3.759355] PM: Checking hibernation image. [ 3.759579] PM: Resume from disk failed. [ 3.781262] usb 1-1.2: configuration #1 chosen from 1 choice [ 3.809322] kjournald starting. Commit interval 5 seconds [ 3.809348] EXT3-fs: mounted filesystem with ordered data mode. [ 3.865125] usb 1-1.1.1: new full speed USB device using uhci_hcd and address 5 [ 4.006229] usb 1-1.1.1: configuration #1 chosen from 1 choice [ 8.977986] udev: starting version 147 [ 9.434000] lp: driver loaded but no devices found [ 10.320092] 802.1Q VLAN Support v1.8 Ben Greear [ 10.320097] All bugs added by David S. Miller [ 10.388148] parport_pc 00:0a: reported by Plug and Play ACPI [ 10.388274] parport0: PC-style at 0x378 (0x778), irq 7, using FIFO [PCSPP,TRISTATE,COMPAT,EPP,ECP] [ 10.438665] Linux agpgart interface v0.103 [ 10.484455] lp0: using parport0 (interrupt-driven). [ 10.594978] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 10.818511] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2) [ 10.874576] Intel 82802 RNG detected [ 10.884672] ppdev: user-space parallel port driver [ 10.921617] usbcore: registered new interface driver usbserial [ 10.921705] USB Serial support registered for generic [ 10.921808] usbcore: registered new interface driver usbserial_generic [ 10.921812] usbserial: USB Serial Driver core [ 10.946157] agpgart-intel 0000:00:00.0: Intel i860 Chipset [ 10.956102] agpgart-intel 0000:00:00.0: AGP aperture is 128M @ 0xe8000000 [ 10.964472] usbcore: registered new interface driver hiddev [ 10.967951] input: Dell Dell USB Keyboard Hub as /devices/pci0000:00/0000:00:1f.2/usb1/1-1/1-1.1/1-1.1.1/1-1.1.1:1.0/input/input3 [ 10.976780] generic-usb 0003:413C:2002.0001: input,hidraw0: USB HID v1.10 Keyboard [Dell Dell USB Keyboard Hub] on usb-0000:00:1f.2-1.1.1/input0 [ 10.983864] input: Dell Dell USB Keyboard Hub as /devices/pci0000:00/0000:00:1f.2/usb1/1-1/1-1.1/1-1.1.1/1-1.1.1:1.1/input/input4 [ 10.989484] generic-usb 0003:413C:2002.0002: input,hidraw1: USB HID v1.10 Device [Dell Dell USB Keyboard Hub] on usb-0000:00:1f.2-1.1.1/input1 [ 10.989524] usbcore: registered new interface driver usbhid [ 10.989531] usbhid: v2.6:USB HID core driver [ 11.102393] synaptics was reset on resume, see synaptics_resume_reset if you have trouble on resume [ 11.151843] USB Serial support registered for FTDI USB Serial Device [ 11.151915] ftdi_sio 1-1.2:1.0: FTDI USB Serial Device converter detected [ 11.151977] usb 1-1.2: Detected FT8U232AM [ 11.152125] usb 1-1.2: FTDI USB Serial Device converter now attached to ttyUSB0 [ 11.152177] usbcore: registered new interface driver ftdi_sio [ 11.152181] ftdi_sio: v1.4.3:USB FTDI Serial Converters Driver [ 11.249606] EDAC MC: Ver: 2.1.0 Oct 20 2009 [ 11.281008] EDAC i82860: i82860 init one [ 11.281229] EDAC MC0: Giving out device to 'i82860_edac' 'i82860': DEV 0000:00:00.0 [ 11.281267] EDAC PCI0: Giving out device to module 'i82860_edac' controller 'EDAC PCI controller': DEV '0000:00:00.0' (POLLED) [ 11.592762] psmouse serio1: ID: 00 00 64<6>input: PS2++ Logitech Wheel Mouse as /devices/platform/i8042/serio1/input/input5 [ 12.006383] ip_tables: (C) 2000-2006 Netfilter Core Team [ 14.310284] Adding 3229024k swap on /dev/sda5. Priority:-1 extents:1 across:3229024k [ 14.530048] EXT3 FS on sda1, internal journal [ 15.427183] ADDRCONF(NETDEV_UP): eth4: link is not ready [ 19.183942] ADDRCONF(NETDEV_UP): eth4.10: link is not ready [ 23.604034] type=1505 audit(1257752759.627:2): operation="profile_load" name="/usr/share/gdm/guest-session/Xsession" name2="default" pid=1235 [ 23.904332] type=1505 audit(1257752759.924:3): operation="profile_load" name="/sbin/dhclient3" name2="default" pid=1277 [ 23.905308] type=1505 audit(1257752759.928:4): operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" name2="default" pid=1277 [ 23.905453] type=1505 audit(1257752759.928:5): operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" name2="default" pid=1277 [ 25.004767] eth0: Setting full-duplex based on MII#1 link partner capability of c1e1. [ 32.612015] eth1: no IPv6 routers present [ 32.816511] eth3: no IPv6 routers present [ 32.940012] eth0: no IPv6 routers present [ 33.204513] eth2: no IPv6 routers present [ 35.896984] type=1505 audit(1257752771.920:6): operation="profile_load" name="/usr/bin/evince" name2="default" pid=1290 [ 35.902410] type=1505 audit(1257752771.924:7): operation="profile_load" name="/usr/bin/evince-previewer" name2="default" pid=1290 [ 35.905460] type=1505 audit(1257752771.928:8): operation="profile_load" name="/usr/bin/evince-thumbnailer" name2="default" pid=1290 [ 36.136112] type=1505 audit(1257752772.159:9): operation="profile_load" name="/usr/bin/freshclam" name2="default" pid=1429 [ 36.708428] type=1505 audit(1257752772.731:10): operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" name2="default" pid=1433 [ 36.709029] type=1505 audit(1257752772.731:11): operation="profile_load" name="/usr/sbin/cupsd" name2="default" pid=1433 [ 36.885033] type=1505 audit(1257752772.908:12): operation="profile_load" name="/usr/sbin/mysqld" name2="default" pid=1437 [ 37.052299] type=1505 audit(1257752773.072:13): operation="profile_load" name="/usr/sbin/ntpd" name2="default" pid=1438 [ 37.211192] type=1505 audit(1257752773.232:14): operation="profile_load" name="/usr/sbin/tcpdump" name2="default" pid=1439 [ 38.758982] CPU0 attaching NULL sched-domain. [ 38.758992] CPU1 attaching NULL sched-domain. [ 38.760875] CPU0 attaching sched-domain: [ 38.760881] domain 0: span 0-1 level CPU [ 38.760886] groups: 0 1 [ 38.760898] CPU1 attaching sched-domain: [ 38.760901] domain 0: span 0-1 level CPU [ 38.760905] groups: 1 0 [ 38.761404] CPU0 attaching NULL sched-domain. [ 38.761410] CPU1 attaching NULL sched-domain. [ 38.764598] CPU0 attaching sched-domain: [ 38.764604] domain 0: span 0-1 level CPU [ 38.764608] groups: 0 1 [ 38.764618] CPU1 attaching sched-domain: [ 38.764621] domain 0: span 0-1 level CPU [ 38.764625] groups: 1 0 [ 51.506205] vboxdrv: Trying to deactivate the NMI watchdog permanently... [ 51.506212] vboxdrv: Successfully done. [ 51.506216] vboxdrv: Found 2 processor cores. [ 51.506380] vboxdrv: fAsync=0 offMin=0x788 offMax=0x3438 [ 51.506491] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'. [ 51.506495] vboxdrv: Successfully loaded version 3.0.4 (interface 0x000e0000). [ 55.945211] type=1503 audit(1257752792.525:15): operation="inode_permission" requested_mask="r::" denied_mask="r::" fsuid=0 name="/sys/devices/system/cpu/" pid=2322 profile="/usr/sbin/mysqld" [ 58.179272] type=1503 audit(1257752794.756:16): operation="inode_permission" requested_mask="r::" denied_mask="r::" fsuid=0 name="/sys/devices/system/cpu/" pid=2362 profile="/usr/sbin/mysqld" [ 58.733366] type=1503 audit(1257752795.312:17): operation="inode_permission" requested_mask="r::" denied_mask="r::" fsuid=0 name="/sys/devices/system/cpu/" pid=2483 profile="/usr/sbin/mysqld" [ 59.226374] type=1503 audit(1257752795.804:18): operation="inode_permission" requested_mask="r::" denied_mask="r::" fsuid=0 name="/sys/devices/system/cpu/" pid=2489 profile="/usr/sbin/mysqld" [ 60.870332] type=1503 audit(1257752797.448:19): operation="inode_permission" requested_mask="r::" denied_mask="r::" fsuid=0 name="/sys/devices/system/cpu/" pid=2510 profile="/usr/sbin/mysqld" [ 60.961784] type=1503 audit(1257752797.540:20): operation="inode_permission" requested_mask="r::" denied_mask="r::" fsuid=0 name="/sys/devices/system/cpu/" pid=2521 profile="/usr/sbin/mysqld"