Error: command ['sh', '-c', 'dmesg | comm -13 /var/log/dmesg -'] failed with exit code 1: [   18.687271] [drm] DAC-6: set mode 640x480 0
[   19.161260] i2c-adapter i2c-1: unable to read EDID block.
[   19.161270] i915 0000:00:02.0: LVDS-1: no EDID data
[   19.239971] [drm] DAC-6: set mode 640x480 0
[   19.730368] [drm] DAC-6: set mode 640x480 0
[   19.816155] e100: eth0 NIC Link is Up 100 Mbps Full Duplex
[   20.150482] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[   20.189669] i2c-adapter i2c-1: unable to read EDID block.
[   20.189676] i915 0000:00:02.0: LVDS-1: no EDID data
[   51.816600] ata1: drained 141 bytes to clear DRQ.
[   51.816614] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[   51.816630] ata1.00: cmd c8/00:28:bb:9b:00/00:00:00:00:00/ee tag 0 dma 20480 in
[   51.816632]          res 40/00:fe:00:00:00/00:00:00:00:00/40 Emask 0x4 (timeout)
[   51.816636] ata1.00: status: { DRDY }
[   51.872057] ata1: soft resetting link
[   52.054089] ata1.00: configured for UDMA/100
[   52.054097] ata1.00: device reported invalid CHS sector 0
[   52.054108] ata1: EH complete
[   83.816345] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[   83.816361] ata1.00: cmd c8/00:90:23:9c:a8/00:00:00:00:00/ed tag 0 dma 73728 in
[   83.816363]          res 40/00:fe:00:00:00/00:00:00:00:00/40 Emask 0x4 (timeout)
[   83.816368] ata1.00: status: { DRDY }
[   88.860057] ata1: link is slow to respond, please be patient (ready=0)
[   93.848058] ata1: device not ready (errno=-16), forcing hardreset
[   93.848070] ata1: soft resetting link
[   94.033293] ata1.00: configured for UDMA/100
[   94.033303] ata1.00: device reported invalid CHS sector 0
[   94.033319] ata1: EH complete
[   94.549594] [drm] DAC-6: set mode 640x480 0
[   95.040217] [drm] DAC-6: set mode 640x480 0
[   95.466021] i2c-adapter i2c-1: unable to read EDID block.
[   95.466028] i915 0000:00:02.0: LVDS-1: no EDID data
[   95.545398] [drm] DAC-6: set mode 640x480 0
[   96.035836] [drm] DAC-6: set mode 640x480 0
[   96.461229] i2c-adapter i2c-1: unable to read EDID block.
[   96.461235] i915 0000:00:02.0: LVDS-1: no EDID data
[   96.555437] [drm] DAC-6: set mode 640x480 0
[   97.045482] [drm] DAC-6: set mode 640x480 0
[   97.476420] i2c-adapter i2c-1: unable to read EDID block.
[   97.476429] i915 0000:00:02.0: LVDS-1: no EDID data
comm: file 2 is not in sorted order
[  108.783726] [drm] DAC-6: set mode 640x480 0
[  109.294565] [drm] DAC-6: set mode 640x480 0
[  109.726844] i2c-adapter i2c-1: unable to read EDID block.
[  109.726855] i915 0000:00:02.0: LVDS-1: no EDID data
[  109.820235] [drm] DAC-6: set mode 640x480 0
[  110.313184] [drm] DAC-6: set mode 640x480 0
[  110.741854] i2c-adapter i2c-1: unable to read EDID block.
[  110.741862] i915 0000:00:02.0: LVDS-1: no EDID data
[  110.823085] [drm] DAC-6: set mode 640x480 0
[  111.316132] [drm] DAC-6: set mode 640x480 0
[  111.743370] i2c-adapter i2c-1: unable to read EDID block.
[  111.743380] i915 0000:00:02.0: LVDS-1: no EDID data
[  114.104041] Clocksource tsc unstable (delta = -185502490 ns)
[  114.639615] [drm] DAC-6: set mode 640x480 0
[  115.140293] [drm] DAC-6: set mode 640x480 0
[  115.564908] i2c-adapter i2c-1: unable to read EDID block.
[  115.564915] i915 0000:00:02.0: LVDS-1: no EDID data
[  132.463438] [drm] DAC-6: set mode 640x480 0
[  132.954131] [drm] DAC-6: set mode 640x480 0
[  133.379110] i2c-adapter i2c-1: unable to read EDID block.
[  133.379117] i915 0000:00:02.0: LVDS-1: no EDID data
[  157.254509] <-- RTMPAllocTxRxRingMemory, Status=0
[  157.256551] -->RTUSBVenderReset
[  157.256654] <--RTUSBVenderReset
[  157.594048] Key1Str is Invalid key length(0) or Type(0)
[  157.594127] Key2Str is Invalid key length(0) or Type(0)
[  157.594206] Key3Str is Invalid key length(0) or Type(0)
[  157.594288] Key4Str is Invalid key length(0) or Type(0)
[  157.595686] 1. Phy Mode = 5
[  157.595692] 2. Phy Mode = 5
[  157.626682] RTMPSetPhyMode: channel is out of range, use first channel=1 
[  157.639296] 3. Phy Mode = 9
[  157.647292] MCS Set = ff 00 00 00 01
[  157.651523] <==== rt28xx_init, Status=0
[  157.653290] 0x1300 = 00064300
[  168.624056] ra0: no IPv6 routers present
[  189.346377] #
[  197.540044] #
[  412.196972] ---> RTMPFreeTxRxRingMemory
[  412.197029] <--- RTMPFreeTxRxRingMemory
[  412.726721] <-- RTMPAllocTxRxRingMemory, Status=0
[  412.728640] -->RTUSBVenderReset
[  412.728745] <--RTUSBVenderReset
[  413.013442] CfgSetCountryRegion():CountryRegion in eeprom was programmed
[  413.013471] CfgSetCountryRegion():CountryRegion in eeprom was programmed
[  413.014600] Key1Str is Invalid key length(0) or Type(0)
[  413.014676] Key2Str is Invalid key length(0) or Type(0)
[  413.014754] Key3Str is Invalid key length(0) or Type(0)
[  413.014836] Key4Str is Invalid key length(0) or Type(0)
[  413.016266] 1. Phy Mode = 5
[  413.016272] 2. Phy Mode = 5
[  413.047931] RTMPSetPhyMode: channel is out of range, use first channel=1 
[  413.060419] 3. Phy Mode = 9
[  413.068415] MCS Set = ff 00 00 00 01
[  413.072646] <==== rt28xx_init, Status=0
[  413.074289] 0x1300 = 00064300
[  423.852042] ra0: no IPv6 routers present
[  496.000349] e100: eth0 NIC Link is Down
[  507.582923] ADDRCONF(NETDEV_UP): eth0: link is not ready
[  782.000194] e100: eth0 NIC Link is Up 100 Mbps Full Duplex
[  782.000627] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[  889.836784] ---> RTMPFreeTxRxRingMemory
[  889.836843] <--- RTMPFreeTxRxRingMemory
[  891.401685] usbcore: deregistering interface driver rt2870
[  891.401736] rtusb_disconnect: unregister usbnet usb-0000:00:1d.7-2
[  891.401744] RtmpOSNetDevDetach(): RtmpOSNetDeviceDetach(), dev->name=ra0!
[  891.656153]  RTUSB disconnect successfully
[  891.656243] <--- rtusb exit
[ 1057.377064] pcmcia: Detected deprecated PCMCIA ioctl usage from process: lshw.
[ 1057.377070] pcmcia: This interface will soon be removed from the kernel; please expect breakage unless you upgrade to new tools.
[ 1057.377074] pcmcia: see http://www.kernel.org/pub/linux/utils/kernel/pcmcia/pcmcia.html for details.
[ 1178.854350] sr 1:0:0:0: [sr0] unaligned transfer
[ 1178.854472] sr 1:0:0:0: [sr0] unaligned transfer
[ 1178.951226] sr 1:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 1178.951241] sr 1:0:0:0: [sr0] Sense Key : Illegal Request [current] 
[ 1178.951253] sr 1:0:0:0: [sr0] Add. Sense: Logical block address out of range
[ 1178.951268] end_request: I/O error, dev sr0, sector 2096896
[ 1178.951283] Buffer I/O error on device sr0, logical block 2096896
[ 1178.951294] Buffer I/O error on device sr0, logical block 2096897
[ 1178.951301] Buffer I/O error on device sr0, logical block 2096898
[ 1178.951308] Buffer I/O error on device sr0, logical block 2096899
[ 1178.951314] Buffer I/O error on device sr0, logical block 2096900
[ 1178.951321] Buffer I/O error on device sr0, logical block 2096901
[ 1178.951328] Buffer I/O error on device sr0, logical block 2096902
[ 1178.951335] Buffer I/O error on device sr0, logical block 2096903
[ 1178.952510] sr 1:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 1178.952522] sr 1:0:0:0: [sr0] Sense Key : Illegal Request [current] 
[ 1178.952533] sr 1:0:0:0: [sr0] Add. Sense: Logical block address out of range
[ 1178.952546] end_request: I/O error, dev sr0, sector 2096896
[ 1178.952556] Buffer I/O error on device sr0, logical block 2096896
[ 1178.952565] Buffer I/O error on device sr0, logical block 2096897
[ 1178.953939] sr 1:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 1178.953951] sr 1:0:0:0: [sr0] Sense Key : Illegal Request [current] 
[ 1178.953961] sr 1:0:0:0: [sr0] Add. Sense: Logical block address out of range
[ 1178.953975] end_request: I/O error, dev sr0, sector 2097128
[ 1178.955462] sr 1:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 1178.955473] sr 1:0:0:0: [sr0] Sense Key : Illegal Request [current] 
[ 1178.955483] sr 1:0:0:0: [sr0] Add. Sense: Logical block address out of range
[ 1178.955496] end_request: I/O error, dev sr0, sector 2097128
[ 1178.955787] sr 1:0:0:0: [sr0] unaligned transfer
[ 1178.955911] sr 1:0:0:0: [sr0] unaligned transfer
[ 1178.955979] sr 1:0:0:0: [sr0] unaligned transfer
[ 1178.956073] sr 1:0:0:0: [sr0] unaligned transfer
[ 1178.956760] sr 1:0:0:0: [sr0] unaligned transfer
[ 1178.956969] sr 1:0:0:0: [sr0] unaligned transfer
[ 1178.958447] sr 1:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 1178.958459] sr 1:0:0:0: [sr0] Sense Key : Illegal Request [current] 
[ 1178.958470] sr 1:0:0:0: [sr0] Add. Sense: Logical block address out of range
[ 1178.958484] end_request: I/O error, dev sr0, sector 2097088
[ 1178.966913] sr 1:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 1178.966928] sr 1:0:0:0: [sr0] Sense Key : Illegal Request [current] 
[ 1178.966940] sr 1:0:0:0: [sr0] Add. Sense: Logical block address out of range
[ 1178.966955] end_request: I/O error, dev sr0, sector 2097136
[ 1178.967170] sr 1:0:0:0: [sr0] unaligned transfer
[ 1178.967319] sr 1:0:0:0: [sr0] unaligned transfer
[ 1179.271911] ISO 9660 Extensions: Microsoft Joliet Level 3
[ 1179.299531] ISOFS: changing to secondary root
[ 1292.186163] Disabling lock debugging due to kernel taint
[ 1292.200388] ndiswrapper version 1.55 loaded (smp=yes, preempt=no)
[ 1292.230485] usbcore: registered new interface driver ndiswrapper
[ 1396.615273] usbcore: deregistering interface driver ndiswrapper
[ 1396.649547] ndiswrapper version 1.55 loaded (smp=yes, preempt=no)
[ 1396.788060] usb 1-2: reset high speed USB device using ehci_hcd and address 3
[ 1396.937942] ndiswrapper (import:242): unknown symbol: ntoskrnl.exe:'MmGetSystemRoutineAddress'
[ 1396.938499] ndiswrapper (load_sys_files:206): couldn't prepare driver 'netucgn'
[ 1396.939466] ndiswrapper (load_wrap_driver:108): couldn't load driver netucgn; check system log for messages from 'loadndisdriver'
[ 1396.939565] usbcore: registered new interface driver ndiswrapper
[ 1447.650952] usbcore: deregistering interface driver ndiswrapper
[ 1447.651114] ndiswrapper (ntoskernel_exit:2677): object eeca0820(2) was not freed, freeing it now
[ 1447.685006] ndiswrapper version 1.55 loaded (smp=yes, preempt=no)
[ 1447.714857] usbcore: registered new interface driver ndiswrapper
[ 2334.656450] usbcore: deregistering interface driver ndiswrapper
[ 2337.937589] ndiswrapper version 1.55 loaded (smp=yes, preempt=no)
[ 2338.100288] usb 1-2: reset high speed USB device using ehci_hcd and address 3
[ 2338.249902] ndiswrapper (import:242): unknown symbol: ntoskrnl.exe:'MmGetSystemRoutineAddress'
[ 2338.250459] ndiswrapper (load_sys_files:206): couldn't prepare driver 'netucgn'
[ 2338.251437] ndiswrapper (load_wrap_driver:108): couldn't load driver netucgn; check system log for messages from 'loadndisdriver'
[ 2338.251536] usbcore: registered new interface driver ndiswrapper
[ 2870.623541] rtusb init --->
[ 2870.624349] 
[ 2870.624353] 
[ 2870.624355] === pAd = f8c29000, size = 471912 ===
[ 2870.624358] 
[ 2870.624363] <-- RTMPAllocAdapterBlock, Status=0
[ 2870.626198] usbcore: registered new interface driver rt2870
[ 2932.527128] usbcore: deregistering interface driver rt2870
[ 2932.527178] rtusb_disconnect: unregister usbnet usb-0000:00:1d.7-2
[ 2932.527186] RtmpOSNetDevDetach(): RtmpOSNetDeviceDetach(), dev->name=ra0!
[ 2932.780135]  RTUSB disconnect successfully
[ 2932.780226] <--- rtusb exit
[ 3183.508188] SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled
[ 3183.508959] SGI XFS Quota Management subsystem
[ 3183.539247] JFS: nTxBlock = 7888, nTxLock = 63109
[ 3183.622527] NTFS driver 2.1.29 [Flags: R/O MODULE].
[ 3183.666412] QNX4 filesystem 0.2.3 registered.
[ 3258.603305] rt2870sta: module is from the staging directory, the quality is unknown, you have been warned.
[ 3258.633928] rtusb init --->
[ 3258.633997] usbcore: registered new interface driver rt2870
[ 3278.761996] usbcore: deregistering interface driver ndiswrapper
[ 3278.762164] ndiswrapper (ntoskernel_exit:2677): object ea8c7120(2) was not freed, freeing it now
[ 3317.696509] usbcore: deregistering interface driver rt2870
[ 3317.696591] <--- rtusb exit
[ 3344.360463] rtusb init --->
[ 3344.361173] 
[ 3344.361176] 
[ 3344.361178] === pAd = f9966000, size = 471912 ===
[ 3344.361181] 
[ 3344.361186] <-- RTMPAllocAdapterBlock, Status=0
[ 3344.362988] usbcore: registered new interface driver rt2870
[ 3740.812632] <-- RTMPAllocTxRxRingMemory, Status=0
[ 3740.814543] -->RTUSBVenderReset
[ 3740.814668] <--RTUSBVenderReset
[ 3741.096796] Key1Str is Invalid key length(0) or Type(0)
[ 3741.096875] Key2Str is Invalid key length(0) or Type(0)
[ 3741.096952] Key3Str is Invalid key length(0) or Type(0)
[ 3741.097031] Key4Str is Invalid key length(0) or Type(0)
[ 3741.098420] 1. Phy Mode = 5
[ 3741.098425] 2. Phy Mode = 5
[ 3741.130016] RTMPSetPhyMode: channel is out of range, use first channel=1 
[ 3741.141884] 3. Phy Mode = 9
[ 3741.149885] MCS Set = ff 00 00 00 01
[ 3741.154140] <==== rt28xx_init, Status=0
[ 3741.155615] 0x1300 = 00064300
[ 3751.592062] ra0: no IPv6 routers present
[ 4125.296203] #
[ 4298.729661] ---> RTMPFreeTxRxRingMemory
[ 4298.729720] <--- RTMPFreeTxRxRingMemory
[ 4299.216549] <-- RTMPAllocTxRxRingMemory, Status=0
[ 4299.218455] -->RTUSBVenderReset
[ 4299.218580] <--RTUSBVenderReset
[ 4299.504666] CfgSetCountryRegion():CountryRegion in eeprom was programmed
[ 4299.504694] CfgSetCountryRegion():CountryRegion in eeprom was programmed
[ 4299.505817] Key1Str is Invalid key length(0) or Type(0)
[ 4299.505892] Key2Str is Invalid key length(0) or Type(0)
[ 4299.505969] Key3Str is Invalid key length(0) or Type(0)
[ 4299.506048] Key4Str is Invalid key length(0) or Type(0)
[ 4299.507436] 1. Phy Mode = 5
[ 4299.507441] 2. Phy Mode = 5
[ 4299.539052] RTMPSetPhyMode: channel is out of range, use first channel=1 
[ 4299.551045] 3. Phy Mode = 9
[ 4299.559047] MCS Set = ff 00 00 00 01
[ 4299.563299] <==== rt28xx_init, Status=0
[ 4299.564797] 0x1300 = 00064300
[ 4310.440044] ra0: no IPv6 routers present
[ 4325.664903] #
[ 4372.448257] #
[ 4372.489597] #
[ 4516.285281] ---> RTMPFreeTxRxRingMemory
[ 4516.285337] <--- RTMPFreeTxRxRingMemory
[ 4517.351115] usbcore: deregistering interface driver rt2870
[ 4517.351178] rtusb_disconnect: unregister usbnet usb-0000:00:1d.7-2
[ 4517.351187] RtmpOSNetDevDetach(): RtmpOSNetDeviceDetach(), dev->name=ra0!
[ 4517.604158]  RTUSB disconnect successfully
[ 4517.604251] <--- rtusb exit
[ 4548.571015] rt2870sta: module is from the staging directory, the quality is unknown, you have been warned.
[ 4548.605871] rtusb init --->
[ 4548.605957] usbcore: registered new interface driver rt2870
[ 4587.694555] usbcore: deregistering interface driver rt2870
[ 4587.694645] <--- rtusb exit
[ 4595.203409] rtusb init --->
[ 4595.204236] 
[ 4595.204239] 
[ 4595.204241] === pAd = fab6b000, size = 471912 ===
[ 4595.204244] 
[ 4595.204249] <-- RTMPAllocAdapterBlock, Status=0
[ 4595.206188] usbcore: registered new interface driver rt2870
[ 4595.588509] <-- RTMPAllocTxRxRingMemory, Status=0
[ 4595.590423] -->RTUSBVenderReset
[ 4595.590547] <--RTUSBVenderReset
[ 4595.871701] Key1Str is Invalid key length(0) or Type(0)
[ 4595.871781] Key2Str is Invalid key length(0) or Type(0)
[ 4595.871860] Key3Str is Invalid key length(0) or Type(0)
[ 4595.871941] Key4Str is Invalid key length(0) or Type(0)
[ 4595.873390] 1. Phy Mode = 5
[ 4595.873396] 2. Phy Mode = 5
[ 4595.904521] RTMPSetPhyMode: channel is out of range, use first channel=1 
[ 4595.916389] 3. Phy Mode = 9
[ 4595.924392] MCS Set = ff 00 00 00 01
[ 4595.928643] <==== rt28xx_init, Status=0
[ 4595.931392] 0x1300 = 00064300
[ 4606.524043] ra0: no IPv6 routers present
[ 5195.931030] ---> RTMPFreeTxRxRingMemory
[ 5195.931075] <--- RTMPFreeTxRxRingMemory
[ 5407.056273] <-- RTMPAllocTxRxRingMemory, Status=0
[ 5407.058147] -->RTUSBVenderReset
[ 5407.058271] <--RTUSBVenderReset
[ 5407.339723] CfgSetCountryRegion():CountryRegion in eeprom was programmed
[ 5407.339752] CfgSetCountryRegion():CountryRegion in eeprom was programmed
[ 5407.340931] Key1Str is Invalid key length(0) or Type(0)
[ 5407.341009] Key2Str is Invalid key length(0) or Type(0)
[ 5407.341087] Key3Str is Invalid key length(0) or Type(0)
[ 5407.341167] Key4Str is Invalid key length(0) or Type(0)
[ 5407.342598] 1. Phy Mode = 5
[ 5407.342603] 2. Phy Mode = 5
[ 5407.374119] RTMPSetPhyMode: channel is out of range, use first channel=1 
[ 5407.385987] 3. Phy Mode = 9
[ 5407.393989] MCS Set = ff 00 00 00 01
[ 5407.398242] <==== rt28xx_init, Status=0
[ 5407.399717] 0x1300 = 00064300
[ 5417.536057] ra0: no IPv6 routers present
[ 5476.927026] ---> RTMPFreeTxRxRingMemory
[ 5476.927086] <--- RTMPFreeTxRxRingMemory
[ 5478.765972] <-- RTMPAllocTxRxRingMemory, Status=0
[ 5478.767818] -->RTUSBVenderReset
[ 5478.767941] <--RTUSBVenderReset
[ 5479.053529] CfgSetCountryRegion():CountryRegion in eeprom was programmed
[ 5479.053560] CfgSetCountryRegion():CountryRegion in eeprom was programmed
[ 5479.054708] Key1Str is Invalid key length(0) or Type(0)
[ 5479.054785] Key2Str is Invalid key length(0) or Type(0)
[ 5479.054866] Key3Str is Invalid key length(0) or Type(0)
[ 5479.054948] Key4Str is Invalid key length(0) or Type(0)
[ 5479.056403] 1. Phy Mode = 5
[ 5479.056409] 2. Phy Mode = 5
[ 5479.089040] RTMPSetPhyMode: channel is out of range, use first channel=1 
[ 5479.102662] 3. Phy Mode = 9
[ 5479.110659] MCS Set = ff 00 00 00 01
[ 5479.114910] <==== rt28xx_init, Status=0
[ 5479.119913] 0x1300 = 00064300
[ 5489.516058] ra0: no IPv6 routers present
[ 6327.760224] #