Sep 29 22:08:43 BrianLinux kernel: imklog 4.2.0, log source = /var/run/rsyslog/kmsg started. Sep 29 22:08:43 BrianLinux kernel: [ 0.000000] Initializing cgroup subsys cpuset Sep 29 22:08:43 BrianLinux kernel: [ 0.000000] Initializing cgroup subsys cpu Sep 29 22:08:43 BrianLinux kernel: [ 0.000000] Linux version 2.6.31-10-generic (buildd@rothera) (gcc version 4.4.1 (Ubuntu 4.4.1-4ubuntu1) ) #35-Ubuntu SMP Tue Sep 22 17:33:42 UTC 2009 (Ubuntu 2.6.31-10.35-generic) Sep 29 22:08:43 BrianLinux kernel: [ 0.000000] KERNEL supported cpus: Sep 29 22:08:43 BrianLinux kernel: [ 0.000000] Intel GenuineIntel Sep 29 22:08:43 BrianLinux kernel: [ 0.000000] AMD AuthenticAMD Sep 29 22:08:43 BrianLinux kernel: [ 0.000000] NSC Geode by NSC Sep 29 22:08:43 BrianLinux kernel: [ 0.000000] Cyrix CyrixInstead Sep 29 22:08:43 BrianLinux kernel: [ 0.000000] Centaur CentaurHauls Sep 29 22:08:43 BrianLinux kernel: [ 0.000000] Transmeta GenuineTMx86 Sep 29 22:08:43 BrianLinux kernel: [ 0.000000] Transmeta TransmetaCPU Sep 29 22:08:43 BrianLinux kernel: [ 0.000000] UMC UMC UMC UMC Sep 29 22:08:43 BrianLinux kernel: [ 0.000000] BIOS-provided physical RAM map: Sep 29 22:08:43 BrianLinux kernel: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable) Sep 29 22:08:43 BrianLinux kernel: [ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) Sep 29 22:08:43 BrianLinux kernel: [ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) Sep 29 22:08:43 BrianLinux kernel: [ 0.000000] BIOS-e820: 0000000000100000 - 000000007f680000 (usable) Sep 29 22:08:43 BrianLinux kernel: [ 0.000000] BIOS-e820: 000000007f680000 - 000000007f700000 (ACPI NVS) Sep 29 22:08:43 BrianLinux kernel: [ 0.000000] BIOS-e820: 000000007f700000 - 0000000080000000 (reserved) Sep 29 22:08:43 BrianLinux kernel: [ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) Sep 29 22:08:43 BrianLinux kernel: [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) Sep 29 22:08:43 BrianLinux kernel: [ 0.000000] BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved) Sep 29 22:08:43 BrianLinux kernel: [ 0.000000] BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved) Sep 29 22:08:43 BrianLinux kernel: [ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved) Sep 29 22:08:43 BrianLinux kernel: [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) Sep 29 22:08:43 BrianLinux kernel: [ 0.000000] BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved) Sep 29 22:08:43 BrianLinux kernel: [ 0.000000] DMI present. Sep 29 22:08:43 BrianLinux kernel: [ 0.000000] last_pfn = 0x7f680 max_arch_pfn = 0x100000 Sep 29 22:08:43 BrianLinux kernel: [ 0.000000] MTRR default type: uncachable Sep 29 22:08:43 BrianLinux kernel: [ 0.000000] MTRR fixed ranges enabled: Sep 29 22:08:43 BrianLinux kernel: [ 0.000000] 00000-9FFFF write-back Sep 29 22:08:43 BrianLinux kernel: [ 0.000000] A0000-BFFFF uncachable Sep 29 22:08:43 BrianLinux kernel: [ 0.000000] C0000-CFFFF write-protect Sep 29 22:08:43 BrianLinux kernel: [ 0.000000] D0000-DFFFF uncachable Sep 29 22:08:43 BrianLinux kernel: [ 0.000000] E0000-FFFFF write-protect Sep 29 22:08:43 BrianLinux kernel: [ 0.000000] MTRR variable ranges enabled: Sep 29 22:08:43 BrianLinux kernel: [ 0.000000] 0 base 000000000 mask F80000000 write-back Sep 29 22:08:43 BrianLinux kernel: [ 0.000000] 1 base 07F700000 mask FFFF00000 uncachable Sep 29 22:08:43 BrianLinux kernel: [ 0.000000] 2 base 07F800000 mask FFF800000 uncachable Sep 29 22:08:43 BrianLinux kernel: [ 0.000000] 3 disabled Sep 29 22:08:43 BrianLinux kernel: [ 0.000000] 4 disabled Sep 29 22:08:43 BrianLinux kernel: [ 0.000000] 5 disabled Sep 29 22:08:43 BrianLinux kernel: [ 0.000000] 6 disabled Sep 29 22:08:43 BrianLinux kernel: [ 0.000000] 7 disabled Sep 29 22:08:43 BrianLinux kernel: [ 0.000000] e820 update range: 0000000000002000 - 0000000000006000 (usable) ==> (reserved) Sep 29 22:08:43 BrianLinux kernel: [ 0.000000] Scanning 1 areas for low memory corruption Sep 29 22:08:43 BrianLinux kernel: [ 0.000000] modified physical RAM map: Sep 29 22:08:43 BrianLinux kernel: [ 0.000000] modified: 0000000000000000 - 0000000000002000 (usable) Sep 29 22:08:43 BrianLinux kernel: [ 0.000000] modified: 0000000000002000 - 0000000000006000 (reserved) Sep 29 22:08:43 BrianLinux kernel: [ 0.000000] modified: 0000000000006000 - 000000000009f800 (usable) Sep 29 22:08:43 BrianLinux kernel: [ 0.000000] modified: 000000000009f800 - 00000000000a0000 (reserved) Sep 29 22:08:43 BrianLinux kernel: [ 0.000000] modified: 00000000000e0000 - 0000000000100000 (reserved) Sep 29 22:08:43 BrianLinux kernel: [ 0.000000] modified: 0000000000100000 - 000000007f680000 (usable) Sep 29 22:08:43 BrianLinux kernel: [ 0.000000] modified: 000000007f680000 - 000000007f700000 (ACPI NVS) Sep 29 22:08:43 BrianLinux kernel: [ 0.000000] modified: 000000007f700000 - 0000000080000000 (reserved) Sep 29 22:08:43 BrianLinux kernel: [ 0.000000] modified: 00000000e0000000 - 00000000f0000000 (reserved) Sep 29 22:08:43 BrianLinux kernel: [ 0.000000] modified: 00000000fec00000 - 00000000fec10000 (reserved) Sep 29 22:08:43 BrianLinux kernel: [ 0.000000] modified: 00000000fed00000 - 00000000fed00400 (reserved) Sep 29 22:08:43 BrianLinux kernel: [ 0.000000] modified: 00000000fed14000 - 00000000fed1a000 (reserved) Sep 29 22:08:43 BrianLinux kernel: [ 0.000000] modified: 00000000fed1c000 - 00000000fed90000 (reserved) Sep 29 22:08:43 BrianLinux kernel: [ 0.000000] modified: 00000000fee00000 - 00000000fee01000 (reserved) Sep 29 22:08:43 BrianLinux kernel: [ 0.000000] modified: 00000000ff000000 - 0000000100000000 (reserved) Sep 29 22:08:43 BrianLinux kernel: [ 0.000000] initial memory mapped : 0 - 00c00000 Sep 29 22:08:43 BrianLinux kernel: [ 0.000000] init_memory_mapping: 0000000000000000-00000000377fe000 Sep 29 22:08:43 BrianLinux kernel: [ 0.000000] Using x86 segment limits to approximate NX protection Sep 29 22:08:43 BrianLinux kernel: [ 0.000000] 0000000000 - 0000400000 page 4k Sep 29 22:08:43 BrianLinux kernel: [ 0.000000] 0000400000 - 0037400000 page 2M Sep 29 22:08:43 BrianLinux kernel: [ 0.000000] 0037400000 - 00377fe000 page 4k Sep 29 22:08:43 BrianLinux kernel: [ 0.000000] kernel direct mapping tables up to 377fe000 @ 7000-c000 Sep 29 22:08:43 BrianLinux kernel: [ 0.000000] RAMDISK: 37975000 - 37fefa88 Sep 29 22:08:43 BrianLinux kernel: [ 0.000000] Allocated new RAMDISK: 008a4000 - 00f1ea88 Sep 29 22:08:43 BrianLinux kernel: [ 0.000000] Move RAMDISK from 0000000037975000 - 0000000037fefa87 to 008a4000 - 00f1ea87 Sep 29 22:08:43 BrianLinux kernel: [ 0.000000] ACPI: RSDP 000f6510 00014 (v00 PTLTD ) Sep 29 22:08:43 BrianLinux kernel: [ 0.000000] ACPI: RSDT 7f68cee1 0004C (v01 HPQOEM SLIC-MPC 06040000 LTP 00000000) Sep 29 22:08:43 BrianLinux kernel: [ 0.000000] ACPI: FACP 7f693c86 00074 (v01 HP NISSAN 06040000 LOHR 0000005A) Sep 29 22:08:43 BrianLinux kernel: [ 0.000000] ACPI: DSDT 7f68d80d 06479 (v01 HP NISSAN 06040000 INTL 20060608) Sep 29 22:08:43 BrianLinux kernel: [ 0.000000] ACPI: FACS 7f694fc0 00040 Sep 29 22:08:43 BrianLinux kernel: [ 0.000000] ACPI: APIC 7f693cfa 00068 (v01 HP NISSAN 06040000 LOHR 0000005A) Sep 29 22:08:43 BrianLinux kernel: [ 0.000000] ACPI: HPET 7f693d62 00038 (v01 HP NISSAN 06040000 LOHR 0000005A) Sep 29 22:08:43 BrianLinux kernel: [ 0.000000] ACPI: MCFG 7f693d9a 0003C (v01 HP NISSAN 06040000 LOHR 0000005A) Sep 29 22:08:43 BrianLinux kernel: [ 0.000000] ACPI: BOOT 7f693fd8 00028 (v01 PTLTD $SBFTBL$ 06040000 LTP 00000001) Sep 29 22:08:43 BrianLinux kernel: [ 0.000000] ACPI: SLIC 7f693e08 00176 (v01 HPQOEM SLIC-MPC 06040000 LOHR 00000000) Sep 29 22:08:43 BrianLinux kernel: [ 0.000000] ACPI: APIC 7f693f7e 0005A (v01 PTLTD APIC 06040000 LTP 00000000) Sep 29 22:08:43 BrianLinux kernel: [ 0.000000] ACPI: SSDT 7f68d5ff 0020A (v01 SataRe SataAhci 00001000 INTL 20060217) Sep 29 22:08:43 BrianLinux kernel: [ 0.000000] ACPI: SSDT 7f68d423 001DC (v01 PmRef Cpu0Cst 00003001 INTL 20060217) Sep 29 22:08:43 BrianLinux kernel: [ 0.000000] ACPI: SSDT 7f68cf2d 004F6 (v01 PmRef CpuPm 00003000 INTL 20060217) Sep 29 22:08:43 BrianLinux kernel: [ 0.000000] ACPI: BIOS bug: multiple APIC/MADT found, using 0 Sep 29 22:08:43 BrianLinux kernel: [ 0.000000] ACPI: If "acpi_apic_instance=2" works better, notify linux-acpi@vger.kernel.org Sep 29 22:08:43 BrianLinux kernel: [ 0.000000] ACPI: Local APIC address 0xfee00000 Sep 29 22:08:43 BrianLinux kernel: [ 0.000000] 1150MB HIGHMEM available. Sep 29 22:08:43 BrianLinux kernel: [ 0.000000] 887MB LOWMEM available. Sep 29 22:08:43 BrianLinux kernel: [ 0.000000] mapped low ram: 0 - 377fe000 Sep 29 22:08:43 BrianLinux kernel: [ 0.000000] low ram: 0 - 377fe000 Sep 29 22:08:43 BrianLinux kernel: [ 0.000000] node 0 low ram: 00000000 - 377fe000 Sep 29 22:08:43 BrianLinux kernel: [ 0.000000] node 0 bootmap 00008000 - 0000ef00 Sep 29 22:08:43 BrianLinux kernel: [ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 00377fe000] Sep 29 22:08:43 BrianLinux kernel: [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] Sep 29 22:08:43 BrianLinux kernel: [ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000] Sep 29 22:08:43 BrianLinux kernel: [ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000] Sep 29 22:08:43 BrianLinux kernel: [ 0.000000] #3 [0000100000 - 000089f080] TEXT DATA BSS ==> [0000100000 - 000089f080] Sep 29 22:08:43 BrianLinux kernel: [ 0.000000] #4 [000009f800 - 0000100000] BIOS reserved ==> [000009f800 - 0000100000] Sep 29 22:08:43 BrianLinux kernel: [ 0.000000] #5 [00008a0000 - 00008a312c] BRK ==> [00008a0000 - 00008a312c] Sep 29 22:08:43 BrianLinux kernel: [ 0.000000] #6 [0000007000 - 0000008000] PGTABLE ==> [0000007000 - 0000008000] Sep 29 22:08:43 BrianLinux kernel: [ 0.000000] #7 [00008a4000 - 0000f1ea88] NEW RAMDISK ==> [00008a4000 - 0000f1ea88] Sep 29 22:08:43 BrianLinux kernel: [ 0.000000] #8 [0000008000 - 000000f000] BOOTMAP ==> [0000008000 - 000000f000] Sep 29 22:08:43 BrianLinux kernel: [ 0.000000] found SMP MP-table at [c00f65c0] f65c0 Sep 29 22:08:43 BrianLinux kernel: [ 0.000000] Zone PFN ranges: Sep 29 22:08:43 BrianLinux kernel: [ 0.000000] DMA 0x00000000 -> 0x00001000 Sep 29 22:08:43 BrianLinux kernel: [ 0.000000] Normal 0x00001000 -> 0x000377fe Sep 29 22:08:43 BrianLinux kernel: [ 0.000000] HighMem 0x000377fe -> 0x0007f680 Sep 29 22:08:43 BrianLinux kernel: [ 0.000000] Movable zone start PFN for each node Sep 29 22:08:43 BrianLinux kernel: [ 0.000000] early_node_map[3] active PFN ranges Sep 29 22:08:43 BrianLinux kernel: [ 0.000000] 0: 0x00000000 -> 0x00000002 Sep 29 22:08:43 BrianLinux kernel: [ 0.000000] 0: 0x00000006 -> 0x0000009f Sep 29 22:08:43 BrianLinux kernel: [ 0.000000] 0: 0x00000100 -> 0x0007f680 Sep 29 22:08:43 BrianLinux kernel: [ 0.000000] On node 0 totalpages: 521755 Sep 29 22:08:43 BrianLinux kernel: [ 0.000000] free_area_init_node: node 0, pgdat c077b840, node_mem_map c1000000 Sep 29 22:08:43 BrianLinux kernel: [ 0.000000] DMA zone: 32 pages used for memmap Sep 29 22:08:43 BrianLinux kernel: [ 0.000000] DMA zone: 0 pages reserved Sep 29 22:08:43 BrianLinux kernel: [ 0.000000] DMA zone: 3963 pages, LIFO batch:0 Sep 29 22:08:43 BrianLinux kernel: [ 0.000000] Normal zone: 1744 pages used for memmap Sep 29 22:08:43 BrianLinux kernel: [ 0.000000] Normal zone: 221486 pages, LIFO batch:31 Sep 29 22:08:43 BrianLinux kernel: [ 0.000000] HighMem zone: 2302 pages used for memmap Sep 29 22:08:43 BrianLinux kernel: [ 0.000000] HighMem zone: 292228 pages, LIFO batch:31 Sep 29 22:08:43 BrianLinux kernel: [ 0.000000] Using APIC driver default Sep 29 22:08:43 BrianLinux kernel: [ 0.000000] ACPI: PM-Timer IO Port: 0x1008 Sep 29 22:08:43 BrianLinux kernel: [ 0.000000] ACPI: Local APIC address 0xfee00000 Sep 29 22:08:43 BrianLinux kernel: [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) Sep 29 22:08:43 BrianLinux kernel: [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] disabled) Sep 29 22:08:43 BrianLinux kernel: [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) Sep 29 22:08:43 BrianLinux kernel: [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) Sep 29 22:08:43 BrianLinux kernel: [ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) Sep 29 22:08:43 BrianLinux kernel: [ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23 Sep 29 22:08:43 BrianLinux kernel: [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) Sep 29 22:08:43 BrianLinux kernel: [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) Sep 29 22:08:43 BrianLinux kernel: [ 0.000000] ACPI: IRQ0 used by override. Sep 29 22:08:43 BrianLinux kernel: [ 0.000000] ACPI: IRQ2 used by override. Sep 29 22:08:43 BrianLinux kernel: [ 0.000000] ACPI: IRQ9 used by override. Sep 29 22:08:43 BrianLinux kernel: [ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs Sep 29 22:08:43 BrianLinux kernel: [ 0.000000] Using ACPI (MADT) for SMP configuration information Sep 29 22:08:43 BrianLinux kernel: [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 Sep 29 22:08:43 BrianLinux kernel: [ 0.000000] SMP: Allowing 2 CPUs, 1 hotplug CPUs Sep 29 22:08:43 BrianLinux kernel: [ 0.000000] nr_irqs_gsi: 24 Sep 29 22:08:43 BrianLinux kernel: [ 0.000000] PM: Registered nosave memory: 0000000000002000 - 0000000000006000 Sep 29 22:08:43 BrianLinux kernel: [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 Sep 29 22:08:43 BrianLinux kernel: [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000 Sep 29 22:08:43 BrianLinux kernel: [ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000 Sep 29 22:08:43 BrianLinux kernel: [ 0.000000] Allocating PCI resources starting at 80000000 (gap: 80000000:60000000) Sep 29 22:08:43 BrianLinux kernel: [ 0.000000] NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1 Sep 29 22:08:43 BrianLinux kernel: [ 0.000000] PERCPU: Embedded 14 pages at c1ffa000, static data 35036 bytes Sep 29 22:08:43 BrianLinux kernel: [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 517677 Sep 29 22:08:43 BrianLinux kernel: [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.31-10-generic root=UUID=a1103df1-e387-4fe4-9131-bb6f1d3dd864 ro quiet splash Sep 29 22:08:43 BrianLinux kernel: [ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes) Sep 29 22:08:43 BrianLinux kernel: [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Sep 29 22:08:43 BrianLinux kernel: [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Sep 29 22:08:43 BrianLinux kernel: [ 0.000000] Enabling fast FPU save and restore... done. Sep 29 22:08:43 BrianLinux kernel: [ 0.000000] Enabling unmasked SIMD FPU exception support... done. Sep 29 22:08:43 BrianLinux kernel: [ 0.000000] Initializing CPU#0 Sep 29 22:08:43 BrianLinux kernel: [ 0.000000] allocated 10437120 bytes of page_cgroup Sep 29 22:08:43 BrianLinux kernel: [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups Sep 29 22:08:43 BrianLinux kernel: [ 0.000000] Initializing HighMem for node 0 (000377fe:0007f680) Sep 29 22:08:43 BrianLinux kernel: [ 0.000000] Memory: 2044144k/2087424k available (4543k kernel code, 41948k reserved, 2129k data, 540k init, 1178120k highmem) Sep 29 22:08:43 BrianLinux kernel: [ 0.000000] virtual kernel memory layout: Sep 29 22:08:43 BrianLinux kernel: [ 0.000000] fixmap : 0xfff1d000 - 0xfffff000 ( 904 kB) Sep 29 22:08:43 BrianLinux kernel: [ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB) Sep 29 22:08:43 BrianLinux kernel: [ 0.000000] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB) Sep 29 22:08:43 BrianLinux kernel: [ 0.000000] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB) Sep 29 22:08:43 BrianLinux kernel: [ 0.000000] .init : 0xc0785000 - 0xc080c000 ( 540 kB) Sep 29 22:08:43 BrianLinux kernel: [ 0.000000] .data : 0xc056fd84 - 0xc07841a8 (2129 kB) Sep 29 22:08:43 BrianLinux kernel: [ 0.000000] .text : 0xc0100000 - 0xc056fd84 (4543 kB) Sep 29 22:08:43 BrianLinux kernel: [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok. Sep 29 22:08:43 BrianLinux kernel: [ 0.000000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 Sep 29 22:08:43 BrianLinux kernel: [ 0.000000] NR_IRQS:2304 nr_irqs:424 Sep 29 22:08:43 BrianLinux kernel: [ 0.000000] Fast TSC calibration using PIT Sep 29 22:08:43 BrianLinux kernel: [ 0.000000] Detected 1596.044 MHz processor. Sep 29 22:08:43 BrianLinux kernel: [ 0.001872] Console: colour VGA+ 80x25 Sep 29 22:08:43 BrianLinux kernel: [ 0.001877] console [tty0] enabled Sep 29 22:08:43 BrianLinux kernel: [ 0.002089] hpet clockevent registered Sep 29 22:08:43 BrianLinux kernel: [ 0.002094] HPET: 3 timers in total, 0 timers will be used for per-cpu timer Sep 29 22:08:43 BrianLinux kernel: [ 0.002101] Calibrating delay loop (skipped), value calculated using timer frequency.. 3192.08 BogoMIPS (lpj=6384176) Sep 29 22:08:43 BrianLinux kernel: [ 0.002125] Security Framework initialized Sep 29 22:08:43 BrianLinux kernel: [ 0.002155] AppArmor: AppArmor initialized Sep 29 22:08:43 BrianLinux kernel: [ 0.002163] Mount-cache hash table entries: 512 Sep 29 22:08:43 BrianLinux kernel: [ 0.002334] Initializing cgroup subsys ns Sep 29 22:08:43 BrianLinux kernel: [ 0.002341] Initializing cgroup subsys cpuacct Sep 29 22:08:43 BrianLinux kernel: [ 0.002346] Initializing cgroup subsys memory Sep 29 22:08:43 BrianLinux kernel: [ 0.002354] Initializing cgroup subsys freezer Sep 29 22:08:43 BrianLinux kernel: [ 0.002357] Initializing cgroup subsys net_cls Sep 29 22:08:43 BrianLinux kernel: [ 0.002377] CPU: L1 I cache: 32K, L1 D cache: 32K Sep 29 22:08:43 BrianLinux kernel: [ 0.002381] CPU: L2 cache: 1024K Sep 29 22:08:43 BrianLinux kernel: [ 0.002386] using mwait in idle threads. Sep 29 22:08:43 BrianLinux kernel: [ 0.002394] Performance Counters: no PMU driver, software counters only. Sep 29 22:08:43 BrianLinux kernel: [ 0.002402] Checking 'hlt' instruction... OK. Sep 29 22:08:43 BrianLinux kernel: [ 0.017035] SMP alternatives: switching to UP code Sep 29 22:08:43 BrianLinux kernel: [ 0.024007] ACPI: Core revision 20090521 Sep 29 22:08:43 BrianLinux kernel: [ 0.040465] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 Sep 29 22:08:43 BrianLinux kernel: [ 0.081495] CPU0: Intel(R) Celeron(R) M CPU 420 @ 1.60GHz stepping 08 Sep 29 22:08:43 BrianLinux kernel: [ 0.084001] Brought up 1 CPUs Sep 29 22:08:43 BrianLinux kernel: [ 0.084001] Total of 1 processors activated (3192.08 BogoMIPS). Sep 29 22:08:43 BrianLinux kernel: [ 0.084001] CPU0 attaching NULL sched-domain. Sep 29 22:08:43 BrianLinux kernel: [ 0.084001] Booting paravirtualized kernel on bare hardware Sep 29 22:08:43 BrianLinux kernel: [ 0.084001] regulator: core version 0.5 Sep 29 22:08:43 BrianLinux kernel: [ 0.084001] Time: 22:08:32 Date: 09/29/09 Sep 29 22:08:43 BrianLinux kernel: [ 0.084001] NET: Registered protocol family 16 Sep 29 22:08:43 BrianLinux kernel: [ 0.084001] EISA bus registered Sep 29 22:08:43 BrianLinux kernel: [ 0.084001] ACPI: bus type pci registered Sep 29 22:08:43 BrianLinux kernel: [ 0.084001] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255 Sep 29 22:08:43 BrianLinux kernel: [ 0.084001] PCI: MCFG area at e0000000 reserved in E820 Sep 29 22:08:43 BrianLinux kernel: [ 0.084001] PCI: Using MMCONFIG for extended config space Sep 29 22:08:43 BrianLinux kernel: [ 0.084001] PCI: Using configuration type 1 for base access Sep 29 22:08:43 BrianLinux kernel: [ 0.084001] bio: create slab at 0 Sep 29 22:08:43 BrianLinux kernel: [ 0.084001] ACPI: EC: Look up EC in DSDT Sep 29 22:08:43 BrianLinux kernel: [ 0.086129] ACPI: BIOS _OSI(Linux) query ignored Sep 29 22:08:43 BrianLinux kernel: [ 0.086850] ACPI: Interpreter enabled Sep 29 22:08:43 BrianLinux kernel: [ 0.086861] ACPI: (supports S0 S3 S4 S5) Sep 29 22:08:43 BrianLinux kernel: [ 0.086885] ACPI: Using IOAPIC for interrupt routing Sep 29 22:08:43 BrianLinux kernel: [ 0.092575] ACPI: EC: non-query interrupt received, switching to interrupt mode Sep 29 22:08:43 BrianLinux kernel: [ 0.121231] ACPI: EC: GPE storm detected, transactions will use polling mode Sep 29 22:08:43 BrianLinux kernel: [ 0.396639] ACPI: EC: GPE = 0x19, I/O: command/status = 0x66, data = 0x62 Sep 29 22:08:43 BrianLinux kernel: [ 0.396643] ACPI: EC: driver started in poll mode Sep 29 22:08:43 BrianLinux kernel: [ 0.396982] ACPI: No dock devices found. Sep 29 22:08:43 BrianLinux kernel: [ 0.397609] ACPI: PCI Root Bridge [PCI0] (0000:00) Sep 29 22:08:43 BrianLinux kernel: [ 0.397721] pci 0000:00:02.0: reg 10 32bit mmio: [0xd0200000-0xd027ffff] Sep 29 22:08:43 BrianLinux kernel: [ 0.397728] pci 0000:00:02.0: reg 14 io port: [0x1800-0x1807] Sep 29 22:08:43 BrianLinux kernel: [ 0.397735] pci 0000:00:02.0: reg 18 32bit mmio: [0xc0000000-0xcfffffff] Sep 29 22:08:43 BrianLinux kernel: [ 0.397741] pci 0000:00:02.0: reg 1c 32bit mmio: [0xd0300000-0xd033ffff] Sep 29 22:08:43 BrianLinux kernel: [ 0.397788] pci 0000:00:02.1: reg 10 32bit mmio: [0xd0280000-0xd02fffff] Sep 29 22:08:43 BrianLinux kernel: [ 0.397915] pci 0000:00:1b.0: reg 10 64bit mmio: [0xd0340000-0xd0343fff] Sep 29 22:08:43 BrianLinux kernel: [ 0.397980] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold Sep 29 22:08:43 BrianLinux kernel: [ 0.397986] pci 0000:00:1b.0: PME# disabled Sep 29 22:08:43 BrianLinux kernel: [ 0.398084] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold Sep 29 22:08:43 BrianLinux kernel: [ 0.398090] pci 0000:00:1c.0: PME# disabled Sep 29 22:08:43 BrianLinux kernel: [ 0.398187] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold Sep 29 22:08:43 BrianLinux kernel: [ 0.398193] pci 0000:00:1c.2: PME# disabled Sep 29 22:08:43 BrianLinux kernel: [ 0.398266] pci 0000:00:1d.0: reg 20 io port: [0x1820-0x183f] Sep 29 22:08:43 BrianLinux kernel: [ 0.398335] pci 0000:00:1d.1: reg 20 io port: [0x1840-0x185f] Sep 29 22:08:43 BrianLinux kernel: [ 0.398405] pci 0000:00:1d.2: reg 20 io port: [0x1860-0x187f] Sep 29 22:08:43 BrianLinux kernel: [ 0.398480] pci 0000:00:1d.7: reg 10 32bit mmio: [0xd0544000-0xd05443ff] Sep 29 22:08:43 BrianLinux kernel: [ 0.398549] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold Sep 29 22:08:43 BrianLinux kernel: [ 0.398556] pci 0000:00:1d.7: PME# disabled Sep 29 22:08:43 BrianLinux kernel: [ 0.398737] pci 0000:00:1f.0: quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO Sep 29 22:08:43 BrianLinux kernel: [ 0.398742] pci 0000:00:1f.0: quirk: region 1180-11bf claimed by ICH6 GPIO Sep 29 22:08:43 BrianLinux kernel: [ 0.398807] pci 0000:00:1f.1: reg 10 io port: [0x00-0x07] Sep 29 22:08:43 BrianLinux kernel: [ 0.398817] pci 0000:00:1f.1: reg 14 io port: [0x00-0x03] Sep 29 22:08:43 BrianLinux kernel: [ 0.398825] pci 0000:00:1f.1: reg 18 io port: [0x00-0x07] Sep 29 22:08:43 BrianLinux kernel: [ 0.398835] pci 0000:00:1f.1: reg 1c io port: [0x00-0x03] Sep 29 22:08:43 BrianLinux kernel: [ 0.398844] pci 0000:00:1f.1: reg 20 io port: [0x1810-0x181f] Sep 29 22:08:43 BrianLinux kernel: [ 0.398916] pci 0000:00:1f.2: reg 10 io port: [0x18b0-0x18b7] Sep 29 22:08:43 BrianLinux kernel: [ 0.398925] pci 0000:00:1f.2: reg 14 io port: [0x18a4-0x18a7] Sep 29 22:08:43 BrianLinux kernel: [ 0.398934] pci 0000:00:1f.2: reg 18 io port: [0x18a8-0x18af] Sep 29 22:08:43 BrianLinux kernel: [ 0.398943] pci 0000:00:1f.2: reg 1c io port: [0x18a0-0x18a3] Sep 29 22:08:43 BrianLinux kernel: [ 0.398952] pci 0000:00:1f.2: reg 20 io port: [0x1890-0x189f] Sep 29 22:08:43 BrianLinux kernel: [ 0.398962] pci 0000:00:1f.2: reg 24 32bit mmio: [0xd0544400-0xd05447ff] Sep 29 22:08:43 BrianLinux kernel: [ 0.399002] pci 0000:00:1f.2: PME# supported from D3hot Sep 29 22:08:43 BrianLinux kernel: [ 0.399007] pci 0000:00:1f.2: PME# disabled Sep 29 22:08:43 BrianLinux kernel: [ 0.399077] pci 0000:00:1f.3: reg 20 io port: [0x18c0-0x18df] Sep 29 22:08:43 BrianLinux kernel: [ 0.399175] pci 0000:00:1c.0: bridge io port: [0x00-0xfff] Sep 29 22:08:43 BrianLinux kernel: [ 0.399182] pci 0000:00:1c.0: bridge 32bit mmio: [0x000000-0x0fffff] Sep 29 22:08:43 BrianLinux kernel: [ 0.399363] pci 0000:06:00.0: reg 10 32bit mmio: [0xd0000000-0xd0003fff] Sep 29 22:08:43 BrianLinux kernel: [ 0.399644] pci 0000:06:00.0: supports D1 D2 Sep 29 22:08:43 BrianLinux kernel: [ 0.399770] pci 0000:00:1c.2: bridge io port: [0x00-0xfff] Sep 29 22:08:43 BrianLinux kernel: [ 0.399776] pci 0000:00:1c.2: bridge 32bit mmio: [0x000000-0x0fffff] Sep 29 22:08:43 BrianLinux kernel: [ 0.399849] pci 0000:08:08.0: reg 10 io port: [0x2000-0x20ff] Sep 29 22:08:43 BrianLinux kernel: [ 0.399860] pci 0000:08:08.0: reg 14 32bit mmio: [0xd0100000-0xd01000ff] Sep 29 22:08:43 BrianLinux kernel: [ 0.399925] pci 0000:08:08.0: supports D1 D2 Sep 29 22:08:43 BrianLinux kernel: [ 0.399928] pci 0000:08:08.0: PME# supported from D1 D2 D3hot D3cold Sep 29 22:08:43 BrianLinux kernel: [ 0.399934] pci 0000:08:08.0: PME# disabled Sep 29 22:08:43 BrianLinux kernel: [ 0.399986] pci 0000:00:1e.0: transparent bridge Sep 29 22:08:43 BrianLinux kernel: [ 0.399992] pci 0000:00:1e.0: bridge io port: [0x2000-0x2fff] Sep 29 22:08:43 BrianLinux kernel: [ 0.399997] pci 0000:00:1e.0: bridge 32bit mmio: [0xd0100000-0xd01fffff] Sep 29 22:08:43 BrianLinux kernel: [ 0.400031] pci_bus 0000:00: on NUMA node 0 Sep 29 22:08:43 BrianLinux kernel: [ 0.400037] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] Sep 29 22:08:43 BrianLinux kernel: [ 0.400316] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT] Sep 29 22:08:43 BrianLinux kernel: [ 0.400412] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT] Sep 29 22:08:43 BrianLinux kernel: [ 0.400529] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT] Sep 29 22:08:43 BrianLinux kernel: [ 0.403664] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 14 15) *11 Sep 29 22:08:43 BrianLinux kernel: [ 0.403788] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 *4 5 6 7 11 12 14 15) Sep 29 22:08:43 BrianLinux kernel: [ 0.403909] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 *3 4 5 6 7 10 12 14 15) Sep 29 22:08:43 BrianLinux kernel: [ 0.404044] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *10 Sep 29 22:08:43 BrianLinux kernel: [ 0.404165] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled. Sep 29 22:08:43 BrianLinux kernel: [ 0.404286] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled. Sep 29 22:08:43 BrianLinux kernel: [ 0.404408] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 *7 10 12 14 15) Sep 29 22:08:43 BrianLinux kernel: [ 0.404528] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 *5 6 7 11 12 14 15) Sep 29 22:08:43 BrianLinux kernel: [ 0.404756] SCSI subsystem initialized Sep 29 22:08:43 BrianLinux kernel: [ 0.404816] libata version 3.00 loaded. Sep 29 22:08:43 BrianLinux kernel: [ 0.404906] usbcore: registered new interface driver usbfs Sep 29 22:08:43 BrianLinux kernel: [ 0.404929] usbcore: registered new interface driver hub Sep 29 22:08:43 BrianLinux kernel: [ 0.404960] usbcore: registered new device driver usb Sep 29 22:08:43 BrianLinux kernel: [ 0.405147] ACPI: WMI: Mapper loaded Sep 29 22:08:43 BrianLinux kernel: [ 0.405150] PCI: Using ACPI for IRQ routing Sep 29 22:08:43 BrianLinux kernel: [ 0.405155] pci 0000:00:1c.0: BAR 13: can't allocate resource Sep 29 22:08:43 BrianLinux kernel: [ 0.405158] pci 0000:00:1c.0: BAR 14: can't allocate resource Sep 29 22:08:43 BrianLinux kernel: [ 0.405161] pci 0000:00:1c.2: BAR 13: can't allocate resource Sep 29 22:08:43 BrianLinux kernel: [ 0.405164] pci 0000:00:1c.2: BAR 14: can't allocate resource Sep 29 22:08:43 BrianLinux kernel: [ 0.405207] pci 0000:06:00.0: BAR 0: no parent found for of device [0xd0000000-0xd0003fff] Sep 29 22:08:43 BrianLinux kernel: [ 0.405265] pci 0000:06:00.0: BAR 0: can't allocate resource Sep 29 22:08:43 BrianLinux kernel: [ 0.405414] Bluetooth: Core ver 2.15 Sep 29 22:08:43 BrianLinux kernel: [ 0.405447] NET: Registered protocol family 31 Sep 29 22:08:43 BrianLinux kernel: [ 0.405450] Bluetooth: HCI device and connection manager initialized Sep 29 22:08:43 BrianLinux kernel: [ 0.405454] Bluetooth: HCI socket layer initialized Sep 29 22:08:43 BrianLinux kernel: [ 0.405456] NetLabel: Initializing Sep 29 22:08:43 BrianLinux kernel: [ 0.405458] NetLabel: domain hash size = 128 Sep 29 22:08:43 BrianLinux kernel: [ 0.405461] NetLabel: protocols = UNLABELED CIPSOv4 Sep 29 22:08:43 BrianLinux kernel: [ 0.405479] NetLabel: unlabeled traffic allowed by default Sep 29 22:08:43 BrianLinux kernel: [ 0.405524] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 Sep 29 22:08:43 BrianLinux kernel: [ 0.405530] hpet0: 3 comparators, 64-bit 14.318180 MHz counter Sep 29 22:08:43 BrianLinux kernel: [ 0.409984] pnp: PnP ACPI init Sep 29 22:08:43 BrianLinux kernel: [ 0.410010] ACPI: bus type pnp registered Sep 29 22:08:43 BrianLinux kernel: [ 0.484587] pnp: PnP ACPI: found 10 devices Sep 29 22:08:43 BrianLinux kernel: [ 0.484590] ACPI: ACPI bus type pnp unregistered Sep 29 22:08:43 BrianLinux kernel: [ 0.484595] PnPBIOS: Disabled by ACPI PNP Sep 29 22:08:43 BrianLinux kernel: [ 0.484612] system 00:01: iomem range 0xe0000000-0xefffffff has been reserved Sep 29 22:08:43 BrianLinux kernel: [ 0.484616] system 00:01: iomem range 0xfed14000-0xfed17fff has been reserved Sep 29 22:08:43 BrianLinux kernel: [ 0.484620] system 00:01: iomem range 0xfed18000-0xfed18fff has been reserved Sep 29 22:08:43 BrianLinux kernel: [ 0.484624] system 00:01: iomem range 0xfed19000-0xfed19fff has been reserved Sep 29 22:08:43 BrianLinux kernel: [ 0.484628] system 00:01: iomem range 0xfed1c000-0xfed1ffff has been reserved Sep 29 22:08:43 BrianLinux kernel: [ 0.484632] system 00:01: iomem range 0xfed20000-0xfed3ffff has been reserved Sep 29 22:08:43 BrianLinux kernel: [ 0.484636] system 00:01: iomem range 0xfed40000-0xfed44fff has been reserved Sep 29 22:08:43 BrianLinux kernel: [ 0.484640] system 00:01: iomem range 0xfed45000-0xfed8ffff has been reserved Sep 29 22:08:43 BrianLinux kernel: [ 0.484654] system 00:04: iomem range 0xfed00000-0xfed003ff has been reserved Sep 29 22:08:43 BrianLinux kernel: [ 0.484662] system 00:06: ioport range 0x800-0x80f has been reserved Sep 29 22:08:43 BrianLinux kernel: [ 0.484666] system 00:06: ioport range 0x1000-0x107f has been reserved Sep 29 22:08:43 BrianLinux kernel: [ 0.484670] system 00:06: ioport range 0x1180-0x11bf has been reserved Sep 29 22:08:43 BrianLinux kernel: [ 0.484674] system 00:06: ioport range 0x1640-0x164f has been reserved Sep 29 22:08:43 BrianLinux kernel: [ 0.504010] Switched to high resolution mode on CPU 0 Sep 29 22:08:43 BrianLinux kernel: [ 0.519384] AppArmor: AppArmor Filesystem Enabled Sep 29 22:08:43 BrianLinux kernel: [ 0.519444] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:01 Sep 29 22:08:43 BrianLinux kernel: [ 0.519447] pci 0000:00:1c.0: IO window: disabled Sep 29 22:08:43 BrianLinux kernel: [ 0.519454] pci 0000:00:1c.0: MEM window: disabled Sep 29 22:08:43 BrianLinux kernel: [ 0.519460] pci 0000:00:1c.0: PREFETCH window: disabled Sep 29 22:08:43 BrianLinux kernel: [ 0.519480] pci 0000:00:1c.2: PCI bridge, secondary bus 0000:06 Sep 29 22:08:43 BrianLinux kernel: [ 0.519482] pci 0000:00:1c.2: IO window: disabled Sep 29 22:08:43 BrianLinux kernel: [ 0.519490] pci 0000:00:1c.2: MEM window: 0x80000000-0x800fffff Sep 29 22:08:43 BrianLinux kernel: [ 0.519496] pci 0000:00:1c.2: PREFETCH window: disabled Sep 29 22:08:43 BrianLinux kernel: [ 0.519502] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:08 Sep 29 22:08:43 BrianLinux kernel: [ 0.519506] pci 0000:00:1e.0: IO window: 0x2000-0x2fff Sep 29 22:08:43 BrianLinux kernel: [ 0.519514] pci 0000:00:1e.0: MEM window: 0xd0100000-0xd01fffff Sep 29 22:08:43 BrianLinux kernel: [ 0.519519] pci 0000:00:1e.0: PREFETCH window: disabled Sep 29 22:08:43 BrianLinux kernel: [ 0.519537] alloc irq_desc for 17 on node -1 Sep 29 22:08:43 BrianLinux kernel: [ 0.519540] alloc kstat_irqs on node -1 Sep 29 22:08:43 BrianLinux kernel: [ 0.519547] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 Sep 29 22:08:43 BrianLinux kernel: [ 0.519556] pci 0000:00:1c.0: setting latency timer to 64 Sep 29 22:08:43 BrianLinux kernel: [ 0.519566] pci 0000:00:1c.2: enabling device (0100 -> 0102) Sep 29 22:08:43 BrianLinux kernel: [ 0.519571] alloc irq_desc for 18 on node -1 Sep 29 22:08:43 BrianLinux kernel: [ 0.519573] alloc kstat_irqs on node -1 Sep 29 22:08:43 BrianLinux kernel: [ 0.519577] pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 Sep 29 22:08:43 BrianLinux kernel: [ 0.519585] pci 0000:00:1c.2: setting latency timer to 64 Sep 29 22:08:43 BrianLinux kernel: [ 0.519595] pci 0000:00:1e.0: setting latency timer to 64 Sep 29 22:08:43 BrianLinux kernel: [ 0.519601] pci_bus 0000:00: resource 0 io: [0x00-0xffff] Sep 29 22:08:43 BrianLinux kernel: [ 0.519605] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff] Sep 29 22:08:43 BrianLinux kernel: [ 0.519608] pci_bus 0000:01: resource 0 mem: [0x0-0xfff] Sep 29 22:08:43 BrianLinux kernel: [ 0.519612] pci_bus 0000:01: resource 1 mem: [0x0-0xfffff] Sep 29 22:08:43 BrianLinux kernel: [ 0.519615] pci_bus 0000:06: resource 0 mem: [0x0-0xfff] Sep 29 22:08:43 BrianLinux kernel: [ 0.519618] pci_bus 0000:06: resource 1 mem: [0x80000000-0x800fffff] Sep 29 22:08:43 BrianLinux kernel: [ 0.519622] pci_bus 0000:08: resource 0 io: [0x2000-0x2fff] Sep 29 22:08:43 BrianLinux kernel: [ 0.519626] pci_bus 0000:08: resource 1 mem: [0xd0100000-0xd01fffff] Sep 29 22:08:43 BrianLinux kernel: [ 0.519629] pci_bus 0000:08: resource 3 io: [0x00-0xffff] Sep 29 22:08:43 BrianLinux kernel: [ 0.519633] pci_bus 0000:08: resource 4 mem: [0x000000-0xffffffff] Sep 29 22:08:43 BrianLinux kernel: [ 0.519679] NET: Registered protocol family 2 Sep 29 22:08:43 BrianLinux kernel: [ 0.519789] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) Sep 29 22:08:43 BrianLinux kernel: [ 0.520175] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) Sep 29 22:08:43 BrianLinux kernel: [ 0.521083] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) Sep 29 22:08:43 BrianLinux kernel: [ 0.521591] TCP: Hash tables configured (established 131072 bind 65536) Sep 29 22:08:43 BrianLinux kernel: [ 0.521596] TCP reno registered Sep 29 22:08:43 BrianLinux kernel: [ 0.521729] NET: Registered protocol family 1 Sep 29 22:08:43 BrianLinux kernel: [ 0.521809] Trying to unpack rootfs image as initramfs... Sep 29 22:08:43 BrianLinux kernel: [ 0.745881] Freeing initrd memory: 6634k freed Sep 29 22:08:43 BrianLinux kernel: [ 0.750517] Simple Boot Flag at 0x36 set to 0x1 Sep 29 22:08:43 BrianLinux kernel: [ 0.750623] cpufreq-nforce2: No nForce2 chipset. Sep 29 22:08:43 BrianLinux kernel: [ 0.750668] Scanning for low memory corruption every 60 seconds Sep 29 22:08:43 BrianLinux kernel: [ 0.750853] audit: initializing netlink socket (disabled) Sep 29 22:08:43 BrianLinux kernel: [ 0.750875] type=2000 audit(1254262112.748:1): initialized Sep 29 22:08:43 BrianLinux kernel: [ 0.761778] highmem bounce pool size: 64 pages Sep 29 22:08:43 BrianLinux kernel: [ 0.761786] HugeTLB registered 4 MB page size, pre-allocated 0 pages Sep 29 22:08:43 BrianLinux kernel: [ 0.763552] VFS: Disk quotas dquot_6.5.2 Sep 29 22:08:43 BrianLinux kernel: [ 0.763625] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) Sep 29 22:08:43 BrianLinux kernel: [ 0.764320] fuse init (API version 7.12) Sep 29 22:08:43 BrianLinux kernel: [ 0.764422] msgmni has been set to 1706 Sep 29 22:08:43 BrianLinux kernel: [ 0.764660] alg: No test for stdrng (krng) Sep 29 22:08:43 BrianLinux kernel: [ 0.764675] io scheduler noop registered Sep 29 22:08:43 BrianLinux kernel: [ 0.764678] io scheduler anticipatory registered Sep 29 22:08:43 BrianLinux kernel: [ 0.764682] io scheduler deadline registered (default) Sep 29 22:08:43 BrianLinux kernel: [ 0.764735] io scheduler cfq registered Sep 29 22:08:43 BrianLinux kernel: [ 0.764750] pci 0000:00:02.0: Boot video device Sep 29 22:08:43 BrianLinux kernel: [ 2.364010] pci 0000:00:1d.7: EHCI: BIOS handoff failed (BIOS bug?) 01010001 Sep 29 22:08:43 BrianLinux kernel: [ 2.364282] alloc irq_desc for 24 on node -1 Sep 29 22:08:43 BrianLinux kernel: [ 2.364286] alloc kstat_irqs on node -1 Sep 29 22:08:43 BrianLinux kernel: [ 2.364300] pcieport-driver 0000:00:1c.0: irq 24 for MSI/MSI-X Sep 29 22:08:43 BrianLinux kernel: [ 2.364313] pcieport-driver 0000:00:1c.0: setting latency timer to 64 Sep 29 22:08:43 BrianLinux kernel: [ 2.364484] alloc irq_desc for 25 on node -1 Sep 29 22:08:43 BrianLinux kernel: [ 2.364487] alloc kstat_irqs on node -1 Sep 29 22:08:43 BrianLinux kernel: [ 2.364497] pcieport-driver 0000:00:1c.2: irq 25 for MSI/MSI-X Sep 29 22:08:43 BrianLinux kernel: [ 2.364509] pcieport-driver 0000:00:1c.2: setting latency timer to 64 Sep 29 22:08:43 BrianLinux kernel: [ 2.364629] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 Sep 29 22:08:43 BrianLinux kernel: [ 2.364719] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 Sep 29 22:08:43 BrianLinux kernel: [ 2.420068] ACPI: AC Adapter [ACAD] (off-line) Sep 29 22:08:43 BrianLinux kernel: [ 2.420160] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0 Sep 29 22:08:43 BrianLinux kernel: [ 2.420165] ACPI: Power Button [PWRF] Sep 29 22:08:43 BrianLinux kernel: [ 2.420225] input: Sleep Button as /devices/LNXSYSTM:00/LNXSLPBN:00/input/input1 Sep 29 22:08:43 BrianLinux kernel: [ 2.420228] ACPI: Sleep Button [SLPF] Sep 29 22:08:43 BrianLinux kernel: [ 2.420238] ACPI Error: Could not enable SleepButton event 20090521 evxfevnt-193 Sep 29 22:08:43 BrianLinux kernel: [ 2.420244] ACPI Warning: Could not enable fixed event 3 20090521 evxface-146 Sep 29 22:08:43 BrianLinux kernel: [ 2.420294] button: probe of LNXSLPBN:00 failed with error -22 Sep 29 22:08:43 BrianLinux kernel: [ 2.420344] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input2 Sep 29 22:08:43 BrianLinux kernel: [ 2.420387] ACPI: Lid Switch [LID] Sep 29 22:08:43 BrianLinux kernel: [ 2.420443] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input3 Sep 29 22:08:43 BrianLinux kernel: [ 2.420447] ACPI: Power Button [PWRB] Sep 29 22:08:43 BrianLinux kernel: [ 2.421239] Marking TSC unstable due to TSC halts in idle Sep 29 22:08:43 BrianLinux kernel: [ 2.421264] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3]) Sep 29 22:08:43 BrianLinux kernel: [ 2.421294] processor LNXCPU:00: registered as cooling_device0 Sep 29 22:08:43 BrianLinux kernel: [ 2.421299] ACPI: Processor [CPU0] (supports 8 throttling states) Sep 29 22:08:43 BrianLinux kernel: [ 2.680083] thermal LNXTHERM:01: registered as thermal_zone0 Sep 29 22:08:43 BrianLinux kernel: [ 2.680092] ACPI: Thermal Zone [TZ01] (60 C) Sep 29 22:08:43 BrianLinux kernel: [ 2.680256] thermal LNXTHERM:02: registered as thermal_zone1 Sep 29 22:08:43 BrianLinux kernel: [ 2.680266] ACPI: Thermal Zone [TZ02] (27 C) Sep 29 22:08:43 BrianLinux kernel: [ 2.680442] isapnp: Scanning for PnP cards... Sep 29 22:08:43 BrianLinux kernel: [ 3.034663] isapnp: No Plug & Play device found Sep 29 22:08:43 BrianLinux kernel: [ 3.288173] ACPI: Battery Slot [BAT1] (battery present) Sep 29 22:08:43 BrianLinux kernel: [ 3.288433] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled Sep 29 22:08:43 BrianLinux kernel: [ 3.289979] brd: module loaded Sep 29 22:08:43 BrianLinux kernel: [ 3.290526] loop: module loaded Sep 29 22:08:43 BrianLinux kernel: [ 3.290616] input: Macintosh mouse button emulation as /devices/virtual/input/input4 Sep 29 22:08:43 BrianLinux kernel: [ 3.290704] ahci 0000:00:1f.2: version 3.0 Sep 29 22:08:43 BrianLinux kernel: [ 3.290723] alloc irq_desc for 19 on node -1 Sep 29 22:08:43 BrianLinux kernel: [ 3.290726] alloc kstat_irqs on node -1 Sep 29 22:08:43 BrianLinux kernel: [ 3.290735] ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19 Sep 29 22:08:43 BrianLinux kernel: [ 3.290777] alloc irq_desc for 26 on node -1 Sep 29 22:08:43 BrianLinux kernel: [ 3.290780] alloc kstat_irqs on node -1 Sep 29 22:08:43 BrianLinux kernel: [ 3.290792] ahci 0000:00:1f.2: irq 26 for MSI/MSI-X Sep 29 22:08:43 BrianLinux kernel: [ 3.290878] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 4 ports 1.5 Gbps 0x1 impl SATA mode Sep 29 22:08:43 BrianLinux kernel: [ 3.290883] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part Sep 29 22:08:43 BrianLinux kernel: [ 3.290889] ahci 0000:00:1f.2: setting latency timer to 64 Sep 29 22:08:43 BrianLinux kernel: [ 3.291035] scsi0 : ahci Sep 29 22:08:43 BrianLinux kernel: [ 3.291157] scsi1 : ahci Sep 29 22:08:43 BrianLinux kernel: [ 3.291216] scsi2 : ahci Sep 29 22:08:43 BrianLinux kernel: [ 3.291278] scsi3 : ahci Sep 29 22:08:43 BrianLinux kernel: [ 3.291407] ata1: SATA max UDMA/133 abar m1024@0xd0544400 port 0xd0544500 irq 26 Sep 29 22:08:43 BrianLinux kernel: [ 3.291411] ata2: DUMMY Sep 29 22:08:43 BrianLinux kernel: [ 3.291413] ata3: DUMMY Sep 29 22:08:43 BrianLinux kernel: [ 3.291415] ata4: DUMMY Sep 29 22:08:43 BrianLinux kernel: [ 3.291505] ata_piix 0000:00:1f.1: version 2.13 Sep 29 22:08:43 BrianLinux kernel: [ 3.291519] ata_piix 0000:00:1f.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 Sep 29 22:08:43 BrianLinux kernel: [ 3.291562] ata_piix 0000:00:1f.1: setting latency timer to 64 Sep 29 22:08:43 BrianLinux kernel: [ 3.291668] scsi4 : ata_piix Sep 29 22:08:43 BrianLinux kernel: [ 3.291756] scsi5 : ata_piix Sep 29 22:08:43 BrianLinux kernel: [ 3.292443] ata5: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x1810 irq 14 Sep 29 22:08:43 BrianLinux kernel: [ 3.292447] ata6: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x1818 irq 15 Sep 29 22:08:43 BrianLinux kernel: [ 3.293405] Fixed MDIO Bus: probed Sep 29 22:08:43 BrianLinux kernel: [ 3.293448] PPP generic driver version 2.4.2 Sep 29 22:08:43 BrianLinux kernel: [ 3.293574] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver Sep 29 22:08:43 BrianLinux kernel: [ 3.293599] alloc irq_desc for 23 on node -1 Sep 29 22:08:43 BrianLinux kernel: [ 3.293602] alloc kstat_irqs on node -1 Sep 29 22:08:43 BrianLinux kernel: [ 3.293610] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23 Sep 29 22:08:43 BrianLinux kernel: [ 3.293627] ehci_hcd 0000:00:1d.7: setting latency timer to 64 Sep 29 22:08:43 BrianLinux kernel: [ 3.293631] ehci_hcd 0000:00:1d.7: EHCI Host Controller Sep 29 22:08:43 BrianLinux kernel: [ 3.293699] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1 Sep 29 22:08:43 BrianLinux kernel: [ 3.297631] ehci_hcd 0000:00:1d.7: debug port 1 Sep 29 22:08:43 BrianLinux kernel: [ 3.297639] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported Sep 29 22:08:43 BrianLinux kernel: [ 3.297670] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xd0544000 Sep 29 22:08:43 BrianLinux kernel: [ 3.301805] ata6: port disabled. ignoring. Sep 29 22:08:43 BrianLinux kernel: [ 3.312017] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 Sep 29 22:08:43 BrianLinux kernel: [ 3.312115] usb usb1: configuration #1 chosen from 1 choice Sep 29 22:08:43 BrianLinux kernel: [ 3.312151] hub 1-0:1.0: USB hub found Sep 29 22:08:43 BrianLinux kernel: [ 3.312162] hub 1-0:1.0: 6 ports detected Sep 29 22:08:43 BrianLinux kernel: [ 3.312236] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver Sep 29 22:08:43 BrianLinux kernel: [ 3.312257] uhci_hcd: USB Universal Host Controller Interface driver Sep 29 22:08:43 BrianLinux kernel: [ 3.312308] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 Sep 29 22:08:43 BrianLinux kernel: [ 3.312317] uhci_hcd 0000:00:1d.0: setting latency timer to 64 Sep 29 22:08:43 BrianLinux kernel: [ 3.312322] uhci_hcd 0000:00:1d.0: UHCI Host Controller Sep 29 22:08:43 BrianLinux kernel: [ 3.312362] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 Sep 29 22:08:43 BrianLinux kernel: [ 3.312392] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001820 Sep 29 22:08:43 BrianLinux kernel: [ 3.312485] usb usb2: configuration #1 chosen from 1 choice Sep 29 22:08:43 BrianLinux kernel: [ 3.312521] hub 2-0:1.0: USB hub found Sep 29 22:08:43 BrianLinux kernel: [ 3.312530] hub 2-0:1.0: 2 ports detected Sep 29 22:08:43 BrianLinux kernel: [ 3.312593] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 Sep 29 22:08:43 BrianLinux kernel: [ 3.312601] uhci_hcd 0000:00:1d.1: setting latency timer to 64 Sep 29 22:08:43 BrianLinux kernel: [ 3.312605] uhci_hcd 0000:00:1d.1: UHCI Host Controller Sep 29 22:08:43 BrianLinux kernel: [ 3.312639] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 Sep 29 22:08:43 BrianLinux kernel: [ 3.312679] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00001840 Sep 29 22:08:43 BrianLinux kernel: [ 3.312767] usb usb3: configuration #1 chosen from 1 choice Sep 29 22:08:43 BrianLinux kernel: [ 3.312797] hub 3-0:1.0: USB hub found Sep 29 22:08:43 BrianLinux kernel: [ 3.312805] hub 3-0:1.0: 2 ports detected Sep 29 22:08:43 BrianLinux kernel: [ 3.312862] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 Sep 29 22:08:43 BrianLinux kernel: [ 3.312869] uhci_hcd 0000:00:1d.2: setting latency timer to 64 Sep 29 22:08:43 BrianLinux kernel: [ 3.312875] uhci_hcd 0000:00:1d.2: UHCI Host Controller Sep 29 22:08:43 BrianLinux kernel: [ 3.312909] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 Sep 29 22:08:43 BrianLinux kernel: [ 3.312947] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001860 Sep 29 22:08:43 BrianLinux kernel: [ 3.313043] usb usb4: configuration #1 chosen from 1 choice Sep 29 22:08:43 BrianLinux kernel: [ 3.313074] hub 4-0:1.0: USB hub found Sep 29 22:08:43 BrianLinux kernel: [ 3.313081] hub 4-0:1.0: 2 ports detected Sep 29 22:08:43 BrianLinux kernel: [ 3.313200] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 Sep 29 22:08:43 BrianLinux kernel: [ 3.332168] i8042.c: Detected active multiplexing controller, rev 1.1. Sep 29 22:08:43 BrianLinux kernel: [ 3.347956] serio: i8042 KBD port at 0x60,0x64 irq 1 Sep 29 22:08:43 BrianLinux kernel: [ 3.347963] serio: i8042 AUX0 port at 0x60,0x64 irq 12 Sep 29 22:08:43 BrianLinux kernel: [ 3.347996] serio: i8042 AUX1 port at 0x60,0x64 irq 12 Sep 29 22:08:43 BrianLinux kernel: [ 3.348038] serio: i8042 AUX2 port at 0x60,0x64 irq 12 Sep 29 22:08:43 BrianLinux kernel: [ 3.348064] serio: i8042 AUX3 port at 0x60,0x64 irq 12 Sep 29 22:08:43 BrianLinux kernel: [ 3.348171] mice: PS/2 mouse device common for all mice Sep 29 22:08:43 BrianLinux kernel: [ 3.349255] rtc_cmos 00:09: RTC can wake from S4 Sep 29 22:08:43 BrianLinux kernel: [ 3.349297] rtc_cmos 00:09: rtc core: registered rtc_cmos as rtc0 Sep 29 22:08:43 BrianLinux kernel: [ 3.349333] rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs Sep 29 22:08:43 BrianLinux kernel: [ 3.349463] device-mapper: uevent: version 1.0.3 Sep 29 22:08:43 BrianLinux kernel: [ 3.349572] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com Sep 29 22:08:43 BrianLinux kernel: [ 3.349632] device-mapper: multipath: version 1.1.0 loaded Sep 29 22:08:43 BrianLinux kernel: [ 3.349636] device-mapper: multipath round-robin: version 1.0.0 loaded Sep 29 22:08:43 BrianLinux kernel: [ 3.349782] EISA: Probing bus 0 at eisa.0 Sep 29 22:08:43 BrianLinux kernel: [ 3.349790] Cannot allocate resource for EISA slot 1 Sep 29 22:08:43 BrianLinux kernel: [ 3.349794] Cannot allocate resource for EISA slot 2 Sep 29 22:08:43 BrianLinux kernel: [ 3.349821] EISA: Detected 0 cards. Sep 29 22:08:43 BrianLinux kernel: [ 3.349918] cpuidle: using governor ladder Sep 29 22:08:43 BrianLinux kernel: [ 3.349991] cpuidle: using governor menu Sep 29 22:08:43 BrianLinux kernel: [ 3.350557] TCP cubic registered Sep 29 22:08:43 BrianLinux kernel: [ 3.350752] NET: Registered protocol family 10 Sep 29 22:08:43 BrianLinux kernel: [ 3.351250] lo: Disabled Privacy Extensions Sep 29 22:08:43 BrianLinux kernel: [ 3.351603] NET: Registered protocol family 17 Sep 29 22:08:43 BrianLinux kernel: [ 3.351623] Bluetooth: L2CAP ver 2.13 Sep 29 22:08:43 BrianLinux kernel: [ 3.351626] Bluetooth: L2CAP socket layer initialized Sep 29 22:08:43 BrianLinux kernel: [ 3.351629] Bluetooth: SCO (Voice Link) ver 0.6 Sep 29 22:08:43 BrianLinux kernel: [ 3.351631] Bluetooth: SCO socket layer initialized Sep 29 22:08:43 BrianLinux kernel: [ 3.351667] Bluetooth: RFCOMM TTY layer initialized Sep 29 22:08:43 BrianLinux kernel: [ 3.351670] Bluetooth: RFCOMM socket layer initialized Sep 29 22:08:43 BrianLinux kernel: [ 3.351673] Bluetooth: RFCOMM ver 1.11 Sep 29 22:08:43 BrianLinux kernel: [ 3.351697] Using IPI No-Shortcut mode Sep 29 22:08:43 BrianLinux kernel: [ 3.351779] PM: Resume from disk failed. Sep 29 22:08:43 BrianLinux kernel: [ 3.351802] registered taskstats version 1 Sep 29 22:08:43 BrianLinux kernel: [ 3.351930] Magic number: 9:597:149 Sep 29 22:08:43 BrianLinux kernel: [ 3.351955] bdi 1:1: hash matches Sep 29 22:08:43 BrianLinux kernel: [ 3.352077] rtc_cmos 00:09: setting system clock to 2009-09-29 22:08:35 UTC (1254262115) Sep 29 22:08:43 BrianLinux kernel: [ 3.352082] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found Sep 29 22:08:43 BrianLinux kernel: [ 3.352084] EDD information not available. Sep 29 22:08:43 BrianLinux kernel: [ 3.364574] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input5 Sep 29 22:08:43 BrianLinux kernel: [ 3.480449] ata5.00: ATAPI: TSSTcorpCDW/DVD TS-L462D, HS00, max MWDMA2 Sep 29 22:08:43 BrianLinux kernel: [ 3.500041] Clocksource tsc unstable (delta = -89589310 ns) Sep 29 22:08:43 BrianLinux kernel: [ 3.528350] ata5.00: configured for MWDMA2 Sep 29 22:08:43 BrianLinux kernel: [ 3.608066] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) Sep 29 22:08:43 BrianLinux kernel: [ 3.609712] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 filtered out Sep 29 22:08:43 BrianLinux kernel: [ 3.656151] ata1.00: ATA-8: WDC WD3200BEVT-22ZCT0, 11.01A11, max UDMA/133 Sep 29 22:08:43 BrianLinux kernel: [ 3.656155] ata1.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32) Sep 29 22:08:43 BrianLinux kernel: [ 3.658721] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 filtered out Sep 29 22:08:43 BrianLinux kernel: [ 3.658895] ata1.00: configured for UDMA/133 Sep 29 22:08:43 BrianLinux kernel: [ 3.672179] scsi 0:0:0:0: Direct-Access ATA WDC WD3200BEVT-2 11.0 PQ: 0 ANSI: 5 Sep 29 22:08:43 BrianLinux kernel: [ 3.672349] sd 0:0:0:0: Attached scsi generic sg0 type 0 Sep 29 22:08:43 BrianLinux kernel: [ 3.672397] sd 0:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB) Sep 29 22:08:43 BrianLinux kernel: [ 3.672456] sd 0:0:0:0: [sda] Write Protect is off Sep 29 22:08:43 BrianLinux kernel: [ 3.672460] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 Sep 29 22:08:43 BrianLinux kernel: [ 3.672490] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA Sep 29 22:08:43 BrianLinux kernel: [ 3.672642] sda: sda1 sda2 sda3 < Sep 29 22:08:43 BrianLinux kernel: [ 3.706144] scsi 4:0:0:0: CD-ROM TSSTcorp CDW/DVD TS-L462D HS00 PQ: 0 ANSI: 5 Sep 29 22:08:43 BrianLinux kernel: [ 3.706782] sda5 > sda4 Sep 29 22:08:43 BrianLinux kernel: [ 3.732729] sd 0:0:0:0: [sda] Attached SCSI disk Sep 29 22:08:43 BrianLinux kernel: [ 3.801396] sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray Sep 29 22:08:43 BrianLinux kernel: [ 3.801400] Uniform CD-ROM driver Revision: 3.20 Sep 29 22:08:43 BrianLinux kernel: [ 3.801483] sr 4:0:0:0: Attached scsi CD-ROM sr0 Sep 29 22:08:43 BrianLinux kernel: [ 3.801537] sr 4:0:0:0: Attached scsi generic sg1 type 5 Sep 29 22:08:43 BrianLinux kernel: [ 3.801566] Freeing unused kernel memory: 540k freed Sep 29 22:08:43 BrianLinux kernel: [ 3.801907] Write protecting the kernel text: 4544k Sep 29 22:08:43 BrianLinux kernel: [ 3.801952] Write protecting the kernel read-only data: 1828k Sep 29 22:08:43 BrianLinux kernel: [ 4.217442] <6>8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004) Sep 29 22:08:43 BrianLinux kernel: [ 4.217479] 8139cp 0000:08:08.0: This (id 10ec:8139 rev 10) is not an 8139C+ compatible chip, use 8139too Sep 29 22:08:43 BrianLinux kernel: [ 4.221269] 8139too Fast Ethernet driver 0.9.28 Sep 29 22:08:43 BrianLinux kernel: [ 4.221306] 8139too 0000:08:08.0: enabling device (0105 -> 0107) Sep 29 22:08:43 BrianLinux kernel: [ 4.221316] alloc irq_desc for 16 on node -1 Sep 29 22:08:43 BrianLinux kernel: [ 4.221319] alloc kstat_irqs on node -1 Sep 29 22:08:43 BrianLinux kernel: [ 4.221330] 8139too 0000:08:08.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 Sep 29 22:08:43 BrianLinux kernel: [ 4.222746] eth0: RealTek RTL8139 at 0x2000, 00:16:d4:45:6a:b6, IRQ 16 Sep 29 22:08:43 BrianLinux kernel: [ 4.731190] PM: Starting manual resume from disk Sep 29 22:08:43 BrianLinux kernel: [ 4.731195] PM: Resume from partition 8:4 Sep 29 22:08:43 BrianLinux kernel: [ 4.731197] PM: Checking hibernation image. Sep 29 22:08:43 BrianLinux kernel: [ 4.731371] PM: Resume from disk failed. Sep 29 22:08:43 BrianLinux kernel: [ 4.771011] EXT4-fs (sda1): barriers enabled Sep 29 22:08:43 BrianLinux kernel: [ 4.787922] kjournald2 starting: pid 287, dev sda1:8, commit interval 5 seconds Sep 29 22:08:43 BrianLinux kernel: [ 4.787938] EXT4-fs (sda1): delayed allocation enabled Sep 29 22:08:43 BrianLinux kernel: [ 4.787942] EXT4-fs: file extents enabled Sep 29 22:08:43 BrianLinux kernel: [ 4.792171] EXT4-fs: mballoc enabled Sep 29 22:08:43 BrianLinux kernel: [ 4.792190] EXT4-fs (sda1): mounted filesystem with ordered data mode Sep 29 22:08:43 BrianLinux kernel: [ 5.634822] type=1505 audit(1254262117.782:2): operation="profile_load" pid=307 name=/usr/sbin/tcpdump Sep 29 22:08:43 BrianLinux kernel: [ 5.637932] type=1505 audit(1254262117.783:3): operation="profile_load" pid=308 name=/sbin/dhclient3 Sep 29 22:08:43 BrianLinux kernel: [ 5.638722] type=1505 audit(1254262117.783:4): operation="profile_load" pid=308 name=/usr/lib/NetworkManager/nm-dhcp-client.action Sep 29 22:08:43 BrianLinux kernel: [ 5.639167] type=1505 audit(1254262117.783:5): operation="profile_load" pid=308 name=/usr/lib/connman/scripts/dhclient-script Sep 29 22:08:43 BrianLinux kernel: [ 5.641370] type=1505 audit(1254262117.787:6): operation="profile_load" pid=309 name=/usr/sbin/mysqld-akonadi Sep 29 22:08:43 BrianLinux kernel: [ 5.666009] type=1505 audit(1254262117.811:7): operation="profile_load" pid=311 name=/usr/lib/cups/backend/cups-pdf Sep 29 22:08:43 BrianLinux kernel: [ 5.666974] type=1505 audit(1254262117.811:8): operation="profile_load" pid=311 name=/usr/sbin/cupsd Sep 29 22:08:43 BrianLinux kernel: [ 7.050462] udev: starting version 147 Sep 29 22:08:43 BrianLinux kernel: [ 7.456837] intel_rng: FWH not detected Sep 29 22:08:43 BrianLinux kernel: [ 7.456978] Linux agpgart interface v0.103 Sep 29 22:08:43 BrianLinux kernel: [ 7.489352] agpgart-intel 0000:00:00.0: Intel 945GM Chipset Sep 29 22:08:43 BrianLinux kernel: [ 7.489673] agpgart-intel 0000:00:00.0: detected 7932K stolen memory Sep 29 22:08:43 BrianLinux kernel: [ 7.494698] lib80211: common routines for IEEE802.11 drivers Sep 29 22:08:43 BrianLinux kernel: [ 7.494703] lib80211_crypt: registered algorithm 'NULL' Sep 29 22:08:43 BrianLinux kernel: [ 7.495220] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xc0000000 Sep 29 22:08:43 BrianLinux kernel: [ 7.590696] wl: module license 'MIXED/Proprietary' taints kernel. Sep 29 22:08:43 BrianLinux kernel: [ 7.590703] Disabling lock debugging due to kernel taint Sep 29 22:08:43 BrianLinux kernel: [ 7.594776] wl 0000:06:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 Sep 29 22:08:43 BrianLinux kernel: [ 7.594795] wl 0000:06:00.0: setting latency timer to 64 Sep 29 22:08:43 BrianLinux kernel: [ 7.696810] lp: driver loaded but no devices found Sep 29 22:08:43 BrianLinux kernel: [ 7.758660] lib80211_crypt: registered algorithm 'TKIP' Sep 29 22:08:43 BrianLinux kernel: [ 7.758829] eth1: Broadcom BCM4311 802.11 Wireless Controller 5.10.91.9 Sep 29 22:08:43 BrianLinux kernel: [ 7.976168] acpi device:07: registered as cooling_device1 Sep 29 22:08:43 BrianLinux kernel: [ 7.976340] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:06/input/input6 Sep 29 22:08:43 BrianLinux kernel: [ 7.976395] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) Sep 29 22:08:43 BrianLinux kernel: [ 8.218172] [drm] Initialized drm 1.1.0 20060810 Sep 29 22:08:43 BrianLinux kernel: [ 8.291250] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 Sep 29 22:08:43 BrianLinux kernel: [ 8.291258] i915 0000:00:02.0: setting latency timer to 64 Sep 29 22:08:43 BrianLinux kernel: [ 8.421202] ip_tables: (C) 2000-2006 Netfilter Core Team Sep 29 22:08:43 BrianLinux kernel: [ 8.843933] [drm] TV-14: set mode NTSC 480i 0 Sep 29 22:08:43 BrianLinux kernel: [ 8.992205] [drm] fb0: inteldrmfb frame buffer device Sep 29 22:08:43 BrianLinux kernel: [ 8.992217] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0 Sep 29 22:08:43 BrianLinux kernel: [ 9.046600] alloc irq_desc for 22 on node -1 Sep 29 22:08:43 BrianLinux kernel: [ 9.046605] alloc kstat_irqs on node -1 Sep 29 22:08:43 BrianLinux kernel: [ 9.046615] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 Sep 29 22:08:43 BrianLinux kernel: [ 9.046664] HDA Intel 0000:00:1b.0: setting latency timer to 64 Sep 29 22:08:43 BrianLinux kernel: [ 9.128851] [drm] LVDS-8: set mode 1280x800 17 Sep 29 22:08:44 BrianLinux kernel: [ 9.289761] Console: switching to colour frame buffer device 160x50 Sep 29 22:08:44 BrianLinux kernel: [ 9.332986] Synaptics Touchpad, model: 1, fw: 6.2, id: 0x1a0b1, caps: 0xa04713/0x200000 Sep 29 22:08:44 BrianLinux kernel: [ 9.407591] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input7 Sep 29 22:08:44 BrianLinux kernel: [ 10.336917] Adding 1558296k swap on /dev/sda4. Priority:-1 extents:1 across:1558296k Sep 29 22:08:44 BrianLinux kernel: [ 10.459893] EXT4-fs (sda1): internal journal on sda1:8 Sep 29 22:08:44 BrianLinux kernel: [ 11.989099] type=1505 audit(1254280124.135:9): operation="profile_replace" pid=709 name=/usr/sbin/tcpdump Sep 29 22:08:44 BrianLinux kernel: [ 11.991356] type=1505 audit(1254280124.135:10): operation="profile_replace" pid=710 name=/sbin/dhclient3 Sep 29 22:08:44 BrianLinux kernel: [ 11.992641] type=1505 audit(1254280124.139:11): operation="profile_replace" pid=710 name=/usr/lib/NetworkManager/nm-dhcp-client.action Sep 29 22:08:44 BrianLinux kernel: [ 11.993093] type=1505 audit(1254280124.139:12): operation="profile_replace" pid=710 name=/usr/lib/connman/scripts/dhclient-script Sep 29 22:08:44 BrianLinux NetworkManager: starting... Sep 29 22:08:44 BrianLinux NetworkManager: Trying to start the modem-manager... Sep 29 22:08:44 BrianLinux modem-manager: Loaded plugin Nokia Sep 29 22:08:44 BrianLinux modem-manager: Loaded plugin Sierra Sep 29 22:08:44 BrianLinux modem-manager: Loaded plugin ZTE Sep 29 22:08:44 BrianLinux modem-manager: Loaded plugin Novatel Sep 29 22:08:44 BrianLinux modem-manager: Loaded plugin Huawei Sep 29 22:08:44 BrianLinux modem-manager: Loaded plugin Option High-Speed Sep 29 22:08:44 BrianLinux modem-manager: Loaded plugin Ericsson MBM Sep 29 22:08:44 BrianLinux modem-manager: Loaded plugin Gobi Sep 29 22:08:44 BrianLinux modem-manager: Loaded plugin MotoC Sep 29 22:08:44 BrianLinux modem-manager: Loaded plugin Generic Sep 29 22:08:44 BrianLinux modem-manager: Loaded plugin Option Sep 29 22:08:44 BrianLinux NetworkManager: SCPlugin-Ifupdown: init! Sep 29 22:08:44 BrianLinux NetworkManager: SCPlugin-Ifupdown: update_system_hostname Sep 29 22:08:44 BrianLinux NetworkManager: SCPluginIfupdown: management mode: unmanaged Sep 29 22:08:44 BrianLinux NetworkManager: SCPlugin-Ifupdown: devices added (path: /sys/devices/pci0000:00/0000:00:1c.2/0000:06:00.0/net/eth1, iface: eth1) Sep 29 22:08:44 BrianLinux NetworkManager: SCPlugin-Ifupdown: device added (path: /sys/devices/pci0000:00/0000:00:1c.2/0000:06:00.0/net/eth1, iface: eth1): no exported connection Sep 29 22:08:44 BrianLinux NetworkManager: SCPlugin-Ifupdown: devices added (path: /sys/devices/pci0000:00/0000:00:1e.0/0000:08:08.0/net/eth0, iface: eth0) Sep 29 22:08:44 BrianLinux NetworkManager: SCPlugin-Ifupdown: device added (path: /sys/devices/pci0000:00/0000:00:1e.0/0000:08:08.0/net/eth0, iface: eth0): no exported connection Sep 29 22:08:44 BrianLinux NetworkManager: SCPlugin-Ifupdown: devices added (path: /sys/devices/virtual/net/lo, iface: lo) Sep 29 22:08:44 BrianLinux NetworkManager: SCPlugin-Ifupdown: device added (path: /sys/devices/virtual/net/lo, iface: lo): no exported connection Sep 29 22:08:44 BrianLinux NetworkManager: SCPlugin-Ifupdown: end _init. Sep 29 22:08:44 BrianLinux NetworkManager: Loaded plugin ifupdown: (C) 2008 Canonical Ltd. To report bugs please use the NetworkManager mailing list. Sep 29 22:08:44 BrianLinux NetworkManager: Loaded plugin keyfile: (c) 2007 - 2008 Red Hat, Inc. To report bugs please use the NetworkManager mailing list. Sep 29 22:08:44 BrianLinux NetworkManager: Wireless now enabled by radio killswitch Sep 29 22:08:44 BrianLinux NetworkManager: SCPlugin-Ifupdown: (140348144) ... get_connections. Sep 29 22:08:44 BrianLinux NetworkManager: SCPlugin-Ifupdown: (140348144) ... get_connections (managed=false): return empty list. Sep 29 22:08:45 BrianLinux NetworkManager: Ifupdown: get unmanaged devices count: 0 Sep 29 22:08:46 BrianLinux NetworkManager: (eth1): driver supports SSID scans (scan_capa 0x01). Sep 29 22:08:46 BrianLinux NetworkManager: (eth1): new 802.11 WiFi device (driver: 'wl') Sep 29 22:08:46 BrianLinux NetworkManager: (eth1): exported as /org/freedesktop/NetworkManager/Devices/0 Sep 29 22:08:46 BrianLinux NetworkManager: (eth1): now managed Sep 29 22:08:46 BrianLinux NetworkManager: (eth1): device state change: 1 -> 2 (reason 2) Sep 29 22:08:46 BrianLinux NetworkManager: (eth1): preparing device. Sep 29 22:08:46 BrianLinux NetworkManager: (eth1): deactivating device (reason: 2). Sep 29 22:08:46 BrianLinux NetworkManager: supplicant_interface_acquire: assertion `mgr_state == NM_SUPPLICANT_MANAGER_STATE_IDLE' failed Sep 29 22:08:46 BrianLinux NetworkManager: (eth0): new Ethernet device (driver: '8139too') Sep 29 22:08:46 BrianLinux NetworkManager: (eth0): exported as /org/freedesktop/NetworkManager/Devices/1 Sep 29 22:08:46 BrianLinux NetworkManager: (eth0): now managed Sep 29 22:08:46 BrianLinux NetworkManager: (eth0): device state change: 1 -> 2 (reason 2) Sep 29 22:08:46 BrianLinux NetworkManager: (eth0): bringing up device. Sep 29 22:08:46 BrianLinux NetworkManager: (eth0): preparing device. Sep 29 22:08:46 BrianLinux NetworkManager: (eth0): deactivating device (reason: 2). Sep 29 22:08:46 BrianLinux NetworkManager: Added default wired connection 'Auto eth0' for /sys/devices/pci0000:00/0000:00:1e.0/0000:08:08.0/net/eth0 Sep 29 22:08:46 BrianLinux NetworkManager: modem-manager is now available Sep 29 22:08:46 BrianLinux NetworkManager: default_adapter_cb(): bluez error getting default adapter: The name org.bluez was not provided by any .service files Sep 29 22:08:46 BrianLinux NetworkManager: Trying to start the supplicant... Sep 29 22:08:46 BrianLinux NetworkManager: (eth1): supplicant manager state: down -> idle Sep 29 22:08:46 BrianLinux NetworkManager: (eth1): device state change: 2 -> 3 (reason 0) Sep 29 22:08:46 BrianLinux NetworkManager: (eth1): supplicant interface state: starting -> ready Sep 29 22:08:50 BrianLinux kernel: [ 11.995354] type=1505 audit(1254280124.139:13): operation="profile_replace" pid=711 name=/usr/sbin/mysqld-akonadi Sep 29 22:08:50 BrianLinux kernel: [ 11.999495] type=1505 audit(1254280124.143:14): operation="profile_replace" pid=713 name=/usr/lib/cups/backend/cups-pdf Sep 29 22:08:50 BrianLinux kernel: [ 12.000639] type=1505 audit(1254280124.147:15): operation="profile_replace" pid=713 name=/usr/sbin/cupsd Sep 29 22:08:50 BrianLinux kernel: [ 14.133470] eth0: link down Sep 29 22:08:50 BrianLinux kernel: [ 14.133757] ADDRCONF(NETDEV_UP): eth0: link is not ready Sep 29 22:08:50 BrianLinux kernel: [ 15.743059] ppdev: user-space parallel port driver Sep 29 22:08:50 BrianLinux kernel: [ 17.360963] [drm] TV-14: set mode NTSC 480i 0 Sep 29 22:08:50 BrianLinux kernel: [ 17.519619] [drm] TV-14: set mode NTSC 480i 0 Sep 29 22:09:41 BrianLinux NetworkManager: Activation (eth1) starting connection 'ELCNet' Sep 29 22:09:41 BrianLinux NetworkManager: (eth1): device state change: 3 -> 4 (reason 0) Sep 29 22:09:41 BrianLinux NetworkManager: Activation (eth1) Stage 1 of 5 (Device Prepare) scheduled... Sep 29 22:09:41 BrianLinux NetworkManager: Activation (eth1) Stage 1 of 5 (Device Prepare) started... Sep 29 22:09:41 BrianLinux NetworkManager: Activation (eth1) Stage 2 of 5 (Device Configure) scheduled... Sep 29 22:09:41 BrianLinux NetworkManager: Activation (eth1) Stage 1 of 5 (Device Prepare) complete. Sep 29 22:09:41 BrianLinux NetworkManager: Activation (eth1) Stage 2 of 5 (Device Configure) starting... Sep 29 22:09:41 BrianLinux NetworkManager: (eth1): device state change: 4 -> 5 (reason 0) Sep 29 22:09:41 BrianLinux NetworkManager: Activation (eth1/wireless): access point 'ELCNet' has security, but secrets are required. Sep 29 22:09:41 BrianLinux NetworkManager: (eth1): device state change: 5 -> 6 (reason 0) Sep 29 22:09:41 BrianLinux NetworkManager: Activation (eth1) Stage 2 of 5 (Device Configure) complete. Sep 29 22:09:47 BrianLinux NetworkManager: (eth1): supplicant connection state: scanning -> inactive Sep 29 22:10:17 BrianLinux NetworkManager: (eth1): supplicant connection state: inactive -> scanning Sep 29 22:10:27 BrianLinux NetworkManager: (eth1): supplicant connection state: scanning -> inactive Sep 29 22:11:07 BrianLinux NetworkManager: (eth1): supplicant connection state: inactive -> scanning Sep 29 22:11:08 BrianLinux NetworkManager: secrets_update_setting(): Failed to update connection secrets: 1 ipv4 Sep 29 22:11:08 BrianLinux NetworkManager: secrets_update_setting(): Failed to update connection secrets: 1 802-1x Sep 29 22:11:08 BrianLinux NetworkManager: Activation (eth1) Stage 1 of 5 (Device Prepare) scheduled... Sep 29 22:11:08 BrianLinux NetworkManager: Activation (eth1) Stage 1 of 5 (Device Prepare) started... Sep 29 22:11:08 BrianLinux NetworkManager: (eth1): device state change: 6 -> 4 (reason 0) Sep 29 22:11:08 BrianLinux NetworkManager: Activation (eth1) Stage 2 of 5 (Device Configure) scheduled... Sep 29 22:11:08 BrianLinux NetworkManager: Activation (eth1) Stage 1 of 5 (Device Prepare) complete. Sep 29 22:11:08 BrianLinux NetworkManager: Activation (eth1) Stage 2 of 5 (Device Configure) starting... Sep 29 22:11:08 BrianLinux NetworkManager: (eth1): device state change: 4 -> 5 (reason 0) Sep 29 22:11:08 BrianLinux NetworkManager: Activation (eth1/wireless): connection 'ELCNet' has security, and secrets exist. No new secrets needed. Sep 29 22:11:08 BrianLinux NetworkManager: Config: added 'ssid' value 'ELCNet' Sep 29 22:11:08 BrianLinux NetworkManager: Config: added 'scan_ssid' value '1' Sep 29 22:11:08 BrianLinux NetworkManager: Config: added 'key_mgmt' value 'NONE' Sep 29 22:11:08 BrianLinux NetworkManager: Config: added 'wep_key0' value '' Sep 29 22:11:08 BrianLinux NetworkManager: Config: added 'wep_tx_keyidx' value '0' Sep 29 22:11:08 BrianLinux NetworkManager: nm_setting_802_1x_get_pkcs11_engine_path: assertion `NM_IS_SETTING_802_1X (setting)' failed Sep 29 22:11:08 BrianLinux NetworkManager: nm_setting_802_1x_get_pkcs11_module_path: assertion `NM_IS_SETTING_802_1X (setting)' failed Sep 29 22:11:08 BrianLinux NetworkManager: Activation (eth1) Stage 2 of 5 (Device Configure) complete. Sep 29 22:11:08 BrianLinux NetworkManager: Config: set interface ap_scan to 1 Sep 29 22:11:08 BrianLinux NetworkManager: (eth1): supplicant connection state: scanning -> disconnected Sep 29 22:11:08 BrianLinux NetworkManager: (eth1): supplicant connection state: disconnected -> scanning Sep 29 22:11:13 BrianLinux NetworkManager: (eth1): supplicant connection state: scanning -> associating Sep 29 22:11:13 BrianLinux NetworkManager: (eth1): supplicant connection state: associating -> associated Sep 29 22:11:13 BrianLinux NetworkManager: (eth1): supplicant connection state: associated -> completed Sep 29 22:11:13 BrianLinux NetworkManager: Activation (eth1/wireless) Stage 2 of 5 (Device Configure) successful. Connected to wireless network 'ELCNet'. Sep 29 22:11:13 BrianLinux NetworkManager: Activation (eth1) Stage 3 of 5 (IP Configure Start) scheduled. Sep 29 22:11:13 BrianLinux NetworkManager: Activation (eth1) Stage 3 of 5 (IP Configure Start) started... Sep 29 22:11:13 BrianLinux NetworkManager: (eth1): device state change: 5 -> 7 (reason 0) Sep 29 22:11:13 BrianLinux NetworkManager: Activation (eth1) Beginning DHCP transaction (timeout in 45 seconds) Sep 29 22:11:13 BrianLinux NetworkManager: dhclient started with pid 1747 Sep 29 22:11:13 BrianLinux NetworkManager: Activation (eth1) Stage 4 of 5 (IP6 Configure Get) scheduled... Sep 29 22:11:13 BrianLinux NetworkManager: Activation (eth1) Stage 3 of 5 (IP Configure Start) complete. Sep 29 22:11:13 BrianLinux NetworkManager: Activation (eth1) Stage 4 of 5 (IP6 Configure Get) started... Sep 29 22:11:13 BrianLinux NetworkManager: Activation (eth1) Stage 4 of 5 (IP6 Configure Get) complete. Sep 29 22:11:13 BrianLinux dhclient: Internet Systems Consortium DHCP Client V3.1.2 Sep 29 22:11:13 BrianLinux dhclient: Copyright 2004-2008 Internet Systems Consortium. Sep 29 22:11:13 BrianLinux dhclient: All rights reserved. Sep 29 22:11:13 BrianLinux dhclient: For info, please visit http://www.isc.org/sw/dhcp/ Sep 29 22:11:13 BrianLinux dhclient: Sep 29 22:11:13 BrianLinux NetworkManager: DHCP: device eth1 state changed (null) -> preinit Sep 29 22:11:13 BrianLinux dhclient: Listening on LPF/eth1/00:14:a5:f0:81:57 Sep 29 22:11:13 BrianLinux dhclient: Sending on LPF/eth1/00:14:a5:f0:81:57 Sep 29 22:11:13 BrianLinux dhclient: Sending on Socket/fallback Sep 29 22:11:16 BrianLinux dhclient: DHCPDISCOVER on eth1 to 255.255.255.255 port 67 interval 3 Sep 29 22:11:16 BrianLinux dhclient: DHCPOFFER of 192.168.2.193 from 192.168.2.1 Sep 29 22:11:16 BrianLinux dhclient: DHCPREQUEST of 192.168.2.193 on eth1 to 255.255.255.255 port 67 Sep 29 22:11:16 BrianLinux dhclient: DHCPACK of 192.168.2.193 from 192.168.2.1 Sep 29 22:11:16 BrianLinux NetworkManager: DHCP: device eth1 state changed preinit -> bound Sep 29 22:11:16 BrianLinux NetworkManager: Activation (eth1) Stage 4 of 5 (IP4 Configure Get) scheduled... Sep 29 22:11:16 BrianLinux NetworkManager: Activation (eth1) Stage 4 of 5 (IP4 Configure Get) started... Sep 29 22:11:16 BrianLinux dhclient: bound to 192.168.2.193 -- renewal in 42777 seconds. Sep 29 22:11:16 BrianLinux NetworkManager: address 192.168.2.193 Sep 29 22:11:16 BrianLinux NetworkManager: prefix 24 (255.255.255.0) Sep 29 22:11:16 BrianLinux NetworkManager: gateway 192.168.2.1 Sep 29 22:11:16 BrianLinux NetworkManager: nameserver '192.168.2.1' Sep 29 22:11:16 BrianLinux NetworkManager: Activation (eth1) Stage 5 of 5 (IP Configure Commit) scheduled... Sep 29 22:11:16 BrianLinux NetworkManager: Activation (eth1) Stage 4 of 5 (IP4 Configure Get) complete. Sep 29 22:11:16 BrianLinux NetworkManager: Activation (eth1) Stage 5 of 5 (IP Configure Commit) started... Sep 29 22:11:17 BrianLinux NetworkManager: (eth1): device state change: 7 -> 8 (reason 0) Sep 29 22:11:17 BrianLinux NetworkManager: [1254280277.487298] periodic_update(): Roamed from BSSID 00:1B:11:EF:F7:26 (ELCNet) to (none) ((none)) Sep 29 22:11:17 BrianLinux NetworkManager: Policy set 'ELCNet' (eth1) as default for routing and DNS. Sep 29 22:11:17 BrianLinux NetworkManager: Activation (eth1) successful, device activated. Sep 29 22:11:17 BrianLinux NetworkManager: Activation (eth1) Stage 5 of 5 (IP Configure Commit) complete. Sep 29 22:24:14 BrianLinux kernel: [ 17.852839] [drm] TV-14: set mode NTSC 480i 0 Sep 29 22:24:14 BrianLinux kernel: [ 17.997910] [drm] TV-14: set mode NTSC 480i 0 Sep 29 22:24:14 BrianLinux kernel: [ 24.768032] eth1: no IPv6 routers present Sep 29 22:24:14 BrianLinux kernel: [ 38.675260] [drm] TV-14: set mode NTSC 480i 0 Sep 29 22:24:14 BrianLinux kernel: [ 38.818292] [drm] TV-14: set mode NTSC 480i 0 Sep 29 22:24:14 BrianLinux kernel: [ 39.423278] [drm] TV-14: set mode NTSC 480i 0 Sep 29 22:24:14 BrianLinux kernel: [ 39.566533] [drm] TV-14: set mode NTSC 480i 0 Sep 29 22:24:14 BrianLinux kernel: [ 940.849931] SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled Sep 29 22:25:55 BrianLinux kernel: [ 940.855517] SGI XFS Quota Management subsystem Sep 29 22:25:55 BrianLinux kernel: [ 940.891107] JFS: nTxBlock = 8192, nTxLock = 65536 Sep 29 22:25:55 BrianLinux kernel: [ 940.945361] NTFS driver 2.1.29 [Flags: R/O MODULE]. Sep 29 22:25:55 BrianLinux kernel: [ 941.005606] QNX4 filesystem 0.2.3 registered. Sep 29 22:25:55 BrianLinux kernel: [ 1041.738240] type=1505 audit(1254281155.828:16): operation="profile_replace" pid=5278 name=/usr/sbin/tcpdump Sep 29 22:25:55 BrianLinux kernel: [ 1041.740979] type=1505 audit(1254281155.832:17): operation="profile_replace" pid=5279 name=/sbin/dhclient3 Sep 29 22:25:55 BrianLinux kernel: [ 1041.744817] type=1505 audit(1254281155.836:18): operation="profile_replace" pid=5279 name=/usr/lib/NetworkManager/nm-dhcp-client.action Sep 29 22:25:55 BrianLinux kernel: [ 1041.745287] type=1505 audit(1254281155.836:19): operation="profile_replace" pid=5279 name=/usr/lib/connman/scripts/dhclient-script Sep 29 22:25:55 BrianLinux kernel: [ 1041.747746] type=1505 audit(1254281155.836:20): operation="profile_replace" pid=5280 name=/usr/sbin/mysqld-akonadi Sep 29 22:25:55 BrianLinux kernel: [ 1041.752771] type=1505 audit(1254281155.844:21): operation="profile_replace" pid=5282 name=/usr/lib/cups/backend/cups-pdf Sep 29 22:27:41 BrianLinux NetworkManager: nm_signal_handler(): Caught signal 15, shutting down normally. Sep 29 22:27:41 BrianLinux NetworkManager: (eth1): deactivating device (reason: 36). Sep 29 22:27:41 BrianLinux kernel: Kernel logging (proc) stopped. Sep 30 06:07:35 BrianLinux kernel: imklog 4.2.0, log source = /var/run/rsyslog/kmsg started. Sep 30 06:07:35 BrianLinux kernel: [ 0.000000] Initializing cgroup subsys cpuset Sep 30 06:07:35 BrianLinux kernel: [ 0.000000] Initializing cgroup subsys cpu Sep 30 06:07:35 BrianLinux kernel: [ 0.000000] Linux version 2.6.31-10-generic (buildd@rothera) (gcc version 4.4.1 (Ubuntu 4.4.1-4ubuntu1) ) #35-Ubuntu SMP Tue Sep 22 17:33:42 UTC 2009 (Ubuntu 2.6.31-10.35-generic) Sep 30 06:07:35 BrianLinux kernel: [ 0.000000] KERNEL supported cpus: Sep 30 06:07:35 BrianLinux kernel: [ 0.000000] Intel GenuineIntel Sep 30 06:07:35 BrianLinux kernel: [ 0.000000] AMD AuthenticAMD Sep 30 06:07:35 BrianLinux kernel: [ 0.000000] NSC Geode by NSC Sep 30 06:07:35 BrianLinux kernel: [ 0.000000] Cyrix CyrixInstead Sep 30 06:07:35 BrianLinux kernel: [ 0.000000] Centaur CentaurHauls Sep 30 06:07:35 BrianLinux kernel: [ 0.000000] Transmeta GenuineTMx86 Sep 30 06:07:35 BrianLinux kernel: [ 0.000000] Transmeta TransmetaCPU Sep 30 06:07:35 BrianLinux kernel: [ 0.000000] UMC UMC UMC UMC Sep 30 06:07:35 BrianLinux kernel: [ 0.000000] BIOS-provided physical RAM map: Sep 30 06:07:35 BrianLinux kernel: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable) Sep 30 06:07:35 BrianLinux kernel: [ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) Sep 30 06:07:35 BrianLinux kernel: [ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) Sep 30 06:07:35 BrianLinux kernel: [ 0.000000] BIOS-e820: 0000000000100000 - 000000007f680000 (usable) Sep 30 06:07:35 BrianLinux kernel: [ 0.000000] BIOS-e820: 000000007f680000 - 000000007f700000 (ACPI NVS) Sep 30 06:07:35 BrianLinux kernel: [ 0.000000] BIOS-e820: 000000007f700000 - 0000000080000000 (reserved) Sep 30 06:07:35 BrianLinux kernel: [ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) Sep 30 06:07:35 BrianLinux kernel: [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) Sep 30 06:07:35 BrianLinux kernel: [ 0.000000] BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved) Sep 30 06:07:35 BrianLinux kernel: [ 0.000000] BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved) Sep 30 06:07:35 BrianLinux kernel: [ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved) Sep 30 06:07:35 BrianLinux kernel: [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) Sep 30 06:07:35 BrianLinux kernel: [ 0.000000] BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved) Sep 30 06:07:35 BrianLinux kernel: [ 0.000000] DMI present. Sep 30 06:07:35 BrianLinux kernel: [ 0.000000] last_pfn = 0x7f680 max_arch_pfn = 0x100000 Sep 30 06:07:35 BrianLinux kernel: [ 0.000000] MTRR default type: uncachable Sep 30 06:07:35 BrianLinux kernel: [ 0.000000] MTRR fixed ranges enabled: Sep 30 06:07:35 BrianLinux kernel: [ 0.000000] 00000-9FFFF write-back Sep 30 06:07:35 BrianLinux kernel: [ 0.000000] A0000-BFFFF uncachable Sep 30 06:07:35 BrianLinux kernel: [ 0.000000] C0000-CFFFF write-protect Sep 30 06:07:35 BrianLinux kernel: [ 0.000000] D0000-DFFFF uncachable Sep 30 06:07:35 BrianLinux kernel: [ 0.000000] E0000-FFFFF write-protect Sep 30 06:07:35 BrianLinux kernel: [ 0.000000] MTRR variable ranges enabled: Sep 30 06:07:35 BrianLinux kernel: [ 0.000000] 0 base 000000000 mask F80000000 write-back Sep 30 06:07:35 BrianLinux kernel: [ 0.000000] 1 base 07F700000 mask FFFF00000 uncachable Sep 30 06:07:35 BrianLinux kernel: [ 0.000000] 2 base 07F800000 mask FFF800000 uncachable Sep 30 06:07:35 BrianLinux kernel: [ 0.000000] 3 disabled Sep 30 06:07:35 BrianLinux kernel: [ 0.000000] 4 disabled Sep 30 06:07:35 BrianLinux kernel: [ 0.000000] 5 disabled Sep 30 06:07:35 BrianLinux kernel: [ 0.000000] 6 disabled Sep 30 06:07:35 BrianLinux kernel: [ 0.000000] 7 disabled Sep 30 06:07:35 BrianLinux kernel: [ 0.000000] e820 update range: 0000000000002000 - 0000000000006000 (usable) ==> (reserved) Sep 30 06:07:35 BrianLinux kernel: [ 0.000000] Scanning 1 areas for low memory corruption Sep 30 06:07:35 BrianLinux kernel: [ 0.000000] modified physical RAM map: Sep 30 06:07:35 BrianLinux kernel: [ 0.000000] modified: 0000000000000000 - 0000000000002000 (usable) Sep 30 06:07:35 BrianLinux kernel: [ 0.000000] modified: 0000000000002000 - 0000000000006000 (reserved) Sep 30 06:07:35 BrianLinux kernel: [ 0.000000] modified: 0000000000006000 - 000000000009f800 (usable) Sep 30 06:07:35 BrianLinux kernel: [ 0.000000] modified: 000000000009f800 - 00000000000a0000 (reserved) Sep 30 06:07:35 BrianLinux kernel: [ 0.000000] modified: 00000000000e0000 - 0000000000100000 (reserved) Sep 30 06:07:35 BrianLinux kernel: [ 0.000000] modified: 0000000000100000 - 000000007f680000 (usable) Sep 30 06:07:35 BrianLinux kernel: [ 0.000000] modified: 000000007f680000 - 000000007f700000 (ACPI NVS) Sep 30 06:07:35 BrianLinux kernel: [ 0.000000] modified: 000000007f700000 - 0000000080000000 (reserved) Sep 30 06:07:35 BrianLinux kernel: [ 0.000000] modified: 00000000e0000000 - 00000000f0000000 (reserved) Sep 30 06:07:35 BrianLinux kernel: [ 0.000000] modified: 00000000fec00000 - 00000000fec10000 (reserved) Sep 30 06:07:35 BrianLinux kernel: [ 0.000000] modified: 00000000fed00000 - 00000000fed00400 (reserved) Sep 30 06:07:35 BrianLinux kernel: [ 0.000000] modified: 00000000fed14000 - 00000000fed1a000 (reserved) Sep 30 06:07:35 BrianLinux kernel: [ 0.000000] modified: 00000000fed1c000 - 00000000fed90000 (reserved) Sep 30 06:07:35 BrianLinux kernel: [ 0.000000] modified: 00000000fee00000 - 00000000fee01000 (reserved) Sep 30 06:07:35 BrianLinux kernel: [ 0.000000] modified: 00000000ff000000 - 0000000100000000 (reserved) Sep 30 06:07:35 BrianLinux kernel: [ 0.000000] initial memory mapped : 0 - 00c00000 Sep 30 06:07:35 BrianLinux kernel: [ 0.000000] init_memory_mapping: 0000000000000000-00000000377fe000 Sep 30 06:07:35 BrianLinux kernel: [ 0.000000] Using x86 segment limits to approximate NX protection Sep 30 06:07:35 BrianLinux kernel: [ 0.000000] 0000000000 - 0000400000 page 4k Sep 30 06:07:35 BrianLinux kernel: [ 0.000000] 0000400000 - 0037400000 page 2M Sep 30 06:07:35 BrianLinux kernel: [ 0.000000] 0037400000 - 00377fe000 page 4k Sep 30 06:07:35 BrianLinux kernel: [ 0.000000] kernel direct mapping tables up to 377fe000 @ 7000-c000 Sep 30 06:07:35 BrianLinux kernel: [ 0.000000] RAMDISK: 37975000 - 37fef9e8 Sep 30 06:07:35 BrianLinux kernel: [ 0.000000] Allocated new RAMDISK: 008a4000 - 00f1e9e8 Sep 30 06:07:35 BrianLinux kernel: [ 0.000000] Move RAMDISK from 0000000037975000 - 0000000037fef9e7 to 008a4000 - 00f1e9e7 Sep 30 06:07:35 BrianLinux kernel: [ 0.000000] ACPI: RSDP 000f6510 00014 (v00 PTLTD ) Sep 30 06:07:35 BrianLinux kernel: [ 0.000000] ACPI: RSDT 7f68cee1 0004C (v01 HPQOEM SLIC-MPC 06040000 LTP 00000000) Sep 30 06:07:35 BrianLinux kernel: [ 0.000000] ACPI: FACP 7f693c86 00074 (v01 HP NISSAN 06040000 LOHR 0000005A) Sep 30 06:07:35 BrianLinux kernel: [ 0.000000] ACPI: DSDT 7f68d80d 06479 (v01 HP NISSAN 06040000 INTL 20060608) Sep 30 06:07:35 BrianLinux kernel: [ 0.000000] ACPI: FACS 7f694fc0 00040 Sep 30 06:07:35 BrianLinux kernel: [ 0.000000] ACPI: APIC 7f693cfa 00068 (v01 HP NISSAN 06040000 LOHR 0000005A) Sep 30 06:07:35 BrianLinux kernel: [ 0.000000] ACPI: HPET 7f693d62 00038 (v01 HP NISSAN 06040000 LOHR 0000005A) Sep 30 06:07:35 BrianLinux kernel: [ 0.000000] ACPI: MCFG 7f693d9a 0003C (v01 HP NISSAN 06040000 LOHR 0000005A) Sep 30 06:07:35 BrianLinux kernel: [ 0.000000] ACPI: BOOT 7f693fd8 00028 (v01 PTLTD $SBFTBL$ 06040000 LTP 00000001) Sep 30 06:07:35 BrianLinux kernel: [ 0.000000] ACPI: SLIC 7f693e08 00176 (v01 HPQOEM SLIC-MPC 06040000 LOHR 00000000) Sep 30 06:07:35 BrianLinux kernel: [ 0.000000] ACPI: APIC 7f693f7e 0005A (v01 PTLTD APIC 06040000 LTP 00000000) Sep 30 06:07:35 BrianLinux kernel: [ 0.000000] ACPI: SSDT 7f68d5ff 0020A (v01 SataRe SataAhci 00001000 INTL 20060217) Sep 30 06:07:35 BrianLinux kernel: [ 0.000000] ACPI: SSDT 7f68d423 001DC (v01 PmRef Cpu0Cst 00003001 INTL 20060217) Sep 30 06:07:35 BrianLinux kernel: [ 0.000000] ACPI: SSDT 7f68cf2d 004F6 (v01 PmRef CpuPm 00003000 INTL 20060217) Sep 30 06:07:35 BrianLinux kernel: [ 0.000000] ACPI: BIOS bug: multiple APIC/MADT found, using 0 Sep 30 06:07:35 BrianLinux kernel: [ 0.000000] ACPI: If "acpi_apic_instance=2" works better, notify linux-acpi@vger.kernel.org Sep 30 06:07:35 BrianLinux kernel: [ 0.000000] ACPI: Local APIC address 0xfee00000 Sep 30 06:07:35 BrianLinux kernel: [ 0.000000] 1150MB HIGHMEM available. Sep 30 06:07:35 BrianLinux kernel: [ 0.000000] 887MB LOWMEM available. Sep 30 06:07:35 BrianLinux kernel: [ 0.000000] mapped low ram: 0 - 377fe000 Sep 30 06:07:35 BrianLinux kernel: [ 0.000000] low ram: 0 - 377fe000 Sep 30 06:07:35 BrianLinux kernel: [ 0.000000] node 0 low ram: 00000000 - 377fe000 Sep 30 06:07:35 BrianLinux kernel: [ 0.000000] node 0 bootmap 00008000 - 0000ef00 Sep 30 06:07:35 BrianLinux kernel: [ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 00377fe000] Sep 30 06:07:35 BrianLinux kernel: [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] Sep 30 06:07:35 BrianLinux kernel: [ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000] Sep 30 06:07:35 BrianLinux kernel: [ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000] Sep 30 06:07:35 BrianLinux kernel: [ 0.000000] #3 [0000100000 - 000089f080] TEXT DATA BSS ==> [0000100000 - 000089f080] Sep 30 06:07:35 BrianLinux kernel: [ 0.000000] #4 [000009f800 - 0000100000] BIOS reserved ==> [000009f800 - 0000100000] Sep 30 06:07:35 BrianLinux kernel: [ 0.000000] #5 [00008a0000 - 00008a312c] BRK ==> [00008a0000 - 00008a312c] Sep 30 06:07:35 BrianLinux kernel: [ 0.000000] #6 [0000007000 - 0000008000] PGTABLE ==> [0000007000 - 0000008000] Sep 30 06:07:35 BrianLinux kernel: [ 0.000000] #7 [00008a4000 - 0000f1e9e8] NEW RAMDISK ==> [00008a4000 - 0000f1e9e8] Sep 30 06:07:35 BrianLinux kernel: [ 0.000000] #8 [0000008000 - 000000f000] BOOTMAP ==> [0000008000 - 000000f000] Sep 30 06:07:35 BrianLinux kernel: [ 0.000000] found SMP MP-table at [c00f65c0] f65c0 Sep 30 06:07:35 BrianLinux kernel: [ 0.000000] Zone PFN ranges: Sep 30 06:07:35 BrianLinux kernel: [ 0.000000] DMA 0x00000000 -> 0x00001000 Sep 30 06:07:35 BrianLinux kernel: [ 0.000000] Normal 0x00001000 -> 0x000377fe Sep 30 06:07:35 BrianLinux kernel: [ 0.000000] HighMem 0x000377fe -> 0x0007f680 Sep 30 06:07:35 BrianLinux kernel: [ 0.000000] Movable zone start PFN for each node Sep 30 06:07:35 BrianLinux kernel: [ 0.000000] early_node_map[3] active PFN ranges Sep 30 06:07:35 BrianLinux kernel: [ 0.000000] 0: 0x00000000 -> 0x00000002 Sep 30 06:07:35 BrianLinux kernel: [ 0.000000] 0: 0x00000006 -> 0x0000009f Sep 30 06:07:35 BrianLinux kernel: [ 0.000000] 0: 0x00000100 -> 0x0007f680 Sep 30 06:07:35 BrianLinux kernel: [ 0.000000] On node 0 totalpages: 521755 Sep 30 06:07:35 BrianLinux kernel: [ 0.000000] free_area_init_node: node 0, pgdat c077b840, node_mem_map c1000000 Sep 30 06:07:35 BrianLinux kernel: [ 0.000000] DMA zone: 32 pages used for memmap Sep 30 06:07:35 BrianLinux kernel: [ 0.000000] DMA zone: 0 pages reserved Sep 30 06:07:35 BrianLinux kernel: [ 0.000000] DMA zone: 3963 pages, LIFO batch:0 Sep 30 06:07:35 BrianLinux kernel: [ 0.000000] Normal zone: 1744 pages used for memmap Sep 30 06:07:35 BrianLinux kernel: [ 0.000000] Normal zone: 221486 pages, LIFO batch:31 Sep 30 06:07:35 BrianLinux kernel: [ 0.000000] HighMem zone: 2302 pages used for memmap Sep 30 06:07:35 BrianLinux kernel: [ 0.000000] HighMem zone: 292228 pages, LIFO batch:31 Sep 30 06:07:35 BrianLinux kernel: [ 0.000000] Using APIC driver default Sep 30 06:07:35 BrianLinux kernel: [ 0.000000] ACPI: PM-Timer IO Port: 0x1008 Sep 30 06:07:35 BrianLinux kernel: [ 0.000000] ACPI: Local APIC address 0xfee00000 Sep 30 06:07:35 BrianLinux kernel: [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) Sep 30 06:07:35 BrianLinux kernel: [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] disabled) Sep 30 06:07:35 BrianLinux kernel: [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) Sep 30 06:07:35 BrianLinux kernel: [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) Sep 30 06:07:35 BrianLinux kernel: [ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) Sep 30 06:07:35 BrianLinux kernel: [ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23 Sep 30 06:07:35 BrianLinux kernel: [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) Sep 30 06:07:35 BrianLinux kernel: [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) Sep 30 06:07:35 BrianLinux kernel: [ 0.000000] ACPI: IRQ0 used by override. Sep 30 06:07:35 BrianLinux kernel: [ 0.000000] ACPI: IRQ2 used by override. Sep 30 06:07:35 BrianLinux kernel: [ 0.000000] ACPI: IRQ9 used by override. Sep 30 06:07:35 BrianLinux kernel: [ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs Sep 30 06:07:35 BrianLinux kernel: [ 0.000000] Using ACPI (MADT) for SMP configuration information Sep 30 06:07:35 BrianLinux kernel: [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 Sep 30 06:07:35 BrianLinux kernel: [ 0.000000] SMP: Allowing 2 CPUs, 1 hotplug CPUs Sep 30 06:07:35 BrianLinux kernel: [ 0.000000] nr_irqs_gsi: 24 Sep 30 06:07:35 BrianLinux kernel: [ 0.000000] PM: Registered nosave memory: 0000000000002000 - 0000000000006000 Sep 30 06:07:35 BrianLinux kernel: [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 Sep 30 06:07:35 BrianLinux kernel: [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000 Sep 30 06:07:35 BrianLinux kernel: [ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000 Sep 30 06:07:35 BrianLinux kernel: [ 0.000000] Allocating PCI resources starting at 80000000 (gap: 80000000:60000000) Sep 30 06:07:35 BrianLinux kernel: [ 0.000000] NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1 Sep 30 06:07:35 BrianLinux kernel: [ 0.000000] PERCPU: Embedded 14 pages at c1ffa000, static data 35036 bytes Sep 30 06:07:35 BrianLinux kernel: [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 517677 Sep 30 06:07:35 BrianLinux kernel: [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.31-10-generic root=UUID=a1103df1-e387-4fe4-9131-bb6f1d3dd864 ro quiet splash Sep 30 06:07:35 BrianLinux kernel: [ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes) Sep 30 06:07:35 BrianLinux kernel: [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Sep 30 06:07:35 BrianLinux kernel: [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Sep 30 06:07:35 BrianLinux kernel: [ 0.000000] Enabling fast FPU save and restore... done. Sep 30 06:07:35 BrianLinux kernel: [ 0.000000] Enabling unmasked SIMD FPU exception support... done. Sep 30 06:07:35 BrianLinux kernel: [ 0.000000] Initializing CPU#0 Sep 30 06:07:35 BrianLinux kernel: [ 0.000000] allocated 10437120 bytes of page_cgroup Sep 30 06:07:35 BrianLinux kernel: [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups Sep 30 06:07:35 BrianLinux kernel: [ 0.000000] Initializing HighMem for node 0 (000377fe:0007f680) Sep 30 06:07:35 BrianLinux kernel: [ 0.000000] Memory: 2044144k/2087424k available (4543k kernel code, 41948k reserved, 2129k data, 540k init, 1178120k highmem) Sep 30 06:07:35 BrianLinux kernel: [ 0.000000] virtual kernel memory layout: Sep 30 06:07:35 BrianLinux kernel: [ 0.000000] fixmap : 0xfff1d000 - 0xfffff000 ( 904 kB) Sep 30 06:07:35 BrianLinux kernel: [ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB) Sep 30 06:07:35 BrianLinux kernel: [ 0.000000] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB) Sep 30 06:07:35 BrianLinux kernel: [ 0.000000] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB) Sep 30 06:07:35 BrianLinux kernel: [ 0.000000] .init : 0xc0785000 - 0xc080c000 ( 540 kB) Sep 30 06:07:35 BrianLinux kernel: [ 0.000000] .data : 0xc056fd84 - 0xc07841a8 (2129 kB) Sep 30 06:07:35 BrianLinux kernel: [ 0.000000] .text : 0xc0100000 - 0xc056fd84 (4543 kB) Sep 30 06:07:35 BrianLinux kernel: [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok. Sep 30 06:07:35 BrianLinux kernel: [ 0.000000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 Sep 30 06:07:35 BrianLinux kernel: [ 0.000000] NR_IRQS:2304 nr_irqs:424 Sep 30 06:07:35 BrianLinux kernel: [ 0.000000] Fast TSC calibration using PIT Sep 30 06:07:35 BrianLinux kernel: [ 0.000000] Detected 1596.248 MHz processor. Sep 30 06:07:35 BrianLinux kernel: [ 0.001857] Console: colour VGA+ 80x25 Sep 30 06:07:35 BrianLinux kernel: [ 0.001861] console [tty0] enabled Sep 30 06:07:35 BrianLinux kernel: [ 0.002075] hpet clockevent registered Sep 30 06:07:35 BrianLinux kernel: [ 0.002080] HPET: 3 timers in total, 0 timers will be used for per-cpu timer Sep 30 06:07:35 BrianLinux kernel: [ 0.002087] Calibrating delay loop (skipped), value calculated using timer frequency.. 3192.49 BogoMIPS (lpj=6384992) Sep 30 06:07:35 BrianLinux kernel: [ 0.002113] Security Framework initialized Sep 30 06:07:35 BrianLinux kernel: [ 0.002141] AppArmor: AppArmor initialized Sep 30 06:07:35 BrianLinux kernel: [ 0.002152] Mount-cache hash table entries: 512 Sep 30 06:07:35 BrianLinux kernel: [ 0.002321] Initializing cgroup subsys ns Sep 30 06:07:35 BrianLinux kernel: [ 0.002327] Initializing cgroup subsys cpuacct Sep 30 06:07:35 BrianLinux kernel: [ 0.002332] Initializing cgroup subsys memory Sep 30 06:07:35 BrianLinux kernel: [ 0.002342] Initializing cgroup subsys freezer Sep 30 06:07:35 BrianLinux kernel: [ 0.002345] Initializing cgroup subsys net_cls Sep 30 06:07:35 BrianLinux kernel: [ 0.002363] CPU: L1 I cache: 32K, L1 D cache: 32K Sep 30 06:07:35 BrianLinux kernel: [ 0.002367] CPU: L2 cache: 1024K Sep 30 06:07:35 BrianLinux kernel: [ 0.002372] using mwait in idle threads. Sep 30 06:07:35 BrianLinux kernel: [ 0.002382] Performance Counters: no PMU driver, software counters only. Sep 30 06:07:35 BrianLinux kernel: [ 0.002390] Checking 'hlt' instruction... OK. Sep 30 06:07:35 BrianLinux kernel: [ 0.017037] SMP alternatives: switching to UP code Sep 30 06:07:35 BrianLinux kernel: [ 0.024007] ACPI: Core revision 20090521 Sep 30 06:07:35 BrianLinux kernel: [ 0.040464] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 Sep 30 06:07:35 BrianLinux kernel: [ 0.082139] CPU0: Intel(R) Celeron(R) M CPU 420 @ 1.60GHz stepping 08 Sep 30 06:07:35 BrianLinux kernel: [ 0.084001] Brought up 1 CPUs Sep 30 06:07:35 BrianLinux kernel: [ 0.084001] Total of 1 processors activated (3192.49 BogoMIPS). Sep 30 06:07:35 BrianLinux kernel: [ 0.084001] CPU0 attaching NULL sched-domain. Sep 30 06:07:35 BrianLinux kernel: [ 0.084001] Booting paravirtualized kernel on bare hardware Sep 30 06:07:35 BrianLinux kernel: [ 0.084001] regulator: core version 0.5 Sep 30 06:07:35 BrianLinux kernel: [ 0.084001] Time: 6:07:18 Date: 09/30/09 Sep 30 06:07:35 BrianLinux kernel: [ 0.084001] NET: Registered protocol family 16 Sep 30 06:07:35 BrianLinux kernel: [ 0.084001] EISA bus registered Sep 30 06:07:35 BrianLinux kernel: [ 0.084001] ACPI: bus type pci registered Sep 30 06:07:35 BrianLinux kernel: [ 0.084001] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255 Sep 30 06:07:35 BrianLinux kernel: [ 0.084001] PCI: MCFG area at e0000000 reserved in E820 Sep 30 06:07:35 BrianLinux kernel: [ 0.084001] PCI: Using MMCONFIG for extended config space Sep 30 06:07:35 BrianLinux kernel: [ 0.084001] PCI: Using configuration type 1 for base access Sep 30 06:07:35 BrianLinux kernel: [ 0.084001] bio: create slab at 0 Sep 30 06:07:35 BrianLinux kernel: [ 0.084001] ACPI: EC: Look up EC in DSDT Sep 30 06:07:35 BrianLinux kernel: [ 0.086117] ACPI: BIOS _OSI(Linux) query ignored Sep 30 06:07:35 BrianLinux kernel: [ 0.086837] ACPI: Interpreter enabled Sep 30 06:07:35 BrianLinux kernel: [ 0.086847] ACPI: (supports S0 S3 S4 S5) Sep 30 06:07:35 BrianLinux kernel: [ 0.086872] ACPI: Using IOAPIC for interrupt routing Sep 30 06:07:35 BrianLinux kernel: [ 0.089425] ACPI: EC: non-query interrupt received, switching to interrupt mode Sep 30 06:07:35 BrianLinux kernel: [ 0.121352] ACPI: EC: GPE storm detected, transactions will use polling mode Sep 30 06:07:35 BrianLinux kernel: [ 0.396639] ACPI: EC: GPE = 0x19, I/O: command/status = 0x66, data = 0x62 Sep 30 06:07:35 BrianLinux kernel: [ 0.396642] ACPI: EC: driver started in poll mode Sep 30 06:07:35 BrianLinux kernel: [ 0.396985] ACPI: No dock devices found. Sep 30 06:07:35 BrianLinux kernel: [ 0.397612] ACPI: PCI Root Bridge [PCI0] (0000:00) Sep 30 06:07:35 BrianLinux kernel: [ 0.397723] pci 0000:00:02.0: reg 10 32bit mmio: [0xd0200000-0xd027ffff] Sep 30 06:07:35 BrianLinux kernel: [ 0.397730] pci 0000:00:02.0: reg 14 io port: [0x1800-0x1807] Sep 30 06:07:35 BrianLinux kernel: [ 0.397737] pci 0000:00:02.0: reg 18 32bit mmio: [0xc0000000-0xcfffffff] Sep 30 06:07:35 BrianLinux kernel: [ 0.397743] pci 0000:00:02.0: reg 1c 32bit mmio: [0xd0300000-0xd033ffff] Sep 30 06:07:35 BrianLinux kernel: [ 0.397791] pci 0000:00:02.1: reg 10 32bit mmio: [0xd0280000-0xd02fffff] Sep 30 06:07:35 BrianLinux kernel: [ 0.397917] pci 0000:00:1b.0: reg 10 64bit mmio: [0xd0340000-0xd0343fff] Sep 30 06:07:35 BrianLinux kernel: [ 0.397982] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold Sep 30 06:07:35 BrianLinux kernel: [ 0.397989] pci 0000:00:1b.0: PME# disabled Sep 30 06:07:35 BrianLinux kernel: [ 0.398087] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold Sep 30 06:07:35 BrianLinux kernel: [ 0.398093] pci 0000:00:1c.0: PME# disabled Sep 30 06:07:35 BrianLinux kernel: [ 0.398190] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold Sep 30 06:07:35 BrianLinux kernel: [ 0.398196] pci 0000:00:1c.2: PME# disabled Sep 30 06:07:35 BrianLinux kernel: [ 0.398269] pci 0000:00:1d.0: reg 20 io port: [0x1820-0x183f] Sep 30 06:07:35 BrianLinux kernel: [ 0.398339] pci 0000:00:1d.1: reg 20 io port: [0x1840-0x185f] Sep 30 06:07:35 BrianLinux kernel: [ 0.398409] pci 0000:00:1d.2: reg 20 io port: [0x1860-0x187f] Sep 30 06:07:35 BrianLinux kernel: [ 0.398485] pci 0000:00:1d.7: reg 10 32bit mmio: [0xd0544000-0xd05443ff] Sep 30 06:07:35 BrianLinux kernel: [ 0.398554] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold Sep 30 06:07:35 BrianLinux kernel: [ 0.398561] pci 0000:00:1d.7: PME# disabled Sep 30 06:07:35 BrianLinux kernel: [ 0.398741] pci 0000:00:1f.0: quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO Sep 30 06:07:35 BrianLinux kernel: [ 0.398746] pci 0000:00:1f.0: quirk: region 1180-11bf claimed by ICH6 GPIO Sep 30 06:07:35 BrianLinux kernel: [ 0.398811] pci 0000:00:1f.1: reg 10 io port: [0x00-0x07] Sep 30 06:07:35 BrianLinux kernel: [ 0.398821] pci 0000:00:1f.1: reg 14 io port: [0x00-0x03] Sep 30 06:07:35 BrianLinux kernel: [ 0.398830] pci 0000:00:1f.1: reg 18 io port: [0x00-0x07] Sep 30 06:07:35 BrianLinux kernel: [ 0.398839] pci 0000:00:1f.1: reg 1c io port: [0x00-0x03] Sep 30 06:07:35 BrianLinux kernel: [ 0.398849] pci 0000:00:1f.1: reg 20 io port: [0x1810-0x181f] Sep 30 06:07:35 BrianLinux kernel: [ 0.398921] pci 0000:00:1f.2: reg 10 io port: [0x18b0-0x18b7] Sep 30 06:07:35 BrianLinux kernel: [ 0.398930] pci 0000:00:1f.2: reg 14 io port: [0x18a4-0x18a7] Sep 30 06:07:35 BrianLinux kernel: [ 0.398939] pci 0000:00:1f.2: reg 18 io port: [0x18a8-0x18af] Sep 30 06:07:35 BrianLinux kernel: [ 0.398949] pci 0000:00:1f.2: reg 1c io port: [0x18a0-0x18a3] Sep 30 06:07:35 BrianLinux kernel: [ 0.398958] pci 0000:00:1f.2: reg 20 io port: [0x1890-0x189f] Sep 30 06:07:35 BrianLinux kernel: [ 0.398967] pci 0000:00:1f.2: reg 24 32bit mmio: [0xd0544400-0xd05447ff] Sep 30 06:07:35 BrianLinux kernel: [ 0.399007] pci 0000:00:1f.2: PME# supported from D3hot Sep 30 06:07:35 BrianLinux kernel: [ 0.399012] pci 0000:00:1f.2: PME# disabled Sep 30 06:07:35 BrianLinux kernel: [ 0.399083] pci 0000:00:1f.3: reg 20 io port: [0x18c0-0x18df] Sep 30 06:07:35 BrianLinux kernel: [ 0.399181] pci 0000:00:1c.0: bridge io port: [0x00-0xfff] Sep 30 06:07:35 BrianLinux kernel: [ 0.399187] pci 0000:00:1c.0: bridge 32bit mmio: [0x000000-0x0fffff] Sep 30 06:07:35 BrianLinux kernel: [ 0.399368] pci 0000:06:00.0: reg 10 32bit mmio: [0xd0000000-0xd0003fff] Sep 30 06:07:35 BrianLinux kernel: [ 0.399657] pci 0000:06:00.0: supports D1 D2 Sep 30 06:07:35 BrianLinux kernel: [ 0.399787] pci 0000:00:1c.2: bridge io port: [0x00-0xfff] Sep 30 06:07:35 BrianLinux kernel: [ 0.399794] pci 0000:00:1c.2: bridge 32bit mmio: [0x000000-0x0fffff] Sep 30 06:07:35 BrianLinux kernel: [ 0.399865] pci 0000:08:08.0: reg 10 io port: [0x2000-0x20ff] Sep 30 06:07:35 BrianLinux kernel: [ 0.399875] pci 0000:08:08.0: reg 14 32bit mmio: [0xd0100000-0xd01000ff] Sep 30 06:07:35 BrianLinux kernel: [ 0.399940] pci 0000:08:08.0: supports D1 D2 Sep 30 06:07:35 BrianLinux kernel: [ 0.399943] pci 0000:08:08.0: PME# supported from D1 D2 D3hot D3cold Sep 30 06:07:35 BrianLinux kernel: [ 0.399949] pci 0000:08:08.0: PME# disabled Sep 30 06:07:35 BrianLinux kernel: [ 0.400008] pci 0000:00:1e.0: transparent bridge Sep 30 06:07:35 BrianLinux kernel: [ 0.400014] pci 0000:00:1e.0: bridge io port: [0x2000-0x2fff] Sep 30 06:07:35 BrianLinux kernel: [ 0.400020] pci 0000:00:1e.0: bridge 32bit mmio: [0xd0100000-0xd01fffff] Sep 30 06:07:35 BrianLinux kernel: [ 0.400049] pci_bus 0000:00: on NUMA node 0 Sep 30 06:07:35 BrianLinux kernel: [ 0.400055] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] Sep 30 06:07:35 BrianLinux kernel: [ 0.400334] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT] Sep 30 06:07:35 BrianLinux kernel: [ 0.400429] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT] Sep 30 06:07:35 BrianLinux kernel: [ 0.400545] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT] Sep 30 06:07:35 BrianLinux kernel: [ 0.403671] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 14 15) *11 Sep 30 06:07:35 BrianLinux kernel: [ 0.403796] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 *4 5 6 7 11 12 14 15) Sep 30 06:07:35 BrianLinux kernel: [ 0.403918] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 *3 4 5 6 7 10 12 14 15) Sep 30 06:07:35 BrianLinux kernel: [ 0.404051] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *10 Sep 30 06:07:35 BrianLinux kernel: [ 0.404173] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled. Sep 30 06:07:35 BrianLinux kernel: [ 0.404294] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled. Sep 30 06:07:35 BrianLinux kernel: [ 0.404415] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 *7 10 12 14 15) Sep 30 06:07:35 BrianLinux kernel: [ 0.404534] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 *5 6 7 11 12 14 15) Sep 30 06:07:35 BrianLinux kernel: [ 0.404762] SCSI subsystem initialized Sep 30 06:07:35 BrianLinux kernel: [ 0.404821] libata version 3.00 loaded. Sep 30 06:07:35 BrianLinux kernel: [ 0.404909] usbcore: registered new interface driver usbfs Sep 30 06:07:35 BrianLinux kernel: [ 0.404934] usbcore: registered new interface driver hub Sep 30 06:07:35 BrianLinux kernel: [ 0.404964] usbcore: registered new device driver usb Sep 30 06:07:35 BrianLinux kernel: [ 0.405151] ACPI: WMI: Mapper loaded Sep 30 06:07:35 BrianLinux kernel: [ 0.405154] PCI: Using ACPI for IRQ routing Sep 30 06:07:35 BrianLinux kernel: [ 0.405158] pci 0000:00:1c.0: BAR 13: can't allocate resource Sep 30 06:07:35 BrianLinux kernel: [ 0.405161] pci 0000:00:1c.0: BAR 14: can't allocate resource Sep 30 06:07:35 BrianLinux kernel: [ 0.405165] pci 0000:00:1c.2: BAR 13: can't allocate resource Sep 30 06:07:35 BrianLinux kernel: [ 0.405167] pci 0000:00:1c.2: BAR 14: can't allocate resource Sep 30 06:07:35 BrianLinux kernel: [ 0.405212] pci 0000:06:00.0: BAR 0: no parent found for of device [0xd0000000-0xd0003fff] Sep 30 06:07:35 BrianLinux kernel: [ 0.405269] pci 0000:06:00.0: BAR 0: can't allocate resource Sep 30 06:07:35 BrianLinux kernel: [ 0.405415] Bluetooth: Core ver 2.15 Sep 30 06:07:35 BrianLinux kernel: [ 0.405450] NET: Registered protocol family 31 Sep 30 06:07:35 BrianLinux kernel: [ 0.405452] Bluetooth: HCI device and connection manager initialized Sep 30 06:07:35 BrianLinux kernel: [ 0.405456] Bluetooth: HCI socket layer initialized Sep 30 06:07:35 BrianLinux kernel: [ 0.405458] NetLabel: Initializing Sep 30 06:07:35 BrianLinux kernel: [ 0.405461] NetLabel: domain hash size = 128 Sep 30 06:07:35 BrianLinux kernel: [ 0.405463] NetLabel: protocols = UNLABELED CIPSOv4 Sep 30 06:07:35 BrianLinux kernel: [ 0.405480] NetLabel: unlabeled traffic allowed by default Sep 30 06:07:35 BrianLinux kernel: [ 0.405524] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 Sep 30 06:07:35 BrianLinux kernel: [ 0.405531] hpet0: 3 comparators, 64-bit 14.318180 MHz counter Sep 30 06:07:35 BrianLinux kernel: [ 0.409977] pnp: PnP ACPI init Sep 30 06:07:35 BrianLinux kernel: [ 0.410003] ACPI: bus type pnp registered Sep 30 06:07:35 BrianLinux kernel: [ 0.484580] pnp: PnP ACPI: found 10 devices Sep 30 06:07:35 BrianLinux kernel: [ 0.484583] ACPI: ACPI bus type pnp unregistered Sep 30 06:07:35 BrianLinux kernel: [ 0.484589] PnPBIOS: Disabled by ACPI PNP Sep 30 06:07:35 BrianLinux kernel: [ 0.484603] system 00:01: iomem range 0xe0000000-0xefffffff has been reserved Sep 30 06:07:35 BrianLinux kernel: [ 0.484607] system 00:01: iomem range 0xfed14000-0xfed17fff has been reserved Sep 30 06:07:35 BrianLinux kernel: [ 0.484611] system 00:01: iomem range 0xfed18000-0xfed18fff has been reserved Sep 30 06:07:35 BrianLinux kernel: [ 0.484615] system 00:01: iomem range 0xfed19000-0xfed19fff has been reserved Sep 30 06:07:35 BrianLinux kernel: [ 0.484619] system 00:01: iomem range 0xfed1c000-0xfed1ffff has been reserved Sep 30 06:07:35 BrianLinux kernel: [ 0.484624] system 00:01: iomem range 0xfed20000-0xfed3ffff has been reserved Sep 30 06:07:35 BrianLinux kernel: [ 0.484628] system 00:01: iomem range 0xfed40000-0xfed44fff has been reserved Sep 30 06:07:35 BrianLinux kernel: [ 0.484632] system 00:01: iomem range 0xfed45000-0xfed8ffff has been reserved Sep 30 06:07:35 BrianLinux kernel: [ 0.484644] system 00:04: iomem range 0xfed00000-0xfed003ff has been reserved Sep 30 06:07:35 BrianLinux kernel: [ 0.484652] system 00:06: ioport range 0x800-0x80f has been reserved Sep 30 06:07:35 BrianLinux kernel: [ 0.484656] system 00:06: ioport range 0x1000-0x107f has been reserved Sep 30 06:07:35 BrianLinux kernel: [ 0.484660] system 00:06: ioport range 0x1180-0x11bf has been reserved Sep 30 06:07:35 BrianLinux kernel: [ 0.484663] system 00:06: ioport range 0x1640-0x164f has been reserved Sep 30 06:07:35 BrianLinux kernel: [ 0.503994] Switched to high resolution mode on CPU 0 Sep 30 06:07:35 BrianLinux kernel: [ 0.519369] AppArmor: AppArmor Filesystem Enabled Sep 30 06:07:35 BrianLinux kernel: [ 0.519428] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:01 Sep 30 06:07:35 BrianLinux kernel: [ 0.519431] pci 0000:00:1c.0: IO window: disabled Sep 30 06:07:35 BrianLinux kernel: [ 0.519438] pci 0000:00:1c.0: MEM window: disabled Sep 30 06:07:35 BrianLinux kernel: [ 0.519444] pci 0000:00:1c.0: PREFETCH window: disabled Sep 30 06:07:35 BrianLinux kernel: [ 0.519463] pci 0000:00:1c.2: PCI bridge, secondary bus 0000:06 Sep 30 06:07:35 BrianLinux kernel: [ 0.519466] pci 0000:00:1c.2: IO window: disabled Sep 30 06:07:35 BrianLinux kernel: [ 0.519474] pci 0000:00:1c.2: MEM window: 0x80000000-0x800fffff Sep 30 06:07:35 BrianLinux kernel: [ 0.519479] pci 0000:00:1c.2: PREFETCH window: disabled Sep 30 06:07:35 BrianLinux kernel: [ 0.519485] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:08 Sep 30 06:07:35 BrianLinux kernel: [ 0.519490] pci 0000:00:1e.0: IO window: 0x2000-0x2fff Sep 30 06:07:35 BrianLinux kernel: [ 0.519497] pci 0000:00:1e.0: MEM window: 0xd0100000-0xd01fffff Sep 30 06:07:35 BrianLinux kernel: [ 0.519503] pci 0000:00:1e.0: PREFETCH window: disabled Sep 30 06:07:35 BrianLinux kernel: [ 0.519520] alloc irq_desc for 17 on node -1 Sep 30 06:07:35 BrianLinux kernel: [ 0.519523] alloc kstat_irqs on node -1 Sep 30 06:07:35 BrianLinux kernel: [ 0.519530] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 Sep 30 06:07:35 BrianLinux kernel: [ 0.519539] pci 0000:00:1c.0: setting latency timer to 64 Sep 30 06:07:35 BrianLinux kernel: [ 0.519549] pci 0000:00:1c.2: enabling device (0100 -> 0102) Sep 30 06:07:35 BrianLinux kernel: [ 0.519554] alloc irq_desc for 18 on node -1 Sep 30 06:07:35 BrianLinux kernel: [ 0.519556] alloc kstat_irqs on node -1 Sep 30 06:07:35 BrianLinux kernel: [ 0.519560] pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 Sep 30 06:07:35 BrianLinux kernel: [ 0.519569] pci 0000:00:1c.2: setting latency timer to 64 Sep 30 06:07:35 BrianLinux kernel: [ 0.519578] pci 0000:00:1e.0: setting latency timer to 64 Sep 30 06:07:35 BrianLinux kernel: [ 0.519585] pci_bus 0000:00: resource 0 io: [0x00-0xffff] Sep 30 06:07:35 BrianLinux kernel: [ 0.519588] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff] Sep 30 06:07:35 BrianLinux kernel: [ 0.519592] pci_bus 0000:01: resource 0 mem: [0x0-0xfff] Sep 30 06:07:35 BrianLinux kernel: [ 0.519595] pci_bus 0000:01: resource 1 mem: [0x0-0xfffff] Sep 30 06:07:35 BrianLinux kernel: [ 0.519599] pci_bus 0000:06: resource 0 mem: [0x0-0xfff] Sep 30 06:07:35 BrianLinux kernel: [ 0.519602] pci_bus 0000:06: resource 1 mem: [0x80000000-0x800fffff] Sep 30 06:07:35 BrianLinux kernel: [ 0.519606] pci_bus 0000:08: resource 0 io: [0x2000-0x2fff] Sep 30 06:07:35 BrianLinux kernel: [ 0.519609] pci_bus 0000:08: resource 1 mem: [0xd0100000-0xd01fffff] Sep 30 06:07:35 BrianLinux kernel: [ 0.519613] pci_bus 0000:08: resource 3 io: [0x00-0xffff] Sep 30 06:07:35 BrianLinux kernel: [ 0.519616] pci_bus 0000:08: resource 4 mem: [0x000000-0xffffffff] Sep 30 06:07:35 BrianLinux kernel: [ 0.519662] NET: Registered protocol family 2 Sep 30 06:07:35 BrianLinux kernel: [ 0.519770] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) Sep 30 06:07:35 BrianLinux kernel: [ 0.520154] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) Sep 30 06:07:35 BrianLinux kernel: [ 0.521067] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) Sep 30 06:07:35 BrianLinux kernel: [ 0.521575] TCP: Hash tables configured (established 131072 bind 65536) Sep 30 06:07:35 BrianLinux kernel: [ 0.521579] TCP reno registered Sep 30 06:07:35 BrianLinux kernel: [ 0.521710] NET: Registered protocol family 1 Sep 30 06:07:35 BrianLinux kernel: [ 0.521791] Trying to unpack rootfs image as initramfs... Sep 30 06:07:35 BrianLinux kernel: [ 0.745921] Freeing initrd memory: 6634k freed Sep 30 06:07:35 BrianLinux kernel: [ 0.750556] Simple Boot Flag at 0x36 set to 0x1 Sep 30 06:07:35 BrianLinux kernel: [ 0.750661] cpufreq-nforce2: No nForce2 chipset. Sep 30 06:07:35 BrianLinux kernel: [ 0.750706] Scanning for low memory corruption every 60 seconds Sep 30 06:07:35 BrianLinux kernel: [ 0.750892] audit: initializing netlink socket (disabled) Sep 30 06:07:35 BrianLinux kernel: [ 0.750914] type=2000 audit(1254290838.748:1): initialized Sep 30 06:07:35 BrianLinux kernel: [ 0.761821] highmem bounce pool size: 64 pages Sep 30 06:07:35 BrianLinux kernel: [ 0.761829] HugeTLB registered 4 MB page size, pre-allocated 0 pages Sep 30 06:07:35 BrianLinux kernel: [ 0.763592] VFS: Disk quotas dquot_6.5.2 Sep 30 06:07:35 BrianLinux kernel: [ 0.763665] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) Sep 30 06:07:35 BrianLinux kernel: [ 0.764355] fuse init (API version 7.12) Sep 30 06:07:35 BrianLinux kernel: [ 0.764458] msgmni has been set to 1706 Sep 30 06:07:35 BrianLinux kernel: [ 0.764695] alg: No test for stdrng (krng) Sep 30 06:07:35 BrianLinux kernel: [ 0.764712] io scheduler noop registered Sep 30 06:07:35 BrianLinux kernel: [ 0.764715] io scheduler anticipatory registered Sep 30 06:07:35 BrianLinux kernel: [ 0.764717] io scheduler deadline registered (default) Sep 30 06:07:35 BrianLinux kernel: [ 0.764770] io scheduler cfq registered Sep 30 06:07:35 BrianLinux kernel: [ 0.764786] pci 0000:00:02.0: Boot video device Sep 30 06:07:35 BrianLinux kernel: [ 2.364009] pci 0000:00:1d.7: EHCI: BIOS handoff failed (BIOS bug?) 01010001 Sep 30 06:07:35 BrianLinux kernel: [ 2.364278] alloc irq_desc for 24 on node -1 Sep 30 06:07:35 BrianLinux kernel: [ 2.364281] alloc kstat_irqs on node -1 Sep 30 06:07:35 BrianLinux kernel: [ 2.364297] pcieport-driver 0000:00:1c.0: irq 24 for MSI/MSI-X Sep 30 06:07:35 BrianLinux kernel: [ 2.364311] pcieport-driver 0000:00:1c.0: setting latency timer to 64 Sep 30 06:07:35 BrianLinux kernel: [ 2.364482] alloc irq_desc for 25 on node -1 Sep 30 06:07:35 BrianLinux kernel: [ 2.364485] alloc kstat_irqs on node -1 Sep 30 06:07:35 BrianLinux kernel: [ 2.364494] pcieport-driver 0000:00:1c.2: irq 25 for MSI/MSI-X Sep 30 06:07:35 BrianLinux kernel: [ 2.364506] pcieport-driver 0000:00:1c.2: setting latency timer to 64 Sep 30 06:07:35 BrianLinux kernel: [ 2.364625] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 Sep 30 06:07:35 BrianLinux kernel: [ 2.364723] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 Sep 30 06:07:35 BrianLinux kernel: [ 2.420071] ACPI: AC Adapter [ACAD] (off-line) Sep 30 06:07:35 BrianLinux kernel: [ 2.420164] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0 Sep 30 06:07:35 BrianLinux kernel: [ 2.420169] ACPI: Power Button [PWRF] Sep 30 06:07:35 BrianLinux kernel: [ 2.420229] input: Sleep Button as /devices/LNXSYSTM:00/LNXSLPBN:00/input/input1 Sep 30 06:07:35 BrianLinux kernel: [ 2.420233] ACPI: Sleep Button [SLPF] Sep 30 06:07:35 BrianLinux kernel: [ 2.420243] ACPI Error: Could not enable SleepButton event 20090521 evxfevnt-193 Sep 30 06:07:35 BrianLinux kernel: [ 2.420249] ACPI Warning: Could not enable fixed event 3 20090521 evxface-146 Sep 30 06:07:35 BrianLinux kernel: [ 2.420299] button: probe of LNXSLPBN:00 failed with error -22 Sep 30 06:07:35 BrianLinux kernel: [ 2.420348] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input2 Sep 30 06:07:35 BrianLinux kernel: [ 2.420393] ACPI: Lid Switch [LID] Sep 30 06:07:35 BrianLinux kernel: [ 2.420448] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input3 Sep 30 06:07:35 BrianLinux kernel: [ 2.420451] ACPI: Power Button [PWRB] Sep 30 06:07:35 BrianLinux kernel: [ 2.421246] Marking TSC unstable due to TSC halts in idle Sep 30 06:07:35 BrianLinux kernel: [ 2.421271] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3]) Sep 30 06:07:35 BrianLinux kernel: [ 2.421300] processor LNXCPU:00: registered as cooling_device0 Sep 30 06:07:35 BrianLinux kernel: [ 2.421305] ACPI: Processor [CPU0] (supports 8 throttling states) Sep 30 06:07:35 BrianLinux kernel: [ 2.680082] thermal LNXTHERM:01: registered as thermal_zone0 Sep 30 06:07:35 BrianLinux kernel: [ 2.680092] ACPI: Thermal Zone [TZ01] (32 C) Sep 30 06:07:35 BrianLinux kernel: [ 2.680257] thermal LNXTHERM:02: registered as thermal_zone1 Sep 30 06:07:35 BrianLinux kernel: [ 2.680266] ACPI: Thermal Zone [TZ02] (27 C) Sep 30 06:07:35 BrianLinux kernel: [ 2.680443] isapnp: Scanning for PnP cards... Sep 30 06:07:35 BrianLinux kernel: [ 3.034581] isapnp: No Plug & Play device found Sep 30 06:07:35 BrianLinux kernel: [ 3.204167] ACPI: Battery Slot [BAT1] (battery present) Sep 30 06:07:35 BrianLinux kernel: [ 3.204368] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled Sep 30 06:07:35 BrianLinux kernel: [ 3.205920] brd: module loaded Sep 30 06:07:35 BrianLinux kernel: [ 3.206467] loop: module loaded Sep 30 06:07:35 BrianLinux kernel: [ 3.206558] input: Macintosh mouse button emulation as /devices/virtual/input/input4 Sep 30 06:07:35 BrianLinux kernel: [ 3.206645] ahci 0000:00:1f.2: version 3.0 Sep 30 06:07:35 BrianLinux kernel: [ 3.206664] alloc irq_desc for 19 on node -1 Sep 30 06:07:35 BrianLinux kernel: [ 3.206667] alloc kstat_irqs on node -1 Sep 30 06:07:35 BrianLinux kernel: [ 3.206676] ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19 Sep 30 06:07:35 BrianLinux kernel: [ 3.206719] alloc irq_desc for 26 on node -1 Sep 30 06:07:35 BrianLinux kernel: [ 3.206722] alloc kstat_irqs on node -1 Sep 30 06:07:35 BrianLinux kernel: [ 3.206734] ahci 0000:00:1f.2: irq 26 for MSI/MSI-X Sep 30 06:07:35 BrianLinux kernel: [ 3.206820] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 4 ports 1.5 Gbps 0x1 impl SATA mode Sep 30 06:07:35 BrianLinux kernel: [ 3.206825] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part Sep 30 06:07:35 BrianLinux kernel: [ 3.206831] ahci 0000:00:1f.2: setting latency timer to 64 Sep 30 06:07:35 BrianLinux kernel: [ 3.206977] scsi0 : ahci Sep 30 06:07:35 BrianLinux kernel: [ 3.207099] scsi1 : ahci Sep 30 06:07:35 BrianLinux kernel: [ 3.207160] scsi2 : ahci Sep 30 06:07:35 BrianLinux kernel: [ 3.207223] scsi3 : ahci Sep 30 06:07:35 BrianLinux kernel: [ 3.207353] ata1: SATA max UDMA/133 abar m1024@0xd0544400 port 0xd0544500 irq 26 Sep 30 06:07:35 BrianLinux kernel: [ 3.207357] ata2: DUMMY Sep 30 06:07:35 BrianLinux kernel: [ 3.207359] ata3: DUMMY Sep 30 06:07:35 BrianLinux kernel: [ 3.207361] ata4: DUMMY Sep 30 06:07:35 BrianLinux kernel: [ 3.207453] ata_piix 0000:00:1f.1: version 2.13 Sep 30 06:07:35 BrianLinux kernel: [ 3.207469] ata_piix 0000:00:1f.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 Sep 30 06:07:35 BrianLinux kernel: [ 3.207512] ata_piix 0000:00:1f.1: setting latency timer to 64 Sep 30 06:07:35 BrianLinux kernel: [ 3.207619] scsi4 : ata_piix Sep 30 06:07:35 BrianLinux kernel: [ 3.207711] scsi5 : ata_piix Sep 30 06:07:35 BrianLinux kernel: [ 3.208397] ata5: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x1810 irq 14 Sep 30 06:07:35 BrianLinux kernel: [ 3.208401] ata6: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x1818 irq 15 Sep 30 06:07:35 BrianLinux kernel: [ 3.209360] Fixed MDIO Bus: probed Sep 30 06:07:35 BrianLinux kernel: [ 3.209403] PPP generic driver version 2.4.2 Sep 30 06:07:35 BrianLinux kernel: [ 3.209529] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver Sep 30 06:07:35 BrianLinux kernel: [ 3.209555] alloc irq_desc for 23 on node -1 Sep 30 06:07:35 BrianLinux kernel: [ 3.209558] alloc kstat_irqs on node -1 Sep 30 06:07:35 BrianLinux kernel: [ 3.209566] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23 Sep 30 06:07:35 BrianLinux kernel: [ 3.209583] ehci_hcd 0000:00:1d.7: setting latency timer to 64 Sep 30 06:07:35 BrianLinux kernel: [ 3.209588] ehci_hcd 0000:00:1d.7: EHCI Host Controller Sep 30 06:07:35 BrianLinux kernel: [ 3.209655] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1 Sep 30 06:07:35 BrianLinux kernel: [ 3.213591] ehci_hcd 0000:00:1d.7: debug port 1 Sep 30 06:07:35 BrianLinux kernel: [ 3.213600] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported Sep 30 06:07:35 BrianLinux kernel: [ 3.213630] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xd0544000 Sep 30 06:07:35 BrianLinux kernel: [ 3.217764] ata6: port disabled. ignoring. Sep 30 06:07:35 BrianLinux kernel: [ 3.228016] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 Sep 30 06:07:35 BrianLinux kernel: [ 3.228114] usb usb1: configuration #1 chosen from 1 choice Sep 30 06:07:35 BrianLinux kernel: [ 3.228152] hub 1-0:1.0: USB hub found Sep 30 06:07:35 BrianLinux kernel: [ 3.228163] hub 1-0:1.0: 6 ports detected Sep 30 06:07:35 BrianLinux kernel: [ 3.228240] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver Sep 30 06:07:35 BrianLinux kernel: [ 3.228261] uhci_hcd: USB Universal Host Controller Interface driver Sep 30 06:07:35 BrianLinux kernel: [ 3.228308] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 Sep 30 06:07:35 BrianLinux kernel: [ 3.228318] uhci_hcd 0000:00:1d.0: setting latency timer to 64 Sep 30 06:07:35 BrianLinux kernel: [ 3.228322] uhci_hcd 0000:00:1d.0: UHCI Host Controller Sep 30 06:07:35 BrianLinux kernel: [ 3.228364] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 Sep 30 06:07:35 BrianLinux kernel: [ 3.228394] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001820 Sep 30 06:07:35 BrianLinux kernel: [ 3.228488] usb usb2: configuration #1 chosen from 1 choice Sep 30 06:07:35 BrianLinux kernel: [ 3.228524] hub 2-0:1.0: USB hub found Sep 30 06:07:35 BrianLinux kernel: [ 3.228532] hub 2-0:1.0: 2 ports detected Sep 30 06:07:35 BrianLinux kernel: [ 3.228597] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 Sep 30 06:07:35 BrianLinux kernel: [ 3.228605] uhci_hcd 0000:00:1d.1: setting latency timer to 64 Sep 30 06:07:35 BrianLinux kernel: [ 3.228609] uhci_hcd 0000:00:1d.1: UHCI Host Controller Sep 30 06:07:35 BrianLinux kernel: [ 3.228644] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 Sep 30 06:07:35 BrianLinux kernel: [ 3.228683] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00001840 Sep 30 06:07:35 BrianLinux kernel: [ 3.228770] usb usb3: configuration #1 chosen from 1 choice Sep 30 06:07:35 BrianLinux kernel: [ 3.228800] hub 3-0:1.0: USB hub found Sep 30 06:07:35 BrianLinux kernel: [ 3.228808] hub 3-0:1.0: 2 ports detected Sep 30 06:07:35 BrianLinux kernel: [ 3.228867] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 Sep 30 06:07:35 BrianLinux kernel: [ 3.228875] uhci_hcd 0000:00:1d.2: setting latency timer to 64 Sep 30 06:07:35 BrianLinux kernel: [ 3.228879] uhci_hcd 0000:00:1d.2: UHCI Host Controller Sep 30 06:07:35 BrianLinux kernel: [ 3.228913] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 Sep 30 06:07:35 BrianLinux kernel: [ 3.228952] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001860 Sep 30 06:07:35 BrianLinux kernel: [ 3.229046] usb usb4: configuration #1 chosen from 1 choice Sep 30 06:07:35 BrianLinux kernel: [ 3.229077] hub 4-0:1.0: USB hub found Sep 30 06:07:35 BrianLinux kernel: [ 3.229084] hub 4-0:1.0: 2 ports detected Sep 30 06:07:35 BrianLinux kernel: [ 3.229201] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 Sep 30 06:07:35 BrianLinux kernel: [ 3.248435] i8042.c: Detected active multiplexing controller, rev 1.1. Sep 30 06:07:35 BrianLinux kernel: [ 3.265063] serio: i8042 KBD port at 0x60,0x64 irq 1 Sep 30 06:07:35 BrianLinux kernel: [ 3.265070] serio: i8042 AUX0 port at 0x60,0x64 irq 12 Sep 30 06:07:35 BrianLinux kernel: [ 3.265101] serio: i8042 AUX1 port at 0x60,0x64 irq 12 Sep 30 06:07:35 BrianLinux kernel: [ 3.265131] serio: i8042 AUX2 port at 0x60,0x64 irq 12 Sep 30 06:07:35 BrianLinux kernel: [ 3.265158] serio: i8042 AUX3 port at 0x60,0x64 irq 12 Sep 30 06:07:35 BrianLinux kernel: [ 3.265266] mice: PS/2 mouse device common for all mice Sep 30 06:07:35 BrianLinux kernel: [ 3.266560] rtc_cmos 00:09: RTC can wake from S4 Sep 30 06:07:35 BrianLinux kernel: [ 3.266603] rtc_cmos 00:09: rtc core: registered rtc_cmos as rtc0 Sep 30 06:07:35 BrianLinux kernel: [ 3.266638] rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs Sep 30 06:07:35 BrianLinux kernel: [ 3.266769] device-mapper: uevent: version 1.0.3 Sep 30 06:07:35 BrianLinux kernel: [ 3.266879] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com Sep 30 06:07:35 BrianLinux kernel: [ 3.266939] device-mapper: multipath: version 1.1.0 loaded Sep 30 06:07:35 BrianLinux kernel: [ 3.266943] device-mapper: multipath round-robin: version 1.0.0 loaded Sep 30 06:07:35 BrianLinux kernel: [ 3.267087] EISA: Probing bus 0 at eisa.0 Sep 30 06:07:35 BrianLinux kernel: [ 3.267097] Cannot allocate resource for EISA slot 1 Sep 30 06:07:35 BrianLinux kernel: [ 3.267100] Cannot allocate resource for EISA slot 2 Sep 30 06:07:35 BrianLinux kernel: [ 3.267128] EISA: Detected 0 cards. Sep 30 06:07:35 BrianLinux kernel: [ 3.267223] cpuidle: using governor ladder Sep 30 06:07:35 BrianLinux kernel: [ 3.267295] cpuidle: using governor menu Sep 30 06:07:35 BrianLinux kernel: [ 3.267859] TCP cubic registered Sep 30 06:07:35 BrianLinux kernel: [ 3.268083] NET: Registered protocol family 10 Sep 30 06:07:35 BrianLinux kernel: [ 3.268582] lo: Disabled Privacy Extensions Sep 30 06:07:35 BrianLinux kernel: [ 3.268936] NET: Registered protocol family 17 Sep 30 06:07:35 BrianLinux kernel: [ 3.268956] Bluetooth: L2CAP ver 2.13 Sep 30 06:07:35 BrianLinux kernel: [ 3.268958] Bluetooth: L2CAP socket layer initialized Sep 30 06:07:35 BrianLinux kernel: [ 3.268962] Bluetooth: SCO (Voice Link) ver 0.6 Sep 30 06:07:35 BrianLinux kernel: [ 3.268964] Bluetooth: SCO socket layer initialized Sep 30 06:07:35 BrianLinux kernel: [ 3.268999] Bluetooth: RFCOMM TTY layer initialized Sep 30 06:07:35 BrianLinux kernel: [ 3.269003] Bluetooth: RFCOMM socket layer initialized Sep 30 06:07:35 BrianLinux kernel: [ 3.269005] Bluetooth: RFCOMM ver 1.11 Sep 30 06:07:35 BrianLinux kernel: [ 3.269031] Using IPI No-Shortcut mode Sep 30 06:07:35 BrianLinux kernel: [ 3.269112] PM: Resume from disk failed. Sep 30 06:07:35 BrianLinux kernel: [ 3.269136] registered taskstats version 1 Sep 30 06:07:35 BrianLinux kernel: [ 3.269260] Magic number: 9:970:115 Sep 30 06:07:35 BrianLinux kernel: [ 3.269372] rtc_cmos 00:09: setting system clock to 2009-09-30 06:07:21 UTC (1254290841) Sep 30 06:07:35 BrianLinux kernel: [ 3.269376] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found Sep 30 06:07:35 BrianLinux kernel: [ 3.269378] EDD information not available. Sep 30 06:07:35 BrianLinux kernel: [ 3.280408] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input5 Sep 30 06:07:35 BrianLinux kernel: [ 3.396449] ata5.00: ATAPI: TSSTcorpCDW/DVD TS-L462D, HS00, max MWDMA2 Sep 30 06:07:35 BrianLinux kernel: [ 3.444349] ata5.00: configured for MWDMA2 Sep 30 06:07:35 BrianLinux kernel: [ 3.500040] Clocksource tsc unstable (delta = -143991441 ns) Sep 30 06:07:35 BrianLinux kernel: [ 3.524065] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) Sep 30 06:07:35 BrianLinux kernel: [ 3.525709] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 filtered out Sep 30 06:07:35 BrianLinux kernel: [ 3.570380] ata1.00: ATA-8: WDC WD3200BEVT-22ZCT0, 11.01A11, max UDMA/133 Sep 30 06:07:35 BrianLinux kernel: [ 3.570384] ata1.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32) Sep 30 06:07:35 BrianLinux kernel: [ 3.572986] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 filtered out Sep 30 06:07:35 BrianLinux kernel: [ 3.573148] ata1.00: configured for UDMA/133 Sep 30 06:07:35 BrianLinux kernel: [ 3.588182] scsi 0:0:0:0: Direct-Access ATA WDC WD3200BEVT-2 11.0 PQ: 0 ANSI: 5 Sep 30 06:07:35 BrianLinux kernel: [ 3.588348] sd 0:0:0:0: Attached scsi generic sg0 type 0 Sep 30 06:07:35 BrianLinux kernel: [ 3.588397] sd 0:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB) Sep 30 06:07:35 BrianLinux kernel: [ 3.588455] sd 0:0:0:0: [sda] Write Protect is off Sep 30 06:07:35 BrianLinux kernel: [ 3.588459] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 Sep 30 06:07:35 BrianLinux kernel: [ 3.588489] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA Sep 30 06:07:35 BrianLinux kernel: [ 3.588643] sda: sda1 sda2 sda3 < sda5 > sda4 Sep 30 06:07:35 BrianLinux kernel: [ 3.622147] scsi 4:0:0:0: CD-ROM TSSTcorp CDW/DVD TS-L462D HS00 PQ: 0 ANSI: 5 Sep 30 06:07:35 BrianLinux kernel: [ 3.647118] sd 0:0:0:0: [sda] Attached SCSI disk Sep 30 06:07:35 BrianLinux kernel: [ 3.717414] sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray Sep 30 06:07:35 BrianLinux kernel: [ 3.717418] Uniform CD-ROM driver Revision: 3.20 Sep 30 06:07:35 BrianLinux kernel: [ 3.717501] sr 4:0:0:0: Attached scsi CD-ROM sr0 Sep 30 06:07:35 BrianLinux kernel: [ 3.717555] sr 4:0:0:0: Attached scsi generic sg1 type 5 Sep 30 06:07:35 BrianLinux kernel: [ 3.717584] Freeing unused kernel memory: 540k freed Sep 30 06:07:35 BrianLinux kernel: [ 3.717923] Write protecting the kernel text: 4544k Sep 30 06:07:35 BrianLinux kernel: [ 3.717968] Write protecting the kernel read-only data: 1828k Sep 30 06:07:35 BrianLinux kernel: [ 4.134299] <6>8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004) Sep 30 06:07:35 BrianLinux kernel: [ 4.134338] 8139cp 0000:08:08.0: This (id 10ec:8139 rev 10) is not an 8139C+ compatible chip, use 8139too Sep 30 06:07:35 BrianLinux kernel: [ 4.138155] 8139too Fast Ethernet driver 0.9.28 Sep 30 06:07:35 BrianLinux kernel: [ 4.138190] 8139too 0000:08:08.0: enabling device (0105 -> 0107) Sep 30 06:07:35 BrianLinux kernel: [ 4.138202] alloc irq_desc for 16 on node -1 Sep 30 06:07:35 BrianLinux kernel: [ 4.138205] alloc kstat_irqs on node -1 Sep 30 06:07:35 BrianLinux kernel: [ 4.138215] 8139too 0000:08:08.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 Sep 30 06:07:35 BrianLinux kernel: [ 4.139619] eth0: RealTek RTL8139 at 0x2000, 00:16:d4:45:6a:b6, IRQ 16 Sep 30 06:07:35 BrianLinux kernel: [ 4.586967] PM: Starting manual resume from disk Sep 30 06:07:35 BrianLinux kernel: [ 4.586973] PM: Resume from partition 8:4 Sep 30 06:07:35 BrianLinux kernel: [ 4.586975] PM: Checking hibernation image. Sep 30 06:07:35 BrianLinux kernel: [ 4.587162] PM: Resume from disk failed. Sep 30 06:07:35 BrianLinux kernel: [ 4.629640] EXT4-fs (sda1): barriers enabled Sep 30 06:07:35 BrianLinux kernel: [ 4.646543] kjournald2 starting: pid 287, dev sda1:8, commit interval 5 seconds Sep 30 06:07:35 BrianLinux kernel: [ 4.646558] EXT4-fs (sda1): delayed allocation enabled Sep 30 06:07:35 BrianLinux kernel: [ 4.646563] EXT4-fs: file extents enabled Sep 30 06:07:35 BrianLinux kernel: [ 4.650781] EXT4-fs: mballoc enabled Sep 30 06:07:35 BrianLinux kernel: [ 4.650800] EXT4-fs (sda1): mounted filesystem with ordered data mode Sep 30 06:07:35 BrianLinux kernel: [ 5.478411] type=1505 audit(1254290843.708:2): operation="profile_load" pid=307 name=/usr/sbin/tcpdump Sep 30 06:07:35 BrianLinux kernel: [ 5.481694] type=1505 audit(1254290843.710:3): operation="profile_load" pid=308 name=/sbin/dhclient3 Sep 30 06:07:35 BrianLinux kernel: [ 5.482482] type=1505 audit(1254290843.710:4): operation="profile_load" pid=308 name=/usr/lib/NetworkManager/nm-dhcp-client.action Sep 30 06:07:35 BrianLinux kernel: [ 5.482926] type=1505 audit(1254290843.710:5): operation="profile_load" pid=308 name=/usr/lib/connman/scripts/dhclient-script Sep 30 06:07:35 BrianLinux kernel: [ 5.485202] type=1505 audit(1254290843.714:6): operation="profile_load" pid=309 name=/usr/sbin/mysqld-akonadi Sep 30 06:07:35 BrianLinux kernel: [ 5.502400] type=1505 audit(1254290843.730:7): operation="profile_load" pid=311 name=/usr/lib/cups/backend/cups-pdf Sep 30 06:07:35 BrianLinux kernel: [ 5.503362] type=1505 audit(1254290843.730:8): operation="profile_load" pid=311 name=/usr/sbin/cupsd Sep 30 06:07:35 BrianLinux kernel: [ 11.523509] udev: starting version 147 Sep 30 06:07:35 BrianLinux kernel: [ 11.911229] lp: driver loaded but no devices found Sep 30 06:07:35 BrianLinux kernel: [ 11.931338] lib80211: common routines for IEEE802.11 drivers Sep 30 06:07:35 BrianLinux kernel: [ 11.931343] lib80211_crypt: registered algorithm 'NULL' Sep 30 06:07:35 BrianLinux kernel: [ 11.935544] wl: module license 'MIXED/Proprietary' taints kernel. Sep 30 06:07:35 BrianLinux kernel: [ 11.935551] Disabling lock debugging due to kernel taint Sep 30 06:07:35 BrianLinux kernel: [ 11.939034] wl 0000:06:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 Sep 30 06:07:35 BrianLinux kernel: [ 11.939054] wl 0000:06:00.0: setting latency timer to 64 Sep 30 06:07:35 BrianLinux kernel: [ 11.954193] Linux agpgart interface v0.103 Sep 30 06:07:35 BrianLinux kernel: [ 11.957511] intel_rng: FWH not detected Sep 30 06:07:35 BrianLinux kernel: [ 11.984401] lib80211_crypt: registered algorithm 'TKIP' Sep 30 06:07:35 BrianLinux kernel: [ 11.984566] eth1: Broadcom BCM4311 802.11 Wireless Controller 5.10.91.9 Sep 30 06:07:35 BrianLinux kernel: [ 12.182989] agpgart-intel 0000:00:00.0: Intel 945GM Chipset Sep 30 06:07:35 BrianLinux kernel: [ 12.183376] agpgart-intel 0000:00:00.0: detected 7932K stolen memory Sep 30 06:07:35 BrianLinux kernel: [ 12.187592] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xc0000000 Sep 30 06:07:35 BrianLinux kernel: [ 12.312161] acpi device:07: registered as cooling_device1 Sep 30 06:07:35 BrianLinux kernel: [ 12.312334] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:06/input/input6 Sep 30 06:07:35 BrianLinux kernel: [ 12.312388] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) Sep 30 06:07:35 BrianLinux kernel: [ 12.797442] [drm] Initialized drm 1.1.0 20060810 Sep 30 06:07:35 BrianLinux kernel: [ 13.574398] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 Sep 30 06:07:35 BrianLinux kernel: [ 13.574406] i915 0000:00:02.0: setting latency timer to 64 Sep 30 06:07:35 BrianLinux kernel: [ 14.102611] [drm] TV-14: set mode NTSC 480i 0 Sep 30 06:07:35 BrianLinux kernel: [ 14.135072] ip_tables: (C) 2000-2006 Netfilter Core Team Sep 30 06:07:35 BrianLinux kernel: [ 14.259387] [drm] fb0: inteldrmfb frame buffer device Sep 30 06:07:35 BrianLinux kernel: [ 14.259400] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0 Sep 30 06:07:35 BrianLinux kernel: [ 14.345009] [drm] LVDS-8: set mode 1280x800 17 Sep 30 06:07:35 BrianLinux kernel: [ 14.518152] Console: switching to colour frame buffer device 160x50 Sep 30 06:07:35 BrianLinux kernel: [ 14.718074] Synaptics Touchpad, model: 1, fw: 6.2, id: 0x1a0b1, caps: 0xa04713/0x200000 Sep 30 06:07:35 BrianLinux kernel: [ 14.786060] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input7 Sep 30 06:07:36 BrianLinux kernel: [ 15.819796] alloc irq_desc for 22 on node -1 Sep 30 06:07:36 BrianLinux kernel: [ 15.819801] alloc kstat_irqs on node -1 Sep 30 06:07:36 BrianLinux kernel: [ 15.819810] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 Sep 30 06:07:36 BrianLinux kernel: [ 15.819859] HDA Intel 0000:00:1b.0: setting latency timer to 64 Sep 30 06:07:36 BrianLinux kernel: [ 17.122257] Adding 1558296k swap on /dev/sda4. Priority:-1 extents:1 across:1558296k Sep 30 06:07:36 BrianLinux kernel: [ 17.245984] EXT4-fs (sda1): internal journal on sda1:8 Sep 30 06:07:36 BrianLinux kernel: [ 18.236802] type=1505 audit(1254308856.466:9): operation="profile_replace" pid=703 name=/usr/sbin/tcpdump Sep 30 06:07:36 BrianLinux kernel: [ 18.239183] type=1505 audit(1254308856.466:10): operation="profile_replace" pid=704 name=/sbin/dhclient3 Sep 30 06:07:36 BrianLinux kernel: [ 18.239977] type=1505 audit(1254308856.466:11): operation="profile_replace" pid=704 name=/usr/lib/NetworkManager/nm-dhcp-client.action Sep 30 06:07:36 BrianLinux kernel: [ 18.240602] type=1505 audit(1254308856.470:12): operation="profile_replace" pid=704 name=/usr/lib/connman/scripts/dhclient-script Sep 30 06:07:36 BrianLinux kernel: [ 18.242627] type=1505 audit(1254308856.470:13): operation="profile_replace" pid=705 name=/usr/sbin/mysqld-akonadi Sep 30 06:07:37 BrianLinux NetworkManager: starting... Sep 30 06:07:37 BrianLinux NetworkManager: Trying to start the modem-manager... Sep 30 06:07:37 BrianLinux NetworkManager: SCPlugin-Ifupdown: init! Sep 30 06:07:37 BrianLinux NetworkManager: SCPlugin-Ifupdown: update_system_hostname Sep 30 06:07:37 BrianLinux NetworkManager: SCPluginIfupdown: management mode: unmanaged Sep 30 06:07:37 BrianLinux NetworkManager: SCPlugin-Ifupdown: devices added (path: /sys/devices/pci0000:00/0000:00:1c.2/0000:06:00.0/net/eth1, iface: eth1) Sep 30 06:07:37 BrianLinux NetworkManager: SCPlugin-Ifupdown: device added (path: /sys/devices/pci0000:00/0000:00:1c.2/0000:06:00.0/net/eth1, iface: eth1): no exported connection Sep 30 06:07:37 BrianLinux NetworkManager: SCPlugin-Ifupdown: devices added (path: /sys/devices/pci0000:00/0000:00:1e.0/0000:08:08.0/net/eth0, iface: eth0) Sep 30 06:07:37 BrianLinux NetworkManager: SCPlugin-Ifupdown: device added (path: /sys/devices/pci0000:00/0000:00:1e.0/0000:08:08.0/net/eth0, iface: eth0): no exported connection Sep 30 06:07:37 BrianLinux NetworkManager: SCPlugin-Ifupdown: devices added (path: /sys/devices/virtual/net/lo, iface: lo) Sep 30 06:07:37 BrianLinux NetworkManager: SCPlugin-Ifupdown: device added (path: /sys/devices/virtual/net/lo, iface: lo): no exported connection Sep 30 06:07:37 BrianLinux NetworkManager: SCPlugin-Ifupdown: end _init. Sep 30 06:07:37 BrianLinux NetworkManager: Loaded plugin ifupdown: (C) 2008 Canonical Ltd. To report bugs please use the NetworkManager mailing list. Sep 30 06:07:37 BrianLinux NetworkManager: Loaded plugin keyfile: (c) 2007 - 2008 Red Hat, Inc. To report bugs please use the NetworkManager mailing list. Sep 30 06:07:37 BrianLinux NetworkManager: Wireless now enabled by radio killswitch Sep 30 06:07:37 BrianLinux NetworkManager: SCPlugin-Ifupdown: (141712112) ... get_connections. Sep 30 06:07:37 BrianLinux NetworkManager: SCPlugin-Ifupdown: (141712112) ... get_connections (managed=false): return empty list. Sep 30 06:07:37 BrianLinux modem-manager: Loaded plugin Nokia Sep 30 06:07:37 BrianLinux modem-manager: Loaded plugin Sierra Sep 30 06:07:37 BrianLinux modem-manager: Loaded plugin ZTE Sep 30 06:07:37 BrianLinux modem-manager: Loaded plugin Novatel Sep 30 06:07:37 BrianLinux modem-manager: Loaded plugin Huawei Sep 30 06:07:37 BrianLinux modem-manager: Loaded plugin Option High-Speed Sep 30 06:07:37 BrianLinux modem-manager: Loaded plugin Ericsson MBM Sep 30 06:07:37 BrianLinux modem-manager: Loaded plugin Gobi Sep 30 06:07:37 BrianLinux modem-manager: Loaded plugin MotoC Sep 30 06:07:37 BrianLinux modem-manager: Loaded plugin Generic Sep 30 06:07:37 BrianLinux modem-manager: Loaded plugin Option Sep 30 06:07:37 BrianLinux NetworkManager: Ifupdown: get unmanaged devices count: 0 Sep 30 06:07:37 BrianLinux NetworkManager: (eth1): driver supports SSID scans (scan_capa 0x01). Sep 30 06:07:37 BrianLinux NetworkManager: (eth1): new 802.11 WiFi device (driver: 'wl') Sep 30 06:07:37 BrianLinux NetworkManager: (eth1): exported as /org/freedesktop/NetworkManager/Devices/0 Sep 30 06:07:37 BrianLinux NetworkManager: (eth1): now managed Sep 30 06:07:37 BrianLinux NetworkManager: (eth1): device state change: 1 -> 2 (reason 2) Sep 30 06:07:37 BrianLinux NetworkManager: (eth1): preparing device. Sep 30 06:07:37 BrianLinux NetworkManager: (eth1): deactivating device (reason: 2). Sep 30 06:07:37 BrianLinux NetworkManager: supplicant_interface_acquire: assertion `mgr_state == NM_SUPPLICANT_MANAGER_STATE_IDLE' failed Sep 30 06:07:37 BrianLinux NetworkManager: (eth0): new Ethernet device (driver: '8139too') Sep 30 06:07:37 BrianLinux NetworkManager: (eth0): exported as /org/freedesktop/NetworkManager/Devices/1 Sep 30 06:07:37 BrianLinux NetworkManager: (eth0): now managed Sep 30 06:07:37 BrianLinux NetworkManager: (eth0): device state change: 1 -> 2 (reason 2) Sep 30 06:07:37 BrianLinux NetworkManager: (eth0): bringing up device. Sep 30 06:07:37 BrianLinux NetworkManager: (eth0): preparing device. Sep 30 06:07:37 BrianLinux NetworkManager: (eth0): deactivating device (reason: 2). Sep 30 06:07:37 BrianLinux NetworkManager: Added default wired connection 'Auto eth0' for /sys/devices/pci0000:00/0000:00:1e.0/0000:08:08.0/net/eth0 Sep 30 06:07:37 BrianLinux NetworkManager: default_adapter_cb(): bluez error getting default adapter: The name org.bluez was not provided by any .service files Sep 30 06:07:37 BrianLinux NetworkManager: modem-manager is now available Sep 30 06:07:37 BrianLinux NetworkManager: Trying to start the supplicant... Sep 30 06:07:37 BrianLinux NetworkManager: (eth1): supplicant manager state: down -> idle Sep 30 06:07:37 BrianLinux NetworkManager: (eth1): device state change: 2 -> 3 (reason 0) Sep 30 06:07:37 BrianLinux NetworkManager: (eth1): supplicant interface state: starting -> ready Sep 30 06:07:39 BrianLinux kernel: [ 18.246516] type=1505 audit(1254308856.474:14): operation="profile_replace" pid=707 name=/usr/lib/cups/backend/cups-pdf Sep 30 06:07:39 BrianLinux kernel: [ 18.247725] type=1505 audit(1254308856.474:15): operation="profile_replace" pid=707 name=/usr/sbin/cupsd Sep 30 06:07:39 BrianLinux kernel: [ 19.592582] eth0: link down Sep 30 06:07:39 BrianLinux kernel: [ 19.592924] ADDRCONF(NETDEV_UP): eth0: link is not ready Sep 30 06:07:39 BrianLinux kernel: [ 19.834446] [drm] TV-14: set mode NTSC 480i 0 Sep 30 06:07:39 BrianLinux kernel: [ 20.147650] [drm] TV-14: set mode NTSC 480i 0 Sep 30 06:07:39 BrianLinux kernel: [ 20.475947] [drm] TV-14: set mode NTSC 480i 0 Sep 30 06:07:39 BrianLinux kernel: [ 20.699212] [drm] TV-14: set mode NTSC 480i 0 Sep 30 06:08:21 BrianLinux NetworkManager: Activation (eth1) starting connection 'ELCNet' Sep 30 06:08:21 BrianLinux NetworkManager: (eth1): device state change: 3 -> 4 (reason 0) Sep 30 06:08:21 BrianLinux NetworkManager: Activation (eth1) Stage 1 of 5 (Device Prepare) scheduled... Sep 30 06:08:21 BrianLinux NetworkManager: Activation (eth1) Stage 1 of 5 (Device Prepare) started... Sep 30 06:08:21 BrianLinux NetworkManager: Activation (eth1) Stage 2 of 5 (Device Configure) scheduled... Sep 30 06:08:21 BrianLinux NetworkManager: Activation (eth1) Stage 1 of 5 (Device Prepare) complete. Sep 30 06:08:21 BrianLinux NetworkManager: Activation (eth1) Stage 2 of 5 (Device Configure) starting... Sep 30 06:08:21 BrianLinux NetworkManager: (eth1): device state change: 4 -> 5 (reason 0) Sep 30 06:08:21 BrianLinux NetworkManager: Activation (eth1/wireless): access point 'ELCNet' has security, but secrets are required. Sep 30 06:08:21 BrianLinux NetworkManager: (eth1): device state change: 5 -> 6 (reason 0) Sep 30 06:08:21 BrianLinux NetworkManager: Activation (eth1) Stage 2 of 5 (Device Configure) complete. Sep 30 06:08:28 BrianLinux NetworkManager: (eth1): supplicant connection state: inactive -> scanning Sep 30 06:08:30 BrianLinux NetworkManager: secrets_update_setting(): Failed to update connection secrets: 1 ipv4 Sep 30 06:08:30 BrianLinux NetworkManager: secrets_update_setting(): Failed to update connection secrets: 1 802-1x Sep 30 06:08:30 BrianLinux NetworkManager: Activation (eth1) Stage 1 of 5 (Device Prepare) scheduled... Sep 30 06:08:30 BrianLinux NetworkManager: Activation (eth1) Stage 1 of 5 (Device Prepare) started... Sep 30 06:08:30 BrianLinux NetworkManager: (eth1): device state change: 6 -> 4 (reason 0) Sep 30 06:08:30 BrianLinux NetworkManager: Activation (eth1) Stage 2 of 5 (Device Configure) scheduled... Sep 30 06:08:30 BrianLinux NetworkManager: Activation (eth1) Stage 1 of 5 (Device Prepare) complete. Sep 30 06:08:30 BrianLinux NetworkManager: Activation (eth1) Stage 2 of 5 (Device Configure) starting... Sep 30 06:08:30 BrianLinux NetworkManager: (eth1): device state change: 4 -> 5 (reason 0) Sep 30 06:08:30 BrianLinux NetworkManager: Activation (eth1/wireless): connection 'ELCNet' has security, and secrets exist. No new secrets needed. Sep 30 06:08:30 BrianLinux NetworkManager: Config: added 'ssid' value 'ELCNet' Sep 30 06:08:30 BrianLinux NetworkManager: Config: added 'scan_ssid' value '1' Sep 30 06:08:30 BrianLinux NetworkManager: Config: added 'key_mgmt' value 'NONE' Sep 30 06:08:30 BrianLinux NetworkManager: Config: added 'wep_key0' value '' Sep 30 06:08:30 BrianLinux NetworkManager: Config: added 'wep_tx_keyidx' value '0' Sep 30 06:08:30 BrianLinux NetworkManager: nm_setting_802_1x_get_pkcs11_engine_path: assertion `NM_IS_SETTING_802_1X (setting)' failed Sep 30 06:08:30 BrianLinux NetworkManager: nm_setting_802_1x_get_pkcs11_module_path: assertion `NM_IS_SETTING_802_1X (setting)' failed Sep 30 06:08:30 BrianLinux NetworkManager: Activation (eth1) Stage 2 of 5 (Device Configure) complete. Sep 30 06:08:30 BrianLinux NetworkManager: Config: set interface ap_scan to 1 Sep 30 06:08:30 BrianLinux NetworkManager: (eth1): supplicant connection state: scanning -> disconnected Sep 30 06:08:30 BrianLinux NetworkManager: (eth1): supplicant connection state: disconnected -> scanning Sep 30 06:08:35 BrianLinux NetworkManager: (eth1): supplicant connection state: scanning -> associating Sep 30 06:08:36 BrianLinux NetworkManager: (eth1): supplicant connection state: associating -> associated Sep 30 06:08:36 BrianLinux NetworkManager: (eth1): supplicant connection state: associated -> completed Sep 30 06:08:36 BrianLinux NetworkManager: Activation (eth1/wireless) Stage 2 of 5 (Device Configure) successful. Connected to wireless network 'ELCNet'. Sep 30 06:08:36 BrianLinux NetworkManager: Activation (eth1) Stage 3 of 5 (IP Configure Start) scheduled. Sep 30 06:08:36 BrianLinux NetworkManager: Activation (eth1) Stage 3 of 5 (IP Configure Start) started... Sep 30 06:08:36 BrianLinux NetworkManager: (eth1): device state change: 5 -> 7 (reason 0) Sep 30 06:08:36 BrianLinux NetworkManager: Activation (eth1) Beginning DHCP transaction (timeout in 45 seconds) Sep 30 06:08:36 BrianLinux NetworkManager: dhclient started with pid 1467 Sep 30 06:08:36 BrianLinux NetworkManager: Activation (eth1) Stage 4 of 5 (IP6 Configure Get) scheduled... Sep 30 06:08:36 BrianLinux NetworkManager: Activation (eth1) Stage 3 of 5 (IP Configure Start) complete. Sep 30 06:08:36 BrianLinux NetworkManager: Activation (eth1) Stage 4 of 5 (IP6 Configure Get) started... Sep 30 06:08:36 BrianLinux NetworkManager: Activation (eth1) Stage 4 of 5 (IP6 Configure Get) complete. Sep 30 06:08:36 BrianLinux dhclient: Internet Systems Consortium DHCP Client V3.1.2 Sep 30 06:08:36 BrianLinux dhclient: Copyright 2004-2008 Internet Systems Consortium. Sep 30 06:08:36 BrianLinux dhclient: All rights reserved. Sep 30 06:08:36 BrianLinux dhclient: For info, please visit http://www.isc.org/sw/dhcp/ Sep 30 06:08:36 BrianLinux dhclient: Sep 30 06:08:36 BrianLinux NetworkManager: DHCP: device eth1 state changed (null) -> preinit Sep 30 06:08:36 BrianLinux dhclient: Listening on LPF/eth1/00:14:a5:f0:81:57 Sep 30 06:08:36 BrianLinux dhclient: Sending on LPF/eth1/00:14:a5:f0:81:57 Sep 30 06:08:36 BrianLinux dhclient: Sending on Socket/fallback Sep 30 06:08:40 BrianLinux dhclient: DHCPREQUEST of 192.168.2.193 on eth1 to 255.255.255.255 port 67 Sep 30 06:08:40 BrianLinux dhclient: DHCPACK of 192.168.2.193 from 192.168.2.1 Sep 30 06:08:40 BrianLinux NetworkManager: DHCP: device eth1 state changed preinit -> reboot Sep 30 06:08:40 BrianLinux NetworkManager: Activation (eth1) Stage 4 of 5 (IP4 Configure Get) scheduled... Sep 30 06:08:40 BrianLinux NetworkManager: Activation (eth1) Stage 4 of 5 (IP4 Configure Get) started... Sep 30 06:08:40 BrianLinux NetworkManager: address 192.168.2.193 Sep 30 06:08:40 BrianLinux NetworkManager: prefix 24 (255.255.255.0) Sep 30 06:08:40 BrianLinux NetworkManager: gateway 192.168.2.1 Sep 30 06:08:40 BrianLinux NetworkManager: nameserver '192.168.2.1' Sep 30 06:08:40 BrianLinux NetworkManager: Activation (eth1) Stage 5 of 5 (IP Configure Commit) scheduled... Sep 30 06:08:40 BrianLinux NetworkManager: Activation (eth1) Stage 4 of 5 (IP4 Configure Get) complete. Sep 30 06:08:40 BrianLinux NetworkManager: Activation (eth1) Stage 5 of 5 (IP Configure Commit) started... Sep 30 06:08:40 BrianLinux dhclient: bound to 192.168.2.193 -- renewal in 39693 seconds. Sep 30 06:08:41 BrianLinux NetworkManager: (eth1): device state change: 7 -> 8 (reason 0) Sep 30 06:08:41 BrianLinux NetworkManager: [1254308921.025993] periodic_update(): Roamed from BSSID 00:1B:11:EF:F7:26 (ELCNet) to (none) ((none)) Sep 30 06:08:41 BrianLinux NetworkManager: Policy set 'ELCNet' (eth1) as default for routing and DNS. Sep 30 06:08:41 BrianLinux NetworkManager: Activation (eth1) successful, device activated. Sep 30 06:08:41 BrianLinux NetworkManager: Activation (eth1) Stage 5 of 5 (IP Configure Commit) complete. Sep 30 06:10:21 BrianLinux kernel: [ 21.062504] ppdev: user-space parallel port driver Sep 30 06:10:21 BrianLinux kernel: [ 30.240046] eth1: no IPv6 routers present Sep 30 06:10:21 BrianLinux kernel: [ 37.503217] [drm] TV-14: set mode NTSC 480i 0 Sep 30 06:10:21 BrianLinux kernel: [ 37.646252] [drm] TV-14: set mode NTSC 480i 0 Sep 30 06:10:21 BrianLinux kernel: [ 38.015424] [drm] TV-14: set mode NTSC 480i 0 Sep 30 06:10:21 BrianLinux kernel: [ 38.158639] [drm] TV-14: set mode NTSC 480i 0 Sep 30 06:10:21 BrianLinux kernel: [ 182.896084] usb 1-1: new high speed USB device using ehci_hcd and address 2 Sep 30 06:10:21 BrianLinux kernel: [ 183.030364] usb 1-1: configuration #1 chosen from 1 choice Sep 30 06:10:21 BrianLinux kernel: [ 183.495149] Initializing USB Mass Storage driver... Sep 30 06:10:26 BrianLinux kernel: [ 183.495277] scsi6 : SCSI emulation for USB Mass Storage devices Sep 30 06:10:26 BrianLinux kernel: [ 183.495477] usbcore: registered new interface driver usb-storage Sep 30 06:10:26 BrianLinux kernel: [ 183.495481] USB Mass Storage support registered. Sep 30 06:10:26 BrianLinux kernel: [ 183.546839] usb-storage: device found at 2 Sep 30 06:10:26 BrianLinux kernel: [ 183.546844] usb-storage: waiting for device to settle before scanning Sep 30 06:10:26 BrianLinux kernel: [ 188.544183] usb-storage: device scan complete Sep 30 06:10:26 BrianLinux kernel: [ 188.545043] scsi 6:0:0:0: Direct-Access USB 2.0 USB Flash Drive 0.00 PQ: 0 ANSI: 2 Sep 30 06:10:27 BrianLinux kernel: [ 188.548777] sd 6:0:0:0: Attached scsi generic sg2 type 0 Sep 30 06:10:27 BrianLinux kernel: [ 188.589473] sd 6:0:0:0: [sdb] 15794176 512-byte logical blocks: (8.08 GB/7.53 GiB) Sep 30 06:10:27 BrianLinux kernel: [ 188.590362] sd 6:0:0:0: [sdb] Write Protect is off Sep 30 06:10:27 BrianLinux kernel: [ 188.590368] sd 6:0:0:0: [sdb] Mode Sense: 00 00 00 00 Sep 30 06:10:27 BrianLinux kernel: [ 188.590372] sd 6:0:0:0: [sdb] Assuming drive cache: write through Sep 30 06:10:27 BrianLinux kernel: [ 188.593953] sd 6:0:0:0: [sdb] Assuming drive cache: write through Sep 30 06:10:27 BrianLinux kernel: [ 188.593963] sdb: sdb1 Sep 30 06:10:27 BrianLinux kernel: [ 188.808533] sd 6:0:0:0: [sdb] Assuming drive cache: write through Sep 30 06:40:01 BrianLinux NetworkManager: (eth1): device state change: 8 -> 3 (reason 38) Sep 30 06:40:01 BrianLinux NetworkManager: (eth1): deactivating device (reason: 38). Sep 30 06:40:02 BrianLinux NetworkManager: nm_signal_handler(): Caught signal 15, shutting down normally. Sep 30 06:40:02 BrianLinux kernel: Kernel logging (proc) stopped. Sep 30 14:45:48 BrianLinux kernel: imklog 4.2.0, log source = /var/run/rsyslog/kmsg started. Sep 30 14:45:48 BrianLinux kernel: [ 0.000000] Initializing cgroup subsys cpuset Sep 30 14:45:48 BrianLinux kernel: [ 0.000000] Initializing cgroup subsys cpu Sep 30 14:45:48 BrianLinux kernel: [ 0.000000] Linux version 2.6.31-10-generic (buildd@rothera) (gcc version 4.4.1 (Ubuntu 4.4.1-4ubuntu1) ) #35-Ubuntu SMP Tue Sep 22 17:33:42 UTC 2009 (Ubuntu 2.6.31-10.35-generic) Sep 30 14:45:48 BrianLinux kernel: [ 0.000000] KERNEL supported cpus: Sep 30 14:45:48 BrianLinux kernel: [ 0.000000] Intel GenuineIntel Sep 30 14:45:48 BrianLinux kernel: [ 0.000000] AMD AuthenticAMD Sep 30 14:45:48 BrianLinux kernel: [ 0.000000] NSC Geode by NSC Sep 30 14:45:48 BrianLinux kernel: [ 0.000000] Cyrix CyrixInstead Sep 30 14:45:48 BrianLinux kernel: [ 0.000000] Centaur CentaurHauls Sep 30 14:45:48 BrianLinux kernel: [ 0.000000] Transmeta GenuineTMx86 Sep 30 14:45:48 BrianLinux kernel: [ 0.000000] Transmeta TransmetaCPU Sep 30 14:45:48 BrianLinux kernel: [ 0.000000] UMC UMC UMC UMC Sep 30 14:45:48 BrianLinux kernel: [ 0.000000] BIOS-provided physical RAM map: Sep 30 14:45:48 BrianLinux kernel: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable) Sep 30 14:45:48 BrianLinux kernel: [ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) Sep 30 14:45:48 BrianLinux kernel: [ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) Sep 30 14:45:48 BrianLinux kernel: [ 0.000000] BIOS-e820: 0000000000100000 - 000000007f680000 (usable) Sep 30 14:45:48 BrianLinux kernel: [ 0.000000] BIOS-e820: 000000007f680000 - 000000007f700000 (ACPI NVS) Sep 30 14:45:48 BrianLinux kernel: [ 0.000000] BIOS-e820: 000000007f700000 - 0000000080000000 (reserved) Sep 30 14:45:48 BrianLinux kernel: [ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) Sep 30 14:45:48 BrianLinux kernel: [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) Sep 30 14:45:48 BrianLinux kernel: [ 0.000000] BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved) Sep 30 14:45:48 BrianLinux kernel: [ 0.000000] BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved) Sep 30 14:45:48 BrianLinux kernel: [ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved) Sep 30 14:45:48 BrianLinux kernel: [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) Sep 30 14:45:48 BrianLinux kernel: [ 0.000000] BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved) Sep 30 14:45:48 BrianLinux kernel: [ 0.000000] DMI present. Sep 30 14:45:48 BrianLinux kernel: [ 0.000000] last_pfn = 0x7f680 max_arch_pfn = 0x100000 Sep 30 14:45:48 BrianLinux kernel: [ 0.000000] MTRR default type: uncachable Sep 30 14:45:48 BrianLinux kernel: [ 0.000000] MTRR fixed ranges enabled: Sep 30 14:45:48 BrianLinux kernel: [ 0.000000] 00000-9FFFF write-back Sep 30 14:45:48 BrianLinux kernel: [ 0.000000] A0000-BFFFF uncachable Sep 30 14:45:48 BrianLinux kernel: [ 0.000000] C0000-CFFFF write-protect Sep 30 14:45:48 BrianLinux kernel: [ 0.000000] D0000-DFFFF uncachable Sep 30 14:45:48 BrianLinux kernel: [ 0.000000] E0000-FFFFF write-protect Sep 30 14:45:48 BrianLinux kernel: [ 0.000000] MTRR variable ranges enabled: Sep 30 14:45:48 BrianLinux kernel: [ 0.000000] 0 base 000000000 mask F80000000 write-back Sep 30 14:45:48 BrianLinux kernel: [ 0.000000] 1 base 07F700000 mask FFFF00000 uncachable Sep 30 14:45:48 BrianLinux kernel: [ 0.000000] 2 base 07F800000 mask FFF800000 uncachable Sep 30 14:45:48 BrianLinux kernel: [ 0.000000] 3 disabled Sep 30 14:45:48 BrianLinux kernel: [ 0.000000] 4 disabled Sep 30 14:45:48 BrianLinux kernel: [ 0.000000] 5 disabled Sep 30 14:45:48 BrianLinux kernel: [ 0.000000] 6 disabled Sep 30 14:45:48 BrianLinux kernel: [ 0.000000] 7 disabled Sep 30 14:45:48 BrianLinux kernel: [ 0.000000] e820 update range: 0000000000002000 - 0000000000006000 (usable) ==> (reserved) Sep 30 14:45:48 BrianLinux kernel: [ 0.000000] Scanning 1 areas for low memory corruption Sep 30 14:45:48 BrianLinux kernel: [ 0.000000] modified physical RAM map: Sep 30 14:45:48 BrianLinux kernel: [ 0.000000] modified: 0000000000000000 - 0000000000002000 (usable) Sep 30 14:45:48 BrianLinux kernel: [ 0.000000] modified: 0000000000002000 - 0000000000006000 (reserved) Sep 30 14:45:48 BrianLinux kernel: [ 0.000000] modified: 0000000000006000 - 000000000009f800 (usable) Sep 30 14:45:48 BrianLinux kernel: [ 0.000000] modified: 000000000009f800 - 00000000000a0000 (reserved) Sep 30 14:45:48 BrianLinux kernel: [ 0.000000] modified: 00000000000e0000 - 0000000000100000 (reserved) Sep 30 14:45:48 BrianLinux kernel: [ 0.000000] modified: 0000000000100000 - 000000007f680000 (usable) Sep 30 14:45:48 BrianLinux kernel: [ 0.000000] modified: 000000007f680000 - 000000007f700000 (ACPI NVS) Sep 30 14:45:48 BrianLinux kernel: [ 0.000000] modified: 000000007f700000 - 0000000080000000 (reserved) Sep 30 14:45:48 BrianLinux kernel: [ 0.000000] modified: 00000000e0000000 - 00000000f0000000 (reserved) Sep 30 14:45:48 BrianLinux kernel: [ 0.000000] modified: 00000000fec00000 - 00000000fec10000 (reserved) Sep 30 14:45:48 BrianLinux kernel: [ 0.000000] modified: 00000000fed00000 - 00000000fed00400 (reserved) Sep 30 14:45:48 BrianLinux kernel: [ 0.000000] modified: 00000000fed14000 - 00000000fed1a000 (reserved) Sep 30 14:45:48 BrianLinux kernel: [ 0.000000] modified: 00000000fed1c000 - 00000000fed90000 (reserved) Sep 30 14:45:48 BrianLinux kernel: [ 0.000000] modified: 00000000fee00000 - 00000000fee01000 (reserved) Sep 30 14:45:48 BrianLinux kernel: [ 0.000000] modified: 00000000ff000000 - 0000000100000000 (reserved) Sep 30 14:45:48 BrianLinux kernel: [ 0.000000] initial memory mapped : 0 - 00c00000 Sep 30 14:45:48 BrianLinux kernel: [ 0.000000] init_memory_mapping: 0000000000000000-00000000377fe000 Sep 30 14:45:48 BrianLinux kernel: [ 0.000000] Using x86 segment limits to approximate NX protection Sep 30 14:45:48 BrianLinux kernel: [ 0.000000] 0000000000 - 0000400000 page 4k Sep 30 14:45:48 BrianLinux kernel: [ 0.000000] 0000400000 - 0037400000 page 2M Sep 30 14:45:48 BrianLinux kernel: [ 0.000000] 0037400000 - 00377fe000 page 4k Sep 30 14:45:48 BrianLinux kernel: [ 0.000000] kernel direct mapping tables up to 377fe000 @ 7000-c000 Sep 30 14:45:48 BrianLinux kernel: [ 0.000000] RAMDISK: 37975000 - 37fef9e8 Sep 30 14:45:48 BrianLinux kernel: [ 0.000000] Allocated new RAMDISK: 008a4000 - 00f1e9e8 Sep 30 14:45:48 BrianLinux kernel: [ 0.000000] Move RAMDISK from 0000000037975000 - 0000000037fef9e7 to 008a4000 - 00f1e9e7 Sep 30 14:45:48 BrianLinux kernel: [ 0.000000] ACPI: RSDP 000f6510 00014 (v00 PTLTD ) Sep 30 14:45:48 BrianLinux kernel: [ 0.000000] ACPI: RSDT 7f68cee1 0004C (v01 HPQOEM SLIC-MPC 06040000 LTP 00000000) Sep 30 14:45:48 BrianLinux kernel: [ 0.000000] ACPI: FACP 7f693c86 00074 (v01 HP NISSAN 06040000 LOHR 0000005A) Sep 30 14:45:48 BrianLinux kernel: [ 0.000000] ACPI: DSDT 7f68d80d 06479 (v01 HP NISSAN 06040000 INTL 20060608) Sep 30 14:45:48 BrianLinux kernel: [ 0.000000] ACPI: FACS 7f694fc0 00040 Sep 30 14:45:48 BrianLinux kernel: [ 0.000000] ACPI: APIC 7f693cfa 00068 (v01 HP NISSAN 06040000 LOHR 0000005A) Sep 30 14:45:48 BrianLinux kernel: [ 0.000000] ACPI: HPET 7f693d62 00038 (v01 HP NISSAN 06040000 LOHR 0000005A) Sep 30 14:45:48 BrianLinux kernel: [ 0.000000] ACPI: MCFG 7f693d9a 0003C (v01 HP NISSAN 06040000 LOHR 0000005A) Sep 30 14:45:48 BrianLinux kernel: [ 0.000000] ACPI: BOOT 7f693fd8 00028 (v01 PTLTD $SBFTBL$ 06040000 LTP 00000001) Sep 30 14:45:48 BrianLinux kernel: [ 0.000000] ACPI: SLIC 7f693e08 00176 (v01 HPQOEM SLIC-MPC 06040000 LOHR 00000000) Sep 30 14:45:48 BrianLinux kernel: [ 0.000000] ACPI: APIC 7f693f7e 0005A (v01 PTLTD APIC 06040000 LTP 00000000) Sep 30 14:45:48 BrianLinux kernel: [ 0.000000] ACPI: SSDT 7f68d5ff 0020A (v01 SataRe SataAhci 00001000 INTL 20060217) Sep 30 14:45:48 BrianLinux kernel: [ 0.000000] ACPI: SSDT 7f68d423 001DC (v01 PmRef Cpu0Cst 00003001 INTL 20060217) Sep 30 14:45:48 BrianLinux kernel: [ 0.000000] ACPI: SSDT 7f68cf2d 004F6 (v01 PmRef CpuPm 00003000 INTL 20060217) Sep 30 14:45:48 BrianLinux kernel: [ 0.000000] ACPI: BIOS bug: multiple APIC/MADT found, using 0 Sep 30 14:45:48 BrianLinux kernel: [ 0.000000] ACPI: If "acpi_apic_instance=2" works better, notify linux-acpi@vger.kernel.org Sep 30 14:45:48 BrianLinux kernel: [ 0.000000] ACPI: Local APIC address 0xfee00000 Sep 30 14:45:48 BrianLinux kernel: [ 0.000000] 1150MB HIGHMEM available. Sep 30 14:45:48 BrianLinux kernel: [ 0.000000] 887MB LOWMEM available. Sep 30 14:45:48 BrianLinux kernel: [ 0.000000] mapped low ram: 0 - 377fe000 Sep 30 14:45:48 BrianLinux kernel: [ 0.000000] low ram: 0 - 377fe000 Sep 30 14:45:48 BrianLinux kernel: [ 0.000000] node 0 low ram: 00000000 - 377fe000 Sep 30 14:45:48 BrianLinux kernel: [ 0.000000] node 0 bootmap 00008000 - 0000ef00 Sep 30 14:45:48 BrianLinux kernel: [ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 00377fe000] Sep 30 14:45:48 BrianLinux kernel: [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] Sep 30 14:45:48 BrianLinux kernel: [ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000] Sep 30 14:45:48 BrianLinux kernel: [ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000] Sep 30 14:45:48 BrianLinux kernel: [ 0.000000] #3 [0000100000 - 000089f080] TEXT DATA BSS ==> [0000100000 - 000089f080] Sep 30 14:45:48 BrianLinux kernel: [ 0.000000] #4 [000009f800 - 0000100000] BIOS reserved ==> [000009f800 - 0000100000] Sep 30 14:45:48 BrianLinux kernel: [ 0.000000] #5 [00008a0000 - 00008a312c] BRK ==> [00008a0000 - 00008a312c] Sep 30 14:45:48 BrianLinux kernel: [ 0.000000] #6 [0000007000 - 0000008000] PGTABLE ==> [0000007000 - 0000008000] Sep 30 14:45:48 BrianLinux kernel: [ 0.000000] #7 [00008a4000 - 0000f1e9e8] NEW RAMDISK ==> [00008a4000 - 0000f1e9e8] Sep 30 14:45:48 BrianLinux kernel: [ 0.000000] #8 [0000008000 - 000000f000] BOOTMAP ==> [0000008000 - 000000f000] Sep 30 14:45:48 BrianLinux kernel: [ 0.000000] found SMP MP-table at [c00f65c0] f65c0 Sep 30 14:45:48 BrianLinux kernel: [ 0.000000] Zone PFN ranges: Sep 30 14:45:48 BrianLinux kernel: [ 0.000000] DMA 0x00000000 -> 0x00001000 Sep 30 14:45:48 BrianLinux kernel: [ 0.000000] Normal 0x00001000 -> 0x000377fe Sep 30 14:45:48 BrianLinux kernel: [ 0.000000] HighMem 0x000377fe -> 0x0007f680 Sep 30 14:45:48 BrianLinux kernel: [ 0.000000] Movable zone start PFN for each node Sep 30 14:45:48 BrianLinux kernel: [ 0.000000] early_node_map[3] active PFN ranges Sep 30 14:45:48 BrianLinux kernel: [ 0.000000] 0: 0x00000000 -> 0x00000002 Sep 30 14:45:48 BrianLinux kernel: [ 0.000000] 0: 0x00000006 -> 0x0000009f Sep 30 14:45:48 BrianLinux kernel: [ 0.000000] 0: 0x00000100 -> 0x0007f680 Sep 30 14:45:48 BrianLinux kernel: [ 0.000000] On node 0 totalpages: 521755 Sep 30 14:45:48 BrianLinux kernel: [ 0.000000] free_area_init_node: node 0, pgdat c077b840, node_mem_map c1000000 Sep 30 14:45:48 BrianLinux kernel: [ 0.000000] DMA zone: 32 pages used for memmap Sep 30 14:45:48 BrianLinux kernel: [ 0.000000] DMA zone: 0 pages reserved Sep 30 14:45:48 BrianLinux kernel: [ 0.000000] DMA zone: 3963 pages, LIFO batch:0 Sep 30 14:45:48 BrianLinux kernel: [ 0.000000] Normal zone: 1744 pages used for memmap Sep 30 14:45:48 BrianLinux kernel: [ 0.000000] Normal zone: 221486 pages, LIFO batch:31 Sep 30 14:45:48 BrianLinux kernel: [ 0.000000] HighMem zone: 2302 pages used for memmap Sep 30 14:45:48 BrianLinux kernel: [ 0.000000] HighMem zone: 292228 pages, LIFO batch:31 Sep 30 14:45:48 BrianLinux kernel: [ 0.000000] Using APIC driver default Sep 30 14:45:48 BrianLinux kernel: [ 0.000000] ACPI: PM-Timer IO Port: 0x1008 Sep 30 14:45:48 BrianLinux kernel: [ 0.000000] ACPI: Local APIC address 0xfee00000 Sep 30 14:45:48 BrianLinux kernel: [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) Sep 30 14:45:48 BrianLinux kernel: [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] disabled) Sep 30 14:45:48 BrianLinux kernel: [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) Sep 30 14:45:48 BrianLinux kernel: [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) Sep 30 14:45:48 BrianLinux kernel: [ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) Sep 30 14:45:48 BrianLinux kernel: [ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23 Sep 30 14:45:48 BrianLinux kernel: [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) Sep 30 14:45:48 BrianLinux kernel: [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) Sep 30 14:45:48 BrianLinux kernel: [ 0.000000] ACPI: IRQ0 used by override. Sep 30 14:45:48 BrianLinux kernel: [ 0.000000] ACPI: IRQ2 used by override. Sep 30 14:45:48 BrianLinux kernel: [ 0.000000] ACPI: IRQ9 used by override. Sep 30 14:45:48 BrianLinux kernel: [ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs Sep 30 14:45:48 BrianLinux kernel: [ 0.000000] Using ACPI (MADT) for SMP configuration information Sep 30 14:45:48 BrianLinux kernel: [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 Sep 30 14:45:48 BrianLinux kernel: [ 0.000000] SMP: Allowing 2 CPUs, 1 hotplug CPUs Sep 30 14:45:48 BrianLinux kernel: [ 0.000000] nr_irqs_gsi: 24 Sep 30 14:45:48 BrianLinux kernel: [ 0.000000] PM: Registered nosave memory: 0000000000002000 - 0000000000006000 Sep 30 14:45:48 BrianLinux kernel: [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 Sep 30 14:45:48 BrianLinux kernel: [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000 Sep 30 14:45:48 BrianLinux kernel: [ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000 Sep 30 14:45:48 BrianLinux kernel: [ 0.000000] Allocating PCI resources starting at 80000000 (gap: 80000000:60000000) Sep 30 14:45:48 BrianLinux kernel: [ 0.000000] NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1 Sep 30 14:45:48 BrianLinux kernel: [ 0.000000] PERCPU: Embedded 14 pages at c1ffa000, static data 35036 bytes Sep 30 14:45:48 BrianLinux kernel: [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 517677 Sep 30 14:45:48 BrianLinux kernel: [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.31-10-generic root=UUID=a1103df1-e387-4fe4-9131-bb6f1d3dd864 ro quiet splash Sep 30 14:45:48 BrianLinux kernel: [ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes) Sep 30 14:45:48 BrianLinux kernel: [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Sep 30 14:45:48 BrianLinux kernel: [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Sep 30 14:45:48 BrianLinux kernel: [ 0.000000] Enabling fast FPU save and restore... done. Sep 30 14:45:48 BrianLinux kernel: [ 0.000000] Enabling unmasked SIMD FPU exception support... done. Sep 30 14:45:48 BrianLinux kernel: [ 0.000000] Initializing CPU#0 Sep 30 14:45:48 BrianLinux kernel: [ 0.000000] allocated 10437120 bytes of page_cgroup Sep 30 14:45:48 BrianLinux kernel: [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups Sep 30 14:45:48 BrianLinux kernel: [ 0.000000] Initializing HighMem for node 0 (000377fe:0007f680) Sep 30 14:45:48 BrianLinux kernel: [ 0.000000] Memory: 2044144k/2087424k available (4543k kernel code, 41948k reserved, 2129k data, 540k init, 1178120k highmem) Sep 30 14:45:48 BrianLinux kernel: [ 0.000000] virtual kernel memory layout: Sep 30 14:45:48 BrianLinux kernel: [ 0.000000] fixmap : 0xfff1d000 - 0xfffff000 ( 904 kB) Sep 30 14:45:48 BrianLinux kernel: [ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB) Sep 30 14:45:48 BrianLinux kernel: [ 0.000000] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB) Sep 30 14:45:48 BrianLinux kernel: [ 0.000000] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB) Sep 30 14:45:48 BrianLinux kernel: [ 0.000000] .init : 0xc0785000 - 0xc080c000 ( 540 kB) Sep 30 14:45:48 BrianLinux kernel: [ 0.000000] .data : 0xc056fd84 - 0xc07841a8 (2129 kB) Sep 30 14:45:48 BrianLinux kernel: [ 0.000000] .text : 0xc0100000 - 0xc056fd84 (4543 kB) Sep 30 14:45:48 BrianLinux kernel: [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok. Sep 30 14:45:48 BrianLinux kernel: [ 0.000000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 Sep 30 14:45:48 BrianLinux kernel: [ 0.000000] NR_IRQS:2304 nr_irqs:424 Sep 30 14:45:48 BrianLinux kernel: [ 0.000000] Fast TSC calibration using PIT Sep 30 14:45:48 BrianLinux kernel: [ 0.000000] Detected 1596.122 MHz processor. Sep 30 14:45:48 BrianLinux kernel: [ 0.001855] Console: colour VGA+ 80x25 Sep 30 14:45:48 BrianLinux kernel: [ 0.001860] console [tty0] enabled Sep 30 14:45:48 BrianLinux kernel: [ 0.002070] hpet clockevent registered Sep 30 14:45:48 BrianLinux kernel: [ 0.002075] HPET: 3 timers in total, 0 timers will be used for per-cpu timer Sep 30 14:45:48 BrianLinux kernel: [ 0.002082] Calibrating delay loop (skipped), value calculated using timer frequency.. 3192.24 BogoMIPS (lpj=6384488) Sep 30 14:45:48 BrianLinux kernel: [ 0.002106] Security Framework initialized Sep 30 14:45:48 BrianLinux kernel: [ 0.002135] AppArmor: AppArmor initialized Sep 30 14:45:48 BrianLinux kernel: [ 0.002145] Mount-cache hash table entries: 512 Sep 30 14:45:48 BrianLinux kernel: [ 0.002313] Initializing cgroup subsys ns Sep 30 14:45:48 BrianLinux kernel: [ 0.002319] Initializing cgroup subsys cpuacct Sep 30 14:45:48 BrianLinux kernel: [ 0.002325] Initializing cgroup subsys memory Sep 30 14:45:48 BrianLinux kernel: [ 0.002334] Initializing cgroup subsys freezer Sep 30 14:45:48 BrianLinux kernel: [ 0.002337] Initializing cgroup subsys net_cls Sep 30 14:45:48 BrianLinux kernel: [ 0.002355] CPU: L1 I cache: 32K, L1 D cache: 32K Sep 30 14:45:48 BrianLinux kernel: [ 0.002358] CPU: L2 cache: 1024K Sep 30 14:45:48 BrianLinux kernel: [ 0.002365] using mwait in idle threads. Sep 30 14:45:48 BrianLinux kernel: [ 0.002373] Performance Counters: no PMU driver, software counters only. Sep 30 14:45:48 BrianLinux kernel: [ 0.002381] Checking 'hlt' instruction... OK. Sep 30 14:45:48 BrianLinux kernel: [ 0.017034] SMP alternatives: switching to UP code Sep 30 14:45:48 BrianLinux kernel: [ 0.024008] ACPI: Core revision 20090521 Sep 30 14:45:48 BrianLinux kernel: [ 0.040464] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 Sep 30 14:45:48 BrianLinux kernel: [ 0.082549] CPU0: Intel(R) Celeron(R) M CPU 420 @ 1.60GHz stepping 08 Sep 30 14:45:48 BrianLinux kernel: [ 0.084001] Brought up 1 CPUs Sep 30 14:45:48 BrianLinux kernel: [ 0.084001] Total of 1 processors activated (3192.24 BogoMIPS). Sep 30 14:45:48 BrianLinux kernel: [ 0.084001] CPU0 attaching NULL sched-domain. Sep 30 14:45:48 BrianLinux kernel: [ 0.084001] Booting paravirtualized kernel on bare hardware Sep 30 14:45:48 BrianLinux kernel: [ 0.084001] regulator: core version 0.5 Sep 30 14:45:48 BrianLinux kernel: [ 0.084001] Time: 14:45:29 Date: 09/30/09 Sep 30 14:45:48 BrianLinux kernel: [ 0.084001] NET: Registered protocol family 16 Sep 30 14:45:48 BrianLinux kernel: [ 0.084001] EISA bus registered Sep 30 14:45:48 BrianLinux kernel: [ 0.084001] ACPI: bus type pci registered Sep 30 14:45:48 BrianLinux kernel: [ 0.084001] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255 Sep 30 14:45:48 BrianLinux kernel: [ 0.084001] PCI: MCFG area at e0000000 reserved in E820 Sep 30 14:45:48 BrianLinux kernel: [ 0.084001] PCI: Using MMCONFIG for extended config space Sep 30 14:45:48 BrianLinux kernel: [ 0.084001] PCI: Using configuration type 1 for base access Sep 30 14:45:48 BrianLinux kernel: [ 0.084001] bio: create slab at 0 Sep 30 14:45:48 BrianLinux kernel: [ 0.084001] ACPI: EC: Look up EC in DSDT Sep 30 14:45:48 BrianLinux kernel: [ 0.086123] ACPI: BIOS _OSI(Linux) query ignored Sep 30 14:45:48 BrianLinux kernel: [ 0.086841] ACPI: Interpreter enabled Sep 30 14:45:48 BrianLinux kernel: [ 0.086852] ACPI: (supports S0 S3 S4 S5) Sep 30 14:45:48 BrianLinux kernel: [ 0.086876] ACPI: Using IOAPIC for interrupt routing Sep 30 14:45:48 BrianLinux kernel: [ 0.089437] ACPI: EC: non-query interrupt received, switching to interrupt mode Sep 30 14:45:48 BrianLinux kernel: [ 0.122029] ACPI: EC: GPE storm detected, transactions will use polling mode Sep 30 14:45:48 BrianLinux kernel: [ 0.396643] ACPI: EC: GPE = 0x19, I/O: command/status = 0x66, data = 0x62 Sep 30 14:45:48 BrianLinux kernel: [ 0.396646] ACPI: EC: driver started in poll mode Sep 30 14:45:48 BrianLinux kernel: [ 0.396993] ACPI: No dock devices found. Sep 30 14:45:48 BrianLinux kernel: [ 0.397623] ACPI: PCI Root Bridge [PCI0] (0000:00) Sep 30 14:45:48 BrianLinux kernel: [ 0.397734] pci 0000:00:02.0: reg 10 32bit mmio: [0xd0200000-0xd027ffff] Sep 30 14:45:48 BrianLinux kernel: [ 0.397741] pci 0000:00:02.0: reg 14 io port: [0x1800-0x1807] Sep 30 14:45:48 BrianLinux kernel: [ 0.397747] pci 0000:00:02.0: reg 18 32bit mmio: [0xc0000000-0xcfffffff] Sep 30 14:45:48 BrianLinux kernel: [ 0.397753] pci 0000:00:02.0: reg 1c 32bit mmio: [0xd0300000-0xd033ffff] Sep 30 14:45:48 BrianLinux kernel: [ 0.397801] pci 0000:00:02.1: reg 10 32bit mmio: [0xd0280000-0xd02fffff] Sep 30 14:45:48 BrianLinux kernel: [ 0.397927] pci 0000:00:1b.0: reg 10 64bit mmio: [0xd0340000-0xd0343fff] Sep 30 14:45:48 BrianLinux kernel: [ 0.397992] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold Sep 30 14:45:48 BrianLinux kernel: [ 0.397998] pci 0000:00:1b.0: PME# disabled Sep 30 14:45:48 BrianLinux kernel: [ 0.398095] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold Sep 30 14:45:48 BrianLinux kernel: [ 0.398101] pci 0000:00:1c.0: PME# disabled Sep 30 14:45:48 BrianLinux kernel: [ 0.398197] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold Sep 30 14:45:48 BrianLinux kernel: [ 0.398203] pci 0000:00:1c.2: PME# disabled Sep 30 14:45:48 BrianLinux kernel: [ 0.398276] pci 0000:00:1d.0: reg 20 io port: [0x1820-0x183f] Sep 30 14:45:48 BrianLinux kernel: [ 0.398345] pci 0000:00:1d.1: reg 20 io port: [0x1840-0x185f] Sep 30 14:45:48 BrianLinux kernel: [ 0.398415] pci 0000:00:1d.2: reg 20 io port: [0x1860-0x187f] Sep 30 14:45:48 BrianLinux kernel: [ 0.398492] pci 0000:00:1d.7: reg 10 32bit mmio: [0xd0544000-0xd05443ff] Sep 30 14:45:48 BrianLinux kernel: [ 0.398561] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold Sep 30 14:45:48 BrianLinux kernel: [ 0.398568] pci 0000:00:1d.7: PME# disabled Sep 30 14:45:48 BrianLinux kernel: [ 0.398750] pci 0000:00:1f.0: quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO Sep 30 14:45:48 BrianLinux kernel: [ 0.398755] pci 0000:00:1f.0: quirk: region 1180-11bf claimed by ICH6 GPIO Sep 30 14:45:48 BrianLinux kernel: [ 0.398820] pci 0000:00:1f.1: reg 10 io port: [0x00-0x07] Sep 30 14:45:48 BrianLinux kernel: [ 0.398829] pci 0000:00:1f.1: reg 14 io port: [0x00-0x03] Sep 30 14:45:48 BrianLinux kernel: [ 0.398838] pci 0000:00:1f.1: reg 18 io port: [0x00-0x07] Sep 30 14:45:48 BrianLinux kernel: [ 0.398847] pci 0000:00:1f.1: reg 1c io port: [0x00-0x03] Sep 30 14:45:48 BrianLinux kernel: [ 0.398857] pci 0000:00:1f.1: reg 20 io port: [0x1810-0x181f] Sep 30 14:45:48 BrianLinux kernel: [ 0.398929] pci 0000:00:1f.2: reg 10 io port: [0x18b0-0x18b7] Sep 30 14:45:48 BrianLinux kernel: [ 0.398939] pci 0000:00:1f.2: reg 14 io port: [0x18a4-0x18a7] Sep 30 14:45:48 BrianLinux kernel: [ 0.398948] pci 0000:00:1f.2: reg 18 io port: [0x18a8-0x18af] Sep 30 14:45:48 BrianLinux kernel: [ 0.398957] pci 0000:00:1f.2: reg 1c io port: [0x18a0-0x18a3] Sep 30 14:45:48 BrianLinux kernel: [ 0.398966] pci 0000:00:1f.2: reg 20 io port: [0x1890-0x189f] Sep 30 14:45:48 BrianLinux kernel: [ 0.398976] pci 0000:00:1f.2: reg 24 32bit mmio: [0xd0544400-0xd05447ff] Sep 30 14:45:48 BrianLinux kernel: [ 0.399016] pci 0000:00:1f.2: PME# supported from D3hot Sep 30 14:45:48 BrianLinux kernel: [ 0.399021] pci 0000:00:1f.2: PME# disabled Sep 30 14:45:48 BrianLinux kernel: [ 0.399091] pci 0000:00:1f.3: reg 20 io port: [0x18c0-0x18df] Sep 30 14:45:48 BrianLinux kernel: [ 0.399189] pci 0000:00:1c.0: bridge io port: [0x00-0xfff] Sep 30 14:45:48 BrianLinux kernel: [ 0.399195] pci 0000:00:1c.0: bridge 32bit mmio: [0x000000-0x0fffff] Sep 30 14:45:48 BrianLinux kernel: [ 0.399367] pci 0000:06:00.0: reg 10 32bit mmio: [0xd0000000-0xd0003fff] Sep 30 14:45:48 BrianLinux kernel: [ 0.399660] pci 0000:06:00.0: supports D1 D2 Sep 30 14:45:48 BrianLinux kernel: [ 0.399786] pci 0000:00:1c.2: bridge io port: [0x00-0xfff] Sep 30 14:45:48 BrianLinux kernel: [ 0.399792] pci 0000:00:1c.2: bridge 32bit mmio: [0x000000-0x0fffff] Sep 30 14:45:48 BrianLinux kernel: [ 0.399865] pci 0000:08:08.0: reg 10 io port: [0x2000-0x20ff] Sep 30 14:45:48 BrianLinux kernel: [ 0.399876] pci 0000:08:08.0: reg 14 32bit mmio: [0xd0100000-0xd01000ff] Sep 30 14:45:48 BrianLinux kernel: [ 0.399941] pci 0000:08:08.0: supports D1 D2 Sep 30 14:45:48 BrianLinux kernel: [ 0.399944] pci 0000:08:08.0: PME# supported from D1 D2 D3hot D3cold Sep 30 14:45:48 BrianLinux kernel: [ 0.399951] pci 0000:08:08.0: PME# disabled Sep 30 14:45:48 BrianLinux kernel: [ 0.400010] pci 0000:00:1e.0: transparent bridge Sep 30 14:45:48 BrianLinux kernel: [ 0.400016] pci 0000:00:1e.0: bridge io port: [0x2000-0x2fff] Sep 30 14:45:48 BrianLinux kernel: [ 0.400022] pci 0000:00:1e.0: bridge 32bit mmio: [0xd0100000-0xd01fffff] Sep 30 14:45:48 BrianLinux kernel: [ 0.400051] pci_bus 0000:00: on NUMA node 0 Sep 30 14:45:48 BrianLinux kernel: [ 0.400057] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] Sep 30 14:45:48 BrianLinux kernel: [ 0.400336] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT] Sep 30 14:45:48 BrianLinux kernel: [ 0.400430] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT] Sep 30 14:45:48 BrianLinux kernel: [ 0.400546] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT] Sep 30 14:45:48 BrianLinux kernel: [ 0.403675] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 14 15) *11 Sep 30 14:45:48 BrianLinux kernel: [ 0.403798] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 *4 5 6 7 11 12 14 15) Sep 30 14:45:48 BrianLinux kernel: [ 0.403919] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 *3 4 5 6 7 10 12 14 15) Sep 30 14:45:48 BrianLinux kernel: [ 0.404052] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *10 Sep 30 14:45:48 BrianLinux kernel: [ 0.404172] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled. Sep 30 14:45:48 BrianLinux kernel: [ 0.404294] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled. Sep 30 14:45:48 BrianLinux kernel: [ 0.404415] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 *7 10 12 14 15) Sep 30 14:45:48 BrianLinux kernel: [ 0.404534] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 *5 6 7 11 12 14 15) Sep 30 14:45:48 BrianLinux kernel: [ 0.404763] SCSI subsystem initialized Sep 30 14:45:48 BrianLinux kernel: [ 0.404822] libata version 3.00 loaded. Sep 30 14:45:48 BrianLinux kernel: [ 0.404910] usbcore: registered new interface driver usbfs Sep 30 14:45:48 BrianLinux kernel: [ 0.404934] usbcore: registered new interface driver hub Sep 30 14:45:48 BrianLinux kernel: [ 0.404964] usbcore: registered new device driver usb Sep 30 14:45:48 BrianLinux kernel: [ 0.405153] ACPI: WMI: Mapper loaded Sep 30 14:45:48 BrianLinux kernel: [ 0.405156] PCI: Using ACPI for IRQ routing Sep 30 14:45:48 BrianLinux kernel: [ 0.405160] pci 0000:00:1c.0: BAR 13: can't allocate resource Sep 30 14:45:48 BrianLinux kernel: [ 0.405163] pci 0000:00:1c.0: BAR 14: can't allocate resource Sep 30 14:45:48 BrianLinux kernel: [ 0.405167] pci 0000:00:1c.2: BAR 13: can't allocate resource Sep 30 14:45:48 BrianLinux kernel: [ 0.405170] pci 0000:00:1c.2: BAR 14: can't allocate resource Sep 30 14:45:48 BrianLinux kernel: [ 0.405215] pci 0000:06:00.0: BAR 0: no parent found for of device [0xd0000000-0xd0003fff] Sep 30 14:45:48 BrianLinux kernel: [ 0.405273] pci 0000:06:00.0: BAR 0: can't allocate resource Sep 30 14:45:48 BrianLinux kernel: [ 0.405419] Bluetooth: Core ver 2.15 Sep 30 14:45:48 BrianLinux kernel: [ 0.405454] NET: Registered protocol family 31 Sep 30 14:45:48 BrianLinux kernel: [ 0.405456] Bluetooth: HCI device and connection manager initialized Sep 30 14:45:48 BrianLinux kernel: [ 0.405460] Bluetooth: HCI socket layer initialized Sep 30 14:45:48 BrianLinux kernel: [ 0.405462] NetLabel: Initializing Sep 30 14:45:48 BrianLinux kernel: [ 0.405465] NetLabel: domain hash size = 128 Sep 30 14:45:48 BrianLinux kernel: [ 0.405467] NetLabel: protocols = UNLABELED CIPSOv4 Sep 30 14:45:48 BrianLinux kernel: [ 0.405483] NetLabel: unlabeled traffic allowed by default Sep 30 14:45:48 BrianLinux kernel: [ 0.405529] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 Sep 30 14:45:48 BrianLinux kernel: [ 0.405535] hpet0: 3 comparators, 64-bit 14.318180 MHz counter Sep 30 14:45:48 BrianLinux kernel: [ 0.409959] pnp: PnP ACPI init Sep 30 14:45:48 BrianLinux kernel: [ 0.409984] ACPI: bus type pnp registered Sep 30 14:45:48 BrianLinux kernel: [ 0.484585] pnp: PnP ACPI: found 10 devices Sep 30 14:45:48 BrianLinux kernel: [ 0.484588] ACPI: ACPI bus type pnp unregistered Sep 30 14:45:48 BrianLinux kernel: [ 0.484593] PnPBIOS: Disabled by ACPI PNP Sep 30 14:45:48 BrianLinux kernel: [ 0.484609] system 00:01: iomem range 0xe0000000-0xefffffff has been reserved Sep 30 14:45:48 BrianLinux kernel: [ 0.484614] system 00:01: iomem range 0xfed14000-0xfed17fff has been reserved Sep 30 14:45:48 BrianLinux kernel: [ 0.484618] system 00:01: iomem range 0xfed18000-0xfed18fff has been reserved Sep 30 14:45:48 BrianLinux kernel: [ 0.484622] system 00:01: iomem range 0xfed19000-0xfed19fff has been reserved Sep 30 14:45:48 BrianLinux kernel: [ 0.484626] system 00:01: iomem range 0xfed1c000-0xfed1ffff has been reserved Sep 30 14:45:48 BrianLinux kernel: [ 0.484630] system 00:01: iomem range 0xfed20000-0xfed3ffff has been reserved Sep 30 14:45:48 BrianLinux kernel: [ 0.484634] system 00:01: iomem range 0xfed40000-0xfed44fff has been reserved Sep 30 14:45:48 BrianLinux kernel: [ 0.484638] system 00:01: iomem range 0xfed45000-0xfed8ffff has been reserved Sep 30 14:45:48 BrianLinux kernel: [ 0.484652] system 00:04: iomem range 0xfed00000-0xfed003ff has been reserved Sep 30 14:45:48 BrianLinux kernel: [ 0.484660] system 00:06: ioport range 0x800-0x80f has been reserved Sep 30 14:45:48 BrianLinux kernel: [ 0.484664] system 00:06: ioport range 0x1000-0x107f has been reserved Sep 30 14:45:48 BrianLinux kernel: [ 0.484667] system 00:06: ioport range 0x1180-0x11bf has been reserved Sep 30 14:45:48 BrianLinux kernel: [ 0.484671] system 00:06: ioport range 0x1640-0x164f has been reserved Sep 30 14:45:48 BrianLinux kernel: [ 0.504000] Switched to high resolution mode on CPU 0 Sep 30 14:45:48 BrianLinux kernel: [ 0.519380] AppArmor: AppArmor Filesystem Enabled Sep 30 14:45:48 BrianLinux kernel: [ 0.519440] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:01 Sep 30 14:45:48 BrianLinux kernel: [ 0.519442] pci 0000:00:1c.0: IO window: disabled Sep 30 14:45:48 BrianLinux kernel: [ 0.519450] pci 0000:00:1c.0: MEM window: disabled Sep 30 14:45:48 BrianLinux kernel: [ 0.519455] pci 0000:00:1c.0: PREFETCH window: disabled Sep 30 14:45:48 BrianLinux kernel: [ 0.519474] pci 0000:00:1c.2: PCI bridge, secondary bus 0000:06 Sep 30 14:45:48 BrianLinux kernel: [ 0.519477] pci 0000:00:1c.2: IO window: disabled Sep 30 14:45:48 BrianLinux kernel: [ 0.519485] pci 0000:00:1c.2: MEM window: 0x80000000-0x800fffff Sep 30 14:45:48 BrianLinux kernel: [ 0.519490] pci 0000:00:1c.2: PREFETCH window: disabled Sep 30 14:45:48 BrianLinux kernel: [ 0.519496] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:08 Sep 30 14:45:48 BrianLinux kernel: [ 0.519501] pci 0000:00:1e.0: IO window: 0x2000-0x2fff Sep 30 14:45:48 BrianLinux kernel: [ 0.519508] pci 0000:00:1e.0: MEM window: 0xd0100000-0xd01fffff Sep 30 14:45:48 BrianLinux kernel: [ 0.519514] pci 0000:00:1e.0: PREFETCH window: disabled Sep 30 14:45:48 BrianLinux kernel: [ 0.519532] alloc irq_desc for 17 on node -1 Sep 30 14:45:48 BrianLinux kernel: [ 0.519535] alloc kstat_irqs on node -1 Sep 30 14:45:48 BrianLinux kernel: [ 0.519542] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 Sep 30 14:45:48 BrianLinux kernel: [ 0.519551] pci 0000:00:1c.0: setting latency timer to 64 Sep 30 14:45:48 BrianLinux kernel: [ 0.519562] pci 0000:00:1c.2: enabling device (0100 -> 0102) Sep 30 14:45:48 BrianLinux kernel: [ 0.519567] alloc irq_desc for 18 on node -1 Sep 30 14:45:48 BrianLinux kernel: [ 0.519569] alloc kstat_irqs on node -1 Sep 30 14:45:48 BrianLinux kernel: [ 0.519574] pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 Sep 30 14:45:48 BrianLinux kernel: [ 0.519582] pci 0000:00:1c.2: setting latency timer to 64 Sep 30 14:45:48 BrianLinux kernel: [ 0.519591] pci 0000:00:1e.0: setting latency timer to 64 Sep 30 14:45:48 BrianLinux kernel: [ 0.519598] pci_bus 0000:00: resource 0 io: [0x00-0xffff] Sep 30 14:45:48 BrianLinux kernel: [ 0.519602] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff] Sep 30 14:45:48 BrianLinux kernel: [ 0.519605] pci_bus 0000:01: resource 0 mem: [0x0-0xfff] Sep 30 14:45:48 BrianLinux kernel: [ 0.519608] pci_bus 0000:01: resource 1 mem: [0x0-0xfffff] Sep 30 14:45:48 BrianLinux kernel: [ 0.519612] pci_bus 0000:06: resource 0 mem: [0x0-0xfff] Sep 30 14:45:48 BrianLinux kernel: [ 0.519615] pci_bus 0000:06: resource 1 mem: [0x80000000-0x800fffff] Sep 30 14:45:48 BrianLinux kernel: [ 0.519619] pci_bus 0000:08: resource 0 io: [0x2000-0x2fff] Sep 30 14:45:48 BrianLinux kernel: [ 0.519623] pci_bus 0000:08: resource 1 mem: [0xd0100000-0xd01fffff] Sep 30 14:45:48 BrianLinux kernel: [ 0.519626] pci_bus 0000:08: resource 3 io: [0x00-0xffff] Sep 30 14:45:48 BrianLinux kernel: [ 0.519629] pci_bus 0000:08: resource 4 mem: [0x000000-0xffffffff] Sep 30 14:45:48 BrianLinux kernel: [ 0.519675] NET: Registered protocol family 2 Sep 30 14:45:48 BrianLinux kernel: [ 0.519786] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) Sep 30 14:45:48 BrianLinux kernel: [ 0.520170] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) Sep 30 14:45:48 BrianLinux kernel: [ 0.521076] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) Sep 30 14:45:48 BrianLinux kernel: [ 0.521581] TCP: Hash tables configured (established 131072 bind 65536) Sep 30 14:45:48 BrianLinux kernel: [ 0.521585] TCP reno registered Sep 30 14:45:48 BrianLinux kernel: [ 0.521717] NET: Registered protocol family 1 Sep 30 14:45:48 BrianLinux kernel: [ 0.521798] Trying to unpack rootfs image as initramfs... Sep 30 14:45:48 BrianLinux kernel: [ 0.745756] Freeing initrd memory: 6634k freed Sep 30 14:45:48 BrianLinux kernel: [ 0.750381] Simple Boot Flag at 0x36 set to 0x1 Sep 30 14:45:48 BrianLinux kernel: [ 0.750487] cpufreq-nforce2: No nForce2 chipset. Sep 30 14:45:48 BrianLinux kernel: [ 0.750531] Scanning for low memory corruption every 60 seconds Sep 30 14:45:48 BrianLinux kernel: [ 0.750717] audit: initializing netlink socket (disabled) Sep 30 14:45:48 BrianLinux kernel: [ 0.750741] type=2000 audit(1254321929.748:1): initialized Sep 30 14:45:48 BrianLinux kernel: [ 0.761643] highmem bounce pool size: 64 pages Sep 30 14:45:48 BrianLinux kernel: [ 0.761652] HugeTLB registered 4 MB page size, pre-allocated 0 pages Sep 30 14:45:48 BrianLinux kernel: [ 0.763415] VFS: Disk quotas dquot_6.5.2 Sep 30 14:45:48 BrianLinux kernel: [ 0.763488] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) Sep 30 14:45:48 BrianLinux kernel: [ 0.764180] fuse init (API version 7.12) Sep 30 14:45:48 BrianLinux kernel: [ 0.764283] msgmni has been set to 1706 Sep 30 14:45:48 BrianLinux kernel: [ 0.764520] alg: No test for stdrng (krng) Sep 30 14:45:48 BrianLinux kernel: [ 0.764536] io scheduler noop registered Sep 30 14:45:48 BrianLinux kernel: [ 0.764538] io scheduler anticipatory registered Sep 30 14:45:48 BrianLinux kernel: [ 0.764541] io scheduler deadline registered (default) Sep 30 14:45:48 BrianLinux kernel: [ 0.764595] io scheduler cfq registered Sep 30 14:45:48 BrianLinux kernel: [ 0.764611] pci 0000:00:02.0: Boot video device Sep 30 14:45:48 BrianLinux kernel: [ 2.364011] pci 0000:00:1d.7: EHCI: BIOS handoff failed (BIOS bug?) 01010001 Sep 30 14:45:48 BrianLinux kernel: [ 2.364278] alloc irq_desc for 24 on node -1 Sep 30 14:45:48 BrianLinux kernel: [ 2.364281] alloc kstat_irqs on node -1 Sep 30 14:45:48 BrianLinux kernel: [ 2.364296] pcieport-driver 0000:00:1c.0: irq 24 for MSI/MSI-X Sep 30 14:45:48 BrianLinux kernel: [ 2.364310] pcieport-driver 0000:00:1c.0: setting latency timer to 64 Sep 30 14:45:48 BrianLinux kernel: [ 2.364481] alloc irq_desc for 25 on node -1 Sep 30 14:45:48 BrianLinux kernel: [ 2.364483] alloc kstat_irqs on node -1 Sep 30 14:45:48 BrianLinux kernel: [ 2.364493] pcieport-driver 0000:00:1c.2: irq 25 for MSI/MSI-X Sep 30 14:45:48 BrianLinux kernel: [ 2.364505] pcieport-driver 0000:00:1c.2: setting latency timer to 64 Sep 30 14:45:48 BrianLinux kernel: [ 2.364625] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 Sep 30 14:45:48 BrianLinux kernel: [ 2.364723] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 Sep 30 14:45:48 BrianLinux kernel: [ 2.420069] ACPI: AC Adapter [ACAD] (off-line) Sep 30 14:45:48 BrianLinux kernel: [ 2.420159] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0 Sep 30 14:45:48 BrianLinux kernel: [ 2.420164] ACPI: Power Button [PWRF] Sep 30 14:45:48 BrianLinux kernel: [ 2.420224] input: Sleep Button as /devices/LNXSYSTM:00/LNXSLPBN:00/input/input1 Sep 30 14:45:48 BrianLinux kernel: [ 2.420228] ACPI: Sleep Button [SLPF] Sep 30 14:45:48 BrianLinux kernel: [ 2.420237] ACPI Error: Could not enable SleepButton event 20090521 evxfevnt-193 Sep 30 14:45:48 BrianLinux kernel: [ 2.420244] ACPI Warning: Could not enable fixed event 3 20090521 evxface-146 Sep 30 14:45:48 BrianLinux kernel: [ 2.420295] button: probe of LNXSLPBN:00 failed with error -22 Sep 30 14:45:48 BrianLinux kernel: [ 2.420344] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input2 Sep 30 14:45:48 BrianLinux kernel: [ 2.420388] ACPI: Lid Switch [LID] Sep 30 14:45:48 BrianLinux kernel: [ 2.420443] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input3 Sep 30 14:45:48 BrianLinux kernel: [ 2.420447] ACPI: Power Button [PWRB] Sep 30 14:45:48 BrianLinux kernel: [ 2.421240] Marking TSC unstable due to TSC halts in idle Sep 30 14:45:48 BrianLinux kernel: [ 2.421265] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3]) Sep 30 14:45:48 BrianLinux kernel: [ 2.421295] processor LNXCPU:00: registered as cooling_device0 Sep 30 14:45:48 BrianLinux kernel: [ 2.421300] ACPI: Processor [CPU0] (supports 8 throttling states) Sep 30 14:45:48 BrianLinux kernel: [ 2.680083] thermal LNXTHERM:01: registered as thermal_zone0 Sep 30 14:45:48 BrianLinux kernel: [ 2.680093] ACPI: Thermal Zone [TZ01] (33 C) Sep 30 14:45:48 BrianLinux kernel: [ 2.680258] thermal LNXTHERM:02: registered as thermal_zone1 Sep 30 14:45:48 BrianLinux kernel: [ 2.680267] ACPI: Thermal Zone [TZ02] (27 C) Sep 30 14:45:48 BrianLinux kernel: [ 2.680442] isapnp: Scanning for PnP cards... Sep 30 14:45:48 BrianLinux kernel: [ 3.034570] isapnp: No Plug & Play device found Sep 30 14:45:48 BrianLinux kernel: [ 3.204167] ACPI: Battery Slot [BAT1] (battery present) Sep 30 14:45:48 BrianLinux kernel: [ 3.204369] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled Sep 30 14:45:48 BrianLinux kernel: [ 3.205916] brd: module loaded Sep 30 14:45:48 BrianLinux kernel: [ 3.206464] loop: module loaded Sep 30 14:45:48 BrianLinux kernel: [ 3.206553] input: Macintosh mouse button emulation as /devices/virtual/input/input4 Sep 30 14:45:48 BrianLinux kernel: [ 3.206640] ahci 0000:00:1f.2: version 3.0 Sep 30 14:45:48 BrianLinux kernel: [ 3.206659] alloc irq_desc for 19 on node -1 Sep 30 14:45:48 BrianLinux kernel: [ 3.206662] alloc kstat_irqs on node -1 Sep 30 14:45:48 BrianLinux kernel: [ 3.206672] ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19 Sep 30 14:45:48 BrianLinux kernel: [ 3.206714] alloc irq_desc for 26 on node -1 Sep 30 14:45:48 BrianLinux kernel: [ 3.206716] alloc kstat_irqs on node -1 Sep 30 14:45:48 BrianLinux kernel: [ 3.206727] ahci 0000:00:1f.2: irq 26 for MSI/MSI-X Sep 30 14:45:48 BrianLinux kernel: [ 3.206813] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 4 ports 1.5 Gbps 0x1 impl SATA mode Sep 30 14:45:48 BrianLinux kernel: [ 3.206818] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part Sep 30 14:45:48 BrianLinux kernel: [ 3.206825] ahci 0000:00:1f.2: setting latency timer to 64 Sep 30 14:45:48 BrianLinux kernel: [ 3.206973] scsi0 : ahci Sep 30 14:45:48 BrianLinux kernel: [ 3.207090] scsi1 : ahci Sep 30 14:45:48 BrianLinux kernel: [ 3.207150] scsi2 : ahci Sep 30 14:45:48 BrianLinux kernel: [ 3.207211] scsi3 : ahci Sep 30 14:45:48 BrianLinux kernel: [ 3.207339] ata1: SATA max UDMA/133 abar m1024@0xd0544400 port 0xd0544500 irq 26 Sep 30 14:45:48 BrianLinux kernel: [ 3.207343] ata2: DUMMY Sep 30 14:45:48 BrianLinux kernel: [ 3.207345] ata3: DUMMY Sep 30 14:45:48 BrianLinux kernel: [ 3.207346] ata4: DUMMY Sep 30 14:45:48 BrianLinux kernel: [ 3.207436] ata_piix 0000:00:1f.1: version 2.13 Sep 30 14:45:48 BrianLinux kernel: [ 3.207451] ata_piix 0000:00:1f.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 Sep 30 14:45:48 BrianLinux kernel: [ 3.207494] ata_piix 0000:00:1f.1: setting latency timer to 64 Sep 30 14:45:48 BrianLinux kernel: [ 3.207601] scsi4 : ata_piix Sep 30 14:45:48 BrianLinux kernel: [ 3.207692] scsi5 : ata_piix Sep 30 14:45:48 BrianLinux kernel: [ 3.208376] ata5: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x1810 irq 14 Sep 30 14:45:48 BrianLinux kernel: [ 3.208380] ata6: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x1818 irq 15 Sep 30 14:45:48 BrianLinux kernel: [ 3.209339] Fixed MDIO Bus: probed Sep 30 14:45:48 BrianLinux kernel: [ 3.209382] PPP generic driver version 2.4.2 Sep 30 14:45:48 BrianLinux kernel: [ 3.209509] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver Sep 30 14:45:48 BrianLinux kernel: [ 3.209534] alloc irq_desc for 23 on node -1 Sep 30 14:45:48 BrianLinux kernel: [ 3.209537] alloc kstat_irqs on node -1 Sep 30 14:45:48 BrianLinux kernel: [ 3.209545] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23 Sep 30 14:45:48 BrianLinux kernel: [ 3.209562] ehci_hcd 0000:00:1d.7: setting latency timer to 64 Sep 30 14:45:48 BrianLinux kernel: [ 3.209566] ehci_hcd 0000:00:1d.7: EHCI Host Controller Sep 30 14:45:48 BrianLinux kernel: [ 3.209634] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1 Sep 30 14:45:48 BrianLinux kernel: [ 3.213545] ehci_hcd 0000:00:1d.7: debug port 1 Sep 30 14:45:48 BrianLinux kernel: [ 3.213553] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported Sep 30 14:45:48 BrianLinux kernel: [ 3.213583] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xd0544000 Sep 30 14:45:48 BrianLinux kernel: [ 3.217718] ata6: port disabled. ignoring. Sep 30 14:45:48 BrianLinux kernel: [ 3.228016] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 Sep 30 14:45:48 BrianLinux kernel: [ 3.228114] usb usb1: configuration #1 chosen from 1 choice Sep 30 14:45:48 BrianLinux kernel: [ 3.228151] hub 1-0:1.0: USB hub found Sep 30 14:45:48 BrianLinux kernel: [ 3.228162] hub 1-0:1.0: 6 ports detected Sep 30 14:45:48 BrianLinux kernel: [ 3.228239] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver Sep 30 14:45:48 BrianLinux kernel: [ 3.228260] uhci_hcd: USB Universal Host Controller Interface driver Sep 30 14:45:48 BrianLinux kernel: [ 3.228308] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 Sep 30 14:45:48 BrianLinux kernel: [ 3.228317] uhci_hcd 0000:00:1d.0: setting latency timer to 64 Sep 30 14:45:48 BrianLinux kernel: [ 3.228322] uhci_hcd 0000:00:1d.0: UHCI Host Controller Sep 30 14:45:48 BrianLinux kernel: [ 3.228363] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 Sep 30 14:45:48 BrianLinux kernel: [ 3.228393] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001820 Sep 30 14:45:48 BrianLinux kernel: [ 3.228486] usb usb2: configuration #1 chosen from 1 choice Sep 30 14:45:48 BrianLinux kernel: [ 3.228522] hub 2-0:1.0: USB hub found Sep 30 14:45:48 BrianLinux kernel: [ 3.228530] hub 2-0:1.0: 2 ports detected Sep 30 14:45:48 BrianLinux kernel: [ 3.228595] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 Sep 30 14:45:48 BrianLinux kernel: [ 3.228603] uhci_hcd 0000:00:1d.1: setting latency timer to 64 Sep 30 14:45:48 BrianLinux kernel: [ 3.228607] uhci_hcd 0000:00:1d.1: UHCI Host Controller Sep 30 14:45:48 BrianLinux kernel: [ 3.228642] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 Sep 30 14:45:48 BrianLinux kernel: [ 3.228681] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00001840 Sep 30 14:45:48 BrianLinux kernel: [ 3.228769] usb usb3: configuration #1 chosen from 1 choice Sep 30 14:45:48 BrianLinux kernel: [ 3.228799] hub 3-0:1.0: USB hub found Sep 30 14:45:48 BrianLinux kernel: [ 3.228807] hub 3-0:1.0: 2 ports detected Sep 30 14:45:48 BrianLinux kernel: [ 3.228863] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 Sep 30 14:45:48 BrianLinux kernel: [ 3.228871] uhci_hcd 0000:00:1d.2: setting latency timer to 64 Sep 30 14:45:48 BrianLinux kernel: [ 3.228875] uhci_hcd 0000:00:1d.2: UHCI Host Controller Sep 30 14:45:48 BrianLinux kernel: [ 3.228909] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 Sep 30 14:45:48 BrianLinux kernel: [ 3.228947] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001860 Sep 30 14:45:48 BrianLinux kernel: [ 3.229040] usb usb4: configuration #1 chosen from 1 choice Sep 30 14:45:48 BrianLinux kernel: [ 3.229070] hub 4-0:1.0: USB hub found Sep 30 14:45:48 BrianLinux kernel: [ 3.229078] hub 4-0:1.0: 2 ports detected Sep 30 14:45:48 BrianLinux kernel: [ 3.229192] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 Sep 30 14:45:48 BrianLinux kernel: [ 3.249063] i8042.c: Detected active multiplexing controller, rev 1.1. Sep 30 14:45:48 BrianLinux kernel: [ 3.266055] serio: i8042 KBD port at 0x60,0x64 irq 1 Sep 30 14:45:48 BrianLinux kernel: [ 3.266062] serio: i8042 AUX0 port at 0x60,0x64 irq 12 Sep 30 14:45:48 BrianLinux kernel: [ 3.266093] serio: i8042 AUX1 port at 0x60,0x64 irq 12 Sep 30 14:45:48 BrianLinux kernel: [ 3.266124] serio: i8042 AUX2 port at 0x60,0x64 irq 12 Sep 30 14:45:48 BrianLinux kernel: [ 3.266150] serio: i8042 AUX3 port at 0x60,0x64 irq 12 Sep 30 14:45:48 BrianLinux kernel: [ 3.266256] mice: PS/2 mouse device common for all mice Sep 30 14:45:48 BrianLinux kernel: [ 3.267650] rtc_cmos 00:09: RTC can wake from S4 Sep 30 14:45:48 BrianLinux kernel: [ 3.267693] rtc_cmos 00:09: rtc core: registered rtc_cmos as rtc0 Sep 30 14:45:48 BrianLinux kernel: [ 3.267729] rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs Sep 30 14:45:48 BrianLinux kernel: [ 3.267861] device-mapper: uevent: version 1.0.3 Sep 30 14:45:48 BrianLinux kernel: [ 3.267967] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com Sep 30 14:45:48 BrianLinux kernel: [ 3.268049] device-mapper: multipath: version 1.1.0 loaded Sep 30 14:45:48 BrianLinux kernel: [ 3.268053] device-mapper: multipath round-robin: version 1.0.0 loaded Sep 30 14:45:48 BrianLinux kernel: [ 3.268200] EISA: Probing bus 0 at eisa.0 Sep 30 14:45:48 BrianLinux kernel: [ 3.268209] Cannot allocate resource for EISA slot 1 Sep 30 14:45:48 BrianLinux kernel: [ 3.268212] Cannot allocate resource for EISA slot 2 Sep 30 14:45:48 BrianLinux kernel: [ 3.268240] EISA: Detected 0 cards. Sep 30 14:45:48 BrianLinux kernel: [ 3.268337] cpuidle: using governor ladder Sep 30 14:45:48 BrianLinux kernel: [ 3.268410] cpuidle: using governor menu Sep 30 14:45:48 BrianLinux kernel: [ 3.268976] TCP cubic registered Sep 30 14:45:48 BrianLinux kernel: [ 3.269169] NET: Registered protocol family 10 Sep 30 14:45:48 BrianLinux kernel: [ 3.269669] lo: Disabled Privacy Extensions Sep 30 14:45:48 BrianLinux kernel: [ 3.270023] NET: Registered protocol family 17 Sep 30 14:45:48 BrianLinux kernel: [ 3.270042] Bluetooth: L2CAP ver 2.13 Sep 30 14:45:48 BrianLinux kernel: [ 3.270046] Bluetooth: L2CAP socket layer initialized Sep 30 14:45:48 BrianLinux kernel: [ 3.270049] Bluetooth: SCO (Voice Link) ver 0.6 Sep 30 14:45:48 BrianLinux kernel: [ 3.270051] Bluetooth: SCO socket layer initialized Sep 30 14:45:48 BrianLinux kernel: [ 3.270086] Bluetooth: RFCOMM TTY layer initialized Sep 30 14:45:48 BrianLinux kernel: [ 3.270090] Bluetooth: RFCOMM socket layer initialized Sep 30 14:45:48 BrianLinux kernel: [ 3.270092] Bluetooth: RFCOMM ver 1.11 Sep 30 14:45:48 BrianLinux kernel: [ 3.270116] Using IPI No-Shortcut mode Sep 30 14:45:48 BrianLinux kernel: [ 3.270198] PM: Resume from disk failed. Sep 30 14:45:48 BrianLinux kernel: [ 3.270222] registered taskstats version 1 Sep 30 14:45:48 BrianLinux kernel: [ 3.270346] Magic number: 9:992:789 Sep 30 14:45:48 BrianLinux kernel: [ 3.270455] rtc_cmos 00:09: setting system clock to 2009-09-30 14:45:33 UTC (1254321933) Sep 30 14:45:48 BrianLinux kernel: [ 3.270459] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found Sep 30 14:45:48 BrianLinux kernel: [ 3.270462] EDD information not available. Sep 30 14:45:48 BrianLinux kernel: [ 3.281701] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input5 Sep 30 14:45:48 BrianLinux kernel: [ 3.396448] ata5.00: ATAPI: TSSTcorpCDW/DVD TS-L462D, HS00, max MWDMA2 Sep 30 14:45:48 BrianLinux kernel: [ 3.444350] ata5.00: configured for MWDMA2 Sep 30 14:45:48 BrianLinux kernel: [ 3.500041] Clocksource tsc unstable (delta = -143756989 ns) Sep 30 14:45:48 BrianLinux kernel: [ 3.524064] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) Sep 30 14:45:48 BrianLinux kernel: [ 3.525776] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 filtered out Sep 30 14:45:48 BrianLinux kernel: [ 3.572081] ata1.00: ATA-8: WDC WD3200BEVT-22ZCT0, 11.01A11, max UDMA/133 Sep 30 14:45:48 BrianLinux kernel: [ 3.572085] ata1.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32) Sep 30 14:45:48 BrianLinux kernel: [ 3.574666] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 filtered out Sep 30 14:45:48 BrianLinux kernel: [ 3.574837] ata1.00: configured for UDMA/133 Sep 30 14:45:48 BrianLinux kernel: [ 3.588180] scsi 0:0:0:0: Direct-Access ATA WDC WD3200BEVT-2 11.0 PQ: 0 ANSI: 5 Sep 30 14:45:48 BrianLinux kernel: [ 3.588349] sd 0:0:0:0: Attached scsi generic sg0 type 0 Sep 30 14:45:48 BrianLinux kernel: [ 3.588399] sd 0:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB) Sep 30 14:45:48 BrianLinux kernel: [ 3.588457] sd 0:0:0:0: [sda] Write Protect is off Sep 30 14:45:48 BrianLinux kernel: [ 3.588460] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 Sep 30 14:45:48 BrianLinux kernel: [ 3.588491] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA Sep 30 14:45:48 BrianLinux kernel: [ 3.588644] sda: sda1 sda2 sda3 < Sep 30 14:45:48 BrianLinux kernel: [ 3.622151] scsi 4:0:0:0: CD-ROM TSSTcorp CDW/DVD TS-L462D HS00 PQ: 0 ANSI: 5 Sep 30 14:45:48 BrianLinux kernel: [ 3.622702] sda5 > sda4 Sep 30 14:45:48 BrianLinux kernel: [ 3.648648] sd 0:0:0:0: [sda] Attached SCSI disk Sep 30 14:45:48 BrianLinux kernel: [ 3.717410] sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray Sep 30 14:45:48 BrianLinux kernel: [ 3.717414] Uniform CD-ROM driver Revision: 3.20 Sep 30 14:45:48 BrianLinux kernel: [ 3.717498] sr 4:0:0:0: Attached scsi CD-ROM sr0 Sep 30 14:45:48 BrianLinux kernel: [ 3.717553] sr 4:0:0:0: Attached scsi generic sg1 type 5 Sep 30 14:45:48 BrianLinux kernel: [ 3.717582] Freeing unused kernel memory: 540k freed Sep 30 14:45:48 BrianLinux kernel: [ 3.717921] Write protecting the kernel text: 4544k Sep 30 14:45:48 BrianLinux kernel: [ 3.717965] Write protecting the kernel read-only data: 1828k Sep 30 14:45:48 BrianLinux kernel: [ 4.112607] <6>8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004) Sep 30 14:45:48 BrianLinux kernel: [ 4.112644] 8139cp 0000:08:08.0: This (id 10ec:8139 rev 10) is not an 8139C+ compatible chip, use 8139too Sep 30 14:45:48 BrianLinux kernel: [ 4.137681] 8139too Fast Ethernet driver 0.9.28 Sep 30 14:45:48 BrianLinux kernel: [ 4.137737] 8139too 0000:08:08.0: enabling device (0105 -> 0107) Sep 30 14:45:48 BrianLinux kernel: [ 4.137749] alloc irq_desc for 16 on node -1 Sep 30 14:45:48 BrianLinux kernel: [ 4.137752] alloc kstat_irqs on node -1 Sep 30 14:45:48 BrianLinux kernel: [ 4.137761] 8139too 0000:08:08.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 Sep 30 14:45:48 BrianLinux kernel: [ 4.139223] eth0: RealTek RTL8139 at 0x2000, 00:16:d4:45:6a:b6, IRQ 16 Sep 30 14:45:48 BrianLinux kernel: [ 4.583967] PM: Starting manual resume from disk Sep 30 14:45:48 BrianLinux kernel: [ 4.583973] PM: Resume from partition 8:4 Sep 30 14:45:48 BrianLinux kernel: [ 4.583975] PM: Checking hibernation image. Sep 30 14:45:48 BrianLinux kernel: [ 4.584160] PM: Resume from disk failed. Sep 30 14:45:48 BrianLinux kernel: [ 4.620230] EXT4-fs (sda1): barriers enabled Sep 30 14:45:48 BrianLinux kernel: [ 4.637131] kjournald2 starting: pid 284, dev sda1:8, commit interval 5 seconds Sep 30 14:45:48 BrianLinux kernel: [ 4.637145] EXT4-fs (sda1): delayed allocation enabled Sep 30 14:45:48 BrianLinux kernel: [ 4.637150] EXT4-fs: file extents enabled Sep 30 14:45:48 BrianLinux kernel: [ 4.641372] EXT4-fs: mballoc enabled Sep 30 14:45:48 BrianLinux kernel: [ 4.641390] EXT4-fs (sda1): mounted filesystem with ordered data mode Sep 30 14:45:48 BrianLinux kernel: [ 5.513463] type=1505 audit(1254321935.742:2): operation="profile_load" pid=304 name=/usr/sbin/tcpdump Sep 30 14:45:48 BrianLinux kernel: [ 5.516690] type=1505 audit(1254321935.745:3): operation="profile_load" pid=305 name=/sbin/dhclient3 Sep 30 14:45:48 BrianLinux kernel: [ 5.517480] type=1505 audit(1254321935.745:4): operation="profile_load" pid=305 name=/usr/lib/NetworkManager/nm-dhcp-client.action Sep 30 14:45:48 BrianLinux kernel: [ 5.517923] type=1505 audit(1254321935.745:5): operation="profile_load" pid=305 name=/usr/lib/connman/scripts/dhclient-script Sep 30 14:45:48 BrianLinux kernel: [ 5.520164] type=1505 audit(1254321935.749:6): operation="profile_load" pid=306 name=/usr/sbin/mysqld-akonadi Sep 30 14:45:48 BrianLinux kernel: [ 5.537447] type=1505 audit(1254321935.765:7): operation="profile_load" pid=308 name=/usr/lib/cups/backend/cups-pdf Sep 30 14:45:48 BrianLinux kernel: [ 5.538408] type=1505 audit(1254321935.765:8): operation="profile_load" pid=308 name=/usr/sbin/cupsd Sep 30 14:45:48 BrianLinux kernel: [ 11.480690] udev: starting version 147 Sep 30 14:45:48 BrianLinux kernel: [ 11.804738] lp: driver loaded but no devices found Sep 30 14:45:48 BrianLinux kernel: [ 12.086389] intel_rng: FWH not detected Sep 30 14:45:48 BrianLinux kernel: [ 12.086444] Linux agpgart interface v0.103 Sep 30 14:45:48 BrianLinux kernel: [ 12.123600] lib80211: common routines for IEEE802.11 drivers Sep 30 14:45:48 BrianLinux kernel: [ 12.123605] lib80211_crypt: registered algorithm 'NULL' Sep 30 14:45:48 BrianLinux kernel: [ 12.127593] wl: module license 'MIXED/Proprietary' taints kernel. Sep 30 14:45:48 BrianLinux kernel: [ 12.127600] Disabling lock debugging due to kernel taint Sep 30 14:45:48 BrianLinux kernel: [ 12.172585] wl 0000:06:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 Sep 30 14:45:48 BrianLinux kernel: [ 12.172604] wl 0000:06:00.0: setting latency timer to 64 Sep 30 14:45:48 BrianLinux kernel: [ 12.180586] agpgart-intel 0000:00:00.0: Intel 945GM Chipset Sep 30 14:45:48 BrianLinux kernel: [ 12.180923] agpgart-intel 0000:00:00.0: detected 7932K stolen memory Sep 30 14:45:48 BrianLinux kernel: [ 12.184099] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xc0000000 Sep 30 14:45:48 BrianLinux kernel: [ 12.198654] lib80211_crypt: registered algorithm 'TKIP' Sep 30 14:45:48 BrianLinux kernel: [ 12.198820] eth1: Broadcom BCM4311 802.11 Wireless Controller 5.10.91.9 Sep 30 14:45:48 BrianLinux kernel: [ 12.520167] acpi device:07: registered as cooling_device1 Sep 30 14:45:48 BrianLinux kernel: [ 12.520331] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:06/input/input6 Sep 30 14:45:48 BrianLinux kernel: [ 12.520385] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) Sep 30 14:45:48 BrianLinux kernel: [ 12.633731] [drm] Initialized drm 1.1.0 20060810 Sep 30 14:45:48 BrianLinux kernel: [ 12.999523] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 Sep 30 14:45:48 BrianLinux kernel: [ 12.999532] i915 0000:00:02.0: setting latency timer to 64 Sep 30 14:45:48 BrianLinux kernel: [ 13.528834] [drm] TV-14: set mode NTSC 480i 0 Sep 30 14:45:48 BrianLinux kernel: [ 13.666730] [drm] fb0: inteldrmfb frame buffer device Sep 30 14:45:48 BrianLinux kernel: [ 13.666743] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0 Sep 30 14:45:48 BrianLinux kernel: [ 13.750910] [drm] LVDS-8: set mode 1280x800 17 Sep 30 14:45:48 BrianLinux kernel: [ 13.988928] Console: switching to colour frame buffer device 160x50 Sep 30 14:45:48 BrianLinux kernel: [ 14.126775] ip_tables: (C) 2000-2006 Netfilter Core Team Sep 30 14:45:48 BrianLinux kernel: [ 14.261513] Synaptics Touchpad, model: 1, fw: 6.2, id: 0x1a0b1, caps: 0xa04713/0x200000 Sep 30 14:45:48 BrianLinux kernel: [ 14.328062] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input7 Sep 30 14:45:48 BrianLinux kernel: [ 14.542282] alloc irq_desc for 22 on node -1 Sep 30 14:45:48 BrianLinux kernel: [ 14.542287] alloc kstat_irqs on node -1 Sep 30 14:45:48 BrianLinux kernel: [ 14.542297] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 Sep 30 14:45:48 BrianLinux kernel: [ 14.542340] HDA Intel 0000:00:1b.0: setting latency timer to 64 Sep 30 14:45:48 BrianLinux kernel: [ 17.313000] Adding 1558296k swap on /dev/sda4. Priority:-1 extents:1 across:1558296k Sep 30 14:45:48 BrianLinux kernel: [ 17.436733] EXT4-fs (sda1): internal journal on sda1:8 Sep 30 14:45:48 BrianLinux kernel: [ 18.081308] type=1505 audit(1254339948.309:9): operation="profile_replace" pid=673 name=/usr/sbin/tcpdump Sep 30 14:45:48 BrianLinux kernel: [ 18.083581] type=1505 audit(1254339948.309:10): operation="profile_replace" pid=674 name=/sbin/dhclient3 Sep 30 14:45:48 BrianLinux kernel: [ 18.084401] type=1505 audit(1254339948.313:11): operation="profile_replace" pid=674 name=/usr/lib/NetworkManager/nm-dhcp-client.action Sep 30 14:45:48 BrianLinux kernel: [ 18.084853] type=1505 audit(1254339948.313:12): operation="profile_replace" pid=674 name=/usr/lib/connman/scripts/dhclient-script Sep 30 14:45:48 BrianLinux kernel: [ 18.086811] type=1505 audit(1254339948.313:13): operation="profile_replace" pid=675 name=/usr/sbin/mysqld-akonadi Sep 30 14:45:49 BrianLinux NetworkManager: starting... Sep 30 14:45:49 BrianLinux NetworkManager: Trying to start the modem-manager... Sep 30 14:45:49 BrianLinux NetworkManager: SCPlugin-Ifupdown: init! Sep 30 14:45:49 BrianLinux NetworkManager: SCPlugin-Ifupdown: update_system_hostname Sep 30 14:45:49 BrianLinux NetworkManager: SCPluginIfupdown: management mode: unmanaged Sep 30 14:45:49 BrianLinux NetworkManager: SCPlugin-Ifupdown: devices added (path: /sys/devices/pci0000:00/0000:00:1c.2/0000:06:00.0/net/eth1, iface: eth1) Sep 30 14:45:49 BrianLinux NetworkManager: SCPlugin-Ifupdown: device added (path: /sys/devices/pci0000:00/0000:00:1c.2/0000:06:00.0/net/eth1, iface: eth1): no exported connection Sep 30 14:45:49 BrianLinux NetworkManager: SCPlugin-Ifupdown: devices added (path: /sys/devices/pci0000:00/0000:00:1e.0/0000:08:08.0/net/eth0, iface: eth0) Sep 30 14:45:49 BrianLinux NetworkManager: SCPlugin-Ifupdown: device added (path: /sys/devices/pci0000:00/0000:00:1e.0/0000:08:08.0/net/eth0, iface: eth0): no exported connection Sep 30 14:45:49 BrianLinux NetworkManager: SCPlugin-Ifupdown: devices added (path: /sys/devices/virtual/net/lo, iface: lo) Sep 30 14:45:49 BrianLinux NetworkManager: SCPlugin-Ifupdown: device added (path: /sys/devices/virtual/net/lo, iface: lo): no exported connection Sep 30 14:45:49 BrianLinux NetworkManager: SCPlugin-Ifupdown: end _init. Sep 30 14:45:49 BrianLinux NetworkManager: Loaded plugin ifupdown: (C) 2008 Canonical Ltd. To report bugs please use the NetworkManager mailing list. Sep 30 14:45:49 BrianLinux NetworkManager: Loaded plugin keyfile: (c) 2007 - 2008 Red Hat, Inc. To report bugs please use the NetworkManager mailing list. Sep 30 14:45:49 BrianLinux NetworkManager: Wireless now enabled by radio killswitch Sep 30 14:45:49 BrianLinux NetworkManager: SCPlugin-Ifupdown: (162298608) ... get_connections. Sep 30 14:45:49 BrianLinux NetworkManager: SCPlugin-Ifupdown: (162298608) ... get_connections (managed=false): return empty list. Sep 30 14:45:49 BrianLinux modem-manager: Loaded plugin Nokia Sep 30 14:45:49 BrianLinux modem-manager: Loaded plugin Sierra Sep 30 14:45:49 BrianLinux modem-manager: Loaded plugin ZTE Sep 30 14:45:49 BrianLinux modem-manager: Loaded plugin Novatel Sep 30 14:45:49 BrianLinux modem-manager: Loaded plugin Huawei Sep 30 14:45:49 BrianLinux modem-manager: Loaded plugin Option High-Speed Sep 30 14:45:49 BrianLinux modem-manager: Loaded plugin Ericsson MBM Sep 30 14:45:49 BrianLinux modem-manager: Loaded plugin Gobi Sep 30 14:45:49 BrianLinux modem-manager: Loaded plugin MotoC Sep 30 14:45:49 BrianLinux modem-manager: Loaded plugin Generic Sep 30 14:45:49 BrianLinux modem-manager: Loaded plugin Option Sep 30 14:45:49 BrianLinux NetworkManager: Ifupdown: get unmanaged devices count: 0 Sep 30 14:45:49 BrianLinux NetworkManager: (eth1): driver supports SSID scans (scan_capa 0x01). Sep 30 14:45:49 BrianLinux NetworkManager: (eth1): new 802.11 WiFi device (driver: 'wl') Sep 30 14:45:49 BrianLinux NetworkManager: (eth1): exported as /org/freedesktop/NetworkManager/Devices/0 Sep 30 14:45:49 BrianLinux NetworkManager: (eth1): now managed Sep 30 14:45:49 BrianLinux NetworkManager: (eth1): device state change: 1 -> 2 (reason 2) Sep 30 14:45:49 BrianLinux NetworkManager: (eth1): preparing device. Sep 30 14:45:49 BrianLinux NetworkManager: (eth1): deactivating device (reason: 2). Sep 30 14:45:49 BrianLinux NetworkManager: supplicant_interface_acquire: assertion `mgr_state == NM_SUPPLICANT_MANAGER_STATE_IDLE' failed Sep 30 14:45:49 BrianLinux NetworkManager: (eth0): new Ethernet device (driver: '8139too') Sep 30 14:45:49 BrianLinux NetworkManager: (eth0): exported as /org/freedesktop/NetworkManager/Devices/1 Sep 30 14:45:49 BrianLinux NetworkManager: (eth0): now managed Sep 30 14:45:49 BrianLinux NetworkManager: (eth0): device state change: 1 -> 2 (reason 2) Sep 30 14:45:49 BrianLinux NetworkManager: (eth0): bringing up device. Sep 30 14:45:49 BrianLinux NetworkManager: (eth0): preparing device. Sep 30 14:45:49 BrianLinux NetworkManager: (eth0): deactivating device (reason: 2). Sep 30 14:45:49 BrianLinux NetworkManager: Added default wired connection 'Auto eth0' for /sys/devices/pci0000:00/0000:00:1e.0/0000:08:08.0/net/eth0 Sep 30 14:45:49 BrianLinux NetworkManager: default_adapter_cb(): bluez error getting default adapter: The name org.bluez was not provided by any .service files Sep 30 14:45:49 BrianLinux NetworkManager: modem-manager is now available Sep 30 14:45:49 BrianLinux NetworkManager: Trying to start the supplicant... Sep 30 14:45:50 BrianLinux NetworkManager: (eth1): supplicant manager state: down -> idle Sep 30 14:45:50 BrianLinux NetworkManager: (eth1): device state change: 2 -> 3 (reason 0) Sep 30 14:45:50 BrianLinux NetworkManager: (eth1): supplicant interface state: starting -> ready Sep 30 14:45:51 BrianLinux kernel: [ 18.091230] type=1505 audit(1254339948.317:14): operation="profile_replace" pid=677 name=/usr/lib/cups/backend/cups-pdf Sep 30 14:45:51 BrianLinux kernel: [ 18.092252] type=1505 audit(1254339948.321:15): operation="profile_replace" pid=677 name=/usr/sbin/cupsd Sep 30 14:45:51 BrianLinux kernel: [ 19.727482] eth0: link down Sep 30 14:45:51 BrianLinux kernel: [ 19.727781] ADDRCONF(NETDEV_UP): eth0: link is not ready Sep 30 14:45:51 BrianLinux kernel: [ 20.346414] [drm] TV-14: set mode NTSC 480i 0 Sep 30 14:45:51 BrianLinux kernel: [ 20.542256] [drm] TV-14: set mode NTSC 480i 0 Sep 30 14:45:51 BrianLinux kernel: [ 20.673620] ppdev: user-space parallel port driver Sep 30 14:46:24 BrianLinux NetworkManager: Activation (eth1) starting connection 'ELCNet' Sep 30 14:46:24 BrianLinux NetworkManager: (eth1): device state change: 3 -> 4 (reason 0) Sep 30 14:46:24 BrianLinux NetworkManager: Activation (eth1) Stage 1 of 5 (Device Prepare) scheduled... Sep 30 14:46:24 BrianLinux NetworkManager: Activation (eth1) Stage 1 of 5 (Device Prepare) started... Sep 30 14:46:24 BrianLinux NetworkManager: Activation (eth1) Stage 2 of 5 (Device Configure) scheduled... Sep 30 14:46:24 BrianLinux NetworkManager: Activation (eth1) Stage 1 of 5 (Device Prepare) complete. Sep 30 14:46:24 BrianLinux NetworkManager: Activation (eth1) Stage 2 of 5 (Device Configure) starting... Sep 30 14:46:24 BrianLinux NetworkManager: (eth1): device state change: 4 -> 5 (reason 0) Sep 30 14:46:24 BrianLinux NetworkManager: Activation (eth1/wireless): access point 'ELCNet' has security, but secrets are required. Sep 30 14:46:24 BrianLinux NetworkManager: (eth1): device state change: 5 -> 6 (reason 0) Sep 30 14:46:24 BrianLinux NetworkManager: Activation (eth1) Stage 2 of 5 (Device Configure) complete. Sep 30 14:46:29 BrianLinux NetworkManager: secrets_update_setting(): Failed to update connection secrets: 1 ipv4 Sep 30 14:46:30 BrianLinux NetworkManager: secrets_update_setting(): Failed to update connection secrets: 1 802-1x Sep 30 14:46:30 BrianLinux NetworkManager: Activation (eth1) Stage 1 of 5 (Device Prepare) scheduled... Sep 30 14:46:30 BrianLinux NetworkManager: Activation (eth1) Stage 1 of 5 (Device Prepare) started... Sep 30 14:46:30 BrianLinux NetworkManager: (eth1): device state change: 6 -> 4 (reason 0) Sep 30 14:46:30 BrianLinux NetworkManager: Activation (eth1) Stage 2 of 5 (Device Configure) scheduled... Sep 30 14:46:30 BrianLinux NetworkManager: Activation (eth1) Stage 1 of 5 (Device Prepare) complete. Sep 30 14:46:30 BrianLinux NetworkManager: Activation (eth1) Stage 2 of 5 (Device Configure) starting... Sep 30 14:46:30 BrianLinux NetworkManager: (eth1): device state change: 4 -> 5 (reason 0) Sep 30 14:46:30 BrianLinux NetworkManager: Activation (eth1/wireless): connection 'ELCNet' has security, and secrets exist. No new secrets needed. Sep 30 14:46:30 BrianLinux NetworkManager: Config: added 'ssid' value 'ELCNet' Sep 30 14:46:30 BrianLinux NetworkManager: Config: added 'scan_ssid' value '1' Sep 30 14:46:30 BrianLinux NetworkManager: Config: added 'key_mgmt' value 'NONE' Sep 30 14:46:30 BrianLinux NetworkManager: Config: added 'wep_key0' value '' Sep 30 14:46:30 BrianLinux NetworkManager: Config: added 'wep_tx_keyidx' value '0' Sep 30 14:46:30 BrianLinux NetworkManager: nm_setting_802_1x_get_pkcs11_engine_path: assertion `NM_IS_SETTING_802_1X (setting)' failed Sep 30 14:46:30 BrianLinux NetworkManager: nm_setting_802_1x_get_pkcs11_module_path: assertion `NM_IS_SETTING_802_1X (setting)' failed Sep 30 14:46:30 BrianLinux NetworkManager: Activation (eth1) Stage 2 of 5 (Device Configure) complete. Sep 30 14:46:30 BrianLinux NetworkManager: Config: set interface ap_scan to 1 Sep 30 14:46:30 BrianLinux NetworkManager: (eth1): supplicant connection state: inactive -> scanning Sep 30 14:46:35 BrianLinux NetworkManager: (eth1): supplicant connection state: scanning -> associating Sep 30 14:46:35 BrianLinux NetworkManager: (eth1): supplicant connection state: associating -> associated Sep 30 14:46:35 BrianLinux NetworkManager: (eth1): supplicant connection state: associated -> completed Sep 30 14:46:35 BrianLinux NetworkManager: Activation (eth1/wireless) Stage 2 of 5 (Device Configure) successful. Connected to wireless network 'ELCNet'. Sep 30 14:46:35 BrianLinux NetworkManager: Activation (eth1) Stage 3 of 5 (IP Configure Start) scheduled. Sep 30 14:46:35 BrianLinux NetworkManager: Activation (eth1) Stage 3 of 5 (IP Configure Start) started... Sep 30 14:46:35 BrianLinux NetworkManager: (eth1): device state change: 5 -> 7 (reason 0) Sep 30 14:46:35 BrianLinux NetworkManager: Activation (eth1) Beginning DHCP transaction (timeout in 45 seconds) Sep 30 14:46:35 BrianLinux NetworkManager: dhclient started with pid 1450 Sep 30 14:46:35 BrianLinux NetworkManager: Activation (eth1) Stage 4 of 5 (IP6 Configure Get) scheduled... Sep 30 14:46:35 BrianLinux NetworkManager: Activation (eth1) Stage 3 of 5 (IP Configure Start) complete. Sep 30 14:46:35 BrianLinux NetworkManager: Activation (eth1) Stage 4 of 5 (IP6 Configure Get) started... Sep 30 14:46:35 BrianLinux NetworkManager: Activation (eth1) Stage 4 of 5 (IP6 Configure Get) complete. Sep 30 14:46:35 BrianLinux dhclient: Internet Systems Consortium DHCP Client V3.1.2 Sep 30 14:46:35 BrianLinux dhclient: Copyright 2004-2008 Internet Systems Consortium. Sep 30 14:46:35 BrianLinux dhclient: All rights reserved. Sep 30 14:46:35 BrianLinux dhclient: For info, please visit http://www.isc.org/sw/dhcp/ Sep 30 14:46:35 BrianLinux dhclient: Sep 30 14:46:35 BrianLinux NetworkManager: DHCP: device eth1 state changed (null) -> preinit Sep 30 14:46:35 BrianLinux dhclient: Listening on LPF/eth1/00:14:a5:f0:81:57 Sep 30 14:46:35 BrianLinux dhclient: Sending on LPF/eth1/00:14:a5:f0:81:57 Sep 30 14:46:35 BrianLinux dhclient: Sending on Socket/fallback Sep 30 14:46:37 BrianLinux dhclient: DHCPREQUEST of 192.168.2.193 on eth1 to 255.255.255.255 port 67 Sep 30 14:46:37 BrianLinux dhclient: DHCPACK of 192.168.2.193 from 192.168.2.1 Sep 30 14:46:37 BrianLinux NetworkManager: DHCP: device eth1 state changed preinit -> reboot Sep 30 14:46:37 BrianLinux NetworkManager: Activation (eth1) Stage 4 of 5 (IP4 Configure Get) scheduled... Sep 30 14:46:37 BrianLinux NetworkManager: Activation (eth1) Stage 4 of 5 (IP4 Configure Get) started... Sep 30 14:46:37 BrianLinux NetworkManager: address 192.168.2.193 Sep 30 14:46:37 BrianLinux NetworkManager: prefix 24 (255.255.255.0) Sep 30 14:46:37 BrianLinux NetworkManager: gateway 192.168.2.1 Sep 30 14:46:37 BrianLinux NetworkManager: nameserver '192.168.2.1' Sep 30 14:46:37 BrianLinux NetworkManager: Activation (eth1) Stage 5 of 5 (IP Configure Commit) scheduled... Sep 30 14:46:37 BrianLinux NetworkManager: Activation (eth1) Stage 4 of 5 (IP4 Configure Get) complete. Sep 30 14:46:37 BrianLinux NetworkManager: Activation (eth1) Stage 5 of 5 (IP Configure Commit) started... Sep 30 14:46:37 BrianLinux dhclient: bound to 192.168.2.193 -- renewal in 32855 seconds. Sep 30 14:46:38 BrianLinux NetworkManager: (eth1): device state change: 7 -> 8 (reason 0) Sep 30 14:46:38 BrianLinux NetworkManager: [1254339998.024345] periodic_update(): Roamed from BSSID 00:1B:11:EF:F7:26 (ELCNet) to (none) ((none)) Sep 30 14:46:38 BrianLinux NetworkManager: Policy set 'ELCNet' (eth1) as default for routing and DNS. Sep 30 14:46:38 BrianLinux NetworkManager: Activation (eth1) successful, device activated. Sep 30 14:46:38 BrianLinux NetworkManager: Activation (eth1) Stage 5 of 5 (IP Configure Commit) complete. Sep 30 14:57:11 BrianLinux kernel: [ 20.825078] [drm] TV-14: set mode NTSC 480i 0 Sep 30 14:57:11 BrianLinux kernel: [ 20.978062] [drm] TV-14: set mode NTSC 480i 0 Sep 30 14:57:11 BrianLinux kernel: [ 29.732017] eth1: no IPv6 routers present Sep 30 14:57:11 BrianLinux kernel: [ 30.199405] [drm] TV-14: set mode NTSC 480i 0 Sep 30 14:57:11 BrianLinux kernel: [ 30.342417] [drm] TV-14: set mode NTSC 480i 0 Sep 30 14:57:11 BrianLinux kernel: [ 30.715321] [drm] TV-14: set mode NTSC 480i 0 Sep 30 14:57:11 BrianLinux kernel: [ 30.859049] [drm] TV-14: set mode NTSC 480i 0 Sep 30 14:57:11 BrianLinux kernel: [ 701.196056] usb 1-1: new high speed USB device using ehci_hcd and address 2 Sep 30 14:57:11 BrianLinux kernel: [ 701.330360] usb 1-1: configuration #1 chosen from 1 choice Sep 30 14:57:16 BrianLinux kernel: [ 701.476265] Initializing USB Mass Storage driver... Sep 30 14:57:16 BrianLinux kernel: [ 701.476393] scsi6 : SCSI emulation for USB Mass Storage devices Sep 30 14:57:16 BrianLinux kernel: [ 701.476602] usbcore: registered new interface driver usb-storage Sep 30 14:57:16 BrianLinux kernel: [ 701.476607] USB Mass Storage support registered. Sep 30 14:57:16 BrianLinux kernel: [ 701.527621] usb-storage: device found at 2 Sep 30 14:57:16 BrianLinux kernel: [ 701.527626] usb-storage: waiting for device to settle before scanning Sep 30 14:57:16 BrianLinux kernel: [ 706.524175] usb-storage: device scan complete Sep 30 14:57:16 BrianLinux kernel: [ 706.525034] scsi 6:0:0:0: Direct-Access USB 2.0 USB Flash Drive 0.00 PQ: 0 ANSI: 2 Sep 30 14:57:16 BrianLinux kernel: [ 706.525479] sd 6:0:0:0: Attached scsi generic sg2 type 0 Sep 30 14:57:16 BrianLinux kernel: [ 706.588138] sd 6:0:0:0: [sdb] 15794176 512-byte logical blocks: (8.08 GB/7.53 GiB) Sep 30 14:57:16 BrianLinux kernel: [ 706.588756] sd 6:0:0:0: [sdb] Write Protect is off Sep 30 14:57:16 BrianLinux kernel: [ 706.588761] sd 6:0:0:0: [sdb] Mode Sense: 00 00 00 00 Sep 30 14:57:16 BrianLinux kernel: [ 706.588765] sd 6:0:0:0: [sdb] Assuming drive cache: write through Sep 30 14:57:16 BrianLinux kernel: [ 706.593256] sd 6:0:0:0: [sdb] Assuming drive cache: write through Sep 30 14:57:16 BrianLinux kernel: [ 706.593265] sdb: sdb1 Sep 30 14:57:16 BrianLinux kernel: [ 706.805142] sd 6:0:0:0: [sdb] Assuming drive cache: write through Sep 30 15:03:59 BrianLinux kernel: [ 706.805150] sd 6:0:0:0: [sdb] Attached SCSI removable disk Sep 30 15:03:59 BrianLinux kernel: [ 735.762933] usb 1-1: USB disconnect, address 2 Sep 30 15:03:59 BrianLinux kernel: [ 1104.240058] usb 1-1: new high speed USB device using ehci_hcd and address 3 Sep 30 15:03:59 BrianLinux kernel: [ 1104.374420] usb 1-1: configuration #1 chosen from 1 choice Sep 30 15:03:59 BrianLinux kernel: [ 1104.376297] scsi7 : SCSI emulation for USB Mass Storage devices Sep 30 15:03:59 BrianLinux kernel: [ 1104.376495] usb-storage: device found at 3 Sep 30 15:03:59 BrianLinux kernel: [ 1104.376498] usb-storage: waiting for device to settle before scanning Sep 30 15:03:59 BrianLinux kernel: [ 1109.376231] usb-storage: device scan complete Sep 30 15:03:59 BrianLinux kernel: [ 1109.376965] scsi 7:0:0:0: Direct-Access USB 2.0 USB Flash Drive 0.00 PQ: 0 ANSI: 2 Sep 30 15:03:59 BrianLinux kernel: [ 1109.377406] sd 7:0:0:0: Attached scsi generic sg2 type 0 Sep 30 15:03:59 BrianLinux kernel: [ 1109.433573] sd 7:0:0:0: [sdb] 15794176 512-byte logical blocks: (8.08 GB/7.53 GiB) Sep 30 15:03:59 BrianLinux kernel: [ 1109.434313] sd 7:0:0:0: [sdb] Write Protect is off Sep 30 15:03:59 BrianLinux kernel: [ 1109.434319] sd 7:0:0:0: [sdb] Mode Sense: 00 00 00 00 Sep 30 15:03:59 BrianLinux kernel: [ 1109.434322] sd 7:0:0:0: [sdb] Assuming drive cache: write through Sep 30 15:03:59 BrianLinux kernel: [ 1109.438440] sd 7:0:0:0: [sdb] Assuming drive cache: write through Sep 30 15:03:59 BrianLinux kernel: [ 1109.438449] sdb: sdb1 Sep 30 15:07:40 BrianLinux NetworkManager: (eth1): device state change: 8 -> 3 (reason 38) Sep 30 15:07:40 BrianLinux NetworkManager: (eth1): deactivating device (reason: 38). Sep 30 15:07:40 BrianLinux NetworkManager: nm_signal_handler(): Caught signal 15, shutting down normally. Sep 30 15:07:40 BrianLinux kernel: Kernel logging (proc) stopped. Sep 30 16:29:38 BrianLinux kernel: imklog 4.2.0, log source = /var/run/rsyslog/kmsg started. Sep 30 16:29:38 BrianLinux kernel: [ 0.000000] Initializing cgroup subsys cpuset Sep 30 16:29:38 BrianLinux kernel: [ 0.000000] Initializing cgroup subsys cpu Sep 30 16:29:38 BrianLinux kernel: [ 0.000000] Linux version 2.6.31-10-generic (buildd@rothera) (gcc version 4.4.1 (Ubuntu 4.4.1-4ubuntu1) ) #35-Ubuntu SMP Tue Sep 22 17:33:42 UTC 2009 (Ubuntu 2.6.31-10.35-generic) Sep 30 16:29:38 BrianLinux kernel: [ 0.000000] KERNEL supported cpus: Sep 30 16:29:38 BrianLinux kernel: [ 0.000000] Intel GenuineIntel Sep 30 16:29:38 BrianLinux kernel: [ 0.000000] AMD AuthenticAMD Sep 30 16:29:38 BrianLinux kernel: [ 0.000000] NSC Geode by NSC Sep 30 16:29:38 BrianLinux kernel: [ 0.000000] Cyrix CyrixInstead Sep 30 16:29:38 BrianLinux kernel: [ 0.000000] Centaur CentaurHauls Sep 30 16:29:38 BrianLinux kernel: [ 0.000000] Transmeta GenuineTMx86 Sep 30 16:29:38 BrianLinux kernel: [ 0.000000] Transmeta TransmetaCPU Sep 30 16:29:38 BrianLinux kernel: [ 0.000000] UMC UMC UMC UMC Sep 30 16:29:38 BrianLinux kernel: [ 0.000000] BIOS-provided physical RAM map: Sep 30 16:29:38 BrianLinux kernel: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable) Sep 30 16:29:38 BrianLinux kernel: [ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) Sep 30 16:29:38 BrianLinux kernel: [ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) Sep 30 16:29:38 BrianLinux kernel: [ 0.000000] BIOS-e820: 0000000000100000 - 000000007f680000 (usable) Sep 30 16:29:38 BrianLinux kernel: [ 0.000000] BIOS-e820: 000000007f680000 - 000000007f700000 (ACPI NVS) Sep 30 16:29:38 BrianLinux kernel: [ 0.000000] BIOS-e820: 000000007f700000 - 0000000080000000 (reserved) Sep 30 16:29:38 BrianLinux kernel: [ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) Sep 30 16:29:38 BrianLinux kernel: [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) Sep 30 16:29:38 BrianLinux kernel: [ 0.000000] BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved) Sep 30 16:29:38 BrianLinux kernel: [ 0.000000] BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved) Sep 30 16:29:38 BrianLinux kernel: [ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved) Sep 30 16:29:38 BrianLinux kernel: [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) Sep 30 16:29:38 BrianLinux kernel: [ 0.000000] BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved) Sep 30 16:29:38 BrianLinux kernel: [ 0.000000] DMI present. Sep 30 16:29:38 BrianLinux kernel: [ 0.000000] last_pfn = 0x7f680 max_arch_pfn = 0x100000 Sep 30 16:29:38 BrianLinux kernel: [ 0.000000] MTRR default type: uncachable Sep 30 16:29:38 BrianLinux kernel: [ 0.000000] MTRR fixed ranges enabled: Sep 30 16:29:38 BrianLinux kernel: [ 0.000000] 00000-9FFFF write-back Sep 30 16:29:38 BrianLinux kernel: [ 0.000000] A0000-BFFFF uncachable Sep 30 16:29:38 BrianLinux kernel: [ 0.000000] C0000-CFFFF write-protect Sep 30 16:29:38 BrianLinux kernel: [ 0.000000] D0000-DFFFF uncachable Sep 30 16:29:38 BrianLinux kernel: [ 0.000000] E0000-FFFFF write-protect Sep 30 16:29:38 BrianLinux kernel: [ 0.000000] MTRR variable ranges enabled: Sep 30 16:29:38 BrianLinux kernel: [ 0.000000] 0 base 000000000 mask F80000000 write-back Sep 30 16:29:38 BrianLinux kernel: [ 0.000000] 1 base 07F700000 mask FFFF00000 uncachable Sep 30 16:29:38 BrianLinux kernel: [ 0.000000] 2 base 07F800000 mask FFF800000 uncachable Sep 30 16:29:38 BrianLinux kernel: [ 0.000000] 3 disabled Sep 30 16:29:38 BrianLinux kernel: [ 0.000000] 4 disabled Sep 30 16:29:38 BrianLinux kernel: [ 0.000000] 5 disabled Sep 30 16:29:38 BrianLinux kernel: [ 0.000000] 6 disabled Sep 30 16:29:38 BrianLinux kernel: [ 0.000000] 7 disabled Sep 30 16:29:38 BrianLinux kernel: [ 0.000000] e820 update range: 0000000000002000 - 0000000000006000 (usable) ==> (reserved) Sep 30 16:29:38 BrianLinux kernel: [ 0.000000] Scanning 1 areas for low memory corruption Sep 30 16:29:38 BrianLinux kernel: [ 0.000000] modified physical RAM map: Sep 30 16:29:38 BrianLinux kernel: [ 0.000000] modified: 0000000000000000 - 0000000000002000 (usable) Sep 30 16:29:38 BrianLinux kernel: [ 0.000000] modified: 0000000000002000 - 0000000000006000 (reserved) Sep 30 16:29:38 BrianLinux kernel: [ 0.000000] modified: 0000000000006000 - 000000000009f800 (usable) Sep 30 16:29:38 BrianLinux kernel: [ 0.000000] modified: 000000000009f800 - 00000000000a0000 (reserved) Sep 30 16:29:38 BrianLinux kernel: [ 0.000000] modified: 00000000000e0000 - 0000000000100000 (reserved) Sep 30 16:29:38 BrianLinux kernel: [ 0.000000] modified: 0000000000100000 - 000000007f680000 (usable) Sep 30 16:29:38 BrianLinux kernel: [ 0.000000] modified: 000000007f680000 - 000000007f700000 (ACPI NVS) Sep 30 16:29:38 BrianLinux kernel: [ 0.000000] modified: 000000007f700000 - 0000000080000000 (reserved) Sep 30 16:29:38 BrianLinux kernel: [ 0.000000] modified: 00000000e0000000 - 00000000f0000000 (reserved) Sep 30 16:29:38 BrianLinux kernel: [ 0.000000] modified: 00000000fec00000 - 00000000fec10000 (reserved) Sep 30 16:29:38 BrianLinux kernel: [ 0.000000] modified: 00000000fed00000 - 00000000fed00400 (reserved) Sep 30 16:29:38 BrianLinux kernel: [ 0.000000] modified: 00000000fed14000 - 00000000fed1a000 (reserved) Sep 30 16:29:38 BrianLinux kernel: [ 0.000000] modified: 00000000fed1c000 - 00000000fed90000 (reserved) Sep 30 16:29:38 BrianLinux kernel: [ 0.000000] modified: 00000000fee00000 - 00000000fee01000 (reserved) Sep 30 16:29:38 BrianLinux kernel: [ 0.000000] modified: 00000000ff000000 - 0000000100000000 (reserved) Sep 30 16:29:38 BrianLinux kernel: [ 0.000000] initial memory mapped : 0 - 00c00000 Sep 30 16:29:38 BrianLinux kernel: [ 0.000000] init_memory_mapping: 0000000000000000-00000000377fe000 Sep 30 16:29:38 BrianLinux kernel: [ 0.000000] Using x86 segment limits to approximate NX protection Sep 30 16:29:38 BrianLinux kernel: [ 0.000000] 0000000000 - 0000400000 page 4k Sep 30 16:29:38 BrianLinux kernel: [ 0.000000] 0000400000 - 0037400000 page 2M Sep 30 16:29:38 BrianLinux kernel: [ 0.000000] 0037400000 - 00377fe000 page 4k Sep 30 16:29:38 BrianLinux kernel: [ 0.000000] kernel direct mapping tables up to 377fe000 @ 7000-c000 Sep 30 16:29:38 BrianLinux kernel: [ 0.000000] RAMDISK: 37975000 - 37fef9e8 Sep 30 16:29:38 BrianLinux kernel: [ 0.000000] Allocated new RAMDISK: 008a4000 - 00f1e9e8 Sep 30 16:29:38 BrianLinux kernel: [ 0.000000] Move RAMDISK from 0000000037975000 - 0000000037fef9e7 to 008a4000 - 00f1e9e7 Sep 30 16:29:38 BrianLinux kernel: [ 0.000000] ACPI: RSDP 000f6510 00014 (v00 PTLTD ) Sep 30 16:29:38 BrianLinux kernel: [ 0.000000] ACPI: RSDT 7f68cee1 0004C (v01 HPQOEM SLIC-MPC 06040000 LTP 00000000) Sep 30 16:29:38 BrianLinux kernel: [ 0.000000] ACPI: FACP 7f693c86 00074 (v01 HP NISSAN 06040000 LOHR 0000005A) Sep 30 16:29:38 BrianLinux kernel: [ 0.000000] ACPI: DSDT 7f68d80d 06479 (v01 HP NISSAN 06040000 INTL 20060608) Sep 30 16:29:38 BrianLinux kernel: [ 0.000000] ACPI: FACS 7f694fc0 00040 Sep 30 16:29:38 BrianLinux kernel: [ 0.000000] ACPI: APIC 7f693cfa 00068 (v01 HP NISSAN 06040000 LOHR 0000005A) Sep 30 16:29:38 BrianLinux kernel: [ 0.000000] ACPI: HPET 7f693d62 00038 (v01 HP NISSAN 06040000 LOHR 0000005A) Sep 30 16:29:38 BrianLinux kernel: [ 0.000000] ACPI: MCFG 7f693d9a 0003C (v01 HP NISSAN 06040000 LOHR 0000005A) Sep 30 16:29:38 BrianLinux kernel: [ 0.000000] ACPI: BOOT 7f693fd8 00028 (v01 PTLTD $SBFTBL$ 06040000 LTP 00000001) Sep 30 16:29:38 BrianLinux kernel: [ 0.000000] ACPI: SLIC 7f693e08 00176 (v01 HPQOEM SLIC-MPC 06040000 LOHR 00000000) Sep 30 16:29:38 BrianLinux kernel: [ 0.000000] ACPI: APIC 7f693f7e 0005A (v01 PTLTD APIC 06040000 LTP 00000000) Sep 30 16:29:38 BrianLinux kernel: [ 0.000000] ACPI: SSDT 7f68d5ff 0020A (v01 SataRe SataAhci 00001000 INTL 20060217) Sep 30 16:29:38 BrianLinux kernel: [ 0.000000] ACPI: SSDT 7f68d423 001DC (v01 PmRef Cpu0Cst 00003001 INTL 20060217) Sep 30 16:29:38 BrianLinux kernel: [ 0.000000] ACPI: SSDT 7f68cf2d 004F6 (v01 PmRef CpuPm 00003000 INTL 20060217) Sep 30 16:29:38 BrianLinux kernel: [ 0.000000] ACPI: BIOS bug: multiple APIC/MADT found, using 0 Sep 30 16:29:38 BrianLinux kernel: [ 0.000000] ACPI: If "acpi_apic_instance=2" works better, notify linux-acpi@vger.kernel.org Sep 30 16:29:38 BrianLinux kernel: [ 0.000000] ACPI: Local APIC address 0xfee00000 Sep 30 16:29:38 BrianLinux kernel: [ 0.000000] 1150MB HIGHMEM available. Sep 30 16:29:38 BrianLinux kernel: [ 0.000000] 887MB LOWMEM available. Sep 30 16:29:38 BrianLinux kernel: [ 0.000000] mapped low ram: 0 - 377fe000 Sep 30 16:29:38 BrianLinux kernel: [ 0.000000] low ram: 0 - 377fe000 Sep 30 16:29:38 BrianLinux kernel: [ 0.000000] node 0 low ram: 00000000 - 377fe000 Sep 30 16:29:38 BrianLinux kernel: [ 0.000000] node 0 bootmap 00008000 - 0000ef00 Sep 30 16:29:38 BrianLinux kernel: [ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 00377fe000] Sep 30 16:29:38 BrianLinux kernel: [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] Sep 30 16:29:38 BrianLinux kernel: [ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000] Sep 30 16:29:38 BrianLinux kernel: [ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000] Sep 30 16:29:38 BrianLinux kernel: [ 0.000000] #3 [0000100000 - 000089f080] TEXT DATA BSS ==> [0000100000 - 000089f080] Sep 30 16:29:38 BrianLinux kernel: [ 0.000000] #4 [000009f800 - 0000100000] BIOS reserved ==> [000009f800 - 0000100000] Sep 30 16:29:38 BrianLinux kernel: [ 0.000000] #5 [00008a0000 - 00008a312c] BRK ==> [00008a0000 - 00008a312c] Sep 30 16:29:38 BrianLinux kernel: [ 0.000000] #6 [0000007000 - 0000008000] PGTABLE ==> [0000007000 - 0000008000] Sep 30 16:29:38 BrianLinux kernel: [ 0.000000] #7 [00008a4000 - 0000f1e9e8] NEW RAMDISK ==> [00008a4000 - 0000f1e9e8] Sep 30 16:29:38 BrianLinux kernel: [ 0.000000] #8 [0000008000 - 000000f000] BOOTMAP ==> [0000008000 - 000000f000] Sep 30 16:29:38 BrianLinux kernel: [ 0.000000] found SMP MP-table at [c00f65c0] f65c0 Sep 30 16:29:38 BrianLinux kernel: [ 0.000000] Zone PFN ranges: Sep 30 16:29:38 BrianLinux kernel: [ 0.000000] DMA 0x00000000 -> 0x00001000 Sep 30 16:29:38 BrianLinux kernel: [ 0.000000] Normal 0x00001000 -> 0x000377fe Sep 30 16:29:38 BrianLinux kernel: [ 0.000000] HighMem 0x000377fe -> 0x0007f680 Sep 30 16:29:38 BrianLinux kernel: [ 0.000000] Movable zone start PFN for each node Sep 30 16:29:38 BrianLinux kernel: [ 0.000000] early_node_map[3] active PFN ranges Sep 30 16:29:38 BrianLinux kernel: [ 0.000000] 0: 0x00000000 -> 0x00000002 Sep 30 16:29:38 BrianLinux kernel: [ 0.000000] 0: 0x00000006 -> 0x0000009f Sep 30 16:29:38 BrianLinux kernel: [ 0.000000] 0: 0x00000100 -> 0x0007f680 Sep 30 16:29:38 BrianLinux kernel: [ 0.000000] On node 0 totalpages: 521755 Sep 30 16:29:38 BrianLinux kernel: [ 0.000000] free_area_init_node: node 0, pgdat c077b840, node_mem_map c1000000 Sep 30 16:29:38 BrianLinux kernel: [ 0.000000] DMA zone: 32 pages used for memmap Sep 30 16:29:38 BrianLinux kernel: [ 0.000000] DMA zone: 0 pages reserved Sep 30 16:29:38 BrianLinux kernel: [ 0.000000] DMA zone: 3963 pages, LIFO batch:0 Sep 30 16:29:38 BrianLinux kernel: [ 0.000000] Normal zone: 1744 pages used for memmap Sep 30 16:29:38 BrianLinux kernel: [ 0.000000] Normal zone: 221486 pages, LIFO batch:31 Sep 30 16:29:38 BrianLinux kernel: [ 0.000000] HighMem zone: 2302 pages used for memmap Sep 30 16:29:38 BrianLinux kernel: [ 0.000000] HighMem zone: 292228 pages, LIFO batch:31 Sep 30 16:29:38 BrianLinux kernel: [ 0.000000] Using APIC driver default Sep 30 16:29:38 BrianLinux kernel: [ 0.000000] ACPI: PM-Timer IO Port: 0x1008 Sep 30 16:29:38 BrianLinux kernel: [ 0.000000] ACPI: Local APIC address 0xfee00000 Sep 30 16:29:38 BrianLinux kernel: [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) Sep 30 16:29:38 BrianLinux kernel: [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] disabled) Sep 30 16:29:38 BrianLinux kernel: [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) Sep 30 16:29:38 BrianLinux kernel: [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) Sep 30 16:29:38 BrianLinux kernel: [ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) Sep 30 16:29:38 BrianLinux kernel: [ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23 Sep 30 16:29:38 BrianLinux kernel: [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) Sep 30 16:29:38 BrianLinux kernel: [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) Sep 30 16:29:38 BrianLinux kernel: [ 0.000000] ACPI: IRQ0 used by override. Sep 30 16:29:38 BrianLinux kernel: [ 0.000000] ACPI: IRQ2 used by override. Sep 30 16:29:38 BrianLinux kernel: [ 0.000000] ACPI: IRQ9 used by override. Sep 30 16:29:38 BrianLinux kernel: [ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs Sep 30 16:29:38 BrianLinux kernel: [ 0.000000] Using ACPI (MADT) for SMP configuration information Sep 30 16:29:38 BrianLinux kernel: [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 Sep 30 16:29:38 BrianLinux kernel: [ 0.000000] SMP: Allowing 2 CPUs, 1 hotplug CPUs Sep 30 16:29:38 BrianLinux kernel: [ 0.000000] nr_irqs_gsi: 24 Sep 30 16:29:38 BrianLinux kernel: [ 0.000000] PM: Registered nosave memory: 0000000000002000 - 0000000000006000 Sep 30 16:29:38 BrianLinux kernel: [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 Sep 30 16:29:38 BrianLinux kernel: [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000 Sep 30 16:29:38 BrianLinux kernel: [ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000 Sep 30 16:29:38 BrianLinux kernel: [ 0.000000] Allocating PCI resources starting at 80000000 (gap: 80000000:60000000) Sep 30 16:29:38 BrianLinux kernel: [ 0.000000] NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1 Sep 30 16:29:38 BrianLinux kernel: [ 0.000000] PERCPU: Embedded 14 pages at c1ffa000, static data 35036 bytes Sep 30 16:29:38 BrianLinux kernel: [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 517677 Sep 30 16:29:38 BrianLinux kernel: [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.31-10-generic root=UUID=a1103df1-e387-4fe4-9131-bb6f1d3dd864 ro quiet splash Sep 30 16:29:38 BrianLinux kernel: [ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes) Sep 30 16:29:38 BrianLinux kernel: [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Sep 30 16:29:38 BrianLinux kernel: [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Sep 30 16:29:38 BrianLinux kernel: [ 0.000000] Enabling fast FPU save and restore... done. Sep 30 16:29:38 BrianLinux kernel: [ 0.000000] Enabling unmasked SIMD FPU exception support... done. Sep 30 16:29:38 BrianLinux kernel: [ 0.000000] Initializing CPU#0 Sep 30 16:29:38 BrianLinux kernel: [ 0.000000] allocated 10437120 bytes of page_cgroup Sep 30 16:29:38 BrianLinux kernel: [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups Sep 30 16:29:38 BrianLinux kernel: [ 0.000000] Initializing HighMem for node 0 (000377fe:0007f680) Sep 30 16:29:38 BrianLinux kernel: [ 0.000000] Memory: 2044144k/2087424k available (4543k kernel code, 41948k reserved, 2129k data, 540k init, 1178120k highmem) Sep 30 16:29:38 BrianLinux kernel: [ 0.000000] virtual kernel memory layout: Sep 30 16:29:38 BrianLinux kernel: [ 0.000000] fixmap : 0xfff1d000 - 0xfffff000 ( 904 kB) Sep 30 16:29:38 BrianLinux kernel: [ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB) Sep 30 16:29:38 BrianLinux kernel: [ 0.000000] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB) Sep 30 16:29:38 BrianLinux kernel: [ 0.000000] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB) Sep 30 16:29:38 BrianLinux kernel: [ 0.000000] .init : 0xc0785000 - 0xc080c000 ( 540 kB) Sep 30 16:29:38 BrianLinux kernel: [ 0.000000] .data : 0xc056fd84 - 0xc07841a8 (2129 kB) Sep 30 16:29:38 BrianLinux kernel: [ 0.000000] .text : 0xc0100000 - 0xc056fd84 (4543 kB) Sep 30 16:29:38 BrianLinux kernel: [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok. Sep 30 16:29:38 BrianLinux kernel: [ 0.000000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 Sep 30 16:29:38 BrianLinux kernel: [ 0.000000] NR_IRQS:2304 nr_irqs:424 Sep 30 16:29:38 BrianLinux kernel: [ 0.000000] Fast TSC calibration using PIT Sep 30 16:29:38 BrianLinux kernel: [ 0.000000] Detected 1596.094 MHz processor. Sep 30 16:29:38 BrianLinux kernel: [ 0.001860] Console: colour VGA+ 80x25 Sep 30 16:29:38 BrianLinux kernel: [ 0.001865] console [tty0] enabled Sep 30 16:29:38 BrianLinux kernel: [ 0.002079] hpet clockevent registered Sep 30 16:29:38 BrianLinux kernel: [ 0.002084] HPET: 3 timers in total, 0 timers will be used for per-cpu timer Sep 30 16:29:38 BrianLinux kernel: [ 0.002092] Calibrating delay loop (skipped), value calculated using timer frequency.. 3192.18 BogoMIPS (lpj=6384376) Sep 30 16:29:38 BrianLinux kernel: [ 0.002116] Security Framework initialized Sep 30 16:29:38 BrianLinux kernel: [ 0.002144] AppArmor: AppArmor initialized Sep 30 16:29:38 BrianLinux kernel: [ 0.002153] Mount-cache hash table entries: 512 Sep 30 16:29:38 BrianLinux kernel: [ 0.002321] Initializing cgroup subsys ns Sep 30 16:29:38 BrianLinux kernel: [ 0.002327] Initializing cgroup subsys cpuacct Sep 30 16:29:38 BrianLinux kernel: [ 0.002332] Initializing cgroup subsys memory Sep 30 16:29:38 BrianLinux kernel: [ 0.002342] Initializing cgroup subsys freezer Sep 30 16:29:38 BrianLinux kernel: [ 0.002345] Initializing cgroup subsys net_cls Sep 30 16:29:38 BrianLinux kernel: [ 0.002364] CPU: L1 I cache: 32K, L1 D cache: 32K Sep 30 16:29:38 BrianLinux kernel: [ 0.002367] CPU: L2 cache: 1024K Sep 30 16:29:38 BrianLinux kernel: [ 0.002372] using mwait in idle threads. Sep 30 16:29:38 BrianLinux kernel: [ 0.002383] Performance Counters: no PMU driver, software counters only. Sep 30 16:29:38 BrianLinux kernel: [ 0.002390] Checking 'hlt' instruction... OK. Sep 30 16:29:38 BrianLinux kernel: [ 0.017036] SMP alternatives: switching to UP code Sep 30 16:29:38 BrianLinux kernel: [ 0.024008] ACPI: Core revision 20090521 Sep 30 16:29:38 BrianLinux kernel: [ 0.040461] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 Sep 30 16:29:38 BrianLinux kernel: [ 0.082001] CPU0: Intel(R) Celeron(R) M CPU 420 @ 1.60GHz stepping 08 Sep 30 16:29:38 BrianLinux kernel: [ 0.084001] Brought up 1 CPUs Sep 30 16:29:38 BrianLinux kernel: [ 0.084001] Total of 1 processors activated (3192.18 BogoMIPS). Sep 30 16:29:38 BrianLinux kernel: [ 0.084001] CPU0 attaching NULL sched-domain. Sep 30 16:29:38 BrianLinux kernel: [ 0.084001] Booting paravirtualized kernel on bare hardware Sep 30 16:29:38 BrianLinux kernel: [ 0.084001] regulator: core version 0.5 Sep 30 16:29:38 BrianLinux kernel: [ 0.084001] Time: 16:29:20 Date: 09/30/09 Sep 30 16:29:38 BrianLinux kernel: [ 0.084001] NET: Registered protocol family 16 Sep 30 16:29:38 BrianLinux kernel: [ 0.084001] EISA bus registered Sep 30 16:29:38 BrianLinux kernel: [ 0.084001] ACPI: bus type pci registered Sep 30 16:29:38 BrianLinux kernel: [ 0.084001] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255 Sep 30 16:29:38 BrianLinux kernel: [ 0.084001] PCI: MCFG area at e0000000 reserved in E820 Sep 30 16:29:38 BrianLinux kernel: [ 0.084001] PCI: Using MMCONFIG for extended config space Sep 30 16:29:38 BrianLinux kernel: [ 0.084001] PCI: Using configuration type 1 for base access Sep 30 16:29:38 BrianLinux kernel: [ 0.084001] bio: create slab at 0 Sep 30 16:29:38 BrianLinux kernel: [ 0.084001] ACPI: EC: Look up EC in DSDT Sep 30 16:29:38 BrianLinux kernel: [ 0.086112] ACPI: BIOS _OSI(Linux) query ignored Sep 30 16:29:38 BrianLinux kernel: [ 0.086832] ACPI: Interpreter enabled Sep 30 16:29:38 BrianLinux kernel: [ 0.086843] ACPI: (supports S0 S3 S4 S5) Sep 30 16:29:38 BrianLinux kernel: [ 0.086867] ACPI: Using IOAPIC for interrupt routing Sep 30 16:29:38 BrianLinux kernel: [ 0.094051] ACPI: EC: non-query interrupt received, switching to interrupt mode Sep 30 16:29:38 BrianLinux kernel: [ 0.141292] ACPI: EC: GPE storm detected, transactions will use polling mode Sep 30 16:29:38 BrianLinux kernel: [ 0.340638] ACPI: EC: GPE = 0x19, I/O: command/status = 0x66, data = 0x62 Sep 30 16:29:38 BrianLinux kernel: [ 0.340641] ACPI: EC: driver started in poll mode Sep 30 16:29:38 BrianLinux kernel: [ 0.340988] ACPI: No dock devices found. Sep 30 16:29:38 BrianLinux kernel: [ 0.341618] ACPI: PCI Root Bridge [PCI0] (0000:00) Sep 30 16:29:38 BrianLinux kernel: [ 0.341729] pci 0000:00:02.0: reg 10 32bit mmio: [0xd0200000-0xd027ffff] Sep 30 16:29:38 BrianLinux kernel: [ 0.341736] pci 0000:00:02.0: reg 14 io port: [0x1800-0x1807] Sep 30 16:29:38 BrianLinux kernel: [ 0.341742] pci 0000:00:02.0: reg 18 32bit mmio: [0xc0000000-0xcfffffff] Sep 30 16:29:38 BrianLinux kernel: [ 0.341749] pci 0000:00:02.0: reg 1c 32bit mmio: [0xd0300000-0xd033ffff] Sep 30 16:29:38 BrianLinux kernel: [ 0.341796] pci 0000:00:02.1: reg 10 32bit mmio: [0xd0280000-0xd02fffff] Sep 30 16:29:38 BrianLinux kernel: [ 0.341924] pci 0000:00:1b.0: reg 10 64bit mmio: [0xd0340000-0xd0343fff] Sep 30 16:29:38 BrianLinux kernel: [ 0.341990] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold Sep 30 16:29:38 BrianLinux kernel: [ 0.341996] pci 0000:00:1b.0: PME# disabled Sep 30 16:29:38 BrianLinux kernel: [ 0.342094] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold Sep 30 16:29:38 BrianLinux kernel: [ 0.342100] pci 0000:00:1c.0: PME# disabled Sep 30 16:29:38 BrianLinux kernel: [ 0.342197] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold Sep 30 16:29:38 BrianLinux kernel: [ 0.342202] pci 0000:00:1c.2: PME# disabled Sep 30 16:29:38 BrianLinux kernel: [ 0.342276] pci 0000:00:1d.0: reg 20 io port: [0x1820-0x183f] Sep 30 16:29:38 BrianLinux kernel: [ 0.342345] pci 0000:00:1d.1: reg 20 io port: [0x1840-0x185f] Sep 30 16:29:38 BrianLinux kernel: [ 0.342415] pci 0000:00:1d.2: reg 20 io port: [0x1860-0x187f] Sep 30 16:29:38 BrianLinux kernel: [ 0.342492] pci 0000:00:1d.7: reg 10 32bit mmio: [0xd0544000-0xd05443ff] Sep 30 16:29:38 BrianLinux kernel: [ 0.342561] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold Sep 30 16:29:38 BrianLinux kernel: [ 0.342567] pci 0000:00:1d.7: PME# disabled Sep 30 16:29:38 BrianLinux kernel: [ 0.342748] pci 0000:00:1f.0: quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO Sep 30 16:29:38 BrianLinux kernel: [ 0.342754] pci 0000:00:1f.0: quirk: region 1180-11bf claimed by ICH6 GPIO Sep 30 16:29:38 BrianLinux kernel: [ 0.342819] pci 0000:00:1f.1: reg 10 io port: [0x00-0x07] Sep 30 16:29:38 BrianLinux kernel: [ 0.342828] pci 0000:00:1f.1: reg 14 io port: [0x00-0x03] Sep 30 16:29:38 BrianLinux kernel: [ 0.342837] pci 0000:00:1f.1: reg 18 io port: [0x00-0x07] Sep 30 16:29:38 BrianLinux kernel: [ 0.342847] pci 0000:00:1f.1: reg 1c io port: [0x00-0x03] Sep 30 16:29:38 BrianLinux kernel: [ 0.342856] pci 0000:00:1f.1: reg 20 io port: [0x1810-0x181f] Sep 30 16:29:38 BrianLinux kernel: [ 0.342927] pci 0000:00:1f.2: reg 10 io port: [0x18b0-0x18b7] Sep 30 16:29:38 BrianLinux kernel: [ 0.342937] pci 0000:00:1f.2: reg 14 io port: [0x18a4-0x18a7] Sep 30 16:29:38 BrianLinux kernel: [ 0.342946] pci 0000:00:1f.2: reg 18 io port: [0x18a8-0x18af] Sep 30 16:29:38 BrianLinux kernel: [ 0.342955] pci 0000:00:1f.2: reg 1c io port: [0x18a0-0x18a3] Sep 30 16:29:38 BrianLinux kernel: [ 0.342964] pci 0000:00:1f.2: reg 20 io port: [0x1890-0x189f] Sep 30 16:29:38 BrianLinux kernel: [ 0.342973] pci 0000:00:1f.2: reg 24 32bit mmio: [0xd0544400-0xd05447ff] Sep 30 16:29:38 BrianLinux kernel: [ 0.343013] pci 0000:00:1f.2: PME# supported from D3hot Sep 30 16:29:38 BrianLinux kernel: [ 0.343018] pci 0000:00:1f.2: PME# disabled Sep 30 16:29:38 BrianLinux kernel: [ 0.343088] pci 0000:00:1f.3: reg 20 io port: [0x18c0-0x18df] Sep 30 16:29:38 BrianLinux kernel: [ 0.343185] pci 0000:00:1c.0: bridge io port: [0x00-0xfff] Sep 30 16:29:38 BrianLinux kernel: [ 0.343192] pci 0000:00:1c.0: bridge 32bit mmio: [0x000000-0x0fffff] Sep 30 16:29:38 BrianLinux kernel: [ 0.343368] pci 0000:06:00.0: reg 10 32bit mmio: [0xd0000000-0xd0003fff] Sep 30 16:29:38 BrianLinux kernel: [ 0.343655] pci 0000:06:00.0: supports D1 D2 Sep 30 16:29:38 BrianLinux kernel: [ 0.343786] pci 0000:00:1c.2: bridge io port: [0x00-0xfff] Sep 30 16:29:38 BrianLinux kernel: [ 0.343792] pci 0000:00:1c.2: bridge 32bit mmio: [0x000000-0x0fffff] Sep 30 16:29:38 BrianLinux kernel: [ 0.343866] pci 0000:08:08.0: reg 10 io port: [0x2000-0x20ff] Sep 30 16:29:38 BrianLinux kernel: [ 0.343877] pci 0000:08:08.0: reg 14 32bit mmio: [0xd0100000-0xd01000ff] Sep 30 16:29:38 BrianLinux kernel: [ 0.343942] pci 0000:08:08.0: supports D1 D2 Sep 30 16:29:38 BrianLinux kernel: [ 0.343945] pci 0000:08:08.0: PME# supported from D1 D2 D3hot D3cold Sep 30 16:29:38 BrianLinux kernel: [ 0.343951] pci 0000:08:08.0: PME# disabled Sep 30 16:29:38 BrianLinux kernel: [ 0.344010] pci 0000:00:1e.0: transparent bridge Sep 30 16:29:38 BrianLinux kernel: [ 0.344016] pci 0000:00:1e.0: bridge io port: [0x2000-0x2fff] Sep 30 16:29:38 BrianLinux kernel: [ 0.344022] pci 0000:00:1e.0: bridge 32bit mmio: [0xd0100000-0xd01fffff] Sep 30 16:29:38 BrianLinux kernel: [ 0.344051] pci_bus 0000:00: on NUMA node 0 Sep 30 16:29:38 BrianLinux kernel: [ 0.344058] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] Sep 30 16:29:38 BrianLinux kernel: [ 0.344337] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT] Sep 30 16:29:38 BrianLinux kernel: [ 0.344433] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT] Sep 30 16:29:38 BrianLinux kernel: [ 0.344548] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT] Sep 30 16:29:38 BrianLinux kernel: [ 0.347672] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 14 15) *11 Sep 30 16:29:38 BrianLinux kernel: [ 0.347799] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 *4 5 6 7 11 12 14 15) Sep 30 16:29:38 BrianLinux kernel: [ 0.347918] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 *3 4 5 6 7 10 12 14 15) Sep 30 16:29:38 BrianLinux kernel: [ 0.348050] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *10 Sep 30 16:29:38 BrianLinux kernel: [ 0.348170] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled. Sep 30 16:29:38 BrianLinux kernel: [ 0.348290] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled. Sep 30 16:29:38 BrianLinux kernel: [ 0.348411] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 *7 10 12 14 15) Sep 30 16:29:38 BrianLinux kernel: [ 0.348530] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 *5 6 7 11 12 14 15) Sep 30 16:29:38 BrianLinux kernel: [ 0.348753] SCSI subsystem initialized Sep 30 16:29:38 BrianLinux kernel: [ 0.348814] libata version 3.00 loaded. Sep 30 16:29:38 BrianLinux kernel: [ 0.348902] usbcore: registered new interface driver usbfs Sep 30 16:29:38 BrianLinux kernel: [ 0.348927] usbcore: registered new interface driver hub Sep 30 16:29:38 BrianLinux kernel: [ 0.348957] usbcore: registered new device driver usb Sep 30 16:29:38 BrianLinux kernel: [ 0.349144] ACPI: WMI: Mapper loaded Sep 30 16:29:38 BrianLinux kernel: [ 0.349147] PCI: Using ACPI for IRQ routing Sep 30 16:29:38 BrianLinux kernel: [ 0.349152] pci 0000:00:1c.0: BAR 13: can't allocate resource Sep 30 16:29:38 BrianLinux kernel: [ 0.349155] pci 0000:00:1c.0: BAR 14: can't allocate resource Sep 30 16:29:38 BrianLinux kernel: [ 0.349158] pci 0000:00:1c.2: BAR 13: can't allocate resource Sep 30 16:29:38 BrianLinux kernel: [ 0.349161] pci 0000:00:1c.2: BAR 14: can't allocate resource Sep 30 16:29:38 BrianLinux kernel: [ 0.349203] pci 0000:06:00.0: BAR 0: no parent found for of device [0xd0000000-0xd0003fff] Sep 30 16:29:38 BrianLinux kernel: [ 0.349261] pci 0000:06:00.0: BAR 0: can't allocate resource Sep 30 16:29:38 BrianLinux kernel: [ 0.349407] Bluetooth: Core ver 2.15 Sep 30 16:29:38 BrianLinux kernel: [ 0.349442] NET: Registered protocol family 31 Sep 30 16:29:38 BrianLinux kernel: [ 0.349445] Bluetooth: HCI device and connection manager initialized Sep 30 16:29:38 BrianLinux kernel: [ 0.349448] Bluetooth: HCI socket layer initialized Sep 30 16:29:38 BrianLinux kernel: [ 0.349451] NetLabel: Initializing Sep 30 16:29:38 BrianLinux kernel: [ 0.349453] NetLabel: domain hash size = 128 Sep 30 16:29:38 BrianLinux kernel: [ 0.349456] NetLabel: protocols = UNLABELED CIPSOv4 Sep 30 16:29:38 BrianLinux kernel: [ 0.349472] NetLabel: unlabeled traffic allowed by default Sep 30 16:29:38 BrianLinux kernel: [ 0.349517] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 Sep 30 16:29:38 BrianLinux kernel: [ 0.349523] hpet0: 3 comparators, 64-bit 14.318180 MHz counter Sep 30 16:29:38 BrianLinux kernel: [ 0.353971] pnp: PnP ACPI init Sep 30 16:29:38 BrianLinux kernel: [ 0.353998] ACPI: bus type pnp registered Sep 30 16:29:38 BrianLinux kernel: [ 0.428586] pnp: PnP ACPI: found 10 devices Sep 30 16:29:38 BrianLinux kernel: [ 0.428590] ACPI: ACPI bus type pnp unregistered Sep 30 16:29:38 BrianLinux kernel: [ 0.428595] PnPBIOS: Disabled by ACPI PNP Sep 30 16:29:38 BrianLinux kernel: [ 0.428609] system 00:01: iomem range 0xe0000000-0xefffffff has been reserved Sep 30 16:29:38 BrianLinux kernel: [ 0.428613] system 00:01: iomem range 0xfed14000-0xfed17fff has been reserved Sep 30 16:29:38 BrianLinux kernel: [ 0.428617] system 00:01: iomem range 0xfed18000-0xfed18fff has been reserved Sep 30 16:29:38 BrianLinux kernel: [ 0.428621] system 00:01: iomem range 0xfed19000-0xfed19fff has been reserved Sep 30 16:29:38 BrianLinux kernel: [ 0.428625] system 00:01: iomem range 0xfed1c000-0xfed1ffff has been reserved Sep 30 16:29:38 BrianLinux kernel: [ 0.428629] system 00:01: iomem range 0xfed20000-0xfed3ffff has been reserved Sep 30 16:29:38 BrianLinux kernel: [ 0.428633] system 00:01: iomem range 0xfed40000-0xfed44fff has been reserved Sep 30 16:29:38 BrianLinux kernel: [ 0.428637] system 00:01: iomem range 0xfed45000-0xfed8ffff has been reserved Sep 30 16:29:38 BrianLinux kernel: [ 0.428650] system 00:04: iomem range 0xfed00000-0xfed003ff has been reserved Sep 30 16:29:38 BrianLinux kernel: [ 0.428658] system 00:06: ioport range 0x800-0x80f has been reserved Sep 30 16:29:38 BrianLinux kernel: [ 0.428662] system 00:06: ioport range 0x1000-0x107f has been reserved Sep 30 16:29:38 BrianLinux kernel: [ 0.428666] system 00:06: ioport range 0x1180-0x11bf has been reserved Sep 30 16:29:38 BrianLinux kernel: [ 0.428669] system 00:06: ioport range 0x1640-0x164f has been reserved Sep 30 16:29:38 BrianLinux kernel: [ 0.463376] AppArmor: AppArmor Filesystem Enabled Sep 30 16:29:38 BrianLinux kernel: [ 0.463435] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:01 Sep 30 16:29:38 BrianLinux kernel: [ 0.463438] pci 0000:00:1c.0: IO window: disabled Sep 30 16:29:38 BrianLinux kernel: [ 0.463445] pci 0000:00:1c.0: MEM window: disabled Sep 30 16:29:38 BrianLinux kernel: [ 0.463450] pci 0000:00:1c.0: PREFETCH window: disabled Sep 30 16:29:38 BrianLinux kernel: [ 0.463470] pci 0000:00:1c.2: PCI bridge, secondary bus 0000:06 Sep 30 16:29:38 BrianLinux kernel: [ 0.463472] pci 0000:00:1c.2: IO window: disabled Sep 30 16:29:38 BrianLinux kernel: [ 0.463480] pci 0000:00:1c.2: MEM window: 0x80000000-0x800fffff Sep 30 16:29:38 BrianLinux kernel: [ 0.463486] pci 0000:00:1c.2: PREFETCH window: disabled Sep 30 16:29:38 BrianLinux kernel: [ 0.463492] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:08 Sep 30 16:29:38 BrianLinux kernel: [ 0.463496] pci 0000:00:1e.0: IO window: 0x2000-0x2fff Sep 30 16:29:38 BrianLinux kernel: [ 0.463504] pci 0000:00:1e.0: MEM window: 0xd0100000-0xd01fffff Sep 30 16:29:38 BrianLinux kernel: [ 0.463510] pci 0000:00:1e.0: PREFETCH window: disabled Sep 30 16:29:38 BrianLinux kernel: [ 0.463526] alloc irq_desc for 17 on node -1 Sep 30 16:29:38 BrianLinux kernel: [ 0.463529] alloc kstat_irqs on node -1 Sep 30 16:29:38 BrianLinux kernel: [ 0.463536] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 Sep 30 16:29:38 BrianLinux kernel: [ 0.463546] pci 0000:00:1c.0: setting latency timer to 64 Sep 30 16:29:38 BrianLinux kernel: [ 0.463555] pci 0000:00:1c.2: enabling device (0100 -> 0102) Sep 30 16:29:38 BrianLinux kernel: [ 0.463560] alloc irq_desc for 18 on node -1 Sep 30 16:29:38 BrianLinux kernel: [ 0.463562] alloc kstat_irqs on node -1 Sep 30 16:29:38 BrianLinux kernel: [ 0.463567] pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 Sep 30 16:29:38 BrianLinux kernel: [ 0.463575] pci 0000:00:1c.2: setting latency timer to 64 Sep 30 16:29:38 BrianLinux kernel: [ 0.463584] pci 0000:00:1e.0: setting latency timer to 64 Sep 30 16:29:38 BrianLinux kernel: [ 0.463590] pci_bus 0000:00: resource 0 io: [0x00-0xffff] Sep 30 16:29:38 BrianLinux kernel: [ 0.463594] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff] Sep 30 16:29:38 BrianLinux kernel: [ 0.463598] pci_bus 0000:01: resource 0 mem: [0x0-0xfff] Sep 30 16:29:38 BrianLinux kernel: [ 0.463601] pci_bus 0000:01: resource 1 mem: [0x0-0xfffff] Sep 30 16:29:38 BrianLinux kernel: [ 0.463604] pci_bus 0000:06: resource 0 mem: [0x0-0xfff] Sep 30 16:29:38 BrianLinux kernel: [ 0.463608] pci_bus 0000:06: resource 1 mem: [0x80000000-0x800fffff] Sep 30 16:29:38 BrianLinux kernel: [ 0.463612] pci_bus 0000:08: resource 0 io: [0x2000-0x2fff] Sep 30 16:29:38 BrianLinux kernel: [ 0.463615] pci_bus 0000:08: resource 1 mem: [0xd0100000-0xd01fffff] Sep 30 16:29:38 BrianLinux kernel: [ 0.463619] pci_bus 0000:08: resource 3 io: [0x00-0xffff] Sep 30 16:29:38 BrianLinux kernel: [ 0.463622] pci_bus 0000:08: resource 4 mem: [0x000000-0xffffffff] Sep 30 16:29:38 BrianLinux kernel: [ 0.463668] NET: Registered protocol family 2 Sep 30 16:29:38 BrianLinux kernel: [ 0.463778] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) Sep 30 16:29:38 BrianLinux kernel: [ 0.464162] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) Sep 30 16:29:38 BrianLinux kernel: [ 0.465073] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) Sep 30 16:29:38 BrianLinux kernel: [ 0.465582] TCP: Hash tables configured (established 131072 bind 65536) Sep 30 16:29:38 BrianLinux kernel: [ 0.465586] TCP reno registered Sep 30 16:29:38 BrianLinux kernel: [ 0.465719] NET: Registered protocol family 1 Sep 30 16:29:38 BrianLinux kernel: [ 0.465799] Trying to unpack rootfs image as initramfs... Sep 30 16:29:38 BrianLinux kernel: [ 0.504017] Switched to high resolution mode on CPU 0 Sep 30 16:29:38 BrianLinux kernel: [ 0.689779] Freeing initrd memory: 6634k freed Sep 30 16:29:38 BrianLinux kernel: [ 0.694423] Simple Boot Flag at 0x36 set to 0x1 Sep 30 16:29:38 BrianLinux kernel: [ 0.694529] cpufreq-nforce2: No nForce2 chipset. Sep 30 16:29:38 BrianLinux kernel: [ 0.694576] Scanning for low memory corruption every 60 seconds Sep 30 16:29:38 BrianLinux kernel: [ 0.694762] audit: initializing netlink socket (disabled) Sep 30 16:29:38 BrianLinux kernel: [ 0.694785] type=2000 audit(1254328159.692:1): initialized Sep 30 16:29:38 BrianLinux kernel: [ 0.705693] highmem bounce pool size: 64 pages Sep 30 16:29:38 BrianLinux kernel: [ 0.705701] HugeTLB registered 4 MB page size, pre-allocated 0 pages Sep 30 16:29:38 BrianLinux kernel: [ 0.707462] VFS: Disk quotas dquot_6.5.2 Sep 30 16:29:38 BrianLinux kernel: [ 0.707536] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) Sep 30 16:29:38 BrianLinux kernel: [ 0.708225] fuse init (API version 7.12) Sep 30 16:29:38 BrianLinux kernel: [ 0.708327] msgmni has been set to 1706 Sep 30 16:29:38 BrianLinux kernel: [ 0.708565] alg: No test for stdrng (krng) Sep 30 16:29:38 BrianLinux kernel: [ 0.708580] io scheduler noop registered Sep 30 16:29:38 BrianLinux kernel: [ 0.708583] io scheduler anticipatory registered Sep 30 16:29:38 BrianLinux kernel: [ 0.708586] io scheduler deadline registered (default) Sep 30 16:29:38 BrianLinux kernel: [ 0.708640] io scheduler cfq registered Sep 30 16:29:38 BrianLinux kernel: [ 0.708656] pci 0000:00:02.0: Boot video device Sep 30 16:29:38 BrianLinux kernel: [ 2.308012] pci 0000:00:1d.7: EHCI: BIOS handoff failed (BIOS bug?) 01010001 Sep 30 16:29:38 BrianLinux kernel: [ 2.308284] alloc irq_desc for 24 on node -1 Sep 30 16:29:38 BrianLinux kernel: [ 2.308287] alloc kstat_irqs on node -1 Sep 30 16:29:38 BrianLinux kernel: [ 2.308303] pcieport-driver 0000:00:1c.0: irq 24 for MSI/MSI-X Sep 30 16:29:38 BrianLinux kernel: [ 2.308316] pcieport-driver 0000:00:1c.0: setting latency timer to 64 Sep 30 16:29:38 BrianLinux kernel: [ 2.308488] alloc irq_desc for 25 on node -1 Sep 30 16:29:38 BrianLinux kernel: [ 2.308491] alloc kstat_irqs on node -1 Sep 30 16:29:38 BrianLinux kernel: [ 2.308501] pcieport-driver 0000:00:1c.2: irq 25 for MSI/MSI-X Sep 30 16:29:38 BrianLinux kernel: [ 2.308513] pcieport-driver 0000:00:1c.2: setting latency timer to 64 Sep 30 16:29:38 BrianLinux kernel: [ 2.308631] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 Sep 30 16:29:38 BrianLinux kernel: [ 2.308724] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 Sep 30 16:29:38 BrianLinux kernel: [ 2.364067] ACPI: AC Adapter [ACAD] (on-line) Sep 30 16:29:38 BrianLinux kernel: [ 2.364159] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0 Sep 30 16:29:38 BrianLinux kernel: [ 2.364164] ACPI: Power Button [PWRF] Sep 30 16:29:38 BrianLinux kernel: [ 2.364224] input: Sleep Button as /devices/LNXSYSTM:00/LNXSLPBN:00/input/input1 Sep 30 16:29:38 BrianLinux kernel: [ 2.364227] ACPI: Sleep Button [SLPF] Sep 30 16:29:38 BrianLinux kernel: [ 2.364237] ACPI Error: Could not enable SleepButton event 20090521 evxfevnt-193 Sep 30 16:29:38 BrianLinux kernel: [ 2.364243] ACPI Warning: Could not enable fixed event 3 20090521 evxface-146 Sep 30 16:29:38 BrianLinux kernel: [ 2.364295] button: probe of LNXSLPBN:00 failed with error -22 Sep 30 16:29:38 BrianLinux kernel: [ 2.364344] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input2 Sep 30 16:29:38 BrianLinux kernel: [ 2.364388] ACPI: Lid Switch [LID] Sep 30 16:29:38 BrianLinux kernel: [ 2.364444] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input3 Sep 30 16:29:38 BrianLinux kernel: [ 2.364448] ACPI: Power Button [PWRB] Sep 30 16:29:38 BrianLinux kernel: [ 2.365235] Marking TSC unstable due to TSC halts in idle Sep 30 16:29:38 BrianLinux kernel: [ 2.365260] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3]) Sep 30 16:29:38 BrianLinux kernel: [ 2.365290] processor LNXCPU:00: registered as cooling_device0 Sep 30 16:29:38 BrianLinux kernel: [ 2.365294] ACPI: Processor [CPU0] (supports 8 throttling states) Sep 30 16:29:38 BrianLinux kernel: [ 2.624084] thermal LNXTHERM:01: registered as thermal_zone0 Sep 30 16:29:38 BrianLinux kernel: [ 2.624094] ACPI: Thermal Zone [TZ01] (60 C) Sep 30 16:29:38 BrianLinux kernel: [ 2.624256] thermal LNXTHERM:02: registered as thermal_zone1 Sep 30 16:29:38 BrianLinux kernel: [ 2.624266] ACPI: Thermal Zone [TZ02] (27 C) Sep 30 16:29:38 BrianLinux kernel: [ 2.624445] isapnp: Scanning for PnP cards... Sep 30 16:29:38 BrianLinux kernel: [ 2.978789] isapnp: No Plug & Play device found Sep 30 16:29:38 BrianLinux kernel: [ 3.164165] ACPI: Battery Slot [BAT1] (battery present) Sep 30 16:29:38 BrianLinux kernel: [ 3.164369] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled Sep 30 16:29:38 BrianLinux kernel: [ 3.165920] brd: module loaded Sep 30 16:29:38 BrianLinux kernel: [ 3.166468] loop: module loaded Sep 30 16:29:38 BrianLinux kernel: [ 3.166558] input: Macintosh mouse button emulation as /devices/virtual/input/input4 Sep 30 16:29:38 BrianLinux kernel: [ 3.166644] ahci 0000:00:1f.2: version 3.0 Sep 30 16:29:38 BrianLinux kernel: [ 3.166663] alloc irq_desc for 19 on node -1 Sep 30 16:29:38 BrianLinux kernel: [ 3.166666] alloc kstat_irqs on node -1 Sep 30 16:29:38 BrianLinux kernel: [ 3.166676] ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19 Sep 30 16:29:38 BrianLinux kernel: [ 3.166717] alloc irq_desc for 26 on node -1 Sep 30 16:29:38 BrianLinux kernel: [ 3.166720] alloc kstat_irqs on node -1 Sep 30 16:29:38 BrianLinux kernel: [ 3.166731] ahci 0000:00:1f.2: irq 26 for MSI/MSI-X Sep 30 16:29:38 BrianLinux kernel: [ 3.166816] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 4 ports 1.5 Gbps 0x1 impl SATA mode Sep 30 16:29:38 BrianLinux kernel: [ 3.166821] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part Sep 30 16:29:38 BrianLinux kernel: [ 3.166828] ahci 0000:00:1f.2: setting latency timer to 64 Sep 30 16:29:38 BrianLinux kernel: [ 3.166974] scsi0 : ahci Sep 30 16:29:38 BrianLinux kernel: [ 3.167092] scsi1 : ahci Sep 30 16:29:38 BrianLinux kernel: [ 3.167152] scsi2 : ahci Sep 30 16:29:38 BrianLinux kernel: [ 3.167214] scsi3 : ahci Sep 30 16:29:38 BrianLinux kernel: [ 3.167342] ata1: SATA max UDMA/133 abar m1024@0xd0544400 port 0xd0544500 irq 26 Sep 30 16:29:38 BrianLinux kernel: [ 3.167345] ata2: DUMMY Sep 30 16:29:38 BrianLinux kernel: [ 3.167347] ata3: DUMMY Sep 30 16:29:38 BrianLinux kernel: [ 3.167349] ata4: DUMMY Sep 30 16:29:38 BrianLinux kernel: [ 3.167438] ata_piix 0000:00:1f.1: version 2.13 Sep 30 16:29:38 BrianLinux kernel: [ 3.167452] ata_piix 0000:00:1f.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 Sep 30 16:29:38 BrianLinux kernel: [ 3.167493] ata_piix 0000:00:1f.1: setting latency timer to 64 Sep 30 16:29:38 BrianLinux kernel: [ 3.167599] scsi4 : ata_piix Sep 30 16:29:38 BrianLinux kernel: [ 3.167685] scsi5 : ata_piix Sep 30 16:29:38 BrianLinux kernel: [ 3.168368] ata5: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x1810 irq 14 Sep 30 16:29:38 BrianLinux kernel: [ 3.168372] ata6: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x1818 irq 15 Sep 30 16:29:38 BrianLinux kernel: [ 3.169329] Fixed MDIO Bus: probed Sep 30 16:29:38 BrianLinux kernel: [ 3.169374] PPP generic driver version 2.4.2 Sep 30 16:29:38 BrianLinux kernel: [ 3.169498] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver Sep 30 16:29:38 BrianLinux kernel: [ 3.169522] alloc irq_desc for 23 on node -1 Sep 30 16:29:38 BrianLinux kernel: [ 3.169525] alloc kstat_irqs on node -1 Sep 30 16:29:38 BrianLinux kernel: [ 3.169534] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23 Sep 30 16:29:38 BrianLinux kernel: [ 3.169550] ehci_hcd 0000:00:1d.7: setting latency timer to 64 Sep 30 16:29:38 BrianLinux kernel: [ 3.169555] ehci_hcd 0000:00:1d.7: EHCI Host Controller Sep 30 16:29:38 BrianLinux kernel: [ 3.169623] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1 Sep 30 16:29:38 BrianLinux kernel: [ 3.173543] ehci_hcd 0000:00:1d.7: debug port 1 Sep 30 16:29:38 BrianLinux kernel: [ 3.173551] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported Sep 30 16:29:38 BrianLinux kernel: [ 3.173580] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xd0544000 Sep 30 16:29:38 BrianLinux kernel: [ 3.177717] ata6: port disabled. ignoring. Sep 30 16:29:38 BrianLinux kernel: [ 3.188016] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 Sep 30 16:29:38 BrianLinux kernel: [ 3.188115] usb usb1: configuration #1 chosen from 1 choice Sep 30 16:29:38 BrianLinux kernel: [ 3.188151] hub 1-0:1.0: USB hub found Sep 30 16:29:38 BrianLinux kernel: [ 3.188161] hub 1-0:1.0: 6 ports detected Sep 30 16:29:38 BrianLinux kernel: [ 3.188237] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver Sep 30 16:29:38 BrianLinux kernel: [ 3.188258] uhci_hcd: USB Universal Host Controller Interface driver Sep 30 16:29:38 BrianLinux kernel: [ 3.188306] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 Sep 30 16:29:38 BrianLinux kernel: [ 3.188315] uhci_hcd 0000:00:1d.0: setting latency timer to 64 Sep 30 16:29:38 BrianLinux kernel: [ 3.188319] uhci_hcd 0000:00:1d.0: UHCI Host Controller Sep 30 16:29:38 BrianLinux kernel: [ 3.188359] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 Sep 30 16:29:38 BrianLinux kernel: [ 3.188390] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001820 Sep 30 16:29:38 BrianLinux kernel: [ 3.188483] usb usb2: configuration #1 chosen from 1 choice Sep 30 16:29:38 BrianLinux kernel: [ 3.188520] hub 2-0:1.0: USB hub found Sep 30 16:29:38 BrianLinux kernel: [ 3.188528] hub 2-0:1.0: 2 ports detected Sep 30 16:29:38 BrianLinux kernel: [ 3.188592] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 Sep 30 16:29:38 BrianLinux kernel: [ 3.188600] uhci_hcd 0000:00:1d.1: setting latency timer to 64 Sep 30 16:29:38 BrianLinux kernel: [ 3.188604] uhci_hcd 0000:00:1d.1: UHCI Host Controller Sep 30 16:29:38 BrianLinux kernel: [ 3.188639] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 Sep 30 16:29:38 BrianLinux kernel: [ 3.188678] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00001840 Sep 30 16:29:38 BrianLinux kernel: [ 3.188766] usb usb3: configuration #1 chosen from 1 choice Sep 30 16:29:38 BrianLinux kernel: [ 3.188796] hub 3-0:1.0: USB hub found Sep 30 16:29:38 BrianLinux kernel: [ 3.188804] hub 3-0:1.0: 2 ports detected Sep 30 16:29:38 BrianLinux kernel: [ 3.188860] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 Sep 30 16:29:38 BrianLinux kernel: [ 3.188868] uhci_hcd 0000:00:1d.2: setting latency timer to 64 Sep 30 16:29:38 BrianLinux kernel: [ 3.188872] uhci_hcd 0000:00:1d.2: UHCI Host Controller Sep 30 16:29:38 BrianLinux kernel: [ 3.188907] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 Sep 30 16:29:38 BrianLinux kernel: [ 3.188944] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001860 Sep 30 16:29:38 BrianLinux kernel: [ 3.189038] usb usb4: configuration #1 chosen from 1 choice Sep 30 16:29:38 BrianLinux kernel: [ 3.189069] hub 4-0:1.0: USB hub found Sep 30 16:29:38 BrianLinux kernel: [ 3.189077] hub 4-0:1.0: 2 ports detected Sep 30 16:29:38 BrianLinux kernel: [ 3.189191] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 Sep 30 16:29:38 BrianLinux kernel: [ 3.208970] i8042.c: Detected active multiplexing controller, rev 1.1. Sep 30 16:29:38 BrianLinux kernel: [ 3.225961] serio: i8042 KBD port at 0x60,0x64 irq 1 Sep 30 16:29:38 BrianLinux kernel: [ 3.225968] serio: i8042 AUX0 port at 0x60,0x64 irq 12 Sep 30 16:29:38 BrianLinux kernel: [ 3.225999] serio: i8042 AUX1 port at 0x60,0x64 irq 12 Sep 30 16:29:38 BrianLinux kernel: [ 3.226030] serio: i8042 AUX2 port at 0x60,0x64 irq 12 Sep 30 16:29:38 BrianLinux kernel: [ 3.226056] serio: i8042 AUX3 port at 0x60,0x64 irq 12 Sep 30 16:29:38 BrianLinux kernel: [ 3.226164] mice: PS/2 mouse device common for all mice Sep 30 16:29:38 BrianLinux kernel: [ 3.227247] rtc_cmos 00:09: RTC can wake from S4 Sep 30 16:29:38 BrianLinux kernel: [ 3.227292] rtc_cmos 00:09: rtc core: registered rtc_cmos as rtc0 Sep 30 16:29:38 BrianLinux kernel: [ 3.227327] rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs Sep 30 16:29:38 BrianLinux kernel: [ 3.227456] device-mapper: uevent: version 1.0.3 Sep 30 16:29:38 BrianLinux kernel: [ 3.227565] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com Sep 30 16:29:38 BrianLinux kernel: [ 3.227625] device-mapper: multipath: version 1.1.0 loaded Sep 30 16:29:38 BrianLinux kernel: [ 3.227629] device-mapper: multipath round-robin: version 1.0.0 loaded Sep 30 16:29:38 BrianLinux kernel: [ 3.227773] EISA: Probing bus 0 at eisa.0 Sep 30 16:29:38 BrianLinux kernel: [ 3.227782] Cannot allocate resource for EISA slot 1 Sep 30 16:29:38 BrianLinux kernel: [ 3.227785] Cannot allocate resource for EISA slot 2 Sep 30 16:29:38 BrianLinux kernel: [ 3.227812] EISA: Detected 0 cards. Sep 30 16:29:38 BrianLinux kernel: [ 3.227907] cpuidle: using governor ladder Sep 30 16:29:38 BrianLinux kernel: [ 3.227979] cpuidle: using governor menu Sep 30 16:29:38 BrianLinux kernel: [ 3.228573] TCP cubic registered Sep 30 16:29:38 BrianLinux kernel: [ 3.228768] NET: Registered protocol family 10 Sep 30 16:29:38 BrianLinux kernel: [ 3.229267] lo: Disabled Privacy Extensions Sep 30 16:29:38 BrianLinux kernel: [ 3.229619] NET: Registered protocol family 17 Sep 30 16:29:38 BrianLinux kernel: [ 3.229640] Bluetooth: L2CAP ver 2.13 Sep 30 16:29:38 BrianLinux kernel: [ 3.229642] Bluetooth: L2CAP socket layer initialized Sep 30 16:29:38 BrianLinux kernel: [ 3.229645] Bluetooth: SCO (Voice Link) ver 0.6 Sep 30 16:29:38 BrianLinux kernel: [ 3.229648] Bluetooth: SCO socket layer initialized Sep 30 16:29:38 BrianLinux kernel: [ 3.229683] Bluetooth: RFCOMM TTY layer initialized Sep 30 16:29:38 BrianLinux kernel: [ 3.229687] Bluetooth: RFCOMM socket layer initialized Sep 30 16:29:38 BrianLinux kernel: [ 3.229689] Bluetooth: RFCOMM ver 1.11 Sep 30 16:29:38 BrianLinux kernel: [ 3.229715] Using IPI No-Shortcut mode Sep 30 16:29:38 BrianLinux kernel: [ 3.229795] PM: Resume from disk failed. Sep 30 16:29:38 BrianLinux kernel: [ 3.229819] registered taskstats version 1 Sep 30 16:29:38 BrianLinux kernel: [ 3.229943] Magic number: 9:895:490 Sep 30 16:29:38 BrianLinux kernel: [ 3.230054] rtc_cmos 00:09: setting system clock to 2009-09-30 16:29:23 UTC (1254328163) Sep 30 16:29:38 BrianLinux kernel: [ 3.230058] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found Sep 30 16:29:38 BrianLinux kernel: [ 3.230060] EDD information not available. Sep 30 16:29:38 BrianLinux kernel: [ 3.242477] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input5 Sep 30 16:29:38 BrianLinux kernel: [ 3.356448] ata5.00: ATAPI: TSSTcorpCDW/DVD TS-L462D, HS00, max MWDMA2 Sep 30 16:29:38 BrianLinux kernel: [ 3.404350] ata5.00: configured for MWDMA2 Sep 30 16:29:38 BrianLinux kernel: [ 3.484067] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) Sep 30 16:29:38 BrianLinux kernel: [ 3.500042] Clocksource tsc unstable (delta = -168774507 ns) Sep 30 16:29:38 BrianLinux kernel: [ 3.548154] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 filtered out Sep 30 16:29:38 BrianLinux kernel: [ 3.593471] ata1.00: ATA-8: WDC WD3200BEVT-22ZCT0, 11.01A11, max UDMA/133 Sep 30 16:29:38 BrianLinux kernel: [ 3.593475] ata1.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32) Sep 30 16:29:38 BrianLinux kernel: [ 3.596059] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 filtered out Sep 30 16:29:38 BrianLinux kernel: [ 3.596229] ata1.00: configured for UDMA/133 Sep 30 16:29:38 BrianLinux kernel: [ 3.612178] scsi 0:0:0:0: Direct-Access ATA WDC WD3200BEVT-2 11.0 PQ: 0 ANSI: 5 Sep 30 16:29:38 BrianLinux kernel: [ 3.612348] sd 0:0:0:0: Attached scsi generic sg0 type 0 Sep 30 16:29:38 BrianLinux kernel: [ 3.612397] sd 0:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB) Sep 30 16:29:38 BrianLinux kernel: [ 3.612454] sd 0:0:0:0: [sda] Write Protect is off Sep 30 16:29:38 BrianLinux kernel: [ 3.612458] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 Sep 30 16:29:38 BrianLinux kernel: [ 3.612489] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA Sep 30 16:29:38 BrianLinux kernel: [ 3.612644] sda: sda1 sda2 sda3 < sda5 > sda4 Sep 30 16:29:38 BrianLinux kernel: [ 3.646148] scsi 4:0:0:0: CD-ROM TSSTcorp CDW/DVD TS-L462D HS00 PQ: 0 ANSI: 5 Sep 30 16:29:38 BrianLinux kernel: [ 3.670043] sd 0:0:0:0: [sda] Attached SCSI disk Sep 30 16:29:38 BrianLinux kernel: [ 3.741402] sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray Sep 30 16:29:38 BrianLinux kernel: [ 3.741407] Uniform CD-ROM driver Revision: 3.20 Sep 30 16:29:38 BrianLinux kernel: [ 3.741488] sr 4:0:0:0: Attached scsi CD-ROM sr0 Sep 30 16:29:38 BrianLinux kernel: [ 3.741543] sr 4:0:0:0: Attached scsi generic sg1 type 5 Sep 30 16:29:38 BrianLinux kernel: [ 3.741572] Freeing unused kernel memory: 540k freed Sep 30 16:29:38 BrianLinux kernel: [ 3.741911] Write protecting the kernel text: 4544k Sep 30 16:29:38 BrianLinux kernel: [ 3.741956] Write protecting the kernel read-only data: 1828k Sep 30 16:29:38 BrianLinux kernel: [ 4.064285] <6>8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004) Sep 30 16:29:38 BrianLinux kernel: [ 4.064321] 8139cp 0000:08:08.0: This (id 10ec:8139 rev 10) is not an 8139C+ compatible chip, use 8139too Sep 30 16:29:38 BrianLinux kernel: [ 4.068108] 8139too Fast Ethernet driver 0.9.28 Sep 30 16:29:38 BrianLinux kernel: [ 4.068143] 8139too 0000:08:08.0: enabling device (0105 -> 0107) Sep 30 16:29:38 BrianLinux kernel: [ 4.068153] alloc irq_desc for 16 on node -1 Sep 30 16:29:38 BrianLinux kernel: [ 4.068157] alloc kstat_irqs on node -1 Sep 30 16:29:38 BrianLinux kernel: [ 4.068166] 8139too 0000:08:08.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 Sep 30 16:29:38 BrianLinux kernel: [ 4.069579] eth0: RealTek RTL8139 at 0x2000, 00:16:d4:45:6a:b6, IRQ 16 Sep 30 16:29:38 BrianLinux kernel: [ 4.641511] PM: Starting manual resume from disk Sep 30 16:29:38 BrianLinux kernel: [ 4.641517] PM: Resume from partition 8:4 Sep 30 16:29:38 BrianLinux kernel: [ 4.641519] PM: Checking hibernation image. Sep 30 16:29:38 BrianLinux kernel: [ 4.641734] PM: Resume from disk failed. Sep 30 16:29:38 BrianLinux kernel: [ 4.674942] EXT4-fs (sda1): barriers enabled Sep 30 16:29:38 BrianLinux kernel: [ 4.691871] kjournald2 starting: pid 288, dev sda1:8, commit interval 5 seconds Sep 30 16:29:38 BrianLinux kernel: [ 4.691886] EXT4-fs (sda1): delayed allocation enabled Sep 30 16:29:38 BrianLinux kernel: [ 4.691892] EXT4-fs: file extents enabled Sep 30 16:29:38 BrianLinux kernel: [ 4.696123] EXT4-fs: mballoc enabled Sep 30 16:29:38 BrianLinux kernel: [ 4.696140] EXT4-fs (sda1): mounted filesystem with ordered data mode Sep 30 16:29:38 BrianLinux kernel: [ 5.568219] type=1505 audit(1254328165.837:2): operation="profile_load" pid=308 name=/usr/sbin/tcpdump Sep 30 16:29:38 BrianLinux kernel: [ 5.571448] type=1505 audit(1254328165.837:3): operation="profile_load" pid=309 name=/sbin/dhclient3 Sep 30 16:29:38 BrianLinux kernel: [ 5.572262] type=1505 audit(1254328165.841:4): operation="profile_load" pid=309 name=/usr/lib/NetworkManager/nm-dhcp-client.action Sep 30 16:29:38 BrianLinux kernel: [ 5.572708] type=1505 audit(1254328165.841:5): operation="profile_load" pid=309 name=/usr/lib/connman/scripts/dhclient-script Sep 30 16:29:38 BrianLinux kernel: [ 5.574954] type=1505 audit(1254328165.841:6): operation="profile_load" pid=310 name=/usr/sbin/mysqld-akonadi Sep 30 16:29:38 BrianLinux kernel: [ 5.592211] type=1505 audit(1254328165.861:7): operation="profile_load" pid=312 name=/usr/lib/cups/backend/cups-pdf Sep 30 16:29:38 BrianLinux kernel: [ 5.593172] type=1505 audit(1254328165.861:8): operation="profile_load" pid=312 name=/usr/sbin/cupsd Sep 30 16:29:38 BrianLinux kernel: [ 11.602190] udev: starting version 147 Sep 30 16:29:38 BrianLinux kernel: [ 12.139471] lp: driver loaded but no devices found Sep 30 16:29:38 BrianLinux kernel: [ 12.510375] lib80211: common routines for IEEE802.11 drivers Sep 30 16:29:38 BrianLinux kernel: [ 12.510380] lib80211_crypt: registered algorithm 'NULL' Sep 30 16:29:38 BrianLinux kernel: [ 12.514641] wl: module license 'MIXED/Proprietary' taints kernel. Sep 30 16:29:38 BrianLinux kernel: [ 12.514648] Disabling lock debugging due to kernel taint Sep 30 16:29:38 BrianLinux kernel: [ 12.520380] intel_rng: FWH not detected Sep 30 16:29:38 BrianLinux kernel: [ 12.520667] wl 0000:06:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 Sep 30 16:29:38 BrianLinux kernel: [ 12.520685] wl 0000:06:00.0: setting latency timer to 64 Sep 30 16:29:38 BrianLinux kernel: [ 12.573941] Linux agpgart interface v0.103 Sep 30 16:29:38 BrianLinux kernel: [ 12.675035] lib80211_crypt: registered algorithm 'TKIP' Sep 30 16:29:38 BrianLinux kernel: [ 12.675213] eth1: Broadcom BCM4311 802.11 Wireless Controller 5.10.91.9 Sep 30 16:29:38 BrianLinux kernel: [ 12.684614] agpgart-intel 0000:00:00.0: Intel 945GM Chipset Sep 30 16:29:38 BrianLinux kernel: [ 12.684961] agpgart-intel 0000:00:00.0: detected 7932K stolen memory Sep 30 16:29:38 BrianLinux kernel: [ 12.689743] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xc0000000 Sep 30 16:29:38 BrianLinux kernel: [ 12.720894] [drm] Initialized drm 1.1.0 20060810 Sep 30 16:29:38 BrianLinux kernel: [ 12.965600] acpi device:07: registered as cooling_device1 Sep 30 16:29:38 BrianLinux kernel: [ 12.965773] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:06/input/input6 Sep 30 16:29:38 BrianLinux kernel: [ 12.965827] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) Sep 30 16:29:38 BrianLinux kernel: [ 12.979136] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 Sep 30 16:29:38 BrianLinux kernel: [ 12.979144] i915 0000:00:02.0: setting latency timer to 64 Sep 30 16:29:38 BrianLinux kernel: [ 13.516041] [drm] TV-14: set mode NTSC 480i 0 Sep 30 16:29:38 BrianLinux kernel: [ 13.677190] [drm] fb0: inteldrmfb frame buffer device Sep 30 16:29:38 BrianLinux kernel: [ 13.677204] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0 Sep 30 16:29:38 BrianLinux kernel: [ 13.766796] [drm] LVDS-8: set mode 1280x800 17 Sep 30 16:29:38 BrianLinux kernel: [ 13.998933] Console: switching to colour frame buffer device 160x50 Sep 30 16:29:38 BrianLinux kernel: [ 14.264062] Synaptics Touchpad, model: 1, fw: 6.2, id: 0x1a0b1, caps: 0xa04713/0x200000 Sep 30 16:29:38 BrianLinux kernel: [ 14.331411] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input7 Sep 30 16:29:38 BrianLinux kernel: [ 15.398216] alloc irq_desc for 22 on node -1 Sep 30 16:29:38 BrianLinux kernel: [ 15.398221] alloc kstat_irqs on node -1 Sep 30 16:29:38 BrianLinux kernel: [ 15.398231] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 Sep 30 16:29:38 BrianLinux kernel: [ 15.398277] HDA Intel 0000:00:1b.0: setting latency timer to 64 Sep 30 16:29:38 BrianLinux kernel: [ 15.778952] ip_tables: (C) 2000-2006 Netfilter Core Team Sep 30 16:29:38 BrianLinux kernel: [ 17.289898] Adding 1558296k swap on /dev/sda4. Priority:-1 extents:1 across:1558296k Sep 30 16:29:38 BrianLinux kernel: [ 17.403955] EXT4-fs (sda1): internal journal on sda1:8 Sep 30 16:29:38 BrianLinux kernel: [ 18.135856] type=1505 audit(1254346178.401:9): operation="profile_replace" pid=686 name=/usr/sbin/tcpdump Sep 30 16:29:38 BrianLinux kernel: [ 18.138134] type=1505 audit(1254346178.405:10): operation="profile_replace" pid=687 name=/sbin/dhclient3 Sep 30 16:29:38 BrianLinux kernel: [ 18.138925] type=1505 audit(1254346178.405:11): operation="profile_replace" pid=687 name=/usr/lib/NetworkManager/nm-dhcp-client.action Sep 30 16:29:38 BrianLinux kernel: [ 18.139377] type=1505 audit(1254346178.405:12): operation="profile_replace" pid=687 name=/usr/lib/connman/scripts/dhclient-script Sep 30 16:29:38 BrianLinux kernel: [ 18.141389] type=1505 audit(1254346178.409:13): operation="profile_replace" pid=688 name=/usr/sbin/mysqld-akonadi Sep 30 16:29:39 BrianLinux NetworkManager: starting... Sep 30 16:29:39 BrianLinux NetworkManager: Trying to start the modem-manager... Sep 30 16:29:39 BrianLinux NetworkManager: SCPlugin-Ifupdown: init! Sep 30 16:29:39 BrianLinux NetworkManager: SCPlugin-Ifupdown: update_system_hostname Sep 30 16:29:39 BrianLinux NetworkManager: SCPluginIfupdown: management mode: unmanaged Sep 30 16:29:39 BrianLinux NetworkManager: SCPlugin-Ifupdown: devices added (path: /sys/devices/pci0000:00/0000:00:1c.2/0000:06:00.0/net/eth1, iface: eth1) Sep 30 16:29:39 BrianLinux NetworkManager: SCPlugin-Ifupdown: device added (path: /sys/devices/pci0000:00/0000:00:1c.2/0000:06:00.0/net/eth1, iface: eth1): no exported connection Sep 30 16:29:39 BrianLinux NetworkManager: SCPlugin-Ifupdown: devices added (path: /sys/devices/pci0000:00/0000:00:1e.0/0000:08:08.0/net/eth0, iface: eth0) Sep 30 16:29:39 BrianLinux NetworkManager: SCPlugin-Ifupdown: device added (path: /sys/devices/pci0000:00/0000:00:1e.0/0000:08:08.0/net/eth0, iface: eth0): no exported connection Sep 30 16:29:39 BrianLinux NetworkManager: SCPlugin-Ifupdown: devices added (path: /sys/devices/virtual/net/lo, iface: lo) Sep 30 16:29:39 BrianLinux NetworkManager: SCPlugin-Ifupdown: device added (path: /sys/devices/virtual/net/lo, iface: lo): no exported connection Sep 30 16:29:39 BrianLinux NetworkManager: SCPlugin-Ifupdown: end _init. Sep 30 16:29:39 BrianLinux NetworkManager: Loaded plugin ifupdown: (C) 2008 Canonical Ltd. To report bugs please use the NetworkManager mailing list. Sep 30 16:29:39 BrianLinux NetworkManager: Loaded plugin keyfile: (c) 2007 - 2008 Red Hat, Inc. To report bugs please use the NetworkManager mailing list. Sep 30 16:29:39 BrianLinux NetworkManager: Wireless now enabled by radio killswitch Sep 30 16:29:39 BrianLinux NetworkManager: SCPlugin-Ifupdown: (157633264) ... get_connections. Sep 30 16:29:39 BrianLinux NetworkManager: SCPlugin-Ifupdown: (157633264) ... get_connections (managed=false): return empty list. Sep 30 16:29:39 BrianLinux modem-manager: Loaded plugin Nokia Sep 30 16:29:39 BrianLinux modem-manager: Loaded plugin Sierra Sep 30 16:29:39 BrianLinux modem-manager: Loaded plugin ZTE Sep 30 16:29:39 BrianLinux modem-manager: Loaded plugin Novatel Sep 30 16:29:39 BrianLinux modem-manager: Loaded plugin Huawei Sep 30 16:29:39 BrianLinux modem-manager: Loaded plugin Option High-Speed Sep 30 16:29:39 BrianLinux modem-manager: Loaded plugin Ericsson MBM Sep 30 16:29:39 BrianLinux modem-manager: Loaded plugin Gobi Sep 30 16:29:39 BrianLinux modem-manager: Loaded plugin MotoC Sep 30 16:29:39 BrianLinux modem-manager: Loaded plugin Generic Sep 30 16:29:39 BrianLinux modem-manager: Loaded plugin Option Sep 30 16:29:40 BrianLinux NetworkManager: Ifupdown: get unmanaged devices count: 0 Sep 30 16:29:40 BrianLinux NetworkManager: (eth1): driver supports SSID scans (scan_capa 0x01). Sep 30 16:29:40 BrianLinux NetworkManager: (eth1): new 802.11 WiFi device (driver: 'wl') Sep 30 16:29:40 BrianLinux NetworkManager: (eth1): exported as /org/freedesktop/NetworkManager/Devices/0 Sep 30 16:29:40 BrianLinux NetworkManager: (eth1): now managed Sep 30 16:29:40 BrianLinux NetworkManager: (eth1): device state change: 1 -> 2 (reason 2) Sep 30 16:29:40 BrianLinux NetworkManager: (eth1): preparing device. Sep 30 16:29:40 BrianLinux NetworkManager: (eth1): deactivating device (reason: 2). Sep 30 16:29:40 BrianLinux NetworkManager: supplicant_interface_acquire: assertion `mgr_state == NM_SUPPLICANT_MANAGER_STATE_IDLE' failed Sep 30 16:29:40 BrianLinux NetworkManager: (eth0): new Ethernet device (driver: '8139too') Sep 30 16:29:40 BrianLinux NetworkManager: (eth0): exported as /org/freedesktop/NetworkManager/Devices/1 Sep 30 16:29:40 BrianLinux NetworkManager: (eth0): now managed Sep 30 16:29:40 BrianLinux NetworkManager: (eth0): device state change: 1 -> 2 (reason 2) Sep 30 16:29:40 BrianLinux NetworkManager: (eth0): bringing up device. Sep 30 16:29:40 BrianLinux NetworkManager: (eth0): preparing device. Sep 30 16:29:40 BrianLinux NetworkManager: (eth0): deactivating device (reason: 2). Sep 30 16:29:40 BrianLinux NetworkManager: Added default wired connection 'Auto eth0' for /sys/devices/pci0000:00/0000:00:1e.0/0000:08:08.0/net/eth0 Sep 30 16:29:40 BrianLinux NetworkManager: default_adapter_cb(): bluez error getting default adapter: The name org.bluez was not provided by any .service files Sep 30 16:29:40 BrianLinux NetworkManager: modem-manager is now available Sep 30 16:29:40 BrianLinux NetworkManager: Trying to start the supplicant... Sep 30 16:29:40 BrianLinux NetworkManager: (eth1): supplicant manager state: down -> idle Sep 30 16:29:40 BrianLinux NetworkManager: (eth1): device state change: 2 -> 3 (reason 0) Sep 30 16:29:40 BrianLinux NetworkManager: (eth1): supplicant interface state: starting -> ready Sep 30 16:29:41 BrianLinux kernel: [ 18.145691] type=1505 audit(1254346178.413:14): operation="profile_replace" pid=690 name=/usr/lib/cups/backend/cups-pdf Sep 30 16:29:41 BrianLinux kernel: [ 18.146657] type=1505 audit(1254346178.413:15): operation="profile_replace" pid=690 name=/usr/sbin/cupsd Sep 30 16:29:41 BrianLinux kernel: [ 20.059926] eth0: link down Sep 30 16:29:41 BrianLinux kernel: [ 20.060307] ADDRCONF(NETDEV_UP): eth0: link is not ready Sep 30 16:29:41 BrianLinux kernel: [ 20.115634] ppdev: user-space parallel port driver Sep 30 16:29:41 BrianLinux kernel: [ 20.339128] [drm] TV-14: set mode NTSC 480i 0 Sep 30 16:29:41 BrianLinux kernel: [ 20.514405] [drm] TV-14: set mode NTSC 480i 0 Sep 30 16:29:41 BrianLinux kernel: [ 20.886432] [drm] TV-14: set mode NTSC 480i 0 Sep 30 16:30:29 BrianLinux NetworkManager: Activation (eth1) starting connection 'ELCNet' Sep 30 16:30:29 BrianLinux NetworkManager: (eth1): device state change: 3 -> 4 (reason 0) Sep 30 16:30:29 BrianLinux NetworkManager: Activation (eth1) Stage 1 of 5 (Device Prepare) scheduled... Sep 30 16:30:29 BrianLinux NetworkManager: Activation (eth1) Stage 1 of 5 (Device Prepare) started... Sep 30 16:30:29 BrianLinux NetworkManager: Activation (eth1) Stage 2 of 5 (Device Configure) scheduled... Sep 30 16:30:29 BrianLinux NetworkManager: Activation (eth1) Stage 1 of 5 (Device Prepare) complete. Sep 30 16:30:29 BrianLinux NetworkManager: Activation (eth1) Stage 2 of 5 (Device Configure) starting... Sep 30 16:30:29 BrianLinux NetworkManager: (eth1): device state change: 4 -> 5 (reason 0) Sep 30 16:30:29 BrianLinux NetworkManager: Activation (eth1/wireless): access point 'ELCNet' has security, but secrets are required. Sep 30 16:30:29 BrianLinux NetworkManager: (eth1): device state change: 5 -> 6 (reason 0) Sep 30 16:30:29 BrianLinux NetworkManager: Activation (eth1) Stage 2 of 5 (Device Configure) complete. Sep 30 16:30:31 BrianLinux NetworkManager: (eth1): supplicant connection state: inactive -> scanning Sep 30 16:30:34 BrianLinux NetworkManager: secrets_update_setting(): Failed to update connection secrets: 1 ipv4 Sep 30 16:30:34 BrianLinux NetworkManager: secrets_update_setting(): Failed to update connection secrets: 1 802-1x Sep 30 16:30:34 BrianLinux NetworkManager: Activation (eth1) Stage 1 of 5 (Device Prepare) scheduled... Sep 30 16:30:34 BrianLinux NetworkManager: Activation (eth1) Stage 1 of 5 (Device Prepare) started... Sep 30 16:30:34 BrianLinux NetworkManager: (eth1): device state change: 6 -> 4 (reason 0) Sep 30 16:30:34 BrianLinux NetworkManager: Activation (eth1) Stage 2 of 5 (Device Configure) scheduled... Sep 30 16:30:34 BrianLinux NetworkManager: Activation (eth1) Stage 1 of 5 (Device Prepare) complete. Sep 30 16:30:34 BrianLinux NetworkManager: Activation (eth1) Stage 2 of 5 (Device Configure) starting... Sep 30 16:30:34 BrianLinux NetworkManager: (eth1): device state change: 4 -> 5 (reason 0) Sep 30 16:30:34 BrianLinux NetworkManager: Activation (eth1/wireless): connection 'ELCNet' has security, and secrets exist. No new secrets needed. Sep 30 16:30:34 BrianLinux NetworkManager: Config: added 'ssid' value 'ELCNet' Sep 30 16:30:34 BrianLinux NetworkManager: Config: added 'scan_ssid' value '1' Sep 30 16:30:34 BrianLinux NetworkManager: Config: added 'key_mgmt' value 'NONE' Sep 30 16:30:34 BrianLinux NetworkManager: Config: added 'wep_key0' value '' Sep 30 16:30:34 BrianLinux NetworkManager: Config: added 'wep_tx_keyidx' value '0' Sep 30 16:30:34 BrianLinux NetworkManager: nm_setting_802_1x_get_pkcs11_engine_path: assertion `NM_IS_SETTING_802_1X (setting)' failed Sep 30 16:30:34 BrianLinux NetworkManager: nm_setting_802_1x_get_pkcs11_module_path: assertion `NM_IS_SETTING_802_1X (setting)' failed Sep 30 16:30:34 BrianLinux NetworkManager: Activation (eth1) Stage 2 of 5 (Device Configure) complete. Sep 30 16:30:34 BrianLinux NetworkManager: Config: set interface ap_scan to 1 Sep 30 16:30:34 BrianLinux NetworkManager: (eth1): supplicant connection state: scanning -> disconnected Sep 30 16:30:34 BrianLinux NetworkManager: (eth1): supplicant connection state: disconnected -> scanning Sep 30 16:30:39 BrianLinux NetworkManager: (eth1): supplicant connection state: scanning -> associating Sep 30 16:30:39 BrianLinux NetworkManager: (eth1): supplicant connection state: associating -> associated Sep 30 16:30:39 BrianLinux NetworkManager: (eth1): supplicant connection state: associated -> completed Sep 30 16:30:39 BrianLinux NetworkManager: Activation (eth1/wireless) Stage 2 of 5 (Device Configure) successful. Connected to wireless network 'ELCNet'. Sep 30 16:30:39 BrianLinux NetworkManager: Activation (eth1) Stage 3 of 5 (IP Configure Start) scheduled. Sep 30 16:30:39 BrianLinux NetworkManager: Activation (eth1) Stage 3 of 5 (IP Configure Start) started... Sep 30 16:30:39 BrianLinux NetworkManager: (eth1): device state change: 5 -> 7 (reason 0) Sep 30 16:30:39 BrianLinux NetworkManager: Activation (eth1) Beginning DHCP transaction (timeout in 45 seconds) Sep 30 16:30:39 BrianLinux NetworkManager: dhclient started with pid 1459 Sep 30 16:30:39 BrianLinux NetworkManager: Activation (eth1) Stage 4 of 5 (IP6 Configure Get) scheduled... Sep 30 16:30:39 BrianLinux NetworkManager: Activation (eth1) Stage 3 of 5 (IP Configure Start) complete. Sep 30 16:30:39 BrianLinux NetworkManager: Activation (eth1) Stage 4 of 5 (IP6 Configure Get) started... Sep 30 16:30:39 BrianLinux NetworkManager: Activation (eth1) Stage 4 of 5 (IP6 Configure Get) complete. Sep 30 16:30:39 BrianLinux dhclient: Internet Systems Consortium DHCP Client V3.1.2 Sep 30 16:30:39 BrianLinux dhclient: Copyright 2004-2008 Internet Systems Consortium. Sep 30 16:30:39 BrianLinux dhclient: All rights reserved. Sep 30 16:30:39 BrianLinux dhclient: For info, please visit http://www.isc.org/sw/dhcp/ Sep 30 16:30:39 BrianLinux dhclient: Sep 30 16:30:39 BrianLinux NetworkManager: DHCP: device eth1 state changed (null) -> preinit Sep 30 16:30:39 BrianLinux dhclient: Listening on LPF/eth1/00:14:a5:f0:81:57 Sep 30 16:30:39 BrianLinux dhclient: Sending on LPF/eth1/00:14:a5:f0:81:57 Sep 30 16:30:39 BrianLinux dhclient: Sending on Socket/fallback Sep 30 16:30:42 BrianLinux dhclient: DHCPREQUEST of 192.168.2.193 on eth1 to 255.255.255.255 port 67 Sep 30 16:30:49 BrianLinux dhclient: DHCPREQUEST of 192.168.2.193 on eth1 to 255.255.255.255 port 67 Sep 30 16:30:49 BrianLinux dhclient: DHCPACK of 192.168.2.193 from 192.168.2.1 Sep 30 16:30:49 BrianLinux NetworkManager: DHCP: device eth1 state changed preinit -> reboot Sep 30 16:30:49 BrianLinux NetworkManager: Activation (eth1) Stage 4 of 5 (IP4 Configure Get) scheduled... Sep 30 16:30:49 BrianLinux NetworkManager: Activation (eth1) Stage 4 of 5 (IP4 Configure Get) started... Sep 30 16:30:49 BrianLinux NetworkManager: address 192.168.2.193 Sep 30 16:30:49 BrianLinux NetworkManager: prefix 24 (255.255.255.0) Sep 30 16:30:49 BrianLinux NetworkManager: gateway 192.168.2.1 Sep 30 16:30:49 BrianLinux NetworkManager: nameserver '192.168.2.1' Sep 30 16:30:49 BrianLinux NetworkManager: Activation (eth1) Stage 5 of 5 (IP Configure Commit) scheduled... Sep 30 16:30:49 BrianLinux NetworkManager: Activation (eth1) Stage 4 of 5 (IP4 Configure Get) complete. Sep 30 16:30:49 BrianLinux NetworkManager: Activation (eth1) Stage 5 of 5 (IP Configure Commit) started... Sep 30 16:30:49 BrianLinux dhclient: bound to 192.168.2.193 -- renewal in 38973 seconds. Sep 30 16:30:50 BrianLinux NetworkManager: (eth1): device state change: 7 -> 8 (reason 0) Sep 30 16:30:50 BrianLinux NetworkManager: [1254346250.032114] periodic_update(): Roamed from BSSID 00:1B:11:EF:F7:26 (ELCNet) to (none) ((none)) Sep 30 16:30:50 BrianLinux NetworkManager: Policy set 'ELCNet' (eth1) as default for routing and DNS. Sep 30 16:30:50 BrianLinux NetworkManager: Activation (eth1) successful, device activated. Sep 30 16:30:50 BrianLinux NetworkManager: Activation (eth1) Stage 5 of 5 (IP Configure Commit) complete.