Error: command ['sh', '-c', 'dmesg | comm -13 /var/log/dmesg -'] failed with exit code 1: comm: file 1 is not in sorted order [ 0.000000] Linux version 2.6.31-10-generic (buildd@yellow) (gcc version 4.4.1 (Ubuntu 4.4.1-4ubuntu1) ) #34-Ubuntu SMP Wed Sep 16 01:09:15 UTC 2009 (Ubuntu 2.6.31-10.34-generic) comm: file 2 is not in sorted order [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-2.6.31-10-generic root=UUID=56017c0c-8e0c-4de7-b6fd-48dacfe6d30b ro vga=791 #GRUB_DISABLE_LINUX_UUID=true quiet nosplash ht=on nmi_watchdog=0 [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Centaur CentaurHauls [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009d800 (usable) [ 0.000000] BIOS-e820: 000000000009d800 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000d2000 - 00000000000d4000 (reserved) [ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000007d6b0000 (usable) [ 0.000000] BIOS-e820: 000000007d6b0000 - 000000007d6cc000 (ACPI data) [ 0.000000] BIOS-e820: 000000007d6cc000 - 000000007d700000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000007d700000 - 000000007e000000 (reserved) [ 0.000000] BIOS-e820: 00000000f0000000 - 00000000f4000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) [ 0.000000] BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved) [ 0.000000] BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved) [ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved) [ 0.000000] DMI present. [ 0.000000] last_pfn = 0x7d6b0 max_arch_pfn = 0x400000000 [ 0.000000] RAMDISK: 37925000 - 37fefbee [ 0.000000] ACPI: RSDP 00000000000f68c0 00024 (v02 LENOVO) [ 0.000000] ACPI: XSDT 000000007d6bb62b 00094 (v01 LENOVO TP-7L 00002260 LTP 00000000) [ 0.000000] ACPI: FACP 000000007d6bb700 000F4 (v03 LENOVO TP-7L 00002260 LNVO 00000001) [ 0.000000] ACPI Warning: 32/64X length mismatch in Gpe1Block: 0/32 20090521 tbfadt-527 [ 0.000000] ACPI Warning: Optional field Gpe1Block has zero address or length: 000000000000102C/0 20090521 tbfadt-558 [ 0.000000] ACPI: DSDT 000000007d6bbb1d 10025 (v01 LENOVO TP-7L 00002260 MSFT 03000000) [ 0.000000] ACPI: FACS 000000007d6e4000 00040 [ 0.000000] ACPI: SSDT 000000007d6bb8b4 00269 (v01 LENOVO TP-7L 00002260 MSFT 03000000) [ 0.000000] ACPI: ECDT 000000007d6cbb42 00052 (v01 LENOVO TP-7L 00002260 LNVO 00000001) [ 0.000000] ACPI: TCPA 000000007d6cbb94 00032 (v02 LENOVO TP-7L 00002260 LNVO 00000001) [ 0.000000] ACPI: APIC 000000007d6cbbc6 00068 (v01 LENOVO TP-7L 00002260 LNVO 00000001) [ 0.000000] ACPI: MCFG 000000007d6cbc2e 0003C (v01 LENOVO TP-7L 00002260 LNVO 00000001) [ 0.000000] ACPI: HPET 000000007d6cbc6a 00038 (v01 LENOVO TP-7L 00002260 LNVO 00000001) [ 0.000000] ACPI: SLIC 000000007d6cbdf0 00176 (v01 LENOVO TP-7L 00002260 LTP 00000000) [ 0.000000] ACPI: BOOT 000000007d6cbf66 00028 (v01 LENOVO TP-7L 00002260 LTP 00000001) [ 0.000000] ACPI: ASF! 000000007d6cbf8e 00072 (v16 LENOVO TP-7L 00002260 PTL 00000001) [ 0.000000] ACPI: SSDT 000000007d6e26d9 0025F (v01 LENOVO TP-7L 00002260 INTL 20050513) [ 0.000000] ACPI: SSDT 000000007d6e2938 000A6 (v01 LENOVO TP-7L 00002260 INTL 20050513) [ 0.000000] ACPI: SSDT 000000007d6e29de 004F7 (v01 LENOVO TP-7L 00002260 INTL 20050513) [ 0.000000] ACPI: SSDT 000000007d6e2ed5 001D8 (v01 LENOVO TP-7L 00002260 INTL 20050513) [ 0.000000] ACPI: DMI detected: Lenovo ThinkPad T61 [ 0.000000] ACPI: Added _OSI(Linux) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at 0000000000000000-000000007d6b0000 [ 0.000000] Bootmem setup node 0 0000000000000000-000000007d6b0000 [ 0.000000] NODE_DATA [000000000000a000 - 000000000000efff] [ 0.000000] bootmap [000000000000f000 - 000000000001ead7] pages 10 [ 0.000000] (7 early reservations) ==> bootmem [0000000000 - 007d6b0000] [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] [ 0.000000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000] [ 0.000000] #2 [0001000000 - 00019babcc] TEXT DATA BSS ==> [0001000000 - 00019babcc] [ 0.000000] #3 [0037925000 - 0037fefbee] RAMDISK ==> [0037925000 - 0037fefbee] [ 0.000000] #4 [000009d800 - 0000100000] BIOS reserved ==> [000009d800 - 0000100000] [ 0.000000] #5 [00019bb000 - 00019bb194] BRK ==> [00019bb000 - 00019bb194] [ 0.000000] #6 [0000008000 - 000000a000] PGTABLE ==> [0000008000 - 000000a000] [ 0.000000] found SMP MP-table at [ffff8800000f68f0] f68f0 [ 0.000000] [ffffea0000000000-ffffea0001bfffff] PMD -> [ffff880001e00000-ffff8800039fffff] on node 0 [ 0.000000] Memory: 2008436k/2054848k available (5289k kernel code, 416k absent, 45996k reserved, 2998k data, 664k init) [ 0.000000] Detected 1994.879 MHz processor. [ 0.000030] console [tty0] enabled [ 0.004000] Calibrating delay loop (skipped), value calculated using timer frequency.. 3989.75 BogoMIPS (lpj=7979516) [ 0.028065] Setting APIC routing to flat [ 0.028451] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.069266] CPU0: Intel(R) Core(TM)2 Duo CPU T7300 @ 2.00GHz stepping 0b [ 0.004000] Calibrating delay using timer specific routine.. 3989.97 BogoMIPS (lpj=7979954) [ 0.156664] CPU1: Intel(R) Core(TM)2 Duo CPU T7300 @ 2.00GHz stepping 0b [ 0.156675] checking TSC synchronization [CPU#0 -> CPU#1]: [ 0.160001] Measured 326750 cycles TSC warp between CPUs, turning off TSC clock. [ 0.160001] Marking TSC unstable due to check_tsc_sync_source failed [ 0.160029] Total of 2 processors activated (7979.73 BogoMIPS). [ 0.160092] groups: 0 1 [ 0.160102] groups: 1 0 [ 0.160178] Time: 16:34:29 Date: 09/25/09 [ 0.160178] NET: Registered protocol family 16 [ 0.160178] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 0.160178] ACPI: bus type pci registered [ 0.160178] PCI: MCFG configuration 0: base f0000000 segment 0 buses 0 - 63 [ 0.160178] PCI: MCFG area at f0000000 reserved in E820 [ 0.160688] PCI: Using MMCONFIG at f0000000 - f3ffffff [ 0.160690] PCI: Using configuration type 1 for base access [ 0.164037] bio: create slab at 0 [ 0.168297] ACPI: EC: EC description table is found, configuring boot EC [ 0.175760] ACPI: BIOS _OSI(Linux) query honored via DMI [ 0.176349] ACPI: EC: non-query interrupt received, switching to interrupt mode [ 0.198191] ACPI: Interpreter enabled [ 0.198195] ACPI: (supports S0 S3 S4 S5) [ 0.198218] ACPI: Using IOAPIC for interrupt routing [ 0.216171] ACPI: EC: GPE = 0x12, I/O: command/status = 0x66, data = 0x62 [ 0.216174] ACPI: EC: driver started in interrupt mode [ 0.216191] ACPI: Power Resource [PUBS] (on) [ 0.217911] ACPI: ACPI Dock Station Driver: 3 docks/bays found [ 0.217911] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 0.220508] pci 0000:00:02.0: reg 10 64bit mmio: [0xf8100000-0xf81fffff] [ 0.220508] pci 0000:00:02.0: reg 18 64bit mmio: [0xe0000000-0xefffffff] [ 0.220508] pci 0000:00:02.0: reg 20 io port: [0x1800-0x1807] [ 0.220508] pci 0000:00:02.1: reg 10 64bit mmio: [0xf8200000-0xf82fffff] [ 0.220508] pci 0000:00:19.0: reg 10 32bit mmio: [0xfe000000-0xfe01ffff] [ 0.220508] pci 0000:00:19.0: reg 14 32bit mmio: [0xfe025000-0xfe025fff] [ 0.220508] pci 0000:00:19.0: reg 18 io port: [0x1840-0x185f] [ 0.220508] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold [ 0.220508] pci 0000:00:19.0: PME# disabled [ 0.220508] pci 0000:00:1a.0: reg 20 io port: [0x1860-0x187f] [ 0.220574] pci 0000:00:1a.1: reg 20 io port: [0x1880-0x189f] [ 0.220722] pci 0000:00:1a.7: reg 10 32bit mmio: [0xfe226c00-0xfe226fff] [ 0.220857] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold [ 0.220867] pci 0000:00:1a.7: PME# disabled [ 0.220985] pci 0000:00:1b.0: reg 10 64bit mmio: [0xfe020000-0xfe023fff] [ 0.221125] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.221135] pci 0000:00:1b.0: PME# disabled [ 0.221324] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.221334] pci 0000:00:1c.0: PME# disabled [ 0.221536] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold [ 0.221544] pci 0000:00:1c.1: PME# disabled [ 0.221760] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold [ 0.221769] pci 0000:00:1c.2: PME# disabled [ 0.221969] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold [ 0.221976] pci 0000:00:1c.3: PME# disabled [ 0.222166] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold [ 0.222175] pci 0000:00:1c.4: PME# disabled [ 0.222327] pci 0000:00:1d.0: reg 20 io port: [0x18a0-0x18bf] [ 0.222476] pci 0000:00:1d.1: reg 20 io port: [0x18c0-0x18df] [ 0.222623] pci 0000:00:1d.2: reg 20 io port: [0x18e0-0x18ff] [ 0.222789] pci 0000:00:1d.7: reg 10 32bit mmio: [0xfe227000-0xfe2273ff] [ 0.222933] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold [ 0.222942] pci 0000:00:1d.7: PME# disabled [ 0.223266] pci 0000:00:1f.0: quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO [ 0.223273] pci 0000:00:1f.0: quirk: region 1180-11bf claimed by ICH6 GPIO [ 0.223280] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 1600 (mask 007f) [ 0.223286] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 15e0 (mask 000f) [ 0.223292] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 1680 (mask 001f) [ 0.223397] pci 0000:00:1f.1: reg 10 io port: [0x00-0x07] [ 0.223412] pci 0000:00:1f.1: reg 14 io port: [0x00-0x03] [ 0.223427] pci 0000:00:1f.1: reg 18 io port: [0x00-0x07] [ 0.223442] pci 0000:00:1f.1: reg 1c io port: [0x00-0x03] [ 0.223454] pci 0000:00:1f.1: reg 20 io port: [0x1c00-0x1c0f] [ 0.223619] pci 0000:00:1f.2: reg 10 io port: [0x1c50-0x1c57] [ 0.223636] pci 0000:00:1f.2: reg 14 io port: [0x1c44-0x1c47] [ 0.223648] pci 0000:00:1f.2: reg 18 io port: [0x1c48-0x1c4f] [ 0.223665] pci 0000:00:1f.2: reg 1c io port: [0x1c40-0x1c43] [ 0.223675] pci 0000:00:1f.2: reg 20 io port: [0x1c20-0x1c3f] [ 0.223687] pci 0000:00:1f.2: reg 24 32bit mmio: [0xfe226000-0xfe2267ff] [ 0.223780] pci 0000:00:1f.2: PME# supported from D3hot [ 0.223789] pci 0000:00:1f.2: PME# disabled [ 0.223868] pci 0000:00:1f.3: reg 10 32bit mmio: [0xfe227400-0xfe2274ff] [ 0.223921] pci 0000:00:1f.3: reg 20 io port: [0x1c60-0x1c7f] [ 0.224118] pci 0000:00:1c.0: bridge io port: [0x2000-0x2fff] [ 0.224127] pci 0000:00:1c.0: bridge 32bit mmio: [0xfc000000-0xfdffffff] [ 0.224145] pci 0000:00:1c.0: bridge 64bit mmio pref: [0xf8000000-0xf80fffff] [ 0.224282] pci 0000:03:00.0: reg 10 64bit mmio: [0xdf3fe000-0xdf3fffff] [ 0.224447] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold [ 0.224460] pci 0000:03:00.0: PME# disabled [ 0.224618] pci 0000:00:1c.1: bridge io port: [0x3000-0x3fff] [ 0.224627] pci 0000:00:1c.1: bridge 32bit mmio: [0xdc000000-0xdf3fffff] [ 0.224644] pci 0000:00:1c.1: bridge 64bit mmio pref: [0xdfe00000-0xdfefffff] [ 0.224789] pci 0000:00:1c.2: bridge io port: [0x4000-0x4fff] [ 0.224796] pci 0000:00:1c.2: bridge 32bit mmio: [0xd8000000-0xd9ffffff] [ 0.224811] pci 0000:00:1c.2: bridge 64bit mmio pref: [0xdfb00000-0xdfbfffff] [ 0.224958] pci 0000:00:1c.3: bridge io port: [0x5000-0x5fff] [ 0.224968] pci 0000:00:1c.3: bridge 32bit mmio: [0xd4000000-0xd5ffffff] [ 0.224983] pci 0000:00:1c.3: bridge 64bit mmio pref: [0xdf800000-0xdf8fffff] [ 0.225129] pci 0000:00:1c.4: bridge io port: [0x6000-0x6fff] [ 0.225138] pci 0000:00:1c.4: bridge 32bit mmio: [0xd0000000-0xd1ffffff] [ 0.225153] pci 0000:00:1c.4: bridge 64bit mmio pref: [0xdf500000-0xdf5fffff] [ 0.225247] pci 0000:15:00.0: reg 10 32bit mmio: [0xf8300000-0xf8300fff] [ 0.225296] pci 0000:15:00.0: supports D1 D2 [ 0.225298] pci 0000:15:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.225306] pci 0000:15:00.0: PME# disabled [ 0.225469] pci 0000:00:1e.0: transparent bridge [ 0.225478] pci 0000:00:1e.0: bridge io port: [0x7000-0xafff] [ 0.225488] pci 0000:00:1e.0: bridge 32bit mmio: [0xf8300000-0xfbffffff] [ 0.225505] pci 0000:00:1e.0: bridge 64bit mmio pref: [0xf4000000-0xf7ffffff] [ 0.225643] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.225809] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP0._PRT] [ 0.225881] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP1._PRT] [ 0.225951] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP2._PRT] [ 0.226020] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP3._PRT] [ 0.226098] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP4._PRT] [ 0.226176] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT] [ 0.232248] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 *10 11) [ 0.232361] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11) [ 0.232567] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11) [ 0.232771] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11) [ 0.232976] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11) [ 0.233180] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 *11) [ 0.233384] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 *11) [ 0.233588] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 *11) [ 0.233684] SCSI subsystem initialized [ 0.233684] libata version 3.00 loaded. [ 0.233684] usbcore: registered new interface driver usbfs [ 0.233684] usbcore: registered new interface driver hub [ 0.233684] usbcore: registered new device driver usb [ 0.236055] ACPI: WMI: Mapper loaded [ 0.236055] PCI: Using ACPI for IRQ routing [ 0.248013] Bluetooth: Core ver 2.15 [ 0.248108] NET: Registered protocol family 31 [ 0.248108] Bluetooth: HCI device and connection manager initialized [ 0.248108] Bluetooth: HCI socket layer initialized [ 0.248108] NetLabel: Initializing [ 0.248108] NetLabel: domain hash size = 128 [ 0.248108] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.248108] NetLabel: unlabeled traffic allowed by default [ 0.248108] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 0.248108] hpet0: 3 comparators, 64-bit 14.318180 MHz counter [ 0.256014] Switched to high resolution mode on CPU 0 [ 0.256705] Switched to high resolution mode on CPU 1 [ 0.269013] pnp: PnP ACPI init [ 0.269024] ACPI: bus type pnp registered [ 0.274259] pnp: PnP ACPI: found 11 devices [ 0.274262] ACPI: ACPI bus type pnp unregistered [ 0.274272] system 00:00: iomem range 0x0-0x9ffff could not be reserved [ 0.274276] system 00:00: iomem range 0xc0000-0xc3fff has been reserved [ 0.274279] system 00:00: iomem range 0xc4000-0xc7fff has been reserved [ 0.274282] system 00:00: iomem range 0xc8000-0xcbfff has been reserved [ 0.274284] system 00:00: iomem range 0xcc000-0xcffff has been reserved [ 0.274287] system 00:00: iomem range 0xd0000-0xd3fff could not be reserved [ 0.274291] system 00:00: iomem range 0xe0000-0xe3fff could not be reserved [ 0.274294] system 00:00: iomem range 0xe4000-0xe7fff could not be reserved [ 0.274296] system 00:00: iomem range 0xe8000-0xebfff could not be reserved [ 0.274299] system 00:00: iomem range 0xec000-0xeffff could not be reserved [ 0.274302] system 00:00: iomem range 0xf0000-0xfffff could not be reserved [ 0.274305] system 00:00: iomem range 0x100000-0x7dffffff could not be reserved [ 0.274309] system 00:00: iomem range 0xfec00000-0xfed3ffff could not be reserved [ 0.274312] system 00:00: iomem range 0xfed4c000-0xffffffff could not be reserved [ 0.274319] system 00:02: ioport range 0x164e-0x164f has been reserved [ 0.274322] system 00:02: ioport range 0x1000-0x107f has been reserved [ 0.274325] system 00:02: ioport range 0x1180-0x11bf has been reserved [ 0.274328] system 00:02: ioport range 0x800-0x80f has been reserved [ 0.274331] system 00:02: ioport range 0x15e0-0x15ef has been reserved [ 0.274334] system 00:02: ioport range 0x1600-0x165f could not be reserved [ 0.274338] system 00:02: iomem range 0xf0000000-0xf3ffffff has been reserved [ 0.274341] system 00:02: iomem range 0xfed1c000-0xfed1ffff has been reserved [ 0.274344] system 00:02: iomem range 0xfed14000-0xfed17fff has been reserved [ 0.274347] system 00:02: iomem range 0xfed18000-0xfed18fff has been reserved [ 0.274350] system 00:02: iomem range 0xfed19000-0xfed19fff has been reserved [ 0.274353] system 00:02: iomem range 0xfed45000-0xfed4bfff has been reserved [ 0.278861] AppArmor: AppArmor Filesystem Enabled [ 0.279009] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:02 [ 0.279016] pci 0000:00:1c.0: IO window: 0x2000-0x2fff [ 0.279029] pci 0000:00:1c.0: MEM window: 0xfc000000-0xfdffffff [ 0.279037] pci 0000:00:1c.0: PREFETCH window: 0x000000f8000000-0x000000f80fffff [ 0.279054] pci 0000:00:1c.1: PCI bridge, secondary bus 0000:03 [ 0.279060] pci 0000:00:1c.1: IO window: 0x3000-0x3fff [ 0.279073] pci 0000:00:1c.1: MEM window: 0xdc000000-0xdf3fffff [ 0.279080] pci 0000:00:1c.1: PREFETCH window: 0x000000dfe00000-0x000000dfefffff [ 0.279095] pci 0000:00:1c.2: PCI bridge, secondary bus 0000:04 [ 0.279101] pci 0000:00:1c.2: IO window: 0x4000-0x4fff [ 0.279111] pci 0000:00:1c.2: MEM window: 0xd8000000-0xd9ffffff [ 0.279120] pci 0000:00:1c.2: PREFETCH window: 0x000000dfb00000-0x000000dfbfffff [ 0.279135] pci 0000:00:1c.3: PCI bridge, secondary bus 0000:05 [ 0.279141] pci 0000:00:1c.3: IO window: 0x5000-0x5fff [ 0.279149] pci 0000:00:1c.3: MEM window: 0xd4000000-0xd5ffffff [ 0.279158] pci 0000:00:1c.3: PREFETCH window: 0x000000df800000-0x000000df8fffff [ 0.279175] pci 0000:00:1c.4: PCI bridge, secondary bus 0000:0d [ 0.279181] pci 0000:00:1c.4: IO window: 0x6000-0x6fff [ 0.279192] pci 0000:00:1c.4: MEM window: 0xd0000000-0xd1ffffff [ 0.279201] pci 0000:00:1c.4: PREFETCH window: 0x000000df500000-0x000000df5fffff [ 0.279221] pci 0000:15:00.0: CardBus bridge, secondary bus 0000:16 [ 0.279224] pci 0000:15:00.0: IO window: 0x007000-0x0070ff [ 0.279232] pci 0000:15:00.0: IO window: 0x007400-0x0074ff [ 0.279241] pci 0000:15:00.0: PREFETCH window: 0xf4000000-0xf7ffffff [ 0.279251] pci 0000:15:00.0: MEM window: 0x80000000-0x83ffffff [ 0.279261] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:15 [ 0.279267] pci 0000:00:1e.0: IO window: 0x7000-0xafff [ 0.279280] pci 0000:00:1e.0: MEM window: 0xf8300000-0xfbffffff [ 0.279287] pci 0000:00:1e.0: PREFETCH window: 0x000000f4000000-0x000000f7ffffff [ 0.279317] alloc irq_desc for 20 on node 0 [ 0.279319] alloc kstat_irqs on node 0 [ 0.279324] pci 0000:00:1c.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 [ 0.279332] pci 0000:00:1c.0: setting latency timer to 64 [ 0.279349] alloc irq_desc for 21 on node 0 [ 0.279351] alloc kstat_irqs on node 0 [ 0.279355] pci 0000:00:1c.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 [ 0.279359] pci 0000:00:1c.1: setting latency timer to 64 [ 0.279374] alloc irq_desc for 22 on node 0 [ 0.279376] alloc kstat_irqs on node 0 [ 0.279379] pci 0000:00:1c.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22 [ 0.279387] pci 0000:00:1c.2: setting latency timer to 64 [ 0.279404] alloc irq_desc for 23 on node 0 [ 0.279406] alloc kstat_irqs on node 0 [ 0.279409] pci 0000:00:1c.3: PCI INT D -> GSI 23 (level, low) -> IRQ 23 [ 0.279414] pci 0000:00:1c.3: setting latency timer to 64 [ 0.279429] pci 0000:00:1c.4: PCI INT A -> GSI 20 (level, low) -> IRQ 20 [ 0.279438] pci 0000:00:1c.4: setting latency timer to 64 [ 0.279448] pci 0000:00:1e.0: enabling device (0005 -> 0007) [ 0.279462] pci 0000:00:1e.0: setting latency timer to 64 [ 0.279480] alloc irq_desc for 16 on node 0 [ 0.279482] alloc kstat_irqs on node 0 [ 0.279485] pci 0000:15:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.279495] pci_bus 0000:00: resource 0 io: [0x00-0xffff] [ 0.279497] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff] [ 0.279500] pci_bus 0000:02: resource 0 io: [0x2000-0x2fff] [ 0.279502] pci_bus 0000:02: resource 1 mem: [0xfc000000-0xfdffffff] [ 0.279505] pci_bus 0000:02: resource 2 pref mem [0xf8000000-0xf80fffff] [ 0.279507] pci_bus 0000:03: resource 0 io: [0x3000-0x3fff] [ 0.279509] pci_bus 0000:03: resource 1 mem: [0xdc000000-0xdf3fffff] [ 0.279512] pci_bus 0000:03: resource 2 pref mem [0xdfe00000-0xdfefffff] [ 0.279514] pci_bus 0000:04: resource 0 io: [0x4000-0x4fff] [ 0.279516] pci_bus 0000:04: resource 1 mem: [0xd8000000-0xd9ffffff] [ 0.279519] pci_bus 0000:04: resource 2 pref mem [0xdfb00000-0xdfbfffff] [ 0.279521] pci_bus 0000:05: resource 0 io: [0x5000-0x5fff] [ 0.279524] pci_bus 0000:05: resource 1 mem: [0xd4000000-0xd5ffffff] [ 0.279526] pci_bus 0000:05: resource 2 pref mem [0xdf800000-0xdf8fffff] [ 0.279528] pci_bus 0000:0d: resource 0 io: [0x6000-0x6fff] [ 0.279531] pci_bus 0000:0d: resource 1 mem: [0xd0000000-0xd1ffffff] [ 0.279533] pci_bus 0000:0d: resource 2 pref mem [0xdf500000-0xdf5fffff] [ 0.279536] pci_bus 0000:15: resource 0 io: [0x7000-0xafff] [ 0.279538] pci_bus 0000:15: resource 1 mem: [0xf8300000-0xfbffffff] [ 0.279540] pci_bus 0000:15: resource 2 pref mem [0xf4000000-0xf7ffffff] [ 0.279542] pci_bus 0000:15: resource 3 io: [0x00-0xffff] [ 0.279545] pci_bus 0000:15: resource 4 mem: [0x000000-0xffffffffffffffff] [ 0.279547] pci_bus 0000:16: resource 0 io: [0x7000-0x70ff] [ 0.279550] pci_bus 0000:16: resource 1 io: [0x7400-0x74ff] [ 0.279552] pci_bus 0000:16: resource 2 pref mem [0xf4000000-0xf7ffffff] [ 0.279554] pci_bus 0000:16: resource 3 mem: [0x80000000-0x83ffffff] [ 0.279585] NET: Registered protocol family 2 [ 0.279719] IP route cache hash table entries: 65536 (order: 7, 524288 bytes) [ 0.280466] TCP established hash table entries: 262144 (order: 10, 4194304 bytes) [ 0.282372] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.282969] TCP: Hash tables configured (established 262144 bind 65536) [ 0.282972] TCP reno registered [ 0.283084] NET: Registered protocol family 1 [ 0.283148] Trying to unpack rootfs image as initramfs... [ 0.447747] Freeing initrd memory: 6954k freed [ 0.451666] Simple Boot Flag at 0x35 set to 0x1 [ 0.452277] Scanning for low memory corruption every 60 seconds [ 0.452617] audit: initializing netlink socket (disabled) [ 0.452634] type=2000 audit(1253896468.452:1): initialized [ 0.462607] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.465886] VFS: Disk quotas dquot_6.5.2 [ 0.465981] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.467149] fuse init (API version 7.12) [ 0.467336] msgmni has been set to 3936 [ 0.467618] alg: No test for stdrng (krng) [ 0.467630] io scheduler noop registered [ 0.467633] io scheduler anticipatory registered [ 0.467635] io scheduler deadline registered [ 0.467713] io scheduler cfq registered (default) [ 0.467727] pci 0000:00:02.0: Boot video device [ 0.468309] alloc irq_desc for 24 on node 0 [ 0.468311] alloc kstat_irqs on node 0 [ 0.468332] pcieport-driver 0000:00:1c.0: irq 24 for MSI/MSI-X [ 0.468353] pcieport-driver 0000:00:1c.0: setting latency timer to 64 [ 0.468816] alloc irq_desc for 25 on node 0 [ 0.468818] alloc kstat_irqs on node 0 [ 0.468834] pcieport-driver 0000:00:1c.1: irq 25 for MSI/MSI-X [ 0.468858] pcieport-driver 0000:00:1c.1: setting latency timer to 64 [ 0.469478] alloc irq_desc for 26 on node 0 [ 0.469480] alloc kstat_irqs on node 0 [ 0.469498] pcieport-driver 0000:00:1c.2: irq 26 for MSI/MSI-X [ 0.469518] pcieport-driver 0000:00:1c.2: setting latency timer to 64 [ 0.470000] alloc irq_desc for 27 on node 0 [ 0.470002] alloc kstat_irqs on node 0 [ 0.470018] pcieport-driver 0000:00:1c.3: irq 27 for MSI/MSI-X [ 0.470043] pcieport-driver 0000:00:1c.3: setting latency timer to 64 [ 0.470516] alloc irq_desc for 28 on node 0 [ 0.470518] alloc kstat_irqs on node 0 [ 0.470534] pcieport-driver 0000:00:1c.4: irq 28 for MSI/MSI-X [ 0.470556] pcieport-driver 0000:00:1c.4: setting latency timer to 64 [ 0.470942] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.471524] pciehp: Using ACPI for slot detection. [ 0.471658] pciehp 0000:00:1c.3:pcie04: HPC vendor_id 8086 device_id 2845 ss_vid 0 ss_did 0 [ 0.471761] pciehp 0000:00:1c.3:pcie04: service driver pciehp loaded [ 0.471816] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 0.472524] ACPI: AC Adapter [AC] (off-line) [ 0.472680] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0 [ 0.472683] ACPI: Power Button [PWRF] [ 0.472786] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input1 [ 0.473228] ACPI: Lid Switch [LID] [ 0.473313] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2 [ 0.473321] ACPI: Sleep Button [SLPB] [ 0.474090] ACPI: SSDT 000000007d6e1b32 002C4 (v01 PmRef Cpu0Ist 00000100 INTL 20050513) [ 0.474785] ACPI: SSDT 000000007d6e1e7b 0085E (v01 PmRef Cpu0Cst 00000100 INTL 20050513) [ 0.478229] Monitor-Mwait will be used to enter C-1 state [ 0.478253] Monitor-Mwait will be used to enter C-2 state [ 0.478277] Monitor-Mwait will be used to enter C-3 state [ 0.478347] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3]) [ 0.478416] processor LNXCPU:00: registered as cooling_device0 [ 0.478420] ACPI: Processor [CPU0] (supports 8 throttling states) [ 0.478785] ACPI: SSDT 000000007d6e1a6a 000C8 (v01 PmRef Cpu1Ist 00000100 INTL 20050513) [ 0.479251] ACPI: SSDT 000000007d6e1df6 00085 (v01 PmRef Cpu1Cst 00000100 INTL 20050513) [ 0.481126] ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3]) [ 0.481189] processor LNXCPU:01: registered as cooling_device1 [ 0.481193] ACPI: Processor [CPU1] (supports 8 throttling states) [ 0.489726] thermal LNXTHERM:01: registered as thermal_zone0 [ 0.489734] ACPI: Thermal Zone [THM0] (44 C) [ 0.491296] thermal LNXTHERM:02: registered as thermal_zone1 [ 0.491304] ACPI: Thermal Zone [THM1] (43 C) [ 0.495912] Linux agpgart interface v0.103 [ 0.495917] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.498838] brd: module loaded [ 0.499851] loop: module loaded [ 0.500091] input: Macintosh mouse button emulation as /devices/virtual/input/input3 [ 0.500350] ahci 0000:00:1f.2: version 3.0 [ 0.500374] ahci 0000:00:1f.2: PCI INT B -> GSI 16 (level, low) -> IRQ 16 [ 0.500469] alloc irq_desc for 29 on node 0 [ 0.500471] alloc kstat_irqs on node 0 [ 0.500483] ahci 0000:00:1f.2: irq 29 for MSI/MSI-X [ 0.500559] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 3 ports 1.5 Gbps 0x5 impl SATA mode [ 0.500563] ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part [ 0.500572] ahci 0000:00:1f.2: setting latency timer to 64 [ 0.500768] scsi0 : ahci [ 0.500995] scsi1 : ahci [ 0.501193] scsi2 : ahci [ 0.501367] ata1: SATA max UDMA/133 abar m2048@0xfe226000 port 0xfe226100 irq 29 [ 0.501369] ata2: DUMMY [ 0.501374] ata3: SATA max UDMA/133 abar m2048@0xfe226000 port 0xfe226200 irq 29 [ 0.501541] ata_piix 0000:00:1f.1: version 2.13 [ 0.501582] ata_piix 0000:00:1f.1: PCI INT C -> GSI 16 (level, low) -> IRQ 16 [ 0.501633] ata_piix 0000:00:1f.1: setting latency timer to 64 [ 0.501721] scsi3 : ata_piix [ 0.501896] scsi4 : ata_piix [ 0.502723] ata4: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x1c00 irq 14 [ 0.502726] ata5: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x1c08 irq 15 [ 0.503060] ata5: port disabled. ignoring. [ 0.506922] Fixed MDIO Bus: probed [ 0.507145] PPP generic driver version 2.4.2 [ 0.507445] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.510986] ehci_hcd 0000:00:1a.7: power state changed by ACPI to D0 [ 0.510999] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 22 (level, low) -> IRQ 22 [ 0.511018] ehci_hcd 0000:00:1a.7: setting latency timer to 64 [ 0.511024] ehci_hcd 0000:00:1a.7: EHCI Host Controller [ 0.511133] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1 [ 0.515095] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported [ 0.515113] ehci_hcd 0000:00:1a.7: irq 22, io mem 0xfe226c00 [ 0.527217] ACPI: Battery Slot [BAT0] (battery present) [ 0.528034] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00 [ 0.528193] usb usb1: configuration #1 chosen from 1 choice [ 0.528293] hub 1-0:1.0: USB hub found [ 0.528301] hub 1-0:1.0: 4 ports detected [ 0.532227] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0 [ 0.532239] alloc irq_desc for 19 on node 0 [ 0.532241] alloc kstat_irqs on node 0 [ 0.532247] ehci_hcd 0000:00:1d.7: PCI INT D -> GSI 19 (level, low) -> IRQ 19 [ 0.532262] ehci_hcd 0000:00:1d.7: setting latency timer to 64 [ 0.532268] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 0.532335] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2 [ 0.536273] ehci_hcd 0000:00:1d.7: debug port 1 [ 0.536286] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported [ 0.536333] ehci_hcd 0000:00:1d.7: irq 19, io mem 0xfe227000 [ 0.552019] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 0.552132] usb usb2: configuration #1 chosen from 1 choice [ 0.552201] hub 2-0:1.0: USB hub found [ 0.552208] hub 2-0:1.0: 6 ports detected [ 0.552322] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.552374] uhci_hcd: USB Universal Host Controller Interface driver [ 0.552502] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 [ 0.552514] uhci_hcd 0000:00:1a.0: setting latency timer to 64 [ 0.552519] uhci_hcd 0000:00:1a.0: UHCI Host Controller [ 0.552592] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3 [ 0.552638] uhci_hcd 0000:00:1a.0: irq 20, io base 0x00001860 [ 0.552769] usb usb3: configuration #1 chosen from 1 choice [ 0.552840] hub 3-0:1.0: USB hub found [ 0.552847] hub 3-0:1.0: 2 ports detected [ 0.553487] uhci_hcd 0000:00:1a.1: power state changed by ACPI to D0 [ 0.553495] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 [ 0.553503] uhci_hcd 0000:00:1a.1: setting latency timer to 64 [ 0.553509] uhci_hcd 0000:00:1a.1: UHCI Host Controller [ 0.553588] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4 [ 0.553631] uhci_hcd 0000:00:1a.1: irq 21, io base 0x00001880 [ 0.553753] usb usb4: configuration #1 chosen from 1 choice [ 0.553823] hub 4-0:1.0: USB hub found [ 0.553830] hub 4-0:1.0: 2 ports detected [ 0.554408] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0 [ 0.554416] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.554426] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [ 0.554432] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 0.554506] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5 [ 0.554551] uhci_hcd 0000:00:1d.0: irq 16, io base 0x000018a0 [ 0.554669] usb usb5: configuration #1 chosen from 1 choice [ 0.554741] hub 5-0:1.0: USB hub found [ 0.554748] hub 5-0:1.0: 2 ports detected [ 0.554836] alloc irq_desc for 17 on node 0 [ 0.554838] alloc kstat_irqs on node 0 [ 0.554843] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 0.554853] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [ 0.554859] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 0.554932] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6 [ 0.554975] uhci_hcd 0000:00:1d.1: irq 17, io base 0x000018c0 [ 0.555097] usb usb6: configuration #1 chosen from 1 choice [ 0.555168] hub 6-0:1.0: USB hub found [ 0.555176] hub 6-0:1.0: 2 ports detected [ 0.555746] uhci_hcd 0000:00:1d.2: power state changed by ACPI to D0 [ 0.555753] alloc irq_desc for 18 on node 0 [ 0.555754] alloc kstat_irqs on node 0 [ 0.555759] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 0.555769] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [ 0.555775] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 0.555850] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7 [ 0.555894] uhci_hcd 0000:00:1d.2: irq 18, io base 0x000018e0 [ 0.556036] usb usb7: configuration #1 chosen from 1 choice [ 0.556102] hub 7-0:1.0: USB hub found [ 0.556107] hub 7-0:1.0: 2 ports detected [ 0.556297] PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12 [ 0.565129] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.565135] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 0.565344] mice: PS/2 mouse device common for all mice [ 0.565626] rtc_cmos 00:07: RTC can wake from S4 [ 0.565692] rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0 [ 0.565730] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs [ 0.565927] device-mapper: uevent: version 1.0.3 [ 0.566075] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com [ 0.566170] device-mapper: multipath: version 1.1.0 loaded [ 0.566173] device-mapper: multipath round-robin: version 1.0.0 loaded [ 0.566741] cpuidle: using governor ladder [ 0.567394] cpuidle: using governor menu [ 0.567940] TCP cubic registered [ 0.568254] NET: Registered protocol family 10 [ 0.568694] lo: Disabled Privacy Extensions [ 0.568964] NET: Registered protocol family 17 [ 0.569035] Bluetooth: L2CAP ver 2.13 [ 0.569037] Bluetooth: L2CAP socket layer initialized [ 0.569040] Bluetooth: SCO (Voice Link) ver 0.6 [ 0.569042] Bluetooth: SCO socket layer initialized [ 0.569092] Bluetooth: RFCOMM TTY layer initialized [ 0.569095] Bluetooth: RFCOMM socket layer initialized [ 0.569097] Bluetooth: RFCOMM ver 1.11 [ 0.570077] PM: Resume from disk failed. [ 0.570090] registered taskstats version 1 [ 0.570203] Magic number: 9:623:591 [ 0.570327] rtc_cmos 00:07: setting system clock to 2009-09-25 16:34:29 UTC (1253896469) [ 0.570330] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 0.570332] EDD information not available. [ 0.570446] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4 [ 0.664771] ata4.00: ATAPI: DVD/CDRW UJDA775, CB03, max UDMA/33 [ 0.680494] ata4.00: configured for UDMA/33 [ 0.820085] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 0.820111] ata3: SATA link down (SStatus 0 SControl 300) [ 0.820922] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 succeeded [ 0.820927] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out [ 0.820932] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 filtered out [ 0.863282] ata1.00: ATA-7: WDC WD800BEVS-08RST2, 08.01G08, max UDMA/133 [ 0.863287] ata1.00: 156301488 sectors, multi 16: LBA48 NCQ (depth 31/32) [ 0.864503] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 succeeded [ 0.864509] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out [ 0.864514] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 filtered out [ 0.865288] ata1.00: configured for UDMA/133 [ 0.881772] ata1.00: configured for UDMA/133 [ 0.881777] ata1: EH complete [ 0.881893] scsi 0:0:0:0: Direct-Access ATA WDC WD800BEVS-08 08.0 PQ: 0 ANSI: 5 [ 0.882400] sd 0:0:0:0: [sda] 156301488 512-byte logical blocks: (80.0 GB/74.5 GiB) [ 0.882443] sd 0:0:0:0: [sda] Write Protect is off [ 0.882446] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 0.882469] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 0.882597] sda: [ 0.882797] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 0.884329] scsi 3:0:0:0: CD-ROM MATSHITA DVD/CDRW UJDA775 CB03 PQ: 0 ANSI: 5 [ 0.887854] sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray [ 0.887859] Uniform CD-ROM driver Revision: 3.20 [ 0.888198] sr 3:0:0:0: Attached scsi CD-ROM sr0 [ 0.888393] sr 3:0:0:0: Attached scsi generic sg1 type 5 [ 0.890956] sda1 sda2 < sda5 > sda3 sda4 [ 0.916042] sd 0:0:0:0: [sda] Attached SCSI disk [ 0.916081] Freeing unused kernel memory: 664k freed [ 0.916316] Write protecting the kernel read-only data: 7544k [ 1.001046] Clocksource tsc unstable (delta = -304364435 ns) [ 1.049733] xor: automatically using best checksumming function: generic_sse [ 1.068034] generic_sse: 8085.000 MB/sec [ 1.068036] xor: using function: generic_sse (8085.000 MB/sec) [ 1.070024] device-mapper: dm-raid45: initialized v0.2594b [ 1.107677] e1000e: Intel(R) PRO/1000 Network Driver - 1.0.2-k2 [ 1.107681] e1000e: Copyright (c) 1999-2008 Intel Corporation. [ 1.113926] e1000e 0000:00:19.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 [ 1.113935] e1000e 0000:00:19.0: pci_enable_pcie_error_reporting failed 0xfffffffb [ 1.113950] e1000e 0000:00:19.0: setting latency timer to 64 [ 1.114145] alloc irq_desc for 30 on node 0 [ 1.114147] alloc kstat_irqs on node 0 [ 1.114170] e1000e 0000:00:19.0: irq 30 for MSI/MSI-X [ 1.304100] usb 3-1: new full speed USB device using uhci_hcd and address 2 [ 1.346630] 0000:00:19.0: eth0: (PCI Express:2.5GB/s:Width x1) 00:1c:25:7a:94:25 [ 1.346633] 0000:00:19.0: eth0: Intel(R) PRO/1000 Network Connection [ 1.346673] 0000:00:19.0: eth0: MAC: 6, PHY: 6, PBA No: 1008ff-0ff [ 1.467812] usb 3-1: configuration #1 chosen from 1 choice [ 1.610759] PM: Starting manual resume from disk [ 1.610762] PM: Resume from partition 8:5 [ 1.610764] PM: Checking hibernation image. [ 1.610990] PM: Resume from disk failed. [ 1.664432] EXT4-fs (sda1): barriers enabled [ 1.672596] kjournald2 starting: pid 1146, dev sda1:8, commit interval 5 seconds [ 1.672643] EXT4-fs (sda1): delayed allocation enabled [ 1.672649] EXT4-fs: file extents enabled [ 1.672746] EXT4-fs: mballoc enabled [ 1.672759] EXT4-fs (sda1): mounted filesystem with ordered data mode [ 1.708085] usb 3-2: new full speed USB device using uhci_hcd and address 3 [ 1.881823] usb 3-2: configuration #1 chosen from 1 choice [ 2.121053] usb 6-2: new full speed USB device using uhci_hcd and address 2 [ 2.309142] usb 6-2: configuration #1 chosen from 1 choice [ 4.524169] udev: starting version 147 [ 5.590996] Non-volatile memory driver v1.3 [ 5.596679] Bluetooth: Generic Bluetooth USB driver ver 0.5 [ 5.596794] usbcore: registered new interface driver btusb [ 5.720778] lp: driver loaded but no devices found [ 5.721108] cfg80211: Calling CRDA to update world regulatory domain [ 5.735408] agpgart-intel 0000:00:00.0: Intel 965GM Chipset [ 5.736389] agpgart-intel 0000:00:00.0: detected 7676K stolen memory [ 5.739319] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xe0000000 [ 6.218930] yenta_cardbus 0000:15:00.0: CardBus bridge found [17aa:20c4] [ 6.260139] thinkpad_acpi: ThinkPad ACPI Extras v0.23 [ 6.260142] thinkpad_acpi: http://ibm-acpi.sf.net/ [ 6.260145] thinkpad_acpi: ThinkPad BIOS 7LETC6WW (2.26 ), EC 7KHT24WW-1.08 [ 6.260147] thinkpad_acpi: Lenovo ThinkPad T61, model 8896AB5 [ 6.264303] thinkpad_acpi: ACPI backlight control delay disabled [ 6.265077] thinkpad_acpi: radio switch found; radios are enabled [ 6.265257] thinkpad_acpi: This ThinkPad has standard ACPI backlight brightness control, supported by the ACPI video driver [ 6.265260] thinkpad_acpi: Disabling thinkpad-acpi brightness events by default... [ 6.275014] Registered led device: tpacpi::thinklight [ 6.275257] Registered led device: tpacpi::power [ 6.275432] Registered led device: tpacpi::standby [ 6.275593] Registered led device: tpacpi::thinkvantage [ 6.278328] thinkpad_acpi: Standard ACPI backlight interface available, not loading native one. [ 6.279050] input: ThinkPad Extra Buttons as /devices/virtual/input/input5 [ 6.310338] iwlagn: Intel(R) Wireless WiFi Link AGN driver for Linux, 1.3.27k [ 6.310341] iwlagn: Copyright(c) 2003-2009 Intel Corporation [ 6.310947] iwlagn 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 6.310980] iwlagn 0000:03:00.0: setting latency timer to 64 [ 6.311039] iwlagn 0000:03:00.0: Detected Intel Wireless WiFi Link 4965AGN REV=0x4 [ 6.363832] yenta_cardbus 0000:15:00.0: ISA IRQ mask 0x0cb8, PCI irq 16 [ 6.363838] yenta_cardbus 0000:15:00.0: Socket status: 30000006 [ 6.363844] yenta_cardbus 0000:15:00.0: pcmcia: parent PCI bridge I/O window: 0x7000 - 0xafff [ 6.363848] yenta_cardbus 0000:15:00.0: pcmcia: parent PCI bridge Memory window: 0xf8300000 - 0xfbffffff [ 6.363852] yenta_cardbus 0000:15:00.0: pcmcia: parent PCI bridge Memory window: 0xf4000000 - 0xf7ffffff [ 6.363896] iwlagn 0000:03:00.0: Tunable channels: 13 802.11bg, 19 802.11a channels [ 6.363988] alloc irq_desc for 31 on node 0 [ 6.363990] alloc kstat_irqs on node 0 [ 6.364022] iwlagn 0000:03:00.0: irq 31 for MSI/MSI-X [ 6.679338] Synaptics Touchpad, model: 1, fw: 6.2, id: 0x81a0b1, caps: 0xa04793/0x300000 [ 6.679346] serio: Synaptics pass-through port at isa0060/serio1/input0 [ 6.717565] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input6 [ 6.944457] [drm] Initialized drm 1.1.0 20060810 [ 6.948139] phy0: Selected rate control algorithm 'iwl-agn-rs' [ 7.215164] i915 0000:00:02.0: power state changed by ACPI to D0 [ 7.215174] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 7.215178] i915 0000:00:02.0: setting latency timer to 64 [ 7.222256] alloc irq_desc for 32 on node 0 [ 7.222260] alloc kstat_irqs on node 0 [ 7.222269] i915 0000:00:02.0: irq 32 for MSI/MSI-X [ 7.783542] [drm] fb0: inteldrmfb frame buffer device [ 7.787401] acpi device:03: registered as cooling_device2 [ 7.787858] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:02/input/input7 [ 7.787952] ACPI: Video Device [VID] (multi-head: yes rom: no post: no) [ 7.788188] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0 [ 7.823063] cfg80211: World regulatory domain updated: [ 7.823066] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 7.823069] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 7.823072] (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 7.823074] (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 7.823076] (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 7.823079] (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 7.884408] HDA Intel 0000:00:1b.0: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 7.884412] hda_intel: probe_mask set to 0x1 for device 17aa:20ac [ 7.884441] HDA Intel 0000:00:1b.0: setting latency timer to 64 [ 8.347769] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input8 [ 9.167845] Adding 3229024k swap on /dev/sda5. Priority:-1 extents:1 across:3229024k [ 9.257304] EXT4-fs (sda1): internal journal on sda1:8 [ 9.606225] EXT4-fs (sda3): barriers enabled [ 9.617962] kjournald2 starting: pid 1580, dev sda3:8, commit interval 5 seconds [ 9.617980] EXT4-fs (sda3): warning: maximal mount count reached, running e2fsck is recommended [ 9.618323] EXT4-fs (sda3): internal journal on sda3:8 [ 9.618330] EXT4-fs (sda3): delayed allocation enabled [ 9.618335] EXT4-fs: file extents enabled [ 9.618483] EXT4-fs: mballoc enabled [ 9.618504] EXT4-fs (sda3): mounted filesystem with ordered data mode [ 12.229259] IBM TrackPoint firmware: 0x0e, buttons: 3/3 [ 12.437219] input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/serio2/input/input9 [ 14.746426] EXT4-fs (sda4): barriers enabled [ 14.759646] kjournald2 starting: pid 1635, dev sda4:8, commit interval 5 seconds [ 14.759662] EXT4-fs (sda4): warning: maximal mount count reached, running e2fsck is recommended [ 14.929818] EXT4-fs (sda4): internal journal on sda4:8 [ 14.929822] EXT4-fs (sda4): delayed allocation enabled [ 14.929826] EXT4-fs: file extents enabled [ 14.929890] EXT4-fs: mballoc enabled [ 14.929905] EXT4-fs (sda4): mounted filesystem with ordered data mode [ 15.607891] type=1505 audit(1253896484.533:2): operation="profile_load" pid=1685 name=/sbin/dhclient3 [ 15.608704] type=1505 audit(1253896484.533:3): operation="profile_load" pid=1685 name=/usr/lib/NetworkManager/nm-dhcp-client.action [ 15.609090] type=1505 audit(1253896484.538:4): operation="profile_load" pid=1685 name=/usr/lib/connman/scripts/dhclient-script [ 15.611271] type=1505 audit(1253896484.538:5): operation="profile_load" pid=1686 name=/usr/sbin/tcpdump [ 15.613258] type=1505 audit(1253896484.542:6): operation="profile_load" pid=1687 name=/usr/share/gdm/guest-session/Xsession [ 15.631837] type=1505 audit(1253896484.558:7): operation="profile_load" pid=1689 name=/usr/lib/cups/backend/cups-pdf [ 15.632728] type=1505 audit(1253896484.558:8): operation="profile_load" pid=1689 name=/usr/sbin/cupsd [ 15.664134] type=1505 audit(1253896484.590:9): operation="profile_load" pid=1690 name=/usr/bin/evince [ 15.672887] type=1505 audit(1253896484.598:10): operation="profile_load" pid=1690 name=/usr/bin/evince-previewer [ 15.678133] type=1505 audit(1253896484.606:11): operation="profile_load" pid=1690 name=/usr/bin/evince-thumbnailer [ 16.360412] e1000e 0000:00:19.0: irq 30 for MSI/MSI-X [ 16.416206] e1000e 0000:00:19.0: irq 30 for MSI/MSI-X [ 16.416600] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 16.489683] iwlagn 0000:03:00.0: firmware: requesting iwlwifi-4965-2.ucode [ 16.688603] iwlagn 0000:03:00.0: loaded firmware version 228.61.2.24 [ 16.907059] Registered led device: iwl-phy0::radio [ 16.907079] Registered led device: iwl-phy0::assoc [ 16.907099] Registered led device: iwl-phy0::RX [ 16.907115] Registered led device: iwl-phy0::TX [ 16.953787] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 19.454362] Console: switching to colour frame buffer device 128x48 [ 19.456023] hda-intel: azx_get_response timeout, switching to polling mode: last cmd=0x012f000c [ 19.803538] [drm] LVDS-8: set mode 1024x768 c [ 24.643098] hdaps: inverting axis (3) readings. [ 24.643100] hdaps: LENOVO ThinkPad T61 detected. [ 24.643687] input: hdaps as /devices/platform/hdaps/input/input10 [ 24.643746] hdaps: driver successfully loaded. [ 27.198936] wlan0: authenticate with AP 00:23:08:57:98:ed [ 27.200735] wlan0: authenticated [ 27.200740] wlan0: associate with AP 00:23:08:57:98:ed [ 27.204469] wlan0: RX AssocResp from 00:23:08:57:98:ed (capab=0x411 status=0 aid=1) [ 27.204474] wlan0: associated [ 27.226628] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 27.291109] cfg80211: Calling CRDA for country: DE [ 27.293506] cfg80211: Received country IE: [ 27.293509] cfg80211: Regulatory domain: DE [ 27.293510] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 27.293513] (2402000 KHz - 2494000 KHz @ 40000 KHz), (10000 mBi, 10000 mBm) [ 27.293514] cfg80211: CRDA thinks this should applied: [ 27.293516] cfg80211: Regulatory domain: DE [ 27.293517] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 27.293520] (2400000 KHz - 2483500 KHz @ 40000 KHz), (N/A, 2000 mBm) [ 27.293522] (5150000 KHz - 5350000 KHz @ 40000 KHz), (N/A, 2000 mBm) [ 27.293524] (5470000 KHz - 5725000 KHz @ 40000 KHz), (N/A, 2698 mBm) [ 27.293526] cfg80211: We intersect both of these and get: [ 27.293527] cfg80211: Regulatory domain: 98 [ 27.293529] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 27.293531] (2402000 KHz - 2483500 KHz @ 40000 KHz), (N/A, 2000 mBm) [ 27.293535] cfg80211: Leaving channel 5180 MHz intact on phy0 - no rule found in band on Country IE [ 27.293537] cfg80211: Leaving channel 5200 MHz intact on phy0 - no rule found in band on Country IE [ 27.293540] cfg80211: Leaving channel 5220 MHz intact on phy0 - no rule found in band on Country IE [ 27.293542] cfg80211: Leaving channel 5240 MHz intact on phy0 - no rule found in band on Country IE [ 27.293544] cfg80211: Leaving channel 5260 MHz intact on phy0 - no rule found in band on Country IE [ 27.293546] cfg80211: Leaving channel 5280 MHz intact on phy0 - no rule found in band on Country IE [ 27.293548] cfg80211: Leaving channel 5300 MHz intact on phy0 - no rule found in band on Country IE [ 27.293550] cfg80211: Leaving channel 5320 MHz intact on phy0 - no rule found in band on Country IE [ 27.293553] cfg80211: Leaving channel 5500 MHz intact on phy0 - no rule found in band on Country IE [ 27.293555] cfg80211: Leaving channel 5520 MHz intact on phy0 - no rule found in band on Country IE [ 27.293557] cfg80211: Leaving channel 5540 MHz intact on phy0 - no rule found in band on Country IE [ 27.293559] cfg80211: Leaving channel 5560 MHz intact on phy0 - no rule found in band on Country IE [ 27.293561] cfg80211: Leaving channel 5580 MHz intact on phy0 - no rule found in band on Country IE [ 27.293563] cfg80211: Leaving channel 5600 MHz intact on phy0 - no rule found in band on Country IE [ 27.293566] cfg80211: Leaving channel 5620 MHz intact on phy0 - no rule found in band on Country IE [ 27.293568] cfg80211: Leaving channel 5640 MHz intact on phy0 - no rule found in band on Country IE [ 27.293570] cfg80211: Leaving channel 5660 MHz intact on phy0 - no rule found in band on Country IE [ 27.293572] cfg80211: Leaving channel 5680 MHz intact on phy0 - no rule found in band on Country IE [ 27.293574] cfg80211: Leaving channel 5700 MHz intact on phy0 - no rule found in band on Country IE [ 27.293578] cfg80211: Current regulatory domain updated by AP to: DE [ 27.293580] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 27.293582] (2402000 KHz - 2483500 KHz @ 40000 KHz), (N/A, 2000 mBm) [ 27.453494] input: Mouseemu virtual keyboard as /devices/virtual/input/input11 [ 27.453937] input: Mouseemu virtual mouse as /devices/virtual/input/input12 [ 31.314591] Intel AES-NI instructions are not detected. [ 31.352807] padlock: VIA PadLock not detected. [ 34.106665] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 34.106668] Bluetooth: BNEP filters: protocol multicast [ 34.148067] Bridge firewalling registered [ 34.190034] ppdev: user-space parallel port driver [ 37.980062] wlan0: no IPv6 routers present [ 115.355080] CE: hpet increasing min_delta_ns to 15000 nsec [ 164.132272] CE: hpet increasing min_delta_ns to 22500 nsec