[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.31-10-generic (buildd@palmer) (gcc version 4.4.1 (Ubuntu 4.4.1-3ubuntu3) ) #32-Ubuntu SMP Thu Sep 10 23:33:50 UTC 2009 (Ubuntu 2.6.31-10.32-generic) [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] NSC Geode by NSC [ 0.000000] Cyrix CyrixInstead [ 0.000000] Centaur CentaurHauls [ 0.000000] Transmeta GenuineTMx86 [ 0.000000] Transmeta TransmetaCPU [ 0.000000] UMC UMC UMC UMC [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable) [ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000003fff0000 (usable) [ 0.000000] BIOS-e820: 000000003fff0000 - 000000003fff3000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000003fff3000 - 0000000040000000 (ACPI data) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved) [ 0.000000] DMI 2.2 present. [ 0.000000] Phoenix BIOS detected: BIOS may corrupt low RAM, working around it. [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) [ 0.000000] last_pfn = 0x3fff0 max_arch_pfn = 0x100000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-AFFFF uncachable [ 0.000000] B0000-BFFFF write-combining [ 0.000000] C0000-C7FFF write-protect [ 0.000000] C8000-FFFFF uncachable [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000 mask FC0000000 write-back [ 0.000000] 1 base 0E0000000 mask FF8000000 write-combining [ 0.000000] 2 disabled [ 0.000000] 3 disabled [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] Scanning 0 areas for low memory corruption [ 0.000000] modified physical RAM map: [ 0.000000] modified: 0000000000000000 - 0000000000010000 (reserved) [ 0.000000] modified: 0000000000010000 - 000000000009f800 (usable) [ 0.000000] modified: 000000000009f800 - 00000000000a0000 (reserved) [ 0.000000] modified: 00000000000f0000 - 0000000000100000 (reserved) [ 0.000000] modified: 0000000000100000 - 000000003fff0000 (usable) [ 0.000000] modified: 000000003fff0000 - 000000003fff3000 (ACPI NVS) [ 0.000000] modified: 000000003fff3000 - 0000000040000000 (ACPI data) [ 0.000000] modified: 00000000fec00000 - 00000000fec01000 (reserved) [ 0.000000] modified: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] modified: 00000000ffff0000 - 0000000100000000 (reserved) [ 0.000000] initial memory mapped : 0 - 00c00000 [ 0.000000] init_memory_mapping: 0000000000000000-00000000377fe000 [ 0.000000] Using x86 segment limits to approximate NX protection [ 0.000000] 0000000000 - 0000400000 page 4k [ 0.000000] 0000400000 - 0037400000 page 2M [ 0.000000] 0037400000 - 00377fe000 page 4k [ 0.000000] kernel direct mapping tables up to 377fe000 @ 10000-15000 [ 0.000000] RAMDISK: 2f94b000 - 3003365e [ 0.000000] ACPI: RSDP 000f75e0 00014 (v00 Nvidia) [ 0.000000] ACPI: RSDT 3fff3000 0002C (v01 Nvidia AWRDACPI 42302E31 AWRD 00000000) [ 0.000000] ACPI: FACP 3fff3040 00074 (v01 Nvidia AWRDACPI 42302E31 AWRD 00000000) [ 0.000000] ACPI: DSDT 3fff30c0 04561 (v01 NVIDIA AWRDACPI 00001000 MSFT 0100000E) [ 0.000000] ACPI: FACS 3fff0000 00040 [ 0.000000] ACPI: APIC 3fff7640 0006E (v01 Nvidia AWRDACPI 42302E31 AWRD 00000000) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] 135MB HIGHMEM available. [ 0.000000] 887MB LOWMEM available. [ 0.000000] mapped low ram: 0 - 377fe000 [ 0.000000] low ram: 0 - 377fe000 [ 0.000000] node 0 low ram: 00000000 - 377fe000 [ 0.000000] node 0 bootmap 00011000 - 00017f00 [ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 00377fe000] [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] [ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000] [ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000] [ 0.000000] #3 [0000100000 - 00008a0080] TEXT DATA BSS ==> [0000100000 - 00008a0080] [ 0.000000] #4 [002f94b000 - 003003365e] RAMDISK ==> [002f94b000 - 003003365e] [ 0.000000] #5 [000009f800 - 0000100000] BIOS reserved ==> [000009f800 - 0000100000] [ 0.000000] #6 [00008a1000 - 00008a4141] BRK ==> [00008a1000 - 00008a4141] [ 0.000000] #7 [0000010000 - 0000011000] PGTABLE ==> [0000010000 - 0000011000] [ 0.000000] #8 [0000011000 - 0000018000] BOOTMAP ==> [0000011000 - 0000018000] [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000010 -> 0x00001000 [ 0.000000] Normal 0x00001000 -> 0x000377fe [ 0.000000] HighMem 0x000377fe -> 0x0003fff0 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[2] active PFN ranges [ 0.000000] 0: 0x00000010 -> 0x0000009f [ 0.000000] 0: 0x00000100 -> 0x0003fff0 [ 0.000000] On node 0 totalpages: 262015 [ 0.000000] free_area_init_node: node 0, pgdat c077b840, node_mem_map c1000200 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 3951 pages, LIFO batch:0 [ 0.000000] Normal zone: 1744 pages used for memmap [ 0.000000] Normal zone: 221486 pages, LIFO batch:31 [ 0.000000] HighMem zone: 272 pages used for memmap [ 0.000000] HighMem zone: 34530 pages, LIFO batch:7 [ 0.000000] Using APIC driver default [ 0.000000] Nvidia board detected. Ignoring ACPI timer override. [ 0.000000] If you got timer trouble try acpi_use_timer_override [ 0.000000] ACPI: PM-Timer IO Port: 0x4008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: BIOS IRQ0 pin2 override ignored. [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge) [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] ACPI: IRQ14 used by override. [ 0.000000] ACPI: IRQ15 used by override. [ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] SMP: Allowing 1 CPUs, 0 hotplug CPUs [ 0.000000] nr_irqs_gsi: 24 [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000 [ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000 [ 0.000000] Allocating PCI resources starting at 40000000 (gap: 40000000:bec00000) [ 0.000000] NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:1 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 14 pages at c1805000, static data 35036 bytes [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 259967 [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.31-10-generic root=UUID=92503525-cb75-4aac-b1fd-33134460f1cb ro quiet splash [ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Enabling fast FPU save and restore... done. [ 0.000000] Enabling unmasked SIMD FPU exception support... done. [ 0.000000] Initializing CPU#0 [ 0.000000] allocated 5242240 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] Initializing HighMem for node 0 (000377fe:0003fff0) [ 0.000000] Memory: 1018552k/1048512k available (4543k kernel code, 29104k reserved, 2129k data, 544k init, 139208k highmem) [ 0.000000] virtual kernel memory layout: [ 0.000000] fixmap : 0xfff1d000 - 0xfffff000 ( 904 kB) [ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB) [ 0.000000] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB) [ 0.000000] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB) [ 0.000000] .init : 0xc0785000 - 0xc080d000 ( 544 kB) [ 0.000000] .data : 0xc056fc94 - 0xc07841a8 (2129 kB) [ 0.000000] .text : 0xc0100000 - 0xc056fc94 (4543 kB) [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.000000] SLUB: Genslabs=13, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.000000] NR_IRQS:2304 nr_irqs:256 [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 1837.635 MHz processor. [ 0.001865] Console: colour VGA+ 80x25 [ 0.001870] console [tty0] enabled [ 0.004010] Calibrating delay loop (skipped), value calculated using timer frequency.. 3675.27 BogoMIPS (lpj=7350540) [ 0.004039] Security Framework initialized [ 0.004074] AppArmor: AppArmor initialized [ 0.004085] Mount-cache hash table entries: 512 [ 0.004261] Initializing cgroup subsys ns [ 0.004267] Initializing cgroup subsys cpuacct [ 0.004272] Initializing cgroup subsys memory [ 0.004284] Initializing cgroup subsys freezer [ 0.004287] Initializing cgroup subsys net_cls [ 0.004303] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 0.004307] CPU: L2 Cache: 256K (64 bytes/line) [ 0.004321] Performance Counters: AMD PMU driver. [ 0.004329] ... version: 0 [ 0.004332] ... bit width: 48 [ 0.004334] ... generic counters: 4 [ 0.004337] ... value mask: 0000ffffffffffff [ 0.004339] ... max period: 00007fffffffffff [ 0.004342] ... fixed-purpose counters: 0 [ 0.004344] ... counter mask: 000000000000000f [ 0.004349] Checking 'hlt' instruction... OK. [ 0.020543] SMP alternatives: switching to UP code [ 0.026510] Freeing SMP alternatives: 19k freed [ 0.026541] ACPI: Core revision 20090521 [ 0.034556] ..TIMER: vector=0x30 apic1=0 pin1=0 apic2=-1 pin2=-1 [ 0.074245] CPU0: AMD Sempron(tm) 2600+ stepping 01 [ 0.076001] Brought up 1 CPUs [ 0.076001] Total of 1 processors activated (3675.27 BogoMIPS). [ 0.076001] CPU0 attaching NULL sched-domain. [ 0.076001] Booting paravirtualized kernel on bare hardware [ 0.076001] regulator: core version 0.5 [ 0.076001] Time: 16:08:31 Date: 09/15/09 [ 0.076001] NET: Registered protocol family 16 [ 0.076001] EISA bus registered [ 0.076001] ACPI: bus type pci registered [ 0.105984] PCI: PCI BIOS revision 2.10 entry at 0xfb410, last bus=3 [ 0.105987] PCI: Using configuration type 1 for base access [ 0.113420] bio: create slab at 0 [ 0.114413] ACPI: EC: Look up EC in DSDT [ 0.121262] ACPI: Interpreter enabled [ 0.121270] ACPI: (supports S0 S1 S3 S4 S5) [ 0.121301] ACPI: Using IOAPIC for interrupt routing [ 0.132478] ACPI: No dock devices found. [ 0.132620] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 0.132732] pci 0000:00:00.0: reg 10 32bit mmio: [0xe0000000-0xe7ffffff] [ 0.132750] pci 0000:00:00.0: nForce2 C1 Halt Disconnect fixup [ 0.132966] pci 0000:00:01.1: reg 10 io port: [0xdc00-0xdc1f] [ 0.133003] pci 0000:00:01.1: PME# supported from D3hot D3cold [ 0.133009] pci 0000:00:01.1: PME# disabled [ 0.133042] pci 0000:00:02.0: reg 10 32bit mmio: [0xed087000-0xed087fff] [ 0.133079] pci 0000:00:02.0: supports D1 D2 [ 0.133081] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.133086] pci 0000:00:02.0: PME# disabled [ 0.133114] pci 0000:00:02.1: reg 10 32bit mmio: [0xed082000-0xed082fff] [ 0.133150] pci 0000:00:02.1: supports D1 D2 [ 0.133153] pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold [ 0.133158] pci 0000:00:02.1: PME# disabled [ 0.133192] pci 0000:00:02.2: reg 10 32bit mmio: [0xed083000-0xed0830ff] [ 0.133234] pci 0000:00:02.2: supports D1 D2 [ 0.133237] pci 0000:00:02.2: PME# supported from D0 D1 D2 D3hot D3cold [ 0.133242] pci 0000:00:02.2: PME# disabled [ 0.133278] pci 0000:00:04.0: reg 10 32bit mmio: [0xed086000-0xed086fff] [ 0.133285] pci 0000:00:04.0: reg 14 io port: [0xe000-0xe007] [ 0.133317] pci 0000:00:04.0: supports D1 D2 [ 0.133320] pci 0000:00:04.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.133325] pci 0000:00:04.0: PME# disabled [ 0.133353] pci 0000:00:05.0: reg 10 32bit mmio: [0xed000000-0xed07ffff] [ 0.133389] pci 0000:00:05.0: supports D1 D2 [ 0.133417] pci 0000:00:06.0: reg 10 io port: [0xe400-0xe4ff] [ 0.133424] pci 0000:00:06.0: reg 14 io port: [0xd000-0xd07f] [ 0.133431] pci 0000:00:06.0: reg 18 32bit mmio: [0xed080000-0xed080fff] [ 0.133460] pci 0000:00:06.0: supports D1 D2 [ 0.133527] pci 0000:00:09.0: reg 20 io port: [0xf000-0xf00f] [ 0.133579] pci 0000:00:0d.0: reg 10 32bit mmio: [0xed084000-0xed0847ff] [ 0.133586] pci 0000:00:0d.0: reg 14 32bit mmio: [0xed085000-0xed08503f] [ 0.133619] pci 0000:00:0d.0: supports D1 D2 [ 0.133621] pci 0000:00:0d.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.133626] pci 0000:00:0d.0: PME# disabled [ 0.133719] pci 0000:01:04.0: reg 10 32bit mmio: [0xec000000-0xec003fff] [ 0.133728] pci 0000:01:04.0: reg 14 io port: [0x9000-0x90ff] [ 0.133757] pci 0000:01:04.0: reg 30 32bit mmio: [0x000000-0x01ffff] [ 0.133782] pci 0000:01:04.0: supports D1 D2 [ 0.133785] pci 0000:01:04.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.133790] pci 0000:01:04.0: PME# disabled [ 0.133838] pci 0000:01:0b.0: reg 10 io port: [0x9400-0x9407] [ 0.133847] pci 0000:01:0b.0: reg 14 io port: [0x9800-0x9803] [ 0.133855] pci 0000:01:0b.0: reg 18 io port: [0x9c00-0x9c07] [ 0.133863] pci 0000:01:0b.0: reg 1c io port: [0xa000-0xa003] [ 0.133872] pci 0000:01:0b.0: reg 20 io port: [0xa400-0xa40f] [ 0.133880] pci 0000:01:0b.0: reg 24 32bit mmio: [0xec004000-0xec0041ff] [ 0.133889] pci 0000:01:0b.0: reg 30 32bit mmio: [0x000000-0x07ffff] [ 0.133910] pci 0000:01:0b.0: supports D1 D2 [ 0.133946] pci 0000:00:08.0: bridge io port: [0x9000-0xafff] [ 0.133951] pci 0000:00:08.0: bridge 32bit mmio: [0xeb000000-0xecffffff] [ 0.133998] pci 0000:03:00.0: reg 10 32bit mmio: [0xd0000000-0xdfffffff] [ 0.134007] pci 0000:03:00.0: reg 14 io port: [0xc000-0xc0ff] [ 0.134015] pci 0000:03:00.0: reg 18 32bit mmio: [0xea000000-0xea00ffff] [ 0.134036] pci 0000:03:00.0: reg 30 32bit mmio: [0x000000-0x01ffff] [ 0.134062] pci 0000:03:00.0: supports D1 D2 [ 0.134102] pci 0000:00:1e.0: bridge io port: [0xc000-0xcfff] [ 0.134106] pci 0000:00:1e.0: bridge 32bit mmio: [0xe9000000-0xeaffffff] [ 0.134111] pci 0000:00:1e.0: bridge 32bit mmio pref: [0xd0000000-0xdfffffff] [ 0.134123] pci_bus 0000:00: on NUMA node 0 [ 0.134130] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.134281] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT] [ 0.134583] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGPB._PRT] [ 0.191903] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. [ 0.192083] ACPI: PCI Interrupt Link [LNK2] (IRQs 3 4 *5 6 7 9 10 11 12 14 15) [ 0.192234] ACPI: PCI Interrupt Link [LNK3] (IRQs 3 4 5 6 7 9 10 *11 12 14 15) [ 0.192382] ACPI: PCI Interrupt Link [LNK4] (IRQs 3 4 5 6 7 9 10 *11 12 14 15) [ 0.192529] ACPI: PCI Interrupt Link [LNK5] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. [ 0.192678] ACPI: PCI Interrupt Link [LUBA] (IRQs 3 4 5 6 7 9 10 *11 12 14 15) [ 0.192833] ACPI: PCI Interrupt Link [LUBB] (IRQs 3 4 5 6 7 *9 10 11 12 14 15) [ 0.192981] ACPI: PCI Interrupt Link [LMAC] (IRQs 3 4 5 6 7 *9 10 11 12 14 15) [ 0.193130] ACPI: PCI Interrupt Link [LAPU] (IRQs 3 4 5 6 7 *9 10 11 12 14 15) [ 0.193278] ACPI: PCI Interrupt Link [LACI] (IRQs 3 4 *5 6 7 9 10 11 12 14 15) [ 0.193424] ACPI: PCI Interrupt Link [LMCI] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. [ 0.193573] ACPI: PCI Interrupt Link [LSMB] (IRQs 3 4 *5 6 7 9 10 11 12 14 15) [ 0.193721] ACPI: PCI Interrupt Link [LUB2] (IRQs 3 4 *5 6 7 9 10 11 12 14 15) [ 0.193873] ACPI: PCI Interrupt Link [LFIR] (IRQs 3 4 5 6 7 *9 10 11 12 14 15) [ 0.194020] ACPI: PCI Interrupt Link [L3CM] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. [ 0.194168] ACPI: PCI Interrupt Link [LIDE] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. [ 0.194308] ACPI: PCI Interrupt Link [APC1] (IRQs *16), disabled. [ 0.194436] ACPI: PCI Interrupt Link [APC2] (IRQs *17) [ 0.194555] ACPI: PCI Interrupt Link [APC3] (IRQs *18) [ 0.194674] ACPI: PCI Interrupt Link [APC4] (IRQs *19) [ 0.194792] ACPI: PCI Interrupt Link [APC5] (IRQs *16), disabled. [ 0.194978] ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22) *0 [ 0.195155] ACPI: PCI Interrupt Link [APCG] (IRQs 20 21 22) *0 [ 0.195330] ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22) *0 [ 0.195505] ACPI: PCI Interrupt Link [APCI] (IRQs 20 21 22) *0 [ 0.195679] ACPI: PCI Interrupt Link [APCJ] (IRQs 20 21 22) *0 [ 0.195853] ACPI: PCI Interrupt Link [APCK] (IRQs 20 21 22) *0, disabled. [ 0.195975] ACPI: PCI Interrupt Link [APCS] (IRQs *23) [ 0.196160] ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22) *0 [ 0.196335] ACPI: PCI Interrupt Link [APCM] (IRQs 20 21 22) *0 [ 0.196510] ACPI: PCI Interrupt Link [AP3C] (IRQs 20 21 22) *0, disabled. [ 0.196685] ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22) *0, disabled. [ 0.197348] SCSI subsystem initialized [ 0.197411] libata version 3.00 loaded. [ 0.197713] usbcore: registered new interface driver usbfs [ 0.197779] usbcore: registered new interface driver hub [ 0.197860] usbcore: registered new device driver usb [ 0.198444] ACPI: WMI: Mapper loaded [ 0.198448] PCI: Using ACPI for IRQ routing [ 0.198757] Bluetooth: Core ver 2.15 [ 0.198844] NET: Registered protocol family 31 [ 0.198847] Bluetooth: HCI device and connection manager initialized [ 0.198851] Bluetooth: HCI socket layer initialized [ 0.198854] NetLabel: Initializing [ 0.198856] NetLabel: domain hash size = 128 [ 0.198858] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.198879] NetLabel: unlabeled traffic allowed by default [ 0.201658] pnp: PnP ACPI init [ 0.201690] ACPI: bus type pnp registered [ 0.207863] pnp: PnP ACPI: found 15 devices [ 0.207867] ACPI: ACPI bus type pnp unregistered [ 0.207872] PnPBIOS: Disabled by ACPI PNP [ 0.207896] system 00:00: ioport range 0x4000-0x407f has been reserved [ 0.207900] system 00:00: ioport range 0x4080-0x40ff has been reserved [ 0.207905] system 00:00: ioport range 0x4400-0x447f has been reserved [ 0.207909] system 00:00: ioport range 0x4480-0x44ff has been reserved [ 0.207913] system 00:00: ioport range 0x4200-0x427f has been reserved [ 0.207916] system 00:00: ioport range 0x4280-0x42ff has been reserved [ 0.207925] system 00:01: ioport range 0x5000-0x503f has been reserved [ 0.207929] system 00:01: ioport range 0x5500-0x553f has been reserved [ 0.207939] system 00:02: iomem range 0xd8800-0xdbfff has been reserved [ 0.207943] system 00:02: iomem range 0xf0000-0xf7fff could not be reserved [ 0.207947] system 00:02: iomem range 0xf8000-0xfbfff could not be reserved [ 0.207951] system 00:02: iomem range 0xfc000-0xfffff could not be reserved [ 0.207955] system 00:02: iomem range 0x3fff0000-0x3fffffff could not be reserved [ 0.207960] system 00:02: iomem range 0xffff0000-0xffffffff has been reserved [ 0.207964] system 00:02: iomem range 0x0-0x9ffff could not be reserved [ 0.207968] system 00:02: iomem range 0x100000-0x3ffeffff could not be reserved [ 0.207973] system 00:02: iomem range 0xfec00000-0xfec00fff could not be reserved [ 0.207977] system 00:02: iomem range 0xfee00000-0xfee00fff has been reserved [ 0.207986] system 00:04: ioport range 0x4d0-0x4d1 has been reserved [ 0.243206] AppArmor: AppArmor Filesystem Enabled [ 0.243260] pci 0000:00:08.0: PCI bridge, secondary bus 0000:01 [ 0.243265] pci 0000:00:08.0: IO window: 0x9000-0xafff [ 0.243272] pci 0000:00:08.0: MEM window: 0xeb000000-0xecffffff [ 0.243278] pci 0000:00:08.0: PREFETCH window: 0x40000000-0x400fffff [ 0.243284] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:03 [ 0.243288] pci 0000:00:1e.0: IO window: 0xc000-0xcfff [ 0.243294] pci 0000:00:1e.0: MEM window: 0xe9000000-0xeaffffff [ 0.243299] pci 0000:00:1e.0: PREFETCH window: 0xd0000000-0xdfffffff [ 0.243313] pci 0000:00:08.0: setting latency timer to 64 [ 0.243323] pci_bus 0000:00: resource 0 io: [0x00-0xffff] [ 0.243327] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff] [ 0.243331] pci_bus 0000:01: resource 0 io: [0x9000-0xafff] [ 0.243334] pci_bus 0000:01: resource 1 mem: [0xeb000000-0xecffffff] [ 0.243338] pci_bus 0000:01: resource 2 pref mem [0x40000000-0x400fffff] [ 0.243342] pci_bus 0000:03: resource 0 io: [0xc000-0xcfff] [ 0.243345] pci_bus 0000:03: resource 1 mem: [0xe9000000-0xeaffffff] [ 0.243349] pci_bus 0000:03: resource 2 pref mem [0xd0000000-0xdfffffff] [ 0.243402] NET: Registered protocol family 2 [ 0.243521] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.244018] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.245417] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 0.246193] TCP: Hash tables configured (established 131072 bind 65536) [ 0.246198] TCP reno registered [ 0.246331] NET: Registered protocol family 1 [ 0.246424] Trying to unpack rootfs image as initramfs... [ 0.478703] Freeing initrd memory: 7073k freed [ 0.487493] cpufreq-nforce2: Detected nForce2 chipset revision C1 [ 0.487497] cpufreq-nforce2: FSB changing is maybe unstable and can lead to crashes and data loss. [ 0.487510] cpufreq-nforce2: FSB currently at 167 MHz, FID 11.0 [ 0.487750] Scanning for low memory corruption every 60 seconds [ 0.488108] audit: initializing netlink socket (disabled) [ 0.488128] type=2000 audit(1253030910.487:1): initialized [ 0.498070] highmem bounce pool size: 64 pages [ 0.498078] HugeTLB registered 4 MB page size, pre-allocated 0 pages [ 0.502420] VFS: Disk quotas dquot_6.5.2 [ 0.502563] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.503846] fuse init (API version 7.12) [ 0.504806] msgmni has been set to 1732 [ 0.505135] alg: No test for stdrng (krng) [ 0.505150] io scheduler noop registered [ 0.505153] io scheduler anticipatory registered [ 0.505156] io scheduler deadline registered [ 0.505277] io scheduler cfq registered (default) [ 0.560042] pci 0000:03:00.0: Boot video device [ 0.560283] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.560441] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 0.560859] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0 [ 0.560864] ACPI: Power Button [PWRF] [ 0.560984] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1 [ 0.560989] ACPI: Power Button [PWRB] [ 0.561569] processor LNXCPU:00: registered as cooling_device0 [ 0.565479] isapnp: Scanning for PnP cards... [ 0.759994] Switched to high resolution mode on CPU 0 [ 0.919708] isapnp: No Plug & Play device found [ 0.924597] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.924780] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 0.924935] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A [ 0.925492] 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 0.925720] 00:0a: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A [ 0.928723] brd: module loaded [ 0.930062] loop: module loaded [ 0.930340] input: Macintosh mouse button emulation as /devices/virtual/input/input2 [ 0.930952] sata_sil 0000:01:0b.0: version 2.4 [ 0.931225] ACPI: PCI Interrupt Link [APC3] enabled at IRQ 18 [ 0.931233] alloc irq_desc for 18 on node -1 [ 0.931236] alloc kstat_irqs on node -1 [ 0.931247] sata_sil 0000:01:0b.0: PCI INT A -> Link[APC3] -> GSI 18 (level, high) -> IRQ 18 [ 0.931361] scsi0 : sata_sil [ 0.931626] scsi1 : sata_sil [ 0.931764] ata1: SATA max UDMA/100 mmio m512@0xec004000 tf 0xec004080 irq 18 [ 0.931770] ata2: SATA max UDMA/100 mmio m512@0xec004000 tf 0xec0040c0 irq 18 [ 0.933131] pata_amd 0000:00:09.0: version 0.4.1 [ 0.933210] pata_amd 0000:00:09.0: setting latency timer to 64 [ 0.933305] scsi2 : pata_amd [ 0.933477] scsi3 : pata_amd [ 0.934471] ata3: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000 irq 14 [ 0.934476] ata4: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xf008 irq 15 [ 0.938477] Fixed MDIO Bus: probed [ 0.938706] PPP generic driver version 2.4.2 [ 0.939046] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.939446] ACPI: PCI Interrupt Link [APCL] enabled at IRQ 22 [ 0.939454] alloc irq_desc for 22 on node -1 [ 0.939457] alloc kstat_irqs on node -1 [ 0.939467] ehci_hcd 0000:00:02.2: PCI INT C -> Link[APCL] -> GSI 22 (level, high) -> IRQ 22 [ 0.939489] ehci_hcd 0000:00:02.2: setting latency timer to 64 [ 0.939494] ehci_hcd 0000:00:02.2: EHCI Host Controller [ 0.939645] ehci_hcd 0000:00:02.2: new USB bus registered, assigned bus number 1 [ 0.939688] ehci_hcd 0000:00:02.2: debug port 1 [ 0.939694] ehci_hcd 0000:00:02.2: cache line size of 64 is not supported [ 0.939718] ehci_hcd 0000:00:02.2: irq 22, io mem 0xed083000 [ 0.948010] ehci_hcd 0000:00:02.2: USB 2.0 started, EHCI 1.00 [ 0.948220] usb usb1: configuration #1 chosen from 1 choice [ 0.948316] hub 1-0:1.0: USB hub found [ 0.948332] hub 1-0:1.0: 6 ports detected [ 0.948471] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.948858] ACPI: PCI Interrupt Link [APCF] enabled at IRQ 21 [ 0.948866] alloc irq_desc for 21 on node -1 [ 0.948869] alloc kstat_irqs on node -1 [ 0.948878] ohci_hcd 0000:00:02.0: PCI INT A -> Link[APCF] -> GSI 21 (level, high) -> IRQ 21 [ 0.948899] ohci_hcd 0000:00:02.0: setting latency timer to 64 [ 0.948903] ohci_hcd 0000:00:02.0: OHCI Host Controller [ 0.949021] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2 [ 0.949061] ohci_hcd 0000:00:02.0: irq 21, io mem 0xed087000 [ 1.006124] usb usb2: configuration #1 chosen from 1 choice [ 1.006204] hub 2-0:1.0: USB hub found [ 1.006222] hub 2-0:1.0: 3 ports detected [ 1.006588] ACPI: PCI Interrupt Link [APCG] enabled at IRQ 20 [ 1.006594] alloc irq_desc for 20 on node -1 [ 1.006597] alloc kstat_irqs on node -1 [ 1.006607] ohci_hcd 0000:00:02.1: PCI INT B -> Link[APCG] -> GSI 20 (level, high) -> IRQ 20 [ 1.006624] ohci_hcd 0000:00:02.1: setting latency timer to 64 [ 1.006628] ohci_hcd 0000:00:02.1: OHCI Host Controller [ 1.006740] ohci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 3 [ 1.006776] ohci_hcd 0000:00:02.1: irq 20, io mem 0xed082000 [ 1.062124] usb usb3: configuration #1 chosen from 1 choice [ 1.062205] hub 3-0:1.0: USB hub found [ 1.062230] hub 3-0:1.0: 3 ports detected [ 1.062351] uhci_hcd: USB Universal Host Controller Interface driver [ 1.062619] PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1 [ 1.062623] PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp [ 1.063122] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.063414] mice: PS/2 mouse device common for all mice [ 1.063714] rtc_cmos 00:06: RTC can wake from S4 [ 1.063834] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0 [ 1.063864] rtc0: alarms up to one year, y3k, 242 bytes nvram [ 1.064086] device-mapper: uevent: version 1.0.3 [ 1.064293] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com [ 1.064358] device-mapper: multipath: version 1.1.0 loaded [ 1.064362] device-mapper: multipath round-robin: version 1.0.0 loaded [ 1.064662] EISA: Probing bus 0 at eisa.0 [ 1.064685] Cannot allocate resource for EISA slot 4 [ 1.064688] Cannot allocate resource for EISA slot 5 [ 1.064704] EISA: Detected 0 cards. [ 1.064781] cpuidle: using governor ladder [ 1.064784] cpuidle: using governor menu [ 1.065658] TCP cubic registered [ 1.066067] NET: Registered protocol family 10 [ 1.066605] lo: Disabled Privacy Extensions [ 1.066994] NET: Registered protocol family 17 [ 1.067091] Bluetooth: L2CAP ver 2.13 [ 1.067094] Bluetooth: L2CAP socket layer initialized [ 1.067098] Bluetooth: SCO (Voice Link) ver 0.6 [ 1.067101] Bluetooth: SCO socket layer initialized [ 1.067142] Bluetooth: RFCOMM TTY layer initialized [ 1.067147] Bluetooth: RFCOMM socket layer initialized [ 1.067149] Bluetooth: RFCOMM ver 1.11 [ 1.067154] powernow-k8: Processor cpuid 681 not supported [ 1.067177] Using IPI No-Shortcut mode [ 1.067454] PM: Resume from disk failed. [ 1.067475] registered taskstats version 1 [ 1.067647] Magic number: 9:905:135 [ 1.067680] block ram0: hash matches [ 1.067782] rtc_cmos 00:06: setting system clock to 2009-09-15 16:08:32 UTC (1253030912) [ 1.067787] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 1.067789] EDD information not available. [ 1.083274] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3 [ 1.096398] ata3.00: ATAPI: HL-DT-STDVD-RAM GH22NP20, 1.03, max UDMA/66 [ 1.096430] ata3: nv_mode_filter: 0x1f39f&0x701f->0x701f, BIOS=0x7000 (0xc0000000) ACPI=0x701f (60:600:0x13) [ 1.112337] ata3.00: configured for UDMA/33 [ 1.248039] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [ 1.256432] ata1.00: ATA-7: Maxtor 6Y120M0, YAR51HW0, max UDMA/133 [ 1.256436] ata1.00: 240121728 sectors, multi 0: LBA [ 1.272426] ata1.00: configured for UDMA/100 [ 1.272587] scsi 0:0:0:0: Direct-Access ATA Maxtor 6Y120M0 YAR5 PQ: 0 ANSI: 5 [ 1.272994] sd 0:0:0:0: [sda] 240121728 512-byte logical blocks: (122 GB/114 GiB) [ 1.273064] sd 0:0:0:0: [sda] Write Protect is off [ 1.273068] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.273103] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.273291] sda: [ 1.273565] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 1.306147] sda1 sda2 sda3 [ 1.306811] sd 0:0:0:0: [sda] Attached SCSI disk [ 1.436012] usb 3-2: new low speed USB device using ohci_hcd and address 2 [ 1.592027] ata2: SATA link down (SStatus 0 SControl 310) [ 1.593189] scsi 2:0:0:0: CD-ROM HL-DT-ST DVD-RAM GH22NP20 1.03 PQ: 0 ANSI: 5 [ 1.596724] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray [ 1.596730] Uniform CD-ROM driver Revision: 3.20 [ 1.596955] sr 2:0:0:0: Attached scsi CD-ROM sr0 [ 1.597128] sr 2:0:0:0: Attached scsi generic sg1 type 5 [ 1.651043] usb 3-2: configuration #1 chosen from 1 choice [ 1.763180] Freeing unused kernel memory: 544k freed [ 1.763860] Write protecting the kernel text: 4544k [ 1.763899] Write protecting the kernel read-only data: 1828k [ 1.895869] Linux agpgart interface v0.103 [ 1.930835] [drm] Initialized drm 1.1.0 20060810 [ 2.331738] agpgart: Detected NVIDIA nForce2 chipset [ 2.400337] agpgart-nvidia 0000:00:00.0: AGP aperture is 128M @ 0xe0000000 [ 2.430595] usbcore: registered new interface driver hiddev [ 2.437188] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.64. [ 2.437544] ACPI: PCI Interrupt Link [APCH] enabled at IRQ 22 [ 2.437552] forcedeth 0000:00:04.0: PCI INT A -> Link[APCH] -> GSI 22 (level, high) -> IRQ 22 [ 2.437559] forcedeth 0000:00:04.0: setting latency timer to 64 [ 2.437619] nv_probe: set workaround bit for reversed mac addr [ 2.438377] input: Logitech USB Laser Mouse as /devices/pci0000:00/0000:00:02.1/usb3/3-2/3-2:1.0/input/input4 [ 2.438487] generic-usb 0003:046D:C062.0001: input,hidraw0: USB HID v1.10 Mouse [Logitech USB Laser Mouse] on usb-0000:00:02.1-2/input0 [ 2.438520] usbcore: registered new interface driver usbhid [ 2.438525] usbhid: v2.6:USB HID core driver [ 2.612557] ACPI: PCI Interrupt Link [APC2] enabled at IRQ 17 [ 2.612567] alloc irq_desc for 17 on node -1 [ 2.612571] alloc kstat_irqs on node -1 [ 2.612581] skge 0000:01:04.0: PCI INT A -> Link[APC2] -> GSI 17 (level, high) -> IRQ 17 [ 2.612636] skge 1.13 addr 0xec000000 irq 17 chip Yukon-Lite rev 7 [ 2.613549] skge eth0: addr 00:11:2f:6e:27:19 [ 2.959798] forcedeth 0000:00:04.0: ifname eth1, PHY OUI 0x732 @ 1, addr 00:11:2f:6e:13:80 [ 2.959805] forcedeth 0000:00:04.0: timirq lnktim desc-v1 [ 2.960722] ACPI: PCI Interrupt Link [APCM] enabled at IRQ 21 [ 2.960731] ohci1394 0000:00:0d.0: PCI INT A -> Link[APCM] -> GSI 21 (level, high) -> IRQ 21 [ 2.960738] ohci1394 0000:00:0d.0: setting latency timer to 64 [ 3.018028] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[21] MMIO=[ed084000-ed0847ff] Max Packet=[2048] IR/IT contexts=[4/4] [ 3.225101] PM: Starting manual resume from disk [ 3.225108] PM: Resume from partition 8:1 [ 3.225110] PM: Checking hibernation image. [ 3.225327] PM: Resume from disk failed. [ 3.247511] EXT4-fs (sda2): barriers enabled [ 3.266069] kjournald2 starting: pid 1091, dev sda2:8, commit interval 5 seconds [ 3.266101] EXT4-fs (sda2): delayed allocation enabled [ 3.266106] EXT4-fs: file extents enabled [ 3.267111] EXT4-fs: mballoc enabled [ 3.267131] EXT4-fs (sda2): mounted filesystem with ordered data mode [ 4.129483] ohci1394: fw-host0: SelfID received outside of bus reset sequence [ 4.400164] ieee1394: Host added: ID:BUS[0-00:1023] GUID[00e0180000944a39] [ 6.002324] udev: starting version 146 [ 7.197497] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 7.220162] parport_pc 00:0b: reported by Plug and Play ACPI [ 7.220231] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,ECP,DMA] [ 7.546563] ppdev: user-space parallel port driver [ 7.547995] i2c-adapter i2c-0: nForce2 SMBus adapter at 0x5000 [ 7.548051] i2c-adapter i2c-1: nForce2 SMBus adapter at 0x5500 [ 7.697255] gameport: NS558 PnP Gameport is pnp00:0e/gameport0, io 0x201, speed 59659kHz [ 7.957250] fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel. [ 7.957258] Disabling lock debugging due to kernel taint [ 7.992325] [fglrx] Maximum main memory to use for locked dma buffers: 920 MBytes. [ 7.992435] [fglrx] vendor: 1002 device: 9505 count: 1 [ 7.992652] [fglrx] ioport: bar 1, base 0xc000, size: 0x100 [ 7.992875] ACPI: PCI Interrupt Link [APC4] enabled at IRQ 19 [ 7.992883] alloc irq_desc for 19 on node -1 [ 7.992886] alloc kstat_irqs on node -1 [ 7.992897] pci 0000:03:00.0: PCI INT A -> Link[APC4] -> GSI 19 (level, high) -> IRQ 19 [ 7.993155] [fglrx] Driver built-in PAT support is enabled successfully [ 7.993207] [fglrx] module loaded - fglrx 8.66.10 [Sep 3 2009] with 1 minors [ 8.434972] ACPI: PCI Interrupt Link [APCJ] enabled at IRQ 20 [ 8.434981] Intel ICH 0000:00:06.0: PCI INT A -> Link[APCJ] -> GSI 20 (level, high) -> IRQ 20 [ 8.435046] Intel ICH 0000:00:06.0: setting latency timer to 64 [ 8.756023] intel8x0_measure_ac97_clock: measured 52185 usecs (2536 samples) [ 8.756029] intel8x0: clocking to 47411 [ 9.183066] lp0: using parport0 (interrupt-driven). [ 9.892284] Adding 976552k swap on /dev/sda1. Priority:-1 extents:1 across:976552k [ 10.722443] EXT4-fs (sda2): internal journal on sda2:8 [ 11.963633] kjournald starting. Commit interval 5 seconds [ 11.964050] EXT3 FS on sda3, internal journal [ 11.964057] EXT3-fs: mounted filesystem with writeback data mode. [ 12.614139] type=1505 audit(1253030924.044:2): operation="profile_load" pid=1827 name=/usr/bin/evince [ 12.620072] type=1505 audit(1253030924.052:3): operation="profile_load" pid=1827 name=/usr/bin/evince-previewer [ 12.623411] type=1505 audit(1253030924.052:4): operation="profile_load" pid=1827 name=/usr/bin/evince-thumbnailer [ 12.678463] type=1505 audit(1253030924.108:5): operation="profile_load" pid=1828 name=/usr/lib/cups/backend/cups-pdf [ 12.678926] type=1505 audit(1253030924.108:6): operation="profile_load" pid=1828 name=/usr/sbin/cupsd [ 12.703265] type=1505 audit(1253030924.132:7): operation="profile_load" pid=1829 name=/usr/share/gdm/guest-session/Xsession [ 12.708834] type=1505 audit(1253030924.140:8): operation="profile_load" pid=1830 name=/usr/sbin/tcpdump [ 12.729301] type=1505 audit(1253030924.160:9): operation="profile_load" pid=1831 name=/sbin/dhclient3 [ 12.729658] type=1505 audit(1253030924.160:10): operation="profile_load" pid=1831 name=/usr/lib/NetworkManager/nm-dhcp-client.action [ 12.729868] type=1505 audit(1253030924.160:11): operation="profile_load" pid=1831 name=/usr/lib/connman/scripts/dhclient-script [ 26.326718] eth1: no link during initialization. [ 26.327238] ADDRCONF(NETDEV_UP): eth1: link is not ready [ 26.332894] skge eth0: enabling interface [ 26.336787] ADDRCONF(NETDEV_UP): eth0: link is not ready