Error: command ['sh', '-c', 'dmesg | comm -13 /var/log/dmesg -'] failed with exit code 1: [   86.368059] usb 5-1: new full speed USB device using uhci_hcd and address 6
[   86.492061] usb 5-1: device descriptor read/64, error -71
[   86.720059] usb 5-1: device descriptor read/64, error -71
[   86.936052] usb 5-1: new full speed USB device using uhci_hcd and address 7
[   87.060045] usb 5-1: device descriptor read/64, error -71
[   87.288066] usb 5-1: device descriptor read/64, error -71
[   87.504062] usb 5-1: new full speed USB device using uhci_hcd and address 8
[   87.920050] usb 5-1: device not accepting address 8, error -71
[   88.032055] usb 5-1: new full speed USB device using uhci_hcd and address 9
[   88.448034] usb 5-1: device not accepting address 9, error -71
[   88.448060] hub 5-0:1.0: unable to enumerate USB device on port 1
[   88.856559] i2c-adapter i2c-1: unable to read EDID block.
[   88.856565] i915 0000:00:02.0: LVDS-1: no EDID data
[   88.880546] i2c-adapter i2c-1: unable to read EDID block.
[   88.880552] i915 0000:00:02.0: LVDS-1: no EDID data
[   88.924556] i2c-adapter i2c-1: unable to read EDID block.
[   88.924561] i915 0000:00:02.0: LVDS-1: no EDID data
[   94.012558] i2c-adapter i2c-1: unable to read EDID block.
[   94.012564] i915 0000:00:02.0: LVDS-1: no EDID data
comm: file 2 is not in sorted order
[  136.741014] wlan0: authenticate with AP 00:16:38:6a:4d:95
[  136.742833] wlan0: authenticated
[  136.742838] wlan0: associate with AP 00:16:38:6a:4d:95
[  136.745309] wlan0: RX AssocResp from 00:16:38:6a:4d:95 (capab=0x411 status=0 aid=1)
[  136.745315] wlan0: associated
[  136.747126] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[  136.816536] padlock: VIA PadLock not detected.
[  146.913024] wlan0: no IPv6 routers present
[  161.509038] usb 2-1: new high speed USB device using ehci_hcd and address 9
[  161.642021] usb 2-1: configuration #1 chosen from 1 choice
[  161.642728] scsi7 : SCSI emulation for USB Mass Storage devices
[  161.642856] usb-storage: device found at 9
[  161.642860] usb-storage: waiting for device to settle before scanning
[  166.644215] usb-storage: device scan complete
[  166.644710] scsi 7:0:0:0: Direct-Access     WDC WD50 00BEVT-22ZAT0         PQ: 0 ANSI: 2 CCS
[  166.645246] sd 7:0:0:0: Attached scsi generic sg3 type 0
[  166.652419] sd 7:0:0:0: [sdc] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[  166.653192] sd 7:0:0:0: [sdc] Write Protect is off
[  166.653197] sd 7:0:0:0: [sdc] Mode Sense: 34 00 00 00
[  166.653201] sd 7:0:0:0: [sdc] Assuming drive cache: write through
[  166.654681] sd 7:0:0:0: [sdc] Assuming drive cache: write through
[  166.654689]  sdc: sdc1
[  166.689941] sd 7:0:0:0: [sdc] Assuming drive cache: write through
[  166.689948] sd 7:0:0:0: [sdc] Attached SCSI disk
[  166.868077] usb 2-1: reset high speed USB device using ehci_hcd and address 9
[  166.989467] usb 2-1: device descriptor read/64, error -71
[  167.220082] usb 2-1: device descriptor read/64, error -71
[  167.436084] usb 2-1: reset high speed USB device using ehci_hcd and address 9
[  167.557371] usb 2-1: device descriptor read/64, error -71
[  167.788076] usb 2-1: device descriptor read/64, error -71
[  168.004074] usb 2-1: reset high speed USB device using ehci_hcd and address 9
[  168.417037] usb 2-1: device not accepting address 9, error -71
[  168.529033] usb 2-1: reset high speed USB device using ehci_hcd and address 9
[  168.948058] usb 2-1: device not accepting address 9, error -71
[  168.948100] usb 2-1: USB disconnect, address 9
[  169.057040] usb 2-1: new high speed USB device using ehci_hcd and address 10
[  169.184080] usb 2-1: device descriptor read/64, error -71
[  169.412078] usb 2-1: device descriptor read/64, error -71
[  169.628076] usb 2-1: new high speed USB device using ehci_hcd and address 11
[  169.752088] usb 2-1: device descriptor read/64, error -71
[  169.980090] usb 2-1: device descriptor read/64, error -71
[  170.196091] usb 2-1: new high speed USB device using ehci_hcd and address 12
[  170.612065] usb 2-1: device not accepting address 12, error -71
[  170.724086] usb 2-1: new high speed USB device using ehci_hcd and address 13
[  171.140065] usb 2-1: device not accepting address 13, error -71
[  171.140094] hub 2-0:1.0: unable to enumerate USB device on port 1
[  171.408073] usb 5-1: new full speed USB device using uhci_hcd and address 10
[  171.532046] usb 5-1: device descriptor read/64, error -71
[  171.759705] usb 5-1: device descriptor read/64, error -71
[  172.032344] usb 5-1: new full speed USB device using uhci_hcd and address 11
[  172.212077] usb 5-1: device descriptor read/64, error -71
[  172.437057] usb 5-1: device descriptor read/64, error -71
[  172.653056] usb 5-1: new full speed USB device using uhci_hcd and address 12
[  173.061052] usb 5-1: device not accepting address 12, error -71
[  173.173042] usb 5-1: new full speed USB device using uhci_hcd and address 13
[  173.581030] usb 5-1: device not accepting address 13, error -71
[  173.581055] hub 5-0:1.0: unable to enumerate USB device on port 1
[  236.876084] usb 5-1: new full speed USB device using uhci_hcd and address 14
[  236.996085] usb 5-1: device descriptor read/64, error -71
[  237.221071] usb 5-1: device descriptor read/64, error -71
[  237.437064] usb 5-1: new full speed USB device using uhci_hcd and address 15
[  237.557065] usb 5-1: device descriptor read/64, error -71
[  237.836065] usb 5-1: device descriptor read/64, error -71
[  238.052065] usb 5-1: new full speed USB device using uhci_hcd and address 16
[  238.464047] usb 5-1: device not accepting address 16, error -71
[  238.576067] usb 5-1: new full speed USB device using uhci_hcd and address 17
[  238.984067] usb 5-1: device not accepting address 17, error -71
[  238.984088] hub 5-0:1.0: unable to enumerate USB device on port 1
[  358.944051] usb 5-1: new full speed USB device using uhci_hcd and address 18
[  359.068049] usb 5-1: device descriptor read/64, error -71
[  359.292084] usb 5-1: device descriptor read/64, error -71
[  359.508059] usb 5-1: new full speed USB device using uhci_hcd and address 19
[  359.629056] usb 5-1: device descriptor read/64, error -71
[  359.853064] usb 5-1: device descriptor read/64, error -71
[  360.068097] usb 5-1: new full speed USB device using uhci_hcd and address 20
[  360.476089] usb 5-1: device not accepting address 20, error -71
[  360.588097] usb 5-1: new full speed USB device using uhci_hcd and address 21
[  361.001074] usb 5-1: device not accepting address 21, error -71
[  361.001104] hub 5-0:1.0: unable to enumerate USB device on port 1
[  744.169067] usb 5-1: new full speed USB device using uhci_hcd and address 22
[  744.288069] usb 5-1: device descriptor read/64, error -71
[  744.568076] usb 5-1: device descriptor read/64, error -71
[  744.784093] usb 5-1: new full speed USB device using uhci_hcd and address 23
[  744.904075] usb 5-1: device descriptor read/64, error -71
[  745.184077] usb 5-1: device descriptor read/64, error -71
[  745.456066] usb 5-1: new full speed USB device using uhci_hcd and address 24
[  745.864075] usb 5-1: device not accepting address 24, error -71
[  746.032075] usb 5-1: new full speed USB device using uhci_hcd and address 25
[  746.444119] usb 5-1: device not accepting address 25, error -71
[  746.444147] hub 5-0:1.0: unable to enumerate USB device on port 1
[  747.917011] hda-intel: azx_get_response timeout, switching to polling mode: last cmd=0x01570900
[  817.932068] usb 2-2: new high speed USB device using ehci_hcd and address 14
[  818.130167] usb 2-2: configuration #1 chosen from 1 choice
[  818.141777] scsi8 : SCSI emulation for USB Mass Storage devices
[  818.149528] usb-storage: device found at 14
[  818.149532] usb-storage: waiting for device to settle before scanning
[  818.333051] usb 5-1: new full speed USB device using uhci_hcd and address 26
[  818.453053] usb 5-1: device descriptor read/64, error -71
[  818.676087] usb 5-1: device descriptor read/64, error -71
[  818.893108] usb 5-1: new full speed USB device using uhci_hcd and address 27
[  819.016062] usb 5-1: device descriptor read/64, error -71
[  819.241062] usb 5-1: device descriptor read/64, error -71
[  819.456060] usb 5-1: new full speed USB device using uhci_hcd and address 28
[  819.864081] usb 5-1: device not accepting address 28, error -71
[  820.032071] usb 5-1: new full speed USB device using uhci_hcd and address 29
[  820.444071] usb 5-1: device not accepting address 29, error -71
[  820.444100] hub 5-0:1.0: unable to enumerate USB device on port 1
[  822.522568] usb 2-2: USB disconnect, address 14
[  822.792255] usb 2-2: new high speed USB device using ehci_hcd and address 15
[  822.925170] usb 2-2: configuration #1 chosen from 1 choice
[  822.929110] scsi9 : SCSI emulation for USB Mass Storage devices
[  822.935333] usb-storage: device found at 15
[  822.935338] usb-storage: waiting for device to settle before scanning
[  827.932235] usb-storage: device scan complete
[  827.967203] scsi 9:0:0:0: Direct-Access     TOSHIBA  MK3021GAS        GA12 PQ: 0 ANSI: 0 CCS
[  827.968594] sd 9:0:0:0: Attached scsi generic sg3 type 0
[  827.970148] sd 9:0:0:0: [sdc] 58605120 512-byte logical blocks: (30.0 GB/27.9 GiB)
[  827.970633] sd 9:0:0:0: [sdc] Write Protect is off
[  827.970637] sd 9:0:0:0: [sdc] Mode Sense: 00 14 00 00
[  827.970641] sd 9:0:0:0: [sdc] Assuming drive cache: write through
[  827.971960] sd 9:0:0:0: [sdc] Assuming drive cache: write through
[  827.971967]  sdc: sdc1
[  827.989287] sd 9:0:0:0: [sdc] Assuming drive cache: write through
[  827.989296] sd 9:0:0:0: [sdc] Attached SCSI disk
[  842.816090] usb 5-1: new full speed USB device using uhci_hcd and address 30
[  842.936069] usb 5-1: device descriptor read/64, error -71
[  843.164120] usb 5-1: device descriptor read/64, error -71
[  843.380079] usb 5-1: new full speed USB device using uhci_hcd and address 31
[  843.500061] usb 5-1: device descriptor read/64, error -71
[  843.724955] usb 5-1: device descriptor read/64, error -71
[  844.000088] usb 5-1: new full speed USB device using uhci_hcd and address 32
[  844.416080] usb 5-1: device not accepting address 32, error -71
[  844.584076] usb 5-1: new full speed USB device using uhci_hcd and address 33
[  844.996082] usb 5-1: device not accepting address 33, error -71
[  844.996109] hub 5-0:1.0: unable to enumerate USB device on port 1
[  869.336091] usb 2-1: new high speed USB device using ehci_hcd and address 16
[  869.469188] usb 2-1: configuration #1 chosen from 1 choice
[  869.482711] scsi10 : SCSI emulation for USB Mass Storage devices
[  869.485632] usb-storage: device found at 16
[  869.485636] usb-storage: waiting for device to settle before scanning
[  874.487327] usb-storage: device scan complete
[  874.488093] scsi 10:0:0:0: Direct-Access     WDC WD50 00BEVT-22ZAT0         PQ: 0 ANSI: 2 CCS
[  874.488863] sd 10:0:0:0: Attached scsi generic sg4 type 0
[  874.497525] sd 10:0:0:0: [sdd] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[  874.498267] sd 10:0:0:0: [sdd] Write Protect is off
[  874.498271] sd 10:0:0:0: [sdd] Mode Sense: 34 00 00 00
[  874.498274] sd 10:0:0:0: [sdd] Assuming drive cache: write through
[  874.499776] sd 10:0:0:0: [sdd] Assuming drive cache: write through
[  874.499781]  sdd: sdd1
[  874.530270] sd 10:0:0:0: [sdd] Assuming drive cache: write through
[  874.530280] sd 10:0:0:0: [sdd] Attached SCSI disk
[  874.708090] usb 2-1: reset high speed USB device using ehci_hcd and address 16
[  874.832095] usb 2-1: device descriptor read/64, error -71
[  875.060109] usb 2-1: device descriptor read/64, error -71
[  875.276076] usb 2-1: reset high speed USB device using ehci_hcd and address 16
[  875.401138] usb 2-1: device descriptor read/64, error -71
[  875.628110] usb 2-1: device descriptor read/64, error -71
[  875.844098] usb 2-1: reset high speed USB device using ehci_hcd and address 16
[  876.261047] usb 2-1: device not accepting address 16, error -71
[  876.372078] usb 2-1: reset high speed USB device using ehci_hcd and address 16
[  876.788095] usb 2-1: device not accepting address 16, error -71
[  876.788165] usb 2-1: USB disconnect, address 16
[  876.905069] usb 2-1: new high speed USB device using ehci_hcd and address 17
[  877.028076] usb 2-1: device descriptor read/64, error -71
[  877.256064] usb 2-1: device descriptor read/64, error -71
[  877.472059] usb 2-1: new high speed USB device using ehci_hcd and address 18
[  877.596083] usb 2-1: device descriptor read/64, error -71
[  877.824060] usb 2-1: device descriptor read/64, error -71
[  878.044113] usb 2-1: new high speed USB device using ehci_hcd and address 19
[  878.460255] usb 2-1: device not accepting address 19, error -71
[  878.572110] usb 2-1: new high speed USB device using ehci_hcd and address 20
[  878.984072] usb 2-1: device not accepting address 20, error -71
[  878.984102] hub 2-0:1.0: unable to enumerate USB device on port 1
[  879.252079] usb 5-1: new full speed USB device using uhci_hcd and address 34
[  879.372068] usb 5-1: device descriptor read/64, error -71
[  879.596062] usb 5-1: device descriptor read/64, error -71
[  879.812063] usb 5-1: new full speed USB device using uhci_hcd and address 35
[  879.988066] usb 5-1: device descriptor read/64, error -71
[  880.216052] usb 5-1: device descriptor read/64, error -71
[  880.432064] usb 5-1: new full speed USB device using uhci_hcd and address 36
[  880.844061] usb 5-1: device not accepting address 36, error -71
[  880.956085] usb 5-1: new full speed USB device using uhci_hcd and address 37
[  881.368042] usb 5-1: device not accepting address 37, error -71
[  881.368064] hub 5-0:1.0: unable to enumerate USB device on port 1
[ 1067.996084] usb 5-1: new full speed USB device using uhci_hcd and address 38
[ 1068.116072] usb 5-1: device descriptor read/64, error -71
[ 1068.340078] usb 5-1: device descriptor read/64, error -71
[ 1068.556091] usb 5-1: new full speed USB device using uhci_hcd and address 39
[ 1068.732058] usb 5-1: device descriptor read/64, error -71
[ 1068.956065] usb 5-1: device descriptor read/64, error -71
[ 1069.172070] usb 5-1: new full speed USB device using uhci_hcd and address 40
[ 1069.588052] usb 5-1: device not accepting address 40, error -71
[ 1069.700147] usb 5-1: new full speed USB device using uhci_hcd and address 41
[ 1070.112064] usb 5-1: device not accepting address 41, error -71
[ 1070.112092] hub 5-0:1.0: unable to enumerate USB device on port 1