/dev/sda: ATA device, with non-removable media Model Number: Maxtor 92732U8 Serial Number: H804FLPC Firmware Revision: RA530JN0 Standards: Used: ATA/ATAPI-4 T13 1153D revision 17 Supported: 5 4 3 & some of 5 Configuration: Logical max current cylinders 16383 16383 heads 16 16 sectors/track 63 63 -- CHS current addressable sectors: 16514064 LBA user addressable sectors: 53369568 Logical/Physical Sector size: 512 bytes device size with M = 1024*1024: 26059 MBytes device size with M = 1000*1000: 27325 MBytes (27 GB) cache/buffer size = 2048 KBytes (type=DualPortCache) Capabilities: LBA, IORDY(can be disabled) bytes avail on r/w long: 57 Standby timer values: spec'd by Standard, no device specific minimum R/W multiple sector transfer: Max = 16 Current = 16 Advanced power management level: disabled DMA: mdma0 mdma1 mdma2 udma0 udma1 *udma2 udma3 udma4 Cycle time: min=120ns recommended=120ns PIO: pio0 pio1 pio2 pio3 pio4 Cycle time: no flow control=120ns IORDY flow control=120ns Commands/features: Enabled Supported: * SMART feature set * Power Management feature set * Write cache * Look-ahead * Host Protected Area feature set * WRITE_VERIFY command * WRITE_BUFFER command * READ_BUFFER command * NOP cmd * DOWNLOAD_MICROCODE Advanced Power Management feature set HW reset results: CBLID- above Vih Device num = 0 determined by the jumper Checksum: correct