[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.31-6-generic (buildd@yellow) (gcc version 4.4.1 (Ubuntu 4.4.1-1ubuntu3) ) #25-Ubuntu SMP Fri Aug 14 16:28:28 UTC 2009 (Ubuntu 2.6.31-6.25-generic) [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-2.6.31-6-generic root=UUID=322d85e3-e51c-45a4-b723-81eb5b2a5475 ro quiet splash [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Centaur CentaurHauls [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f000 (usable) [ 0.000000] BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000007bef0000 (usable) [ 0.000000] BIOS-e820: 000000007bef0000 - 000000007bef3000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000007bef3000 - 000000007bf00000 (ACPI data) [ 0.000000] BIOS-e820: 000000007c000000 - 0000000080000000 (reserved) [ 0.000000] BIOS-e820: 00000000f0000000 - 00000000f4000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved) [ 0.000000] DMI present. [ 0.000000] Phoenix BIOS detected: BIOS may corrupt low RAM, working around it. [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) [ 0.000000] last_pfn = 0x7bef0 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-C7FFF write-protect [ 0.000000] C8000-FFFFF uncachable [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 0000000000 mask FF80000000 write-back [ 0.000000] 1 base 007C000000 mask FFFC000000 uncachable [ 0.000000] 2 base 007BF00000 mask FFFFF00000 uncachable [ 0.000000] 3 disabled [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] Scanning 0 areas for low memory corruption [ 0.000000] modified physical RAM map: [ 0.000000] modified: 0000000000000000 - 0000000000010000 (reserved) [ 0.000000] modified: 0000000000010000 - 000000000009f000 (usable) [ 0.000000] modified: 000000000009f000 - 00000000000a0000 (reserved) [ 0.000000] modified: 00000000000f0000 - 0000000000100000 (reserved) [ 0.000000] modified: 0000000000100000 - 000000007bef0000 (usable) [ 0.000000] modified: 000000007bef0000 - 000000007bef3000 (ACPI NVS) [ 0.000000] modified: 000000007bef3000 - 000000007bf00000 (ACPI data) [ 0.000000] modified: 000000007c000000 - 0000000080000000 (reserved) [ 0.000000] modified: 00000000f0000000 - 00000000f4000000 (reserved) [ 0.000000] modified: 00000000fec00000 - 0000000100000000 (reserved) [ 0.000000] initial memory mapped : 0 - 20000000 [ 0.000000] init_memory_mapping: 0000000000000000-000000007bef0000 [ 0.000000] Using x86 segment limits to approximate NX protection [ 0.000000] 0000000000 - 007be00000 page 2M [ 0.000000] 007be00000 - 007bef0000 page 4k [ 0.000000] kernel direct mapping tables up to 7bef0000 @ 10000-14000 [ 0.000000] RAMDISK: 377dd000 - 37fef25e [ 0.000000] ACPI: RSDP 00000000000f7440 00024 (v02 HP-CPC) [ 0.000000] ACPI: XSDT 000000007bef30c0 0004C (v01 HP-CPC ASUSACPI 42302E31 AWRD 00000000) [ 0.000000] ACPI: FACP 000000007bef90c0 000F4 (v03 HP-CPC ASUSACPI 42302E31 AWRD 00000000) [ 0.000000] ACPI: DSDT 000000007bef3280 05DF3 (v01 HP-CPC ASUSACPI 00001000 MSFT 03000000) [ 0.000000] ACPI: FACS 000000007bef0000 00040 [ 0.000000] ACPI: SSDT 000000007bef92c0 001C4 (v01 HP-CPC POWERNOW 00000001 LTP 00000001) [ 0.000000] ACPI: HPET 000000007bef9500 00038 (v01 HP-CPC ASUSACPI 42302E31 AWRD 00000098) [ 0.000000] ACPI: MCFG 000000007bef9580 0003C (v01 HP-CPC ASUSACPI 42302E31 AWRD 00000000) [ 0.000000] ACPI: APIC 000000007bef9200 0007C (v01 HP-CPC ASUSACPI 42302E31 AWRD 00000000) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] Scanning NUMA topology in Northbridge 24 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at 0000000000000000-000000007bef0000 [ 0.000000] Bootmem setup node 0 0000000000000000-000000007bef0000 [ 0.000000] NODE_DATA [0000000000012000 - 0000000000016fff] [ 0.000000] bootmap [0000000000017000 - 00000000000267df] pages 10 [ 0.000000] (7 early reservations) ==> bootmem [0000000000 - 007bef0000] [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] [ 0.000000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000] [ 0.000000] #2 [0001000000 - 00019b49cc] TEXT DATA BSS ==> [0001000000 - 00019b49cc] [ 0.000000] #3 [00377dd000 - 0037fef25e] RAMDISK ==> [00377dd000 - 0037fef25e] [ 0.000000] #4 [000009f000 - 0000100000] BIOS reserved ==> [000009f000 - 0000100000] [ 0.000000] #5 [00019b5000 - 00019b50e6] BRK ==> [00019b5000 - 00019b50e6] [ 0.000000] #6 [0000010000 - 0000012000] PGTABLE ==> [0000010000 - 0000012000] [ 0.000000] found SMP MP-table at [ffff8800000f5860] f5860 [ 0.000000] [ffffea0000000000-ffffea0001bfffff] PMD -> [ffff880001e00000-ffff8800039fffff] on node 0 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000010 -> 0x00001000 [ 0.000000] DMA32 0x00001000 -> 0x00100000 [ 0.000000] Normal 0x00100000 -> 0x00100000 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[2] active PFN ranges [ 0.000000] 0: 0x00000010 -> 0x0000009f [ 0.000000] 0: 0x00000100 -> 0x0007bef0 [ 0.000000] On node 0 totalpages: 507519 [ 0.000000] DMA zone: 56 pages used for memmap [ 0.000000] DMA zone: 102 pages reserved [ 0.000000] DMA zone: 3825 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 6885 pages used for memmap [ 0.000000] DMA32 zone: 496651 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0x4008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] ACPI: IRQ14 used by override. [ 0.000000] ACPI: IRQ15 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x10de8201 base: 0xfefff000 [ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs [ 0.000000] nr_irqs_gsi: 24 [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000 [ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000 [ 0.000000] Allocating PCI resources starting at 80000000 (gap: 80000000:70000000) [ 0.000000] NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:2 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 29 pages at ffff8800019c6000, static data 89952 bytes [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 500476 [ 0.000000] Policy zone: DMA32 [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.31-6-generic root=UUID=322d85e3-e51c-45a4-b723-81eb5b2a5475 ro quiet splash [ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes) [ 0.000000] Initializing CPU#0 [ 0.000000] Checking aperture... [ 0.000000] No AGP bridge found [ 0.000000] Node 0: aperture @ 28aa000000 size 32 MB [ 0.000000] Aperture beyond 4GB. Ignoring. [ 0.000000] Memory: 1982804k/2030528k available (5285k kernel code, 452k absent, 47272k reserved, 2980k data, 656k init) [ 0.000000] SLUB: Genslabs=14, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 [ 0.000000] NR_IRQS:4352 nr_irqs:424 [ 0.000000] Extended CMOS year: 2000 [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 2004.485 MHz processor. [ 0.000012] spurious 8259A interrupt: IRQ7. [ 0.002819] Console: colour VGA+ 80x25 [ 0.002822] console [tty0] enabled [ 0.004000] allocated 20971520 bytes of page_cgroup [ 0.004000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.004000] hpet clockevent registered [ 0.004000] HPET: 3 timers in total, 0 timers will be used for per-cpu timer [ 0.004000] Calibrating delay loop (skipped), value calculated using timer frequency.. 4008.97 BogoMIPS (lpj=8017940) [ 0.004000] Security Framework initialized [ 0.004000] AppArmor: AppArmor initialized [ 0.004000] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.004000] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.004000] Mount-cache hash table entries: 256 [ 0.004000] Initializing cgroup subsys ns [ 0.004000] Initializing cgroup subsys cpuacct [ 0.004000] Initializing cgroup subsys memory [ 0.004000] Initializing cgroup subsys freezer [ 0.004000] Initializing cgroup subsys net_cls [ 0.004000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 0.004000] CPU: L2 Cache: 512K (64 bytes/line) [ 0.004000] CPU 0/0x0 -> Node 0 [ 0.004000] tseg: 007bf00000 [ 0.004000] CPU: Physical Processor ID: 0 [ 0.004000] CPU: Processor Core ID: 0 [ 0.004000] using C1E aware idle routine [ 0.004000] Performance Counters: AMD PMU driver. [ 0.004000] ... version: 0 [ 0.004000] ... bit width: 48 [ 0.004000] ... generic counters: 4 [ 0.004000] ... value mask: 0000ffffffffffff [ 0.004000] ... max period: 00007fffffffffff [ 0.004000] ... fixed-purpose counters: 0 [ 0.004000] ... counter mask: 000000000000000f [ 0.004000] ACPI: Core revision 20090521 [ 0.013599] Setting APIC routing to flat [ 0.014094] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.053800] CPU0: AMD Athlon(tm) 64 X2 Dual Core Processor 3800+ stepping 02 [ 0.056001] Booting processor 1 APIC 0x1 ip 0x6000 [ 0.004000] Initializing CPU#1 [ 0.004000] Calibrating delay using timer specific routine.. 4008.42 BogoMIPS (lpj=8016856) [ 0.004000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 0.004000] CPU: L2 Cache: 512K (64 bytes/line) [ 0.004000] CPU 1/0x1 -> Node 0 [ 0.004000] CPU: Physical Processor ID: 0 [ 0.004000] CPU: Processor Core ID: 1 [ 0.140186] CPU1: AMD Athlon(tm) 64 X2 Dual Core Processor 3800+ stepping 02 [ 0.140200] Brought up 2 CPUs [ 0.140202] Total of 2 processors activated (8017.39 BogoMIPS). [ 0.140304] CPU0 attaching sched-domain: [ 0.140308] domain 0: span 0-1 level MC [ 0.140311] groups: 0 1 [ 0.140316] CPU1 attaching sched-domain: [ 0.140318] domain 0: span 0-1 level MC [ 0.140320] groups: 1 0 [ 0.140391] Booting paravirtualized kernel on bare hardware [ 0.140391] regulator: core version 0.5 [ 0.140391] Time: 19:08:36 Date: 08/26/09 [ 0.140391] NET: Registered protocol family 16 [ 0.140391] node 0 link 0: io port [1000, ffff] [ 0.140391] TOM: 0000000080000000 aka 2048M [ 0.140391] node 0 link 0: mmio [a0000, bffff] [ 0.140391] node 0 link 0: mmio [80000000, efffffff] [ 0.140391] node 0 link 0: mmio [f4000000, fe02ffff] [ 0.140391] node 0 link 0: mmio [f0000000, f02fffff] [ 0.140391] bus: [00,02] on node 0 link 0 [ 0.140391] bus: 00 index 0 io port: [0, ffff] [ 0.140391] bus: 00 index 1 mmio: [a0000, bffff] [ 0.140391] bus: 00 index 2 mmio: [80000000, f3ffffff] [ 0.140391] bus: 00 index 3 mmio: [f4000000, fcffffffff] [ 0.140391] ACPI: bus type pci registered [ 0.140391] PCI: MCFG configuration 0: base f0000000 segment 0 buses 0 - 63 [ 0.140391] PCI: MCFG area at f0000000 reserved in E820 [ 0.140840] PCI: Using MMCONFIG at f0000000 - f3ffffff [ 0.140842] PCI: Using configuration type 1 for base access [ 0.144081] bio: create slab at 0 [ 0.148506] ACPI: EC: Look up EC in DSDT [ 0.156580] ACPI: Interpreter enabled [ 0.156584] ACPI: (supports S0 S1 S3 S4 S5) [ 0.156614] ACPI: Using IOAPIC for interrupt routing [ 0.164297] ACPI: No dock devices found. [ 0.168688] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 0.168727] pci 0000:00:04.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.168727] pci 0000:00:04.0: PME# disabled [ 0.168727] pci 0000:00:05.0: reg 10 32bit mmio: [0xfb000000-0xfbffffff] [ 0.168727] pci 0000:00:05.0: reg 14 64bit mmio: [0xe0000000-0xefffffff] [ 0.168727] pci 0000:00:05.0: reg 1c 64bit mmio: [0xfc000000-0xfcffffff] [ 0.168727] pci 0000:00:05.0: reg 30 32bit mmio: [0x000000-0x01ffff] [ 0.168727] pci 0000:00:0a.1: reg 20 io port: [0x4c00-0x4c3f] [ 0.168727] pci 0000:00:0a.1: reg 24 io port: [0x4c40-0x4c7f] [ 0.168727] pci 0000:00:0a.1: PME# supported from D3hot D3cold [ 0.168727] pci 0000:00:0a.1: PME# disabled [ 0.168727] pci 0000:00:0b.0: reg 10 32bit mmio: [0xfe02f000-0xfe02ffff] [ 0.168727] pci 0000:00:0b.0: supports D1 D2 [ 0.168727] pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.168727] pci 0000:00:0b.0: PME# disabled [ 0.168727] pci 0000:00:0b.1: reg 10 32bit mmio: [0xfe02e000-0xfe02e0ff] [ 0.168727] pci 0000:00:0b.1: supports D1 D2 [ 0.168727] pci 0000:00:0b.1: PME# supported from D0 D1 D2 D3hot D3cold [ 0.168727] pci 0000:00:0b.1: PME# disabled [ 0.168727] pci 0000:00:0d.0: reg 20 io port: [0xf400-0xf40f] [ 0.168747] pci 0000:00:0e.0: reg 10 io port: [0x9f0-0x9f7] [ 0.168752] pci 0000:00:0e.0: reg 14 io port: [0xbf0-0xbf3] [ 0.168756] pci 0000:00:0e.0: reg 18 io port: [0x970-0x977] [ 0.168761] pci 0000:00:0e.0: reg 1c io port: [0xb70-0xb73] [ 0.168766] pci 0000:00:0e.0: reg 20 io port: [0xe000-0xe00f] [ 0.168771] pci 0000:00:0e.0: reg 24 32bit mmio: [0xfe02d000-0xfe02dfff] [ 0.168848] pci 0000:00:10.1: reg 10 32bit mmio: [0xfe028000-0xfe02bfff] [ 0.168878] pci 0000:00:10.1: PME# supported from D3hot D3cold [ 0.168882] pci 0000:00:10.1: PME# disabled [ 0.168912] pci 0000:00:14.0: reg 10 32bit mmio: [0xfe02c000-0xfe02cfff] [ 0.168917] pci 0000:00:14.0: reg 14 io port: [0xdc00-0xdc07] [ 0.168938] pci 0000:00:14.0: supports D1 D2 [ 0.168940] pci 0000:00:14.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.168944] pci 0000:00:14.0: PME# disabled [ 0.169055] pci 0000:00:04.0: bridge io port: [0xb000-0xbfff] [ 0.169058] pci 0000:00:04.0: bridge 32bit mmio: [0xfdd00000-0xfddfffff] [ 0.169062] pci 0000:00:04.0: bridge 64bit mmio pref: [0xfdc00000-0xfdcfffff] [ 0.169094] pci 0000:02:05.0: reg 10 32bit mmio: [0xfdbff000-0xfdbfffff] [ 0.169128] pci 0000:02:05.0: supports D1 D2 [ 0.169130] pci 0000:02:05.0: PME# supported from D0 D1 D2 D3hot [ 0.169134] pci 0000:02:05.0: PME# disabled [ 0.169164] pci 0000:00:10.0: transparent bridge [ 0.169168] pci 0000:00:10.0: bridge io port: [0xc000-0xcfff] [ 0.169171] pci 0000:00:10.0: bridge 32bit mmio: [0xfdb00000-0xfdbfffff] [ 0.169175] pci 0000:00:10.0: bridge 32bit mmio pref: [0xfde00000-0xfdefffff] [ 0.169186] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.169450] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT] [ 0.246238] ACPI: PCI Interrupt Link [LNK1] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.246238] ACPI: PCI Interrupt Link [LNK2] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.246238] ACPI: PCI Interrupt Link [LNK3] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.246238] ACPI: PCI Interrupt Link [LNK4] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.246238] ACPI: PCI Interrupt Link [LNK5] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.246238] ACPI: PCI Interrupt Link [LNK6] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.246238] ACPI: PCI Interrupt Link [LNK7] (IRQs 5 7 9 *10 11 14 15) [ 0.246238] ACPI: PCI Interrupt Link [LNK8] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.246238] ACPI: PCI Interrupt Link [LUBA] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.248174] ACPI: PCI Interrupt Link [LUBB] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.248348] ACPI: PCI Interrupt Link [LMAC] (IRQs *5 7 9 10 11 14 15) [ 0.248518] ACPI: PCI Interrupt Link [LACI] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.248691] ACPI: PCI Interrupt Link [LAZA] (IRQs 5 *7 9 10 11 14 15) [ 0.248861] ACPI: PCI Interrupt Link [LPMU] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.249032] ACPI: PCI Interrupt Link [LMCI] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.249203] ACPI: PCI Interrupt Link [LSMB] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.249374] ACPI: PCI Interrupt Link [LUB2] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.249546] ACPI: PCI Interrupt Link [LIDE] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.249720] ACPI: PCI Interrupt Link [LSID] (IRQs 5 7 9 10 *11 14 15) [ 0.249950] ACPI: PCI Interrupt Link [APC1] (IRQs 16) *0, disabled. [ 0.250176] ACPI: PCI Interrupt Link [APC2] (IRQs 17) *0, disabled. [ 0.250400] ACPI: PCI Interrupt Link [APC3] (IRQs 18) *0, disabled. [ 0.250624] ACPI: PCI Interrupt Link [APC4] (IRQs 19) *0, disabled. [ 0.250848] ACPI: PCI Interrupt Link [APC5] (IRQs 16) *0, disabled. [ 0.251071] ACPI: PCI Interrupt Link [APC6] (IRQs 16) *0, disabled. [ 0.251296] ACPI: PCI Interrupt Link [APC7] (IRQs 16) *0 [ 0.251520] ACPI: PCI Interrupt Link [APC8] (IRQs 16) *0, disabled. [ 0.251746] ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22 23) *0, disabled. [ 0.251976] ACPI: PCI Interrupt Link [APCG] (IRQs 20 21 22 23) *0, disabled. [ 0.252213] ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22 23) *0 [ 0.252438] ACPI: PCI Interrupt Link [APCJ] (IRQs 20 21 22 23) *0, disabled. [ 0.252664] ACPI: PCI Interrupt Link [APMU] (IRQs 20 21 22 23) *0, disabled. [ 0.252889] ACPI: PCI Interrupt Link [AAZA] (IRQs 20 21 22 23) *0 [ 0.253115] ACPI: PCI Interrupt Link [APCK] (IRQs 20 21 22 23) *0, disabled. [ 0.253339] ACPI: PCI Interrupt Link [APCS] (IRQs 20 21 22 23) *0, disabled. [ 0.253565] ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22 23) *0, disabled. [ 0.253790] ACPI: PCI Interrupt Link [APCM] (IRQs 20 21 22 23) *0, disabled. [ 0.254015] ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22 23) *0, disabled. [ 0.254241] ACPI: PCI Interrupt Link [APSI] (IRQs 20 21 22 23) *0 [ 0.254303] SCSI subsystem initialized [ 0.254303] libata version 3.00 loaded. [ 0.254303] usbcore: registered new interface driver usbfs [ 0.254303] usbcore: registered new interface driver hub [ 0.254303] usbcore: registered new device driver usb [ 0.254303] ACPI: WMI: Mapper loaded [ 0.254303] PCI: Using ACPI for IRQ routing [ 0.268010] Bluetooth: Core ver 2.15 [ 0.268035] NET: Registered protocol family 31 [ 0.268037] Bluetooth: HCI device and connection manager initialized [ 0.268041] Bluetooth: HCI socket layer initialized [ 0.268043] NetLabel: Initializing [ 0.268045] NetLabel: domain hash size = 128 [ 0.268046] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.268062] NetLabel: unlabeled traffic allowed by default [ 0.268110] hpet0: at MMIO 0xfefff000, IRQs 2, 8, 31 [ 0.268115] hpet0: 3 comparators, 32-bit 25.000000 MHz counter [ 0.276022] Switched to high resolution mode on CPU 0 [ 0.276132] Switched to high resolution mode on CPU 1 [ 0.292020] pnp: PnP ACPI init [ 0.292040] ACPI: bus type pnp registered [ 0.297167] pnp: PnP ACPI: found 10 devices [ 0.297170] ACPI: ACPI bus type pnp unregistered [ 0.297182] system 00:01: ioport range 0x4000-0x407f has been reserved [ 0.297185] system 00:01: ioport range 0x4080-0x40ff has been reserved [ 0.297189] system 00:01: ioport range 0x4400-0x447f has been reserved [ 0.297192] system 00:01: ioport range 0x4480-0x44ff has been reserved [ 0.297196] system 00:01: ioport range 0x4800-0x487f has been reserved [ 0.297199] system 00:01: ioport range 0x4880-0x48ff has been reserved [ 0.297202] system 00:01: ioport range 0x2000-0x207f has been reserved [ 0.297206] system 00:01: ioport range 0x2080-0x20ff has been reserved [ 0.297210] system 00:01: iomem range 0x7c000000-0x7fffffff has been reserved [ 0.297216] system 00:02: ioport range 0x4d0-0x4d1 has been reserved [ 0.297220] system 00:02: ioport range 0x290-0x29f has been reserved [ 0.297227] system 00:08: iomem range 0xf0000000-0xf3ffffff has been reserved [ 0.297233] system 00:09: iomem range 0xf0000-0xf3fff could not be reserved [ 0.297236] system 00:09: iomem range 0xf4000-0xf7fff could not be reserved [ 0.297239] system 00:09: iomem range 0xf8000-0xfbfff could not be reserved [ 0.297243] system 00:09: iomem range 0xfc000-0xfffff could not be reserved [ 0.297246] system 00:09: iomem range 0xfefff000-0xfefff0ff has been reserved [ 0.297250] system 00:09: iomem range 0x7bef0000-0x7befffff could not be reserved [ 0.297253] system 00:09: iomem range 0xffff0000-0xffffffff has been reserved [ 0.297257] system 00:09: iomem range 0x0-0x9ffff could not be reserved [ 0.297260] system 00:09: iomem range 0x100000-0x7beeffff could not be reserved [ 0.297263] system 00:09: iomem range 0x7bf00000-0x7fefffff could not be reserved [ 0.297267] system 00:09: iomem range 0xfec00000-0xfec00fff could not be reserved [ 0.297270] system 00:09: iomem range 0xfee00000-0xfeefffff has been reserved [ 0.297274] system 00:09: iomem range 0xfefff000-0xfeffffff could not be reserved [ 0.297277] system 00:09: iomem range 0xfff80000-0xfff80fff has been reserved [ 0.297281] system 00:09: iomem range 0xfff90000-0xfffbffff has been reserved [ 0.297284] system 00:09: iomem range 0xfffed000-0xfffeffff has been reserved [ 0.302405] AppArmor: AppArmor Filesystem Enabled [ 0.302440] pci 0000:00:04.0: PCI bridge, secondary bus 0000:01 [ 0.302443] pci 0000:00:04.0: IO window: 0xb000-0xbfff [ 0.302446] pci 0000:00:04.0: MEM window: 0xfdd00000-0xfddfffff [ 0.302450] pci 0000:00:04.0: PREFETCH window: 0x000000fdc00000-0x000000fdcfffff [ 0.302454] pci 0000:00:10.0: PCI bridge, secondary bus 0000:02 [ 0.302457] pci 0000:00:10.0: IO window: 0xc000-0xcfff [ 0.302461] pci 0000:00:10.0: MEM window: 0xfdb00000-0xfdbfffff [ 0.302465] pci 0000:00:10.0: PREFETCH window: 0xfde00000-0xfdefffff [ 0.302474] pci 0000:00:04.0: setting latency timer to 64 [ 0.302479] pci 0000:00:10.0: setting latency timer to 64 [ 0.302484] pci_bus 0000:00: resource 0 io: [0x00-0xffff] [ 0.302487] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff] [ 0.302490] pci_bus 0000:01: resource 0 io: [0xb000-0xbfff] [ 0.302493] pci_bus 0000:01: resource 1 mem: [0xfdd00000-0xfddfffff] [ 0.302496] pci_bus 0000:01: resource 2 pref mem [0xfdc00000-0xfdcfffff] [ 0.302499] pci_bus 0000:02: resource 0 io: [0xc000-0xcfff] [ 0.302502] pci_bus 0000:02: resource 1 mem: [0xfdb00000-0xfdbfffff] [ 0.302505] pci_bus 0000:02: resource 2 pref mem [0xfde00000-0xfdefffff] [ 0.302507] pci_bus 0000:02: resource 3 io: [0x00-0xffff] [ 0.302510] pci_bus 0000:02: resource 4 mem: [0x000000-0xffffffffffffffff] [ 0.302551] NET: Registered protocol family 2 [ 0.302688] IP route cache hash table entries: 65536 (order: 7, 524288 bytes) [ 0.303624] TCP established hash table entries: 262144 (order: 10, 4194304 bytes) [ 0.305603] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.306104] TCP: Hash tables configured (established 262144 bind 65536) [ 0.306108] TCP reno registered [ 0.306209] NET: Registered protocol family 1 [ 0.306282] Trying to unpack rootfs image as initramfs... [ 0.512575] Freeing initrd memory: 8264k freed [ 0.517567] Scanning for low memory corruption every 60 seconds [ 0.517922] audit: initializing netlink socket (disabled) [ 0.517941] type=2000 audit(1251313716.516:1): initialized [ 0.527343] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.531259] VFS: Disk quotas dquot_6.5.2 [ 0.531369] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.533086] fuse init (API version 7.12) [ 0.533298] msgmni has been set to 3888 [ 0.533629] alg: No test for stdrng (krng) [ 0.533646] io scheduler noop registered [ 0.533649] io scheduler anticipatory registered [ 0.533651] io scheduler deadline registered [ 0.533737] io scheduler cfq registered (default) [ 0.533760] pci 0000:00:00.0: Found disabled HT MSI Mapping [ 0.533765] pci 0000:00:00.0: Enabling HT MSI Mapping [ 0.533801] pci 0000:00:00.0: Found enabled HT MSI Mapping [ 0.533808] pci 0000:00:05.0: Boot video device [ 0.564063] pci 0000:00:09.0: Found disabled HT MSI Mapping [ 0.564070] pci 0000:00:0e.0: Enabling HT MSI Mapping [ 0.564120] pci 0000:00:09.0: Found disabled HT MSI Mapping [ 0.564125] pci 0000:00:10.0: Enabling HT MSI Mapping [ 0.564177] pci 0000:00:09.0: Found disabled HT MSI Mapping [ 0.564185] pci 0000:00:10.1: Enabling HT MSI Mapping [ 0.564413] alloc irq_desc for 24 on node 0 [ 0.564416] alloc kstat_irqs on node 0 [ 0.564424] pcieport-driver 0000:00:04.0: irq 24 for MSI/MSI-X [ 0.564430] pcieport-driver 0000:00:04.0: setting latency timer to 64 [ 0.564712] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.564887] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 0.565323] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0 [ 0.565327] ACPI: Power Button [PWRF] [ 0.565431] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1 [ 0.565434] ACPI: Power Button [PWRB] [ 0.565596] fan PNP0C0B:00: registered as cooling_device0 [ 0.565605] ACPI: Fan [FAN] (on) [ 0.566258] processor LNXCPU:00: registered as cooling_device1 [ 0.566350] processor LNXCPU:01: registered as cooling_device2 [ 0.570830] thermal LNXTHERM:01: registered as thermal_zone0 [ 0.570840] ACPI: Thermal Zone [THRM] (40 C) [ 0.576045] Linux agpgart interface v0.103 [ 0.576051] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.578890] brd: module loaded [ 0.580000] loop: module loaded [ 0.580326] input: Macintosh mouse button emulation as /devices/virtual/input/input2 [ 0.581383] sata_nv 0000:00:0e.0: version 3.5 [ 0.581833] ACPI: PCI Interrupt Link [APSI] enabled at IRQ 23 [ 0.581838] alloc irq_desc for 23 on node 0 [ 0.581840] alloc kstat_irqs on node 0 [ 0.581852] sata_nv 0000:00:0e.0: PCI INT A -> Link[APSI] -> GSI 23 (level, low) -> IRQ 23 [ 0.581855] sata_nv 0000:00:0e.0: Using SWNCQ mode [ 0.581902] sata_nv 0000:00:0e.0: setting latency timer to 64 [ 0.582032] scsi0 : sata_nv [ 0.582265] scsi1 : sata_nv [ 0.582546] ata1: SATA max UDMA/133 cmd 0x9f0 ctl 0xbf0 bmdma 0xe000 irq 23 [ 0.582550] ata2: SATA max UDMA/133 cmd 0x970 ctl 0xb70 bmdma 0xe008 irq 23 [ 0.582950] pata_amd 0000:00:0d.0: version 0.4.1 [ 0.582991] pata_amd 0000:00:0d.0: setting latency timer to 64 [ 0.583063] scsi2 : pata_amd [ 0.583227] scsi3 : pata_amd [ 0.584221] ata3: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xf400 irq 14 [ 0.584225] ata4: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xf408 irq 15 [ 0.586600] Fixed MDIO Bus: probed [ 0.586606] PPP generic driver version 2.4.2 [ 0.586880] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.587347] ACPI: PCI Interrupt Link [APCL] enabled at IRQ 22 [ 0.587353] alloc irq_desc for 22 on node 0 [ 0.587355] alloc kstat_irqs on node 0 [ 0.587366] ehci_hcd 0000:00:0b.1: PCI INT B -> Link[APCL] -> GSI 22 (level, low) -> IRQ 22 [ 0.587381] ehci_hcd 0000:00:0b.1: setting latency timer to 64 [ 0.587385] ehci_hcd 0000:00:0b.1: EHCI Host Controller [ 0.587462] ehci_hcd 0000:00:0b.1: new USB bus registered, assigned bus number 1 [ 0.587494] ehci_hcd 0000:00:0b.1: debug port 1 [ 0.587499] ehci_hcd 0000:00:0b.1: cache line size of 64 is not supported [ 0.587522] ehci_hcd 0000:00:0b.1: irq 22, io mem 0xfe02e000 [ 0.596014] ehci_hcd 0000:00:0b.1: USB 2.0 started, EHCI 1.00 [ 0.596150] usb usb1: configuration #1 chosen from 1 choice [ 0.596231] hub 1-0:1.0: USB hub found [ 0.596240] hub 1-0:1.0: 8 ports detected [ 0.596360] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.596860] ACPI: PCI Interrupt Link [APCF] enabled at IRQ 21 [ 0.596865] alloc irq_desc for 21 on node 0 [ 0.596867] alloc kstat_irqs on node 0 [ 0.596877] ohci_hcd 0000:00:0b.0: PCI INT A -> Link[APCF] -> GSI 21 (level, low) -> IRQ 21 [ 0.596890] ohci_hcd 0000:00:0b.0: setting latency timer to 64 [ 0.596894] ohci_hcd 0000:00:0b.0: OHCI Host Controller [ 0.596990] ohci_hcd 0000:00:0b.0: new USB bus registered, assigned bus number 2 [ 0.597025] ohci_hcd 0000:00:0b.0: irq 21, io mem 0xfe02f000 [ 0.654135] usb usb2: configuration #1 chosen from 1 choice [ 0.654211] hub 2-0:1.0: USB hub found [ 0.654222] hub 2-0:1.0: 8 ports detected [ 0.654333] uhci_hcd: USB Universal Host Controller Interface driver [ 0.654667] PNP: No PS/2 controller found. Probing ports directly. [ 0.655117] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.655126] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 0.655469] mice: PS/2 mouse device common for all mice [ 0.655734] rtc_cmos 00:05: RTC can wake from S4 [ 0.655834] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0 [ 0.655871] rtc0: alarms up to one year, y3k, 242 bytes nvram, hpet irqs [ 0.656138] device-mapper: uevent: version 1.0.3 [ 0.656332] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com [ 0.656441] device-mapper: multipath: version 1.1.0 loaded [ 0.656444] device-mapper: multipath round-robin: version 1.0.0 loaded [ 0.656689] cpuidle: using governor ladder [ 0.656691] cpuidle: using governor menu [ 0.657327] TCP cubic registered [ 0.657636] NET: Registered protocol family 10 [ 0.658112] lo: Disabled Privacy Extensions [ 0.658398] NET: Registered protocol family 17 [ 0.658466] Bluetooth: L2CAP ver 2.13 [ 0.658468] Bluetooth: L2CAP socket layer initialized [ 0.658471] Bluetooth: SCO (Voice Link) ver 0.6 [ 0.658472] Bluetooth: SCO socket layer initialized [ 0.658509] Bluetooth: RFCOMM TTY layer initialized [ 0.658513] Bluetooth: RFCOMM socket layer initialized [ 0.658514] Bluetooth: RFCOMM ver 1.11 [ 0.658522] powernow-k8: Found 1 AMD Athlon(tm) 64 X2 Dual Core Processor 3800+ processors (2 cpu cores) (version 2.20.00) [ 0.658578] powernow-k8: 0 : fid 0xc (2000 MHz), vid 0x13 [ 0.658580] powernow-k8: 1 : fid 0xa (1800 MHz), vid 0x15 [ 0.658583] powernow-k8: 2 : fid 0x2 (1000 MHz), vid 0x16 [ 0.658633] powernow-k8: ph2 null fid transition 0xc [ 0.658984] PM: Resume from disk failed. [ 0.658998] registered taskstats version 1 [ 0.659144] Magic number: 5:48:143 [ 0.659160] block ram8: hash matches [ 0.659202] acpi device:14: hash matches [ 0.659249] rtc_cmos 00:05: setting system clock to 2009-08-26 19:08:37 UTC (1251313717) [ 0.659253] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 0.659254] EDD information not available. [ 0.736048] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [ 0.744530] ata3.00: ATAPI: HL-DT-STDVDRRW GSA-H20L, S853, max UDMA/33 [ 0.744556] ata3: nv_mode_filter: 0x739f&0x701f->0x701f, BIOS=0x7000 (0xc0000000) ACPI=0x701f (60:600:0x13) [ 0.744693] ata1.00: ATA-7: SAMSUNG SP2504C, VT100-49, max UDMA7 [ 0.744696] ata1.00: 488397168 sectors, multi 1: LBA48 NCQ (depth 31/32) [ 0.760450] ata3.00: configured for UDMA/33 [ 0.792181] ata1.00: configured for UDMA/133 [ 0.792300] scsi 0:0:0:0: Direct-Access ATA SAMSUNG SP2504C VT10 PQ: 0 ANSI: 5 [ 0.792674] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 0.792717] sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB) [ 0.803155] ata2: SATA link down (SStatus 0 SControl 310) [ 0.803189] sd 0:0:0:0: [sda] Write Protect is off [ 0.803193] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 0.803216] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 0.803392] sda: [ 0.804785] scsi 2:0:0:0: CD-ROM HL-DT-ST DVDRRW GSA-H20L S853 PQ: 0 ANSI: 5 [ 0.809991] sr0: scsi3-mmc drive: 40x/40x writer dvd-ram cd/rw xa/form2 cdda tray [ 0.809995] Uniform CD-ROM driver Revision: 3.20 [ 0.810185] sr 2:0:0:0: Attached scsi CD-ROM sr0 [ 0.810315] sr 2:0:0:0: Attached scsi generic sg1 type 5 [ 0.810352] ata4: port disabled. ignoring. [ 0.811078] sda1 sda2 sda3 < sda5 sda6 > [ 0.848156] sd 0:0:0:0: [sda] Attached SCSI disk [ 0.848186] Freeing unused kernel memory: 656k freed [ 0.848518] Write protecting the kernel read-only data: 7536k [ 0.943639] ramzswap: disk size set to 497932 kB [ 0.972397] [drm] Initialized drm 1.1.0 20060810 [ 1.025034] usb 1-5: new high speed USB device using ehci_hcd and address 4 [ 1.110782] xor: automatically using best checksumming function: generic_sse [ 1.128009] generic_sse: 6169.000 MB/sec [ 1.128012] xor: using function: generic_sse (6169.000 MB/sec) [ 1.165077] device-mapper: dm-raid45: initialized v0.2594b [ 1.172561] usb 1-5: configuration #1 chosen from 1 choice [ 1.239924] Initializing USB Mass Storage driver... [ 1.241524] scsi4 : SCSI emulation for USB Mass Storage devices [ 1.241636] usbcore: registered new interface driver usb-storage [ 1.241639] USB Mass Storage support registered. [ 1.241744] usb-storage: device found at 4 [ 1.241746] usb-storage: waiting for device to settle before scanning [ 1.282251] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.64. [ 1.282694] ACPI: PCI Interrupt Link [APCH] enabled at IRQ 20 [ 1.282700] alloc irq_desc for 20 on node 0 [ 1.282703] alloc kstat_irqs on node 0 [ 1.282716] forcedeth 0000:00:14.0: PCI INT A -> Link[APCH] -> GSI 20 (level, low) -> IRQ 20 [ 1.282721] forcedeth 0000:00:14.0: setting latency timer to 64 [ 1.282778] nv_probe: set workaround bit for reversed mac addr [ 1.318715] ACPI: PCI Interrupt Link [APC1] enabled at IRQ 16 [ 1.318722] alloc irq_desc for 16 on node 0 [ 1.318725] alloc kstat_irqs on node 0 [ 1.318737] ohci1394 0000:02:05.0: PCI INT A -> Link[APC1] -> GSI 16 (level, low) -> IRQ 16 [ 1.323911] Adding 497928k swap on /dev/ramzswap0. Priority:100 extents:1 across:497928k SSD [ 1.374123] ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[16] MMIO=[fdbff000-fdbff7ff] Max Packet=[1024] IR/IT contexts=[8/8] [ 1.481025] usb 2-1: new low speed USB device using ohci_hcd and address 2 [ 1.701132] usb 2-1: configuration #1 chosen from 1 choice [ 1.710068] usbcore: registered new interface driver hiddev [ 1.718675] input: CHESEN USB Keyboard as /devices/pci0000:00/0000:00:0b.0/usb2/2-1/2-1:1.0/input/input3 [ 1.719086] generic-usb 0003:0A81:0101.0001: input,hidraw0: USB HID v1.10 Keyboard [CHESEN USB Keyboard] on usb-0000:00:0b.0-1/input0 [ 1.732162] input: CHESEN USB Keyboard as /devices/pci0000:00/0000:00:0b.0/usb2/2-1/2-1:1.1/input/input4 [ 1.732282] generic-usb 0003:0A81:0101.0002: input,hidraw1: USB HID v1.10 Device [CHESEN USB Keyboard] on usb-0000:00:0b.0-1/input1 [ 1.732303] usbcore: registered new interface driver usbhid [ 1.732336] usbhid: v2.6:USB HID core driver [ 1.805048] forcedeth 0000:00:14.0: ifname eth0, PHY OUI 0x732 @ 13, addr 00:18:f3:fa:6e:f5 [ 1.805053] forcedeth 0000:00:14.0: highdma pwrctl lnktim desc-v3 [ 1.964581] PM: Starting manual resume from disk [ 1.964585] PM: Resume from partition 8:6 [ 1.964587] PM: Checking hibernation image. [ 1.964797] PM: Resume from disk failed. [ 1.968371] EXT4-fs (sda5): INFO: recovery required on readonly filesystem [ 1.968377] EXT4-fs (sda5): write access will be enabled during recovery [ 1.986123] EXT4-fs (sda5): barriers enabled [ 2.005024] usb 2-2: new low speed USB device using ohci_hcd and address 3 [ 2.219147] usb 2-2: configuration #1 chosen from 1 choice [ 2.229356] input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:0b.0/usb2/2-2/2-2:1.0/input/input5 [ 2.229446] generic-usb 0003:046D:C03F.0003: input,hidraw2: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:0b.0-2/input0 [ 2.653245] ieee1394: Host added: ID:BUS[0-00:1023] GUID[0018e00000000001] [ 4.604690] kjournald2 starting: pid 1180, dev sda5:8, commit interval 5 seconds [ 4.604725] EXT4-fs (sda5): delayed allocation enabled [ 4.604729] EXT4-fs: file extents enabled [ 4.604872] EXT4-fs: mballoc enabled [ 4.604887] EXT4-fs (sda5): orphan cleanup on readonly fs [ 4.624854] EXT4-fs (sda5): ext4_orphan_cleanup: deleting unreferenced inode 284842 [ 4.624958] EXT4-fs (sda5): ext4_orphan_cleanup: deleting unreferenced inode 284836 [ 4.625023] EXT4-fs (sda5): 2 orphan inodes deleted [ 4.625026] EXT4-fs (sda5): recovery complete [ 4.974038] EXT4-fs (sda5): mounted filesystem with ordered data mode [ 6.240235] usb-storage: device scan complete [ 6.241814] scsi 4:0:0:0: Direct-Access Generic USB SD Reader 1.00 PQ: 0 ANSI: 0 [ 6.242431] scsi 4:0:0:1: Direct-Access Generic USB CF Reader 1.01 PQ: 0 ANSI: 0 [ 6.243055] scsi 4:0:0:2: Direct-Access Generic USB SM Reader 1.02 PQ: 0 ANSI: 0 [ 6.243679] scsi 4:0:0:3: Direct-Access Generic USB MS Reader 1.03 PQ: 0 ANSI: 0 [ 6.244116] sd 4:0:0:0: Attached scsi generic sg2 type 0 [ 6.244235] sd 4:0:0:1: Attached scsi generic sg3 type 0 [ 6.244360] sd 4:0:0:2: Attached scsi generic sg4 type 0 [ 6.244486] sd 4:0:0:3: Attached scsi generic sg5 type 0 [ 6.247179] sd 4:0:0:0: [sdb] Attached SCSI removable disk [ 6.247817] sd 4:0:0:1: [sdc] Attached SCSI removable disk [ 6.248427] sd 4:0:0:2: [sdd] Attached SCSI removable disk [ 6.249052] sd 4:0:0:3: [sde] Attached SCSI removable disk [ 9.900937] udev: starting version 145 [ 11.705652] nvidia: module license 'NVIDIA' taints kernel. [ 11.705657] Disabling lock debugging due to kernel taint [ 11.716782] EDAC MC: Ver: 2.1.0 Aug 14 2009 [ 11.717609] k8temp 0000:00:18.3: Temperature readouts might be wrong - check erratum #141 [ 11.728244] i2c-adapter i2c-0: nForce2 SMBus adapter at 0x4c00 [ 11.728337] i2c-adapter i2c-1: nForce2 SMBus adapter at 0x4c40 [ 11.784258] EDAC amd64_edac: Ver: 3.2.0 Aug 14 2009 [ 11.787839] EDAC amd64: This node reports that Memory ECC is currently disabled. [ 11.787845] EDAC amd64: bit 0x400000 in register F3x44 of the MISC_CONTROL device (0000:00:18.3) should be enabled [ 11.787849] EDAC amd64: bit 0x0000000000000010 in MSR 0x0000017b of node 0 should be enabled [ 11.787852] EDAC amd64: WARNING: ECC is NOT currently enabled by the BIOS. Module will NOT be loaded. [ 11.787853] Either Enable ECC in the BIOS, or use the 'ecc_enable_override' parameter. [ 11.787855] Might be a BIOS bug, if BIOS says ECC is enabled [ 11.787856] Use of the override can cause unknown side effects. [ 11.787881] amd64_edac: probe of 0000:00:18.2 failed with error -22 [ 11.978404] ACPI: PCI Interrupt Link [APC7] enabled at IRQ 16 [ 11.978411] nvidia 0000:00:05.0: PCI INT A -> Link[APC7] -> GSI 16 (level, low) -> IRQ 16 [ 11.978418] nvidia 0000:00:05.0: setting latency timer to 64 [ 11.978969] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 185.18.14 Wed May 27 01:23:47 PDT 2009 [ 12.125061] ACPI: PCI Interrupt Link [AAZA] enabled at IRQ 23 [ 12.125069] HDA Intel 0000:00:10.1: PCI INT B -> Link[AAZA] -> GSI 23 (level, low) -> IRQ 23 [ 12.125101] HDA Intel 0000:00:10.1: setting latency timer to 64 [ 12.692018] hda_codec: Unknown model for ALC888, trying auto-probe from BIOS... [ 12.708094] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:10.1/input/input6 [ 13.228517] lp: driver loaded but no devices found [ 13.430577] Adding 1461872k swap on /dev/sda6. Priority:-1 extents:1 across:1461872k [ 13.995003] EXT4-fs (sda5): internal journal on sda5:8 [ 15.262423] type=1505 audit(1251306532.101:2): operation="profile_load" pid=2107 name=/usr/bin/evince [ 15.265755] type=1505 audit(1251306532.105:3): operation="profile_load" pid=2107 name=/usr/bin/evince-previewer [ 15.267760] type=1505 audit(1251306532.105:4): operation="profile_load" pid=2107 name=/usr/bin/evince-thumbnailer [ 15.283947] type=1505 audit(1251306532.121:5): operation="profile_load" pid=2108 name=/usr/sbin/tcpdump [ 15.286314] type=1505 audit(1251306532.125:6): operation="profile_load" pid=2109 name=/usr/share/gdm/guest-session/Xsession [ 15.289342] type=1505 audit(1251306532.129:7): operation="profile_load" pid=2110 name=/usr/lib/cups/backend/cups-pdf [ 15.289678] type=1505 audit(1251306532.129:8): operation="profile_load" pid=2110 name=/usr/sbin/cupsd [ 15.292910] type=1505 audit(1251306532.129:9): operation="profile_load" pid=2111 name=/sbin/dhclient3 [ 15.293221] type=1505 audit(1251306532.133:10): operation="profile_load" pid=2111 name=/usr/lib/NetworkManager/nm-dhcp-client.action [ 15.293381] type=1505 audit(1251306532.133:11): operation="profile_load" pid=2111 name=/usr/lib/connman/scripts/dhclient-script [ 23.965764] ppdev: user-space parallel port driver