[ 0.000000] BIOS EBDA/lowmem at: 0009f000/0009f000 [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.28-15-generic (buildd@palmer) (gcc version 4.3.3 (Ubuntu 4.3.3-5ubuntu4) ) #49-Ubuntu SMP Tue Aug 18 18:40:08 UTC 2009 (Ubuntu 2.6.28-15.49-generic) [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] NSC Geode by NSC [ 0.000000] Cyrix CyrixInstead [ 0.000000] Centaur CentaurHauls [ 0.000000] Transmeta GenuineTMx86 [ 0.000000] Transmeta TransmetaCPU [ 0.000000] UMC UMC UMC UMC [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f000 (usable) [ 0.000000] BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 00000000df66d800 (usable) [ 0.000000] BIOS-e820: 00000000df66d800 - 00000000e0000000 (reserved) [ 0.000000] BIOS-e820: 00000000f8000000 - 00000000fc000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) [ 0.000000] BIOS-e820: 00000000fed18000 - 00000000fed1c000 (reserved) [ 0.000000] BIOS-e820: 00000000fed20000 - 00000000fed90000 (reserved) [ 0.000000] BIOS-e820: 00000000feda0000 - 00000000feda6000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee10000 (reserved) [ 0.000000] BIOS-e820: 00000000ffe00000 - 0000000100000000 (reserved) [ 0.000000] BIOS-e820: 0000000100000000 - 0000000120000000 (usable) [ 0.000000] DMI 2.4 present. [ 0.000000] last_pfn = 0xdf66d max_arch_pfn = 0x100000 [ 0.000000] Scanning 2 areas for low memory corruption [ 0.000000] modified physical RAM map: [ 0.000000] modified: 0000000000000000 - 0000000000002000 (usable) [ 0.000000] modified: 0000000000002000 - 0000000000006000 (reserved) [ 0.000000] modified: 0000000000006000 - 0000000000007000 (usable) [ 0.000000] modified: 0000000000007000 - 0000000000010000 (reserved) [ 0.000000] modified: 0000000000010000 - 0000000000092000 (usable) [ 0.000000] modified: 000000000009f000 - 00000000000a0000 (reserved) [ 0.000000] modified: 0000000000100000 - 00000000df66d800 (usable) [ 0.000000] modified: 00000000df66d800 - 00000000e0000000 (reserved) [ 0.000000] modified: 00000000f8000000 - 00000000fc000000 (reserved) [ 0.000000] modified: 00000000fec00000 - 00000000fec10000 (reserved) [ 0.000000] modified: 00000000fed18000 - 00000000fed1c000 (reserved) [ 0.000000] modified: 00000000fed20000 - 00000000fed90000 (reserved) [ 0.000000] modified: 00000000feda0000 - 00000000feda6000 (reserved) [ 0.000000] modified: 00000000fee00000 - 00000000fee10000 (reserved) [ 0.000000] modified: 00000000ffe00000 - 0000000100000000 (reserved) [ 0.000000] modified: 0000000100000000 - 0000000120000000 (usable) [ 0.000000] kernel direct mapping tables up to 373fe000 @ 10000-16000 [ 0.000000] RAMDISK: 378c6000 - 37fefe34 [ 0.000000] Allocated new RAMDISK: 0087d000 - 00fa6e34 [ 0.000000] Move RAMDISK from 00000000378c6000 - 0000000037fefe33 to 0087d000 - 00fa6e33 [ 0.000000] ACPI: RSDP 000FBC60, 0024 (r2 DELL ) [ 0.000000] ACPI: XSDT DF66F200, 0064 (r1 DELL M08 27D8061B ASL 61) [ 0.000000] ACPI: FACP DF66F09C, 00F4 (r4 DELL M08 27D8061B ASL 61) [ 0.000000] ACPI: DSDT DF66F800, 5477 (r2 INT430 SYSFexxx 1001 INTL 20050624) [ 0.000000] ACPI: FACS DF67E000, 0040 [ 0.000000] ACPI: HPET DF66F300, 0038 (r1 DELL M08 1 ASL 61) [ 0.000000] ACPI: APIC DF66F400, 0068 (r1 DELL M08 27D8061B ASL 47) [ 0.000000] ACPI: MCFG DF66F3C0, 003E (r16 DELL M08 27D8061B ASL 61) [ 0.000000] ACPI: SLIC DF66F49C, 0024 (r1 DELL M08 27D8061B ASL 61) [ 0.000000] ACPI: OSFR DF66EA00, 002C (r1 DELL M08 27D8061B ASL 61) [ 0.000000] ACPI: BOOT DF66EFC0, 0028 (r1 DELL M08 27D8061B ASL 61) [ 0.000000] ACPI: SSDT DF66DA44, 04CC (r1 PmRef CpuPm 3000 INTL 20050624) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] 2690MB HIGHMEM available. [ 0.000000] 883MB LOWMEM available. [ 0.000000] mapped low ram: 0 - 373fe000 [ 0.000000] low ram: 00000000 - 373fe000 [ 0.000000] bootmap 00012000 - 00018e80 [ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 00373fe000] [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] [ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000] [ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000] [ 0.000000] #3 [0000100000 - 00008780ac] TEXT DATA BSS ==> [0000100000 - 00008780ac] [ 0.000000] #4 [0000879000 - 000087d000] INIT_PG_TABLE ==> [0000879000 - 000087d000] [ 0.000000] #5 [000009f000 - 0000100000] BIOS reserved ==> [000009f000 - 0000100000] [ 0.000000] #6 [0000010000 - 0000012000] PGTABLE ==> [0000010000 - 0000012000] [ 0.000000] #7 [000087d000 - 0000fa6e34] NEW RAMDISK ==> [000087d000 - 0000fa6e34] [ 0.000000] #8 [0000012000 - 0000019000] BOOTMAP ==> [0000012000 - 0000019000] [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000000 -> 0x00001000 [ 0.000000] Normal 0x00001000 -> 0x000373fe [ 0.000000] HighMem 0x000373fe -> 0x000df66d [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[4] active PFN ranges [ 0.000000] 0: 0x00000000 -> 0x00000002 [ 0.000000] 0: 0x00000006 -> 0x00000007 [ 0.000000] 0: 0x00000010 -> 0x00000092 [ 0.000000] 0: 0x00000100 -> 0x000df66d [ 0.000000] On node 0 totalpages: 914930 [ 0.000000] free_area_init_node: node 0, pgdat c06cb500, node_mem_map c1000000 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 3941 pages, LIFO batch:0 [ 0.000000] Normal zone: 1736 pages used for memmap [ 0.000000] Normal zone: 220470 pages, LIFO batch:31 [ 0.000000] HighMem zone: 5381 pages used for memmap [ 0.000000] HighMem zone: 683370 pages, LIFO batch:31 [ 0.000000] Movable zone: 0 pages used for memmap [ 0.000000] ACPI: PM-Timer IO Port: 0x1008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs [ 0.000000] PM: Registered nosave memory: 0000000000002000 - 0000000000006000 [ 0.000000] PM: Registered nosave memory: 0000000000007000 - 0000000000010000 [ 0.000000] PM: Registered nosave memory: 0000000000092000 - 000000000009f000 [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 0000000000100000 [ 0.000000] Allocating PCI resources starting at e2000000 (gap: e0000000:18000000) [ 0.000000] PERCPU: Allocating 45056 bytes of per cpu data [ 0.000000] NR_CPUS: 64, nr_cpu_ids: 2, nr_node_ids 1 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 907781 [ 0.000000] Kernel command line: root=LABEL=os2 ro quiet splash no_console_suspend [ 0.000000] Enabling fast FPU save and restore... done. [ 0.000000] Enabling unmasked SIMD FPU exception support... done. [ 0.000000] Initializing CPU#0 [ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes) [ 0.000000] Extended CMOS year: 2000 [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 1828.892 MHz processor. [ 0.004000] Console: colour VGA+ 80x25 [ 0.004000] console [tty0] enabled [ 0.004000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.004000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.004000] allocated 18301060 bytes of page_cgroup [ 0.004000] please try cgroup_disable=memory option if you don't want [ 0.004000] Scanning for low memory corruption every 60 seconds [ 0.004000] Memory: 3596352k/3660212k available (4115k kernel code, 62468k reserved, 2199k data, 532k init, 2755004k highmem) [ 0.004000] virtual kernel memory layout: [ 0.004000] fixmap : 0xffc77000 - 0xfffff000 (3616 kB) [ 0.004000] pkmap : 0xff400000 - 0xff800000 (4096 kB) [ 0.004000] vmalloc : 0xf7bfe000 - 0xff3fe000 ( 120 MB) [ 0.004000] lowmem : 0xc0000000 - 0xf73fe000 ( 883 MB) [ 0.004000] .init : 0xc0733000 - 0xc07b8000 ( 532 kB) [ 0.004000] .data : 0xc0504f5f - 0xc072ae60 (2199 kB) [ 0.004000] .text : 0xc0100000 - 0xc0504f5f (4115 kB) [ 0.004000] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.004000] SLUB: Genslabs=12, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 [ 0.004000] hpet clockevent registered [ 0.004000] HPET: 3 timers in total, 0 timers will be used for per-cpu timer [ 0.004000] Calibrating delay loop (skipped), value calculated using timer frequency.. 3657.78 BogoMIPS (lpj=7315568) [ 0.004000] Security Framework initialized [ 0.004000] SELinux: Disabled at boot. [ 0.004000] AppArmor: AppArmor initialized [ 0.004000] Mount-cache hash table entries: 512 [ 0.004000] Initializing cgroup subsys ns [ 0.004000] Initializing cgroup subsys cpuacct [ 0.004000] Initializing cgroup subsys memory [ 0.004000] Initializing cgroup subsys freezer [ 0.004000] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.004000] CPU: L2 cache: 2048K [ 0.004000] CPU: Physical Processor ID: 0 [ 0.004000] CPU: Processor Core ID: 0 [ 0.004000] using mwait in idle threads. [ 0.004000] Checking 'hlt' instruction... OK. [ 0.018530] ACPI: Core revision 20080926 [ 0.020465] ACPI: Checking initramfs for custom DSDT [ 0.340484] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.380274] CPU0: Intel(R) Core(TM)2 Duo CPU T5550 @ 1.83GHz stepping 0d [ 0.384001] Booting processor 1 APIC 0x1 ip 0x6000 [ 0.004000] Initializing CPU#1 [ 0.004000] Calibrating delay using timer specific routine.. 3657.50 BogoMIPS (lpj=7315015) [ 0.004000] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.004000] CPU: L2 cache: 2048K [ 0.004000] CPU: Physical Processor ID: 0 [ 0.004000] CPU: Processor Core ID: 1 [ 0.468475] CPU1: Intel(R) Core(TM)2 Duo CPU T5550 @ 1.83GHz stepping 0d [ 0.468492] checking TSC synchronization [CPU#0 -> CPU#1]: passed. [ 0.472037] Brought up 2 CPUs [ 0.472040] Total of 2 processors activated (7315.29 BogoMIPS). [ 0.472097] CPU0 attaching sched-domain: [ 0.472100] domain 0: span 0-1 level MC [ 0.472103] groups: 0 1 [ 0.472110] CPU1 attaching sched-domain: [ 0.472112] domain 0: span 0-1 level MC [ 0.472114] groups: 1 0 [ 0.472184] net_namespace: 776 bytes [ 0.472184] Booting paravirtualized kernel on bare hardware [ 0.472344] Time: 20:08:10 Date: 08/25/09 [ 0.472344] regulator: core version 0.5 [ 0.472344] NET: Registered protocol family 16 [ 0.472344] EISA bus registered [ 0.472344] ACPI: bus type pci registered [ 0.472344] PCI: MCFG configuration 0: base f8000000 segment 0 buses 0 - 63 [ 0.472344] PCI: MCFG area at f8000000 reserved in E820 [ 0.472344] PCI: Using MMCONFIG for extended config space [ 0.472344] PCI: Using configuration type 1 for base access [ 0.473195] ACPI: EC: Look up EC in DSDT [ 0.503678] ACPI: Interpreter enabled [ 0.503683] ACPI: (supports S0 S3 S4 S5) [ 0.503701] ACPI: Using IOAPIC for interrupt routing [ 0.549828] ACPI: No dock devices found. [ 0.549839] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 0.549937] pci 0000:00:02.0: reg 10 64bit mmio: [0xfea00000-0xfeafffff] [ 0.549945] pci 0000:00:02.0: reg 18 64bit mmio: [0xe0000000-0xefffffff] [ 0.549951] pci 0000:00:02.0: reg 20 io port: [0xeff8-0xefff] [ 0.549990] pci 0000:00:02.1: reg 10 64bit mmio: [0xfeb00000-0xfebfffff] [ 0.550111] pci 0000:00:1a.0: reg 20 io port: [0x6f20-0x6f3f] [ 0.550182] pci 0000:00:1a.1: reg 20 io port: [0x6f00-0x6f1f] [ 0.550260] pci 0000:00:1a.7: reg 10 32bit mmio: [0xfed1c400-0xfed1c7ff] [ 0.550313] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold [ 0.550319] pci 0000:00:1a.7: PME# disabled [ 0.550382] pci 0000:00:1b.0: reg 10 64bit mmio: [0xfe9fc000-0xfe9fffff] [ 0.550427] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.550433] pci 0000:00:1b.0: PME# disabled [ 0.550510] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.550515] pci 0000:00:1c.0: PME# disabled [ 0.550594] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold [ 0.550600] pci 0000:00:1c.1: PME# disabled [ 0.550681] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold [ 0.550687] pci 0000:00:1c.4: PME# disabled [ 0.550758] pci 0000:00:1d.0: reg 20 io port: [0x6f80-0x6f9f] [ 0.550828] pci 0000:00:1d.1: reg 20 io port: [0x6f60-0x6f7f] [ 0.550898] pci 0000:00:1d.2: reg 20 io port: [0x6f40-0x6f5f] [ 0.550974] pci 0000:00:1d.7: reg 10 32bit mmio: [0xfed1c000-0xfed1c3ff] [ 0.551027] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold [ 0.551033] pci 0000:00:1d.7: PME# disabled [ 0.551209] pci 0000:00:1f.0: quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO [ 0.551213] pci 0000:00:1f.0: quirk: region 1080-10bf claimed by ICH6 GPIO [ 0.551254] pci 0000:00:1f.1: reg 10 io port: [0x1f0-0x1f7] [ 0.551263] pci 0000:00:1f.1: reg 14 io port: [0x3f4-0x3f7] [ 0.551272] pci 0000:00:1f.1: reg 18 io port: [0x170-0x177] [ 0.551280] pci 0000:00:1f.1: reg 1c io port: [0x374-0x377] [ 0.551289] pci 0000:00:1f.1: reg 20 io port: [0x6fa0-0x6faf] [ 0.551370] pci 0000:00:1f.2: reg 10 io port: [0x6eb0-0x6eb7] [ 0.551379] pci 0000:00:1f.2: reg 14 io port: [0x6eb8-0x6ebb] [ 0.551388] pci 0000:00:1f.2: reg 18 io port: [0x6ec0-0x6ec7] [ 0.551396] pci 0000:00:1f.2: reg 1c io port: [0x6ec8-0x6ecb] [ 0.551405] pci 0000:00:1f.2: reg 20 io port: [0x6ee0-0x6eff] [ 0.551414] pci 0000:00:1f.2: reg 24 32bit mmio: [0xfe9fb800-0xfe9fbfff] [ 0.551437] pci 0000:00:1f.2: PME# supported from D3hot [ 0.551442] pci 0000:00:1f.2: PME# disabled [ 0.551479] pci 0000:00:1f.3: reg 10 32bit mmio: [0xfe9fb700-0xfe9fb7ff] [ 0.551508] pci 0000:00:1f.3: reg 20 io port: [0x10c0-0x10df] [ 0.551620] pci 0000:09:00.0: reg 10 64bit mmio: [0xfe8fc000-0xfe8fffff] [ 0.551632] pci 0000:09:00.0: reg 18 io port: [0xde00-0xdeff] [ 0.551690] pci 0000:09:00.0: supports D1 D2 [ 0.551693] pci 0000:09:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.551700] pci 0000:09:00.0: PME# disabled [ 0.551784] pci 0000:00:1c.0: bridge io port: [0xd000-0xdfff] [ 0.551790] pci 0000:00:1c.0: bridge 32bit mmio: [0xfe800000-0xfe8fffff] [ 0.551985] pci 0000:0b:00.0: reg 10 32bit mmio: [0xfe7ff000-0xfe7fffff] [ 0.552165] pci 0000:0b:00.0: PME# supported from D0 D3hot D3cold [ 0.552178] pci 0000:0b:00.0: PME# disabled [ 0.552295] pci 0000:00:1c.1: bridge 32bit mmio: [0xfe700000-0xfe7fffff] [ 0.552371] pci 0000:00:1c.4: bridge io port: [0xc000-0xcfff] [ 0.552377] pci 0000:00:1c.4: bridge 32bit mmio: [0xfe400000-0xfe6fffff] [ 0.552386] pci 0000:00:1c.4: bridge 64bit mmio pref: [0xf0000000-0xf01fffff] [ 0.552453] pci 0000:02:09.0: reg 10 32bit mmio: [0xfe3ff800-0xfe3fffff] [ 0.552507] pci 0000:02:09.0: supports D1 D2 [ 0.552509] pci 0000:02:09.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.552515] pci 0000:02:09.0: PME# disabled [ 0.552564] pci 0000:02:09.1: reg 10 32bit mmio: [0xfe3ff400-0xfe3ff4ff] [ 0.552618] pci 0000:02:09.1: supports D1 D2 [ 0.552620] pci 0000:02:09.1: PME# supported from D0 D1 D2 D3hot D3cold [ 0.552626] pci 0000:02:09.1: PME# disabled [ 0.552674] pci 0000:02:09.2: reg 10 32bit mmio: [0xfe3ff500-0xfe3ff5ff] [ 0.552729] pci 0000:02:09.2: supports D1 D2 [ 0.552731] pci 0000:02:09.2: PME# supported from D0 D1 D2 D3hot D3cold [ 0.552737] pci 0000:02:09.2: PME# disabled [ 0.552785] pci 0000:02:09.3: reg 10 32bit mmio: [0xfe3ff600-0xfe3ff6ff] [ 0.552839] pci 0000:02:09.3: supports D1 D2 [ 0.552841] pci 0000:02:09.3: PME# supported from D0 D1 D2 D3hot D3cold [ 0.552847] pci 0000:02:09.3: PME# disabled [ 0.552894] pci 0000:02:09.4: reg 10 32bit mmio: [0xfe3ff700-0xfe3ff7ff] [ 0.552949] pci 0000:02:09.4: supports D1 D2 [ 0.552951] pci 0000:02:09.4: PME# supported from D0 D1 D2 D3hot D3cold [ 0.552956] pci 0000:02:09.4: PME# disabled [ 0.553014] pci 0000:00:1e.0: transparent bridge [ 0.553023] pci 0000:00:1e.0: bridge 32bit mmio: [0xfe300000-0xfe3fffff] [ 0.553061] bus 00 -> node 0 [ 0.553068] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.553582] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIE._PRT] [ 0.553761] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT] [ 0.553904] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT] [ 0.554048] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP05._PRT] [ 0.566715] ACPI: PCI Interrupt Link [LNKA] (IRQs 9 10 *11) [ 0.566859] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 7) *10 [ 0.567000] ACPI: PCI Interrupt Link [LNKC] (IRQs 9 10 11) *5 [ 0.567129] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 7 9 10 11) *0, disabled. [ 0.567275] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 *10 11 12 14 15) [ 0.567419] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 *9 10 11 12 14 15) [ 0.567563] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 *7 9 10 11 12 14 15) [ 0.567693] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. [ 0.567916] ACPI: WMI: Mapper loaded [ 0.568090] SCSI subsystem initialized [ 0.568104] libata version 3.00 loaded. [ 0.568104] usbcore: registered new interface driver usbfs [ 0.568104] usbcore: registered new interface driver hub [ 0.568104] usbcore: registered new device driver usb [ 0.568104] PCI: Using ACPI for IRQ routing [ 0.576010] Bluetooth: Core ver 2.13 [ 0.576024] NET: Registered protocol family 31 [ 0.576024] Bluetooth: HCI device and connection manager initialized [ 0.576024] Bluetooth: HCI socket layer initialized [ 0.576024] NET: Registered protocol family 8 [ 0.576024] NET: Registered protocol family 20 [ 0.576035] NetLabel: Initializing [ 0.576037] NetLabel: domain hash size = 128 [ 0.576039] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.576052] NetLabel: unlabeled traffic allowed by default [ 0.576068] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 0.576073] hpet0: 3 comparators, 64-bit 14.318180 MHz counter [ 0.580062] AppArmor: AppArmor Filesystem Enabled [ 0.584009] Switched to high resolution mode on CPU 0 [ 0.584528] Switched to high resolution mode on CPU 1 [ 0.588010] pnp: PnP ACPI init [ 0.588019] ACPI: bus type pnp registered [ 0.608240] pnp 00:0a: io resource (0x1000-0x1005) overlaps 0000:00:1f.0 BAR 7 (0x1000-0x107f), disabling [ 0.608244] pnp 00:0a: io resource (0x1008-0x100f) overlaps 0000:00:1f.0 BAR 7 (0x1000-0x107f), disabling [ 0.608350] pnp 00:0b: io resource (0x1006-0x1007) overlaps 0000:00:1f.0 BAR 7 (0x1000-0x107f), disabling [ 0.608353] pnp 00:0b: io resource (0x100a-0x1059) overlaps 0000:00:1f.0 BAR 7 (0x1000-0x107f), disabling [ 0.608356] pnp 00:0b: io resource (0x1060-0x107f) overlaps 0000:00:1f.0 BAR 7 (0x1000-0x107f), disabling [ 0.608359] pnp 00:0b: io resource (0x1010-0x102f) overlaps 0000:00:1f.0 BAR 7 (0x1000-0x107f), disabling [ 0.632838] pnp: PnP ACPI: found 13 devices [ 0.632841] ACPI: ACPI bus type pnp unregistered [ 0.632844] PnPBIOS: Disabled by ACPI PNP [ 0.632854] system 00:01: iomem range 0xff800000-0xff8fffff has been reserved [ 0.632857] system 00:01: iomem range 0xffc00000-0xffcfffff has been reserved [ 0.632865] system 00:06: ioport range 0xc80-0xcff could not be reserved [ 0.632873] system 00:09: iomem range 0xfed00000-0xfed003ff has been reserved [ 0.632879] system 00:0a: ioport range 0x900-0x97f has been reserved [ 0.632882] system 00:0a: ioport range 0x4d0-0x4d1 has been reserved [ 0.632889] system 00:0b: ioport range 0xf400-0xf4fe has been reserved [ 0.632891] system 00:0b: ioport range 0x1080-0x10bf has been reserved [ 0.632894] system 00:0b: ioport range 0x10c0-0x10df has been reserved [ 0.632897] system 00:0b: ioport range 0x809-0x809 has been reserved [ 0.632904] system 00:0c: iomem range 0x0-0x9efff could not be reserved [ 0.632907] system 00:0c: iomem range 0x9f000-0x9ffff could not be reserved [ 0.632910] system 00:0c: iomem range 0xc0000-0xcffff could not be reserved [ 0.632913] system 00:0c: iomem range 0xe0000-0xfffff could not be reserved [ 0.632915] system 00:0c: iomem range 0x100000-0xdf66d7ff could not be reserved [ 0.632918] system 00:0c: iomem range 0xdf66d800-0xdf6fffff has been reserved [ 0.632921] system 00:0c: iomem range 0xdf700000-0xdf7fffff has been reserved [ 0.632924] system 00:0c: iomem range 0xdf700000-0xdfefffff could not be reserved [ 0.632927] system 00:0c: iomem range 0xffe00000-0xffffffff has been reserved [ 0.632930] system 00:0c: iomem range 0xffa00000-0xffbfffff has been reserved [ 0.632933] system 00:0c: iomem range 0xfec00000-0xfec0ffff has been reserved [ 0.632936] system 00:0c: iomem range 0xfee00000-0xfee0ffff has been reserved [ 0.632939] system 00:0c: iomem range 0xfed20000-0xfed8ffff has been reserved [ 0.632942] system 00:0c: iomem range 0xfeda0000-0xfeda3fff has been reserved [ 0.632945] system 00:0c: iomem range 0xfeda4000-0xfeda4fff has been reserved [ 0.632948] system 00:0c: iomem range 0xfeda5000-0xfeda5fff has been reserved [ 0.632951] system 00:0c: iomem range 0xfeda6000-0xfeda6fff has been reserved [ 0.632954] system 00:0c: iomem range 0xfed18000-0xfed1bfff has been reserved [ 0.632957] system 00:0c: iomem range 0xf8000000-0xfbffffff has been reserved [ 0.667679] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:09 [ 0.667683] pci 0000:00:1c.0: IO window: 0xd000-0xdfff [ 0.667691] pci 0000:00:1c.0: MEM window: 0xfe800000-0xfe8fffff [ 0.667696] pci 0000:00:1c.0: PREFETCH window: disabled [ 0.667705] pci 0000:00:1c.1: PCI bridge, secondary bus 0000:0b [ 0.667707] pci 0000:00:1c.1: IO window: disabled [ 0.667714] pci 0000:00:1c.1: MEM window: 0xfe700000-0xfe7fffff [ 0.667719] pci 0000:00:1c.1: PREFETCH window: disabled [ 0.667728] pci 0000:00:1c.4: PCI bridge, secondary bus 0000:0c [ 0.667732] pci 0000:00:1c.4: IO window: 0xc000-0xcfff [ 0.667739] pci 0000:00:1c.4: MEM window: 0xfe400000-0xfe6fffff [ 0.667744] pci 0000:00:1c.4: PREFETCH window: 0x000000f0000000-0x000000f01fffff [ 0.667753] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:02 [ 0.667755] pci 0000:00:1e.0: IO window: disabled [ 0.667762] pci 0000:00:1e.0: MEM window: 0xfe300000-0xfe3fffff [ 0.667768] pci 0000:00:1e.0: PREFETCH window: disabled [ 0.667787] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.667793] pci 0000:00:1c.0: setting latency timer to 64 [ 0.667804] pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 0.667810] pci 0000:00:1c.1: setting latency timer to 64 [ 0.667820] pci 0000:00:1c.4: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.667825] pci 0000:00:1c.4: setting latency timer to 64 [ 0.667834] pci 0000:00:1e.0: setting latency timer to 64 [ 0.667839] bus: 00 index 0 io port: [0x00-0xffff] [ 0.667841] bus: 00 index 1 mmio: [0x000000-0xffffffff] [ 0.667844] bus: 09 index 0 io port: [0xd000-0xdfff] [ 0.667846] bus: 09 index 1 mmio: [0xfe800000-0xfe8fffff] [ 0.667848] bus: 09 index 2 mmio: [0x0-0x0] [ 0.667850] bus: 09 index 3 mmio: [0x0-0x0] [ 0.667852] bus: 0b index 0 mmio: [0x0-0x0] [ 0.667854] bus: 0b index 1 mmio: [0xfe700000-0xfe7fffff] [ 0.667856] bus: 0b index 2 mmio: [0x0-0x0] [ 0.667858] bus: 0b index 3 mmio: [0x0-0x0] [ 0.667860] bus: 0c index 0 io port: [0xc000-0xcfff] [ 0.667862] bus: 0c index 1 mmio: [0xfe400000-0xfe6fffff] [ 0.667865] bus: 0c index 2 mmio: [0xf0000000-0xf01fffff] [ 0.667867] bus: 0c index 3 mmio: [0x0-0x0] [ 0.667869] bus: 02 index 0 mmio: [0x0-0x0] [ 0.667871] bus: 02 index 1 mmio: [0xfe300000-0xfe3fffff] [ 0.667873] bus: 02 index 2 mmio: [0x0-0x0] [ 0.667875] bus: 02 index 3 io port: [0x00-0xffff] [ 0.667877] bus: 02 index 4 mmio: [0x000000-0xffffffff] [ 0.667886] NET: Registered protocol family 2 [ 0.680052] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.680300] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.680659] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 0.680850] TCP: Hash tables configured (established 131072 bind 65536) [ 0.680852] TCP reno registered [ 0.684069] NET: Registered protocol family 1 [ 0.684193] checking if image is initramfs... it is [ 1.332200] Freeing initrd memory: 7335k freed [ 1.332240] Simple Boot Flag at 0x79 set to 0x1 [ 1.332422] cpufreq: No nForce2 chipset. [ 1.332567] audit: initializing netlink socket (disabled) [ 1.332591] type=2000 audit(1251230890.332:1): initialized [ 1.340365] highmem bounce pool size: 64 pages [ 1.340370] HugeTLB registered 4 MB page size, pre-allocated 0 pages [ 1.341789] VFS: Disk quotas dquot_6.5.1 [ 1.341851] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 1.342499] fuse init (API version 7.10) [ 1.342585] msgmni has been set to 1659 [ 1.342761] alg: No test for stdrng (krng) [ 1.342773] io scheduler noop registered [ 1.342775] io scheduler anticipatory registered [ 1.342778] io scheduler deadline registered [ 1.342791] io scheduler cfq registered (default) [ 1.342803] pci 0000:00:02.0: Boot video device [ 1.344974] pcieport-driver 0000:00:1c.0: setting latency timer to 64 [ 1.345040] pcieport-driver 0000:00:1c.0: found MSI capability [ 1.345081] pcieport-driver 0000:00:1c.0: irq 2303 for MSI/MSI-X [ 1.345099] pci_express 0000:00:1c.0:pcie00: allocate port service [ 1.345114] pci_express 0000:00:1c.0:pcie02: allocate port service [ 1.345127] pci_express 0000:00:1c.0:pcie03: allocate port service [ 1.345208] pcieport-driver 0000:00:1c.1: setting latency timer to 64 [ 1.345263] pcieport-driver 0000:00:1c.1: found MSI capability [ 1.345300] pcieport-driver 0000:00:1c.1: irq 2302 for MSI/MSI-X [ 1.345318] pci_express 0000:00:1c.1:pcie00: allocate port service [ 1.345331] pci_express 0000:00:1c.1:pcie02: allocate port service [ 1.345343] pci_express 0000:00:1c.1:pcie03: allocate port service [ 1.345424] pcieport-driver 0000:00:1c.4: setting latency timer to 64 [ 1.345479] pcieport-driver 0000:00:1c.4: found MSI capability [ 1.345516] pcieport-driver 0000:00:1c.4: irq 2301 for MSI/MSI-X [ 1.345534] pci_express 0000:00:1c.4:pcie00: allocate port service [ 1.345550] pci_express 0000:00:1c.4:pcie02: allocate port service [ 1.345562] pci_express 0000:00:1c.4:pcie03: allocate port service [ 1.345653] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 1.345739] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 1.345882] ACPI: AC Adapter [AC] (on-line) [ 1.376472] ACPI: Battery Slot [BAT0] (battery present) [ 1.376550] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input0 [ 1.377189] ACPI: Lid Switch [LID] [ 1.377235] input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1 [ 1.377242] ACPI: Power Button (CM) [PBTN] [ 1.377285] input: Sleep Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2 [ 1.377287] ACPI: Sleep Button (CM) [SBTN] [ 1.377854] ACPI: SSDT DF66E57A, 0202 (r1 PmRef Cpu0Ist 3000 INTL 20050624) [ 1.378247] ACPI: SSDT DF66DF10, 05E5 (r1 PmRef Cpu0Cst 3001 INTL 20050624) [ 1.378661] Monitor-Mwait will be used to enter C-1 state [ 1.378664] Monitor-Mwait will be used to enter C-2 state [ 1.378667] Monitor-Mwait will be used to enter C-3 state [ 1.378681] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3]) [ 1.378707] processor ACPI_CPU:00: registered as cooling_device0 [ 1.378711] ACPI: Processor [CPU0] (supports 8 throttling states) [ 1.379051] ACPI: SSDT DF66E77C, 00C4 (r1 PmRef Cpu1Ist 3000 INTL 20050624) [ 1.379404] ACPI: SSDT DF66E4F5, 0085 (r1 PmRef Cpu1Cst 3000 INTL 20050624) [ 1.379861] ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3]) [ 1.379881] processor ACPI_CPU:01: registered as cooling_device1 [ 1.379885] ACPI: Processor [CPU1] (supports 8 throttling states) [ 1.381752] thermal LNXTHERM:01: registered as thermal_zone0 [ 1.381964] ACPI: Thermal Zone [THM] (55 C) [ 1.382025] isapnp: Scanning for PnP cards... [ 1.736007] isapnp: No Plug & Play device found [ 1.745181] Serial: 8250/16550 driver4 ports, IRQ sharing enabled [ 1.746278] brd: module loaded [ 1.746598] loop: module loaded [ 1.746665] Fixed MDIO Bus: probed [ 1.746670] PPP generic driver version 2.4.2 [ 1.746732] input: Macintosh mouse button emulation as /devices/virtual/input/input3 [ 1.746761] Driver 'sd' needs updating - please use bus_type methods [ 1.746771] Driver 'sr' needs updating - please use bus_type methods [ 1.746811] ahci 0000:00:1f.2: version 3.0 [ 1.746824] ahci 0000:00:1f.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 1.746866] ahci 0000:00:1f.2: irq 2300 for MSI/MSI-X [ 1.746941] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 3 ports 3 Gbps 0x5 impl SATA mode [ 1.746945] ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ems [ 1.746951] ahci 0000:00:1f.2: setting latency timer to 64 [ 1.747141] scsi0 : ahci [ 1.747234] scsi1 : ahci [ 1.747295] scsi2 : ahci [ 1.747554] ata1: SATA max UDMA/133 abar m2048@0xfe9fb800 port 0xfe9fb900 irq 2300 [ 1.747557] ata2: DUMMY [ 1.747560] ata3: SATA max UDMA/133 abar m2048@0xfe9fb800 port 0xfe9fba00 irq 2300 [ 2.064023] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2.118447] ata1.00: ATA-8: WDC WD2500BEVS-75UST0, 01.01A01, max UDMA/133 [ 2.118450] ata1.00: 488397168 sectors, multi 8: LBA48 NCQ (depth 31/32) [ 2.119309] ata1.00: configured for UDMA/133 [ 2.452020] ata3: SATA link down (SStatus 0 SControl 300) [ 2.468107] scsi 0:0:0:0: Direct-Access ATA WDC WD2500BEVS-7 01.0 PQ: 0 ANSI: 5 [ 2.468207] sd 0:0:0:0: [sda] 488397168 512-byte hardware sectors: (250 GB/232 GiB) [ 2.468224] sd 0:0:0:0: [sda] Write Protect is off [ 2.468226] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 2.468253] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.468315] sd 0:0:0:0: [sda] 488397168 512-byte hardware sectors: (250 GB/232 GiB) [ 2.468330] sd 0:0:0:0: [sda] Write Protect is off [ 2.468333] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 2.468358] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.468362] sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 > [ 2.550198] sd 0:0:0:0: [sda] Attached SCSI disk [ 2.550238] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 2.550290] ata_piix 0000:00:1f.1: version 2.12 [ 2.550298] ata_piix 0000:00:1f.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 2.550335] ata_piix 0000:00:1f.1: setting latency timer to 64 [ 2.550408] scsi3 : ata_piix [ 2.550466] scsi4 : ata_piix [ 2.551176] ata4: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x6fa0 irq 14 [ 2.551178] ata5: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x6fa8 irq 15 [ 2.712497] ata4.00: ATAPI: HL-DT-ST DVD+/-RW GSA-T21N, A102, max UDMA/33 [ 2.728442] ata4.00: configured for UDMA/33 [ 2.730707] ata5: port disabled. ignoring. [ 2.733787] scsi 3:0:0:0: CD-ROM HL-DT-ST DVD+-RW GSA-T21N A102 PQ: 0 ANSI: 5 [ 2.744714] sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray [ 2.744718] Uniform CD-ROM driver Revision: 3.20 [ 2.744805] sr 3:0:0:0: Attached scsi CD-ROM sr0 [ 2.744844] sr 3:0:0:0: Attached scsi generic sg1 type 5 [ 2.745571] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 2.745593] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 22 (level, low) -> IRQ 22 [ 2.745606] ehci_hcd 0000:00:1a.7: setting latency timer to 64 [ 2.745610] ehci_hcd 0000:00:1a.7: EHCI Host Controller [ 2.745667] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1 [ 2.749581] ehci_hcd 0000:00:1a.7: debug port 1 [ 2.749589] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported [ 2.749603] ehci_hcd 0000:00:1a.7: irq 22, io mem 0xfed1c400 [ 2.764009] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00 [ 2.764078] usb usb1: configuration #1 chosen from 1 choice [ 2.764106] hub 1-0:1.0: USB hub found [ 2.764113] hub 1-0:1.0: 4 ports detected [ 2.764222] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 20 (level, low) -> IRQ 20 [ 2.764234] ehci_hcd 0000:00:1d.7: setting latency timer to 64 [ 2.764238] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 2.764282] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2 [ 2.768189] ehci_hcd 0000:00:1d.7: debug port 1 [ 2.768197] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported [ 2.768210] ehci_hcd 0000:00:1d.7: irq 20, io mem 0xfed1c000 [ 2.780009] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 2.780069] usb usb2: configuration #1 chosen from 1 choice [ 2.780095] hub 2-0:1.0: USB hub found [ 2.780101] hub 2-0:1.0: 6 ports detected [ 2.780207] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 2.780227] uhci_hcd: USB Universal Host Controller Interface driver [ 2.780248] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 [ 2.780255] uhci_hcd 0000:00:1a.0: setting latency timer to 64 [ 2.780259] uhci_hcd 0000:00:1a.0: UHCI Host Controller [ 2.780305] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3 [ 2.780333] uhci_hcd 0000:00:1a.0: irq 20, io base 0x00006f20 [ 2.780407] usb usb3: configuration #1 chosen from 1 choice [ 2.780432] hub 3-0:1.0: USB hub found [ 2.780439] hub 3-0:1.0: 2 ports detected [ 2.780530] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 [ 2.780537] uhci_hcd 0000:00:1a.1: setting latency timer to 64 [ 2.780540] uhci_hcd 0000:00:1a.1: UHCI Host Controller [ 2.780587] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4 [ 2.780623] uhci_hcd 0000:00:1a.1: irq 21, io base 0x00006f00 [ 2.780700] usb usb4: configuration #1 chosen from 1 choice [ 2.780725] hub 4-0:1.0: USB hub found [ 2.780732] hub 4-0:1.0: 2 ports detected [ 2.780817] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 [ 2.780825] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [ 2.780828] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 2.780873] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5 [ 2.780900] uhci_hcd 0000:00:1d.0: irq 20, io base 0x00006f80 [ 2.780973] usb usb5: configuration #1 chosen from 1 choice [ 2.780998] hub 5-0:1.0: USB hub found [ 2.781011] hub 5-0:1.0: 2 ports detected [ 2.781098] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 [ 2.781105] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [ 2.781109] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 2.781150] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6 [ 2.781177] uhci_hcd 0000:00:1d.1: irq 21, io base 0x00006f60 [ 2.781250] usb usb6: configuration #1 chosen from 1 choice [ 2.781275] hub 6-0:1.0: USB hub found [ 2.781284] hub 6-0:1.0: 2 ports detected [ 2.781371] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22 [ 2.781378] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [ 2.781382] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 2.781429] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7 [ 2.781457] uhci_hcd 0000:00:1d.2: irq 22, io base 0x00006f40 [ 2.781532] usb usb7: configuration #1 chosen from 1 choice [ 2.781558] hub 7-0:1.0: USB hub found [ 2.781564] hub 7-0:1.0: 2 ports detected [ 2.781709] PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 2.796981] i8042.c: Detected active multiplexing controller, rev 1.1. [ 2.806288] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 2.806293] serio: i8042 AUX0 port at 0x60,0x64 irq 12 [ 2.806296] serio: i8042 AUX1 port at 0x60,0x64 irq 12 [ 2.806299] serio: i8042 AUX2 port at 0x60,0x64 irq 12 [ 2.806301] serio: i8042 AUX3 port at 0x60,0x64 irq 12 [ 2.808040] mice: PS/2 mouse device common for all mice [ 2.824075] rtc_cmos 00:04: RTC can wake from S4 [ 2.824110] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0 [ 2.824143] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs [ 2.824204] device-mapper: uevent: version 1.0.3 [ 2.824291] device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@redhat.com [ 2.824365] device-mapper: multipath: version 1.0.5 loaded [ 2.824368] device-mapper: multipath round-robin: version 1.0.0 loaded [ 2.824445] EISA: Probing bus 0 at eisa.0 [ 2.824453] Cannot allocate resource for EISA slot 1 [ 2.824485] EISA: Detected 0 cards. [ 2.824602] cpuidle: using governor ladder [ 2.824725] cpuidle: using governor menu [ 2.825257] TCP cubic registered [ 2.825357] NET: Registered protocol family 10 [ 2.825803] lo: Disabled Privacy Extensions [ 2.826156] NET: Registered protocol family 17 [ 2.826173] Bluetooth: L2CAP ver 2.11 [ 2.826175] Bluetooth: L2CAP socket layer initialized [ 2.826178] Bluetooth: SCO (Voice Link) ver 0.6 [ 2.826180] Bluetooth: SCO socket layer initialized [ 2.826212] Bluetooth: RFCOMM socket layer initialized [ 2.826218] Bluetooth: RFCOMM TTY layer initialized [ 2.826220] Bluetooth: RFCOMM ver 1.10 [ 2.826226] Marking TSC unstable due to TSC halts in idle [ 2.826832] Using IPI No-Shortcut mode [ 2.826900] registered taskstats version 1 [ 2.827043] Magic number: 5:79:145 [ 2.827081] acpi device:16: hash matches [ 2.827136] rtc_cmos 00:04: setting system clock to 2009-08-25 20:08:12 UTC (1251230892) [ 2.827139] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 2.827141] EDD information not available. [ 2.827426] Freeing unused kernel memory: 532k freed [ 2.827586] Write protecting the kernel text: 4116k [ 2.827647] Write protecting the kernel read-only data: 1528k [ 2.848543] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4 [ 3.102765] sky2 driver version 1.22 [ 3.102822] sky2 0000:09:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 3.102840] sky2 0000:09:00.0: setting latency timer to 64 [ 3.102895] sky2 0000:09:00.0: Yukon-2 FE+ chip revision 0 [ 3.103145] sky2 0000:09:00.0: irq 2299 for MSI/MSI-X [ 3.103922] sky2 eth0: addr 00:21:9b:cd:d4:d5 [ 3.210683] ohci1394 0000:02:09.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 3.263453] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[16] MMIO=[fe3ff800-fe3fffff] Max Packet=[2048] IR/IT contexts=[4/4] [ 3.374637] usb 7-2: new full speed USB device using uhci_hcd and address 2 [ 3.549847] usb 7-2: configuration #1 chosen from 1 choice [ 3.551587] hub 7-2:1.0: USB hub found [ 3.553555] hub 7-2:1.0: 3 ports detected [ 3.849535] usb 7-2.1: new full speed USB device using uhci_hcd and address 3 [ 3.973865] usb 7-2.1: configuration #1 chosen from 1 choice [ 4.000071] Clocksource tsc unstable (delta = -171592976 ns) [ 4.049543] usb 7-2.2: new full speed USB device using uhci_hcd and address 4 [ 4.179646] usb 7-2.2: configuration #1 chosen from 1 choice [ 4.187076] usbcore: registered new interface driver hiddev [ 4.189907] input: Broadcom Corp as /devices/pci0000:00/0000:00:1d.2/usb7/7-2/7-2.2/7-2.2:1.0/input/input5 [ 4.190089] generic-usb 0003:0A5C:4502.0001: input,hidraw0: USB HID v1.11 Keyboard [Broadcom Corp] on usb-0000:00:1d.2-2.2/input0 [ 4.190106] usbcore: registered new interface driver usbhid [ 4.190109] usbhid: v2.6:USB HID core driver [ 4.257540] usb 7-2.3: new full speed USB device using uhci_hcd and address 5 [ 4.386659] usb 7-2.3: configuration #1 chosen from 1 choice [ 4.393952] input: Broadcom Corp as /devices/pci0000:00/0000:00:1d.2/usb7/7-2/7-2.3/7-2.3:1.0/input/input6 [ 4.400150] generic-usb 0003:0A5C:4503.0002: input,hidraw1: USB HID v1.11 Mouse [Broadcom Corp] on usb-0000:00:1d.2-2.3/input0 [ 4.588766] ieee1394: Host added: ID:BUS[0-00:1023] GUID[364fc0002e926470] [ 8.764065] EXT3-fs: INFO: recovery required on readonly filesystem. [ 8.764068] EXT3-fs: write access will be enabled during recovery. [ 10.721090] kjournald starting. Commit interval 5 seconds [ 10.721144] EXT3-fs: recovery complete. [ 10.721681] EXT3-fs: mounted filesystem with ordered data mode. [ 22.543792] udev: starting version 141 [ 23.365893] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2) [ 23.400274] iTCO_vendor_support: vendor-support=0 [ 23.401873] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.05 [ 23.402168] iTCO_wdt: Found a ICH8M TCO device (Version=2, TCOBASE=0x1060) [ 23.402266] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) [ 23.443503] sdhci: Secure Digital Host Controller Interface driver [ 23.443506] sdhci: Copyright(c) Pierre Ossman [ 23.449833] sdhci-pci 0000:02:09.1: SDHCI controller found [1180:0822] (rev 22) [ 23.449858] sdhci-pci 0000:02:09.1: PCI INT B -> GSI 18 (level, low) -> IRQ 18 [ 23.452984] mmc0: SDHCI controller on PCI [0000:02:09.1] using DMA [ 23.454116] ricoh-mmc: Ricoh MMC Controller disabling driver [ 23.454119] ricoh-mmc: Copyright(c) Philip Langdale [ 23.454141] ricoh-mmc: Ricoh MMC controller found at 0000:02:09.2 [1180:0843] (rev 12) [ 23.454160] ricoh-mmc: Controller is now disabled. [ 23.542688] Linux agpgart interface v0.103 [ 23.581393] agpgart-intel 0000:00:00.0: Intel 965GM Chipset [ 23.582020] agpgart-intel 0000:00:00.0: detected 7676K stolen memory [ 23.584986] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xe0000000 [ 23.606933] Bluetooth: Generic Bluetooth USB driver ver 0.3 [ 23.607055] usbcore: registered new interface driver btusb [ 23.820010] input: PC Speaker as /devices/platform/pcspkr/input/input7 [ 23.861544] cfg80211: Calling CRDA to update world regulatory domain [ 23.902180] acpi device:31: registered as cooling_device2 [ 23.902706] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A03:00/device:2e/input/input8 [ 23.912158] ACPI: Video Device [VID] (multi-head: yes rom: no post: no) [ 23.912286] ACPI Warning (nspredef-0357): \_SB_.PCI0.VID2._DOD: Return Package has no elements (empty) [20080926] [ 23.912374] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A03:00/device:33/input/input9 [ 23.915231] ACPI: Video Device [VID2] (multi-head: yes rom: no post: no) [ 24.252059] synaptics was reset on resume, see synaptics_resume_reset if you have trouble on resume [ 24.702825] cfg80211: World regulatory domain updated: [ 24.702829] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 24.702832] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 24.702835] (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 24.702837] (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 24.702840] (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 24.702842] (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 24.890281] iwl3945: Intel(R) PRO/Wireless 3945ABG/BG Network Connection driver for Linux, 1.2.26ks [ 24.890285] iwl3945: Copyright(c) 2003-2008 Intel Corporation [ 24.890400] iwl3945 0000:0b:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 24.890414] iwl3945 0000:0b:00.0: setting latency timer to 64 [ 24.890524] iwl3945: Detected Intel Wireless WiFi Link 3945ABG [ 24.890790] iwl3945 0000:0b:00.0: irq 2298 for MSI/MSI-X [ 24.940543] input: PS/2 Mouse as /devices/platform/i8042/serio2/input/input10 [ 24.946766] iwl3945: Tunable channels: 13 802.11bg, 23 802.11a channels [ 24.947739] phy0: Selected rate control algorithm 'iwl-3945-rs' [ 24.974700] input: AlpsPS/2 ALPS GlidePoint as /devices/platform/i8042/serio2/input/input11 [ 25.087075] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21 [ 25.087162] HDA Intel 0000:00:1b.0: setting latency timer to 64 [ 26.124010] hda_intel: azx_get_response timeout, switching to polling mode: last cmd=0x222f1c00 [ 26.712897] lp: driver loaded but no devices found [ 27.063122] Adding 3542292k swap on /dev/sda7. Priority:-1 extents:1 across:3542292k [ 27.406252] EXT3 FS on sda6, internal journal [ 54.033328] kjournald starting. Commit interval 5 seconds [ 54.033694] EXT3 FS on sda3, internal journal [ 54.033703] EXT3-fs: mounted filesystem with ordered data mode. [ 54.411645] type=1505 audit(1251230944.081:2): operation="profile_load" name="/usr/share/gdm/guest-session/Xsession" name2="default" pid=2319 [ 54.460110] type=1505 audit(1251230944.132:3): operation="profile_load" name="/sbin/dhclient-script" name2="default" pid=2323 [ 54.460212] type=1505 audit(1251230944.132:4): operation="profile_load" name="/sbin/dhclient3" name2="default" pid=2323 [ 54.460253] type=1505 audit(1251230944.132:5): operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" name2="default" pid=2323 [ 54.460294] type=1505 audit(1251230944.132:6): operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" name2="default" pid=2323 [ 54.514765] type=1505 audit(1251230944.184:7): operation="profile_load" name="/usr/bin/freshclam" name2="default" pid=2328 [ 54.648801] type=1505 audit(1251230944.320:8): operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" name2="default" pid=2332 [ 54.648983] type=1505 audit(1251230944.320:9): operation="profile_load" name="/usr/sbin/cupsd" name2="default" pid=2332 [ 54.677842] type=1505 audit(1251230944.348:10): operation="profile_load" name="/usr/sbin/tcpdump" name2="default" pid=2336 [ 54.898009] NET: Registered protocol family 15 [ 54.929505] alg: No test for cipher_null (cipher_null-generic) [ 54.929582] alg: No test for digest_null (digest_null-generic) [ 54.929611] alg: No test for compress_null (compress_null-generic) [ 55.015645] padlock: VIA PadLock Hash Engine not detected. [ 55.090339] padlock: VIA PadLock Hash Engine not detected. [ 55.287490] padlock: VIA PadLock not detected. [ 79.675358] vboxdrv: Trying to deactivate the NMI watchdog permanently... [ 79.675362] vboxdrv: Successfully done. [ 79.675364] vboxdrv: Found 2 processor cores. [ 79.676483] vboxdrv: fAsync=0 offMin=0x1ad offMax=0x11f6 [ 79.676534] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'. [ 79.676537] vboxdrv: Successfully loaded version 2.1.4_OSE (interface 0x000a0009). [ 81.828586] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 81.828589] Bluetooth: BNEP filters: protocol multicast [ 81.857102] Bridge firewalling registered [ 84.096053] ppdev: user-space parallel port driver [ 86.496833] [drm] Initialized drm 1.1.0 20060810 [ 86.513276] pci 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 86.513282] pci 0000:00:02.0: setting latency timer to 64 [ 86.513411] pci 0000:00:02.0: irq 2297 for MSI/MSI-X [ 86.513501] [drm] Initialized i915 1.6.0 20080730 on minor 0 [ 86.515342] [drm:i915_setparam] *ERROR* unknown parameter 4 [ 87.331444] sky2 eth0: enabling interface [ 87.331654] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 87.332412] iwl3945 0000:0b:00.0: firmware: requesting iwlwifi-3945-1.ucode [ 87.460389] Registered led device: iwl-phy0:radio [ 87.460599] Registered led device: iwl-phy0:assoc [ 87.462295] Registered led device: iwl-phy0:RX [ 87.462325] Registered led device: iwl-phy0:TX [ 87.469507] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 88.733717] wlan0: authenticate with AP 00:1b:2f:97:ad:8c [ 88.735555] wlan0: authenticated [ 88.735558] wlan0: associate with AP 00:1b:2f:97:ad:8c [ 88.738049] wlan0: RX AssocResp from 00:1b:2f:97:ad:8c (capab=0x421 status=0 aid=3) [ 88.738052] wlan0: associated [ 88.739659] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 88.743108] wlan0: disassociating by local choice (reason=3) [ 99.024077] wlan0: no IPv6 routers present [ 104.425886] [drm:i915_get_vblank_counter] *ERROR* trying to get vblank count for disabled pipe 0 [ 109.738336] wlan0: deauthenticated [ 248.481672] wlan0: authenticate with AP 00:1b:2f:97:ad:8c [ 248.484909] wlan0: authenticate with AP 00:1b:2f:97:ad:8c [ 248.484934] wlan0: authenticated [ 248.484939] wlan0: associate with AP 00:1b:2f:97:ad:8c [ 248.490837] wlan0: RX ReassocResp from 00:1b:2f:97:ad:8c (capab=0x421 status=0 aid=3) [ 248.490843] wlan0: associated [ 262.176939] tun: Universal TUN/TAP device driver, 1.6 [ 262.176939] tun: (C) 1999-2004 Max Krasnyansky [ 262.180025] tun0: Disabled Privacy Extensions [ 302.515745] [drm:i915_get_vblank_counter] *ERROR* trying to get vblank count for disabled pipe 0 [ 323.952991] PM: Hibernation mode set to 'platform' [ 323.953782] PM: Marking nosave pages: 0000000000002000 - 0000000000006000 [ 323.953788] PM: Marking nosave pages: 0000000000007000 - 0000000000010000 [ 323.953793] PM: Marking nosave pages: 0000000000092000 - 0000000000100000 [ 323.953805] PM: Basic memory bitmaps created [ 323.953808] PM: Syncing filesystems ... done. [ 324.710886] Freezing user space processes ... (elapsed 0.00 seconds) done. [ 324.712403] Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done. [ 324.712479] PM: Shrinking memory... -\|/-\|/-done (102523 pages freed) [ 328.238880] PM: Freed 410092 kbytes in 3.52 seconds (116.50 MB/s) [ 328.242750] btusb_intr_complete: hci0 urb f67ddc00 failed to resubmit (1) [ 328.243735] btusb_bulk_complete: hci0 urb f67dd900 failed to resubmit (2) [ 328.243797] btusb_bulk_complete: hci0 urb f67dd080 failed to resubmit (1) [ 328.493905] sd 0:0:0:0: [sda] Synchronizing SCSI cache [ 328.494535] ricoh-mmc: Suspending. [ 328.494553] ricoh-mmc: Controller is now re-enabled. [ 328.495634] sdhci-pci 0000:02:09.1: PCI INT B disabled [ 328.544249] sky2 eth0: disabling interface [ 328.592563] ata5: port disabled. ignoring. [ 328.592673] ata_piix 0000:00:1f.1: PCI INT A disabled [ 328.592872] ehci_hcd 0000:00:1d.7: PCI INT A disabled [ 328.592926] uhci_hcd 0000:00:1d.2: PCI INT C disabled [ 328.592979] uhci_hcd 0000:00:1d.1: PCI INT B disabled [ 328.593056] uhci_hcd 0000:00:1d.0: PCI INT A disabled [ 328.656180] HDA Intel 0000:00:1b.0: PCI INT A disabled [ 328.672274] ehci_hcd 0000:00:1a.7: PCI INT C disabled [ 328.672329] uhci_hcd 0000:00:1a.1: PCI INT B disabled [ 328.672382] uhci_hcd 0000:00:1a.0: PCI INT A disabled [ 328.672566] hibernation debug: Waiting for 5 seconds. [ 333.669052] pci 0000:00:02.0: setting latency timer to 64 [ 333.669089] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 [ 333.669097] uhci_hcd 0000:00:1a.0: setting latency timer to 64 [ 333.669147] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 [ 333.669154] uhci_hcd 0000:00:1a.1: setting latency timer to 64 [ 333.669204] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 22 (level, low) -> IRQ 22 [ 333.669211] ehci_hcd 0000:00:1a.7: setting latency timer to 64 [ 333.684280] HDA Intel 0000:00:1b.0: restoring config space at offset 0xf (was 0x100, writing 0x109) [ 333.684312] HDA Intel 0000:00:1b.0: restoring config space at offset 0x4 (was 0x4, writing 0xfe9fc004) [ 333.684322] HDA Intel 0000:00:1b.0: restoring config space at offset 0x3 (was 0x0, writing 0x10) [ 333.684333] HDA Intel 0000:00:1b.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100102) [ 333.684366] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21 [ 333.684377] HDA Intel 0000:00:1b.0: setting latency timer to 64 [ 333.684508] pcieport-driver 0000:00:1c.0: setting latency timer to 64 [ 333.684555] pcieport-driver 0000:00:1c.1: restoring config space at offset 0x7 (was 0x200000f0, writing 0xf0) [ 333.684628] pcieport-driver 0000:00:1c.1: setting latency timer to 64 [ 333.684740] pcieport-driver 0000:00:1c.4: setting latency timer to 64 [ 333.684754] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 [ 333.684764] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [ 333.684826] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 [ 333.684837] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [ 333.684898] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22 [ 333.684909] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [ 333.684971] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 20 (level, low) -> IRQ 20 [ 333.684982] ehci_hcd 0000:00:1d.7: setting latency timer to 64 [ 333.685127] pci 0000:00:1e.0: setting latency timer to 64 [ 333.685235] ata_piix 0000:00:1f.1: restoring config space at offset 0x1 (was 0x2880001, writing 0x2880005) [ 333.685252] ata_piix 0000:00:1f.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 333.685260] ata_piix 0000:00:1f.1: setting latency timer to 64 [ 333.685337] ata5: port disabled. ignoring. [ 333.685360] ata4.00: _GTF evaluation failed (AE 0x1001) [ 333.685560] ahci 0000:00:1f.2: restoring config space at offset 0x1 (was 0x2b00403, writing 0x2b00407) [ 333.685618] ahci 0000:00:1f.2: setting latency timer to 64 [ 333.700231] sky2 0000:09:00.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100507) [ 333.703040] sky2 eth0: enabling interface [ 333.716196] iwl3945 0000:0b:00.0: enabling device (0000 -> 0002) [ 333.716283] iwl3945 0000:0b:00.0: restoring config space at offset 0xf (was 0x100, writing 0x10b) [ 333.716361] iwl3945 0000:0b:00.0: restoring config space at offset 0x4 (was 0x0, writing 0xfe7ff000) [ 333.716390] iwl3945 0000:0b:00.0: restoring config space at offset 0x1 (was 0x100002, writing 0x100506) [ 333.748186] ohci1394 0000:02:09.0: restoring config space at offset 0x4 (was 0x0, writing 0xfe3ff800) [ 333.748197] ohci1394 0000:02:09.0: restoring config space at offset 0x3 (was 0x800000, writing 0x804010) [ 333.748209] ohci1394 0000:02:09.0: restoring config space at offset 0x1 (was 0x2100000, writing 0x2100106) [ 333.800855] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[16] MMIO=[fe3ff800-fe3fffff] Max Packet=[2048] IR/IT contexts=[4/4] [ 333.821461] sdhci-pci 0000:02:09.1: restoring config space at offset 0x4 (was 0x0, writing 0xfe3ff400) [ 333.821504] sdhci-pci 0000:02:09.1: restoring config space at offset 0x3 (was 0x800000, writing 0x804010) [ 333.821561] sdhci-pci 0000:02:09.1: restoring config space at offset 0x1 (was 0x2100000, writing 0x2100106) [ 333.821698] sdhci-pci 0000:02:09.1: PCI INT B -> GSI 18 (level, low) -> IRQ 18 [ 333.821783] ricoh-mmc: Resuming. [ 333.821884] ricoh-mmc: Controller is now disabled. [ 333.822931] sd 0:0:0:0: [sda] Starting disk [ 333.826140] Registered led device: iwl-phy0:radio [ 333.826212] Registered led device: iwl-phy0:assoc [ 333.826243] Registered led device: iwl-phy0:RX [ 333.826271] Registered led device: iwl-phy0:TX [ 333.864528] ata4.00: configured for UDMA/33 [ 334.004161] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 334.004935] ata3: SATA link down (SStatus 0 SControl 300) [ 334.034304] ata1.00: configured for UDMA/133 [ 334.049283] sd 0:0:0:0: [sda] 488397168 512-byte hardware sectors: (250 GB/232 GiB) [ 334.049319] sd 0:0:0:0: [sda] Write Protect is off [ 334.049323] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 334.049369] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 334.223480] pci 0000:00:02.0: setting latency timer to 64 [ 334.225195] PM: Image restored successfully. [ 334.254731] Restarting tasks ... done. [ 334.281172] PM: Basic memory bitmaps freed [ 334.920474] synaptics was reset on resume, see synaptics_resume_reset if you have trouble on resume [ 335.619630] input: PS/2 Mouse as /devices/platform/i8042/serio2/input/input12 [ 335.649885] input: AlpsPS/2 ALPS GlidePoint as /devices/platform/i8042/serio2/input/input13 [ 399.180086] CE: hpet increasing min_delta_ns to 15000 nsec [ 441.104078] PM: Hibernation mode set to 'platform' [ 441.104511] PM: Marking nosave pages: 0000000000002000 - 0000000000006000 [ 441.104516] PM: Marking nosave pages: 0000000000007000 - 0000000000010000 [ 441.104522] PM: Marking nosave pages: 0000000000092000 - 0000000000100000 [ 441.104534] PM: Basic memory bitmaps created [ 441.104537] PM: Syncing filesystems ... done. [ 441.225813] Freezing user space processes ... (elapsed 0.00 seconds) done. [ 441.227295] Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done. [ 441.227371] PM: Shrinking memory... -\done (5849 pages freed) [ 443.120657] PM: Freed 23396 kbytes in 1.89 seconds (12.37 MB/s) [ 443.124167] btusb_intr_complete: hci0 urb f60b9700 failed to resubmit (1) [ 443.125170] btusb_bulk_complete: hci0 urb f60b9880 failed to resubmit (2) [ 443.125226] btusb_bulk_complete: hci0 urb f60b9780 failed to resubmit (1) [ 443.378407] sd 0:0:0:0: [sda] Synchronizing SCSI cache [ 443.378978] ricoh-mmc: Suspending. [ 443.378996] ricoh-mmc: Controller is now re-enabled. [ 443.380127] sdhci-pci 0000:02:09.1: PCI INT B disabled [ 443.432270] sky2 eth0: disabling interface [ 443.480606] ata5: port disabled. ignoring. [ 443.480685] ata_piix 0000:00:1f.1: PCI INT A disabled [ 443.480882] ehci_hcd 0000:00:1d.7: PCI INT A disabled [ 443.480936] uhci_hcd 0000:00:1d.2: PCI INT C disabled [ 443.480989] uhci_hcd 0000:00:1d.1: PCI INT B disabled [ 443.481042] uhci_hcd 0000:00:1d.0: PCI INT A disabled [ 443.481286] HDA Intel 0000:00:1b.0: PCI INT A disabled [ 443.496315] ehci_hcd 0000:00:1a.7: PCI INT C disabled [ 443.496369] uhci_hcd 0000:00:1a.1: PCI INT B disabled [ 443.496422] uhci_hcd 0000:00:1a.0: PCI INT A disabled [ 443.500379] ACPI: Preparing to enter system sleep state S4 [ 443.502492] Disabling non-boot CPUs ... [ 443.504985] CPU 1 is now offline [ 443.504990] SMP alternatives: switching to UP code [ 443.696284] CPU0 attaching NULL sched-domain. [ 443.696288] CPU1 attaching NULL sched-domain. [ 443.696535] CPU0 attaching NULL sched-domain. [ 443.696679] CPU1 is down [ 443.696767] Extended CMOS year: 2000 [ 443.696866] hibernation debug: Waiting for 5 seconds. [ 443.700521] Extended CMOS year: 2000 [ 443.700521] Enabling non-boot CPUs ... [ 443.700521] SMP alternatives: switching to SMP code [ 443.846905] Booting processor 1 APIC 0x1 ip 0x6000 [ 443.696167] Initializing CPU#1 [ 443.696167] Calibrating delay using timer specific routine.. 3657.69 BogoMIPS (lpj=7315384) [ 443.696167] CPU: L1 I cache: 32K, L1 D cache: 32K [ 443.696167] CPU: L2 cache: 2048K [ 443.696167] CPU: Physical Processor ID: 0 [ 443.696167] CPU: Processor Core ID: 1 [ 443.936431] CPU1: Intel(R) Core(TM)2 Duo CPU T5550 @ 1.83GHz stepping 0d [ 443.936807] CPU0 attaching NULL sched-domain. [ 443.937016] Switched to high resolution mode on CPU 1 [ 443.940024] CPU0 attaching sched-domain: [ 443.940027] domain 0: span 0-1 level MC [ 443.940030] groups: 0 1 [ 443.940035] CPU1 attaching sched-domain: [ 443.940037] domain 0: span 0-1 level MC [ 443.940040] groups: 1 0 [ 443.940527] CPU1 is up [ 443.940530] ACPI: Waking up from system sleep state S4 [ 443.988272] pci 0000:00:02.0: setting latency timer to 64 [ 443.988303] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 [ 443.988311] uhci_hcd 0000:00:1a.0: setting latency timer to 64 [ 443.988361] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 [ 443.988368] uhci_hcd 0000:00:1a.1: setting latency timer to 64 [ 443.988417] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 22 (level, low) -> IRQ 22 [ 443.988425] ehci_hcd 0000:00:1a.7: setting latency timer to 64 [ 444.004290] HDA Intel 0000:00:1b.0: restoring config space at offset 0xf (was 0x100, writing 0x109) [ 444.004321] HDA Intel 0000:00:1b.0: restoring config space at offset 0x4 (was 0x4, writing 0xfe9fc004) [ 444.004330] HDA Intel 0000:00:1b.0: restoring config space at offset 0x3 (was 0x0, writing 0x10) [ 444.004342] HDA Intel 0000:00:1b.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100102) [ 444.004373] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21 [ 444.004384] HDA Intel 0000:00:1b.0: setting latency timer to 64 [ 444.004508] pcieport-driver 0000:00:1c.0: setting latency timer to 64 [ 444.004596] pcieport-driver 0000:00:1c.1: setting latency timer to 64 [ 444.004684] pcieport-driver 0000:00:1c.4: setting latency timer to 64 [ 444.004693] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 [ 444.004701] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [ 444.004750] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 [ 444.004757] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [ 444.004806] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22 [ 444.004814] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [ 444.004862] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 20 (level, low) -> IRQ 20 [ 444.004870] ehci_hcd 0000:00:1d.7: setting latency timer to 64 [ 444.004974] pci 0000:00:1e.0: setting latency timer to 64 [ 444.005090] ata_piix 0000:00:1f.1: restoring config space at offset 0x1 (was 0x2880001, writing 0x2880005) [ 444.005102] ata_piix 0000:00:1f.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 444.005108] ata_piix 0000:00:1f.1: setting latency timer to 64 [ 444.005156] ata4.00: _GTF evaluation failed (AE 0x1001) [ 444.005180] ahci 0000:00:1f.2: restoring config space at offset 0x1 (was 0x2b00403, writing 0x2b00407) [ 444.005279] ahci 0000:00:1f.2: setting latency timer to 64 [ 444.005380] ata5: port disabled. ignoring. [ 444.020319] sky2 0000:09:00.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100507) [ 444.023072] sky2 eth0: enabling interface [ 444.036283] iwl3945 0000:0b:00.0: enabling device (0000 -> 0002) [ 444.036367] iwl3945 0000:0b:00.0: restoring config space at offset 0xf (was 0x100, writing 0x10b) [ 444.036446] iwl3945 0000:0b:00.0: restoring config space at offset 0x4 (was 0x0, writing 0xfe7ff000) [ 444.036479] iwl3945 0000:0b:00.0: restoring config space at offset 0x1 (was 0x100002, writing 0x100506) [ 444.068275] ohci1394 0000:02:09.0: restoring config space at offset 0x4 (was 0x0, writing 0xfe3ff800) [ 444.068284] ohci1394 0000:02:09.0: restoring config space at offset 0x3 (was 0x800000, writing 0x804010) [ 444.068296] ohci1394 0000:02:09.0: restoring config space at offset 0x1 (was 0x2100000, writing 0x2100106) [ 444.097946] Registered led device: iwl-phy0:radio [ 444.097965] Registered led device: iwl-phy0:assoc [ 444.098018] Registered led device: iwl-phy0:RX [ 444.098034] Registered led device: iwl-phy0:TX [ 444.120917] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[16] MMIO=[fe3ff800-fe3fffff] Max Packet=[2048] IR/IT contexts=[4/4] [ 444.140271] sdhci-pci 0000:02:09.1: restoring config space at offset 0x4 (was 0x0, writing 0xfe3ff400) [ 444.140281] sdhci-pci 0000:02:09.1: restoring config space at offset 0x3 (was 0x800000, writing 0x804010) [ 444.140293] sdhci-pci 0000:02:09.1: restoring config space at offset 0x1 (was 0x2100000, writing 0x2100106) [ 444.140322] sdhci-pci 0000:02:09.1: PCI INT B -> GSI 18 (level, low) -> IRQ 18 [ 444.141340] ricoh-mmc: Resuming. [ 444.141352] ricoh-mmc: Controller is now disabled. [ 444.141579] sd 0:0:0:0: [sda] Starting disk [ 444.186866] ata4.00: configured for UDMA/33 [ 444.325218] ata3: SATA link down (SStatus 0 SControl 300) [ 444.325253] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 444.372373] ata1.00: configured for UDMA/133 [ 444.384235] sd 0:0:0:0: [sda] 488397168 512-byte hardware sectors: (250 GB/232 GiB) [ 444.384270] sd 0:0:0:0: [sda] Write Protect is off [ 444.384275] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 444.384323] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 444.560460] pci 0000:00:02.0: setting latency timer to 64 [ 444.562197] PM: Image restored successfully. [ 444.591725] Restarting tasks ... done. [ 444.621119] PM: Basic memory bitmaps freed [ 445.252067] synaptics was reset on resume, see synaptics_resume_reset if you have trouble on resume