Attempted a update-manager -d upgrade. Upgrade seemed to complete without errors, after reboot was able to login and the desktop loaded but after about 30 seconds the system completely froze, mouse and keyboard were unresponsive.
Then tried to do a fresh install with the Alternate install cd. made it to the login screen and after clicking on user the system froze.
Only way to recover was a hard shutdown ( power button ).
#lspci
00:00.0 Host bridge: Intel Corporation 82865G/PE/P DRAM Controller/Host-Hub Interface (rev 02)
00:02.0 VGA compatible controller: Intel Corporation 82865G Integrated Graphics Controller (rev 02)
00:1d.0 USB Controller: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #1 (rev 02)
00:1d.1 USB Controller: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #2 (rev 02)
00:1d.2 USB Controller: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #3 (rev 02)
00:1d.3 USB Controller: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #4 (rev 02)
00:1d.7 USB Controller: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB2 EHCI Controller (rev 02)
00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev c2)
00:1f.0 ISA bridge: Intel Corporation 82801EB/ER (ICH5/ICH5R) LPC Interface Bridge (rev 02)
00:1f.1 IDE interface: Intel Corporation 82801EB/ER (ICH5/ICH5R) IDE Controller (rev 02)
00:1f.3 SMBus: Intel Corporation 82801EB/ER (ICH5/ICH5R) SMBus Controller (rev 02)
00:1f.5 Multimedia audio controller: Intel Corporation 82801EB/ER (ICH5/ICH5R) AC'97 Audio Controller (rev 02)
01:08.0 Ethernet controller: Intel Corporation 82562EZ 10/100 Ethernet Controller (rev 02)
01:0a.0 Multimedia video controller: Brooktree Corporation Bt878 Video Capture (rev 11)
01:0a.1 Multimedia controller: Brooktree Corporation Bt878 Audio Capture (rev 11)
#dmesg from fresh install of jaunty
[ 0.000000] BIOS EBDA/lowmem at: 0009fc00/0009fc00
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.28-15-generic (buildd@palmer) (gcc version 4.3.3 (Ubuntu 4.3.3-5ubuntu4) ) #49-Ubuntu SMP Tu
e Aug 18 18:40:08 UTC 2009 (Ubuntu 2.6.28-15.49-generic)
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] NSC Geode by NSC
[ 0.000000] Cyrix CyrixInstead
[ 0.000000] Centaur CentaurHauls
[ 0.000000] Transmeta GenuineTMx86
[ 0.000000] Transmeta TransmetaCPU
[ 0.000000] UMC UMC UMC UMC
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e8000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000003df30000 (usable)
[ 0.000000] BIOS-e820: 000000003df30000 - 000000003df40000 (ACPI data)
[ 0.000000] BIOS-e820: 000000003df40000 - 000000003dff0000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000003dff0000 - 000000003e000000 (reserved)
[ 0.000000] BIOS-e820: 00000000ffb80000 - 0000000100000000 (reserved)
[ 0.000000] DMI 2.3 present.
[ 0.000000] AMI BIOS detected: BIOS may corrupt low RAM, working it around.
[ 0.000000] last_pfn = 0x3df30 max_arch_pfn = 0x100000
[ 0.000000] Scanning 0 areas for low memory corruption
[ 0.000000] modified physical RAM map:
[ 0.000000] modified: 0000000000000000 - 0000000000010000 (reserved)
[ 0.000000] modified: 0000000000010000 - 000000000009fc00 (usable)
[ 0.000000] modified: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] modified: 00000000000e8000 - 0000000000100000 (reserved)
[ 0.000000] modified: 0000000000100000 - 000000003df30000 (usable)
[ 0.000000] modified: 000000003df30000 - 000000003df40000 (ACPI data)
[ 0.000000] modified: 000000003df40000 - 000000003dff0000 (ACPI NVS)
[ 0.000000] modified: 000000003dff0000 - 000000003e000000 (reserved)
[ 0.000000] modified: 00000000ffb80000 - 0000000100000000 (reserved)
[ 0.000000] kernel direct mapping tables up to 373fe000 @ 10000-16000
[ 0.000000] RAMDISK: 378ba000 - 37fefdb4
[ 0.000000] Allocated new RAMDISK: 0087d000 - 00fb2db4
[ 0.000000] Move RAMDISK from 00000000378ba000 - 0000000037fefdb3 to 0087d000 - 00fb2db3
[ 0.000000] ACPI: RSDP 000FAD60, 0014 (r0 ACPIAM)
[ 0.000000] ACPI: RSDT 3DF30000, 0030 (r1 A M I OEMRSDT 2000522 MSFT 97)
[ 0.000000] ACPI: FACP 3DF30200, 0081 (r1 A M I OEMFACP 2000522 MSFT 97)
[ 0.000000] ACPI: DSDT 3DF303F0, 36A7 (r1 PPVM1 PPVM1911 911 INTL 2002026)
[ 0.000000] ACPI: FACS 3DF40000, 0040
[ 0.000000] ACPI: APIC 3DF30390, 005C (r1 A M I OEMAPIC 2000522 MSFT 97)
[ 0.000000] ACPI: OEMB 3DF40040, 003F (r1 A M I OEMBIOS 2000522 MSFT 97)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] 107MB HIGHMEM available.
[ 0.000000] 883MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 373fe000
[ 0.000000] low ram: 00000000 - 373fe000
[ 0.000000] bootmap 00012000 - 00018e80
[ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 00373fe000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
[ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000]
[ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000]
[ 0.000000] #3 [0000100000 - 00008780ac] TEXT DATA BSS ==> [0000100000 - 00008780ac]
[ 0.000000] #4 [0000879000 - 000087d000] INIT_PG_TABLE ==> [0000879000 - 000087d000]
[ 0.000000] #5 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 0000100000]
[ 0.000000] #6 [0000010000 - 0000012000] PGTABLE ==> [0000010000 - 0000012000]
[ 0.000000] #7 [000087d000 - 0000fb2db4] NEW RAMDISK ==> [000087d000 - 0000fb2db4]
[ 0.000000] #8 [0000012000 - 0000019000] BOOTMAP ==> [0000012000 - 0000019000]
[ 0.000000] found SMP MP-table at [c00ff780] 000ff780
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x000373fe
[ 0.000000] HighMem 0x000373fe -> 0x0003df30
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x0003df30
[ 0.000000] On node 0 totalpages: 253631
[ 0.000000] free_area_init_node: node 0, pgdat c06cb500, node_mem_map c1000200
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3951 pages, LIFO batch:0
[ 0.000000] Normal zone: 1736 pages used for memmap
[ 0.000000] Normal zone: 220470 pages, LIFO batch:31
[ 0.000000] HighMem zone: 215 pages used for memmap
[ 0.000000] HighMem zone: 27227 pages, LIFO batch:7
[ 0.000000] Movable zone: 0 pages used for memmap
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x81] disabled)
[ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] SMP: Allowing 2 CPUs, 1 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e8000
[ 0.000000] PM: Registered nosave memory: 00000000000e8000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at 40000000 (gap: 3e000000:c1b80000)
[ 0.000000] PERCPU: Allocating 45056 bytes of per cpu data
[ 0.000000] NR_CPUS: 64, nr_cpu_ids: 2, nr_node_ids 1
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 251648
[ 0.000000] Kernel command line: root=UUID=c6dd9683-ccbd-4fa3-b802-8ced38b70637 ro quiet splash
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes)
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 2394.056 MHz processor.
[ 0.004000] Console: colour VGA+ 80x25
[ 0.004000] console [tty0] enabled
[ 0.004000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.004000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.004000] allocated 5074560 bytes of page_cgroup
[ 0.004000] please try cgroup_disable=memory option if you don't want
[ 0.004000] Scanning for low memory corruption every 60 seconds
[ 0.004000] Memory: 985352k/1014976k available (4115k kernel code, 28868k reserved, 2199k data, 532k init, 109768k highmem)
[ 0.004000] virtual kernel memory layout:
[ 0.004000] fixmap : 0xffc77000 - 0xfffff000 (3616 kB)
[ 0.004000] pkmap : 0xff400000 - 0xff800000 (4096 kB)
[ 0.004000] vmalloc : 0xf7bfe000 - 0xff3fe000 ( 120 MB)
[ 0.004000] lowmem : 0xc0000000 - 0xf73fe000 ( 883 MB)
[ 0.004000] .init : 0xc0733000 - 0xc07b8000 ( 532 kB)
[ 0.004000] .data : 0xc0504f5f - 0xc072ae60 (2199 kB)
[ 0.004000] .text : 0xc0100000 - 0xc0504f5f (4115 kB)
[ 0.004000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.004000] SLUB: Genslabs=12, HWalign=128, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.004012] Calibrating delay loop (skipped), value calculated using timer frequency.. 4788.11 BogoMIPS (lpj=9576224)
[ 0.004037] Security Framework initialized
[ 0.004046] SELinux: Disabled at boot.
[ 0.004070] AppArmor: AppArmor initialized
[ 0.004084] Mount-cache hash table entries: 512
[ 0.004273] Initializing cgroup subsys ns
[ 0.004279] Initializing cgroup subsys cpuacct
[ 0.004283] Initializing cgroup subsys memory
[ 0.004289] Initializing cgroup subsys freezer
[ 0.004312] CPU: Trace cache: 12K uops, L1 D cache: 16K
[ 0.004316] CPU: L2 cache: 1024K
[ 0.004320] CPU: Hyper-Threading is disabled
[ 0.004326] using mwait in idle threads.
[ 0.004342] Checking 'hlt' instruction... OK.
[ 0.021056] SMP alternatives: switching to UP code
[ 0.176022] ACPI: Core revision 20080926
[ 0.182280] ACPI: Checking initramfs for custom DSDT
[ 0.540482] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.582030] CPU0: Intel(R) Pentium(R) 4 CPU 2.40GHz stepping 01
[ 0.584002] APIC calibration not consistent with PM Timer: 380ms instead of 100ms
[ 0.584002] APIC delta adjusted to PM-Timer: 831249 (3158930)
[ 0.584002] Brought up 1 CPUs
[ 0.584002] Total of 1 processors activated (4788.11 BogoMIPS).
[ 0.584002] CPU0 attaching NULL sched-domain.
[ 0.584002] net_namespace: 776 bytes
[ 0.584002] Booting paravirtualized kernel on bare hardware
[ 0.584002] Time: 12:16:20 Date: 08/22/09
[ 0.584002] regulator: core version 0.5
[ 0.584002] NET: Registered protocol family 16
[ 0.584002] EISA bus registered
[ 0.584002] ACPI: bus type pci registered
[ 0.584002] PCI: PCI BIOS revision 2.10 entry at 0xf0031, last bus=1
[ 0.584002] PCI: Using configuration type 1 for base access
[ 0.584002] ACPI: EC: Look up EC in DSDT
[ 0.593390] ACPI: Interpreter enabled
[ 0.593401] ACPI: (supports S0 S1 S3 S4 S5)
[ 0.593433] ACPI: Using IOAPIC for interrupt routing
[ 0.603920] ACPI: No dock devices found.
[ 0.603939] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.604016] pci 0000:00:00.0: reg 10 32bit mmio: [0xfe800000-0xfebfffff]
[ 0.604093] pci 0000:00:02.0: reg 10 32bit mmio: [0xf0000000-0xf7ffffff]
[ 0.604101] pci 0000:00:02.0: reg 14 32bit mmio: [0xfe780000-0xfe7fffff]
[ 0.604109] pci 0000:00:02.0: reg 18 io port: [0xefe0-0xefe7]
[ 0.604217] pci 0000:00:1d.0: reg 20 io port: [0xef00-0xef1f]
[ 0.604275] pci 0000:00:1d.1: reg 20 io port: [0xef20-0xef3f]
[ 0.604333] pci 0000:00:1d.2: reg 20 io port: [0xef40-0xef5f]
[ 0.604391] pci 0000:00:1d.3: reg 20 io port: [0xef80-0xef9f]
[ 0.604457] pci 0000:00:1d.7: reg 10 32bit mmio: [0xfe77bc00-0xfe77bfff]
[ 0.604506] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.604512] pci 0000:00:1d.7: PME# disabled
[ 0.604609] pci 0000:00:1f.0: Force enabled HPET at 0xfed00000
[ 0.604616] pci 0000:00:1f.0: quirk: region 0800-087f claimed by ICH4 ACPI/GPIO/TCO
[ 0.604621] pci 0000:00:1f.0: quirk: region 0480-04bf claimed by ICH4 GPIO
[ 0.604645] pci 0000:00:1f.1: reg 10 io port: [0x00-0x07]
[ 0.604653] pci 0000:00:1f.1: reg 14 io port: [0x00-0x03]
[ 0.604661] pci 0000:00:1f.1: reg 18 io port: [0x00-0x07]
[ 0.604671] pci 0000:00:1f.1: reg 1c io port: [0x00-0x03]
[ 0.604679] pci 0000:00:1f.1: reg 20 io port: [0xfc00-0xfc0f]
[ 0.604687] pci 0000:00:1f.1: reg 24 32bit mmio: [0x000000-0x0003ff]
[ 0.604747] pci 0000:00:1f.3: reg 20 io port: [0x400-0x41f]
[ 0.604795] pci 0000:00:1f.5: reg 10 io port: [0xe800-0xe8ff]
[ 0.604802] pci 0000:00:1f.5: reg 14 io port: [0xee80-0xeebf]
[ 0.604810] pci 0000:00:1f.5: reg 18 32bit mmio: [0xfe77b800-0xfe77b9ff]
[ 0.604818] pci 0000:00:1f.5: reg 1c 32bit mmio: [0xfe77b400-0xfe77b4ff]
[ 0.604844] pci 0000:00:1f.5: PME# supported from D0 D3hot D3cold
[ 0.604849] pci 0000:00:1f.5: PME# disabled
[ 0.604903] pci 0000:01:08.0: reg 10 32bit mmio: [0xfe5ff000-0xfe5fffff]
[ 0.604911] pci 0000:01:08.0: reg 14 io port: [0xdf00-0xdf3f]
[ 0.604946] pci 0000:01:08.0: supports D1 D2
[ 0.604949] pci 0000:01:08.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.604954] pci 0000:01:08.0: PME# disabled
[ 0.604998] pci 0000:01:0a.0: reg 10 32bit mmio: [0xee3fe000-0xee3fefff]
[ 0.605080] pci 0000:01:0a.1: reg 10 32bit mmio: [0xee3ff000-0xee3fffff]
[ 0.605161] pci 0000:00:1e.0: transparent bridge
[ 0.605167] pci 0000:00:1e.0: bridge io port: [0xd000-0xdfff]
[ 0.605172] pci 0000:00:1e.0: bridge 32bit mmio: [0xfe500000-0xfe5fffff]
[ 0.605178] pci 0000:00:1e.0: bridge 32bit mmio pref: [0xee300000-0xee3fffff]
[ 0.605189] bus 00 -> node 0
[ 0.605197] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.605440] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT]
[ 0.613881] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[ 0.614047] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[ 0.614211] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[ 0.614373] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[ 0.614535] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[ 0.614698] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[ 0.614859] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 0.615023] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.615184] ACPI Warning (tbutils-0217): Incorrect checksum in table [OEMB] - 14, should be 05 [20080926]
[ 0.615214] ACPI: WMI: Mapper loaded
[ 0.615473] SCSI subsystem initialized
[ 0.615523] libata version 3.00 loaded.
[ 0.615591] usbcore: registered new interface driver usbfs
[ 0.615619] usbcore: registered new interface driver hub
[ 0.615656] usbcore: registered new device driver usb
[ 0.615814] PCI: Using ACPI for IRQ routing
[ 0.615925] Bluetooth: Core ver 2.13
[ 0.616026] NET: Registered protocol family 31
[ 0.616030] Bluetooth: HCI device and connection manager initialized
[ 0.616033] Bluetooth: HCI socket layer initialized
[ 0.616036] NET: Registered protocol family 8
[ 0.616038] NET: Registered protocol family 20
[ 0.616055] NetLabel: Initializing
[ 0.616057] NetLabel: domain hash size = 128
[ 0.616059] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.616077] NetLabel: unlabeled traffic allowed by default
[ 0.616193] hpet clockevent registered
[ 0.616198] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[ 0.616205] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.616211] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[ 0.620088] AppArmor: AppArmor Filesystem Enabled
[ 0.620101] pnp: PnP ACPI init
[ 0.620101] ACPI: bus type pnp registered
[ 0.626625] pnp: PnP ACPI: found 14 devices
[ 0.626629] ACPI: ACPI bus type pnp unregistered
[ 0.626634] PnPBIOS: Disabled by ACPI PNP
[ 0.626652] system 00:0a: ioport range 0x680-0x6ff has been reserved
[ 0.626657] system 00:0a: ioport range 0x290-0x297 has been reserved
[ 0.626667] system 00:0b: ioport range 0x4d0-0x4d1 has been reserved
[ 0.626671] system 00:0b: ioport range 0x800-0x87f has been reserved
[ 0.626675] system 00:0b: ioport range 0x480-0x4bf has been reserved
[ 0.626679] system 00:0b: iomem range 0xfed20000-0xfed8ffff has been reserved
[ 0.626683] system 00:0b: iomem range 0xffb00000-0xffbfffff could not be reserved
[ 0.626692] system 00:0c: iomem range 0xfec00000-0xfec00fff has been reserved
[ 0.626697] system 00:0c: iomem range 0xfee00000-0xfee00fff has been reserved
[ 0.626707] system 00:0d: iomem range 0x0-0x9ffff could not be reserved
[ 0.626712] system 00:0d: iomem range 0xc0000-0xdffff could not be reserved
[ 0.626715] system 00:0d: iomem range 0xe0000-0xfffff could not be reserved
[ 0.626719] system 00:0d: iomem range 0x100000-0x3dfeffff could not be reserved
[ 0.626722] system 00:0d: iomem range 0xfff00000-0xffffffff has been reserved
[ 0.661507] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:01
[ 0.661513] pci 0000:00:1e.0: IO window: 0xd000-0xdfff
[ 0.661520] pci 0000:00:1e.0: MEM window: 0xfe500000-0xfe5fffff
[ 0.661526] pci 0000:00:1e.0: PREFETCH window: 0x000000ee300000-0x000000ee3fffff
[ 0.661543] pci 0000:00:1e.0: setting latency timer to 64
[ 0.661548] bus: 00 index 0 io port: [0x00-0xffff]
[ 0.661551] bus: 00 index 1 mmio: [0x000000-0xffffffff]
[ 0.661554] bus: 01 index 0 io port: [0xd000-0xdfff]
[ 0.661557] bus: 01 index 1 mmio: [0xfe500000-0xfe5fffff]
[ 0.661560] bus: 01 index 2 mmio: [0xee300000-0xee3fffff]
[ 0.661563] bus: 01 index 3 io port: [0x00-0xffff]
[ 0.661566] bus: 01 index 4 mmio: [0x000000-0xffffffff]
[ 0.661575] NET: Registered protocol family 2
[ 0.661744] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.662112] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.662606] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.662940] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.662943] TCP reno registered
[ 0.663137] NET: Registered protocol family 1
[ 0.663324] checking if image is initramfs... it is
[ 1.119988] Switched to high resolution mode on CPU 0
[ 1.398715] Freeing initrd memory: 7383k freed
[ 1.398838] cpufreq: No nForce2 chipset.
[ 1.399017] audit: initializing netlink socket (disabled)
[ 1.399037] type=2000 audit(1250943380.396:1): initialized
[ 1.409185] highmem bounce pool size: 64 pages
[ 1.409194] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 1.410817] VFS: Disk quotas dquot_6.5.1
[ 1.410896] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 1.411744] fuse init (API version 7.10)
[ 1.411859] msgmni has been set to 1725
[ 1.412100] alg: No test for stdrng (krng)
[ 1.412120] io scheduler noop registered
[ 1.412123] io scheduler anticipatory registered
[ 1.412126] io scheduler deadline registered
[ 1.412147] io scheduler cfq registered (default)
[ 1.412164] pci 0000:00:02.0: Boot video device
[ 1.412270] pci 0000:01:08.0: Firmware left e100 interrupts enabled; disabling
[ 1.417999] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 1.418013] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 1.418180] input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[ 1.418185] ACPI: Power Button (FF) [PWRF]
[ 1.418250] input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
[ 1.418254] ACPI: Power Button (CM) [PWRB]
[ 1.418472] processor ACPI_CPU:00: registered as cooling_device0
[ 1.422477] isapnp: Scanning for PnP cards...
[ 1.774227] isapnp: No Plug & Play device found
[ 1.776138] Serial: 8250/16550 driver4 ports, IRQ sharing enabled
[ 1.776243] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.776347] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 1.776754] 00:06: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.776918] 00:07: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 1.778082] brd: module loaded
[ 1.778562] loop: module loaded
[ 1.778671] Fixed MDIO Bus: probed
[ 1.778679] PPP generic driver version 2.4.2
[ 1.778763] input: Macintosh mouse button emulation as /devices/virtual/input/input2
[ 1.778803] Driver 'sd' needs updating - please use bus_type methods
[ 1.778817] Driver 'sr' needs updating - please use bus_type methods
[ 1.778908] ata_piix 0000:00:1f.1: version 2.12
[ 1.778920] ata_piix 0000:00:1f.1: enabling device (0005 -> 0007)
[ 1.778933] ata_piix 0000:00:1f.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 1.778983] ata_piix 0000:00:1f.1: setting latency timer to 64
[ 1.779093] scsi0 : ata_piix
[ 1.779208] scsi1 : ata_piix
[ 1.781557] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xfc00 irq 14
[ 1.781561] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xfc08 irq 15
[ 1.945917] ata1.00: ATA-7: Maxtor 6L120P0, BAH41G10, max UDMA/133
[ 1.945921] ata1.00: 240121728 sectors, multi 16: LBA48
[ 1.961856] ata1.00: configured for UDMA/100
[ 2.124306] ata2.00: ATAPI: TSSTcorpCD/DVDW TS-H552U, US04, max UDMA/33
[ 2.140271] ata2.00: configured for UDMA/33
[ 2.140633] scsi 0:0:0:0: Direct-Access ATA Maxtor 6L120P0 BAH4 PQ: 0 ANSI: 5
[ 2.140773] sd 0:0:0:0: [sda] 240121728 512-byte hardware sectors: (122 GB/114 GiB)
[ 2.140798] sd 0:0:0:0: [sda] Write Protect is off
[ 2.140802] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.140842] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.140933] sd 0:0:0:0: [sda] 240121728 512-byte hardware sectors: (122 GB/114 GiB)
[ 2.140955] sd 0:0:0:0: [sda] Write Protect is off
[ 2.140959] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.140998] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.141003] sda: sda1 sda2 < sda5 sda6 sda7 >
[ 2.190801] sd 0:0:0:0: [sda] Attached SCSI disk
[ 2.190873] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 2.191416] scsi 1:0:0:0: CD-ROM TSSTcorp CD/DVDW TS-H552U US04 PQ: 0 ANSI: 5
[ 2.194658] sr0: scsi3-mmc drive: 1x/48x writer cd/rw xa/form2 cdda tray
[ 2.194663] Uniform CD-ROM driver Revision: 3.20
[ 2.194779] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 2.194838] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 2.195618] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 2.195650] ehci_hcd 0000:00:1d.7: PCI INT D -> GSI 23 (level, low) -> IRQ 23
[ 2.195678] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 2.195683] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 2.195769] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
[ 2.199665] ehci_hcd 0000:00:1d.7: debug port 1
[ 2.199674] ehci_hcd 0000:00:1d.7: cache line size of 128 is not supported
[ 2.199692] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfe77bc00
[ 2.212012] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 2.212110] usb usb1: configuration #1 chosen from 1 choice
[ 2.212154] hub 1-0:1.0: USB hub found
[ 2.212166] hub 1-0:1.0: 8 ports detected
[ 2.212318] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 2.212338] uhci_hcd: USB Universal Host Controller Interface driver
[ 2.212373] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 2.212383] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 2.212387] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 2.212446] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 2.212477] uhci_hcd 0000:00:1d.0: irq 16, io base 0x0000ef00
[ 2.212577] usb usb2: configuration #1 chosen from 1 choice
[ 2.212615] hub 2-0:1.0: USB hub found
[ 2.212628] hub 2-0:1.0: 2 ports detected
[ 2.212739] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 2.212748] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 2.212752] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 2.212812] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[ 2.212843] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000ef20
[ 2.212936] usb usb3: configuration #1 chosen from 1 choice
[ 2.212976] hub 3-0:1.0: USB hub found
[ 2.212986] hub 3-0:1.0: 2 ports detected
[ 2.213097] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 2.213105] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 2.213109] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 2.213167] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[ 2.213198] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000ef40
[ 2.213299] usb usb4: configuration #1 chosen from 1 choice
[ 2.213337] hub 4-0:1.0: USB hub found
[ 2.213348] hub 4-0:1.0: 2 ports detected
[ 2.213465] uhci_hcd 0000:00:1d.3: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 2.213473] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[ 2.213477] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 2.213540] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
[ 2.213564] uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000ef80
[ 2.213660] usb usb5: configuration #1 chosen from 1 choice
[ 2.213700] hub 5-0:1.0: USB hub found
[ 2.213710] hub 5-0:1.0: 2 ports detected
[ 2.213898] PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[ 2.213902] PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[ 2.214651] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 2.214793] mice: PS/2 mouse device common for all mice
[ 2.214981] rtc_cmos 00:02: RTC can wake from S4
[ 2.215029] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[ 2.215056] rtc0: alarms up to one month, 114 bytes nvram, hpet irqs
[ 2.215147] device-mapper: uevent: version 1.0.3
[ 2.215292] device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: <email address hidden>
[ 2.215356] device-mapper: multipath: version 1.0.5 loaded
[ 2.215361] device-mapper: multipath round-robin: version 1.0.0 loaded
[ 2.215457] EISA: Probing bus 0 at eisa.0
[ 2.215499] EISA: Detected 0 cards.
[ 2.215534] cpuidle: using governor ladder
[ 2.215537] cpuidle: using governor menu
[ 2.216269] TCP cubic registered
[ 2.216377] NET: Registered protocol family 10
[ 2.216912] lo: Disabled Privacy Extensions
[ 2.217321] NET: Registered protocol family 17
[ 2.217348] Bluetooth: L2CAP ver 2.11
[ 2.217350] Bluetooth: L2CAP socket layer initialized
[ 2.217354] Bluetooth: SCO (Voice Link) ver 0.6
[ 2.217356] Bluetooth: SCO socket layer initialized
[ 2.217389] Bluetooth: RFCOMM socket layer initialized
[ 2.217398] Bluetooth: RFCOMM TTY layer initialized
[ 2.217400] Bluetooth: RFCOMM ver 1.10
[ 2.217451] Using IPI No-Shortcut mode
[ 2.217560] registered taskstats version 1
[ 2.217683] Magic number: 5:656:279
[ 2.217720] tty tty16: hash matches
[ 2.217767] rtc_cmos 00:02: setting system clock to 2009-08-22 12:16:22 UTC (1250943382)
[ 2.217772] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 2.217774] EDD information not available.
[ 2.218193] Freeing unused kernel memory: 532k freed
[ 2.218335] Write protecting the kernel text: 4116k
[ 2.218385] Write protecting the kernel read-only data: 1528k
[ 2.254928] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[ 2.596026] usb 1-3: new high speed USB device using ehci_hcd and address 3
[ 2.797271] Floppy drive(s): fd0 is 1.44M
[ 2.806102] usb 1-3: configuration #1 chosen from 1 choice
[ 2.815833] FDC 0 is a post-1991 82077
[ 2.934961] e100: Intel(R) PRO/100 Network Driver, 3.5.23-k6-NAPI
[ 2.934966] e100: Copyright(c) 1999-2006 Intel Corporation
[ 2.935024] e100 0000:01:08.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 2.954731] e100 0000:01:08.0: PME# disabled
[ 2.961517] e100: eth0: e100_probe: addr 0xfe5ff000, irq 20, MAC addr 00:13:d4:2e:79:ee
[ 3.064064] usb 2-2: new low speed USB device using uhci_hcd and address 2
[ 3.218453] usb 2-2: configuration #1 chosen from 1 choice
[ 3.411313] usbcore: registered new interface driver hiddev
[ 3.433598] input: HID 413c:3010 as /devices/pci0000:00/0000:00:1d.0/usb2/2-2/2-2:1.0/input/input4
[ 3.456501] generic-usb 0003:413C:3010.0001: input,hidraw0: USB HID v1.00 Mouse [HID 413c:3010] on usb-0000:00:1d.0-2/input0
[ 3.456530] usbcore: registered new interface driver usbhid
[ 3.456536] usbhid: v2.6:USB HID core driver
[ 3.716493] PM: Starting manual resume from disk
[ 3.716499] PM: Resume from partition 8:7
[ 3.716501] PM: Checking hibernation image.
[ 3.716682] PM: Resume from disk failed.
[ 3.722156] EXT4-fs: barriers enabled
[ 3.732660] kjournald2 starting. Commit interval 5 seconds
[ 3.732674] EXT4-fs: delayed allocation enabled
[ 3.732677] EXT4-fs: file extents enabled
[ 3.733830] EXT4-fs: mballoc enabled
[ 3.733836] EXT4-fs: mounted filesystem with ordered data mode.
[ 7.962054] udev: starting version 141
[ 8.169339] parport_pc 00:09: reported by Plug and Play ACPI
[ 8.169387] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
[ 8.201094] Linux agpgart interface v0.103
[ 8.207334] agpgart-intel 0000:00:00.0: Intel 865 Chipset
[ 8.207775] agpgart-intel 0000:00:00.0: detected 32636K stolen memory
[ 8.210125] agpgart-intel 0000:00:00.0: AGP aperture is 128M @ 0xf0000000
[ 8.249055] intel_rng: FWH not detected
[ 8.491763] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 8.511683] Linux video capture interface: v2.00
[ 8.652384] input: PC Speaker as /devices/platform/pcspkr/input/input5
[ 8.746712] iTCO_vendor_support: vendor-support=0
[ 8.748991] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.05
[ 8.749159] iTCO_wdt: Found a ICH5 or ICH5R TCO device (Version=1, TCOBASE=0x0860)
[ 8.749268] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 9.030082] uvcvideo: Found UVC 1.00 device A4 TECH USB2.0 PC Camera J (0ac8:c40a)
[ 9.036059] input: A4 TECH USB2.0 PC Camera J as /devices/pci0000:00/0000:00:1d.7/usb1/1-3/1-3:1.0/input/input6
[ 9.056295] usbcore: registered new interface driver uvcvideo
[ 9.056337] USB Video Class driver (v0.1.0)
[ 9.111672] ppdev: user-space parallel port driver
[ 9.204337] Bt87x 0000:01:0a.1: PCI INT A -> GSI 21 (level, low) -> IRQ 21
[ 9.204734] bt87x0: Using board 1, analog, digital (rate 32000 Hz)
[ 9.352645] bttv: driver version 0.9.17 loaded
[ 9.352650] bttv: using 8 buffers with 2080k (520 pages) each for capture
[ 9.352944] bttv: Bt8xx card found (0).
[ 9.352964] bttv 0000:01:0a.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
[ 9.352976] bttv0: Bt878 (rev 17) at 0000:01:0a.0, irq: 21, latency: 64, mmio: 0xee3fe000
[ 9.353045] bttv0: detected: Hauppauge WinTV [card=10], PCI subsystem ID is 0070:13eb
[ 9.353050] bttv0: using: Hauppauge (bt878) [card=10,autodetected]
[ 9.353082] bttv0: gpio: en=00000000, out=00000000 in=00ffffff [init]
[ 9.355563] bttv0: Hauppauge/Voodoo msp34xx: reset line init [5]
[ 9.379989] tveeprom 0-0050: Hauppauge model 64405, rev C1 , serial# 4069861
[ 9.379993] tveeprom 0-0050: tuner model is Unspecified (idx 2, type 4)
[ 9.380011] tveeprom 0-0050: TV standards UNKNOWN (eeprom 0x01)
[ 9.380014] tveeprom 0-0050: audio processor is None (idx 0)
[ 9.380017] tveeprom 0-0050: has no radio
[ 9.380019] bttv0: Hauppauge eeprom indicates model#64405
[ 9.380022] bttv0: tuner absent
[ 9.380026] bttv0: i2c: checking for MSP34xx @ 0x80... not found
[ 9.383019] bttv0: i2c: checking for TDA9875 @ 0xb0... not found
[ 9.383508] bttv0: i2c: checking for TDA7432 @ 0x8a... not found
[ 9.396482] Intel ICH 0000:00:1f.5: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 9.396536] Intel ICH 0000:00:1f.5: setting latency timer to 64
[ 9.434397] bttv0: registered device video1
[ 9.434477] bttv0: registered device vbi0
[ 9.434499] bttv0: PLL: 28636363 => 35468950 .. ok
[ 9.482126] usbcore: registered new interface driver snd-usb-audio
[ 9.820012] intel8x0_measure_ac97_clock: measured 52050 usecs
[ 9.820017] intel8x0: clocking to 48000
[ 9.993765] lp0: using parport0 (interrupt-driven).
[ 10.103070] Adding 979892k swap on /dev/sda7. Priority:-1 extents:1 across:979892k
[ 10.666951] EXT4 FS on sda1, internal journal on sda1:8
[ 11.741025] type=1505 audit(1250943392.022:2): operation="profile_load" name="/usr/share/gdm/guest-session/Xsession" name2="default" pid=1980
[ 11.804789] type=1505 audit(1250943392.086:3): operation="profile_load" name="/sbin/dhclient-script" name2="default" pid=1984
[ 11.804957] type=1505 audit(1250943392.086:4): operation="profile_load" name="/sbin/dhclient3" name2="default" pid=1984
[ 11.805024] type=1505 audit(1250943392.086:5): operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" name2="default" pid=1984
[ 11.805076] type=1505 audit(1250943392.086:6): operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" name2="default" pid=1984
[ 11.983694] type=1505 audit(1250943392.262:7): operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" name2="default" pid=1989
[ 11.983937] type=1505 audit(1250943392.262:8): operation="profile_load" name="/usr/sbin/cupsd" name2="default" pid=1989
[ 12.022346] type=1505 audit(1250943392.302:9): operation="profile_load" name="/usr/sbin/tcpdump" name2="default" pid=1993
[ 14.191751] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 14.191756] Bluetooth: BNEP filters: protocol multicast
[ 14.217985] Bridge firewalling registered
[ 19.733177] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 19.736135] e100: eth0: e100_watchdog: link up, 100Mbps, full-duplex
[ 19.738644] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 30.576018] eth0: no IPv6 routers present
Can you try updating to the latest 2.6.31-8 Karmic kernel which was released today? I'm curious if you see anything like a kernel oops or panic printed?