[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.24-24-generic (buildd@palmer) (gcc version 4.2.4 (Ubuntu 4.2.4-1ubuntu4)) #1 SMP Tue Jul 7 19:46:39 UTC 2009 (Ubuntu 2.6.24-24.56-generic) [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable) [ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000ce000 - 00000000000d0000 (reserved) [ 0.000000] BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000007fed0000 (usable) [ 0.000000] BIOS-e820: 000000007fed0000 - 000000007fee3000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000007fee3000 - 0000000080000000 (reserved) [ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) [ 0.000000] BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved) [ 0.000000] BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved) [ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved) [ 0.000000] 1150MB HIGHMEM available. [ 0.000000] 896MB LOWMEM available. [ 0.000000] found SMP MP-table at 000f76f0 [ 0.000000] Entering add_active_range(0, 0, 523984) 0 entries of 256 used [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0 -> 4096 [ 0.000000] Normal 4096 -> 229376 [ 0.000000] HighMem 229376 -> 523984 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[1] active PFN ranges [ 0.000000] 0: 0 -> 523984 [ 0.000000] On node 0 totalpages: 523984 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 4064 pages, LIFO batch:0 [ 0.000000] Normal zone: 1760 pages used for memmap [ 0.000000] Normal zone: 223520 pages, LIFO batch:31 [ 0.000000] HighMem zone: 2301 pages used for memmap [ 0.000000] HighMem zone: 292307 pages, LIFO batch:31 [ 0.000000] Movable zone: 0 pages used for memmap [ 0.000000] DMI present. [ 0.000000] ACPI: RSDP signature @ 0xC00F7670 checksum 0 [ 0.000000] ACPI: RSDP 000F7670, 0024 (r2 DELL ) [ 0.000000] ACPI: XSDT 7FED675E, 0094 (r1 DELL M08 6040000 LTP 0) [ 0.000000] ACPI: FACP 7FEDEB60, 00F4 (r3 TOSCPL CRESTLNE 6040000 ALAN 1) [ 0.000000] ACPI: DSDT 7FED7C3B, 6EB1 (r2 TOSCPL CRESTLNE 6040000 INTL 20060608) [ 0.000000] ACPI: FACS 7FEE2FC0, 0040 [ 0.000000] ACPI: APIC 7FEDEC54, 0068 (r1 INTEL CRESTLNE 6040000 LOHR 5A) [ 0.000000] ACPI: HPET 7FEDECBC, 0038 (r1 INTEL CRESTLNE 6040000 LOHR 5A) [ 0.000000] ACPI: MCFG 7FEDECF4, 003C (r1 INTEL CRESTLNE 6040000 LOHR 5A) [ 0.000000] ACPI: TCPA 7FEDED30, 0032 (r1 Intel CRESTLNE 6040000 LOHR 5A) [ 0.000000] ACPI: TMOR 7FEDED62, 0026 (r1 PTLTD 6040000 PTL 3) [ 0.000000] ACPI: OSFR 7FEDED88, 0072 (r1 TOSHIB A+2nd ID 6040000 TASM 4010000) [ 0.000000] ACPI: APIC 7FEDEDFA, 0068 (r1 PTLTD APIC 6040000 LTP 0) [ 0.000000] ACPI: BOOT 7FEDEE62, 0028 (r1 PTLTD $SBFTBL$ 6040000 LTP 1) [ 0.000000] ACPI: SLIC 7FEDEE8A, 0176 (r1 DELL M08 6040000 LTP 0) [ 0.000000] ACPI: SSDT 7FED798E, 02AD (r1 SataRe SataAhci 1000 INTL 20061109) [ 0.000000] ACPI: SSDT 7FED6D7E, 025F (r1 PmRef Cpu0Tst 3000 INTL 20061109) [ 0.000000] ACPI: SSDT 7FED6CD8, 00A6 (r1 PmRef Cpu1Tst 3000 INTL 20061109) [ 0.000000] ACPI: SSDT 7FED67F2, 04E6 (r1 PmRef CpuPm 3000 INTL 20061109) [ 0.000000] ACPI: BIOS bug: multiple APIC/MADT found, using 0 [ 0.000000] ACPI: If "acpi_apic_instance=2" works better, notify linux-acpi@vger.kernel.org [ 0.000000] ACPI: PM-Timer IO Port: 0x1008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] Processor #0 6:15 APIC version 20 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] Processor #1 6:15 APIC version 20 [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] Allocating PCI resources starting at 88000000 (gap: 80000000:60000000) [ 0.000000] swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000 [ 0.000000] swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000ce000 [ 0.000000] swsusp: Registered nosave memory region: 00000000000ce000 - 00000000000d0000 [ 0.000000] swsusp: Registered nosave memory region: 00000000000d0000 - 00000000000dc000 [ 0.000000] swsusp: Registered nosave memory region: 00000000000dc000 - 0000000000100000 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 519891 [ 0.000000] Kernel command line: root=UUID=7e88a341-92d6-46a4-ab7d-ccba90f8e724 ro quiet splash [ 0.000000] mapped APIC to ffffb000 (fee00000) [ 0.000000] mapped IOAPIC to ffffa000 (fec00000) [ 0.000000] Enabling fast FPU save and restore... done. [ 0.000000] Enabling unmasked SIMD FPU exception support... done. [ 0.000000] Initializing CPU#0 [ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes) [ 0.000000] Detected 1995.035 MHz processor. [ 19.727291] Console: colour VGA+ 80x25 [ 19.727293] console [tty0] enabled [ 19.727543] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 19.727789] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 19.801759] Memory: 2065940k/2095936k available (2179k kernel code, 28716k reserved, 1007k data, 368k init, 1178432k highmem) [ 19.801764] virtual kernel memory layout: [ 19.801765] fixmap : 0xfff4b000 - 0xfffff000 ( 720 kB) [ 19.801766] pkmap : 0xff800000 - 0xffc00000 (4096 kB) [ 19.801767] vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB) [ 19.801768] lowmem : 0xc0000000 - 0xf8000000 ( 896 MB) [ 19.801768] .init : 0xc0423000 - 0xc047f000 ( 368 kB) [ 19.801769] .data : 0xc0320de8 - 0xc041cdc4 (1007 kB) [ 19.801770] .text : 0xc0100000 - 0xc0320de8 (2179 kB) [ 19.801773] Checking if this processor honours the WP bit even in supervisor mode... Ok. [ 19.801805] SLUB: Genslabs=11, HWalign=64, Order=0-1, MinObjects=4, CPUs=2, Nodes=1 [ 19.801932] hpet clockevent registered [ 19.881894] Calibrating delay using timer specific routine.. 3994.20 BogoMIPS (lpj=7988413) [ 19.881911] Security Framework initialized [ 19.881916] SELinux: Disabled at boot. [ 19.881927] AppArmor: AppArmor initialized [ 19.881930] Failure registering capabilities with primary security module. [ 19.881936] Mount-cache hash table entries: 512 [ 19.882036] Initializing cgroup subsys ns [ 19.882040] Initializing cgroup subsys cpuacct [ 19.882049] CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000e39d 00000000 00000001 00000001 [ 19.882055] monitor/mwait feature present. [ 19.882056] using mwait in idle threads. [ 19.882059] CPU: L1 I cache: 32K, L1 D cache: 32K [ 19.882061] CPU: L2 cache: 2048K [ 19.882063] CPU: Physical Processor ID: 0 [ 19.882064] CPU: Processor Core ID: 0 [ 19.882066] CPU: After all inits, caps: bfebfbff 20100000 00000000 00043940 0000e39d 00000000 00000001 00000001 [ 19.882073] Compat vDSO mapped to ffffe000. [ 19.882083] Checking 'hlt' instruction... OK. [ 19.898201] SMP alternatives: switching to UP code [ 19.899503] Early unpacking initramfs... done [ 20.161233] ACPI: Core revision 20070126 [ 20.161271] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found. [ 20.168198] CPU0: Intel(R) Core(TM)2 Duo CPU T5870 @ 2.00GHz stepping 0d [ 20.168212] SMP alternatives: switching to SMP code [ 20.168795] Booting processor 1/1 eip 3000 [ 20.178976] Initializing CPU#1 [ 20.257679] Calibrating delay using timer specific routine.. 3990.00 BogoMIPS (lpj=7980009) [ 20.257685] CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000e39d 00000000 00000001 00000001 [ 20.257689] monitor/mwait feature present. [ 20.257692] CPU: L1 I cache: 32K, L1 D cache: 32K [ 20.257694] CPU: L2 cache: 2048K [ 20.257695] CPU: Physical Processor ID: 0 [ 20.257696] CPU: Processor Core ID: 1 [ 20.257698] CPU: After all inits, caps: bfebfbff 20100000 00000000 00043940 0000e39d 00000000 00000001 00000001 [ 20.258182] CPU1: Intel(R) Core(TM)2 Duo CPU T5870 @ 2.00GHz stepping 0d [ 20.258202] Total of 2 processors activated (7984.21 BogoMIPS). [ 20.258375] ENABLING IO-APIC IRQs [ 20.258564] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 20.405692] checking TSC synchronization [CPU#0 -> CPU#1]: passed. [ 20.425697] Brought up 2 CPUs [ 20.425718] CPU0 attaching sched-domain: [ 20.425720] domain 0: span 03 [ 20.425722] groups: 01 02 [ 20.425724] CPU1 attaching sched-domain: [ 20.425726] domain 0: span 03 [ 20.425727] groups: 02 01 [ 20.425907] net_namespace: 64 bytes [ 20.425915] Booting paravirtualized kernel on bare hardware [ 20.426313] Time: 22:30:10 Date: 07/28/09 [ 20.426337] NET: Registered protocol family 16 [ 20.426490] EISA bus registered [ 20.426494] ACPI: bus type pci registered [ 20.426879] PCI: PCI BIOS revision 3.00 entry at 0xfde11, last bus=8 [ 20.426881] PCI: Using configuration type 1 [ 20.426891] Setting up standard PCI resources [ 20.429303] ACPI: EC: Look up EC in DSDT [ 20.435404] ACPI: BIOS _OSI(Linux) query ignored [ 20.435406] ACPI: DMI System Vendor: Dell Inc. [ 20.435407] ACPI: DMI Product Name: Vostro1310 [ 20.435408] ACPI: DMI Product Version: Null [ 20.435409] ACPI: DMI Board Name: 0G930C [ 20.435411] ACPI: DMI BIOS Vendor: Dell Inc. [ 20.435412] ACPI: DMI BIOS Date: 07/10/2008 [ 20.435413] ACPI: Please send DMI info above to linux-acpi@vger.kernel.org [ 20.435415] ACPI: If "acpi_osi=Linux" works better, please notify linux-acpi@vger.kernel.org [ 20.435895] ACPI: Interpreter enabled [ 20.435898] ACPI: (supports S0 S3 S4 S5) [ 20.435910] ACPI: Using IOAPIC for interrupt routing [ 20.440846] ACPI: EC: non-query interrupt received, switching to interrupt mode [ 20.510022] ACPI: EC: GPE = 0x1c, I/O: command/status = 0x66, data = 0x62 [ 20.510024] ACPI: EC: driver started in interrupt mode [ 20.510058] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 20.511011] PCI quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO [ 20.511015] PCI quirk: region 1180-11bf claimed by ICH6 GPIO [ 20.512513] PCI: Transparent bridge - 0000:00:1e.0 [ 20.512566] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 20.512882] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEGP._PRT] [ 20.513004] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT] [ 20.513120] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT] [ 20.513237] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT] [ 20.513354] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP05._PRT] [ 20.513603] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT] [ 20.524577] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 *5 6 7 10 12 14 15) [ 20.524673] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 *11 12 14 15) [ 20.524767] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 *10 12 14 15) [ 20.524860] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 *11 12 14 15) [ 20.524952] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled. [ 20.525049] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 *11 12 14 15) [ 20.525142] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 *10 12 14 15) [ 20.525235] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 11 12 14 15) *10 [ 20.525365] Linux Plug and Play Support v0.97 (c) Adam Belay [ 20.525390] pnp: PnP ACPI init [ 20.525397] ACPI: bus type pnp registered [ 20.561702] pnp: PnP ACPI: found 10 devices [ 20.561704] ACPI: ACPI bus type pnp unregistered [ 20.561706] PnPBIOS: Disabled by ACPI PNP [ 20.561874] PCI: Using ACPI for IRQ routing [ 20.561877] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report [ 20.665557] NET: Registered protocol family 8 [ 20.665558] NET: Registered protocol family 20 [ 20.665585] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 20.665588] hpet0: 3 64-bit timers, 14318180 Hz [ 20.666617] AppArmor: AppArmor Filesystem Enabled [ 20.669453] Time: tsc clocksource has been installed. [ 20.669465] Switched to high resolution mode on CPU 0 [ 20.669551] Switched to high resolution mode on CPU 1 [ 20.678436] system 00:01: iomem range 0xfed1c000-0xfed1ffff could not be reserved [ 20.678439] system 00:01: iomem range 0xfed14000-0xfed17fff could not be reserved [ 20.678441] system 00:01: iomem range 0xfed18000-0xfed18fff could not be reserved [ 20.678444] system 00:01: iomem range 0xfed19000-0xfed19fff could not be reserved [ 20.678446] system 00:01: iomem range 0xe0000000-0xefffffff could not be reserved [ 20.678449] system 00:01: iomem range 0xfed20000-0xfed3ffff could not be reserved [ 20.678451] system 00:01: iomem range 0xfed40000-0xfed44fff could not be reserved [ 20.678453] system 00:01: iomem range 0xfed45000-0xfed8ffff could not be reserved [ 20.678460] system 00:04: iomem range 0xfed00000-0xfed003ff could not be reserved [ 20.678465] system 00:06: ioport range 0x680-0x69f has been reserved [ 20.678467] system 00:06: ioport range 0x800-0x80f has been reserved [ 20.678470] system 00:06: ioport range 0x1000-0x107f has been reserved [ 20.678472] system 00:06: ioport range 0x1180-0x11bf has been reserved [ 20.678474] system 00:06: ioport range 0xfe00-0xfe00 has been reserved [ 20.678476] system 00:06: ioport range 0xff00-0xff7f has been reserved [ 20.708812] PCI: Failed to allocate mem resource #6:20000@e0000000 for 0000:01:00.0 [ 20.708814] PCI: Bridge: 0000:00:01.0 [ 20.708816] IO window: 2000-2fff [ 20.708820] MEM window: c8000000-caffffff [ 20.708822] PREFETCH window: d0000000-dfffffff [ 20.708826] PCI: Bridge: 0000:00:1c.0 [ 20.708828] IO window: 3000-3fff [ 20.708834] MEM window: c0000000-c3ffffff [ 20.708838] PREFETCH window: cc000000-cdffffff [ 20.708844] PCI: Bridge: 0000:00:1c.1 [ 20.708847] IO window: 4000-4fff [ 20.708853] MEM window: f0000000-f3ffffff [ 20.708857] PREFETCH window: fa000000-fbffffff [ 20.708863] PCI: Bridge: 0000:00:1c.3 [ 20.708866] IO window: 5000-5fff [ 20.708871] MEM window: f4000000-f7ffffff [ 20.708876] PREFETCH window: fc000000-fdffffff [ 20.708882] PCI: Bridge: 0000:00:1c.4 [ 20.708885] IO window: 6000-6fff [ 20.708890] MEM window: 88000000-880fffff [ 20.708895] PREFETCH window: f8400000-f84fffff [ 20.708901] PCI: Bridge: 0000:00:1e.0 [ 20.708902] IO window: disabled. [ 20.708908] MEM window: f8000000-f80fffff [ 20.708912] PREFETCH window: disabled. [ 20.708928] ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 20.708933] PCI: Setting latency timer of device 0000:00:01.0 to 64 [ 20.708957] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 17 (level, low) -> IRQ 17 [ 20.708963] PCI: Setting latency timer of device 0000:00:1c.0 to 64 [ 20.708986] ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 16 (level, low) -> IRQ 16 [ 20.708992] PCI: Setting latency timer of device 0000:00:1c.1 to 64 [ 20.709016] ACPI: PCI Interrupt 0000:00:1c.3[D] -> GSI 19 (level, low) -> IRQ 18 [ 20.709021] PCI: Setting latency timer of device 0000:00:1c.3 to 64 [ 20.709045] ACPI: PCI Interrupt 0000:00:1c.4[A] -> GSI 17 (level, low) -> IRQ 17 [ 20.709050] PCI: Setting latency timer of device 0000:00:1c.4 to 64 [ 20.709064] PCI: Setting latency timer of device 0000:00:1e.0 to 64 [ 20.709073] NET: Registered protocol family 2 [ 20.746419] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 20.746609] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 20.746964] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 20.747146] TCP: Hash tables configured (established 131072 bind 65536) [ 20.747148] TCP reno registered [ 20.758473] checking if image is initramfs... it is [ 21.322643] Freeing initrd memory: 7326k freed [ 21.322764] Simple Boot Flag at 0x36 set to 0x1 [ 21.323279] audit: initializing netlink socket (disabled) [ 21.323291] audit(1248820210.324:1): initialized [ 21.323468] highmem bounce pool size: 64 pages [ 21.325064] VFS: Disk quotas dquot_6.5.1 [ 21.325126] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 21.325236] io scheduler noop registered [ 21.325238] io scheduler anticipatory registered [ 21.325239] io scheduler deadline registered [ 21.325248] io scheduler cfq registered (default) [ 21.325393] Boot video device is 0000:01:00.0 [ 21.325486] PCI: Setting latency timer of device 0000:00:01.0 to 64 [ 21.325521] assign_interrupt_mode Found MSI capability [ 21.325549] Allocate Port Service[0000:00:01.0:pcie00] [ 21.325576] Allocate Port Service[0000:00:01.0:pcie02] [ 21.325648] PCI: Setting latency timer of device 0000:00:1c.0 to 64 [ 21.325707] assign_interrupt_mode Found MSI capability [ 21.325754] Allocate Port Service[0000:00:1c.0:pcie00] [ 21.325780] Allocate Port Service[0000:00:1c.0:pcie02] [ 21.325874] PCI: Setting latency timer of device 0000:00:1c.1 to 64 [ 21.325932] assign_interrupt_mode Found MSI capability [ 21.325979] Allocate Port Service[0000:00:1c.1:pcie00] [ 21.326006] Allocate Port Service[0000:00:1c.1:pcie02] [ 21.326100] PCI: Setting latency timer of device 0000:00:1c.3 to 64 [ 21.326158] assign_interrupt_mode Found MSI capability [ 21.326205] Allocate Port Service[0000:00:1c.3:pcie00] [ 21.326233] Allocate Port Service[0000:00:1c.3:pcie02] [ 21.326327] PCI: Setting latency timer of device 0000:00:1c.4 to 64 [ 21.326385] assign_interrupt_mode Found MSI capability [ 21.326432] Allocate Port Service[0000:00:1c.4:pcie00] [ 21.326457] Allocate Port Service[0000:00:1c.4:pcie02] [ 21.326676] isapnp: Scanning for PnP cards... [ 21.680900] isapnp: No Plug & Play device found [ 21.701089] Real Time Clock Driver v1.12ac [ 21.701279] hpet_resources: 0xfed00000 is busy [ 21.701303] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled [ 21.702272] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize [ 21.702325] input: Macintosh mouse button emulation as /devices/virtual/input/input0 [ 21.702403] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 21.737928] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 21.737932] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 21.752855] mice: PS/2 mouse device common for all mice [ 21.752944] EISA: Probing bus 0 at eisa.0 [ 21.752950] Cannot allocate resource for EISA slot 1 [ 21.752952] Cannot allocate resource for EISA slot 2 [ 21.752954] Cannot allocate resource for EISA slot 3 [ 21.752956] Cannot allocate resource for EISA slot 4 [ 21.752957] Cannot allocate resource for EISA slot 5 [ 21.752959] Cannot allocate resource for EISA slot 6 [ 21.752969] EISA: Detected 0 cards. [ 21.752972] cpuidle: using governor ladder [ 21.752973] cpuidle: using governor menu [ 21.753042] NET: Registered protocol family 1 [ 21.753067] Using IPI No-Shortcut mode [ 21.753093] registered taskstats version 1 [ 21.753200] Magic number: 1:922:553 [ 21.753254] hash matches device PNP0C0F:04 [ 21.753262] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 21.753264] EDD information not available. [ 21.753429] Freeing unused kernel memory: 368k freed [ 21.753450] Write protecting the kernel read-only data: 806k [ 21.776022] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1 [ 22.930453] fuse init (API version 7.9) [ 22.945554] ACPI: SSDT 7FED764C, 027A (r1 PmRef Cpu0Ist 3000 INTL 20061109) [ 22.945762] ACPI: SSDT 7FED6FDD, 05EA (r1 PmRef Cpu0Cst 3001 INTL 20061109) [ 22.947467] Monitor-Mwait will be used to enter C-1 state [ 22.947470] Monitor-Mwait will be used to enter C-2 state [ 22.947471] Monitor-Mwait will be used to enter C-3 state [ 22.947573] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3]) [ 22.947577] ACPI: Processor [CPU0] (supports 8 throttling states) [ 22.947780] ACPI: SSDT 7FED78C6, 00C8 (r1 PmRef Cpu1Ist 3000 INTL 20061109) [ 22.947975] ACPI: SSDT 7FED75C7, 0085 (r1 PmRef Cpu1Cst 3000 INTL 20061109) [ 22.948939] ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3]) [ 22.948943] ACPI: Processor [CPU1] (supports 8 throttling states) [ 23.057127] usbcore: registered new interface driver usbfs [ 23.057149] usbcore: registered new interface driver hub [ 23.057436] usbcore: registered new device driver usb [ 23.058627] USB Universal Host Controller Interface driver v3.0 [ 23.058667] ACPI: PCI Interrupt 0000:00:1a.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 23.058677] PCI: Setting latency timer of device 0000:00:1a.0 to 64 [ 23.058681] uhci_hcd 0000:00:1a.0: UHCI Host Controller [ 23.058878] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1 [ 23.058910] uhci_hcd 0000:00:1a.0: irq 16, io base 0x00001800 [ 23.059020] usb usb1: configuration #1 chosen from 1 choice [ 23.059041] hub 1-0:1.0: USB hub found [ 23.059045] hub 1-0:1.0: 2 ports detected [ 23.160771] ACPI: PCI Interrupt 0000:00:1a.1[B] -> GSI 21 (level, low) -> IRQ 19 [ 23.160782] PCI: Setting latency timer of device 0000:00:1a.1 to 64 [ 23.160787] uhci_hcd 0000:00:1a.1: UHCI Host Controller [ 23.160807] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 2 [ 23.160841] uhci_hcd 0000:00:1a.1: irq 19, io base 0x00001820 [ 23.160941] usb usb2: configuration #1 chosen from 1 choice [ 23.160960] hub 2-0:1.0: USB hub found [ 23.160965] hub 2-0:1.0: 2 ports detected [ 23.264011] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 20 [ 23.264021] PCI: Setting latency timer of device 0000:00:1d.0 to 64 [ 23.264026] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 23.264046] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 3 [ 23.264077] uhci_hcd 0000:00:1d.0: irq 20, io base 0x00001840 [ 23.264178] usb usb3: configuration #1 chosen from 1 choice [ 23.264198] hub 3-0:1.0: USB hub found [ 23.264202] hub 3-0:1.0: 2 ports detected [ 23.287418] SCSI subsystem initialized [ 23.316022] libata version 3.00 loaded. [ 23.367967] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 18 [ 23.367977] PCI: Setting latency timer of device 0000:00:1d.1 to 64 [ 23.367982] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 23.368002] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 4 [ 23.368036] uhci_hcd 0000:00:1d.1: irq 18, io base 0x00001860 [ 23.368136] usb usb4: configuration #1 chosen from 1 choice [ 23.368156] hub 4-0:1.0: USB hub found [ 23.368161] hub 4-0:1.0: 2 ports detected [ 23.471916] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 21 [ 23.471927] PCI: Setting latency timer of device 0000:00:1d.2 to 64 [ 23.471931] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 23.471951] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 5 [ 23.471983] uhci_hcd 0000:00:1d.2: irq 21, io base 0x00001880 [ 23.472083] usb usb5: configuration #1 chosen from 1 choice [ 23.472103] hub 5-0:1.0: USB hub found [ 23.472107] hub 5-0:1.0: 2 ports detected [ 23.575983] ACPI: PCI Interrupt 0000:00:1a.7[C] -> GSI 18 (level, low) -> IRQ 21 [ 23.575998] PCI: Setting latency timer of device 0000:00:1a.7 to 64 [ 23.576002] ehci_hcd 0000:00:1a.7: EHCI Host Controller [ 23.576025] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 6 [ 23.579945] ehci_hcd 0000:00:1a.7: debug port 1 [ 23.579951] PCI: cache line size of 32 is not supported by device 0000:00:1a.7 [ 23.579956] ehci_hcd 0000:00:1a.7: irq 21, io mem 0xf8304800 [ 23.595727] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 23.595841] usb usb6: configuration #1 chosen from 1 choice [ 23.595863] hub 6-0:1.0: USB hub found [ 23.595868] hub 6-0:1.0: 4 ports detected [ 23.699795] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 20 [ 23.699814] PCI: Setting latency timer of device 0000:00:1d.7 to 64 [ 23.699819] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 23.699851] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 7 [ 23.703765] ehci_hcd 0000:00:1d.7: debug port 1 [ 23.703771] PCI: cache line size of 32 is not supported by device 0000:00:1d.7 [ 23.703776] ehci_hcd 0000:00:1d.7: irq 20, io mem 0xf8304c00 [ 23.719672] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 23.719818] usb usb7: configuration #1 chosen from 1 choice [ 23.719858] hub 7-0:1.0: USB hub found [ 23.719862] hub 7-0:1.0: 6 ports detected [ 23.824815] ACPI: PCI Interrupt 0000:08:05.0[A] -> GSI 22 (level, low) -> IRQ 22 [ 23.875554] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[22] MMIO=[f8000000-f80007ff] Max Packet=[2048] IR/IT contexts=[8/8] [ 23.884913] r8169 Gigabit Ethernet driver 2.2LK loaded [ 23.884979] ACPI: PCI Interrupt 0000:07:00.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 23.885017] PCI: Setting latency timer of device 0000:07:00.0 to 64 [ 23.885462] eth0: RTL8168c/8111c at 0xf8898000, 00:1c:23:55:05:53, XID 3c2000c0 IRQ 218 [ 23.886993] ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 21 [ 23.887024] PCI: Setting latency timer of device 0000:00:1f.1 to 64 [ 23.887036] ACPI: PCI interrupt for device 0000:00:1f.1 disabled [ 23.888152] ahci 0000:00:1f.2: version 3.0 [ 23.888175] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 18 (level, low) -> IRQ 21 [ 23.987506] usb 6-3: new high speed USB device using ehci_hcd and address 2 [ 23.995510] Clocksource tsc unstable (delta = -5889966263 ns) [ 23.999475] Time: hpet clocksource has been installed. [ 24.163602] usb 6-3: configuration #1 chosen from 1 choice [ 24.347996] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 3 ports 3 Gbps 0x7 impl SATA mode [ 24.348002] ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part [ 24.348010] PCI: Setting latency timer of device 0000:00:1f.2 to 64 [ 24.348270] scsi0 : ahci [ 24.348464] scsi1 : ahci [ 24.348595] scsi2 : ahci [ 24.348678] ata1: SATA max UDMA/133 abar m2048@0xf8304000 port 0xf8304100 irq 217 [ 24.348681] ata2: SATA max UDMA/133 abar m2048@0xf8304000 port 0xf8304180 irq 217 [ 24.348684] ata3: SATA max UDMA/133 abar m2048@0xf8304000 port 0xf8304200 irq 217 [ 24.366385] ieee1394: Host added: ID:BUS[0-00:1023] GUID[0000c010a000b000] [ 24.387561] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 24.682063] ata1.00: ATA-8: WDC WD2500BEVS-75UST0, 01.01A01, max UDMA/133 [ 24.682068] ata1.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 31/32) [ 24.682986] ata1.00: configured for UDMA/133 [ 24.700335] ata2: SATA link down (SStatus 0 SControl 300) [ 24.717288] ata3: SATA link down (SStatus 0 SControl 300) [ 24.717499] scsi 0:0:0:0: Direct-Access ATA WDC WD2500BEVS-7 01.0 PQ: 0 ANSI: 5 [ 24.717779] ata_piix 0000:00:1f.1: version 2.12 [ 24.717795] ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 21 [ 24.717828] PCI: Setting latency timer of device 0000:00:1f.1 to 64 [ 24.717892] scsi3 : ata_piix [ 24.718015] scsi4 : ata_piix [ 24.718514] ata4: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x18a0 irq 14 [ 24.718517] ata5: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x18a8 irq 15 [ 24.723916] Driver 'sd' needs updating - please use bus_type methods [ 24.726050] sd 0:0:0:0: [sda] 488397168 512-byte hardware sectors (250059 MB) [ 24.726067] sd 0:0:0:0: [sda] Write Protect is off [ 24.726070] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 24.726094] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 24.726142] sd 0:0:0:0: [sda] 488397168 512-byte hardware sectors (250059 MB) [ 24.726150] sd 0:0:0:0: [sda] Write Protect is off [ 24.726152] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 24.726166] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 24.726169] sda: sda1 sda2 sda3 sda4 < sda5 sda6 > [ 24.818299] sd 0:0:0:0: [sda] Attached SCSI disk [ 24.822659] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 25.042192] ata4.00: ATAPI: TEAC DVD+/-RW DVW28SLC, A.06, max UDMA/33 [ 25.104340] ata4.00: configured for UDMA/33 [ 25.125950] scsi 3:0:0:0: CD-ROM TEAC DVD+-RW DVW28SLC A.06 PQ: 0 ANSI: 5 [ 25.126056] scsi 3:0:0:0: Attached scsi generic sg1 type 5 [ 25.133448] Driver 'sr' needs updating - please use bus_type methods [ 25.145985] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda caddy [ 25.145990] Uniform CD-ROM driver Revision: 3.20 [ 25.146052] sr 3:0:0:0: Attached scsi CD-ROM sr0 [ 25.205297] Attempting manual resume [ 25.205300] swsusp: Resume From Partition 8:6 [ 25.205301] PM: Checking swsusp image. [ 25.205456] PM: Resume from disk failed. [ 25.250440] kjournald starting. Commit interval 5 seconds [ 25.250475] EXT3-fs: mounted filesystem with ordered data mode. [ 37.149555] ip_tables: (C) 2000-2006 Netfilter Core Team [ 37.193203] nf_conntrack version 0.5.0 (16384 buckets, 65536 max) [ 37.728836] Linux agpgart interface v0.102 [ 37.820082] input: Power Button (FF) as /devices/virtual/input/input2 [ 37.847703] ACPI: Power Button (FF) [PWRF] [ 37.847773] input: Lid Switch as /devices/virtual/input/input3 [ 37.847844] ACPI: Lid Switch [LID0] [ 37.847883] input: Power Button (CM) as /devices/virtual/input/input4 [ 37.879683] ACPI: Power Button (CM) [PWRB] [ 37.879750] input: Sleep Button (CM) as /devices/virtual/input/input5 [ 37.911656] ACPI: Sleep Button (CM) [SLPB] [ 37.987576] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 37.996677] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 38.054253] ACPI: AC Adapter [ACAD] (off-line) [ 38.064215] ACPI: WMI-Acer: Mapper loaded [ 38.178570] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:02/LNXVIDEO:00/input/input6 [ 38.199499] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no) [ 38.239870] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:01/input/input7 [ 38.259457] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) [ 38.383195] ieee80211_crypt: registered algorithm 'NULL' [ 38.386321] wl: module license 'MIXED/Proprietary' taints kernel. [ 38.396977] ACPI: PCI Interrupt 0000:06:00.0[A] -> GSI 19 (level, low) -> IRQ 18 [ 38.396987] PCI: Setting latency timer of device 0000:06:00.0 to 64 [ 38.413145] ACPI: Battery Slot [BAT1] (battery present) [ 38.582983] ieee80211_crypt: registered algorithm 'TKIP' [ 38.583080] eth1: Broadcom BCM4328 802.11 Wireless Controller 5.10.91.9 [ 38.647278] iTCO_vendor_support: vendor-support=0 [ 38.673837] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.02 (26-Jul-2007) [ 38.673918] iTCO_wdt: Found a ICH8M TCO device (Version=2, TCOBASE=0x1060) [ 38.673955] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) [ 39.139753] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 39.139763] PCI: Setting latency timer of device 0000:01:00.0 to 64 [ 39.139863] NVRM: loading NVIDIA UNIX x86 Kernel Module 169.12 Thu Feb 14 17:53:07 PST 2008 [ 39.141358] input: PC Speaker as /devices/platform/pcspkr/input/input8 [ 39.239013] Linux video capture interface: v2.00 [ 39.283486] sdhci: Secure Digital Host Controller Interface driver [ 39.283489] sdhci: Copyright(c) Pierre Ossman [ 39.283527] sdhci: SDHCI controller found at 0000:08:05.2 [1217:7120] (rev 2) [ 39.283551] ACPI: PCI Interrupt 0000:08:05.2[A] -> GSI 22 (level, low) -> IRQ 22 [ 39.283568] sdhci:slot0: Unknown controller version (2). You may experience problems. [ 39.283611] mmc0: SDHCI at 0xf8002800 irq 22 DMA [ 39.403481] uvcvideo: Found UVC 1.00 device Integrated Webcam (0c45:63e0) [ 39.419093] usbcore: registered new interface driver uvcvideo [ 39.419097] USB Video Class driver (v0.1.0) [ 39.525138] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 22 [ 39.525156] PCI: Setting latency timer of device 0000:00:1b.0 to 64 [ 39.556418] hda_codec: Unknown model for ALC268, trying auto-probe from BIOS... [ 39.563658] input: PS/2 Mouse as /devices/virtual/input/input9 [ 39.646250] input: AlpsPS/2 ALPS GlidePoint as /devices/platform/i8042/serio1/input/input10 [ 39.702461] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2) [ 40.079181] lp: driver loaded but no devices found [ 40.139091] ndiswrapper version 1.52 loaded (smp=yes, preempt=no) [ 40.180329] usbcore: registered new interface driver ndiswrapper [ 40.230652] Adding 2506100k swap on /dev/sda6. Priority:-1 extents:1 across:2506100k [ 40.253930] EXT3 FS on sda5, internal journal [ 41.838407] No dock devices found. [ 42.904444] apm: BIOS not found. [ 43.736215] ppdev: user-space parallel port driver [ 43.933312] audit(1248816641.076:2): type=1503 operation="inode_permission" requested_mask="a::" denied_mask="a::" name="/dev/tty" pid=5406 profile="/usr/sbin/cupsd" namespace="default" [ 45.254985] r8169: eth0: link down [ 46.729984] Bluetooth: Core ver 2.11 [ 46.730345] NET: Registered protocol family 31 [ 46.730348] Bluetooth: HCI device and connection manager initialized [ 46.730351] Bluetooth: HCI socket layer initialized [ 47.795506] Bluetooth: L2CAP ver 2.9 [ 47.795510] Bluetooth: L2CAP socket layer initialized [ 48.087879] Bluetooth: RFCOMM socket layer initialized [ 48.087890] Bluetooth: RFCOMM TTY layer initialized [ 48.087892] Bluetooth: RFCOMM ver 1.8 [ 53.779946] NET: Registered protocol family 10 [ 53.780574] lo: Disabled Privacy Extensions [ 53.781697] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 61.166890] CPU0 attaching NULL sched-domain. [ 61.166900] CPU1 attaching NULL sched-domain. [ 61.186512] CPU0 attaching sched-domain: [ 61.186522] domain 0: span 03 [ 61.186527] groups: 01 02 [ 61.186534] domain 1: span 03 [ 61.186538] groups: 03 [ 61.186543] CPU1 attaching sched-domain: [ 61.186547] domain 0: span 03 [ 61.186550] groups: 02 01 [ 61.186556] domain 1: span 03 [ 61.186559] groups: 03 [ 61.190211] eth1: no IPv6 routers present [ 65.922883] NET: Registered protocol family 17 [ 82.491165] eth1: no IPv6 routers present