unable to install/upgrade package linux-image-2.6.27-7-generic 2.6.27-7.14
Affects | Status | Importance | Assigned to | Milestone | |
---|---|---|---|---|---|
linux (Ubuntu) |
New
|
Undecided
|
wm3 |
Bug Description
i am using ubuntu 8.10 and i was trying to upgrade packages and this was the error msg:
package linux-image-
n0a@ubuntu:~$ uname -a
Linux ubuntu 2.6.27-7-generic #1 SMP Fri Oct 24 06:42:44 UTC 2008 i686 GNU/Linux
n0a@ubuntu:~$ cat /proc/version_
Ubuntu 2.6.27-7.14-generic
n0a@ubuntu:~$ apt-cache policy linux-image-
linux-image-
Installed: 2.6.27-7.14
Candidate: 2.6.27-7.16
Version table:
2.6.27-7.16 0
500 http://
*** 2.6.27-7.14 0
500 http://
100 /var/lib/
W: Unable to locate package 2.6.27-7.14
n0a@ubuntu:~$ dmesg
[ 0.004100] AppArmor: AppArmor initialized
[ 0.004118] Mount-cache hash table entries: 512
[ 0.004390] Initializing cgroup subsys ns
[ 0.004398] Initializing cgroup subsys cpuacct
[ 0.004402] Initializing cgroup subsys memory
[ 0.004434] CPU: Trace cache: 12K uops, L1 D cache: 16K
[ 0.004438] CPU: L2 cache: 1024K
[ 0.004442] CPU: Physical Processor ID: 0
[ 0.004448] using mwait in idle threads.
[ 0.004465] Checking 'hlt' instruction... OK.
[ 0.023209] ACPI: Core revision 20080609
[ 0.026774] ACPI: Checking initramfs for custom DSDT
[ 0.357401] ENABLING IO-APIC IRQs
[ 0.357744] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.398672] CPU0: Intel(R) Pentium(R) 4 CPU 3.06GHz stepping 09
[ 0.400025] Booting processor 1/1 ip 6000
[ 0.004000] Initializing CPU#1
[ 0.004000] Calibrating delay using timer specific routine.. 6152.36 BogoMIPS (lpj=12304739)
[ 0.004000] CPU: Trace cache: 12K uops, L1 D cache: 16K
[ 0.004000] CPU: L2 cache: 1024K
[ 0.004000] CPU: Physical Processor ID: 0
[ 0.484582] CPU1: Intel(R) Pentium(R) 4 CPU 3.06GHz stepping 09
[ 0.484621] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[ 0.488114] Brought up 2 CPUs
[ 0.488122] Total of 2 processors activated (12304.23 BogoMIPS).
[ 0.488196] CPU0 attaching sched-domain:
[ 0.488202] domain 0: span 0-1 level SIBLING
[ 0.488206] groups: 0 1
[ 0.488212] domain 1: span 0-1 level CPU
[ 0.488216] groups: 0-1
[ 0.488224] CPU1 attaching sched-domain:
[ 0.488227] domain 0: span 0-1 level SIBLING
[ 0.488230] groups: 1 0
[ 0.488234] domain 1: span 0-1 level CPU
[ 0.488237] groups: 0-1
[ 0.488436] net_namespace: 840 bytes
[ 0.488436] Booting paravirtualized kernel on bare hardware
[ 0.488461] Time: 9:42:41 Date: 07/04/09
[ 0.488520] NET: Registered protocol family 16
[ 0.488572] EISA bus registered
[ 0.488572] ACPI: bus type pci registered
[ 0.499126] PCI: PCI BIOS revision 2.10 entry at 0xfb0a0, last bus=1
[ 0.499130] PCI: Using configuration type 1 for base access
[ 0.500827] ACPI: EC: Look up EC in DSDT
[ 0.509499] ACPI: Interpreter enabled
[ 0.509506] ACPI: (supports S0 S1 S4 S5)
[ 0.509532] ACPI: Using IOAPIC for interrupt routing
[ 0.516428] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.516428] PCI: 0000:00:00.0 reg 10 32bit mmio: [d0000000, d7ffffff]
[ 0.516466] pci 0000:00:01.0: supports D1
[ 0.516523] PCI: 0000:00:0f.0 reg 10 io port: [b000, b007]
[ 0.516532] PCI: 0000:00:0f.0 reg 14 io port: [b400, b403]
[ 0.516541] PCI: 0000:00:0f.0 reg 18 io port: [b800, b807]
[ 0.516549] PCI: 0000:00:0f.0 reg 1c io port: [bc00, bc03]
[ 0.516558] PCI: 0000:00:0f.0 reg 20 io port: [c000, c00f]
[ 0.516567] PCI: 0000:00:0f.0 reg 24 io port: [c400, c4ff]
[ 0.516650] PCI: 0000:00:0f.1 reg 20 io port: [c800, c80f]
[ 0.516746] PCI: 0000:00:10.0 reg 20 io port: [cc00, cc1f]
[ 0.516775] pci 0000:00:10.0: supports D1
[ 0.516777] pci 0000:00:10.0: supports D2
[ 0.516780] pci 0000:00:10.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.516787] pci 0000:00:10.0: PME# disabled
[ 0.516844] PCI: 0000:00:10.1 reg 20 io port: [d000, d01f]
[ 0.516874] pci 0000:00:10.1: supports D1
[ 0.516876] pci 0000:00:10.1: supports D2
[ 0.516878] pci 0000:00:10.1: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.516884] pci 0000:00:10.1: PME# disabled
[ 0.516941] PCI: 0000:00:10.2 reg 20 io port: [d400, d41f]
[ 0.516970] pci 0000:00:10.2: supports D1
[ 0.516972] pci 0000:00:10.2: supports D2
[ 0.516975] pci 0000:00:10.2: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.516980] pci 0000:00:10.2: PME# disabled
[ 0.517037] PCI: 0000:00:10.3 reg 20 io port: [d800, d81f]
[ 0.517066] pci 0000:00:10.3: supports D1
[ 0.517069] pci 0000:00:10.3: supports D2
[ 0.517071] pci 0000:00:10.3: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.517076] pci 0000:00:10.3: PME# disabled
[ 0.517119] PCI: 0000:00:10.4 reg 10 32bit mmio: [e2000000, e20000ff]
[ 0.517172] pci 0000:00:10.4: supports D1
[ 0.517174] pci 0000:00:10.4: supports D2
[ 0.517176] pci 0000:00:10.4: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.517182] pci 0000:00:10.4: PME# disabled
[ 0.517268] HPET not enabled in BIOS. You might try hpet=force boot option
[ 0.517321] PCI: 0000:00:11.5 reg 10 io port: [dc00, dcff]
[ 0.517376] pci 0000:00:11.5: supports D1
[ 0.517378] pci 0000:00:11.5: supports D2
[ 0.517418] PCI: 0000:00:13.0 reg 10 io port: [e000, e0ff]
[ 0.517427] PCI: 0000:00:13.0 reg 14 32bit mmio: [e2001000, e20010ff]
[ 0.517473] pci 0000:00:13.0: supports D1
[ 0.517476] pci 0000:00:13.0: supports D2
[ 0.517478] pci 0000:00:13.0: PME# supported from D1 D2 D3hot D3cold
[ 0.517484] pci 0000:00:13.0: PME# disabled
[ 0.517546] PCI: 0000:01:00.0 reg 10 32bit mmio: [d8000000, dfffffff]
[ 0.517554] PCI: 0000:01:00.0 reg 14 32bit mmio: [e1000000, e101ffff]
[ 0.517562] PCI: 0000:01:00.0 reg 18 io port: [a000, a07f]
[ 0.517583] PCI: 0000:01:00.0 reg 30 32bit mmio: [0, ffff]
[ 0.517600] pci 0000:01:00.0: supports D1
[ 0.517602] pci 0000:01:00.0: supports D2
[ 0.517646] PCI: bridge 0000:00:01.0 io port: [a000, afff]
[ 0.517651] PCI: bridge 0000:00:01.0 32bit mmio: [e0000000, e1ffffff]
[ 0.517657] PCI: bridge 0000:00:01.0 32bit mmio pref: [d8000000, dfffffff]
[ 0.517668] bus 00 -> node 0
[ 0.517679] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.558307] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 6 7 *10 11 12)
[ 0.558307] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 6 7 10 11 12) *5
[ 0.558307] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 6 7 10 *11 12)
[ 0.560270] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 6 7 10 11 12) *0, disabled.
[ 0.560523] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 6 7 10 11 12) *0, disabled.
[ 0.560776] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 6 7 10 11 12) *0, disabled.
[ 0.561013] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 6 7 10 11 12) *0, disabled.
[ 0.561251] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 6 7 10 11 12) *0, disabled.
[ 0.561600] ACPI: PCI Interrupt Link [ALKA] (IRQs 20) *0
[ 0.561954] ACPI: PCI Interrupt Link [ALKB] (IRQs 21) *0
[ 0.562340] ACPI: PCI Interrupt Link [ALKC] (IRQs 22) *0
[ 0.562691] ACPI: PCI Interrupt Link [ALKD] (IRQs 23) *0, disabled.
[ 0.562787] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 0.562787] pnp: PnP ACPI init
[ 0.562787] ACPI: bus type pnp registered
[ 0.568176] pnp: PnP ACPI: found 13 devices
[ 0.568176] ACPI: ACPI bus type pnp unregistered
[ 0.568176] PnPBIOS: Disabled by ACPI PNP
[ 0.568176] PCI: Using ACPI for IRQ routing
[ 0.576057] NET: Registered protocol family 8
[ 0.576061] NET: Registered protocol family 20
[ 0.576100] NetLabel: Initializing
[ 0.576100] NetLabel: domain hash size = 128
[ 0.576100] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.576100] NetLabel: unlabeled traffic allowed by default
[ 0.577507] tracer: 772 pages allocated for 65536 entries of 48 bytes
[ 0.577511] actual entries 65620
[ 0.578023] AppArmor: AppArmor Filesystem Enabled
[ 0.578055] ACPI: RTC can wake from S4
[ 0.584097] system 00:00: iomem range 0xf0000-0xf3fff could not be reserved
[ 0.584102] system 00:00: iomem range 0xf4000-0xf7fff could not be reserved
[ 0.584105] system 00:00: iomem range 0xf8000-0xfbfff could not be reserved
[ 0.584109] system 00:00: iomem range 0xfc000-0xfffff could not be reserved
[ 0.584112] system 00:00: iomem range 0xfff0000-0xfffffff could not be reserved
[ 0.584117] system 00:00: iomem range 0xffff0000-
[ 0.584120] system 00:00: iomem range 0x0-0x9ffff could not be reserved
[ 0.584123] system 00:00: iomem range 0x100000-0xffeffff could not be reserved
[ 0.584127] system 00:00: iomem range 0xfec00000-
[ 0.584130] system 00:00: iomem range 0xfee00000-
[ 0.584134] system 00:00: iomem range 0xfff80000-
[ 0.584144] system 00:02: ioport range 0x4000-0x407f has been reserved
[ 0.584148] system 00:02: ioport range 0x40f0-0x40ff has been reserved
[ 0.584151] system 00:02: ioport range 0x500-0x50f has been reserved
[ 0.584160] system 00:03: ioport range 0x4d0-0x4d1 has been reserved
[ 0.584163] system 00:03: ioport range 0x880-0x88f has been reserved
[ 0.619885] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
[ 0.619891] pci 0000:00:01.0: IO window: 0xa000-0xafff
[ 0.619899] pci 0000:00:01.0: MEM window: 0xe0000000-
[ 0.619904] pci 0000:00:01.0: PREFETCH window: 0x000000d800000
[ 0.619932] pci 0000:00:01.0: setting latency timer to 64
[ 0.619939] bus: 00 index 0 io port: [0, ffff]
[ 0.619942] bus: 00 index 1 mmio: [0, ffffffff]
[ 0.619945] bus: 01 index 0 io port: [a000, afff]
[ 0.619947] bus: 01 index 1 mmio: [e0000000, e1ffffff]
[ 0.619950] bus: 01 index 2 mmio: [d8000000, dfffffff]
[ 0.619952] bus: 01 index 3 mmio: [0, 0]
[ 0.619979] NET: Registered protocol family 2
[ 0.632244] IP route cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.632648] TCP established hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.632831] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.632964] TCP: Hash tables configured (established 8192 bind 8192)
[ 0.632969] TCP reno registered
[ 0.640309] NET: Registered protocol family 1
[ 0.640512] checking if image is initramfs... it is
[ 1.116819] Switched to high resolution mode on CPU 1
[ 1.120154] Switched to high resolution mode on CPU 0
[ 1.362074] Freeing initrd memory: 8222k freed
[ 1.365920] audit: initializing netlink socket (disabled)
[ 1.366029] type=2000 audit(124670056
[ 1.371477] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 1.375720] VFS: Disk quotas dquot_6.5.1
[ 1.375885] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 1.376123] msgmni has been set to 496
[ 1.376405] io scheduler noop registered
[ 1.376409] io scheduler anticipatory registered
[ 1.376412] io scheduler deadline registered
[ 1.376430] io scheduler cfq registered (default)
[ 1.376470] PCI: VIA PCI bridge detected.Disabling DAC.
[ 1.376584] pci 0000:00:11.0: Bypassing VIA 8237 APIC De-Assert Message
[ 1.376598] pci 0000:01:00.0: Boot video device
[ 1.377332] isapnp: Scanning for PnP cards...
[ 1.729035] isapnp: No Plug & Play device found
[ 1.793484] Serial: 8250/16550 driver4 ports, IRQ sharing enabled
[ 1.793715] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.795218] 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.799028] brd: module loaded
[ 1.799179] input: Macintosh mouse button emulation as /devices/
[ 1.799450] PNP: PS/2 Controller [PNP0303:
[ 1.799984] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.799998] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.804239] mice: PS/2 mouse device common for all mice
[ 1.804555] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
[ 1.804601] rtc0: alarms up to one year, y3k
[ 1.804851] EISA: Probing bus 0 at eisa.0
[ 1.804880] Cannot allocate resource for EISA slot 4
[ 1.804901] EISA: Detected 0 cards.
[ 1.804911] cpuidle: using governor ladder
[ 1.804916] cpuidle: using governor menu
[ 1.805823] TCP cubic registered
[ 1.805896] Using IPI No-Shortcut mode
[ 1.806324] registered taskstats version 1
[ 1.806516] Magic number: 1:941:726
[ 1.806960] rtc_cmos 00:05: setting system clock to 2009-07-04 09:42:43 UTC (1246700563)
[ 1.806967] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 1.806969] EDD information not available.
[ 1.808494] Freeing unused kernel memory: 424k freed
[ 1.808571] Write protecting the kernel text: 2576k
[ 1.808613] Write protecting the kernel read-only data: 936k
[ 1.823197] input: AT Translated Set 2 keyboard as /devices/
[ 1.972216] fuse init (API version 7.9)
[ 2.076048] processor ACPI0007:00: registered as cooling_device0
[ 2.080044] processor ACPI0007:01: registered as cooling_device1
[ 2.696104] No dock devices found.
[ 2.824712] SCSI subsystem initialized
[ 2.906699] usbcore: registered new interface driver usbfs
[ 2.906810] usbcore: registered new interface driver hub
[ 2.906969] usbcore: registered new device driver usb
[ 2.917886] 8139too Fast Ethernet driver 0.9.28
[ 2.918025] 8139too 0000:00:13.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 2.919043] eth0: RealTek RTL8139 at 0xe000, 00:14:85:5d:61:1c, IRQ 18
[ 2.919048] eth0: Identified 8139 chip type 'RTL-8100B/8139D'
[ 2.925902] libata version 3.00 loaded.
[ 2.926219] 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
[ 2.935530] ACPI: PCI Interrupt Link [ALKB] BIOS reported IRQ 0, using IRQ 21
[ 2.935542] ACPI: PCI Interrupt Link [ALKB] enabled at IRQ 21
[ 2.935575] ehci_hcd 0000:00:10.4: PCI INT C -> Link[ALKB] -> GSI 21 (level, low) -> IRQ 21
[ 2.935620] ehci_hcd 0000:00:10.4: EHCI Host Controller
[ 2.935834] ehci_hcd 0000:00:10.4: new USB bus registered, assigned bus number 1
[ 2.935974] ehci_hcd 0000:00:10.4: irq 21, io mem 0xe2000000
[ 2.942899] USB Universal Host Controller Interface driver v3.0
[ 2.947489] ehci_hcd 0000:00:10.4: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 2.948480] usb usb1: configuration #1 chosen from 1 choice
[ 2.948574] hub 1-0:1.0: USB hub found
[ 2.948607] hub 1-0:1.0: 8 ports detected
[ 3.055026] ACPI: PCI Interrupt Link [ALKA] BIOS reported IRQ 0, using IRQ 20
[ 3.055037] ACPI: PCI Interrupt Link [ALKA] enabled at IRQ 20
[ 3.055078] pata_acpi 0000:00:0f.0: PCI INT B -> Link[ALKA] -> GSI 20 (level, low) -> IRQ 20
[ 3.055302] pata_acpi 0000:00:0f.0: PCI INT B disabled
[ 3.055431] pata_acpi 0000:00:0f.1: PCI INT A -> Link[ALKA] -> GSI 20 (level, low) -> IRQ 20
[ 3.055505] pata_acpi 0000:00:0f.1: PCI INT A disabled
[ 3.055563] uhci_hcd 0000:00:10.0: PCI INT A -> Link[ALKB] -> GSI 21 (level, low) -> IRQ 21
[ 3.055581] uhci_hcd 0000:00:10.0: UHCI Host Controller
[ 3.055739] uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 2
[ 3.055810] uhci_hcd 0000:00:10.0: irq 21, io base 0x0000cc00
[ 3.056633] usb usb2: configuration #1 chosen from 1 choice
[ 3.056717] hub 2-0:1.0: USB hub found
[ 3.056754] hub 2-0:1.0: 2 ports detected
[ 3.265637] uhci_hcd 0000:00:10.1: PCI INT A -> Link[ALKB] -> GSI 21 (level, low) -> IRQ 21
[ 3.265680] uhci_hcd 0000:00:10.1: UHCI Host Controller
[ 3.265764] uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 3
[ 3.265847] uhci_hcd 0000:00:10.1: irq 21, io base 0x0000d000
[ 3.266359] usb usb3: configuration #1 chosen from 1 choice
[ 3.266451] hub 3-0:1.0: USB hub found
[ 3.266498] hub 3-0:1.0: 2 ports detected
[ 3.474600] uhci_hcd 0000:00:10.2: PCI INT B -> Link[ALKB] -> GSI 21 (level, low) -> IRQ 21
[ 3.474643] uhci_hcd 0000:00:10.2: UHCI Host Controller
[ 3.474722] uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 4
[ 3.474791] uhci_hcd 0000:00:10.2: irq 21, io base 0x0000d400
[ 3.475265] usb usb4: configuration #1 chosen from 1 choice
[ 3.475347] hub 4-0:1.0: USB hub found
[ 3.475388] hub 4-0:1.0: 2 ports detected
[ 3.681718] uhci_hcd 0000:00:10.3: PCI INT B -> Link[ALKB] -> GSI 21 (level, low) -> IRQ 21
[ 3.681769] uhci_hcd 0000:00:10.3: UHCI Host Controller
[ 3.681893] uhci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 5
[ 3.681958] uhci_hcd 0000:00:10.3: irq 21, io base 0x0000d800
[ 3.682529] usb usb5: configuration #1 chosen from 1 choice
[ 3.682632] hub 5-0:1.0: USB hub found
[ 3.682666] hub 5-0:1.0: 2 ports detected
[ 3.899711] sata_via 0000:00:0f.0: version 2.3
[ 3.899790] sata_via 0000:00:0f.0: PCI INT B -> Link[ALKA] -> GSI 20 (level, low) -> IRQ 20
[ 3.899914] sata_via 0000:00:0f.0: routed to hard irq line 11
[ 3.900847] scsi0 : sata_via
[ 3.907296] scsi1 : sata_via
[ 3.907487] ata1: SATA max UDMA/133 cmd 0xb000 ctl 0xb400 bmdma 0xc000 irq 20
[ 3.907494] ata2: SATA max UDMA/133 cmd 0xb800 ctl 0xbc00 bmdma 0xc008 irq 20
[ 4.112046] ata1: SATA link down 1.5 Gbps (SStatus 0 SControl 300)
[ 4.316048] ata2: SATA link down 1.5 Gbps (SStatus 0 SControl 300)
[ 4.316267] pata_via 0000:00:0f.1: version 0.3.3
[ 4.316317] pata_via 0000:00:0f.1: PCI INT A -> Link[ALKA] -> GSI 20 (level, low) -> IRQ 20
[ 4.316655] scsi2 : pata_via
[ 4.317415] scsi3 : pata_via
[ 4.317498] ata3: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xc800 irq 14
[ 4.317502] ata4: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xc808 irq 15
[ 9.472193] ata3.00: qc timeout (cmd 0xec)
[ 9.472210] ata3.00: failed to IDENTIFY (I/O error, err_mask=0x4)
[ 18.596404] ata3.00: HPA unlocked: 156299375 -> 156301488, native 156301488
[ 18.596416] ata3.00: ATA-7: MAXTOR STM3802110A, 3.AAK, max UDMA/100
[ 18.596420] ata3.00: 156301488 sectors, multi 16: LBA48
[ 19.423714] ata3.00: configured for UDMA/100
[ 19.584441] ata4.01: ATAPI: SAMSUNG CD-R/RW DRIVE SW-208B, V:00BS04, max MWDMA2
[ 19.600323] ata4.01: configured for MWDMA2
[ 19.600667] scsi 2:0:0:0: Direct-Access ATA MAXTOR STM380211 3.AA PQ: 0 ANSI: 5
[ 19.601985] scsi 3:0:1:0: CD-ROM SAMSUNG CD-R/RW SW-208B BS04 PQ: 0 ANSI: 5
[ 19.621916] scsi 2:0:0:0: Attached scsi generic sg0 type 0
[ 19.622074] scsi 3:0:1:0: Attached scsi generic sg1 type 5
[ 19.662740] Driver 'sd' needs updating - please use bus_type methods
[ 19.663400] sd 2:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB)
[ 19.663448] sd 2:0:0:0: [sda] Write Protect is off
[ 19.663454] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 19.663527] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 19.663727] sd 2:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB)
[ 19.663793] sd 2:0:0:0: [sda] Write Protect is off
[ 19.663799] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 19.663898] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 19.663911] sda:<4>Driver 'sr' needs updating - please use bus_type methods
[ 25.143380] sda1 sda2 < sda5 sda6 sda7 >
[ 25.187220] sd 2:0:0:0: [sda] Attached SCSI disk
[ 25.207147] sr0: scsi3-mmc drive: 8x/32x writer cd/rw xa/form2 cdda tray
[ 25.207173] Uniform CD-ROM driver Revision: 3.20
[ 25.207568] sr 3:0:1:0: Attached scsi CD-ROM sr0
[ 27.664153] loop: module loaded
[ 28.620369] EXT3-fs: INFO: recovery required on readonly filesystem.
[ 28.620380] EXT3-fs: write access will be enabled during recovery.
[ 32.883152] kjournald starting. Commit interval 5 seconds
[ 32.883240] EXT3-fs: recovery complete.
[ 32.883328] EXT3-fs: mounted filesystem with ordered data mode.
[ 52.296764] udevd version 124 started
[ 65.700677] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 65.735931] input: Power Button (FF) as /devices/
[ 65.765668] Linux agpgart interface v0.103
[ 65.797194] ACPI: Power Button (FF) [PWRF]
[ 65.797387] input: Power Button (CM) as /devices/
[ 65.865189] ACPI: Power Button (CM) [PWRB]
[ 65.917558] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 65.961738] agpgart: Detected VIA VT3314 chipset
[ 65.993698] agpgart-via 0000:00:00.0: AGP aperture is 128M @ 0xd0000000
[ 66.011362] input: PC Speaker as /devices/
[ 67.197736] input: ImPS/2 Generic Wheel Mouse as /devices/
[ 67.215127] parport_pc 00:0a: reported by Plug and Play ACPI
[ 67.215198] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
[ 69.488215] ACPI: PCI Interrupt Link [ALKC] BIOS reported IRQ 0, using IRQ 22
[ 69.488222] ACPI: PCI Interrupt Link [ALKC] enabled at IRQ 22
[ 69.488243] VIA 82xx Audio 0000:00:11.5: PCI INT C -> Link[ALKC] -> GSI 22 (level, low) -> IRQ 22
[ 69.488426] VIA 82xx Audio 0000:00:11.5: setting latency timer to 64
[ 77.716060] lp0: using parport0 (interrupt-driven).
[ 84.099489] EXT3 FS on loop0, internal journal
[ 112.500585] kjournald starting. Commit interval 5 seconds
[ 112.500628] EXT3 FS on loop1, internal journal
[ 112.500637] EXT3-fs: mounted filesystem with ordered data mode.
[ 112.501469] kjournald starting. Commit interval 5 seconds
[ 112.501505] EXT3 FS on loop2, internal journal
[ 112.501512] EXT3-fs: mounted filesystem with ordered data mode.
[ 114.871109] Adding 976552k swap on /host/ubuntu/
[ 139.311822] type=1505 audit(124669350
[ 139.550955] type=1505 audit(124669350
[ 139.552115] type=1505 audit(124669350
[ 148.862076] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 154.476857] ACPI: WMI: Mapper loaded
[ 199.471416] warning: `avahi-daemon' uses 32-bit capabilities (legacy support in use)
[ 199.541912] apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac)
[ 199.541924] apm: disabled - APM is not SMP safe.
[ 199.742137] ppdev: user-space parallel port driver
[ 216.654600] Bluetooth: Core ver 2.13
[ 216.658618] NET: Registered protocol family 31
[ 216.658628] Bluetooth: HCI device and connection manager initialized
[ 216.658641] Bluetooth: HCI socket layer initialized
[ 216.688466] Bluetooth: L2CAP ver 2.11
[ 216.688477] Bluetooth: L2CAP socket layer initialized
[ 216.852572] Bluetooth: SCO (Voice Link) ver 0.6
[ 216.852602] Bluetooth: SCO socket layer initialized
[ 216.871630] Bluetooth: RFCOMM socket layer initialized
[ 216.871712] Bluetooth: RFCOMM TTY layer initialized
[ 216.871718] Bluetooth: RFCOMM ver 1.10
[ 216.927992] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 216.928005] Bluetooth: BNEP filters: protocol multicast
[ 217.083672] Bridge firewalling registered
[ 217.084264] pan0: Dropping NETIF_F_UFO since no NETIF_F_HW_CSUM feature.
[ 221.045064] eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
[ 227.697263] NET: Registered protocol family 17
[ 231.855149] [drm] Initialized drm 1.1.0 20060810
[ 231.879236] pci 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 231.879255] pci 0000:01:00.0: setting latency timer to 64
[ 231.881910] [drm] Initialized sis 1.3.0 20070626 on minor 0
[ 231.886314] agpgart-via 0000:00:00.0: AGP 3.5 bridge
[ 231.886463] agpgart-via 0000:00:00.0: bridge is in legacy mode, falling back to 2.x
[ 231.886482] agpgart-via 0000:00:00.0: putting AGP V2 device into 0x mode
[ 231.886616] pci 0000:01:00.0: putting AGP V2 device into 0x mode
[ 238.498134] agpgart-via 0000:00:00.0: AGP 3.5 bridge
[ 238.498220] agpgart-via 0000:00:00.0: bridge is in legacy mode, falling back to 2.x
[ 238.498238] agpgart-via 0000:00:00.0: putting AGP V2 device into 0x mode
[ 238.498368] pci 0000:01:00.0: putting AGP V2 device into 0x mode
[ 245.342494] NET: Registered protocol family 10
[ 245.347566] lo: Disabled Privacy Extensions
[ 255.976033] eth0: no IPv6 routers present
[ 3038.122013] type=1503 audit(124669639
[ 3039.421143] type=1503 audit(124669640
[ 3039.421300] type=1503 audit(124669640
[ 3039.421327] type=1503 audit(124669640
[ 3039.421367] type=1503 audit(124669640
[ 3039.421383] type=1503 audit(124669640
[ 3039.421400] type=1503 audit(124669640
[ 3039.421416] type=1503 audit(124669640
[ 3039.421432] type=1503 audit(124669640
[ 3039.421452] type=1503 audit(124669640
[ 3039.474894] ppdev0: registered pardevice
[ 3039.524054] ppdev0: unregistered pardevice
[ 3043.284922] ppdev0: registered pardevice
[ 3043.332465] ppdev0: unregistered pardevice
[ 3044.451532] ppdev0: registered pardevice
[ 3044.500558] ppdev0: unregistered pardevice
[ 5663.771929] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 5663.771949] ata3.00: BMDMA stat 0x25
[ 5663.771963] ata3.00: cmd c8/00:38:
[ 5663.771968] res 51/40:00:
[ 5663.771979] ata3.00: status: { DRDY ERR }
[ 5663.771983] ata3.00: error: { UNC }
[ 5663.914175] ata3.00: configured for UDMA/100
[ 5663.914233] ata3: EH complete
[ 5664.821163] sd 2:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB)
[ 5664.821575] sd 2:0:0:0: [sda] Write Protect is off
[ 5664.821581] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 5664.821802] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 7374.992176] __ratelimit: 3 callbacks suppressed
[ 7374.992207] mission-
[ 8876.917377] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 8876.917393] ata3.00: BMDMA stat 0x25
[ 8876.917410] ata3.00: cmd c8/00:b0:
[ 8876.917413] res 51/40:00:
[ 8876.917420] ata3.00: status: { DRDY ERR }
[ 8876.917423] ata3.00: error: { UNC }
[ 8877.059635] ata3.00: configured for UDMA/100
[ 8877.059685] ata3: EH complete
[ 8879.303981] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 8879.303992] ata3.00: BMDMA stat 0x25
[ 8879.304001] ata3.00: cmd c8/00:b0:
[ 8879.304003] res 51/40:00:
[ 8879.304024] ata3.00: status: { DRDY ERR }
[ 8879.304027] ata3.00: error: { UNC }
[ 8879.437912] ata3.00: configured for UDMA/100
[ 8879.437967] ata3: EH complete
[ 8881.099987] sd 2:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB)
[ 8881.114816] sd 2:0:0:0: [sda] Write Protect is off
[ 8881.114828] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 8881.114926] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 8881.115014] sd 2:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB)
[ 8881.115043] sd 2:0:0:0: [sda] Write Protect is off
[ 8881.115047] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 8881.115099] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
n0a@ubuntu:~$ sudo lspci -vnvn
[sudo] password for n0a:
00:00.0 Host bridge [0600]: VIA Technologies, Inc. CN700/VN800/
Subsystem: Device [1940:5000]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 8
Region 0: Memory at d0000000 (32-bit, prefetchable) [size=128M]
Capabilities: [80] AGP version 3.5
Status: RQ=8 Iso- ArqSz=0 Cal=0 SBA+ ITACoh- GART64- HTrans- 64bit- FW- AGP3- Rate=x1,x2,x4
Command: RQ=1 ArqSz=0 Cal=0 SBA+ AGP+ GART64- 64bit- FW- Rate=<none>
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: agpgart-via
Kernel modules: via-agp
00:00.1 Host bridge [0600]: VIA Technologies, Inc. CN700/VN800/
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
00:00.2 Host bridge [0600]: VIA Technologies, Inc. CN700/VN800/
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
00:00.3 Host bridge [0600]: VIA Technologies, Inc. PT890 Host Bridge [1106:3208]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Kernel modules: via-agp
00:00.4 Host bridge [0600]: VIA Technologies, Inc. CN700/VN800/
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
00:00.7 Host bridge [0600]: VIA Technologies, Inc. CN700/VN800/
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
00:01.0 PCI bridge [0604]: VIA Technologies, Inc. VT8237/VX700 PCI Bridge [1106:b198]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 0000a000-0000afff
Memory behind bridge: e0000000-e1ffffff
Prefetchable memory behind bridge: d8000000-dfffffff
Secondary status: 66MHz+ FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR+ <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [70] Power Management version 2
Flags: PMEClk- DSI- D1+ D2- AuxCurrent=0mA PME(D0-
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Kernel modules: shpchp
00:0f.0 IDE interface [0101]: VIA Technologies, Inc. VIA VT6420 SATA RAID Controller [1106:3149] (rev 80) (prog-if 8f [Master SecP SecO PriP PriO])
Subsystem: Device [1940:b003]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32
Interrupt: pin B routed to IRQ 20
Region 0: I/O ports at b000 [size=8]
Region 1: I/O ports at b400 [size=4]
Region 2: I/O ports at b800 [size=8]
Region 3: I/O ports at bc00 [size=4]
Region 4: I/O ports at c000 [size=16]
Region 5: I/O ports at c400 [size=256]
Capabilities: [c0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: sata_via
Kernel modules: sata_via
00:0f.1 IDE interface [0101]: VIA Technologies, Inc. VT82C586A/
Subsystem: Device [1940:5002]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32
Interrupt: pin A routed to IRQ 20
Region 0: [virtual] Memory at 000001f0 (32-bit, non-prefetchable) [size=8]
Region 1: [virtual] Memory at 000003f0 (type 3, non-prefetchable) [size=1]
Region 2: [virtual] Memory at 00000170 (32-bit, non-prefetchable) [size=8]
Region 3: [virtual] Memory at 00000370 (type 3, non-prefetchable) [size=1]
Region 4: I/O ports at c800 [size=16]
Capabilities: [c0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: pata_via
Kernel modules: pata_via
00:10.0 USB Controller [0c03]: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller [1106:3038] (rev 81)
Subsystem: Device [1940:5004]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 21
Region 4: I/O ports at cc00 [size=32]
Capabilities: [80] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0+
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:10.1 USB Controller [0c03]: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller [1106:3038] (rev 81)
Subsystem: Device [1940:5004]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 21
Region 4: I/O ports at d000 [size=32]
Capabilities: [80] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0+
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:10.2 USB Controller [0c03]: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller [1106:3038] (rev 81)
Subsystem: Device [1940:5004]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32, Cache Line Size: 32 bytes
Interrupt: pin B routed to IRQ 21
Region 4: I/O ports at d400 [size=32]
Capabilities: [80] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0+
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:10.3 USB Controller [0c03]: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller [1106:3038] (rev 81)
Subsystem: Device [1940:5004]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32, Cache Line Size: 32 bytes
Interrupt: pin B routed to IRQ 21
Region 4: I/O ports at d800 [size=32]
Capabilities: [80] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0+
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:10.4 USB Controller [0c03]: VIA Technologies, Inc. USB 2.0 [1106:3104] (rev 86) (prog-if 20)
Subsystem: Device [1940:5004]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32, Cache Line Size: 128 bytes
Interrupt: pin C routed to IRQ 21
Region 0: Memory at e2000000 (32-bit, non-prefetchable) [size=256]
Capabilities: [80] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0+
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: ehci_hcd
Kernel modules: ehci-hcd
00:11.0 ISA bridge [0601]: VIA Technologies, Inc. VT8237 ISA bridge [KT600/
Subsystem: Device [1940:5001]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: [c0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Kernel modules: i2c-viapro
00:11.5 Multimedia audio controller [0401]: VIA Technologies, Inc. VT8233/A/8235/8237 AC97 Audio Controller [1106:3059] (rev 60)
Subsystem: Device [1940:a002]
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin C routed to IRQ 22
Region 0: I/O ports at dc00 [size=256]
Capabilities: [c0] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: VIA 82xx Audio
Kernel modules: snd-via82xx
00:13.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL-8139/
Subsystem: Device [1940:e000]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (8000ns min, 16000ns max)
Interrupt: pin A routed to IRQ 18
Region 0: I/O ports at e000 [size=256]
Region 1: Memory at e2001000 (32-bit, non-prefetchable) [size=256]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0-
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: 8139too
Kernel modules: 8139cp, 8139too
01:00.0 VGA compatible controller [0300]: Silicon Integrated Systems [SiS] 300/305 PCI/AGP VGA Display Adapter [1039:0300] (rev 90)
Subsystem: Silicon Integrated Systems [SiS] 300/305 PCI/AGP VGA Display Adapter [1039:0300]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin A routed to IRQ 16
BIST result: 02
Region 0: Memory at d8000000 (32-bit, prefetchable) [size=128M]
Region 1: Memory at e1000000 (32-bit, non-prefetchable) [size=128K]
Region 2: I/O ports at a000 [size=128]
[virtual] Expansion ROM at e0000000 [disabled] [size=64K]
Capabilities: [40] Power Management version 1
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [50] AGP version 1.0
Status: RQ=16 Iso- ArqSz=0 Cal=0 SBA+ ITACoh- GART64- HTrans- 64bit- FW- AGP3- Rate=x1,x2
Command: RQ=8 ArqSz=0 Cal=0 SBA+ AGP+ GART64- 64bit- FW- Rate=<none>
Kernel modules: sisfb
n0a@ubuntu:~$ exit
ProblemType: Package
Architecture: i386
DistroRelease: Ubuntu 8.10
ErrorMessage: unable to make backup link of `./boot/
LsUsb:
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Package: linux-image-
ProcCmdLine: User Name=UUID=B48B-0F86 loop=/hostname/
ProcVersionSign
SourcePackage: linux
Title: package linux-image-
This looks to be a duplicate of bug 252900 so I am marking it as such. Please continue to track this issue at that report. Thanks.