This is a pre-release version of the X server from The X.Org Foundation. It is not supported in any way. Bugs may be filed in the bugzilla at http://bugs.freedesktop.org/. Select the "xorg" product for bugs you find in this release. Before reporting bugs in pre-release versions please check the latest version in the X.Org Foundation git repository. See http://wiki.x.org/wiki/GitPage for git access instructions. X.Org X Server 1.6.1.901 (1.6.2 RC 1) Release Date: 2009-5-8 X Protocol Version 11, Revision 0 Build Operating System: Linux 2.6.24-23-server x86_64 Ubuntu Current Operating System: Linux kigari 2.6.30-10-generic #12-Ubuntu SMP Mon Jun 22 16:30:32 UTC 2009 x86_64 Build Date: 24 June 2009 10:38:32PM xorg-server 2:1.6.1.901-2ubuntu2 (buildd@crested.buildd) Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: "/var/log/Xorg.0.log", Time: Sat Jun 27 09:59:45 2009 (==) Using config file: "/etc/X11/xorg.conf" (==) No Layout section. Using the first Screen section. (**) |-->Screen "Default Screen" (0) (**) | |-->Monitor "Configured Monitor" (**) | |-->Device "Configured Video Device" (==) Automatically adding devices (==) Automatically enabling devices (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist. Entry deleted from font path. (==) FontPath set to: /usr/share/fonts/X11/misc, /usr/share/fonts/X11/100dpi/:unscaled, /usr/share/fonts/X11/75dpi/:unscaled, /usr/share/fonts/X11/Type1, /usr/share/fonts/X11/100dpi, /usr/share/fonts/X11/75dpi, /var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType, built-ins (==) ModulePath set to "/usr/lib/xorg/modules" (II) Cannot locate a core pointer device. (II) Cannot locate a core keyboard device. (II) The server relies on HAL to provide the list of input devices. If no devices become available, reconfigure HAL or disable AllowEmptyInput. (II) Loader magic: 0xb40 (II) Module ABI versions: X.Org ANSI C Emulation: 0.4 X.Org Video Driver: 5.0 X.Org XInput driver : 4.0 X.Org Server Extension : 2.0 (II) Loader running on linux (++) using VT number 7 (--) PCI:*(0@1:0:0) nVidia Corporation GeForce 8800 GT rev 162, Mem @ 0xfd000000/16777216, 0xd0000000/268435456, 0xfa000000/33554432, I/O @ 0x0000cc00/128, BIOS @ 0x????????/131072 (II) Open ACPI successful (/var/run/acpid.socket) (II) System resource ranges: [0] -1 0 0xffffffff - 0xffffffff (0x1) MX[B] [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [5] -1 0 0x00000000 - 0x00000000 (0x1) IX[B] (WW) "dri2" will not be loaded unless you've specified it to be loaded elsewhere. (II) "extmod" will be loaded by default. (II) "dbe" will be loaded by default. (II) "glx" will be loaded. This was enabled by default and also specified in the config file. (II) "record" will be loaded by default. (II) "dri" will be loaded by default. (II) "dri2" will be loaded even though the default is to disable it. (II) LoadModule: "glx" (II) Loading /usr/lib/xorg/modules/extensions//libglx.so (II) Module glx: vendor="NVIDIA Corporation" compiled for 4.0.2, module version = 1.0.0 Module class: X.Org Server Extension (II) NVIDIA GLX Module 180.60 Mon May 11 15:53:29 PDT 2009 (II) Loading extension GLX (II) LoadModule: "extmod" (II) Loading /usr/lib/xorg/modules/extensions//libextmod.so (II) Module extmod: vendor="X.Org Foundation" compiled for 1.6.1.901, module version = 1.0.0 Module class: X.Org Server Extension ABI class: X.Org Server Extension, version 2.0 (II) Loading extension MIT-SCREEN-SAVER (II) Loading extension XFree86-VidModeExtension (II) Loading extension XFree86-DGA (II) Loading extension DPMS (II) Loading extension XVideo (II) Loading extension XVideo-MotionCompensation (II) Loading extension X-Resource (II) LoadModule: "dbe" (II) Loading /usr/lib/xorg/modules/extensions//libdbe.so (II) Module dbe: vendor="X.Org Foundation" compiled for 1.6.1.901, module version = 1.0.0 Module class: X.Org Server Extension ABI class: X.Org Server Extension, version 2.0 (II) Loading extension DOUBLE-BUFFER (II) LoadModule: "record" (II) Loading /usr/lib/xorg/modules/extensions//librecord.so (II) Module record: vendor="X.Org Foundation" compiled for 1.6.1.901, module version = 1.13.0 Module class: X.Org Server Extension ABI class: X.Org Server Extension, version 2.0 (II) Loading extension RECORD (II) LoadModule: "dri" (II) Loading /usr/lib/xorg/modules/extensions//libdri.so (II) Module dri: vendor="X.Org Foundation" compiled for 1.6.1.901, module version = 1.0.0 ABI class: X.Org Server Extension, version 2.0 (II) Loading extension XFree86-DRI (II) LoadModule: "nvidia" (II) Loading /usr/lib/xorg/modules/drivers//nvidia_drv.so (II) Module nvidia: vendor="NVIDIA Corporation" compiled for 4.0.2, module version = 1.0.0 Module class: X.Org Video Driver (II) NVIDIA dlloader X Driver 180.60 Mon May 11 15:33:16 PDT 2009 (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs (II) Primary Device is: PCI 01@00:00:0 (II) Loading sub module "fb" (II) LoadModule: "fb" (II) Loading /usr/lib/xorg/modules//libfb.so (II) Module fb: vendor="X.Org Foundation" compiled for 1.6.1.901, module version = 1.0.0 ABI class: X.Org ANSI C Emulation, version 0.4 (II) Loading sub module "wfb" (II) LoadModule: "wfb" (II) Loading /usr/lib/xorg/modules//libwfb.so (II) Module wfb: vendor="X.Org Foundation" compiled for 1.6.1.901, module version = 1.0.0 ABI class: X.Org ANSI C Emulation, version 0.4 (II) Loading sub module "ramdac" (II) LoadModule: "ramdac" (II) Module "ramdac" already built-in (II) resource ranges after probing: [0] -1 0 0xffffffff - 0xffffffff (0x1) MX[B] [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [5] -1 0 0x00000000 - 0x00000000 (0x1) IX[B] (II) NVIDIA(0): Creating default Display subsection in Screen section "Default Screen" for depth/fbbpp 24/32 (**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32 (==) NVIDIA(0): RGB weight 888 (==) NVIDIA(0): Default visual is TrueColor (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0) (**) NVIDIA(0): Enabling RENDER acceleration (II) NVIDIA(0): Support for GLX with the Damage and Composite X extensions is (II) NVIDIA(0): enabled. (II) NVIDIA(0): NVIDIA GPU GeForce 8800 GT (G92) at PCI:1:0:0 (GPU-0) (--) NVIDIA(0): Memory: 524288 kBytes (--) NVIDIA(0): VideoBIOS: 62.92.23.00.00 (II) NVIDIA(0): Detected PCI Express Link width: 16X (--) NVIDIA(0): Interlaced video modes are supported on this GPU (--) NVIDIA(0): Connected display device(s) on GeForce 8800 GT at PCI:1:0:0: (--) NVIDIA(0): HP w2207 (DFP-0) (--) NVIDIA(0): HP w2207 (DFP-0): 330.0 MHz maximum pixel clock (--) NVIDIA(0): HP w2207 (DFP-0): Internal Dual Link TMDS (WW) NVIDIA(0): The EDID for HP w2207 (DFP-0) contradicts itself: mode (WW) NVIDIA(0): "720x480" is specified in the EDID; however, the EDID's (WW) NVIDIA(0): valid HorizSync range (24.000-83.000 kHz) would exclude (WW) NVIDIA(0): this mode's HorizSync (15.7 kHz); ignoring HorizSync check (WW) NVIDIA(0): for mode "720x480". (WW) NVIDIA(0): The EDID for HP w2207 (DFP-0) contradicts itself: mode (WW) NVIDIA(0): "720x576" is specified in the EDID; however, the EDID's (WW) NVIDIA(0): valid HorizSync range (24.000-83.000 kHz) would exclude (WW) NVIDIA(0): this mode's HorizSync (15.6 kHz); ignoring HorizSync check (WW) NVIDIA(0): for mode "720x576". (WW) NVIDIA(0): The EDID for HP w2207 (DFP-0) contradicts itself: mode (WW) NVIDIA(0): "720x480" is specified in the EDID; however, the EDID's (WW) NVIDIA(0): valid HorizSync range (24.000-83.000 kHz) would exclude (WW) NVIDIA(0): this mode's HorizSync (15.7 kHz); ignoring HorizSync check (WW) NVIDIA(0): for mode "720x480". (WW) NVIDIA(0): The EDID for HP w2207 (DFP-0) contradicts itself: mode (WW) NVIDIA(0): "720x576" is specified in the EDID; however, the EDID's (WW) NVIDIA(0): valid HorizSync range (24.000-83.000 kHz) would exclude (WW) NVIDIA(0): this mode's HorizSync (15.6 kHz); ignoring HorizSync check (WW) NVIDIA(0): for mode "720x576". (II) NVIDIA(0): Assigned Display Device: DFP-0 (==) NVIDIA(0): (==) NVIDIA(0): No modes were requested; the default mode "nvidia-auto-select" (==) NVIDIA(0): will be used as the requested mode. (==) NVIDIA(0): (II) NVIDIA(0): Validated modes: (II) NVIDIA(0): "nvidia-auto-select" (II) NVIDIA(0): Virtual screen size determined to be 1680 x 1050 (--) NVIDIA(0): DPI set to (90, 88); computed from "UseEdidDpi" X config (--) NVIDIA(0): option (==) NVIDIA(0): Enabling 32-bit ARGB GLX visuals. (--) Depth 24 pixmap format is 32 bpp (II) do I need RAC? No, I don't. (II) resource ranges after preInit: [0] -1 0 0xffffffff - 0xffffffff (0x1) MX[B] [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [5] -1 0 0x00000000 - 0x00000000 (0x1) IX[B] (II) NVIDIA(0): Initialized GPU GART. (II) NVIDIA(0): Setting mode "nvidia-auto-select" (II) Loading extension NV-GLX (II) NVIDIA(0): NVIDIA 3D Acceleration Architecture Initialized (==) NVIDIA(0): Disabling shared memory pixmaps (II) NVIDIA(0): Using the NVIDIA 2D acceleration architecture (==) NVIDIA(0): Backing store disabled (==) NVIDIA(0): Silken mouse enabled (II) NVIDIA(0): DPMS enabled (II) Loading extension NV-CONTROL (II) Loading extension XINERAMA (==) RandR enabled (II) Initializing built-in extension Generic Event Extension (II) Initializing built-in extension SHAPE (II) Initializing built-in extension MIT-SHM (II) Initializing built-in extension XInputExtension (II) Initializing built-in extension XTEST (II) Initializing built-in extension BIG-REQUESTS (II) Initializing built-in extension SYNC (II) Initializing built-in extension XKEYBOARD (II) Initializing built-in extension XC-MISC (II) Initializing built-in extension SECURITY (II) Initializing built-in extension XINERAMA (II) Initializing built-in extension XFIXES (II) Initializing built-in extension RENDER (II) Initializing built-in extension RANDR (II) Initializing built-in extension COMPOSITE (II) Initializing built-in extension DAMAGE (II) Initializing extension GLX (II) config/hal: Adding input device UVC Camera (046d:0990) (II) LoadModule: "evdev" (II) Loading /usr/lib/xorg/modules/input//evdev_drv.so (II) Module evdev: vendor="X.Org Foundation" compiled for 1.6.0, module version = 2.2.2 Module class: X.Org XInput Driver ABI class: X.Org XInput driver, version 4.0 (**) UVC Camera (046d:0990): always reports core events (**) UVC Camera (046d:0990): Device: "/dev/input/event7" (II) UVC Camera (046d:0990): Found keys (II) UVC Camera (046d:0990): Configuring as keyboard (II) XINPUT: Adding extended input device "UVC Camera (046d:0990)" (type: KEYBOARD) (**) Option "xkb_rules" "evdev" (**) Option "xkb_model" "pc105" (**) Option "xkb_layout" "us" (II) config/hal: Adding input device Power Button (**) Power Button: always reports core events (**) Power Button: Device: "/dev/input/event1" (II) Power Button: Found keys (II) Power Button: Configuring as keyboard (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD) (**) Option "xkb_rules" "evdev" (**) Option "xkb_model" "pc105" (**) Option "xkb_layout" "us" (II) config/hal: Adding input device Power Button (**) Power Button: always reports core events (**) Power Button: Device: "/dev/input/event0" (II) Power Button: Found keys (II) Power Button: Configuring as keyboard (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD) (**) Option "xkb_rules" "evdev" (**) Option "xkb_model" "pc105" (**) Option "xkb_layout" "us" (II) config/hal: Adding input device Chicony PFU-65 USB Keyboard (**) Chicony PFU-65 USB Keyboard: always reports core events (**) Chicony PFU-65 USB Keyboard: Device: "/dev/input/event4" (II) Chicony PFU-65 USB Keyboard: Found keys (II) Chicony PFU-65 USB Keyboard: Configuring as keyboard (II) XINPUT: Adding extended input device "Chicony PFU-65 USB Keyboard" (type: KEYBOARD) (**) Option "xkb_rules" "evdev" (**) Option "xkb_model" "pc105" (**) Option "xkb_layout" "us" (II) config/hal: Adding input device Macintosh mouse button emulation (**) Macintosh mouse button emulation: always reports core events (**) Macintosh mouse button emulation: Device: "/dev/input/event2" (II) Macintosh mouse button emulation: Found 3 mouse buttons (II) Macintosh mouse button emulation: Found x and y relative axes (II) Macintosh mouse button emulation: Configuring as mouse (**) Macintosh mouse button emulation: YAxisMapping: buttons 4 and 5 (**) Macintosh mouse button emulation: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200 (II) XINPUT: Adding extended input device "Macintosh mouse button emulation" (type: MOUSE) (**) Macintosh mouse button emulation: (accel) keeping acceleration scheme 1 (**) Macintosh mouse button emulation: (accel) filter chain progression: 2.00 (**) Macintosh mouse button emulation: (accel) filter stage 0: 20.00 ms (**) Macintosh mouse button emulation: (accel) set acceleration profile 0 (II) config/hal: Adding input device Logitech USB Gaming Mouse (**) Logitech USB Gaming Mouse: always reports core events (**) Logitech USB Gaming Mouse: Device: "/dev/input/event3" (II) Logitech USB Gaming Mouse: Found 16 mouse buttons (II) Logitech USB Gaming Mouse: Found x and y relative axes (II) Logitech USB Gaming Mouse: Found scroll wheel(s) (II) Logitech USB Gaming Mouse: Configuring as mouse (**) Logitech USB Gaming Mouse: YAxisMapping: buttons 4 and 5 (**) Logitech USB Gaming Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200 (II) XINPUT: Adding extended input device "Logitech USB Gaming Mouse" (type: MOUSE) (**) Logitech USB Gaming Mouse: (accel) keeping acceleration scheme 1 (**) Logitech USB Gaming Mouse: (accel) filter chain progression: 2.00 (**) Logitech USB Gaming Mouse: (accel) filter stage 0: 20.00 ms (**) Logitech USB Gaming Mouse: (accel) set acceleration profile 0 (II) NVIDIA(0): Setting mode "1680x1050_60_0"